ÖVERUM P L O U G H S B Y FA R M G A R D
FULLY MOUNTED CONVENTIONAL PLOUGHS CT
> överum ct 4975 f, with shear bolt protection
> the frame design is simple and strong with good clearance
> low profile rubber wheel with tractor thread means good support in soft going, resulting in uniform depth
A new series of fully mounted conventional ploughs with strong design and good clearance
Tractor thread rubber wheel or steel wheel (accessories)
The ÖVERUM CT-series consists of models from 2 – 5 furrows with fully
The new low profile tyre with tractor thread keeps rolling even in
automatic hydraulic stonerelease system (H), or fixed beam version
difficult conditions, and therefore gives better support and uniform
with shear bolts (F). ÖVERUM CT is designed with focus on strength
working depth. The pneumatic rubber wheel runs softly as a shock
and clearance, for long life and trouble-free operation. Long interbody
absorber while the steel wheel is recommended where the risk of
clearance gives free flow for crop residues and enough room for
puncture is important, (hedges with spines etc).
modern effective skimmers. The frame design is simple and strong. The furrow width adjustment in three steps is solid and maintenance free,
The XL-body – Low draft requirement
14, 16 or 18 inch (35, 40 or 45 cm).
With ÖVERUM XL the plough pulls easy. Wide furrows can be ploughed shallow or deep with good result. Choose the working
Improved stone release system
depth according to soil type, amount of straw, weed conditions etc.
The CT-series has been equipped with the well-approved stone release technique from the ÖVERUM reversible ploughs. That implies better
New spring loaded disc coulter
geometry with increased maximum lifting height and a substantially
In the new concept the disc coulter follows the body out of the soil
decreasing force on the plough body the further it releases. Besides
when releasing for stones. The disc coulter is better protected and
that, the start force can be set higher than the previous system.
it is also better for combining the discs with skimmers. Despite this the disc coulter has an individual spring loading for protection and help for the plough to maintain desired working depth in hard conditions.
ÖVERUM CT CONVENTIONAL FULLY MOUNTED PLOUGHS CT2975 H
CT3975 H
CT4975 H
CT5975 H
CT2975 F
CT3975 F
CT45975 F
CT5975 F
2
3
4
5
2
3
4
5
70-90
105-135
140-180
175-225
70-90
105-135
140-180
175-225
Weight (kg)
465
660
850
1025
425
570
725
870
Inter body clearance (cm)
90
90
90
90
90
90
90
90
Under beam clearance (cm)
75 (80)
75 (80)
75 (80)
75 (80)
75 (80)
75 (80)
75 (80)
75 (80)
Disc coulters possible to fit
2
3
4
5
2
3
4
5
50-80
70-110
90-150
100-150
50-80
60-100
70-120
90-150
1
1
1
-
1
1
1
-
Number of furrows
Working width (cm)
Recommended tractor power (HP) Extention furrow
FOR YOUR NEAREST FA R M G A R D D E A L E R P L E A S E C O N TA C T
NDC : 21 Andrew Baxter Drive Mangere Manukau 2022 PO Box 13-354 Auckland 1643 NZ T. 09 275 5555 // F. 09 256 2220 SDC : 8 Redcastle Road Oamaru 9400 NZ T. 03 437 9000 // F. 03 437 9100 sales@farmgard.co.nz farmgard.co.nz
TRUSTED AND PROVEN BRANDS : BERTI // CELLI // STANHAY // FARMGARD RZ RANGE // AB RANGE // ÖVERUM // REMAC PERUZZO // BONDIOLI & PAVESI // GRAINSTOR
OR08
TECHNICIAL SPECIFICATIONS