STEEL GANG BEAMS 150 X 100 X 8mm DISCS ø (inches)
SPACING (inches)
NUMBER OF DISCS
NUMBER OF BEARINGS
WORKING WIDTH (metres)
WEIGHT (kg) 610 X 6
WEIGHT (kg) 660 X 6
24 26 26 26 26 26
9 9 9 9 9 9
22 24 26 28 32 36
6 6 6 8 8 8
2.45 2.65 2.90 3.10 3.55 4.00
2395 2465 2535 2675 2810 2955
2420 2505 2585 2740 2900 3060
CLH 66/26
26 26 26 26 26
10 10 10 10 10
22 24 26 28 32
6 8 8 8 8
2.70 2.95 3.20 3.50 4.00
-
2490 2660 2745 2830 3005
CLH 66/28
26 26 26 26 26
11 11 11 11 11
20 22 24 26 28
8 8 8 8 8
2.75 3.05 3.30 3.60 3.90
-
2510 2600 2690 2780 2870
CLH CLH 61/23 CLH 66/23
STEEL GANG BEAMS 200 X 120 X 8mm DISC ø (inches)
SPACING (inches)
NUMBER OF DISCS
NUMBER OF BEARINGS
WORKING WIDTH (metres)
WEIGHT (kg) 610 X 6
WEIGHT (kg) 660 X 6
22 24 26 26 26 26
9 9 9 9 9 9
22 24 26 28 32 36
6 6 6 8 8 8
2.45 2.65 2.90 3.10 3.55 4.00
2455 2610 2680 2755 2900 3055
2515 2675 2755 2835 2995 3155
CVH 66/26
26 26 26 26 26
10 10 10 10 10
22 24 26 28 32
6 8 8 8 8
2.70 2.95 3.20 3.50 4.00
-
2590 2755 2840 2930 3100
CVH 66/28
26 26 26 26 26
11 11 11 11 11
20 22 24 26 28
8 8 8 8 8
2.75 3.05 3.30 3.60 3.90
-
2610 2670 2790 2875 2965
CVH CVH 61/23 CVH 66/23
RZ SERIES
MODEL
CLH-CVH FOR YOUR NEAREST FA R M G A R D D E A L E R P L E A S E C O N TA C T
NDC : 21 Andrew Baxter Drive Mangere Manukau 2022 PO Box 13-354 Auckland 1643 NZ T. 09 275 5555 // F. 09 256 2220 SDC : 8 Redcastle Road Oamaru 9400 NZ T. 03 437 9000 // F. 03 437 9100
BERTI // CELLI // STANHAY // FARMGARD RZ RANGE // FIONA // REMAC // PERUZZO BONDIOLI & PAVESI // GRAINSTOR
RA04
sales@farmgard.co.nz
TRAILED HEAVY DUTY OFFSET DISCS
TRUSTED AND PROVEN BRANDS :
FARMGARD RZ SERIES OFFSET DISCS - CLH-CVH The CLH and CVH model have been designed for farmers and contractors with higher horsepower tractors.
SPECIFICATIONS
Fully trailed with a double acting lift ram, and cursor for depth control. Blade weights up to 140kg per disc, make the CLH and CVH ideal for breaking in virgin country, while also suited to crop residue incorporation and seed bed preparation.
OPTIONS Hydraulic adjustment of the disc gangs working angle
Rear roller and harrow options available to enhance the finishing ability of the CLH and CVH trailed discs.
FORE AND AFT WEIGHT DISTRIBUTION CONTROL COMPLETE WITH SHOCK ABSORBER
HEAVY DUTY GANG BEAMS 150 x 100 x 8MM ON CLH MODELS 200 x 120 x 8MM ON CVH MODELS
1
DRAWBAR Height adjustment of the traction points (3 positions). Parallel lift bar with load transfer on hitch ring. Levelling adjustment with spring shock absorber.
2
3
1.
A ram provides the synchronized adjustment of the 2 disc gangs working angle.
2.
The graduated visual indicator shows the angle of the 2 disc gangs.
3. PIVOT A large dimension stirrup pivot allows the movement for the gang beam. The pin, blocked by a stop is made of pretreated molybdenum chrome steel.
ROBUST 150 x 100 x 8mm CHASSIS
n Bearing protectors
n Wheels with 14 ply tyres, 11.5/80 x 15.3 10 ply tyres n Hydraulic brakes
TRIPLED SEALED BEARING HOUSINGS
n Swivel hitch n Hydraulic drawbar offset n Disc gangs clamping device
DISC GANG ANGLE The working angle adjustment is achieved by a manual locking bolt situated outside the frame for an easy and safe accessibility.
BEARING/SHAFTS Bearings with double tapered rollers, triple seal and steel sheath. 40 mm square shaft in silicon-manganese steel. The fine thread, at each end of the shafts, allows a precise and efficient tightness of the disc gangs.
WHEELS
REAR ROLLER OPTION
n Discs Ă˜ 660 x 6mm lobed, 660 x 7mm, 660 x 8mm, 710 x 7mm, 710 x 8 mm
n Extra-bearings
DOUBLE TAPER ROLLER BEARINGS HIGH RESISTANT SILICON MANGANESE STEEL AXLES
An adjutable arm, allows an easy modification of the rear working angle related to the front one.
REAR COMB HARROW OPTION
The 2 wheels are supplied with inner tube fitted on reinforced rims with valve protection. 10.0/75 X 15.3 10 ply tyres
n Rear articulated and height adjustable hitch n Cover up disc n Deflector disc n Hydraulic levelling adjustment n Road lights n Hectar meter