DISC ø (inches)
SPACING (inches)
NUMBER OF DISCS
NUMBER OF BEARINGS
WORKING WIDTH (metres)
WEIGHT (kg)
SLO 61/23
24 24 24 24 24
9 9 9 9 9
18 20 22 24 26
4 4 4 6 6
2.00 2.20 2.45 2.65 2.90
1435 1515 1580 1695 1760
SLO 66/23
26 26 26 26 26
9 9 9 9 9
18 20 22 24 26
4 4 4 6 6
2.00 2.20 2.45 2.65 2.90
1535 1625 1700 1825 1900
SLO 61/26
24 24 24 24
10 10 10 10 10
18 20 22 24
4 4 6 6
2.25 2.50 2.75 3.00
1455 1520 1635 1700
SLO 66/26
26 26 26 26
10 10 10 10
18 20 22 24
4 4 6 6
2.25 2.50 2.75 3.00
1565 1640 1765 1840
SOLEO
RZ SERIES MODEL
SOLEO FOR YOUR NEAREST FA R M G A R D D E A L E R P L E A S E C O N TA C T
NDC : 21 Andrew Baxter Drive Mangere Manukau 2022 PO Box 13-354 Auckland 1643 NZ T. 09 275 5555 // F. 09 256 2220 SDC : 8 Redcastle Road Oamaru 9400 NZ T. 03 437 9000 // F. 03 437 9100
RA20
sales@farmgard.co.nz
SEMI-TRAILED OFFSET DISCS
TRUSTED AND PROVEN BRANDS : BERTI // CELLI // STANHAY // FARMGARD RZ RANGE // FIONA // REMAC // PERUZZO BONDIOLI & PAVESI // GRAINSTOR
FARMGARD RZ SERIES OFFSET DISCS - SOLEO The Soleo model is the entry level model of offset discs with a semi-trailed design. (Hitching off the two lower link arms of your tractor).
SPECIFICATIONS
The Soleo Discs are designed for smaller farmers for working in crop residues and seedbed preparation, available from 1.75m – 3.0m working widths. Blade weights from 65 - 85kg per disc and ideal for tractors 70 – 120 HP.
1.
Bearings with triple sealed double tapered rollers and steel sheath. Reinforced bearings supports. Optional bearing protectors. Square 40mm section disc shaft in high resistance manganese silicon steel.
The Soleo Discs have a unique feature where they use only one hydraulic ram to alter the gang angle, and when it is fully closed it lowers the rear wheels for transport making them a very unique and user friendly disc. The short chassis length makes the Soleo ideal for undulating contours. The fore and aft weight / levelling control is altered by lifting or lowering the lower link arms.
DRAWBAR
TRANSPORT
The drawbar is adjustable by 4 bolts. This gives the discs great work adaptability at whatever angle the disc gangs are set.
Automatic transport position through an adjustable and articulated command bar. Large and reinforced transport carriage for a good road stability. 2 Wheels with 10.0/80 x 12 8 ply tyres.
1 HYDRAULIC RAM TO ALTER GANG ANGLE AND ALSO TO LOWER THE REAR WHEELS FOR TRANSPORT
10.0/80 X 12.0 8 PLY TYRES
2.
Drawbar with adjustable offset and swivel traction bar.
3.
A reinforced telescopic arm allows the discs to obtain a strong rigidity during transport or work.
4.
HEAVY DUTY GANG BEAMS 150MM x 100MM x 8MM
All the articulations are equipped with grease nipples to ensure adequate lubrication for a long life durability.
5.
Heavy duty offset discs - 65 to 85kg per disc, for the ultimate penetration.
PIVOTS
DOUBLE TAPER ROLLER BEARINGS
Reinforced and well-proportioned greasable pivots. Opening of the disc gangs by a double-acting cylinder with anti-return valve. Disc gang beam section 150 x 100 x 8mm.
DRAWBAR PIVOT POINTS - IDEAL FOR HILL COUNTRY
HIGH RESISTANT SILICON MANGANESE STEEL AXLES
DISC BLADES
6.
Adjustable scrapers, with steel treated arms. Discs in very high resistance boron steel (160 kg/mm2) with a strong concavity for a good mixing and straw incorporation.
OPTIONAL EQUIPMENT
High clearance in transport position.
n Discs 450mm Ø cover up disc for 610mm
Ø discs. 510mm Ø cover up disc for 660mm Ø discs.
SEMI-TRAILED FORE AND AFT WEIGHT DISTRIBUTION
n Bearing protectors n Extra-bearings spacing 230, 260 and
280mm n Wheels with 10.0/75 x 15 10 ply tyres n Hectare meter
TRACTION BAR The traction bar ensures good distribution of loading pressures. Drawbar lock for transport safety and for hitching to tractor.
TRANSPORT POSITION
WORKING POSITION