Farming
MONTHLY National Inside this issue...
Building a better future We preview the upcoming Agricultural Buildings Show 2012
Farm Energy
This month we focus on AD
New Ranger We review the latest pick-up from Ford
March 2012
USED
TRACTORS John Deere 6320 P/quad, front Linkage, 2004, 4320 hours. John Deere 6420s TLS P/quad, 2005, 3097 hours, JD loader brackets. Massey 365 2wd c/w MF loader/fork, 8 spd. 3618 hours, genuine tractor. Massey 372 4wd. 3950 hours, one owner, 12x12 Shuttle, turf tyres. Massey 50E Power Shuttle 4wd. Loader, 952 hours, ex British Gas, jaw bucket. Massey 50E Power Shuttle 4wd. Loader, 1371 hours, ex Scottish Water, bucket. Massey 7840 Dyna VT F/Linkage, 50kph. Trailer air brakes, 2007. County 764 c/w Hiab Crane, Duncan cab, 815 hours, unique. New Holland TD5050 ( 95hp ) 2009, 1134 hours, 12x12 40kph gearbox. New Holland TN75s SuperSteer, 40kph. PowerShuttle, Turf Tyres, air cond.cab. New Holland TL80 c/w Trima loader, 12x12 Shuttle, just 625 hours. New Holland TL80 Two Wheel Drive, 2002, 12x12 Shuttle, 5190 hours. New Holland TL90 4wd. 2003, low roof, Air cond.cab, P/Shift & P/Shuttle. New Holland TD90 Chillton loader, Air cond.cab, genuine 228 hours, New Holland TM175 Suspension, 2003, f/linkage + pto. 40kph + Creep. New Holland TSA115 4wd. 24x24 g/box, 2006, 3254 hours, Air cond.cab. Claas Ares 826 Suspension, 2006, 2347 hrs. Front Linkage/weight, 4 valves. Deutz Agrotron M620 Suspension 50kph. Trailer air brakes, 2010, 1150 hours, PowerShift + PowerShuttle. Kubota ME9000 4wd. Only 193 hours, PowerShuttle, Air cond.cab, weights, One owner, Turf tyres. McCormick CX95 Chillton loader, 2006, Approx.. 3500 hours. McCormick MC100 4wd. 2001, 4345 hrs. 16x16 gearbox, air cond.cab, one owner. Renault Cergos 4wd. 2002, only 2475 hrs. LH Shuttle, one owner, 97hp. Renault Ceres 436 Chillton loader, 2003, Shuttle gearbox, one owner. Renault Ceres 436 Chillton loader, 2003, Shuttle gearbox, one owner, 4668 hrs. Steyr 9094 4wd. 16x16 g/box, 16.9 x 38, 3563 hours, passenger seat. Steyr 970 Quicke loader, 2615 hours, 3rd service, 70hp. Valtra T152 Versu 50kph. Trailer air brakes, 870 hours, creep gears, 150hp. Valtra T151 Hi-Tech 50kph. Trailer air brakes, 1073 hours, creep gears, 167hp.
TRACTORS & EQUIPMENT
Valtra N121 Hi-Spec, 2009, 1621 hours, F/linkage + PTO. Air cond.cab, weights, 50kph. 600/65 x 38 tyres. Same 80 Special Trima loader, 4wd 80hp. 3328 hours, 3rd service. Zetor 7211 2wd. 4150 hours, 540/1000 16.9 x 34 tyres, very clean. CaseIH 895XL Duo 4wd. Only 4856 hrs. Superb condition, one owner. CaseIH JXU 75 4wd. 1154 hrs. P/Shift + P/Shuttle, weights. CaseIH JXU 105 4wd. 3373 hrs. P/Shift + P/Shuttle, Air Cond. CaseIH Maxxum 5130 P/Shift, 7341 hours, very clean example. CaseIH CVX 1155 Suspension 50kph. 2004, 3300 hrs. weights. CaseIH CVX 150 Suspension 50kph. 2007, 3518 hrs. 460/85 x 46. Weights, 4 valves, passenger seat. CaseIH CVX 150 Suspension 50kph. 2009, 2900 hrs. 650/65 x38. Front Linkage, 4 valves. CaseIH CVX 160 Suspension 50kph. 2009, 2796 hrs. 650/65 x38. weights, 5 valves. CaseIH CVX 1170 Suspension 50kph. 2004, 6024 hrs. 650/65 x38. weights, 5 valves. CaseIH CVX 1170 Suspension 50kph. 2004, 5276 hrs. 650/65 x 42. F/linkage, 4 valves. CaseIH CVX 175 Suspension 50kph. 2009, 2578 hrs. 580/70 x 42. weights, 4 valves. CaseIH CVX 195 Suspension 50kph. 2009, 3351 hrs. 710/70 x 38. weights, 4 valves. CaseIH CS78 Quicke 640 loader, 2002, 7100 hrs. 16.9 x 34 tyres, one owner. CaseIH CS110 Special, 5467 hrs. weights, 18.4 x 38 tyres, 110hp. one owner. CaseIH MXM155 F/Linkage + PTO, 2005, 2265 hrs. 40kph. Air cond. 600 tyres. CaseIH MXM190 Suspension, 2003, 5212 hrs. 50kph. 650/65 x 42 tyres. CaseIH MXM190 Suspension, 2003, 3377 hrs. 50kph. + Creep. CaseIH Magnum 225 Suspension 50kph. 2007, 2361 hrs. weights, 710/70 x 42, Passenger seat, mudguards. CaseIH Magnum 255 Suspension, 2006, 2717 hrs. weights, 710/70 x 38, 40kph + Creep. CaseIH Magnum 280 Suspension 50kph. 2008, 609 hrs. weights, 650/85 x 38, Auto Steer ready, Trailer air brakes. CaseIH Magnum 310 Suspension 40kph.
2007, 2607 hrs. weights, 710/70 x 42, Creep gears. CaseIH Magnum 335 Suspension 50kph. 2009, only 268 hrs. weights, 800/70 x 38, Trailer air brakes, Accuguide ready. CaseIH Magnum 340 Suspension 50kph. 2011, 436 hrs. weights, 710/70 x 42, Trailer air brakes, Full Accuguide. CaseIH STX Quadtrac 480, 2006, 5000 hrs. rear linkage + pto. 30” tracks. CaseIH STX Quadtrac 500, 2005, 5300 hrs. Rear linkage + pto. DIGGERS / EXCAVATORS JCB 2cx StreetMaster 4x4, very low hrs. Front jaw bucket, piped, rear buckets, Softride, immaculate. JCB 4cx Sitemaster Turbo PowerShift, 4 in 1 bucket, tidy condition. JCB 8045 ZTS, 2007, 1590 hrs. Cab guards, Breaker pipes, back fill blade, quick hitch. Hitachi ZX Zaxis 210 LC-3, 2010, 938 hrs. Reversing camera, breaker pipes, Quick hitch. Yanmar B25v 2.8 ton, 2006, 1214 hrs. Breaker pipes, rubber tracks, back fill blade. Volvo EC140 excavator, 2003, hyd.quick hitch, Breaker pipes, cab guards, good tracks. Volvo EC15 Canopy machine, year 2000, 2817 hrs. piped, back fill blade. DUMPERS Thwaites 6 ton dumper, 1998, 3400 hrs. Thwaites 6 ton Swivel tip dumper, 1998. Benford 1.5 ton Dumper, low hours. Ausa Swivel tip 6 ton dumper, 2008, 428 hrs. Neuson Swivel tip tracked dumper, 2008, 64 hrs TELESCOPIC HANDLERS / FORKLIFTS Caterpillar Th407 PowerShift 40kph. 2010, 1488 hours, trailer hitch, pallet forks. Manitou Buggiescopic 420, 4214 hrs. JCB 520-40, 2005, 770 hours, pallet forks. JCB 520-40, 2006, 1186 hours, pallet forks. JCB 520-40, 2007, 1043 hours, pallet forks. JCB 526s SmoothRide, 2005, Air cond. JCB 528-70 Quickfit carriage, 2156 hrs. JCB 310s, 2008, 2300 hours. Merlo P25.9 pallet forks & bucket, Side shift, levelling, 9 metre reach. Manitou M26-4 masted forklift, 3022 hrs.
EQUIPMENT Simba Horsch CO6, 2003, hyd.fold. McConnel 7 leg Shakerator/Flexicoil. McConnel 7 leg Discaerator / demo. Vaderstad Carrier CR300, 2004. Simba 23c discs, hyd.front adjust. Simba 3 metre Solo, 2002. HEDGECUTTERS McConnel PA35 Switchbox, 1.2m head. McConnel PA55 Forward reach, 2009. McConnel PA6000, 1.5m head. 2001. McConnel PA55 XTC, 1.2m head. McConnel PA65T EDS, V4. 1.5m head. Hydraulic roller, Linkage mounted. McConnel PA6570T EDS, Revolution controls, V4. 1.5m head, Hyd. roller, Linkage mtd. TRAILERS AS Marston 14 ton Grain chute, hyd.door. AS Marston 14 ton Grain chute, hyd.door. Air brakes, Super singles, 2011. AS Marston 8 ton grain. AS Marston 14 ton grain / cover. Salop AP160 9 ton dropside. Weeks 3 ton dropside. Weeks Plus 40 double dropside. MF 22 double dropside. Henton 10 ton Sileage. COMBINES Axial Flow 2166, 16’ header,1796 hrs. air cond.cab. Axial Flow 2388, 22’ header,1395 hrs. AFS screen, yield mapping. Axial Flow 5088, 2011, 20’ Vario, Only 35 hours, Case warranty, Case finance package subject to conditions. Axial Flow 7088, 24’ Vario, 2011,Only 124 hours, Case warranty, Case finance package subject to conditions. John Deere 1177, 16’ header & trolly, Chopper, spreaders, very clean. John Deere 9780 CTS Hillmaster, 22’ header, Chopper & spreaders, 1555 hrs. New Holland CT56, 13’ header, Air cond. Self levelling, 2050 hrs.
Contents
10
65
March 2012
66 33
Features
Regulars
12 16 17 24 27 41 42 44
06 22 34 46 61 66
Muck & Soil Northwest 2012 looks like being bigger and better than ever.
Animal Care Got a problem with lice?
Grain Managing grain drying.
Sheep & Lambing The latest advice from the NSA.
Buildings The Agricultural Buildings Show is close.
Pigs Precision pig farming trial.
Fuels AdBlue information and storage solutions.
News All the latest need to know commentary.
On Topic Schmallenberg virus.
Energy Focus on AD.
Forestry Topical news from the sector.
ATV Go anywhere workhorse news.
Motors New Ford Ranger reviewed.
NEXT MONTH Pig & Poultry 2012 preview.
Fencing Time to look at your boundries? We welcome feedback and encourage readers to air their views. Have an opinion on a story or agriculture in general? Write to us at the address below or email letters@farmingmonthly.com
Andrew Poulton EDITOR
Whilst every attempt is made to ensure accuracy, the opinions expressed in the magazine are not necessarily those of the Editor. The Editor also reserves the right to alter or edit material as necessary and no responsibility is accepted for inaccuracies. Full copyright applies. All rights reserved 2012.
Connect with us:
Published in the UK by Farming Monthly Ltd, 15-17 Dugdale Street, Nuneaton, Warwickshire CV11 5QJ Tel: +44 (0) 2476 353537 Fax: +44 (0) 2476 353571 Editor Andrew Poulton Editorial Assistant editorial@farmingmonthly.com Advertising Director Shona Beedham s.beedham@farmingmonthly.com Senior Advertising Sales Jenny Tranter j.tranter@farmingmonthly.com Advertising Sales Edward Hickinbottom e.hickenbottom@farmingmonthly.com Accounts Manager Cheryl Arnold c.arnold@farmingmonthly.com Production Team Steve Wilson Andrew Poulton studio@farmingmonthly.com For editorial and general enquiries or to advertise please call Tel: 02476 353537 or email sales@farmingmonthly.com
www.farmingmonthly.co.uk 04 www.farmingmonthly.co.uk | Farming Monthly | January March 2012 2012
November 2011 | Farming Monthly | 03 November 2011www.farmingmonthly.co.uk | Farming Monthly | 03
Competition Subscribe Win a Snugg iPad 2 Squared Skinny Fit Protective Case Cover T he Snugg iPad 2 Squared Skinny Fit protective case is a rugged alternative to our Snugg leather cases with all the great design features of the standard Snugg case. The Snugg iPad 2 Squared Skinny Fit protective case is ideal for people who take their iPad 2 out of the office and on the road. This case has an RRP of £25.99 What is TheSnugg.com? TheSnugg.com is here to help bring quality products to market, whether it is our own Snugg products or others. When Snugg started, one of the first things that was said was ‘we don’t do cheap, we do quality’ and that remains the same now. All of the products we stock on the site we believe to be great products, in function and quality, and the only reason they get on the site is because we actually like them ourselves. The Snugg brand was born early in 2010 with our very first iPad case. One of the directors got an iPad and just couldn’t find a case that he was really happy with... and we all knew people who were saying the same thing. After a discussion (and a few drinks) we decided we should produce a quality iPad case that people would love... and that's exactly what we did! We initially started selling on Amazon once we had the cases made and they were a hit straight away. The company saw rapid initial growth because of this and that’s how Snugg was born. We set up TheSnugg.com in early 2011 - and we now stock a wide range of all kinds of different Snugg products and other people’s and are expanding all the time. Visit www.thesnugg.com
Great reasons to subscribe... Just £18 for • Free delivery direct to your door • Never miss an issue
Keep up-to-date with the latest news in the farming industry by subscribing to Farming Monthly National - the UK’s leading directly distributed, national agricultural publication. Paying by cheque: Please complete your name and address details below and make your cheque payable to Farming Monthly Ltd. Paying by debit or credit card: Please return the completed form below to: Farming Monthly Subscriptions, 15-17 Dugdale Street, Nuneaton, Warwickshire CV11 5QJ
To enter, send the entry form below to Competitions, Farming Monthly National, 15-17 Dugdale Street, Nuneaton, Warwickshire CV11 5QJ - Good Luck!! Q: The Snugg have 3 offices worldwide - in which countries are they based? Hint: visit the website contact page
12 issues
Yes please I’d like to subscribe
Name: ................................................................................................... Address: ............................................................................................... .....................................................................Postcode: ........................ Telephone: ............................................................................................
Answer: ............................................................................ Name: ................................................................................................... Address: ............................................................................................... .....................................................................Postcode: ........................ Telephone: ............................................................................................ Email: ................................................................................................... Farm Type: ............................................................ Acreage: ................................................................
www.farmingmonthly.co.uk
Email: ................................................................................................... Farm Type: ..................................... Acreage:....................................... Visa/Delta Card No. CVV No.
Signature
MasterCard
(Valid From)
Switch
Issue No. _______
Expiry Date
Date
By including your email address, you indicate your consent for us to email you information about selected products, events and services from Farming Monthly Ltd, our affiliated companies and from carefully chosen third parties. To opt out tick here. I do not wish you receive emails from: Farming Monthly Ltd Affiliate Companies Third parties
January March 2012 | Farming Monthly | 05
| News
The South of England Show 2012 Book early for discounted tickets to one of the best shows on the calendar! or 45 years the South of England Agricultural Society has been celebrating the rural way of life. The South of England Show is the Society’s flagship event and a national institution – rejoicing in our countryside heritage while embracing the demands of the 21st century. This year looks set to be a another record breaker, throwing
F
the spotlight on the best in British agriculture, equestrianism, horticulture, food and drink, country crafts, sports and entertainment. Gardening devotees will find inspiration in the floral marquee with stunning displays depicting all aspects of horticulture, from flowers to floral art and complete gardens. Children will be in their element
with a vast array of activities and the opportunity to see a menagerie of animals at close quarters. Entertainment comes in a variety of guises and the broad appeal of the Show hinges on a wide range of attractions outside the central agricultural theme – including one of the best outdoor shopping malls in the South East. Taking place on 7th, 8th & 9th of June 2012, the South of England
Show is a wonderful countryside experience not to be missed. Show opens: 9.00am – 6:30pm daily. Advance tickets attract a discount – so book now! For show information and details of local ticket agents visit the website: www.southofenglandshow.org.uk
Harold R Johns ‘Open Day’ A great day out and an opportunity to see the range of equipment and services HRJ have to offer. ast year at Harold R Johns, we held a successful ‘Open day’ at our premises in Catbrook. The time has come now for this years ‘Open Day’ to be held on Friday 13th April. The ‘Open Day’ will consist of Claas tractor line up, many machines from our many suppliers on display along with a hog roast, refreshments and a prize draw. Harold R Johns Ltd is a main agricultural machinery and farm
L
supplies dealer for the Monmouthshire area. We are main Claas Tractor and Machinery dealers stocking various models of tractors and green harvest machinery, along with a comprehensive range of second hand tractors and machinery all in stock to be viewed. Currently dealers in Lely/Welger, Browns, Protech, Teagle, McHale, Twose, Marshall, IAE, Offa, West, Chillton, Richie, Walter Watson, Foster, Quantock, McConnel,
06 | Farming Monthly | March 2012
Landmec Pottinger, Alo, Hackett, Bateson and CLH Trailers - all items are stocked and available to view. We are also a main dealer for Arctic Cat Quad bikes and accessories and offer a service department for them by fully trained staff. A comprehensive selection of tyres is also available. We stock a large range of fencing supplies including Stakes, Rails, Posts, Wire, Metal and Wooden gates all on display to
take away or have delivered. Also our modern stores have a large amount of stock and accessories ranging from children’s toys to precision tools. We hope the open day will be as successful as last year with many customers attending; it is a unique opportunity to see the tractors and machinery on offer, speak to experienced staff with any questions you may have, it is an opportunity not to be missed.
www.farmingmonthly.co.uk
| News
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 07
| News
Gloucestershire sheep farmers shown how BWMB sells their wool Visit to headquarters sheds light on grading, trading and promoting wool through BWMB. group from Gloucestershire this week got to see exactly what happens to their wool once it leaves their farms thanks to a visit to the headquarters of the British Wool Marketing Board (BWMB) at Bradford. The group, all sheep farmers operating in Gloucestershire, were shown every aspect of the BWMB’s work in grading, trading and promoting wool and also visited a scouring plant to see the first step in the wool supply chain after it has been sold at a BWMB auction.
A
“Without a doubt we’ve all learnt something from the day and managed to gain a much greater understanding of why our wool is graded as it is.”
First stop in the process for the farmers was to see the BWMB electronic auction in progress at the BWMB’s headquarters, Wool House. Next stop, at the depot, the farmers were very impressed with the level of detail involved in grading wool and the speed BWMB graders are able to operate at, explained BWMB product development manager Tim Booth . “Farmers are often surprised at the level of skill involved in grading fleeces and it always helps give them a real insight into the process and also the importance of presenting fleeces in the correct manner for grading. “The graders operate at a quite amazing speed and an incredible level of accuracy which many farmers simply don’t appreciate until they see it first-hand. “However, grading fleeces according to quality is an integral part of BWMB’s role as it means we can ensure wool is sold to the producer’s best advantage,” said Mr Booth.
08 | Farming Monthly | March 2012
“What was clear from the visit was that the farmers simply didn’t comprehend the scale that BWMB operates at. They were also impressed by the passion that everyone in the industry has for the product they’re dealing with and making the best of British wool.” The visitors also saw a wool scouring plant in action at Howarth Scouring, Bradford, and were talked through the promotion and marketing activity of BWMB, explained Mr Booth. “With wool prices at a 25 year high, and continuing to climb, some may believe we can ease off with marketing. But this would be a false economy and with the good work being done by the Campaign for Wool there are a lot of opportunities to be had.” Speaking on behalf of the group BWMB Regional Committee Member Simon Harrison said it had given the group a much better understanding of the work of BWMB and of the work done further down the chain to process
wool in to a usable product. “Without a doubt we’ve all learnt something from the day and managed to gain a much greater understanding of why our wool is graded as it is. We also appreciate the best way to sell the wool is through the auction system as this will always maintain and get the best possible price for us. “The last five sales had seen lower clearances, but BWMB had held firm and the result was a much better clearance and better prices at the sale we saw in action this week. This is to the benefit of all sheep farmers and BWMB is to be commended for this.” As ever with these visits, while the farmers undoubtedly got a lot out of it, the BWMB staff also found it a useful way of getting feedback from producers, said Mr Booth. “We welcome any opportunity to speak to wool producers as it helps them understand our work better and also gives us the opportunity to understand their issues better.”
www.farmingmonthly.co.uk
| News
POLICE APPEAL...
Dickies quality Farm and Ranch range
Subheader
fficers investigating the murders of the Reverend John Suddards and Betty Yates are appealing for the public’s help in locating a rucksack and a mobile phone. Police believe the missing rucksack and phone could be vital to their investigations and may be on farmland or in an outbuilding or barn in the South East, potentially in the Eastbourne area. Officers are appealing to farmers to check their property for these items which may have been discarded some time between Tuesday 14th February and Saturday 18th February 2012. The ‘Eurohike Hydro’ rucksack is olive green and black and has a distinctive orange belt clip on the side straps which doubles as a whistle. If anyone finds this bag they are asked not to touch it but to contact the police immediately as it may need to be preserved for forensic evidence. Police are also looking for a missing purple Blackberry 9300. If anyone knows the whereabouts of this phone or has been offered
O
one for sale since Tuesday 14th February 2012 they are asked to contact the police. Reverend Suddards was found dead in his home in Thornbury on Tuesday 14th February 2012. Betty Yates was found dead in her home in Bewdley, Worcestershire on Wednesday January 4th, 2012. Stephen Farrow, aged 47, has been charged with murder and remains in custody at this time You can contact your local police force by dialling 101 or please call Crimestoppers on 0800 555 111.
The ‘farmers slippers’. ickies – the internationally renowned workwear brand have put together a specially selected package called the ‘Farm and Ranch’ which includes more of the most practical and best selling outdoor clothing and work boots. The traditional, tough and practical ‘Reaper’ trousers, designed especially for use in the countryside, are available in three different specification choices; all made from 65% Polyester and 35% cotton, 260gsm. There’s the comprehensive Redhawk Workwear Range, and the weatherproof Westfield Wax Jacket, Trousers and Leggings also provide effective protection from some of nature’s more aggressive flora such as brambles, thorns, thistles and nettles. Maurice Morton, sales & marketing director at Dickies added: “Landmaster Wellingtons are one of the lightest and most comfortable Wellington boots on the market. Polyurethane is extremely light (40% less than PVC or rubber), the boots are
D
especially suited for Farmers who need to wear Wellingtons all day, whether its driving around the farm or off to market, feeding the sheep or walking cattle from the fields to the parlour. “Conforming to standard BS EN ISO 20347:2004, this revised version of our previous best selling Wellington has improved resistance to oil, fats and manure, greater slip resistance and a new sole profile; moisture absorbing insoles have also been introduced which together with the lightness in weight, leave feet feeling fresh even after a long days work, dubbing them ‘The Farmer’s Slippers’.”
THE SCAREY MAN MKIII MODEL
®
PATENTED Let us protect your crops, giving you both movement and noise if required negligible running costs
CLARRATTS LTD
HOLLOW FARM, TOSELAND, HUNTINGDON, CAMBS PE19 6RU FAX: 01480 476464 http://www.clarratts.com e-mail: enquire@clarratts.com
TELEPHONE: 01480 476376
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 09
| News
Launch of the National Centre for Precision Farming ore than 140 guests, including MPs, engineering and farming experts, and research staff, attended the launch of the National Centre for Precision Farming (NCPF) at the House of Commons on February 29. The launch took place during a reception in the Terrace Pavilion, overlooking the Thames, hosted by Julian Sturdy MP, an alumnus of Harper Adams University College. Harper Adams is home to the NCPF, and will facilitate the knowledge exchange required to bring “smart” agricultural machinery into wider and more productive use in UK, and global, farming. Principal Dr David Llewellyn explained: “The agricultural engineering sector is moving quickly in areas of advanced manufacturing, mechatronics, hydraulics, data management, and in exploring novel techniques, but these efforts need co-ordination, routes to expertise in research and development and, dare I say it, a greater understanding amongst those who have to use increasingly smart machinery that might challenge accepted production methods. “That is where the National Centre for Precision Farming hopes to make a difference. By bringing together representatives of the
M
agricultural engineering sector, the farming community and academics from a variety of disciplines and institutions, including our own crop and livestock scientists, the centre will aim to stimulate debate, innovation and understanding as we all make the transition to smarter farming, building on existing knowledge and ensure that we have a means to collaborate on strategic issues. Dr Llewellyn added: “As Peter Kendall said at last week’s NFU Conference, ‘we want to get innovative solutions out to the field from the lab.’. We don’t want it to be a talking shop, but rather a place where agricultural engineers and famers can be brought together to actively develop expertise in the use of advanced technologies.” Mr Sturdy, MP for York Outer, opened his speech by saying that there are three big issues facing the UK, and rest of the world, over the next few decades: food security, water security and energy security, and that they were interlinked. “If we are going to tackle these issues we really have to innovate. Innovation is the key that’s why I am delighted about today’s event, which is all about innovation, and I am glad to be a part of that. The UK is built on the back of innovation and we have to become the world
leaders in this. I think that what Harper Adams is starting here today gives us that great opportunity.” Professor Simon Blackmore, Harper Adams University College’s Professor of Agricultural Engineering, who will head the new Centre, described precision farming as “a management technique, not necessarily a technology, which recognises variability as an integral part of the production process and aims to do the right things, at the right time, in the right way”. He said: “Precision farming meets many different goals. It moves us toward more sustainable farming, with smaller inputs, less waste and more income. It is good for the environment, good for economics and good for society. Within the National Centre for Precision Farming, we have precision agriculture and precision livestock farming. Whatever happens in the future we need to find new systems that lead to better efficiency. Efficiency never goes out of fashion. We may well have different drivers, economic environments, or political agendas, but efficiency remains key. “It is good to see so many people here today and to meet old friends, who have been working together in precision farming for 20 years. I don’t have all the answers,
but I think, collectively, we do. And by coming together we can share these experiences and come up with the answers we need. “So, by establishing the National Centre for Precision Farming at Harper Adams University College, we have the opportunity to come together, and to promote new, appropriate technologies and techniques to help farmers meet today’s goals.” Professor Blackmore outlined some of the forthcoming NCPF activities. As a new professor, he will give his inaugural lecture in April, on the subject of Agricultural Robotics. There will be a stakeholder meeting in May, and a technical day for auto steer and auto guide technologies in July. Longer term, Harper Adams is developing a Masters course in precision farming. Closing the proceedings, Baroness Byford said: “This is a very special occasion. I think that you, together, are giving us a winwin situation and I am delighted that Harper Adams is the lead and home for this venture because you have such a strong engineering base. For me, it is absolutely critical that that department not only survives but continues to grow, because that’s where we need to go in the future, as David said, towards smarter production of food.”
Next Auctions on Monday 12th March 2012 & 16th April 2012 commencing at 10.30am
10 | Farming Monthly | March 2012
www.farmingmonthly.co.uk
| News
Firestone launches Performer 65 tractor radial tyre Available in 13 sizes from May 2012. irestone has expanded its family of Performer radial tyres with the launch of the Performer 65 for medium-sized tractors. The announcement was made at the 37th International Fair of Agricultural Machinery which took place in Zaragoza, Spain, from the 14th to 18th February 2012, where Firestone was exhibiting its range of innovative agricultural tyres. The Performer 65 offers farmers the combination of a higher speed rating, increased ride comfort, an improved load carrying capability and even lower soil compaction than the existing R9000 Evolution tyre it is replacing, without compromising the outstanding high-level traction, self cleaning and cut resistance which made its predecessor so popular. The 65 series is one of the fastest growing segments in the agricultural radial tyre market with demand growing steadily in recent years. The Performer 65 is the latest addition to the Performer range joining the Performer 85 and
F
the Performer 70 launched in 2009 and 2010 respectively. “Market research and customer feedback tell us that ride comfort and reducing soil compaction are increasingly important for farmers today working with larger and faster tractors, heavy loads and a more intensive use of machinery. The Performer 65 has been developed to meet these needs” says Barry Coleman, Firestone’s UK product manager. “Our market share in this segment has grown dramatically over the past few years, and Firestone is already one of, if not the single largest brand in the UK.” The new Performer 65 has been designed at Firestone’s European research centre in Italy and is manufactured at the company’s specialist agricultural plant in Puente San Miguel, Spain. The tyre features Firestone’s unique dual-angle lug technology, which produces a larger lug traction area and creates less soil disturbance than conventional designs. Combined with an increased
crown radius (‘flat tread’) and increased sidewall deflection which produces a bigger tyre footprint, the Performer 65 creates less soil compaction and more ride comfort than its predecessor. With the new Performer 65, Firestone aims to continue its commitment to the agricultural industry with a focus on increasing farming efficiency and reducing costs for the farmer. The tyre, which has been designed for the replacement and originalequipment markets, will be available in 13 sizes from May 2012 and will help Firestone strengthen its position in the very competitive and technologically demanding British agricultural tyre market.
LIMEX Contact our sales team:
Tel 0870 2402314 • Fax 0870 2402729
E-mail: limex@britishsugar.com www.limex.co.uk
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 11
| Muck and Soil
Muck and Soil Northwest 2012 Set to be BIGGER and better than ever.
ith new sponsorship, more exhibitors and demonstrations and free nutrient management clinics, the newly branded Muck & Soil Northwest 2012 is set to be bigger and better than ever this year. Now in its sixth year, the event will take place at Reaseheath College, Nantwich, Cheshire on Tuesday, March 20th with live machinery demonstration, one-toone clinics, trade stands and a wealth of information on soil, nutrient and manure management. Muck & Soil Northwest - a FREE event for farmers and contractors organised by HarveyHughes Limited - also has a major new
W
sponsor – GrowHow, the national fertiliser manufacturer based in the county. “We are delighted to welcome GrowHow on board,” said Chris Harvey of Harvey Hughes Limited. “As well as showing farmers how to make best use of their farm yard manure and slurry, this year’s event will help them make even more progress in cutting their carbon footprint by making sure they use Nitrogen fertilisers more efficiently,” he said. On arriving at Muck & Soil Northwest, visitors will be able to book a half-hour nutrient management clinic with a HarveyHughes consultant. The
12 | Farming Monthly | March 2012
clinics will focus on Cross Compliance obligations and NVZ Regulations as well as more general nutrient management issues. Farmers can bring their own NVZ records and pre booking a slot in the free confidential clinic will fast track them into the event. Also new for 2012 is the addition of soil improvement equipment with a dedicated 3.5hectare demonstration area. Further practical demonstrations will show to calibrate fertiliser spreaders for more even and accurate application of granular products. A huge range of muck and slurry handling machinery and
storage facility options can be seen in action throughout the day with live commentary to help farmers and contractors select the most effective kit to suit their needs and improve their slurry and muck utilisation. Commenting on the sponsorship, Elaine Jewkes, GrowHow grassland specialist said: “GrowHow offers a range of products and services which help to ensure that farmers can use nutrients most efficiently to produce quality forage and crops. This ranges from the straightforward approach offered in the Blueprints for Growth Grass booklet, with templates showing how to incorporate fertilisers and manures effectively, to the comprehensive nutrient management programme, EnCompass. This can really help take the strain out of nutrient management.” For more information, to exhibit at the event or to book your free slot in the nutrient management clinic, contact HarveyHughes Limited on 0161 927 7562 or email mnw@harveyhughes.com
www.farmingmonthly.co.uk
| Muck and Soil
T-T Enviro’s range of Separators Fledgeling division of the T-T company already proving a great success. vegetable waste, abattoirs and Bio-gas industry. These separators are available in two sizes with four screen options of 0.25mm up to 1mm for each size and have outputs of 4 – 56m³/hr dependant upon screen size and type of material to be separated. Each separator features an in-line planetary gearbox, cast iron body and treated stainless steel rotary double-helix screw inside an engineered wedge-wire screen filter.
-T Enviro, a relatively young division of T-T, is already proving a great success, with its wide range of separators, mixers and heavy duty chopper pumps for Agricultural and Industrial applications including Bio-gas applications. Our portfolio includes 2.2kW up to 18.5kW electric submersible, long shaft, vertical and horizontal drywell pumps. The range also
T
Submersible mixers are available from 0.75kW up to 18.5kW, with options on mounting arrangements, and are used for mixing and homogenizing processes. The range consists of both stainless steel and cast iron options, and feature stainless steel propellers with self-cleaning profile. T-T can offer further assistance with bespoke design, control panels and after sales support to suit specific requirements.
features the high performance PTO driven range of high head umbilical type transfer pumps, boasting a unique gearbox capable of different input shaft configurations, making it ideal for PTO or engine driven applications without the need to change the gearbox. T-T’s screw press separators are popular for solid/liquid separation, including cattle and pig slurry,
11R12B
Perfect distribution technology With dribble bar systems from the market leaders: • Application widths from 6 to 36 m – up to 24 m for self-propelled vehicles • Totally flexible: apply liquid manure or digestate to all types of crops • Save on man-made fertiliser costs through accurate liquid manure or digestate spreading • Well-engineered components and many more advantages ...
2IÀFHH
01270 216600 0 0RELOH RELOH 07817 98 986561 86561
www.farmingmonthly.co.uk
ENGINEERED TO WORK
www.vogelsang.co.uk w ww.vogelsan ng.co.uk
March 2012 | Farming Monthly | 13
| News
£60 million boost for rural businesses This scheme is part of Defra’s £100 million investment in the Rural Development Programme for England. usinesses in rural England are to benefit from a new £60 million grant scheme that will turn ambitious business plans into reality, Environment Secretary Caroline Spelman has announced. Grants, which could be worth more than £1 million each, will enable entrepreneurs in rural areas to take life-changing opportunities to grow their businesses through the Rural Economy Grant scheme, increasing both their competitiveness and profits. Successful applicants will receive up to 40% of the cost of projects in the five business areas of farm competiveness, agri-food, tourism, forestry, and micro enterprise support. Mrs Spelman said:
B
he CLA commented that it encouraged businesses in the countryside to apply for funding from Defra’s new £60million Rural Economy Grant scheme, which has been informed by CLA lobbying. CLA President Harry Cotterell
T
“Businesses in rural England can play a significant part in helping to rebuild the nation's finances. From today, they have the chance to turn their most ambitious and innovative business plans into a reality - boosting profits, supporting a thriving rural economy and improving the natural environment. “Our £60 million investment will give farmers and rural entrepreneurs life-changing opportunities to transform their business prospects for the long term. It’s part of a £165 million package of initiatives to unlock the economic potential of our rural areas, which have been overlooked for too long.” The Rural Economy Grant scheme will enable businesses to
said the scheme, which will kickstart rural economic growth, has five categories, focusing on farm competitiveness, agri-food, tourism, forestry and microenterprise, which were devised by the Association. He said: “We believe grants
14 | Farming Monthly | March 2012
maximise opportunities in the increasing global demand for food. For instance, grants may be available to help companies buy new processing and packing equipment, allowing them to target new markets. Farmers will be able to apply for grants to improve animal health and welfare and improve soil nutrients and water management. To help rural and farming businesses take up new opportunities in the growing tourism industry, they can also apply for funding for accommodation and visitor services and activities. Grant support is also available to improve the competitiveness, productivity and environmental efficiency of the forestry sector.
made in these five categories will help boost rural economic growth, profits and competitiveness. The rural economy has a vital role to play in helping to improve the health of the overall economy, so we encourage all rural businesses to
The Rural Economy Grant scheme will prioritise support for small businesses in Rural Growth Networks, a £15 million pilot project to help rural areas overcome barriers to growth, such as a lack of suitable premises, and poor provision of infrastructure such as superfast broadband and mobile networks. This scheme is part of Defra’s £100 million investment in the Rural Development Programme for England, which was announced in the Rural Economy Growth Review in November 2011. Defra has already allocated £20 million to the Farming and Forestry Improvement Scheme, and the £20 million Skills and Knowledge Transfer Network will be open for applications later this year.
make an application to this commendable scheme. “The Rural Economy Grant Scheme provides important funding for rural businesses, which must be allowed to thrive while also safeguarding the environment.”
www.farmingmonthly.co.uk
| News
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 15
| Animal Care
A problem with lice? An all year round problem solved in an effective yet environmentally friendly way. hese small wingless insects are present all year round and especially noticeable amongst housed animals and infestations spread more rapidly when animals are in close contact. The female lice attach their eggs (nits) to the hair fibres and take about ten days to hatch into nymphs and a further two to three weeks before they develop into adults. It is just possible to see adult lice with the naked eye. By carefully parting the hair, movement can normally be seen at the base of the hair. They are grey/brownish in colour and the size of a pinhead. Biting lice are by far the most common, they feed on debris on the surface of the skin and their scavenging produces intense irritation causing crusty scurfy areas that the animal will bite and scratch in an effort to alleviate their discomfort. Sucking Lice can cause severe anaemia and infested animals can rapidly lose weight and become prone to other illnesses. Lice can only survive for a few days off their host but it is very important to treat all bedding, housing at the same time that you treat your animals, to prevent reinfestation. Barrier Animal Healthcare’s
T
Livestock Louse Powder (HSE Licence No. 8712) is very effective, affordable and the most environmentally friendly product of its kind on the market for the animal and the user. This unique formulation of Livestock Louse Powder is entirely non-toxic and contains a safecarrier that does not cause carcinogenic effects. Totally safe and designed to be applied directly to all animals it is suitable for use in organic farming systems, as it falls into the exempt category of products which use only plant oils as active ingredients, as listed in Annexe IIB (Pesticides) of Council Regulation (EEC) No 2092/91 (as amended). It successfully rids animals, including Cattle, Horses and Poultry of both Sucking and Biting Lice; which are normally dealt with separately, and will help to prevent reduced growth rates, which can result from Lice infestation. Barrier Animal Healthcare does not recommend the use of Livestock Louse Powder on Sheep due to the density of the fleece – refer to ‘Blowfly Repel’ and ‘Barrier D Sheep Dip Formula’. This strong formulation contains concentrated plant derivatives that act as a slow release to give up to six weeks protection with one application.
Barrier Animal Healthcare is the only company to include sterilizable maize powder as the base carrier for the louse powder and unlike other carriers it will not be metabolised via any cuts and so will not form granulomas. After identifying that lice is the problem. Thoroughly cover the animal with the product, paying particular attention to the neck, under the elbows, legs, along the back and at the base of the tail. Use a soft brush to ensure that the product is thoroughly worked into the coat and down to the base of the hair. Where heavy infestations exist, repeat application within 5 days and as necessary until you
are on top of the problem. HSE Licence No. 8712. In accordance with 2006 repellent regulations under the Biocidal Products Directive, Barrier Animal Healthcare has secured all the necessary licence approvals and licence numbers well in advance of the regulatory deadlines. All of Barrier’s products contain the highest quality 100% natural, nonirritant ingredients that are totally safe to the animal, the user and to the environment. Available in a 5K bucket and a 500g shaker. Barrier Animal Healthcare -visit www.footrot.co.uk or www.flyrepel.com
Novartis Animal Health announce launch of new Farm Animal Health website ovartis Animal Health has launched a new website providing product information, the latest news, up to date advice and insights into key issues facing the farming industry.
N
Nikki Crossley, Associate Brand Manager at Novartis Animal Health, says, “This new site is set to offer our customers a fantastic new resource and learning space as well as an opportunity to
16 | Farming Monthly | March 2012
interact with us as a company. We aim to provide a service which is not typically associated with animal health companies and bring key elements of the industry closer together.”
Farmers, vets and SQPs are invited to join the online community at www.farmanimalhealth.co.uk where you can register for free.
www.farmingmonthly.co.uk
| Grain
Grain storage: managing moisture One of the most energy-intense elements of cereal production. et harvest conditions create significant challenges for the safe storage of grain, and with variable weather becoming a common feature at harvest, grain often has to be cut at higher moisture levels than desired. Increased moisture in the grain can lead to the development of storage mycotoxins (ochratoxin A) as well as quality degradation, and therefore all processors operate tight market specifications on moisture contents (mc). Meeting these specifications is not always easy and it can be one of the most energy-intense elements of cereal production. Improving energy efficiency and meeting end-user requirements are both strategic priorities for HGCA and a range of research has been funded in this area. HGCA’s Grain Storage Guide provides key information on postharvest grain management and includes a comprehensive section on grain drying best practice. The guide also mentions ongoing work
W
www.farmingmonthly.co.uk
to improve grain drying processes. HGCA has invested ÂŁ75,000 in a two-year research project (3615), based at FERA, with support from independent consultant, David Bruce, investigating ways to improve grain drying efficiency. The project is looking at how grain stirrers can be used in combination with heat to improve the drying performance of nearambient air drying facilities. Grain storage and drying facilities differ from farm to farm, but with energy costs rising, many growers are turning to near-ambient air systems as a lower cost alternative. The trouble with a static bed of grain is that material on the top of the bed can dry too slowly which increases the risk of mycotoxin formation, whereas the material located near the air inlets tends to become overdried. The solution is potentially simple - install augers to mix the grain. Augers are probably best known for their role in soil
sampling but the concept is the same, the corkscrew movement of the auger enables grain to be drawn up from deep within the bed and deposited on the top. The research has demonstrated that the stirring action produced by augers produces a cone of completely mixed grain, which is a blend of both vertical and lateral mixing. When compared to conventional storage methods, the uniformity of drying has been shown to be much improved when using augers. Because of the excellent results, the technology could also be used to allow even greater grain storage depths to be used without increasing spoilage risk. Because augers efficiently breakdown moisture and
temperature gradients in stored grain, it could also allow for much higher air temperatures to be used for drying. This was investigated by computer simulation in the research trials and the air temperature was raised from 20 to 500C. The higher temperatures led to large reductions in drying time and electricity use, although fuel costs were not reduced. The project is now in the final stages and the research team are completing data analysis, including analysis of the best timing and duration for auger operation. Further information on the project, as well as other HGCA-funded grain storage research can be found at www.hgca.com/grainstorage.
March 2012 | Farming Monthly | 17
| Grain
Keeping a sharp eye on stored grain Barn Owl is the most comprehensive and reliable store monitoring and control system available.
he award-winning Barn Owl Wireless system from Martin Lishman Ltd is the most comprehensive and reliable store monitoring and control system available. Winner of the Best New Product or Innovation with a price of under £10,000 at LAMMA 2012, the system can cut the time and cost of store management dramatically, while ensuring stored crops are kept in optimum condition.
T
The system enables store managers to monitor and manage grain stores remotely via a unique combination of radio signals, GSM data transmission and cloud computing. It is accessed via the internet, including via several makes of smart-phone, and enabled users to manage their stores based on reliable and regularly updated data: “Users who tested the system in
18 | Farming Monthly | March 2012
autumn 2011 say it is very simple to install and use, with savings of up to 40% in grain cooling costs being achieved, along with significant time savings in store management. The ‘peace of mind’ gained from being in total control of their stores for the first time is a major benefit”, says Dr Gavin Lishman. The system uses sensors located on probes driven into the grain at 6m intervals to feed temperature readings back to the Barn Owl Gateway, a unit that collects the data, which must be placed high in the building with a clear line of sight to each sensor. This unit transmits the data back to Martin Lishman Ltd’s headquarters at Bourne, Lincolnshire via a GPRS mobile phone data link, where it is collated with all previously received data. Farmers can log into their own barn Owl Wireless web page and check temperature and humidity readings for all their stores, and manage the fans in each store according to the data, either switching them on or off, or resetting temperature thresholds at which they turn themselves on or off automatically. The system works equally well with pedestal fans and under floor ducts: “The users who tested systems last autumn reduced grain temperatures to below 10 C by the beginning of November – something that would not have been possible without such a finely-tuned control system. They report huge cost savings, by up to 40% in some instances”, says Dr Gavin Lishman. “Other practical benefits were also commented on – including a huge reduction in the amount of time taken to check stores at a time when management time it is at a premium. “Technically farmers could log
in from anywhere in the world and see what is happening to their crops. The records the system produces also satisfy the needs of all major crop assurance schemes. “Because it is not reliant on any computer software it is ‘futureproofed’, so users can change computers without causing any problems”. They system took some 2,500 hours of development work to ensure it could collect, collate and store huge amounts of data – each temperature sensor sends a reading every three hours – and present it as useful management information. “We have developed a completely new range of cropstore-friendly radio transmitters and receivers, and then design new data handling protocols to ensure we provide customers with what they want – a reliable and accurate supply of information that is continuously updated so they always know the conditions in which their valuable crops are being stored”. The company expects the system to be of interest to managers of grain store complexes and refrigerated potato stores. It is currently examining several new features in response to customer enquiries, including wind speed measurement, security systems and CO2 monitoring: “We are confident we will be able to develop the system so it can handle these extra functions in future”, says Dr Lishman.
“The system enables store managers to monitor and manage grain stores remotely via a unique combination of radio signals, GSM data transmission and cloud computing.” www.farmingmonthly.co.uk
| Grain
Mercedes-Benz Actros go with the grain for Openfield rain merchant Openfield has sown the seeds of future success by commissioning a new fleet of 11 premium specification MercedesBenz Actros tractor units. The move follows an outstanding performance from Openfield’s first six Actros, which had been on the road since 2006 and proved both reliable and fuelefficient. “Those first Mercedes served us very well indeed,” confirmed Contract Manager Keith Hughes. “There was hardly any downtime, which is no mean achievement
G
when you consider the nature of our work; our trucks pull bulk tippers and go onto farms every day, where the rough tracks and yards can be tough on chassis. “But experience has proved that the Actros is up to the job and can stand the test of time. The fuel returns are also very good while our drivers, some of whom have been with us for many years, like the Mercedes too.” Openfield is the UK’s largest grain co-operative. It works in partnership with global logistics specialist DHL and has headquarters near Grantham,
Lincolnshire, as well as a network of depots nationwide. Supplied by Peterborough dealer Intercounty Truck & Van, all are Actros 2546 models with flatfloored MegaSpace cabs and 460hp engines which drive through 12-speed Mercedes PowerShift automated transmissions. Openfield was formed in November 2008 with the merger of two farmer-owned businesses, Grainfarmers (which had roots dating back to 1907) and Centaur. A key supplier to leading brands such as brewer Molson Coors,
Sainsbury’s and Warburtons, it undertakes around 450 grain movements every day. Together, Openfield and DHL strive to optimise costs and service from farm gate to end user. Their collaboration has delivered reductions in farm and mill turnaround times, a 40 per cent service improvement to mills, and a 10 per cent reduction in road miles covered compared to previous seasons. Visit www.openfield.co.uk
Wireless temperature monitoring from CropCool Control your grain storage more efficiently and more cost-effectively than ever. ropCool Wireless is the next generation of Differential Crop Temperature Controller for grain stores which empowers the busy farmer to manage his grain more efficiently & even more costeffectively’ declared Charles Goldingham. There are no trailing leads, massive power savings and the system enables farmers to monitor & store data either on or off-site, depending on need. Full fan control can be retained by the farmer locally on-site (as for the existing cabled CropCool). The CropCool Wireless Temperature probes, with a long battery life, have a range of up to 100metres. The data can be viewed or stored either in the grain store or sent by repeater to the farm office up to a mile away or with broadband or a mobile phone link the data can be viewed at any distance. “This will be really helpful for the busy farmer running several grain stores. The greater the distance the greater the benefit!’ said Charles. CropCool Wireless enables
C
www.farmingmonthly.co.uk
farmers to control their fans by temperature differential etc, humidity & time (& other parameters) as well as manage them in up to 4 zones per controller. Easily adjustable factory settings will be similar to those already well-proven in cabled CropCool, but updated to take account of climate change. EasyGrain Software enables the farmer to view each temperature sensor on his PC with a schematic of your store, which is supplied free with each control system. Charles Goldingham said of CropCool “I really like this system as it enables farmers to start with the complete system. Or if he prefers, he can be build up his system gradually to suit need or whilst gaining confidence. “For example he can start with monitor only; then add control, data storage, remote access etc. in whichever order is preferred or suits the farm best. Also for a small subscription fee, the farmer can also have remote viewing & monitoring by the system manufacturers Farmex, who also provide full back-up for the system.”
“We chose this system as it is already well proven within intensive livestock industry where quality ventilation control is essential to achieve highest welfare standards.” CropCool Wireless uses Dicam Wireless technology which
provides ultimate flexibility to fit each arable farmer’s individual applications & can be updated with the latest technological developments.
March 2012 | Farming Monthly | 19
| Grain
Coastal Grains relies on BDC Systems for state of the art grain drying Acquisition of third grain dryer from BDC will further bolster services. oastal Grains, the UK’s second largest cooperative grain store, has once again turned to BDC Systems for a new Svegma grain drier. Supplied through local agent Yorkshire Storage Systems, this third drier demonstrates the continuing commitment to BDC Systems’ grain drying and handling technology in a relationship that has now lasted over 14 years. Coastal Grains’ first BDC Systems order was for two
C
Skandia conveying lines, each operating at 60 tonnes per hour. When the store was expanded to 85000 tonnes capacity, two further Skandia conveyors were ordered followed by three replacement elevators and four conveyors. Then in 2010, when the plant in Belford, north Northumberland, was the subject of a £2.5 million upgrade, Svegma driers were specified, offering a drying capacity of up to 240 tonnes of grain per hour. This latest drier is a Svegma 6m drier rated at 80
tonnes per hour removing 5% moisture at 100ºC, nominally 100tph on feed wheat. Coastal Grains’ Chief Executive Terence Pardoe said: “The acquisition of a third grain drier from BDC Systems represents Coastal Grains’ continued investment in state-of the-art technology which will further bolster grain drying and handling services for our members through increased productivity and improved throughput.”
network for the agricultural market and through specialist companies for industrial projects. Bentall Rowlands has an extensive product range to meet the requirements of an everchanging market. Within our portfolio we manufacture a variety of silos such as flat-bottomed silos and complementing this, Bentall’s also produce an extensive range of silo accessory equipment and on floor storage equipment. Close relationships with key raw material suppliers allow a program of continual product improvement. Improving product quality and supply by utilising the latest raw material technology ensures Bentall’s stays ahead of the rest, supplying the best quality steel at competitive end product prices. New product launch We are now faced with increasing water scarcity due to climate change and increasing
demand mainly driven by population growth. Risks to water ecosystems due to abstraction of water from rivers, lakes and aquifers are bcoming ever more recognized. Government already intervenes in this area through regulating water abstraction and implementing public water resource management systems. Pending new legislation change regarding water extraction will affect all farmers who currently extract water from a local stream or river. Due to this potential need to store on site water irrigation systems, Bentall Rowland's is launching an economical range of water tanks in an effort to assist farms to become more environmentally friendly and help prevent the depleting water supply in streams and rivers. For further information or visit www.bentallrowlands.com
Efficient storage solutions Bentall’s stays ahead of the rest. entall Rowlands Storage Systems is renowned worldwide for its design, manufacture and installation of Grain Storage Silo’s and ancillary equipment. Rising demand for bulk storage and handling equipment
B
worldwide, increased volumes and competitive pricing in grain handling charges requires efficient solutions. Bentall’s has worked with many of the UK’s Co-operative central stores. We market our product range through an extensive dealer
20 | Farming Monthly | March 2012
www.farmingmonthly.co.uk
| Grain
Master Drier 2012 Range Offering such a wide range of equipment and services – could this be a Rekord? Equipment for all your grain drying requirements.
n 2012 Master Driers celebrate their 30th anniversary of supplying the UK Agricultural industry with its highly acclaimed range of mobile grain Driers. From small beginnings back in 1982 supplying a small 5 Ton drier we have grown to become one of the leading Grain Drier suppliers in the UK. We confidently expect by the end of the 2012 season to have supplied over 2000 Driers during the last 30 years to the UK and overseas markets. Our range today covers models from 12-45 tons incorporating tractor PTO drive or electric drive with the option of full automation
I
www.farmingmonthly.co.uk
with Mastermatic control systems. Add to this dust extraction, auto lube, a three stage burner system and a 450 mm diameter centre auger and you are looking at the very best in mobile grain drying. We are also introducing for 2012 our brand new moisture meter that can be fitted on to any mobile grain drier. This will provide you with the exact moisture of the crop throughout the drying cycle from loading to unloading. It is calibrated for up to 6 crop types and can be manually adjusted to agree with the ‘on Farm’ grain store meter. For Customers who want to upgrade their Drier please get in touch with us to discuss ‘trade ins’ and financing at an early stage before the current Tax allowance limits are revised. For those Customers who value a pre season service we are offering a special deal that includes free fitting of the Moisture meter when ordered with an annual service. We look forward to meeting old and new customers at the Cereals event during June of this year. Call Master Driers on 01787 228450 or visit www.masterfarm.co.uk
Warwickshire based company is eager for you to find out...
ased in the heart of Warwickshire, Rekord Sales (GB) Ltd was founded in 1956 and has, for many years, specialised in grain drying and handling equipment but this isn't the only string to their bow. Supplying a wide range of general equipment and machinery from Verge Mowers, Barrier Mowers, Power Harrows from 1.5 metres to 5 metres, Tractor mounted Flail Mowers from 1.5 metres – 4.5 metres. Combine choppers and chaff spreaders. Pea Headers from 4.8 meters – 7.5 metres. Mini Balers and Wrappers. Also available 4ft to 5ft Balers and Wrappers. Bale Unroller - Feeder Sidewinder, Combi-Feeder, Big 'B' Subsoiler and MCS Cultivator.
B
Grain Stirrers from 15ft to 45ft. Augers from 6-10- up to 75ft long,Trailer mounted Drill Fillers and Fertilizer Bag Lifters. The Company also supplies Fans and Heaters for grain drying. They can also offer space in their warehouse for other companies wishing to stock and distribute its products from a central UK location. Rekord offer advice on their equipment and carry a comprehensive range of spares for all their machinery. Rekord's dealers are always available to help Customers with parts or problems. For more information, give them a call on 01827 712424 or email ray@rekord.com.
March 2012 | Farming Monthly | 21
| On Topic
On Topic Schmallenberg Virus Information courtesy of DEFRA & AHVLA (Animal Health and Veterinary Laboratories Agency)
Schmallenberg virus Background information relating to the outbreak.
etween August and October 2011, outbreaks of disease in adult cattle that included mild to moderate fever, reduced milk yield, loss of appetite, loss of body condition and diarrhoea were reported in both the Netherlands and Germany. Testing for common causes proved negative. From November 2011, abortion and stillbirths associated with foetal abnormalities, affecting mainly sheep but also cattle and goats, were identified in the Netherlands, Germany and Belgium. A new virus was identified in December 2011 as the cause of both conditions. This was named ‘Schmallenberg virus’ after the German town where the virus was first identified. In early 2012, the first cases were suspected in the south and east of England. In these initial cases, the disease was diagnosed following the testing of deformed lambs. Schmallenberg virus is in the Simbu serogroup of the Orthobunyavirus group. This group of viruses includes many different viruses which occur in Asia, Africa and Australia, but have not previously been identified in Europe. As this is a newly identified virus there are still aspects of the disease that remain unknown at this point until more research has been done. Geographical distribution The disease is widely distributed in the west of Germany, throughout the Netherlands, and in parts of Belgium and northern France and has been detected in England. Species affected Currently we know the virus will infect and cause disease in sheep, cattle and goats.
B
22 | Farming Monthly | March 2012
Transmission Orthobunyaviruses are typically primarily spread by biting insect vectors, such as midges and mosquitoes, although the routes of Schmallenberg virus transmission have not yet been confirmed. The potential for direct transmission (i.e. direct from one animal to another) is therefore, as yet, unknown. If biting insect vectors are the major route of transmission, significant spread is believed unlikely during the winter period when biting insects are usually inactive. It is believed Schmallenberg virus was circulating widely in sheep and cattle in the Netherlands and in a part of western Germany between August and October 2011. The initial introduction of the virus to the UK therefore may have resulted from either wind-blown insect vectors or via imported infected livestock during this period. Clinical signs In adult cows, cases of acute infection have resulted in diarrhoea, fever, a reduction in milk yield, with a full and rapid recovery over several days. Affected herds had outbreaks of disease lasting two to three weeks. In other species this stage of the disease has not been noted. Clinical signs have not been reported in adult or growing sheep. In newborn animals and fetuses, the disease has been presented as malformations including bent limbs and fixed joints, brain deformities and marked damage to the spinal cord. Some animals are born with a normal outer appearance but have nervous signs such as a ‘dummy’ presentation or blindness, ataxia, recumbency, an inability to suck and sometimes
fits. The foetal deformities vary depending on when infection occurred during pregnancy. Risk to humans There is unlikely to be a risk to human health from Schmallenberg virus; but this is not yet certain. Farmers and veterinary surgeons are advised to take sensible hygiene precautions when working with livestock and abortion material. Although several members of the group of related viruses can affect humans, the ability to do so is thought to be due to a gene sequence which is not present in Schmallenberg virus. Pregnant women should not have contact with sheep and goats at lambing/kidding time due to risks of exposure to other disease causing organisms. Treatment and control There is no treatment or vaccine currently available for this disease. As this is a new disease further work is needed to determine what control measures may be appropriate. Diagnosis This is not a notifiable disease, but farmers are asked to contact their veterinary surgeon if they encounter cases of ruminant neonates or fetuses which are stillborn, show malformations or are showing nervous disease. Veterinary surgeons should then contact their AHVLA/SAC laboratory if they suspect infection with the virus. Suspect cases will be sampled for histopathological and virological examinations. Confirmation of infection is by detection of virus sequences using real time PCR on tissues. There is currently no blood test available but work is in progress to develop one.
www.farmingmonthly.co.uk
| On Topic
On Topic
2 March – Schmallenberg virus: further updates on GB testing results. chmallenberg virus (SBV) infection has been identified on 92 farms. Seven of the positive cases have been diagnosed in cattle, 85 in sheep, and none to date in other species. So far, none of the affected farms have reported importing animals during 2011 from the affected areas in mainland Europe. SBV infection has so far only been identified in areas at risk of midge incursion from Northern Europe during summer / autumn 2011.
S
County
Positive Holdings Positive Holdings (Sheep) (Cattle)
Berkshire
1
0
Cornwall
1
0
East Sussex
17
0
Essex
5
0
Hampshire
2
0
Hertfordshire
4
0
Isle of Wight
1
0
Kent
15
1
Norfolk
14
3
South Gloucestershire
1
0
Suffolk
12
2
Surrey
2
0
West Sussex
9
1
Wiltshire
1
0
Total
85
7
Figures correct as of 2 March 2012
Schmallenberg Virus Information courtesy of DEFRA & AHVLA (Animal Health and Veterinary Laboratories Agency)
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 23
| Sheep & Lambing
Stem lamb losses and save £’s Advice from NSA on a successful and productive lambing season.
ambing is in full swing in many flocks around the country already, but if you’ve yet to get started there’s still time to give consideration to a few simple tweaks to your flock health plan to help stem neonatal losses. Neonatal lamb losses continue
L
to occur at around the 15% mark – with the current positive returns from the market place can any of us afford to lose that much income? A 15% loss can easily equate up to £3,000 for an average 250 ewe commercial lowland flock. Our inputs increase in cost all the time, so it’s essential
24 | Farming Monthly | March 2012
we seize every opportunity to maximise returns and stem those losses. Neonatal lamb mortality can be significantly reduced with the implementation of a good flock health plan, in conjunction with good husbandry and management. Despite the traditional view that a flock health plan is something merely to keep the assurance inspector happy for another year and is too much hassle for a busy shepherd to complete, in reality a good health plan is a dynamic and incredibly important document to measure productivity and help you save time. Prevention is always better than cure so drawing up a good health plan with your vet, is time and money well spent. With the main lambing season about to begin, dealing with casualty stock inevitably becomes more commonplace. Treating casualty stock humanely is a legal requirement and in addition dealing with cases sensitively and responsibly is an essential part of maintaining the image of our industry. It is worth bearing in mind that Spring is a time when the public start to get out into the countryside more and in many cases we have casual labour helping out with lambing duties that may be entirely new to farming activities. A very useful document produced by the Sheep Veterinary Society can be found at www.sheepvetsoc.org.uk/docs/Ca sualtysheep.pdf and remember that if dispatch is necessary then this should be done as humanely and compassionately as possible, with carcasses being kept secure and out of contact until disposal. Unfortunately this year we have
a new and unusual threat to deal with – schmallenberg virus. There is limited knowledge of this new virus with research into transmission, susceptibility, development of immunity all in the very early stages. For up to date information keep an eye on the AHVLA website. AHVLA have also published an information document for farmers and vets. www.defra.gov.uk/ahvla/news . NSA would urge all producers to remain vigilant, and where a suspicious case arises, take advantage of the FREE and CONFIDENTAIL reporting service offered by AHVLA. Signs to look out for are: Adult animals In adult cows the acute infection resulted in diarrhoea, fever, a reduction in milk yield, with a full and rapid recovery over several days. Affected herds had outbreaks of disease lasting two to three weeks. In other species this stage of the disease has not been noted. Clinical signs have not been reported in adult or growing sheep. Newborn animals and fetuses The second presentation of the disease is associated with abnormalities in animals born alive or dead at term or aborted following infection of the dam, affecting mainly sheep but also cattle and goats. Malformations observed to date include bent limbs and fixed joints (arthrogryposis) and brain deformities (spaces filled with fluid in cerebral hemispheres, abnormally small parts such as cerebellum and brainstem) and marked damage to the spinal cord. Some animals are born with a normal outer appearance but have nervous signs such as a ‘dummy’ presentation or blindness, ataxia, recumbency, an inability to suck and sometimes fits. The foetal deformities vary depending on when infection occurred during pregnancy.
“A 15% loss can easily equate up to £3,000 for an average 250 ewe commercial lowland flock.”
www.farmingmonthly.co.uk
| Sheep & Lambing
Spring Lambing Day – Sunday 11th March 11am-4pm Have a great day out with the whole family - plenty to see and do! great weather. Need directions? Visit our website at www.wnsc.ac.uk and click on how to find us for a map and directions. We are situated on the Baschurch to Shrewsbury Road. If you have satnav, our postcode is SY4 2HL. Alternatively, give us a call and we will direct you in! 01939 262100. N.B. Please note pregnant women are advised not to visit the lambing sheds or the alpaca enclosures.
he Walford Campus of Walford and North Shropshire College will be holding its annual Spring Lambing Day on Sunday 11th March. Starting at 11am and running through till 4pm this is designed to be a Fun Day Out. At just £9 per car it’s also a really affordable treat for all the Family! There will be so much to see and do:Come and see • Our lambs and calves. With the birth of 30 lambs and a calf on the day itself last year, many of our visitors were able to be present at one of these awe-inspiring events. • Have a wander around the award-winning, eco-friendly Harris Centre which houses over 90 species of animal, including exotics, meerkats, alpacas and birds of prey. Here, you can find out more about the courses on offer at the college and even enrol! • Enjoy a hearty Hog Roast. Our on-site restaurant will be open on the day should you desire a full lunch or even just a cup of tea! • Have fun on the Climbing Wall or why not try out the Super Zorbs, new for this year!
T
www.farmingmonthly.co.uk
“Have a wander around the award-winning, eco-friendly Harris Centre which houses over 90 species of animal, including exotics, meerkats, alpacas and birds of prey. Here, you can find out more about the courses on offer at the college and even enrol!”
• Watch one of the animal display teams in action. These will include Dog Agility, Equine Display and Shropshire Gun Dogs being put through their paces. • From the specially designed viewing gallery you will have a really good vantage point to see our dairy cows being milked. • Take part in our wonderful ‘Great White Shark’ treasure hunt • Have a look around some vintage and contemporary machinery. See how much Agricultural equipment and methods have changed over the years. There will be face painting, bouncy castle and chicks hatching Interested in the Countryside? With Countryside and Land Management displays you’ll find out everything you need to know in the perfect setting. Finally, there are free tractor and trailer rides around the farm, a great way to see the campus and to learn a little about farming en route! We have provided plenty of parking so just pop along anytime after 11am and before 4 pm. We are keeping our fingers crossed for
March 2012 | Farming Monthly | 25
| News
Flexible Finance With Tong Peal Customers can get a quick finance quote and secure terms to suit individual requirements. s part of Tong Peal’s continued effort to increase availability of its machinery throughout the whole of the agricultural growing and packing industry, it has introduced a highly competitive finance programme. The scheme, which will be available on all of the latest 2012 machinery, including the awardwinning, market leading grader – The Caretaker 2012, will enable customers to specify and purchase new equipment, using a flexible repayment schedule. Working in partnership with global finance solutions provider
A
De Lage Landen, the scheme will help to improve bankroll management for growers andpackers alike, providing flexible payment terms to suit individual customer requirements. Tong Peal’s finance solution is highly competitive and will help to make investment possible for agricultural customers who are not in a position tofacilitate full payment in a single bulk sum. “It’s been a tough season for growers and packers alike and we know finance is a key point on the industry agenda” says Charles Tong, managing director at Tong Peal Engineering. “As well as
continuously expanding our sales network throughout the UK and worldwide, we hope that the introduction of our new flexible payment scheme will give more growers and packers the opportunity to invest in the latest and most efficient machinery, which will ultimately help to increase the value of their crop during this challenging and competitivemarket climate. “Traditional repayment schemes often use an intermediary broker agent but as we offer our finance programme direct with the finance provider, Tong Peal finance solutions are highly competitive
and repayments can be specified depending on individual requirements. “Customers can get a quick finance quote, by providing us with the order value, deposit, repayment schedule and payment term. It really is that simple.” For further information about Tong Peal’s flexible finance scheme, or its range of handling and sorting equipment, visit www.tongpeal.co.uk or call 01790 752771 for a quick quote.
Save the date! Rickerby Ltd to host their Spring Show Put March 7th and 8th in your diaries and make a date with Rickerby. ext month will see Rickerby Ltd host their annual Spring Show. Now onto their 11th, the show has gone from strength to strength. With around 3500 attendees anticipated, Rickerby will have on display a vast array of machinery
N
and equipment from all their major manufacturers. Including these will be Abbey Machinery, Ireland's longest established manufacturer of agricultural machinery and one of the largest in Ireland today. Martyn Henderson of Rickerby
26 | Farming Monthly | March 2012
commented “This years show has an under cover area bigger than a football pitch, so no matter what the weather conditions visitors can peruse without the worry of outdoor elements”. The show takes place on March 7th and 8th, so make sure you pop
along and see the amazing display of machinery and equipment. Doors will open to all from 12 noon until 10pm at Rickerbys Carlise depot, based at Currock Road.
www.farmingmonthly.co.uk
| Buildings
The Agricultural Buildings Show 2012 Drawing together all aspects of the agricultural building industry under one roof. he Agricultural Buildings Show, to be held at Stoneleigh Park (NAC), Warwickshire on Tuesday 27th March, provides a practical insight into the planning, design and construction of all kinds of installations from the simplest barn through to a complete new grain store or milking parlour. This unique showcase draws together all aspects of the agricultural building industry under one roof, providing essential information on everything from initial planning advice through to selecting materials and equipment to finding the best contractor. It also an opportunity for visitors to investigate all aspects of a project, including the equipment and installations that will be used inside the structure. “A new farm building - for housing stock, grain storage or a milking parlour - is probably the largest investment a farm is likely to make in a generation,” says Andy Newbold of show organiser, Fusion Events. “As severe weather in past winters has shown, it is vital to ensure the structure is designed and built to the correct standards using qualified and reputable
T
www.farmingmonthly.co.uk
contractors. These are the companies that exhibit at the event.” The show is organised in association with Rural & Industrial Design and Building Association (RIDBA), which has detailed knowledge of the function and environmental requirements of modern agricultural and industrial buildings. Its members, many of which will be at the event, offer a breadth of expertise about the siting, planning, design and construction of farm buildings. This expertise also extends to conversion for diversification and other rural building design issues. “The structure of the building is just one, albeit highly important, aspect of the project,” adds Mr Newbold. “At the Agricultural Buildings Show, visitors will also be able find the latest ideas about energy saving and generation, grain handling, cow housing and management as well a raft of specialist equipment and applications.” Alongside the exhibition, in the leading seminar programme, visitors can also learn about the latest building and planning issues, as well as hear about the
practical aspects of managing a project from start to finish. This year’s planned presentations include: * Practical project management: We follow a project from start to finish, finding out how working closely together with designers, project managers and contractors farmers can help ensure the building meets their precise needs. * Farm Building Buying Guide: Experts from RIDBA and NFU explain the details of their nononsense guide to asking the right questions when buying a farm building to ensure it is properly fabricated, constructed and safe for its intended use. * Countryside planning: The draft National Planning Policy framework, published in July 2011, talks about a ‘presumption in favour of sustainable development’. This seminar provides expert advice about what this actually means and the implications for farmers and landowners. * Diary cow housing: The design, layout and management of dairy buildings can have a significant effect on many areas in
milk product. Find out how advanced in ventilation can combat disease, the latest ideas on cubicle designs for cow comfort and mastitis control.
“This unique showcase draws together all aspects of the agricultural building industry under one roof, providing essential information” * Grain store design: A new grain storage set-up is often a once in a life-time investment, which needs detailed planning. We find out how one farm went about the planning process, find the right building, its erection as well as selecting and installing the equipment inside. Agricultural Buildings Show Date: Tuesday 27th March 2012 Address: Stoneleigh Park, Warwickshire, CV8 2LZ Tickets: £7.50 if booked in advance (£10 on the door) Tel: 0845-4900-142 Web: www.farmsmart.co.uk/abs/booking
March 2012 | Farming Monthly | 27
| Buildings
Save time and effort... Fixed price deals on standard building packages. owie Lockwood Structures Ltd realises that the modern farmer has little free time to organise or work on the construction of new buildings and can often find it difficult to locate an experienced contractor who will undertake the management and construction of all of the required elements. In light of this, they are advertising fixed price deals on standard building packages, encompassing all elements of the buildings from the planning application through to the concrete floors. At the same time they continue to offer a full range of services from supply only kit
B
frames through to complete new farm builds. In the words of John Bowie, “Many farmers think that they can make large savings by managing and undertaking elements of a job themselves, but in actual fact an experienced firm like ourselves can put together a very reasonably priced package. In addition to the security of a fixed price contract we aim to reduce the stress that a building project on your farm can cause by managing each stage for you.� Under current H&S legislation, it is the responsibility of the client to ensure that they are employing a competent contractor; all Bowie
Cattle unit ready for use Lockwood personnel are appropriately trained and use the necessary plant and equipment to make the construction of your building an efficient and safe process. The company has been established for 17 years and between them their personnel
have experience of all types of farm building construction, from traditional agricultural applications to new diversification projects. Bowie Lockwood is a corporate member of RIDBA, a guarantee of their attention to design detail and H & S management
Farm building buying guide launched by RIDBA Get your copy at the Agricultural Buildings Show 2012, 27th March Stoneleigh, Warwickshire. IDBA and the NFU have launched a guide to help farmers when they buy buildings. A buying guide which helps farmers ensure they get a farm building that is properly fabricated,
R
constructed, and safe and appropriate for use, has been launched by RIDBA (the Rural and Industrial Design and Building Association) in partnership with the NFU. Free copies of the four-page A5
28 | Farming Monthly | March 2012
guide will be available at the Agricultural Buildings Show on March 27th when RIDBA experts will talk about one of the biggest issues on the farm building calendar - the compulsory introduction next year of CE
Marking. In a seminar on the 27th March Tony Hutchinson, RIDBA National Secretary, will explain the back ground to the advice and provide
continues
www.farmingmonthly.co.uk
| Buildings continued more details on how important it is that the advice is followed. It was the impending CE issue, which could impact on the price of new farm buildings, and the major collapse of several farm buildings in the heavy snowfalls of winter 2010/11, that prompted RIDBA to publish the guide with the help of the NFU. CE Marking will apply to all steel, concrete and timber frames used in the UK from July 2014 when it will become a criminal offense to supply a frame without a CE Mark. Complying with this legislation will prove costly for manufacturers and fabricators and some may choose to pass that cost onto their client - farmers. As well as CE Marking, the RIDBA guide provides information on meeting Building Regulations, British Standards and Health and Safety obligations and whether or not planning permission is required for specific farm buildings. It also advises on design classifications and build considerations, self-builds,
www.farmingmonthly.co.uk
insurance, and loadings including renewable energy sources such as solar panels and wind turbines. RIDBA secretary Tony Hutchinson said: "The guide aims to give farmers the knowledge to ask the right questions when buying a farm building so they get a building that is properly fabricated, constructed, safe and most appropriate for their intended use.
“A buying guide which helps farmers ensure they get a farm building that is properly fabricated, constructed, and safe and appropriate for use, has been launched” "The CE Marking issue alone demonstrates how important it is for farmers to use contractors which are reputable and competent in health and safety and we can help them find one in their area."
GEA Farm Technologies opens its doors at Agricultural Buildings Show f you’re at the Agricultural Buildings Show on 27 March at Stoneleigh Park then why not make a day of it and visit the GEA Farm Technologies stand and new facilities. Visit the GEA Farm Technologies stand to find out about our Royal De Boer livestock housing range and Houle superior slurry systems, plus collect your voucher for free hog roast and refreshments* at the new GEA facilities, which are also based on site. GEA Farm Technologies Managing Director, Paul Gerrard, said: “This is the first agricultural event to be held at Stoneleigh since we moved in October 2011, so this is a great opportunity for us to open our doors and show farmers what we have to offer.” As well as enjoying your free lunch you can meet the team and take a look at the new facilities including our dairy design centre. Technical Support Specialist,
I
Sarah Lawrie, will be on hand to explain our Project Design Service, a free and bespoke farm planning programme where it is possible to visualise your dreams on screen and, in CAD walk-through, see how your project could evolve from start to finish. Visit GEA Farm Technologies on stand 10 at the Agricultural Buildings Show to collect your free lunch voucher. For more information or a pre-show voucher call 02476 692 333 or email info.geafarmtechnologies.uk@gea group.com
March 2012 | Farming Monthly | 29
| Buildings
Moore Concrete launches new slip resistant slat range Safety of the floor is of paramount importance. oore Concrete has launched a range of new slip resistant slats, designed to give cattle that allimportant, extra sure footedness when travelling across a suspended floor. “The slats feature a specifically finished surface, designed to reduce the risk of slipping,” confirmed Moore Concrete’s Keri McGivern. “Given the fast increasing prices of livestock, the financial impact of an animal falling and subsequently hurting itself could be significant. Therefore the safety of the floor is of paramount importance. “Our slat design ensures quick and effective slurry run-off into the tank below. This means hoof problems, such as slurry heel and digital dermatitis are minimised.” The Steele family milk 400 high yielding cows near Kircubbin in Co
M
30 | Farming Monthly | March 2012
Down. The decision was taken recently to build a new cubicle house for up to 50 fresh calving cows. Significantly, the family opted to install the new slip resistant slats from Moore Concrete over the slurry tank. “We wanted to give our fresh calvers the best possible accommodation option for the first few weeks of their lactation from both a production and welfare perspective,” Thomas Steele explained. “The slats are now in place and the house is taking shape.” The Steele family also fitted out the new house with Moore Concrete cubicle beds, end cubicle walls and the company’s in-house drinker, which is positioned at the end of the cubicle run. For further information, contact Moore Concrete on 02825 652566
www.farmingmonthly.co.uk
| News
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 31
| Buildings
Optimize cow comfort with the Optima Mattress Housed cows can spend up to 60% of their day lying down, improving blood flow to the udder which results in more positive milk production. And a higher yielding herd is a more profitable one! eemore Engineering Ltd are proud to be exhibiting again at this year’s Farm Building show. We find the buildings show fits perfectly with our comprehensive range of livestock housing equipment.
T
Cow comfort is essential for higher yields. At this year’s show we will be show casing our new Optima Mattress the only mattress on the market with a 4% slope built into the last 18” at the heel-stone. The slope increases the drainage off the mattress keeping the bed drier and reducing the likely hood of bacteria building up. The Optima Mattress is a cost effective way of increasing the slope without
altering the concrete itself. The mattress is made up with 3 parts unlike most other mattresses which have just 2 parts. Firstly we have a high quality rubber top cover (strongest on the market). The underlayment is made up of 2 parts, the bottom part is a rubber mat made of particles of butyl rubber glued together and formed into a slope. This rubber mat is then covered with 20mm of high density latex to give the extra softness and comfort. This latex gives the necessary comfort for when the cow is lying down while the rubber mats give the cow the necessary knee protection on rising and lying down. See the Optima Matress for yourself at the Agricultural Buildings Show - Stand 07, call us on 07738455842 or visit
32 | Farming Monthly | March 2012
www.teemoreengineering.com
www.farmingmonthly.co.uk
| Buildings
Cembrit shows off its corrugated sheet range at Agricultural Building Show Third year running for leading buildings specialists at top event. embrit, specialist in corrugated sheet, cladding and roof slates, is returning to the Agricultural Buildings Show for the third year running. Visitors to Stand 3 will have an opportunity to see Cembrit’s corrugated sheeting products, Cemsix and B5, as well as its 3.2mm CH and 6mm HD flat sheet wallboard. “We have decided to exhibit at the show this year, as it always proves a success for Cembrit.” says Ged Ferris, Marketing Manager at Cembrit. “For a one day exhibition, the show offers us the perfect platform for displaying our key products to the agricultural industry as it gets the right visitors through the door.” Visitors to the stand will be able to preview Cembrit’s Cemsix range on display which is ideal for aggressive environments such as livestock housing where the rust and rot proof characteristics of fibre cement make it the most durable roofing and cladding product for agricultural buildings. The product is available in all common sheet lengths, and the standard UK corrugated six inch profile has full BBA certification: 03 with a warranty available on request. Robust and practical – it incorporates reinforcing strips to latest British Standard – and benefiting from 100 years expertise – it requires no maintenance to preserve its strength which ensures it ideal for commercial, industrial and agricultural buildings. The sheets are completely weatherproof and are not affected by destructive fungi, vermin or insects, so will not rot or decay. Cemsix conforms to the necessary fire safety requirements being a Class 0 surfaced material
C
www.farmingmonthly.co.uk
with an EXT.S.AA rating. The Cemsix range also features a wide range of accessories including cranks, ridges and bargeboards. A datasheet is available with full technical information and installation guidance. Also on display is Cembrit’s B5 corrugated sheet - the perfect solution for someone looking to clad or repair single-story buildings such as stables and equestrian buildings. The rust and rot free B5 can be used to a lower pitch and with smaller overlaps in comparison to the traditional 3 inch profile. B5 is available in fourteen different lengths ranging from 4' to 10' 6" and the sheets are approximately 40% wider than the 3” profile which allows for much better coverage per sheet, and an improved water shedding capacity. Available in grey, or with other colours benefiting from Cembrit’s 3 part coloration process which incorporates anti-block rear coat, primer and decorative top coat in a total of 10 colour options. Sheets are available from 4” to 10’6” lengths with matching accessories and can be laid to 10° minimum
pitch. Completing the package of building boards for agricultural use are 3.2mm CH flat sheet wallboard and 6mm HD wallboard. Both are developed for extreme climatic/working conditions, the smooth and easy to clean surface can be pressure washed, providing an ideal material for livestock buildings including poultry houses. The product is
suitable for use in composite panels or as backer for laminates, and has a density of 1700 kg/m3. The board will not support mould growth, and resists insects and micro-organisms. It is a smooth, versatile board which can be used as a backing for laminates, as partition walling, as a balancing board in composite panels or cut to size for all forms of panels and strips.
March 2012 | Farming Monthly | 33
| Energy
ADBA launches free farmers advisory service at Energy Now Expo Take advantage of expert advice. he Anaerobic Digestion and Biogas Association (ADBA) has launched its new farmers’ consultancy service at The Energy Now Expo. The service, which is free of charge, will help farmers and landowners decide whether AD is a viable option for them to consider. Farm-based anaerobic digestion (AD) presents an opportunity for UK farmers, growers and land managers to improve yields, create a new income stream, and reduce their greenhouse gas emissions by generating their own renewable energy and biofertilisers. Gwyn Jones, President of the National Farmers Union and ADBA board member said: “AD is a pivotal mechanism in supporting climate smart farming but the viability of AD for a particular business or site is a complex equation and so it’s important that people receive good quality initial advice to help assess its feasibility. ADBA’s free farmers’ consultancy service is a good start in helping farmers find out if anaerobic digestion is right for your business.” ADBA’s Chief Executive Charlotte Morton said: “Farming is crucial to supporting the British economy and providing the food we need. Today’s farmers are facing a tough economic climate made even more challenging by soaring energy, fertiliser and transport costs. AD not only helps farmers to reduce their greenhouse gas emissions by reducing dependence on commercial fertilisers and traditional transport fuels and energy consumption, but also helps keep farmers farming. ADBA has launched this free service to give farmers, growers and land managers a better understanding of what is involved, giving them the confident to invest the time and money needed to develop a project proposal for funding. AD enables farmers to make the best use of their resources, grow their businesses and protect the sustainability of British farming in the long term”. Further information is available on the farmers’ consultancy page of their website www.adbiogas.co.uk.
T
Key facts you need to know about anaerobic digestion and biogas • Anaerobic digestion (AD) is a natural process which converts organic matter such as household food and garden waste, farm slurry, waste from food processing plants and supermarkets, and sewage sludge, into biogas. • Biogas (which is approximately 60% biomethane, 40% CO2) can be utilised to generate electricity and heat, or, upgraded to biomethane, either used as a transport fuel or fed directly into the UK’s gas grids • According to the Carbon Trust the generation of biomethane would save twice as much carbon dioxide as producing electricity by 2020 • AD is the only renewable that can be scaled up fast enough to enable the UK to reach its 2020 renewable energy target
34 | Farming Monthly | March 2012
• The AD industry has the potential to be worth £2-3bn in the UK alone and employ 35,000 people • Overseas potential is significant and the UK could be a world leader - with the right support now. • AD reduces greenhouse gas emissions by treating organic wastes which would otherwise emit methane (landfill, slurries) and reducing our use of energy intensive commercial fertilisers and fossil fuels • AD preserves critical natural resources such as Nitrates and Phosphorus. Phosphorous is a finite resource for which there is no known alternative. It is critical for plant growth and world resources are already running out. Nitrates are one of the key components of fertilisers. • AD significantly improves Britain’s energy security - we will soon be importing over 70% of our gas • Unlike other renewables, biomethane is generated constantly and can be stored in the gas grid • Biomethane is one of the few renewable fuels for Heavy Goods Vehicles (HGVs) which cannot run on electricity • The AD industry has the potential to generate around 40TWh of energy, equivalent to over 10% of the UK’s domestic gas demand Five facts you need to know about ADBA • ADBA stands for The Anaerobic Digestion and Biogas Association • The Anaerobic Digestion and Biogas Association was founded in September 2009 • Since its launch ADBA has acquired nearly 300 members, including AD plant operators, suppliers, local authorities, farmers including the NFU, utility and energy companies such as E.ON and United Utilities, food producers such as Waitrose and Branston, fleet operators such as Coca Cola and Howard Tenens. • ADBA’s chairman is Lord Redesdale, former Liberal Democrat energy spokesman • ADBA’s aim is to help enable or facilitate the development of a mature AD industry in the UK and to represent all businesses involved in the anaerobic digestion and biogas industries, to remove the barriers they face and to support its members to grow their businesses and the industry to help UK plc meet its renewable energy, climate change and landfill targets, as well as the preservation of critical natural resources.
Other interesting facts about digestate (a valuable biofertiliser) – and why source segregation is important: • 1.1% of the UK’s total GHG emissions come from the production of commercial fertilisers. Scotland estimates that it can replace as much as 25% of these from biofertilisers made from digestate • To produce quality biofertilisers from digestate, it is important to source segregate food waste – source segregating waste streams at the kerbside results in quality, recycled products which have the greatest value • The cost of commercial fertilizers is linked to the price of oil. Using biofertilisers made from quality (source-segregated) inputs will help keep food prices down Costs and benefits of source-segregated waste collections • Excellent work has been done demonstrating that source-segregating kerbside collections not only results in better quality recycled products but also costs less to collect and treat and results in less waste overall as people are more aware of how much they are throwing away • Wasting food costs the average family with children £680 a year, or £50 a month, and has serious environmental implications too. If we all stop wasting food that could have been eaten, the CO2 impact would be the equivalent of taking 1 in 4 cars off the road. • Example from Bexley Council: Swapped from weekly refuse/fortnightly recycling in 2008 to weekly recycling (food & garden comingled and mixed recyclables). As a result, • 5,000t more went to the organic collection (food/garden waste) • 5,000t more went to mixed recyclables (plastics/metals/glass/paper/card etc) • And there was 18,000 t less waste left in their residual collection than the previous year • Overall, there was 10,000 t less waste generated than in the previous year • In terms of costs, the costs of collection were neutral but they saved £820,000 on disposal in first year and over £1m in second year • There were just 20 complaints from 220,000 residents
www.farmingmonthly.co.uk
| Energy
Becoming energetically self-sufficient – Biogas model of Zeven Built by MT-Energie Group. even, a small town with around 13.000 inhabitants in the northern part of Germany, has taken a step forward on its way to becoming energetically self-sufficient with its state of the art anaerobic digestion and gas upgrading systems. The biogas produced from maize crops, which is subsequently upgraded to natural gas quality, is a regional energy source which can be used all over the town within the existing infrastructure. Biogas is finding its way into the fuel tanks of cars, is used in combined heat and power plants to provide heat for residential estates and is offered directly to end customers as a “green natural gas mix”. Due to the low gas consumption of Zeven only a very small production of biomethane can be integrated into the local infrastructure. Usually gas upgrading systems pay off at a size of 2 MW (1000 Nm³ / h) electricity equivalent and above. The model of Zeven is supplied with a 250 Nm³/h raw gas
Z
www.farmingmonthly.co.uk
upgrading unit, which is the smallest in Germany up until this time. The amount of feedstock needed for this plant can be gathered locally and the dimensions of the plant blend into the landscape. Holger Schlüter, Managing Director of Stadtwerke Zeven GmbH (the local authority in Zeven) stated: „The Stadtwerke Zeven have realized a model project in cooperation with the company MT-Biomethan which stands out not only due to its efficiency, but also as an example for the different possibilities for using biomethane. After the feed in of the upgraded biogas into the local low-pressure grid, the gas is used in numerous places in the city. Within the area of the Stadtwerke Zeven all in all five CHPs were installed with a total capacity of 640kWel. Apart from ten private customers, the thermal energy of about 800 kW also supplies two schools and the indoor swimming pool in Zeven with heat.” The integrated technology from
biogas plant to upgrading facility has been built by the MT-Energie Group. Working in the fields of biogas since 1995 and biogas upgrading since 2007, MT,with its 600+employees worldwide, provides reliable and highly efficient plants. Due to the lowest consumption of primary energy, highest purity in biomethane and a pressureless process this small MT biogas upgrading plant can be run profitably and fits easily into the existing infrastructure. MTEnergie’s Head Offices are also located in Zeven, and the company buildings run entirely with heat and electricity provided by its own plant. MT-Energie also has a number of courtesy cars using biogas as their sole fuel. Now Zeven can rely on a local energy source whilst maintaining the added regional value. The citizens of Zeven are glad to use
these products, since they strengthen the domestic economy, safeguard local employment and disburden the need for gas imports with volatile prices. With the recent introduction of the UK government’s renewable heat incentive (RHI) and the already-existing Feed-in-Tariff (FIT), we believe that schemes like this are now both possible and profitable here in the UK. Whether your requirements may be for a self-sufficient village, or whether a cooperative of local farmers could make use of both the technology and incentives, we would be happy to discuss your ideas with you and help you realize your plans for energy self-sufficiency. Please contact angela.hardy@mt-energie.co.uk , andrew.williams@mt-energie.co.uk , or emanuel.bregulla@mtbiomethan.com for further details.
March 2012 | Farming Monthly | 35
| Energy
36 | Farming Monthly | March 2012
www.farmingmonthly.co.uk
| Energy
Secure storage of energy feedstock Biomass in silage bags. n recent years, there has been an increasing trend to conserve silage fodder in silage bags (or AgBags). This same storage method is now being used for the storage of biomass, prior to the production of biogas – and also after digestion, prior to spreading to land. By moving away from fixed storage structures, a flexible storage system allows the use of different forages (e.g. corn silage; bovine slurry, moist grain, press pulp, etc.) as well as the ability to change the basic parameters. Air is excluded at a very early stage when using the AgBag system, which results in high quality feedstock and very low losses of material. In cases where the cost of the forage is high, the low losses in the AgBag contribute to an overall reduction in costs. Bagging before digestion (or bio-drying) actually dries and conserves the nutrients - biomass will burn more efficiently if allowed to dry. Using a patented aeration system, the air in the AgBag is effectively controlled to ensure the quality of the stored material. This also has the added advantage of eliminating odour problems, as aerated materials do not smell.
I
www.farmingmonthly.co.uk
The AgBag machine consists of 3 functional components – the feed table; the rotor and the tunnel with bag attachment. The pressure for compaction is indirectly created through the continuous input of the harvest material through the rotor into the bag, against the machine’s breaking system. One person is required to operate the machine – a rear and load truck or trailer is required for filling the machine. After the bags have been filled, they are immediately sealed and covered with protection nets. There is no need to cover with plastic film or weighing down with sandbags or tyres, as with a conventional silo. The quality of biomass stored in AgBags has been found to be very high. The reasons for low level losses during the fermentation process, are due to the rate at which the AgBags are filled and the total sealing of the contents during the storage period. When managing a biomass digester, flexibility is of the utmost importance. Prices for substrates influence the decision for the particular raw materials. Biogas plants that are fed with grain have to be changed over due to the developments in the grain market and the consequential high prices for grain. Sugar sector regulations and the high yield of gas from sugar beets, increase the demand for technical solutions for conserving ‘biogas-beet’. New findings in biogas generation are being made all the time, which also influences the choice of substrates, too. AgBagging after digestion ensures the nutrients are conserved and also conditions the material before spreading it to land. AgBagging makes the material more spreadable and it can easily be stored in preparation for seasonal requirements – the material may not be able to be spread all year round due to nitrate
regulations, for example. When spreading an anaerobic digestate (i.e. one used to lack of oxygen) to the soil, it is not as effective as putting an aerobic digestate to soil – another advantage of the AgBag System. The AgBag flexible storage system is suitable for all types of feedstock – and so a high degree of efficiency is offered. Whether you’re considering building a silo plant for biomass storage or for bio-drying, it’s well worth considering the method of ensiling in AgBags as a more effective solution. The UK provider of AgBag is ‘AB Systems (UK) Ltd’, directed by David Wynne. David has over 24 years’ experience of the AgBag storage system, which can also used as an in-vessel composting method. For more information, give us a call on 01363-82677, or take a look at our website at www.agbag.co.uk
March 2012 | Farming Monthly | 37
| Energy
World first for full scale autoclaving with wet AD The facility should be fully operational in April 2013 and will bring big benefits in terms of diverting waste from landfill, reducing greenhouse gas emissions, generating green energy and producing a high quality soil improver. sustainable waste treatment facility near Plymouth in Devon is set to become the first in the world to apply full scale autoclave processing to wet advanced anaerobic digestion (AD). Handling up to 75,000 tonnes of municipal and commercial / industrial waste per year, state-ofthe-art technology will make the AD process up to four times faster than conventional systems. Biogas production rates will also be significantly enhanced, enabling the facility to generate up to 3.2MW of renewable electricity and to export around 26,000MWh per year to the national grid. Up to 20,000 tonnes of CO2 emissions will be saved annually, while nutrient-rich digestate will also be produced for use as a soil conditioner in restoration works at a china clay works on the same site. Engineering and environmental consultancy Wardell Armstrong played a key role in helping to secure planning permission, and worked with the operator to put safeguards in place to protect the public and the environment. The £15 million Lee Moor facility is being developed at the Imerys Minerals china clay works by AAD (South West) Limited, an Aero Thermal Group company. Their innovative autoclave processing technology upstream of the AD plant will employ high temperatures (160oC) and pressures to break down lignin and cellulose structures within paper, packaging, cardboard and woody plant wastes, making them suitable for anaerobic digestion. This means that totally unsorted municipal ‘black bag’ wastes and high organic fraction supermarket and kitchen food waste can be processed simultaneously at the site, at a faster rate than normal and with more renewable energy being produced from a given amount of waste. Materials removed after autoclaving and at the screening stage, such as metals, plastics, glass and textiles, are also effectively cleaned and sterilised, improving the quality of these recyclates.
A
The Lee Moor facility will incorporate a high level of site controls, process technology and abatement equipment to ensure that both the public and the environment are protected. These played a key part in the planning application and supporting environmental impact assessment prepared by Wardell Armstrong which helped to secure planning permission from Devon County Council on 30 November 2011. Areas assessed in detail included land use and soils, hydrology and hydrogeology, traffic and access, air quality, noise, ecology and wildlife, landscape and visual impacts, and socio-economic effects. Detailed air dispersion modelling was carried out to assess any potential impacts from the site on residential dwellings, local businesses, surrounding land and nature sites. Using the latest version of AERMOD, a quantitative model based on the Gaussian theory of plume dispersion, the methodology took in a range of input data including the characteristics of the release (rate, temperature, velocity, height, location), the terrain, meteorological data and the locations of buildings and tanks adjacent to the proposed emission points. It then predicted the concentration of substances in the air, as well as the long term mean and short term peak ground level concentrations over the modelled
38 | Farming Monthly | March 2012
area. Gases such as oxides of nitrogen, sulphur dioxide, carbon monoxide, particulates, ammonia and odour were included. The modelling was reviewed in detail by the local authority, Environment Agency and Natural England. It showed that emissions will easily meet all statutory air quality standards, and that deposition rates on nature sites of less than 1% of target levels will have no significant impact on the environment. The noise assessment included continuous surveys over four days to assess the existing background day and night time noise levels in the vicinity of the site. Computer modelling using SoundPLAN was then undertaken to predict the noise levels at local residential dwellings likely to be generated by the operational activities (including traffic movements) associated with the new facility. The modelling demonstrated that the noise levels likely to be generated by the site during the daytime, night time, weekdays and weekends are less than background. Noise levels from the site at all residential dwellings will be very low and less than 35dB(A). The water quality assessment studied the impact of potential water discharges from the site on the nearby Wotter Brook. Water is used in the AD process, but will largely be treated and reused. As any excess may need to be discharged to the Wotter Brook, it
will be treated in an advanced dissolved air flotation and biomembrane system to produce a clean and high quality water that’s suitable for discharge to this surface watercourse. “Extensive air dispersion modelling, noise calculations, water quality assessments and risk assessments have all combined to ensure that the highest standards of waste management technology and strict controls will be used to ensure that there is no harm to the public or the environment” said Wardell Armstrong associate director Stephen Barnes. The consultancy also prepared the environmental permit application which is currently being determined by the Environment Agency. Unlocking potential The Lee Moor facility will be made up of two autoclave plants, screening and separation equipment, anaerobic digestion plant with associated buffer and digestate storage tanks, dewatering plant and a combined heat and power (CHP) plant. The two autoclaves will operate in parallel, each treating mixed municipal wastes in ten tonne batches at temperatures of approximately 160oC for 45 minutes at a pressure of seven bar. After being autoclaved, the waste will then be conveyed to screening equipment to separate the organic and inorganic fractions. Metals and other inorganics will be removed for recycling, while the organic fraction will be transferred to the AD plant for biogas and digestate production. The biogas will be combusted in the CHP plant to produce up to 3.2MW of renewable electricity and 3.8MW of heat. The electricity will be exported to the national grid, while the heat will be passed to a boiler to raise steam for use in the autoclaves and to provide heat for
www.farmingmonthly.co.uk
| Energy the AD tanks. The technology enables the steam to be recycled between the two autoclaves, significantly reducing the amount of energy needed by the system. The digestate will be dewatered in a centrifuge plant to approximately 25% dry solids. It will then be used in the restoration scheme for the Lee Moor china clay pits which are located nearby. This will reduce the need to import restoration materials from other facilities which might be located significant distances away, further reducing costs and environmental impact. As a stabilised and sanitised organic rich soil conditioner and fertiliser, the digestate will contain nutrients such as nitrogen, potassium and phosphorus that are essential for plant growth. A large proportion of these nutrients will be held in organic form and released slowly over a number of years as the material breaks down. This will allow for better synchronisation with the demands of plants than is normally possible
with inorganic nutrient fertilisers. Applying the digestate will also improve soil structure and water retention capacity, encouraging the growth of grassland and other plants used in the restoration scheme. The autoclaves and screening equipment will be located in enclosed buildings, fitted with fast action doors and surrounding air curtains to prevent any fugitive emissions of odour. Air within the buildings will be drawn by extraction fans through sealed pipes to odour control equipment consisting of a high tech scrubber and a biofilter. The air will be cleaned and discharged to atmosphere via a dedicated stack. Waste will be tipped, stored and treated entirely in enclosed buildings and tanks. Emissions from the odour control stacks and the CHP plant will meet strict emission standards set and regulated by the Environment Agency. Once fully operational in April 2013, the Lee Moor advanced
anaerobic digestion facility will bring big benefits in terms of diverting waste from landfill, reducing greenhouse gas emissions, generating green energy and producing a high quality soil improver. “It will unlock both the energy and fertilising potential of municipal solid waste,” said Tristan Lloyd-Baker, managing director of AAD (South
West) Ltd. “With enhanced recycling rates and increased renewable electricity production it will pioneer commercial scale autoclaving to AD or advanced AD and launch it into the 21st century. The local production of significant quantities of ‘compost’ will also significantly speed up the restoration of Dartmoor’s china clay quarries.”
Solar remains attractive proposition for rural businesses So says James Cowper, accountants & business advisors. he Government last month announced changes to the renewable energy Feed-in Tariff (FiT) scheme designed to bring “greater predictability and transparency” to investors. Rural businesses and those with multiple photovoltaic, or solar, installations, such as farms, should welcome the proposed changes, says accountants and business advisers James Cowper, as the energy savings, payback time and resulting profits continue to remain an attractive investment platform. The changes include: • A new tariff of 21p/kWh is proposed from 1 April this year for domestic sized solar installations, rather than the 43p/kWh currently on offer. The new tariff will apply to all new schemes certified from 3 March. • Those installing solar on or after 1 April will be required to have an energy efficiency rating of ‘D’, rather than the previously anticipated ‘C’ rating. • A multiple installation tariff at 80% of standard tariffs will be introduced for photovoltaic schemes for those already receiving FiT for existing schemes. However, the threshold for multiple installations has increased from more than 1 installation to 25 or
T
www.farmingmonthly.co.uk
more. Fiona Hawkins, a senior manager with James Cowper said: “These changes are being introduced to, amongst other things, create predictability for investors. The Government believes that installation costs are falling and the high FiT rate available to investors is no longer sustainable.” Despite the cut of 50 per cent in the FiT rate, investors can still see returns equivalent to a compound interest rate of almost 5.5 per cent, as illustrated by the following example. A farmer installs a 49.95kWp system certified from 3 March at a cost of £110,000. A total of 40 per cent of electricity generated is used by the farm. The FiT farm scale reduction for a 10-50kW scheme will fall from 32.9p/kWh to 15.2p/kWh. In its first year, the farmer will receive a FiT income of £6,455, together with £790 from exporting energy. The farmer makes a saving of £2,463 on his energy bill, making a total benefit to the farm of £9,708. The total payback time is just over eight years, and over a 25 year period the farm will make a total profit of £387,000. Fiona adds: “If that same farmer were to invest the £110,000 for 25
years with a compound interest rate of three per cent, he would receive a return of just £120,000. To achieve a return similar to that outlined in our example, the farmer would need a compound interest rate of almost 5.5 per cent.” At the same time, the Government has also announced a consultation on a programme of six-monthly tariff reductions for solar PV and reducing the long-
term cost of supporting tariffs from 25 to 20 years. Fiona adds: “Obviously, the actual return and payback will vary depending on the type of panels, their location and orientation. Anyone considering solar energy schemes, or any other renewable energy generation scheme, should first seek independent advice on costs and payback times.”
March 2012 | Farming Monthly | 39
| Energy
The future of Solar Power in the UK. Solar Power Intl are a one stop shop for all your solar energy requirements. olar Power Intl Ltd was established back in 2003 thanks to a breakthrough in PV technology that allows us as system designers to provide our customers with the most efficient and cost effective solar energy systems. While most of our work took place in the sunniest parts of North Africa and the Mediterranean coastline, we can see now an exciting future for solar PV in the UK thanks to the feed-in tariff scheme which make an investment in solar PV not only an environmentally viable option but an exciting financial investment as well. Solar Power Intl is dedicated to highly efficient and cost effective design. With first class EPC services we supply, install and integrate all kind of solar energy systems. As an MCS (Micro-generation Certification Scheme) accredited company and as members of the REA (Renewable Energy Association) we are fully qualified to provide our customers with the highest quality customer service along with the highest efficiency Solar PV installations in the UK. Solar Power Intl. provides its customers with a close support service, a choice of solutions, as well as consultancy and training services. The systems that Solar Power Intl installs are individually designed to be most efficient, costeffective and reliable and are all composed using the finest components which are consistently tested under high quality
S
40 | Farming Monthly | March 2012
standards. Solar Power Intl. solar photovoltaic products and services: • Domestic and Commercial grid-connected Solar photovoltaic (PV) system installations • Solar Power for telecommunication systems • Stand-alone solar PV systems for rural electrification • Solar modules of all types and sizes
• DC-AC inverters for stand-alone and gridconnected Solar PV systems For more information about generating your own solar electricity telephone 01300 345668, or contact us online at www.solarpowerintl.co.uk and we will answer your questions as soon as we can.
www.farmingmonthly.co.uk
| Pigs
New £459,000 research projects bring precision pig farming a stage nearer Two year study commences. n initiative started in 2009 to help pig farmers improve their performance, using developments in IT and monitoring expertise, has come to fruition with the simultaneous launch of two major projects with a total funding of £459,000. The first, called PIVIT Yorkshire (Pig Improvement via Information Technology), involves 12 production sites in Yorkshire and is 50 per cent funded by Defra and the EU through the Rural Enterprise Investment Programme. The rest of the funding is being provided by the producers involved. Supported by BPEX, NPA and Wm Morrison Supermarkets and managed by Reading-based farm energy specialists, Farmex Ltd, the aim is to find out how producers and stock-people can gain commercial advantage from remote monitoring of production sites. The project is scheduled to take place over a two-year period with quarterly reports to a management committee. The farms and farming
A
Thompson’s Tip:
Legacy of farrowing house scour cour in farrowing houses is well recognised. Perhaps what is less recognised is how much effect this can have on the post-weaning performance, says Paul Thompson, veterinary consultant to pig-breeding company, ACMC. It has been reported that the gut damage (villous atrophy) in piglets following rotavirus infection can persist for up to 30 days. This would result in reduced nutrient absorption by the pigs long after they are deemed to have recovered. This emphasises the need to look at performance preweaning when assessing poor pig performance after weaning.
S
www.farmingmonthly.co.uk
organisations involved are Yorkwold Pigpro, Driffield; J C Lister (Farms) Ltd, Boroughbridge; T A & J B Stephenson, York; Middlecave Ltd, Richmond and Melrose Pigs Ltd, York. “The objective is to focus on the people involved and find out how commercial advantage can be routinely gained from remote monitoring of production sites using existing tools and knowledge. This will be achieved by a combination of training, knowledge transfer and technical support,” commented Farmex managing director Hugh Crabtree. The second project under the TSB-SPP (Technology Strategy Board — Sustainable Protein Production) programme, aims, over a three-year period, to develop new IT tools to automate data analysis and simplify access to it. This is 50 per cent sponsored by the Technology Strategy Board with the remaining funding coming from consortium partners, Farmex Ltd, Dicam Technology Ltd of Halesworth, Suffolk, and ARM Buildings Ltd, Rugeley, Staffordshire. Newcastle University will provide data analysis through its Industrial Statistics Research Unit ARM Buildings, which already provides free monitoring systems in its new buildings, will provide a stream of data from practical pig units and Tim Miller ARM’s environment specialist will act as on-farm coordinator. Again, Farmex will be managing this project.
Over ten years Farmex has developed sophisticated and world-leading control and monitoring systems for piggeries and crop stores. Sensors are used to monitor vital factors, such as temperature, electricity, water and feed usage, and can transmit information to a farm’s computer for analysis on a 24-hour basis. Not only does the farmer have advanced warning if something is going wrong, work in the United States has shown that the information can actually be used to predict impending disease issues. UK monitoring has already seen energy savings worth thousands of pounds on many farms. However, it is felt that the average farm with monitoring equipment doesn’t exploit the financial and management benefits to their full potential. “Modern IT systems offer great potential to benefit animal performance and welfare by realtime data collection, timely alerts of day-to-day husbandry problems and focussed reports to aid more strategic management decisions.
These two projects will allow practical systems to be further developed and their value to the pig farmer to be clearly demonstrated,” said Sandra Edwards, Professor of Agriculture at Newcastle University and a member of the PIVIT Initiative team.
The project is scheduled to take place over a two-year period with quarterly reports to a management committee. “The availability of broadband internet access in rural areas means that production sites can be permanently on-line. New software tools, which the project will develop will allow rapid processing and feedback of digestible information to individual units,” commented Hugh Crabtree. “While there is no formal dependency between these projects, it is really exciting that we have the opportunity to run them concurrently as they are so closely related,” he added.
March 2012 | Farming Monthly | 41
| Fuels
AdBlue, helping to ensure a greener future Reducing nitrogen oxides from diesel exhaust emissions is an important step to a better environment. hat is AdBlue ? AdBlue is a high quality urea solution, and is the registered trademark for AUS32, or Aqueous Urea Solution 32.5% that is used with the Selective Catalytic Reduction system (SCR) to reduce emissions of oxides of nitrogen (NOx) from the exhaust gases of diesel engines. AdBlue is a 32.5% solution of high-purity urea in demineralized water that is clear, non-toxic and safe to handle. It is non explosive, non flammable nor harmful to the environment. AdBlue is classified under the minimum risk category of transportable fluids. It is not a fuel, nor a fuel additive and needs to be used in a dedicated tank in your tractor or combine. It is replenished in a similar way to refuelling diesel. Should you spill AdBlue on your hands, simply wash it off with water. How much AdBlue do I need ? Average consumption of AdBlue is generally 5% or less of diesel use, depending upon the workload of the engine, so you will need to
W
fill up much less for AdBlue then you do for diesel. You will use as a maximum about 5 litres of AdBlue to every 100 litres of diesel, and achieve efficiency savings in fuel economy that more than offset the additional purchase cost of the AdBlue. How should I store AdBlue ? AdBlue can be stored for 1 year if this is done in a correct manner i.e. away from direct sunlight. It needs to be protected from too warm or too cold temperatures. Its freezing point is at -11 degrees Celsius. When it thaws thoroughly, the product will retain its initial quality. It should be stored in a sealed package and in a well ventilated storage area. Why should I choose SCR with AdBlue over other technologies ? AdBlue combined with SCR offers you a fuel efficient solution, with lower CO2 emissions then competitive solutions. All major European and North American lorry manufacturers currently offer SCR equipped models. The future Euro VI emission standard is set to
42 | Farming Monthly | March 2012
reinforce the demand for this technology in the United Kingdom. Why does AdBlue quality matter ? Various actions can affect the quality of AdBlue. To prevent contamination, it is imperative that foreign matters do not come into contact with the solution. Using contaminated AdBlue can lead to expensive catalyst replacement costs. The AdBlue trademark is currently held by the German Association of the Automobile Industry (VDA), who ensure quality standards are maintained in accordance with ISO 22241 specifications. Ensure that you only buy a reagent for your tractor or combine that bears the name AdBlue with the registered trademark (速) on the product label. Buying AdBlue from Air1 UK is a guarantee of the correct specification required for use with your SCR technology. What is SCR technology for tractors & combines ? SCR stands for an after treatment technology called Selective Catalytic Reduction. This
technology requires the use of a reagent called AUS 32 (also known as AdBlue) to reduce the NOx. Almost all major heavy-duty vehicles manufacturers have decided to use this technology to meet the new emission legislation on NOx emissions. Competitive technologies offer a less beneficial fuel efficiency and higher CO2 emissions. So SCR is the most cost effective solution to meet NOx emission standards. The main components of the SCR system are the SCR catalyst, the AdBlue injection unit, the AdBlue tank and the AdBlue dosing control unit. AdBlue is injected into the exhaust pipe, in front of the SCR catalyst, downstream of the engine. Heated in the exhaust it decomposes into ammonia and CO2. When the NOx reacts inside the catalyst with the ammonia, the harmful NOx molecules in the exhaust are converted to harmless nitrogen and water.
www.farmingmonthly.co.uk
| Fuels
AdBlue is not a fuel but does require a specialist storage solution Standard plastic tanks, pumps, hoses and seals are not suitable for this type of urea solution. dBlue is fast becoming part of everyday life for many in the farming community as a number of tractor and combine manufacturers adopt the SCR (Selective Catalytic Reduction) technology to reduce NOx and meet current emissions standards. Manufacturers include: New Holland, Claas, Massey Ferguson and McCormick. It seems that most tractor manufacturers have elected to use the SCR rather than EGR (Exhaust Gas Recirculation) technology. SCR systems are being fitted to new vehicles and require the addition of AdBlue (a Urea solution). This is held in a separate small tank on the tractor or combine and injected into the exhaust pipe ahead of the SCR catalyst. The tank needs refilling as you use diesel. Usage depends on individual systems but between 4 and 5% of diesel usage is normal. Going to the local garage to fill up or, even buying AdBlue in small containers,
A
www.farmingmonthly.co.uk
is not the answer as it is inconvenient and expensive. It is far better to store AdBlue centrally on the farm and use a dedicated portable dispensing tank to top up out in the fields. One company, with many years’ experience supplying fuel and oil tanks and has recently launched and AdBlue range, is Bundedtanks.com (www.bundedtanks.com). Whilst they supply “blue” plastic dispensing tanks from the major manufacturers, they are ever aware of the high cost of such products at present. Ordinary plastic tanks and dispensing pumps, hoses and nozzles cannot be used with AdBlue as they are not compatible with the solution. Stainless steel nozzles and fittings are necessary, as are pumps with special seals, suitable hoses and so on. AdBlue does not, however, have to be stored in a bunded tank (it is not a fuel). The most cost-effective solution is to store the AdBlue in a 1000
litre IBC (Intermediate Bulk Container) and attach a dedicated pump set to fill up your portable dispenser. Whilst a number of companies are to be found selling suitable pumps and hoses, Bundedtanks.com also has stocks of refurbished IBC’s and so can supply a complete AdBlue storage and dispensing system. On offer right now is their AdBlue IBC plus pump kit package deal – Basic. This offers a refurbished and labelled IBC together with a Piusi Basic AdBlue pump kit at a very competitive price of £399 plus VAT delivered to you. (UK mainland). To go with your IBC and pump kit why not go for one of the new CEMO Blue Mobile Easy portable, battery powered dispensing tanks. Sizes available right now are 125,
200 and 430 litres with prices starting at £735 plus VAT delivered. Check out prices - a CEMO unit plus an IBC and Pump package are much cheaper than one 1400 AdBlue dispensing tank!
March 2012 | Farming Monthly | 43
| Fencing
There’s no escaping Hampton Steel ! Proud Sponsors of the English National Sheep Dog Trials. ampton’s manufacture a wide range of wire fencing products for farmers, supported by competitive prices and excellent customer service. Centrally located in Wellingborough, Northamptonshire their extensive list of products includes, hinge joint fencing, mild steel and high tensile barbed wire, line wires and staples, chain link fencing, hexagonal wire netting and their new, extremely strong, versatile and user specifiable, fixed knot fencing system, XNET™. Featuring a smooth animal and fleece friendly X shaped knotted joint, XNET™’s wires are locked tight to provide a superior fence with superior strength. An optional hinged lower or upper section is a simple addition to the configuration. For example, this means the fence can easily be angled out at the hinge thereby inhibiting access by burrowing or scaling animals. The advanced technology of the design makes the high tensile XNET™ almost self-supporting requiring fewer posts, making it easier to erect. Hampton’s manufacture the longer, labour saving and more cost effective, 500m rolls of hinge joint and XNET™ stock fence and up to 2000m rolls of high tensile barbed wire. ‘We recognised the potential for the larger 500m rolls and this has been confirmed by the increased demand in the market and positive feedback from our customers. These larger rolls provide not only valuable cost savings but, improved levels of efficiency and the quality our
H
44 | Farming Monthly | March 2012
customers deserve. It is these high standards of product specification combined with total customer satisfaction that underpin our business and provide the benchmarks by which we operate’ Said Peter Matten, General Sales Manager, Hampton Steel UK manufacturer. The English National Sheep Dog trials, 2nd to 5th August near Lancaster will see Hampton’s XNET™ stock fence 8/80/15 coupled with their line wires providing the enclosures for the trials. ‘We are extremely
proud to be asked to support the internationally renowned English Sheep Dog Trials. XNET™ was launched last year and orders have far exceeded our expectations. Its versatility is quite staggering. It’s now a case of ‘tell us what you want’ and we’ll make it,’ said Mark Johnson, Managing Director of Hampton Steel Ltd. ‘This breaks the mold and sets new boundaries. No longer do our customers, or we, have to conform to fixed patterns. It truly is a revolutionary way of producing fencing.’
www.farmingmonthly.co.uk
| Fencing
Become a selected merchant for Patura Electric Fencing in the UK Birkdale is looking to create a network of dealerships. 4th February 2012; Uxbridge, Middx, UK. British gate and fencing accessories specialist, Birkdale, recently won exclusive rights to distribute the Patura range of electric fencing here in the UK and Ireland... and the company is now inviting applications from interested merchants. Selling exclusively via the trade, never direct to end-users, Birkdale is looking to create a network of dealerships giving complete coverage of the UK and Ireland; in return, the company guarantees selected specialist dealers full onsite training, a dedicated telephone technical help desk, bonus and incentive programmes and loyalty rewards. Offering an ex-stock service, with comprehensive availability and next day delivery nationwide on most orders, Birkdale’s Patura stockholding here in the UK
2
covers the complete range of temporary and permanent electric fencing; with standard wire, tape or rope variants, electric netting options and mains, battery or solar powered energisers; plus a wide range of fixtures, fittings and accessories for customising, installing and managing the systems in-situ. Already well-known across Continental Europe, Patura products are proven to be efficient and effective for controlling both domestic and wild animals in a wide variety of applications and settings. “We’re delighted to be adding Patura products to our range”, said Birkdale MD, John Abernethie. “The company has a reputation for quality, expertise and attention to detail which matches our own ethos well”. Birkdale: T 0845 450 9000; www.birkdalesales.com
Time to mend fences! KiwiKit offers one-stop shopping for all quality fencing needs. he addition a year ago of quality fencing equipment from New Zealand to the extensive range already offered by family company KiwiKit has proved a runaway success with both farmers and fencing contractors. The Strainrite range of fencing tools and equipment for temporary and semi-permanent, conventional and electric fencing is highly regarded in their home market and has been welcomed, for its high quality and practicality here in the UK. The range is designed by farmers, for farmers which follows the principals of the Directors of Kiwikit. In the current financial climate in farming, many dairy farmers and also beef and sheep farmers are looking at more efficient use of grassland to reduce costs. Kiwikit directors are all strongly linked with agriculture and have a deep understanding of their market, which has been built up from
T
www.farmingmonthly.co.uk
sourcing good quality realistically priced New Zealand products such as solar, mains and battery energisers, electric fencing accessories, waterproofs and calf rearing equipment - products that really do their job. The extensive Strainrite range of tools and accessories now makes the KiwiKit range truly comprehensive for all agricultural and contractors’ fencing needs. Typical is the Ultracrimp Ezepull Fencing Tool, which is the ultimate in multifunction use for crimping the complete range of wire joining sleeves, including barbed wire, and which also provides wire cutting, staple pulling and cable insulation stripping. The New Zealand products on offer can be sourced from catalogue, by phone, email or website. Call to discuss requirements and orders or request a full catalogue of all products they supply.
March 2012 | Farming Monthly | 45
| Groundcare
Need a new all-round chain saw? STIHL introduces the new MS 231 and MS 251 chain saws. hat do you look for when choosing a new chain saw? A chain saw with the scope to manage anything from cutting firewood to thinning out small trees? Top of the list of what you should look for must be power for the job and easy efficiency in use. And that is just what you get with two new models from STIHL – the general purpose MS 231 and MS 251 chain saws are impressive allrounders and simply a pleasure to use.
W
Now is a good time to check over your power tools and get them serviced. Driven by the advanced STIHL 2-MIX engine, the new STIHL MS 231 and MS 251 models meet the latest and strict emission standards, cutting emissions by up to 70% and fuel consumption by up to 20% compared to a STIHL 2stroke engine without the 2-MIX technology. That makes them not only cleaner to run, but more costefficient too. Those are not the only benefits
of the STIHL 2-MIX engine. The engine delivers impressive performance: 2.0 kW power output from the MS 231's 40.6cc, and 2.2 kW from the MS 251 (45.6cc). And that power is translated into valuable torque, so at the working end of the chain saws they drive comfortably and effortlessly through the wood. ‘Stay sharper longer' saw chain The new MS 231 chain saw has something very special to offer. It is fitted as standard with an ultratough ‘stay sharper' saw chain called STIHL Picco Duro. Picco Duro's cutters have precisionsoldered carbide tips, so it stays sharp up to four times as long as a standard, non-carbide tipped saw chain. That not only reduces the frequency of sharpening, it makes Picco Duro a great choice for cutting ‘dirty' wood like mudcovered fallen timber or railway sleepers for example, where a standard saw chain would swiftly get blunt. No wonder Picco Duro's special teeth are coloured a winning and distinctive ‘gold'. Easy handling Typifying a STIHL chain saw, the new MS 231 and MS 251 models
are designed for simplicity and comfort in use. That makes them safer as well as more pleasant to work with. A professional standard antivibration system for example, means vibrations are low and handling comfort is high. STIHL design expertise ensures the machines are compact, ergonomic and very well balanced, and all machine functions are set in thumb's reach for easy, effortless and natural control. Special easy-to-use models Making them even easier to use, each new chain saw is also available with optional STIHL ErgoStart and Quick Chain Tensioning features. The former means the engine starts easily with a slow and gentle starter cord pull; the latter enables simple chain tensioning without the use of any tools. These special ‘comfort' models are designated MS 231 CBE and MS 251 C-BE. Minimal maintenance Another great benefit of choosing a STIHL chain saw is the extensive network of Dealers who
support its power tools. More than 500 Approved Dealers are located around the country and all are trained to service its machines as well as carrying accessories such
46 | Farming Monthly | March 2012
as protective clothing, oils, lubricants, filing tools and saw chain. On an everyday basis, the new MS 231 and MS 251 chain saws are designed and built to require minimal routine maintenance. An advanced air filter system for example, ‘precleans' the intake air before it even enters the physical filter, thus extending the time between filter cleaning and extending air filter life. When it does need cleaning, the cartridge-style air filter is simple to access, remove or replace – again typifying STIHL's focus on user-friendly design. Service reminder! If you have not already done so, now is a good time to check over your power tools and get them serviced if they are due, so you are well prepared for the season ahead. Stihl’s Approved Dealers are trained and equipped to maintain your machines, so book them in for a service before the spring rush begins. STIHL and VIKING power tools are designed for easy maintenance, yet an estimated 60% of users don’t bother. And that can cost money and time if your machine isn’t running efficiently or worse still, lets you down! A regular service
and home maintenance regime cuts fuel consumption and emissions, extends engine life and improves performance.
www.farmingmonthly.co.uk
| Forestry
New wildlife landscapes New disease identified in set high standards for native juniper trees in Upper Teesdale woodlands Further spread may be difficult to avoid.
Many benefits will ensue.
damaging plant disease that was until recently almost unknown in Britain has been confirmed in rare native juniper bushes at the Moor House-Upper Teesdale National Nature Reserve in the North Pennines of England. The disease is caused by Phytophthora austrocedrae, a fungus-like organism that infects the plant through the root system and causes the foliage to decline and eventually die. Juniper is a native conifer and a member of the Cypress (Cupressaceae) family of plants. P. austrocedrae infection was only confirmed in the UK last year on other trees from this family, at two sites in Scotland. The source of the infection is unknown: P. austrocedrae is difficult to identify because it is rare, and there is only limited information available about it. However, the Forestry Commission scientists who identified it believe
A
ew nature zones each covering thousands of hectares are to be set up across England, Environment Secretary Caroline Spelman has revealed. The 12 Nature Improvement Areas (NIAs) will each get a share of £7.5 million to create wildliferich landscapes, restore habitats and encourage local people to get involved with nature. The Forestry Commission is very pleased and impressed to see the principles supporting woodlands all in the winning NIAs. There will be no overall deforestation when creating open habitats with new woodlands created. The use of woodlands to improve water quality and managing them for wildlife habitats has vey high profile in many NIAs. Pam Warhurst, Forestry Commission Chair explained: “These are fantastic projects filled with ambition and vision. Our own Senior Ecologist was on the judging panel for the NIAs and although few of the projects
N
www.farmingmonthly.co.uk
involve major woodland programmes, he was delighted to see the excellent principles underpinning the winning proposals.” “New woodlands have the security of commitments to ongoing management which will benefit wildlife, improve water quality and produce timber or woodfuel to support the local green economy. Where trees have to be removed to restore open habitats, new woodlands will be planted and the material from the felling will be used locally for woodfuel. We hope that all landscape-scale projects in the future will adopt the same high standards.” Nature Improvement Areas were a flagship policy contained in last year’s Natural Environment White Paper ‘The Natural Choice’ which set out aims to improve the quality of the natural environment across England, halt the decline in habitats and species, and strengthen the connection between people and nature.
it can be transmitted in ground water, infected plant material and contaminated soil, making further spread very difficult to prevent. It is especially serious because juniper is quite rare in the UK. The Teesdale juniper population is the second largest in the UK and is protected as part of a Special Area of Conservation (SAC). Scientists from the Forestry Commission’s Forest Research agency are undertaking further studies to confirm how damaging it might be on juniper, Lawson cypress and other potential tree hosts. Natural England, which manages the site, is working with the Forestry Commission and the Food & Environment Research Agency (Fera) to survey the extent of the infection and consider how it might best be contained, as well as putting biosecurity measures in place for anyone working on the site
March 2012 | Farming Monthly | 47
| News
Why collect your grass? New wireless control Terminal It saves time, money - there’s no rotting grass.
Kverneland Group Introduces a New Wireless Control Terminal for Vertical Auger Mixers.
ulching is the way ahead. Mulching lawnmowers efficiently cut and re-cut grass clippings into tiny particles which are then blown deep into the turf out of sight. As a result you have no clippings to dispose of – no trips to the tip, no piles of rotting grass in your garden, just a perfect finish that’s 30% quicker. Thanks to the special design of the blade, the small pieces are pressed down into the lawn. Unlike conventional mowers which collect grass, mulching lawnmowers utilise a system that recycles the clippings as you mow, there are no more heavy grass collectors to empty, no more stop/start mowing, this saves so much time and effort it really is a pleasure to cut the lawn. What happens to the clippings? Cutting and re-cutting the blades of grass into tiny particles allows them to wilt and break down much more quickly than when mown with a single cut. A blade of grass contains more than 80% moisture, chopping it into fine particles releases this moisture almost immediately so the recycling process starts as you mow. Feed Your Lawn Grass clippings make an excellent slow release fertiliser if mulched correctly; throwing away your grass wastes valuable nutrients. If your lawn is the size of a tennis court you will collect an amazing 1¼ tons of grass every year and waste 33lbs of nitrogen, 30lbs of potash and 10lbs of phosphate. RECYCLE YOUR GRASS, IT MAKES MUCH MORE SENSE – it’s quicker too! Noise levels – something to shout about Multiclip mowers are among the quietest in the world – not only
M
friendly to the environment but also to you and your neighbours. Typically, a Multiclip has less than half the apparent noise level of a conventional petrol mower due to the technology involved in the blade and deck design. Feed the natural way Recycling your grass clippings is the easiest way to maintain healthy soil with no need for artificial fertilisers. Healthy soil is full of micro-organisms, earth worms and beneficial insects, feeding these creatures regularly with organic matter will actually improve the quality of your soil and lawn. Finely chopped grass from a Multiclip mower provides a banquet for these tiny creatures, the smaller the particles of organic matter the quicker they will be broken down and release valuable elements into the soil. Mulching mowers reduce thatch Some gardeners may be concerned about a build-up of thatch as a result of mulching their grass. The fact is properly mulching grass will reduce that build up by improving the texture and content of the soil thereby reducing disease and thatch; the result is a fuller and healthier lawn. Quick guide to better mowing To obtain the best results from a mulching mower you should leave your grass slightly longer than with a conventional mower. We recommend keeping the height of your grass to around 1½” to 2”. It will be ready to mow again at 2½” to 3” long, aim to take 1/3 off the grass length when mowing. On average you should mow your grass once a week in the spring then once every two weeks in the summer. For more information on the benefits of Lawn Mulching visit the Mulching magic website this includes lots of hints and tip on lawn mulching.
verneland Group is introducing a new Wireless Control Package for its range of trailed vertical auger mixers. All communication between the mixer and the control terminal is done via wireless communication and without the need of cables. The new solution offers the option of a second control terminal for the loading tractor, providing the operator with more control of all functions during the loading process. The new Wireless Control Terminal is a combined weighing and control system that gives you full control of all important functions, for instance during the loading process. All relevant information is shown on a large and very clear digital display. Communication between the control terminal and the computer, box fitted onto the mixer, is done
K
wireless, without the need for any cables connecting the mixer and the terminal inside the tractor cab. So no more broken cables. With the wireless control package it is possible to connect a second terminal to the new solution. You can place one terminal inside the tractor, pulling the mixer, and a second terminal inside the loading tractor. This allows the operator to control and monitor all loading activities and information from inside the loading tractor. The new terminal includes a USB interface for simple exchange of data between the terminal and your personal computer. With the optional Feeding Management Programme software you can easily manage and exchange feeding data, e.g. comparing entered feed rations with the collected data from the terminal.
SOUTHAM AGRICULTURAL SERVICES Fields Farm, Station Road, Southam CV47 2DH
Tel: 01926 813426 Fax: 01926 817908
48 | Farming Monthly | March 2012
www.farmingmonthly.co.uk
| News
Morris Corfield & Co Limited Benthall Works, Shropshire TF12 5BB Tel: 01757 249799 Newton Street, Craven Arms, Shropshire SY7 9PJ Tel: 01588 673325 Westington Works, Docklow, Leominster, Herefordshire HR6 0SJ Tel: 01885 488884 Bellard Court, Platts Lane, Duddon, Tarporley, Cheshire CW6 0EU Tel: 01829 749391
www.farmingmonthly.co.uk
Oliver Landpower Limited Home Park Works, Kings Langley, Hertfordshire WD4 8LW Tel: 01923 265211
Nigel Quinn (AMS) Limited 89 The Marshes Lane, Mere Brow, Preston, Lancashire PR4 6JR Tel/Fax: 01704 822272 Mobile: 07973 519491
A14 Telford Road, Bicester, Oxfordshire OX26 4LD Tel: 01869 329988
Wilfred Scruton Limited Maxwell House, Riccall Grange, King Rudding Lane, Riccall, York YO19 6QL Tel: 01757 249799
Wandon End, Luton, Bedfordshire LU2 8NY Tel: 01582 727111
Providence Foundry, Foxholes, Driffield E.Yorkshire YO25 3QQ Tel: 01262 470221
March 2012 | Farming Monthly | 49
| Machinery
Same Deutz-Fahr announces two more major dealer appointments Manufacturer hoping to attract more quality dealers for brand growth. wo more major dealerships have now been appointed by Same Deutz-Fahr to market the DeutzFahr tractor range – West Mid Tractors, which has its premises at
T
Montford Bridge, Shrewsbury, and Uphill and Son based at Chewton Mendip, Somerset. The announcement comes only weeks after news that Somersetbased Bigwood and Partners and
New Seed drill monitor Provides early warning of blockages. new electronic monitoring system for detecting blockages in pneumatic drills was featured by Kuhn Farm Machinery at Lamma 2012. The KLS 128 pneumatic seed drill flow monitor, which incorporates sensors in each pipe between the distribution head and the coulters, is designed to detect and identify even partial blockages in any of the distribution pipes.
A
The system, which alerts the tractor driver of any blockage through a cab alarm facility, provides peace of mind and minimises any consequent cropping deficiencies. The KLS 128 can be fitted to many of Kuhn’s pneumatic seed drills, including models in the Venta, Moduliner and Speedliner ranges.
Anker of Coates Coates Mill, Coates, Peterborough, PE7 2BW Tel: 01733 840777 Units 15-17, Brook Far, Ellington, Huntingdon PE28 0AE Tel: 01480 890990 www.ankerofcoates.com forage harvesting I livestock husbandry I arable I landscape maintenance
be strong, be KUHN
Hayward United Farmers Ltd
Custom built drilling
Rapid and economic drilling
Heliport Site, Ellough, Beccles, Suffolk NR34 7XD Tel: 01502 475111 www.hufl.co.uk forage harvesting I livestock husbandry I arable I landscape maintenance
be strong, be KUHN
Cumbria’s Taylor & Braithwaite are to also market the Deutz-Fahr tractor range. Same Deutz-Fahr’s CEO, Mark Casement comments he is delighted to welcome two more, well-established dealers to SDF’s network and wishes them every success in the coming years. “While we already offer highperforming, reliable and economical products, we will also bring many new tractor, combine and machinery products to the market over the next year and beyond,” he says. “We have the products to compete strongly with any other brand, so it is important we continue to grow a dealer network in the UK and give customers the chance to experience these products for themselves.” He adds that there are opportunities in many parts of the country where there is yet to be adequate dealer coverage and the aim is to attract more quality dealers to support Same DeutzFahr’s growth plans. Uphill and Son Based at Chewton Mendip, Somerset, Uphill and Son has been involved in the agricultural machinery business for more years than its Managing Director, Robert Uphill, cares to remember. “I’m the seventh generation,” he says. “And the business has been on the same site since it was started all those years ago.” News then that this established company is to market the DeutzFahr tractor range has been well received, not only by its customers but also by its staff. “The Deutz-Fahr tractor range is vast – not only in the broad power band the models provide but also in the increasing number of tractors available with continuously variable transmissions,” he says. “We cover the mid and north Somerset, south Gloucestershire
and west Wiltshire area where there are as many livestock farms as there are arable units. DeutzFahr has tractors to meet all our customers’ needs.” He adds that the use of Deutz engines, the modern styling of the tractors and their undoubted reliability have been major factors in his decision making. West Mid Tractors Taking on the Deutz-Fahr franchise is West Mid Tractors based at Montford Bridge, Shrewsbury. According to dealer principal Nigel Huntbach, the Deutz-Fahr tractor range, with its broad power spectrum from 65hp to 275hp, is ideal for their customers who farm in the Shropshire and Staffordshire area they cover. “The farming is very mixed in this area,” he says. “There are large scale arable enterprises as there are small scale livestock farms – and vice versa.” He adds that with Deutz-Fahr also offering an ever larger number of tractors with continuously variable transmissions – the TTV models – this too will help to meet the needs of his company’s customers. “Powered by Deutz engines these tractors clearly offer a level of reliability which is the envy of the industry,” he says. “And for operators, the high degree of comfort the cabs offer make the tractors a delight to drive.” Mr Huntbach comments that the feedback from his customers regarding the new Deutz-Fahr franchise has been very positive. “We are confident that the quality of the tractors, their reliability and the large number of models and transmission options will find favour with our customers and meet their requirements well,” he says. “Like West Mid Tractors, DeutzFahr has many years of experience in the agricultural machinery business and together we make a good team.”
Craggs of Conder Green Thurnam Mill Buildings, Conder Green Lancaster LA2 0BD Tel: 01524 741405 www.craggsofcondergreen.co.uk
forage harvesting I livestock husbandry I arable I landscape maintenance
be strong, be KUHN
K O Machines
Harvesting reliability
Make the best start to your grass harvest!
Lower Laches Farm, Slade Heath Nr Wolverhampton WV10 7PA www.komachines.co.uk
forage harvesting I livestock husbandry I arable I landscape maintenance
be strong, be KUHN
50 | Farming Monthly | March 2012
www.farmingmonthly.co.uk
| News
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 51
| Machinery
Kubota Mowers Cut Down Maintenance Time Kubota ride-on mowers make maintaining school playing fields child’s play for contractors Lawns2Mow. he company, which is based in Shipston-onStour, Warwickshire, added two Kubota ride-on mowers, an F2880 and a GR2100II, to its fleet last year to help make light work of large turf maintenance jobs. Founded in 2006, Lawns2Mow employs two full time and two part time employees to undertake a wide variety of work from cutting private lawns and mowing grass verges to maintaining school playing fields. The company had used another manufacturer’s machines, but when its largest ride-on mower was stolen, local dealer Sims Garden Machinery in Stratford-upon-Avon, recommended the Kubota F2880, part of the F Series Professional Outfront Mowers.
T
“ What sets it apart from the competition, is its Glide Steer technology, which allows the machine to turn more sharply than a conventional mower. ” Impressed with the F2880’s ability to mow large areas with ease, together with its value for money, Lawns2Mow owner, Dave Faulkner was quick to purchase the machine. He said: “As far as I’m concerned, it’s the bee’s knees. It can cover large areas in very short space of time and
because it’s a diesel, the fuel economy is excellent – it can run all day.” Designed with groundsmen and greenkeepers in mind, the F2880 is fitted with four wheel drive (4WD) as standard and an impressive 28HP diesel engine. It also benefits from power steering, hydraulic mower lift, shaft driven mower and transmission. For maximum durability and power delivery, power to the outfront deck is transmitted via shaft drive and the heavy duty tworange hydrostatic transmission system gives infinitely variable speeds up to 20km/h forward and 11km/h in reverse. What’s more, the Auto Assist 4WD works in both forward and reverse directions. This allows the rear wheels to free-wheel when turning, reducing the turning circle and minimise scuffing of the turf, and then returns the machine to 4WD when not turning to provide optimum grip. “I needed something strong, reliable and quick – and the F2880 has proved to be just that. It offers excellent straight line pace and because it’s road legal, we can simply drive it from one job to the next.” And after seeing so many of his school customers being forced to close because of snow and ice this winter, Dave is now considering purchasing a snow plough attachment for the F2880. This would allow the company to clear paths and playgrounds quickly
52 | Farming Monthly | March 2012
and efficiently so that schools could remain open. “Obviously for a contractor, turf maintenance is a seasonal business, so investing in a snow plough will increase its versatility and allow us to offer an additional service to our customers.” Pleased with the F2880, Dave quickly purchased a second Kubota machine, the GR2100-II Diesel Garden Mower. Specifically designed for heavy duty use, it features Kubota’s latest generation diesel engine and direct grass collection and easy dump system, as well as power steering and a hydraulic deck lift. But what sets it apart from the competition, is its Glide Steer technology, which allows the machine to turn more sharply than a conventional mower. As a result, the front tyres can turn upto 70 degrees, whilst the inner rear wheel is disengaged allowing it to run freely to eliminate turf damage. Once the wheels are straight again, the all-wheel drive is reengaged to provide traction. Servicing, maintenance and repairs are all provided by Sims, though as Dave explains, he’s not has any call for repair work yet. He said: “I’ve not had a single problem with the Kubota machines. Other mowers break down all the time, so you lose money both in repairs and down time, but with Kubota I can just turn the key and get on with my work. Without a doubt, I’d definitely recommend Kubota.”
Kubota provides a marketleading range of compact tractors and ride-on mowers, together with its class-leading RTV900 all-terrain utility vehicle and is the global leader in the sub 50hp tractor sector. Their machines have a legendary reputation for quality, performance, reliability, ease of operation and outstanding valuefor-money and a national network of Kubota tractor and groundcare dealers, such as TNS, provides the highest standards of advice and aftersales service.
“Impressed with the F2880’s ability to mow large areas with ease, together with its value for money, Lawns2Mow owner, Dave Faulkner was quick to purchase the machine.” For more information about Kubota’s market leading compact tractors, ride-on mowers, and their class-leading RTV900 all-terrain utility vehicle, together with details of your local dealer, contact Kubota Tractor & Groundcare Division Tel: 0800 023 1111/ROI: 1 800 848 000 Email: sales@kubota.co.uk or visit www.kubota.co.uk
www.farmingmonthly.co.uk
| News
Anker Of Coates Eldernell Lane, Coates, Peterborough PE7 2DD T: 01733 840777
Units 15-17, Brook Farm, Ellington, Huntingdon PE28 0AE T: 01480 890990 www.ankerofcoates.co.uk
www.farmingmonthly.co.uk
Bredy Agricentre (Dorset) Limited Louds Mill, St Georges Road, Dorchester DT1 1PH Tel: 01305 267151 www.bredy.co.uk
Ravenhill
Sharnford Tractors Ltd
Lodge Farm, Broughton Road, Frolesworth, Lutterworth Leicestershire,LE17 5EH Tel: 01455 209300 www.manitou.co.uk
Beech Business Park, Tillington Road, Hereford HR4 9QJ Tel: 01432 352333 www.ravenhill-ltd.co.uk
March 2012 | Farming Monthly | 53
| Machinery
Agricultural technology company delivers top performance CLAAS demonstrates dynamism and profitability. inancial year 2011 was a highly successful one for CLAAS. The company achieved the highest sales in its history, at €3,304.2 million, representing a rise of 33.5 % on the previous year’s figures and outperforming expectations. Furthermore, CLAAS was able to expand its market position in most product groups. At approximately €255 million, CLAAS’ income before taxes has more than tripled on the previous year’s value; in
F
“The growing significance of renewable energies is giving a further boost to the world’s need for crops. At the same time, less and less arable land is available, and it is beginning to be valued more highly, which goes hand in hand with greater use of upto-the-minute agricultural technology.” addition to this, the quality of the financial result has once again taken a leap, with the gross margin rising to 24.9%. In technical terms, too, financial year 2011 was a record year. CLAAS brought the combine harvester to Europe 75 years ago and has sold 435,000 combines
since then, plus a new combine harvesting World Record was set by a CLAAS LEXION 770 combine in September 2011. German specialist journalists have selected not one, but two CLAAS products as “Machine of the Year 2012” in the relevant categories: the JAGUAR 980 forage harvester and the AXION 900, which was launched onto the market in 2011 and is the highest powered standard tractor.
Ready for the Future with Sound Financial Foundations Over the last two years, CLAAS has stayed on course despite difficult market conditions, continuing to deliver positive results, and additionally made use of this period to prepare for the expected recovery. This meant that financial year 2011 saw the company in a position to achieve an outstanding performance in terms of sales and the financial result above and beyond the general recovery taking hold of the market. At the same time, CLAAS was able to increase its equity by €56 million to €870 million, and continues to maintain a strong position in terms of liquidity. Outlook The world’s population currently stands at seven billion, with a further 144 added to that total every minute. This means an increasing need for food. In addition to this, changes in people’s eating habits are driving demand for high-quality foodstuffs. The growing significance of renewable energies is giving a further boost to the world’s need for crops. At the same time, less
• Benthall Brosley, Shropshire • Craven Arms, Shropshire • Docklow, Herefordshire • Tarvin, Cheshire
54 | Farming Monthly | March 2012
and less arable land is available, and it is beginning to be valued more highly, which goes hand in hand with greater use of up-to-theminute agricultural technology. The overall importance of agriculture and agricultural technology is continuously on the rise. In the context of these positive overall conditions, CLAAS is continuing to invest in a sophisticated product development program and in expanding its sales structures in Germany and abroad. The company is about to construct sites in China and Thailand. Alongside all this, CLAAS is placing high priority on further pursuing the courses of action initiated in previous years to boost efficiency and cut costs. The indicators for the agricultural technology sector are continuing to confirm its overall buoyancy. On the basis of these evaluations of the situation, CLAAS anticipates that the dynamic growth seen in 2011 will be followed in the coming year by a moderate increase in sales and convincing results.
Tel: 01952 881000 Tel: 01588 673325 Tel: 01885 488884 Tel: 01829 749391
www.farmingmonthly.co.uk
| News
Cooks Midlands Limited Horsepool Grange, Stanton Under Bardon, Leicester LE67 9TW Tel: 01530 249191 Fax: 01530 249199
Day & Coles (Agricultural) Limited Park Farm Industrial Estate, Wellingborough, Northants NN8 6UW Tel: 01933 673900 Fax: 01933 675858
Keith Davies Agricultural Hem Manor Farm, Hem Lane, Shifnal, Shropshire TF11 9PT Tel: 01952 463840
P & D Engineering Fleet Lane, Bredon, Tewkesbury, Gloucester GL20 7EF Tel: 01684 772912
TRP Pride Parkway, Enterprise Park, Sleaford, Lincolnshire NG34 8GL Tel: 01529 300111 Fax: 01529 300310
Yorkshire Handlers Limited Unit 4-5, Fryors Close, Murton Lane, Murton, York YO19 5UY Tel: 01904 489988
Fax: 01904 489061 E.A. Clayton Limited Willow Bridge Works, Carlton, Stockton On Tees, Cleveland TS21 1EB Tel: 01740 630254 Fax: 01740 631097
www.farmingmonthly.co.uk
Romsey Agricultural Machinery Limited Shorts Farm,Romsey, Hampshire SO51 6DX Tel: 01794 323159
March 2012 | Farming Monthly | 55
| News
Andrew Marwood Ltd Unit 2, Full Sutton Industrual Estate, Full Sutton, Yorkshire YO41 1HS Tel 01759 372888
Lyndon Tucker
Stewart Morley
Oldwalls Garage, Llanrhidian, Swansea, SA1 1HA Tel 01792 391007
The Workshop, Bonds Farm, Morley Lane, Pilling, Preston PR3 6BY Tel 01253 799124 Mob 07802 638385
56 | Farming Monthly | March 2012
Wharfedale Tractors Ltd Unit 1, Riffa Business Park Harrogate Road, Poole-in-Wharfedale, North Yorkshie LS21 2XB Tel 01132 841117
www.farmingmonthly.co.uk
| Machinery
New John Deere Gators Could new Gators be the perfect crossover vehicles? ohn Deere already manufactures the largest range of utility vehicles in the industry, and the new XUV 550 and XUV 550 S4 Gators extend the range even further. These completely new 4x4 Gators, in green and yellow livery, will be available in both two and four-passenger versions – the latter being a first for John Deere – from spring 2012 (the twopassenger version was on show at LAMMA). They are smaller, lighter in weight and even more nimble than existing models, and are the perfect crossover vehicles for work and recreation. To accommodate up to four people in comfort, the XUV 550 S4 model features a stretched chassis that adds a roomy rear bench seat to the two standard front bucket seats. With the flip of a lever, the rear seat can be converted in seconds to a cargo rack to provide additional carrying capacity for bulkier items. There is also plenty of storage space on both models, provided by a large sealed glove box and a sealed area under the bonnet. A powerful 12.1kW (nominal power at 3600rpm) V-twin OHV air-
J
cooled petrol engine provides brisk acceleration to a top speed of 45kph (28mph). The standard specification also includes a fully sealed and enclosed CVT transmission, all-round hydraulic disc brakes and a best in class ground clearance of 262mm (10.3in), with underbody skid protection optionally available. Fully independent all wheel suspension provides 229mm (9in) of wheel travel at the front and 203mm (8in) at the rear. This gives a smooth, comfortable ride and superior traction both on and off the road, with or without loads. An integrated winch with recovery loops is available as an option, for use in more demanding terrain. The durable composite cargo box carries up to 181kg, and can be lifted from both sides. The removable tailgate features truckstyle latching for easy operation with one hand, and there are multiple integrated tie-down points on the inside and outside of the cargo box for securing loads safely. Using the standard heavyduty 51mm (2in) rear receiver hitch, the vehicles can also tow up to 500kg. A wide range of attachments
and options will be available for the new XUV 550 Gators, including half poly or glass windshields and a poly roof, which can be built into a fully enclosed cab if required.
Further options will include a front brush guard and rear bumper, additional front lights, a rear screen and a rail system for the cargo box.
Fendt Secures Thatcham Approval Lower insurance premiums for users. he Fendt Secure immobiliser, which uses unique, coded ‘chip keys’ to provide the highest levels of vehicle security, has now gained Thatcham Category P2 approval. This security industry standard proves the system not only protects the investment against theft, it also entitles owners to lower insurance premiums, too. All new models in Fendt 700 Vario, 800 Vario and 900 Vario ranges, with the latest SCRequipped engines, come with the Fendt Secure immobiliser as standard. The system, first introduced on the 900 Vario in 2007, protects the tractor with a ‘chip key’ that is programmed with a unique code. At the same time various electronic control units are disabled, making it impossible to start the tractor.
T
The proven security this provides is recognised by insurance companies, which reduce premiums for equipment fitted with Thatcham approved immobilisers. The NFU Mutual, one of the UK’s largest farm insurers, for example, provides a ‘Security Discount’ of 7.5% for vehicles fitted with the system. “Rural crime is on the rise and almost every day we hear about tractors and farm machinery being stolen,” says Richard Shelton, Fendt National Sales Manager for the UK and Eire. “The immobiliser cuts insurance premiums because it prevents the tractor being stolen in the first place. This is important, because as anybody who has suffered a theft will tell you, the hassle, time, money and, importantly the inconvenience, are the really big problems that are often overlooked.”
Derwent Road, Malton, North Yorks YO17 0NW Tel: 01653 695094 Fax: 01653 697979 Holme Road, Market Wighton, York YO4 3EW Tel: 01430 872421 Fax: 01430 872461
Agricultural Ltd
RBM
Clarborough Hill, Redford, Notts DN22 9EA Tel: 01777 704823 Fax: 01777 710299 Westrum Lane, Brigg, Lincolnshire DN20 9EY Tel: 01652 650600 Fax: 01652 658180 Bolingbroke Road, Fairfield Industrial Edtate, Louth LN11 0WA Tel: 01507 617588
www.rbmagricultural.co.uk
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 57
| News
Ko Machines
Robson Tractors Ltd
Highwood
Lower Laches Farm, Laches Lane, Slade Heath, Wolverhampton WV10 7PA Tel: 01902 798771 www.komachines.co.uk
Ings Lane, Carlton Husthwaite, Thirsk, North Yorkshire YO7 2BP Tel: 01845 501602 www.robsontractors.co.uk
Yeovil Branch: 01935 478877 Dorset Branch: 01305 266058 Shepton Mallet Branch: 01749 841651 service@highwood-ag.co.uk sales@highwood-ag.co.uk parts@highwood-ag.co.uk
58 | Farming Monthly | March 2012
www.farmingmonthly.co.uk
| Machinery
New Holland Agriculture Case IH products win is off to a winning start AE50 awards with five FIMA and four AE50 innovation awards UA based awards highly respected globally.
Head of New Holland Agriculture is rightly proud.
ew Holland has started 2012 where it left off in 2011, by confirming its status at the forefront of the agricultural industry with five FIMA technical innovation awards. The jury awarded an outstanding innovation award (Novedad Tècnica Sobresaliente), to the SynchroKnife™ central header drive. The four technical innovation awards (Novedad Tècnica) went to the Intelligent Trailer Braking system, Smart Key technology, the Braud 9090X Olive harvester and the Steering-O-
N
www.farmingmonthly.co.uk
Matic™ Plus system for the TK4000 range of crawler tractors. “I am exceptionally proud of these awards and I consider them a fitting testament for New Holland in 2012.” Stated Franco Fusignani, Head of New Holland Agriculture “They represent the key two strengths of our brand, our people, who have shown unswerving dedication and our commitment to developing state of the art technology, which improves the efficiency, productivity and sustainability of the world’s farmers.”
hree Case IH products have been selected to receive the prestigious 2012 AE50 awards. Sponsored by the American Society of Agricultural and Biological Engineers (ASABE), the AE50 awards annually recognise the most innovative new agriculture equipment worldwide. This year’s Case IH award recipients include the independent grain tank cross auger control in Case IH AxialFlow 30 Series combines, the MagnaCut Fine Cut Chopper for Axial-Flow combines and the Quadtrac 600 tractor. “The US-based AE50 awards are highly respected within the global agricultural industry and to have Case IH’s products recognised once again underlines the company’s innovative approach to more efficient
T
farming,” said Charles Blessley, Marketing Manager UK and ROI. For two decades, the AE50 awards have recognized the best products introduced in the agricultural, food and biological systems industries. An expert panel selects up to 50 winners based on commercial impact, contributions to agriculture and engineering, and advancements in engineering and technological significance. To qualify for the distinct awards, each development must have been produced, advertised and made available for sale in the 2011 calendar year.
March 2012 | Farming Monthly | 59
| News
Livestock prefer new smooth-leaved cocksfoot In grazing preference trials, Donata came 2nd only to Motim Timothy and was well ahead of other cocksfoots and several perennial ryegrasses. onata, a new cocksfoot which has much finer, smoother leaves than previous varieties, will be available in the Oliver Seeds Dryland grass seeds mix this spring. Until now, cocksfoot has always felt hairy and coarse due to the presence of silica in its leaves, and animals would often avoid eating it. But breeders at DLF Trifolium have managed to ‘remove’ the silica and developed a highly palatable variety which has smooth, silky leaves. “In grazing preference trials that we ran with cattle and sheep at two UK locations, Donata came second only to Motim Timothy, and well ahead of other cocksfoots and several perennial ryegrasses,” says Rod Bonshor, general manager for Oliver Seeds. “You can immediately tell the difference by running your hand through comparative plots of cocksfoot, and animals can clearly feel the difference on their tongues.”
D
Under-rated Mr Bonshor believes that cocksfoot has been under-rated for too long and has much to offer UK farmers. Its extensive rooting system helps keep an open soil structure and can reach down deep for water in times of drought. It copes with extreme conditions such as cold winters and waterlogged soils, and yields well with less nitrogen fertiliser than perennial ryegrass. The seed is also currently cheaper than ryegrass. “Replacing a third of the perennial ryegrass in a grazing mixture with Donata will be cost effective and provide a more versatile sward, especially on adverse sites,” says Mr.Bonshor. “The only downside is that it is slightly slower to establish than ryegrass, but compensates by lasting longer.”
“Donata came second only to Motim Timothy”
Contact your local dealer: MONMOUTHSHIRE Harold R Johns Ltd 01291 689278
HULL Robert D Webster Ltd 01964 670224
60 | Farming Monthly | March 2012
OXFORDSHIRE LJ + CA Cannings 01235 763103
YORK WJ Shields & Sons 01904 470263 07971868653 www.farmingmonthly.co.uk
| ATV
Top grass results with Wessex Celebrating over 35 years of British manufacturing with a complete range. he rapid growth in the use of the ATV in amenity, private estates, agriculture, forestry and the many other sectors has seen the equally fast development of a wide range of accessories. From mowers, toppers, harrows and sprayers to spreaders and trailers, there’s an accessory to suit virtually every task. Wessex ATV equipment celebrates over thirty-five years of British manufacturing with a complete range. Their AF and AFC flail mowers are designed to complement ATV’s and UTV’s, offering heavy-duty performance coupled with a range of features well suited to controlling dense vegetation, brambles, bracken, long grass and for maintenance in forestry and woodland areas. Maximum cutting power is delivered to the rotor via three Zsection drive belts and a manual
T
clutch, a far more reliable and efficient system than a centrifugal clutch. This allows the mower to work in demanding conditions, making short work of cutting dense materials. There are side mounted (AF) and centrally mounted engine options (AFC) and the mower is available in 1.2m and 1.6m working widths. The cutting height has a range of between 10mm and 160mm with heavy-duty ‘y’ pattern flails mulching and evenly distributing the debris across the width of the machine. There are four variations of wheel configuration to suit any application and satisfy the legal requirements of not only the European CE legislations, but also the stringent British HSE requirements. The Wessex AR series rotary mowers make ideal partners with ATV’s and utility vehicles or a 4x4 for cutting regularly mown areas,
paddocks and general pasture topping. Popular on private estates, farms and studs the mowers are equally at home working with ATV’s in general landscape and amenity fine turf cutting. The range is large with 1.2m, 1.5m and 1.8m working widths and a number of different wheel configurations. In standard format the AR has the wheels on the end of the deck for fine balance, with minimal weight on the drawbar making it easy to hitch to the ATV. With the wheels directly in line with the rotors it follows ground contours accurately for a close cut without scalping. Alternatively there is a rear wheel option for cutting close to fences and borders. The AR series mowers feature a drawbar that is easily offset to either side and there are three overlapping rotors to eliminate uncut strips of grass. Drive is
transmitted to the rotors via two vee-belts and a centrifugal clutch. The cutting height range is 25mm to 140mm and the engine options are Honda or Briggs & Stratton. The Wessex Country range has been developed for groundcare contractors and to meet the needs of landscapers, private estate owners and smallholders. In the range, the AT110 ATV topper is designed specifically to suit the ATV user working to a budget, without sacrificing the top quality associated with the Wessex brand. The topper has a 1.1m working width and power comes from a 12.5hp (9.32kW) Briggs & Stratton engine. Cutting is from a single blade bar, height adjustment is simple and the drawbar allows for use to the left, right or centrally behind the ATV. The Wessex ranges for ATV’s and UTV’s also include trailed spreaders, sprayers, land rollers, drag harrows, trailers and accessories for equestrian facilities. Wessex products are manufactured and distributed in Great Britain and worldwide by Broadwood International Tel: 01420 478111 www.broadwoodintl.co.uk
Day & Coles Agricultural Ltd
Oakes Bros Ltd
Oakes Bros Ltd
Yorkshire Dales ATV
Newton Close, Park Farm, Wellingbourgh, Northants NN8 6UW Telephone: 01933 673900
Clemsfold Corner, Broadbridge Heath, Horsham, West Sussex RH12 3PW Telephone: 01403 790777 www.oakesbros.co.uk
Ridgeway Works, East Ilsley, Newbury, Berkshire RG20 7DJ Telephone: 01635 281222 www.oakesbros.co.uk
Unit 3, Ravenscroft Way, Barnholdswick, Lancashire BB18 6JA Telephone: 01282 851158 www.yorkshiredalesatvcentre.co.uk
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 61
ANDREWS OF HINDHEAD LTD Portsmouth Road, Hindhead, Surrey GU26 6AL Tel 01428 605544
AUTOLINKS Lake Road Garage, Brynmawr Gwent NP23 4AP Tel 01495 310548 www.autolinks.co.uk
DORSET QUADS LTD Dorchester Tel 07969 047502 Email sales@dorsetquads.co.uk www.dorsetquads.co.uk
62 | Farming Monthly | March 2012
EXTREME SPORTS Unit 5, Fleet Road Ind Estate, Holbeach, Lincolnshire PE12 8LY Tel 01406 420002
NORTH CORNWALL TOVE ENGINEERING XP BIKES Unit 15, Yorks Farm Bus. MOTORCYCLE Larkhall, Centre, Yorks Farm, Lanarkshire ML9 2EX CENTRE Hospital Rd, Stratton, Bude, Cornwall EX23 9BT Tel 01288 355162 www.ncmc.co.uk
Watling Street, Towcester, Northants, NN12 6AD Tel 01327 831584
Tel 01698 881885 Contact Ian www.xpbikes.co.uk
www.farmingmonthly.co.uk
| ATV
The 4x4 utility vehicle that lives to work Better fuel economy, longer engine life and quieter ride - shouldn’t you be driving a Kioti Mechron?. he Kioti Mechron is ready, willing and able to take on any job you give it. The Mechron is a multi-tasker for the modern age – combining best-inclass power and build quality with rugged good looks and more than a touch of refinement for both driver and passengers. With the Mechron, ultimate 4x4 performance comes with the territory. Thanks to 4-wheel, fully independent dual A-arm rear suspension and a wide stance, it delivers incredible stability and a super-smooth ride over the roughest terrain. And if you’re in a tight spot? The tight turning circle
T
and rear anti-sway bar guarantee you superb cornering. So come on and get acquainted with the Mechron. You’re in for quite a ride. The heart of this machine is the durable, proven Kioti diesel power unit. This robust engine delivers 22HP from its three cylinders, but the rated speed of 2,800 rpm is lower than most competitors – so you benefit from better fuel economy, longer engine life and a quieter ride. When it comes to the continuously variable transmission, the equally durable gearbox delivers Hi/Lo speeds and 4WD. The Mechron is a brilliantly
balanced workhorse that benefits from excellent weight distribution with a full payload. And what a payload! The (56”) world’s widest cargo bed with 500kg capacity is unrivalled for this class of vehicle, so you can haul more on every trip. And with the optional hydraulic tip kit, you can easily offload a heavy cargo without unnecessary hard work. Drive a Mechron and you’ll benefit from ground clearance that’s a cut above most competitors. The ingenious design provides 12” of ground clearance enabling you to drive almost anywhere. The engine, gearbox
and rear differentials sit above the chassis and are therefore protected from damage. We’ve seen the quality, now it’s time to feel the comfort of the widest 3-seater on the market. The contoured bench guarantees a relaxing ride, with the pair of 2point retractor seat belts and centre belt fitted as standard. In the cockpit, the stylish dashboard has ergonomically designed controls for easy, relaxed driving whilst the neat and handy storage areas add to the modern-day convenience.
The ATV for your everyday needs Most powerful ATV in its class makes the Can-Am Outlander the ideal choice. he Can-Am Outlander ATV range delivers the most power in every class, but when choosing an ATV, it is not just about engine size and price, it is about every component on the machine working together to reduce weight, optimise power and improve handling. The CanAm ATV offers the Total Performance Package.
T
www.farmingmonthly.co.uk
Every Can-Am ATV is powered by a Rotax engine and delivers more horsepower than any vehicle in its class. Every engine is electronically fuel-injected to start easily and run smoothly. Can-Am ATVs have the best Power-ToWeight ratio in every class, and to help fulfil the needs and concerns of the agricultural industry, there are tailor- made packages and
specific accessories to help farmers make light work on tough terrain. The shocks and suspensions and 4WD systems are designed to provide comfort and control on rough terrain. All Outlander models also come equipped with Digitally Encoded Security System – an exclusive anti-theft system that will not allow the ATV to start unless a coded
microchip in the key matches a code embedded in the engine control module. For further information on our range of Can-Am Outlanders or for a test ride contact Mike Pryce Agricultural Machinery on 01691 830308.
March 2012 | Farming Monthly | 63
| ATV
Honda Foreman signs in Suzuki ATV: The right tool for lambing All-new TRX500 strengthens Honda ATV line up
And with 0% finance available, there's never been a better time to buy.
onda (UK) has further strengthened its marketleading product offering with the introduction of the fifth generation of its heavy-duty ‘Foreman’ ATV. Two new models will be added to the Foreman family - TRX500FM (manual shift) and TRX500FE (electric shift) – which have undergone a total redesign from the ground up, using an entirely different design procedure that places extensive customer feedback at the heart of the changes. Taking the durability and performance for which Honda ATVs are famed, the new Foreman models now come with a raft of significant new features designed to improve rider experience, increase usability and meet the needs of the demanding utility market sector. The new Foreman has a different look and feel, too. All new body styling gives it a more purposeful and ‘open’ appearance and redesigned front/rear mudguards offer exceptional mud
H
and splash protection. Improved steering geometry, new seat design, upgraded rider position and a smoother gear change all combine to offer a first-class rider experience that is considerably less fatiguing during prolonged use. Both are now available from the Honda (UK) Authorised Dealer Network and, as with all Honda ATVs, the new models come with a two-year warranty*. Phil Webb, Head of Power Equipment at Honda (UK) comments: “We didn’t want to simply add a few new bits to the old Foreman, we wanted a completely reworked machine featuring significant changes that people really wanted. So, we undertook a comprehensive survey of customers and input their feedback into the design process and this exceptional new machine is as much a testimony to them as it is to our engineers and designers’ clever design. The Foreman has definitely evolved but will continue its heritage as a class-leading, heavy-duty ATV.”
64 | Farming Monthly | March 2012
ith the lambing season underway, Suzuki's dependable range of ATVs are ready to help take some of the weight off your shoulders. Whether it's anything from strapping your essential lambing tool kit to the handy luggage racks, towing a trailer to transport ewes or lambs around, right through to carrying and distributing feed, Suzuki ATVs play an important role in lambing. Currently, the range of practical and efficient KingQuad ATVs are available with 0% finance at participating dealers*. The Suzuki KingQuad range offers easy-to-use solutions for everything from personal transport to towing equipment and they're now easier to own with affordable finance packages. Following their popular 6 months' free fuel and ATV trade-in campaigns, which ran in 2011, Suzuki continues their aim to develop offers that meet their customers' needs. "We know that this is a particularly busy time of year for our customers and worrying about financing their ATV
W
purchase is the last thing they need." Commented Gareth Lumsdaine, Sales and Marketing Manager, Suzuki ATV. "That's why we've introduced the 0% finance package with participating dealers, to let customers focus on their business in this challenging season." The finance offer runs to 31st March 2012 and is available on all Suzuki KingQuad ATV models including the KingQuad 400, which proves popular with hillfarmers thanks to its option of manual gears and selectable four wheel drive. The KingQuad 500 and 750 Power Steering models are also included and are ideal for transporting loads over demanding terrain, with the power steering significantly reducing rider fatigue. Don't be let down when it matters most this lambing season, book a test ride with your local Suzuki ATV dealer today. For more information on the Suzuki ATV range or to arrange a test ride, find your local dealer at www.suzukiatv.co.uk or call 0500 011 959.
www.farmingmonthly.co.uk
| ATV
Polaris 2012 Dealer Conference An opportunity to recognise excellence on behalf of the Polaris brand. yères is the oldest resort on the French Riviera and it was this year’s choice for the 2012 Polaris Dealer Conference. Four kilometres from the sea, the old town is built on a mount around the Castle of Saint Bernard with a view to pinecovered hill of Costebelle. As part of the Polaris EMEA Dealer Meeting there was a high percentage turnout of the UK Polaris dealers. The dealers had the opportunity to ride out on 80 new machines around the surrounding hills with spectacular views. The conference presentation showed Polaris’ Off Road Vehicle sales up 9% with revenue up 12% and the Polaris Ranger accounting for over 50% of sales. The 2012 ORV line-up was revealed, together with a more structured reward program for the dealers. It was announced that the partnership with the NFU continues and the international overview included the Polaris acquisition of Goupil, part of the
H
corporation’s expansion in electric utility vehicles. To round off the
conference, the dealer awards were presented as shown here.
Polaris Britain: 0800 915 6720 www.polaris-britain.com
Polaris 2012 Dealer Conference Award Winners Most Improved Dealer 2011
Most Improved Dealer 2011
North Region
West Region
Most Improved Dealer 2011 East Region
CC Supplies
Ace ATV
Rafferty Newman
Best Overall Dealer 2011
Best Overall Dealer 2011
Best Overall Dealer 2011
North Region
West Region
East Region
Ellis Quads
Congleton Garden Machinery
ATV World
Service Dealer of the year 2011
Service Dealer of the year 2011
Service Dealer of the year 2011
North Region
West Region
East Region
The Lawnmower Centre
David Webb Engineering
The Rocket Centre
Outstanding Achievement 2011 ATV World
POLARIS Dealer awards 2012
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 65
| Motors
We take Fords new pick-u p out on the trail...
trip to Donington Park usually involves me, my leathers, a helmet and a two wheeled mode of transport – not so last month when I was invited along to test the latest workhorse from Ford – the New Ranger. And when they say new they mean it. Designed to the “One Ford” global strategy which aims to produce vehicles to satisfy customers from every market, this new Ranger has seen development and testing worldwide encompassing some of the toughest conditions that might be encountered. Totally new from the ground up, the design and development team (head-quartered in Australia) had access to the latest computer technologies and extensively tested the vehicle in 15 countries around the world to ensure that this new model was tough enough to withstand the harshest conditions and environments from extreme heat and cold, monsoon rains, high altitudes, arid deserts, rushing rivers and potholed roads. More than a million kilometres were racked up
A
in all – but was it all worth it? Well, I would say it's a resounding yes. This new Ranger certainly looks the part – it's a beauty...and it's massive. At 5.35 meters long, 1.85 meters wide and 1.81 meters tall, there's no denying it has presence - but it remains manoeuvrable with responsive steering and good all round visibility - and you'll need it for negotiating our country tracks, narrow B roads and for that trip into town. This is Britain, after all. The off road test track at Donington is an excellent test of just what this vehicle is capable of and I have to say that I was really impressed with the Ranger. My “co-driver”, a “sheep farmer from up North” as he put it, put me through my paces, demonstrating just how useful the various improvements to the new Ranger really are. Immediately apparent was the clearance this thing has when negotiating uneven terrain. I didn't think we were going to make it over some obstacles but the Ranger took it all in its stride. Off-roading in a pick-up? No problem.
66 | Farming Monthly | March 2012
Taking pleasure in demonstrating the anti-stall (I couldn't get it to stall – even changing straight to 5th ) and other features, he tells me he's buying one himself. Well he would, wouldn't he? The bigger they are...the harder they pull! With a best in class towing capacity of 3,350kg (on selected models with diesel engines) you will have no problem dragging whatever you care to hitch up to it – perhaps you fancy moving house(literally) or pulling your tractor out when it gets stuck in the snow? OK, I might be stretching the realms of fantasy a bit far but you get the picture. This thing can pull. Add in the trailer anti-sway, antistall and a reversing camera and you have an unbeatable towing combination. And they are not the only bits of electronic “trickery” that the Ranger can boast. The traction control system works a treat, even off road with road tyres and the easily selectable (by a knob on the centre console) 2/4/hi/low drive is a boon. Hill Descent Control adds to the gamut of features and this
operates as expected, just like the Land Rover Discovery I tested just a week before. But this is a pick-up! How does it drive? On road I was pleasantly surprised too. There is less roll than you expect into corners, and the ride is actually quite refined, with a fairly quiet cabin at speed and very “car like” handling in general. At the business end, the 2.2L 150ps engine is less agricultural than you'd expect – the more powerful 3.2L unit available in Wildtrack guise is obviously more gutsy but less economical when it comes to measuring sips per mile. Ford claims figures of 33.2mpg for the 2.2L double cab manual 4x4 as opposed to 29.7 for a similar 3.2L vehicle. Tell-tale diesel “clatter” is there when you accelerate hard though, especially from standstill. Although we have to accept that diesel will probably never be as quiet as a petrol engine – and Ford have certainly gone some way to making the oil burner less noisy with regards to sound
continues on page 68
www.farmingmonthly.co.uk
| Motors
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 67
| Motors
continued from page 66 deadening materials and such – I still find myself thinking that more could be done in this area. A choice of two gearboxes (a 6 speed manual or 6 speed automatic) is available – my test vehicle had the manual box and it was decent with smooth changes and a robust feel. It also acts like “Teacher” with an up-shift indicator on the instrument panel which aims to coach you when it's best to change gear for better fuel economy. Nobody likes Teacher but I always get sucked into “the game” somehow! In the cabin, you might forget you're in a pick-up and not a Focus. Nice, supportive seats and a good driving position makes this a workhorse that will take you to your next job in relative comfort. The dashboard has a modern look about it, the glove-box is usefully large and there are a multitude of storage cubbyholes, cup-holders and 12v outlets to plug your toys into. There's nothing to complain about in the back either. Ample leg room, headroom and handy under seat storage completes the picture. When it comes to the business of carrying stuff – which is what it's for, right? - then you won't be disappointed either. More class leading accolades here too with the Regular and Super cab versions boasting 1.82 cubic metres and 1.45 cubic metres respectively. Even the Double Cab can swallow 1.21 cubic metres of load which keeps up with the best of the rest. Running the kids to school on the way to picking up some feed? No need to worry there either – the new Ranger has been awarded a 5
star Euro NCAP rating ...the first ever pick-up to achieve such a thing. Another bar raised by Ford. As I parked up to take a few photos, an old Ford pick-up went past and parked up at the side of the road. An old chap hurried over and asked me excitedly, “what's that you're driving?” Twenty questions later he was taking a look around the new Ranger and then he was off. His parting words? “I'll have to get down the showroom – I'm due a trade-in”. Apparently, his current model had covered 140,000 with just a cambelt change. I hope I get commission for THAT sale! Now we all know that the Hilux seems to be the farmers “weapon of choice” these days but L200 and Rodeo...and even Navaro in a small way...have been biting at it's heels. It's also true to say that, although the old Ranger was a capable performer, it's always been somewhat overlooked. I've heard whispers of perceived quality/reliability issues – after all, it's a Ford... But wait. The company has had somewhat of a renaissance of late – the quality of their passenger cars has certainly improved immensely – think new Fiesta, Focus, Mondeo et al, often best sellers in their class. Great design, great engines and great equipment levels, with a very reasonable price tag. Now translate that in to the new Ranger which benefits from all the same qualities and I believe, after driving it, that Ford are onto a winner. Starting at just over £15k for the entry level single cab model is great value and when you take into
68 | Farming Monthly | March 2012
account all the extra (useful) features on the higher models, their price tags are still attractive when compared to the competition. You might baulk at the £25,000 or so asked for the Wildtrack model but that's not really the one you want...is it? Our suggestion? Drive one – you
might even get a similar chance as us to test it off road (I understand that some of the bigger dealers, certainly, are offering the opportunity) , but give it a go. Once you have, you may well be trading in the 'lux. Andrew Poulton (Editor)
www.farmingmonthly.co.uk
| Motors
Crossover to the new 12MY Mitsubishi ASX Practicality and versatility are key to the appeal of the ASX.
he first allocation of Mitsubishi Motors’ new model year ASX arrived in the UK earlier this year. The urban crossover vehicle, like its predecessor, offers best possible choice of practical, stylish and environmentally responsible family cars. Stylish and Practical Based on the same platform as the Outlander, Lancer and Lancer Evolution X, the ASX bridges the gap between Mitsubishi’s conventional passenger cars and its rugged offroaders. Practicality and versatility are key to the appeal of the ASX. With a wheelbase to match the Outlander, passenger space is generous, with the flexible seating inside giving the ASX real versatility for customers looking for a practical, enjoyable family car. Environmentally Sound Offered with a choice of petrol or diesel power plants the 12MY 1.8-litre diesel engine benefits from a significant reduction in CO2 emissions, whilst improving fuel economy. This results in a new VED band (from Band F to Band E), thus reducing the annual road tax cost to £115. Although there is no reduction in VED banding on the petrol derivative, there is an increase in braked towing capacity from 1100kg to 1200kg. With class-leading economy and emissions,
T
Ashby & Mann Mitsubishi Hinckley, Leicestershire, LE10 1RL Tel: 01455 250052
in line with Mitsubishi’s environmental aspirations, the 116PS 1.8-litre DiD now achieves 54.3mpg (from 51mpg) and 136g/km (from 150g/km) on the official combined cycle, with the 1.6-litre petrol engine managing 47.1mpg (from 47.9mpg) with CO2 emissions remaining at 139g/km. Helping the ASX achieve its impressive economy and emissions figures are low rolling resistance tyres, regenerative brakes and intelligent power management to allow the ASX to return its impressive consumption figures. Indeed, every aspect of the ASX has been engineered with its environmental performance in mind, to help create not just an enjoyable, versatile family vehicle, but a responsible one too. Top Marks for Safety The ASX isn’t just environmentally aware, it’s a safe choice too. The ASX incorporates Mitsubishi’s RISE safety technology (which dissipates the energy from the impact away from the passenger compartment) as well as ABS anti-lock braking, Active Stability Control, Traction Control, Electronic Brake Distribution, Brake Assist an Emergency Stop Signal System and 7 airbags as standard. The result is a reduced likelihood of an accident, but should a collision be unavoidable the ASX not only
provides outstanding levels of occupant protection – with a 5 Star Euro NCAP rating – but also excellent pedestrian impact protection. Lance Bradley, Managing Director of Mitsubishi Motors in the UK, said: “The crossover marketplace has grown rapidly over the last 18 months. The Mitsubishi ASX has helped this growth by offering a stylish, well priced, practical and enjoyable to drive contender in this marketplace. “With the ASX delivering excellent economy and emissions, versatility, as well as comprehensive standard equipment, and not to mention the reassuring safety features, the ASX has everything the crossover buyer is after.” Aftersales and Servicing The ASX comes with three years unlimited mileage warranty, 12 year anti-corrosion perforation warranty, 3 year pan-European roadside, home and accident assistance. Servicing on the 1.6 ASX is 12,500 miles or 12 months, whichever occurs first and the servicing on the ASX 1.8. DI-D on the 2WD and 4WD is 9,000 miles or 12 months, whichever occurs first. The Mitsubishi Service Plan (MSP) is also available for the additional cost of £450 on the petrol variant and £650 on the diesel variant.
Grenson Mitsubishi
Lewis Mitsubishi
Rodgers of Plymouth
Tees Valley Mitsubishi
Middlewich Rd, Crewe, CW2 8UY Tel: 01270 507490
Ronic House, Chicester, PO18 8PN Tel: 01243 574141
Brixton Rd, Devon, PL8 2BL Tel: 01752 402623
McMullen Rd, Darlington, DL1 1XP Tel: 01325 462222
www.farmingmonthly.co.uk
www.lewis-mitsubishi.co.uk
March 2012 | Farming Monthly | 69
| Motors
Bob Gerard Limited Leicestershire 01162 592224 www.bobgerard.co.uk
Duckworth Isuzu Lincolnshire 01673 841410 www.duckworthisuzu.co.uk
70 | Farming Monthly | March 2012
Hammonds Of Halesworth Suffolk 01986 834090 www.hammondgroup.co.uk
Lifestyle Isuzu Kent 01892 515666 www.lifestyleisuzu.co.uk
Newcastle Isuzu Tyne & Wear 01912 573309 www.newcastleisuzu.co.uk
www.farmingmonthly.co.uk
| Motors
Isuzu D-Max: The all new pick-up Coming our way soon... suzu UK will launch an allnew pick-up in June 2012. In recognition of its fundamental upshift in performance, quality, efficiency and refinement, the new model bears a fresh name for the UK pick-up sector: Isuzu D-Max. Building on the solid reputation that its predecessor created for the
I
brand as a manufacturer of highly capable, robust, dependable pickups, the new Isuzu D-Max is the result of the most comprehensive new product development programme in the Japanese company’s history. The new Isuzu D-Max features aggressive and imposing exterior styling that reflects its exceptional load-lugging capacity, towing capabilities and off-road performance. Inside, driver and passengers will find a spacious and refined cabin featuring highquality materials and an impressive standard specification. Isuzu’s new pick-up sees the introduction of extensively redeveloped common-rail diesel engines, which will deliver significantly improved emissions and fuel economy together with
more flexible and accessible power and torque. “The result of an exhaustive development process that included extensive research amongst customers around the world, the all-new Isuzu D-Max is an incredibly appealing package that will deliver in every key area that matters to those in farming, construction and other outdoor industries,” said William Brown, General Manager of Isuzu UK. “Available from June through a dedicated, expanding dealer network, this new model will reinforce Isuzu’s strong reputation as the pick-up professionals. I’m confident that the new Isuzu DMax will continue the record of impressive year-on-year sales growth that has seen the UK become the brand’s number one
European market,” concludes Brown. Further specifications and details of the Isuzu D-Max will be released next month. To receive more information, please register at www.isuzu.co.uk. To stay informed of Isuzu and the launch of the Isuzu D-Max, please like Isuzu UK on Facebook, follow @IsuzuUK on Twitter, and subscribe to the IsuzuTV channel at YouTube.com.
JEEP® sales soar by over 60% in Europe in 2011 ales of Jeep® brand vehicles rose 61.8 per cent in Europe (the 27 member states of the European Union, plus the four European Free Trade Association countries) in 2011 versus 2010 – compared to an industry decline of 1.4 per cent – according to numbers released by the European Automobile Manufacturers’
S
www.farmingmonthly.co.uk
Association (ACEA). In 2011 in Italy, Jeep sales increased 117.6 per cent versus 2010, with registrations increasing 71.7 per cent in France, 124 per cent in Germany, 21.2 per cent in Spain and 18 per cent in UK. In December, Jeep sales rose 47.8 per cent in Europe versus December 2010, while the industry declined 5.8 per cent.
“The increase in Jeep sales in Europe is evidence that Chrysler Group’s integration with the Fiat Group is clearly working,” says Mike Manley, President and CEO, Jeep Brand, Chrysler Group LLC. “Much of the Jeep brand’s success in Europe can be attributed to a strengthened dealer network, as well as a rollout of new Jeep models for the European
market – including the incorporation of Fiat’s fuel- and emissions-saving MultiJet II technology on the new 3.0-litre CRD engine that powers the Grand Cherokee.” In addition to increases in Europe, Jeep brand sales rose 44 per cent in the US in 2011, and 41 per cent globally.
March 2012 | Farming Monthly | 71
| Motors
New generation i30 family to be extended
XIV-2 Concept - by SsangYong
Revealed at Geneva.
Looking to the future.
head of its world debut at the 2012 Geneva Motor Show, the New Generation i30 wagon has today broken cover. It is the second member of the New Generation i30 family, and joins the five-door hatchback to broaden the appeal of Hyundai’s C-segment range. The stylish wagon shares engines and running gear with the well-received New Generation i30 five-door, but has a longer body to create a significant increase in trunk space without compromising the model’s dynamic styling. The i30 wagon’s overall length is increased by 185 mm to 4485 mm over its five-door sibling, making it one of the most accommodating vehicles in the European C-segment, and 10 mm longer than the original i30 wagon. Compared with the five-door, the wagon expands trunk space from 378-litres to a best-in-class 528-litres – and with the rear passenger seats folded down, cargo volume increases more than three-fold, to 1,642-litres. Like its hatchback sibling, the New Generation i30 wagon was designed and engineered specifically for European customers at Hyundai’s European R&D Centre in Rüsselsheim, Germany. It was developed alongside the hatchback form from the earliest stages, enabling the stylists to fashion a coherent design that bears a strong family resemblance inspired by Hyundai’s fluidic sculpture form language. As with the five-door variant, the front is distinguished by Hyundai’s hexagon-shaped grille and jewellike headlamps, but from the Bpillar backwards the wagon differs significantly. The roofline extends
A
rearwards over the flexible passenger/cargo area, sloping to add dynamism to the car’s stance in keeping with the fluidic sculpture ethos of a stationary car appearing to be in motion. Further enhancing the wagon’s dynamic appearance, a pronounced swage line runs horizontally along the sides of the body and rises all the way to the rear lights. The rear windscreen wraps around the D-pillars, increasing interior luminosity and benefiting visibility. The deep tailgate gives the car a clean look and opens to bumper-level for easy loading. The New Generation i30 wagon will be available across Europe with the same three petrol engines and three diesel engines as the five-door, producing 90 to 135 ps. The full UK specification will be confirmed at a later date. Buyers of the New Generation i30 wagon will benefit from Five Year Triple Care, comprising a fiveyear unlimited warranty, five years’ roadside assistance, and five years of vehicle health checks. Allan Rushforth, Senior Vice President and Chief Operating Officer of Hyundai Motor Europe, said: “The New Generation i30 has been widely praised for its style, quality, and value. Our new wagon offers all of those attributes plus even greater load-carrying capacity. We expect it to appeal strongly to those looking for stylish and flexible practicality, especially active families.” The New Generation i30 wagon will be unveiled alongside Hyundai’s other newcomers during the company’s press conference in Hall 1 at 09:45 (CET) on Tuesday 6th March 2012.
72 | Farming Monthly | March 2012
sangYong will showcase its new XIV-2 ‘convertible’ concept car at the 82nd Geneva Motor Show in March, a successor to the XIV-1 concept presented at IAA International Motor Show, Frankfurt 2011. SsangYong is developing the XIV-2 (eXciting User Interface Vehicle 2) concept as a premium CUV (crossover utility vehicle). A strategic model for the global market, its styling cue is based around ‘a special experience with fun’, and blends the characteristics of a robust and powerful SUV with the dynamic style of an open top
S
sports coupé. XIV-2 features a one-touch automatic opening soft-top roof to provide ‘wind in the hair’ driving enjoyment, and with its futuristic and aesthetic appearance is designed to appeal to the younger generation. Measuring 4,166mm (length) x 1,820mm (width) x 1,566mm (height) and with a 2,600mm wheelbase, XIV-2 will be equipped with eco-friendly, fuel efficient 1.6 litre diesel and petrol engines meeting Euro VI emission regulations.
NEW DEALER....... The new SsangYong Korando crossover is now available in Bury St Edmunds and the surrounding area, thanks to the appointment of Rawlinson SsangYong. The dealership will operate the SsangYong franchise from its premises in Easlea Road, Bury St Edmunds. Commented Jonathan Rawlinson, managing director of Rawlinson SsangYong, “We are
delighted to have been appointed to represent SsangYong, and greatly look forward to playing our part in its success. The Korando is a great car, and with a very competitive price and 5 year limitless warranty we believe it will do extremely well in our area, and have every confidence in its success.”
www.farmingmonthly.co.uk
| Motors
SsangYong springs into ‘12’ with the limited edition Korando LE Visit your local dealer to see what all the fuss is about. sangYong has launched a limited edition of its recently introduced Korando crossover - the Korando LE. Distinguished by its special 18 inch alloy wheels, rear spoiler and privacy glass, the Korando LE includes luxury touches inside such as heated front seats, leather covered steering wheel and gear shift, and for extra safety and convenience, cruise control and rear parking sensors. Styled by Italian car designer Giorgetto Giugiaro of Ital Design, this latest addition to the Korando crossover line-up is covered by the standard 5 year unlimited mileage warranty available on all SsangYong cars and priced from just £17,995 on the road. A highly competitive low interest finance offer of £259 a month is available on the Korando LE, which also includes 5 years free servicing for even greater peace of mind.
S
www.farmingmonthly.co.uk
Available in Grand White as standard, metallic Vitamin Red or Space Black, the Korando LE is powered by an advanced 173bhp 2.0 litre four cylinder turbo diesel engine producing 360Nm of torque with CO2 emissions of only 157g/km. The LE has the same mechanical specification as the two wheel drive Korando S. 5 years free servicing is also available on all Korando models purchased with the finance offer during February and March. Offer ends 31 March 2012. “We have tailored this car for
today’s tough economic motoring conditions, both out on the road and in the wallet,” says Steve Gray, marketing and communications director of SsangYong Motor UK. “As a crossover it provides the perfect solution to meet virtually every motoring requirement. Several cars in one, it’s the family hatchback for the daily school or commuter run; a load lugger for that long distance cross-country dash, and the perfect tow car thanks to its 2 tonne towing capacity - for hauling the caravan
or boat to your summer holiday destination. “But money matters, especially in the current economy, so we have assembled a package that includes a highly competitive purchase price, additional equipment, a low rate finance offer with 5 years free servicing and 5 years limitless mileage warranty. We hope the Chancellor of the Exchequer is impressed!” The Korando LE finance offer is available throughout March from participating SsangYong dealers.
March 2012 | Farming Monthly | 73
| Motors
Subaru announces prices for new XV crossover
Style, efficiency and a standard equipment list to make others blush. ubaru has announced pricing and specification levels for its new AllWheel Drive crossover vehicle, the XV. Priced from £21,295 for entry level 1.6i S models, the latest addition to the Japanese brand’s stable is set to firmly establish itself as one of the most capable and best-value-formoney compact crossovers currently available. The five-star Euro NCAP-rated Subaru XV – officially certified as the safest vehicle in its class and which scores particularly highly for child occupant safety – combines style and functionality with generous levels of standardfit equipment, making it more than a match for many of its established compact crossover rivals. Every XV is equipped with two core Subaru technologies – Symmetrical All-Wheel Drive and a Boxer engine – ensuring that this new vehicle feels both engaging and incredibly safe to drive, in all conditions. Subaru is confident that the XV will thoroughly satisfy the needs of existing customers, while also attracting new consumers to the brand. Three Euro V-compliant Boxer
S
engines are offered with the new XV: 1.6 and 2.0-litre petrol, and 2.0-litre diesel. The 1.6-litre and 2.0-litre petrol engines develop 114ps and 150ps respectively, while the 2.0-litre diesel produces 147ps and 350Nm. The goanywhere XV is available with a choice of either a five and sixspeed manual or a six-speed CVT automatic (petrol only). Reaching 60mph in 9.3 seconds, the 2.0 diesel XV – likely to be the best-selling variant in the UK – offers class-leading fuel economy of 50.4mpg on the combined cycle, while emitting 146g/km of CO2. Subaru’s XV also features the highest ground clearance and lowest centre of gravity in class, making it a highly capable performer both on and off road. Even entry-level S models feature a standard kit list to make many models from premium compact SUV manufacturers blush. Buyers can expect to find ABS, traction control, Subaru Vehicle Dynamics Control (SVDC), front, side, curtain and knee airbags, 17-inch alloy wheels, daytime LED running lights and automatic air conditioning as standard. SE models add cruise control,
74 | Farming Monthly | March 2012
rear-view camera, Bluetooth functionality and USB/iPod connectivity. Meanwhile, top-ofthe-range SE Lux Premium models also come with a sunroof, Keyless Smart Entry, push-button start, leather seats and satellite navigation. All 2.0-litre models are fitted with roof rails. Petrol-powered XV models benefit from Subaru’s new fuelsaving Auto Start Stop System as standard, boosting fuel savings in congested traffic. It was the aim of Subaru engineers to make the engine cut-out virtually
unnoticeable to the driver, and they achieved this with a time lapse between stop and start of approximately 0.2 seconds, one of the fastest currently available. Pricing for the new XV range starts at £21,295 for the 1.6i S models, and rises to £29,995 for the range-topping 2.0D SE Lux Premium. For more information about the XV or the rest of the Subaru line-up, visit www.subaru.co.uk.
www.farmingmonthly.co.uk
| News
Ashburton Motor Works Ltd Peartree Cross, Ashburton, Newton Abbott, Devon TQ13 7RB Tel: 01364 652302 www.devon-subaru.co.uk
Cross Roads Treadington, Shipston on Stour Warwickshire CV36 4NN Tel: 01608 661544 www.subaruvehicles.co.uk
Lifestyle Subaru Unity Automotive Peterborough Ltd Mount Ephraim, Newark Road, Peterborough, Royal Tunbridge Wells, Kent TN4 8AG Cambridgeshire PE1 5QJ Tel: 01892 515666 Tel: 01733 893704 www.lifestylesubaru.co.uk www.unityautomotive.co.uk
Carstins 324 Station Road, Balsall Common West Midland CV7 7EF Tel: 01676 533145 www.carstins.co.uk
Europa Granville Square, 48 Suffolk Road, Sheffield S2 4AL Tel: 08445 764869 www.europa-subaru.co.uk
Newcastle Subaru 53 Queen Alexandra Road West North Sheilds, Tyne & Wear NE29 9AA Tel: 0191 257 3309 www.newcastlesubaru.co.uk
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 75
| Motors
Images of the European CR-V prototype revealed onda has revealed images of the European CR-V Prototype ahead of its public debut at the Geneva Motor Show on 6 March 2012. This preview model highlights the exterior styling direction of the all-new fourth generation European Honda CR-V, which is
H
set to go on sale in Autumn 2012. Compared to the previous generation, this Prototype adopts a more aggressive stance with deeper sculpting of the
body lines and a bolder front fascia. The lower front bumper wraps smartly upward to convey
SUV capability, while the lower front bumper design now integrates more smoothly into the fascia for improved aerodynamics.
New Lexus RX 450h debuts at Geneva Motor Show World premier of the new vehicle. he new Lexus RX 450h made its world debut at the Geneva motor show on 6 March, alongside the first F Sport interpretation of the full hybrid luxury SUV. Due to go on sale this summer, the new RX
T
will continue to play an important role in the Lexus model range. Other highlights of the Lexus presentation at Geneva included the first European appearance of the much-acclaimed LF-LC
hybrid sports coupe concept, and the new GS 450h and GS 450h F Sport.
The new Cross Coupé concept: Volkswagen’s 157 mpg SUV CO2 emissions of just 46g/km makes this vehicle REALLY green. ast year, Volkswagen unveiled the Cross Coupé concept at the Tokyo Motor Show, powered by a plug-in petrol-electric hybrid system. This month, a new Cross Coupé made its debut at the Geneva Motor Show, but with an even more frugal plug-in hybrid drivetrain.
L
78 | Farming Monthly | March 2012
The Cross Coupé Concept is powered by an alliance of a turbodiesel direct injection engine (TDI) and two electric motors. Its combined fuel consumption in the New European Driving Cycle is a sensationally low 1.8 litres per 100 km (around 157 mpg). This translates into CO2 emissions of just 46 g/km, in a powerful SUV
with a top speed of 220 km/h (137 mph), 225 kW / 306 PS of power and a kerb weight of 1,858 kg. Further information about the Cross Coupé should be available now.
www.farmingmonthly.co.uk
| Motors
www.farmingmonthly.co.uk
March 2012 | Farming Monthly | 79