Ideal Coating Adopted by Glass Reactors Manufacturer In the instruction book, users can find that many components of reactors are made of PTFE. Glass reactors manufacturer adopts PTFE as the ideal coating. Here are more: http://www.toption-china.com/glass-reactors-manufacturer/.
PTFE can be regarded as the non-sticking coating or the material can be cleaned easily. This material has the characters of anti-acid, anti-alkali and resistance of all kinds of organic solvent. It can hardly dissolve in all kinds of solution. At same time, PTFE can be efficient also under the high temperature condition. Due to the low friction coefficient, PTFE can be not only used as the lubricant but also become the ideal coating for the inlayer of water pipe. Researchers found that PTFE has advanced properties and can be used as sealing ring of atomic bomb and shell. PTFE came into commercial process in 1946. It has excellent chemical stability and corrosion resistance and it is material which has the best corrosion resistance on the world. It has the corrosion resistance on all kinds of chemical material except from molten alkali metals, chlorine trifluoride, chlorine pentafluoride and liquid fluoride. It will not change the characters even boiling in the agua regia. Due to the strong corrosion resistance of PTFE, it got the wide use in the occasions which need acid and alkali resistance and organic solvent. It can provide the well sealing, electrical insulating property and temperature resistance. Besides, it has no toxicity on human body. PTFE solved a lot of problems in chemical industry, petroleum and pharmacy fields. The PTFE is adopted for the manufacture of sealing components and gasket. Contrast to other plastic, PTFE has the resistance to chemical attack and it has been widely used as the sealing material and packing material.
The well development of PTFE and the plenty of advanced properties are the main reason why these manufacturers adopt it as the sealing and lubrication material of reactors.