Maintenance Advice of Glass Separator Due to the plenty and advanced functions of reactors which adopts high borosilicate glass as the main texture, glass separator put forward a series advices for users to keep a well performance of reactors.
Generally there are four main parts of this kind of reactor which include main frame, mechanical agitation part, heating part and glass part. The key components and part of the mechanical part are made by stainless steel which has high quality and advanced antiseptic property. The reaction part of this kind of reactor is made of high borosilicate glass which is the advanced glass texture with low expansion rate, thermo stability, high strength, high hardness, high transparency and chemical stability. Due to the superior capabilities, this kind of glass texture is widely used in various industrial fields. Because of the advanced material it adopts and the superior functions, this kind of reactor need strict maintenance during the using. During the using and maintenance of the reactor, there are a series factors should be paid more attention by users. Before turning on the reactor, the mains input should be checked if it is fit the standard listed on the duty plate. When the reactor is on working, the flowing of material and the power of motor speed may form into resonance at a certain time. So users should to change the revolving speed to avoid the resonance. The high borosilicate glass texture needs regular swapping to keep the clear view of reaction process. Users cannot close each port too tight and these ports need to be loosed at regular intervals to avoid broken. The electrical part of the machine cannot be contacted with water and the seal ring also needs to be clean with soft cloth every now and then. Users should strictly obey the requirement on the instruction book to make a fully use of the machine and keep the well performance of the reactor.