DENTIS IMPLANT The cleanest implant in the world by Fab Bor

DENTIS IMPLANT The cleanest implant in the world Su-Gwan Kim, DDS, MSD, PhD

_Dentis Implant System Selection Guide

_Clinical Cases _Published Articles

PREFACE... Dentis Co. was established in March 2005 with the goal of manufacturing the cleanest implants possible and providing the best value to patients. Today, our cell phones are used worldwide. Although they have been in production for about 25 years, we have captured more than 20% of the world market share because of superior functions and quality. Similar to cell phones, Dentis has also focused on become the best in the implant field worldwide by responding to changing market conditions and meeting customersâ&#x20AC;&#x2122; needs. In addition to becoming a recognizable brand in the implant market, Dentis makes the cleanest implants available with the greatest degree of precision and the best technique. Consequently, Dentis is striving to become the leader in the Korean implant market. Dentis hopes to restore the happiness of its patients with a natural smile, and plans to expand the implant industry in Korea to other countries. Dentis will deliver the b e st quality, and aims to become the company re p resenting Korean implants worldwide. This book is constructed for readers to understand readily, and it would provide important knowledge and information not only to beginners but also to dentists who require advanced approaches. We hope that this book facilitates the understanding of the introduction of Dentis, clinical cases, and research papers while becoming a useful guideline of clinical techniques for better basic research and clinics. Finally, I thank Gi-Bong Sim, President of the Dentis implant who was in charge of consulting and providing all supports and encouragement until the publication of this book, KiYoung Park, President of JeeSung Publishing Company, and the staff of our Department of Oral and Maxillofacil Surgery. Su-Gwan Kim

Professor Su-Gwan Kim. DDS, MSD, PhD Department of Oral and Maxillofacial Surgery College of Dentistry, Chosun University 421, SeoSukDong, DongGu GwangJu City, Korea 501-825 ☏ 82-62-220-3815, Fax : 82-62-228-7316 E-mail : sgckim@chosun.ac.kr

Education ●

PhD, Chonnam University, August 1998.

●

MSD (Master of Dental Surgery), Chosun University, February 1992.

●

Bachelor, Chosun University, February 1989.

Career History ●

Visiting Professor at Department of Biomedical Engineering, University of Texas at San Antonio, TX,

●

Previously a Lecturer and presently a Professor, Chosun University, College of Dentistry (May 1996 -

USA (January 2008 - January 2009). present). ●

Chairman of the Department of Oral and Maxillofacial Surgery, Chosun Dental Hospital (September 1999 - present).

●

Director of Oral and Maxillofacial Surgery, Chosun University, College of Dentistry (September 1999 - present).

●

Captain in dental examination and treatment, Chosun Dental Hospital (May 2007 - December 2007).

●

Vice-Dean of the College of Dentistry (June 2004 - August 2005).

●

Captain in Education, Chosun Dental Hospital (September 2001 - June 2004).

Leadership Activities ●

Congress Chairman for the 3rd International Congress of Oral Implantologists Korea (2007).

●

Congress Chairman at the Korean Academy of Oral and Maxillofacial Implantology (2006).

●

Congress Chairman for the Korean Association of Maxillofacial Plastic and Reconstructive Surgeons (2004).

Career-related Activities ●

Member of many professional organizations: International Congress of Oral Implantologists (ICOI), the Academy of Osseointegration, the European Association for Osseointegration, the American Association of Oral and Maxillofacial Surgeons, the International Association of Oral and Maxillofacial Surgeons, the American College of Oral Maxillofacial Surgeons, Society for Biomaterials, the Official Journal of The Asian Association of Oral and Maxillofacial Surgeons, the Academy of Laser Dentistry, the International Association of Dental Research, the Korean Association of Maxillofacial Plastic and Reconstructive Surgeons, the Korean Cleft lip and Palate Association, and the Korea Dental Society of Anesthesiology.

Career-related Activities (continued) ●

Noted in the “Noteworthy Name Dictionary” (biographies of educators and researchers from around the world and from every significant field of endeavors) 37 times; Marquis Who’s Who in the World (2004 - 2009), Marquis Who’s Who in Medicine and Healthcare (2004 - 2007), Marquis Who’s Who in Science and Engineering (2005 - 2009), Marquis Who’s Who in Asia (2006 - 2007), the International Biographical Centre (2004 - 2008), and the American Biographical Institute (ABI) (2004 - 2008).

●

Member of WR Laney Award Committee (Academy of Osseointegration).

Creative Works ●

Published over 463 publications in scientific journals (386) and books (77). These titles include: “Osteogenic activity of the mixture of chitosan and particulate dentin” which was published in J Biomed Mater Res A (2008).

● ●

Editor-in-Chief in Journal of Korean Implant Dentistry (January 2007 - present) Reviewed for the following journals: 1) Biomaterials, 2) World Journal of Surgical Oncology, 3) Oral Oncology, 4) Journal of Nanoscience and Nanotechnology, 5) Computer Methods and Programs in Biomedicine, 6) Asian Journal of Oral and Maixllofacial Surgery, 7) MATERIAIS 2007, 8) Journal of Biomedical Materials Research: Part B - Applied Biomaterials, 9) European Journal of Dentistry, 10) Acta Stomatologica Croatica (ASCRO), 11) Archives of Oral Biology, 12) European Journal of Dentistry, 13) Indian Journal of Cancer, 14) Journal of Korean Maxillofacial Plastic and Reconstructive Surgery, and 15) Korean Academy of Oral and Maxillofacial Implantology.

●

Editorial board in Institute of Medical Science, Chosun University (2008 -present ).

●

Funded ($1,300,000) through government and companies.

Honors ●

Numerous national and international prizes, medals, and honours.

●

64 awards including a Lifetime Achievement One Hundred from the International Biographical Centre (IBC, 2004, 2005, 2006), a Presidential Award (scholarship for research) from the Korean Health Industry Development Institute (2003).

Achievements ●

1 international patent, 21 domestic patents.

●

Restorative and grafting material for hard tissue defect and fabrication method using animal teeth.

CONTENTS... Part.

Dentis Implant System Selection Guide Ⅰ. Dentis Implant System Selection Guide Ⅱ. Characteristics of Dentis Implant System Ⅲ. Uses of Dentis Abutment System Ⅳ. Components of Dentis Products Ⅴ. Dentis Surgical Kit Ⅵ. Surgical Kit and Tool Ⅶ. Abutment Prosthetic Protocol

Part.

Clinical Cases

126 130 134 138 141 144 147 150 152 155 158 162 165 167 170 173 176 179 182

12 17 25 31 83 91 99

1. Maxillary anterior teeth 2. Sinus lift (1) Sinus lift (2) Sinus lift (3) Sinus lift (4) Sinus lift (5) Sinus lift (6) Sinus lift (7) 3. Maxillary posterior teeth (1) Maxillary posterior teeth (2) 4. Mandibular anterior teeth 5. Mandibular posterior teeth (1) Mandibular posterior teeth (2) Mandibular posterior teeth (3) Mandibular posterior teeth (4) 6. Guided bone regeneration (GBR) 7. Overdenture (1) Overdenture (2) 8. Horizontal alveolar bone distraction using a distractor

Part.

Published Articles Implant placement using the SAVE implant Restoration of a partial edentulous ridge with a Dentis implant: A case report Effect of vertical distraction osteogenesis using a nitrified distractor on the osseointegration of Dentis implants INDEX

191 197 203 210

Part.

Dentis Implant System Selection Guide

Dentis Implant System Selection Guide Part

â&#x2026;

1. Fixture System Selection Guide 2. Abutment System Selection Guide

Ⅰ. Dentis Implant System Selection Guide 1. Fixture System Selection Guide ● INTERNAL

● SUBMERGED

● INTERNAL

ø4.8 ø3.7

0.65㎜ 2.0㎜

ø3.5

0.4㎜

0.7㎜

ø3.0

ø2.8

ø3.7

ø3.7 / Length : 8, 10, 12, 14mm

ø3.5 / Length : 8, 10, 12, 14mm

ø4.3

ø4.8 0.65㎜ 2.0㎜

ø4.1

0.4㎜

0.7㎜

L L

ø3.6

ø3.4

ø3.6 ø4.3

ø4.3 / Length : 8, 10, 12, 14mm

ø4.1 / Length : 8, 10, 12, 14mm

ø4.8

ø4.8 0.65㎜ 2.0㎜

ø5.1

0.4㎜

0.7㎜

L L

ø4.1

ø4.4

ø4.1 ø4.8

ø4.8 / Length : 8, 10, 12, 14mm

ø5.1 / Length : 8, 10, 12, 14mm

● SAVE Internal

ø5.5 Int.

● SAVE Submerged

ø6.0 Int.

ø5.5 Sub.

ø6.0 Sub. Part

ø6.0 0.65㎜

ø6.0

2.0㎜

0.65㎜ 2.0㎜

7.0㎜

ø6.0

ø5.5 0.4㎜

0.4㎜

7.0㎜

ø4.8 ø4.8

ø5.3

ø5.5

Length : 7mm ø6.0 0.65㎜

Length : 7mm ø6.0

2.0㎜

0.65㎜ 2.0㎜

8.0㎜

ø5.5 0.4㎜

ø6.0 0.4㎜

8.0㎜

ø4.8 ø4.8

ø5.3

ø5.5

Length : 8mm ø6.0 0.65㎜

Length : 8mm ø6.0

0.65㎜ 2.0㎜

2.0㎜

ø5.5 0.4㎜

ø6.0 0.4㎜

10.0㎜

ø4.8 ø4.8

ø5.3

ø5.5

Length : 10mm

Length : 10mm ø6.0

ø6.0 0.65㎜ 2.0㎜

0.65㎜ 2.0㎜

ø5.5

ø6.0

0.4㎜

12.0㎜

ø5.3

ø4.8 ø4.8 ø5.5

ø5.3

Length : 12mm

Ⅰ. Dentis Implant System Selection Guide ｜

2. Abutment System Selection Guide ● Fixture

● Abutment

● Gold Cylinder

Solid 4mm

Healing Abutment

5.5mm

7mm

4mm

Solid Abutment

5.5mm

7mm

Excellent Solid Abutment

InOcta Cover Screw Free Abutment

InOcta Abut.

Angled Abutment (15°. 25°)

SynOcta Abut.

Gold UCLA

Octa

N-Octa

Gold Cylinder Octa

N-Octa

Gold UCLA

N-Hex

Octa Octa Abutment

Internal Fixture

Sole 4.5mm Healing Abutment

5.5mm Sole Abutment

6.5mm

Couple Cover Screw Free Abutment

Couple Abutment

Angled Abutment (15°. 25°)

Hex

Sub-Octa Submerged Fixture

Healing Cover Screw Abutment

Sub-Octa Abutment

Gold Cylinder Octa

N-Octa

Cemented Cemented Abutment

Angled Abutment (15°. 25°)

Gold UCLA

Hex

N-Hex

Mount

Estheticone

External Fixture

Estheticone Abutment

Gold Cylinder Hex

N-Hex

● Plastic Cylinde / Coping

● Impression Coping / Cap

● Lab Analog

● O-ring

Part O-Ring

Plastic Coping

Single

Bridge

Impression Cap Pick-Up

Positioning Cylinder

Shoulder Analog & Pin

Lab Analog

Retainer

Impression Coping Transfer

Octa

Lab Analog Pick-Up

Lab Analog

Impression Coping Transfer

N-Octa

Plastic Cylinder

Octa

N-Octa

Lab Analog

Abutment

O-Ring

Plastic Coping Single

Impression Cap

Bridge Pick-Up

Lab Analog

Retainer

Impression Coping Transfer

Hex

N-Hex

Pick-Up

Hex

N-Hex

Lab Analog

Impression Coping Transfer

N-Hex

Plastic Cylinder

Octa

Lab Analog

N-Octa Pick-Up

Abutment

Impression Coping Transfer

O-Ring

Plastic UCLA

Hex

N-Hex

Hex

N-Hex

Hex

Pick-Up

Plastic Cylinder

Hex

N-Hex

Lab Analog

Retainer

Impression Coping Transfer

Lab Analog

Abutment

Lab Analog

Ⅰ. Dentis Implant System Selection Guide ｜

Characteristics of Dentis Implant System Part

â&#x2026;Ą

1. Surface Treatment 2. Advantage of RBM(Resorbable Blast Media) 3. Cleaning System 4. Results of the cleaning 5. Characteristics of Dentis Implant

â&#x2026;Ą. Surface treatment & Cleaning 1. Surface Treatment

Part

2. Advantage of RBM(Resorbable Blast Media)

â&#x2026;Ą. Characteristics of Dentis Implant System ď˝&#x153;

3. Cleaning System

4. Results of the cleaning

Part

â&#x2026;Ą. Characteristics of Dentis Implant System ď˝&#x153;

5. Characteristics of Dentis Implant

1. The 3 types of fixture design can be used in various cases. Its products have been developed to be applied to various clinical cases and provide 3 types of fixture, Internal, External and Submerged for parts that need esthetics and according to the condition of the bone. 2. Convenient Compatibility of Superstructure Dentis Implant is economical to use with the certain products such as Branemark, ITI, Astra, and Swissplus implants. 3. Micro-thread for Bone Loss Prevention Dentis Implant Micro-thread minimizes bone loss, breaking due to internal stress and appropriate stimulus of the cortical bone together with stable initial fixation.

Ă&#x2014; 50 1

4. Taper Design and Rotating Safe Cutting Edge for Smooth Drilling It has been designed for excellent osseointegration as well as excellent initial fixation as it remarkably reduces excessive friction with the bone due to uniform transmission of strength during insertion owing to Dentis fixtureâ&#x20AC;&#x2122; s safe cutting edge that follows the direction of the rotation. The cutting edge is on the whole body of the fixture and has taper design and double thread.

Part

× 5,000 5

5. Optimum RBM Surface Treatment Roughness measurement of the surface is Ra: 1.5~1.8um. This measurement is the most ideal value for osseointegration. 6. External Fixture Mount Used For Impressionand Abutment External Fixture Mount is economical and makes it simple for dental prosthetics. Mount could be used as Impression Coping (Transfer) and Final Abutment, after insertion. 7. Internal/ Internal Submerged Fixture is a No-Mount System During surgery, existing Mount System obstructs the range of vision and the distance between the upper and lower teeth, however Dentis No-mount system can immediately ensure a path during surgery and reduces operation time and attains accurate operation with no effects by the surrounding teeth.

Ⅱ. Characteristics of Dentis Implant System ｜

Uses of Dentis Abutment System Part

â&#x2026;˘

1. Uses of Internal Abutment System 2. Uses of Submerged Abutment System 3. Uses of External Abutment System

â&#x2026;˘. Uses of Dentis Abutment System 1. Uses of Internal Abutment System

Internal 1) Uses of Solid Abutment Generally, it is used when getting the Abutment Level impression of Internal Type and can be used in all cases, single unit and multi unit, to make Cemented Type prosthesis.

2) Uses of Excellent Abutment In molar cases, when abutment is smaller than the size of the prosthesis, it increases the size of the normal solid abutment, and possesses stability.

3) Uses of InOcta Abutment It is used for making SCRP dental prosthesis and in choosing cuff of the abutment to suit the thickness of the gingiva when part of the implant shoulder is being drilled under the gums and getting an impression in the fixture level.

4) Uses of SyncOcta Abutment It can be used in all cases, single unit and multi unit and getting an impression in the fixture level. As all stages of dental prosthesis production is possible in the lab, chair time is reduced. This is Cemented Type and is possible to make SCRP dental prosthesis.

Part

5) Uses of Gold ULCA Abutment It is used when the opposing of surfaces of the teeth of the two jawbones does not come into contact and the dentist makes screw type prosthesis.

6) Uses of Angulated Abutment It is prepared in 15 and 25 degrees and can be used in cases to compensate for the angle and the insertion path is not good.

7) Uses of Octa Abutment It is used when prosthesis requires Screw Type, or cases of multiple unit that does not have a good path.

8) Uses of O-Ring Abutment It is used for over denture.

â&#x2026;˘. Uses of Dentis Abutment System ď˝&#x153;

2. Uses of Submerged Abutment System

Submerged 1) Uses of Sole Abutment Generally, it is used when getting the Abutment Level impression of Submerged Type and can be used in all cases, single unit and multi unit, to make Cemented Type prosthesis.

2) Uses of Couple Abutment It can be used in all cases, single unit and multi unit and getting an impression in the fixture and abutment level. As all stages of dental prosthesis production is possible in the lab, chair time is reduced. This is Cemented Type and is possible to make SCRP dental prosthesis.

3) Uses of Gold UCLA Abutment It is used when the opposing of surfaces of the teeth of the two jawbones does not come into contact and the dentist makes screw type prosthesis.

4) Uses of Angulated Abutment It is prepared in 15 and 25 degrees and can be used in cases to compensate for the angle and the insertion path is not good.

5) O-Ring Abutment It is used for over denture.

3. Uses of External Abutment System

Part

External 1) Uses of Cemented Abutment Generally, it is used when making dental prosthesis of the Cemented Type.

2) Uses of Estheticone Abutment It is used when prosthesis requires Screw Type, or cases of multiple unit that does not have a good path.

3) Uses of Angulated Abutment It is prepared in 15 and 25 degrees and can be used in cases to compensate for the angle and the insertion path is not good.

4) Uses of Gold UCLA Abutment It is used when the opposing of surfaces of the teeth of the two jawbones does not come into contact and the dentist makes screw type prosthesis.

5) O-Ring Abutment It is used for over denture.

â&#x2026;˘. Uses of Dentis Abutment System ď˝&#x153;

Components of Dentis Products Part

â&#x2026;Ł

1. Dentis Internal Implant System Flow 2. Dentis Submerged Implant System Flow 3. Dentis External Implant System Flow 4. Dentis SAVE Submerged Implant System Flow 5. Dentis SAVE Internal Implant System Flow

Ⅳ. Components of Dentis Products 1. Dentis Internal Implant System Flow Internal Fixture

Micro-Thread for Bone Loss Prevention It prevents water absorption of the cortex due to bacterial infection and minimizes bone loss, breaking due to internal stress and stimulus of the cortical bone with stable initial fixation strength and wedges in thin cortex as well. RBM Surface Treatment (1.5-1.8um) It maximizes osseointegration. × 5,000 Safe cutting edge It minimizes resistance of the bone during insertion of the implant and functions to provide safe and smooth insertion. Self-tapping Groove It helps self-tapping during the insertion of the implant and at the same time be the space for bone chips. In addition, boost fixation strength after insertion.

Internal Implant System Products ø4.8

Part ø4.8

Mini

2.0㎜

Implant Diameter

Platform Diameter

ø3.7

ø4.8

ø3.0

Length

Code

8.0mm

DIFM3708

10.0mm

DIFM3710

12.0mm

DIFM3712

14.0mm

DIFM3714

ø3.7

ø4.8

Regular

2.0㎜

Implant Diameter

Platform Diameter

ø4.3

ø4.8

ø3.6

Length

Code

8.0mm

DIFR4308

10.0mm

DIFR4310

12.0mm

DIFR4312

14.0mm

DIFR4314

ø4.3

ø4.8

Wide

2.0㎜

Implant Diameter

Platform Diameter

ø4.8

Length

Code

8.0mm

DIFWR4808

10.0mm

DIFWR4810

12.0mm

DIFWR4812

14.0mm

DIFWR4814

ø4.1 ø4.8

Ⅳ. Components of Dentis Products ｜

Prosthetic Flow Diagrams for Internal Type Implant 1) Solid Abutment System

Single

Bridge

Plasitc Coping

Lab Analog

Impression Caps Positioning Cylinder

Solid Abutment Driver

Shoulder Analog & Pin

Solid Abutment

Excellent Solid Abutment

Cover Screw

Healing Abutment

Internal Fixture

Excellent Solid Abutment Driver

1.2 Hex Driver

Solid Abutment System Closing Screw

Platform Diameter

Cuff

Code No.

Ø4.8

0mm

DICS3

Part

Cover Screw

Platform Diameter

Cuff

Code No.

Ø4.8

2mm

DICS1

Platform Diameter

Cuff

Code No.

Ø4.8

3mm 4mm 5.5mm

DIH30 DIH40 DIH55

Platform Diameter

Length

Code No.

Ø4.8

4mm 5.5mm 7mm

DISA40 DISA55 DISA70

2mm

Healing Abutment

Cuff: 3, 4, 5.5mm

Solid Abutment

L: 4, 5.5, 7m

Ⅳ. Components of Dentis Products ｜

Excellent Solid Abutment

Platform Diameter

Length

Code No.

Ø4.8

4mm 5.5mm 7mm

DIESA40 DIESA55 DIESA70

Platform Diameter

Type

L: 4, 5.5, 7m

Impression Cap

DISICR

Ø4.8

Positioning Cylinder

Platform Diameter Ø4.8

Code No.

Type

Code No. DISIPCR

Solid Abutment System Lab Analog

Platform Diameter

Length

Ø4.8

4mm 5.5mm 7mm

Code No. DISLA40 DISLA55 DISLA70

L: 4, 5.5,7mm

Part

Shoulder Analog & Pin

Platform Diameter

Code No. DIISAR

Ø4.8

Plasitc Coping

Platform Diameter

Type

Code No.

Ø4.8

Single Bridge

DISPS DISPB

Single

Bridge

Ⅳ. Components of Dentis Products ｜

2) InOcta Abutment System

Octa

N-Octa

Free Abutment

Octa

N-Octa

InOcta Abutment

15째

25째

Angled Abutment

Octa

N-Octa

SynOcta Abutment

Octa

N-Octa

Gold UCLA

Lab Analog

Impression Coping(Pick-up)

Impression Coping(Transfer)

Healing Abutment

Cover Screw

Internal Fixture

1.2 Hex Driver

InOcta Abutment System Impression Coping

Platform Diameter

Type

Ø4.8

Pick-Up

Code No. DIPIR

Transfer

DITIR DITIN

Part

Pick-Up

Transfer

Lab Analog

Platform Diameter Ø4.8

Code No. DILA

Ⅳ. Components of Dentis Products ｜

Free Abutment

Platform Diameter

Type

Code No.

Octa N-Octa

DIFAO DIFAN

Octa

N-Octa

InOcta Abutment

Platform Diameter

Type

Cuff

Code No.

Ø4.8

Octa

1mm 2mm 3mm 4mm

DICO10 DICO20 DICO30 DICO40

N-Octa

1mm 2mm 3mm 4mm

DICO10N DICO20N DICO30N DICO40N

6mm

Octa

Cuff:1, 2, 3, 4mm N-Octa

Angled Abutment

15°

25°

Platform Diameter

Type

Code No.

Ø4.8

15° 25°

DIAA15 DIAA25

InOcta Abutment System SynOcta Abutment

Platform Diameter

Type

Ø4.8

Octa N-Octa

Code No. DISOA DISOAN

Octa

Part

N-Octa

Gold UCLA

Octa

Platform Diameter

Type

Ø4.8

Octa N-Octa

Code No. DIGUO DIGUN

N-Octa

Temporary Abutment

Cuff:1, 2, 3mm

Platform Diameter

Type

Cuff

Code No.

Ø4.8

Octa

1mm 2mm 3mm 4mm

DITA10O DITA20O DITA30O DITA40O

N-Octa

1mm 2mm 3mm 4mm

DITA10N DITA20N DITA30N DITA40N

Octa

Cuff:1, 2, 3mm

N-Octa

Ⅳ. Components of Dentis Products ｜

3) Octa Abutment System

Hex

N-Hex

Octa

Gold Cylinder

N-Octa

Plastic Cylinder

Octa Lab Analog

Impression Coping(Transfer)

Impression Coping(Pick-up)

Octa Abutment

Healing Abutment

Cover Screw

Internal Fixture

Octa Abutment Driver

1.2 Hex Driver

Octa Abutment System Octa Abutment

Platform Diameter

Code No. DIOA

Ø4.8

Part

Octa Healing Cap

Platform Diameter

Code No. DIOHC

Ø4.8

Impression Coping

Platform Diameter

Type

Ø4.8

Pick-Up

Code No. DIOIO DIOIN

Transfer

DIOTI DITIN

Pick-Up

Transfer

Ⅳ. Components of Dentis Products ｜

Lab Analog

Platform Diameter

Code No. DIOLA

Ø4.8

Gold Cylinder

Octa

N-Octa

Platform Diameter

Type

Code No.

Ø4.8

Octa N-Octa

DIOGCO DIOGCN

Octa Abutment System Plastic Cylinder

Platform Diameter

Type

Code No.

Ø4.8

Octa N-Octa

DIOPO DIOPN

Part Octa

N-Octa

Ⅳ. Components of Dentis Products ｜

4) O-Ring Abutment System

O-Ring

O-Ring Retainer

O-Ring Lab Analog

O-Ring Abutment Driver

O-Ring Abutment

Healing Abutment

Cover Screw

Internal Fixture

1.2 Hex Driver

O-Ring Abutment System O-Ring Abutment

Abutment Diameter

Cuff

Code No.

Ø3.5

0mm 2mm 4mm

DIORA00 DIORA20 DIORA40

Cuff: 0, 2, 4mm

Part

O-Ring Lab Analog

Code No. DOLA

O-Ring Retainer

Code No. DOR

O-Ring

Code No. ORING

Ⅳ. Components of Dentis Products ｜

2. Dentis Submerged Implant System Flow Submerged Fixture

“Convenient”No Mount System During surgery, existing Mount System obstructs the range of vision and the distance between the upper and lower teeth, however Dentis Nomount system can immediately ensure a path during surgery and reduces operation time and attains accurate operation with no effects from the surrounding teeth. Hex Hex Connection prosthesis is compatible with the superstructure with products of Astra. Tapered design Root Form Design achieved superb initial fixation strength also in places where condition of the bone is not good, makes an easy and stable surgery possible and reduces surgery time. Micro-Thread for Bone Loss Prevention It prevents water absorption of the cortex due to bacterial infection and minimizes bone loss, breaking due to internal stress and stimulus of the cortical bone with stable initial fixation strength and wedges in thin cortex as well. RBM Surface Treatment (1.5-1.8um) It maximizes osseointegration. × 5,000 Safe cutting edge It minimizes resistance of the bone during insertion of the implant and functions to provide safe and smooth insertion. Self-tapping Groove It helps self-tapping during the insertion of the implant and at the same time be the space for bone chips. In addition, boost fixation strength after insertion.

Submerged Implant System Products

Part

ø3.7

ø3.7 0.4㎜

Mini Implant Diameter

Platform Diameter

ø3.7

ø3.0

Length

Code

8.0mm

DSFM3708

10.0mm

DSFM3710

12.0mm

DSFM3712

14.0mm

DSFM3714

ø4.3

Regular

0.4㎜

Implant Diameter

Platform Diameter

ø4.3

ø3.6

Length

Code

8.0mm

DSFR4308

10.0mm

DSFR4310

12.0mm

DSFR4312

14.0mm

DSFR4314

ø4.8

ø4.8 0.4㎜

Wide Implant Diameter

Platform Diameter

ø4.8 ø4.1

ø4.8

Length

Code

8.0mm

DSFW4808

10.0mm

DSFW4810

12.0mm

DSFW4812

14.0mm

DSFW4814

Ⅳ. Components of Dentis Products ｜

Prosthetic Flow Diagrams for Submerged Type Implant 1) Sole Abutment System

Single

Bridge

Plastic Coping

Lab Analog

Impression Cap

Sole Abutment

Healing Abutment

Cover Screw

Submerged Fixture

1.25 Hex Driver

Sole Abutment System Abutment Diameter

Cover Screw

Code No. DSCSM

Part

Healing Abutment

Abutment Diameter

Cuff

Code No.

Ø4.5

1.0mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

DSH4510 DSH4515 DSH4520 DSH4525 DSH4535 DSH4545 DSH4555

Ø5.5

1.0mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

DSH5510 DSH5515 DSH5520 DSH5525 DSH5535 DSH5545 DSH5555

Ø6.5

1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

DSH6515 DSH6520 DSH6525 DSH6535 DSH6545 DSH6555

ø4.5, 5.5, 6.5

2mm Cuff: 1.0, 1.5, 2.0,2.5, 3.5, 4.5, 5.5mm

Ⅳ. Components of Dentis Products ｜

Sole Abutment

Abutment Diameter

Cuff

Length

Code No.

Ø4.5

1.0mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

5.5mm

DSSA4510 DSSA4515 DSSA4520 DSSA4525 DSSA4535 DSSA4545 DSSA4555

5.5mm Cuff: 0.8,1.5,2.0, 2.5, 3.5, 4.5, 5.5mm

Ø5.5

Ø6.5

Impression Cap

1.0mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

5.5mm

DSSA5510 DSSA5515 DSSA5520 DSSA5525 DSSA5535 DSSA5545 DSSA5555 DSSA6515 DSSA6520 DSSA6525 DSSA6535 DSSA6545 DSSA6555

Abutment Diameter

Code No.

Ø4.5

DSIPC45

Ø5.5

DSIPC55

Ø6.5

DSIPC65

Sole Abutment System Lab Analog

Abutment Diameter

Code No.

Ø4.5

DSSLA45

Ø5.5

DSSLA55

Ø6.5

DSSLA65

Part

Plastic Coping

Single

Abutment Diameter

Type

Code No.

Ø4.5

Single Bridge

DSSP45S DSSP45B

Ø5.5

Single Bridge

DSSP55S DSSP55B

Ø6.5

Single Bridge

DSSP65S DSSP65B

Bridge

Ⅳ. Components of Dentis Products ｜

2) Couple Abutment System

Hex

N-Hex

Hex

Free Abutment

N-Hex

15째

25째

Hex

Angled Abutment

Couple Abutment

N-Hex

Gold UCLA Abutment

Lab Analog

Hex

N-Hex

Impression Coping(Pick-up)

Healing Abutment

Cover Screw

Submerged Fixture

N-Hex

Impression Coping(Transfer)

1.25 Hex Driver

Couple Abutment System Healing Abutment(Free Abutment) ø4.5

Abutment Diameter Ø4.5

ø4.5 4.5mm

2.5mm

Ø5.5

Cuff

Code No.

0.8mm

DSFH4525 DSFH4545

0.8mm

DSFH5525 DSFH5545

Part ø5.5 ø5.5 4.5mm

2.5mm

Impression Coping

Abutment Diameter

Type

Ø4.5

Pick-Up

Ø5.5

Pick-Up

Hex

Ø6.5

N-Hex

Pick-Up

Length

Code No.

Hex

Long Short

DSIH45L DSIH45S

N-Hex

Long Short

DSIN45L DSIN45S

Hex

Long Short

DSIH55L DSIH55S

N-Hex

Long Short

DSIN55L DSIN55S

Hex

Long Short

DSIH65L DSIH65S

N-Hex

Long Short

DSIN65L DSIN65S

Length

Code No.

Hex

Long Short

DSITH45L DSITH45S

N-Hex

Long Short

DSITN45L DSITN45S

Hex

Long Short

DSITH55L DSITH55S

N-Hex

Long Short

DSITN55L DSITN55S

Hex

Long Short

DSITH65L DSITH65S

N-Hex

Long Short

DSITN65L DSITN65S

Pick-Up

Impression Coping

Abutment Diameter

Type

Ø4.5

Transfer

Ø5.5

Transfer

Hex

Ø6.5

Transfer

N-Hex

Transfer

Ⅳ. Components of Dentis Products ｜

Code No.

Lab Analog

DSCLA

Free Abutment

Abutment Diameter

Type

Code No.

Ø4.5 Ø5.5

Hex

DSFA45H DSFA55H

Ø4.5 Ø5.5

N-Hex

DSFA45N DSFA55N

N-Hex

Hex

Couple Abutment

Type

Abutment Diameter

Cuff

Hex

Ø4.5

1.0mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

Ø5.5

Hex

Cuff

Ø6.5 N-Hex

N-Hex

Ø4.5

Ø5.5

Ø6.5

1.0mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm 1.0mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm 1.0mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

Length

Code No.

5.5mm

DSCA4510H DSCA4515H DSCA4520H DSCA4525H DSCA4535H DSCA4545H DSCA4555H

5.5mm

DSCA5510H DSCA5515H DSCA5520H DSCA5525H DSCA5535H DSCA5545H DSCA5555H

5.5mm

DSCA6515H DSCA6520H DSCA6525H DSCA6535H DSCA6545H DSCA6555H

5.5mm

DSCA4510N DSCA4515N DSCA4520N DSCA4525N DSCA4535N DSCA4545N DSCA4555N DSCA5510N DSCA5515N DSCA5520N DSCA5525N DSCA5535N DSCA5545N DSCA5555N DSCA6515N DSCA6520N DSCA6525N DSCA6535N DSCA6545N DSCA6555N

Couple Abutment

Type

Abutment Diameter

Cuff

Hex

Ø4.5

1.0mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

Ø5.5

Hex

Cuff

1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

Ø6.5 N-Hex

N-Hex

1.0mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

Ø4.5

1.0mm 1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

Ø5.5

1.5mm 2.0mm 2.5mm 3.5mm 4.5mm 5.5mm

Ø6.5

Angled Abutment

7mm

DSCA5510H7 DSCA5515H7 DSCA5520H7 DSCA5525H7 DSCA5535H7 DSCA5545H7 DSCA5555H7

DSCA4510N7 DSCA4515N7 DSCA4520N7 DSCA4525N7 DSCA4535N7 DSCA4545N7 DSCA4555N7

7mm

DSCA5510N7 DSCA5515N7 DSCA5520N7 DSCA5525N7 DSCA5535N7 DSCA5545N7 DSCA5555N7

7mm

DSCA6515N7 DSCA6520N7 DSCA6525N7 DSCA6535N7 DSCA6545N7 DSCA6555N7

Code No.

Ø4.5

15°

2mm 4mm

DSAA45152 DSAA45154

25°

2mm 4mm

DSAA45252 DSAA45254

15°

2mm 4mm

DSAA55152 DSAA55154

25°

2mm 4mm

DSAA55252 DSAA55254

15°

2mm 4mm

DSAA65152 DSAA65154

25°

2mm 4mm

DSAA65252 DSAA65254

Abutment Diameter

Part

DSCA6515H7 DSCA6520H7 DSCA6525H7 DSCA6535H7 DSCA6545H7 DSCA6555H7

Length

25°

Hex

7mm

DSCA4510H7 DSCA4515H7 DSCA4520H7 DSCA4525H7 DSCA4535H7 DSCA4545H7 DSCA4555H7

Cuff

Ø6.5

Gold UCLA

Code No.

Abutment Diameter

Ø5.5

15°

Length

Type

Code No.

Hex

DSGCH

N-Hex

DSGCN

N-Hex

Ⅳ. Components of Dentis Products ｜

3) Sub-Octa Abutment System

Hex

N-Hex

Octa

Gold Cylinder

N-Octa

Plastic Cylinder

Octa Lab Analog

Impression Coping(Transfer)

Impression Coping(Pick-up)

Sub Octa Abutment

Healing Abutment

Cover Screw

Submerged Fixture

Octa Abutment Driver

1.25 Hex Driver