MECHANICAL DESIGN

Page 1

FAB ACADEMY 2012 FĂŠlix Libio

Mechanical design


this week we will construct the mechanical part of the MTM This work was done with my partner Henry, we choose the MTM


1. machining part of the machine.

1. assembly of the machine

1. Mechanically operating shaft


machining part of the machine.


http://mtm.cba.mit.edu/machines/mtm_snap-lock/build/

1. Download dxf.


1. in the program autocad gauge the size of the material and layers 2. exportar in dxf


1. 2. 3. 4.

open the file partworks generate the cutting. the material for the machine is mdf 12 mm Fresa de 3 mm


shopbot


Turn the power switch on the Control Box to the ON position.

This key enables and disables the machine

Push the blue RESET button. You should hear the contactors click on. The Reset button must be pushed every time the Control Box is turned on or after the Estop has been tripped and released.

Start the ShopBot Control Software on your computer. Double-click the ShopBot 3 icon on your computer desktop or go to lower left corner of the screen and select Start > Programs > ShopBot > Sb3. The ShopBot Control windows will appear. The left toggle switch in the red Position window should be set up to Move/Cut, not down to Preview mode.


Set zero for the X, Y and Z axes? – Go to page 2 “Homing the Tool”. Run a cutting file? - Go to page 3 “Load and Run a ShopBot Part File”. Just start the router/spindle 1. Type “K” to enter keypad mode if not already in keypad mode. Use the arrow keys on your computer to move the Z-axis. 2. Turn on Output #1 by holding down the Alt key and pressing the 1 key or click the Output #1 switch on the yellow keypad. This enables operation of the router/spindle. 3. Push the green Start button on the side of the ShopBot Control Box. 4. To turn off router and leave keyboard mode, Esc. To turn off router but stay in keyboard mode to move tool, type Alt-1 or click the Output #1 switch.


piece cut by the machine


assembly of the machine


1. put the pieces 2. observing the blue mtm pitched the mdf Mtm


1. the machine is built. 2. the material is most appropriate because the connections are broken


Mechanically operating shaft


1. AFTER BUILDING THE MACHINE HAS ACHIEVED SO OPERATE MECHANICAL AXES



Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.