Turnover Knives, Profile Knives, Knives
Product
Page
Turnover Knives, Profile Knives
1-1
Turnover Spurs
1 - 10
Turnover Knives
1 - 12
centering point
1 - 18
Mini Turnover Knives
1 - 19
Portable Planer Turnover Knives
1 - 21
Radius and Chamfering Turnover Knives / Profile Knives
1 - 22
Profile Knives / Turnover Knives
1 - 31
Profile Turnover Knives
1 - 42
Scraper Turnover Knives / Knives
1 - 45
Cup Knives
1 - 52
Saw Teeth
1 - 53
Planing Knives
1 - 54
Blanks
1 - 60
Turnover Knives, Profile Knives
150511 / 150512 / 150515 / 150516 / 150518 / 150718
Turnover Knives with 2 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι Topline (polished face and micro-ground clearance angle) Ι cutting material: HW Ι HL Board 01 for wood-based panels and plastics Ι HL Board 02 for wood-based panels and plastics Ι HL Board 06 for wood-based panels, plastics, hard and soft woods Ι HW HL Board 05 for woodbased panels, plastics and hard woods Ι HW HL Solid 25 for hard and soft woods Ι HW HL Solid 25 Topline for hard and soft woods
Ι long edge life and optimum cutting quality in solid woods
Ι packing unit: 10 pieces
B
H
S
Ød
wedge
LEUCODUR
7,6 7,5 9,6 10,5 11 12 13 15 15 15,7 17 18 19 20 20 20 20 20 20
12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
55 45 55 55 55 45 55 55 45 55 55 55 55 55 55 55 55 45 45
HL Board 05 HL Solid 25 HL Board 05 HL Board 05 HL Board 05 HL Solid 25 HL Board 05 HL Board 05 HL Solid 25 HL Board 05 HL Board 05 HL Board 05 HL Board 05 HL Board 01 HL Board 02 HL Board 06 HL Board 05 HL Solid 25 HL Solid 25 Topline
[mm]
[mm]
[mm]
[mm]
[°]
6–1
Ident-No.
052543 173473 o 171163 162636 162637 173466 o 162638 003081 173467 o 163846 162639 162520 164242 180222 176469 178287 003082 173468 o 176265
Turnover Knives, Profile Knives
150511 / 150512 / 150515 / 150516 / 150518 / 150718
Turnover Knives with 2 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι Topline (polished face and micro-ground clearance angle) Ι cutting material: HW Ι HL Board 01 for wood-based panels and plastics Ι HL Board 02 for wood-based panels and plastics Ι HL Board 06 for wood-based panels, plastics, hard and soft woods Ι HL Board 05 for wood-based panels, plastics and hard woods Ι HL Solid 25 for hard and soft woods Ι HL Solid 25 Topline for hard and soft woods Ι HL Solid 30 for hard and soft woods
Ι long edge lives and optimum cutting quality in solid woods
Ι packing unit: 10 pieces
B
H
S
Ød
L
wedge
LEUCODUR
30 30 30 30 30 30 40 40 40 40 50 50 50 50 50 60 60 60 80 80 100 120
12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 13 13 13 13
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.2 2.2 2.2 2.2
4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
14 14 14 14 14 14 26 26 26 26 26 26 26 26 26 26 26 26 60 60 60 60
55 55 55 55 45 45 55 55 45 45 55 55 55 55 45 55 45 45 55 45 55 55
HL Board 01 HL Board 02 HL Board 06 HL Board 05 HL Solid 25 HL Solid 25 Topline HL Board 02 HL Board 05 HL Solid 25 HL Solid 25 Topline HL Board 01 HL Board 02 HL Board 06 HL Board 05 HL Solid 25 Topline HL Board 05 HL Solid 25 HL Solid 25 Topline HL Board 06 HL Solid 25 Topline HL Board 06 HL Board 06
[mm]
[mm]
[mm]
[mm]
[mm]
[°]
6–2
Ident-No.
180223 176470 178288 003083 173469 o 176266 182191 o 164078 173470 o 176267 180224 176471 178289 003085 176268 003086 173472 o 176269 o 003087 181677 003088 003089
Turnover Knives, Profile Knives
150513 / 150515 150518 / 150718
Turnover Knives with 2 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι Topline (polished face and micro-ground clearance angle) Ι cutting material: HW Ι HL Board 03 for wood-based panels and plastics Ι HL Board 05 for wood-based panels, plastics and hard woods Ι HL Solid 25 Topline for hard and soft woods Ι HL Solid 30 for hard and soft woods
Ι long edge lives and optimum cutting quality in solid woods
Ι packing unit: 10 pieces
B
H
S
Ød
wedge
LEUCODUR
Ident-No.
10,5 12 12 12 17 19
10.5 12 12 12 17 19
1.5 1.5 1.5 1.5 2 2
4 4 4 4 4 4
55 55 55 45 55 55
HL Solid 30 HL Board 03 HL Board 05 HL Solid 25 Topline HL Board 05 HL Board 05
[mm]
[mm]
[mm]
[mm]
[°]
162316 180820 003080 176340 162581 162582
150515
Turnover Knives with 2 cutting edges, end sharpened Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Notes
Ι packing unit: 10 pieces
B
H
S
Ød
wedge
LEUCODUR
7,5 10
12 12
1.5 1.5
4 4
55 55
HL Board 05 HL Board 05
[mm]
[mm]
[mm]
[mm]
[°]
6–3
Ident-No.
167256 165914
Turnover Knives, Profile Knives
150516 / 150513
Turnover Knives with 2 cutting edges, end sharpened Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods Ι HL Board 03 for wood-based panels and plastics
Notes
Ι packing unit: 10 pieces
B
H
S
Ød
L
wedge
LEUCODUR
50 50
12 12
1.7 1.7
4 4
37 37
55 55
HL Board 06 HL Board 03
[mm]
[mm]
[mm]
[mm]
[mm]
[°]
Ident-No.
179994 182456
150515
Turnover Knives with 2 cutting edges and chamfer - HOLZ-HER Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι machines HOLZ-HER Ι for use in edge banding / jointing cutterheads
Ι grinding angle 55 degrees Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
chamfer
Notes
Ι packing unit: 10 pieces
B
H
S
Ød
L
15
29,5
12
1.5
4
14
[°]
[mm]
[mm]
[mm]
[mm]
[mm]
6–4
Ident-No. [L]
Ident-No. [R]
160118
160618
Turnover Knives, Profile Knives
150515
Turnover Knives with 2 cutting edges, edge bevel and end sharpened Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in V-grooving cutterheads and prism cutterheads
Ι grinding angle 55 degrees Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
B
H
S
Ød
L
Frei 1
Frei 2
19,5 29,5 49,2
12 12 12
1.5 1.5 1.5
4 4 4
3.5 5 5
10
14 26
[mm]
[mm]
[mm]
[mm]
[mm]
[°]
[°]
Notes
Ι packing unit: 10 pieces
Ident-No. [L]
Ident-No. [R]
160626 003119 003121
160625 003118 003120
150513 / 150515
Turnover Knives with 2 cutting edges, end sharpened Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in shank-type cutters
Ι cutting material: HW Ι HL Board 02 for wood-based panels and plastics Ι HL Board 03 for wood-based panels and plastics Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
B
H
S
Ød
L
wedge
LEUCODUR
30 30 40 50 50 29,5 29,5 39,5 49,5
9 9 9 9 9 12 12 12 12
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
3,7 3,7 3,7 3,7 3,7 4 4 4 4
14 14 26 26 26 14 14 26 26
55 55 55 55 55 55 55 55 55
HL Board 03 HL Board 05 HL Board 05 HL Board 03 HL Board 05 HL Board 02 HL Board 05 HL Board 05 HL Board 05
[mm]
[mm]
[mm]
[mm]
[mm]
[°]
Notes
Ι packing unit: 10 pieces
6–5
Ident-No.
180807 180821 o 180815 180808 180806 181160 180825 171149 180826
Turnover Knives, Profile Knives
150513
Turnover Knives with 2 cutting edges, end sharpened Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in shank-type cutters
Ι cutting material: HW Ι HL Board 03 for wood-based panels and plastics
Advantages
B
H
S
Ød
L
wedge
50
9
1.5
3,7
37
55
[mm]
[mm]
[mm]
[mm]
[mm]
[°]
Notes
Ι packing unit: 10 pieces
Ident-No.
181982
150515
Turnover Knives with 2 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in hoggers
Ι chip breakers for optimum cut division Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
B
H
S
Ød
wedge
20
12
1.5
4
55
[mm]
[mm]
[mm]
[mm]
[°]
Notes
Ι packing unit: 10 pieces
Ident-No.
055905
6–6
Turnover Knives, Profile Knives
150518
Turnover Knives with 2 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι chip breakers for optimum cut division Ι cutting material: HW Ι HL Solid 25 for hard and soft woods B
H
S
Ød
wedge
15
15
2
4
55
[mm]
[mm]
[mm]
[mm]
[°]
Notes
Ι packing unit: 10 pieces
Ident-No.
167873
150523
Profile Knives with 1 cutting edge, end sharpened Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in shank-type cutters
Ι cutting material: HW Ι HL Board 03 for wood-based panels and plastics
Advantages
B
H
S
Ød
L
wedge
16 28
7 7
1.5 1.5
3,4 3,4
7 14
55 55
[mm]
[mm]
[mm]
[mm]
[mm]
[°]
Notes
Ι packing unit: 10 pieces
Ident-No.
180262 180260
6–7
Turnover Knives, Profile Knives
150515
Turnover Knives with 2 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in Leitz cutterheads
Ι cutting material: HW HL Board 05 for wood-based panels, plastics and hard woods
B
H
S
14,7 19,7 30 35 40 50 60 80
8 8 8 8 8 8 8 8
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
[mm]
[mm]
[mm]
Advantages
Notes
Ident-No.
181504 181505 181506 181507 181508 181509 181510 181511
150518 / 150519
Turnover Knives with 2 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι machines Hundegger Ι for use in cutterheads
Ι cutting material: HW Ι HL Solid 60 for soft woods Ι HL Solid 30 for hard and soft woods
Advantages
Notes
Ι packing unit: 10 pieces
B
H
S
Ød
wedge
LEUCODUR
Ident-No.
21 21
21 21
5.5 5.5
7,3 7,3
40 40
HL Solid 30 HL Solid 60
[mm]
[mm]
[mm]
[mm]
[°]
6–8
180639 180638
Turnover Knives, Profile Knives
150518 / 150519
Turnover Knives with 2 cutting edges and counter sink Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι 0 Ι for use in edge jointing cutterheads Ι for use in spiral cutterheads Ι for use in cutterheads
Notes
Ι packing unit: 10 pieces
B
H
S
Ød
wedge
LEUCODUR
Ident-No.
13,6 14,3 15 15 20
13.6 14.3 15 15 14.3
2 2.5 2.5 2.5 2.5
6,3 6,3 6,2 6,4 6,3
45 55 50 60 55
HL Solid 40 HL Solid 25 HL Solid 25 HL Solid 25 HL Solid 15
[mm]
[mm]
[mm]
[mm]
[°]
6–9
Fischer Brugg Homag Chamfering Cutterhead with rounded edges Homag
163829 170248 181243 180454 168509
Turnover Spurs
150558
Triangular Spur with 3 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in Leitz cutterheads
Ι cutting material: HW Ι HL Solid 25 for hard and soft woods
Advantages
B
H
S
Ød
corner
LEUCODUR
22
19.05
2
6,5
60
HL Solid 25
[mm]
[mm]
[mm]
[mm]
[°]
Notes
Ι packing unit: 10 pieces
Ident-No.
180779
150553 / 150555 / 150759 / 150758
Turnover Spur with 4 cutting edges and counter sink Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in cutterheads
Ι Topline (polished face and micro-ground clearance angle)
Ι long edge life and optimum cutting quality specifically in solid woods thanks to Topline design
Ι Ident-No. 167777 for scoring device of the HOLZ-HER vertical panel sizing saw Ι * marking for easier mounting Ι packing unit: 10 pieces
B
H
S
Ød
wedge
LEUCODUR
Ident-No.
14 14 14 14 14 14
14 14 14 14 14 14
1.2 1.2 2 2 2 2
8,6 8,6 6,3 6,3 6,3 6,3
60 60 60 60 60 60
HL Solid 40 HL Solid 40 HL Solid 25 Topline HL Solid 40 HL Board 05 HL Board 03
[mm]
[mm]
[mm]
[mm]
[°]
6–10
HOLZ-HER
163701 167777 176341 003079 180954 180646
Turnover Spurs
150558
Turnover Spur with 4 cutting edges and counter sink - Lestro Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι machines Lestro Ι for use in cutterheads
Notes
Ι packing unit: 10 pieces
B
H
S
Ød
wedge
LEUCODUR
Ident-No.
10,5
10.5
1.5
4
55
HL Solid 25
[mm]
[mm]
[mm]
[mm]
[°]
Lestro
176719
150558
Turnover Spurs Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι cutting edge with scoring cut Ι cutting material: HW Ι HL Solid 15 for wood-based panels, hard and soft woods
Ι chip-free hole edges thanks to cutting edge with scoring cut
Ι packing unit: 10 pieces
Ident-No.
181263
6–11
Turnover Knives
150518
Turnover Knives HW with 2 cutting edges - Weinig Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in Weinig planing cutterheads Centrolock for planing of glued soft woods, hard woods and MDF
Ι cutting material: HW Ι HL Solid 25 for hard and soft woods
Ι high planing quality and long edge lives
Ι packing unit: 2 pieces
B
H
S
Ident-No.
20 60 80 100 130 150 170 180 190 210 230 240 260 270 310 460
16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
181593 o 181594 o 181595 o 181596 181597 181598 o 181599 181600 o 181601 o 181602 o 181603 o 181604 181605 o 181606 o 181607 o 181608 o
[mm]
[mm]
[mm]
332121
Turnover Knives HS with 2 cutting edges - Weinig Product
Drawing
High Speed Steel [HS]
Machine / Application
Design
Advantages
Notes
Ι for use in Weinig planing cutterheads Centrolock for planing of soft woods
Ι cutting material: HS for soft woods
Ι high planing quality and long edge lives
Ι packing unit: 2 pieces
B
H
S
Ident-No.
20
16
3
181804 o
[mm]
[mm]
[mm]
6–12
Turnover Knives
B
H
S
Ident-No.
60 80 100 130 150 170 180 190 210 230 240 260 270 310 460
16 16 16 16 16 16 16 16 16 16 16 16 16 16 16
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
181805 o 181806 o 181807 o 181808 181809 o 181810 181811 o 181812 o 181813 o 181814 o 181815 181816 o 181817 o 181818 o 181819 o
[mm]
[mm]
[mm]
332751
Turnover Knives SP with 2 cutting edges Product
Drawing
Alloyed Steel
Machine / Application
Design
Ι for use in Tersa planing cutterheads
Ι SP - 13% crome - special steel
Advantages
Notes
B
H
S
Ident-No.
60 70 80 90 100 110 120 130 140 150 160 170 180 185 190 200 210 220 230 240 250 260 265
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
175405 o 175406 o 175407 o 175408 o 175409 o 175410 o 175411 o 175412 o 175413 o 175414 o 175415 o 175416 o 175417 o 175418 o 175419 o 175420 o 175421 o 175422 o 175423 o 175424 o 175425 o 175426 o 175427 o
[mm]
[mm]
[mm]
6–13
Turnover Knives
B
H
S
Ident-No.
270 280 290 300 310 315 320 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540 550 560 570 580 590 600 610 620 630 635 637 640 650
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
175428 o 175429 o 175430 o 175431 o 175432 o 175433 o 175434 o 175435 o 175436 o 175437 o 175438 o 175439 o 175440 o 175441 o 175442 o 175443 o 175444 o 175445 o 175446 o 175447 o 175448 o 175449 o 175450 o 175451 o 175452 o 175453 o 175454 o 175455 o 175456 o 175457 o 175458 o 175459 o 175460 o 175461 o 175462 o 175463 o 175464 o 175465 o 175466 o 175467 o 175468 175469 o
[mm]
[mm]
[mm]
6–14
Turnover Knives
332751
Turnover Knives HS with 2 cutting edges Product
Drawing
High Speed Steel [HS]
Machine / Application
Design
Ι for use in Tersa planing cutterheads
Ι cutting material: HS
Advantages
Notes
B
H
S
Ident-No.
60 70 80 90 100 110 120 130 140 150 160 170 180 185 190 200 210 220 230 240 250 260 265 270 280 290 300 310 315 320 330 340 350 360 370 380 390 400 410 420 430 440
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
175305 o 175306 o 175307 o 175308 o 175309 o 175310 o 175311 o 175312 o 175313 o 175314 o 175315 o 175316 o 175317 o 175318 o 175319 o 175320 o 175321 o 175322 o 175323 o 175324 o 175325 o 175326 o 175327 o 175328 o 175329 o 175330 o 175331 o 175332 175333 o 175334 o 175335 o 175336 o 175337 o 175338 o 175339 o 175340 o 175341 o 175342 o 175343 175344 o 175345 o 175346 o
[mm]
[mm]
[mm]
6–15
Turnover Knives
B
H
S
Ident-No.
450 460 470 480 490 500 510 520 530 540 550 560 570 580 590 600 610 620 630 635 637 640 650
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
175347 o 175348 o 175349 o 175350 o 175351 o 175352 o 175353 175354 175355 o 175356 o 175357 o 175358 o 175359 o 175360 o 175361 o 175362 o 175363 o 175364 o 175365 175366 o 175367 o 175368 175369 o
[mm]
[mm]
[mm]
132751
Turnover Knives HW with 2 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in Tersa planing cutterheads
Ι cutting material: HW tungsten carbide
Advantages
Notes
B
H
S
Ident-No.
60 70 80 90 100 110 120 130 140 150 160 170 180 185 190
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
175205 o 175206 o 175207 o 175208 o 175209 o 175210 o 175211 o 175212 o 175213 o 175214 o 175215 o 175216 o 175217 o 175218 o 175219 o
[mm]
[mm]
[mm]
6–16
Turnover Knives
B
H
S
Ident-No.
200 210 220 230 240 250 260 265 270 280 290 300 310 315 320 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540 550 560 570 580 590 600 610 620 630 635 640 650
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
175220 o 175221 o 175222 o 175223 175224 o 175225 o 175226 o 175227 o 175228 o 175229 o 175230 o 175231 o 175232 o 175233 o 175234 o 175235 o 175236 o 175237 o 175238 o 175239 o 175240 o 175241 o 175242 175243 o 175244 o 175245 o 175246 o 175247 o 175248 o 175249 o 175250 o 175251 o 175252 o 175253 175254 o 175255 o 175256 o 175257 o 175258 o 175259 o 175260 o 175261 o 175262 o 175263 o 175264 o 175265 o 175266 o 175268 o 175269 o
[mm]
[mm]
[mm]
6–17
Centering Point
165512
Centering Points Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι with surface on shank for set screw Ι cutting material: HW Ι HL Solid 40 for hard and soft woods ØD
L1
3
33.5
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
162624
6–18
Mini Turnover Knives
150535
Mini Turnover Knives with 2 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in shank-type cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
B
H
S
12 20 40 50
5.5 5.5 5.5 5.5
1.1 1.1 1.1 1.1
[mm]
[mm]
[mm]
Advantages
Notes
Ι packing unit: 10 pieces
Ident-No.
162670 160623 160674 163572
150535
Mini Turnover Knives with 2 cutting edges, end sharpened Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in shank-type cutters
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
B
H
S
12 20 20 25 30 50
5.5 4.1 5.5 5.5 5.5 5.5
1.1 1.1 1.1 1.1 1.1 1.1
[mm]
[mm]
[mm]
Advantages
Notes
Ι packing unit: 10 pieces
Ident-No.
168696 173480 173481 173793 173482 173483
6–19
Mini Turnover Knives
150535
Mini Turnover Knives with 2 cutting edges, end bevel Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι CNC machining centers Ι for use in shank-type cutters
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
B
H
S
39,8
5.5
1.1
[mm]
[mm]
[mm]
Advantages
Notes
Ι packing unit: 10 pieces
Ident-No.
163211 o
6–20
Portable Planer Turnover Knives
150549
Portable Planer Turnover Knives with 2 cutting edges and edge bevel Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι portable planers
Ι cutting material: HW Ι HL Solid 40 for hard and soft woods
B
H
S
Advantages
Notes
Ι Ident-No. 166381 can only be used in the original ELU clamping element Ι Ident-No. 166080 can only be used in the original Black+Decker clamping element Ι packing unit: 10 pieces
Frei 1
75,5
5.5
1.1
1.5
75,7 80,5
5.5 5.9
1.2 1.2
8 8
82
5.5
1.1
3
102
5.5
1.1
3
[mm]
[mm]
[mm]
[°]
Ident-No.
AEG HTH 75, Bosch 0590, P400, 1590, 1591, Festo REP 75, Haffner FH 222, HOLZ-HER 2223, 2286, 2320, Kress Jet Star 6701, Mafell HU 75, Metabo 6375, Scheer MH 80, MH 75/3, Skil 98 H Black&Decker DN 750 ELU MFF 80 AEG, Fein, Haffner, Hitachi, Mafell, Makita, Metabo, Bosch AEG EH 102, HB 750
6–21
162439 166079 o 166381 165617 419671 o
Radius and Chamfering Turnover Knives / Profile Knives
151545
Radius Profile Knives with 2 cutting radii Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in edge rounding cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
R
B
H
S
Ød
L
2 3 5 4 6 7 8 2 3 4 5 6 7 8
20,5 20,8 30 20,8 30,5 30 30,5 20,8 20,8 20,8 30,5 30,5 30,5 30,5
15 15 17 15 17 17 17 14.7 14.7 14.7 16.5 16.5 16.5 16.5
2 2 2 2 2 2 2 2 2 2 2 2 2 2
3 3 3 3 3 3 3 3 3 3 3 3 3 3
12 12 20 12 20 20 20 12 12 12 20 20 20 20
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
Homag Homag Homag Homag Homag Homag Homag IMA IMA IMA IMA IMA IMA IMA
163062 163063 163065 163064 s 163066 163067 163068 164166 s 164167 s 164168 s 164169 s 164170 s 164171 s 164172 s
151545 / 151585
Radius Profile Knives with 2 cutting radii and bottom chamfer Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in edge rounding cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
Notes
R
B
H
S
Ød
Ident-No.
1,5 2 2
16 12 16
17.5 12 15.5
2 1.5 2
4,4 4 4
176583 170340 182087
[mm]
[mm]
[mm]
[mm]
[mm]
Ι packing unit: 10 pieces
6–22
Radius and Chamfering Turnover Knives / Profile Knives
R
B
H
S
Ød
Ident-No.
2 2,5 3 3 4 5
16 16 12 16 16 16
17.5 17.5 12 17.5 17.5 17.5
2 2 1.5 2 2 2
4,4 4,4 4 4,4 4,4 4,4
163489 171178 170341 163490 163491 163492
[mm]
[mm]
[mm]
[mm]
[mm]
151545 / 151585
Radius Profile Knives with 2 cutting radii Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in edge rounding cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
Notes
R
B
H
S
Ød
Ident-No.
2 2,5 3 6 8 9
12 12 12 24 24 24
13 13 13 22 22 22
2 2 2 2 2 2
5 4 5 4,4 4,4 4,4
177033 173707 177032 170258 170260 170261
[mm]
[mm]
[mm]
[mm]
[mm]
Ι packing unit: 10 pieces
151545 / 151585
Radius Profile Knives with 2 cutting radii and bottom chamfer - IMA, Wilmsmayer, Torwegge Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι machines IMA, Wilmsmayer, Torwegge Ι for use in scraper holders
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
R
B
H
S
Ød
2
16
17.5
2
3
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
173475
6–23
Radius and Chamfering Turnover Knives / Profile Knives
R
B
H
S
Ød
2,5 3 4 5
16 16 16 16
17.5 17.5 17.5 17.5
2 2 2 2
3 3 3 3
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
173476 s 173477 173478 173479
151545 / 151585
Radius Profile Knives with 2 cutting radii and bottom chamfer - Brandt Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι copying-unit Brandt Ι for use in edge rounding cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
Notes
R
B
H
S
Ød
Ident-No.
2 3
16 16
17.5 17.5
2 2
4,4 4,4
180153 180154
[mm]
[mm]
[mm]
[mm]
[mm]
Ι packing unit: 10 pieces
151555
Radius Profile Knives with 2 cutting radii Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in edge banding / rounding cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods Ι 5 degree profile run-out
Advantages
R
B
H
S
Ød
2 3 4
13 13 13
16 16 16
2 2 2
4 4 4
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
162794 162795 162565
6–24
Radius and Chamfering Turnover Knives / Profile Knives
151555
Radius Profile Knives with 2 cutting radii - IMA Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι machines IMA Ι for use in edge banding / rounding cutterheads
Ι 15 degree profile run-out Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
R
B
H
S
Ød
2 3 4
13 13 13
16 16 16
2 2 2
4 4 4
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
172713 172714 172715
151555
Radius Profile Knives with 2 cutting radii Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in edge banding / rounding cutterheads
Ι 5 degree profile run-out Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
R
B
H
S
Ød
5 6 7 8 9 10 11 12
20 20 20 20 26 26 26 26
21 21 21 21 24 24 24 24
2 2 2 2 2 2 2 2
4 4 4 4 4 4 4 4
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
162566 162567 162568 162569 162796 162570 162571 162572
6–25
Radius and Chamfering Turnover Knives / Profile Knives
151555
Radius Turnover Knives with 2 cutting radii Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in edge rounding cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
R
B
H
S
Ød
3 2 2,5 3
20 30 30 30
16 14 14 14
2 2 2 2
3 4 4 4
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Reich Reich Reich
Ident-No. [L]
Ident-No. [R]
168355 177136 177138 177140
168356 177135 177137 177139
151545
Radius Profile Knives with 1 cutting radius Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in edge rounding cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
R
B
H
S
Ød
2 2 2 2 2,5 3 3 3 3
12 15 16,1 19,6 15 12 15 16,1 19,6
18 14.5 14 15.2 14.5 18 14.5 14 15.2
2 2 2 2 2 2 2 2 2
4 4 4 4 4 4 4 4 4
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No. [L]
177317 178219 173817 177319 177321 178221 173393
6–26
Ident-No. [R]
172725 177318 178218 173816 177320 172726 177322 178220 173392
Radius and Chamfering Turnover Knives / Profile Knives
151545
Radius Profile Knives with 1 cutting radius Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in edge rounding cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
R
B
H
S
Ød
2 2,5 3
12 12 12
14.5 14.5 14.5
2 2 2
4 4 4
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No. [L]
Ident-No. [R]
172142 171224 172144
172141 171223 172143
151545
Radius Profile Knives with 1 cutting radius Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι for use in rounding cutterheads Ι 5 degree profile run-out Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods R
B
H
S
Ød
3 4 5 6 8 9 10 12
15 15 15 15 15 20 20 20
18.4 18.4 18.4 21.6 21.6 25.8 25.8 25.8
2 2 2 2 2 2 2 2
4 4 4 4 4 4 4 4
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No. [L]
168272 168273 168274 168286 168288 168301 # 168302 s 168304 s
6–27
Ident-No. [R]
168279 168280 168281 168293 168295 168310 # 168311 s 168313
Radius and Chamfering Turnover Knives / Profile Knives
151545
Radius Profile Knives with 1 cutting radius Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι 10 degree profile run-out Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods Ι HL Board 06 for wood-based panels, plastics and soft woods
Notes
Ι packing unit: 10 pieces
R
B
H
S
Ød
LEUCODUR
1,5 2 2 3 4 5
13 12 13 13 14 15
15 15 15 15 17 17
2 2 2 2 2 2
4 4 4 4 4 4
HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 05 HL Board 05
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No. [L]
Ident-No. [R]
181954 177034 181956 181957 177036 177037
181953 177038 181955 181958 177040 177041
151545
Radius Profile Knives with 1 cutting radius - Homag Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι machines Homag Ι 5 degree profile run-out Ι for use in rounding cutterheads Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods R
B
H
S
Ød
L
10 12
21,8 21,8
20 20
2 2
3 3
12 12
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
6–28
Ident-No. [L]
Ident-No. [R]
163071 163075
163072 163076
Radius and Chamfering Turnover Knives / Profile Knives
151545
Radius Profile Knives with 1 cutting radius - IMA Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι for use in rounding cutterheads Ι 5 degree profile run-out Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Notes
Ι packing unit: 10 pieces
R
B
H
S
Ød
L
Ident-No. [L]
9 10 11 12
21,8 21,8 21,8 21,8
19.5 19.5 19.5 19.5
2 2 2 2
3 3 3 3
12 12 12 12
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
164173 s 164175 s 164177 s 164179 s
Ident-No. [R]
164174 s 164176 s 164178 s 164180 s
151545
Radius Profile Knives with 1 cutting radius - IMA Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι 15 degree profile run-out Ι machines IMA Ι for use in rounding cutterheads Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods R
B
H
S
Ød
2 3
12 12
18 18
2 2
5 5
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
6–29
Ident-No. [L]
Ident-No. [R]
180174 180176
180173 180175
Radius and Chamfering Turnover Knives / Profile Knives
151545
Chamfering Profile Knives with 2 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in edge rounding cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
Notes
chamfer
B
H
S
Ød
Ident-No.
45 45 45 45
12 12 16 16
12 12 17.5 17.5
1.5 1.5 2 2
4 4 3 4,3
180792 171190 169292 170329
[°]
[mm]
[mm]
[mm]
[mm]
Ι Ident-No. 180792 for Modula Ι packing unit: 10 pieces
151545 / 151546
Chamfering Profile Knives with 1 cutting edge Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι machining centers Homag Ι for use in chamfering cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods Ι HL Board 06 for wood-based panels, plastics and soft woods
Advantages
chamfer
B
H
S
Ød
LEUCODUR
15 30 45 5 45
12 13,5 15 12 12
16 16 16 16 16
2 2 2 2 2
4 4 4 5 4
HL Board 05 HL Board 05 HL Board 05 HL Board 06 HL Board 05
[°]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
6–30
Ident-No. [L]
177042 177043 177044 s 179174 177823
Ident-No. [R]
177045 177046 177047 s 179173 177822
Profile Knives / Turnover Knives
151519
Profile Turnover Knives for alucobond - HOLZ-HER Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι vertical panel sizing saws Ι cutting material: HW HOLZ-HER Ι HL Solid 40 for hard and soft Ι for use in 90 degree Folding woods cutterhead Ident-No. 879632 for the machining of alucubond B
H
S
Ød
14
14
2
6,3
90
[mm]
[mm]
[mm]
[mm]
[°]
Notes
Ι packing unit: 10 pieces
Ident-No.
182079
151516
Profile Turnover Knives for alucobond - HOLZ-HER Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι vertical panel sizing saws Ι cutting material: HW HOLZ-HER Ι HL Board 06 for wood-based Ι for use in 135 degree Folding panels, plastics and soft woods cutterhead Ident-No. 703144 for the machining of alucubond B
H
S
Ød
20
18
2
5,7
135
[mm]
[mm]
[mm]
[mm]
[°]
Notes
Ι packing unit: 10 pieces
Ident-No.
182080 s
6–31
Profile Knives / Turnover Knives
151586
Profile Knives - Brandt Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι edge banding machines Brandt Ι cutting material: HW HL Board since date of fabrication 2005 06 for wood-based panels, Ι for use in rounding cutterheads plastics and soft woods with special chip removing design R
B
H
S
Ød
2 2,5 3
22,32 22,32 22,32
14 14 14
2 2 2
5 5 5
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No. [L]
Ident-No. [R]
182331 182367 182333
182332 182368 182334
151.586
Profile Knives - Brandt Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι edge banding machines Brandt Ι cutting material: HW since date of fabrication 2005 Ι HL Board 06 for wood-based Ι for use in rounding cutterheads panels, plastics and soft woods with special chip removing design chamfer
B
H
S
Ød
45
22,32
14
2
5
[°]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
6–32
Ident-No. [L]
Ident-No. [R]
182667
182666
Profile Knives / Turnover Knives
150515 / 151545
Modula Knives Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in ornamental groove cutterheads
Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
B
H
S
Ød
12 12 11 11 12 11
12 12 12 12 12 12
1.5 1.5 1.5 1.5 1.5 1.5
4 4 4 4 4 4
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
003080 171177 171175 171172 171216 171173
151548
Profile Knives Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in stile-and-rail profile cutterheads
Ι cutting material: HW Ι HL Solid 25 for hard and soft woods
Advantages
R
B
H
S
Ød
L
4,5 4,5
16,3 19,3
24.5 24.5
2 2
3,5 3,5
8,3 11,2
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
166126 # 165912
6–33
Profile Knives / Turnover Knives
R
B
H
S
Ød
L
6,5
16,3
24.5
2
3,5
8,3
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
166127
151548
Profile Knives Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in stile-and-rail profile cutterheads
Ι cutting material: HW Ι HL Solid 25 for hard and soft woods
Advantages
R
B
H
S
Ød
7
13,3
24.5
2
3,5
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
L
Ident-No.
167469 [mm]
151548
Profile Knives Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in panel-raising cutterheads
Ι cutting material: HW Ι HL Solid 25 for hard and soft woods
Advantages
Notes
R
B
H
S
Ød
L
Ident-No.
4,5
19
25
2
3,5
9
165930
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ι packing unit: 10 pieces
6–34
Profile Knives / Turnover Knives
151548
Profile Knives Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in panel-raising cutterheads
Ι cutting material: HW Ι HL Solid 25 for hard and soft woods
Advantages
Notes
R
B
H
S
Ød
L
Ident-No.
5
19
25
2
3,5
9
165932
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ι packing unit: 10 pieces
151548
Panel Raising Profile Knives Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in shank-type panel raising cutterheads
Ι cutting material: HW Ι HL Solid 25 for hard and soft woods
Advantages
R
B
H
S
Ød
4,5
16
22.5
2
4
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
168883
6–35
Profile Knives / Turnover Knives
151548
Miter Glue Joint Profile Knives Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in miter glue joint cutterheads
Ι cutting material: HW Ι HL Solid 25 for hard and soft woods
Ι very accurate profiling for optimum glue joints
Ι packing unit: 10 pieces
chamfer
B
H
S
Ød
L
86
39,5
12
1.5
4
26
[°]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
165916
151558
Glue Joint Profile Turnover Knives Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in glue joint cutterheads Ι cutting material: HW Ι HL Solid 25 for hard and soft woods B
H
S
Ød
L
50
21.6
2
4
26
[mm]
[mm]
[mm]
[mm]
[mm]
Advantages
Notes
Ι very accurate profiling for optimum glue joints
Ι packing unit: 10 pieces
Ident-No.
165911
6–36
Profile Knives / Turnover Knives
151558
Glue Joint Profile Turnover Knives Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in glue joint cutterheads Ι cutting material: HW Ι HL Solid 25 for hard and soft woods B
H
S
Ød
L
60
21.6
2
4
32
[mm]
[mm]
[mm]
[mm]
[mm]
Advantages
Notes
Ι very accurate profiling for optimum glue joints
Ι packing unit: 10 pieces
Ident-No.
165909
151598
Glue Joint Profile Turnover Knive Set Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in adjustable glue joint cutterheads
Ι cutting material: HW Ι HL Solid 25 for hard and soft woods
Ι very accurate profiling for optimum glue joints
Ι set consists of 4 pieces Ident-No. 167977, 4 pieces Ident-No. 167976 Ι packing unit: 10 pieces
B
H
S
Ød
L
42
20
2
4
26
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
168240
6–37
Profile Knives / Turnover Knives
132891
Turnover Knive Holders - Ledinek Rotoles Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι planing machines Ledinek Rotoles Ι for LEUCODUR turnover knives straight and with chamfer
Ι for mounting of LEUCODUR turnover knives 14 x 14 mm and 14.3 x 14.3 mm
Advantages
Notes
Ident-No.
for thicknesser (TOK 14x14x2) top for service planing rotor (TOK 14x14x2) bottom for thicknesser segments (TOK 14,3x14,3x2,5) top für Abrichtrotor Segmente (WPL 14,3x14,3x2,5) unten
Spare parts
Countersunk Flat Headed Screws
182082 o 182083 o 182084 o 182085 o
Dimension
Class-No.
M5x9 T20 D=Ø9,3
995125
Ident-No.
827277
[mm]
150553 / 150555 / 150558 / 150559
Profile Turnover Knives with 4 cutting edges - Ledinek Rotoles Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι planing machines Ledinek Rotoles Ι for use in turnover knive holders zum Planfräsen
Ι cutting material: HW Ι HL Board 03 for wood-based panels and plastics Ι HL Board 05 for wood-based panels, plastics and hard woods Ι HL Solid 15 for wood-based panels, hard and soft woods Ι HL Solid 40 for hard and soft woods
B
H
S
LEUCODUR
14 14 14
14 14 14
2 2 2
HL Solid 40 HL Board 05 HL Board 03
[mm]
[mm]
[mm]
Advantages
Notes
Ι packing unit: 10 pieces
Ident-No.
003079 180954 180646
6–38
Profile Knives / Turnover Knives
B
H
S
LEUCODUR
14,3
14.3
2.5
HL Solid 25
[mm]
[mm]
[mm]
Ident-No.
170248
150558
Profile Turnover Knives with 4 cutting edges and chamfer - Ledinek Rotoles Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι planing machines Ledinek Rotoles Ι for use in turnover knive holders zum Planfräsen
Ι cutting material: HW Ι HL Solid 15 for wood-based panels, hard and soft woods Ι HL Solid 25 for hard and soft woods
Advantages
Notes
Ι packing unit: 10 pieces
B
H
S
LEUCODUR
14 14,3
14 14.3
2 2.5
HL Solid 25 HL Solid 15
[mm]
[mm]
[mm]
Ident-No. [L]
Ident-No. [R]
180933 181144
180932 181143
150558
Profile Turnover Knives with 4 cutting edges and radius - Ledinek Rotoles Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι planing machines Ledinek Rotoles Ι for use in turnover knive holders zum Planfräsen
Ι cutting material: HW Ι HL Solid 15 for wood-based panels, hard and soft woods Ι HL Solid 25 for hard and soft woods
Advantages
Notes
Ι packing unit: 10 pieces
B
H
S
LEUCODUR
14 14,3
14 14.3
2 2.5
HL Solid 25 HL Solid 15
[mm]
[mm]
[mm]
6–39
Ident-No. [L]
Ident-No. [R]
182442 182444
182441 182443
Profile Knives / Turnover Knives
151527
SuperProfiler Knives „Multi-Profil“ Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι table shapers Ι for use in SuperProfiler cutterheads Ident-No. 167897 and 167894
Ι cutting material: HW Ι HL Solid 25 for hard and soft woods
Advantages
Notes
Ι for cutting of various profiles in one or more steps Ι profile examples see Technical Appendix
PU
Ident-No.
12
169273 s
[pc]
SuperProfiler „Multi-Profile“ 1 operation
6–40
ProďŹ le Knives / Turnover Knives
2 operations
several operations
6–41
Profile Turnover Knives
150508
Grooving Turnover Knives with 4 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in miter glue joint cutterheads
Ι cutting material: HW Ι HL Solid 15 for wood-based panels, hard and soft woods
Ι very accurate profiling for optimum glue joints
Ι in conjunction with profile knife Ident-No.165916 Ι packing unit: 10 pieces
chamfer
ØD
S
Ød
Ident-No.
15
25
4.6
5,4
165918
[°]
[mm]
[mm]
[mm]
150578
Chamfering Profile Knives with 4 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in cutterheads for chamfering
Ι cutting material: HW Ι HL Solid 15 for wood-based panels, hard and soft woods
chamfer
ØD
S
Ød
45
25
5
7
[°]
[mm]
[mm]
[mm]
Advantages
Notes
Ι packing unit: 10 pieces
6–42
Ident-No. [L]
Ident-No. [R]
165966
165965
Profile Turnover Knives
150508
Grooving Turnover Knives with 4 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in grooving cutterheads
Ι cutting material: HW Ι HL Solid 15 for wood-based panels, hard and soft woods
Advantages
Notes
B
H
S
Ød
Ident-No.
18 18 18
18 18 18
1.95 2.5 3.7
10 10 10
163699 165906 169250
[mm]
[mm]
[mm]
[mm]
Ι Ident-No. 163699 for groove width 4 mm Ι Ident-No. 165906 for groove width 5 mm Ι Ident-No. 169250 for groove width > 7 mm Ι packing unit: 10 pieces
150508 / 150509
Grooving Turnover Knives with 2 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in cutterheads for grooving
Ι bore countersunk 90 degrees Ι cutting material: HW Ι HL Solid 30 for hard and soft woods Ι HL Solid 40 for hard and soft woods
Advantages
B
H
S
Ød
Tmax
LEUCODUR
13 16 16 16
36 34 34 34
3.5 3.2 4 5
7,4 6,7 6,7 6,7
10 8 8 8
HL Solid 30 HL Solid 40 HL Solid 40 HL Solid 40
[mm]
[mm]
[mm]
[mm]
[mm]
6–43
Notes
Ι packing unit: 10 pieces
Ident-No.
165968 173484 173485 173486
Profile Turnover Knives
150578
Chamfering Profile Knives with 4 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in cutterheads for chamfering
Ι cutting material: HW Ι HL Solid 15 for wood-based panels, hard and soft woods
Advantages
chamfer
Notes
Ι for left and right hand rotation Ι spacer rings for the adjustment of the chamfer knives see chapter replacement parts Ι packing unit: 10 pieces
B
H
S
Ød
Ident-No.
45
16
22
5
6,5
176416
[°]
[mm]
[mm]
[mm]
[mm]
150578
Rounding Turnover Knives with 4 cutting edges Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in cutterheads for rounding
Ι cutting material: HW Ι HL Solid 15 for wood-based panels, hard and soft woods
Advantages
Notes
R
B
H
S
Ød
Ident-No.
1,5 2 2,5 3
16 16 16 16
22 22 22 22
5 5 5 5
6,5 6,5 6,5 6,5
176417 176418 176419 176420
[mm]
[mm]
[mm]
[mm]
[mm]
Ι for left and right hand rotation Ι spacer rings for the adjustment of the rounding knives see chapter replacement parts Ι packing unit: 10 pieces
6–44
Scraper Turnover Knives / Knives
132891
Scraper Holders - Homag, Reich, IMA Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι edge banding machines Homag, Reich Ι for installation of LEUCODUR radius-, chamfering- and scraper turnover knives B
for R <= 5 15 for R <= 5 22 [mm]
H
Ød
L1
16 14
6,5 6,5
131 118
[mm]
[mm]
[mm]
Ident-No.
Homag, Reich Homag
169252 179463
Spare parts
Dimension
Class-No.
Round Head Screws Screwdrivers Screwdrivers
M4x5,9 T15 T15 T15x80
995195 985730 985730
Ident-No.
167966 163161 171188
[mm]
151555
Scraper Turnover Knives with 2 cutting edges and chamfer - Homag, IMA, Reich Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι edge banding machines Homag, IMA, Reich Ι for use in scraper holders
Ι chamfer angle 45 degrees Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
B
H
S
Ød
12
20
2
4
[mm]
[mm]
[mm]
[mm]
Advantages
Notes
Ι packing unit: 10 pieces
Ident-No.
171180
6–45
Scraper Turnover Knives / Knives
151555
Scraper Turnover Knives with 2 cutting edges and radius - Homag, Reich Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι edge banding machines Homag, Reich Ι for use in scraper holders
Ι 6 degree profile run-out Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
R
B
H
S
Ød
0,8 1 1,5 2 2,5 3 4 5
12 12 12 12 12 12 12 12
20 20 20 20 20 20 20 20
2 2 2 2 2 2 2 2
4 4 4 4 4 4 4 4
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
171401 s 169253 169254 169255 169256 169257 169259 169261
151555
Scraper Turnover Knives with 2 cutting edges and radius - IMA Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι edge banding machines IMA Ι for use in scraper holders
Ι 15 degree profile run-out Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
R
B
H
S
Ød
1 2 3
12 12 12
20 20 20
2 2 2
4 4 4
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
178856 178957 178857
6–46
Scraper Turnover Knives / Knives
151755
Scraper Turnover Knives with 2 cutting edges and radius - Homag Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι edge banding machines Homag Ι for use in scraper holders
Ι 6 degree profile run-out Ι special scraper which avoids material fracturing Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Ι no material fracturing also in the Ι packing unit: 10 pieces case of PP-edges Ι no additional work steps needed
Notes
R
B
H
S
Ød
1,5 2 3
12 12 12
20 20 20
2 2 2
4 4 4
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
181234 181235 181237
151755
Scraper Turnover Knives with 2 cutting edges and radius - IMA Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι edge banding machines IMA Ι for use in scraper holders
Ι 15 degree profile run-out Ι special scraper which avoids material fracturing Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Ι no material fracturing also in the Ι packing unit: 10 pieces case of PP-edges Ι no additional work steps needed
Notes
R
B
H
S
Ød
2 3
12 12
20 20
2 2
4 4
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
181236 181238
6–47
Scraper Turnover Knives / Knives
151586
Scraper Knives with 2 cutting edges and radius - working centers Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι machines Homag combined with flush cutting unit No. 1-056-11-0621
Ι 6 degree profile run-out Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods
Advantages
R
B
H
S
Ød
1,5 2 2,5 3
20 20 20 20
11.5 11.5 11.5 11.5
2 2 2 2
5 5 5 5
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
180025 180020 180021 180022
151586
Scraper Knives with 2 cutting edges and chamfer (glue joint) - working centers Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι machines Homag combined with flush cutting unit No. 1-056-11-0621
Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods
Advantages
chamfer
B
H
S
Ød
3 15 30
20 20 20
11.5 11.5 11.5
2 2 2
5 5 5
[°]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
180023 180210 # 180211 #
6–48
Scraper Turnover Knives / Knives
151586
Chip Breaker for Scraper Knives Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι machines Homag combined with flush cutting unit No. 1-056-11-0621
Ι 6 degree profile run-out Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods
Advantages
R
B
H
S
Ød
1,3
20
11.5
2
5
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
Ident-No.
180024
151586
Scraper Knives with 5 radii and chamfer Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι machines Homag with scraping Ι chamfer 20 in degree, R1, unit Type MN 20 R1,5, R2, R3, R5 Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods
R
B
H
S
Ød
1-5
45,8
17.98
2
5
[mm]
[mm]
[mm]
[mm]
[mm]
6–49
Notes
Ι Ident-No. 180755 can be applied on the left lower or the right upper side Ι Ident-No. 180754 can be applied on the left upper or the right lower side Ι packing unit: 10 pieces Ident-No. [L]
Ident-No. [R]
180755
180754
Scraper Turnover Knives / Knives
151786
Scraper Knives with 5 radii and chamfer Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι machines Homag with scraping Ι chamfer 20 in degree, R1, unit Type MN 20 R1,5, R2, R3, R5 Ι special scraper which avoids material fracturing Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods R
B
H
S
Ød
1-5
45,8
17.98
2
5
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι no material fracturing also in the Ι Ident-No. 181239 can be case of PP-edges applied on the left lower or Ι no additional work steps needed the right upper side Ι Ident-No. 181240 can be applied on the left upper or the right lower side Ι packing unit: 10 pieces Ident-No. [L]
Ident-No. [R]
181240
181239
151548
Scraper Knives with 1 cutting edge and chamfer Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι machines IMA units 181.91 and 0.6126 (BAZ) with 30 mm width, unit 08.50 with 55 mm width
Ι cutting material: HW Ι HL Solid 15 for wood-based panels, hard and soft woods
Advantages
Notes
chamfer
B
H
S
Ød
Ident-No. [L]
Ident-No. [R]
15 15
30 55
22.5 25
3 3
5,8 5,8
178859 178861
178858 178860
[°]
[mm]
[mm]
[mm]
[mm]
Ι packing unit: 10 pieces
6–50
Scraper Turnover Knives / Knives
132821
Scraper Knives with 1 cutting edge and chamfer Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι machines Homag
Ι HW-tipped Ι cutting material: HW Ι HL Solid 15 for wood-based panels, hard and soft woods
chamfer
Advantages
Notes
Ι packing unit: 10 pieces
B
H
S
Ød
Ident-No. [L]
Ident-No. [R]
15
32
55
4.5
5,8
178223
178224
[°]
[mm]
[mm]
[mm]
[mm]
6–51
Cup Knives
150503
Cup Knives Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in side-and-face cutterheads
Ι cutting material: HW Ι HL Board 03 for wood-based panels and plastics
Ι optimum edge lives
Ι packing unit: 10 pieces
ØD
S
Ød
11
4
5
[mm]
[mm]
[mm]
Ident-No.
173396
6–52
Saw Teeth
153306 / 153308
HW Saw Teeth for Circular Saw Blades - solder coated Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Ι solder-coated Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods Ι HL Solid 15 for wood-based panels, hard and soft woods
Ι easy soldering during tooth installation thanks to solder coating
B
H
S
LEUCODUR
2,7 2,8 3,6 4,2 4,5 4,3 5 5,4 6 6,8
7.1 8 8 10.5 8 10.5 10.5 10.5 12.5 12.5
2 2.3 2.3 3.5 2.3 3 3 3 4 4
HL Board 06 HL Solid 15 HL Board 06 HL Solid 15 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Solid 15 HL Board 06
[mm]
[mm]
[mm]
Notes
Ident-No.
177493 177500 177494 177501 177495 177496 177497 177498 177586 177499
6–53
Planing Knives
132121
Planing Knives HW Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in planing cutterheads for hard woods
Ι HW-tipped
Advantages
Notes
B
H
S
Ident-No.
60 80 100 110 120 130 150 170 180 210 230 240 260 310 310 320 320 330 330 360 360 400 410 410 450 450 460 460 500 510 510 600 610 610 630 630 635 640 640 700 710 710
30 30 30 30 30 30 30 30 30 30 30 30 30 30 35 30 35 30 35 30 35 35 30 35 30 35 30 35 35 30 35 35 30 35 30 35 35 30 35 35 30 35
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
160586 006204 006205 165329 o 006206 o 006207 006208 006209 055649 006210 o 160588 182641 160589 o 055648 165338 o 165330 o 165339 o 165331 o 165340 o 165332 o 165341 o 165342 o 006211 165343 o 165333 o 165344 o 165334 o 165345 o 165346 o 006212 165347 o 165348 o 006704 165349 o 165335 o 165350 o 165351 o 165336 o 165352 o 165353 o 160590 o 165354 o
[mm]
[mm]
[mm]
6–54
Planing Knives
B
H
S
Ident-No.
740 740 810 810
30 35 30 35
3 3 3 3
165337 o 165355 o 160592 165356 o
[mm]
[mm]
[mm]
332121
Planing Knives HS Product
Drawing
High Speed Steel [HS]
Machine / Application
Design
Advantages
Notes
Î&#x2122; for use in planing cutterheads for soft woods B
H
S
Ident-No.
60 80 100 110 120 130 150 170 180 210 230 260 310 310 320 320 330 330 360 360 400 400 410 410 450 450 460 460 500 500 510 510 600 600
30 30 30 30 30 30 30 30 30 30 30 30 30 35 30 35 30 35 30 35 30 35 30 35 30 35 30 35 30 35 30 35 30 35
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
160593 160594 055647 160595 o 160596 006139 160597 160598 160599 160600 160601 006485 160602 165310 160603 165311 o 160604 o 165312 160605 o 165313 o 165307 165314 o 006486 006487 160606 o 165315 o 160607 o 165316 o 165308 165317 006488 006489 165309 o 165318 o
[mm]
[mm]
[mm]
6â&#x20AC;&#x201C;55
Planing Knives
B
H
S
Ident-No.
610 610 630 630 635 640 640 700 710 710 740 810 810 840 1050 1050 1200
30 35 30 35 35 30 35 35 30 35 35 30 35 30 30 35 30
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
006490 006491 160608 165319 165320 o 160609 165321 165322 o 160610 o 165323 o 165324 o 160612 165325 160613 o 176331 176332 180535
[mm]
[mm]
[mm]
332121
Planing Knives HS Product
Drawing
High Speed Steel [HS]
Machine / Application
Design
Advantages
Notes
Ι for use in hydro planing cutterheads for soft woods
Ι wedge angle 30° for jointing
Ι high run-out accuracy due to grinding the knives in the hydro planing cutterhead with following jointing process in the machine
Ι packing unit: 2 pieces
B
H
S
Ident-No.
130 150 170 180 190 210 230 240 270 310
30 30 30 30 30 30 30 30 30 30
3 3 3 3 3 3 3 3 3 3
182759 o 182760 o 182761 o 182762 o 182763 o 182764 o 182765 o 182766 o 182767 o 182768 o
[mm]
[mm]
[mm]
6–56
Planing Knives
332124
Planing Knives HS Product
Drawing
High Speed Steel [HS]
Machine / Application
Design
Advantages
Notes
Ι for use in planing cutterheads for soft woods
Ι Topcoat coating
Ι compared to traditional HS the edge live is 3 - 5 times as long
Ι packing unit: 2 pieces
B
H
S
Ident-No.
60 80 100 110 120 130 150 170 180 210 230 260 310 310 320 320 330 330 360 360 400 400 410 410 450 450 460 460 500 500 510 510 600 600 610 610 630 630 635 640 640 700
30 30 30 30 30 30 30 30 30 30 30 30 30 35 30 35 30 35 30 35 30 35 30 35 30 35 30 35 30 35 30 35 30 35 30 35 30 35 35 30 35 35
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
181264 o 181265 o 181266 o 181267 o 181268 o 181269 o 181270 o 181271 o 181272 o 181273 o 181274 o 181275 o 181276 o 181277 o 181278 o 181279 o 181280 o 181281 o 181282 o 181283 o 181284 o 181285 o 181286 o 181287 o 181288 o 181289 o 181290 o 181291 o 181292 o 181293 o 181294 o 181295 o 181296 o 181297 o 181298 o 181299 o 181300 o 181301 o 181302 o 181303 o 181304 o 181305 o
[mm]
[mm]
[mm]
6–57
Planing Knives
B
H
S
Ident-No.
710 710 740 810 810 840 1050 1050
30 35 35 30 35 30 30 35
3 3 3 3 3 3 3 3
181306 o 181307 o 181308 o 181309 o 181310 o 181311 o 181312 o 181313 o
[mm]
[mm]
[mm]
332511
Planing Knives with serrated back HS Product
Drawing
High Speed Steel [HS]
Machine / Application
Design
Ι for use in cutterheads with serration
Ι cutting material: HS for soft woods
Advantages
Notes
Ι also for Weinig Powermat machines, RPM up to 12,000 min-1 Ι packing unit: 2 pieces
B
H
S
Ident-No.
100 130 170 190 230 240
38 38 38 38 38 38
5 5 5 5 5 5
182096 s 182097 s 182098 s 182099 s 182100 s 182101 s
[mm]
[mm]
[mm]
6–58
Planing Knives
152548
SetProfiler set - planing Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι molders Ι for use in profile cutterheads with serration
Ι n max = 12,000 min-1 Ι cutting material: HW Ι HL Solid 30 Topline for hard and soft woods Ι HW Topcoat Ι Topline (polished surface)
Ι long edge life and optimum cutting quality thanks to TOPLINE design Ι compared to uncoated HWBlanks the edge lives is 2 - 3 times as long Ι adjustable knives by means of serration between knive and support plate; 5 adjustments of 1,6 mm = 8 mm sharpening area
Ι packing unit: 2 pieces
B
H
S
310
38
10
[mm]
[mm]
[mm]
Ident-No.
181974 o
Blanks
B
H
S
Class-No.
Ident-No.
HW Blanks HW Topcoat Blanks
310 250
38 38
3.2 3.2
152548 152548
181975o 181976o
[mm]
[mm]
[mm]
support plates
B
suitable for blank height
Class-No.
Ident-No.
250 310
38 38
925400 925400
181977o 181978o
[mm]
[mm]
6–59
Blanks
152548
SetProfiler set - profiling Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι molders Ι for use in profile cutterheads with serration
Ι cutting material: HW Ι HL Solid 30 Topline for hard and soft woods Ι HW Topcoat Ι Topline (polished surface)
Ι long edge life and optimum cutting quality thanks to TOPLINE design Ι compared to uncoated HWBlanks the edge lives is 2 - 3 times as long Ι high economic efficiency thanks to reduced use of grinding wheels, as knives and support plates are profiled separately whereas only the knives are re-ground Ι adjustable knives by means of serration between knive and support plate; 5 adjustments of 1,6 mm = 8 mm sharpening area
Ι serration 60 degrees and partition 1,6 mm for profiling of solid woods and woodbased panels Ι blank height 50 and 60 mm for RPM up to 12,000 min-2 Ι T = profile depth Ι packing unit: 2 pieces
B
H
S
Tmax
40 50 60 70 80 100 130 150 250 40 50 60 70 80 100 130 150 250 40 50 60 70 80 250
50 50 50 50 50 50 50 50 50 60 60 60 60 60 60 60 60 60 70 70 70 70 70 70
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
14 14 14 14 14 14 14 14 14 24 24 24 24 24 24 24 24 24 34 34 34 34 34 34
[mm]
[mm]
[mm]
[mm]
HW Blanks
Ident-No.
181637 o 181638 o 181639 o 181640 o 181641 o 182182 o 182183 o 182184 o 181642 o 181643 o 181644 o 181645 o 181646 o 181647 o 182322 o 182323 o 182324 o 181648 o 181649 o 181650 o 181651 o 181652 o 181653 o 181654 o
B
H
S
T
Class-No.
Ident-No.
40 50
50 50
3.2 3.2
14 14
152548 152548
181619 181620 o
[mm]
[mm]
[mm]
[mm]
6–60
Blanks
HW Blanks
HW Topcoat Blanks
Support Plates
B
H
S
T
Class-No.
Ident-No.
60 70 80 100 130 150 250 40 50 60 70 80 100 130 150 250 40 50 60 70 80 250
50 50 50 50 50 50 50 60 60 60 60 60 60 60 60 60 70 70 70 70 70 70
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2
14 14 14 14 14 14 14 24 24 24 24 24 24 24 24 24 34 34 34 34 34 34
152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548
181621 181622 181623 182179 182180 182181 o 181624 o 181625 181626 o 181627 181628 181629 182319 182320 o 182321 o 181630 o 181631 o 181632 o 181633 o 181634 o 181635 o 181636 o
[mm]
[mm]
[mm]
[mm]
B
H
S
T
Class-No.
Ident-No.
40 50 60 70 80 100 130 150 250 40 50 60 70 80 100 130 150 250
50 50 50 50 50 50 50 50 50 60 60 60 60 60 60 60 60 60
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2
14 14 14 14 14 14 14 14 14 24 24 24 24 24 24 24 24 24
152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548 152548
181665 181666 o 181667 181668 181669 o 182188 o 182189 o 182190 o 181670 o 181671 181672 181673 181674 o 181675 182328 182329 o 182330 o 181676 o
[mm]
[mm]
[mm]
[mm]
B
suitable for blank height
Class-No.
Ident-No.
40 50 60 70 80 100 130 150 250 40 50 60 70 80
50 50 50 50 50 50 50 50 50 60 60 60 60 60
925400 925400 925400 925400 925400 925400 925400 925400 925400 925400 925400 925400 925400 925400
181820 181821o 181822 181823 181824 182185 182186 182187o 181825o 181826 181827 181828 181829 181830
[mm]
[mm]
6â&#x20AC;&#x201C;61
Blanks
Support Plates
B
suitable for blank height
Class-No.
Ident-No.
100 130 150 250 40 50 60 70 80 250
60 60 60 60 70 70 70 70 70 70
925400 925400 925400 925400 925400 925400 925400 925400 925400 925400
182325 182326o 182327o 181831o 181832o 181833o 181834o 181835o 181836o 181837o
[mm]
[mm]
132511
Blanks with serrated back HW Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in profile cutterheads with serration
Ι HW-tipped for hard and exotic woods Ι blank height 60 mm
B
H
S
Tmax
40 40 60 60 80 80 100 100 130 130 150 150 180 180 230 230
50 60 50 60 50 60 50 60 50 60 50 60 50 60 50 60
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
13 18 13 18 13 18 13 18 13 18 13 18 13 18 13 18
[mm]
[mm]
[mm]
[mm]
Advantages
Notes
Ι T = profile depth Ι packing unit: 2 pieces
Ident-No.
165357 o 165365 o 165358 o 165366 o 165359 o 165367 o 165360 o 165368 o 165361 o 165369 o 165362 o 165370 o 165363 o 165371 o 165364 o 165372 o
6–62
Blanks
332511
Blanks with serrated back HS Product
Drawing
High Speed Steel [HS]
Machine / Application
Design
Ι for use in profile cutterheads with serration
Ι cutting material: HS for soft woods
Advantages
Notes
B
H
S
Ident-No.
40 40 40 50 50 60 60 60 80 80 80 100 100 100 130 130 130 150 150 150 180 180 180 230 230 650 650 650
50 60 70 50 60 50 60 70 50 60 70 50 60 70 50 60 70 50 60 70 50 60 70 50 60 50 60 70
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
163385 163386 163387 180533 180534 163388 163389 163390 163391 163392 163393 163394 163395 163396 163397 163398 163399 163400 163401 163402 163403 163404 163405 164495 164496 o 176318 176319 176320
[mm]
[mm]
[mm]
6–63
Blanks
332521
Blanks HS and deflector blanks Product
Drawing
High Speed Steel [HS]
Machine / Application
Design
Ι for use in safety cutterheads
Ι cutting material: HS for soft woods Ι profile depth 15 mm max.
Advantages
B
H
S
Ød
40 40
45 45
4 4
6 6
[mm]
[mm]
[mm]
[mm]
Notes
Ι special steel deflector blanks
Ident-No.
163535 163536
152555
Blanks HW Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in profile cutterheads
Ι width, height, and thickness precision ground Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
B
H
S
Ød
24 28 32 36 40 42 52
22 24 24 28 26 32 34
2 2 2 2 2 2 2
4,5 4,2 4,5 4,2 4,5 4,5 4,2
24 24
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
L
Ident-No.
168821 168822 168823 168824 168825 168826 168828
6–64
Blanks
152555
Blanks HW Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in profile cutterheads
Ι width, height, and thickness precision ground Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
B
H
S
Ød
L
wedge
30 40 50 60 60
25 30 45 25 35
2 2 2 2 2
4,2 4,2 4,2 4,2 4,2
20 20 34 26 44
55 55 55 55 55
[mm]
[mm]
[mm]
[mm]
[mm]
[°]
Notes
Ι packing unit: 10 pieces
Ident-No.
168871 168872 168873 168836 168837
152545
Blanks HW Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in profile cutterheads
Ι width, height, and thickness precision ground Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
B
H
S
Ød
18 20 24 32 40 50
18.3 25.3 28.3 22.3 30.3 32.3
2 2 2 2 2 2
4,5 4,2 4,5 4,5 4,5 4,5
24
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι packing unit: 10 pieces
L
Ident-No.
168829 168830 168831 168832 168833 168834
6–65
Blanks
152545
Blanks HW Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in profile cutterheads
Ι width, height, and thickness precision ground Ι cutting material: HW Ι HL Board 05 for wood-based panels, plastics and hard woods
Advantages
B
H
S
Ød
L
wedge
40 52 60
20.5 27.5 39.5
2 2 2
4,2 4,2 4,2
26 26 44
55 55 55
[mm]
[mm]
[mm]
[mm]
[mm]
[°]
Notes
Ι packing unit: 10 pieces
Ident-No.
168838 168839 168840
152586 / 152589
3P Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in LEUCO EcoPro and special cutterheads
Ι two-point seating surface and point-stop Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods Ι HL Solid 60 for soft woods
Ι precise positioning of the blanks for profiling and of the single-sided profile knife in the cutterhead
Ι profile knife can be profiled per customer specifications Ι packing unit: 10 pieces
B
H
S
Ød
LEUCODUR
12,5 15,5 15,5 16,4 16,7 18,4 18,4 18,4 20,3 20,3
20.5 20.5 25.5 20.5 25.9 18.9 25.9 36.3 20.5 25.5
2 2 2 2 2 2 2 2 2 2
5 5 5 5 5 5 5 5 5 5
HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06
[mm]
[mm]
[mm]
[mm]
6–66
Ident-No.
178509 178510 178511 178512 178513 178514 178515 178516 178517 178518
Blanks
B
H
S
Ød
LEUCODUR
20,3 22,3 24,3 24,3 25,3 25,3 28,2 28,2 12,5 15,5 15,5 16,4 16,7 18,4 18,4 18,4 20,3 20,3 20,3 22,3 24,3 24,3 25,3 25,3 28,2 28,2
30.4 25.5 20.9 28.4 25.9 35.3 25.5 35.3 20.5 20.5 25.5 20.5 25.9 18.9 25.9 36.3 20.5 25.5 30.4 25.5 20.9 28.4 25.9 35.3 25.5 35.3
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60
[mm]
[mm]
[mm]
[mm]
Ident-No.
178519 178520 178521 178522 178523 178524 178525 178526 179509 179510 179511 179512 179513 179514 179515 179516 179517 179518 179519 179520 179521 179522 179523 179524 179525 179526
152586 / 152589
3P Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in LEUCO EcoPro and special cutterheads
Ι two-point seating surface and point-stop Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods Ι HL Solid 60 for soft woods
Ι precise positioning of the blanks for profiling and of the single-sided profile knife in the cutterhead
Ι profile knife can be profiled per customer specifications Ι packing unit: 10 pieces
B
H
S
Ød
L
LEUCODUR
30,2 30,2 32,2 32,2 32,8 35,2 40,1 40,1
25.5 30.4 22.8 35.4 47.2 26 20.9 30.4
2 2 2 2 2 2 2 2
5 5 5 5 5 5 5 5
11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 21,7 - 25,5 21,7 - 25,5
HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06
[mm]
[mm]
[mm]
[mm]
[mm]
6–67
Ident-No.
178527 178528 178529 178530 178531 178532 178533 178534
Blanks
B
H
S
Ød
L
LEUCODUR
40,8 42,8 42,8 45,8 49,9 49,9 49,9 60,6 59,8 80,6 30,2 30,2 32,2 32,2 32,8 35,2 40,1 40,1 40,8 42,8 42,8 45,8 49,9 49,9 49,2 60,6 59,8 80,6
36 31 36 36 20.9 33 40.2 25.8 35.4 35.8 25.5 30.4 22.8 35.4 47.2 26 20.9 30.4 36 31 36 36 20.9 33 40.2 25.8 35.4 35.8
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 26 - 22 25,5 + 43,2 44 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 26 - 22 25,5 + 43,2 44
HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Board 06 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60 HL Solid 60
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
178535 178536 178537 178538 178539 178540 178541 178542 178543 178544 179527 179528 179529 179530 179531 179532 179533 179534 179535 179536 179537 179538 179539 179540 179541 179542 179543 179544
152786
3P Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in LEUCO EcoPro and special cutterheads
Ι two-point seating surface and point-stop Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods Ι Topline (polished surface)
Ι long edge life and optimum cutting quality thanks to TOPLINE design Ι precise positioning of the blanks for profiling and of the single-sided profile knife in the cutterhead
Ι figure shows left hand design, top view, polished Ι profile knife can be profiled per customer specifications Ι packing unit: 10 pieces
B
H
S
Ød
12,5 15,5 15,5 16,4 16,7 18,4
20.5 20.5 25.5 20.5 25.9 18.9
2 2 2 2 2 2
5 5 5 5 5 5
[mm]
[mm]
[mm]
[mm]
Ident-No. [L]
179547& 179549& 179551& 179553& 179555& 179557&
6–68
Ident-No. [R]
179548 179550& 179552& 179554& 179556& 179558&
Blanks
B
H
S
Ød
18,4 18,4 20,3 20,3 20,3 22,3 24,3 24,3 25,3 25,3 28,2 28,2
25.9 36.3 20.5 25.5 30.4 25.5 20.9 28.4 25.9 35.3 25.5 35.3
2 2 2 2 2 2 2 2 2 2 2 2
5 5 5 5 5 5 5 5 5 5 5 5
[mm]
[mm]
[mm]
[mm]
Ident-No. [L]
179559& 179561& 179563& 179565& 179567& 179569& 179571& 179573& 179575 179577& 179579 179581&
Ident-No. [R]
179560& 179562& 179564& 179566& 179568& 179570& 179572& 179574& 179576 179578& 179580 179582&
152789
3P Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in LEUCO EcoPro and special cutterheads
Ι two-point seating surface and point-stop Ι cutting material: HW Ι HL Solid 60 for soft woods Ι Topline (polished surface)
Ι long edge life and optimum cutting quality thanks to TOPLINE design Ι precise positioning of the blanks for profiling and of the single-sided profile knife in the cutterhead
Ι figure shows left hand design, top view, polished Ι profile knife can be profiled per customer specifications Ι packing unit: 10 pieces
B
H
S
Ød
12,5 15,5 15,5 16,4 16,7 18,4 18,4 18,4 20,3 20,3 20,3 22,3 24,3 24,3 25,3 25,3 28,2 28,2
20.5 20.5 25.5 20.5 25.9 18.9 25.9 36.3 20.5 25.5 30.4 25.5 20.9 28.4 25.9 35.3 25.5 35.3
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
[mm]
[mm]
[mm]
[mm]
Ident-No. [L]
179621& 179623& 179625& 179627& 179629& 179631& 179633& 179635& 179637& 179639& 179641& 179643& 179645& 179647& 179649& 179651& 179653& 179655&
6–69
Ident-No. [R]
179622& 179624& 179626& 179628& 179630& 179632& 179634& 179636& 179638& 179640& 179642& 179644& 179646& 179648& 179650& 179652& 179654& 179656&
Blanks
152786
3P Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in LEUCO EcoPro and special cutterheads
Ι two-point seating surface and point-stop Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods Ι Topline (polished surface)
Ι long edge life and optimum cutting quality thanks to TOPLINE design Ι precise positioning of the blanks for profiling and of the single-sided profile knife in the cutterhead
Ι figure shows left hand design, top view, polished Ι profile knife can be profiled per customer specifications Ι packing unit: 10 pieces
B
H
S
Ød
L
30,2 30,2 32,2 32,2 32,8 35,2 40,1 40,1 40,8 42,8 42,8 45,8 49,9 49,9 49,9 60,6 59,8 80,6
25.5 30.4 22.8 35.4 47.2 26 20.9 30.4 36 31 36 36 20.9 33 40.2 25.8 35.4 35.8
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 22 - 26 25,5 + 43,2 44
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No. [L]
179583& 179585& 179587& 179589& 179591& 179593 179595& 179597& 179599& 179601& 179603& 179605& 179607& 179609& 179611& 179613& 179615& 179617&
6–70
Ident-No. [R]
179584& 179586& 179588& 179590& 179592& 179594 179596& 179598& 179600& 179602& 179604& 179606& 179608& 179610& 179612& 179614& 179616& 179618&
Blanks
152789
3P Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in LEUCO EcoPro and special cutterheads
Ι two-point seating surface and point-stop Ι cutting material: HW Ι HL Solid 60 for soft woods Ι Topline (polished surface)
Ι long edge life and optimum cutting quality thanks to TOPLINE design Ι precise positioning of the blanks for profiling and of the single-sided profile knife in the cutterhead
Ι figure shows left hand design, top view, polished Ι profile knife can be profiled per customer specifications Ι packing unit: 10 pieces
B
H
S
Ød
L
30,2 30,2 32,2 32,2 32,8 35,2 40,1 40,1 40,8 42,8 42,8 45,8 49,9 49,9 49,9 60,6 59,8 80,6
25.5 30.4 22.8 35.4 47.2 26 20.9 30.4 36 31 36 36 20.9 33 40.2 25.8 35.4 35.8
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 11,8 - 13,8 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 21,7 - 25,5 22 - 26 25,5 + 43,2 44
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No. [L]
179657& 179659& 179661& 179663 179665& 179667 179669& 179671& 179673& 179675 179677& 179679& 179681& 179683& 179685& 179687& 179689& 179691&
6–71
Ident-No. [R]
179658& 179660& 179662& 179664& 179666& 179668 179670& 179672& 179674& 179676& 179678& 179680& 179682& 179684& 179686& 179688& 179690& 179692&
Blanks
152526 / 152529
SuperProfiler Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in LEUCO SuperProfiler cutterheads
Ι thickness ground Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods Ι HL Solid 60 for soft woods
Advantages
B
H
S
Ød
L
Tmax
LEUCODUR
30,6 30,6 40,6 40,6 40,6 40,6 49,3 60,8 60,8 60,6 60,6 80,6 80,6
25.5 25.5 28.2 28.2 40.6 40.6 33.7 30.2 30.2 45.6 45.6 45.6 45.6
1.5 1.5 1.5 1.5 2 2 1.5 1.5 1.5 2 2 2 2
4 4 4 4 5 5 4 4 4 5 5 6 6
16 - 20 16 - 20 28 28 28 28 35 48 48 45 45 65 65
13 13 13 13 20 20 16 15 15 25 25 25 25
HL Board 06 HL Solid 60 HL Board 06 HL Solid 60 HL Board 06 HL Solid 60 HL Board 06 HL Board 06 HL Solid 60 HL Board 06 HL Solid 60 HL Board 06 HL Solid 60
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι for concave and convex profiles Ι T = maximum profile depth
Ident-No.
179114 177369 179112 177367 179115 178844 180199 179113 177368 179999 178845 180016 180017
152726 / 152729
SuperProfiler Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in LEUCO SuperProfiler cutterheads
Ι Topline (polished surface) Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods Ι HL Solid 60 for soft woods
Ι significantly improved cutting edges Ι optimum edge lives Ι optimum quality of cut
Ι T = maximum profile depth
B
H
S
Ød
L
Tmax
LEUCODUR
30,6 30,6
25.5 25.5
1.5 1.5
4 4
16 - 20 16 - 20
13 13
HL Board 06 HL Solid 60
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
6–72
Ident-No. [L]
Ident-No. [R]
178701 177789
178702 177790
Blanks
B
H
S
Ød
L
Tmax
LEUCODUR
40,6 40,6 40,6 40,6 49,3 60,8 60,8 60,6 60,6 80,6 80,6
28.2 28.2 40.6 40.6 33.7 30.2 30.2 45.6 45.6 45.6 45.6
1.5 1.5 2 2 1.5 1.5 1.5 2 2 2 2
4 4 5 5 4 4 4 5 5 6 6
28 28 28 28 35 48 48 45 45 65 65
13 13 20 20 16 15 15 25 25 25 25
HL Board 06 HL Solid 60 HL Board 06 HL Solid 60 HL Board 06 HL Board 06 HL Solid 60 HL Board 06 HL Solid 60 HL Board 06 HL Solid 60
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No. [L]
178627 177791 180030& 180032& 180208 178643 177809 180034 180040& 180042 180044
Ident-No. [R]
178626 177808 180031 180033 180209 178628 177810 180035 180041 180043 180045
152726
SuperProfiler Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Advantages
Notes
Ι for use in LEUCO SuperProfiler cutterheads
Ι Topline (polished surface) Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods
Ι significantly improved cutting edges Ι optimum edge lives Ι optimum quality of cut
Ι T = maximum profile depth Ι figure shows right hand design, top view, polished
B
H
S
Ød
L
Tmax
49,4
44.5
2
5
35
22
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No. [L]
Ident-No. [R]
180219
180220
152526
SuperProfiler Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in LEUCO SuperProfiler cutterheads
Ι cutting material: HW Ι HL Board 06 for wood-based panels, plastics and soft woods
Advantages
B
H
S
Ød
L
Tmax
49,4
44.5
2
5
35
22
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι T = maximum profile depth
Ident-No.
180218
6–73
Blanks
152536
PolyProfiler / EcoPro Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in LEUCO PolyProfiler and EcoPro cutterheads
Ι two-point seating surface and Ι precise positioning of the center stop for axial positioning blanks for profiling and of the Ι cutting material: HW single-sided profile knife in the Ι HL Board 06 for wood-based cutterhead panels, plastics and soft woods
Advantages
B
H
S
Ød
L
41
32.5
2
5
21,7-25,5
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι profile knife can be profiled per customer specifications Ι packing unit: 10 pieces
Ident-No.
180197
152536
PolyProfiler / EcoPro Blanks Product
Drawing
Tungsten Carbide [HW]
Machine / Application
Design
Ι for use in LEUCO PolyProfiler and EcoPro cutterheads
Ι two-point seating surface and Ι precise positioning of the center stop for axial positioning blanks for profiling and of the single-sided profile knife in the Ι cutting material: HW Ι HL Board 06 for wood-based cutterhead panels, plastics and soft woods
Advantages
B
H
S
Ød
L
61
34
2
5
41,7-45,5
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι profile knife can be profiled per customer specifications Ι packing unit: 10 pieces
Ident-No.
180198
6–74