Clamping Systems
Product
Page
Quick-Clamping Systems
1-1
Attachment Sleeves and Flanges
1 - 14
Clamping Systems with cylindrical shank for shank-type tools
1 - 20
Clamping Systems with SK and BT shank for shank-type tools
1 - 26
Clamping Systems with SK and BT shank for tools with bore
1 - 33
Clamping Systems with HSK shank for shank-type tools
1 - 34
Clamping Systems with HSK shank for tools with bore
1 - 41
Clamping Systems with MK shank for shank-type tools
1 - 47
Clamping Systems for Drill Bits
1 - 49
Mounting Devices
1 - 56
Technical Information
1 - 58
Quick-Clamping Systems
933011
Clamping Systems Ø 110 mm Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι double end tenoners Ι through feed machines Ι for mounting of tools with bore and for combination with mounting flanges Ø 110 mm
Ι hardened tool mounting area Ι n max = 9,000 min-1
Ι excellent balance quality Ι long tool life Ι consistent runout accuracy after each tool change Ι minimization of setup-times thanks to easy and quick tool change Ι maintenance-free and protected from dust
Ι for right- and lefthand rotation Ι indicate machine type and shaft design when placing an order Ι required tool adapters ClassNo. 997370 Ι for changing the tools the pneumatic part Ident-No. 058250 is necessary Ι operational pressure 6 bar Ι included in delivery: clamping part incl. cap for attachment on the machine spindle
ØD
Ø D2
Ød
L1
L3
DKN
110
50
30
63
47.5
8x3
110
50
30
63
47.5
8x3
110
50
35
63
47.5
10x4
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
172399& Homag, Lehbrink, Torwegge, SPA, Wilmsmeyer Spanevello
Spare parts
Dimension
for Ident-No.
Class-No.
Head Cap Screws Covers Covers Covers Spacers pneumatic hose
M12x30 DIN EN ISO 4762
172399 172399 160836 162599 172399
995111 997370 997370 997370 955520 994200
55x23,5x30 [mm]
7–1
160836 162599
Ident-No.
001917 172397 181802 162602 172398 058250
Quick-Clamping Systems
997370
Mounting Flanges for Clamping System Ø 110 mm Product
Drawing
Machine / Application
Design
Advantages
Ι for the mounting of saw blades up to Ø 250 mm with bore Ø 65 mm, 6 countersunk holes TK 90 mm for screw M 5
ØD
Ø d1min
L2
L
L1
110
65
2,5
10
27
[mm]
[mm]
[mm]
[mm]
[mm]
Spare parts
Notes
Ι for right and left hand rotation Ι especially suited for the mounting of scoring saw blades Ι at least two separate tool/flange assemblies should be used per clamping element (reduced downtimes) Ι for DP circular saw blades the cylindrical head screw IdentNo. 001869 is necessery (to be order separately)
Dimension
Ident-No. [L]
Ident-No. [R]
164770
164758
Class-No.
Countersunk Flat Headed Screws M5x12 Head Cap Screws M5x12 DIN 912
for mounting of saw blade for mounting of DP saw blades
995122 995111
Ident-No.
180007 001869
[mm]
997370
Mounting Flanges for Clamping System Ø 110 mm Product
Drawing
Machine / Application
Design
Advantages
Ι for the mounting of saw blades up to Ø 250 mm and saw plate thickness 1.8 - 2.2 mm with bore Ø 50 mm, 3 NL - Ø 22 mm, TK Ø 80 mm
Notes
Ι for right and left hand rotation Ι especially suited for the mounting of scoring saw blades
ØD
Ø d1min
L
L1
107
50
10
26.5
[mm]
[mm]
[mm]
[mm]
Ident-No.
160849
7–2
Quick-Clamping Systems
997370
Mounting Flanges for Clamping System Ø 110 mm Product
Drawing
Machine / Application
Design
Advantages
Ι for mounting of light tools with bore Ø 30 mm, 6 countersunk holes for M 5, TK Ø 90 mm
ØD
Ø d1min
L2
L
L1
110
30
15,5
10
40
[mm]
[mm]
[mm]
[mm]
[mm]
Spare parts
Notes
Ι for right and left hand rotation Ι at least two separate tool/flange assemblies should be used per clamping element (reduced downtimes)
Dimension
Ident-No. [L]
Ident-No. [R]
163705
163226
Class-No.
Countersunk Flat Headed Screws M5x12 Head Cap Screws M5x12 DIN 912
995122 995111
Ident-No.
180007 001869
[mm]
933011
Clamping Systems Ø 140 mm Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι double end tenoners Ι through feed machines Ι for mounting of tools with bore and for combination with mounting flanges Ø 140 mm
Ι n max = 9,000 min-1
Ι excellent balance quality Ι long tool life thanks to hardened tool mounting area Ι consistent runout accuracy after each tool change Ι minimization of setup-times thanks to easy and quick tool change Ι maintenance-free and protected from dust
Ι for right- and lefthand rotation Ι mounting examples (see drawings): shaft with internal thread, shaft with external thread Ι indicate machine type and shaft design when placing an order Ι required tool adapters ClassNo. 997370 Ι for changing the tools the pneumatic part Ident-No. 058250 is necessary Ι operational pressure 6 bar Ι included in delivery: clamping part incl. cap for attachment on the machine spindle (spare parts for Homag and IMA not included in delivery)
7–3
Quick-Clamping Systems
ØD
Ø D2
Ød
L1
L3
DKN
140 140 140
80 80 80
30 35 40
57 57 57
41.5 41.5 41.5
8x3 10x4 12x5
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
Homag Homag, IMA
167453 167451 167452
Spare parts
ØD
Ø D1
Ød
for Ident-No.
Class-No.
Covers Covers Covers Special Nuts
40 45 58 58
30 35 40
17 22 22 M30 x 1,5
167453 167451 167452
997370 997370 997370 995290
[mm]
[mm]
[mm]
ØD
Ø D1
Ød
for Ident-No.
Class-No.
Ident-No.
35
30 17 35 22
167453 167453 167451 167451
997370 997370 997370 997370 995111
168457s 181802 180540 180082 Homag2
[mm]
[mm]
[mm]
ØD
Ød
Dimension
Class-No.
Ident-No.
1 centering adapter 2 special nuts 3 countersunk flat headed screws 4 spacers 70
35 M35x1,5
997370 995290
180540 IMA3
995121
IMA4
955520
170363
Spare parts
1 centering adapter 2 caps 40 1 centering adapter 2 caps 45 3 cylindrical head screws
Spare parts
[mm]
30
35
70x25x35
[mm]
[mm]
7–4
Ident-No.
181802 180082 180121 170364
Quick-Clamping Systems
997370
Mounting Flanges for Clamping System Ø 140 mm Product
Drawing
Machine / Application
Design
Advantages
Ι for mounting of mediumweight tools with bore Ø 30 mm, 6 countersunk holes for M 8, TK Ø 110 mm
Notes
Ι for right and left hand rotation Ι for S-System on shaft with internal thread Ι indicate shaft design when placing an order Ι at least two separate tool/flange assemblies should be used per clamping element (reduced downtimes)
ØD
Ø d1min
L2
L
L1
137
30
17,4
10.8
43.4
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No. [L]
Ident-No. [R]
163946
163945
997370
Mounting Flanges for Clamping System Ø 140 mm Product
Drawing
Machine / Application
Design
Advantages
Ι for mounting of mediumweight tools with bore Ø 80 mm, 6 countersunk holes for M 8, TK Ø 110 mm
Notes
Ι for right and left hand rotation Ι for S-System on shafts with external thread Ι indicate shaft design when placing an order Ι at least two separate tool/flange assemblies should be used per clamping element (reduced downtimes)
ØD
Ø d1min
L2
L
L1
137
80
17,5
11.8
44.7
[mm]
[mm]
[mm]
[mm]
[mm]
7–5
Ident-No. [L]
Ident-No. [R]
168401
168400
Quick-Clamping Systems
997370
Mounting Flanges for Clamping System Ø 140 mm Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι for the mounting of saw blades up to Ø 400 mm and saw plate thickness 1.8 - 2.2 mm with bore Ø 80 mm, 3 NL - Ø 22 mm, TK Ø 110 mm ØD
Ø d1min
L
L1
137
80
10
28
[mm]
[mm]
[mm]
[mm]
Ident-No.
177050
933011
Clamping Systems Ø 160 mm Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι double end tenoners Ι through feed machines Ι for mounting of tools with bore
Ι n max = 9,000 min-1
Ι excellent balance quality Ι long tool life thanks to hardened tool mounting area Ι consistent runout accuracy after each tool change Ι minimization of setup-times thanks to easy and quick tool change Ι maintenance-free and protected from dust
Ι for right- and lefthand rotation Ι mounting examples (see drawing): shaft with internal thread, shaft with external thread Ι indicate machine type and shaft design when placing an order Ι required tool adapters ClassNo. 997370 Ι for changing the tools the pneumatic part Ident-No. 058250 is necessary Ι operational pressure 6 bar Ι included in delivery: clamping part incl. cap for attachment on the machine spindle (spare parts for Homag and IMA not included in delivery)
ØD
Ø D2
Ød
L1
L3
DKN
160 160
80 80
35 40
60 60
44.5 44.5
10x4 12x4
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
Homag, IMA
7–6
167462 167463
Quick-Clamping Systems
Spare parts
ØD
Ø D1
Ød
Class-No.
Covers Covers Covers Special Nuts
40 45 58 58
30 35 40
17 22 22 M30 x 1,5
997370 997370 997370 995290
[mm]
[mm]
[mm]
ØD
Ø D1
Ød
Class-No.
Ident-No.
40
30
45
35
30 17 35 22
997370 997370 997370 997370 995111 955520
168457 s 181802 180540 180082 Homag1 180647
[mm]
[mm]
Dimension
Class-No.
Ident-No.
M35x1,5
997370 995290
180540 IMA3
995121
IMA4
955520
170363
Spare parts
1 centering adapter 2 caps 1 centering adapter 2 caps 3 head cap screws 4 spacers
60
35
[mm]
Spare parts
ØD
Ød
1 centering adapter 2 special nuts 3 countersunk flat headed screws 4 spacers 70
35
[mm]
35
70x25x35
[mm]
[mm]
7–7
Ident-No.
181802 180082 180121 170364
Quick-Clamping Systems
997370
Mounting Flanges for Clamping System Ø 160 mm Product
Drawing
Machine / Application
Design
Advantages
Ι for mounting of heavy tools with bore Ø 30 mm with 4 countersunk holes M 8, TK Ø 130 mm
Notes
Ι for S-System on shafts with external thread Ι for right and left hand rotation Ι indicate shaft design when placing an order Ι at least two separate tool/flange assemblies should be used per clamping element (reduced downtimes)
ØD
Ø d1min
L2
L
L1
157
30
17,4
10.8
43.4
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No. [L]
Ident-No. [R]
167465
167464
997370
Mounting Flanges for Clamping System Ø 160 mm Product
Drawing
Machine / Application
Design
Advantages
Ι for mounting of heavy tools with bore Ø 80 mm with 4 countersunk holes M 8, TK Ø 130 mm
Notes
Ι for S-System on shafts with external thread Ι for right and left hand rotation Ι indicate shaft design when placing an order Ι at least two separate tool/flange assemblies should be used per clamping element (reduced downtimes)
ØD
Ø d1min
L2
L
L1
157
80
18
11.8
45
[mm]
[mm]
[mm]
[mm]
[mm]
7–8
Ident-No. [L]
Ident-No. [R]
168399
168398
Quick-Clamping Systems
933011
Zeroplan Clamping Systems Ø 160 mm Product
Drawing
Machine / Application
Design
Advantages
Ι double end tenoners Ι through feed machines Ι for mounting of tools with bore and for combination with mounting flanges Ø 160 mm
Ι n max = 7,200 min-1
Ι high runout accuracy almost as Ι for right- and lefthand rotation good as on hydro motors, now Ι for changing the tools the available for standard-motor pneumatic part Ident-No. shafts d = 35 058250 is necessary Ι distinct increase of edge life and Ι operational pressure 6 bar quality thanks to precise run-outadjustment Ι consistent runout accuracy after each tool change Ι minimization of setup-times thanks to easy and quick tool change Ι maintenance-free and protected from dust
Notes
ØD
Ød
Ø d1min
L2
L1
DKN
160 160
35 35
60 60
17,5 17,5
95 102
10x4 10x4
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
Homag without i extraction hood IMA
180654 180655
Spare parts
Dimension
Class-No.
Ident-No.
Covers ( IMA ) Engineers Wrenches
45x25x35 DKN SW10/13 DIN 895
997370 985720
180656o 171060o
[mm]
7–9
Quick-Clamping Systems
933011
Clamping Systems Ø 192 mm Product
Drawing
Machine / Application
Design
Ι double end tenoners Ι n max = 7,200 min-1 Ι through feed machines Ι for mounting of hoggers with Ø 250 mm
ØD
Ød
Ø d1min
KN
192
35
80
10x4
192
35
80
10x4
192
40
80
12x5
192
35
80
10x4
192
35
80
10x4
192
40
80
192
35
80
10x4
192
35
80
10x4
192
35
80
10x4
192
35
80
10x4
192
40
80
12x5
192
35
80
10x4
192 192 192
30 30 35
80 80 80
8x3 10x4
[mm]
[mm]
[mm]
Notes
Ι for right- and lefthand rotation Ι mounting example (see drawing) Ι indicate machine type and shaft design when placing an order Ι required tool adapters Class-No. Ι operational pressure 6 bar Ι included in delivery: see accessory list
DKN
10x4
[mm]
Advantages
Ι excellent balance quality Ι long tool life thanks to hardened tool mounting area Ι consistent runout accuracy after each tool change Ι minimization of setup-times thanks to easy and quick tool change Ι maintenance-free and protected from dust
Ident-No.
clamping part, spacer ring clamping part, spacer ring clamping part, spacer ring clamping part, spacer ring clamping part, spacer ring, cover disk clamping part, spacer ring clamping part, spacer ring clamping part, spacer ring, cover disk clamping part clamping part, spacer ring, cover disk clamping part, spacer ring, cover disk clamping part, cover disk clamping part clamping part clamping part
[mm]
7–10
IMA, B+G, Hüllhorst
161363&
B+G (flat nut)
161364&
B+G, SCM-Stefani
161365&
Celaschi
161366&
Danckaert
161367&
Gabbiani
161257&
Festo
161256&
Frommia
161258&
Homag, Lehbrink, Torwegge, SPA, Wilmsmeyer
161259
Kuhlmann
161260&
M+S, Schwabedissen
161251&
Raimann
161252&
SPA Wadkin Wigo
161253 s 161254 s 161255 s
Quick-Clamping Systems
933011
Hydro Clamping Systems Ø 160 mm Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι for mounting of tools with bore
Ι hardened tool mounting area Ι n max = 9,000 min-1 Ι closed hydraulic expansion clamping chuck with one clamping zone for tight-tolerance fit on the motor shaft
Ι high cutting quality thanks to distinctly increased runout accuracy and concentricity Ι consistent runout accuracy after each tool change Ι minimization of setup-times thanks to easy and quick tool change Ι maintenance-free
Ι for right- and lefthand rotation Ι specifically designed for high-precision motors with hexagonal spindle base Ι for changing the tools the pneumatic part Ident-No. 058250 is necessary Ι operational pressure 6 bar Ι included in delivery: hydro quick-clamping system incl. Screwdrivers
ØD
Ød
Ø d1min
L2
L1
a
160
40
60
17,5
96
78.5
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
Hoggers
172677
Spare parts
Class-No.
Covers with O-Rings Head Cap Screws pneumatic hose Screwdrivers Cranked Wrench Keys
997300 995111 994200 985730 985730
7–11
Ident-No.
172679 177105 058250 167817 177106
Quick-Clamping Systems
933011
Hydro Clamping Systems Ø 160 mm Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι for mounting of tools with bore
Ι hardened tool mounting area Ι n max = 9,000 min-1 Ι closed hydraulic expansion clamping chuck with one clamping zone for tight-tolerance fit on the motor shaft
Ι high cutting quality thanks to distinctly increased runout accuracy and concentricity Ι consistent runout accuracy after each tool change Ι minimization of setup-times thanks to easy and quick tool change Ι maintenance-free
Ι for right- and lefthand rotation Ι specifically designed for high-precision motors with hexagonal spindle base Ι for changing the tools the pneumatic part Ident-No. 058250 is necessary Ι operational pressure 6 bar Ι included in delivery: hydro quick-clamping system incl. Screwdrivers
ØD
Ød
Ø d1min
L2
a
160
40
60
35
53
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
milling tools
176829
Spare parts
Class-No.
Covers with O-Rings Head Cap Screws pneumatic hose Screwdrivers Cranked Wrench Keys
997300 995111 994200 985730 985730
7–12
Ident-No.
172679 177105 058250 167817 177106
Quick-Clamping Systems
Accessories for Quick-Clamping Systems Product
Drawing
Machine / Application
Design
Advantages
Ι for engaging or releasing the LEUCO quick-clamping systems
Notes
Ι anti-twist bolt Ident-No. 160875 for mounting Ι ring Ident-No. 170363 is required for L = 68 mm if no centering adapter is used Ι nut Ident-No. 170364 is required for IMA machines with short shaft Ι the pneumatic hose is required to change the tools; must be ordered separately before first delivery of clamping systems Class-No.
hydraulic connector R 1/8“ (old design) hydraulic connector M10x1 (new design) fitting pneumatic hose complete
994400 994400 997800 994200
Spare parts
for S-Sytem Ø D/d
ØD
Ø D1
Ød
Class-No.
Covers Covers Covers Covers Special Nuts Spacers Bolts
110/140/160/30 110/35 140/160/35 140/160/40 140/160/35 140/160/35 110/140/160
40 40 45 58 58 70
30 35 35 40
17 17 22 22 M30 x 1,5 35 10x120
997370 997370 997370 997370 995290 955520 995322
[mm]
[mm]
[mm]
7–13
Ident-No.
160632 180084 161289 058250
Ident-No.
181802 162602 180082 180121 170364 170363 160875
Attachment Sleeves and Flanges
997300
Hydro Clamping Bushings Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι for mounting of tools with bore
Ι hardened tool mounting area Ι Ident-No. 172678 with one clamping zone Ι Ident-No. 182103 with two clamping zones and for use with adjustment unit Ι closed hydraulic expansion clamping chuck for tight-tolerance fit on the motor shaft
Ι optimum cutting quality when milling and hogging Ι maintenance-free and inured to dirt
Ι for right and left hand rotation Ι specifically designed for high-precision motors with hexagonal spindle base Ι included in delivery: hydro clamping bushing incl. screwdrivers SW 6
ØD
Ød
Ø d1min
L2
L1
a
NL
120 120
40 40
60 60
68 68
96 96
20 20
4/M8/100 4/M8/100
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
172678 182103
Spare parts
Class-No.
Covers with O-Rings Head Cap Screws Screwdrivers Cranked Wrench Keys
for axial locking or bores 40 mm M14x70 DIN 6912 for 172679 for hydro pressure build-up SW12 DIN 6911
997300 995111 985730 985730
Ident-No.
172679 177105 167817 177106
997300
Hydro Clamping Bushings Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι for mounting of tools with bore and for combination with Postforming radius panel raising cutters und LEUCODIA CompactTec hoggers
Ι hardened tool mounting area Ι with one clamping zone Ι closed hydraulic expansion clamping chuck for tight-tolerance fit on the motor shaft
Ι excellent cutting quality when milling and hogging Ι maintenance-free
Ι for right- and lefthand rotation Ι specifically designed for high-precision motors with hexagonal spindle base Ι included in delivery: Hydro Clamping Bushing incl. screwdriver SW 6
ØD
Ød
Ø d1min
L2
L1
a
NL
120
40
60
68
96
60
4/M8/100
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
7–14
Ident-No.
173724
Attachment Sleeves and Flanges
Spare parts
Class-No.
Covers with O-Rings Head Cap Screws Screwdrivers Cranked Wrench Keys
for axial locking or bores 40 mm M14x70 DIN 6912 for 172679 for hydro pressure build-up SW12 DIN 6911
997300 995111 985730 985730
Ident-No.
172679 177105 167817 177106
997300
Hydro Clamping Bushings Product
Drawing
Machine / Application
Design
Advantages
Ι for mounting of tools with Ι hardened tool mounting area cutters with progressive Ι with one clamping zone adjustment of the cutting width Ι closed hydraulic expansion clamping chuck for tight-tolerance fit on the motor shaft
Ι excellent cutting quality when milling Ι maintenance-free
ØD
Ø D2
Ød
Ø d1min L2
L1
L3
NL
120
50
40
60
39
101
44
4/M8/100
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ι for right and left hand rotation Ι specifically designed for high-precision motors with hexagonal spindle base
Ident-No.
180181
933030
Hydro Clamping Bushings Product
Drawing
Machine / Application
Design
Ι for mounting of tools with bore with LEUCO hoggers Ø 200 mm and Ø 250 mm
Ι hardened tool mounting area Ι with one clamping zone Ι closed hydraulic expansion clamping chuck for tight-tolerance fit on the motor shaft
Advantages
Notes
ØD
Ød
Ø d1min L2
L1
L3
DKN
NL
120
35
80
17,7
90
63
10x4
4/M8/100
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ι for right and left hand rotation Ι fits conventional motors with shaft 35 mm and keyway
7–15
Ident-No.
170264 o
Attachment Sleeves and Flanges
933030
Hydro Clamping Bushings Product
Drawing
Machine / Application
Design
Ι machines Paul Ι hardened tool mounting area Ι for mounting of of multi-rip saw Ι with one clamping zone blades and hoggers Ι closed hydraulic expansion clamping chuck for tight-tolerance fit on the motor shaft
ØD
Ød
Ø d1min
L2
L1
NL
150
100
110
18
93
4/M8/130
[mm]
[mm]
[mm]
[mm]
[mm]
Advantages
Notes
Ι high smoothness of running Ι short retool-times of panel-widths thanks to quick adjustment of tools Ι maintenance-free
Ι for right and left hand rotation Ι mounting arrangements: 1. saw blade with spacer, 2. hogger without spacer Ι positive locking between machine and sleeve Ι tap holes on PCD for fixing of tools Ident-No.
180455
Spare parts
Dimension
Class-No.
Head Cap Screws Cranked Wrench Keys
M14x70 DIN 6912 SW12 DIN 6911
995111 985730
Ident-No.
177105 177106
[mm]
997300
Clamping Bushings Product
Drawing
Machine / Application
Design
Ι for mounting of tools with bore and for combination with cutters and hoggers
Ι hardened tool mounting area Ι n max = 9,000 min-1
Advantages
ØD
Ød
Ø d1min
L2
L1
a
NL
120
40
60
68
96
20
4/M8/100
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι for right and left hand rotation Ι for high-precision motors with hexagonal spindle base
7–16
Ident-No.
174204
Attachment Sleeves and Flanges
997300
Mounting Flanges Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι double end tenoners Ι tempered design Ι edge banding machines Ι mating and seating surfaces Homag, Brandt, IMA ground Ι for mounting of HW scoring saw blades and DP scoring saw blades
Ι for right and left hand rotation Ι for DP circular saw blades the cylindrical head screw IdentNo. 001869 is necessary (to be ordered separately) Ι countersink screw included in delivery
ØD
Ød
Ø d1min L2
L1
L3
DKN
NL
109 109
30 35
65 65
2,2 2,2
95 95
63 63
8x4 10x3,3
6/M5/90 6/M5/90
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Spare parts
ØD
Covers 40 Countersunk Flat Headed for mounting of saw blade Screws for mounting of DP saw Head Cap Screws blades [mm]
Ident-No.
006480 182128
Ø D1
Ød
Class-No.
30
17
997370
181802
995122
180007
995111
001869
[mm]
Ident-No.
[mm]
997300
Attachment Sleeves and Flanges Product
Drawing
Machine / Application
Design
Advantages
Ι for mounting of grooving saw blades, scoring saw blades, clipping saw blades and hoggers
Notes
Ι Ι Ι Ι
ØD
Ød
Ø d1min
L2
L1
DKN
NL
115 115
30 35
80 60
17,7 17,7
96 90
8x3 8x3
8/M8/100 8/M8/100
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
7–17
for right and left hand rotation 1 = hogger sleeve 2 = flange for horizontally tilted motor when working in small distance to chain track Ident-No.
006309 180062
Attachment Sleeves and Flanges
ØD
Ød
Ø d1min
L2
L1
DKN
NL
115 115 115
35 40 40
80 60 80
17,7 17,7 17,7
90 90 96
8x3 8x3 8x3
8/M8/100 8/M8/100 8/M8/100
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
ØD
B
Ød
NL
Class-No.
Ident-No.
137
80
15
6/M5/105
997300
819300 s
[mm]
[mm]
[mm]
flange
Ident-No.
055997 180120 006308
997300
Mounting Flanges Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι edge banding machines Homag, IMA Ι for mounting of clipping saw blades
Ι machine interface HSK 25R
Ι optimum cutting quality thanks to high radial running accuracy and precise tool balancing
Ι for right and left hand rotation Ι countersunk screw and screwdrivers are not included in delivery
ØD
Ød
Ø d1min
L1
a
NL
55 62
HSK 25R HSK 25R
34 40
22 24
20 20
4/M4/44+4/M5/42 4/M5/52
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
179025 177788
Spare parts
Dimension
Class-No.
Screws Shim Rings Locking Rings Countersunk Flat Headed Screws Screwdrivers
M10x1,25x32 SW8 18x25x1,0 DIN 988 25x1,2 DIN 472 M5x10 T20 T20x100
995190 995440 995460 995125 985730
[mm]
7–18
Ident-No.
177780 177781 177782 171236 166092
Attachment Sleeves and Flanges
997300
Mounting Flanges Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι machines Power-Line Homag Ι for mounting of clipping saw blades
Ι machine interface HSK 25R
Ι optimum cutting quality thanks to high radial running accuracy and precise tool balancing
Ι for right and left hand rotation
ØD
Ød
Ø d1min
L1
a
NL
105
HSK 25R
30
23
14
4/M5/52
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
181590
Spare parts
Dimension
Class-No.
Screws Shim Rings Locking Rings Head Cap Screws Screwdrivers
M10x1,25x32 SW8 18x25x1,0 DIN 988 25x1,2 DIN 472 M5x12 DIN 912 SW4x100
995190 995440 995460 995111 985730
[mm]
7–19
Ident-No.
177780 177781 177782 001869 166091
Clamping Systems with cylindrical shank for shank-type tools
Chart Tool Holders machine interface PS 2000-E
7–20
Clamping Systems with cylindrical shank for shank-type tools
933240
Hydro Clamping Chucks PS 2000-E Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι for precise clamping of shanktype tools with cylindrical shank
Ι n max = 25,000 min -1
Ι optimum cutting quality and long tool life thanks to exact radial running accuracy Ι minimization of setup-times thanks to easy and quick tool change
Ι for right and left hand rotation Ι integral part of machine spindle Ι initial purchase through the machine manufacturers Ι axial locking of the tools
ØD
Ød
Ø d1min
L1
a
weight
70
40
25
56
51
1.327
[mm]
[mm]
[mm]
[mm]
[mm]
[kg]
Ident-No.
173752
933280
Reducing Bushings Product
Drawing
Machine / Application
Design
Advantages
Ι for mounting of shank-type Ι tempered-steel bushing slotted tools in Sino, Tribos, PS 2000-E on two sides for shank diameter < 25 mm Ι shank diameter tolerance h7 or g7 Ød
Ø d1min
25 25 25 25 25 25 25 25 25 25 25
6 8 10 12 14 16 18 20
[mm]
[mm]
Ø d1min
Lmin
L1
1/2 5/8 3/4
35 35 35 35 40 40 45 45 35 40 45
56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5
[inch]
[mm]
[mm]
Notes
Ι minimum clamping length Lmin = minimum shaft length
Ident-No.
182304 o 182305 o 182306 182307 182308 o 182309 182310 o 182311 182653 182654 o 182655 o
7–21
Clamping Systems with cylindrical shank for shank-type tools
997800
Adapters with cylindrical shank Product
Drawing
Machine / Application
Design
Advantages
Ι for mounting of shank-type tools in PS 2000-E for shank diameter 6 - 12 mm
Notes
Ι the tool shanks must feature a flat clamping area Ι length adjusting screw Ident-No. 172921 is required for PS 2000-E Ι with length adjusting screw for PS-System Ø 16 mm Ident-No. 172115, Ø 25 mm Ident-No. 172113
Ød
Ø d1min
L2
L1
16 16 16 16 25 25 25 25 25
6,35 8 9,5 10 6 8 9,5 10 12
20 20 20 20 20 20 20 20 20
61 61 61 61 70 70 70 70 70
[mm]
[mm]
[mm]
[mm]
Ident-No.
172112 172117 172118 172119 172103 172104 172105 172101 172102
997300
Adapters with cylindrical shank Product
Drawing
Machine / Application
Design
Ι for PS 2000-E and draw-in collet chuck for the mounting of tools with bore
Ι tool held in place by set screws
Advantages
Notes
Ι for right and left hand rotation Ι length adjusting screw Ident-No. 172921 is required for PS 2000-E Ι included in delivery: mounting arbor, set screws and length adjusting screw for PS-System for shank Ø 16 Ident-No. 172115, shank Ø 25 IdentNo. 172113
7–22
Clamping Systems with cylindrical shank for shank-type tools
ØD
Ød
Ø d1min
L2
L1
L3
Ident-No.
35 35
16 25
20 20
8,5 8,5
68 78.5
43 55
171389 o 171391 o
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Spare parts
Dimension
Class-No.
Ident-No.
Cutter Retaining Bolts Cutter Retaining Bolts Engineers Wrenches
Ø20xM8x23 Ø28xM10x26 24x27 DIN 3110
995190 995190 985730
171393 171392 009193o
[mm]
997300
Adapters with cylindrical shank Product
Drawing
Machine / Application
Design
Ι for PS 2000-E and draw-in collet chuck for the mounting of tools with bore
Ι tool attached and secured against rotation with screws
Advantages
ØD
Ød
Ø d1min
L2
L1
L3
NL
50 50 60 60 66
16 25 25 25 25
22 22 25 30 30
4 4 30 36 5
68 92 111 117 92
45 60 60 60 60
4/M5/34 4/M5/34 6/M6/48 6/M6/48 4/M5/48
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι for right and left hand rotation Ι length adjusting screw Ident-No. 172921 is required for PS 2000-E Ι clamping length L2 = 30 and 36 mm for single- and multipiece cutters and cutterheads Ι clamping length L2 = 4 and 5 mm for circular saw blades and grooving cutters Ι included in delivery: mounting arbor and PS length adjusting screw for shank Ø 25 IdentNo. 172113
7–23
Ident-No.
171227 o 167825 168814 o 168815 171386
Clamping Systems with cylindrical shank for shank-type tools
997300
Adapters with cylindrical shank Product
Drawing
Machine / Application
Design
Ι for PS 2000-E and draw-in collet chuck for mounting of circular saw blades and grooving cutters
Ι secured against rotation with drive pin
Advantages
ØD
Ød
Ø d1min
L2
L1
L3
60 60
16 25
30 30
8 9
78 94
43 55
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι for right and left hand rotation Ι length adjusting screw Ident-No. 172921 is required for PS 2000-E Ι included in delivery: clamping arbor, clamping flange, cap screw and length adjusting screw for PS-System for shank Ø 16 Ident-No. 172115, shank Ø 25 Ident-No. 172113 Ident-No.
for plate thickness max. 6 mm for plate thickness max. 8 mm
171394 167826
933250
Draw-In Collet Chucks with cylindrical shank Product
Drawing
Machine / Application
Design
Ι for mounting of shank-type tools in PS 2000-E
Ι for shank diameter 2-16 mm Ι collet chucks DIN 6388 415 E Ι lock nut with sleeve bearing
Advantages
ØD
Ød
Ø d1min
L2
L1
43 43
16 25
2-16 2-16
50 50
95 105
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι for right and left hand rotation Ι length adjusting screw Ident-No. 172921 is required for PS 2000-E Ι included in delivery: collet chuck adapter with nut and length adjusting screw for PS-System for shank Ø 16 Ident-No. 172115, shank Ø 25 Ident-No. 172113 Ident-No.
170181 170182
7–24
Clamping Systems with cylindrical shank for shank-type tools
Spare parts
Dimension
Class-No.
Ident-No.
ball-bearing lock nuts Hook Wrenches Engineers Wrenches
M30x1,5R SW40/42 DIN 1810 24x27 DIN 3110
995290 985720 985730
178763 169298 009193o
[mm]
933280
Precision Collets Product
Drawing
Machine / Application
Design
Ι for use in PS 2000-E
Ι slotted from top and botom Ι clamping tolerance 0.5 mm Ι according to DIN 6388 415E
Advantages
Notes
Ι for Ident-No. 170181, 170182
ØD
Ø d1min
L1
Ident-No.
25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5
2,5 3 4 4,5 5 6 6,35 7 8 9 9,5 10 12 12,7 13 16
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
820753 o 820754 o 820494 o 830236 o 820495 o 170779 821421 o 829692 o 170780 825190 o 168739 o 170781 168740 830156 o 821221 o 168741
[mm]
[mm]
[mm]
7–25
Clamping Systems with SK and BT shank for shank-type tools
Chart Tool Holders machine interface SK- and BT-Mounting
7â&#x20AC;&#x201C;26
Clamping Systems with SK and BT shank for shank-type tools
933240
Hydro Clamping Chucks PS 2000-E Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι CNC machining centers with automatic tool changer Ι for precise clamping of shanktype tools with cylindrical shank
Ι n max = 25,000 min -1 Ι quick-release taper BT 30 and quick-release taper BT 35 with retaining bolt according to standard MAS 403 Ι quick-release taper SK 30 according to ISO 7388-3 (without retaining bolt - must be ordered separately) Ι quick-release taper SK 30 and SK 40 according to DIN 69871A (with retaining bolt)
Ι minimization of setup-times thanks to easy and quick tool change Ι optimum cutting quality and long edge lives thanks to high concentricity
Ι for right and left hand rotation
ØD
Ød
L2
L1
a
weight
70
55
111
63
1.1
55
111
63
1.1
55
128
60
1.39
70
SK 30 (ISO)25 SK 30 25 (DIN) SK 40 25 (DIN) BT 35 25
55
120
63
1.25
[mm]
[mm]
[mm]
[mm]
[mm]
[kg]
70 70
Ø d1min
[mm]
Retaining Bolts
for SK 30 for SK 40 for SK 30 for SK 30
DIN 69872 A DIN 69872 A ISO 7388-3
for SK 30 for SK 30 for BT35
ISO 7388-3 PT 35T-2
Ident-No.
CMS IMA, Maka, Biesse, Reichenbacher, Weeke IMA, Maka, Reichenbacher, Stegherr Heian
173774 173754 173756 175796
mach.
Class-No.
IMA, Maka, Reichenbacher, Weeke IMA, Reichenbacher, Stegherr CMS, Masterwood Rover old, Biesse up to 08/92 Rover new, Biesse (HSD motor) from 09/92, Masterwood (Colombo motor) Alberti Heian
997870 997870 997870 997870
169293 169294 177021 175637
997870
173641
997870 997870
177020 176103
7–27
Ident-No.
Clamping Systems with SK and BT shank for shank-type tools
933289
Draw-In Collet Chucks with SK shank Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι CNC machining centers with automatic tool changer Ι for clamping of shank-type tools with cylindrical shank
Ι quick-release taper according to DIN 69871 resp. ISO 73883 (without dog and locating grooves) Ι quick-release taper according to Japanese standard MAS - 403 (for Ident-No. 176102) Ι lock nut with sleeve bearing (except for Ident-No. 177304 with ball baring)
Ι minimization of setup-times thanks to easy and quick tool change Ι high cutting quality and long edge lives thanks to high concentricity
Ι for right and left hand rotation Ι included in delivery:collet chuck, clamping nut and retaining bolt
ØD
Ød
norm number
Ø d1min
a
43 60 50
SK 30 (DIN) SK 30 (DIN) SK 30 (ISO)
415 E 462 E 470 E
2-16 2-25 2-20
55 70 58
SW 41 SW 41 SW 41
60
SK 40 (DIN)
462 E
2-25
70
SW 46
60
BT 35
462 E
2-25
70
SW 41
[mm]
[mm]
[mm]
[mm]
Ident-No.
Spare parts
ball-bearing lock nuts lock nut with sleeve bearing Retention knobs Retention knobs Retention knobs Retention knobs Hook Wrenches Hook Wrenches Single-Head Engineers Wrenches Single-Head Engineers Wrenches
Weeke IMA, Maka, Reichenbacher CMS IMA, Maka, Stegherr, Reichenbacher Heian
Class-No.
M30x1,5R M48x2R DIN 69872 A DIN 69872 B ISO 7388-3 PT 35T-2 SW58/62 DIN 1810 SW40/42 DIN 1810 SW46x10 DIN 894 SW41 DIN 894
for Ø D = 43 for Ø D = 60 for SK 30 for SK 40 for SK 30 for BT35 for Ø D = 60 for Ø D = 43
[mm]
7–28
995290 995290 997870 997870 997870 997870 985720 985720 985720 985720
177304 o 173794 180360 o 173795 176102
Ident-No.
178763 178764 169293 179339 177021 176103 169299 169298 178760 169297
Clamping Systems with SK and BT shank for shank-type tools
933280
Precision Collets Product
Drawing
Machine / Application
Design
Advantages
Ι for use in draw-in collet chuck Type 462 E
Ι clamping tolerance 0.5 mm Ι according to DIN 6388 Type 462E
Ι optimum transmission of clamping force thanks to 12 slots from top and bottom
ØD
Ø d1min
L1
34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8
6
[mm]
[mm]
Ø d1min
1/4 8 9,5 10 12 1/2 13 14 5/8 16 18 3/4 20 25 [inch]
Notes
Ident-No.
52 52 52 52 52 52 52 52 52 52 52 52 52 52 52
180213 175815 180358 175817 170782 168742 175820 180215 170783 175823 168743 180216 175826 168744 168745
[mm]
933289
Draw-In Collet Chucks with SK shank Product
Drawing
Machine / Application
Design
Ι CNC machining centers with automatic tool changer Ι for clamping of shank-type tools with cylindrical shank
Ι quick-release taper according Ι minimization of setup-times to DIN 69871 and ISO (without thanks to easy and quick tool dog and locating grooves) change Ι lock nut with sleeve bearing Ι high cutting quality and long edge lives thanks to high concentricity
Advantages
7–29
Notes
Ι for right and left hand rotation Ι collet chucks according to Type 470 E Ø 2..20 mm Ι collet chucks according to Type 472 E Ø 4..25 mm Ι included in delivery:collet chuck, clamping nut and retaining bolt
Clamping Systems with SK and BT shank for shank-type tools
ØD
Ød
Ø d1min
a
type
50 63 63
SK 30 (DIN) SK 30 (DIN) SK 30 (ISO)
2-20 4-25 4-25
50 57 64
470 E 472 E 472 E
[mm]
[mm]
[mm]
[mm]
Ident-No.
Biesse Biesse CMS
173639 175790 180361
Spare parts
Lock Nuts lock nuts with sleeve bearing Retention knobs Retention knobs Retention knobs Hook Wrenches Hook Wrenches
M40x1,5R M50x1,5R
for Ø D = 50 for Ø D = 63 HSD motor for Biesse as from 09/92 for Biesse up to 08/92 for SK 30 for Ø D = 50 for Ø D = 63
ISO 7388-3 SW45/50 DIN 1810 SW58/62 DIN 1810
Class-No.
Ident-No.
995290 995290 997870 997870 997870 985720 985720
178761 178762 o 173641 175637 177021 175851 169299
[mm]
933289
Draw-In Collet Chucks with SK shank Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι CNC machining centers with automatic tool changer Ι for clamping of shank-type tools with cylindrical shank
Ι quick-release taper according to SK 30 with ring gear Ι lock nut with sleeve bearing
Ι minimization of setup-times thanks to easy and quick tool change Ι high cutting quality and long edge lives thanks to high concentricity
Ι for right and left hand rotation Ι replaceble retaining bolt Ι collet chucks according to Type 462 E Ø 4..25 mm Ι collet chucks according to Type 470 E Ø 2..20 mm Ι included in delivery:collet chuck, clamping nut and retaining bolt
ØD
Ød
Ø d1min
a
type
50 60
SK 30 SK 30
2-20 4-25
55 72
470 E 462 E
[mm]
[mm]
[mm]
[mm]
Ident-No.
SCM, Morbidelli SCM, Morbidelli
Spare parts
Lock Nuts lock nut with sleeve bearing Retention knobs Hook Wrenches Hook Wrenches Single-Head Engineers Wrenches Single-Head Engineers Wrenches
173644 175792
Class-No.
M40x1,5R M48x2R Ø8,5 SW45/50 DIN 1810 SW58/62 DIN 1810 SW36 DIN 894 SW46x10 DIN 894
for Ø D = 50 for Ø D = 60 for Ø D = 50 for Ø D = 60 for Ø D = 50 for Ø D = 60
[mm]
7–30
995290 995290 997870 985720 985720 985720 985720
Ident-No.
178761 178764 173646 175851 169299 169296 178760
Clamping Systems with SK and BT shank for shank-type tools
933280
Precision Collets Product
Drawing
Machine / Application
Design
Ι for use in draw-in collet chuck Type 430 E / 470 E / 472 E
Ι slotted from top and botom Ι clamping tolerance 1 mm
ØD
Ø d1min
L1
type
33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 41 41 41 41 41 41 41 41 41 41 41 41 41 26 26 26 26 26 26
3 4 5 6 7 8 10 12 13 14 16 18 19 20
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 46 46 46 46 46 46 46 46 46 46 46 46 46 34 34 34 34 34 34
470 E 470 E 470 E 470 E 470 E 470 E 470 E 470 E 470 E 470 E 470 E 470 E 470 E 470 E 470 E 470 E 470 E 470 E 472 E 472 E 472 E 472 E 472 E 472 E 472 E 472 E 472 E 472 E 472 E 472 E 472 E 430 E 430 E 430 E 430 E 430 E 430 E
[mm]
[mm]
Ø d1min
1/4 1/2 5/8 3/4 6 8 10 12 16 18 20 25 1/4 1/2 5/8 3/4 1 6 8 10 12 14 16 [inch]
Advantages
Notes
Ι Type 430 E (ER 25) 6 - 16 mm for special chuck Ι Type 470 E (ER 32) 3 - 20 mm Ι Type 472 E (ER 40) 6 - 25 mm Ident-No.
173647 o 173648 o 173649 o 173650 o 173651 o 173652 173653 173654 173655 o 173656 o 173657 173658 o 173659 o 173660 175829 175830 175831 # 175832 o 180912 o 180913 o 180914 o 175833 175834 175835 o 175836 175837 175838 o 175839 o 175840 o 175841 o 175842 o 181986 o 181987 o 181988 o 181989 o 181990 o 181991 o
[mm]
7–31
Clamping Systems with SK and BT shank for shank-type tools
997870
Retaining Bolts Product
Machine / Application
Drawing
Design
Advantages
norm number
type
DIN 69872 A DIN 69872 A DIN 69872 B
for SK 30
1 2 2 3
for SK 30
4
Notes
Ι for use in Hydro clamping chuck PS 2000-E, adapter and draw-in collet chuck with SK + BT-shank
for SK 40 with ventilation
for SK 30 for SK 30 (ISO) retaining bolt Ø 8.5 mm for BT 30 stop screw stop screw stop screw
ISO 7388-3 ISO 7388-3 P 30T-2 PT 35T-2
5 12 6 7 8 9 10 11
7–32
Ident-No.
IMA, Maka, Reichenbacher, Weeke IMA, Reichenbacher, Stegherr IMA, Reichenbacher, Stegherr, Maka Rover old, Biesse up to 08/92 Rover new, Biesse (HSD motor) from 09/92, Masterwood (Colombo motor) Alberti CMS, Masterwood Morbidelli, SCM Shoda Heian PS-System PS 2000-E draw-in collet chuck
169293 169294 179339 175637 173641 177020 177021 173646 176200 176103 172113 172921 172828
Clamping Systems with SK and BT shank for tools with bore
997300
Adapters with SK shank Product
Drawing
Machine / Application
Design
Ι CNC machining centers with automatic tool changer Ι for precise mounting of tools with bore
Ι clamping length L2 = 50 mm for multiple-part cutters and cutterheads Ι quick-release taper according to DIN 69871 (without dog and locating grooves) Ι tool attached and secured against rotation with screws
Advantages
ØD
Ød
Ø d1min
L2
L1
a
NL
60 60 60
SK 30 SK 30 SK 40
25 30 30
55 55 55
147.8 147.8 168.4
100 100 100
6/M6/48 2/M6/48+2/6/48 2/M6/48+2/6/48
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Spare parts
Retention knobs Retention knobs
Notes
Ι for right and left hand rotation Ι with retaining bolt according to DIN 69872 for SK 30 type A, SK 40 type B Ι machines SK 30: IMA, Maka, Reichenbacher, Weeke Ι machines DK 40: IMA, Maka, Reichenbacher, Stegherr Ident-No.
168800 # 182167 o 182168 o
Class-No.
DIN 69872 A DIN 69872 B
for SK 30 for SK 40
7–33
997870 997870
Ident-No.
169293 179339
Clamping Systems with HSK shank for shank-type tools
Chart Tool Holders machine interface HSK-Mounting
7â&#x20AC;&#x201C;34
Clamping Systems with HSK shank for shank-type tools
933240
Hydro Clamping Chucks PS 2000-E with HSK shank Product
Drawing
Machine / Application
Design
Ι CNC machining centers with automatic tool changer Ι for precise clamping of shanktype tools with cylindrical shank
Ι n max = 25,000 min -1 Ι minimization of setup-times Ι interface DIN 69893 HSK 63 F thanks to easy and quick tool change Ι optimum cutting quality and long edge lives thanks to high concentricity Ι optimum torque transfer
Advantages
Notes
ØD
Ød
Ø d1min L2
L1
a
x
weight
63
HSK 63F
25
55
104.9
80
18
1.4
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[kg]
Ι for right- and lefthand rotation Ι with bore for installation of micro chips for electronic tool detection Ι x = impressurement by means of screwdriver
Ident-No.
IMA from 01/95, Homag, Hüllhorst, EIMA, MAKA, HOLZ-HER
178724
933299
Tribos Pressure Shrinking Chucks Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι CNC machining centers with automatic tool changer Ι for precise clamping of shanktype tools with cylindrical shank
Ι n max = 40,000 min-1
Ι low weight is easy on machine bearing Ι suitable for high RPM´s Ι optimum chip extraction thanks to slim design Ι increased process safety, long edge lives and high machining quality thanks to very high concentricity and repeating accuracy (< 0.003 mm)
Ι for right and left hand rotation Ι different diameters upon request Ι allowed projection: 4xd1 Ι clamping of the tools by means of the clamping device Ι can also be done at LEUCO upon request Ι delivery without retaining bolts; please choose retaining bolts according to the machine (see page with retaining bolts)
ØD
Ød
Ø d1min
L2
L1
a
x
weight
19 26 30 35
HSK 63F HSK 63F HSK 63F HSK 63F
12 16 20 25
48,5 48,5 52,9 55
100 100 100 100
75 75 75 75
18 18 18 18
0.69 0.74 0.77 0.79
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[kg]
7–35
Ident-No.
180257 180899 180258 180710
Clamping Systems with HSK shank for shank-type tools
ØD
Ød
35
HSK 63E 25 SK 30 20 (DIN) SK 30 25 (DIN) SK 30 (ISO)25 SK 40 20 (DIN) SK 40 25 (DIN)
30 35 35 30 35 [mm]
[mm]
Ø d1min
[mm]
L2
L1
a
x
weight
Ident-No.
55
100
75
18
0.79
55
127
80
180888
55
127
80
180836
55
127
80
180843
52
148
80
180891
55
148
80
180837
[mm]
[mm]
[mm]
180885
[mm]
[kg]
Ø d1
L1
Class-No.
Ident-No.
1/2 5/8 3/4
45 45 45 45 45 50.5 50.5 50.5 50.5 50.5 50.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5
933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280
182469 o 182470 o 182471 o 182472 o 182473 o 182474 o 182475 o 182476 o 182477 o 182478 o 182479 o 182304 o 182305 o 182306 182307 182308 o 182309 182310 o 182311 182653 182654 o 182655 o
[inch]
[mm]
Spare parts
Class-No.
Ident-No.
Mounting Devices (manual) Mounting Devices (automatic) Adjustment Inserts Adjustment Inserts Adjustment Inserts Adjustment Inserts Length Adjusting Gauges Interface Cables for Adjusting Gauges
985201 985201 955530 955530 955530 955530 985300 985300
180261 181159o 180263 180902 180264 180711 180828o 180829o
Spare parts
Ød
Ø d1
Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings
12 12 12 12 12 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25
3 4 5 6 8 6 8 10 12 14 16 6 8 10 12 14 16 18 20
[mm]
[mm]
for Ø d = 12 for Ø d = 16 for Ø d = 20 for Ø d = 25 without interface cable for RS 232C interface
7–36
Clamping Systems with HSK shank for shank-type tools
933299
Tribos Pressure Shrinking Chucks with SK shank Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι CNC machining centers with automatic tool changer Ι for precise clamping of shanktype tools with cylindrical shank
Ι n max = 40,000 min-1
Ι low weight is easy on machine bearing Ι suitable for high RPM´s Ι optimum chip extraction thanks to slim design Ι increased process safety, long edge lives and high machining quality thanks to very high concentricity and repeating accuracy (< 0.003 mm)
Ι for right- and lefthand rotation Ι different diameters upon request Ι allowed projection: Ι clamping of the tools by means of the clamping device Ι can also be done at LEUCO upon request Ι included in delivery: without retaining bolts; please choose retaining bolts according to the machine (see page with retaining bolts)
ØD
Ød
Ø d1min
L2
L1
a
x
weight
19 19 25 25 30 35
SK 30 SK 30 SK 30 SK 30 SK 30 SK 30
12 12,7 16 19,05 20 25
47 47 48 48 52 55
127.85 127.85 127.85 127.85 127.85 127.85
80 80 80 80 80 80
10 10 10 10 10 10
0.6 0.7 0.7 0.7 0.7 0.7
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[kg]
Ø d1
L1
Class-No.
Ident-No.
1/2 5/8 3/4
45 45 45 45 45 50.5 50.5 50.5 50.5 50.5 50.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5
933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280
182469 o 182470 o 182471 o 182472 o 182473 o 182474 o 182475 o 182476 o 182477 o 182478 o 182479 o 182304 o 182305 o 182306 182307 182308 o 182309 182310 o 182311 182653 182654 o 182655 o
[inch]
[mm]
Spare parts
Ød
Ø d1
Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings
12 12 12 12 12 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25
3 4 5 6 8 6 8 10 12 14 16 6 8 10 12 14 16 18 20
[mm]
[mm]
7–37
Ident-No.
180895 o 181529 o 180896 o 181530 o 180897 180898
Clamping Systems with HSK shank for shank-type tools
Spare parts
Class-No.
Ident-No.
Mounting Devices (manual) Mounting Devices (automatic) Adjustment Inserts Adjustment Inserts Adjustment Inserts Adjustment Inserts Length Adjusting Gauges Interface Cables for Adjusting Gauges
985201 985201 955530 955530 955530 955530 985300 985300
180261 181159o 180263 180902 180264 180711 180828o 180829o
for Ø d = 12 for Ø d = 16 for Ø d = 20 for Ø d = 25 without interface cable for RS 232C interface
933289
Sino Chucks with HSK-Shank Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι CNC machining centers with automatic tool changer Ι for precise clamping of shanktype tools with cylindrical shank
Ι precision tool-holding system with expansion technology Ι n max = 40,000 min-1
Ι flexible utilization by intermediate sleeves Ι optimum cutting quality and long edge lives thanks to high concentricity Ι high radial stiffness Ι excellent damping thanks to polymeric expansion ring Ι safe clamping thanks to high clamping force
Ι for right and left hand rotation Ι clamping and opening with „C“- spanner DIN1810B Nr. 182 153 (not included in delivery) Ι for chucks D 25 mm sleeves of PS 2000-E system can be used Ι for mounting of the tools the chuck needs to fixed in an assembly device
ØD
Ød
Ø d1min
L2
L1
a
39 48.5 48.5 48.5 39 48 48.5
HSK 63F HSK 63F HSK 63F HSK 63F HSK 63F HSK 63F HSK 63F
12 16 20 25 12,7 19,05 25,4
47 50 52 58 47 52 58
104.9 109.9 109.9 109.9 104.9 109.9 109.9
80 85 85 85 80 85 85
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
182149 182150 182151 182152 182615 182638 o 182639 o
Spare parts
Ød
Ø d1
Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings
12 12 12 12 12 12 20 20 20 20 20 20
3 4 5 6 8 10 6 8 10 12 14 16
[mm]
[mm]
Ø d1
[inch]
7–38
L1
Class-No.
Ident-No.
45 45 45 45 45 45 50.5 50.5 50.5 50.5 50.5 50.5
933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280
182154 o 182155 o 182156 o 182157 o 182158 o 182159 o 182160 o 182161 o 182162 o 182163 o 182164 o 182165 o
[mm]
Clamping Systems with HSK shank for shank-type tools
Spare parts
Ød
Ø d1
Ø d1
L1
Class-No.
Ident-No.
Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings Reducing Bushings
25 25 25 25 25 25 25 25 25 25 25
6 8 10 12 14 16 18 20 1/2 5/8 3/4
56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5
933280 933280 933280 933280 933280 933280 933280 933280 933280 933280 933280
182304 o 182305 o 182306 182307 182308 o 182309 182310 o 182311 182653 182654 o 182655 o
[mm]
[mm]
[inch]
[mm]
Spare parts
Class-No.
Ident-No.
Mounting Devices BIG Mounting Devices Tool Boy fit-up aid „C“- spanner long handhold Bush Extractors
985202 985202 985700 985720 985720
182166o 180366 880319 182672 182192o
SW45-50 DIN 1810B [mm]
933289
Draw-In Collet Chucks with HSK shank Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι CNC machining centers with automatic tool changer Ι for precise clamping of shanktype tools with cylindrical shank
Ι interface according to DIN 69893 HSK 50F, HSK 63F and HSK 63E Ι lock nut with sleeve bearing
Ι flexible utilization by collet chucks
Ι for right and left hand rotation Ι Ident-No. 175795 for IMA (up to 12/94) similar to DIN 69893 Ι Ø d1 = collet chuck diameter 2 - 25 mm Ι collet chucks according to DIN 6388: 1) Type 462E / 2) Type 472E Ι included in delivery: collet chuck, clamping nut without spanner wrench
ØD
Ød
Ø d1min
L1
a
x
type
60 60
HSK 50F HSK 50F
2-25 2-25
95 135
75 115
18 18
1 1
60
HSK 63F
2-25
101
76
18
1
63 60
HSK 63E HSK 63F
2-25 2-25
103 101
78 76
18 9
2 1
60
HSK 63F
2-25
140
115
18
1
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
7–39
Ident-No.
Weeke, Eima, Dubus Weeke, Dubus Homag, IMA from 01/95, Weeke from 03/98, HOLZ-HER, SCM CMS IMA up to 12/94 Homag, IMA from 01/95, Weeke from 03/98, HOLZ-HER
178497 o 178498 o 173293 180359 o 175795 179170
Clamping Systems with HSK shank for shank-type tools
Spare parts
Dimension
Class-No.
lock nut with sleeve bearing Hook Wrenches Single-Head Engineers Wrenches
M48x2R SW58/62 DIN 1810 SW46x10 DIN 894
995290 985720 985720
Ident-No.
178764 169299 178760
[mm]
933280
Precision Collets Product
Drawing
Machine / Application
Design
Advantages
Ι for use in draw-in collet chuck Type 462 E
Ι clamping tolerance 0.5 mm Ι according to DIN 6388 Type 462E
Ι optimum transmission of clamping force thanks to 12 slots from top and bottom
ØD
Ø d1min
L1
34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8 34.8
6
[mm]
[mm]
Ø d1min
1/4 8 9,5 10 12 1/2 13 14 5/8 16 18 3/4 20 25 [inch]
Notes
Ident-No.
52 52 52 52 52 52 52 52 52 52 52 52 52 52 52
180213 175815 180358 175817 170782 168742 175820 180215 170783 175823 168743 180216 175826 168744 168745
[mm]
7–40
Clamping Systems with HSK shank for tools with bore
997300
Hydro Tensile Spindles HSK 63 F Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι CNC machining centers with automatic tool changer Ι for precise clamping of tools with bore
Ι with hydro-tensile spindle Ι clamping length L2 = 50 mm for cutters and cutterheads Ι interface DIN 69893 HSK 63 F for highly precise mounting on the machine spindle
Ι precise mounting of tools with bore thanks to hydro-tensile spindle
Ι for right and left hand rotation Ι max. tool weight 4.5kg
ØD
Ød
Ø d1min
L2
L1
a
x
63
HSK 63F
30
50
125
50
18
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
179472 #
Spare parts
Dimension
Class-No.
Cutter Retaining Bolts Cutter Retaining Bolts Rubber Rings
M8x58,5 DIN 7984 M8x88,5 DIN 7984 8x13x2
995111 995111 955510
Ident-No.
180049 180050 180051
[mm]
997300
Mounting Arbors with HSK shank Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι CNC machining centers with automatic tool changer Ι for precise mounting of tools with bore with double keyway
Ι with 6 pin holes M6 - 8 mm deep TK 48 mm Ι interface DIN 69893 HSK 63 F Ι clamping length L2 = 50 mm for multiple-part cutters and cutterheads Ι secured against rotation with double key
Ι high feed rates thanks to optimum torque transfer
Ι for right and left hand rotation Ι spacer ring Ident-No. 181193 consists of: 1 piece 20 mm thick, 1 piece 10 mm thick, 3 piece 5 mm thick, 2 piece 2 mm thick, 1 piece 1 mm thick Ι spacer ring set Ident-No. 181194 additionally 1 piece 20 mm thick, 1 piece 10 mm thick Ι tool attached with retaining bolt Ι included in delivery: clamping arbor with retaining bolt
7–41
Clamping Systems with HSK shank for tools with bore
ØD
Ød
Ø d1min L2
L1
a
x
DKN
63 63
HSK 63F HSK 63F
30 30
50 80
125 155
50 50
18 18
8x3 8x3
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
Homag, IMA from 01/95 Homag, IMA from 01/95, HOLZ-HER
Spare parts
Dimension
Class-No.
Single-Head Engineers Wrenches Cutter Retaining Bolts Spacer Sets Spacer Sets
SW46x10 DIN 894 M16x26xØ42 60x50x30 60x80x30
985720 995190 955521 955521
178693 178641
Ident-No.
178760 173592 181193 181194
[mm]
997300
Milling Assemblies with chip directing steel sheet Product
Drawing
Machine / Application
Design
Ι CNC-machining centers with C-axis Homag Ι for precise mounting of tools with bore
Ι milling aggregate with Ι optimized chip removal integrated chip directing steel sheet Ι Ident-No. 182049 and 182050 with double keyway Ι Ident-No. 182075 and 182076 with lid and retaining bolt; 2 carrier pins Ø6 TK 48 Ι n max = 11,000 min-1 (stock design) Ι shank 30 mm, shank length 105 mm
Advantages
Ø Dmax
Ød
Ø d1min
L2
a
DKN
300 300
HSK 63F HSK 63F
30 30
105 105
80 80
8x4
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ι weight of the component approx. 2 kg (depending on design) Ι max. weight of the clamped tool 3,8 kg
Ident-No. [L]
Homag Homag
7–42
182049 o 182075 o
Ident-No. [R]
182050 o 182076 o
Clamping Systems with HSK shank for tools with bore
997300
Saw Blade Adapters HSK 63F Product
Drawing
Machine / Application
Design
Ι CNC machining centers with automatic tool changer Ι for precise mounting of circular saw blades
Ι interface DIN 69893 HSK 63 F modified for high-precision adapter to the machine spindle
Advantages
Notes
ØD
Ød
Ø d1min
L2
L1
a
x
NL
106
HSK 63F
30
2,5
78
40
18
8/M5/90
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ι for right and left hand rotation Ι mounting of the saw directly by means of countersunk screw or lid by means of cylinder head screw Ι included in delivery: lid, countersunk screws and cylinder head screw Ident-No.
182174
Spare parts
Dimension
Class-No.
Countersunk Flat Headed Screws Head Cap Screws
M5x8 T20 M5x16 DIN EN ISO 4762
995125 995111
Ident-No.
164005 001870
[mm]
997300
Mounting Arbors HSK 63F Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι through-feed machines with tool changer Homag Ι for precise clamping of tools with bore
Ι with pulling grooves Ι flange with fastening screw thread Ι interface DIN 69893 HSK 63 F for highly precise mounting on the machine spindle
Ι quick tool change
Ι for right and left hand rotation
ØD
Ød
Ø d1min
L2
L1
a
NL
63
HSK 63F
35
50
129
54
8/M8/80
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Spare parts
Head Cap Screws
Ident-No.
182124
Dimension
Class-No.
Ident-No.
M16x30
995111
182126o
[mm]
7–43
Clamping Systems with HSK shank for tools with bore
Spare parts
Covers
Dimension
Class-No.
Ident-No.
60x15x17
997370
182127o
[mm]
997300
Mounting Arbors HSK 63F Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι through-feed machines with tool changer Homag Ι for precise clamping of tools with bore
Ι with pulling grooves Ι with lid and screw (included in delivery) Ι interface DIN 69893 HSK 63 F modified for high-precision adapter to the machine spindle
Ι quick tool change
Ι for right and left hand rotation
ØD
Ød
Ø d1min
L2
L1
a
63 63
HSK 63F HSK 63F
35 35
40 70
119 149
54 54
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
182123 182125
Spare parts
Dimension
Class-No.
Ident-No.
Head Cap Screws Covers
M16x30 60x15x17
995111 997370
182126o 182127o
[mm]
997300
Hydro Tensile Spindles Weinig HSK Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι planing machines Weinig Powermat Ι for precise clamping of tools with bore
Ι with hydro-tensile spindle
Ι precise mounting of tools with bore thanks to hydro-tensile spindle
Ι for right and left hand rotation Ι accessories: dummy piece for covering the HSK-interface on spindles not used
ØD
Ød
Ø d1min
L2
L1
a
85 85 85
Weinig HSK Weinig HSK Weinig HSK
30 30 40
40 55 55
108 123 123
26 26 26
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
7–44
Ident-No.
181872 o 181873 o 181874 o
Clamping Systems with HSK shank for tools with bore
Spare parts
Class-No.
Ident-No.
Dummy Pieces (cover)
997300
182286 o
997300
Hydro Tensile Spindles Weinig HSK Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι planing machines Weinig Powermat Ι for precise clamping of tools with bore
Ι with hydro-tensile spindle
Ι precise mounting of tools with bore thanks to hydro-tensile spindle
Ι for right and left hand rotation Ι accessories: dummy piece for covering the HSK-interface on spindles not used
ØD
Ød
Ø d1min
L2
L1
a
85 85 85
Weinig HSK Weinig HSK Weinig HSK
40 50 50
170 170 210
238 238 278
26 26 26
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
181875 o 181877 o 181973 o
Spare parts
Class-No.
Ident-No.
Dummy Pieces (cover)
997300
182286 o
997300
Mounting Arbors Weinig HSK Product
Drawing
Machine / Application
Design
Notes
Advantages
Ι profile machines Weinig Powermat Ι for mounting of tools with bore
Ι for right and left hand rotation Ι other dimensions upon request Ι for permissible RPM please refer to diagram
ØD
Ød
Ø d1min
L2
L1
a
NL
weight
85 85 85
Weinig HSK Weinig HSK Weinig HSK
30 30 30
40 60 80
98 118 138
26 26 26
2/6/48+2/M6/48 2/6/48+2/M6/48 2/6/48+2/M6/48
1.7 1.8 1.9
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
7–45
[kg]
Ident-No.
182056 o 182057 o 182058 o
Clamping Systems with HSK shank for tools with bore
ØD
Ød
Ø d1min
L2
L1
a
NL
weight
85 85 85 85 85 85 85 85 85
Weinig HSK Weinig HSK Weinig HSK Weinig HSK Weinig HSK Weinig HSK Weinig HSK Weinig HSK Weinig HSK
30 30 30 40 40 40 40 40 40
130 170 240 40 60 80 130 170 240
188 228 298 98 118 138 188 228 298
26 26 26 26 26 26 26 26 26
2/6/48+2/M6/48 2/6/48+2/M6/48 2/6/48+2/M6/48 2/6/54+2/M6/54 2/6/54+2/M6/54 2/6/54+2/M6/54 2/6/54+2/M6/54 2/6/54+2/M6/54 2/6/54+2/M6/54
2.2 2.4 2.8 1.9 2.1 2.3 2.8 3.2 3.9
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
182059 o 182060 o 182061 o 182062 o 182063 o 182064 o 182065 o 182066 o 182067 o
[kg]
Adapter Weinig HSK Diagram for PowerLock-Adapter 45 6000 U/min 40 8000 U/min L2
Permissible maximum weight [kg]
35
30
25 10000 U/min
20 12000 U/min 15
10
5 0
50
100
150
200
Tool length L2 [mm]
7–46
250
300
Clamping Systems with MK shank for shank-type tools
933250
Draw-In Collet Chucks with MK shank Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι CNC machining centers Ι routers Ι for precise clamping of shanktype tools with cylindrical shank
Ι lock nut with sleeve bearing
Ι high concentricity thanks to ball-bearing mounted lock nut
Ι for right and left hand rotation Ι collet chucks DIN 6388 Type 415 E Ι included in delivery: collet chuck with lock nut
ØD
Ød
Ø d1min
L1
a
type
43
MK 2
2-16
119
50
415 E
[mm]
[mm]
[mm]
[mm]
[mm]
Ident-No.
170784
Spare parts
Dimension
Class-No.
Union Nuts ball-bearing lock nuts Hook Wrenches
W 1 1/8“/M30x1,5 M30x1,5R SW40/42 DIN 1810
995290 995290 985720
[mm]
7–47
Ident-No.
165561 178763 169298
Clamping Systems with MK shank for shank-type tools
933280
Precision Collets Product
Drawing
Machine / Application
Design
Ι for use in draw-in collet chuck Type 415 E
Ι slotted from top and botom Ι clamping tolerance 0.5 mm Ι according to DIN 6388 Type 415E
Advantages
Notes
ØD
Ø d1min
L1
Ident-No.
25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5
2,5 3 4 4,5 5 6 6,35 7 8 9 9,5 10 12 12,7 13 16
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
820753 o 820754 o 820494 o 830236 o 820495 o 170779 821421 o 829692 o 170780 825190 o 168739 o 170781 168740 830156 o 821221 o 168741
[mm]
[mm]
[mm]
7–48
Clamping Systems for Drill Bits
933350
Clamping Chuck Combi Systems Product
Drawing
Machine / Application
Design
Ι for mounting of drill bits with cylindrical shank and clamping surface
Ι drill bits are clamped with setscrews
Advantages
ØD
Ø d1min
L2
L
a
type
15 15 15 15 15 19 19 19 19 19 19 19 19 19
8 8 8 8 8 10 10 10 10 10 10 10 10 10
20 20 20 20 20 20 20 20 20 20 20 20 20 20
22 24.5 24.5 24.5 37 24.5 24.5 24.5 25 47 29.3 28.5 37 47
2 4.5 4.5 4.5 17 4.5 4.5 4.5 5 27 9.3 8.5 17 27
D A B C C A B C D G F E C D
[mm]
[mm]
[mm]
[mm]
[mm]
BSS
Notes
Ι clamping chucks with „BSS“ mark are compatible with quick-changing system for drill bits Ι for threaded shank design and appropriate machines see technical information Ident-No. [L]
161282 010683 161285 058412 059300 003575 008003 058414 003571 161287 003573 161987 161681 170372 #
Spare parts
Dimension
for Ø D
Class-No.
Set Screws Set Screws Set Screws
M6x4 DIN EN ISO 4029 M6x5 DIN EN ISO 4029 M5x4 DIN EN ISO 4029
15 19 15
995161 995161 995161
[mm]
[mm]
7–49
Ident-No. [R]
161281 010677 161284 058411 059299 003574 008002 058413 003570 161286 003572 161283 161680 170371 s
Ident-No.
167068 165049 001608
Clamping Systems for Drill Bits
933321
Klack Quick-Changing Chucks Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι boring machines Ι for mounting of drill bits with cylindrical shank and clamping surface
Ι for clamping of the drill bit with hex socket setscrews
Ι low downtimes thanks to fast drill bit changes
Ι for small hole pitch widths (19 mm) Ι top part is drill bit seat Ι bottom part to install on the machine spindle Ι for threaded shank design and appropriate machines see technical information
ØD
Ø d1min
L1
Ident-No.
15
8
35
[mm]
[mm]
[mm]
bottom part
Type
a
Class-No.
A C
19 19
933322 933322
162014
Ident-No. [L]
Ident-No. [R]
162015 162017
162016 162018
[mm] Spare parts
Dimension
Class-No.
Springs Set Screws Cranked Wrench Keys
0,8 DIN 17223 M5x4 DIN EN ISO 4029 SW2,5 DIN ISO 2936
995790 995161 985730
Ident-No.
162948 001608 009671
[mm]
933321
Klack Quick-Changing Chucks Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι boring machines Nottmeyer Ι for mounting of drill bits with cylindrical shank and clamping surface
Ι for clamping of the drill bit with hex socket setscrews
Ι low downtimes thanks to fast drill bit changes
Ι for medium hole pitch widths (25 mm) Ι top part is drill bit seat Ι bottom part to install on the machine spindle Ι for threaded shank design and appropriate machines see technical information
7–50
Clamping Systems for Drill Bits
ØD
Ø d1min
L1
Ident-No.
22 22
10 8
47 49
[mm]
[mm]
[mm]
bottom part
Type
a
Class-No.
C
19
933322
166992 166074
Ident-No. [L]
Ident-No. [R]
166075
166076
[mm] Spare parts
Multi-Purpose Greases Special Levers Set Screws Set Screws O-Rings
Dimension
Class-No.
Ident-No.
M5x4 DIN EN ISO 4029 M6x5 DIN EN ISO 4029 10,77x2,62
993520 997100 995161 995161 995490
056746 166095o 001608 165049 166078
[mm]
933321
Klack Quick-Changing Chucks Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι boring machines Ι for mounting of drill bits with cylindrical shank and clamping surface
Ι for mounting of drill bits with cylindrical shank and clamping surface
Ι low downtimes thanks to fast drill bit changes
Ι for larger hole pitch widths (32 mm) Ι top part is drill bit seat Ι bottom part to install on the machine spindle Ι for threaded shank design and appropriate machines see technical information
ØD
Ø d1min
L1
Ident-No.
30
10
44
[mm]
[mm]
[mm]
bottom part
Type
a
Class-No.
D A
26.5 19
933322 933322
003567
Ident-No. [L]
Ident-No. [R]
003561 003565
003560 003564
[mm] Spare parts
Multi-Purpose Greases Special Levers Reducing Bushings Set Screws Set Screws Screws Screws
Dimension
Class-No.
M6x5 DIN EN ISO 4029 M5x8 DIN EN ISO 4028 M8x24L M8x24R
993520 997100 955530 995161 995161 995191 995191
[mm]
7–51
Ident-No.
056746 164309 057513 165049 180015 180013 180012
Clamping Systems for Drill Bits
933321
Drill Bit Quick-Changing Systems - top part Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι boring machines Ι for mounting of drill bits with cylindrical shank with collet chuck or clamping screws
Ι for clamping of the drill bit with hex socket setscrews
Ι low downtimes thanks to fast drill bit changes
Ι for larger hole pitch widths (32 mm) Ι top part is drill bit seat Ι bottom part to install on the machine spindle Ι for threaded shank design and appropriate machines see technical information
Dimension
type
Ø2,5 / 3 Ø10 Ø8
1 2 2
collet chuck adapter locating bore locating bore
Ident-No.
168664 # 168669 168668
[mm] Spare parts
Dimension
Class-No.
Ident-No.
collet chuck collet chucks Engineers Wrenches Engineers Wrenches Engineers Wrenches
Ø3 Ø2,5 9x11 DIN 3118 11x13 DIN 3118 14x17 DIN 3118
933380 933380 985720 985720 985720
168666 168665 168672o 168670o 168671
Ident-No.
[mm] Spare parts
Dimension
Class-No.
Set Screws Set Screws
M6x5 DIN EN ISO 4029 M5x4 DIN EN ISO 4029
995161 995161
165049 001608
[mm]
933322
Drill Bit Quick-Changing Systems - bottom part Product
Drawing
Machine / Application
Design
Ι boring machines Ι for installation on the machine spindle
Ι conical design
Advantages
Notes
Ι for threaded shank design and appropriate machines see technical information
7–52
Clamping Systems for Drill Bits
type
Ød
Ø D1
C D
M8 M10
9 11
[mm]
[mm]
Ident-No. [L]
Ident-No. [R]
168662 170243
168663 170242
Spare parts
Class-No.
Ident-No.
dust protection cap Socket Wrenchs
997800 985730
170283 168673&
933389
Adapters Product
Drawing
Machine / Application
Design
Ι for mounting of twist drills in combi chuck and Klack chuck
Ι shank with clamping surface
Advantages
ØD
Ød
Ø d1min
L
L1
15 15 15 15 15 15
10 10 10 10 10 10
2 2,5 3 3,5 4 5
19 19 19 19 19 19
38 38 38 38 38 38
[mm]
[mm]
[mm]
[mm]
[mm]
Notes
Ident-No.
180407 168634 168635 180408 168636 180409
Spare parts
Dimension
Class-No.
Set Screws Cranked Wrench Keys
M6x6 DIN EN ISO 4029 SW3 DIN ISO 2936
995161 985730
[mm]
7–53
Ident-No.
180003 009672
Clamping Systems for Drill Bits
933359
Drill Bit Quick-Changing Systems Product
Drawing
Machine / Application
Design
Ι boring machines Ι CNC machining centers Ι for mounting of drill bits with cylindrical shank and clamping surface
Advantages
Notes
Ι low downtimes thanks to fast drill bit changes Ι no special adjustment screw necessary Ι suitable for all standard drill bits with shank Ø 10 mm
Ι for threaded shank design and appropriate machines see Technical Information
ØD
Ø D1
Ød
Ø d1min
L1
L3
type
20 20 20 20 20
9
M8 M8 10 M10 M10
10 10 10 10 10
42 42 45 42 42
15 15 18 15 15
C A
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
11
D B
7–54
Ident-No. [L]
182396 o 182398 o 182400 o 182402 o 182404 o
Ident-No. [R]
182395 o 182397 o 182399 o 182401 o 182403 o
Clamping Systems for Drill Bits
933390
Universal Drill Chucks with SK-shank or HSK shank Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι CNC machining centers with automatic tool changer Ι for clamping of drill bits with cylindrical shank
Ι continuously adjustable clamping area between 1-13 mm Ι n max = 20,000 min-1 Ι hardened clamping jaws
Ι fine balance is easy on spindle and spindle bearing Ι high clamping accuracy over total lifetime of drill chuck thanks to hardened clamping jaws Ι high holding moment Ι no chips and dirt in the clamping zone thanks to special clamping jaws
Ι for right and left hand rotation Ι included in delivery: clamping key, retaining bolts
ØD
Ø d1min
L1
1-13
90
Weeke, Maka, Reichenbacher
180375 o
1-13 1-13 1-13
90 90 90
Biesse from 9/92, Masterwood (HSD motors) Alberti, Masterwood (Colombo motors) Morbidelli, SCM (with ring gear)
180376 o 180377 o 180378 o
1-13
90
Maka, Reichenbacher Stegherr
180379 o
3-16
90
Maka, Reichenbacher Stegherr
180380 o
1-13 3-16
112 112
Homag, EIMA, Weeke, IMA from 9/94 Homag, EIMA, Weeke, IMA from 9/94
180381 o 180382 o
[mm]
[mm]
Ød
50 57
SK 30 (DIN) SK 30 SK 30 SK 30 SK 40 (DIN) SK 40 (DIN) HSK 63F HSK 63F
[mm]
[mm]
50 50 50 50 50 57
Ident-No.
Spare parts
Dimension
Class-No.
Ident-No.
Cranked Wrench Keys
SW6x100
985730
180383o
[mm]
7–55
Mounting Devices
985700
Cone wiper Product
Machine / Application
Drawing
Design
Advantages
Notes
Ι for cleaning of the inner cones of the cone tool adaptors Ød
Ident-No.
SK 30 SK 40 HSK 25 HSK 32 HSK 63
180907 o 180908 o 180909 o 180910 o 180911 o
[mm]
985202
Mounting Devices Product
Drawing
Machine / Application
Design
Advantages
Ι for quick and simple mounting and adjusting of cutting tools in draw-in collet chucks or on arbors and tool holders
Ι with two-part clamping jaws made from high-quality light alloy Ι mounted on stable pedestal which can be fixed onto workbench Ι quick-grip lever for clamping of clamping chucks or holding arbors
Ι variably applicable for all interfaces by simple exchanging of the clamping jaw
Ø d1min
Ød
SK 30 (DIN) / HSK 50F SK 40 (DIN) SK 30 mit Zahnkranz (Morbidelli, SCM) SK 30 (ISO) CMS / BT 30 HSK 63F / 63E BT 35 HSK 85 (Weinig)
50 63,5 49 46 63 53 85
[mm]
[mm]
Notes
Ident-No.
180362 o 180363 o 180364 o 180365 o 180366 180367 o 182284 o
7–56
Mounting Devices
Spare parts
for Ident-No.
Class-No.
Ident-No.
Clamping Jaws (2-parts) Clamping Jaws (2-parts) Clamping Jaws (2-parts) Clamping Jaws (2-parts) Clamping Jaws (2-parts) Clamping Jaws (2-parts) Clamping Jaws (2-parts) Pedestal (without clamping jaw)
180362 180363 180364 180365 180366 180367 182284
997300 997300 997300 997300 997300 997300 997300 997300
180368o 180369o 180370o 180371o 180372o 180373o 182285o 180374o
985202
Mounting Devices Product
Drawing
Machine / Application
Design
Advantages
Notes
Ι for quick and simple mounting and adjusting of cutting tools in draw-in collet chucks or on arbors and tool holders
Ι mounted on stable pedestal which can be fixed onto workbench
Ι simplest handling offering highest comfort thanks to roll clamping system, no clamping or jamming necessary
Ι for all adapters HSK 63 F
Ø d1min
Ident-No.
HSK 63F
182467
[mm]
985202
Mounting Devices Product
Drawing
Machine / Application
Design
Ι for quick and simple mounting and adjusting of cutting tools in draw-in collet chucks or on arbors and tool holders
Ι high-end version with integraΙ simplest handling offering ted plastic inserts to protect the highest comfort thanks to roll tool holder clamping system, no clamping Ι mounted on stable pedestal or jamming necessary which can be fixed onto workbench
Advantages
Notes
Ι for all adapters HSK 63 F
Ø d1min
Ident-No.
HSK 63F
182166 o
[mm]
7–57
Technical Information
Connection dimensions for Boring Bit Collet Chucks
Threaded shank design for Kombi and Klack systems with appropriate machines
Type
Machine assignment
A
Nottmeyer Lehbrink Pankoke + Kochsiek Prieß + Horstmann
B
Ayen Holzma Knoevenagel Mayer Brandt Reichenbacher Torwegge Zubiola
C
Nottmeyer
D
Böttchner + Gessner Biesse Busellato Dingenotto Hüllhorst Holz-Her Homag Koch
E
Bilek Type KÜN Knoevenagel
F
Alberti Balestrini Bilek (05 R) Busellato Dubus Goma Grotefeld Omeg
G
Scheer
7–58
Morbidelli Reimall Torwegge Weeke Reich
Reimall Schleicher SCM Tanzani Viciani Vitap Weingärtner