2 0 1 7
1 E : G U I D
B U Y E R S
V O L U M E 1# 3
WHAT'S
UNDER YOUR HELMET? CHECK OUT OUR PARTICULATE HOOD LINE UP!
page 7
Nano Flex Halo
Gore® Nomex
Gore® Ultra C6
w w w . f i r e s a f e t y u s a . c o 877.699.3473 m • 8 7 7. 6 9 9 . 3 4 7 3
2
2
NEW PRODUCTS
1” FORESTRY TWIN TIP NOZZLE
• Conforms to Forest Service Secifications (USDA FS 5100) • Available with NST or NPSH Threads • Valve has three positions; Lower Outlet, Upper Outlet, and Off • Outlets are 3/4” NH (Garden Hose Threads) • Standard tips are 3GPM Fog and 3/16” straight Bore Tip Dimensions: 23.5” x 18” x 1.5”, (18” Sign Face, 5.5” Stem) • Flow range 3 or 6 GPM TT300-NH
$250.00
FORTEM™
• Intrinsically Safe Helmet-Mounted Dual-Light™ Flashlight • Flashlight – Floodlight – Dual-Light™ • cULus Certified Intrinsically Safe • Class I Div 1 Grps A-D T4; Class II & III Div 1 Grps E-G • Flashlight – 4 modes: H/M/L /Strobe • Floodlight – 3 modes: H/M/L/Survival • Light cast over user’s shoulder at a 45 angle • Aircraft-grade Aluminum Housing • 2 x CR-123 Batteries (included) • Meets requirements for NFPA-1971-8.6 (2013) • IP-67 Dustproof / Waterproof • Patented Design • Limited Lifetime Warranty • Flashlight mode - Lumens: 250 / 100 / 25 - Run-time: 3.5 / 6.5 / 16 hrs • Floodlight mode - Lumens: 115 / 50 / 10 - Run-time: 3.5 / 6.5 / 16 hrs • Dual-Light mode - Lumens: 150 - Run-time: 3.5 hrs XPP-5466R - Red
$99.90
XPP-5466G - Green
$99.90
2
www.FireSafetyUSA.com
3
PPE
3
Tools
Gloves
4-5
Wrenches & Pocket Tools
56-57
Hoods
6-7
Pike Poles & Axes
58-59
Wildland, Forcible Entry & Brackets
60-61
Helmets & Helmet Accessories
8-13
Boots
14-17
Saws & Extrication
62-63
Gear & Gear Accessories
18-23
Fans, Keiser Machine & Blowers
64-65
Ladders, Folding Tanks & Salvage Covers
66-67
Flashlights Streamlight
26-28
Rescue
Nightstick
29
Ice & Water
68-69
Pelican & UK
30
Carabiners, Rope & Webbing
70-71
Akron & FoxFury
31
Anchor Straps, Pulleys & Helmets
72-73
Harnesses & Stretchers
74-75
Safety Vests, Jackets & Traffic
32-33
Hazmat Leak & Repair Kits and Grain Bin Rescue
34-35
Smoke, CO & Voltage Detectors
36
Gas Detectors
37
Smoke Generators
38
SCBA
39
Hose Fire Hose & Equipment
40-43
Fire Supression Adapters
44-45
Valves & Wyes
46-47
Strainers, Nozzles & Monitors
48-53
Wildland
54
Foam
55
Vehicle Equipment Chocks, Tiles, Cabinets & Kussmaul
76-77
Newton Chutes & Dump Valves
78
Gauges & Repair Kits
79
Lightbars & Warning Lights
80-81
Scene & Generator Lights
82-83
Wash, Accesories & Wax
84-85
Portable Pumps & Skid Units
86-89
Regionally Restricted Products Public Safety Vehicles
90
McCoy Miller Ambulances
91
FSUSA Service
92
E-ONE Fire Apparatus
93
Bullard Thermal Image Cameras
94
Honeywell SCBA & Gear
95
RES-Q-JACK Struts
96
TNT Extrication Tools
97
North Shore Compressors
98-99
CONTACT
MAIN OFFICE 877.699.3473 FAX 507.529.8111 EMAIL contactus@firesafetyusa.com
SHOWROOM & CALL CENTER HOURS MONDAY - FRIDAY 8:00 am - 5:00 pm CST SATURDAY & SUNDAY Closed
PAYMENT INFORMATION
877.699.3473
3
PPE 4|
Structural Gloves
4
FUSION FIRE GLOVES
TITAN KANGROO FIRE GLOVES
• NFPA Compliant • Great dexterity • Gauntlet or Wristlet • Sizes: Small - 3XL
• NFPA Compliant • Kangaroo skin version of our Pro-Tech 8 Titan • Gauntlet or Wristlet • Sizes: S - 3XL
FUSION: GAUNTLET
$64.95
TITAN-K: GAUNTLET
$103.95
FUSION: WRISTLET
$68.95
TITAN-K: WRISTLET
$108.95
TITAN FIRE GLOVES
• NFPA Compliant • Structural & Extrication • Great dexterity • Gauntlet or Wristlet • Sizes: Small - 3XL
SUPER GLOVE
• Kangaroo palm and fingers • Sizes: S - 2XL • NFPA Compliant
TITAN-G: GAUNTLET
$84.95
SUPER GLOVE: GAUNTLET
$122.50
TITAN-W: WRISTLET
$87.95
SUPER GLOVE: WRISTLET
$122.50
KEVLAR GLOVE STRAP
• Kevlar Webbing with swivel scissor clip and fire resistant velcro VGSIII
3D KANGAROO GLOVES
• TRU-3D™ glove • All Kangaroo with Nomex® Kevlar® lining • Sizes: S - 2XL
EVERSOFT COWHIDE GLOVES • Black Eversoft split cowhide • SEF themal lining • PRO-TECT™ glove inserts • Sizes: S - 2XL
INNO795: GAUNTLET
$104.95
INNO715: GAUNTLET
$42.00
INNO790: WRISTLET
$108.95
INNO710: WRISTLET
$47.00
4
$6.00
www.FireSafetyUSA.com
GLOVE KEEPER
• Available in various colors GK
$3.50
5
EXT RESCUE® 4011
• SuperFabric® brand material palm provides ISEA Level 5 cut • Durable TP-X® palm with reinforced stitching • Breathable Airprene™ Velcro® cuff • Hi-Vis color scheme increases visual awareness • Sizes: Small - 2XL 4011
$51.50
Extrication Gloves
EXT RESCUE® 4013
• SuperFabric® brand material palm provides ISEA Level 5 cut • Back-of-hand impact protection system • SlipFit® and anti-debris cuff • Hi-Vis color scheme increases visual awareness • Sizes: Small - 2XL 4013
|5 PPE
EXT RESCUE® 4014
• SuperFabric® brand material palm provides ISEA Level 5 cut • Waterproof H2X™ barrier lining • SlipFit® cuff with Velcro® closure • Hi-Vis color scheme increases visual awareness • Sizes: Small - 2XL
$44.99
4014
$54.50
EXT RESCUEe® 4012
• SuperFabric® brand material palm provides ISEA Level 5 cut • Superior back-of-hand impact protection system • Reinforced index finger and thumb • Hi-Vis color scheme increases visual awareness • Sizes: Small - 2XL 4012
$42.50
B.O.S.S. LITEX®
• Made for advanced extrication and technical rescue • High wear areas reinforced with Kevlar® • Fingertips made out of Level 3 cut resistant Kevlar® • Sizes: S - 3XL PT8-BLO
$29.95
PT 8 X+R
• Polyurethane blood bourne pathogen liner • Kevlar lined • Choose sizes Small - 3XL • Choose red or yellow PT-8X+R
877.699.3473
$49.95
5
PPE 6|
6
Hoods
PBI & P84 FIRE HOODS
• Hoods available in standard length or long
NOMEX FIRE HOODS
• NFPA Approved nomex hoods provides comfort and breathability
PACIA-PBI
$27.50
PACII-PBI ULTIMATE LONG HOOD
$30.00
PACIA-NOMEX LENZING
$18.95
PACIA-P84
$25.00
PACII-ULTIMATE NOMEX LONG HOOD
$22.95
PACII-P84 ULTIMATE LONG HOOD
$27.50
CARBON HI-VIS FIRE HOODS
• Ultra C6 Carbon (black) double ply material throughout, 21” total length • Sewn with Hi-Vis yellow nomex thread • NFPA Approved
CARBON FIRE HOODS
• Lightweight hood that provides excellent fire protection • Strong and durable • NFPA Approved
PACII-VSY-C6: Hi-Vis Yellow Thread
$44.50
PACIA-ULTRA CARBON
$32.50
PACII-VSO-C6: Hi-Vis Orange Thread
$44.50
PACII-ULTRA CARBON LONG HOOD
$37.50
PACII-VSP-C6: Hi-Vis Pink Thread
$44.50
PACII-2SVZ-ULTRA: Long Hood with Heat Release Vent
$45.00
PINK NOMEX HOOD
• 21” Long Hood with notched shoulders PACII-PINK
6
FIRE INK SUPPORT NOMEX HOOD
USA FLAG P84 HOOD
• 21” Long Hood with notched shoulders
• 21” Long Hood with notched shoulders $42.95
PACII-USAFLAG
$42.95
www.FireSafetyUSA.com
PACII-FIREINK
$42.95
7
Particulate Hoods
|7 PPE
DUPONT™ NOMEX NANO FLEX HOOD
• Highly breathable • 3-Ply protection • Thin & light • FR material with superior particular barrier performance • NFPA certified PS383867
HALO PARTICLE FILTER HOOD
• Blocks 96.6% of particles • 3-Ply protection • Moisture wicking • UL & NFPA 1971 HALO HOOD
$95.00
GORE® PARTICULATE ULTRA C6 HOOD
GORE® PARTICULATE NOMEX BLEND HOOD
• Blocks 96.6% of particles • 3-Ply protection • Moisture wicking • UL & NFPA 1971-2013
• Blocks 99.9% of particles • 3-Ply protection • Inherently flame resistant • UL & NFPA 1971-2013 GORE NOMEX
$107.50
C6 GORE
$84.95
$94.95
LIFE GUARD HOOD
• Particulate Resistant Hood • Blocks carcinogenic particulates in both air and water • Engineered to protect your neck and throat • NFPA Approved HD-213N-PR-BLACK
$115.00
HD-213N-PR-TAN
$115.00
LIFE GUARD HOOD SIZING FOUR SIZE OPTIONS HOOD SIZE Small Medium Large X-Large
HEAD CIRCUMFERENCE
DRESS CAP SIZE
20” - 21 3/4”
6 1/2”, 6 5/8”, 6 3/4”
21 7/8” - 22 7/8”
6 7/8”, 7”, 7 1/8”
23” - 24”
7 1/4”, 7 3/8”, 7 1/2”
24 1/8” - 25 1/4”
7 5/8”, 7 3/4”, 7 7/8”, 8”
877.699.3473
7
PPE 8|
8
Helmets
PX & FX MODERN HELMET
• PX Models have a Thermoplastic Shell • FX Models have a Fiberglass Shell • Colors: Yellow, Black, Red, White, or Blue PX: with 4” Faceshield
$210.00
FX: with 4” Faceshield
$210.00
PX & FX TRACKLITE HELMET
• Featuring eight bright white LEDs protected behind a heat-resistant glass • Easily operable with a gloved hand • TrakLite can be used with or without a leather front • All leather fronts are purchased separately • Colors: Yellow, Black, Red, White, or Blue
UST TRADITIONAL HELMET
PXTL: with 4” Faceshield
$335.00
PXTL-G: with Goggles
$335.00
• 4” Faceshield, Nomex neck liner and chinstrap • Colors: Yellow, Black, Red, White, Blue, Orange, Pink and Green • Glossy finish • Leather front not included UST: with 4” Faceshield
$240.00
USTG: with Goggles
$240.00
USTB: with Bourke Shields
$260.00
USTM TRADITIONAL HELMET USTMTL TRACKLITE HELMET
• Eight bright white LEDs protected behind a heat-resistant glass • Easily operable with a gloved hand • TrakLite can be used with or without a leather front • All leather fronts are purchased separately • Colors: Yellow, Black, Red, White, or Blue
• 4” Faceshield, Nomex Neck Liner and chinstrap • Colors: Yellow, Black, Red or White • Matte finish • Leather front not included USTM: with 4” Faceshield
$220.00
USTMG: with Goggles
$220.00
USTMTL: with 4” Faceshield
$325.00
USTMB: with Bourke Shields
$235.00
USTMTL-BRK: with Bourke Shields
$325.00
USTMGB: with Goggles & Bourkes
$270.00
8
www.FireSafetyUSA.com
9
Helmets
|9 PPE
RETRAK ™ HELMET SERIES
• The ReTrak series offers emergency responders a helmet with an integrated visor engineered based directly on feedback from firefighters • Simple one-handed operation • Easily accommodates eyewear • Increased area of protection • Comfort nosepiece • Quick removal for cleaning • Made in the USA • Meets NFPA 1971/ ANSI/ISEA Z87.1+ requirements USTM6R350: Traditional Helmet
$235.00
USTM6R350TL: Traditional Helmet w/ TrakLite
$320.00
PXSR350: Modern Helmet
$235.00
PXSR350TL: Modern Helmet w/ TrakLite
$320.00
WILDLAND HELMET
• Cap Style or Full Brim Wildland Helmets • Both styles include adjustable chin strap • Colors: yellow, white, red, blue, orange, or black FH911CR: Cap-Style Helmet
$45.00
FH911HR: Full-Brim Helmet
$48.00
R222: Optional Ear/Neck Protector
$35.00
LTX & LTXTL HELMET
• LTX standard fire helmet • LTXTL featuring eight bright white LEDs • Nomex chinstrap with quick-release buckle and postman’s slides • Comes standard with 4” faceshield LTX
$170.00
LTXTL
$260.00
877.699.3473
9
PPE 10|
10
Helmets
EV1 HELMET
• Internal EZ Touch Eye Protection • Composite Fiberglass Shell • Features Leather Headband and Ratchet Cover • Black Nomex Ear/Neck Protector • Weighs under 50 oz. • Colors: Black, Yellow, Red, White EV1-HT-MOD
$305.00
EV1-HT-TRA
$330.00
1010 TRADITIONAL HELMET
• Standard: Nomex earflap and screen printed eagle • Deluxe: PBI/Kevlar earflap and carved eagle • Available in Yellow, Black, Red, White, or Blue • Leather front not included
1010 TRADITIONAL DEFENDER HELMET
1010: Standard with 4” Faceshield
$295.00
1010B: Standard with Bourke Shield
$295.00
• Fast, easy raising/lowering of your goggle with gloves • Retractable for the ultimate in compact convenience • Quick-disconnect for fast lens change-out • Deluxe Configuration includes Deluxe Leather Liner, PBI/ Kevlar Earlaps, 3-D Carved Brass Eagle, 6” Front Holder and Tuffshield (slightly tinted) Defender Goggle • Colors: Black, Blue, Green, Orange, Red, White and Yellow
1010G: Standard with Goggles
$300.00
1010D: Deluxe with 4” Faceshield
$335.00
1010DB: Deluxe with Bourke Shield
$335.00
1010-DEF-STD: Standard with Defender Visor
$310.00
1010DG: Deluxe with Goggles
$340.00
1010-DEF-D: Deluxe with Defender Visor
$350.00
1044 TRADITIONAL HELMET
• Standard comes with Nomex Earlaps and Silk Screen Eagle • Deluxe comes with PBI/Kevlar earflaps and carved eagle • Colors: Black, Red, White or Yellow 1044: Standard with 4” Faceshield
$245.00
1044-B: Standard with Bourke Shield
$245.00
1044-G: Standard with IZ2 Goggles
$255.00
1044-D-STD: Deluxe with 4” Faceshield
$285.00
1044 TRADITIONAL DEFENDER HELMET
• Fast, easy raising and lowering of shield even with gloves • Retractable for the ultimate in compact convenience • Standard Configuration: Nomex earflap and silk screen eagle • Deluxe Configuration: PBI/Kevlar earflaps and carved eagle • Colors: Black, Red, White and Yellow
1044-D-B: Deluxe with Bourke Shield
$285.00
1044-Defender: Standard with Defender Visor
$260.00
1044-D-G: Deluxe with IZ2 Goggles
$295.00
1044-Defender-Deluxe: Deluxe with Defender Visor
$300.00
10
www.FireSafetyUSA.com
11
|11 PPE
660 MODERN DEFENDER HELMET
660 METRO MODERN HELMET
• Features a durable DuraGlas Fiberglass Shell • Defender visor flips up inside helmet • Available in Yellow, Black, Red, White, or Blue
• Features a durable DuraGlas Fiberglass Shell • Standard helmet includes 4” faceshield • Available in Yellow, Black, Red, White, or Blue 660: with 4” Faceshield
Helmets
$240.00
664 MODERN INVADER HELMET
• Features a durable DuraGlas Fiberglass Shell • Standard helmet includes 4” faceshield • Colors: Yellow, Black, Red, White
660: Defender
$260.00
664 MODERN DEFENDER HELMET
664: with 4” Faceshield
$205.00
664-G: with Goggles
$215.00
• Features a durable DuraGlas Fiberglass Shell • New Defender visor flips up inside helmet • Colors: Yellow, Black, Red, White 664: Defender
877.699.3473
$215.00
11
PPE 12|
Helmet Accessories
12
BULLARD HELMET HARDWARE R330: 4” Faceshield
$62.50
R325: 6” Faceshield
$62.50
R151: Faceshield Hardware Kit, PX/FX
$15.00
R152: Faceshield Hardware Kit, UST
$15.00
R309: Bourke Shield Kit
$70.00
CAIRNS HELMET HARDWARE S905P: 4” Faceshield for 1010, 880, 660, 664, New Yorker & more
$60.00
S910P: dFaceshield Hardware Kit
$30.00
S918P: Faceshield Hardware Kit
$30.00
S10KP: Bourke Shield with Hardware
$70.00
LEATHER FRONTS IZ3 GOGGLES
• NFPA Structural Firefighting Goggles IZ3
$47.50
IZ2 GOGGLES
• NFPA Structural Firefighting Goggles IZ2: Goggles
$50.00
740-0251: Replacement Mounting Brackets
$10.80
• 6” Shields fit traditional helmets • Flag shields have the same inset and lettering options as our standard fronts STANDARD SHIELD-6-CLOVER
$45.00
STANDARD-6: 6” for Traditional Helmets
$45.00
GLOW-SHIELD: 6” Glow in the Dark Panels
$50.00
4C: 4” Fronts for Modern Helmets
$45.00
TRACKLITE-5: 5” Front for Bullard Tracklite
$45.00
Medallion
$20.00
Gold-Front-6: Imitation Gold Leaf Front
$50.00
KEY CHAIN FRONTS
• Fully customizable keychains
WILDLAND GOGGLES
KC-6
• Designed for wildland firefighting 740-0236
$20.00
$35.00
TEAR-OFF INSERT 6 PACK
• Can be quickly removed to instantly restore vision ET-6PK
$7.00
NOMEX GOGGLE HEAT SLEEVE • Helps protect the goggles from the elements when not being worn ESSARSLV-N
12
$17.50
PERSONALIZED ACCOUNTABILITY ID TAGS • Durable plastic and aluminum ID tags • Heavy duty trigger snap attaches to gear or helmet • Various colors available IDPL001: Single Sided Tag, Plastic
$8.95
IDPL001-DS: Double Sided Tag, Plastic
$14.95
IDAL500: Single Sided Tag, Aluminum
$10.95
www.FireSafetyUSA.com
13
Helmet Accessories
13 | PPE
HELMET DECALS CR: Helmet Crescents
$3.50
FRT: Helmet Front Decals
$4.00
FUSMC: American Flag 3.5” Maltese
$4.00
FUS-3: 3” American Flag
$2.50
FUSWR-3: Proud American Firefighter
$3.00
SOLB-3: Star of Life, 3”
$4.50
SOLB-6: Star of Life, 6”
$9.50
SOLB-10: Star of Life, 10”
HELMET ROCKERS • Any rank, set of 2 IDH-02
$8.99
$25.00
N-3: 3” Numbers
$2.00
TZ-Y: Yellow Trapezoids, 5 Decals
$5.00
TZ-R: Red Trapezoids, 5 Decals
$5.00
TZ-B: Blue Trapezoids, 5 Decals
$5.00
HFT: American Flag, 8 Decals
$8.00
AMERICAN BADASS • Thin red line • 4” IDG-36R
$12.99
CHEVRON TET’S • Set of 8
IDH-04: SILVER
$18.99
IDH-04: RED
$23.99
IDH-04: BLUE
$23.99
IDH-04: BLACK
$23.99
GLOW HELMET BAND
• Increased safety in dark and smoky conditions • Charged by any light source • Illuminates up to 6 hours FF-FA-HEADBAND2
$25.00
AMERICAN FLAG • Crown of helmet IDH-05: SILVER
$18.99
IDH-05: RED
$23.99
IDH-05: BLUE
$23.99
IDH-04: BLACK
$23.99
IDH-05: BLUE & RED
$25.99
BRIM NAMEPLATE • Rear brim of helmet IDH-01
877.699.3473
$13.99
13
PPE 14|
Leather Structural Boots 14
X2 14” BOOT
KNOCKDOWN 14” BOOT
• One size fits all - removable insoles accommodate medium, wide, and extra wide widths in one boot size • Sizes: 7 – 12, 13, 14, 15
• Blood-Borne Pathogen Compliant • Sizes 5 – 13, 14, 15, medium, wide, or extra wide 804-6389
$355.00
X2-0912
$305.00
14” BLACK LEATHER BOOT
• Integral Pull On Loops • Full Grain Leather • 3M Silver Trim • 3D Vulcanized Rubber Toe • Sizes 5 – 15, medium, wide or extra wide FDXL100
14
14” GREY LEATHER BOOT
• Waterproof HBR inner liner • Steel toe and shank • Sizes 4 – 14, 15, 16, regular, wide, or extra wide $285.00
FDXL-50
www.FireSafetyUSA.com
$250.00
15Leather Structural Boots 15 | PPE
HELLFIRE OBLIQUE LEATHER BOOT
POWER HV LEATHER BOOT
• Fire and Ice Slip Resistant Sole • Sizes 5 – 14, 15, medium, wide, or extra wide
• Fire and Ice Slip Resistant Sole • Sizes 5 – 14, 15, medium, wide, or extra wide 804-6369
$269.00
804-6373
$318.00
PRO WARRINGTON LEATHER BOOT • Athletic fit • Remarkable comfort and agility • Improved boot visibility below the pant line • All crosstech liner • Sizes 5 – 16, medium, wide, or extra wide
PRO WARRINGTON BOOT
• Steel bottom plate and ladder shank • Sizes 5 – 13, 14, 15, medium, wide, or extra wide 5006
$410.00
BT-5555
877.699.3473
$374.95
15
PPE 16|
Rubber Structural Boots 16
HELLFIRE KEVLAR LINED BOOT
• Kevlar Inner Liner, oversized steel toe • Sizes 5 – 14, 15, medium, wide, or extra wide 807-6000
$175.00
JAVA NOMEX LINED RUBBER BOOT
• Nomex lined • 14” high • Steel toe cap • Steel midsole • Anti-slip • Waterproof • Sizes 5 – 14, 15, medium, wide, or extra wide E790090
HELLFIRE FELT LINED BOOT
• Felt Inner Liner, oversized steel toe • Sizes 5 – 14, 15, medium, wide, or extra wide 807-6003
$135.00
JAVA FELT LINED RUBBER BOOT
• Felt lined • 14” high • Steel toe cap • Steel midsole • Anti-slip • Waterproof • Sizes 5 – 14, 15, medium, wide, or extra wide E780090
• Comfort Fit Plus - with Enersole • 16” boot height • Sizes 5 – 14, 15, medium, wide, or extra wide $150.00
• 13″ rubber pull-on • Structural and Liquid Splash Boot • Weight (approx) – 6.3 lbs • Made in North America• • Sizes 5 – 16, narrow, medium or wide 1000
16
$112.50
RANGER SERIES 1000 RUBBER BOOT
RUBBER BOOT
9451
$127.50
www.FireSafetyUSA.com
$217.50
17 Wildland & Duty Boots 17 | PPE HELLFIRE 9” WILDLAND BOOT
HELLFIRE 9” FIRESTALKER WILDLAND BOOT
• 9” waterproof cut-resistant leather • Sizes 5 – 14, 15, medium, wide, or extra-wide 834-6381
• Vibram Fire & Ice ATS All-Terrain Sole • Sizes 7 – 13, 14, 15, medium, wide, or extra-wide
$269.00
834-6383
8” GEN-FLEX2 SIDE ZIP BOOT
HELLFIRE 9” EMS & WILDLAND BOOT
• Smooth high-shine polishable leather toe • Sizes 7 - 12, 13, 14, 15, medium or wide width
• Steel Toe, 9” • Sizes 5 – 14, 15, medium, wide, or extra-wide 804-6379
$229.00
834-6888
$125.00
8” TROOPER SIDE ZIP BOOT
HELLFIRE 10” WILDLAND FIRE DEVIL LACE-TO-TOE
• Waterproof leather • Impact 300 gel heel insert • Sizes 7 – 12, 13, 14, 15, medium or wide width
• Removable Kiltie • Sizes 5 – 14, 15, medium, wide, or extra-wide 834-6371
$259.00
$289.00
834-7991
877.699.3473
$135.00
17
PPE 18|
18
Structural Gear
NOMEX STRUCTURAL GEAR
• NFPA Compliant Fire Gear • Outer Shell - Nomex • Thermal Liner - Defender 750 • Moisture Barrier - RT 7100 • Microphone Loop in Webbing • Wristlet (wrist only) Nomex - impermeable waterwell • 3” NFPA -orange Scotchlite trim • Soft Drag Rescue Device • Snap-in Liner for easy cleaning • Extremely Lightweight • Reinforced on knees with DuPont™ Kevlar® • Removable knee pad cushions • Low profile suspender attachments points • Elastic intake at waist • Reinforced cuffs and crotch area • Reinforced cargo pockets • Inspection port for easy repair • Removable suspenders - 8 Point Button PS1122: Jacket
$675.00
PS1162: Pant
$475.00
PREMIER TITAN NOMEX/KEVLAR STRUCTURAL GEAR
• NFPA Compliant Fire Gear • Coat Outer Shell - Hainsworth TITAN • Coat Thermal Liner - Iso’Air • Coat Moisture Barrier - RT 7100 • Full cargo/handwarmer pockets, convertible radio pocket, slash pocket of CROSSTECH® for easy access to medical glove storage • Reinforced elbows with a double layer of outer fabric • Water well system of CROSSTECH® in wrist and tube knitting wristlets of DuPont™ Nomex® • Torso thermal liner extended on top of neck collar for better protection against liquid penetration • MIC loops ID-Card hanger/pass alarm • Flashlight holder • Full bellows reinforced cargo pockets • Zipper velcro front closure • Elastic intake at waist and webbing take up straps made by DuPont™ Nomex® • Adjustable suspender and low profile suspender attachment points • Reinforcements in the crotch area • Pre-bent reinforced knees made with DuPont™ Kevlar® • Double layer of outer fabric on cuff PS1126: Jacket PS1160: Pant
18
$1,000.00 $700.00
www.FireSafetyUSA.com
19 Structural Gear Package
NFPA STRUCTURAL
|19 PPE
GEAR PACKAGE $1,495.00
NFPA STRUCTURAL GEAR PACKAGE
Viking Nomex Turnout Gear • Yellow only Gear Package Includes: • Bullard LTX Fire Helmet with 4” Faceshield • Nomex Fire Hood • Nomex Coat • Nomex Pant • Suspenders • Cosmas Java Felt Lined Boot • Innotex Eversoft Cowhide Gloves • Gear Bag
Viking Gear Sizing S
M
L
XL
2XL
3XL
Chest
34-38
38-42
42-46
46-50
50-54
54-58
Sleeve
30.5
31.5
32.5
33.5
33.5
33.5
Waist
23-33
33-37
37-41
41-45
45-49
49-53
Inseam
29
29
29
31
31
31
877.699.3473
19
PPE 20|
Wildland Gear Package 20
WILDLAND GEAR PACKAGE
PGI WILDLAND COVERALLS
COMPLETE WILDLANDGEAR PACKAGE
• FR Cotton or 6 oz Nomex Package Includes: • Front zipper extended closure • Bullard Cap Style Helmet • PGI Standard Coat and Pant, Yellow • Two large expandable cargo hip pockets • ProTech8 Wildland Gloves • Radio pocket on left chest • Microphone holder loop • Cosmas Java Felt Lined Boot • 2” Scotchlite™ triple trim in lime/silver WL-GEAR-PACKAGE $435.00 • Self-material waistband with elastic back • Two large cargo pockets on front • Two full bellow pockets on legs • Two rear patch style pockets • Colors: Yellow, Red, Tan, Navy, Royal Blue • Available in Short (5’4” - 5’7”), Regular (5’8” - 6”), or Tall (6’1” - 6’ 4”) • Deluxe version includes: Pass-through pockets with zippers, 14” leg zippers, cell phone pocket on right chest, reflective around legs at mid-calf • 3” silver reflective lettering, Cost per letter: $5.00
20
STANDARD COVERALL COTTON
NOMEX
$205.00
S-XL
$240.00
$225.00
2XL
$260.00
$245.00
3XL
$280.00
DELUXE COVERALL COTTON
SIZE
Chest
Sleeve
SMALL
34” - 36”
31.5”
MED
38” - 40”
32.5”
LARGE
42” - 44”
33.5”
NOMEX
XL
46” - 48”
34.5”
$260.00
S-XL
$295.00
2XL
50” - 52”
35.5”
$285.00
2X
$320.00
3XL
54” - 56”
36.5”
$310.00
3XL
$355.00
PGI WILDLAND TWO PIECE GEAR
• FR Cotton or 6 oz Nomex, • Coat: Front zipper extended closure • Coat: Two large expandable cargo hip pockets • Coat: Radio pocket on left chest with hook and loop flap closure • Coat: Microphone holder loop is set above the pocket flap • Pant: Zipper fly closure • Pant: Front pockets are extra deep • Pant: Two large cargo pockets at mid-thingh with velcro flap • Pant: Two rear patch pockets • Deluxe Coat adds cell phone pocket on right chest and triple trim • Deluxe Pant adds 14” leg zippers and 3” triple trim around mid-calf • Cotton Colors: Yellow, Royal Blue, Tan, or Dark Navy • Nomex Colors: Yellow, Navy, or Tan • 3” silver reflective lettering, Cost per letter: $5.00 CHEST
STANDARD COAT COTTON
NOMEX
$130.00
S-XL
$155.00
$140.00
2XL
$170.00
$155.00
3XL
$185.00
DELUXE COAT COTTON
NOMEX
$160.00
S-XL
$190.00
$175.00
2XL
$210.00
$195.00
3XL
$230.00
STANDARD PANT COTTON
NOMEX
$125.00
S-XL
$155.00
SLEEVE
$135.00
2XL
$170.00
$155.00
3XL
$185.00
SIZE
WAIST
SMALL
27” - 30”
34” - 36”
31.5”
MED
31” - 34”
38” - 40”
32.5”
LARGE
35” - 38”
42” - 44”
33.5”
COTTON
DELUXE PANT NOMEX
XL
39” - 42”
46” - 48”
34.5”
$160.00
S-XL
$185.00
2XL
43” - 46”
50” - 52”
35.5”
$175.00
2XL
$205.00
3XL
47” - 50”
54” - 56”
36.5”
$195.00
3XL
$220.00
www.FireSafetyUSA.com
Wildland & Extrication Extrication Gear Gear 21 Wildland & DRAGON SLAYER BRUSH SHIRTS
• Zippered chest pocket with internal headphone port. • Second large chest pocket with hook and loop closures. • Mic-tab on right chest for added convenience. • Tailored fit for maximum mobility and comfort. • Hook and loop cuff closures to keep the grit out. • Extra-long, square-cut tails won’t pull out. • Innovative stand-up collar provides extra protection. • Placket front closure with melamine button fasteners. • Covered by True North’s BOMB-PROOF guarantee. • Certified to current NFPA 1977 Standards. • Choose from Tecasafe Plus or Nomex material • Sizes: Small-3XL
DRAGON SLAYER BRUSH PANTS
| PPE PPE |21
WILDLAND GLOVE
• Reinforced palm and thumb • Remains soft and flexible after drying • Modacrylic inner liner for extra protection • Available in regular or with debris blocker • Sizes: S - 3XL PT-8 W
$32.95
PT-8 WDB
$32.95
• Tru-Fit™ micro-adjustable elastic waist band for a custom fit • Diamond-gusseted crotch panel for greater range of motion and reduced chaffing. • Wear-Guard™ patches on inside of cuffs for maximum durability • Engineered cargo pockets prevent snagging • Fully adjustable ankle straps keep the dirt out • Super-Fly™ self-locking, full-metal zipper • Wrangler style front pockets with reinforced patch for clip-knives • Seven oversized belt loops for 2” web belts. • Two well-sized rear pockets • Covered by True North’s™ BOMB-PROOF guarantee • Certified to NFPA 1977 Standards • Choose from Tecasafe Plus or Nomex material • Specify waist size Small-2XL and inseam size 28” - 36” in even sizes
BRUSH SHIRTS DWSYT: Tecasafe Plus, Sizes Small-XL
$89.50
DWSYT00: Tecasafe Plus, Sizes 2XL-3XL
$94.50
DWSYN: Nomex, Sizes Small-XL
$134.50
DWSYN00: Nomex, Sizes 2XL-3XL
$139.50
BRUSH PANTS DWPST: Tecasafe Plus, Sizes Small-XL
$137.50
DWPST5: Tecasafe Plus, Size 2XL
$154.50
DWPSN: Nomex, Sizes Small-XL
$187.50
DWPSN5: Nomex, Size 2XL
$204.50
EXTRICATION JUMPSUIT
• 9.0 oz. FR cotton extrication suit • Stand up collar with Velcro® closure • Bi-swing back • Mic clip above radio pocket • Pencil pocket on left sleeve • Radio pocket with flap and utility strap • Padded elbows, forearms, knees and shins • Velcro® adjustable straps at wrist • Velcro® take up straps at waist • Side entry pockets with pass through Velcro® closure • Two rear patch pockets with flaps • Semi-bellows pocket with flap on each thigh • 12” leg zipper with Velcro® • Scissor pocket with strap • Glove strap with clip in waistband • Reflective trim • Large pocket on right chest with utility loop • Brass zipper front with Velcro® storm flap • Colors: Red, Navy Blue, Royal Blue and Tan
SIZE
CHEST
SLEEVE
WAIST
SMALL
34” - 36”
32 3/4”
27” - 30”
MEDIUM
38” - 40”
33 5/8”
30” - 34”
LARGE
42” - 44”
34”
34” - 38”
XL
46” - 48”
34 5/8”
38” - 42”
2XL
50” - 52”
35 1/4”
42” - 46”
FYREPEL-EXT-JUMPSUIT: XS - 2XL
$195.00
3XL
54” - 56”
35 7/8”
48” - 52”
FYREPEL-EXT-JUMPSUIT: 3XL - 6XL
$250.00
877.699.3473
21
PPE 22|
Gear Accessories
22
LEATHER ILLUMINATING TRUCKMANS BELT
• The Illuminating Foxfire/Box Alarm Leather Combopack includes a radio strap, anti-swap strap and a universal radio case • Radio strap sizes: Small (52”-60’), Regular (56”-64”), XL (60”-68”), 2XL (64”-72”) FF-BA-RCOMBO
$134.95
FIREMIC GEAR KEEPER
• Offers full 20” quick and easy access to your mic • This unique device mounts to your mic tab or radio pocket with a pin screw RT2-4022
$21.95
LEATHER FIREFIGHTER REFLECTIVE RADIO STRAP • Leather mic loop • Positive locking buckle • Mates to a radio holder
PADDED REFLECTIVE SUSPENDERS
5425: Anti-Sway Strap
• H-Back design with alligator clips • 8 point attachment • Foam padded and reflective
6543R: Radio Strap
13350: 36”
$17.50
13351: 42”
$17.50
13352: 48”
$17.50
$9.95 $32.50
UNIVERSAL RADIO HOLDER
• Uses D-rings to mate with radio strap • Adjusts for most small and mid-size radios 5487RC
$32.50
LEATHER PAGER HOLDER
• Designed to hold the Minitor V pager from Motorola • Snap closure allows for easy access
WILDLAND SUSPENDERS
• H-Back design with alligator clips S94
22
$30.00
www.FireSafetyUSA.com
5581-LOOP
$12.95
5881-CLIP
$15.95
23
• 32” X 17” X 16” total dimensions • 8,704 cubic inches • Left side pocket 16” x 17” x 8” • Right side pocket will hold a SCBA mask and extra items
• 30” X 14” X 15” total dimensions • Top load with helmet compartment • Mesh air vents provide full ventilation • Choose black or lime $50.00
DELUXE 3XL GEAR BAG - LUGGAGE STYLE
911IM: Oversized Gear Bag
$50.00
913IM: Shoulder Strap
$10.00
PINK XL GEAR BAG
• 18” x 32” x 18” total dimensions • Retractable luggage-style handle • Largest bag on the market • Choose black or red LXFB60WD
23 | PPE
OVERSIZED GEAR BAG
QUAD VENT GEAR BAG
LXFB45M
Gear Bags
• 16” x 21” x 15” total dimensions • 7280 cubic inches • Grab-n-Go pull strap and strap grabber $125.00
LXFB40V-PINK
$40.00
XL GEAR BAG
PREMIUM 3XL GEAR BAG
• 30” x 15” x 13” total dimensions • Grab-n-Go pull strap and strap grabber
• 16” x 34” x 18” total dimensions • Holds up to 2 sets of turnout gear • Grab-n-Go pull strap and strap grabber
GB5005P: Polyester
$35.00 $70.00 $90.00
LXFB10
$60.00
GB5005N: Nylon
LXFB10WV: with Wheels
$70.00
GB5005W: Nylon with Wheels
877.699.3473
23
PPE 24|
Washing Equipment
24
WASHER EXTRACTOR
• UniMac equipment meets the cleaning requirements of NFPA 1851 standards • Faster extraction technology spins up to a maximum of 100 G-Force • Advanced Inverter Drive • M9 Control – Six cycles that can be modified to meet your laundry’s unique demands. Three water levels and up to five supply signals for automated dispensing of laundry chemicals • Load Capacity - 30 lbs or 40 lbs • Width/Depth/Height : 29” x 34 9/16” x 45” • Voltage/Hz # of Wires/Phase/Circuit Breaker - FLA: 380-415/50/60/3/3 15-4 • Net Weight: 460 lbs UCN030HNFX: 30lb Washer Extractor
$6,995.00
UCN040HNFX: 40lb Washer Extractor
$9,250.00
STEELBASE-8: 8” Steel Base
$450.00
WASHER EXTRACTOR
• Can wash 1-2 sets of turnout gear per load. Full wash cycle: 25-35 minutes • Runs on 120 volts (watts per load: 110-160 watt hours) • Stainless steel inner and outer tubs (capacity: 2 cu. Ft) and has a patented tub design • Easy soft-mount installation • No transmission or agitator to replace and no lower water seals • With fewer overall moving parts; Promotes longer life expectancy • Complete with manual /manufacturer’s warranty & Follows NFPA-1851 guidelines PPE-EW
$3,750.00
TURNOUT GEAR PPE WASH
• This wash solution has been carefully developed to ensure the safe cleaning of all firefighting turnout gear and other PPE. Meets the recommendations set forth by NFPA 1851, 2008 edition • Non-corrosive to metals and will not leave a residue • Highly Concentrated formula with a pH below 9.5 • Can be used in all cleaning applications GW101: One Gallon
24
$28.50
GW401: [4] One Gallon
$111.50
GW105: 5 Gallon Pail
$126.50
FIREWIPES
• Created for on-scene decon • Helps minimize contact times between the skin and fireground contaminants • 3-year shelf life • Individually packaged to eliminate cross-contamination • Textured on one side and smooth on the other • Sold per pack, 12 wipes per pack FIREWIPES
www.FireSafetyUSA.com
$13.99
25
Storage Racks
25 | PPE
RED RACK GEAR STORAGE
• Dimensions: 20” wide x 20” deep x 72” tall x length specified • Red Rack components are coated with durable red powder coat finish • Adjustable boot & helmet shelves, apparel hooks and label holder RRWM-2/20: 2 Compartment System
$550.00
RRWM-3/20: 3 Compartment System
$750.00
RRWM-4/20: 4 Compartment System
$1,000.00
RRWM-5/20: 5 Compartment System
$1,200.00
RRWM-6/20: 6 Compartment System
$1,400.00
RRWM-7/20: 7 Compartment System
$1,600.00
RRWM-8/20: 8 Compartment System
$1,850.00
RRWM-9/20: 9 Compartment System
$2,050.00
RRWM-10/20: 10 Compartment System
$2,300.00
RRWM-11/20: 11 Compartment System
$2,500.00
RRWM-12/20: 12 Compartment System
$2,700.00
RRWM-13/20: 13 Compartment System
$2,900.00
RRWM-14/20: 14 Compartment System
$3,150.00
RRWM-15/20: 15 Compartment System
$3,400.00
SINGLE AND DOUBLE SIDED MOBILE RED RACK GEAR STORAGE
• Dimensions: Single Sided 64” wide x 20” deep x 79” tall, Double Sided 64” wide x 40” deep x 79” tall • Single sided with three openings, double sided with three openings each side • Units are supplied with four swivel casters • Includes two foot operated brakes • Adjustable boot and helmet shelves, apparel hooks and label holder RMSS-3/20: Single Sided Mobile Rack
$950.00
RMSS-3/24: Single Sided Mobile Rack
$975.00
RMDS-6/20: Double Sided Mobile Rack
$1475.00
RMDS-6/24: Double Sided Mobile Rack
$1550.00
DRY KWIK ACCESSORIES DKH-O: Open loop coat hanger
$9.95
DKH-C: Closed loop coat hanger
$9.95
FDH: Flat coat and pant hanger
$9.95
GDH: Glove or hood hanger
$9.95
HH: Helmet Holder
$9.95
BPH: Utility Hooks
$3.00
SUPER HANGER
• Supports up to 20 lbs • One piece I-Beam construction • Sturdy non-corroding hanger • Size: 1.2” x 16.6” x 9” • Available in black or yellow SUPER HANGER
$5.95
GLOVE & BOOT DRYER
• Heat or no heat • 3 hour timer • One push button disassembly • Dry time: 1-2 hours S16DG1
877.699.3473
$65.00
25
26 | FLASHLIGHTS
26 Streamlight
PORTABLE SCENE LIGHT
• Rapidly deployed and easily stowed • Three user-selectable outputs: Selectable diffuser settings for two beam widths • High for a super-bright flood beam; 3,600 lumens, runs 5 hours • Medium for an intense beam and longer run time; 5,300 lumens, runs 9 hours • Low for when a less intense beam is ideal and for longer run times; 1,100 lumens, runs 18 hours • Indefinite run time when using 12V DC power cord • 25 lbs provides weight stabilization • Available in Safety Yellow with AC and DC charge cords and shoulder strap 45670
$625.00
KNUCKLEHEAD LED FLASHLIGHT
• Work Light has a 360 degree rotating head and is equipped with a removable heavy-duty magnet and folding hook so you can put light just where you need it. Dual C4 LEDs provide 200 lumens of light in high. Choose alkaline or rechargeable. Includes alkaline battery tray, so it can be powered by 4 AA batteries 90642: Alkaline Light Only
$112.50
90627: Light with AC/DC Chargers
$150.00
• C4® LED 270 Lumens • Run time up to 3 hours • Tailcap push button • 5.22” Long; Lightweight, just 4.1 oz. • Includes two 3V CR123A lithium batteries • Includes helmet mount and rubber helmet strap 88854: PolyTac Kit
• The NEW LED Survivor with low-profile bezel • Ultra-bright C4 LED technology wth 175 lumens. • Mode of low beam, high beam, and strobe/flashing • Custom designed optic with optional, interchangeable Smoke Cutter® plugs for preferred beam pattern. • Choose light only, or light with steady charger and both 120V AC and 12V DC cords • Optional Alkaline battery cartridge for use with 4 “AA” alkaline batteries 90540: Orange Alkaline Light Only
$57.50
90541: Yellow Alkaline Light Only
$57.50
90500: Orange Rechargeable Light Only
$87.50 $127.50
90513: Yellow Light with Chargers
$127.50
90338: Replacement Battery 90400: 5-Bank Charger with 120V Wall Plug
26
$35.00 $285.00
22050: 12V DC Charge Cord
$10.00
22311: 120V AC Charge Cord
$15.00
• C4 LED Illumination Output • 2 modes: High – 550 Lumens, 10 hours runtime Low – 82 Lumens, 4 hours runtime • Pistol-grip spotlight features 3 modes: High, low, strobe • Unlimited runtime using 12V DC power cord • Powered by 4 “C” batteries (not included) or 12V DC power cord (included) 44910: Waypoint Rechargeable
$87.50
90503: Orange Light with Chargers
WAYPOINT LED
44900: Waypoint Light
$60.00
SURVIVOR LED FLASHLIGHT
90510: Yellow Rechargeable Light Only
$85.00
90621: Rechargeable Light Only
POLYTAC HELMET MOUNT LIGHT KIT
$55.00 $110.00
www.FireSafetyUSA.com
27 Streamlight
E-SPOT FIREBOX
VULCAN LIGHT
• 150 lumens, 8 watt spot bulb • Includes two ultra bright blue tailight LED’s • LED Fire Vulcan weighs 1.85 lbs, while Standard and Fire Vulcans weigh 3.3 lbs • All lights include shoulder strap 44000: Standard with AC/DC Charger - Yellow
$115.00
44001: Standard with Direct Wire Charger - Yellow
$105.00
44215: Standard, Light Only - Yellow
$87.50
44400: Fire with AC/DC Charger - Orange
$125.00
44401: Fire with Direct Wire Charger - Orange
$117.50
44411: Fire, Light Only - Orange
27 | FLASHLIGHTS
$95.00
• 3 C4® LEDs and deep dish parabolic reflectors • LEDs are impervious to shock with a 50,000 hour lifetime • Dual rear LEDs ensure you can be seen whether you are coming or going • Optimized electronics provide regulated intensity • 2 levels of lighting: - High – 540 lumens - Low – 330 lumens • Runtime: - High – 7 hours to the 10% output level - Low – 15 hours to the 10% output level • Selectable high or low setting • Zero-maintenance 6V, 12Ah sealed lead acid battery • Rechargeable up to 500 times • Uses same battery as the Litebox
44450: LED Fire with AC/DC Charger - Orange
$170.00
45882: E-Spot Firebox Light Only
$155.00
44454: LED Fire Light Only - Orange
$145.00
45861: E-Spot Firebox Standard System
$175.00
45901: Bulb for Non LED Vulcans SLA10-4: Battery
$7.95 $15.00
SLA10-6: Battery
$27.50
45070: Mounting Rack
$25.00
FIREBOX
• Up to 80,000 Peak Candlepower utilizing 8 watt spot bi-pin bulb • High-visibility orange, Weighs 7.4 lbs. • Standard System includes 120V AC and 12V DC chargers with shoulder strap and mounting rack • Vehicle System includes truck mountable 12V DC direct wire mounting rack and shoulder strap 45300: Firebox Light Only
$130.00
45301: Firebox Standard System
$145.00
45302: Firebox Vehicle Mount System
$140.00
E-FLOOD FIREBOX
• Six (6) C4® LEDs, impervious to shock with a 50,000 hour lifetime • Toggle switch and two (2) user programmable bright blue tail-light LEDs • 6 wide pattern parabolic reflectors produce a smooth flood pattern • Optimized electronics provide regulated intensity • Jumper selectable high or low setting • 2 levels of lighting: - High - 615 lumens - Low - 330 lumens • Zero-maintenance, 6V, 12 amp-hour sealed lead acid battery is rechargeable up to 500 times • Uses same battery as the Litebox
LITEBOX
• 80,000 Candle Power • High-visibility orange, Weighs 7.4 lbs. • Standard System includes 120V AC and 12V DC chargers with shoulder strap and mounting rack • Vehicle System includes truck mountable 12V DC direct wire mounting rack and shoulder strap 45116: Standard System
$135.00
45832: E-Flood Light Only
$177.50
45107: Vehicle Mount System
$130.00
45811: Standard System
$199.50
SLA10-6: Battery
$27.50
SLA10-6: Battery
$27.50
45911: Lamp Assembly
$15.00
45070: Mounting Rack
$25.00
877.699.3473
27
28 | FLASHLIGHTS
28 Streamlight
VANTAGE® 180
• C4® LED 250 Lumens • 2 levels of lighting: - High - 250 lumens - Low - 100 lumens • Runtime: - High – 4 hours - Low – 12 hours • Rear LED taillight changes from blue to white: - Blue for helmet mount - White for downcast flood light • Lifetime warranty • Includes batteries, wrench, and helmet bracket 88900: Orange
$72.50
88902: Black
$72.50
4AA LED FLASHLIGHT
• 67 lumens • 6.5” long, weighs 6.3 oz • High-visibility yellow • Tail-cap on/off switching • Includes 4 “AA” Alkaline batteries
KEYMATE® USB KEYCHAIN LIGHT
• Ultra-compact • USB rechargeable • 35 lumens • Three lighting modes: high, low and emergency flash 73200
$15.95
68202: Yellow Light Only
$24.95
68085: Black Jack Mount
$15.95
99075: Rubber Helmet Strap
VANTAGE® LED HELMET LIGHT
• Shock-proof • Lightweight, compact, low profile design • 115 lumens • Fits both traditional and modern style helmets 69140: Black
$115.00
69157: Red
$115.00
28
www.FireSafetyUSA.com
$5.00
Pelican | 29 Nightstick
FLASHLIGHTS 29 | FLASHLIGHTS
SAFETY LIGHT
• Lighting Versatility and Safety for the Street • 150 lumens CREE® LED • 120 lumens colored LED safety light (60 LEDs) • 35,000 hour LED life • Two switch operation • #1-Momentary or constant flashlight • #2- Safety light – constant or flashing • Oval shape is ergonomically comfortable • Non-slip textured body and soft-touch finish • Rugged engineered polymer housing • Impact & moisture resistant • Powered by 4 AA alkaline batteries (included) • Heavy duty removable magnetic clip • Limited Lifetime warranty
HELMET MOUNTED MULTI-FUNCTION DUAL-LIGHT
NSP-1170: Red/Blue
$34.95
NSP-1172: Red/White
$34.95
1260-YCONE: Yellow Cone
$3.95
1260-RCONE: Red Cone
$3.95
MINI-TAC LIGHT
• CREE® LED technology – 50,000+ hours LED • Momentary or constant-on flashlight • Sharp focused flashlight beam • Type 2 hard anodized finish • Non-slip grip • Water resistant • Impact & chemical resistant • Powered by one AA battery MT-110
$12.50
• Flashlight Lumens: 220 / 100 / 30 • Floodlight Lumens: 100 / 50 / 15 • Size / Type = 2 CR-123 batteries (Batteries Included) • Flashlight Runtime: 3.5 / 10 / 33.5 hrs • Floodlight Runtime: 10 / 21.5 / 60 hrs NSP-4650B
$69.95
MINI-TAC LIGHT
• CREE® LED technology – 50,000+ hours LED • Water resistant • Momentary or constant-on flashlight • Type II hard anodized finish • Powered by 2 AAA batteries MT-100BL: Blue
$12.50
MT-100R: Red
$12.50
MINI-TAC LIGHT
LED TRAFFIC WAND
• Bright red light for daylight or night use • On/Strobe/Off functionality • Single push button switch located on body for all modes • IP-X7 Waterproof • Lightweight for long use NSP-1632: Red
$12.50
NSP-1634: Yellow
$12.50
• Designed specifically for EMT usage • CREE® LED technology – 50,000+ hours LED • Momentary or constant-on, plus 3 user-selectable brightness settings plus strobe • Sharp focused flashlight beam • Type III hard anodized finish • Non-slip grip • Waterproof • Impact & chemical resistant MT-230
877.699.3473
$21.00
29
30 | FLASHLIGHTS
Pelican &30 UK
SABRELITE
STEALTHLITE
• Glow-in-the-dark shroud • 161 Lumens • Submersible • Lifetime warranty • 7” long
• Glow-in-the-dark shroud • 183 Lumens • Submersible • Lifetime warranty • 7” long 2410PL
2010PL
$50.00
$52.50
4AA FLASHLIGHT
• Perfect for mounting to your helmet or hard hat • Size: 5.6” long • 38 lumens 14120: 4AA Xenon Flashlight
$20.00
14506: 4AA LED Flashlight
$40.00
14851: Rylee Fire Helmet Clip
$12.50
LITTLE ED LED
• The perfect light for your turnout coat • 126 Lumens • Right Angle Head with Glow Shroud • Powered by 4 “AA” Alkaline batteries • 7.5” long • Includes stainless steel clip and key ring 3610PL
3AA FLASHLIGHT
• 110 lumens • Intrinsically safe • Push button tail switch • Size: 5.3” long 10001: 3AA LED Flashlight
$40.00
14851: Rylee Fire Helmet Clip
$12.50
30
www.FireSafetyUSA.com
$60.00
Akron 31 & FoxFury
31 | FLASHLIGHTS
REVEL SCOUT TACTICAL SCENE LIGHT • Combination flood and spot light optics • 3 modes: High - 14,000 Lumens, 1.2 hours runtime Medium - 8,000 Lumens, 3 hours runtime Low - 2,000 Lumens, 7 hours runtime • 12 lbs • Integrated support strap • Lithium-ion battery • Multi-purpose base ELRE-SCOUT
Hang Over a Door
$1,195.00
Spike into Drywall
Strap and Secure
SIDESLIDE C-CLAMP SIDE MOUNTED HELMET LIGHT
PERFORMANCE SERIES FIRE HEADLAMP
• Lumens = 200 • CR123 • Battery Life: 4-10 hours 480-006
• Lumens = 82 • Size = 5.5” x 1.0” x 1.1” • Battery Life: 3-8 hours $124.99
COMMAND 10 SERIES HEADLAMP
$112.99
COMMAND 20 SERIES HEADLAMP
• Lumens = 65 • Size / Type = 4 AA (Batteries Not Included) • Battery Life: Up to 28 hours 410-L06
400-006
• Lumens = 100 • Size / Type = 4 AA (Batteries Not Included) • Battery Life: Up to 14 hours $67.99
420-006
877.699.3473
$93.99
31
|| SAFETY 32 SAFETY
Vests & Jackets Vests & Jackets 32 BOMBER JACKETS
• Fleece lined bomber jacket is loaded with features! PU coated polyester with fully taped seams and concealed, detachable hood. Elastic ribbed waist, wrist, and collar to keep out the cold. Inside breast and outside slash pockets, a cell phone pocket, and a warm removable fleece liner make this jacket exceptional. The fleece liner zips in and out • Choose Lime or Orange • Meets ANSI / ISEA 107-2004 Class 3 standard • Optional Silver Reflective Logos: Star of Life or Fire Dept Maltese Cross • Choose Lime or Orange • Medium - 6XL BOMBER JACKET-LIME
$50.00
BOMBER JACKET-ORANGE
$50.00
BOMBER JACKET-LIME-MALTESE
$60.00
BOMBER JACKET- ORANGE-MALTESE
$60.00
BOMBER JACKET-LIME-SOL
$60.00
BOMBER JACKET-ORANGE-SOL
$60.00
HIGH VISIBLITY BEANIE • High Visibility • Knit • Acrylic • Beanie 75-8201
$10.00
BREAKAWAY SAFETY VEST
• New ANSI 207-2006 Public Safety B reakaway Vests • One Size Fits Most, Adjustable and Fits: [Large - 4XL] • Lime Vests with OrangeSilver/Orange Triple Trim • 5 Point Breakaway Design • Radio Loop on Both Front Sides • Pen Pocket • Radio Pocket • Tear Away front Zipper • Two Inside Pockets • Optional BLACK “FIRE” or “EMS” logo available on back BREAKAWAY-VEST
$20.00
BREAKAWAY-VEST-FIRE
$25.00
BREAKAWAY-VEST-EMS
$25.00
32
ULTRABRIGHT RED-FIRE SAFETY VEST • 6 point breakaway system • Auxiliary velcro on shoulders • Double velcro zippers • Large front pocket • 5 Point Breakaway Design • DRD or D-Ring access point • Mic tabs and pen holder • Performance cut • ANSI 207-2015 • Fits sizes regular - 3XL BREAKAWAY-VEST
www.FireSafetyUSA.com
$38.99
Traffic Traffic
33
SAFETY 33 || SAFETY
POP-UP LIGHTED SAFETY CONES
• Pack of [5] 28” reflective cones with light • Includes a carry bag • Light has steady on or flashing strobe • Also available with upgraded 8# black base
FIRE LINE DO NOT CROSS TAPE • Standard 3” x 1000’ Rolls
FIRE-LINE-TAPE: “FIRE LINE” Tape FIRE-LINE-CASE: Case of 12
DF3003X-48PNK
$285.00
B36FR: BAG FOR 36” SIGN KIT
$45.00
B48FRM: BAG FOR 48” SIGN KIT
$45.00
Velcro Sign Overlay
$22.50
$185.00
$140.00
SAFETY CONE
• Lightning fast setup, fully customizable • Ultra compact system storage dimensions • Available in 36” or 48” systems • Includes sign and stand $250.00
$125.00
3022781: 5-pack with Heavy Duty Black Rubber Base $12.50
FOLD AND ROLL SIGN SYSTEM
DF3000X-36-PNK
POP-CONE-PACK-5
• Orange Cone with Reflective Collars 03-500-21: 18” Cone
$17.95
03-500-24: 28” Cone
$22.95
AUTO EMERGENCY KIT
• Polyester bag keeps lights organized • 1W LED • 4AA batteries (not included) • Flash: Up to 140 hours • Steady: Up to 40 hours • Crush Resistance: 20,000 lb vehicle FA-B3F-3 Beacons: FlareAlert Kit
$65.00
FA-B8F-8 Beacons: FlareAlert Kit
$295.00
FA-RB.2: Red Beacon Only
$18.50
FA-YB.2: Yellow Beacon Only
$18.50
LED BLINKING STOP/SLOW PADDLE HAND HELD WITH LIGHTS
• LED light panels are lightweight Weighing only 2.1lbs • Dimensions: 23.5” x 18” x 1.5”, (18” Sign Face, 5.5” Stem) • LEDs: 52 White Superbright LED’s • Visible up to 1/8 of a Mile • Reflective Sheeting: 3M Engineer Grade • Illumination: Constant, Flashing (60/min) On-Off-Flash • Battery Type: Lithium Ion Rechargeable Batter Pack w/Charging Cord • Battery Life: 5+ Years • Warranty: 1 Year 18SL-STSLS
EMERGENCY FLARES
• 36 flares per pack • Optional Flare Holder holds a dozen 30mn flares • Choose with or without spikes or with wire stand
$230.00
0730: Flare Pack without Spikes
$84.99
2730: Flare Pack with Spikes
$87.99
9340: Flare Pack with Stand
$89.99
7830: Flare Holder
$18.99
877.699.3473
33
34 | HAZMAT
Leak & Repair Kits34
GOLF & FOOTBALL PLUG
• Polyurethane impregnated, water activated foam plug • It works on almost anything, from a pipe to a tanker, to a railcar - even a boat • Initally pliable to insert into a void and quickly expands and hardens to fill the void • It can even be applied below the water level! • Golf Plug - 1 1/2” Round SPG: Golf Plug
$47.50
SPF: Football Plug
$90.00
“C2-KIT” PIPE LEAK CONTROL KIT
• The “C-2” Hazmat Kit Contains ten pipe bandages for covering pipe sizes from 1/2” to 4”, soft and hard neoprene liner material and comes complete with your choice of standard tools. Carrying case included with the purchase of this Hazmat kit C-2-KIT
$460.00
C-2-NS-KIT: Non-Sparking Kit
$750.00
PETROLEUM SORBENT PAD
• 3M™ 17” X 19” Petroleum Sorbent Pad absorbs 37.5 gal of oil, that is 100% more by weight than other leading melt blown sorbents. • Case of 100 pads 3MRHP-156
$69.00
“D-KIT” DRUM REPAIR KIT
• The “D-KIT” drum repair kit contains components to repair punctures, cracks, gashes or surface rotting of containers which allow liquid or bulk hazardous material to leak D-KIT
$330.00
D-NS-KIT: Non-Sparking Kit
$495.00
PLUG N’ DIKE PRE-MIX
• Plug N’ Dike Pre-Mix is a non-toxic material which forms an immediate seal to control flammable and/or hazardous leaks and spills. The Plug N’ Dike Pre-Mix is combination of a polymer in a bentonite base that produces a seal against penetration of fuels and chemicals. No surface preparation needed. Plug N’ Dike Pre-Mix is a plugging material; it does not absorb
PLUG N’ DIKE GRANULAR
• Choose one gallon or five gallon pail of dry granular Plug N’ Dike. Just knead with water to form a sticky paste. A great first response method to control many spills and solve maintenance problems. Used to plug fuel and most chemicals, to dike pressurized or large spills and to seal off drains. Can be used to keep leaking equipment operating without complete shutdown
“AE-KIT” HAZMAT KIT
• Series “AE” Hazmat Kit Contains: Sheet metal screws with neoprene compression seals. Tubeless tire repair kit. OSHA-approved 200 foot roll of barricade tape. One 8” x 12” piece of solid neoprene and one 22” piece of foam material. Lead wool epoxy putty that hardens like steel, hot or cold hose repair tape, basic tool set for patching, twin “T” stainless plate with foam, an 8” x 12” stainless backed neoprene patch-hardwood cribbing, two 22’ nylon straps and buckles. Two “T” bolt crack patches for awkward shaped breaks. Six surface plugs for curved surfaces, wedged wooden plug covered with felt and 2 ball plugs. Carrying case included with the purchase of this Hazmat kit. Ship weight 33 lbs.
4-PMP: One Pound of Pre Mix
$25.00
8-PMP: Ten Pounds of Pre Mix
$40.00
10P: One Gallon Pail of Granular
$20.00
AE-Kit
$625.00
48P: Five Gallon Pail of Granular
$45.00
AE-NS-KIT: Non-Sparking Kit
$875.00
34
www.FireSafetyUSA.com
35 Grain Bin Rescue
35 | HAZMAT
GREAT WALL OF RESCUE
• The Great Wall of Rescue was designed to adapt to a multitude of grain entrapment rescue scenarios. The lightweight wall sections are easily maneuvered and can be aligned to form a wall, a tube, or other irregular shapes depending on the rescue situation and the number of panels available. Anodized ball-and-socket joints ensure smooth panel connection, and the joint was specially designed to have some range of movement, adding to the variability in shape • Made of lightweight aluminum, rescuers can easily lift a panel up and join with another. Each panel weighs 20 lbs and is 16” wide x 5’ long. The sleek finish allows the panels to slide easily into grain. Anodized ball/socket joints promote smooth and easy panel connection and are resistant to jamming. The ball/socket joint was specifically designed so that the panels have some range of movement, adding variability to the possible shapes. The bends in the panels along with hinge that runs the entire length of the panel gives the panel added strength and will not cave in on the victim. When the panels are inserted into the grain mass, the grain is removed from around the victim to relieve pressure • We provide accessories to aid in rescue. Platforms are provided for a sturdy base for rescuers. The insertion step allows a rescuer to use his own body weight to push sections into grain, as opposed to hammering. The step also can be used to assist victims in climbing out of the grain as they are able. The removal pipe can be used as a support handle for the victim, or to remove the panels after rescue is completed. The carrying case can store up to 8 panels and has interior straps to bind all accessories • Basic Package includes: 6 Wall Panels, 1 Step, 1 Pipe, 4 Rescue Platforms, 1 Case • Supreme Package includes: 8 Wall Panels, 1 Step, 1 Pipe, 4 Rescue Platforms, 1 Case • Tech Packege includes: 12 Wall Panels, 1 Step, 1 Pipe, 8 Rescue Platforms, 1 Case • Optional Rescue Auger can be purchased to help speed the removal of grain from inside the rescue tube • The 3” Rescue Auger is compatible with any grain rescue tube and is powered by any 1/2” cordless drill • Flow rate of 1.5 bushels per minute MILL FINISH
CALL NOW FOR A
FREE LIVE DEMO
TUFF KOTE
$1,800.00
GWOR-BASIC: Basic Package
$2,150.00
$2,150.00
GWOR-SUPREME: Supreme Package
$2,850.00
$3,100.00
GWOR-TECH: Tech Package
$3,900.00
RESCUE-AUGER
$789.00
877.699.3473
35
36 | HAZMAT
36 Detectors Smoke, CO & Voltage AC HARDWIRED SMOKE ALARM
• Provides a Hush™ feature to quickly silence nuisance alarms • Tamper resist locking feature • Alarm memory flashes red LED indicating which unit was the initiating alarm in interconnected system • Battery backup • Interconnectable with up to 24 devices (of which 18 can be initiating including smoke, CO and heat alarms 21006376
SELF DEFENSE SPRAY
BATTERY OPERATED COMBINATION SMOKE & CARBON MONOXIDE ALARM
• Designed for convenient carry • Fires a powerful cone-shaped stream of 3-in-1® Formula • Comes standard with a snap-close holster and key ring • Pocket Size
• Voice Alarm • Combined Carbon Monoxide and Smoke Alarm • LEDs – Flashing green for normal operation and flashing red for alarm condition • Low Battery Warning • Battery Powered • Battery Safeguard – The battery door will not close unless the batteries are properly installed. • Hush® Feature – Temporarily silences nuisance alarms. • Ionization Smoke Alarm Sensor 900-0102
$19.95
SDS
$15.00
$47.50
FIRECRAFT TRACER 3
• A replacement for the Tac Stick • Detects dangerous AC current from a safe distance • Pinpoints direction of downed lines • Pocket Size • Made in the USA
NIGHTHAWK™ AC PLUG-IN OPERATED CARBON MONOXIDE ALARM WITH DIGITAL DISPLAY • Digital display updates this reading every 15 seconds • Test/Reset Button • Peak Level Button • 9V Battery Back-Up 900-0076
Firecraft Tracer
$45.00
RADON GAS DETECTION HOME TEST KIT
LEADER VOLT
• A replacement for the Tac Stick • Detects dangerous AC current from a safe distance • Pinpoints direction of downed lines • 3 sensitivity modes
• Professional lab analysis included at an EPA registered radon testing lab 442020
36
$145.00
$18.50
Leader Volt
www.FireSafetyUSA.com
$345.00
37 Gas Detection
37 | HAZMAT
BW CLIP SINGLE GAS DETECTOR
• 2 year battery life • Maintenance free • No calibration or sensor replacements • No battery replacement or charging required
GASALERT QUATTRO MULTI-GAS DETECTOR
BWC2-M: CO 2 YEAR
$175.00
BWC2-H: H2S 2 YEAR
$175.00
BWC2-X: O2 2 YEAR
$175.00
BWC2-S: SO2 2 YEAR
$295.00
BWC3-M: CO 3 YEAR
$225.00
BWC3-H: H2S 3 YEAR
$225.00
• Continuous LCD shows real-time gas concentrations • LEL, O2, H2S, CO • Compact and lightweight design makes it comfortable to wear • Water-resistant • Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up • Tamper-proof, one button operation • Equipped with internal vibrating alarm for high noise areas • Powered by a lithium polymer battery • Available in alkaline or rechargeable QT-XWHM-A-Y-NA: Alkaline
$625.00
QT-XWHM-R-Y-NA: Rechargeable
$695.00
GASALERT MICROCLIP XL 4-GAS DETECTOR
GASALERT MICROCLIP X3
• Continuous LCD shows real-time gas concentrations • LEL, O2, H2S, CO • Ergonomic design makes it comfortable to wear • IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly • Tamper-proof, one button operation • Equipped with internal vibrating alarm for high noise areas • Five-year life expectancy - plus a three-year warranty • An all-new oxygen sensor that operates consistently for five years MCX3-XWHM-Y-NA
$650.00
• Continuous LCD shows real-time gas concentrations • Compact and lightweight design makes it comfortable to wear • Water-resistant • LEL, O2, H2S, CO • Full function self-test of sensor, battery status, circuit integrity and audible/ visual alarms on start up • Bright wide-angled visual alarm bars • Built-in concussion-proof boot • IntelliFlash verifies operation and compliance to both the user and supervisor • Tamper-proof, one button operation • Compatible with the Sampler motorized remote sampling pump • Equipped with internal vibrating alarm for high noise areas • Powered by a lithium polymer battery • Multi-language support in English, French, German, Spanish and Portuguese MCXL-XWHM-Y-NA
$650.00
CG-Q34-4: 3 Liter Calibration Gas
$180.00
CG-Q58-Y: 5 Liter Calibration Gas
$250.00
877.699.3473
37
38 | HAZMAT
38 Smoke Generators
SMOKE 2 GENERATOR
• Removable and robust remote control allowing multi- purpose use for triggering smoke emissions at a distance • 1000W, Effective coverage of 500 cubic meters/min in continuous operation SMOKE 2
$1,050.00
FLUID-HEAVY: Sold in cases of (4) 5 Liter Bottles
$325.00
BATTLE FOGGER
• Huge, continuous fog output from a re-engineerd heat exchanger. An extremely effective fog machine incorporates a large heating block, a powerful whisper-quiet pump, and Rapid Change Technology. A one-year warranty on all parts and service, a lifetime warranty on the heat exchanger. A large one-gallon integrated fluid tank prevent leaks and drips, a special hammer-tone finish resists scratches and wear, and a built-in handle balances off a sleek, rugged chassis. Comes standard with a 25ft. deluxe remote, an onboard microprocessor, and a spare replacement Rapid Change Rebuild Kit, all for much less than any other machine in its class BF TELE-MAX: 4 x One Gallon Jugs of Fluid
$1,295.00 $150.00
SMOKE 4 GENERATOR
• Removable and robust remote control allowing multi-purpose use for triggering smoke emissions at a distance • Possibility to program the diffusion for dosing the volume of smoke required for each scenario and choose the smoke diffusion time • Continuous operation at reduced flow by default for a maximum fluid economy • 1500W, Effective coverage of 1000 cubic meters/min in continuous operation SMOKE 4
$1,695.00
FLUID-HEAVY: Sold in cases of (4) 5 Liter Bottles
$325.00
ELECTRIC SMOKE MACHINE CLASSIC DISPOSABLE SMOKE CANDLES
• Inexpensive choice for creating huge volumes of white smoke • Highly effective means of producing a realistic disaster scene • 1A: 4000 cubic feet of smoke in 30 seconds • 2B: 8000 cubic feet of smoke in 60 seconds • 3C: 40,000 cubic feet of smoke, burns 2-3 minutes • W3C: Same as the 3C, but double wicked with quick clips • All of the above smoke sticks are sold in a case of 12 units 1A
$50.00
• With a powerful 1500 watt heating core, and reliable high pressure piston pump, this machine delivers an impressive output of up to 20,000 cfm. The ST-10 will quickly fill your training area with dense, persistent, non-irritating smoke with excellent obscuring power. The ST-10 comes standard with a 10 meter wired remote control which makes operation easy. No more searching for controls in a smoke filled room. This hand held remote features a selection for manual, or self timed (unmanned) operation.Simply set the dial to control flow rate, duration of smoke blasts, and interval between blasts. The ST-10 will fill the area with smoke at a steady constant rate, therefore reducing the chances of over concentration and residues. ST-10: SMOKE MACHINE
$700.00
2B
$55.00
3C
$125.00
C-11: Smoke Fluid Standard
$40.00
W3C
$115.00
C-11-XP: Smoke Fluid Premium
$42.50
38
www.FireSafetyUSA.com
39
SCBA
39 | HAZMAT
SCBA BRACKET WITH SAFETY STRAP •
In crew areas where SCBA’s are stored, keep them locked securely in place with this system. You can don the SCBA while enroute and keep it safely secured. When you reach your destination, pull the lanyard from between your legs, or along side the seat and you are ready to go!! The 14000 fits all brands and tank sizes
14000
$90.00
SCBA BRACKET
LLS: Lock and Load Strap Assembly
• Heavy duty steel, coated with nylon • Holds 8 cylinders • Collapsed size: 30” L x 15” W x 8” H BC-8
$135.00
MULTI-PURPOSE MOBILE BOTTLE CART
• Deluxe SCBA brackets constructed of durable coated steel ULLH-ES: SCBA Bracket with Strap & Ejector Spring
GROVES COLLAPSIBLE BOTTLE CARRIER
• 18” Deep x 24” Long x 39” Tall • Holds nine 30mn bottles or six 60mn bottles
$100.00 $50.00
MBR-MP
$230.00
PLASTIC AIR CYLINDER RACK
SCBA BRACKET (ASSEMBLED) • Nylon protective coating • C-Clips made of Steel • Lifetime Warranty
• MBR-16 holds 16 bottles total on 4 shelf levels. 36” Long x 24” Deep x 38” High • MBR-24 holds 24 bottles total on 6 shelf levels. 36” Long x 24” Deep x 59” High • MBR-28 holds 28 bottles total on 7 shelf levels. 36” Long x 24” Deep x 68” Highy
15251: 30 Min. High Pressure
$40.00
16751: 30 Minutes Low Pressure and 45 Minutes High Pressure
$40.00
17251: 60 Minutes Low Pressure and 60 Minutes High Pressure
$40.00
35251: 5.25” C-Clip
$13.00
MBR-16
$750.00
36751: 6.10” C-Clip
$13.00
MBR-24
$895.00
37251: 7.25” C-Clip
$13.00
MBR-28
$995.00
ARSENAL® SCBA MASK BAG
THREAD SAVERS
• Protect the threads on your SCBA cylinder valve
• 1000D nylon main material • Drawstring closure with hi-vis loop opening for one-handed operation • Reflective stripe for better visibility • Spring loaded steel clasp attaches to gear or belt • ID window for user identification • Storm drain ventilation on the bottom of bag • 8.5in x 8.5in x 12in (21cm x 21cm x 31cm)
TS20Y: Yellow
$4.00
TS20O: Orange
$4.00
5080: Standard
$25.00
TS20G: Glow
$4.00
5080L: Fleece Lined
$30.00
877.699.3473
39
40 | HOSE
Fire Hose
| HAZMAT
40 7F FORESTRY HOSE • • • • •
8D DOUBLE JACKET FIRE HOSE • • • • •
Polyester double jacket with ozone resistant rubber lining Available in white, red, yellow, blue, orange, green, or tan Full 10-Year Warranty 400 PSI service pressure, 1200 PSI burst Made in the USA!
1.5” x 50’ White
$100.00 1.5” x 50’ Colored
$110.00
1.75” x 50’ White
$110.00 1.75” x 50’ Colored
$125.00
2.5” x 50’ White
$150.00 2.5” x 50’ Colored
$175.00
3.0” x 50’ White
$225.00 3.0” x 50’ Colored
$240.00
Recommended for all wildland and forestry applications Meets or exceeds US Forest Service F-187 Standard Single jacket 100% high tenacity polyester 300 PSI service pressure, 900 PSI burst pressure Full 10-Year Warranty against defects in materials
1.0” x 50’
$65.00
1.5” x 50’
$75.00
1.0” x 100’
$105.00
1.5” x 100’
$115.00
REEL LITE BOOSTER HOSE
• Polyester single jacket hose with ultra-durable outer cover, circular woven with helical inner reinforcement RL10RB: 1.00” x 50’ Hose
$150.00
RL10RD: 1.00” x 100’ Hose
$260.00
HFX RUBBER FIRE HOSE • • • •
Available in yellow or red 300 PSI service pressure, 900 PSI burst Full 10-year warranty Made in the USA!
MAXI-FLEX PVC HARD SUCTION HOSE • 10’ sections, coupled NST threaded or Storz
1.5” x 50’ Hose
$160.00 1.5” x 100’ Hose
$275.00
1.75” x 50’ Hose
$170.00 1.75” x 100’ Hose
$295.00
2.50” x 50’ Hose
$215.00 2.50” x 100’ Hose
$375.00
3.0” x 50’ Hose
$270.00 3.0” x 100’ Hose
$450.00
4.0” x 50’ Hose
$350.00 5.0” x 50’ Hose
$425.00
4.0” x 100’ Hose
$550.00 5.0” x 100’ Hose
$625.00
MF25R1: 2.5” x 10’ with Rocker Lugs
$125.00
MF45L1: 4.5” x 10’ with Long Handles
$350.00
MF50L1: 5.0” x 10’ with Long Handles
$325.00
MF60L1: 6.0” x 10’ with Long Handles
$375.00
MF40S1: 4.0” x 10’ with 4.0” Storz Couplings
$325.00
MF50S2: 5.0” x 10’ with 5.0” Storz Couplings
$395.00
FIRE ENGINE BOOSTER HOSE
• C omes standard with aluminum Male xF emale hose couplings BH75RB: .75” x 50’ Booster Hose BH75RD: .75” x 100’ Booster Hose
$410.00
BH10RB: 1.0” x 50’ Booster Hose
$310.00
BH10RD: 1.0” x 100’ Booster Hose
$495.00
BULK LDH HOSE PACKAGE
• FREE SHIPPING on bulk LDH fire hose purchases! • Call us to customize your order with assorted sizes & lengths! 11 Sections of 5.0” x 100’ LDH Rubber Hose
$6,875.00
12 Sections of 4.0” x 100’ LDH Rubber Hose
$6,600.00
40
$250.00
www.FireSafetyUSA.com
41
BRUTE X-PANDER
• Compact Hand Pump Expander, used for 1” - 3” couplings • All-in-one design means fewer parts and no hydraulic connections making the X-Pander our most reliable and service free hand expander ever • Size: 13” W x 17” D x 10” H, Weight: 45 lbs. • Basic Bundle includes: Brute X-Pander, Hose Cutter, OD Tape, and Ring Removal Tool Also 1 1/2”, 1 3/4”, and 2 1/2” Expansion Units! • Deluxe Bundle includes: Brute X-Pander, Hose Cutter, OD Tape, and Ring Removal Tool Also 1”, 1 1/2”, 1 3/4”, 2 1/2”, and 3” x 2 1/2” Expansion Units!
Hose Equipment
| 41 HOSE
BRUTE MODEL 2 ELECTRIC EXPANDER
• Electric Hydraulic Expander, used for 1” - 6” couplings • 1 1/2 h.p., Single Phase, 220 v. • Total thrust – 38,000#. • Size: 22” W x 22” D x 16” H, Weight: 350 lbs. • Basic Bundle includes: Brute Model 2, Hose Cutter, OD Tape, and Ring Removal Tool. Also 1 1/2”, 1 3/4”, and 2 1/2” Expansion Units! • Deluxe Bundle includes: Brute Model 2, Hose Cutter, OD Tape, and Ring Removal Tool. Also 1”, 1 1/2”, 1 3/4”, 2 1/2”, and 3” x 2 1/2” Expansion Units!
BRUTE X-PANDER
$2,795.00
BRUTE MODEL 2
$6,395.00
BRUTEXSTD: Basic Bundle
$4,895.00
BRUTE2STD: Basic Bundle
$8,395.00
BRUTEXDLX: Deluxe Bundle
$5,595.00
BRUTE2DLX: Deluxe Bundle
$9,095.00
HOSE WASHER
HOSE GASKETS
• Choose the hose washer for 3” or 5” diameter hose • Both have 2.5” Swivel Female Connections
• Swivel, Tail, and Storz Gaskets SWIVEL
TAIL
14041: 1.0”
$1.50 14065: 1.0”
$1.50
14035: 1.5”
$1.50 14032: 1.5”
$1.50
14084: 2.5”
$2.00 14088A: 1.75”
$1.50
14024: 5.0”
$9.50 14016: 2.5”
$2.00
14023: 6.0”
10.00 14039: 3.0”
$3.00
STORZ PRESSURE
60349733: Hose Washer for up to 3”
$375.00
39800: Hose Washer for up to 5”
$850.00
STORZ SUCTION
14055-P: 4.0”
$10.00 14150-S: 4.0”
$15.00
14143-P: 5.0”
$13.00 14151-S:5.0”
$17.00
14167-P: 6.0”
$27.00 14167PS: 6.0”
$24.00
LEATHER HOSE JACKET
• Used to temporarily seal leaks on 2.5” hose #9200: Leather Hose Jacket
$60.00
BOOSTER HOSE REEL
• Reels are available in silver, red or black • F4024-17-18 Holds 50’ of 1.0” or 100’ of 3/4” Booster Hose • F4038-17-18 Holds 100’ of 1.0” or 200’ of 3/4” Booster Hose
FORESTRY HOSE CLAMP
• Clamps 1.0” or 1.5” forestry hose K47
$50.00
F4024-17-18: Manual Rewind Reel
$350.00
F4024-17-18E: Electric Rewind Reel
$675.00
F4038-17-18: Manual Rewind Reel
$350.00
F4038-17-18E: Electric Rewind Reel
$675.00
877.699.3473
41
42 | HOSE
Hose Equipment
42
HEBERT HOSE CLAMP
• Small Diameter Clamp for 3” or smaller hose • Large Diameter Clamp for 6” or smaller hose • Optional running board bracket HHC3: 3” Hebert Hose Clamp
$225.00
HHC6: 6” Hebert Hose Clamp
$375.00
HHC-RBB: Bracket
LARGE DIAMETER HOSE WINDER
$45.00
HOSE ROLLER
• Choose from one person or two person hose rollers HHR-1
$150.00
HHR-2
$130.00
• Wind 100-foot sections of LDH up to 6” wide in seconds. Having the ability to steer the winder while rolling the hose, the LDHW turns winding into a one-man operation. With no need to recharge batteries, downtime is drastically reduced. The LDHW drains the hose as you wind it, prolonging hose life. Reduces the risk of back injuries by limiting firefighter fatigue LDHW
$1,275.00
FORESTRY HOSE PACK
• This bag can be used for wildfires or in high-rise buildings. It will hold more hose than you care to pack (150’ of 2” hose). Made of 1000 denier Cordura® nylon, double stitched, padded shoulder straps, outside zipper pocket, web carrying handles, protective flap and 3M™ ScotchliteTM Reflective Material. Color: Red. • Measures 11”D x 16”H x 18”W. 3200 cu. in. 420RD
$130.00
GRIPPER HOSE SYSTEM
• The gripper has a padded high visibility shoulder sling, with three 2” wide • 42” long 3000-pound strength webbing to secure the hose. • Utilizes cam buckles and torque rings. Wt. 24 oz. GRP-57
$125.00
HIGH RISE HOSE PACK
DOUBLE DONUT STRAP
• A hose pack that allows one person to carry up to 150 ft. of 1.75” hose with nozzle and adapters for standard pipe hook ups. This high-rise hose pack can also be used for wildland fires. Made of 1000 denier Cordura® nylon with web carrying handles and shoulder strap for use as a back pack • Color: Red • Measures 26”H x 18”W x 7”D. Wt 28 oz.
• The Double Donut Strap holds two 50’ sections of 1.75” hose. Heavy-duty nylon webbing and high- sheer strength Velcro® make up this strong and functional product. Consists of two nylon straps with a Velcro® closure attached to a 3-inch center ring and shoulder strap DD-100
423RD
$70.00
$85.00
HOSE STRAP
• FB602 holds three 50’ sections of 1.5” or 2” hose & nozzle FB602
$55.00
HOSE RAMPS
• 12” wide x 40” long hose ramps for 3” to 5” LDH hose. Ramps have reflective strips for visibility, and are made of fiber reinforced rubber for durability and ease of use • Sold in Pairs
42
39540R: Fits 3” - 4” Hose
$425.00
39600: Fits 5”’ Hose
$495.00
www.FireSafetyUSA.com
43
Hose Equipment
| 43 HOSE
MOBILE HOSE CART
• Available in two tier or three tier units • Heavy duty steel rails with durable red powder coat finish • Total weight capacity 4,400 lbs • Two tier holds either 1300’ or 2000’ of 2” • Three tier hold either 2000’ or 3000’ of 2” HC-64-2 TIER
$1,425.00
HC-96-2 TIER
$1,825.00
HC-64-3 TIER
$1,650.00
HC-96-3 TIER
$2,225.00
HOSE TESTER WITH PRESSURE WASHER •
The #HT100 is a easy to use, comes standard with four outlets, stainless steel balls valves, 3 GPM at 600 PSI. Capable of testing up to 6” diameter hose, and up 300 ft per discharge. Also included is a built in pressure washer, includes 25 ft of 3/8 non marking hose with quick release, heavy duty wand & handle, a quick connect injector and metering valve for adding cleaning agents to water supply, stainless steel nozzle with stream straightener. Comes standard with our easy to use wheeled cart, fits through a standard 36” door way
HT-100: Hose Tester with Pressure Washer
$2,395.00
HT-5025: Hose Tester without Pressure Washer
$2,195.00
PORTABLE HOSE RACK
• The rugged, all-steel American Made racks are safer than their counterparts and they efficiently resist rust and mildew • Each tier holds 1000’ of hose 81008002: 2-Tier Hose Rack
$1,399.00
81008013: 3-Tier Hose Rack
$1,599.00
MOBILE HOSE DRYER
• No more climbing to hang hose • Stores and dries in a small area • Durable red powder coated finish • Can be used with Hose winder MHD-80
HOSE WINDER
• Fits mobile, stationary and fixed racks • One person operation • Fits 1” to 4” hose • Optional Trailer hitch mount #TM-2 HW-1
$435.00
TM-2
$125.00
$1,475.00
FIRE HOSE TESTERS
• 3 GPM up to 500 PSI • 1 HP Electric Motor, TEFC, 110/220V, 50 or 60 Hertz capability • Four independently controlled outlet ball valves, with NST couplings • Stainless Steel liquid-filled gauge ensures accurate readings • Automatic Pressure regulator with inlet bypass • Rugged roll cage construction, protects pump from damage • Five year product warranty from defects • Shipping Weight: 175 lbs. FH-3: Electric 3 GPM, 500 PSI, Hose Tester FHWA-1: Pressure Washer Wand Kit w/50’ of Hose
$2,450.00 $425.00
DUAL PURPOSE DRYING RACK
• Easily dries hoses and gear • The rugged, all-steel Econo-Raks are safer than their counterparts and they efficiently resist rust and mildew 81008014
877.699.3473
$1,250.00
43
FIRE44 SUPPRESSION |
44 Adapters
LIGHTWEIGHT CAP WITH CHAIN
MOUNTING PLATES
1.5”
• Available in sizes 1” thru 6” threaded • Lightweight aluminum finish • Choose male or female MALE
2.0”
$19.50 $40.00
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
$25.00
$30.00
$55.00
$42.50
$50.00
$57.50
$75.00
FEMALE
M-10: 1.0”
$10.00
FM-10: 1.0”
$32.50
M-15: 1.5”
$12.50
FM-15: 1.5”
$15.00
M-25: 2.5”
$15.00
FM-25: 2.5”
$25.00
M-30: 3.0”
$30.00
FM-30: 3.0”
$45.00
M-40: 4.0”
$30.00
FM-40: 4.0”
$57.50
M-45: 4.5”
$40.00
FM-45: 4.5”
$62.50
M-50: 5.0”
$45.00
FM-50: 5.0”
$65.00
M-60: 6.0”
$45.00
FM-60: 6.0”
$72.50
STORZ MOUNTING PLATES
• Available in sizes 4.0”, 5.0”, and 6” Storz • Lightweight aluminum finish SMP-40: 4”
LIGHTWEIGHT PLUGS WITH CHAIN AND ROCKERLUG HANDLES 1.5”
2.0”
2.5”
3.0”
$22.50 $50.00 $25.00 $42.50
3.5”
4.0”
4.5”
5.0”
6.0”
$62.50
$55.00
$62.50
$70.00
$82.50
STORZ X FEMALE RIGID ADAPTERS, #S-37 FEMALE
4.0” STORZ
5.0” STORZ
2.5”
$90.00
$120.00
3.0”
$105.00
$130.00
4.0”
$110.00
$135.00
4.5”
$115.00
$135.00
5.0”
$120.00
$140.00
6.0”
$135.00
$150.00
$27.50
SMP-50: 5”
$27.50
SMP-60: 6”
$45.00
TRI-LOCK KWIK TACH MOUNTING PLATES
• Fits female threads from 1.5” thru 6” • Ideal for mounting nozzles, wyes or adapters QL-48Z-15: 1.5”
$42.50
QL-48Z-25: 2.5”
$42.50
NM-30: 3.0”
$55.00
NM-40: 4.0”
$80.00
NM-45: 4.5”
$80.00
NM-50: 5.0”
$90.00
STORZ X MALE RIGID ADAPTERS, #S-36 MALE
SC-4: 4.0” Storz Cap with Chain
$55.00
SC-5: 5.0” Storz Cap with Chain
$70.00
$90.00
$110.00
3.0”
$100.00
$120.00
4.0”
$100.00
$120.00
4.5”
$105.00
$125.00
5.0”
$120.00
$125.00
6.0”
$120.00
$135.00
STORZ X FEMALE SWIVEL ADAPTERS, #S-54RL FEMALE
4.0” STORZ
5.0” STORZ
$105.00
$125.00
3.0”
$115.00
$150.00
4.0”
$130.00
$150.00
4.5”
$140.00
$145.00
5.0”
$150.00
$150.00
6.0”
$175.00
$175.00
STORZ X FEMALE 30-DEGREE ELBOWS FEMALE
STORZ X STORZ ADAPTERS
5.0” STORZ
2.5”
2.5”
STORZ CAPS WITH CHAINS
4.0” STORZ
4.0” STORZ
5.0” STORZ
2.5”
$135.00
$160.00
4.0”
$140.00
$170.00
4.5”
$195.00
$175.00
SSR: 4.0” x 5.0” Rigid
$170.00
5.0”
$165.00
$185.00
SSS: 4.0” x 5.0” Swivel
$275.00
6.0”
$170.00
$190.00
44
www.FireSafetyUSA.com
45 Adapters 1.0”
1.5”
1.0”
$20.00
$50.00
2.0”
2.5”
1.5”
$50.00
$25.00
$50.00
$40.00
2.0”
$50.00
$50.00
$40.00
2.5”
$40.00
$40.00
$29.00
3.0”
3.5”
4.0”
45 | FIRE SUPPRESSION 4.5”
5.0”
6.0”
DOUBLE FEMALE NH ADAPTERS
$75.00
$130.00
$85.00
$120.00
$220.00
$170.00
3.0”
$75.00
$65.00
$145.00
$150.00
$180.00
$195.00
$260.00
3.5”
$130.00
$145.00
$85.00
$155.00
$175.00
$200.00
$260.00
4.0”
$85.00
$150.00
$155.00
$85.00
$100.00
$170.00
$175.00
4.5”
$120.00
$180.00
$175.00
$100.00
$100.00
$215.00
$155.00
5.0”
$220.00
$195.00
$200.00
$170.00
$215.00
$220.00
$165.00
$170.00
$260.00
$260.00
$175.00
$155.00
$165.00
$145.00
2.5”
3.0”
3.5”
4.0”
4.5”
5.0”
6.0”
6.0” 1.0'
1.5”
1.0”
$20.00
$50.00
1.5”
$50.00
$15.00
$50.00
$35.00
$50.00
$50.00
$70.00
$95.00
$70.00
$20.00
$40.00
$100.00
$100.00
$95.00
$40.00
$55.00
$90.00
$125.00
3.5”
$100.00
$90.00
$80.00
$100.00
4.0”
$100.00
$125.00
$100.00
4.5”
$150.00
5.0”
$160.00
$140.00
6.0”
$175.00
$150.00
4.0”
4.5”
2.0” 2.5”
$50.00
$35.00
3.0”
2.0”
$50.00
DOUBLE MALE NH ADAPTERS
$150.00
$160.00
$175.00
$60.00
$90.00
$140.00
$150.00
$90.00
$65.00
$110.00
$135.00
$110.00
$80.00
$150.00
$135.00
$150.00
$125.00
5.0”
6.0”
MALE
FEMALE 1.0”
1.5”
2.0”
2.5”
1.0”
$15.00
$20.00
$40.00
$30.00
1.5”
$20.00
$15.00
$20.00
$20.00
$45.00
$35.00
$35.00
$50.00
$65.00
$20.00
$55.00
$25.00
$35.00
$40.00
2.0” 2.5”
$45.00
3.0”
3.5”
MALE X FEMALE NH RIGID ADAPTERS
$50.00
$70.00
$110.00
$135.00
3.0”
$40.00
$70.00
$80.00
$65.00
$115.00
$135.00
$175.00
3.5”
$65.00
$95.00
$75.00
$100.00
$120.00
$140.00
$175.00
4.0”
$55.00
$95.00
$85.00
$85.00
$70.00
$95.00
$100.00
4.5”
$60.00
$110.00
$100.00
$65.00
$95.00
$95.00
$100.00
5.0”
$105.00
$150.00
$90.00
$65.00
$125.00
$100.00
$150.00
$155.00
$110.00
$100.00
$95.00
$90.00
3.0”
4.0”
4.5”
5.0”
6.0”
6.0”
FEMALE 1.0'
1.5”
2.0”
2.5”
1.5”
$25.00
$50.00
$40.00
2.0”
$60.00
$65.00
$70.00
2.5”
$35.00
$80.00
$75.00
$70.00
$80.00
$60.00
$115.00
MALE
1.0”
3.0”
3.5”
MALE X FEMALE SWIVEL ADAPTERS
$115.00
$110.00
$150.00
$190.00
$175.00
3.5”
$110.00
4.0”
$85.00
$175.00
$200.00
$190.00 $180.00
$115.00
$205.00
$240.00
4.5”
$120.00
$180.00
$240.00
$195.00
$195.00
$220.00
$260.00
5.0”
$285.00
$240.00
$260.00
$265.00
6.0”
$300.00
$280.00
$255.00
$235.00
877.699.3473
45
FIRE46 SUPPRESSION |
46 & Wyes Valves
GATED WYES - LIGHTWEIGHT • Lightweight aluminum gated wyes
GATED WYE - NON LOCKING
• 2.5” Female x [2] 1.5” Male Outlets, Lightweight Aluminum LWNL
$225.00
FORESTRY GATED WYES
75014333: 1.5” female inlet x [2] 1.5” male outlets
$295.00
75014433: 2.5” female inlet x [2] 1.5” male outlets
$295.00
75014533: 2.5” female inlet x [2] 2.5” male outlets
$295.00
STORZ GATED WYE
FWNL1000: 1.0” Female Inlet x [2] 1.0” Male Outlets
$195.00
FWNL1510: 1.5” Female Inlet x [2] 1.0” Male Outlets
$195.00
75014833: 4” Storz x [2] 4” Storz
$1,595.00
FWNL1500: 1.5” Female Inlet x [2] 1.5” Male Outlets
$195.00
75014933: 5 Storz x [2] 5” Storz
$1,495.00
STORZ GATED WYE
• 4.0” or 5.0” Storz Inlet x [2] Male 2.5” NH Outlets 75014633: 4” Storz x [2] 2.5” NH Male Outlets
$375.00
75014733: 5” Storz x [2] 2.5” NH Male Outlets
$395.00
2.5” BALL VALVE
• 2.5” Female Inlet x 2.5” Male Outlet CHYV
$375.00
1.5” WATER THIEF •
The Water Thief is a 1.5” x 1.5” x 3/4” Tee connector, for connection at intervals in a 1.5” fire line. The 3/4” outlet allows a 3/4” forestry hose line to be connected for mop-up operations during forest fire. Includes a shut-off valve
4040ASO: 1.5” Water Thief with shut-off valve
46
2.5” BALL VALVE
• 2.5” Female NST Inlet x 2.5” Male NST Outlet $15.00
75035133
www.FireSafetyUSA.com
$205.00
47 Valves & Wyes
STAINLESS STEEL PISTON INTAKE VALVE
HAZ-MAT ADAPTERS
• 6.0” Female NST Inlet x 5.0” Storz Outlet • Call for other sizes 75000745
47 | FIRE SUPPRESSION
$895.00
40H15GG: 1.5” FNST Inlet x [2] MGHT Outlets
$25.00
40H25GG: 2.5” FNST Inlet x [2] MGHT Outlets
$40.00
MEGA FLOW INTAKE VALVE
• 6.0” Female NST Inlet x 5.0” Storz Outlet • Choose Aluminum or Stainless 75011533: Aluminum
$840.00
75012433: Stainless
$975.00
STORZ GATE VALVES
• All Valves come with 4.0” – 6.0” NST Inlet x 4.0” or 5.0” Storz Outlets 12K: Straight Gate Valve
$650.00
11K: Gate Valve With Elbow
$625.00
10K: Gate Valve With Elbow and Relief Valve
$750.00
HYDRANT GATE VALVE
• 2.5” Swivel Female Inlet x 2.5” Male Outlet CHGV
$275.00
BLACK MAX PISTON INTAKE VALVE
• Stainless steel piston housing • 250 PSI operating pressure • Polymer piston for improved corrosion resistance • Pressure relief valve adjustable from 50-250 psi • 10-year warranty 7980
$1,525.00
REVOLUTION INTAKE VALVE
• Swiveling intake elbow with locking pin • Robust, integrated Pyrolite patent- pending handwheel for easy operation • Field adjustable relief valve • 2000gpm max flow • NFPA 1901 compliant
BUTTERFLY VALVE • Availabe in 4” to 6” Lever Handle
$895.00
7983: Straight
$1,450.00
Handwheel
$995.00
7982: Elbow
$1,550.00
877.699.3473
47
FIRE48 SUPPRESSION |
48 Strainers & Nozzles
LOW LEVEL STRAINER
• Quality low level strainers with internal jet siphon LL25: 2.5”
$260.00
LL40: 4.0”
$295.00
LL45: 4.5”
$305.00
LL50: 5.0”
$330.00
MS500: 2.5” Inlet Nozzle for up to 500 GPM
$315.00
LL60: 6.0”
$395.00
MS1250: 2.5” Inlet Nozzle for up to 1250 GPM
$750.00
MASTER STREAM NOZZLE
FLOATING STRAINER
• These floating strainers include a detachable barrel strainer FS25: 2.5”
$205.00
FS40: 4.0”
$415.00
CELLAR NOZZLE
• Features a ball bearing revolving action for fires in hard-to-reach places
FS50: 5.0”
$525.00
536: 1.5”
$450.00
FS60: 6.0”
$560.00
535: 2.5”
$550.00
BARREL STRAINER BS25: 2.5”
$70.00
BS40: 4.0”
$85.00
BS45: 4.5”
$105.00
PCN125: 3’ with 1.5” Inlet
$425.00
BS50: 5.0”
$115.00
308-6: 6’ with 1.5” Inlet
$550.00
BS60: 6.0”
$130.00
2500: with 1.5” Ball Shutoff & Mounting Brackets
$850.00
PIERCING NOZZLE
• 1.5” Inlet x 3’ or 6’ piercing nozzle, ideal for quick penetration
PIERCING APPLICATOR
• 3’ or 6’ piercing applicator • Designed to drive concrete block, cars, mobile homes, etc. • Compatible with Class A and B foams
BASEMENT STRAINER BL25
48
$125.00
1088: 3’
$750.00
1088: 6’
$795.00
www.FireSafetyUSA.com
49 Nozzles
49 | FIRE SUPPRESSION
VIPER BLACK KNIGHT NOZZLE
• 1.5” NST Inlet • Adjustable from wide fog to shut off position • Designed for flows up to 95 GPM Black Knight
$30.00
PLAYPIPE
• 2.5” Inlet x 1.5” Outlet Playpipe with Shut Off
LEXAN NOZZLE
• 1.0” – 2.5” NST or IPT Nozzles 1.0” NST or IPT
$15.00
1.5” NST or IPT
$17.50
2.5” NST
$50.00
BSPP: Playpipe
$425.00
BSPPST2675: with Double Stacked Tips
$535.00
BSPPST312: with Triple Stacked Tips
$600.00
NYLON BALL SHUT OFF
• Features a 1.5” female NST hose thread inlet • Features a 1.5” male NST discharge outlet • Manufacturerd from tough corrosion free glass reinforced nylon 4080A: 1.5”
$75.00
PENETRATOR NOZZLE
• Features a 1.5” female NST hose thread inlet • Features a 1/4” discharge orifice • When connected to the end of a fire hose, it generates a high velocity water jet 4005A: 1.5”
$15.00
BALL SHUTOFF
• Lightweight aluminum body, stainless steel ball • Continuous female inlet swivel with strainer • Available with or without pistol grip
STACKED TIPS ST2675: Double Tip, 1.5” Inlet x 15/16” x 1/2”
$110.00
ST312: Triple Tip, 1.5” Inlet x 1.25” x 1.125” 1.0”
$175.00
DTT12: Triple Deluge Tip, 2.5” inlet x 1.75” x 1.5” x 1-3/8”
$195.00
DTQ17: Quad Deluge Tip, 2.5” x 2” x 1.5” x 1-3/8”
$250.00
BS10: 1.0” Inlet x 1.0”
$170.00
BS10P: 1.0” Inlet x 1.0” with Pistol Grip
$200.00
BS15: 1.5” Inlet x 1.5”
$210.00
BS15P: 1.5” Inlet x 1.5” with Pistol Grip
$235.00
BS2525: 2.5” Inlet x 1.5”
$245.00
BS2525P: 2.5” Inlet x 1.5” with Pistol Grip
$275.00
BALL SHUT OFF WITH TIPS
• Ball Shutoffs with Pistol Grips with added Tips
SMOOTH BORE TIPS SBT45: Smooth Bore Tip, 1.0” Inlet x 3/8” Outlet
$90.00
SBT6100: Smooth Bore Tip, 1.5” Inlet x 1.0” Outlet
$120.00
DT9: Deluge Tip, 2.5” inlet x 1.5” Outlet
$145.00
BS10PSBT45: 1.0” with Pistol Grip and SBT45 Tip
$290.00
BS15PSBT6100: 1.5” with Pistol Grip and SBT6100 Tip
$355.00
BS25PSBT6100 : 2.5” with Pistol Grip and SBT6100 Tip
$395.00
877.699.3473
49
FIRE50 SUPPRESSION |
50 Nozzles
PROVENGER 1” ADJUSTABLE NOZZLE
• Great stream quality • Lightweight fog and straight stream nozzle • Only available with black pistol grip, bale handle and bumper • 5-year warranty • 5-10-20-40 @ 75 PSI 1602: 1.0” Adjustable Nozzle
PROVENGER 1” FIXED NOZZLE
$425.00
PROVENGER 1.5” ADJUSTABLE NOZZLE
• Great stream quality • Lightweight fog and straight stream nozzle • Only available with black pistol grip, bale handle and bumper • 5-year warranty • 30-60-95-125-150 @ 75 PSI 1616: 1.5” Adjustable Nozzle
• Great stream quality • Lightweight fog and straight stream nozzle • Only available with black pistol grip, bale handle and bumper • 5-year warranty • 5-10-20-40 @ 75 PSI 4102: 1.0” Fixed Nozzle
$395.00
PROVENGER 1.5” FIXED NOZZLE
$525.00
• Great stream quality • Lightweight fog and straight stream nozzle • Only available with black pistol grip, bale handle and bumper • 5-year warranty • 60-95-125-150 @ 75 PSI 4116: 1.5” Fixed Nozzle
$525.00
ULTRAJET NOZZLE
• Open/Close bale handle for easy, quick operation • Full grip bumper for excellent operating control at the nozzle • Matching flows in smooth bore and fog • Low pressure operation at 50 PSI • Can be used with CAFS, premixed foam tanks, portable eductors • Optional colored bale handle and pistol grip • NFPA & CE Certified • 10-year warranty 1820: 1.5” DSO Nozzle with Pistol Grip 95 GPM
50
www.FireSafetyUSA.com
$975.00
51 Nozzles
TURBOJET NOZZLE
• A selectable gallonage nozzle flow remains the same in all patterns with multiple flow settings for operator flow control • Black shutoff and pistol grip comes standard, other colors available upon request • Priced with pistol grip, nozzles without pistol grip are also available
51 | FIRE SUPPRESSION
BREAKAPART TURBOJET NOZZLE
• Breakapart Style, Tip and Shutoff • A selectable gallonage nozzle where flow remains the same in all patterns with multiple flow settings for operator flow control • Black shutoff and pistol grip comes standard, other colors available upon request • Priced with pistol grip, nozzles without pistol grip are also available
1702: 1” Inlet Nozzle: 13-25-40-60 GPM
$695.00
1720: 1.5” Inlet Nozzle: 30-60-95-125 GPM
$750.00
1718: 1.5” Inlet Nozzle: 30-60-90-125 GPM
1723: 1.5” Inlet Nozzle: 95-125-150-200 GPM
$870.00
1735: 1.5” Inlet Nozzle: 95-125-150-200 GPM
1733: 2.5” Inlet Nozzle: 125-150-200-250 GPM
$920.00
1736: 2.5” Inlet Nozzle: 125-150-200-250 GPM
$805.00 $915.00 $1005.00
BREAKAPART ASSAULT NOZZLE
ASSAULT NOZZLE
• Assault fire hose nozzles combine quality stream performance at a variety of pressures with the simplicity of a fixed orifice • Black shutoff and pistol grip comes standard, other colors available upon request • Priced with pistol grip, nozzles without pistol grip are also available
• Breakapart Style, Tip and Shutoff • Assault fire hose nozzles combine quality stream performance at a variety of pressures with the simplicity of a fixed orifice • Black shutoff and pistol grip comes standard, other colors available upon request • Priced with pistol grip, nozzles without pistol grip are also available
$615.00
4821: 1.5” Inlet Nozzle: Specify GPM and PSI
$770.00
4820: 1.5” Inlet Nozzle: Specify GPM and PSI
$615.00
4834: 1.5” Inlet Nozzle: Specify GPM and PSI
$875.00
4826: 2.5” Inlet Nozzle: Specify GPM and PSI
$825.00
4836: 2.5” Inlet Nozzle: Specify GPM and PSI
$975.00
4802: 1” Inlet Nozzle: 13, 25, or 40 GPM @ 100 PSI
SABERJET DUAL SHUTOFF NOZZLE
• Patent dual shutoff multi-purpose nozzle • Ability to flow both fog and straight stream at same time • Suitable for multiple applications, making it a truly multi- purpose nozzle • 10-year warranty 1520: 1.5” DSO Nozzle with Pistol Grip 95 GPM
$895.00
SABERJET MID-RANGE NOZZLE
• Patent dual shutoff multi-purpose nozzle • Ability to flow both fog and straight stream at same time • Suitable for multiple applications, making it a truly multi- purpose nozzle • 10-year warranty 1533: 1.5” Nozzle with Pistol Grip 135 GPM
877.699.3473
$825.00
51
FIRE52 SUPPRESSION |
52 Nozzles
SELECTABLE NOZZLE
• Straight stream to wide fog, NFPA 1964 Compliant • Available with or without pistol grip
AUTOMATIC NOZZLE
• Straight stream to wide fog, NFPA 1964 Compliant • Available with or without pistol grip
SF40P: 1.0” Nozzle: 5-10-24-40 GPM
$450.00
SF125P: 1.5” Nozzle: 30-60-95-125 GPM
$450.00
AF125P: 1.5” IWozzle: 10-125 GPM
$545.00
SF200P-15: 1.5” Nozzle: 95-125-150-200 GPM
$525.00
AF200P-15: 1.5” Inlet Nozzle: 70-200 GPM
$595.00
SF200P-25: 2.5” Nozzle: 95-125-150-200 GPM
$525.00
AF350P: 2.5” Inlet Nozzle: 50-350 GPM
$675.00
CONSTANT FLOW NOZZLE
• Straight stream to wide fog, NFPA 1964 Compliant • Available with or without pistol grip
PISTOL GRIP NOZZLE
• 1.5” NST Nozzles • Includes Pistol Grip and Bail Shut Off • Adjusts from straight stream to fog • The nozzle tip can be detached so a foam eductor can be inserted • Designed for up to 70 GPM 4037-70: 1.5” NST Nozzle
$85.00
CF23P: 1.5” Inlet Nozzle: 13/25/40/60 GPM
$460.00
CF95P: 1.5” Inlet Nozzle: 60/95/125 GPM
$460.00
CF200P-15: 1.5” Inlet Nozzle: 150/200/250 GPM
$495.00
CF200P-25: 2.5” Inlet Nozzle: 150/200/250 GPM
$495.00
CF250P: 2.5” Inlet Nozzle: 200/250/300 GPM
$545.00
SELECTABLE & CONSTANT FLOW NOZZLES • Straight stream to wide fog, NFPA 1964 Compliant • Pricing for nozzles with pistol grip and NH threads
TWIST NOZZLE
• 1.0” Inlet for up to 25 GPM • 1.5” Inlet for up to 75 GPM • Choose with or without Pistol Grip • Adjusts from straight stream to fog • Twist shut off design
710: 1.0” Selectable Nozzle: 5-10-24-40 GPM
$400.00
715: 1.5” Selectable Nozzle: 30-60-95-125 GPM
$425.00
725: 2.5” Selectable Nozzle: 95-125-150-200 -250 GPM
$495.00
730: 1” Inlet Nozzle: 13/25/40/60 GPM
$400.00
60688697: 1.0” Nozzle
$110.00
735: 1.5” Inlet Nozzle: 60/95/125 GPM
$400.00
60688797: 1.0” Nozzle with PG
$155.00
740: 1.5” Inlet Nozzle: 150/175/200/250 GPM
$450.00
60688497: 1.5” Nozzle
$110.00
745: 2.5” Inlet Nozzle: 150/175/200/250 GPM
$475.00
60688597: 1.5” Nozzle with PG
$155.00
52
www.FireSafetyUSA.com
53 Monitors
53 | FIRE SUPPRESSION
APOLLO SINGLE INLET PORTABLE AND DECK MONITOR
• 360° rotation when mounted in the deck mode, 180° in the portable mode • Vertical travel from 90° above to 15° below horizontal, with built-in 35° safety stop • 3” waterway with cast-in turning vanes for efficient flow • Direct mount - a combination 3” NPT female and 3” flange • Portable ground base monitor with a single 4”, 4 1/2”, or 5” thread or 4” or 5” storz swivel inlet • Also available as portable only or deck mount only – call for pricing 3416: Without Pipe and Quad Stacked Tips
$2,950.00
3416: With Pipe and Quad Stacked Tips
$2,995.00
Add a 5160 Master Stream Nozzle
$995.00
OZZIE 911 OSCILLATING MONITOR
• Powerful sweeping water stream for high performance attack and protection • Water driven motor sweeps outlet back and forth in smooth, wave-like motion to provide cooling and protection while unmanned • Operates unmanned • Suited for haz-mat situations, protecting exposures, and attacking fires • Adjustable sweeping range 30 degrees either side of center • Vertical travel from 35 degrees to 90 degrees above horizontal • Shown with Style 4827 Nozzle 911: Monitor Only
$2,950.00
Add High Range Assult Nozzle 4827
$525.00
MERCURY QUICK ATTACK MONITOR
• Smallest portable ground monitor • Quick set up and ability to leave unmanned to free up valuable personnel • Rated flows up to 500 gpm • Rotation +/- 20 degrees • Elevation 30 to 60 degrees unmanned, and down to 20 degrees when manned • Shown with Style 4445 Nozzle 3443: Monitor Only
$1,250.00
Add Mercury 500 GPM Fixed Nozzle 4445
$450.00
Add Storage Bracket
$135.00
PORTABLE MONITOR
• 2.5” Inlet portable monitor for up to 500 GPM • 20 degrees of horizontal operation • 30 – 60 degrees of unmanned vertical operation • Comes standard with folding spikes, shutoff, and safety tether • Shown with Master Stream Nozzle MS500 IPM500: Portable Ground Monitor
$1,175.00
IPM500 OSC: Portable Oscillating Ground Monitor
$1,795.00
Add Master Stream Nozzle MS500
$315.00
Add Portable Monitor Mounting Bracket, MP100
$160.00
877.699.3473
53
FIRE54 SUPPRESSION |
54 Wildland
FORESTRY BACKPACK SYSTEM
• Choose the water or foam pump and back pack • Features 2” shoulder straps with 3” shoulder pads • 4000F-BP: Single action pump with a foam educting attachment and air aspirating nozzle • 4000F-BP: Each time the pump is charged, 1% of foam concentrate is educted into the water
BRAVO BACKPACK SYSTEM
• Ultra comfortable method to carry liquids used during fire operations • 6 gallon capacity • Consists of outer, high-visibility yellow, shell with a replaceable inner bladder • Fully padded and adjustable shoulder and sternum straps
4000-BP: Water Backpack System
$145.00
4000-BRAVO: Water Backpack System
$170.00
4000F-BP: Foam Backpack System
$195.00
4000F-BRAVO: Foam Backpack System
$200.00
M2 MESH MASK
PUMP CANS
• Choose vinyl, poly, galvanized or stainless • Smith’s pump will give years of bind free use 179061V: Vinyl 5 Gallon Collapsible Bag
$155.00
190191: Poly 5 Gallon
$145.00
179014-1: Galvanized 5 Gallon Steel
$177.50
179015-17: Stainless 5 Gallon Steel
$252.50
• Mesh Construction – Lightweight - Breathable • 99.9% Replaceable Active Carbon Filters • Dual one-way discharge valves – Reduce condensation • Adjustable nose clip – Prevent fogging • Adjustable Velcro Strap – Universal fit • Versatile - Durable - Washable • Availabe in black, gray, titanium, maroon, forest green, navy, red, safety green, orange, pink, purple and sky blue • Includes mask, two filters and storage bag
179094: Vehicle Carry Rack for Poly Pump
$42.00
M2 Mask
$34.95
179092-0: Vehicle Carry Rack for Steel Pumps
$42.00
F1 Filter
$6.95
54
www.FireSafetyUSA.com
55 Foam
55 | FIRE SUPPRESSION
SILVEX-PLUS CLASS A FOAM • Sold in 5-gallon pails • Shipping weight: 45# SILVEX
$90.00
INLINE FOAM EDUCTOR
• Brass construction • Check ball to prevent backflow • Metering valve with 5 settings: 0 (shutoff)-_-1-3-6% • Detachable metering device for quick and easy cleaning • Rated to flow at 200 PSI ILE095: 1.5” Inlet
ANSULITE 3% - 6% FOAM
• Sold in 5-gallon pails, shipping weight: 45# ANSULITE 3-6%
$450.00
$135.00
THROUGH THE PUMP FOAM SYSTEM
• Educts foam concentrate into hose lines through a pump’s suction and discharge sides, also known as an “Around-The-Pump” system • Will educt concentrates at percentages of 0% to 3.75% at flow rates from 15 to 125 GPM at 100 PSI • Maximum operating pressure of 300 PSI • Includes an 18” Pressure Hose and a 48” Foam Pick-up Hose • 4171-KIT to include one 1-½” Cast Aluminum Connecting Tee and one 2” Cast Aluminum Connecting Tee 4171
$350.00
4171-KIT: Through the Pump Kit
$495.00
ROLL & FOAM SYSTEM
• Self-contained unit • Deployed and spray foam in under a minute • 22 lbs. empty weight • 14 gallon capacity 4045A-30A
$550.00
FOAM APPLICATOR KIT
• End of the Line hose attachment • Fast and easy delivery of Class A or Class B (AFFF) Foams • Standard fixed eduction rates of 1% or 3% (if specified) 4075-50A
$179.95
FOAM PAIL WRENCH • Handy foam pail wrench UFCW
877.699.3473
$13.95
55
56 | TOOLS
Wrenches
56
FOLDING SPANNER WRENCH PSW74Z01Z
$10.00
RES-Q-RENCH
• Spanner wrench for threaded and stoz connections • Integrated seatbelt cutter, window punch, gas shutoff and pry tool SPAN25
$20.00
STORZ HYDRANT & SPANNER SET S-148-3
$130.00
SPANNER WRENCH SET
STORZ HYDRANT WRENCH SW-3
$55.00
STORZ WRENCH
146-2
$70.00
STORZ WRENCH SET
SW-2
$15.95
UNIVERSAL SPANNER WRENCH 101
S-146-2
$60.00
HYDRANT & SPANNER WRENCH SET $15.00
148-3-7
$120.00
SUPER SPANNER/STORZ WRENCH
• Choose a wrench only, or the set with 4 super storz wrenches with a bracket
ADJUSTABLE HYDRANT WRENCH 107: Single Head Hydrant Wrench
$35.00
KS3: Wrench Only
$18.50
105: Double Head Hydrant Wrench
$50.00
KS34: Super Storz Set
$75.00
56
www.FireSafetyUSA.com
57
Pocket Tools
57 | TOOLS
MINI-GOAT POCKET TOOL
• Multi-purpose custom handtool that fits in your pocket • Gas shutoff, multi-step nut wrench, hydrant wrench and spanner wrench MG-100
$24.95
RESQME™ TOOL
• Spring loaded stainless steel window punch and a stainless steel blade seatbelt cutter with keychain clip • Window punch designed for tempered glass windows • Available in red, black, pink, hi-viz yellow, blue and orange RQM100
$9.50
86 CABLE CUTTER & 87 RESCUE TOOL
• Pries open windows and doors, cuts wires and cables easily, shuts off gas safety valves and loosens hose couplings • Fits securely in bunker pockets CHANNELLOCK 86
$47.50
CHANNELLOCK 87
$39.50
FIRE - POWER™ RESCUE TOOL
• Fire - Power™ is a pliers, cutter, gas shut off tool, pry bar, spanner wrench and a seat belt cutter 911-FIRE POWER
$37.95
5-IN-1 LIFESAVER HAMMER
• 5 tools in one • Seatbelt cutter, hammer, needle to deflate airbags, LED light and whistle 7000
$12.95
• Available in green, yellow, orange, brown or black WEDGEIT
$8.50
FAT IVAN
T3 TACTICAL AUTO RESCUE KNIFE
• Folding door stop, works on any door • Fold up to take up less pocket room • Corrosion resistant • Engineered plastic and zinc plated steel • Compact (4” x 2” x 1”), weighing only 5 oz. • Made in the USA
• A spring loaded steel tip window punch • 440C stainless steel hook blade for seatbelt cutting • LED light with replaceable batteries • Stainless steel belt clip & heavy duty nylon sheath • Serrated 440C stainless steel blade • 3 1/4” blade length 48339CS
WEDGE-IT THE ULTIMATE DOOR STOP
$32.50
FAT-IVAN
877.699.3473
$14.00
57
58 | TOOLS
58
Pike Poles
NEW YORK HOOK PIKE POLE WITH SURE GRIP
PIKE POLES PP03: 3’ Pike Pole
$40.00
PP03D: 3’ Pike Pole with D-Handle
$50.00
PP04: 4’ Pike Pole
$45.00
PP04D: 4’ Pike Pole with D-Handle
$55.00
PP06: 6’ Pike Pole
$50.00
PP06D: 6’ Pike Pole with D-Handle
$60.00
PP08: 8’ Pike Pole
$55.00
PP08D: 8’ Pike Pole with D-Handle
$65.00
PP10-PPSLEEVE: 10’ Pike Pole Two Piece
$70.00
PP10D-PPSLEEVE: 10’ Pike Pole with D-Handle Two Piece
$80.00
PP12-PPSLEEVE: 12’ Pike Pole Two Piece
$75.00
PP12D-PPSLEEVE: 12’ with D-Handle Two Piece
$85.00
PP14-PPSLEEVE: 14’ Pike Pole Two Piece
$80.00
PP14D-PPSLEEVE: 14’ with D-Handle Two Piece
$90.00
• Drop-forged hook will not break like cheaper “cast” hooks • Heavy-duty handle constructed with thick wall, carbon steel tube • Reflective striping added to help locate tool in dark areas • All NY Hooks are fabricated with 100% American Steel NYH-2: 2’ NYH Pike Pole
$52.50
NYH-3: 3’ NYH Pike Pole
$57.50
NYH-4: 4’ NYH Pike Pole
$62.50
NYH-5: 5’ NYH Pike Pole
$72.50
NYH-6: 6’ NYH Pike Pole
$80.00
NYH-8: 8’ NYH Pike Pole
$90.00
DRYWALL/CEILING HOOK POLES • Round pike poles with drywall hook end and optional D-Grips DW04: 4’ Pole
$65.00
DW04D: 4’ Pole w/D-Handle
$75.00
DW06: 6’ Pole
$70.00
DW06D: 6’ Pole w/D-Handle
$80.00
DW08: 8’ Pole
$75.00
DW08D: 8’ Pole w/D-Handle
$85.00
ROUND PIKE POLES
• Fiberglass round pike poles • Optional D-Grip • Choose high viz orange, hi viz lime, or yellow handles
TRASH HOOK POLES
• Round pike poles with trash hook poles and optional D-Grips
LH-POLE-3D: 3’ Pike Pole with D-Handle
$45.00
TH04: 4’ Pole
$65.00
LH-POLE-4D: 4’ Pike Pole with D-Handle
$50.00
TH04D: 4’ Pole w/D-Handle
$75.00
LH-POLE-6B: 6’ Pike Pole with butt grip
$50.00
TH06: 6’ Pole
$70.00
LH-POLE-6D: 6’Pike Pole with D-Handle
$65.00
TH06D: 6’ Pole w/D-Handle
$80.00
LH-POLE-8B: 8’ Pike Pole with butt grip
$55.00
TH08: 8’ Pole
$75.00
LH-POLE-8D: 8’ Pike Pole with D-Handle
$65.00
TH08D: 8’ Pole w/D-Handle
$85.00
SALVAGE KIT BPSALVAGE KIT
58
$350.00
www.FireSafetyUSA.com
59
Axes
59 | TOOLS
HALAX MARRYING STRAP
• Connects a Fire Axe with a Hooligan Bar • The adjustable strap can be worn over the shoulder or tightened to be carried HALAX
$40.00
AXE BRACKETS
FORCIBLE ENTRY TOOL KIT
• 6# x 36” long flat head axe with fiberglass handle • 30” hooligan bar • Halax Marrying Strap with Shoulder Carrier HALAX-TOOL-KIT
ZAH5101C: Axe Head Sheath
$22.50
ZSMA5201C: Axe Handle Holder
$17.50
AR164: Axe Pick Guard $205.00
$4.95
9100: Leather Axe Sheath
$35.00
FIRE AXES
FIRE AXES
• Fire axes in pick head or flat head with 36” fiberglass handle • Made in the USA • Choose high viz orange, hi viz lime, or yellow handle
• Pick and Flat Head Axes • Choose Hickory or Fiberglass with Rubber Grip FHA: Flat Head Axe, 6# head x 36” with Rubber Grip
$40.00
LHPA-6: 6# Pick Head Axe
$50.00
PHA: Pick Head Axe, 6# head x 36” with Rubber Grip
$40.00
LHFA-6: 6# Flat Head Axe
$50.00
PUL: Pulaski Axe, 4# head x 36” with Rubber Grip
$40.00
LHPA-8: 8# Pick Head Axe
$105.00
PHAH6LB: Pick Head Axe, 6”, 36” Hickory Handle
$40.00
LHFA-8: 8# Flat Head Axe
$105.00
FHAH6LB: Flat Head Axe, 6”, 36” Hickory Handle
$45.00
AXE HANGER KIT
• Axe Kit includes head holder and #1004 handle holder
T-N-T TOOL
• The T-N-T Tool is an axe, a pry-bar, sledge hammer, and a pike pole all in one • 6.5 Head x 35” Long TNT-TN635
$205.00
K5011: Flat Head Axe Hanger Kit
$110.00
K5012: Pick Head Axe Hanger Kit
$140.00
1011: Flat Head Axe Head Hanger Only
$75.00
1012: Pick Head Axe Head Hanger Only
$105.00
877.699.3473
59
60 | TOOLS
Wildland & Forcible 60 Entry
HEAVY DUTY BOLT CUTTERS
• Heavy Duty bolt cutters • Brackets are designed for 18” - 36” bolt cutters • Utility straps hold the bolt cutter handles • A fixed strap and a variable strap included with each bracket
FIRE BROOM
BC18: 18” Heavy Duty Bolt Cutters
$35.00
1304-1: Individual Broom
$19.00
BC24: 24” Heavy Duty Bolt Cutters
$45.00
1304: Case of 12 Brooms
$215.00
BC36: 36” Heavy Duty Bolt Cutters
$70.00
$24.95
BC42: 42” Heavy Duty Bolt Cutters
$80.00
BCB: Bolt Cutter Bracket Set
$70.00
1368-1: Chisel Broom 1368: Case of 12 Chisels
$249.95
FORGED HALLIGAN BAR FIRE RAKE FR
$45.00
LB-24: 24” Standard Bar
$210.00
LB-30: 30” Standard Bar
$210.00
LB-36: 36” Standard Bar
$210.00
SWATTER SWATTER
$46.50
HALLIGAN BAR MCCLEOD TOOL MT
$55.00
HALLIGAN-24: 24” Standard Bar
$115.00
HALLIGAN-30: 30” Standard Bar
$125.00
HALLIGAN-36: 36” Standard Bar
$135.00
22-000605: Set of Two Mounting Brackets
SLEDGEHAMMER
$70.00
FUBAR TOOL
SH08: 8# Sledge Hammer with 36” Handle
$40.00
55-099: 18” Fubar Tool
$42.50
SH10: 10# Sledge Hammer with 36” Handle
$45.00
55-120: 30” Fubar Tool
$100.00
60
www.FireSafetyUSA.com
61 1003
Brackets
61 | TOOLS
1004
1070
QUICK FIST CLAMP
MINI CLAMP
NOZZLE CLAMP
SUPER CLAMP
1019 1009 1002
QUICK FIST CLAMPS
• Ideal for mounting your axes and other tools! • Assortment Pack includes: (8) Mini Quick Fist Clamps, (20) Quick Fist Clamps, (6) Super Quick Fist Clamps, (4) Nozzle Quick Fist Clamps, and (4) Long Arm Quick Fist Clamps
TOOL MOUNTING BRACKETS
1002-2
• Ideal for mounting your axes and other tools!
10011: Clamp - Grip range 1” to 2.25” 10011-24: 24-Pack of the Clamps
1003: Grip range from 1/8” to 1.50”
$22.50
30052: 2-Pack of Mini Clamp - 5/8” to 1 3/8” Grip
1004: Grip range from 1/8” to 1.75”
$37.50
30052-24: 24-Pack of Mini Clamps
1070: Grip range from .375” to 3.25”
$65.00
50052: Nozzle Clamp - Grip range 2 3/4” to 3 1/4”
1019: Universal Hanger
$18.00
50052-12: 12-Pack of Nozzle Clamps
1009: Tool Hanger
$35.00
20022: Super Clamp - Grip range 2.5” to 9.5”
1002: Grip range from 1.75” to 2.50”
$32.00
20022-12: 12-Pack of Super Clamps
1002-2: Grip range from 1.75” to 2.50”
$32.00
90099: Assortment Pack
$3.75 $79.95 $7.99 $57.99 $9.95 $99.95 $9.95 $99.95 $175.99
VM-5-V
TOOL BRACKETS
VM-5 • Brackets Adjust From 1.0” - 1.3” • VM-5-V: Vertical Bracket • VM-5: Horizontal Bracket • Powder coated aluminum brackets with durable flexible draw latches hold the tools firmly • The latches are UV stabilized material for long life • Sold Individually
PIKE POLE BRACKETS • Sold Individually
VM-5-V
$22.00
FBP58Z01C: Horizontal
$20.00
VM-5
$20.00
SMP59Z01C: Vertical
$20.00
877.699.3473
61
62 | TOOLS
62
Saws
SVC4 POWER PRO CUTOFF SAW
• The SVC4 is an update to the popular SVC3. A smaller and lighter design improves mobility and the Dolmar 2 stroke engine turns the same 14” diamond blade cutting wheel at 500 more RPM These high performance saws are designed for the fire and rescue service and proves to cut through concrete, asphalt, stone, and more with ease • Kit includes: Tiger Tooth blade installed and 1 spare tooth blade, safety glasses, ear plugs, 2 cycle oil, gas can,and treadplate storage box • Engine Displacement - 60.7 cc Power - 4.3 BHP - 3.2 kw HxWxD - 15.25” x 30” x 11” Blade Diameter - 14” (355mm) Arbor - 3/4” (20mm) RPM - 9850 Weight - 19.6 lbs (9 kg) Cutting Depth - 5.1” SVC4-14: 14” Cut-Off Saw
$1,595.00
SVC4-14-KIT-AL: Saw with Kit
$2,150.00
K12FD SAW
The K12FD saw was designed to satisfy every demand made by the Fire Service for a multi-purpose rescue saw. Power, light weight, perfect ergonomics in a compact package, combined with the latest technological advances, including a decompression valve that reduces starter “pull force” by 50% result in a saw that is safe and easy to carry, start and use by both male and female emergency service personnel
K12FD KIT
Includes: • K-12 FD 14” fire rescue saw • Full size steel case • Fire-department carbide tipped blade • Two rescue abrasice wheels • Safety gas can • Hearing protectors • Goggles
• • • • • •
Spare belt and air ilter Air filter oil 2-cycle engine oil Can of gasoline stabilizer Combination screwdriver/ wrench Instruction manual
K12FD94: Saw Only
$1,495.00
K12FD-STDK12FDF: Saw with Kit
$2,195.00
ABRASIVE BLADE: Steel and Concrete Universal Blade, #T1410
$30.00
TIGER TOOTH: 14” Universal “cuts all materials” blade, #164584
$195.00
PIRAYA: Diamond Universal “cuts all materials” blade, #PIRA-14FD
$240.00
WARTHOG: Diamond blade for roofs, walls, floors and siding: #WARTHOG
$275.00
FIRE RESCUE SAW FIRE RESCUE SAW
• The perfect solution for your rescue saw needs • Comes complete with a full safety depth gauge, a carbide chisel chain, and a powerful Shindiawa 757 engine
• Pound for pound, the most powerful & dependable saw • Raptor Multi-Cut Carbide Chain cuts through wood framing, asphalt shingles,metal roofs, doors & even trees. • Patented KIS-40 Adjustable Depth Gauge System precisely controlsthe depth of cut, reduces user fatigue and protects the operator
SV3-16: 16” Rescue Saw
$2,125.00
TV400-051: 16” Ventmaster Saw
$1,995.00
SV3-20: 20” Rescue Saw
$2,175.00
TV400-050: 20” Ventmaster Saw
$2,025.00
62
www.FireSafetyUSA.com
63
Extrication
SOLD IN PAIRS!
AUTO CRIB
• Auto Crib Kit, sold in Pairs • Piston-actuated for stabilizing vehicles in seconds • Automatically re-adjusts and locks during operations • The AC17 is taller and wider for SUV’s and Light Trucks • Super compact for great storage • Lightweight and high strength aluminum. • AC14 is 14.5 pounds, AC17 is 23.5 pounds • AC14 rated for 2,000# max load, AC17 rated for 2800# AUTO-CRIB-IT-AC14: Gold AUTO-CRIB-IT-AC17: Red
$975.00 $1,175.00
63 | TOOLS
HYDRA RAM
• Powerful lightweight, and completely dependable • While others take 30 to 40 pumps to gain full extension, the HYDRA-RAM does it in 8 • Delivering maximum thrust opening: Hydra Ram I: 4” - 13” long / 11 lbs Hydra Ram II: 6” - 15” long / 13 lbs • Includes 2 lb. mallet and carry case HR-1: Hydra Ram I
$1,695.00
HR-2: Hydra Ram II
$1,995.00
LIFESAVER PLUS SEAT BELT CUTTER • 4 blade cartridge housed inside body of cutter • Built in O2 wrench 4002
$9.95
4003: Replacement Cartridge
$6.50
RHYNO 2 WINDSHIELD CUTTER KIT
• Only tool that allows you to remove a windshield in under a minute without disturbing the patient or causing harm to the user • Can be used with one hand for roll-over situations and the steel blades can safely touch skin without the risk of laceration • Unique design brings glass dust out of the vehicle so that it settles on the windshield instead of falling into the vehicle or becoming airborne • Includes: Rhyno 2 Cutter, 2 Lithium Ion Batteries, 30 Minute Fast Charger, (2) Suction Lifters, Cutter Blade Wrench, Mini Halligan Bar, Carrying Case, and Users Manual
GLAS-MASTER
• Fast and effective glass cutting tool • Comes with a window punch, and front guard
RHYNO2
$750.00
GMM-2: Glas-Master Tool
RHYNO2-HARD CASE
$850.00
Replacement Blade
877.699.3473
$182.50 $28.50
63
64 | TOOLS
64 Fans & Keiser Machine
BATFAN: COMPACT PPV FAN WITH BATTERY
• • • • • • • •
TECH SERIES VS-1
• Battery driven • Ergonomic frame design • 70 minute operating time with lithium-ion battery • 48 lbs including battery • Includes fan, one battery and one charger 910-1820
$3,775.00
Powerful and lightweight for completely self-contained operation Powered by NiMH battery, the BATfan can be recharged while in use as an electric fan Available in two versions: BATFAN-20 with a 20 minute runtime and weight of 50 lbs BATFAN-45 with a 45 minute runtime and weight of 60 lbs Faster deployment, ergonomic, reliable, compact, water resistant, emission-free Compact - Two fans fit into the space of one comparable PPV Open air flow: 24 050 m3/h Variable speed Tilt is adjustable from -10° to +30° due to locking system with angle indicator
BATFAN-20
$3,650.00
BATFAN-45
$3,990.00
ELECTRIC PPV FAN
• Full wraparound protective chassis • Automatic tilting to 10° (Maximum 20°) • Reinforced impellers
KEISER FORCE MACHINE
• The Keiser FORCE Machine is a simulated forcible entry chopping device developed and manufactured by Keiser Corporation specifically for the fire service. It provides an efficient and durable means of training or testing individuals such as firefighters who use axes and sledgehammers in their occupation • Dimensions Height: 13” Width: 36.5” Length: 96” Total Weight: 384 lbs I-beam Weight: 158 lbs Platform Height: 9” • Sledgehammer sold separately 006070: Keiser Force Machine
$2,900.00
605400: Keiser Sledgehammer
$175.00
64
EDS230: 18” Single Speed 16,921 CFM
$1,975.00
EVG230: 18” Variable Speed 17,009 CFM
$2,495.00
GAS PPV FAN
• Compact and lightweight: 44.7 lbs • Positioning from 3 ft to 20 ft • Precise tilt adjustment from -10° to +20° MT215L: 16,950 CFM
www.FireSafetyUSA.com
$1,950.00
65
Fans & Blowers
65 | TOOLS
ELECTRIC PPV FAN
GAS PPV FAN
716E2: 16”
$1,595.00 $1,995.00
716G4-H: 16” Honda
$1,950.00
716VR2: 16” Variable Speed
718G4-B 18” Briggs
$1,795.00
718E2: 18”
$1,825.00
718G4-H: 18” Honda
$2,195.00
718VR2: 18” Variable Speed
$2,295.00
720G4-B: 20” Briggs
$1,925.00
720E2: 20”
$1,925.00
720G4-H: 20” Honda
$2,275.00
720VR2: 20” Variable Speed
$2,395.00
724G4-B: 24” Briggs
$2,325.00
724E2: 24”
$2,125.00
724G4-H: 24” Honda
$2,825.00
724VR2: 24” Variable Speed
$2,595.00
VARIABLE SPEED ELECTRIC FANS EB-16: 16”
$1,595.00
EB-16VSM: 16” Variable Speed
$1,995.00
EB-18: 18”
$1,795.00
EB-18VSM: 18” Variable Speed
$2,095.00
EB-21: 21”
$1,895.00
EB-21VSM: 21” Variable Speed
$2,195.00
EB-24: 24”
$1,995.00
DOOR BAR AND HANGER KITS
• Our Door Bar allows you to hang a fan with hangers, in any doorway at the height you choose. It weighs only thirteen pounds, it’s extremely easy to install, and it releases instantly with a handy trigger • These hangers allow you to put your fan almost anywhere; on doors, ladders, window, casements, archways, etc. Used in conjunction with the Door Bar, they permit placing at any height DOOR-BAR
$205.00
HR: Hanger Set
$110.00
GAS PPV FANS AXIAL CONFINED SPACE BLOWERS • • • • •
8” axial blower is an all-in-one ventilation system Includes blower, built in storage canister, and ducting Choose 15’ or 25’ of ducting Available in AC or DC Also available with new Plastic COM-PAX-AIL Blower
DD-16-H: 16” Honda
$1,750.00
DD-16-B: 16” Briggs
$1,475.00
DD-18-H: 18” Honda
$1,975.00
DD-18-B: 18” Briggs
$1,750.00
DD-21-H: 21” Honda
$2,050.00
9533-25: Plastic AX Axial Blower, 25’ Ducting
$305.00
DD-21-B: 21” Briggs
$1,775.00
9514-25: AC Axial Blower, 25’ Ducting
$575.00
DD-24-H: 24” Honda
$2,150.00
9506-25: DC Axial Blower, 25’ Ducting
$575.00
DD-24-B: 24” Briggs
$2,025.00
877.699.3473
65
66 | TOOLS
66
Ladders
300lb Duty Rated
750lb Duty Rated
EXTENSION LADDERS 1000-A: 16’ Two Section
$450.00
900-A: 20’ Two Section
$525.00
900-A: 24’ Two Section
$585.00
1200-A: 28’ Two Section
$725.00
1200-A: 30’ Two Section
$815.00
1200-A: 35’ Two Section
$915.00
1225-A: 28’ Three Section
$825.00
1225-A: 30’ Three Section
$895.00
1225-A: 35’ Three Section
$975.00
750lb Duty Rated
ROOF LADDERS
ATTIC LADDERS 585-A: 8’ Attic Ladder
$165.00
775-A: 10’ Roof Ladder
$225.00
585-A: 9’ Attic Ladder
$185.00
775-A: 12’ Roof Ladder
$250.00
585-A: 10’ Attic Ladder
$195.00
775-A: 14’ Roof Ladder
$275.00
585-A: 12’ Attic Ladder
$215.00
585-A : 14’ Attic Ladder
$230.00
LADDER SYSTEM TYPE 1 10101LG: 13’ Extension
$295.00
10102LG: 17’ Extension
$295.00
10103LG: 22’ Extension
$295.00
10126LG: 26’ Extension
$350.00
15187-882: 17’ Extension
$485.99
$35.00
15182-882: 22’ Extension
$553.99
10104: Work Platform
DEFENDER™
POMPIER LADDER BELT
• Available in Small-2XL, add $10.00 for 2XL 531: Ladder Belt
$180.00
531-18: Ladder with 18” Extension
$195.00
COMBINATION LADDER
• 8ft. Step ladder, also works as a 12’ Extension ladder • Wide steps for more comfortable climbing and standing • Weight 24lbs 12ES
LADDER BOOTS
• Dense Padding, Quick Disconnect buckles • Reflective “KEEP BACK” Print • 1000 Denier Nylon, Gold with Red Printing FB901: 24" x 9" x 8"
66
$55.00
www.FireSafetyUSA.com
$275.00
67 & Salvage Covers Folding Tanks
67 | TOOLS
HALL RUNNERS STEEL AND ALUMINUM FOLDING TANKS
• Call for pricing on hypalon liners, Patch Kits also available STEEL FRAME
ALUMINUM FRAME
• Double stitched and triple reinforced • Lightweight 10oz or stronger 18oz Vinyl • Available in Yellow, Red, or Green HR3X8-10: 10oz 3’ x 8’ Hall Runner
$20.00 $23.00
1,500 Gal
$625.00
1,500 Gal
$850.00
HR3X10-10: 10oz 3’ x 10’ Hall Runner
2,100 Gal
$715.00
2,100 Gal
$950.00
HR3X12-10: 10oz 3’ x 12’ Hall Runner
$27.00 $30.00 $33.00
2,500 Gal
$850.00
2,500 Gal
$1,050.00
HR3X18-10: 10oz 3’ x 18’ Hall Runner
3,000 Gal
$950.00
3,000 Gal
$1,150.00
HR3X20-10: 10oz 3’ x 20’ Hall Runner
3,500 Gal
$1,000.00
3,500 Gal
$1,250.00
HR3X8-18: 18oz 3’ x 8’ Hall Runner
$23.00
HR3X10-18: 18oz 3’ x 10’ Hall Runner
$25.00
HR3X12-18: 18oz 3’ x 12’ Hall Runner
$30.00
REPLACEMENT LINERS
• Replacement 22oz. Vinyl folding tank liners • All liners come standard with patented “Easy Lift Handles” • Call for pricing on Exlon Replacement Liners RL-1000: 1,000 Gallon Liner
$350.00
RL-1500: 1,500 Gallon Liner
$415.00
RL-2100: 2,100 Gallon Liner
$495.00
RL-2500: 2,500 Gallon Liner
$550.00
RL-3000: 3,000 Gallon Liner
$595.00
RL-3500: 3,500 Gallon Liner
$695.00
SALVAGE COVERS
• Lightweight 10oz or stronger 18oz salvage covers • Sizes: 9’ x 12’, 12’ x 14’, 14’ x 18’, available in red or yellow • Call for pricing on custom sizes SC9X12-10: 10oz 9’ x 12’ Salvage Cover
$65.00
SC12X14-10: 10oz 12’ x 14’ Salvage Cover
$85.00
SC14X18-10: 10oz 14’ x 18’ Salvage Cover
$125.00
SC9X12-18: 18oz 9’ x 12’ Salvage Cover
$75.00
HR3X18-18: 18oz 3’ x 18’ Hall Runner
$40.00
HR3X20-18: 18oz 3’ x 20’ Hall Runner
$42.00
SUPPLY LINE HOLDERS
• Frees up manpower for other important duties • Choose from single or double holders • Choose from 1.5”, 2.5” or 3.0” SLB-1.5: 1.5” Single Supply Line Holders
$240.00
SLHS25: 2.5” Single Supply Line Holders
$205.00
SLHS30: 3.0” Single Supply Line Holders
$250.00
SLHD25: 2.5” Double Supply Line Holders
$275.00
SLHD30: 3.0” Double Supply Line Holders
$285.00
SKINNY® TANKS
• Folding frame tank with a narrow design • Great option for areas with limited spaces or between standing structures • Standard Dimensions: Open Dimensions: 8’ x 14’ x 29” Folded Dimensions: 14’ x 7” x 29” • Steel Frame - 159 lbs, Aluminum Frame - 129 lbs • Call for pricing on custom sizes
SC12X14-18: 18oz 12’ x 14’ Salvage Cover
$105.00
STFST-2000: Steel Frame
$1,295.00
SC14X18-18: 18oz 14’ x 18’ Salvage Cover
$160.00
ALFST-2000: Aluminum Frame
$1,750.00
877.699.3473
67
68 | RESCUE
Ice & Water
68
SAR FLOTATION VEST
• Search and Rescue Vest • Designed for comfort and ventilation • Features two front pockets with Velcro closure • Available in Small – 3XL I426
VR2™ RESCUE VEST
• Universal size with adjustable straps • Designed for swift water rescue operations $80.00
I652
$195.00
ICE RESCUE SUIT
• One-piece suit of 100% closed-cell neoprene • Provides optimum buoyancy and insulation • Features face seal and flap, attached gloves, waterproof zipper & sealed seams • Reinforced knees and elbows, integral chest harness with stainless steel D-rings front and back • Features SOLAS-grade reflective panels front and back, individual bag for storage and thick soled boot with tread for sure footing I595: Adult Universal
68
$525.00
ICE RESCUE SUIT
• Rescue professionals need gear that allows them to respond safely and quickly to emergency situations • Engineered to don quickly • Features a rugged hi-tenacity nylon shell • A snap out, internal laminated nylon/foam liner RS-1000: Adult Universal
www.FireSafetyUSA.com
$525.00
69
Ice & Water
69 | RESCUE
WATER RESCUE HELMET
• Ratchet-adjust DialFit system • Plush FIT pads that are fixed so they won’t get lost • 10 ventilation/drain holes • Meets CE 1385 standards for whitewater safety • Colors: Red, Yellow, Black, White, Blue
NEBULUS EMERGECY FLOTATION DEVICE
208420424: Red
$45.00
208420422: Yellow
$45.00
208420429: White
$45.00
208420421: Black
$45.00
208420426: Blue
$45.00
PICK-OF-LIFE ICE AWLS
• Compact, portable life-saving tool • Small and light enough to carry • Fully inflated, it can support up to three adults • The Nebulus Trainer is a manually inflatable version NEBULUS
$425.00
NEBULUS TRAINER
$240.00
208422459
$20.00
ICE COMMANDER PRO SUIT
ICE COMMANDER SUIT
• The universally sized cold water and ice rescue suit can be donned quickly and offers versatility to respond to different rescue scenarios • Water-tight Hood & Face Seal Features SOLAS reflective tape and Velcro™ patch for light attachment • Heavy Duty Zipper Flexible full-length zipper provides a water-tight seal • Welded Nylon Outer Shell Provides waterproofness and durability. High performance urethane- coated nylon exterior makes cleaning and repairs easier • Ergonomic Ice Awl Pockets Sleeve pockets customized to attach and stow ice awls. Pockets easily secured with Velcro™ (Ice awls not included) • Detachable Inner Buoyancy Liner Constructed of closed cell AirSoft™ foam for maximum flotation and thermal insulation. Liner can be unsnapped and removed for cleaning and in-the-field repairs • Knees are reinforced and padded with 2.5 mm neoprene. Seat and elbows are reinforced with shell fabric • Height: 4’ 11” - 6’ 7” • Mass: 110 - 330lbs. • Size: Universal Adult IC9001-3
• Pick-of-Life awls are for self-rescue, allowing you to crawl on top of the ice using the picks as traction. You can also slide them to someone who has fallen through the ice
• The IC9002 is a modular suit made of a durable urethane- coated nylon shell and a removable buoyancy liner that also provides thermal protection • Along with the integrated boots and gloves, the extended torso and covered diagonal entry zipper allow for quick donning while creating additional flexibility for the rescuer • Multi-point adjustment straps on the wrist, torso and legs and an adjustment zipper on the back of the hood create a near custom fit • Neoprene face guard reduces risk of water entry - can be folded back and over itself and out of the way • Fast tab for easy attachment of accessories like a knife or strobe light • Detachable Inner Buoyancy Liner Constructed of closed-cell AirSoft™ foam for maximum flotation and thermal insulation. Liner can be unsnapped and removed for cleaning and in-the-field repairs • Knees are reinforced and padded with 2.5 mm neoprene. Seat and elbows are reinforced with shell fabric • Height: 4’ 11” - 6’ 7” • Mass: 110 - 330lbs. • Size: Universal Adult $750.00
IC9002
877.699.3473
$1,025.00
69
70 | RESCUE
Carabiners
70
ALUMINUM LOCKING CARABINERS • UL Classified to NFPA 1983
300161: Screw-Lock, Silver, 1.0” Opening
$25.00
300165: Screw-Lock, Black, 1.0” Opening
$25.00
300169: Screw-Lock, Orange, 1.0” Opening
$25.00
• The Most Advanced General-Use Rescue Carabiner • Red, Auto-locking, 1.1” gate opening 300233
$32.00
XL STEEL-LOCKING CARABINER
ALUMINUM OVAL CARABINER
• Made out of 1/2” diameter heat-treated steel stock • UL Classified to NFPA 1983
• CMC Non-Locking Carabiners 300081
PROSERIES AUTO-LOCKING CARABINER
$18.00
371290: 1.53” Opening
$42.00
STAINLESS STEEL CARABINER
• Made of 100% stainless steel, including internal parts such as pins and springs, this carabiner is compact enough to operate easily with one hand and has a side-swing gate • The key-lock design eliminates snagging, and the three-stage auto-locking gate has a visual locking indicator • The only stainless carabiner with the highest NFPA strength rating • 1.05” gate opening • 9,891 lbs, 3.6” in length 300010
$56.00
HMS JAKE CARABINERS
• Designed to make belaying single-person loads with a Munter hitch easier and more efficient • 1” gate opening 370070: Screw-Lock
$18.00
370073: Quick-Lock
$22.00
370075: Auto-Lock
$25.00
ESCAPE ARTIST
The Escape Artist uses a wrap-and-a-half of the ropearound the cam to activate the auto-locking function. This simple, patented design provides foolproof activation while limiting the forces on the rope in the event of a fall, increasing safety. The cam has been updated with a new flange that extends a full 270° around the circumference, providing better rope guidance and optimizing the design for use with either escape cord or our new FR Escape Web. • Constructed of aluminum and stainless steel • Compact and lightweight, Only 6.5 oz 300913
70
$149.00
FLASHLITE HOOK
• Delivering outstanding strength with minimal weight, the innovative new CMC Rescue FlashLite Hook escape anchor is the lightest Escape Use-certified model available. The hook’s ergonomic design and narrow width, just .375” wide, offers the slimmest profile possible. Like the original Flash Hook, its distinct patented shape allows firm, full-hand grip on top for rapid deployment and placement, and when loaded, directs the spine toward flat surfaces for a sturdy attachment on structural lumber and window ledges 300981
www.FireSafetyUSA.com
$109.00
71Rope & Webbing
LIFELINE RESCUE ROPE
71 | RESCUE
NEW ENGLAND ROPE KMIII
• UL Classified to NFPA 1983 • 100% Nylon Construction • Made in the USA • Sold by the foot
• A superior handling rescue rope • 100% Nylon core, 100% high-tenacity polyester sheath • UL Classified to NFPA 1983 • Made in the USA • Sold by the foot
272450: 3/8” Black
$1.25
272810: 7/16” Orange
$1.40
272830: 7/16” Red
$1.40
K00120: 3/8” White/Blue
272850: 7/16” Black
$1.40
K05120: 3/8” Orange/Blue
$1.25
263200: 1/2” White
$1.40
K00160: 1/2” White/Blue
$1.40
273210: 1/2” Orange
$1.61
K01160: 1/2” Red/White
$1.61
273220: 1/2” Blue
$1.61
K02160: 1/2” Safety Green/Blue
$1.61
273230: 1/2” Red
$1.61
K03160: 1/2” Blue/White
$1.61
273250: 1/2” Black
$1.61
K04160: 1/2” Black
$1.61
273270: 1/2” Yellow
$1.61
K05160: 1/2” Orange/Blue
$1.61
WATER THROWLINE ROPE
• UL Classified to NFPA 1983 for floating water rescue throwline • Bright Yellow color is highly visible • Sold per foot • MBS of 4,946 lbs 293387: 5/16” Yellow
$1.16
$1.04
100’ WATER RESCUE THROW BAG
• Nylon throw bag with a drawstring closure and 100’ or 50’ of 3/8”floating rope THROW-BAG-50: RED
$30.00
THROW-BAG-100: YELLOW
$45.00
TUBULAR WEBBING
• 1.0” Tubular Mil-Spec Nylon Webbing • Strength 4,000 lbs • Sold by the foot
ROPE BAGS
• Rope bags with web handles
200101: 1.0” Orange
$.49 200105: 1.0” Black
$.49
234: Small, Holds 150’ of 3/8” or 80’ of 1/2” rope
$20.00
200102: 1.0” Blue
$.49 200106: 1.0” Green
$.49
235: Medium, Holds 250’ of 1/2” rope
$27.50
200103: 1.0” Red
$.49 200107: 1.0” Yellow
$.49
236: Large, Holds 500’ of 5/8” rope
$35.00
877.699.3473
71
72 | RESCUE
72 Anchor Straps & Pulleys
PMP SWIVEL PULLEY
ANCHOR STRAP SLEEVE
• Protect anchor straps from the elements and surface abrasion, reducing wear and tear and increasing safety and service life 294032: Small, 2 ft
$38.00
294033: Medium, 4 ft
$44.00
294034: Large, 6 ft
$46.00
• Our new Prusik-minding pulley (PMP) is ideal for high anchor points or tripod use. The rotating swivel aligns the rope with the direction of the pull. Its stainless steel sheave can be used with either rescue rope or wire cable. By combining the swivel with the pulley, overall system length is minimized, increasing travel. The patented pivoting side plate allows the rope to be quickly inserted. Sheave tread size: 1.5” x 1/2” 300430
$145.00
SWIVEL DOUBLE PULLEY
• The swivel double pulley features aluminum sheaves and a becket • Sheave tread size: 1.5” x 1/2” 300432
$161.00
ANCHOR STRAPS
• Anchor straps have a tough job, and see a lot of wear and tear. Over the years, we’ve learned that cuts and abrasion are the greatest threats to their safety and service life. To dramatically increase both, our Anchor Straps now feature two layers of the same durable mil-spec nylon web. Sewn at CMC by the highly skilled workers who make our rescue harnesses, our Anchor Straps feature forged steel D-rings individually proof loaded and sized for easy choker (girth- hitch) configuration when desired 201023: Medium, 5ft
$55.00
201024: Large, 7ft
$57.00
201025: XL, 10ft
$62.00
PULLEY
• This lightweight, full-strength, Prusik-minding pulley is ideal for mountain rescue, swiftwater, or other technical teams where equipment weight is a significant consideration • UL Classified to NFPA 1983 300301
$70.00
MPD CSR2 PULLEY SYSTEM
• The patented locking mechanism in our updated CSR2 Pulley is easy to release under load, creating much greater efficiency with the lowering and raising necessary to a confined space rescue. The machined aluminum swivels at both ends of the system eliminate any potential twisting of the lines. This system is also an excellent choice for confined space entry or rope access work where a heavy-duty pulley system is desired 500102: 1/2”
$1,480.00
500103: 7/16”
$1,440.00
72
• Go from Lowering to Raising without changing hardware • A variable-friction descent control device for rescuesystems and rappels • Incorporates high efficiency pulley with an integral rope- locking mechanism (ratchet) for a haul system • The built-in becket allows cleaner rigging • The MPD allows main line and belay line rigging to be mirror images of one another • One device functions as both a lowering brake and as a ratcheting pulley for raising • Converts rapidly to a retrieval line • Meets BCCTR Rescue Belay Competency Criteria 333000
www.FireSafetyUSA.com
$735.00
73
Helmets
73 | RESCUE
SUPER PLASMA RESCUE HELMET
• Specifically designed for professional rescue and work-at-height applications. Lightweight, compact, comfortable and well-ventilated with 10 air intakes. Outer shell is made of high-density ABS plastic and designed to withstand significant impact from above or the side. Four fastening points of the chinstrap are designed to decrease the risk of helmet loss in case of an impact during a fall (breaking strength of more than 50 daN or 112.4 lbf.) 346200: White
$135.00
346201: Orange
$135.00
346202: Blue
$135.00
346203: Red
$135.00
346207: Yellow
$135.00
SAR RISK HELMET PETZL VERTEX VENT HELMET
• This helmet’s unique vent system closes with sliding shutters. Its strap and suspension system increases helmet retention during falls and has multiple adjustments to provide the most comfortable fit. Industrial helmet-type side slots allow mounting of face shields or hearing protection. The polycarbonate shell has integral headlamp clips and curves over the ears to accommodate hearing protection 345113: Red
$115.00
345110: White
$115.00
• The Leader Sar All-Risk Helmet is suitable for many applications, has the highest protection level, and complies with 11 standards. NFPA certified for USAR and Surface Water Operations • Applications include: • Search and rescue / Confined Space / CBRN environments • Water rescue / Swift Water / Marine / Ribs / Hovercraft • Forestry firefighting • Ambulance / E.M.S • Wildland firefighting / General area search • Technical Rescue / Assistance • Available in Hi-Vis Orange H20-60
$190.00
USRX RESCUE HELMET
ADVENT EMS/SAR RESCUE HELMET
• Designed for rescue and emergency medical operations • A1 features a two point chin strap with quick release • A2 features a three point cradle chin strap • Available in red, white, blue, yellow or orange A1
$90.00
A2
$110.00
• USRX thermoplastic rescue helmets are engineered Bullard Tough for extreme search and rescue conditions • High-heat thermoplastic outer shell • Comfortable Sure-Lock ratchet headband • Balanced 4-point nylon crown straps • 3-point chinstrap with quick-release buckle • Rip-stop Nomex ear/neck protector • Leather ratchet cover • Removable fire-resistant, absorbent cotton brow pad • Certified to NFPA 1971, 2007 and NFPA 1951-2007 standard • Comes with Goggles • Available in red, white, blue, yellow or orange USRX: with Quick-Attach Goggle
877.699.3473
$160.00
73
74 | RESCUE
Harnesses
74
FIRE RESCUE HARNESS
• Two Front D-Rings • Upper Back D-Ring • Quick connect leg buckles • Small/Medium: 28” - 34” Waist • Large/XL: 34” - 46” Waist 202822: Small/Medium
$425.00
202824: Large/XL
$425.00
RESPONSE HARNESS
• Quick to don and fast to adjust • Anatomic waist belt and leg pads feature air channels and breathable fabric • Braided gear loops offer ideal access and gear management • Contrasting web thread color aids in inspection • Front lift assembly accepts connector for adding a chest ascender • Quick-connect buckles are secure, simple to adjust, and cannot open while loaded • UL Classified NFPA, Class III Harness and ANSI Z359.11 • Integrated Fall-Arrest Indicator 202812: Small (26” - 32” waist)
$450.00
202814: Medium (32” - 42” waist)
$450.00
202815: Large (42” - 48” waist)
$450.00
CONFINED SPACE HARNESS
• Designed for confined space, rope rescue, work at height, and rappelling • Two ANSI Z359.11 certified lanyard attachment loops at waist • UL Classified NFPA 1983 (2012 ED) Class III Harness and ANSI Z359.11 • Attachment points: dorsal, front and rear waist, sternal, shoulders 202162: Small (26” - 32” waist)
$655.00
202164: Medium (32” - 42” waist)
$655.00
202165: Large (42” - 48” waist)
$655.00
HELIX HARNESS
• Quick to don and fast to adjust • Contrasting web thread color aids in inspection • Two tool attachment loops integrated into shoulder straps • Over sized D-rings on waist, chest and sides for multiple connectors • Front lift assembly accepts connector for adding a chest ascender • Braided gear loops offer ideal tool access and gear management • UL Classified ANSI Z359.11 and NFPA 1983 (2012 ED) Class III Harness • Integrated Fall-Arrest Indicator
PROSERIES® HARNESS COMBO
• The ProSeries Harness Combo consists of the ProSeries Rescue Harness and ProSeries Chest Harness, which together make a Class III full-body harness. The chest harness can be removed to allow the seat harness to be used alone. If your primary need is a Class III harness but you want the flexibility of also having a seat harness, our Combo is the perfect fit
202832: Small (26” - 32” waist)
$450.00
203172: Small (26” - 30” waist)
$536.00
202834: Medium (32” - 42” waist)
$450.00
203174: Regular (30” - 44” waist)
$536.00
202835: Large (42” - 48” waist)
$450.00
203175: X-Large (42” - 46” waist)
$536.00
74
www.FireSafetyUSA.com
75
Strechers
75 | RESCUE
SKED RESCUE SYSTEM
PLASTIC HARDBOARD
• Rugged one piece lightweight polyethylene spineboard with twelve large hand holes for easy handling, built in runners, low profile and X-ray translucent. Comes with 4 straps. • Color: Bright Yellow • Dimensions: 72” Length x 16” Width • Weight: 15 lbs. • Load Capacity: 400 lbs JSA-365: Plastic Backboard
$169.00
• Compact storage, ease of use, and flexibility in means of transport have made the Sked stretcher popular with fire departments, rescue squads, the military, and ski patrols. Made from a heavy sheet of plastic, the stretcher becomes rigid when folded around your patient. The system comes complete with the stretcher, Cordura® nylon backpack/towing harness, two straps, horizontal lift slings, vertical lift sling, one large steel carabiner, and four removable web handles. The storage bag is 36 inches (91 cm) long by 9 inches (23 cm) in diameter 752001
$614.00
LIGHTWEIGHT BASKET STRETCHER BACKBOARD RACK
• Organized storage for back boards not in use • Holds up to eight boards at one time • Available wall mounted or mobile with heavy-duty casters • Wall Mount - 20” Wide x 72” High • Mobile - 20” Wide x 78” High BBR-WM: Wall Mounted Backboard Rack
$305.00
BBR-M: Mobile Backboard Rack
$505.00
• Nylon web straps at chest, abdomen, thigh, and calf. Adjustable footrests for vertical lifting. Frame is 5/8” steel tubing; cross braces and runners 3/16” x 3/4” flat steel. Basket is 18 gauge, 1” hexagon mesh netting. Dimenstions: 80.5 “ Length; 8 “ Height, Chest: 22.5“ Width; Abdomen 22“ Width; Thigh 21.5“ Width; Calf 20.5 “ Width, Carton Size: 83” x 24” x 8”, Weight: 31 Ibs., Load Capacity: 1500 lbs. • JSA-300-W: Stretcer without leg divider, designed to accommodate most 6” x 72” full length backboards JSA-300-W: without Leg Divider
$265.00
JSA-300: with Leg Divider
$275.00
JSA-300-B: Break Away Lightweight Basket Stretcher
$575.00
PLASTIC STRETCHER
• Yellow high-density polyethylene shell, supported by a stainless steel outer rail, permanently attached with stainless steel semi-tubular rivets. Features molded runners, fully exposed outer rail, non-absorbent foam pad secured to stretcher and four patient restraint straps. Ideal for unusually rugged rescue situations such as industrial, mining or construction. Four patient restraint straps are included. • Dimensions: 84.5” Length x 24” Width x 7.5” • Height, Weight: 31 lbs., load capacity: 1200 lbs. JSA-200: Plastic Stretcher
$605.00
JSA-200-B: Break Away Plastic Stretcher
$825.00
PROSERIES® LITTER HARNESS
• This fully adjustable litter harness intended for use with a rigid litter features parachute buckles on each of the four legs. This allows them to be adjusted independently, so the litter can be quickly and easily set at the best angle for condition or patient comfort. A heavy duty O-ring is used for the top tie-in point and a 10-ft (3-m) tender line and a nylon storage bag are included. Carabiners not included 724121
$270.00
877.699.3473
75
76 VEHICLE EQUIPMENT | 76Chocks, Tiles & Cabinets
RESPOND READY CABINETS
• We use 500 lb. slides on our entire range of drawer sizes • Steel is galvanized to protect against rust and corrosion • Heavy duty 14 gauge steel sides • Latch-strikes are galvanized against wear • Drawer fronts are powder coated in Respond Ready Red • Top shelf telescopes for fl exible installations • The best lockable handles in the business • Designed and manufactured in the USA • Cabinets are fully customizable, pricing is for drawers with a width between 22” - 38”
4 Drawer Cabinet
$2,995.00
5 Drawer Cabinet
$3,450.00
6 Drawer Cabinet
$3,895.00
7 Drawer Cabinet
$4,350.00
32” WHEEL CHOCK
• Made of high strength aluminum • Large rear opening hand grip • Meets applicable NFPA standards
COMPARTMENT TILES
• Black interlocking tiles sold individually • Case = 36 tiles 1212: BLACK
$4.50
1212: CASE
$150.00
AC-32: 32” Wheel Chock
$85.00
QCH-32-H: Horizontal Mount Bracket
$75.00
QCH-32-V: Vertical Mount Bracket
$67.50
SCENE DOTS
• SCENEdots™ come in a sheet consisting of 100 dots • Uses 3M™ Scotchlite® retro-reflective material, 7 Year Warranty • Diamond grade style • Sold in sheets of 100
FOLDING WHEEL CHOCK
• Made of high strength aluminum, includes carry handle • Meets applicable NFPA standards
SCENEDOTS: RED
$15.95
SCENEDOTS: YELLOW
$15.95
510949 (SAC-44-E): Folding Wheel Chock
SCENEDOTS: WHITE
$15.95
SQCH-44-H: Horizontal Mount Bracket
76
www.FireSafetyUSA.com
$215.00 $65.00
Kussmaul77|
77 VEHICLE EQUIPMENT
AIR EJECT
• Automatic air line disconnects • Automatically disconnects air line when vehicle is started 091-28: Air Eject 091-28AK: Weatherproof adapter kit
$225.00 $50.00
AUTO EJECT • • •
Automatic power line disconnect Cover colors: red, white, gray, blue, gold, black, or yellow Optional weather enclosure to help protect from the weather elements
PLUS PUMP KITS • •
Includes the following: [1] 12V Auto Pump Air Compressor [1] 20AMP Auto Eject [1] Single or Dual System Battery Charger [1] Bar Graph Indicator Super kits include an upgraded display and a super auto eject instead of standard auto ejects
51-21-1100: Pump Plus 1000 System, single
$1,025.00
091-18WP-012: 12V 15AMP Model
$195.00
53-21-1100: Pump Plus 2000 System, dual
$1,025.00
091-18WP-120: 120V 15AMP Model
$195.00
52-23-1106: Pump Plus 1200 Super Kit, single
$1,275.00
53-23-1106: Pump Plus 2000 Super Kit, dual
$1,275.00
091-18CP: Enclosure
$32.50
DATA PORT SUPER AUTO EJECTS
• Completely sealed automatic power line disconnects • Cover colors: red, white, gray, blue, gold, black, or yellow 091-55-15-120: 15AMP Super Auto Eject
$250.00
091-55-20-120: 20AMP Super Auto Eject
$275.00
BATTERY AND CHARGE SYSTEMS • • • • •
Provides access to router Standard RJ45 Connector Category 3, 5E, 6, & 6A performance EIA/TIA 568A/B compliant ensuring compatibility and reliability Fully stamped shielding offers isolation from EMI/RFI
091-227
$32.50
BLUETOOTH MODULE
Single or dual battery chargers with power supply 18 AMPS total output, built in 3-AMP battery saver Microprocessor controlled, completely automatic operation regulates output to a single battery bank Parasitic Load Compensation allows for user input of total accessory load amps on the vehicle Precision voltage controller senses battery voltage, eliminating need for sense wires
091-215-12: Single Battery Auto Charge 1000 PLC
$525.00
091-237-12: Dual Battery Auto Charge 2000 PLC
$575.00
• Provides a fully integrated solution for delivering high quality stereo audio in a small form factor • Fully compatible with Bluetooth version 2.1+EDR, 1.2, and 1.1 • Dual-channel, differential audio output for highest quality audio • Profiles include HFP, HSP, A2DP, AVRCP, and DI • Operation Range is 10 meters (33 feet) 091-226
$140.00
USB DUAL PORT NGR
AUTO DRAIN
• The Auto Drain AC contains all the components required for a moisture trap that is to be installed on the 091-9B-1 air compressor. A normally open solenoid valve drains the moisture from the trap each time the compressor shuts down. Easily installed on any 091-9B-1, Auto Pump AC, the Auto Drain AC assures that the filter bowl is always drained and does thiswithout intervention by maintenance personnel 091-9-089: Auto Drain
• • • • •
$160.00
• Dual USB Charging Ports • Quick and easy way to recharge electronic devices in a vehicle • 3 Amps max output allows charging of both an IPad and IPhone at the same time • Built-In LED Indicator indicates device is powered • Reverse polarity protected • Designed for easy installation in vehicle switch panels 091-219-12-N
877.699.3473
$40.00
77
78 VEHICLE EQUIPMENT | 78Newton Chutes & Dump Valves
MANUAL DUMP VALVE & EXTENSION CHUTE
• Dump Valve Size: 10” x 10” x 24” • Choose 24”, 36”, or 48” length extension chutes • Pricing for Mild Steel. Call for pricing on Stainless and Aluminum 1050: with top valve handle 1060: with handle on the left side 1065: with handle on the right side
MATING INSTALLATION TUBE
SWIVEL DUMP CHUTE
• This swivel chute allows 180 degrees of water dumping • Extends up to 29 inches from the middle of the swivel • It can be used with a 4036 to extend an additional 36 inches • Choose Mild or Stainless Steel
• For use with installation of dump valves 105090: Mild Steel
$170.00
105090-24: Aluminum
$240.00
105090-34: Stainless
$240.00 $800.00
6012SW: Mild Steel Swivel
$1,525.00
1414P: Mild Steel Triple Dump
6012SW-34: Stainless Steel Swivel
$2,650.00
1414P-34: Stainless Steel Triple Dump
A N ON W O SH
MANUAL EXTENSION CHUTE • •
$595.00 $695.00 $695.00
Choose 24”, 36”, or 48” length extension chutes or Elbow Chute Pricing for Mild Steel. Call for pricing on Stainless and Aluminum
2024: 24” Extension Chute
$215.00
2036: 36” Extension Chute
$250.00
$1,150.00
LVE P VA M U 0D #106
36” MANUAL TELESCOPIC CHUTE
• Extends 36” beyond the valve • Slides back to 24” when not in use • Photo Shown on a #1060 Dump Valve • Can be mounted on any Newton Kwik Dump Valve • Dump Valve not included • Choose Mild or Stainless Steel
2048: 48” Extension Chute
$295.00
4036: Mild Steel Telescopic Chute
$525.00
2090: 90-Degree Elbow Chute
$425.00
4036-34: Stainless Steel Telescopic Chute
$650.00
78
www.FireSafetyUSA.com
Gauges & Repair Kits79|
79 VEHICLE EQUIPMENT
LIQUID FILLED GAUGES
• Class 1 gauges are “Made in the USA” by people who provide unmatched integrity and the finest service to firefighters and emergency personnel. Class 1 is recognized for innovations such as our liquid-filled pressure gauges with patented freeze proof SUB-Z isolator
CAP GAUGE
• Choose 1.5” thru 3.0” cap gauges • Includes petcok to release pressure
91523932: 2.5” [-30 - 0 - 400]
$50.00
91523933: 2.5” [-30 - 0 - 600]
$45.00
154-15: 1.5” Cap Gauge
$105.00
91553941: 3.5” [-30 - 0 - 600]
$85.00
154-25: 2.5” Cap Gauge
$125.00
91583953: 4.5” [-30 - 0 - 600]
$100.00
154-3: 3.0” Cap Gauge
$150.00
91669765: 6” [-30 - 0 - 600]
$325.00
PITOT GAUGE
• Pitot with liquid filled gauge and vibration-free performance • For testing pumps and hydrants • All brass tube with bleeder valve • Takes pressure readings and determines the amount of water flow from any size opening up to 8” diameter
2.5” ENCASED LINE GAUGE
• 2.5” FNH X 2.5” MNH line gauge 155-25: 2.5” Encased Line Gauge
$110.00
U359
$225.00
Call us for Akron Parts! Toll Free: 1-877-699-3473
BALL VALVE REPAIR KITS
LINE GAUGE
• Choose 1.0” thru 3.0” line gauges
350131: 1.0” Akron Kit
$75.00
350132: 1.5” Akron Kit
$84.00
153-1: 1.0” Line Gauge
$115.00
350232: 2.0” Akron Kit
$110.00
153-15: 1.5” Line Gauge
$102.50
350133: 2.5” Akron Kit
$105.00
153-25: 2.5” Line Gauge
$104.50
350134: 3.0” and 3.5” Akron Kit
$155.00
153-3: 3.0” Line Gauge
$119.50
877.699.3473
79
80 VEHICLE EQUIPMENT | 80Lightbars & Warning Lights
STARBURST AUXILIARY LED LIGHT
• The patented STARBURST™ DLX3 series LED auxiliary light is a small and powerful weather resistant package perfect for mounting on motorcycle saddlebags, in trunks,on vehicle fenders, mirrors, or any place a small intense LED light is needed. Using STAR generation-3 LED’s it has current limit protection over the entire operating voltage range and reverse polarity protection gives you worry free operation. The STARBURST™ DLX3 is offered in a variety of colors and they can be synchronized with other STARBURST™DLX3s. High/Low power select and 11 different customer selectable flash patterns are available, including a Steady On, for many customized possibilities. Ships complete with 3’ attached wire harness, gasket, and instructions. Product Features: • Weather resistant housing, Interior or exterior mounting • High intensity, STAR Generation-3 LEDs • Synchronizing capability, Reverse polarity protection • Current limit protection over entire operating voltage • 6 Customer selectable flash patterns including a Steady-On • Selectable Day/Night mode • 3’ Five conductor wire harness • Dimensions: 1-3/16” H x 4” W x 2” D • Voltage: 10V - 16V DC • Amp Draw: Less than 1 Amp • Colors: Amber, Blue, Clear, Red, Green DLX3-X
CONTOUR MINI LIGHTBAR
• Made to “contour-fit” to the roof of your pick-up truck or vehicle. The injection-molded polycarbonate base combines with a rubbercoated vacuum magnet to “custom” mount on to your vehicle. The result is a perfect fit with no scratches to your paint • Extremely low profile! Dimensions: 3”H x 16 1/2”L x 8 3/8”D • Super bright M-Tech Plus® LED technology provides superior warning light image • Dome Colors: Amber, Clear, Red, Blue and Green • LED options: Amber, White, Amber/White, Amber/Blue, Red/Blue with Clear dome • 12’ Cigarette plug adapter 9100LED: Permanent Mount
$299.00
9100LEDM: Magnetic Mount
$339.00
$59.95
LED MINI LIGHTBAR
• M-Tech Plus® LED technology provides superior 360° warning light image • Rugged one-piece, extruded, anodized aluminum base • Dome Colors: Red, Amber, Blue, Clear or Green • LED Colors: Red, Amber, Blue, Clear or Green • Magnetic Mount version comes with 12’ cig plug 9016LED-P: Permanent Mount
$375.00
9016LED-M: Magnetic Mount
$395.00
PERIMETER WARNING LED LIGHT
• DLXT Perimeter Warning Lights • Only ½” thick! • Weather resistant housing • Fully encapsulated circuitry • Interior or exterior surface mounting • Comes with chrome bezel • High intensity, PLCC4 LEDs • Synchronizing capability • Reverse polarity protection • Current limit protection over entire operating voltage • 11 Customer selectable flash patterns including a Steady-On • Dimensions: 2.25” H x 5.75” W x 1/2” D • Voltage: 10V - 16V DC Amp Draw: Less than 1 Amp • Ships complete with mounting hardware, gaskets, and instructions • Colors: Amber, Blue, Green, Red, White DLXT-121C
80
$65.00
MINI-PHANTOM LIGHTBAR
• Alternating Flashing 9.0” wide LED lightbar with cig plug with switch • Perfect for undercover or unmarked vehicle applications with overhead center consoles • Low profile – Less than 1” high, for interior applications only • Easily mounts to your dash, deck, mirror, or windows (with suction cups) • Sixty-six long life, alternating flashing LEDs • 24 Customer selectable flash patterns via push button switch • Lens Colors: Red/Red, Amber/Amber, Blue/Blue, Red/Blue, Blue/White, Red/White ULB9
www.FireSafetyUSA.com
$97.50
Lightbars 81|
81 VEHICLE EQUIPMENT
NFPA JUSTICE SERIES SUPER LED LIGHTBAR
• Four red Linear Super-LED corner modules on “V” End models, and two red front corner modules on Square End models • The front of the lightbar contains two white CON3™ modules and two red CON3 modules • White CON3 modules have independent control to shut off when the vehicle is in blocking action • Lightbar meets NFPA 1901 upper Zone A lighting standards • Clear outer lens standard with a moisture resistant compression fit gasket • Black polycarbonate base on an extruded aluminum platform for added strength • Adjustable mount foot allows the lightbar to be mounted parallel to the street surface, no matter the shape of the vehicle roof • Standard passenger side cable, driver side optional • Service oriented lightbar allows easy to upgrade or service lightbar right in the field • Remove four screws to access any section of the lightbar • Lighthead replacement is as simple as removing one screw and single connector • 52 Flash patterns • Optional LED brake/tail/turn and Traffic Advisor with or without control head available • Five year warranty JE2NFPA: 56” Whelen NFPA Justice Lightbar
$1,475.00
JE0NFPA: 62” Whelen NFPA Justice Lightbar
$1,525.00
SLIM-MISER LED DASHLIGHT • • • • •
LINZ6 SUPER LED LIGHTHEAD
• Whelen LINZ6 Super LED Lighthead. A sub-compact, full featured LED Light head with wide angle high intensity output. It’s small size allows surface mounting virtually anywhere using included Black flange kit. Chrome Flanges are available. Fully encapsulated electronics for full moisture and vibration protection. 25 Scan Lock patterns, synchronize feature for alternating or synchronous patterns of multiple lamps. Available in Red, Blue, White and Amber colors. Simple installation with no external drivers, flashers, or power supplies needed. 5 Year Warranty • Black flange included • Size: 2” H x 4” W x 1 5/8” D LINZ6R: Red
$125.00
LINZ6B: Blue
$125.00
LINZ6W: White
$125.00
LINZ6A: Amber
$125.00
LINZ6FC: Optional Chrome Flange
$15.00
Whelen reliability in an economical but highly effective LED dash light Available in single color, red or amber and split colors of blue/red LEDs features low amp draw and provide long life and are rated for 100,000 hours of operation 5 Year Warranty Size: 1-5/8” H x 2-3/4” D x 12-7/8” L
SMLLRR: Red/Red
$125.00
SMLLAA: Amber/Amber
$125.00
SMLLBR: Blue/Red
$125.00
EDGE FREEDOM LED LIGHTBAR • • • • • • • • •
DYAD™ two level technology allows for individual control of each level of each lighthead Each model has one or two sealing points, assuring lightbar integrity in all weather conditions 100% solid-state electronics Corner modules available in “V End” or “Square End” 12 Flash patterns Clear outer lenses, optional color filters Permanent mount 55”, Four Red Corners and Four Front (2 Red/2 White) 5 Year Warranty
F4N2VLED
877.699.3473
$2,095.00
81
82 VEHICLE EQUIPMENT | 82Scene & Generator Lights
NOVA-LITE GENERATOR LIGHT
• Light/Generator with 500 watts of Quartz Halogen lighting • Features a Honda Engine • Runs 4 – 8.7 HRS TEU-1000DA: 1000W Generator Light
$1,395.00
TEU-2000DA: 2000W Generator Light
$1,725.00
• Honda EB3000 Generator • Two Tele-Lite 500W Quartz Halogen telescoping lights • Two Tele-Lite 500W Quartz Halogen portable lights • Two L5-L15 receptacles with weather-resistant cover • Two 25-foot yellow 10/3 SJOOW extension cords • Low center of gravity and large wheels for mobility • Rugged offset stainless steel grab bar • Front facing outlets for convenience, various configurations available EB-3000-NOVA
$4,795.00
LED SINGLE FIXTURE LIGHT LED CONVERTIBLE DUAL FIXTURE LIGHT
• 4,400 Lumens • Dual light fixtures • Each light fixture can be pointed in different directions for maximum lighting • Light fixture base unit can be removed from tripod stand for low angle illumination • The tripod stand will extend the lights up to 6 feet high • Multi-angle tilt and swivel fixture design • Multi-fin heat sink keeps lights cool to the touch • Each LED is rated at 50,000 hours of life SL-1522
82
$120.00
• 950 Lumens • Single light fixture producing 950 Lumens of light from a single 10W LED • Powerful magnetic base for hands-free operation • Multi-angle tilt and swivel fixture design • Multi-fin heat sink keeps light cool to the touch • LED is rated at 50,000 hours of life • Comfort-grip padded handle • Single sealed push button switch • Tempered glass lens SL-1504: 950 Lumens
$39.95
SL-1514: Magnetic 2200 Lumens
$54.95
SL-1512: Fixed 2200 Lumens
$49.95
www.FireSafetyUSA.com
Scene Lights83|
83 VEHICLE EQUIPMENT
PIONEER LIFE PORTABLE AREA LIGHT 12V PIONEER PLUS SUPER LED SINGLE HEAD FLOOD LIGHT • Whelen Pioneer Plus Super LED Flood Lights are 12v DC. • PFP1P1 have a single head and 7,000 Lumens • Includes on/off switch on lighthead • Choose Pedestal Mount or Pole Mount • 5 Year Warranty PFP1P1: Single Head, Lighthead Only
$915.00
PFP1P1-86930NB4: Single Lighthead with Side Mount Telescopic Pole
$1,625.00
PFP1P1-86930NB2: Single Lighthead with Top Mount Telescopic Pole
$1,625.00
12V PIONEER PLUS SUPER LED DUAL HEAD FLOOD LIGHT • Whelen Pioneer Plus Super LED Flood Lights are 12v DC • PFP2P1 have a dual head and 14,000 Lumens • Includes on/off switch on lighthead • Choose Pedestal Mount or Pole Mount • 5 Year Warranty PFP2P1: Dual Head, Lighthead Only
$1,395.00
PFP2P1-86930NB4: Dual Lighthead with Side Mount Telescopic Pole
$2,095.00
PFP2P1-86930NB2: Dual Lighthead with Top Mount Telescopic Pole
$2,095.00
• Battery operated: 12V DC rechargeable • All new SlimLine optic is optimized for portable applications in order to control and focus light to work areas • 100% solid-state electronics • Color temperatures reach 6,000° kelvin, simulating bright midday light • 3,500 usable lumens • Adjustable ratcheting mechanism allows for a 180° range of uninterrupted light • IP67 rated for dust and water resistance • Virtually no RFI/EMI radiation, the portable area light will not interfere with portable communication devices LF35
$1,125.00
MICRO PIONEER SUPER LED WORKLIGHT
• Whelen Micro Pioneer Series Super LED Work/Scene Lights • Rugged Die-cast Powder Coated Aluminum housing. • Provides 3800 Lumens of usable light and comes with 3 additional interchangeable lenses for your choice of light pattern • Bail mounting bracket included with stainless steel mounting hardware • 5 Year Warranty • Size: 4 3/4” W x 4 5/8” H MPBW: White Housing
$325.00
MPBB: Black Housing
$325.00
877.699.3473
83
84 VEHICLE EQUIPMENT | 84Wash & Accessories FIREMAN’S FRIEND FOLDING STEPS
• Choose small or large folding steps • Spring holds step firmly in open or closed position • Die Cast Zinc Alloy with Polished Chrome Finish • Light Kit is designed to mount behind and illuminate the large step FS46Z01C: Small Step
$40.00
LFS46ZC: Large Step
$59.00
LFS46ZL: LED Light Kit for Large Step
$38.00
• Absorbs Liquids Many Times Faster Than Chamois • Durable synthetic material won’t tear or fray • Fully machine washable • Give your apparatus the finishing touch with the Fireman’s Friend. Your Fireman’s Friend is not a leather chamois, nor is it a terry cloth - it’s the best drying tool you’ll ever discover. • This large 17” x 27” drying cloth soaks up large volumes ofwater and other liquids quickly. The soft absorbent materialwill not scratch or leave lint. The Fireman’s Friend is machinewashable and stores easily in its own container T235: Firemans’ Friend
$12.95
VEHICLE WASH HANDRAIL BRACKET STANCHIONS
• Polished Chrome Handrail Bracket Stanchions • Grooved Handrails Sold Per Foot
• Dries 95% spot free without towel drying • Neutral pH formula, safe for vehicle surfaces • Highly concentrated formula is very cost effective • Easy to use: Simply Foam, Brush and Rinse. Kit includes one five gallon pail of vehicle wash, hose end foamer and telescopic vehicle brush
291525: End Mount Stanchion
$19.50
291528: Center Mount Stanchion
$19.50
VW401: [4] One Gallon Jugs
HBP64Z01C: Base Plate Stanchion
$19.50
VW105: One Five Gallon Pail
286582: Grooved Handrail, per foot
$9.95
VCK1: Vehicle Wash Kit
$69.50 $76.50 $185.00
SMALL ENGINE FUEL
MANSAVER SAFETY BARS
• Constructed with aluminum extrusion and aluminum bronze castings, so it does not rust • Covered with a heavy layer of foam and a tough rip-stop vinyl outer covering • Available from 14” through 36” (even sizes only) • Standard bar is provided with bright yellow vinyl cover, red is available at no extra charge • Available with or without covers MSA110-A
84
$320.00
www.FireSafetyUSA.com
• Available in 2 versions, each is “ready to use” - just pour it in • For use in outdoor power equipment only • Comes in a case of (8) 1 quart bottles • Premixed holder keeps cans secured and organized where you need them most SEF94-4CYLCLE: Unleaded Fuel
$45.00
SEF94-50:1: 2-cycle 50:1 Premix
$45.00
QM-PMH-1: Single Premix Holder
$42.50
QM-PMH-D: Double Premix Holder
$69.99
Wash & Wax 85|
TIRE FINISH
85 VEHICLE EQUIPMENT
BUG WASH
• This Product provides a like new look to vinyl, rubber and plastic. Matte finish will not remain sticky or wet. This long lasting formula will not attract dirt or road grime.
• Ready to use formula, simply spray on and wipe off, no water needed, non-fuming, ammonia free formula. Requires minimal scrubbing, pH neutral
TF132: 32 oz Bottle
$9.25
BW132: 32 oz Bottle
$9.95
TF432: 4x32 oz Case
$33.50
BW432: 4x32 oz Case
$37.50
TF101: 1 Gallon
$24.50
BW101: 1 Gallon
$20.95
TF401: 4x1 Gallon Case
$96.50
BW401: 4x1 Gallon Case
$74.50
BW105: 5 Gallon Pail
$81.50
TF105: 5 Gallon Pail
$105.50
ALUMINUM AND METAL CLEANING KIT
• This product is designed to make the cleaning and maintenance of all polished metal surfaces fast, safe and easy. Requires no polishing or buffing and the desired effects are achieved with minimal effort. Removes rust stains and oxidation from aluminum, stainless steel and chrome. Will not turn aluminum white or gray. Basic Kit includes: 1 – Gallon Aluminum & Metal Cleaner and Brightener 1 – PF002: Pump Up Foam Sprayer 1 – BR002: Short Handle Brush
WASH AND WAX
• This is an excellent vehicle cleaner that leaves a deep shine and surface protection. Apply directly on the vehicle with our hose-end foamer, brush, rinse and squeegee or towel dry. Product can also be used as a manual wash or in any pressure washing system
Standard Kit includes: 1 – 4 Gallons Aluminum & Metal Cleaner and Brightener 1 – PF002: Pump Up Foam Sprayer 1 – Long Handle Brush DPK1: BASIC KIT DPK2: STANDARD KIT
WW101: 1 Gallon
$25.75
WW401: 4x1 Gallon
$82.50
WW105: 5 Gallon Pail
$89.50
$55.95
WW130: 30 Gallon Drum
$535.00
$110.95
WW155: 55 Gallon Drum
$735.00
APPARATUS WAX GLASS CLEANER
• This glass cleaner provides a streak free shine with no fogging GC132: 32 oz Bottle
$6.75
• Advanced technology provides easy glide on application with a resistance free wipe off. Produces a noticeably mirror like finish. This wax eliminates fine scratches and is safe for all paints
$24.50
AW132: 32 oz Bottle
$17.25
GC101: 1 Gallon
$15.25
AW432: 4x32 oz Case
$66.75
GC401: 4x1 Gallon Case
$56.75
AW101: 1 Gallon
$55.75
GC105: 5 Gallon Pail
$69.50
AW401: 4x1 Gallon Case
GC432: 4x32 oz Case
877.699.3473
$205.00
85
86 VEHICLE EQUIPMENT | 86Portable & Floating Pumps
6 HP HONDA PORTABLE PUMP
• Dual stage centrifugal pump • Pump body made from aluminum • Aluminum impeller, Mechanical shaft seal • Self priming system • Two x 1.0” delivery outlets • One 1.5” NPSH delivery outlet • One 1.5” NPSH suction inlet • Dimensions: 19” L x 17” W x 16” H - 59 lbs. • 36 watt alternator and Low oil alert • Outlets are NPSH Thread
FLOATING PUMP
PFP-6HP-HND-M-TWIN: Manual Recoil 6HP
$1,350.00
PFP-6HP-HND-EM-TWIN: Electric 6HP with Recoil Backup
$1,650.00
• 11HP Honda or 6 HP Kawasaki • Manual recoil start, 2 quarts integrated fuel tank • Direct drive C.E.T. single stage centrifugal pump • One 2.5” outlet, One 3” suction inlet floater, Light weight heavy duty floater • Dimensions for 11HP: Length: 32 1/4”, Width: 30”, Height: 22 1/8”, Weight: 120 lbs. • Dimension for 6HP: Length: 35”, Width: 25 1/2”, Height: 19”, Weight: 64 lbs. PFP-11HPHND-FL: 11HP Honda Black
$2,250.00
PFP-6HP-FL: 6HP Kawasaki Red
$1,225.00
20HP PORTABLE PUMP 9 HP HONDA PORTABLE PUMP
• Dual stage centrifugal pump • Pump body made from aluminum • Aluminum impeller • Self priming system • Two 1” delivery outlets • One 1.5” NPSH delivery outlet • One 1.5” NPSH suction inlet • Dimensions: 20” L x 17” W x 17” H • 36 watt alternator and Low oil alert • Outlets are NPSH Thread PFP-9HP-HND-M-TWIN: Manual Recoil
$1,950.00
PFP-9HP-HND-EM-TWIN: Electric with Recoil Backup
$2,200.00
• 20hp Koehler or 20hp Honda • air cooled engine, V-Twin cylinder gasoline engine • C.E.T. single stage centrifugal pump • Pump body made from high resistance aluminum alloy • Bronze impeller, Mechanical shaft seal • Exhaust priming system, guaranteed up to 20’ lift • One 1.5” delivery outlet with 1/4-turn ball valve • One 2.5” suction inlet • Dimensions: 22” L x 27” W x 24” H • Koehler Flow: 265 GPM @ 50 PSI, • Honda Weight: 183 lbs • Koehler Weight: 180 lbs INCLUDED ACCESSORIES: • Swivel spotlight, 36 watt alternator • Pressure gauge, Low oil alert, 12-V battery PFP-20KHL-MR: 20HP Koehler
$4,250.00
PFP-20HND-MR: 20HP Honda
$4,750.00
11HP HONDA PORTABLE PUMP
• Honda 11hp at 3600 RPM, air cooled engine • Single cylinder gasoline engine • 6 quarts integrated fuel tank • Direct drive single stage centrifugal pump • Pump body made from resistant aluminum alloy • Bronze impeller, Mechanical shaft seal • Exhaust priming system, guaranteed up to 20’ lift • One 2.5” delivery outlet with 1/4-turn ball valve • One 2.5” suction inlet • Dimensions: 23.25” L x 22-3/8” W x 23-5/8” H • Weight: 125 lbs. • Swivel spotlight • #PFP-11HP-HND-M: 115 lbs, does not include swivel spotlight and 36 watt alternator • #PFP-11HP-HND-EM: 125 lbs, does include swivel spotlight and 36 watt alternator PFP-11HP-HND-M: Manual Recoil
$2,850.00
PFP-11HP-HND-EM: Electric with Recoil Backup
$3,100.00
86
www.FireSafetyUSA.com
Skid Units 87|
87 VEHICLE EQUIPMENT
ECONO PAC SKID UNIT
• Low mount configuration • PFP-6hpHND-M twin fire pump • Pump capacity 20 gpm at 125 psi • Self priming fire pump • 65 gallon water tank • Manual rewind hose reel • 100’ x 5/8 booster hose • Forestry nozzle • 1.5” inlet & outlet with cap and chain • 1” valve for hose reel • 1” valve for tank fill / recirculating • 3/4” polypropylene platform with under lifting area SKID-ECONO
$3,350.00
20 HP SLIDE IN SKID UNIT
Standard Options Include: • 200 Gallon Poly Water Tank • 1.0” Tank Fill Valve, 2.5” Suction Valve, 2.5” Tank to Pump Valve • 1.5” Discharge with Cap and Chain • Pump Size: 20 HP Pump • Pump Style: Electric with Recoil Backup • Hose Reel: Electric reel, holds 100’ of 1.0” booster hose • Includes 100’ of 1.0” booster hose • Water tank can be upgraded to 250, or 300 gallons • Water tank Dimensions: 8’ L x 4’ W, call to customize! 20HP-SKID
$10,400.00
Option: Upgrade to a 250 gallon water tank, add
$100.00
Option: Upgrade to a 300 gallon water tank, add Option: Add Scotty Foam System with 5 Gallon Foam Cell
$200.00 $1,000.00
SLIDE IN SKID UNIT
Standard Options Include: • 200 Gallon Poly Water Tank • 1.0” Tank Fill Valve, 2.5” Suction Valve, 2.5” Tank to Pump Valve • 1.5” Discharge with Cap and Chain • Pump Size: 6.5 HP, 9 HP or 11 HP • Pump Style: Electric with Recoil Backup • Hose Reel: Electric reel, holds 100’ of 1.0” booster hose • Includes 100’ of 1.0” booster hose • Water tank can be upgraded to 250, or 300 gallons • Water tank Dimensions: 8’ L x 4’ W, call to customize! 6HP-SKID
$7,995.00
9HP-SKID
$8,500.00
11HP-SKID
$9,200.00
Option: Upgrade to a 250 gallon water tank, add
$100.00
Option: Upgrade to a 300 gallon water tank, add
$200.00
Option: Add Scotty Foam System with 5 Gallon Foam Cell
$1,000.00
877.699.3473
87
88 VEHICLE EQUIPMENT | 88Skid Units UTV FIRELITE SKID UNIT
• All aluminum construction with bright aluminum diamond plate • Hose bed section for hard suction, forestry hose, nozzles etc. • Pump features quick disconnect tie down system for fast removal • Unit comes complete with the Pacer® Deluxe Fire Fighting System: • Includes a centrifugal, gas driven pump powered by a 5.5 HP Briggs & Stratton OHV engine able to self prime to 25’ with initial charge; 20’ of 2” suction hose with strainer; 125’ of 1-1/2” NPT discharge hose with 1-1/2” adjustable spray nozzle; pump comes with lightweight roll cage; 60 GPM @ 45 PSI to 200 GPM @ 5 PSI • Integrated 70 gallon poly tank with quick disconnect from pump • Schedule 40 pipes & valve (1 tank to pump valve included) • Around the pump 1” line with shut off for water pack refill • Water tank sight gauge • 2- 48” x 1” grab rails at rescue area for mounting a stokes basket long board • 10- 24” long Velcro D Loop Straps Included FP-201: Firelite UTV Skid Unit
$4,750.00
UTV FIRELITE DELUXE SKID UNIT
• All aluminum construction with bright aluminum diamond plate • Hose bed storage section for hard suction, forestry hose, nozzles etc. • Pump features all metal piping & valves (pump is stationary-does not remove from skid unit) • Unit comes complete with the Darley Davey® Two Stage High Pressure Pump: Twin impeller, gas driven pump powered by a manual recoil 5.5 HP Honda engine able to self prime to 19’ ; Nitrile rubber seal & casing “O” rings; Low oil protection; One Year Pump Warranty; Two Year Engine Warranty • Flows 50 GPM @ 68 PSI; 30 GPM @ 97 PSI; 15 GPM @ 112 PSI • Comes with one gated 1.5” discharge; one gated 1.0” discharge; one gated 1.0” pump to tank refill; one gated 1.5” to booster reel; one gated 1.5” auxiliary suction; one gated 1.5” tank to pump • Integrated 75 gallon poly tank • Tank Mounted pre-connected F4000 Series Hannay Reel Manual Crank with 50’ of 1” Booster Hose or 100’ of .75” Booster Hose • Around the pump 1” line with shut off for water pack refill, Water tank sight gauge • 2 x 48” x 1” grab rails at rescue area for mounting a stokes basket or long board • 10 x 24” long Velcro D Loop Straps, Included • Optional electric rewind reel in place of manual FDH-203: with Manual Reel
$6,750.00
FDH-203-ELE: with Electric Reel
$7,150.00
FDH-203-F: with Manual Reel and Foam System
$7,450.00
FDH-203-ELE-F: with Electric Reel and Foam System
$7,850.00
UTV FIRELITE SUPERMAX TRANSPORT SKID UNIT
Includes all features of Firelite Deluxe Skid Unit in addition to: • Integrated 85 gallon poly tank • Adapter to refill water back packs in the field without starting pump • Tailgate at rear of hose storage area • Unit ships fully assembled 48” W x 55” L x 41” H (height to top of reel) FST-204: with Manual Reel
$7,500.00
FST-204-ELE: with Electric Reel
$7,900.00
FST-204-F: with Manual Reel and Foam System
$8,200.00
FST-204-ELE-F: with Electric Reel and Foam System
$8,600.00
SUPERMAX UNITS WITH ENGINE UPGRADE OPTIONS
88
Upgrade to 9HP Electric Start Honda Engine, add
$1,200.00
Upgrade to 13HP Electric Start Honda Engine, add
$1,500.00
www.FireSafetyUSA.com
Skid Units89|
89 VEHICLE EQUIPMENT
UTV MEDLITE TRANSPORT BASIC
The MEDLITE™ Transport Basic (MTB-10) is designed to carry one patient on a long board or a stokes basket and one EMS attendant. The long board or stokes basket are easily attached to the unit using 10 Velcro D loop straps which are included. The attendants seat with seat belt is a fixed position seat. The MTB-10 comes with an adjustable end point so that the unit can be adjusted to accept a long board or the longer stokes basket. When it comes to off road rescues, safety and patient comfort are the key. Whether you are using it as a medical rescue or for a third passenger during search and rescues, the MEDLITE™ Transport MTB-10 slide in skid unit should meet your needs and budget. Stokes basket or longboard not included. 48” W x 76” L x 20” H MTB-101: Medlite Transport Basic
$2,800.00
UTV MEDLITE AND MEDLITE DELUXE
Designed by Firefighters and Emergency Medical Technicians for use by all public safety agencies. This design puts the patient and the medical care attendant front and center. It is built for rough terrain to be used in all weather situations. Made of aluminum, it is rugged, rust proof and affordable. This emergency rescue skid unit is designed to quickly turn any UTV utility vehicle into a “mini ambulance”. The MEDLITE™ Transport is designed to carry one patient, one EMS attendant and assorted emergency gear. The long board is easily attached to the unit using 10 Velcro D loop straps which are included. The attendants seat with seat belt glides on wheels the entire length of the unit and is able to be locked in three different locations along the guide rails to meet any emergency situation. It has 9 cubic feet of enclosed storage under the patient area for medical bags, trauma supplies and oxygen. The unit comes standard with a retractable IV pole. When it comes to off road rescues, safety and patient comfort are the key. Whether you are using it as a medical rescue or for a third passenger during search and rescues, the MEDLITE™ Transport slide in skid unit should meet all your needs. The MEDLITE™ Transport Deluxe includes all standard items on MEDLITE™ Transport plus a slide-out tray in the storage area; 02 holder to hold a standard size “D” bottle with regulator; and 3rd Attendant Rail. MTS-102: Medlite Rescue Skid
$3,200.00
MTD-103: Deluxe Rescue Skit
$3,600.00
FIRELITE DELUXE SKID UNIT FOR TRUCKS
Built to last, our line of FIRELITE® Transport skid units are made for budget minded departments. These capable, no nonsense wild land firefighting skid units will get the job done, are low profile and also have a rescue capability. This unit comes complete with an electric rewind Hannay 4000 series reel and Scotty Around the Pump class A foam system with 5 gallon foam cell! • All aluminum construction with bright aluminum diamond plate and aluminum tubing sub-frame • Hose bed storage section with tail gate for storing hard suction, forestry hose, nozzles etc • Features all stainless steel piping and 1/4 turn brass valves • Units comes complete with the Darley-Davey® Two Stage High Pressure Pump: Twin impeller, gas driven Honda engine pump powered by a manual recoil 5.5 HP or an electric start 9 & 13 HP able to self prime to 19’; Nitrile rubber seal & casing “O” rings; Low oil protection; One Year Pump Warranty; Two Year Engine Warranty • Comes with 2 gated 1-1/2” discharges 1 to side 1 to rear; 1 gated 1” pump to tank refill; 1 gated 1” to booster reel; 1 gated 1-1/2” auxiliary suction; 1 gated 1-1/2” tank to pump - all NST threads • Available 5.5, 9, 13 HP Darley-Davey Pump • Available 125, 160 or 200 gallon poly water tank with integrated 5 gallon foam cell and baffles • Pre-connected F4000 Series Hannay Electric Reel® with 100’ of 3/4” or 50’ of 1” Booster Hose FDHP-125-301: 125 Gallon with 5.5 HP Pump
$8,250.00
877.699.3473
89
90 VEHICLE EQUIPMENT | 90PSV
One Great Public Safety Vehicle (PSV)! MTD-103 Advanced Level
FST-204 Supermax
ATLAS JSV-6000 ATLAS JSV-3000
Fire Safety USA, Kimtek Corporation and the Gravely Atlas JSV bring a whole new level of product design, safety, durability and ease of use to public safety agencies wanting the best when choosing a “turn key� solution for their off road or urban setting UTV side by side requirements. Starting with the Gravely Atlas JSV 3000 single seat or 6000 crew model 4x4 both available with a 1028cc 24HP Kohler diesel or 570cc 40 HP Gas Motor, this rugged chassis with De Dion Rear Suspension and CVT continuous drive transmission will take you almost anywhere your emergency call takes you. Next, all of the quality Medlite medical and Firelite fire-rescue skid units manufactured by Kimtek Corporation will fit the Gravely Atlas JSV chassis. This gives you tremendous options in picking the right skid unit for your mission while working within a specific budger. With over 4000 skid units in service world wide, Kimted skid units are the choice of fire and ems professionals because of their durability, reliability and price. Finally, Fire Safety USA brings this all together with their top notch upfitting division allowing the fire department, law enforcement or ambulance service to choose specific emergency lighting, sirens, scene lights, graphics and more! Once complete, Fire Safety USA will ship your complete turn key PSV anywhere in the country!
Call Fire Safety USA today for your free quote and consultation! 90
www.FireSafetyUSA.com
Minnesota, Wisconsin, Iowa, ND & SD
91 91 | REGIONALLY RESTRICTED
UNIVERSAL AMBULANCE FLEET
Fire Safety USA, Inc. is proud to represent the finest and most distinguished manufacturer of emergency & speciality vehicles in the marketplace today. 3253 19th Street NW, Rochester, MN 55901 Mike Peck 507.269.7739 - mpeck@firesafetyusa.com
877.699.3473
91
92 92 | REGIONALLY RESTRICTED
Minnesota, Wisconsin, Iowa & ND
SERVICE DIVISION
FIRE SAFETY USA PROVIDES STATE OF THE ART SERVICE AND REPAIRS FOR ALL MAKES & MODELS OF EMERGENCY VEHICLES FROM TWO REGIONAL SERVICE CENTERS AS WELL AS MULTIPLE MOBILE SERVICE UNITS!
Choose FSUSA EVT Certified
MOBILE SERVICE TEAM! Â We Come to You!
Fire Truck Repair ISO Pump Testing Full Vehicle Services Vehicle Safety Inspections E-ONE Factory Authorized Repair Center Professional, Certified and Affordable 92
www.FireSafetyUSA.com
Minnesota, Wisconsin, Iowa & ND
93 93 | REGIONALLY RESTRICTED
FSUSA IS THE E-ONE FIRE APPARATUS DEALER FOR THE STATES OF MINNESOTA, WISCONSIN, NORTH DAKOTA AND 91 COUNTIES IN IOWA
EAGAN, MN
ST. CLOUD, MN
877.699.3473
93
94 94 | REGIONALLY RESTRICTED
Minnesota, Wisconsin & ND
CALL NOW FOR A
FREE LIVE DEMO
94
www.FireSafetyUSA.com
Minnesota, Wisconsin, Iowa & ND
95 95 | REGIONALLY RESTRICTED
CALL NOW FOR A
FREE LIVE DEMO
877.699.3473
95
96 96 | REGIONALLY RESTRICTED
Minnesota & Wisconsin
AUTO X-STRUT®
The Auto X-Strut® brings pin-free stabilization and lifting to light vehicle rescue! This light, fast and ultra-portable strut combines the pin-free operation of our premium Super X-Strut® with our Aluminum X-style square chassis, in a compact package for light-duty rescue LONG STRUT COLUMN WLL
3,250 LBS
3,250 LBS
LIFTING WLL
2,500 LBS
2,500 LBS
87.25”
66.75”
EXTENDED COLLAPSED WEIGHT
GreenLite™ X-STRUT®
You don’t need to sacrifice quality or effectiveness to come in at your budget. The GreenLite™ X-Strut® boasts the same features as our bigger struts, but is scaled down for use with lighter-duty vehicles
SHORT STRUT
54.5”
44”
37 LBS
31 LBS
ALUMINUM X-STRUT®
The Aluminum X-Strut® is our most popular pinned stabilization and lifting strut, built from 6061-T6 aluminum and boasting a 10,000 working load limit with a 2:1 Safety Factor, without adding significant weight
LONG STRUT
SHORT STRUT
LONG STRUT
SHORT STRUT
COLUMN WLL
2,500 LBS
2,500 LBS
COLUMN WLL
10,000 LBS
10,000 LBS
LIFTING WLL
2,500 LBS
2,500 LBS
LIFTING WLL
6,000 LBS
6,000 LBS
EXTENDED COLLAPSED WEIGHT
96
87.5”
64”
EXTENDED
98”
66.5”
54”
42”
COLLAPSED
56”
40”
31 LBS
28 LBS
42 LBS
30 LBS
WEIGHT
www.FireSafetyUSA.com
Minnesota
CUTTER
97 97 | REGIONALLY RESTRICTED
SPREADER
COMBI & RAM
Factory Authorized Service
CALL TODAY FOR A FREE DEMO!
S100-28
ATT-6.5 877.699.3473
SLC-29 97
98 98 | REGIONALLY RESTRICTED
Minnesota & Iowa
HIGH PRESSURE COMPRESSORS Standard & Custom Systems for all High Pressure Demands
3 STAGE ARTIC COMPRESSORS MODEL
PSI
CFM
HP
RPM
WEIGHT
E3-5-A
5000
6.5
5
1100
600 LBS
E3-7.5-A
5000
9
7.5
1500
610 LBS
E3-5-A6
6000
5.5
5
1100
600 LBS
E3-7.5-A6
6000
8
7.5
1500
610 LBS
4 STAGE ARTIC COMPRESSORS MODEL
PSI
CFM
HP
RPM
WEIGHT
E4-7.5-A6
6000
9
7.5
1100
680 LBS
E4-10-A6
6000
14
10
1400
700 LBS
FEATURES 3 or 4 Stage Artic Compressor Block featuring: • Air Cooled with a High Velocity, 10 Bladed Fan • Relief Valve on All Stages • Aluminum Inter Coolers • Stainless Steel After Cooler • Interstage and Final Moisture Separators • Aluminum Crankcase • Forged Steel Crankshaft • Cast Iron Cylinders Fully Enclosed Sound Dampened Cabinet Lift Off Panel Hinges Liquid Filled Interstage Pressure Gauges Moisture / Carbon Monoxide Visual Indicator Double Rubber Vibration Isolation Automatic Condensate Drain System Double Rubber Vibration Isolation Pressure Switch Hour Meter Single or Three Phase Electric Motor
98
PURIFICATION 24,000 Cu. Ft. at 80 degrees Fahrenheit filtration system designed to provide C.G.A. Grade “E” breathing air System uses dryer bed to remove water in excess of dew point -65 degrees (NFPA 1500 Standard) Activated charcoal and a carbon monoxide catalyst remove remaining contaminants to provide CGA Grade “E” breathing air
OPTIONAL FEATURES
Real time electronic CO monitor Additional filtration capacity Low oil level shutdownr
www.FireSafetyUSA.com
Minnesota & Iowa
99 99 | REGIONALLY RESTRICTED
THE SIMPLE CHOICE BENEFITS: SIMPLE VALUE / High quality American made equipment, affordably priced SIMPLE OPERATION / Minimizes operator training requirements SIMPLE MAINTENANCE / Designed for easy maintenance, reducing overall cost of ownership SIMPLE SERVICE / Nationwide distributor / service network providing fast local service Model E4-10-A6 with Optional Electronic CO Monitor Shown
CLASS II CONTAINMENT FILL STATIONS
• Available in one, two, or three fill positions • Manual locking bar for safety • One inlet connector from cascade • Fill hoses include bleed valve and SCBA fill adapters • Plastic slides to protect from scuffing • Venting at back and bottom for operator safety • Optional Control Panel: • 4 bank controls • 4-2 1/2” bank gauges • 1-4” result gauge • 0-6000 PSI input • 0-6000 PSI output adjustable regulator • 4 inlet connectors from cascades • 1 inlet connection for compressor • 1 auxiliary outlet with valve
877.699.3473
99
100
100
3253 19th Street NW Rochester, MN 55901 1•877•699•FIRE (3473) Fax: 1•507•529•8111 www.FIRESAFETYUSA.com
Over 40 years ago, our grandfather and a Minnesota Volunteer firefighter, started a family fire safety equipment business. He started by filling fire extinguishers in the family garage. Since that time, the technology of fire safety equipment has improved tenfold. What hasn’t changed is a family tradition of building quality relationships with our customers. That tradition continues to be a big part or our business. In 2005, we took what we had learned and started the next generation fire safety product and service company! The past twelve years we have grown from a small fire extinguisher service company to selling fire equipment, fire appartus, and ambulances with two full service centers. Our ability to adapt with technology and provide an easy to use website with e-commerce has truly enriched and simplified our customers experience online. Additionally, our direct mail sales catalog provides yet another easy to use product reference and sales guide. Our customers have the flexibility of ordering through our call center, e-commerce website, or direct fax line. We strive to make our company easy to work with and to make our customers experience a simple, easy and smooth experience every time. Fire Safety USA, Inc. continues to develop and maintain long-term customer relationships by providing exceptional value and customer service. We will remain a positive corporate citizen by maintaining a high level of professionalism and business ethics. Fire Safety USA, Inc. is a family business dedicated to providing quality fire and safety products at our best value available. We sincerely believe that customer service is the key to our success and future corporate growth. Fire Safety USA, Inc. is proud to offer quality products, value, and choice. Our goal is for you to consider our company as a preferred supplier for all your fire and safety product needs. Providing you with a positive experience will assist us in building a quality relationship. We would like to invite you to join our family of fire and safety customers. Again, our ultimate success depends on serving you our valued customer!
BUY ONLINE & SAVE! www.firesafetyUSA.com
• Our website constantly has deals and discounts! • Check our Clearance and Used Equipment catetories on our website for great deals!
*Contact Fire Safety USA, Inc. at 1-877-699-3473 for special pricing bids or FEMA Grants
100
www.FireSafetyUSA.com *Pricing is subject to manufacturer price increases