1/27/2016
CH100 Series Next Level/EDGE Chairs (specs)
2001
1001
1002
9003
Frame Construction 18 Gauge, 7/8” round steel tubing, prevents buckling and gives support in all directions and supports a weight capacity of up to 380 lbs. Legs have a single, 3/8” steel horizontal front brace, and dual 3/8” steel horizontal back braces for added support to the frame and to prevent side to side shear. Seat height from floor is approximately 20”. Frames have 7/8 rubber caps to protect floor surface. Seat Construction 16 Gauge rectangular steel (steel size ½” rect.?) seat frame with rolled sides for additional strength. Seat frame is 15-½” Wide X 16-½” Deep. Seat base is ½”, moisture resistant smart board, and is padded with 2 ½” thick, 8 lb. density rebond foam, covered with 30 oz expanded sewn vinyl Backrest Construction 1” HiD Ethacell closed cell foam; laminated to a curved 1/8” shaped plywood backboard with threaded metal inserts; covered in 30 oz expanded vinyl. Upholstered backrest is approximately 16-½” W x 7-½” H. Metal Frame Finish Powder coat frame of not less than a thickness of 2.5 mm in 10 different colors Colors Frame/Upholstery – As per customer selections Logo(s) - Locations On chair backrest, top of seat cushion, and front edge Warranty Minimum 10 year limited metal frame warranty Maximum 3 year limited warranty on padded pieces SEAT HEIGHT: 20” SEAT SIZE: 15 ½” w x 16 ½”d BACK SIZE: 16-½”w x 7-½”h, FRAME HEIGHT – open: 32 ¼” FRAME HEIGHT – closed: 41 ¼”
FRAME WIDTH – includes ganging: 17 5/8” on center FRONT TO BACK: 20” FOLDED THICKNESS: 4”. CHAIR WEIGHT: 18 lbs facebook.com/fisherathletic twitter.com/fisher_athletic
www.fisherathletic.com PH: 800-438-6028
•
customerservice@fisherathletic.com
•
Fax: 800-272-4448