manual
GB
force60BS
industrial sectional door operator. INSTALLATION / MAINTENANCE © All rights reserved. FlexiForce®, 2011
FF-MANUAL force60BS/1
force60BS.indd 1
www.flexiforce.com 11-01-11 11:09
manual
GB
ATTENTION! GENERAL WARNINGS! To install, use and maintain this operator safely, a number of precautions must be taken. For the safety of all concerned pay heed to the warnings and instructions given below! If in doubt, contact your supplier.
99This manual has been written for use by experienced fitters and as such is not suitable for d.i.y. purposes or for 99 99 99 99
99 99
use by trainee fitters. This manual describes the installation of the electrical operator. Be sure to supplement this manual if needed with instructions for any additional components not described in this manual. Before starting, read this manual carefully! Certain components may be sharp or have jagged edges. As such you are advised to wear safety gloves. All the components which have been supplied are designed for use with this specific electrical operator. Replacement or adding additional components may have an adverse effect on the safety of, and the guarantee on, the electrical operator. Also the CE-approval which has been granted to this electrical operator will be cancelled when components are changed or installation is not done according to this manual! Installer is responsible for this. During tensioning, springs can exert large forces. Work carefully. Use the proper equipment. Ensure that you are standing in a steady position. Ensure that there is sufficient light during installation. Remove obstacles and dirt. Make sure that there is no one else present other than the fitters. Other people (children!) may get in the way or endanger themselves during the installation.
WARRANTY, TERMS & CONDITIONS The general terms and conditions of delivery and payment issued by the Metaalunie and designated as METAALUNIE CONDITIONS are fully applicable to all our quotations, contracts and their implementation. We expressly reject all other terms and conditions. On request we will send you a copy of these terms and conditions free of charge. A copy may also be downloaded from our website www.flexiforce.nl.
CONTACT FlexiForce Group B.V., P.O. Box 37, 3770 AA Barneveld, The Netherlands Tel. +31-(0)342-427777, info@flexiforce.nl
FF-MANUAL force60BS/2
force60BS.indd 2
www.flexiforce.com 11-01-11 11:09
manual
GB
CONTENT OF PACKAGING
1x
FF
1x
1x 1x
1x
2x 1x 1x
1x
4x 4x
TOOLS REQUIRED FOR CORRECT AND RAPID ASSEMBLY
-+
( ) ( )
Bit 4.0 mm Bit 4.5 mm Bit 6.5 mm
8 mm 13 mm 13 mm
FF-MANUAL force60BS/3
force60BS.indd 3
www.flexiforce.com 11-01-11 11:09
manual ASSEMBLY OPERATOR Fig. 1
Fig. 2 n. mi
0
13
1
Fig. 2
Fig. 4
Fig. 3
2
3 6.35 (1/4")
6.35 (1/4") 9.5 (3/8")
Fig. 5
Remarks:
4
FF-MANUAL force60BS/4
force60BS.indd 4
www.flexiforce.com 11-01-11 11:09
manual ASSEMBLY RELEASE Fig. 6
Fig. 7
S
. p.A.
I,3 C (VA) ANF E .B DIT NS P.LLA MO Y A R ONNO VI CA ITAL FAX.02/9650314
21042 TE
L.02/963911 PE TY
DOOR
YE
AR
00000T OF
UR
E
MANUFAC
0000 LY E
VOLTAG
S UP
P
000V R E
SE
R IAL
N UMB
Ita
ly
in 00000000000 Ma
S
de
.p.A.
I,3 C (VA) ANF E .B DIT NS P.LLA MO A R ONNO VI CA ITALY .02/9650314 FAX
21042 TE
L.02/963911 PE R
TY
DOO
YE
AR
00000T OF
M
UR
E
ANUFAC
0000 LY E
VOLTAG
S UP
P
000V R E
SE
R IAL
NUMB
in 000000000
00 Ita
ly
Made
1
Fig. 9
Fig. 8
2
FF
TO LD CK HO LO UN
UNLOCK
FF
LIMIT SWITCH ADJUSTMENT Fig. 10
C B
A
C B
C A
FF-MANUAL force60BS/5
force60BS.indd 5
A www.flexiforce.com 11-01-11 11:09
manual WIRING
B
Black
12
Brown
11
Additional switch
A
Opening limit switch
C
Closing limit switch
12B 11B Brake Yellow/Green
FF
U V Grey
M 1~
com
~
W
10 m (4x1,5 mm²)
~ +
Note: With the provided push button the control panel isn’t necessary.
11
1,5 m (3x1,5 mm²)
12
W
10 2
L
N
230 V~ 50 Hz
FF-MANUAL force60BS/6
force60BS.indd 6
www.flexiforce.com 11-01-11 11:09
manual DIMENSIONS
MAIN FEATURES Travel control system
Mechanical rotary limit switch
Control type
HOLD-TO-RUN only
Duty class
4-heavy
Duty cycles
S2=30 min / S3=50%
Power supply
230V~/50Hz
Insulation class
class 1
Input
3A
Torque
60Nm
Drive shaft RPM
22 RPM
Release system
By cable
Operating temperature
-20˚C/ +55˚C / (-35˚C/ +55˚C with NIO enabled)
Protection class
IP 54
FF-MANUAL force60BS/7
force60BS.indd 7
www.flexiforce.com 11-01-11 11:09
Power is not all that is needed to operate your doors…..
Operators for overhead doors can be bought from anyone at any quality and any price. However, we believe that the key in being successful in selling operators with your doors, is in the ultimate combination of a good product, a good price, from local warehouses, with very good after sales back up. If you add to this combination the “one-stop-shop: operators + hardware”, you will agree with us that FlexiForce offers you the best solution for your operator business. Challenge us for becoming your supplier!
I: www.flexiforce.com
force60BS.indd 8
E: info@flexiforce.nl
11-01-11 11:09