guidelines GB 速
rev.0 Februari-11
SafeStep
Pass door System for fingersafe panels
PRODUCTION GUIDE preparing panels
1
Suited panels.
Kingspan/ Epco R-series
Metecno
Thyssen
2
E
(no end caps)
C B B B A
+0 828 -1 +0 910 -1
3
A
24 ±0,5 4
B
5
C 43 ±0,5
312 ±0,5
6
80PS
cut length 80PS (x2)
7
SafeStep
速
Pass door System for fingersafe panels
PRODUCTION GUIDE option 1: one piece low threshold
8
910+93= 1003 +1 -0 910+15= 925 ±0,5
E 1041L
MILLING 9
option 1: one piece low threshold MILLING 77 Âą0,5
(This is the width of end cap so it can vary.)
77 Âą0,5
(Possibility to customise this dimension to fit overhead door width better.)
10
SafeStep
速
Pass door System for fingersafe panels
PRODUCTION GUIDE option 2: three piece low threshold
11
1041L
910+93= 1003 +1 -0 910+15= 925 ±0,5
E-154
See Tips and Tricks. 12
1041LE
1041L-01
77 Âą0,5
(This is the same dimension as the width of end cap. So it can vary.)
13
14
SafeStep
速
Pass door System for fingersafe panels
PRODUCTION GUIDE
sawing Kingspan/Epco profiles
15
CONFIGURATION KIT right handed door
KIT left handed door
ATTENTION!
Left and right version. Right version drawn on drawings. Add the HINGE HOLE to the side (left/right) where the hinges are needed.
16
Option: make holes by using drill pattern, drawing: 10 135 050.
A 0,5
14
4
,1(x 4)
30 15
23
1
STANDARD
(2,3)
FOR INFORMATION ONLY !
93°
B 0,5
20,5 11
Left and right version, right handed version drawn 50
1 1 Alu for Door Casing ITEM QTY DESCRIPTION
28-12-2010 REVISION DATE SCALE:
PANEL HEIGHT TREATMENT STANDARD HINGE HOLES LOCK HOLE STANDARD HINGE HOLES LOCK HOLE
500 500 500 610 610 610
ART.CODE BRUT ALS1-500KE00R/L ALS1-500KE10R/L ALS1-500KE20R/L ALS1-610KE00R/L ALS1-610KE10R/L ALS1-610KE20R/L
4) ,5(x
LOCK HOLE
) (x4 R4
D
6
Alternative for cutting holes: use profile 1033LSF, drwaing 58 148 600.
ART.CODE ANODISED ALS1-500KE01R/L ALS1-500KE11R/L ALS1-500KE21R/L ALS1-610KE01R/L ALS1-610KE11R/L ALS1-610KE21R/L
ART.CODE WHITE RAL9016 ALS1-500KE02R/L ALS1-500KE12R/L ALS1-500KE22R/L ALS1-610KE02R/L ALS1-610KE12R/L ALS1-610KE22R/L
Dim.A 432,9 432,9 432,9 542,9 542,9 542,9
Dim.B 491,3 491,3 491,3 601,3 601,3 601,3
Dim.C 314 424 -
Dim.D 202 257
WEIGHT 0,451 kg 0,417 kg 0,447 kg 0,55 kg 0,516 kg 0,546 kg
1:2
1033LS ARTICLE CODE
58 148 000 DRAWING NO.
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet DESCRIPTION DRAWING NO. bottom panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
15-10-2010 REV. DATE REMARKS
Changed drill pattern drawing number. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 110 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 110.idw
17
) (x4 R4
76 88
C 0,5
80
NOMINAL DIMENSION
A
HINGE HOLES
33
14
6
A(1:1)
17
A 0,5
14
Option: make holes by using drill pattern, drawing: 10 135 050.
4
,1(x 4)
30 15
23
1
6
FOR INFORMATION ONLY !
B 0 -1
14
A(1:1)
6
104 °
(24,1)
STANDARD
6
4) ,5(x
76 88
C 0,5
80
33
R4 (x4 )
17
A
HINGE HOLES
Left and right version, right handed version drawn 1 1 Alu for Door Casing ITEM QTY DESCRIPTION
28-12-2010 REVISION DATE SCALE:
PANEL HEIGHT TREATMENT STANDARD HINGE HOLES LOCK HOLE STANDARD HINGE HOLES LOCK HOLE
500 500 500 610 610 610
ART.CODE BRUT ALS2-500KE00R/L ALS2-500KE10R/L ALS2-500KE20R/L ALS2-610KE00R/L ALS2-610KE10R/L ALS2-610KE20R/L
ART.CODE ANODISED ALS2-500KE01R/L ALS2-500KE11R/L ALS2-500KE21R/L ALS2-610KE01R/L ALS2-610KE11R/L ALS2-610KE21R/L
ART.CODE WHITE RAL9016 ALS2-500KE02R/L ALS2-500KE12R/L ALS2-500KE22R/L ALS2-610KE02R/L ALS2-610KE12R/L ALS2-610KE22R/L
Dim.A 444,5 444,5 444,5 554,5 554,5 554,5
Dim.B 490,5 490,5 490,5 600,5 600,5 600,5
Dim.C 314 424 -
Dim.D 202 257
WEIGHT 0,448 kg 0,414 kg 0,445 kg 0,547 kg 0,505 kg 0,543 kg
1:2
1033LS ARTICLE CODE
58 148 000 DRAWING NO.
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet DESCRIPTION DRAWING NO. middle panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
15-10-2010 REV. DATE REMARKS
Changed drill pattern drawing number and tolerance. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 120 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 120.idw
50
) (x4 R4
D
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
LOCK HOLE
11
20,5
Alternative for cutting holes: use profile 1033LSF, drwaing 58 148 600.
18
286,4
Option: make holes by using drill pattern, drawing: 10 135 060.
45°
4
,1(x2 )
10
23
1
STANDARD (268,53)
6
355,5 +- 01
) (x4 R4
4) ,5(x
76 88
(91)
107
6
157,5
17
A
HINGE HOLES
33
14
A(1:1)
6
FOR INFORMATION ONLY !
(24,1)
104 °
SCALE:
TREATMENT STANDARD HINGE HOLES LOCK HOLE
500/610 500/610 500/610
ART.CODE BRUT ALS3-300KE00R/L ALS3-300KE10R/L ALS3-300KE20R/L
ART.CODE ANODISED ALS3-300KE01R/L ALS3-300KE11R/L ALS3-300KE21R/L
58 148 000 DRAWING NO.
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
15-10-2010 REV. DATE REMARKS
(127,5)
50
28-12-2010 REVISION DATE
PANEL HEIGHT
1033LS ARTICLE CODE
TOLERANCE
ART.CODE WHITE RAL9016 ALS3-300KE02R/L ALS3-300KE12R/L ALS3-300KE22R/L
WEIGHT 0,277 kg 0,243 kg 0,273 kg
1:2
Changed drill pattern drawing number and tolerance. DESCRIPTION GENERAL ROUGHNESS:
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet top DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 130 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 130.idw
R4( x4)
178
1 1 Alu for Door Casing ITEM QTY DESCRIPTION
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
Left and right version, right handed version drawn
11
LOCK HOLE
20,5
Alternative for cutting holes: use profile 1033LSF, drwaing 58 148 600.
19
Option: make holes by using drill pattern, drawing: 10 135 060, 10 135 160 or 10 135 260. A 0,5
45° (x2)
4
,1(x2 )
10 (x2 )
23
1
(B-162)
NOMINAL DIMENSION
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
FOR INFORMATION ONLY ! B 0,5
28-12-2010 REVISION DATE SCALE:
ART.CODE TREATMENT STANDARD STANDARD
BRUT ALS4-1002U00 ALS4-1212U00
ART.CODE ANODISED ALS4-1002U01 ALS4-1212U01
ART.CODE WHITE RAL9016 ALS4-1002U02 ALS4-1212U02
Dim.A 927,7 1137,7
Dim.B 1002 1212
WEIGHT 0,831 kg 1,005 kg
1:2
1033LS ARTICLE CODE
58 148 000 DRAWING NO.
15-10-2010 REV. DATE REMARKS
Changed drill pattern drawing number. DESCRIPTION GENERAL ROUGHNESS:
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet DESCRIPTION DRAWING NO. horizontal ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
JoFr NAME TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 140 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 140.idw
1 1 Alu for Door Casing ITEM QTY DESCRIPTION
TOLERANCE
20
A 0,5 14
23
45°
30 15
(10 )
1(x 4,
4)
Option: make 3x screw holes by using drill pattern, drawing: 10 135 050.
1
STANDARD (B-70)
B 0,5
73 0,2(x2)
Option: make holes by using drill pattern, drawing: 10 135 020.
HINGE HOLES
C 0,5
FOR INFORMATION ONLY !
LOCK HOLE
Left and right version, right handed version drawn
19
16,6
80
D
133
1 1 Alu for Door Panel ITEM QTY DESCRIPTION
R4 (x4 )
28-12-2010 REVISION DATE SCALE:
PANEL HEIGHT TREATMENT STANDARD HINGE HOLES LOCK HOLE STANDARD HINGE HOLES LOCK HOLE
500 500 500 610 610 610
ART.CODE BRUT ALD1-500KE00R/L ALD1-500KE10R/L ALD1-500KE20R/L ALD1-610KE00R/L ALD1-610KE10R/L ALD1-610KE20R/L
ART.CODE ANODISED ALD1-500KE01R/L ALD1-500KE11R/L ALD1-500KE21R/L ALD1-610KE01R/L ALD1-610KE11R/L ALD1-610KE21R/L
ART.CODE WHITE RAL9016 ALD1-500KE02R/L ALD1-500KE12R/L ALD1-500KE22R/L ALD1-610KE02R/L ALD1-610KE12R/L ALD1-610KE22R/L
Dim.A 413,4 413,4 413,4 523,4 523,4 523,4
Dim.B 488,5 488,5 488,5 598,5 598,5 598,5
Dim.C 314 424 -
Dim.D 160,5 215,5
WEIGHT 0,307 0,306 0,293 0,375 0,373 0,357
kg kg kg kg kg kg
1:2
1033LD ARTICLE CODE
58 149 000 DRAWING NO.
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door bottom DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
Adjusted drawing numbers of drill patterns. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 110 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 149 110.idw
x4 )
20
6,5 (
NOMINAL DIMENSION
21
Option: make holes by using drill pattern, drawing: 10 135 050.
A 0,5
,1(x 4)
23
30 15
14
4
1
6
Option: make holes by using drill pattern, drawing: 10 135 020.
HINGE HOLES
) x2 ,5( 8
C 0,5
19
13,6
Left and right version, right handed version drawn 1 1 Alu for Door Panel ITEM QTY DESCRIPTION
17,5 PANEL HEIGHT
ART.CODE BRUT ALD2-500KE00R/L ALD2-500KE10R/L ALD2-500KE20R/L ALD2-500KE30R/L ALD2-500KE40R/L ALD2-610KE00R/L ALD2-610KE10R/L ALD2-610KE20R/L ALD2-610KE30R/L ALD2-610KE40R/L
2
F+160,25
R4 (x4 )
196 ART.CODE ANODISED ALD2-500KE01R/L ALD2-500KE11R/L ALD2-500KE21R/L ALD2-500KE31R/L ALD2-500KE41R/L ALD2-610KE01R/L ALD2-610KE11R/L ALD2-610KE21R/L ALD2-610KE31R/L ALD2-610KE41R/L
46
181,5
B
1034CLM LOCK HOLE
20
ART.CODE WHITE RAL9016 ALD2-500KE02R/L ALD2-500KE12R/L ALD2-500KE22R/L ALD2-500KE32R/L ALD2-500KE42R/L ALD2-610KE02R/L ALD2-610KE12R/L ALD2-610KE22R/L ALD2-610KE32R/L ALD2-610KE42R/L
Dim.A 444,5 444,5 444,5 444,5 444,5 554,5 554,5 554,5 554,5 554,5
Dim.B 490,5 490,5 490,5 490,5 490,5 600,5 600,5 600,5 600,5 600,5
Dim.C 314 424 -
Dim.D 160,5 215,5 -
Dim.E 107,4 162,4 -
Dim. F 144,1 199,1
WEIGHT 0,324 kg 0,323 kg 0,311 kg 0,297 kg 0,299 kg 0,395 kg 0,394 kg 0,379 kg 0,362 kg 0,365 kg
28-12-2010 02-10-2010 REVISION DATE SCALE:
1:2
1033LD ARTICLE CODE
58 149 000 DRAWING NO.
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door middle DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
Added 1034CLM LOCK HOLE to drawing. Changed toleration. Changed dimensions DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 120 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-1 Safe Step\02-Tekeningen\Actieve map ipt, iam en idw\58 149 120.idw
70,5 92
NOMINAL DIMENSION
16,6
) (x4 12
R4 (x4 )
230
500 500 500 500 500 610 610 610 610 610
38
18
A
MAIN LOCK HOLE
F
TREATMENT STANDARD HINGE HOLES LOCK HOLE MAIN LOCK HOLE 1034CLM LOCK HOLE STANDARD HINGE HOLES LOCK HOLE MAIN LOCK HOLE 1034CLM LOCK HOLE
157
E
20
9 1 2
19
133
92
B ( 3:7 ) SIDE VIEW OF 1034CLM LOCK HOLE
) (x4 R4
D
17
E+190 LOCK HOLE
16,6
80
1
20
73 0,2(x2)
,5(x 4)
25
6
1
A ( 3:7 ) SIDE VIEW OF MAIN LOCK HOLE
B 0 -1
1
104 °
9
FOR INFORMATION ONLY !
(24,1)
STANDARD
22
192,9
Option: make holes by using drill pattern, drawing: 10 135 060.
4
,1(x 2)
23
45°
10
1
STANDARD (210)
104 °
(24,1)
6
+ 286 - 01
6,5
HINGE HOLES 73(x2)
(x4 )
Option: make holes by using drill pattern, drawing: 10 135 040.
20
FOR INFORMATION ONLY !
133
SCALE:
1:2
TREATMENT STANDARD HINGE HOLES LOCK HOLE
500/610 500/610 500/610
ART.CODE BRUT ALD3-300KE00R/L ALD3-300KE10R/L ALD3-300KE20R/L
ART.CODE ANODISED ALD3-300KE01R/L ALD3-300KE11R/L ALD3-300KE21R/L
58 149 000 DRAWING NO.
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
(86) 28-12-2010 REVISION DATE
PANEL HEIGHT
1033LD ARTICLE CODE
TOLERANCE
ART.CODE WHITE RAL9016 ALD3-300KE02R/L ALD3-300KE12R/L ALD3-300KE22R/L
WEIGHT 0,17 kg 0,169 kg 0,156 kg
Adjusted drawing numbers of drill patterns. Changed tolerance. DESCRIPTION GENERAL ROUGHNESS:
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door top DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 130 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-1 Safe Step\02-Tekeningen\Actieve map ipt, iam en idw\58 149 130.idw
67
1 1 Alu for Door Panel ITEM QTY DESCRIPTION
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
Left and right version, right handed version drawn
19
LOCK HOLE
(91)
R4 (x4 )
107
16,6
88
23
Option: make holes by using drill pattern, drawing: 10 135 060, 10 135 160 or 10 135 260.
10 (x2 ) 45° (x2)
A 0,5
4
,1(x 2)
1
(B-140)
28-12-2010 REVISION DATE SCALE:
1:2
TREATMENT STANDARD STANDARD
BRUT ALD4-863U00 ALD4-1073U00
ANODISED ALD4-863U01 ALD4-1073U01
ART.CODE WHITE RAL9016 ALD4-863U02 ALD4-1073U02
Dim.A 740,7 950,7
Dim.B 863 1073
WEIGHT 0,538 kg 0,656 kg
1033LD ARTICLE CODE
58 149 000 DRAWING NO.
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door DESCRIPTION DRAWING NO. horizontal ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
Adjusted drawing number of drill pattern. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 140 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 149 140.idw
1 1 Alu for Door Panel ITEM QTY DESCRIPTION
ART.CODE
NOMINAL DIMENSION
FOR INFORMATION ONLY !
B 0,5
ART.CODE
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
24
FOR INFORMATION ONLY !
ISO 2768c 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
13(x2)
A
1
TOLERANCE
±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2 ±3 ±4
1 1 Low threshold alu profile for seal ITEM QTY DESCRIPTION
REVISION DATE SCALE:
1:2
ART.CODE TREATMENT
BRUT ALB4-833U00 ALB4-1043U00
ART.CODE ANODISED ALB4-833U01 ALB4-1043U01
ART.CODE WHITE RAL9016 ALB4-833U02 ALB4-1043U02
Dim.A 833 mm 1043 mm
1033LB 58 168 000 10-09-2009 ARTICLE CODE DRAWING NO. REV. DATE REMARKS
DESCRIPTION GENERAL ROUGHNESS:
3.2
NAME PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 TREATMENT Low threshold profile DRAWING NO. DESCRIPTION for seal with cut ... ARTICLE CODE REVISION DATE NAME JoFr DATE 29-11-2010 kg NETT WEIGHT ...
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-cK.
58 168 500 29-11-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A3 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-1 Safe Step\02-Tekeningen\Actieve map ipt, iam en idw\58 168 500.idw
35(x2)
25
SafeStep
速
Pass door System for fingersafe panels
PRODUCTION GUIDE
sawing Metecno profiles
26
CONFIGURATION KIT right handed door
KIT left handed door
ATTENTION!
Left and right version. Right version drawn on drawings. Add the HINGE HOLE to the side (left/right) where the hinges are needed.
27
Option: make holes by using drill pattern, drawing: 10 135 150.
A 0,5
14
4
,1(x 4)
30 15
23
1
STANDARD
(2,3)
FOR INFORMATION ONLY !
83 °
93°
(5,4)
B 0,5
20,5 11
Left and right version, right handed version drawn 50
1 1 Alu for Door Casing ITEM QTY DESCRIPTION
28-12-2010 REVISION DATE SCALE:
PANEL HEIGHT TREATMENT STANDARD HINGE HOLES LOCK HOLE STANDARD HINGE HOLES LOCK HOLE
500 500 500 610 610 610
ART.CODE BRUT ALS1-500M00R/L ALS1-500M10R/L ALS1-500M20R/L ALS1-610M00R/L ALS1-610M10R/L ALS1-610M20R/L
4) ,5(x
LOCK HOLE
) (x4 R4
D
6
Alternative for cutting holes: use profile 1033LSF, drwaing 58 148 600.
ART.CODE ANODISED ALS1-500M01R/L ALS1-500M11R/L ALS1-500M21R/L ALS1-610M01R/L ALS1-610M11R/L ALS1-610M21R/L
ART.CODE WHITE RAL9016 ALS1-500M02R/L ALS1-500M12R/L ALS1-500M22R/L ALS1-610M02R/L ALS1-610M12R/L ALS1-610M22R/L
Dim.A 440,4 440,4 440,4 550,4 550,4 550,4
Dim.B 498,8 498,8 498,8 608,8 608,8 608,8
Dim.C 314 424 -
Dim.D 209 264
WEIGHT 0,456 kg 0,422 kg 0,452 kg 0,555 kg 0,521 kg 0,551 kg
1:2
1033LS ARTICLE CODE
58 148 000 DRAWING NO.
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet DESCRIPTION DRAWING NO. bottom panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
15-10-2010 REV. DATE REMARKS
Changed drill pattern drawing number. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 210 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 210.idw
17
) (x4 R4
76 88
C 0,5
80
NOMINAL DIMENSION
A
HINGE HOLES
33
14
6
A(1:1)
28
A 0,5
14
Option: make holes by using drill pattern, drawing: 10 135 150.
4
,1(x 4)
30 15
23
1
11
FOR INFORMATION ONLY ! A(1:1)
14
B 0 -1
6
109 ,5°
(31)
STANDARD
6
4) ,5(x
76 88
C 0,5
80
33
R4 (x4 )
17
A
HINGE HOLES
Left and right version, right handed version drawn 1 1 Alu for Door Casing ITEM QTY DESCRIPTION
28-12-2010 REVISION DATE SCALE:
PANEL HEIGHT TREATMENT STANDARD HINGE HOLES LOCK HOLE STANDARD HINGE HOLES LOCK HOLE
500 500 500 610 610 610
ART.CODE BRUT ALS2-500M00R/L ALS2-500M10R/L ALS2-500M20R/L ALS2-610M00R/L ALS2-610M10R/L ALS2-610M20R/L
ART.CODE ANODISED ALS2-500M01R/L ALS2-500M11R/L ALS2-500M21R/L ALS2-610M01R/L ALS2-610M11R/L ALS2-610M21R/L
ART.CODE WHITE RAL9016 ALS2-500M02R/L ALS2-500M12R/L ALS2-500M22R/L ALS2-610M02R/L ALS2-610M12R/L ALS2-610M22R/L
Dim.A 444,5 444,5 444,5 554,5 554,5 554,5
Dim.B 497,5 497,5 497,5 607,5 607,5 607,5
Dim.C 314 424 -
Dim.D 209 264
WEIGHT 0,45 kg 0,416 kg 0,447 kg 0,549 kg 0,507 kg 0,545 kg
1:2
1033LS ARTICLE CODE
58 148 000 DRAWING NO.
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet DESCRIPTION DRAWING NO. middle panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
15-10-2010 REV. DATE REMARKS
Changed drill pattern drawing number and tolerance. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 220 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 220.idw
50
) (x4 R4
D
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
LOCK HOLE
11
20,5
Alternative for cutting holes: use profile 1033LSF, drwaing 58 148 600.
29
278,9
Option: make holes by using drill pattern, drawing: 10 135 160.
45°
4
,1(x2 )
10
23
1
STANDARD (263,1)
11
+ 355 - 01
) (x4 R4
4) ,5(x
76 88
(90,5)
107
6
157,5
17
A
HINGE HOLES
33
14
A(1:1)
6
FOR INFORMATION ONLY !
(31)
109 ,5°
SCALE:
TREATMENT STANDARD HINGE HOLES LOCK HOLE
500/610 500/610 500/610
ART.CODE BRUT ALS3-300M00R/L ALS3-300M10R/L ALS3-300M20R/L
ART.CODE ANODISED ALS3-300M01R/L ALS3-300M11R/L ALS3-300M21R/L
58 148 000 DRAWING NO.
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
15-10-2010 REV. DATE REMARKS
(126,5)
50
28-12-2010 REVISION DATE
PANEL HEIGHT
1033LS ARTICLE CODE
TOLERANCE
ART.CODE WHITE RAL9016 ALS3-300M02R/L ALS3-300M12R/L ALS3-300M22R/L
WEIGHT 0,275 kg 0,241 kg 0,271 kg
1:2
Changed drill pattern drawing number and tolerance. DESCRIPTION GENERAL ROUGHNESS:
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet top DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 230 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 230.idw
R4( x4)
178,5
1 1 Alu for Door Casing ITEM QTY DESCRIPTION
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
Left and right version, right handed version drawn
11
LOCK HOLE
20,5
Alternative for cutting holes: use profile 1033LSF, drwaing 58 148 600.
30
Option: make holes by using drill pattern, drawing: 10 135 060, 10 135 160 or 10 135 260. A 0,5
45° (x2)
4
,1(x2 )
10 (x2 )
23
1
(B-162)
NOMINAL DIMENSION
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
FOR INFORMATION ONLY ! B 0,5
28-12-2010 REVISION DATE SCALE:
ART.CODE TREATMENT STANDARD STANDARD
BRUT ALS4-1002U00 ALS4-1212U00
ART.CODE ANODISED ALS4-1002U01 ALS4-1212U01
ART.CODE WHITE RAL9016 ALS4-1002U02 ALS4-1212U02
Dim.A 927,7 1137,7
Dim.B 1002 1212
WEIGHT 0,831 kg 1,005 kg
1:2
1033LS ARTICLE CODE
58 148 000 DRAWING NO.
15-10-2010 REV. DATE REMARKS
Changed drill pattern drawing number. DESCRIPTION GENERAL ROUGHNESS:
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet DESCRIPTION DRAWING NO. horizontal ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
JoFr NAME TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 140 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 140.idw
1 1 Alu for Door Casing ITEM QTY DESCRIPTION
TOLERANCE
31
A 0,5
14
23
45°
30 15
(10 )
1( 4,
) x4
Option: make 3x screw holes by using drill pattern, drawing: 10 135 150.
1
STANDARD
83 °
(B-70)
(5,4) B 0,5
73 0,2(x2)
Option: make holes by using drill pattern, drawing: 10 135 120.
HINGE HOLES
C 0,5
FOR INFORMATION ONLY !
Left and right version, right handed version drawn
D
133
1 1 Alu for Door Panel ITEM QTY DESCRIPTION
R4 (x4 )
28-12-2010 REVISION DATE SCALE:
STANDARD HINGE HOLES LOCK HOLE STANDARD HINGE HOLES LOCK HOLE
PANEL HEIGHT ART.CODE 500 ALD1-500M00R/L 500 ALD1-500M10R/L 500 ALD1-500M20R/L 610 ALD1-610M00R/L 610 ALD1-610M10R/L 610 ALD1-610M20R/L
ART.CODE ALD1-500M01R/L ALD1-500M11R/L ALD1-500M21R/L ALD1-610M01R/L ALD1-610M11R/L ALD1-610M21R/L
ART.CODE ALD1-500M02R/L ALD1-500M12R/L ALD1-500M22R/L ALD1-610M02R/L ALD1-610M12R/L ALD1-610M22R/L
Dim.A 420,9 420,9 420,9 530,9 530,9 530,9
Dim.B 496 496 496 606 606 606
Dim.C 314 424 -
Dim.D 167,5 222,5
WEIGHT 0,31 kg 0,309 kg 0,296 kg 0,378 kg 0,376 kg 0,36 kg
1:2
1033LD ARTICLE CODE
58 149 000 DRAWING NO.
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door bottom DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
Adjusted drawing numbers of drill patterns. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 210 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 149 210.idw
LOCK HOLE
19
16,6
80
NOMINAL DIMENSION
6,5 (x4 )
20
32
Option: make holes by using drill pattern, drawing: 10 135 150.
A 0,5
,1(x 4)
23
30 15
14
4
1
9
2
1
1
B 0 -1 Option: make holes by using drill pattern, drawing: 10 135 120.
HINGE HOLES
25
92
20
157
38
2
9
B ( 3:7 ) SIDE VIEW OF 1034CLM LOCK HOLE
19
LOCK HOLE
1
16,6
17
E+190
C 0,5
80
2) 7(x
1
73 0,2(x2)
(x4 )
20
6,5
A ( 3:7 ) SIDE VIEW OF MAIN LOCK HOLE
(31)
83 °
109 ,5°
(5,4)
FOR INFORMATION ONLY !
11
STANDARD
18
19
20 46
F+160,25
1034CLM LOCK HOLE
Left and right version, right handed version drawn
B
1 1 Alu for Door Panel ITEM QTY DESCRIPTION
17,5
13,6
) (x4 R4
230
F PANEL HEIGHT 500 500 500 500 500 610 610 610 610 610
70,5 92 181,5
E
TREATMENT STANDARD HINGE HOLES LOCK HOLE MAIN LOCK HOLE 1034CLM LOCK HOLE STANDARD HINGE HOLES LOCK HOLE MAIN LOCK HOLE 1034CLM LOCK HOLE
) (x4 12
R4 (x4 )
196 ART.CODE BRUT ALD2-500M00R/L ALD2-500M10R/L ALD2-500M20R/L ALD2-500M30R/L ALD2-500M40R/L ALD2-610M00R/L ALD2-610M10R/L ALD2-610M20R/L ALD2-610M30R/L ALD2-610M40R/L
ART.CODE ANODISED ALD2-500M01R/L ALD2-500M11R/L ALD2-500M21R/L ALD2-500M31R/L ALD2-500M41R/L ALD2-610M01R/L ALD2-610M11R/L ALD2-610M21R/L ALD2-610M31R/L ALD2-610M41R/L
ART.CODE WHITE RAL9016 ALD2-500M02R/L ALD2-500M12R/L ALD2-500M22R/L ALD2-500M32R/L ALD2-500M42R/L ALD2-610M02R/L ALD2-610M12R/L ALD2-610M22R/L ALD2-610M32R/L ALD2-610M42R/L
Dim.A 444,5 444,5 444,5 444,5 444,5 554,5 554,5 554,5 554,5 554,5
Dim.B 497,5 497,5 497,5 497,5 497,5 607,5 607,5 607,5 607,5 607,5
Dim.C 314 424 -
Dim.D 167,5 222,5 -
Dim.E 114,4 169,4 -
Dim. F 144,1 199,1
WEIGHT 0,325 kg 0,324 kg 0,312 kg 0,298 kg 0,3 kg 0,396 kg 0,395 kg 0,38 kg 0,363 kg 0,366 kg
28-12-2010 02-12-2010 REVISION DATE SCALE:
1:2
1033LD ARTICLE CODE
58 149 000 DRAWING NO.
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door middle DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
Added 1034CLM LOCK HOLE to drawing. Changed toleration. Changed dimensions DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 220 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 149 220.idw
16,6
A
MAIN LOCK HOLE
NOMINAL DIMENSION
133
) (x4 R4
D
33
180,4
Option: make holes by using drill pattern, drawing: 10 135 160.
4
23
45°
10
,1(x 2) 1
STANDARD (204,6)
109 ,5°
(31)
11
285,5 +- 01
HINGE HOLES
6,5 (x4 )
Option: make holes by using drill pattern, drawing: 10 135 140.
20
73(x2)
FOR INFORMATION ONLY !
133
SCALE:
1:2
TREATMENT STANDARD HINGE HOLES LOCK HOLE
500/610 500/610 500/610
ART.CODE BRUT ALD3-300M00R/L ALD3-300M10R/L ALD3-300M20R/L
ART.CODE ANODISED ALD3-300M01R/L ALD3-300M11R/L ALD3-300M21R/L 1033LDC...
58 149 000 DRAWING NO.
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
(86) 28-12-2010 REVISION DATE
PANEL HEIGHT
1033LD ARTICLE CODE
TOLERANCE
ART.CODE WHITE RAL9016 ALD3-300M02R/L ALD3-300M12R/L ALD3-300M22R/L
WEIGHT 0,168 kg 0,167 kg 0,154 kg
Adjusted drawing numbers of drill patterns. Changed tolerance. DESCRIPTION GENERAL ROUGHNESS:
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door top DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 230 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-1 Safe Step\02-Tekeningen\Actieve map ipt, iam en idw\58 149 230.idw
66,5
1 1 Alu for Door Panel ITEM QTY DESCRIPTION
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
Left and right version, right handed version drawn
19
LOCK HOLE
(90,5)
R4 (x4 )
107
16,6
88
34
Option: make holes by using drill pattern, drawing: 10 135 060, 10 135 160 or 10 135 260.
10 (x2 ) 45° (x2)
A 0,5
4
,1(x 2)
1
(B-140)
28-12-2010 REVISION DATE SCALE:
1:2
TREATMENT STANDARD STANDARD
BRUT ALD4-863U00 ALD4-1073U00
ANODISED ALD4-863U01 ALD4-1073U01
ART.CODE WHITE RAL9016 ALD4-863U02 ALD4-1073U02
Dim.A 740,7 950,7
Dim.B 863 1073
WEIGHT 0,538 kg 0,656 kg
1033LD ARTICLE CODE
58 149 000 DRAWING NO.
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door DESCRIPTION DRAWING NO. horizontal ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
Adjusted drawing number of drill pattern. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 140 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 149 140.idw
1 1 Alu for Door Panel ITEM QTY DESCRIPTION
ART.CODE
NOMINAL DIMENSION
FOR INFORMATION ONLY !
B 0,5
ART.CODE
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
35
FOR INFORMATION ONLY !
ISO 2768c 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
13(x2)
A
1
TOLERANCE
±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2 ±3 ±4
1 1 Low threshold alu profile for seal ITEM QTY DESCRIPTION
REVISION DATE SCALE:
1:2
ART.CODE TREATMENT
BRUT ALB4-833U00 ALB4-1043U00
ART.CODE ANODISED ALB4-833U01 ALB4-1043U01
ART.CODE WHITE RAL9016 ALB4-833U02 ALB4-1043U02
Dim.A 833 mm 1043 mm
1033LB 58 168 000 10-09-2009 ARTICLE CODE DRAWING NO. REV. DATE REMARKS
DESCRIPTION GENERAL ROUGHNESS:
3.2
NAME PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 TREATMENT Low threshold profile DRAWING NO. DESCRIPTION for seal with cut ... ARTICLE CODE REVISION DATE NAME JoFr DATE 29-11-2010 kg NETT WEIGHT ...
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-cK.
58 168 500 29-11-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A3 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-1 Safe Step\02-Tekeningen\Actieve map ipt, iam en idw\58 168 500.idw
35(x2)
36
SafeStep
速
Pass door System for fingersafe panels
PRODUCTION GUIDE
sawing Thyssen profiles
37
CONFIGURATION KIT right handed door
KIT left handed door
ATTENTION!
Left and right version. Right version drawn on drawings. Add the HINGE HOLE to the side (left/right) where the hinges are needed.
38
9,8
Option: make holes by using drill pattern, drawing: 10 135 250.
A 0,5
4
,1(x 4)
30 15
23
1
(6,2)
(2,3)
STANDARD
FOR INFORMATION ONLY !
93°
° 98
B 0,5
17
) (x4 R4
Left and right version, right handed version drawn 50
1 1 Alu for Door Casing ITEM QTY DESCRIPTION
SCALE:
TREATMENT STANDARD HINGE HOLES LOCK HOLE STANDARD HINGE HOLES LOCK HOLE
500 500 500 610 610 610
ART.CODE BRUT ALS1-500T00R/L ALS1-500T10R/L ALS1-500T20R/L ALS1-610T00R/L ALS1-610T10R/L ALS1-610T20R/L
ART.CODE ANODISED ALS1-500T01R/L ALS1-500T11R/L ALS1-500T21R/L ALS1-610T01R/L ALS1-610T11R/L ALS1-610T21R/L
ART.CODE WHITE RAL9016 ALS1-500T02R/L ALS1-500T12R/L ALS1-500T22R/L ALS1-610T02R/L ALS1-610T12R/L ALS1-610T22R/L
Dim.A 435 435 435 545 545 545
Dim.B 495,4 495,4 495,4 605,4 605,4 605,4
Dim.C 314 424 -
Dim.D 197,8 252,8
WEIGHT 0,451 kg 0,417 kg 0,447 kg 0,55 kg 0,516 kg 0,546 kg
1:2
1033LS ARTICLE CODE
58 148 000 DRAWING NO.
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet DESCRIPTION DRAWING NO. bottom panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
15-10-2010 REV. DATE REMARKS
Changed drill pattern drawing number. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 310 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 310.idw
11
20,5
LOCK HOLE
28-12-2010 REVISION DATE
PANEL HEIGHT
4) ,5(x
Alternative for cutting holes: use profile 1033LSF, drwaing 58 148 600.
) (x4 R4
D
6
76 88
C 0,5
80
NOMINAL DIMENSION
A
HINGE HOLES
33
14
6
A(1:1)
39
9,8
A 0,5
Option: make holes by using drill pattern, drawing: 10 135 250.
4
,1(x 4)
30 15
23
1
8
STANDARD
104 °
° 98
FOR INFORMATION ONLY !
(32,1)
B 0 -1
A(1:1)
14
6
6,2
6
4) ,5(x
76 88
C 0,5
80
33
R4 (x4 )
17
A
HINGE HOLES
Left and right version, right handed version drawn 1 1 Alu for Door Casing ITEM QTY DESCRIPTION
28-12-2010 REVISION DATE SCALE:
PANEL HEIGHT TREATMENT STANDARD HINGE HOLES LOCK HOLE STANDARD HINGE HOLES LOCK HOLE
500 500 500 610 610 610
ART.CODE BRUT ALS2-500T00R/L ALS2-500T10R/L ALS2-500T20R/L ALS2-610T00R/L ALS2-610T10R/L ALS2-610T20R/L
ART.CODE ANODISED ALS2-500T01R/L ALS2-500T11R/L ALS2-500T21R/L ALS2-610T01R/L ALS2-610T11R/L ALS2-610T21R/L
ART.CODE WHITE RAL9016 ALS2-500T02R/L ALS2-500T12R/L ALS2-500T22R/L ALS2-610T02R/L ALS2-610T12R/L ALS2-610T22R/L
Dim.A 444,5 444,5 444,5 554,5 554,5 554,5
Dim.B 492,8 492,8 492,8 602,8 602,8 602,8
Dim.C 314 424 -
Dim.D 197,8 252,8
WEIGHT 0,445 kg 0,411 kg 0,442 kg 0,544 kg 0,502 kg 0,54 kg
1:2
1033LS ARTICLE CODE
58 148 000 DRAWING NO.
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet DESCRIPTION DRAWING NO. middle panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
15-10-2010 REV. DATE REMARKS
Changed drill pattern drawing number and tolerance. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 320 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 320.idw
50
) (x4 R4
D
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
LOCK HOLE
11
20,5
Alternative for cutting holes: use profile 1033LSF, drwaing 58 148 600.
40
284,4
Option: make holes by using drill pattern, drawing: 10 135 260.
45°
STANDARD (264,83)
8
FOR INFORMATION ONLY !
353,8 +- 01
) (x4 R4
4) ,5(x
76 88
(89,3)
107
6
157,5
17
A
HINGE HOLES
33
14
A(1:1)
6
104 °
(32,1)
4
,1(x2 )
10
23
1
1 1 Alu for Door Casing ITEM QTY DESCRIPTION
SCALE:
TREATMENT STANDARD HINGE HOLES LOCK HOLE
500/610 500/610 500/610
ART.CODE BRUT ALS3-300T00R/L ALS3-300T10R/L ALS3-300T20R/L
ART.CODE ANODISED ALS3-300T01R/L ALS3-300T11R/L ALS3-300T21R/L
58 148 000 DRAWING NO.
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
15-10-2010 REV. DATE REMARKS
(127,8)
50
28-12-2010 REVISION DATE
PANEL HEIGHT
1033LS ARTICLE CODE
TOLERANCE
ART.CODE WHITE RAL9016 ALS3-300T02R/L ALS3-300T12R/L ALS3-300T22R/L
WEIGHT 0,275 kg 0,241 kg 0,271 kg
1:2
Changed drill pattern drawing number and tolerance. DESCRIPTION GENERAL ROUGHNESS:
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet top DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 330 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 330.idw
176
R4( x4)
11
Left and right version, right handed version drawn
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
LOCK HOLE
20,5
Alternative for cutting holes: use profile 1033LSF, drwaing 58 148 600.
41
Option: make holes by using drill pattern, drawing: 10 135 060, 10 135 160 or 10 135 260. A 0,5
45° (x2)
4
,1(x2 )
10 (x2 )
23
1
(B-162)
NOMINAL DIMENSION
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
FOR INFORMATION ONLY ! B 0,5
28-12-2010 REVISION DATE SCALE:
ART.CODE TREATMENT STANDARD STANDARD
BRUT ALS4-1002U00 ALS4-1212U00
ART.CODE ANODISED ALS4-1002U01 ALS4-1212U01
ART.CODE WHITE RAL9016 ALS4-1002U02 ALS4-1212U02
Dim.A 927,7 1137,7
Dim.B 1002 1212
WEIGHT 0,831 kg 1,005 kg
1:2
1033LS ARTICLE CODE
58 148 000 DRAWING NO.
15-10-2010 REV. DATE REMARKS
Changed drill pattern drawing number. DESCRIPTION GENERAL ROUGHNESS:
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step sheet DESCRIPTION DRAWING NO. horizontal ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
JoFr NAME TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 148 140 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 148 140.idw
1 1 Alu for Door Casing ITEM QTY DESCRIPTION
TOLERANCE
42
9,8
A 0,5
23
45°
30 15
(10 )
1(x 4,
4)
Option: make 3x screw holes by using drill pattern, drawing: 10 135 250.
1
STANDARD (6,2)
(B-70)
° 98
B 0,5
Option: make holes by using drill pattern, drawing: 10 135 220.
HINGE HOLES
20
73 0,2(x2)
C 0,5
FOR INFORMATION ONLY !
LOCK HOLE
Left and right version, right handed version drawn
19
16,6
80
D
133
1 1 Alu for Door Panel ITEM QTY DESCRIPTION
R4 (x4 )
28-12-2010 REVISION DATE SCALE:
PANEL HEIGHT TREATMENT STANDARD HINGE HOLES LOCK HOLE STANDARD HINGE HOLES LOCK HOLE
500 500 500 610 610 610
ART.CODE BRUT ALD1-500T00R/L ALD1-500T10R/L ALD1-500T20R/L ALD1-610T00R/L ALD1-610T10R/L ALD1-610T20R/L
ART.CODE ANODISED ALD1-500T01R/L ALD1-500T11R/L ALD1-500T21R/L ALD1-610T01R/L ALD1-610T11R/L ALD1-610T21R/L
ART.CODE WHITE RAL9016 ALD1-500T02R/L ALD1-500T12R/L ALD1-500T22R/L ALD1-610T02R/L ALD1-610T12R/L ALD1-610T22R/L
Dim.A 415,9 415,9 415,9 525,9 525,9 525,9
Dim.B 493 493 493 603 603 603
Dim.C 314 424 -
Dim.D 156,3 211,3
WEIGHT 0,307 0,306 0,293 0,375 0,373 0,357
kg kg kg kg kg kg
1:2
1033LD ARTICLE CODE
58 149 000 DRAWING NO.
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door bottom DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
Adjusted drawing numbers of drill patterns. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 310 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 149 310.idw
6,5 (x4 )
NOMINAL DIMENSION
43
Option: make holes by using drill pattern, drawing: 10 135 250.
A 0,5
,1(x 4)
23
30 15
9,8
4
1
8 A ( 3:7 ) SIDE VIEW OF MAIN LOCK HOLE
9 2
(32,1)
104 °
° 98
FOR INFORMATION ONLY ! 1
STANDARD
1
(6,2)
B 0 -1 Option: make holes by using drill pattern, drawing: 10 135 220.
HINGE HOLES
2) 7(x
20 38
2
46
B
Left and right version, right handed version drawn
1034CLM LOCK HOLE
1 1 Alu for Door Panel ITEM QTY DESCRIPTION
17,5
13,6
F+160,25
PANEL HEIGHT
) (x4 R4
F
196 ART.CODE BRUT ALD2-500T00R/L ALD2-500T10R/L ALD2-500T20R/L ALD2-500T30R/L ALD2-500T40R/L ALD2-610T00R/L ALD2-610T10R/L ALD2-610T20R/L ALD2-610T30R/L ALD2-610T40R/L
ART.CODE ANODISED ALD2-500T01R/L ALD2-500T11R/L ALD2-500T21R/L ALD2-500T31R/L ALD2-500T41R/L ALD2-610T01R/L ALD2-610T11R/L ALD2-610T21R/L ALD2-610T31R/L ALD2-610T41R/L
ART.CODE WHITE RAL9016 ALD2-500T02R/L ALD2-500T12R/L ALD2-500T22R/L ALD2-500T32R/L ALD2-500T42R/L ALD2-610T02R/L ALD2-610T12R/L ALD2-610T22R/L ALD2-610T32R/L ALD2-610T42R/L
Dim.A 444,5 444,5 444,5 444,5 444,5 554,5 554,5 554,5 554,5 554,5
Dim.B 492,5 492,5 492,5 492,5 492,5 602,5 602,5 602,5 602,5 602,5
Dim.C 314 424 -
Dim.D 156,3 211,3 -
Dim.E 103,2 158,2 -
Dim. F 139,9 194,9
WEIGHT 0,322 kg 0,321 kg 0,309 kg 0,295 kg 0,297 kg 0,393 kg 0,392 kg 0,377 kg 0,36 kg 0,362 kg
28-12-2010 02-12-2010 REVISION DATE SCALE:
1:2
1033LD ARTICLE CODE
58 149 000 DRAWING NO.
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door middle DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
Added 1034CLM LOCK HOLE to drawing. Changed toleration. Changed diemensions DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 320 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 149 320.idw
19
) (x4 R4
230
500 500 500 500 500 610 610 610 610 610
20
181,5
E
TREATMENT STANDARD HINGE HOLES LOCK HOLE MAIN LOCK HOLE 1034CLM LOCK HOLE STANDARD HINGE HOLES LOCK HOLE MAIN LOCK HOLE 1034CLM LOCK HOLE
70,5 92
NOMINAL DIMENSION
A
1
MAIN LOCK HOLE
2(x 4)
16,6
133
) (x4 R4
D
18
19
1
B ( 3:7 ) SIDE VIEW OF 1034CLM LOCK HOLE
LOCK HOLE
9
16,6
92 157
E+190
C 0,5
80
17
1
20
73 0,2(x2)
,5(x 4)
25
6
44
185,9
Option: make holes by using drill pattern, drawing: 10 135 260.
4
,1(x 2)
23
45°
10
1
STANDARD (206)
104 °
(32,1)
8
+ 284 - 01
HINGE HOLES
73(x2)
x4 )
Option: make holes by using drill pattern, drawing: 10 135 240.
20
6,5 (
FOR INFORMATION ONLY ! (89)
133
SCALE:
1:2
TREATMENT STANDARD HINGE HOLES LOCK HOLE
500/610 500/610 500/610
ART.CODE BRUT ALD3-300T00R/L ALD3-300T10R/L ALD3-300T20R/L
ART.CODE ANODISED ALD3-300T01R/L ALD3-300T11R/L ALD3-300T21R/L 1033LDC...
58 149 000 DRAWING NO.
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
(86) 28-12-2010 REVISION DATE
PANEL HEIGHT
1033LD ARTICLE CODE
TOLERANCE
ART.CODE WHITE RAL9016 ALD3-300T02R/L ALD3-300T12R/L ALD3-300T22R/L
WEIGHT 0,167 kg 0,166 kg 0,153 kg
Adjusted drawing numbers of drill patterns. Changed tolerance. DESCRIPTION GENERAL ROUGHNESS:
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door top DESCRIPTION DRAWING NO. panels ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 330 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-1 Safe Step\02-Tekeningen\Actieve map ipt, iam en idw\58 149 330.idw
65
1 1 Alu for Door Panel ITEM QTY DESCRIPTION
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
Left and right version, right handed version drawn
19
LOCK HOLE
R4 (x4 )
107
16,6
88
45
Option: make holes by using drill pattern, drawing: 10 135 060, 10 135 160 or 10 135 260.
10 (x2 ) 45° (x2)
A 0,5
4
,1(x 2)
1
(B-140)
28-12-2010 REVISION DATE SCALE:
1:2
TREATMENT STANDARD STANDARD
BRUT ALD4-863U00 ALD4-1073U00
ANODISED ALD4-863U01 ALD4-1073U01
ART.CODE WHITE RAL9016 ALD4-863U02 ALD4-1073U02
Dim.A 740,7 950,7
Dim.B 863 1073
WEIGHT 0,538 kg 0,656 kg
1033LD ARTICLE CODE
58 149 000 DRAWING NO.
3.2
PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 ... TREATMENT Safe Step door DESCRIPTION DRAWING NO. horizontal ... ARTICLE CODE REVISION DATE NAME JoFr DATE 11-11-2010 kg NETT WEIGHT ...
±0.1 ±0.1 ±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2
18-08-2009 REV. DATE REMARKS
Adjusted drawing number of drill pattern. DESCRIPTION GENERAL ROUGHNESS:
TOLERANCE
JoFr NAME
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-mK.
58 149 140 28-12-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A2 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-3 Meerpuntsslot loopdeur\02-Tekeningen\58 149 140.idw
1 1 Alu for Door Panel ITEM QTY DESCRIPTION
ART.CODE
NOMINAL DIMENSION
FOR INFORMATION ONLY !
B 0,5
ART.CODE
ISO 2768m 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
46
FOR INFORMATION ONLY !
ISO 2768c 0.5-3 >3-6 >6-30 >30-120 >120-400 >400-1000 >1000-2000 >2000-4000
NOMINAL DIMENSION
13(x2)
A
1
TOLERANCE
±0.2 ±0.3 ±0.5 ±0.8 ±1.2 ±2 ±3 ±4
1 1 Low threshold alu profile for seal ITEM QTY DESCRIPTION
REVISION DATE SCALE:
1:2
ART.CODE TREATMENT
BRUT ALB4-833U00 ALB4-1043U00
ART.CODE ANODISED ALB4-833U01 ALB4-1043U01
ART.CODE WHITE RAL9016 ALB4-833U02 ALB4-1043U02
Dim.A 833 mm 1043 mm
1033LB 58 168 000 10-09-2009 ARTICLE CODE DRAWING NO. REV. DATE REMARKS
DESCRIPTION GENERAL ROUGHNESS:
3.2
NAME PROJ.:
UNIT:
mm
MATERIAL Aluminium 6063 T6 TREATMENT Low threshold profile DRAWING NO. DESCRIPTION for seal with cut ... ARTICLE CODE REVISION DATE NAME JoFr DATE 29-11-2010 kg NETT WEIGHT ...
TOLERANCES UNLESS OTHERWISE STATED Acc. TO ISO 2768-cK.
58 168 500 29-11-2010 This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever, is not permitted without written authority from the proprietors.
WEIGHT VOLUME AREA
FORM.:
A3 - kg/m - mm³ - mm²
E:\VaultWorkspace\R&D\Projecten\A058-1 Safe Step\02-Tekeningen\Actieve map ipt, iam en idw\58 168 500.idw
35(x2)
47
SafeStep
速
Pass door System for fingersafe panels
TIPS AND TRICKS manually making cutaway in low threshold
48
SAWING
≈ 100
WIGGLE
49
SAWING ≈ 100
WIGGLE
50
51
guidelines GB 速
rev.0 Februari-11
SafeStep
Pass door System for fingersafe panels
INSTALLATION GUIDE installation conditions
1
2
3
4
5
6
The threshold has to lay level. Floor not level? Use a box beam to create a level surface to build up the door.
7
Suited panels.
Kingspan/ Epco R-series
Metecno
Thyssen
8
≈ 2273
LOCK SIDE
This manual is based on these dimensions:
≈ 840
min. 700 max. 2100 (lock side)
E (with end caps)
9
This manual is based on a RIGHT HANDED DOOR.
RIGHT HANDED DOOR
LEFT HANDED DOOR
INSIDE
INSIDE
OUTSIDE
OUTSIDE
10
SafeStep
速
Pass door System for fingersafe panels
INSTALLATION GUIDE assembling
11
CONFIGURATION OF DOOR PROFILES* KIT right handed door
KIT left handed door
See SafeStep速 Production Guidelines for profile details.
12
Ø3
1Nm
Using Multi Point Lock? See SafeStep® Multi Point Lock Guidelines.
13
1034HI
14
Align 1034HI in middle of hole.
15
Tip: use a filling plate to align. 3
16
17
18
19
1041L
1035L See SafeStep速 Production Guidelines for producing 1041L.
20
C section. B3 section. B2 section. B1 section. A section. 21
DSU
827+ 27 = 854
1033LR 22
C B3 B2 B1 A See Configuration of Door Profiles, page 12. 23
Aligned with panel.
Also see Tips and Tricks 2
24
C
90°
90° 840 ±0,5
90°
90°
B3, B2, B1, A 25
C
Ø 4,1
4,0
B3 B2 B1 A 26
Ă˜4 1054-...
C 2 80PS
See Production Guidelines for length 80PS.
27
E
C
B3
B2
B1
A (E-840)/2) 28
Ø4 1054-...
C
B3 B2
B1
A 29
(E)
A 840 Âą0,5
A
1041L
Push end cap behind 1041LE end piece or cut the end cap. 30
≈ 300
31
C B3 B2 B1 A 32
Ø4 1054-... 840 ±0,5
33
Ø4
1054-...
450HLS
34
1033A2 Ø 4,1
35
A
833 Âą0,5 See Configuration of Door Profiles, page 12. 36
Aligned with panel.
Also see Tips and Tricks 2
37
Ø 4,1
4,0
A
1033A1
38
90°
90°
Ø 4,1
4,0 90°
90°
39
Ø 4,1 1033LBR 4,0
A
EFU (1033LB) Also see Tips and Tricks 1
40
Open 90째 to mount.
A 41
Distance plate 0 20
10
A
3 .5
SCALE:
GENERAL ROUGHNESS:
MATERIAL TREATMENT DESCRIPTION
PROJ.:
UNIT:
mm
TOLERANCES UNLESS OTHERWISE STATED Acc. TO .
Nylon-6/6
Safe Step vulplaatje 3,5mm DRAWING NO.
ARTICLE CODE
NAME DATE
- 0+ 0.00 .5 0
REVISION DATE
jofr 30-3-2009
This drawing is property of FlexiForce, and contains confidentional information. All rights strictly reserved. Reproduction, use for production purposes,issue to third parties, in any form whatever,
WEIGHT VOLUME
42
FO
A
k m
43
See Configuration of Door Profiles (page 12).
B3
833 ±0,5
B2
833 ±0,5
B1
833 ±0,5 44
Aligned with panel.
Also see Tips and Tricks 2
45
Ø 4,1
4,0
46
Open 90째 to mount.
B1
47
Distance plate 0 20
10
3 .5
- 0+ 0.00 .5 0
48
49
Ø4 1054-...
450HLS
50
B3 B2
Open 90째 to mount.
51
Ă˜4 1054-...
450HLS
Distance plate 52
C
833 Âą0,5
See Configuration of Door Profiles (page 12). 53
1033A1
C
Ø 4,1
4,0 54
90°
90°
90°
90°
Ø 4,1
4,0 55
C Open 90째 to mount.
56
Ă˜4 1054-...
450HLS
Distance plate 57
Length is equal to the height of the passdoor.
B
A
1033LR 58
Apply when E ≼ 3000 1033B
59
SafeStep
速
Pass door System for fingersafe panels
OPTIONS 60
RAIN PROFILE
1034RN 61
DOOR CLOSER 7
1034BASE 62
1034FL
63
SafeStep
速
Pass door System for fingersafe panels
TIPS AND TRICKS 64
1. FIXING SEAL
1) cut
2) push until seal is fixed.
65
2. EXTRA PROFILE POSITION CHECK
Kingspan/Epco: (15,5) Metecno: (13,4) Thyssen: (21,4)
Kingspan/Epco: (9,5) Metecno: (7,9) Thyssen: (7,2)
66
1
4
6
Kingspan/ Epco R-series
Metecno
Thyssen
67
3. ALTERNATIVE POSITIONING CASING PROFILES To be used during steps on page 24-35.
1) Place profiles without fixing.
3) Fix profiles.
2) Place frame and let the profiles connect to it.
68
4. DISMANTLING
WHEN DISMANTLING FOR INSTALLATION ON SITE KEEP INTERNAL HINGES CONNECTED. 69
SafeStep
速
Pass door System for fingersafe panels
MAINTENANCE 70
MAINTENANCE SAVE STEP® PASS DOOR The Save Step pass door should be maintained and checked regularly to ensure safe operation and use. GENERAL 1. The maintenance may only be carried out by qualified overhead door mechanics. 2. Replacement of broken or weared components should always be done by qualified overhead door mechanics. 3 When checking the door, always disconnect the electrical main power supply. Make sure that it is blocked against re-engaging without you knowing it. REGULAR MAINTENANCE After installation 1. Grease the hinges 450HLS. MECHANIC 2. Check if the side seals of the overhead door stay in place while opening and closing the overhead door. MECHANIC 3. Clean the aluminum profiles with “Eloxal” aluminium cleaner. MECHANIC / USER Every year (or after every 1500 cycles) 1. Check the fixation of the lock handle. MECHANIC 2. Grease the hinges 450HLS. MECHANIC 3. Check the fixation of the 450HLS hinges. MECHANIC 4. Grease the door pusher. MECHANIC 5. Check if all the screws in the 80PS strut are still fixed. MECHANIC 6. Check if the side seals of the overhead door are still in place. MECHANIC 7. Check the fixation of the threshold sticker 1041LT. MECHANIC After every 10000 cycles 1. Replace the 1033LBR rubber between the door and the threshold.
MECHANIC
71
guidelines GB
rev.0 Februari-11
Multi Point Lock For Safe Step pass door system 速
1
This manual is based on a 1034LK1R lock kit with an additional lock 1034LIL500R and has a RIGHT HANDED OPENING.
LOCK KITS 1034LK1R
Lock kit for 3x500mm sections plus top section.
1034LK1L
Lock kit for 3x500mm sections plus top section.
1034LK2R
Lock kit for 1x610mm and 2x500mm sections plus top section.
1034LK2L
Lock kit for 1x610mm and 2x500mm sections plus top section.
1034LK3R
Lock kit for 2x610mm and 1x500mm sections plus top section.
1034LK3L
Lock kit for 2x610mm and 1x500mm sections plus top section.
1034LK4R
Lock kit for 3x610mm sections plus top section.
1034LK4L
Lock kit for 3x610mm sections plus top section.
Right hand opening
Contains articles: 1034LB500R, 1034LC500R, 1034LU500R, 1034LT-R Left hand opening
Contains articles: 1034LB500L, 1034LC500L, 1034LU500L, 1034LT-L Right hand opening
Contains articles: 1034LB610R, 1034LC500R, 1034LU500R, 1034LT-R Left hand opening
Contains articles: 1034LB610L, 1034LC500L, 1034LU500L, 1034LT-L Right hand opening
Contains articles: 1034LB610R, 1034LC610R, 1034LU500R, 1034LT-R Left hand opening
Contains articles: 1034LB610L, 1034LC610L, 1034LU500L, 1034LT-L Right hand opening
Contains articles: 1034LB610R, 1034LC610R, 1034LU610R, 1034LT-R Left hand opening
Contains articles: 1034LB610L, 1034LC610L, 1034LU610L, 1034LT-L
2
ADDITIONAL LOCKS 1034LIL500R 1034LIL500L 1034LIL610R 1034LIL610L
Lock for lower intermediate section 500mm.
Right hand opening
Lock for lower intermediate section 500mm.
Left hand opening
Lock for lower intermediate section 610mm.
Right hand opening
Lock for lower intermediate section 610mm.
Left hand opening
ADDITIONAL CAPS FOR LOCK KITS 1034KLCAPS-R 1034KLCAPS-L 1034MLCAPS-R 1034MLCAPS-L 1034TLCAPS-R 1034TLCAPS-L
Left hand opening
Set of 3 caps for Kingspan and Epco panels.
Right hand opening
Set of 3 caps for Kingspan and Epco panels.
Left hand opening
Set of 3 caps for Metecno panels.
Right hand opening
Set of 3 caps for Metecno panels.
Left hand opening
Set of 3 caps for Thyssen panels.
Right hand opening
Set of 3 caps for Thyssen panels.
Left hand opening
Right hand opening
3
DRAWINGS FOR MAKING LOCK HOLES IN THE PROFILES POSITION BRAND DRAWINGS Top panel Kingspan/Epco 58 149 130 Metecno 58 149 230 Thyssen 58 149 330
Middle panel Kingspan/Epco 58 149 120 Metecno 58 149 220 Thyssen 58 149 320
Bottom panel Kingspan/Epco 58 149 110 Metecno 58 149 210 Thyssen 58 149 310
The drawings are available on the Flexi Force website or ask your account manager for them.
4
5
6
7
8
Ă˜ 3mm
9
Screw length: 19mm
1 Nm
2 Nm
10
11
12
13
GAP: 1,5mm
14
Ă˜ 3mm
15
Screw length: 22mm
3 Nm
16
1033B
0-3 mm 2 Nm 1
Ø 3mm 2
2 Nm 3
17
18
If using intermediate locks: 1034LIL500R, 1034LIL500L, 1034LIL610R or 1034LIL610L, mount it underneath main lock.
Repeat steps of pages 5-10.
Check: 0,5-2 mm
19
Bottom lock: 1034LB500R 1034LB500L 1034LB610R or 1034LB610L.
Repeat steps of pages 5-10.
Check: 0,5-2 mm
20
Above main lock: 1034LU500R 1034LU500L 1034LU610R or 1034LU610L.
Repeat steps of pages 5-10.
Check: 0,5-2 mm
21
Top lock: 1034LT-R or 1034LT-L.
Repeat steps of pages 5-10.
Check: 0,5-2 mm
22
23
GAP: 3,5 mm
24
Ă˜ 3mm
25
Screw length: 22mm
26
Repeat steps of pages 23-26.
27
Repeat steps of pages 23-26.
28
29
30