Advertorial
Auer Metallprofile (D)
AUER METALLPROFILE, THE PROFILE MANUFACTURER FROM AUE FROM SAXONY, HAS ALSO EXPANDED ITS RANGE IN 2022
As a novelty, the Auer stainless steel specialists have transferred the successful knob embossing system to a trowel-in stainless steel stair nosing (523) with 2 rows of 5 mm knobs for butting 6 mm or 8 mm coverings. The focus is particularly on the closed stainless steel surface and the associated easy cleaning, as well as the slip resistance of a stainless steel stair nosing. One of the many areas of application for this profile can be seen in disinfection and other chemically problematic areas. For a higher resistance, this profile can also be made of stainless steel V4A. Matching side caps or other heights can be produced on request. With the new ungrooved 30x40 corner profiles, you have many new creative room design options. For profiles made of aluminum, 2 mm, 2.5mm, 3 mm and 5 mm coverings are abutted from two sides, a small decorative edge remains. These profiles are also available as
8
Floor Forum International 121
a notched version for bending. Radii over 40 cm can be bent on site. AMP pre-bends smaller radii according to a radius specification or template. On request, finely welded corners can also be made. In 2022, Auer's LED area has been upgraded again - an LED lighting strip with 500 LEDs per meter and thus continuous lighting has been added. The previous LED range includes two LED stair nosings and two LED skirting boards 60x15 mm and 100x15 mm, for direct and indirect lighting. In addition to their functional elegance, these impress with their simplicity and their spacious cable duct, which enables accurate, neat installation. The Auer team also offers various accessories, individually as components or, depending on the profile, as a readyto-screw all-round carefree package. These LED profiles can either be equipped with your own 8 mm wide LED lighting strips or with the lighting strips from AMP. In addition to subtle (10 LED/m) and
