Essentra Catálogo 15

PNEUMATICS & HYDRAULICS

922

Air & Hydraulic Pressure Gauges 959 Air Cylinders & Accessories 945 - 950 Air Hoses & Hose Accessories 941 - 944 Air Products 951 - 957 Air Tools & Accessories 937 - 940 Hose & Pipe Clamps, Channels & Straps 927 - 936 Hose Protection 924 - 926 Hydraulic Cylinders & Accessories 960 - 961 Hydraulic Grease Fittings 958 Level Indicators & Breather Caps 962 - 963 Manifolds 965 O-Rings 964 923

HOSE PROTECTION SGX Series TECTORGUARD™ Heavy & Medium Duty Hose Guards

Pitch

Specifications: s Material: High-Density Polyethylene s Color: Refer to Chart

Wall Thickness

To Fit

Features: s TECTORGUARD™ protects against cuts, abrasions, crushing and ultraviolet rays that regularly destroy your expensive hoses s Easy and safe to install either before or after the hose assembly is mounted s The heavy-duty, double-beveled design on the inside and outside edge prevents snagging or cutting during installation Heavy Duty - Heavy Abrasion To Fit

Wall Thickness

Pitch

Roll Length

Black Item No.

Yellow Item No.

In

In

mm

In

mm

Ft

m

SGX16HA SGX20HA SGX25HA SGX32HA SGX39HA SGX45HA SGX50HA SGX59HA SGX75HA SGX90HA SGX102HA SGX114HA SGX165HA

SGX25HB SGX32HB SGX39HB SGX45HB SGX75HB SGX90HC SGX102HB SGX114HB SGX165HB

0.492 0.668 0.750 1.014 1.250 1.500 1.600 2.000 2.457 3.064 3.500 4.000 6.000

0.069 0.086 0.110 0.118 0.132 0.140 0.150 0.160 0.209 0.218 0.250 0.250 0.250

1.75 2.18 2.79 2.99 3.35 3.55 3.81 4.06 5.30 5.53 6.35 6.35 6.35

0.490 0.610 0.950 1.040 1.350 1.500 1.530 1.600 1.610 1.970 1.950 2.100 4.000

12.45 15.49 24.13 26.42 34.29 38.10 38.68 40.64 40.89 50.04 49.53 53.34 101.60

100 100 100 100 100 100 50 100 50 35 25 20 15

30.48 30.48 30.48 30.48 30.48 30.48 15.24 30.48 15.24 10.66 7.62 6.09 4.57

Medium Duty - Flexible with Medium Abrasion To Fit

Wall Thickness

Pitch

Roll Length

Item No.

In

In

mm

In

mm

Color

Ft

m

SGX16MA SGX20MA SGX25MA SGX32MA SGX39MA SGX50MA SGX75MA SGX90MA

0.492 0.668 0.750 1.014 1.250 1.600 2.457 3.064

0.045 0.052 0.062 0.071 0.080 0.090 0.125 0.131

1.14 1.32 1.57 1.80 2.03 2.28 3.17 3.32

0.490 0.610 0.800 1.040 1.350 1.530 1.610 1.970

12.45 15.49 20.32 26.42 34.29 38.86 40.89 50.04

Black Black Black Black Black Black Black Black

100 100 100 100 100 50 50 35

30.48 30.48 30.48 30.48 30.48 15.24 15.24 10.66

SGX FRAS Series SPIRALGUARD™ Flame Retardant Antistatic Series

Specifications: s Material: High-Density Polyethylene s Color: Dark Gray

ETY MINE SAF ED APPROV

Features: s Exceptional anti-crushing performance s High abrasion resistance s Good resistance to UV rays s Reduces risk of industrial injury s Suitable for wrapping single or multiple hoses s Proven in arduous conditions s Suitable for the protection of most types of hydraulic, pneumatic and industrial hose assemblies across a wide range of industries: mining, quarrying, drilling, tunnelling, forestry, welding, manufacturing, agricultural, automotive, marine sub-sea, offshore oil and gas construction

Pitch

To Fit

To Fit

Approvals and Certifications: s Tested and approved in accordance with the former British Coal specification 182:1986, satisfying the requirements of the non-metallics scheme for use underground s Tested and approved by Mine Safety Laboratory, Department of Mineral Resources NSW to AS2660 FRAS Compliance – 1991 International Standard: ISO6805 s Patented product US6286557B1

924

Wall Thickness

Wall Thickness

Pitch

Roll Length

Item No.

In

In

mm

In

mm

Ft

m

SGX16FRASA SGX20FRASA SGX25FRASA SGX32FRASA SGX40FRASA SGX50FRASA SGX63FRASA SGX75FRASA SGX90FRASA SGX110FRASA

0.472 0.591 0.748 0.906 1.201 1.496 1.850 2.402 2.776 3.307

0.089 0.098 0.108 0.138 0.167 0.167 0.217 0.236 0.276 0.295

2.25 2.50 2.75 3.50 4.25 4.25 5.50 6.00 7.00 7.50

0.510 0.610 0.750 0.900 1.140 1.420 1.550 1.730 2.000 2.200

12.95 15.49 19.05 22.86 28.96 36.07 39.37 43.94 50.80 55.88

65.62 65.62 65.62 65.62 65.62 65.62 65.62 65.62 65.62 32.81

20 20 20 20 20 20 20 20 20 10

HOSE PROTECTION TFG Series Lightweight & Flexible

Pitch

Wall Thickness

To Fit

Specifications: s Material: Cellulose Acetate s Color: Black Features: s Unique profile will cover much more hose surface during a bending process than any other wrap s The inner core assures flexibility while the external profile assures resistance to abrasion and to electrical conductivity s Lightweight and flexible s Crush resistant s Excellent memory Item No.

To Fit In

TFG08HA TFG12HA TFG16HA TFG20HA TFG25HA TFG32HA TFG35HA TFG39HA TFG44HA

0.250 0.370 0.500 0.620 0.750 1.000 1.100 1.250 1.380

Wall Thickness In mm

0.050 0.050 0.070 0.070 0.090 0.090 0.090 0.090 0.090

1.27 1.27 1.78 1.78 2.29 2.29 2.29 2.29 2.29

Pitch In

mm

0.250 0.250 0.500 0.500 0.620 0.620 1.000 1.000 1.000

6.35 6.35 12.70 12.70 15.74 15.74 25.40 25.40 25.40

Roll Length Ft m

40 40 40 40 40 40 40 40 40

12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19 12.19

Item No.

To Fit In

TFG45HA TFG50HA TFG56HA TFG59HA TFG82HA TFG90HA TFG95HA TFG102HA TFG114HA

1.500 1.600 1.750 2.000 2.560 3.000 3.150 3.500 4.000

Wall Thickness In mm

0.090 0.090 0.110 0.130 0.150 0.150 0.150 0.150 0.150

Pitch

2.29 2.29 2.79 3.30 3.81 3.81 3.81 3.81 3.81

Roll Length Ft m

In

mm

1.000 1.000 1.400 1.400 1.400 1.400 1.400 1.000 1.260

25.40 25.40 35.56 35.56 35.56 35.56 35.56 25.40 32.00

40 40 40 40 25 25 25 25 25

12.19 12.19 12.19 12.19 7.62 7.62 7.62 7.62 7.62

THP Series Point of Contact Protectors

Specifications: s Material: PVC s Color: Refer to Chart Features: s Protects hose and wire abrasion caused by points of contact wear with frames or other abrasive surfaces s Material is very durable and has a high wear factor s Molded in grooves prevent the slipping and wear of cable ties s Easy to assemble and remove s Typically used on hydraulic hoses, fuel and oil lines, brake systems, wiring harnesses and battery cables s The THPSD4B is to be used on 1/2" hoses and smaller since it is designed with a smaller radius

Black

Orange

Yellow

Length In

Pack Qty.

Bulk Pack Qty.

THPSD4B THP4B THP6B THP8B THP10B THP12B

THP4A THP6A THP8A THP10A THP12A

THP4C THP6C THP8C THP10C THP12C

4 4 6 8 10 12

1 1 1 1 1 1

50 50 50 50 10 10

Item No.

Each THP Assembly Requires 3 Ties

Specifications: s Material: UL Approved 94V-2 Nylon 6/6 s Color: Refer to Chart s Service Temperature: –40°F to 185°F (–40°C to 85°C) Features: s Complies with MS-3367 and MIL-S-23190E s RoHS Compliant Item No. Natural

Black

CT025A

Green

CT025B

CT025G

Length

Red

Yellow

CT025K

CT025Y

Maximum Bundle Dia.

Width

Blue

CT025L

Silver

CT025S

Minimum Tensile Strength

In

mm

In

mm

In

mm

Lbs

kgs

Classification

Bulk Pack Qty.

11-7/8

300

0.189

4.8

3.350

85

50

222

Standard

100

925

HOSE PROTECTION TQS Series Quick Assemble Hose Sleeves

Features: s Excellent for use in the field or for applications where the winding of spiral-formed products is very difficult s Resistant to heat, ozone and abrasion s Special innovative Python® hook-and-loop design closure promotes a quick and easy bundling of hose groups s Close quarter operator protection from hose failures s Easy assembly and removal s Containment of hoses and tighter bundling s Professional appearance – enhances the aesthetics of your equipment

Specifications: s Material: Nylon with a Urethane Coating on one Side s Color: Black Bundle O.D. In mm

Item No.

TQS2A TQS3A TQS4A TQS5A

2 3 4 5

In

50.80 76.20 101.60 127.00

Flat Width mm

7.750 10.900 14.000 17.250

Roll Length Ft m

196.85 276.86 355.60 438.15

150 150 150 150

Bundle O.D. In mm

Item No.

TQS6A TQS7A TQS8A

45.72 45.72 45.72 45.72

6 7 8

152.40 177.80 203.20

In

Flat Width mm

20.380 23.500 26.620

Roll Length Ft m

517.65 596.90 676.15

150 150 150

45.72 45.72 45.72

TSL Series Mining Safety Approved Sleeves

ETY MINE SAF ED APPROV

Specifications: s Material: Polyamide 6 Yarn s Color: Black

Approvals and Certifications: s M.S.H.A. Approval #M.S.H.A. IC-234/0 s Meets FED-STD-191 test method 5309 for abrasion resistance s Meets ASTM D6770 for abrasion resistance of textile webbing Item No.

TSL067A TSL079A TSL091A TSL098A TSL106A TSL122A TSL142A TSL157A

Min Round I.D.

Max Round

External Flattened Width

Roll Length

Features: s Protects people, environment and machinery against any possible hydraulic hose oil leakage or spills s Very dense, yet not bulky s Optimum UV and abrasion protection s High degree of burst resistance s Effective in reducing the concentrated stream of pinhole leaks s Good leakage containment

In

mm

In

mm

In

mm

Ft

m

Item No.

0.680 0.790 0.910 0.980 1.060 1.220 1.420 1.570

17.27 20.06 23.11 24.89 26.92 30.98 36.06 39.87

0.840 0.950 1.030 1.100 1.180 1.340 1.540 1.730

21.34 24.13 26.16 27.94 29.97 34.04 39.12 43.94

1.180 1.340 1.540 1.650 1.770 2.050 2.390 2.600

29.97 34.03 39.11 41.91 44.95 52.07 60.71 66.04

300 300 300 300 300 300 300 300

91.44 91.44 91.44 91.44 91.44 91.44 91.44 91.44

TSL173A TSL185A TSL217A TSL236A TSL260A TSL287A TSL366A TSL441A

Min Round I.D.

Max Round

External Flattened Width

Roll Length

In

mm

In

mm

In

mm

Ft

m

1.730 1.850 2.190 2.380 2.620 2.880 3.660 4.410

43.94 46.99 55.63 60.45 66.54 73.15 92.96 112.01

1.890 2.010 2.350 2.540 2.780 3.040 3.820 4.570

48.01 51.05 59.69 64.52 70.61 77.22 97.03 116.08

2.830 3.030 3.500 3.820 4.210 4.650 5.870 7.050

71.88 76.96 88.90 97.02 106.93 118.11 149.09 179.07

300 300 300 300 300 300 300 300

91.44 91.44 91.44 91.44 91.44 91.44 91.44 91.44

FPS Series Fire Protection Sleeve

Specifications: s Material: Outer Sleeve - Proprietary Iron Oxide Red Silicone Rubber Inner Sleeve - Knitted high bulk glass fiber

Item No.

I.D.

Roll Length Ft

FPS1/4A FPS5/16A FPS3/8A FPS1/2A FPS5/8A FPS3/4A FPS7/8A FPS1A

1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8" 1"

50 50 50 50 50 50 50 50

926

Item No.

I.D.

Roll Length Ft

FPS1-1/4A FPS1-1/2A FPS2A FPS2-1/2A FPS3A FPS3-1/2A FPS4A

1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4"

50 50 50 50 50 50 50

Features: s Has excellent elasticity great for protecting or bundling hoses, tubes, and cables in a variety of hostile environments s The insulation properties provide close quartered personnel with effective protection against burns from hot hoses and reduce heat energy loss s Withstands intense radiant heat and flame – Continuous exposure up to 500°F(260°C) – 15-20 minutes up to 2000°F(1090°C) – 15-30 seconds up to 3000°F(1650°C) s Immediately sheds splash – Withstands repeated exposures to molten steel, molten aluminum and molten glass up to 3000°F(1650°C)

HOSE & PIPE CLAMPS SPN/SPNW Steel Clamp with Rubber Cushion

Provides electrical insulation and vibration absorption. Ideal for long-life applications. .500” Width s Material: Cold Rolled Steel, Zinc Electroplated s Cushion: TPE s Color: Steel with Black Cushion Item No.

“D” Holding Ø

“E” Ref.

Ø”H” Hole

“A” Width Ref.

“B”

“C”

Pack Qty.

Bulk Qty. Pack

SPN-3 SPN-4 SPN-5 SPN-6 SPN-7 SPN-8 SPN-9 SPN-10 SPN-11 SPN-12 SPN-14 SPN-16 SPN-18 SPN-20

3/16 (4.8) 1/4 (6.4) 5/16 (7.9) 3/8 (9.5) 7/16 (11.1) 1/2 (12.7) 9/16 (14.3) 5/8 (15.9) 11/16 (17.5) 3/4 (19.1) 7/8 (22.2) 1 (25.4) 1-1/8 (28.6) 1-1/4 (31.8)

.50 (12.7) .53 (13.5) .56 (14.2) .59 (15) .62 (15.7) .65 (16.5) .75 (19.1) .78 (19.8) .81 (20.6) .84 (21.3) .90 (22.9) .96 (24.4) 1.05 (26.7) 1.11 (28.2)

.266 (6.7) .266 (6.7) .266 (6.7) .266 (6.7) .266 (6.7) .266 (6.7) .266 (6.7) .266 (6.7) .266 (6.7) .266 (6.7) .266 (6.7) .266 (6.7) .266 (6.7) .266 (6.7)

.650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5) .650 (16.5)

1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7)

.26 (6.6) .26 (6.6) .26 (6.6) .26 (6.6) .26 (6.6) .26 (6.6) .26 (6.6) .26 (6.6) .26 (6.6) .26 (6.6) .26 (6.6) .26 (6.6) .26 (6.6) .26 (6.6)

1 1 1 1 1 1 1 1 1 1 1 1 1 1

500 500 500 500 500 500 500 500 500 500 100 100 100 100

.625” Width s Material: Cold Rolled Steel, Zinc Electroplated, Cushion: Neoprene s Color: Steel with Black Cushion Item No.

“D” Holding Ø

“E” Ref.

Ø”H” Hole

“A” Width Ref.

“B”

“C”

Pack Qty.

Bulk Pack Qty.

SPNW-4 SPNW-5 SPNW-6 SPNW-7 SPNW-8 SPNW-10 SPNW-11 SPNW-14 SPNW-16 SPNW-20

1/4 (6.4) 5/16 (7.9) 3/8 (9.5) 7/16 (11.1) 1/2 (12.7) 5/8 (15.9) 11/16 (17.5) 7/8 (22.2) 1 (25.4) 1-1/4 (31.8)

.53 (13.5) .56 (14.2) .59 (15) .62 (15.7) .65 (16.5) .78 (19.8) .81 (20.6) .90 (22.9) .96 (24.4) 1.11 (28.2)

.406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3) .406 (10.3)

3/4 (19.1) 3/4 (19.1) 3/4 (19.1) 3/4 (19.1) 3/4 (19.1) 3/4 (19.1) 3/4 (19.1) 3/4 (19.1) 3/4 (19.1) 3/4 (19.1)

5/8 (15.9) 5/8 (15.9) 5/8 (15.9) 5/8 (15.9) 5/8 (15.9) 5/8 (15.9) 5/8 (15.9) 5/8 (15.9) 5/8 (15.9) 5/8 (15.9)

5/16 (7.9) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9) 5/16 (7.9)

1 1 1 1 1 1 1 1 1 1

100 100 100 100 100 100 100 100 100 100

Loop Clamps SPN Series Steel and Stainless

L

.26" D

.50"

F

.265"

s s s s

Light to medium duty steel clamp EPDM cushion for electrical insulation and vibration absorption Steel clamps are zinc electroplated for corrosion resistance Temperature range -50 degrees Fahrenheit to +275 degrees Fahrenheit

Loop Clamps SPW Series Steel

Steel

Stainless

Item No.

Item No.

ZS-404 ZS-406 ZS-408 ZS-410 ZS-412 ZS-414 ZS-416 ZS-418 ZS-420 ZS-422 ZS-424 ZS-426 ZS-428 ZS-430 ZS-432

s s s s

F Width .75" L

.406"

ZS-434 ZS-436 — ZS-438 — ZS-440 — ZS-442 — ZS-444 ZS-446 ZS-448 ZS-450 ZS-452 —

D

3

⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 11⁄8 11⁄4 11⁄2

.188 .250 .312 .375 .438 .500 .562 .625 .688 .750 .875 1.000 1.125 1.250 1.500

16 1 4

5

16 3 8 7 16 1 2 9 16 5 8 11 16 3 4 7 8

F

Pack Qty.

.032 .032 .032 .032 .032 .032 .032 .032 .032 .032 .032 .032 .032 .032 .032

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

L 3

⁄8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 17⁄32 13

32 7 16 15 32 1 2 17 32 9 16 19 32 5 8 3 4 13 16 7 8 15 16

Light to medium duty steel clamp EPDM cushion for electrical insulation and vibration absorption Steel clamps are zinc electroplated for corrosion resistance Temperature range -50 degrees Fahrenheit to +275 degrees Fahrenheit Item No.

D

Size

ZS-454 ZS-456 ZS-458 ZS-460 ZS-462 ZS-464 ZS-466 ZS-468 ZS-470 ZS-472

Size 1

⁄4 3 ⁄8 1 ⁄2 5 ⁄8 3 ⁄4 1 11⁄8 11⁄4 11⁄2 2

D

L

F

Pack Qty.

.250 .375 .500 .625 .750 1.000 1.125 1.250 1.500 2

.656 .718 .781 .843 .906 1.031 1.093 1.000 1.218 1.468

.031 .031 .031 .031 .031 .031 .050 .032 .032 .040

1 1 1 1 1 1 1 1 1 1

927

HOSE & PIPE CLAMPS Loop Clamps SVW Series Steel

Loop Clamps SVN Series Steel .312"

.312"

PVC COATED

PVC COATED

F

F

L

.281"

L

.5"

D

Size 3

ZS-474 ZS-476 ZS-478 ZS-480 ZS-482 ZS-484 ZS-486 ZS-488 ZS-490 ZS-492 ZS-494

⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 11⁄8 16 1 4 5 16 3 8 1 2 9 16 5 8 3 4 7 8

D

L

F

Pack Qty.

.187 .250 .312 .375 .500 .562 .625 .750 .875 1.000 1.125

.500 .531 .562 .593 .656 .687 .718 .781 .843 .906 .968

.032 .032 .032 .032 .048 .048 .048 .048 .048 .048 .048

1 1 1 1 1 1 1 1 1 1 1

Loop Clamps LVZ Series Steel

PVC COATED

s Medium duty steel clamp that can be slipped over a tube or wire and closed with a bolt at assembly. Holes provide easy alignment. Its pre-developed shape allows for proper closing and excellent fit of the clamp s Galvanized steel s PVC coated, black color s Temperature range -25 degrees Fahrenheit to +160 degrees Fahrenheit Item No.

D

L

F

Pack Qty.

.250 .375 .500 .562 .625 .750 .812 .875 .937 1.000 1.050 1.125

.656 .718 .781 .812 .843 .906 .937 .968 1.000 1.031 1.062 1.092

.032 .032 .048 .048 .048 .048 .048 .048 .048 .048 .048 .048

1 1 1 1 1 1 1 1 1 1 1 1

Size 1

ZS-496 ZS-498 ZS-500 ZS-502 ZS-504 ZS-506 ZS-508 ZS-510 ZS-512 ZS-514 ZS-516 ZS-518

⁄4 ⁄8 ⁄2 ⁄16 5 ⁄8 3 ⁄4 13 ⁄16 7 ⁄8 15 ⁄16 1 11⁄16 11⁄8

Item No.

Size

D

L

F

Pack Qty.

ZS-520 ZS-522 ZS-524 ZS-526 ZS-528 ZS-530 ZS-532 ZS-534 ZS-536 ZS-538 ZS-540 ZS-542 ZS-544 ZS-546 ZS-548 ZS-550

11⁄8 13⁄16 11⁄4 15⁄16 11⁄2 19⁄16 13⁄4 113⁄16 2 21⁄16 21⁄4 21⁄2 25⁄8 23⁄4 27⁄8 39⁄16

1.130 1.190 1.250 1.310 1.500 1.560 1.750 1.810 2.000 2.060 2.250 2.500 2.630 2.750 2.880 3.560

1.218 1.250 1.281 1.312 1.406 1.437 1.531 1.562 1.687 1.718 1.812 1.937 2.000 2.062 2.125 2.437

.048 .048 .048 .048 .048 .048 .048 .048 .048 .048 .048 .048 .048 .048 .048 .048

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

3 1

9

.562" F L

.531"

1"

D

s s s s

.75"

D

s Medium duty steel clamp that can be slipped over a tube or wire and closed with a bolt at assembly. Holes provide easy alignment. Its pre-developed shape allows for proper closing and excellent fit of the clamp. s Galvanized steel s PVC coated, black color s Temperature range -25 degrees Fahrenheit to +160 degrees Fahrenheit Item No.

.406"

Heavy duty steel clamp Galvanized steel PVC coated, black color Temperature range -25 degrees Fahrenheit to +160 degrees Fahrenheit

Loop Clamps HVN Series Steel

.5"

.281"

PVC COATING

.048"

W E

C B L D

Item No.

ZS-552 ZS-554 ZS-556 ZS-558 ZS-560 ZS-562 ZS-564

Size 1

⁄4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄

5

16 3 8 1 2 9 16 5 8 3 4

D

L

E

B

C

.250 .312 .375 .500 .562 .625 .750

.500 .531 .562 .687 .750 .812 .875

.250 .312 .312 .312 .312 .312 .312

.250 .312 .375 .500 .562 .625 .750

.188 .218 .281 .343 .437 .406 .468

W 1

⁄2 ⁄8 ⁄8 5 ⁄8 5 ⁄8 5 ⁄8 5 ⁄8 5 5

Pack Qty.

1 1 1 1 1 1 1

s Black vinyl plastic coated (PVC) s Galvanized steel for corrosion resistance s Temperature range -25 degrees Fahrenheit to +160 degrees Fahrenheit

Loop Clamps HSN Series

E

.281”

.5” .048”

W

C B

L Item No.

s Stainless steel 1⁄2" wide s Type 301 or 304

928

ZS-566 ZS-568 ZS-570 ZS-572 ZS-574 ZS-576 ZS-578

Size 1

⁄4 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄

5

16 3 8 1 2 9 16 5 8 3 4

D

.250 .312 .375 .500 .562 .625 .750

L

.500 .531 .562 .687 .750 .812 .875

E

.250 .312 .312 .312 .312 .312 .312

B

.250 .312 .375 .500 .562 .625 .750

D

C

.188 .218 .281 .343 .437 .406 .468

W 1

⁄2 ⁄8 ⁄8 5 ⁄8 5 ⁄8 5 ⁄8 5 ⁄8 5 5

Pack Qty.

1 1 1 1 1 1 1

HOSE & PIPE CLAMPS NE Aluminum Clamp with Vinyl Coating

ØH

s Vinyl coating allows a more permanent solution for protecting cables against vibration s Screw mount area is bare to ensure firm tightening s Material: Aluminum Alloy 5052 H-32, TPV Coating s Color: Aluminum with Black Coating

W

Item No.

“D” Holding Ø

Ø“H” Hole

“E” Ref.

“T”

“W”

Pack Qty.

Bulk Pack Qty.

NE3 NE4 NE5 NE6 NE7 NE8 NE9 NE10 NE11 NE12 NE14 NE16 NE18 NE20

3/16 (4.8) 1/4 (6.4) 5/16 (7.9) 3/8 (9.5) 7/16 (11.1) 1/2 (12.7) 9/16 (14.3) 5/8 (15.9) 11/16 (17.5) 3/4 (19.1) 7/8 (22.2) 1 (25.4) 1-1/8 (28.6) 1-1/4 (31.8)

.204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2)

.50 (12.7) .53 (13.5) .56 (14.2) .59 (15) .62 (15.7) .65 (16.5) .75 (19.1) .78 (19.8) .81 (20.6) .84 (21.3) .90 (22.9) .96 (24.4) 1.05 (26.7) 1.11 (28.2)

1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/16 (1.6) 1/16 (1.6) 1/16 (1.6) 1/16 (1.6) 1/16 (1.6) 1/16 (1.6)

3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7)

1 1 1 1 1 1 1 1 1 1 1 1 1 1

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500

7/32 (5.6)

E

T ØD

AL Aluminum Clamp

s Material: Aluminum Alloy 5052 H-32 s Color: Aluminum Item No.

“D” Holding Ø

Ø“H” Hole

“E” Ref.

“T”

“W”

AL2A AL3A AL4A AL5A AL6A AL7A AL8A AL9A AL10A AL11 AL12 AL14 AL16 AL18 AL20

1/8 (3.2) 3/16 (4.8) 1/4 (6.4) 5/16 (7.9) 3/8 (9.5) 7/16 (11.1) 1/2 (12.7) 9/16 (14.3) 5/8 (15.9) 11/16 (17.5) 3/4 (19.1) 7/8 (22.2) 1 (25.4) 1-1/8 (28.6) 1-1/4 (31.8)

.204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2) .204 (5.2)

.46 (11.7) .50 (12.7) .53 (13.5) .56 (14.2) .59 (15) .62 (15.7) .65 (16.5) .75 (19.1) .78 (19.8) .81 (20.6) .84 (21.3) .90 (22.9) .96 (24.4) 1.05 (26.7) 1.11 (28.2)

1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/32 (0.8) 1/16 (1.6) 1/16 (1.6) 1/16 (1.6) 1/16 (1.6) 1/16 (1.6) 1/16 (1.6)

3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 3/8 (9.5) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 1/2 (12.7)

Pack Bulk Pack Qty. Qty.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500

MHC Series Mini Worm Gear Hose Clamps

Specifications: s Band and Housing: Stainless steel s Screw: 1/4 inch hex-head. Plated carbon steel Features: s To be used on small hose applications s Low profile housing and thin band make them easier to install or remove in confined areas

A

Diameter Range D Item No.

SAE Size

Min (In)

Max (In)

A (In)

Pack Qty.

Bulk Pack Qty.

MHC04A MHC05A MHC06A MHC08A MHC10A MHC12A MHC16A MHC20A

4 5 6 8 10 12 16 20

0.250 0.250 0.312 0.375 0.375 0.500 0.500 0.750

0.625 0.687 0.875 1.000 1.062 1.250 1.500 1.750

0.312 0.312 0.312 0.312 0.312 0.312 0.312 0.312

1 1 1 1 1 1 1 1

100 100 100 100 100 50 50 50

D

Diameter Range D Item No.

SAE Size

Min (In)

Max (In)

A (In)

Pack Qty.

Bulk Pack Qty.

MHC24A MHC28A MHC30A MHC32A MHC36A MHC44A MHC48A

24 28 30 32 36 44 48

1.000 1.250 1.375 1.500 1.750 2.250 2.500

2.000 2.250 2.375 2.500 2.750 3.250 3.500

0.312 0.312 0.312 0.312 0.312 0.312 0.312

1 1 1 1 1 1 1

50 20 25 25 25 20 20

929

HOSE & TUBING CLAMPS Hose Clamps

s All hose clamps have rounded edges to protect the hose s Three piece interlock construction-no spot welds to corrode s Easily installed with screwdriver, nut driver, or socket wrench Partial Stainless All 300 Stainless All 316 Stainless Item No.

Item No.

Item No.

HCL-M4HSP HCL-M6HSP —

HCL-M4HSPX HCL-M6HSPX —

HCL-6HSP HCL-8HSP HCL-10HSP HCL-12HSP HCL-16HSP HCL-20HSP HCL-24HSP HCL-28HSP HCL-32HSP HCL-36HSP HCL-40HSP HCL-44HSP HCL-48HSP HCL-52HSP HCL-56HSP HCL-64HSP HCL-80HSP HCL-96HSP

HCL-6HSPX HCL-8HSPX HCL-10HSPX HCL-12HSPX HCL-16HSPX HCL-20HSPX HCL-24HSPX HCL-28HSPX HCL-32HSPX HCL-36HSPX HCL-40HSPX HCL-44HSPX HCL-48HSPX HCL-52HSPX — HCL-64HSPX HCL-80HSPX HCL-96HSPX

Clamp Clamp Clamp Clamp Diameter Diameter Diameter Diameter Fractional Fractional Metric Metric Min. Max. Min. Max.

SAE #

Pack Qty.

5

Partial Stainless - Stainless steel band and housing with carbon screw. Recommended for most applications.

All 300 Stainless - 300 series stainless steel band, housing and screw. Highly corrosion resistant and low in magnetic permeability.

All 316 Stainless - Marine grade 316 stainless steel band, housing and screw. Recommended in highly corrosive and salt-water environments.

Non-magnetic.

⁄16" Band HCL-M4P HCL-M6P HCL-M8P 1 ⁄2" Band HCL-6H HCL-8H HCL-10H HCL-12H HCL-16H HCL-20H HCL-24H HCL-28H HCL-32H HCL-36H HCL-40H HCL-44H HCL-48H HCL-52H HCL-56H HCL-64H HCL-80H HCL-96H

WDHC Series Worm Drive or Worm Gear Hose Clamps

7

5

5

7

⁄32 ⁄16 ⁄16

7

3

⁄8 ⁄16 ⁄16 9 ⁄16 11⁄16 3 ⁄4 11 ⁄16 15⁄16 19⁄16 113⁄16 21⁄16 25⁄16 29⁄16 213⁄16 31⁄16 39⁄16 45⁄8 41⁄2 7 9

⁄8 ⁄8 1

5.6 7.9 11.1

15.9 22.2 25.4

4 6 8

10 10 10

7 ⁄8 1 11⁄16 11⁄4 11⁄2 13⁄4 2 21⁄4 21⁄2 23⁄4 3 31⁄4 31⁄2 33⁄4 4 41⁄2 51⁄2 61⁄2

9.5 11.1 14.3 14.3 17.5 19.1 27 33.3 39.7 46 52.4 58.7 65.1 71.4 77.8 90.5 117.5 104

22.2 25.4 27 31.7 38.1 44.4 50.8 57.2 63.5 69.9 76.2 82.6 88.9 95.3 101.6 114.3 139.7 152.4

6 8 10 12 16 20 24 28 32 36 40 44 48 52 56 64 80 96

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

TBC Series T-Bolt Hose Clamps

.438 (11.1) D Dia.

Specifications: s Material: Refer to Chart

A

D

Features: s Can be used with the TSL or TQS series sleeves s Band detaches from the housing so you can install or remove them without disconnecting the hose or tube s Screw is same material as band Item No.

Dia Range D

Pack

Carbon Steel

Stainless Steel

SAE #

Min (In)

Max (In)

A (In)

Qty

WDHC04A WDHC06A WDHC08A WDHC10A WDHC12A WDHC16A WDHC20A WDHC24A WDHC28A WDHC32A WDHC36A WDHC44A WDHC48A WDHC52A WDHC56A WDHC60A WDHC64A WDHC72A WDHC80A WDHC88A WDHC96A

WDHC04B WDHC06B WDHC08B WDHC10B WDHC12B WDHC16B WDHC20B WDHC24B WDHC28B WDHC32B WDHC36B WDHC44B WDHC48B WDHC52B WDHC56B WDHC60B WDHC64B WDHC72B WDHC80B WDHC88B WDHC96B

4 6 8 10 12 16 20 24 28 32 36 44 48 52 56 60 64 72 80 88 96

0.250 0.438 0.500 0.500 0.500 1.063 0.750 1.000 1.250 1.500 1.750 2.250 2.500 2.750 3.000 3.250 2.500 3.000 3.500 4.000 4.500

0.625 0.750 0.875 1.063 1.250 1.500 1.750 2.000 2.250 2.500 2.750 3.250 3.500 3.750 4.000 4.250 4.500 5.000 5.500 6.000 6.500

0.320 0.320 0.320 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500 0.500

100 100 100 50 50 50 50 25 25 25 25 25 20 20 20 20 20 10 10 10 10

930

.750 (19.1)

Specifications: s All components 301 stainless steel s Bolt: 1/4 - 28 inch s Nut: 7/16 inch hex, nylon insert Features: s Designed to provide a dependable seal on large diameter applications where high vibration occurs Diameter Range D Item No.

SAE Size

Min (In)

Max (In)

Pack Qty

TBC15A TBC17A TBC28A TBC32A TBC36A TBC40A TBC44A TBC48A TBC52A TBC56A TBC60A TBC64A TBC68A TBC76A TBC84A TBC92A TBC100A TBC108A TBC116A TBC124A TBC132A TBC140A TBC148A TBC156A TBC172A TBC188A TBC204A

--------28 32 36 40 44 48 52 56 60 64 68 76 84 92 100 108 116 124 132 140 148 156 172 188 204

1.375 1.625 1.750 1.875 2.125 2.250 2.375 2.375 2.500 2.625 2.750 2.875 3.000 3.250 3.500 3.750 4.000 4.250 4.500 4.750 5.000 5.250 5.500 5.750 6.250 6.750 7.250

1.562 1.875 1.937 2.187 2.312 2.437 2.562 2.687 2.812 2.937 3.062 3.187 3.312 3.562 3.812 4.062 4.312 4.562 4.812 5.062 5.312 5.562 5.812 6.062 6.562 7.062 7.562

25 25 25 25 25 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 2 2 2

HOSE STRAPS & CLAMPS TCS & THCS Series Standard & Hanging Cinch Straps

Specifications: s Material: – Standard: Nylon 22, Delrin Buckles – Heavy Duty: Woven Nylon Webbing, Nickel-Plated Steel Buckles s Color: Black

THCS Series

TCS Series

TCS Heavy

Features: s Add, remove or adjust hose bundles in minutes. s Cuts normal installation time by 50% s The hook and loop design holds hoses securely while allowing natural hose expansion and contraction movement without damage s The grommet on the THCS strap can be attached to any convenient bulkhead or mounting surface s Excellent UV and weather resistance

THCS Heavy

Hanging Cinch Straps Cinch Straps

Item No.

Item No.

Bundle Diameter

Standard

Heavy

In

mm

Pack Qty.

TCS4A TCS8A TCS12A TCS16A TCS20A

TCS4HA TCS8HA TCS12HA TCS16HA TCS20HA

1.270 2.540 3.820 5.100 6.370

32.25 64.51 97.02 129.54 161.79

1 1 1 1 1

Bulk Pack Qty.

100 100 50 50 50

Bundle Diameter

Standard

Heavy

In

mm

Pack Qty.

Bulk Pack Qty.

THCS1A THCS4A THCS8A THCS12A THCS16A THCS20A

THCS4HA THCS8HA THCS12HA THCS16HA THCS20HA

0.320 1.270 2.540 3.820 5.100 6.370

8.12 32.25 64.51 97.02 129.54 161.79

1 1 1 1 1 1

100 100 100 50 50 50

THC & SHC Series Quick Assemble Hose Clamps

W

Features: s Quick and easy assembly or removal s Adjustable locking range to fit various diameters s Excellent for securing the ends of textile covers to the hose assembly

Specifications: s Material: THC Series - UL94V-2 Nylon 6/6 SHC Series - UL94 HB Nylon 6/6 s Color: THC Series: Black SHC Series: White Bundle Range

W

Bundle Range

W

Item No.

In

mm

In

mm

Pack Qty.

Bulk Pack Qty.

Item No.

In

mm

In

mm

THC1A THC2A SHC-23 THC3A SHC-26 THC4A SHC-30 THC6A SHC-32 THC7A SHC-38 THC8A SHC-44 THC9A SHC-50 THC10A THC11A SHC-56 SHC-62 THC12A

0.260 - 0.315 0.315 - 0.362 0.359 - 0.390 0.362 - 0.413 0.390 - 0.468 0.413 - 0.472 0.468 - 0.531 0.504 - 0.591 0.531 - 0.593 0.591 - 0.677 0.593 - 0.674 0.670 - 0.728 0.687 - 0.812 0.717 - 0.807 0.750 - 0.875 0.807 - 0.906 0.866 - 0.984 0.875 - 1.000 0.953 - 1.093 0.984 - 1.102

6.6 - 8.0 8.0 - 9.2 9.1 - 9.9 9.2 - 10.5 9.9 - 11.9 10.5 - 12.0 11.9 - 13.5 12.8 - 15.0 13.5 - 15.1 15.0 - 17.2 15.1 - 16.7 17.0 - 18.5 17.5 - 20.6 18.2 - 20.5 19.1 - 22.2 20.5 - 23.0 22.0 - 25.0 22.2 - 25.4 24.2 - 27.8 25.0 - 28.0

0.197 0.197 0.220 0.197 0.220 0.236 0.220 0.276 0.220 0.276 0.220 0.276 0.220 0.276 0.220 0.276 0.276 0.220 0.310 0.276

5.0 5.0 5.6 5.0 5.6 6.0 5.6 7.0 5.6 7.0 5.6 7.0 5.6 7.0 5.6 7.0 7.0 5.6 7.9 7.0

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

THC13A SHC-68 THC14A THC15A SHC-80 THC16A SHC-92 THC17A THC18A THC19A THC20A THC21A THC22A SHC-134 THC23A THC24A THC25A THC26A THC27A THC28A

1.063 - 1.181 1.093 - 1.187 1.161 - 1.280 1.280 - 1.398 1.250 - 1.437 1.378 - 1.516 1.406 - 1.625 1.496 - 1.634 1.614 - 1.752 1.732 - 1.870 1.850 - 1.988 1.969 - 2.106 2.087 - 2.244 2.125 - 2.375 2.224 - 2.382 2.362 - 2.559 2.598 - 2.756 2.756 - 2.953 2.992 - 3.150 3.150 - 3.346

27.0 - 30.0 26.2 - 30.2 29.5 - 32.5 32.5 - 35.5 31.8 - 36.5 35.0 - 38.5 35.7 - 41.3 38.0 - 41.5 41.0 - 44.5 44.0 - 47.5 47.0 - 50.5 50.0 - 53.5 53.0 - 57.0 54.0 - 60.3 56.5 - 60.5 60.0 - 65.0 66.0 - 70.0 70.0 - 75.0 76.0 - 80.0 80.0 - 85.0

0.295 0.310 0.295 0.315 0.310 0.315 0.360 0.315 0.315 0.315 0.315 0.315 0.315 0.400 0.315 0.315 0.315 0.315 0.315 0.315

7.5 7.9 7.5 8.00 7.9 8.0 9.1 8.0 8.0 8.0 8.0 8.0 8.0 10.2 8.0 8.0 8.0 8.0 8.0 8.0

Pack Qty.

Bulk Pack Qty.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

100 100 100 100 100 50 100 50 50 50 50 50 50 100 50 50 50 50 50 50

931

CLAMPS Beta clamps are ideal for clamping pipe, tube, hose and electric cables. They are an economical and easy way of securing them in all types of terrestrial, marine, OEM and industrial applications. Beta clamps are used in all areas of industrial, mobile and marine hydraulics, general industrial pipe construction, the field of press technology, instrumentation and control technology and many more. s s s s s s s

Beta clamps offer shock-absorption, vibration dampening and noise reducing properties Beta clamps feature a practical and economical design which make for quick, easy pipe installation and layout Using weldable plates, it's easy to anchor the clamps to machinery and steel work Fast, safe, economic installation and service in piping system Upper and lower clamp half are identical Ribs in clamp bore are designed to absorb shock and vibration in the direction of the tube axis Clamps can be easily cleaned due to their design

Beta Clamps Standard Series Steel or 304 Stainless Components

A2 A1

s Cushions are polypropylene (green color) s Recommended for systems with less than 1500 PSI without dynamic loads

.12" Thick Size

Steel

Stainless

Item No.

Item No.

Group

ZS-200 ZS-202 ZS-204 ZS-206 ZS-208 ZS-210 ZS-212 ZS-214 ZS-216 ZS-218 ZS-220 ZS-222 ZS-224

ZS-226 ZS-228 ZS-230 ZS-232 ZS-234 ZS-236 ZS-238 ZS-240 ZS-242 ZS-244 ZS-246 ZS-248 ZS-250

S2 S2 S2 S3 S3 S3 S3 S4 S5 S5 S5 S5 S6

Tube Size 1

⁄2 — 5 ⁄8 3 ⁄4 — 7 ⁄8 1 — 11⁄4 — 11⁄2 — 2

Pipe Size

A1

A2

A3

H1

H2

— 1 ⁄4 — — 1 ⁄2 — — 3 ⁄4 — 1 — 11⁄4 —

1.02 1.02 1.02 1.29 1.29 1.29 1.29 1.57 2.04 2.04 2.04 2.04 2.59

1.57 1.57 1.57 1.96 1.96 1.96 1.96 2.28 2.75 2.75 2.75 2.75 3.38

1.65 1.65 1.65 2.04 2.04 2.04 2.04 2.36 2.83 2.83 2.83 2.83 3.46

.76 .76 .76 .80 .80 .80 .80 .94 1.25 1.25 1.25 1.25 1.41

1.54 1.54 1.54 1.61 1.61 1.61 1.61 1.88 2.52 2.52 2.52 2.52 2.83

Bolt 1

⁄4-20 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1

x x x x x x x x x x x x x

H2

Pack Qty.

13⁄8 13⁄8 13⁄8 11⁄2 11⁄2 11⁄2 11⁄2 13⁄4 21⁄2 21⁄2 21⁄2 21⁄2 23⁄4

H1

1 1 1 1 1 1 1 1 1 1 1 1 1

.12" Thick 1.2" A3

Beta "Smoothie" Clamps Standard Series Steel and 304 Stainless Components s s s s

A2

Cushions are polypropylene (green color) Chamfered and small core protects hose cover and extends hose life Reduces wear on hose connection caused by vibration and surge Uses standard beta hardware Steel

Stainless

Item No.

Item No.

ZS-252 ZS-254 ZS-256 ZS-258 ZS-260 ZS-262

ZS-264 ZS-266 ZS-268 ZS-270 ZS-272 ZS-274

.12"

A1

Size

H2 Group

S2 S2 S3 S3 S4 S5

SAE 100R1 Hose Size 1

⁄4 3 ⁄8 1 ⁄2 5 ⁄8 3 ⁄4 1

A1

1.02 1.02 1.29 1.29 1.57 2.05

A2

1.57 1.57 1.96 1.96 2.28 2.75

A3

1.65 1.65 2.04 2.04 2.36 2.83

H1

.76 .76 .80 .80 .94 1.25

H2

1.54 1.54 1.61 1.61 1.88 2.52

Pack Qty.

Bolt 1

⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20

x x x x x x

3

1 ⁄8 13⁄8 11⁄2 11⁄2 13⁄4 21⁄2

1 1 1 1 1 1

H1

Plate is 1.2" x “A3” x .12" Thick

Beta Clamps Heavy Series Steel and 304 Stainless Components

s Cushions are polypropylene (green color) s Recommended for systems with greater than 1500 PSI operating pressure, operations with pressure surges and applications with wide temperature fluctuations s Absorbs high levels of shock, noise and vibration Steel Item No.

Item No.

Group

ZS-348 ZS-350 ZS-352 ZS-354 ZS-356 ZS-358 ZS-360 ZS-362 ZS-364 ZS-366 ZS-368 ZS-370 ZS-372 ZS-374

ZS-376 ZS-378 ZS-380 ZS-382 ZS-384 ZS-386 ZS-388 ZS-390 ZS-392 ZS-394 ZS-396 ZS-398 ZS-401 ZS-402

H3 H3 H3 H4 H4 H4 H4 H4 H5 H5 H5 H5 H6 H6

932

A3

T

Stainless Tube Size 1

⁄2 — 5 ⁄8 3 ⁄4 — 7 ⁄8 1 — 11⁄4 — 11⁄2 — — 2

Pipe Size

A1

A2

A3

H2

— 1 ⁄4 — — 1 ⁄2 — — 3 ⁄4 — 1 — 11⁄4 11⁄2 —

1.29 1.29 1.29 1.77 1.77 1.77 1.77 1.77 2.36 2.36 2.36 2.36 3.54 3.54

2.87 2.87 2.87 3.34 3.34 3.34 3.34 3.34 3.93 3.93 3.93 3.93 5.90 5.90

2.16 2.16 2.16 2.75 2.75 2.75 2.75 2.75 3.30 3.30 3.30 3.30 4.52 4.52

1.88 1.88 1.88 2.51 2.51 2.51 2.51 2.51 2.99 2.99 2.99 2.99 4.33 4.33

Pack Qty.

Bolt 3

⁄8-16 3 ⁄8-16 3 ⁄8-16 3 ⁄8-16 3 ⁄8-16 3 ⁄8-16 3 ⁄8-16 3 ⁄8-16 3 ⁄8-16 3 ⁄8-16 3 ⁄8-16 3 ⁄8-16 3 ⁄8-16 3 ⁄8-16

x x x x x x x x x x x x x x

13⁄4 13⁄4 13⁄4 21⁄4 21⁄4 21⁄4 21⁄4 21⁄4 23⁄4 23⁄4 23⁄4 23⁄4 23⁄4 23⁄4

1 1 1 1 1 1 1 1 1 1 1 1 1 1

Size H2 T A1 B1 A2

CLAMPS Beta clamps are ideal for clamping pipe, tube, hose and electric cables. They are an economical and easy way of securing them in all types of terrestrial, marine, OEM and industrial applications. Beta clamps are used in all areas of industrial, mobile and marine hydraulics, general industrial pipe construction, the field of press technology, instrumentation and control technology and many more. s s s s s s s

Beta clamps offer shock-absorption, vibration dampening and noise reducing properties Beta clamps feature a practical and economical design which make for quick, easy pipe installation and layout Using weldable plates, it's easy to anchor the clamps to machinery and steel work Fast, safe, economic installation and service in piping system Upper and lower clamp half are identical Ribs in clamp bore are designed to absorb shock and vibration in the direction of the tube axis Clamps can be easily cleaned due to their design

Beta Clamps Twin Series Steel and 304 Stainless Components

s Cushions are polypropylene (green color) s Ideal for general-duty applications subject to moderate levels of shock and vibration Steel

Size

H3

Size

H2 H1 1.2"

A1 A3 A2

.2"

Stainless

Item No.

Item No.

Group

ZS-276 ZS-278 ZS-280 ZS-282 ZS-284 ZS-286 ZS-288 ZS-290 ZS-292 ZS-294 ZS-296 ZS-298

ZS-300 ZS-302 ZS-304 ZS-306 ZS-308 ZS-310 ZS-312 ZS-314 ZS-316 ZS-318 ZS-320 ZS-322

T2 T2 T2 T3 T3 T3 T3 T4 T5 T5 T5 T5

Tube Size 1

⁄2 — 5 ⁄8 3 ⁄4 — 7 ⁄8 1 — 11⁄4 — 11⁄2 —

Pipe Size

A1

A2

A3

H1

H2

H3

— 1 ⁄4 — — 1 ⁄2 — — 3 ⁄4 — 1 — 11⁄4

1.14 1.14 1.14 1.41 1.41 1.41 1.41 1.77 2.20 2.20 2.20 2.20

2.16 2.16 2.16 2.75 2.75 2.75 2.75 3.34 4.33 4.33 4.33 4.33

2.08 2.08 2.08 2.63 2.63 2.63 2.63 3.22 4.17 4.17 4.17 4.17

.70 .70 .70 .92 .92 .92 .92 1.02 1.25 1.25 1.25 1.25

1.02 1.02 1.02 1.45 1.45 1.45 1.45 1.65 2.12 2.12 2.12 2.12

1.71 1.71 1.71 2.14 2.14 2.14 2.14 2.34 2.81 2.81 2.81 2.81

Bolt

Pack Qty.

⁄16-18 x 13⁄8 5 ⁄16-18 x 13⁄8 5 ⁄16-18 x 13⁄8 5 ⁄16-18 x 13⁄4 5 ⁄16-18 x 13⁄4 5 ⁄16-18 x 13⁄4 5 ⁄16-18 x 13⁄4 5 ⁄16-18 x 2 5 ⁄16-18 x 23⁄8 5 ⁄16-18 x 23⁄8 5 ⁄16-18 x 23⁄8 5 ⁄16-18 x 23⁄8

1 1 1 1 1 1 1 1 1 1 1 1

5

Beta "Smoothie" Clamps Twin Series Steel and 304 Stainless Components

s Cushions are polypropylene (green color) s Chamfered and smooth core protects hose cover and extends the life of the hose s Reduces wear on hose connection caused by vibration s Uses standard beta twin hardware Size

H3

Size

H2 H1

.2"

A1 A3 A2

1.2"

Steel

Stainless

Item No.

Item No.

ZS-324 ZS-326 ZS-328 ZS-330 ZS-332 ZS-334

ZS-336 ZS-338 ZS-340 ZS-342 ZS-344 ZS-346

SAE 100R1 Group Hose Size

T2 T2 T3 T4 T4 T5

1

⁄4 ⁄8 ⁄2 5 ⁄8 3 ⁄4 1 3 1

A1

1.14 1.14 1.41 1.77 1.77 2.20

A2

2.16 2.16 2.75 3.34 3.34 4.33

A3

2.08 2.08 2.63 3.22 3.22 4.17

H1

.70 .70 .92 1.02 1.02 1.25

H2

1.02 1.02 1.45 1.65 1.65 2.12

H3

1.71 1.71 2.14 2.34 2.34 2.81

Pack Qty.

Bolt 5

3

⁄16-18 x 1 ⁄8 ⁄16-18 x 13⁄8 ⁄16-18 x 13⁄4 5 ⁄16-18 x 2 5 ⁄16-18 x 2 5 ⁄16-18 x 23⁄8 5 5

1 1 1 1 1 1

CLAMPS & WORKHOLDING Pages 310 - 379

933

HOSE REELS Spring Retractable Hose Reels

Properly stores hose when not in use to prevent tripping and injury. Saves time over manually coiling hose after use. All steel construction with durable baked on powder coat finish. Multiposition guide arm allows for mounting on either floor, wall, ceiling, bench or pit. Automatically maintains desired working length of hose and adjustable hose bumpers allow any length of hose to be maintained outside the reel. Comes complete with hose. Supplied with standard PVC hose.

Item No.

Reelcraft

RHR-10 RHR-15 RHR-25 RHR-30 RHR-35 RHR-50

Style

4420 4435 4625 5635 5650 7850

Hose I.D. 1

⁄4 ⁄4 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2

A A A A A B

1 3

Lgth.

(Ft.)

20 35 25 35 50 50

Max. Temp. psi Degrees Application

300 300 300 300 300 300

150 150 150 150 150 150

Air/Water Air/Water Air/Water Air/Water Air/Water Air/Water

A 7

12 ⁄8 127⁄8 127⁄8 141⁄2 171⁄2 201⁄4

B 5

12 ⁄8 125⁄8 125⁄8 133⁄4 161⁄2 19

Style B

Style A

C

D

E

8 8 8 93⁄4 93⁄4 77⁄8

1

3

2 ⁄2 21⁄2 21⁄2 21⁄2 21⁄2 37⁄8

Mounting Holes Dia. Weight

5 ⁄8 53⁄8 53⁄8 6 6 7

5

⁄16 ⁄16 ⁄16 5 ⁄16 5 ⁄16 1 ⁄2

Pack Qty.

20 21 22 28 40 57

5 5

1 1 1 1 1 1

A C D

E

B

"Competitor" Large Capacity Hose Reel One piece all welded steel "A" frame construction, low profile outlet and open drum slot riser for smooth even hose wraps and no kinking. Solid steel crank with smooth round handle easily rotates drum riding on permanently lubricated pillow-block bearings.

Durable proprietary CPC® powder coat finish. Brass NPT swivel inlet is machined from solid. Long handled lock pin secures reel and rotation when not in use. Hose not included.

Hose Capacity (Ft.) Item No.

3/8" I.D.

CX-1125-4-100 CX-1125-4-200 CX-1125-4-325

1/2" I.D.

140 300 450

100 200 325

p.s.i.

Max Temp Degrees F

3,000 3,000 3,000

WxHxL 3

1

Weight (Lbs.)

Pack Qty.

36 39 48

1 1 1

1

21 ⁄4 x 18 ⁄8 x 17 ⁄2 273⁄4 x 181⁄8 x 171⁄2 333⁄4 x 181⁄8 x 171⁄2

225 225 225

Self-Retracting Hose Reels For air, water or oil. Lubricated factory-balanced containerized spring motor ensures long lasting reliability. 1⁄4" steel base and post adds rigidity reducing vibration. Larger size and double supported axle on B series models. Triple support points to the center shaft and dual pedestal support arms on C series models.

Solid 1" steel axle with self-lubricated precision bearings. Guide arm adjusts to wall, floor and ceiling mounting positions. Multiposition lock ratchet secures hose at desired length. Includes hose and adjustable hose stop.

Style A

Style B

Lightweight compact design, with high-quality heavy-duty steel construction and Coxreels' proprietary CPC® powder coat finish.

Direct hand crank rewind action, with comfortable round tapered handle. Adjustable hand brake prevents unreeling backlash. Solid brass full-flow NPT swivel inlet, rolled edges on discs provide maximum protection. High pressure 4,000psi. Hose not included.

CX-112-3-100 CX-112-3-150 CX-117-3-250 CX-117-4-225

934

I.D. 3

⁄8 3 ⁄8 3 ⁄8 1 ⁄2

Style

CX-P-LP-325 CX-SH-N-350

A B

I.D. 3

⁄8 3 ⁄8

Length (Ft.)

25 50

p.s.i.

Max Temp Degrees F

WxHxL

Weight (Lbs.)

Pack Qty.

300 300

150 150

61⁄4 x 141⁄2 x 133⁄4 83⁄4 x 21 x 195⁄8

28 50

1 1

EZ-Coil™ Controlled Retraction Hose Reels

"Challenger" Hand Crank Hose Reel

Item No.

Item No.

Length (Ft.)

p.s.i.

Max Temp Degrees F

WxHxL x x

Weight (Lbs.)

Pack Qty.

100 150 250 225

4,000 4,000 4,000 4,000

225 225 225 225

151⁄4 x 13 x 12 193⁄4 x 13 x 12 151⁄4 x 18 x 17 20 x 18 x 17

19 21 30 31

1 1 1 1

Equipped with all the highquality features and components found Coxreels' standard reels with the extra added safety of EZ-Coil™. Controlled retraction reduces workplace accidents and injuries caused by careless hose reel operation. Guide arm adjusts for various mounting positions. Locking ratchet secures desired hose length. For air, water or oil. Includes hose and adjustable rubber hose stop.

Item No.

CX-EZ-P-LP-325 CX-EZ-P-LP-350

I.D. 3

⁄8 3 ⁄8

Max Temp Length Degrees (Ft.) p.s.i.

F

25 50

300 300

150 150

WxHxL

Weight (Lbs.)

Pack Qty.

61⁄4 x 141⁄2 x 133⁄4 61⁄8 x 181⁄4 x 171⁄4

35 51

1 1

TUBING & CHANNELS Nylon Tubing

Tubing & Accessories Plastic Tubing Cutter

Tubing Cutter

Replacement Blades

High quality nylon tubing for applications requiring lightweight, toughness, flexibility and chemical resistance. It is dimensionally stable.

Tubing is compatible with SMC fittings. See page 944.

Black

Natural

Item No.

Item No.

TUB-10 TUB-15 TUB-20 — TUB-25

TUB-13 TUB-18 — TUB-23 TUB-28

Tubing Cutter with Leash OD 1

⁄8 ⁄4 ⁄8 3 ⁄8 1 ⁄2 1 3

ID

Wall Thickness

Working Pressure

Roll Length Feet

.093 .170 .275 .275 .375

.016 .040 .050 .050 .062

225 265 220 220 200

500 500 500 100 500

Note: The working pressure PSI @75 degrees Fahrenheit.

Provides a square cut without deforming the tubing. Allows for a secure connection into a fitting. Ideal for plastic tubing 1⁄8" to 3⁄4" OD. The leash allows you to affix to clothing or cutting location.

Polyurethane Tubing

Item No.

Description

Pack Qty.

TUB-100 TUB-105 TUB-110

Plastic Tube Cutter Plastic Tube Cutter w/Leash Tube Cutter Blades

1 1 1

Tubing & Accessories Plastic Tube Channels

Made from ether based compound, it will not hydrolyze or degrade when exposed to water. Extremely flexible and resistant to kinking. Stands up well to fuels and oils.

Tubing is compatible with SMC fittings. See page 944.

Black

Natural

Item No.

Item No.

TUB-70 TUB-75 TUB-80 TUB-85 —

TUB-73 TUB-78 TUB-83 — TUB-88

OD 1

⁄8 ⁄4 ⁄8 1 ⁄2 1 ⁄2 1 3

ID 1

⁄16 .160 1 ⁄4 .320 .320

Wall Thickness

Working Pressure

Roll Length Feet

.031 .045 .062 .090 .090

233 148 147 140 140

500 500 100 250 100

s s s s

Keeps tubing neat and organized Makes runs easy to follow Ten channels for tubing with 1⁄4" outside diameter Adhesive back for mounting Item No.

Description

Pack Qty.

TUB-130

Plastic Tube Channels

1

Note: The working pressure PSI @75 degrees Fahrenheit.

Polyethylene Tubing

Black

Natural

Item No.

Item No.

TUB-50 TUB-53 TUB-55 TUB-58 TUB-60 TUB-63 TUB-65 —

OD 1

⁄8 1 ⁄4 3 ⁄8 1 ⁄2

ID

Wall Thickness

Working Pressure

Roll Length Feet

.062 .170 .250 .375

.031 .040 .062 .062

120 173 192 123

100 100 100 100

A low pressure tubing that is widely used due to its resistance to most chemicals and solvents, good flexibility and economical cost.

Tubing is compatible with SMC fittings. See page 944.

Note: The working pressure PSI @75 degrees Fahrenheit.

935

TUBING & CHANNELS Cush-A-Clamp® channel mounted clamping systems are ideal for multiple line runs, while absorbing shock and vibration, reducing unwanted noise and preventing galvanic corrosion. The clamp includes a unique shoulder stud which is securely fastened to one clamp half. This design eliminates overtightening and rotation while a nylon insert nut assures a positive lock. Clamps are steel with electrodichromate finish. Fits any standard 15⁄8” wide channel (available below). The cushion is manufactured from a thermoplastic elastomer which withstands the effects of most oils, chemicals, and industrial cleaning compounds, in temperatures from -50 degrees Fahrenheit to 270 degrees Fahrenheit. A patented “living hinge” allows the cushion to be spread apart for quick, easy installation. Interlock edges and channel locator legs insure that the cushion remains in place. Retrofits can be added without disassembling your present system.

Tube Clamps

D A C Item No.

Copper & Copper Steel Water Pipe Tubing OD Nom. OD

ZS-12 ZS-14

B

5

3

⁄4 7 ⁄8

⁄8 3 ⁄4

A

B

C

D

Pack Qty.

.75 .87

1.20 1.31

.52 .58

1.68 1.82

1 1

Pipe Clamps

D A C Item No.

Nominal Pipe Size

A

B

C

D

Pack Qty.

ZS-21 ZS-27 ZS-30

1 11⁄4 11⁄2

1.31 1.66 1.90

1.76 2.17 2.35

.81 .99 1.09

2.34 2.73 2.86

1 1 1

B

U-Strap Clamps

B

The Omega Series® clamp assembly retains, guides, protects, and uniformly spaces line runs. Attached with two standard fasteners (not included) to any flat surface, the Omega Series eliminates the use of special channels, providing a savings in both space and cost. Clamp is steel with electrodichromate finish. The cushion is manufactured from a thermoplastic elastomer which withstands the effects of most oils, chemicals, and industrial cleaning compounds, in temperatures from -50 to 275 degree Fahrenheit. Interlock edges insure that the cushion remains in place. Fasteners not included.

Item No.

ZS-108 ZS-110 ZS-114

Copper & Steel Tubing OD

Copper Water Pipe Nom. OD

Nominal Pipe Size

1

3

1

5

1

3

7

3

1

⁄2 ⁄8 ⁄8

⁄8 ⁄2 ⁄4

⁄4 ⁄8 ⁄2

A

J

F

C

D

J G H

E

A

B

C

D

E

F

G

H

J

Pack Qty.

.50 .62 .87

.82 .94 1.18

.75 .87 1.03

.80 .86 .98

2.20 2.32 2.56

.06 .06 .06

.75 .75 .75

.98 .98 .98

.26 .26 .26

1 1 1

Cush-A-Clamp® Channel

15/8" 7/8"

15/8"

Made of low gauge carbon steel painted green. Channel comes in 5' lengths.

936

Item No.

Max. Load

Pack Qty.

ZS-1000

190

1

AIR GUNS Air Guns Safety Tamperproof

Air Guns Safety Tip - Bottom Hook

s s s s

Chrome plated casting Maximum safety and efficiency Non-corrosive Bottom hook Item No.

COL-600S COL-700S

Inlet

Pack Qty.

⁄4 FPT ⁄4 FPT

1 1

Description

Thumb Lever Control Pistol Grip

1 1

s Safety tip permanently attached to body s Internal valve to keep pressure below 30 psi @ 150 psi s Chrome plated castings Item No.

COL-600ST

Air Guns Extension Safety Tip

Inlet

Pack Qty.

⁄4 FPT

1

1

Air Guns Safety Booster Tip

s s s s s

s Chrome plated casting s 5⁄16" OD tip facilitates use in tight places s Bottom hook s Thumb lever control Item No.

Description

COL-603-S COL-606-S COL-608-S COL-610-S COL-612-S

3" Safety Extension 6" Safety Extension 8" Safety Extension 10" Safety Extension 12" Safety Extension

1

⁄4 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1

Item No.

Pack Qty.

Inlet

FPT FPT FPT FPT FPT

Venturi holes maximize air volume Chrome plated casting Non-corrosive and leak proof Thumb lever control Lightweight

1 1 1 1 1

Inlet

Pack Qty.

⁄4 FPT

1

1

COL-600-SB

Air Guns Safety Flex Tip

Air Guns High Volume Air Flow Safety Tip

s Chrome plated casting s Flexible neoprene tip allows easy access into brake and transmission fluid lines and passages s Bottom hook s Thumb lever control

High Volume Tip

Item No.

COL-600-FF06 COL-600-FF12

Premium

Standard

Inlet

Pack Qty.

⁄4 FPT ⁄4 FPT

1 1

Description 1

6" Safety Flex Tip 12" Safety Flex Tip

1

Rubber Tip

Designed to increase flow while reducing air consumption.

Provides more efficient blow off operation and savings in compressed air costs. Conforms to OSHA standards for outlet pressure requirements (1910.2424B) and occupational noise level exposure (1910.95). Tips are nickel plated brass with 1⁄8" MPT. Available in either standard or premium models.

Thumb Lever

s High pressure output s Chrome plated casting Item No.

COL-600PV-S COL-600V-S COL-SVT10

Inlet

Pack Qty.

⁄4 FPT ⁄4 FPT —

1 1 1

Description

Premium High Volume Blow Standard High Volume Blow High Volume Blow Gun Tip

1 1

Item No.

Description

COL-601 COL-701

Thumb Lever Pistol Grip

Inlet

Pack Qty.

⁄4 FPT 1 ⁄4 FPT

1 1

1

Pistol Grip

Air Guns Premium Safety Tip and Extension

Standard

Standard Replacement Nozzle

3" Standard

Tough zinc die cast body with flat black powder coat finish and nickel plated tips combined for superior corrosion resistance. Ergonomic design and large operating lever reduce user fatigue and discomfort even during long term use. All come with safety tips.

Replacement Nozzle Item No.

Description

COL-600P-S COL-603P-S

Standard 3" Standard

Inlet

Pack Qty.

Item No.

⁄4 FPT 1 ⁄4 FPT

1 1

COL-ST10 COL-ST203

1

937

AIR GUNS Air Guns Long John Safety

Air Guns Brass Tip - Non-Venting

s Ideal for reaching inaccessible or difficult to reach locations s Venturi tip increases thrust and limits static pressure to less than 30 psi when tip is blocked s 1⁄4" NPT inlet s Maximum operating pressure 150 psi s Lightweight pistol style grip and standard aluminum extension s Available in four lengths s Meets OSHA standards

s Won't scratch or nick delicate surfaces s Great for blowing out molds s Chrome plated casting Item No.

Size

Pack Qty.

⁄4 FPT

1

Description

COL-605

Thumb Lever Control

1

Air Guns Safety Blow Brush

Item No.

Length (ft.)

Pack Qty.

Item No.

Length (ft.)

Pack Qty.

OG-1 OG-2

1 2

1 1

OG-3 OG-4

3 4

1 1

Air Guns Jet Guard Safety

s s s s

s Delivers high thrust with pinpoint accuracy s Safety air shield protects workers from chip fly-back s Limits static pressure to 30 psi when tip is blocked s Knurled adjusting nut to control air volume s 1⁄4" NPT inlet s Maximum operating pressure 120 psi s Cast aluminum pistol grip with hanging hook s Meets OSHA standards

Combines cleaning capabilities of a brush and a blow gun Steel brush permanently attached Thumb lever control Chrome plated casting Item No.

COL-801

Inlet

Pack Qty.

⁄4 FPT

1

1

Air Guns High Volume

12" Extension

Item No.

Description

Pack Qty.

OG-5

Jet Guard Safety Air Gun

1

Air Guns Whisper Jet Safety

High Flow

s s s s s s

s Unique nozzle design reduces noise levels 6-20 dB less than conventional air guns s Solid conical tip design prevents blockage of nozzle s 1⁄4" NPT inlet s Maximum operating pressure 150 psi s Cast aluminum pistol grip with hanging hook s Meets OSHA standards Item No.

Description

Pack Qty.

OG-6

Whisper Jet Safety Air Gun

1

Multi-Jet High Flow

Ideal for heavy-duty clean-up and blow-off Light weight, sleek design Meets or exceeds OSHA regulations Has a variable flow trigger for controlled blow-off COL-TYP2500 = 2.1 lbs. thrust, 34 cfm @ 125 psi COL-TYP3800 = 3.1 lbs. thrust, 51 cfm @ 125 psi Item No.

Description

COL-TYP2500CS COL-TYP2512 COL-TYP2524 COL-TYP2536 COL-TYP2548 COL-TYP3800CS

High Flow Tip 12" Extension 24" Extension 36" Extension 48" Extension Multi-Jet with High Flow Tips

Inlet 1

⁄4 ⁄4 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 1 1

Air Gun Kit Patented Quick Coupler System s Patented quick change adapter to switch nozzles quickly s High quality lever-operated heavy-duty air gun s Includes five nozzles: High flow safety nozzle Six inch extension safety nozzle Rubber tip nozzle Needle tip nozzle Air-screen safety nozzle s Clear vinyl compartmented snap pouch included

938

Item No.

Description

Pack Qty.

ZS-400

Air Gun Kit

1

Pack Qty.

1 1 1 1 1 1

AIR GUNS Air Guns Extended Nozzle Pistol Grip s s s s s

Plastic body for light weight Pistol grip for comfortable use Variable output trigger Four inch extended nozzle OSHA compliant Item No.

COL-750-S

Inlet

Pack Qty.

⁄4 FPT

1

1

Air Guns Siphon Spray

s Sprays solvents, mold release, cleaning, etc. s Eight foot clear plastic suction tubing included s Thumb lever control Item No.

Inlet

Pack Qty.

⁄4 FPT

1

1

COL-602

Air Guns Button

Economical alternative to the lever operated and pistol grip styles.

Black polyurethane epoxy finish assures long term protection against corrosion.

Safety Non-Safety

Item No.

Description

COL-660-S COL-665

Safety Tip Non-Safety Tip

Inlet

Pack Qty.

⁄4 FPT 1 ⁄4 FPT

1 1

1

Air Gun Accessories High Volume Air Gun Tips

Male

Female Item No.

Pack Qty.

Description

COL-HFN00MDL High Flow Tip with Male Pipe Thread COL-HFN00FDL High Flow Tip with Female Pipe Thread COL-MJN0DL Multi-Jet Tip (Female)

1 1 1

Female Multi-Jet

Air Guns Syphon Spray s s s s s s s s

Air Guns Blind Hole

Item No.

Description

Pack Qty.

OG-8

Blind Hole Air Gun

1

Pistol grip spray gun for heavy duty use High vacuum syphon delivers up to 16 gallons per hour 12" extension for reaching difficult, hard to reach locations Adjustable trigger and nozzle tip control volume and spray pattern Comes with six foot syphon hose and sinker 1 ⁄4" NPT inlet Maximum operating pressure 150 psi Meets OSHA standards

Item No.

Description

Pack Qty.

OG-7

Syphon Spray

1

s Delivers a high velocity jet of air into deep crevices and blind holes to flush out chips and dirt s Six inch long, 3⁄16" OD brass extension with 1⁄8" diameter plastic stylus for access into narrow holes s Safety air cone protects workers from chip fly-back s 1⁄4" NPT inlet s Maximum operating pressure 120 psi s Meets OSHA standards

939

AIR GUNS & ACCESSORIES Air Gun Accessories Needle Blow Gun Tips

Air Gun Accessories Hose and Gun Sets

Needle tips allow user to get into and blow out tight cavities, crevices and dies too narrow for other tips to reach.

Stainless steel needles with nickel plated brass base. 1⁄8" MPT will fit most blow guns. Available individually or in an assortment of all five. Not vented.

Item No.

Dia. of Needle

Length

15 ⁄16 .042 .050 13⁄16 .072 13⁄4 .095 215⁄32 .134 23⁄4 Kit of All Five

COL-SNT-1 COL-SNT-2 COL-SNT-3 COL-SNT-4 COL-SNT-5 COL-KIT-DPB

Pack Qty.

1 1 1 1 1 1

Item No.

Hose Length (ft.)

Pack Qty.

COL-K1 COL-K2

12 25

1 1

Includes safety air gun (COL-600S) and 1⁄4" ID coiled nylon hose with 1⁄4" rigid male fittings.

Self-Storing Air Hoses Nylon and Polyurethane

Blow Gun Tips

Standard Replacement Nozzle

Lightweight and permanently coiled.

Made from either nylon or polyurethane. Polyurethane offers better kinking, abrasion resistance and coil memory. Hoses come with swivel fittings on both ends to avoid tangling and twisting.

Safety Air Booster Tip

Safety Shield Tip

Rubber Tip

Fits all Coilhose Pneumatic air guns in this catalog, as well as any air gun that will take 1⁄8" MPT tip.

Item No.

Description

Pack Qty.

COL-ST10 COL-ST11 COL-ST12 COL-SAT13

Standard Replacement Nozzle Safety Air Booster Tip Safety Shield Tip Rubber Tip

1 1 1 1

Item No.

Material

COL-N14-12B COL-N14-25B COL-PU14-5B COL-PU14-10B COL-PU14-15B COL-PU14-20B COL-PU14-25B COL-N38-12B COL-N38-25B

Nylon Nylon Poly Poly Poly Poly Poly Nylon Nylon

Connection

Hose ID

1

⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8

1

⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8

Length (ft.)

Pack Qty.

12 25 5 10 15 20 25 12 25

1 1 1 1 1 1 1 1 1

Note: All connections are male pipe threads.

Air Gun Accessories Neoprene Hose

Air Gun Accessories Blow-Off Nozzles

s s s s

Blue neoprene cover with black nitrile tube Flexible, bendable coolant and air hose Adjust to any position and won't shift Allows air or coolant to be precisely directed to the work area s RMA Class A-high oil resistance s Leakproof and engineered with brass nozzles

High thrust air nozzle saves compressed air by flow amplification of 25 times and delivers precise airflow. Adjustable setting allows flow adjustment independent of regulator to minimize air consumption required for blow off, part ejection, cooling or drying. OSHA approved. 1⁄8" NPT connection. 1.88" length.

Item No.

Description

Pack Qty.

VOR-900 VOR-900SS

Aluminum Blow-Off Nozzle Stainless Blow-Off Nozzle

1 1

Item No.

Description

Pack Qty.

COL-90406 COL-90409 COL-90412 COL-90415

1/4 MPT x 6" Nitrile Hose 1/4 MPT x 9" Nitrile Hose 1/4 MPT x 12" Nitrile Hose 1/4 MPT x 15" Nitrile Hose

1 1 1 1

Blow/Vacuum Gun

VACUUM

BLOW

COMPRESSED AIR INLET

Gun

Gun with Dust Bag Kit

940

s s s s

Two cleaning tools in one Made of tough nylon material Resists most chemicals Venturi design increases air volume

8' Suction Hose

Two-in-one cleaning tool operates off shop air to create a powerful vortex for either blowing or vacuuming. Blows clean lathes, saws, etc. Can also be used to provide cooling in manufacturing.

Vacuums metal filing, dust, trimmings, etc., as well as liquid and granulated materials. Hose not included and may be purchased separately.

Item No.

Description

Pack Qty.

JMC-1 JMC-2 JMC-4

Gun Gun w/Dust Bag Kit 8' Suction Hose (11⁄4)

1 1 1

AIR HOSE & QUICK DISCONNECTS Coiled Hose Polyurethane Air Hose Assemblies

Ball lock mechanism provides positive connection on all general purpose and push-to-connect couplings. Hardened stainless steel balls along with a radiused and induction hardened steel ball race gives extended life to the couplings. All are female NPT end fittings.

Polyurethane air hose assemblies are lightweight and highly kink and abrasion resistant. They will withstand the rigors of tough industrial environments while maintaining their resiliency over a long period of time. Resistant to most oils and fuels. Features include straight tails that provide built-in whip hose and reusable fittings.

1

⁄4" working pressure rated at 145 psi @ 75 degrees Fahrenheit ⁄8" working pressure rated at 135 psi @ 75 degrees Fahrenheit

3

Item No.

COL-PR145AB COL-PR1410AB COL-PR1415AB COL-PR1420AB COL-PR1425AB COL-PR1430AB COL-PR1450AB COL-PR3810AB COL-PR3815AB COL-PR3820AB COL-PR3825AB COL-PR3830AB

ID x OD 1

⁄4 x 3⁄8 ⁄4 x 3⁄8 1 ⁄4 x 3⁄8 1 ⁄4 x 3⁄8 1 ⁄4 x 3⁄8 1 ⁄4 x 3⁄8 1 ⁄4 x 3⁄8 3 ⁄8 x 9⁄16 3 ⁄8 x 9⁄16 3 ⁄8 x 9⁄16 3 ⁄8 x 9⁄16 3 ⁄8 x 9⁄16 1

Lgth. (ft.)

MPT Fitting 1

5 10 15 20 25 30 50 10 15 20 25 30

⁄4 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 1

Rigid Rigid Rigid Rigid Rigid Rigid Rigid Rigid Rigid Rigid Rigid Rigid

/ / / / / / / / / / / /

1

⁄4 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 1

Coil OD

Retracted Length

Pack Qty.

21⁄2 21⁄2 21⁄2 21⁄2 21⁄2 21⁄2 21⁄2 41⁄8 41⁄8 41⁄8 41⁄8 41⁄8

21⁄2 6 91⁄2 13 16 19 321⁄2 51⁄2 81⁄2 11 14 17

1 1 1 1 1 1 1 1 1 1 1 1

Swivel Swivel Swivel Swivel Swivel Swivel Swivel Swivel Swivel Swivel Swivel Swivel

Straight Hose General Purpose

General purpose hose features a black EPDM tube; red EPDM cover with a reinforcement of multiple textile spirals.

Designed for air and water applications where contact with petroleum products is minimal. It adheres to a 4:1 safety factor and RMA Class C - medium oil resistance. Temperature range -40 to +212 degree Fahrenheit; working pressures at 70 degree Fahrenheit 200 psi.

Item No.

COL-H14012N COL-H14025N COL-H14050N COL-H38012N COL-H38025N COL-H38050N

ID

OD

1

17

⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8

⁄32 17 ⁄32 17 ⁄32 21 ⁄32 21 ⁄32 21 ⁄32

Lgth. (ft.)

12 25 50 12 25 50

Fitting MPT 1

⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8

MPT MPT MPT MPT MPT MPT

Pack Qty.

1 1 1 1 1 1

Air Hose Thermoplastic

Thermoplastic combines prime PVC with special additives allowing this hose to resist long term deterioration caused by exposure to air line lubricating oils. A tough cover protects against scuffs, cuts and abrasions while rayon spiral synthetic cord assures added strength, making this a product a popular choice for industrial environments.

Temperature range -20 to +150 degree Fahrenheit; working pressure at 70 degree Fahrenheit 300 psi.

Item No.

COL-TP4025 COL-TP4050 COL-TP6025 COL-TP6050

ID

OD

1

17

1

17

⁄4 ⁄4 3 ⁄8 3 ⁄8

⁄32 ⁄32 57 ⁄64 57 ⁄64

Lgth. (ft.)

25 50 25 50

Fitting MPT 1

⁄4 ⁄4 3 ⁄8 3 ⁄8 1

MPT MPT MPT MPT

Pack Qty.

1 1 1 1

Quick Disconnects Push To Connect - Dry Break Couplings For hydraulic service, chemical service, test stands, and other applications where endurance and cleanliness is required (dry break). Flush valve minimizes fluid loss and air inclusion.

Dirt tolerant, low pressure drop permits easy tool changeover. Det Norske Veritas approved. High strength steel with zinc yellow dichromate plating. Working pressure to 10,000 psi.

Coupler

Nipple

Item No.

Item No.

Coupling Size

QD-606 QD-616 QD-608 QD-618

End Fitting Size NPTF

3

3

1

1

⁄8 ⁄2

⁄8 ⁄2

Pack Qty.

1 1

Quick Disconnects Industrial Interchange Meets or exceeds ISO 7241-1 series B interchange for applications in plant, plastic molding, machine tool, test equipment, department of transportation, and mobile hydraulic.

Interchangeable with other ISO-7241-1 series B couplings.

Proven ball lock mechanism provides positive connection. Poppet style double shut off. High strength steel with zinc clear dichromate plating. Working pressure to 7,500 psi.

Coupler

Nipple

Item No.

Item No.

Coupling Size 1

QD-204 QD-214 QD-206 QD-216 QD-208 QD-218

⁄4 3 ⁄8 1 ⁄2

End Fitting Size NPTF 1

⁄4 3 ⁄8 1 ⁄2

Pack Qty.

1 1 1

Quick Disconnects General Purpose

For hydraulic and pneumatic general purpose applications. Meets or exceeds MIL-C-51234. High strength steel with zinc yellow dichromate plating. Valves automatically open in both coupler and nipple halves when connected and automatically close when unit is disconnected. For a double shut off coupling, order a valve coupler and a valve nipple. For a single shut off coupling, order valve coupler and without valve nipple. For no shut off or straight through, order plain coupling and nipple. The two-piece body construction permits larger flow passages than the designated size of the coupling, permitting greater flow, while maintaining low pressure drop. Couplers connect and disconnect in seconds. To connect, pull back the sleeve, insert the nipple into the coupler and release the sleeve. To disconnect, pull back the sleeve, remove the nipple and the halves are disconnected. Standard Buna-N Packer seal is standard on all couplings. Seal provides contact over several times the normal O-ring sealing area. Permits a positive seal at all pressures and enables the coupling to seal under adverse conditions such as side load, scratches and dirt on the nipple.

Temperature range 40 to 200 degree Fahrenheit. Working pressure to 11,000 psi on straight through units. 4,000 psi on valved units.

Coupler

Nipple

Item No.

Item No.

With Valve QD-104 QD-114 QD-106 QD-116 Without Valve QD-124 QD-134

Coupling Size

End Fitting Size NPTF

Pack Qty.

1

1

3

3

1 1

1

1

1

⁄4 ⁄8 ⁄4

⁄4 ⁄8 ⁄4

941

FITTINGS, COUPLERS & CONNECTORS Air Gun Accessories Ball Swivel Fittings

Industrial Interchange Type "15"

Coupler

Fitting

Conversion Fitting

Connector

"RASS BALL SWIVEL FITTINGS ARE USED BETWEEN THE TOOL AND AIR SUPPLY HOSE TO ELIMINATE KINKING AND TWISTING TO DEGREE BEND 'REATER FLOW CAPACITY THAN OTHER BALL SWIVELS 3WIVEL FITTINGS OFFER A 1 ⁄4 BODY SIZE AND INDUSTRIAL OR !2/ INTERCHANGE CONNECTOR !

CONVERSION FITTING TO CONVERT FROM RIGID TO BALL SWIVEL FITTING IS ALSO AVAILABLE "ALL SWIVELS HAVE NICKEL PLATED BARBS #ONNECTORS ARE ZINC PLATED STEEL WITH YELLOW CHROMATE FINISH Item No.

Size

Pack Qty.

⁄4 "ARB X 1⁄4 -04 ⁄8 "ARB X 1⁄4 -04 ⁄4 &04 X 1⁄4 -04 1 ⁄4 "ODY X 1⁄4 -04 1 ⁄4 "ODY X 1⁄4 -04

1 1 1 1 1

Description 1

COL-B0404BS "ALL 3WIVEL &ITTING COL-B0604BS "ALL 3WIVEL &ITTING COL-CFO404BS #ONVERSION &ITTING COL-15-04BS* "ALL 3WIVEL #ONNECTOR COL-14-04BS** "ALL 3WIVEL #ONNECTOR

3

1

)NDUSTRIAL CONNECTOR COMPATIBLE WITH #/, SERIES COUPLERS

!2/ CONNECTOR COMPATIBLE WITH #/, SERIES COUPLERS

Air Gun Accessories Adapter Swivel

Connector

$OES NOT INTERCHANGE WITH AUTOMOTIVE OR !2/ CONNECTORS Item No.

Type

COL-150 COL-152 COL-156 COL-580 COL-581 COL-586 COL-120 COL-1501 COL-1502 COL-1506 COL-1508 COL-5801 COL-5802 COL-5806 COL-1201

#OUPLER #OUPLER #OUPLER #OUPLER #OUPLER #OUPLER #OUPLER #ONNECTOR #ONNECTOR #ONNECTOR #ONNECTOR #ONNECTOR #ONNECTOR #ONNECTOR #ONNECTOR

Thread Size

Pack Qty.

⁄4 &04 1 ⁄4 -04 ⁄8 (OSE "ARB 3 ⁄8 &04 3 ⁄8 -04 3 ⁄8 (OSE "ARB 1 ⁄ &04 1 ⁄4 -04 1 ⁄4 &04 1 ⁄4 (OSE "ARB 3 ⁄8 (OSE "ARB 3 ⁄8 -04 3 ⁄8 &04 3 ⁄8 (OSE "ARB 1 ⁄ -04

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Body Size 1

⁄4 ⁄4 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄ 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄ 1 1

1

3

Couplers & Connectors Plated Steel Couplers, Hardened Steel Connectors. Max. 300 psi Universal Interchange Couplers

s !TTACHES TO TOOLS AND GUNS TO PREVENT AIR LINE TWISTING AND TANGLING s 1⁄4 -04 X 1⁄4 &04 Item No.

Description

Pack Qty.

COL-CFO-404S

!DAPTER 3WIVEL

1

0LATED STEEL COUPLERS HARDENED STEEL CONNECTORS -AX PSI !VAILABLE IN AUTOMOTIVE 4RU &LATE TYPE INDUSTRIAL TYPE AND !2/ TYPE Automotive (Tru-Flate) Interchange Type "16"

)NTERCHANGES WITH THE THREE MOST POPULAR 1⁄4 CONNECTORS INDUSTRIAL -), # TYPE AUTOMOTIVE 425 &,!4% TYPE AND !2/ TYPE 0USH TO CONNECT FOR ONE HAND USE "RASS Item No.

Type

COL-150U COL-152U

Coupler

#OUPLER #OUPLER

Body Size

Thread Size

Pack Qty.

⁄4 &04 ⁄4 -04

1 1

1

1

1

1

⁄4 ⁄4

ARO Interchange Type "14"

Connector

$OES NOT INTERCHANGE WITH INDUSTRIAL OR !2/ CONNECTORS Item No.

COL-160 COL-162 COL-1602 COL-1601

Type

Body Size

#OUPLER #OUPLER #ONNECTOR #ONNECTOR

Thread Size

Pack Qty.

⁄4 &04 ⁄4 -04 ⁄4 &04 ⁄4 -04

1 1 1 1

1

1

1

1

⁄4 ⁄4 ⁄4 ⁄4

1

1

1

1

Couplers & Connectors Rigid Hose Barbs

Female Coupler

Connector Item No.

COL-B0404 COL-FR0404 COL-B0604 COL-FR0604 COL-B0606 COL-B0808

942

Size

Pack Qty.

⁄4 -04 1 ⁄4 &04 1 ⁄4 -04 1 ⁄4 &04 3 ⁄8 -04 1 ⁄ -04

1 1 1 1 1 1

Hose ID 1

⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄

1

$OES NOT INTERCHANGE WITH AUTOMOTIVE OR INDUSTRIAL CONNECTORS Item No.

Coupler

COL-140 COL-142 COL-1401 COL-1402

#OUPLER #OUPLER #ONNECTOR #ONNECTOR

Body Size 1

⁄4 1 ⁄4 1 ⁄4 1 ⁄4

Thread Size

Pack Qty.

⁄4 &04 1 ⁄4 -04 1 ⁄4 -04 1 ⁄4 &04

1 1 1 1

1

COMPRESSION TUBE FITTINGS Compression fittings require no flaring, soldering, or other tube preparation for assembly and are approved for use with annealed copper, aluminum, and thermoplastic tubing.

Compression Tube Fittings Brass Female Elbow

Compression Tube Fittings Brass Union Tee

Item No.

Thread Size

Tube Size

MFP-600 MFP-601 MFP-602 MFP-603 MFP-604 MFP-605 MFP-606

Pack Qty.

Replacement Ferrule

1 1 1 1 1 1 1

MFP-902 MFP-904 MFP-905 MFP-906 MFP-908 MFP-910 MFP-912

5

1

⁄8 1 ⁄4 5 ⁄16 3 ⁄8 1 ⁄2 5 ⁄8 3 ⁄4

⁄16-24 7 ⁄16-24 1 ⁄2-24 9 ⁄16-24 11 ⁄16-20 13 ⁄16-18 1-18

Item No.

MFP-624 MFP-625 MFP-626 MFP-627 MFP-628

MFP-607

Tube Size

Pack Qty.

Replacement Ferrule

⁄8 x 1⁄4 x 1⁄4

1

MFP-906

3

Item No.

MFP-629 MFP-630 MFP-631 MFP-632 MFP-633

Compression Tube Fittings Brass Union Elbow

Item No.

Tube Size

5

⁄8 ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄

⁄ -24 ⁄ -24 ⁄16-24 1 ⁄2-24 9 ⁄16-24 5 ⁄8-24 11 ⁄16-20 13 ⁄16-18 1-18 16 3 8

3

16 1 4 5 16 3 8 7 16 1 2 5 8 3 4

7

Pack Qty.

Replacement Ferrule

1 1 1 1 1 1 1 1 1

MFP-902 MFP-903 MFP-904 MFP-905 MFP-906 MFP-907 MFP-908 MFP-910 MFP-912

Compression Tube Fittings Brass Straight Union

Item No.

Tube Size

5

⁄8 3 ⁄16 1 ⁄4 5 ⁄16 3 ⁄8 1 ⁄2 5 ⁄8 3 ⁄4 7 ⁄8

⁄16-24 3 ⁄8-24 7 ⁄16-24 1 ⁄2-24 9 ⁄16-24 11 ⁄16-20 13 ⁄16-18 1-18 11⁄8-18

Pack Qty.

Replacement Ferrule

1 1 1 1 1 1 1 1 1

MFP-902 MFP-903 MFP-904 MFP-905 MFP-906 MFP-908 MFP-910 MFP-912 MFP-914

Compression Tube Fittings Brass Bulkhead Union

Item No.

MFP-644 MFP-645

Tube Size

Thread Size

⁄4 3 ⁄8

Replacement Ferrule

1 1

MFP-904 MFP-906

⁄16-24 9 ⁄16-24

MFP-634

MFP-646 MFP-647 MFP-648 MFP-649 MFP-650 MFP-651 MFP-652 MFP-653

MFP-617 MFP-618 MFP-619 MFP-620 MFP-621 MFP-622 MFP-623

1

⁄8 ⁄4 ⁄4 1 ⁄4 3 ⁄8 1 ⁄2 3 ⁄4 1 1

Pipe Size 1

⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄

16 1 8 1 4 3 8 3 8 1 2 3 4

3

⁄8 ⁄4 ⁄8 1 ⁄2 3 ⁄4

⁄8 ⁄4 ⁄8 1 ⁄2 3 ⁄4

5

⁄16-24 ⁄16-24 ⁄16-24 11 ⁄16-20 1-18 7 9

1 1 1 1 1

MFP-902 MFP-904 MFP-906 MFP-908 MFP-912

Tube Size

Pipe Size 1

1

⁄8 ⁄ ⁄ ⁄ ⁄

⁄8 ⁄8 ⁄8 1 ⁄4 1 ⁄4 1

3

16 1 4 1 4 3 8

1

Thread Size 5

⁄ -24 ⁄ -24 ⁄16-24 7 ⁄16-24 9 ⁄16-24 16 3 8

7

Pack Qty.

Replacement Ferrule

1 1 1 1 1

MFP-902 MFP-903 MFP-904 MFP-904 MFP-906

Tube Size

Pipe Size 1

1

⁄4

⁄8

Thread Size 7

⁄16-24

Pack Qty.

Replacement Ferrule

1

MFP-904

Tube Size

Pipe Size 1

1

⁄8 3 ⁄16 3 ⁄16 1 ⁄4 1 ⁄4 3 ⁄8 1 ⁄2 1 ⁄2

⁄8 1 ⁄8 1 ⁄4 1 ⁄8 1 ⁄4 3 ⁄8 3 ⁄8 1 ⁄2

Thread Size 5

⁄16-24 3 ⁄8-24 3 ⁄8-24 7 ⁄16-24 7 ⁄16-24 9 ⁄16-24 11 ⁄16-20 11 ⁄16-20

Pack Qty.

Replacement Ferrule

1 1 1 1 1 1 1 1

MFP-902 MFP-903 MFP-903 MFP-904 MFP-904 MFP-906 MFP-908 MFP-908

Tube Size

Pipe Size 1

1

⁄8 ⁄8 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 1 ⁄2 1 ⁄2 3 ⁄4

⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄

16 1 8 1 8 1 4 3 8 3 8 3 8 1 2 3 4

1 1

Thread Size 5

⁄16-24 ⁄16-24 ⁄16-24 7 ⁄16-24 7 ⁄16-24 9 ⁄16-24 11 ⁄16-20 11 ⁄16-20 1-18 5 7

Pack Qty.

Replacement Ferrule

1 1 1 1 1 1 1 1 1

MFP-902 MFP-902 MFP-904 MFP-904 MFP-904 MFP-906 MFP-908 MFP-908 MFP-912

Compression Tube Fittings Brass Ferrules Item No.

Tube Size

1

3

Replacement Ferrule

Compression Tube Fittings Brass Male Connector

MFP-654 MFP-655 MFP-656 MFP-657 MFP-658 MFP-659 MFP-660 MFP-661 MFP-662

Compression Tube Fittings Brass Male Elbow

Item No.

1

1

Pack Qty.

Compression Tube Fittings Brass Female Connector

Item No.

Pack Qty.

7

1

Item No.

Item No.

Thread Size

1

MFP-635 MFP-636 MFP-637 MFP-638 MFP-639 MFP-640 MFP-641 MFP-642 MFP-643

1

Thread Size

Compression Tube Fittings Brass Female Branch Tee

Thread Size

1

MFP-608 MFP-609 MFP-610 MFP-611 MFP-612 MFP-613 MFP-614 MFP-615 MFP-616

Pipe Size

Compression Tube Fittings Brass Male Run Tee

Compression Tube Fittings Brass Combination Union Tee

Item No.

Tube Size

Thread Size 5

⁄16-24 ⁄16-24 ⁄16-24 7 ⁄16-24 9 ⁄16-24 11 ⁄16-20 1-18 7 7

Pack Qty.

Replacement Ferrule

1 1 1 1 1 1 1

MFP-902 MFP-904 MFP-904 MFP-904 MFP-906 MFP-908 MFP-912

MFP-902 MFP-903 MFP-904 MFP-905 MFP-906 MFP-907 MFP-908 MFP-910 MFP-912 MFP-914

Description

Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass

Sleeve Sleeve Sleeve Sleeve Sleeve Sleeve Sleeve Sleeve Sleeve Sleeve

Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule Ferrule

For Tube Size 1

⁄8 ⁄ ⁄ ⁄16 3 ⁄8 7 ⁄16 1 ⁄2 5 ⁄8 3 ⁄4 7 ⁄8 3

16 1 4

5

Pack Qty.

1 1 1 1 1 1 1 1 1 1

943

AIR FITTINGS Can be used with nylon, soft nylon, polyurethane and polyethylene tubing. Max operating pressure of 150 psig. Proof pressure 430 psig. Ambient and media temperatures of 30-140 degrees Fahrenheit. Threads are NPT unless otherwise noted.

See page 935 for tubing.

Air Fittings One Touch Union Elbow

®

Air Fittings One Touch Male Run Tee

Item No.

Air Fittings One Touch Male Connector

Item No.

SMC

SMC-210 SMC-215 SMC-220 SMC-225

KQ2L01-00 KQ2L07-00 KQ2L11-00 KQ2L13-00

Tube Size OD

SMC-415 SMC-420 SMC-425 SMC-430 SMC-450

Pack Qty.

1

⁄8 ⁄4 ⁄8 1 ⁄2

1 1 1 1

1 3

®

Air Fittings One Touch Extended Male Elbow

®

®

Tube Size OD

SMC

1

1

1

1

3

⁄4 ⁄4 ⁄4 3 ⁄8 1 ⁄2

KQ2Y07-34S KQ2Y07-35S KQ2Y07-36S KQ2Y11-35S KQ2Y13-36S

Item No.

SMC

SMC-10* SMC-15 SMC-20 SMC-25* SMC-30 SMC-35 SMC-40 SMC-45 SMC-50 SMC-55 SMC-60 SMC-70 SMC-75

KQ2H01-32 KQ2H01-34S KQ2H01-35S KQ2H07-32 KQ2H07-34S KQ2H07-35S KQ2H07-36S KQ2H11-34S KQ2H11-35S KQ2H11-36S KQ2H11-37S KQ2H13-36S KQ2H13-37S

Tube Size OD 1

⁄8 1 ⁄8 1 ⁄8 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄2

Thread NPT

5

⁄16 7 ⁄16 9 ⁄16 5 ⁄16 1 ⁄2 9 ⁄16 11 ⁄16 11 ⁄16 11 ⁄16 11 ⁄16 7 ⁄8 7 ⁄8 7 ⁄8

.97 .87 .77 .94 .89 .87 .91 1.20 1.32 1.14 1.06 1.32 1.18

1 1 1 1 1 1 1 1 1 1 1 1 1

Item No.

SMC-230 SMC-240 SMC-245 SMC-255

Air Fittings One Touch Straight Union

Item No.

SMC-105 SMC-110 SMC-115 SMC-120

SMC

KQ2H01-00 KQ2H07-00 KQ2H11-00 KQ2H13-00

®

Tube Size OD 1

⁄8 1 ⁄4 3 ⁄8 1 ⁄2

Body Dia.

Lgth.

Pack Qty.

.38 .52 .70 .85

1.24 1.36 1.67 1.75

1 1 1 1

Air Fittings One Touch Male Elbow

SMC

KQ2W01-34S KQ2W07-34S KQ2W07-35S KQ2W11-35S

Tube Size OD

Thread NPT Height

1

1

®

Tube Size OD

SMC

1

1

1

1

⁄8 ⁄4 ⁄4 3 ⁄8

⁄8 ⁄8 ⁄4 1 ⁄4

1.50 1.69 1.85 2.32

1 1 1 1

Pack Qty.

1

⁄8 1 ⁄4

1 1 ®

Air Fittings One Touch Branch Tee

®

Item No.

SMC

SMC-625 SMC-630 SMC-635 SMC-645 SMC-650

KQ2U07-34S KQ2U07-35S KQ2U07-36S KQ2U11-36S KQ2U11-37S

Tube Size OD

Thread NPT

1

1

1

1

1

3

⁄4 ⁄4 ⁄4 3 ⁄8 3 ⁄8

Pack Qty.

⁄8 ⁄4 ⁄8 3 ⁄8 1 ⁄2

1 1 1 1 1

Air Fittings One Touch Bulkhead Union

Item No.

®

1 1 1 1 1

Pack Qty.

Note: Height value is after thread installation.

*UNF threads

⁄8 ⁄4 ⁄8 1 ⁄4 3 ⁄8

Air Fittings One Touch Branch Y

Pack Hex Lgth. Qty.

10-32 1 ⁄8 1 ⁄4 10-32 1 ⁄8 1 ⁄4 3 ⁄8 1 ⁄8 1 ⁄4 3 ⁄8 1 ⁄2 3 ⁄8 1 ⁄2

Pack Qty.

Air Fittings One Touch Union Y

SMC-605 KQ2U01-00 SMC-610 KQ2U07-00 Item No.

Thread NPT

1

Item No.

SMC

SMC-305 SMC-310 SMC-315 SMC-320 SMC-325 SMC-330 SMC-335

KQ2T01-34S KQ2T01-35S KQ2T07-34S KQ2T07-35S KQ2T07-36S KQ2T11-35S KQ2T11-36S

Tube Size OD

Thread NPT Height

1

1

1

1

1

1

⁄8 ⁄8 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8

⁄8 ⁄4 ⁄8 1 ⁄4 3 ⁄8 1 ⁄4 3 ⁄8

Pack Qty.

.89 .96 1.02 1.10 1.16 1.28 1.34

SMC

SMC-475 KQ2E01-00 SMC-480 KQ2E07-00 SMC-485 KQ2E11-00

1 1 1 1 1 1 1

®

Tube Size OD 1

⁄8 1 ⁄4 3 ⁄8

Thread UNF

Pack Qty.

1

⁄2-20 9 ⁄16-18 7 ⁄8-14

1 1 1 ®

Air Fittings One Touch Bulkhead Connector

Note: Height value is after thread installation.

Item No.

SMC

SMC-130* SMC-135 SMC-140 SMC-145* SMC-150 SMC-155 SMC-160 SMC-165 SMC-170 SMC-175 SMC-180 SMC-185 SMC-190

KJL01-32 KQ2L01-34S KQ2L01-35S KQ2L07-32 KQ2L07-34S KQ2L07-35S KQ2L07-36S KQ2L11-35S KQ2L11-36S KQ2L11-37S KQ2L13-35S KQ2L13-36S KQ2L13-37S

Tube Size OD 1

⁄8 1 ⁄8 1 ⁄8 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄2 1 ⁄2

Thread NPT Height

10-32 1 ⁄8 1 ⁄4 10-32 1 ⁄8 1 ⁄4 3 ⁄8 1 ⁄4 3 ⁄8 1 ⁄2 1 ⁄4 3 ⁄8 1 ⁄2

.66 .89 .96 .95 1.02 1.10 1.16 1.28 1.34 1.44 1.44 1.52 1.57

Pack Qty.

1 1 1 1 1 1 1 1 1 1 1 1 1

*UNF threads Note: Height value is after thread installation.

944

Air Fittings One Touch Union Tee

®

Item No.

SMC

SMC-495 KQ2E01-35 SMC-500 KQ2E07-35 SMC-505 KQ2E11-36

Tube Size OD 1

⁄8 1 ⁄4 3 ⁄8

Thread NPT

Pack Qty.

1

⁄4 1 ⁄4 3 ⁄8

1 1 1

Air Fittings One Touch Plug Item No.

SMC

SMC-380 SMC-385 SMC-390 SMC-395

KQ2T01-00 KQ2T07-00A KQ2T11-00 KQ2T13-00

Tube Size OD 1

⁄8 1 ⁄4 3 ⁄8 1 ⁄2

Pack Qty.

1 1 1 1

Item No.

SMC

SMC-520 KQ2P-01 SMC-525 KQ2P-07 SMC-530 KQ2P-11

®

Tube Size OD 1

⁄8 ⁄4 ⁄8

1 3

Pack Qty.

1 1 1

STAINLESS STEEL PNEUMATIC CYLINDERS s s s s

Polished ID 304 stainless tubes for low break away Precision rolled construction for a solid, leak-proof cylinder Machined aluminum heads, clear anodized for extra protection Ground, polished and roller burnished 303 stainless rods for longer life cycles s Temperature range -30 to 230 degrees Fahrenheit, maximum 250 psi

Force = Power Factor (IA Sq.) x Pressure (PSIG) Bore Size Power Factor 5 ⁄16 .07 1 ⁄2 .19 5 ⁄8 .31 3 ⁄4 .44 11⁄16 .88 11⁄4 1.20 11⁄2 1.70 13⁄4 2.40 2 3.10 21⁄2 4.90

See page 946 for mounting accessories.

5 ⁄16" Bore Stud Mount Double Acting

3/8

5/16

15/32

1/2

11/32 11/32

1/2

Dia.

3/32

3/8

1

⁄2 1 11⁄2

-27 NPT

-16 Thd.

-27 NPT

Dia.

10-32 Thd.

10-32 Thd.

L

Pack Qty.

21⁄16 29⁄16 31⁄16

1 1 1

Stroke

PAC-5 SDR-05-1/2 PAC-10 SDR-05-1 PAC-15 SDR-05-1-1/2

-20 Thd.

2 Mt’g Holes Thru .116 Dia.

5/32

5-40 Thd. 3/8-24 Thd.

Clippard

L

1

1” 1 Dia. Dia.

5/16

Item No.

11⁄2" Bore Clevis Mount Double Acting

L

Item No.

Clippard

Stroke

L

Pack Qty.

PAC-230 PAC-235 PAC-240 PAC-245

CDR-24-1 CDR-24-2 CDR-24-3 CDR-24-4

1 2 3 4

51⁄2 61⁄2 71⁄2 81⁄2

1 1 1 1

Note: Furnished without nuts.

Note: Furnished with nut.

1 ⁄2" Bore Universal Mount Double Acting

L

1 ⁄2" Bore Stud Mount Double Acting

L

Flats

Dia. 10-32 Thd. -20 Thd.

Item No.

Clippard

10-32 Thd.

Stroke

5

⁄2 2

10-32 Thd.

2 ⁄8 41⁄8

1 1

Note: Furnished with nut.

Item No.

Clippard

10-32 Thd.

Stroke

L

Pack Qty.

1 11⁄2

313⁄16 45⁄16

1 1

PAC-50 UDR-08-1 PAC-55 UDR-08-1-1/2

5 ⁄8" Bore Stud Mount Double Acting

Dia.

-20 Thd. (both ends)

Pack Qty.

L

1

PAC-20 SDR-08-1/2 PAC-35 SDR-08-2

10-32 Thd.

Note: Furnished without nuts.

5 ⁄8" Bore Universal Mount Double Acting

L

L 5/8

1/2

3/8

Flats Dia.

5/16

1/4

9/16

11/16

Dia.

10-32 Thd. -20 Thd. 10-32 Thd.

10-32 Thd.

10-32 Thd.

11/16

7/16-20 Thd.

5 /32 Dia.

Dia. 10-32 Thd.

(both ends)

10-32 Thd.

11/16

Dia.

Item No.

Clippard

L

Pack Qty.

25⁄8 31⁄8 35⁄8 41⁄8 51⁄8

1 1 1 1 1

Stroke 1

PAC-70 SDR-10-1/2 PAC-75 SDR-10-1 PAC-80 SDR-10-1-1/2 PAC-85 SDR-10-2 PAC-90 SDR-10-3

⁄2 1 11⁄2 2 3

Note: Furnished with nut.

Item No.

Clippard

L

Pack Qty.

35⁄16 313⁄16 45⁄16 413⁄16 513⁄16

1 1 1 1 1

Stroke 1

PAC-100 UDR-10-1/2 PAC-105 UDR-10-1 PAC-110 UDR-10-1 1/2 PAC-115 UDR-10-2 PAC-120 UDR-10-3

⁄2 1 11⁄2 2 3

Note: Furnished without nuts.

11⁄16" Bore Stud Mount Double Acting

11⁄16" Bore Universal Mount Double Acting

L 5/8

1/2

3/16

L 5/8 5/8

1 /2

9/32

9/16

9/16

3/8

9/32

1 1/8 Dia.

7/8 1/8 Flats Dia.

5/16-24 NPT 5/16-24 NPT

9/16

5/8-18 NPT

5/8-18 NPT

9/16

1/8-27 NPT

1/8-27 NPT

(both ends)

1/8- 27 NPT

1/4 Dia.

1/8- 27 NPT

Item No.

Clippard

Stroke

L

Pack Qty.

PAC-130 PAC-135 PAC-140 PAC-145

SDR-17-1 SDR-17-2 SDR-17-3 SDR-17-4

1 2 3 4

41⁄8 51⁄8 61⁄8 71⁄8

1 1 1 1

Item No.

Clippard

PAC-150 UDR-17-1 PAC-155 UDR-17-2 PAC-160 UDR-17-3

Stroke

L

Pack Qty.

1 2 3

5 6 7

1 1 1

Note: Furnished without nuts.

Note: Furnished with nut.

11⁄4" Bore Stud Mount Double Acting

1

1/4

5/8

L

11⁄4" Bore Universal Mount Double Acting

L

1

3/4

1 Dia.

7/8 1 5/16 Flats Dia.

-24 Thd. 3 /8-24 Thd. 3 /4-16 Thd.

3 /4

1/8-27 NPT

-27 NPT

-27 NPT Dia.

-16 Thd. (both ends)

1/8-27 NPT

Item No.

Clippard

Stroke

L

Pack Qty.

Item No.

Clippard

Stroke

L

Pack Qty.

PAC-170 PAC-175 PAC-180 PAC-185

SDR-20-1 SDR-20-2 SDR-20-3 SDR-20-4

1 2 3 4

43⁄4 53⁄4 63⁄4 73⁄4

1 1 1 1

PAC-190 PAC-195 PAC-200 PAC-205

UDR-20-1 UDR-20-2 UDR-20-3 UDR-20-4

1 2 3 4

57⁄8 67⁄8 77⁄8 87⁄8

1 1 1 1

Note: Furnished with nut.

Note: Furnished without nuts.

945

STAINLESS STEEL PNEUMATIC CYLINDERS & MOUNTS 11⁄2" Bore Stud Mount Double Acting

2" Bore Universal Mount Double Acting

L

1 1 Flats

L

-20 Thd. -27 NPT

11/4

-27 NPT

-16 Thd.

Item No.

Clippard

PAC-210 PAC-215 PAC-220 PAC-225

47⁄16 57⁄16 67⁄16 77⁄16

1 2 3 4

13/8

Pack Qty.

L

1/2-20

1 1 1 1 Item No.

L

13⁄4" Bore Stud Mount Double Acting

PAC-310 PAC-315 PAC-320 PAC-325 -200 Thd. 1-14 Thd.

Clippard

2 1/16 Dia.

Thd.

L

Pack Qty.

2 4

63⁄8 83⁄8

1 1

Clippard

L

1 2 3 4

11

UDR-32-1 UDR-32-2 UDR-32-3 UDR-32-4

7/8

27 /32 1/8

5

/16

1 1 1 1

1

27/32

7/16

1/8

1/2-20

2 1/16 Dia.

Thd. 1/4 -18 NPT

3/8 Dia. 15/32

1/4 -18 NPT

Clippard

Stroke

L

Pack Qty.

1 2 3

55⁄16 65⁄16 75⁄16

1 1 1

PAC-290 SDR-32-1 PAC-295 SDR-32-2 PAC-300 SDR-32-3

Item No.

PAC-330 PAC-335 PAC-340 PAC-345

Clippard

3 /4

2 5/8 Dia.

1 1/2 5/8

7/8

1 3/8 5/8

Dia.

Pack Qty.

L 13/16

1 3/8-12 Thd.

Item No.

3/8

21⁄2" Bore Universal Mount Double Acting

L 13 /16

NPT

6 ⁄16 711⁄16 811⁄16 911⁄16

11/4

1 1/4

1/4-18

NPT

Stroke

Note: Furnished with nut.

2" Bore Stud Mount Double Acting

1/4-18

Note: Furnished without nuts.

-18 NPT

-18 NPT

Stroke

PAC-255 SDR-28-2 PAC-265 SDR-28-4

3/4

7/16

5 /8

11/4-12 Thd. (both ends)

Note: Furnished with nut.

Item No.

1

15 /32

1/8

7/8

Stroke

SDR-24-1 SDR-24-2 SDR-24-3 SDR-24-4

27/32

13 /16

Stroke

L

1 2 3 4

11

UDR-40-1 UDR-40-2 UDR-40-3 UDR-40-4

Pack Qty.

6 ⁄16 711⁄16 811⁄16 911⁄16

Note: Furnished with nut.

Note: Furnished without nuts.

Pneumatic Cylinder Mounts Zinc Plated Steel Rod Clevis Assemblies

Pneumatic Cylinder Mounts Zinc Plated Steel Clevis Mounting Brackets

1 1 1 1

F

E

.140

D

1 /8

C B A

3 /8

#5-40 Thd.

9/16

C H

J

D

1/8” Dia.-thru

E

(Both sides)

1/4 Sq.

A

B

G

H

Stock LOCKWASHER

Type A

Item No.

Type

PAC-610* PAC-620 PAC-640 PAC-650 PAC-660 PAC-670

A B B B B B

F

3/32

For Bore Size

A

B

C

5

⁄16 1 ⁄2 & 5⁄8 11⁄16 11⁄4 11⁄2 2 & 21⁄2

3

⁄ ⁄ ⁄8 3 ⁄8 3 ⁄8

3

⁄8 ⁄2 ⁄4 3 ⁄4 3 ⁄4

16 1 4

1

3

3

D

E

F

See Line Drawing 25 3 ⁄32 15⁄16 ⁄4 31 ⁄32 13⁄16 15⁄16 7 11 1 ⁄32 1 ⁄16 15⁄16 17⁄32 111⁄16 15⁄16 17⁄32 111⁄16 15⁄16

G

J

Type A

G

Type B

H

for Dimensions 3 10-32 1⁄8 ⁄16 5 1 ⁄16-24 3⁄16 ⁄4 3 3 1 ⁄8-24 ⁄4 ⁄8 7 3 ⁄16-20 1⁄4 ⁄8 1 3 ⁄2-20 5⁄16 ⁄8

J

Pack Qty.

9 16 11 16 15 16 15 16 15 16

1 1 1 1 1 1

⁄ ⁄ ⁄ ⁄ ⁄

13/32 Dia. 7/32 3 /4

3 /8

13/32

7/16

* PAC-610 includes pin and two E-clips

Pneumatic Cylinder Mounts Zinc Plated Steel Foot Mounting Brackets

1 3/16

1 3 /8

3/8 Dia. Both sides

1 7/8 1 1/2 A

3 /8

K J

E

F

B C

H

Item No.

For Bore Size

A

7 PAC-840 1⁄2 & 5⁄8 ⁄16 PAC-860 3⁄4 & 11⁄16 5⁄8 PAC-870 11⁄4 & 11⁄2 3⁄4 PAC-890 2 & 21⁄2 13⁄8

946

B 1

⁄16 1 ⁄8 5 ⁄32 1 ⁄4

C

13⁄8 17⁄8 21⁄2 31⁄8

D 9

⁄16 13 ⁄16 1 11⁄2

E 7

⁄8 13⁄8 13⁄4 21⁄2

1 3/4

Type B

D G

F 13

⁄64 17 ⁄64 17 ⁄64 21 ⁄64

G 1

⁄2 3 ⁄4 15 ⁄16 11⁄8

H

1 11⁄2 17⁄8 21⁄4

J 11

⁄16 1 11⁄2 15⁄8

K 3

⁄8 9 ⁄16 3 ⁄4 1

Pack Qty.

1 1 1 1

Item No.

For Type Bore Size

A

B

C

D

PAC-720 PAC-730 PAC-740 PAC-750 PAC-760

1

5

7

3

1

A A A A B

5

⁄2 & ⁄8 1 ⁄16 ⁄4 & 11⁄16 2 21⁄8 11⁄4 25⁄8 11⁄2 1 2 & 2 ⁄2

3

Note: Clevis pin included.

E 5

F 13

G 3

H 9

⁄8 ⁄4 ⁄2 ⁄32 ⁄64 ⁄4 ⁄16 11⁄4 11⁄8 13⁄16 1⁄4 17⁄64 13⁄16 7⁄8 13⁄8 11⁄8 13⁄16 1⁄4 17⁄64 13⁄16 7⁄8 3 17⁄8 11⁄2 1 ⁄8 17⁄64 13⁄4 13⁄8 See Line Drawing for Dimensions

J 13

⁄64 ⁄16 ⁄16 3 ⁄8

5 5

Pack Qty.

1 1 1 1 1

AIR CYLINDERS Type 304 stainless steel polished to a micro-inch finish on the ID to provide for low friction and long life on cylinder tube. OD has matte finish. Heads and caps are made of aluminum construction for smooth breakaway. Piston rods are made of a 303 stainless steel. All cylinders are pre-lubricated. All piston and rod seals are of a lip seal construction. Maximum pressure 250 psi. Temperature rating -10 to 165 degrees Fahrenheit. MFP-1 through MFP-27 include a mounting nut.

Air Cylinders Front Nose Mount - Double Acting C + Stroke D

H

B

E C + Stroke

D

F Port G Mounting Nut

B

A

E

Type A F Port

F Port G Mounting Nut

A H

Type B

Item No.

Parker

Type

MFP-1 MFP-2 MFP-3 MFP-4 MFP-5 MFP-6 MFP-7 MFP-8 MFP-9 MFP-10 MFP-11 MFP-12 MFP-13 MFP-14 MFP-15 MFP-16 MFP-17 MFP-19 MFP-20 MFP-21 MFP-22 MFP-23 MFP-24 MFP-25 MFP-26 MFP-27 MFP-28* MFP-29* MFP-30* MFP-31* MFP-32* MFP-33* MFP-34* MFP-35* MFP-36*

.31DSR-1.00 .31DSR-2.00 .31DSR3.00 .31DSR4.00 .75DSR1.00 .75DSR-2.00 .75DSR-3.00 .75DSR-4.00 .75DSR-5.00 .75DSR6.00 .88DSR-1.00 .88DSR-2.00 .88DSR-3.00 .88DSR4.00 .88DSR5.00 .88DSR6.00 1.25DSR-2.00 1.25DSR-4.00 1.25DSR5.00 1.25DSR6.00 1.50DSR1.00 1.50DSR-2.00 1.50DSR-3.00 1.50DSR-4.00 1.50DSR-5.00 1.50DSR6.00 2.00DSR-2.00 2.00DSR-3.00 2.00DSR-4.00 2.00DSR-5.00 2.00DSR-6.00 3.00DSR3.00 3.00DSR-4.00 3.00DSR5.00 3.00DSR-6.00

A A A A A A A A A A A A A A A A B B B B B B B B B B B B B B B B B B B

Bore 5

⁄16 5 ⁄16 5 ⁄16 5 ⁄16 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 11⁄4 11⁄4 11⁄4 11⁄4 11⁄2 11⁄2 11⁄2 11⁄2 11⁄2 11⁄2 2 2 2 2 2 3 3 3 3

Stroke

A

B

C

D

E

F

1 2 3 4 1 2 3 4 5 6 1 2 3 4 5 6 2 4 5 6 1 2 3 4 5 6 2 3 4 5 6 3 4 5 6

5-40 5-40 5-40 5-40 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 1 ⁄2-20 1 ⁄2-20 1 ⁄2-20 1 ⁄2-20 1 ⁄2-20 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18

.375 .375 .375 .375 .500 .500 .500 .500 .500 .500 .500 .500 .500 .500 .500 .500 .750 .750 .750 .750 .750 .750 .750 .750 .750 .750 .880 .880 .880 .880 .880 1.25 1.25 1.25 1.25

1.64 1.64 1.64 1.64 2.97 2.97 2.97 2.97 2.97 2.97 2.94 2.94 2.94 2.94 2.94 2.94 4.00 4.00 4.00 4.00 3.69 3.69 3.69 3.69 3.69 3.69 4.69 4.69 4.69 4.69 4.69 5.25 5.25 5.25 5.25

.500 .500 .500 .500 .860 .860 .860 .860 .860 .860 .930 .930 .930 .930 .930 .930 1.34 1.34 1.34 1.34 1.56 1.56 1.56 1.56 1.56 1.56 2.08 2.08 2.08 2.08 2.08 3.16 3.16 3.16 3.16

.360 .360 .360 .360 .810 .810 .810 .810 .810 .810 .930 .930 .930 .930 .930 .930 .88 .88 .88 .88 .88 .88 .88 .88 .88 .88 1.25 1.25 1.25 1.25 1.25 2.00 2.00 2.00 2.00

10-32 10-32 10-32 10-32 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄4-18 1 ⁄4-18 1 ⁄4-18 1 ⁄4-18 1 ⁄4-18 3 ⁄8-18 3 ⁄8-18 3 ⁄8-18 3 ⁄8-18

G

H

Pack Qty.

⁄8-24 3 ⁄8-24 3 ⁄8-24 3 ⁄8-24 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 11⁄4-12 11⁄4-12 11⁄4-12 11⁄4-12 11⁄4-12 11⁄2-12 11⁄2-12 11⁄2-12 11⁄2-12

.47 .47 .47 .47 .97 .97 .97 .97 .97 .97 .97 .97 .97 .97 .97 .97 1.62 1.62 1.62 1.62 1.50 1.50 1.50 1.50 1.50 1.50 1.84 1.84 1.84 1.84 1.84 2.09 2.09 2.09 2.09

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

3

*Mounting nut must be ordered separately, see page 948.

Air Cylinders Front Block Mount - Double Acting

C + Stroke

C + Stroke E

B

D

B

E

D

#8-32 UNC-2B (2 Holes)

#10-32 UNF-2B 2 Holes on a 1.00 Dia. Bolt Circle

.38

B

A

A

.11 Dia. Thru (2 Places) F Port

#8-32 UNC-2B 2 Holes on a .75 Dia. Bolt Circle

Type A Item No.

Parker

Type

MFP-48 MFP-49 MFP-50 MFP-51 MFP-52 MFP-53 MFP-54 MFP-55 MFP-56 MFP-57 MFP-58 MFP-59 MFP-60 MFP-61

.31BFDSR-1.00 .31BFDSR2.00 .31BFDSR3.00 .31BFDSR-4.00 .44BFDSR-1.0 .44BFDSR2.00 .44BFDSR3.00 .44BFDSR4.00 .75BFDSR-1.00 .75BFDSR-2.00 .75BFDSR-3.00 .75BFDSR-4.00 .75BFDSR5.00 .75BFDSR-6.00

A A A A B B B B C C C C C C

A

F Port

Opposite Side

.62

E

.50 Dia.

5

⁄16 5 ⁄16 5 ⁄16 5 ⁄16 7 ⁄16 7 ⁄16 7 ⁄16 7 ⁄16 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4

F Port 2 Holes Drilled & C'Bored for #10-32 Cap Screws.

1/4-20 UNC-2B Opposite Side

#10-32 Port

Type B

Bore

C + Stroke D

Type C

Stroke

A

B

C

D

E (Sq.)

F

Pack Qty.

1 2 3 4 1 2 3 4 1 2 3 4 5 6

5-40 5-40 5-40 5-40 10-32 10-32 10-32 10-32 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28

.380 .380 .380 .380 .500 .500 .500 .500 .750 .750 .750 .750 .750 .750

1.72 1.72 1.72 1.72 2.12 2.12 2.12 2.12 3.22 3.22 3.22 3.22 3.22 3.22

.710 .710 .710 .710 .880 .880 .880 .880 1.12 1.12 1.12 1.12 1.12 1.12

.50 .50 .50 .50 .75 .75 .75 .75 1.00 1.00 1.00 1.00 1.00 1.00

10-32 10-32 10-32 10-32 10-32 10-32 10-32 10-32 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27

1 1 1 1 1 1 1 1 1 1 1 1 1 1

947

AIR CYLINDERS Air Cylinders Rear Pivot Mount - Double Acting

MFP-62 through MFP-106 include a mounting nut.

Item No.

MFP-62 MFP-63 MFP-64 MFP-65 MFP-66 MFP-67 MFP-68 MFP-69 MFP-70 MFP-71 MFP-72 MFP-73 MFP-74 MFP-75 MFP-76 MFP-77 MFP-78 MFP-79 MFP-80 MFP-81 MFP-82 MFP-84 MFP-85 MFP-86 MFP-87 MFP-88 MFP-100 MFP-101 MFP-102 MFP-103 MFP-104 MFP-105 MFP-106 MFP-107* MFP-108* MFP-109* MFP-110* MFP-111* MFP-112* MFP-113* MFP-114* MFP-115* MFP-118* MFP-119*

Parker

Bore

Stroke

5

⁄16 ⁄16 ⁄16 5 ⁄16 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 11⁄4 11⁄4 11⁄4 11⁄4 11⁄4 11⁄4 11⁄2 11⁄2 11⁄2 11⁄2 11⁄2 11⁄2 11⁄2 2 2 2 2 2 2 2 3 3 3 3

.31DXPSR1.00 .31DXPSR2.00 .31DXPSR-3.00 .31DXPSR4.00 .75DXPSR1.00 .75DXPSR-2.00 .75DXPSR3.00 .75DXPSR-4.0 .75DXPSR-5.00 .75DXPSR6.00 .75DXPSR7.00 .75DXPSR-8.00 .88DXPSR1.00 .88DXPSR-2.00 .88DXPSR3.00 .88DXPSR-4.0 .88DXPSR5.00 .88DXPSR6.00 .88DXPSR7.00 .88DXPSR-8.0 1.25DXPSR2.00 1.25DXPSR-4.00 1.25DXPSR-5.00 1.25DXPSR-6.

1.25DXPSR7.00 1.25DXPSR-8.00 1.50DXPSR-2.00 1.50DXPSR-3.00 1.50DXPSR-4.00 1.50DXPSR-5.00 1.50DXPSR-6.00 1.50DXPSR7.00 1.50DXPSR-8.

2.00DXPSR-2.00 2.00DXPSR-3.00 2.00DXPSR-4.

2.00DXPSR5.00 2.00DXPSR-6.

2.00DXPSR-7.00 2.00DXPSR-8.00 3.00DXPSR-3.00 3.00DXPSR4.00 3.00DXPSR7.00 3.00DXPSR-8.00

A

1 2 3 4 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 2 4 5 6 7 8 2 3 4 5 6 7 8 2 3 4 5 6 7 8 3 4 7 8

5 5

B

5-40 5-40 5-40 5-40 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 1 ⁄2-20 1 ⁄2-20 1 ⁄2-20 1 ⁄2-20 1 ⁄2-20 1 ⁄2-20 1 ⁄2-20 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18

C

.38 .38 .38 .38 .50 .50 .50 .50 .50 .50 .50 .50 .50 .50 .50 .50 .50 .50 .50 .50 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .75 .88 .88 .88 .88 .88 .88 .88 1.25 1.25 1.25 1.25

D (Sq.)

2.19 2.19 2.19 2.19 4.03 4.03 4.03 4.03 4.03 4.03 4.03 4.03 3.84 3.84 3.84 3.84 3.84 3.84 3.84 3.84 5.12 5.12 5.12 5.12 5.12 5.12 5.00 5.00 5.00 5.00 5.00 5.00 5.00 6.06 6.06 6.06 6.06 6.06 6.06 6.06 7.12 7.12 7.12 7.12

Port F

E

.50 .50 .50 .50 .86 .86 .86 .86 .86 .86 .86 .86 .93 .93 .93 .93 .93 .93 .93 .93 1.34 1.34 1.34 1.34 1.34 1.34 1.56 1.56 1.56 1.56 1.56 1.56 1.56 2.08 2.08 2.08 2.08 2.08 2.08 2.08 3.16 3.16 3.16 3.16

.25 .25 .25 .25 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .38 .50 .50 .50 .50 .50 .50 .62 .62 .62 .62 .62 .62 .62 .75 .75 .75 .75 .75 .75 .75 .88 .88 .88 .88

Mtg. Nut H

G

10-32 10-32 10-32 10-32 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄4-18 1 ⁄4-18 1 ⁄4-18 1 ⁄4-18 1 ⁄4-18 1 ⁄4-18 1 ⁄4-18 3 ⁄8-18 3 ⁄8-18 3 ⁄8-18 3 ⁄8-18

3

2.03 2.03 2.03 2.03 3.75 3.75 3.75 3.75 3.75 3.75 3.75 3.75 3.56 3.56 3.56 3.56 3.56 3.56 3.56 3.56 4.72 4.72 4.72 4.72 4.72 4.72 4.63 4.63 4.63 4.63 4.63 4.63 4.63 5.62 5.62 5.62 5.62 5.62 5.62 5.62 6.50 6.50 6.50 6.50

⁄8-24 ⁄8-24 ⁄8-24 3 ⁄8-24 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 11⁄4-12 11⁄4-12 11⁄4-12 11⁄4-12 11⁄4-12 11⁄4-12 11⁄4-12 11⁄2-12 11⁄2-12 11⁄2-12 11⁄2-12 3 3

I

Pack Qty.

.125 .125 .125 .125 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .251 .376 .376 .376 .376 .376 .376 .376 .376 .376 .376 .376 .376 .376 .376 .500 .500 .500 .500

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

*Mounting nut must be ordered separately. See below.

Air Cylinder Accessories Piston Rod Clevises A Thd. B C D F

E J K L

G Nut

Item No.

Parker

MFP-120 MFP-121 MFP-122 MFP-123 MFP-124

L071300025 L07130-0200 L071300400 L071300500 L071300600

Use With Cylinder Size 5

⁄16 3 ⁄4, 7⁄8 11⁄4, 11⁄2 2 3

H Dia. Pin

A

B

C

D

E

F

G

H

J

K

L

Pack Qty.

5-40 1 ⁄4-28 7 ⁄16-20 1 ⁄2-20 5 ⁄8-18

.31 .50 .75 .75 1.00

.44 .94 1.31 1.31 2.25

.56 1.19 1.69 1.69 2.75

.38 .68 .94 .94 1.50

.11 .16 .25 .31 .38

5-40 1 ⁄4-28 7 ⁄16-20 1 ⁄2-20 5 ⁄8-18

.12 .25 .38 .38 .50

.13 .25 .38 .38 .50

.31 .50 .75 .75 1.00

.50 .69 1.03 1.03 1.38

1 1 1 1 1

Air Cylinder Accessories Mounting Nuts B

A

C UNF-2B

Item No.

Parker

MFP-550 L073801200 MFP-551 L073801500

948

Used On Bore

2 3

A

1.88 2.25

C

Pack Qty.

1 ⁄4-12 11⁄2-12

1 1

B

.50 .84

1

AIR CYLINDERS & ACCESSORIES Stainless steel cylinder tube for breakaway friction and attractive appearance. Clear anodized head covers for protection against corrosion. The piston rod is stainless steel on the 3⁄4” and 7⁄8” sizes and hard chrome plated steel on the other sizes. Max pressure 250 psi.

Pre-lubricated.

Air Cylinder Double Acting - Front Nose

®

Air Cylinder Double Acting - Rear Pivot Mount

C + Stroke

B

B

C + Stroke

A UNF-2A

Item No.

SMC-4003 SMC-4005 SMC-4007 SMC-4011 SMC-4013 SMC-4015 SMC-4017 SMC-4021 SMC-4027 SMC-4029 SMC-4031 SMC-4033 SMC-4037 SMC-4039 SMC-4041 SMC-4043 SMC-4045 SMC-4049 SMC-4051 SMC-4053 SMC-4055 SMC-4061

Bore 3

⁄4 ⁄4 ⁄4 3 ⁄4 3 ⁄4 7 ⁄8 7 ⁄8 7 ⁄8 11⁄16 11⁄16 11⁄16 11⁄16 11⁄16 11⁄4 11⁄4 11⁄4 11⁄4 11⁄4 11⁄2 11⁄2 11⁄2 11⁄2 3 3

Stroke

1 2 3 5 6 1 2 4 1 2 3 4 6 1 2 3 4 6 1 2 3 6

1/8 NPTF

A

B

C

D

E

F

⁄4-28 ⁄4-28 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 1 ⁄4-28 5 ⁄16-24 5 ⁄16-24 5 ⁄16-24 5 ⁄16-24 5 ⁄16-24 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20

.50 .50 .50 .50 .50 .50 .50 .50 .50 .50 .50 .50 .50 .75 .75 .75 .75 .75 .75 .75 .75 .75

2.97 2.97 2.97 2.97 2.97 2.94 2.94 2.94 3.25 3.25 3.25 3.25 3.25 4.00 4.00 4.00 4.00 4.00 3.69 3.69 3.69 3.69

.62 .62 .62 .62 .62 .75 .75 .75 .88 .88 .88 .88 .88 1.06 1.06 1.06 1.06 1.06 1.25 1.25 1.25 1.25

.86 .86 .86 .86 .86 .93 .93 .93 1.12 1.12 1.12 1.12 1.12 1.32 1.32 1.32 1.32 1.32 1.56 1.56 1.56 1.56

.75 .75 .75 .75 .75 .75 .75 .75 .88 .88 .88 .88 .88 1.06 1.06 1.06 1.06 1.06 1.25 1.25 1.25 1.25

1 1 1

A UNF-2A H UNF-2A

D

1/8 NPTF G Mounting Nut

E

F

E

F

®

G

Pack Qty.

⁄8-18 ⁄8-18 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

5 5 5

Item No.

Bore Stroke

SMC-4129 3⁄4 SMC-4131 3⁄4 SMC-4133 3⁄4 SMC-4155 11⁄16 SMC-4157 11⁄16 SMC-4179 11⁄2

1/8 NPTF

A

B

1

1 2 3 2 3 2

F

1

⁄4-28 1 ⁄4-28 1 ⁄4-28 5 ⁄16-24 5 ⁄16-24 7 ⁄16-20

⁄2 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 3 ⁄4

D

G UNF-2A

C

D

E

F

4.03 4.03 4.03 4.12 4.12 4.75

.38 .38 .38 .38 .38 .62

.86 .86 .86 1.12 1.12 1.56

.75 .75 .75 .88 .88 1.25

H

Pack Qty.

⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 3 ⁄4-16

1 1 1 1 1 1

G 5

5

⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 —

Air Cylinder Double End

®

Port Size 2-NOM. 10-32 UNF A

D

B

C + Stroke

Item No.

SMC-5083

Bore 5

⁄8

E

Stroke

A

B

C

D

E

Pack Qty.

8

10-32

1.08

3.66

.60

.71

1

Miniature Stainless Steel Bodies Double Acting - Single Rod These stainless cylinders offer space savings, high performance, and interchangeability with other stainless cylinders. A wear ring extends the seal life and a bronze rod bushing is standard.

Air Cylinder Front Nose

®

B

Item No.

Port Size 2-NOM. 10-32 UNF

A

F

E

C + Stroke

SMC-5015 SMC-5021 SMC-5029 SMC-5031 SMC-5037

D

Air Cylinder Accessories Multi-Connectors

®

These multi-connectors save a great deal of time when connecting or disconnecting multi-line pneumatic components because multiple tubes can be handled in a one-touch operation without error. Comes with one-touch fittings which allows for easy tubing set up. Excellent for exchanging panels when a failure occurs.

There is also a substantial reduction in mounting area in comparison to a panel requiring many bulkhead unions. Max operating pressure 150 psi.

Item No.

SMC-7060 SMC-7065

Tube Size 1

⁄8 ⁄4

1

No. of Tubes

Pack Qty.

Item No.

10 10

1 1

SMC-7075

Tube Size 1

⁄4

No. of Tubes

Pack Qty.

20

1

Bore 3

⁄8 3 ⁄8 5 ⁄8 5 ⁄8 5 ⁄8

Stroke

A

1 3 1 ⁄2 1 3

6-40 6-40 10-32 10-32 10-32

B

C

D

E

F

Pack Qty.

⁄16-24 5 ⁄16-24 3 ⁄8-24 3 ⁄8-24 3 ⁄8-24

2.91 2.91 2.95 2.95 2.95

.47 .47 .71 .71 .71

.37 .37 .37 .37 .37

.60 .60 .60 .60 .60

1 1 1 1 1

5

Air Cylinder Accessories Floating Joints

®

These floating joints fit on the end of pneumatic cylinders to protect against cylinder misalignment and to align deflected loads. The compact design allows for high loading, maximum 5 degree misalignment.

Sealed and pre-lubricated for long life. Not suitable for rotation operations.

5 5 F

A-THD

A-THD

5

B

K D E

C

Item No.

A

B

C

D

E

F

Pack Qty.

SMC-7005 SMC-7015 SMC-7020 SMC-7025 SMC-7030 SMC-7035 SMC-7040

5-40 10-32 1 ⁄4-28 5 ⁄16-24 7 ⁄16-20 1 ⁄2-20 3 ⁄4-16

.47 .63 .94 .94 1.22 1.61 1.97

.82 1.16 1.38 1.38 1.83 2.11 2.91

.22 .23 .25 .25 .31 .31 .50

.38 .63 .50 .50 .75 .75 1.13

.27 .50 .50 .50 .75 .75 1.13

1 1 1 1 1 1 1

949

AIR CYLINDERS & ACCESSORIES Air Cylinders Compact & Composite

Cylinders are double acting, with a single rod end. Cylinder barrel is made from a unique cross-wound thermo set epoxy. This creates a very strong and lightweight cylinder. The high impact resistance reduces the chances of cylinder failure due to dings or dents. Interior surface is self-lubricating, which insures highly reliable performance and an extended seal life. Cylinder heads are clear anodized aluminum alloy with stainless steel tie bolts.

Maximum pressure is 200 psi. Cylinder temperature rating is -25 to +225 degree Fahrenheit.

Item No.

ARO

ARO-610 ARO-615 ARO-625 ARO-635 ARO-650 ARO-665 ARO-675 ARO-705 ARO-710 ARO-715

CCD07-SBP-010-R CCD07-SBP-020-R CCD07-SBP-040-R CCD11-SBP-010-R CCD11-SBP-040-R CCD15-SBP-020-R CCD15-SBP-040-R CCD25-SBP-010-R CCD25-SBP-020-R CCD25-SBP-030-R

Bore Dia.

Stroke

A

B

C

D

E

F

G

J

L

Pack Qty.

1 2 4 1 4 2 4 1 2 3

.13 .13 .13 .13 .13 .13 .13 .13 .13 .13

1.50 1.50 1.50 2.00 2.00 2.62 2.62 3.75 3.75 3.75

.34 .34 .34 .50 .50 .50 .50 .66 .66 .66

.56 .56 .56 .88 .88 .88 .88 1.19 1.19 1.19

.14 .14 .14 .25 .25 .25 .25 .33 .33 .33

1.22 1.22 1.22 1.69 1.69 2.19 2.19 3.25 3.25 3.25

10-32 UNF 10-32 UNF 10-32 UNF 1 ⁄8 UNF 1 ⁄8 UNF 1 ⁄8 UNF 1 ⁄8 UNF 1 ⁄4 UNF 1 ⁄4 UNF 1 ⁄4 UNF

10-32 UNF 10-32 UNF 10-32 UNF 5 ⁄16-24 UNF 5 ⁄16-24 UNF 3 ⁄8-24 UNF 3 ⁄8-24 UNF 1 ⁄2-20 UNF 1 ⁄2-20 UNF 1 ⁄2-20 UNF

.31 .31 .31 .50 .50 .63 .63 .75 .75 .75

1 1 1 1 1 1 1 1 1 1

3

⁄4 3 ⁄4 3 ⁄4 11⁄16 11⁄16 11⁄2 11⁄2 21⁄2 21⁄2 21⁄2

Air Cylinders Low Profile

Parker low profile cylinders are designed to meet the demands for saving space. The cylinder body is made of heavy wall aluminum alloy. The tube ID coating has extreme hardness, excellent wear, seizure resistance, low coefficient of friction and high corrosion resistance. The piston rod is made of high strength steel, hard chrome plated for smooth performance, and extended seal wear. The piston seal and the piston rod seal are made of Buna-N material for positive sealing. Maximum operating pressure 250 psi with an operating temperature range of -10 to 165 degree Fahrenheit.

Item No.

MFP-230 MFP-231 MFP-232 MFP-233 MFP-234 MFP-235 MFP-236 MFP-237 MFP-238 MFP-239 MFP-240 MFP-241 MFP-242 MFP-243 MFP-244 MFP-245 MFP-246 MFP-247 MFP-248 MFP-249

Parker

.75NLP9-1.00 .75NLPB9-2.0 .75NLPB9-3.00 .75NLPB9X4 1.50NLPB9-1.00 1.50NLP9-2.00 1.50NLPB9X3 1.50NLPB9X4 2.00NLPB9-1.00 2.00NLPB9X2 2.00NLPB9X3 2.00NLPB9X4 3.00NLP9-1.00 3.00NLPB9-2.00 3.00NLPB9X3 3.00NLPB9X4 4.00NLPB9X1 4.00NLPB9-2.00 4.00NLPB9X3 4.00NLPB9X4

Bore Dia. 3

⁄4 ⁄4 ⁄4 3 ⁄4 11⁄2 11⁄2 11⁄2 11⁄2 2 2 2 2 3 3 3 3 4 4 4 4 3 3

Stroke

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

A 1

⁄8 ⁄8 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 1

B 1

1 ⁄2 11⁄2 11⁄2 11⁄2 25⁄8 25⁄8 25⁄8 25⁄8 31⁄8 31⁄8 31⁄8 31⁄8 41⁄4 41⁄4 41⁄4 41⁄4 51⁄2 51⁄2 51⁄2 51⁄2

C 23

⁄64 ⁄64 ⁄64 23 ⁄64 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 43 ⁄64 43 ⁄64 43 ⁄64 43 ⁄64 27 ⁄32 27 ⁄32 27 ⁄32 27 ⁄32 23 23

D

E

3

17

3

17

3

17

⁄8 ⁄8 ⁄8 3 ⁄8 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 9 ⁄16 9 ⁄16 9 ⁄16 9 ⁄16 21 ⁄32 21 ⁄32 21 ⁄32 21 ⁄32 49 ⁄64 49 ⁄64 49 ⁄64 49 ⁄64

⁄64 ⁄64 ⁄64 17 ⁄64 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 7 ⁄16 7 ⁄16 7 ⁄16 7 ⁄16 17 ⁄32 17 ⁄32 17 ⁄32 17 ⁄32

F

1.219 1.219 1.219 1.219 2.187 2.187 2.187 2.187 2.687 2.687 2.687 2.687 3.781 3.781 3.781 3.781 4.937 4.937 4.937 4.937

G

10-32 10-32 10-32 10-32 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄8-27 1 ⁄4-18 1 ⁄4-18 1 ⁄4-18 1 ⁄4-18 3 ⁄8-18 3 ⁄8-18 3 ⁄8-18 3 ⁄8-18

H

#6 #6 #6 #6 #10 #10 #10 #10 #10 #10 #10 #10 1 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 5 ⁄16 5 ⁄16 5 ⁄16 5 ⁄16

J

10-32 10-32 10-32 10-32 3 ⁄8-24 3 ⁄8-24 3 ⁄8-24 3 ⁄8-24 1 ⁄2-20 1 ⁄2-20 1 ⁄2-20 1 ⁄2-20 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 5 ⁄8-18 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16

K

L

21

5

21

5

21

5

⁄32 ⁄32 ⁄32 21 ⁄32 1 1 1 1 11⁄16 11⁄16 11⁄16 11⁄16 19⁄32 19⁄32 19⁄32 19⁄32 15⁄8 15⁄8 15⁄8 15⁄8

⁄16 ⁄16 ⁄16 5 ⁄16 5 ⁄8 5 ⁄8 5 ⁄8 5 ⁄8 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 7 ⁄8 7 ⁄8 7 ⁄8 7 ⁄8 1 1 1 1

Pack Qty.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Note: Threaded hole size for mounting counterbore SHCS. Four places equally spaced for bore diameter 11⁄2” through 4”. Two places on 3⁄4” in bore 180° apart.

Air Accessories Extra Low Profile Reed Sensor

s Three meter cord s Output function is normally open, with output voltage of 10-120 vac s Continuous current is 100 mA s Response sensitivity 3 MT, with switching frequency 400 Hz s Voltage drop is 3V s Ambient temperature range of -13 to 167 degree Fahrenheit s Standard sensor mount flush to cylinder body

Item No.

Parker

Description

MFP-286 P8S-GRFLX Reed Sensor w/Flying Leads

950

Pack Qty.

1

SPEED CONTROLLERS Speed Controller One Touch Fittings Inline Type

Position Indicating Sensors

®

Minimizes installation time and cost. The one touch fittings accept nylon and polyurethane tubing. The speed may be accurately controlled, even on low speed.

Constant speed is easily set. Body and handle made from PBT. Item No.

Tube Size OD

SMC

Body Size

Cylinder Bore Size (mm)

Pack Qty.

M5 1 ⁄8 1 ⁄4 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄2

6, 10, 15, 20 20, 25, 32 20, 25, 32, 40 40, 50, 63 40, 50, 63 63, 80, 100 63, 80, 100

1 1 1 1 1 1 1

1

SMC-2005 AS1002F-01 SMC-2010 AS2002F-07 SMC-2015 AS2051F-07 SMC-2020 AS3001F SMC-2025 AS3002F-11 SMC-2030 AS4002F-11 SMC-2035 NAS4001F-13

⁄8 ⁄4 ⁄4 ⁄4 3 ⁄8 3 ⁄8 1 ⁄2 1 1 1

Speed Controller Fittings Threaded Elbow Type

Works on tie rod cylinders with magnetic rings. These sensors include a universal tie rod clamp for most tie rod cylinders.

Features two LED indicators at its corners for widest possible viewing angle. Solid state models also include a power and output LED indicator for positioning and troubleshooting circuits. All sensors come with an 118" pvc cable. 1 amp maximum switching current. Temperature range 14 to 158 degrees Fahrenheit. IP67 (NEMA 6) enclosure classification. 5 Gauss parallel magnetic requirement.

®

Speed may be accurately controlled, even at low speeds. Body swivels 360 degrees. Body made from die cast aluminum. Retainer prevents accidental loss of needle.

Item No.

SMC

Thread NPT

SMC-2050 NAS2200-N01 SMC-2055 AS2200-N02 SMC-2060 NAS3200-N03 SMC-2065 NAS4200-N04

Body Size

1

1

1

1

⁄8 ⁄4 3 ⁄8 1 ⁄2

⁄8 ⁄4 3 ⁄8 1 ⁄2

Item No.

Cylinder Pack Bore Size (mm) Qty.

20, 25, 30, 40 20, 25, 30, 40 30, 40, 50, 63 80, 100

Switch Type

Output

Operating Voltage

Pack Qty.

— NPN PNP

5-240 V AC/DC 5-30 V DC 5-30 V DC

1 1 1

AZ-1* 2-Wire Reed Switch AZ-2 3-Wire Solid State (MR) Sensor AZ-3 3-Wire Solid State (MR) Sensor

1 1 1 1

*30 watt contact rating. Do not exceed rating or damage to sensor may occur.

Interchangeable Tie Rod Cylinders With or Without Magnetic Rings

®

P + Sroke H ( NPT)

F B

These medium duty, double acting, tie rod cylinders are NFPA interchangeable. They are available with or without position indicating magnet. Standard wear ring extends seal life. Basic mount. Pre-lubricated. 250 psi max. operating pressure.

E A

G

D

I

C

K

J

L + Sroke

w/o Magnetic w/ Magnetic Item No.

SMC-8005 — — SMC-8025 SMC-8030 SMC-8035 SMC-8040 SMC-8045 SMC-8060 — SMC-8085 SMC-8090 SMC-8100

Item No.

Bore Size

— SMC-8110 SMC-8115 SMC-8125 SMC-8130 SMC-8135 SMC-8140 — — SMC-8180 — — —

1

Stroke

1 ⁄2 11⁄2 11⁄2 2 2 2 2 21⁄2 21⁄2 31⁄4 4 4 4

A

2 4 6 2 4 6 8 2 8 8 2 4 8

B

5

7

5

7

5

7

⁄8 ⁄8 ⁄8 5 ⁄8 5 ⁄8 5 ⁄8 5 ⁄8 5 ⁄8 5 ⁄8 1 1 1 1

⁄16-20 ⁄16-20 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 7 ⁄16-20 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16 3 ⁄4-16

C 3

⁄4 ⁄4 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 3 ⁄4 11⁄8 11⁄8 11⁄8 11⁄8 3 3

D

E

2.02 2.02 2.02 2.60 2.60 2.60 2.60 3.10 3.10 3.90 4.70 4.70 4.70

1

1 ⁄8 11⁄8 11⁄8 11⁄8 11⁄8 11⁄8 11⁄8 11⁄8 11⁄8 11⁄2 11⁄2 11⁄2 11⁄2

F 1

⁄4-28 ⁄4-28 ⁄4-28 5 ⁄16-24 5 ⁄16-24 5 ⁄16-24 5 ⁄16-24 5 ⁄16-24 5 ⁄16-24 3 ⁄8-24 3 ⁄8-24 3 ⁄8-24 3 ⁄8-24 1 1

G

2 2 2 21⁄2 21⁄2 21⁄2 21⁄2 3 3 33⁄4 41⁄2 41⁄2 41⁄2

H 3

⁄8 ⁄8 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄2 1 ⁄2 1 ⁄2 3 3

I

J

1.26 1.26 1.26 1.26 1.26 1.26 1.26 1.30 1.30 1.57 1.57 1.57 1.57

1.10 1.10 1.10 1.06 1.06 1.06 1.06 1.06 1.06 1.18 1.18 1.18 1.18

K

L

P

Pack Qty.

1.43 1.43 1.43 1.84 1.84 1.84 1.84 2.19 2.19 2.76 3.32 3.32 3.32

3

2.36 2.36 2.36 2.40 2.40 2.40 2.40 2.48 2.48 2.72 2.72 2.72 2.72

1 1 1 1 1 1 1 1 1 1 1 1 1

4 ⁄4 43⁄4 43⁄4 43⁄4 43⁄4 43⁄4 43⁄4 47⁄8 47⁄8 553⁄64 553⁄64 553⁄64 553⁄64

Cylinder Mounting Brackets - with Bolts Flange Type Clevis Type Item No.

Item No.

— SMC-8240 SMC-8220 SMC-8245 — SMC-8260

Bore Size

Pack Qty.

11⁄2 2 4

1 1 1

Flange Type

Clevis Type

Solenoid Valves Five Port Pilot Type Metal Seal Plug-in Type

®

Specifications Fluid — Air and Inert Gas Max. Pressure — 150 psi Min. Pressure — 2 Position 15 psi Min. Pressure — 3 Position 22 psi Temp Range — 14°F to 140°F Lubrication — Not Required

All valves include indicator light and surge voltage suppressor.

Electrical entry is plug-in-conduit terminal (base access).

24 V DC Item No.

110 V DC SMC

Item No.

SMC

Type

SMC-2105 VQ4100-5-02T SMC-2155 VQ4100-3-02T 2 Position Single SMC-2110 VQ4100-5-03T — — 2 Position Single 3 Position Closed SMC-2125 VQ4300-5-02T — — Center

CV Factor

Max. Operation Cycles (CPM)

Response Time (MS)

Pack Qty.

1

.83 2.00

1,200 1,200

15 or less 20 or less

1 1

1

.67

600

20 or less

1

Port NPTF

⁄4 3 ⁄8 ⁄4

951

AIR PRODUCTS Air Products Exhaust Port Mufflers

Solenoid Valves

s Inlet pressure is 250 psi s Operating temperature is 0 to 300 degrees Fahrenheit s 40 micron sintered bronze element Item No.

Parker

MFP-200 MFP-201 MFP-202 MFP-203

EM12 EM25 EM37 EM50

Port Size

Overall Length

Hex

Pack Qty.

1.13 1.38 1.50 1.88

.44 .56 .69 .88

1 1 1 1

1

⁄8 1 ⁄4 3 ⁄8 1 ⁄2

These 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0 to 180 degree Fahrenheit.

Maximum operating pressure is 120 psi. Stacking end plate kits must be ordered separately.

Air Products Blocking Valves w/Threaded Connection

Item No.

Port Size (NPT)

Actuator/ Return

Coil

4-Way Stacking without Speed Control 1 ARO-455 ⁄8 Solenoid / Spring 120 VAC 1 ARO-465 ⁄8 Solenoid / Spring 12 VDC 4-Way Stacking with Speed Control 1 ARO-470 ⁄8 Solenoid / Spring 120 VAC 1 ARO-480 ⁄8 Solenoid / Spring 12 VDC

Length

Width

Height

Pack Qty.

2.4 2.4

.8 .8

1.7 1.7

1 1

2.4 2.4

.8 .8

1.7 1.7

1 1

Stacking End Plate Kit

Blocking valves are designed for precise repeatable stopping of moving cylinders or to maintain the position of a cylinder in the event of an air pilot signal loss. Blockers are used for positioning, jogging, and safety purposes. Operating pressure is 0-150 psi with a temperature range of 5 to 140 degrees Fahrenheit.

Maximum operating frequency is 10 Hz with a life expectancy of 10 million cycles at 90 psi, 68 degrees Fahrenheit, dry air and 1 Hz operating frequency.

Item No.

Parker

MFP-487* PWBA3888 MFP-488 PWBA3899P MFP-489 PWBA3833P

Size Port NPT 1

⁄8 ⁄4 ⁄8

1 3

Pilot Port

A

B

5

⁄32 .90 .86 10-32 .90 .86 10-32 1.10 1.14

C 15

D

E

F

Flow Pack Cv Qty.

⁄16 2.41 .80 1.59 .78 ⁄16 2.16 .55 1.59 1.02 ⁄16 2.16 .57 2.04 1.67

15 15

*Pilot Port is an instant tube connection.

1 1 1 Item No.

ARO-490

WE ARE HERE

TO HELP!

Description

Pack Qty.

⁄4" 4-Way Stacking End Plate Kit

1

1

Air Products Needle, Check and Flow Control Valves

Needle

Check

Flow Control

s Operating temperature: 0 to 140 degrees Fahrenheit s Operating pressure: 2,000 psi max.

Item No.

Our Customer Service team is friendly, knowledgeable, and ready to help you find the right product for your application.

952

Parker

Needle MFP-302 PN600B MFP-300 PN200B MFP-301 PN400B MFP-303 PN800B Check MFP-304 C200B MFP-305 C400B MFP-306 C600B MFP-307 C800B Flow Control MFP-308 SPF200B MFP-309 SPF400B MFP-310 SPF600B MFP-311 SPF800B

Port Size NPT 3

⁄8 ⁄8 ⁄4 1 ⁄2 1 1

1

⁄8 ⁄4 ⁄8 1 ⁄2 1 3

1

⁄8 ⁄4 ⁄8 1 ⁄2 1 3

Flow SCFM

Pack Qty.

33.1 8.8 19.3 55.2

1 1 1 1

29.2 86.1 125.3 282.0

1 1 1 1

8.8 19.3 33.1 55.2

1 1 1 1

AIR PRODUCTS Air Products Rod Clevises

Item No.

Air Product Pre-Assembled Two-Hand Control Enclosure

Parker

MFP-176 1458030044 MFP-177 1458030075

A

B

C

3

3

1

⁄4 11⁄8

⁄4 11⁄4

⁄2 3 ⁄4

D

11⁄2 21⁄8

E

F

1

1

⁄2 5 ⁄8

⁄2 3 ⁄4

G

Load Capacity

7

⁄16-20 4,250 3 ⁄4-16 11,200

Pack Qty.

1 1

Air Product Silencer

Two-hand control with two mushroom head buttons and 5⁄32" connections.

Item No.

Parker

Description

Pack Qty.

MFP-486

PXPC111

Two-Hand Control Enclosure

1

Quick Exhaust and Shuttle Valves With Urethane Diaphragm

Item No.

Parker

MFP-213 OR25B MFP-214 OR37B MFP-215 OR50B

Designed to give excellent noise reduction with a minimum effect on air efficiency. Silencer fits into tight places without extra plumbing or fittings due to its trim design. Fits directly into the exhaust port of most commercial valves. Open surface of element allows for rapid discharge of air without undesirable back pressure. Body is acetal, and element is polyethylene. Pressure rating is 0 to 150 psi. SCFM rate is 124 with a 100 psi inlet. Temperature rating is 14 to 140 degree Fahrenheit. Thread size is 1⁄4".

Item No.

A

B

Pack Qty.

MFP-1000

2.56

.83

1

Lightweight plastic mufflers resist clogging. Fail-safe feature guards against excessive back pressure build up. Made of glass filled polypropylene with a multi-layered brass wire mesh muffler that is impervious to solvents. These mufflers resist cross threading and the corrosion that is caused by metal-to-metal contact.

The housing has a screw-off top so you can clean the inner wire mesh muffler. Mufflers reduce exhaust noise by more than 20 Db to bring within OSHA standards. They have a NPT male connection. Maximum pressure is 150 psi and maximum temperature is 175 degree Fahrenheit.

Type A JM-01 JM-02 Type B JM-11 JM-12

1

⁄8 ⁄4

1

1

⁄8 ⁄4

1

Length

Diameter

Pack Qty.

1.76 1.81

1.62 1.62

1 1

2.35 2.48

.95 .95

1 1

Item No.

Type B JM-13 JM-14 JM-16 JM-18

Pipe Size 3

⁄8 ⁄2 ⁄4 1

1 3

1

1

1

3

3

3

1

1

1

⁄4 ⁄8 ⁄2

⁄4 ⁄8 ⁄2

⁄4 ⁄8 ⁄2

Flow SCFM

Pack Qty.

90 240 450

1 1 1

Parker

Port Size 1

⁄4 ⁄8 ⁄2

3 1

Overall Length

Pack Qty.

2.41 3.06 3.19

1 1 1

We have over 1 billion components in stock—available for same day shipping!

Type B

Pipe Size

Exhaust Port NPTF

Air Products Exhaust Port Silencers

MFP-210 ES25MB MFP-211 ES37MC MFP-212 ES50MB

Type A

Item No.

Cyl. Port NPTF

Note: Flow Rate is at 100 psi inlet pressure with full pressure drop.

Item No.

Air Products Pneumatic Exhaust Mufflers

Inlet Port NPTF

Length

Diameter

Pack Qty.

3.55 3.68 5.60 5.85

1.34 1.34 1.90 1.90

1 1 1 1

YOUR ESSENTIAL

SOLUTIONS!

953

AIR PRODUCTS Vacuum Ejectors Built-In Silencer Type

.13"

C

B

®

Mounting Hole

Tube or NPT size

D J

E F

Max. Suction Rate/Air Consumption (SCFM) Nozzle Size 0.5mm 0.7mm 1.0mm Max. Suction Flow .18 .42 .85 Air Consumption .35 .71 1.20

H A

Threaded Connections

Tube or NPT size

1.3mm 1.41 2.41

Available with built-in silencer that has muffled exhaust or body ported type that has an individual exhaust port. Available with one touch fittings for tubing or threaded ports.

Solid resin design of nozzle and body makes these units lightweight and compact. Max. vacuum pressure 26 Hg. Max. operating pressure 100 psi. Should only be used with clean supply side air without oil.

One-Touch Fittings

See pages 306 and 307 for suction cups.

Item No.

SMC

Nozzle Size (mm)

A

B

.5 1.0 1.3

2.44 2.94 3.50

0.75 0.75 .98

1

.7 1.0

2.36 2.64

0.75 0.75

1

Threaded Connections SMC-8510 NZHI05BS-T01-T01 SMC-8530 NZHI10BS-T01-T01 SMC-8535 NZHI13BS-T01-T02 One-Touch Fittings SMC-8515 NZHI07BS-07-07 SMC-8525 NZHI10BS-07-07

C

⁄8 ⁄8 ⁄4

1 1

⁄4 ⁄4

1

Air Products Limit Switches

H

1.10 1.26 1.50

1.50 2.00 2.50

2.01 2.52 2.99

1

1.10 1.26

1.75 2.00

2.24 2.52

1

⁄8 ⁄8 ⁄4

1 1

⁄4 ⁄4

1

J

Pack Qty.

1.57 1.69 2.13

1 1 1

1.26 1.38

1 1

Funct. stroke .08 Max. stroke .13

.96 1.10

.59 2 x Dia. .17

Parker

Type of Switch

Actuator

MFP-480 PXCM121 Plastic Roller

.79 1.10

Pack Qty.

Connection 5

⁄32

NNP

1

Air Products Vacuum Generator

Filters contaminant water, dirt and oil out of shop air. Uses a centrifugal spinning action which forces heavy contaminants out.

The air is then circulated back up through a stainless steel media with filtration to 3 micron with greater than 99.9% efficiency. A final cotton polyester friction filter filters to 1 micron. Available with a polycarbonate bowl. Each dryer includes an automatic float drain to expel any liquids that build up inside the bowl. Maximum operating pressure 150 psig. Maximum operating temperature 125 degree Fahrenheit. Made in USA.

Vacuum generators are designed to be compact and lightweight with a minimal air consumption and high vacuum levels. 5 micron filter of unlubricated air and pressure range of 20 to 110 psi with a temperature range of 10 to 160 degrees Fahrenheit. Removable cartridge on MFP-463.

See pages 306 and 307 for suction cups.

Parker

F

.55 Dia.

.69

1.61

Item No.

E

Point of Use Dryers

.26

Item No.

D

Air Consumption

MFP-460 CV-10HSN

30

Inlet 1

⁄4

Vacuum NPT

Exhaust NPT

1

1

⁄4

⁄4

Mounting Holes 1

⁄4-20

Air Products Vacuum Switch

See page 956 for other dryers.

Item No.

Pack Qty.

Flow Rate SCFM @ 100 PSI Bowl Material

F-1 Polycarbonate

Min.

Max.

2.0

20.0

NPT Overall Port Size Height 1

⁄4

Overall Width

Overall Depth

Pack Qty.

3.00

2.60

1

7.5

1 ®

Air Products Suction Filters

®

OUT

A

120"

INDICATOR LIGHT

B

Item No.

SMC

Type

Voltage

Pack Qty.

SMC-8650

ZSM1-T115L

Non-Contact

24 VDC

1

954

IN

.17 2.07" This diaphragm-type switch is compact, lightweight, and 1 /8 NPTF non-contact solid state. Vacuum settings VAC .59" .91" screw allows you to increase or decrease pressure. Indicator light comes on under "on" condition. Maximum pressure 75 psi. 1⁄8" NPTF ports. 120" lead wire length. Pressure range -8 to -26 in Hg.

Protects vacuum ejectors, pumps, switches and valves from particle contamination. The element can be easily changed without tools or removing the tubing. One-touch tubing fittings for easy installation and removal. Made from light weight molded resin material.

Item No.

Flow Max. SCFM

SMC-8605 SMC-8610

1.1 2.1

Replacement Element Tube Size 1

⁄4 3 ⁄8

A

B

Pack Qty.

Item No.

2.05 2.24

2.56 2.76

1 1

SMC-8625 SMC-8630

AIR PRODUCTS Air Products Regulators with Gauge

Air Products Lubricators

These regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications. Rolling diaphragm design gives repeatable performance with low hysteresis over a wide range of pressures.

Pressure range is 2-125 psi and temperature range is 32 to 125 degrees Fahrenheit.

Item No.

Parker

MFP-367 MFP-365 MFP-366 MFP-364*

07R418A 07R318A 07R318A 05R118AD

Pack Qty.

Description

Regulator Regulator Regulator Regulator

3

⁄4" ⁄8" ⁄2" 1 ⁄4" 3 1

NPT NPT NPT NPT

1 1 1 1

These lubricators are designed to provide optimum and uniform lubrication with fine micro-mist particles of two micron or smaller.

Units should be installed close to the application, ensuring effective distribution of oil to pneumatic components. All units have a polycarbonate bowl. Metal bowl guards sold separately. Maximum pressure is 150 psi and temperature range of 32 to 125 degrees Fahrenheit.

*Max psi 125

"Piggyback" Filter/Regulator

Mounting Bracket

Item No.

Integral filter regulator "piggy backs" are an excellent choice where accurate pressure regulation and high moisture removal are required in a space saving package. All "piggy backs" come with a polycarbonate bowl (150 psi max.) and a temperature range of 32 to 125 degrees Fahrenheit. Auto drain is standard on these models with a metal bowl guard. Comes with a 40 micron filter. 30 SCFM. Item No.

Parker

Parker

Pack Qty.

Description 1

MFP-360 15L12N MFP-363 07L42BE

Lubricator ⁄4" NPT Lubricator 3⁄4" NPT

1 1

"Piggyback" Filter/Regulators with Gauge

Pack Qty.

Description 1

MFP-354 05E12A18AB Piggyback Filter / Regulator ⁄4" NPT MFP-355 05E2PA13A Piggyback Filter / Regulator 3⁄8" NPT MFP-371 PS963P Mounting Bracket

1 1 1

Air Products Combination FRL'S

Mounting Bracket Item No.

s Polycarbonate bowls with metal bowl guards s Operating temperature range: 32 to 125 degrees Fahrenheit s Pressure rating: 150 psi max. s All items below include a filter with a manual drain, relieving regulator (2-125 psi) and micro mist lubricator s Mounting brackets sold separately Description

Pack Qty.

3 Unit Combination 1⁄4" NPT 3 Unit Combination 1⁄4" NPT w/ Lockout 3 Unit Combination 3⁄8" NPT 3 Unit Combination 3⁄8" NPT w/ Lockout Mounting Bracket

1 1 1 1 1

Parker

MFP-350 15B12A13A2NE MFP-351 15B12A13A2NEK MFP-352 15B22A13A2N MFP-353 15B22A13A2N MFP-370 PS955P

Integral filter/regulator "piggybacks" are an excellent choice where accurate pressure regulation and high moisture removal efficiency are required in a space saving package. Pressure rating 150 psi and a temperature range of 32 to 125 degrees Fahrenheit.

Polycarbonate bowl and manual drain are standard on units. 67 SCFM flow rate. Comes with a 40 micron filter.

Item No.

Description

Pack Qty.

Piggyback Filter / Regulator 1⁄2" NPT Piggyback Filter / Regulator 3⁄4" NPT

1 1

Parker

MFP-368 07E31A18A MFP-369 07E42A18A

Right Angle Flow Controls with Presto Lock Fittings

s Temperature range: 0 to 140 degrees Fahrenheit s Pressure range: 125 psi max.

Air Products Filters These filters provide excellent water removal efficiency. Unique deflector plate and shroud creates a swirling of the air stream, ensuring maximum water and dirt separation. Operating pressure is 150 psi and a temperature range of 32 to 125 degrees Fahrenheit. Each unit comes with a 40 micron filter and polycarbonate bowl. Metal bowl guards sold separately.

Item No.

Parker

MFP-356 MFP-357 MFP-358 MFP-359

05F12A 07F21A 07F31A 07F42AC

Description

Filter Filter Filter Filter

1

⁄4" 3 ⁄8" 1 ⁄2" 3 ⁄4"

NPT NPT NPT NPT

Item No.

Thread NPT

Parker

MFP-328 03251-3838

Tube Size 3

3

⁄8

⁄8

Cv Adj. Flow

Cv Free Flow

Pack Qty.

.78

.65

1

Air Products 40 Micron Filter Elements

Pack Qty.

1 1 1 1

Item No.

Parker

MFP-512 PS901P MFP-513 PS801P

Use With

Pack Qty.

MFP-354, 355, 356 MFP-357, 358, 359, 368, 369

1 1

See pages 956-957 for other filters, lubricators and regulators

955

VALVES, FILTERS, REGULATORS & DRYERS Rotary Hand Valves

®

Out 2

2-M Out 2 CD

In

D

H

N

Exh.

In

H

4-M

Out 1 C A

Out 1 E C A

K

VH2

K

K Out 1

VH3

An ideal manual directional control valve for use with all pneumatic systems. Precision lapped rotor and seals offers high tolerance to dirt contamination. Offered as four-way, these valves may be used as two or three-way by plugging unused ports. (Note: "In" port must be used as pressure inlet port to assure efficient operation.) Max supply pressure 220 psig. Operating pressure 150 psig. Body is made from aluminum die cast. Can be used with any non-flammable, non-toxic, non-corrosive gases, except oxygen.

Item No.

SMC-1005 SMC-1010 SMC-1015 SMC-1020 SMC-1025 SMC-1030 SMC-1035 SMC-1040 SMC-1045

SMC

VH200-N02 VH201-N02 VH202-N02 VH300-N02 VH301-N02 VH302-N02 VH300-N03 VH301-N03 VH302-N03

Actuation

NPT

3 Position - Center Blocked 3 Position - Cylinder to Exhaust 2 Position - Detented 3 Position - Center Blocked 3 Position - Cylinder to Exhaust 2 Position - Detented 3 Position - Center Blocked 3 Position - Cylinder to Exhaust 2 Position - Detented

1

⁄4 ⁄4 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 1 1

A

C

D

E

H

K

2.44 2.44 2.44 2.91 2.91 2.91 2.91 2.91 2.91

1.93 1.93 1.93 2.60 2.60 2.60 2.60 2.60 2.60

1.93 1.93 1.93 .71 .71 .71 .71 .71 .71

— — — 2.44 2.44 2.44 2.44 2.44 2.44

3.88 3.88 3.88 4.49 4.49 4.49 4.49 4.49 4.49

.45 .45 .45 .51 .51 .51 .51 .51 .51

Modular Filters Complete FRL's

®

Sold as a complete unit. The space saving modular design allows for easy assembly and disassembly for maintenance. No fittings, nipples etc. needed for assembly. Regulating range of 7 to 125 psi. Polycarbonate bowl with sight guard.

Pressure gauge included.

Item No.

Overall Height

3

SMC-6015 AC30A-N03G-3Z SMC-6010 AC20A-N02G-CZ SMC-6020 AC40A-N04G-Z

⁄8 NPT ⁄4 NPT ⁄2 NPT

8.31 6.48 10.33

1 1

®

Out

D

OSHA Rule 29 CFR1910.147 requires energy sources for certain equipment be turned off or disconnected and that device either be locked or labeled with a warning tag. When in the exhaust position, the valve may be padlocked secure.

SMC-1065 SMC-1070 SMC-1080 SMC-1085

VHS30-N02-Z VHS30-N03-Z VHS40-N03-Z VHS40-N04-Z

956

1

1

3

1

3

3

⁄4 ⁄8 ⁄8 1 ⁄2

⁄4 ⁄4 ⁄8 3 ⁄8

Port Size

Overall Height

Pack Qty.

⁄4 NPT ⁄8 NPT ⁄2 NPT

6.48 8.31 10.33

1 1 1

SMC 1 3

1

®

Allows "point of use" installation wherever moisture needs to be removed from the air supply. 99% of all moisture can be removed. Moisture can be removed at the air inlet or the end of an air line.

They have a built in automatic drain for continuous non-stop operation. Special resin element for long life. These dryers are lightweight, compact and easy to install. Brackets sold separately. Best if used after air filter, however, this is not required. Do not use after air line lubricator.

B

A

Exh. Port

1 1 1 1 1 1 1 1 1

G

In

NPT Port

.98 .98 .98 — — — — — —

Ambient Dryers

C

SMC

6 6 6 6 6 6 6 6 6

®

SMC-6025 AW20-N02BG-CZ SMC-6030 AW30-N03BG-Z SMC-6035 AW40-N04BG-Z

1 1 1

F

Item No.

x x x x x x x x x

Pack Qty.

Filter Regulators Non-Lube Systems

Item No.

Pack Qty.

Lock Out Valves Three Port

E

M4 M4 M4 M5 M5 M5 M5 M5 M5

N

Combines a filter and regulator into one unit for easy assembly and space savings. Comes with polycarbonate bowl with metal sight guard, pressure gauge and mounting bracket.

Port Size

SMC

M

A

B

C

D

E

F

G

Pack Qty.

2.09 2.09 2.76 2.76

3.07 3.07 3.35 3.35

1.14 1.14 1.26 1.26

1.89 1.89 1.42 1.42

1.18 1.18 1.42 1.42

1.77 1.77 1.93 1.93

2.09 2.09 2.52 2.52

1 1 1 1

Item No.

SMC

SMC-6050 AMG150-N02C SMC-6055 AMG250C-N03C SMC-6060 AMG350C-N04C SMC-6065 AM-BM101 SMC-6080 AMG-EL150 SMC-6085 AMG-EL250 SMC-6090 AMG-EL350

Port Size 1

⁄4 ⁄8 ⁄2

Flow Rate SCFM

Height

Width

1

1

10.5 5 ⁄2 2 ⁄2 26 6 3 53 71⁄4 31⁄2 Bracket for SMC-6050 Replacement Element for SMC-6050 Replacement Element for SMC-6055 Replacement Element for SMC-6060 3 1

Pack Qty.

1 1 1 1 1 1 1

FILTERS, LUBRICATORS & REGULATORS Filters, Lubricators and Regulators Economy Series

Heavy Duty Lubricators

s s s s s s

Allows filling without shutting down Proportional oil flow at all pressures Supplied with bowl guard Polycarbonate bowl Maximum supply pressure 150 psi Maximum operating temperature 120 degrees Fahrenheit Item No.

Compact and durable. Bodies are made of die cast aluminum and the filter and lubricator have a transparent polycarbonate bowl with a plastic guard. Filter is 40 micron. Lubricator allows lubricant to be added without shutting off air line. Once delivery rate is set, the lubricant is proportionately delivered at all air flows. Regulator has two full flow gauge ports. Maximum pressure of 150 psi and maximum temperature is 120 degree Fahrenheit.

Item No.

COL-26F2 COL-26F3 COL-26L2 COL-26L3 COL-26R2 COL-26R3

Description

Filter Filter Lubricator Lubricator Regulator Regulator

Pipe Size 1

⁄4 ⁄8 ⁄4 3 ⁄8 1 ⁄4 3 ⁄8 3 1

Height

Width

Pack Qty.

6 6 61⁄2 61⁄2 4 4

2 2 2 2 2 2

1 1 1 1 1 1

Heavy Duty Filters

Pipe Size

Fluid Capacity

Height

Width

Pack Qty.

4 oz 4 oz 9 oz

67⁄8 67⁄8 77⁄8

215⁄16 215⁄16 311⁄16

1 1 1

1

COL-8842R COL-8843R COL-8844R

⁄4 3 ⁄8 1 ⁄2

Heavy Duty Regulators

s Diaphragm prevents ruptures from surges s Pressure bleed valve s 1⁄4" gauge ports Item No.

Pipe Size 1

COL-8802 COL-8803 COL-8804

⁄4 3 ⁄8 1 ⁄2

Working Range

Body Style

Height

Width

Pack Qty.

5-125 5-125 5-125

T-Handle T-Handle T-Handle

55⁄16 55⁄16 63⁄8

213⁄16 213⁄16 35⁄8

1 1 1

In Line Filters, Lubricators and Regulators s s s s s s

40 micron filter Quick disassembly by hand Supplied with bowl guard Polycarbonate bowl Maximum supply pressure 150 psi Maximum operating temperature 120 degree Fahrenheit

See page 955 for other filters, lubricators, and regulators.

Item No.

COL-8822R COL-8824R

Pipe Size 1

⁄4 ⁄2

1

Height

Width

Pack Qty.

6 67⁄8

215⁄16 311⁄16

1 1

Filter Lubricator Regulator Item No.

Description

COL-4022 COL-40014* COL-4002 COL-4003

Filter Lubricator Regulator Regulator

Inlet 1

⁄4 1 ⁄4 1 ⁄4 3 ⁄8

FPT FPT FPT FPT

Outlet 1

⁄4 1 ⁄4 1 ⁄4 3 ⁄8

MPT MPT MPT MPT

Lgth.

Pack Qty.

13⁄4 3 13⁄4 13⁄4

1 1 1 1

*5cc capacity

ACCESS

HARDWARE Pages 120 - 185

957

GREASE FITTINGS, OILERS, BRUSHES & APPLICATORS Hydraulic Grease Fittings

Gravity Feed Oilers KG Model A

"KG" gravity feed oilers are designed for heavyduty, high temperature B lubricating applications.

The rate of oil feed is adjustable and a lock ring maintains the setting.

17/16 Ideal for bearing or gear lubrication. Three position toggle switch provides easy to use on-off control, and a flushing option to avoid dry start-ups. Heavy wall heat resistant glass reservoir and oil sight operate continuously up to 250 degrees Fahrenheit. Vented sight chamber ensures proper operation when used with tight or high speed bearings. Copper brazing of all steel connections provides long life and leak proof design. Made of heavy gauge nickel plated steel. Gaskets are Buna-N.

D Hex C F

B D Hex

C

D Hex B

C

B

A

A

Type 1 Straight

D Dia. B

A

Type 2 With Shank

C

A

Type 3 Angle

Type 4 Push Fit

Available standard, NPT, or metric threaded or barbed press fit.

Press fit are used in unthreaded holes using a drive tool. All have a ball check except where indicated.

Item No.

A Thread Size

Steel 1 HGF-1 ⁄8 NPT 1 HGF-9 ⁄8 NPT 1 HGF-3 ⁄8 NPT 1 HGF-4 ⁄8 NPT 1 HGF-5 ⁄8 NPT 1 HGF-22 ⁄8 NPT 1 HGF-6 ⁄8 NPT 1 HGF-25 ⁄8 NPT 1 HGF-15 ⁄8 NPT 1 HGF-11 ⁄4 NPT 1 HGF-2 ⁄4-28 1 HGF-14 ⁄4-28 1 HGF-16 ⁄4-28 1 HGF-17 ⁄4-28 1 HGF-18 ⁄4-28 1 HGF-19 ⁄4-28 1 HGF-13 ⁄4-28 1 HGF-21 ⁄4-28 1 HGF-23 ⁄4-28 5 HGF-7 ⁄16-24 3 HGF-8 ⁄8-24 HGF-26* 1⁄8 Press-Fit HGF-27 3⁄16 Press-Fit HGF-28* 3⁄16 Press-Fit HGF-29 3⁄16 Press-Fit HGF-30 1⁄4 Press-Fit HGF-32 1⁄4 Press-Fit HGF-33 5⁄16 Press-Fit HGF-34* 3⁄8 Press-Fit Stainless 1 HGF-38 ⁄8 NPT 1 HGF-39 ⁄8 NPT 1 HGF-40 ⁄8 NPT 1 HGF-42 ⁄4-28

Type

1 1 2 2 2 3 3 3 3 1 1 1 2 2 3 3 3 3 1 1 1 4 4 4 3 4 3 4 4 1 3 3 1

B

C 19

13

⁄64 ⁄4 ⁄32 117⁄64 23⁄16 9 ⁄32 17 ⁄64 17 ⁄64 17 ⁄64 23 ⁄64 13 ⁄64 23 ⁄64 5 ⁄8 1 13 ⁄64 19 ⁄64 13 ⁄64 19 ⁄64 5 ⁄32 7 ⁄32 15 ⁄64 5 ⁄32 13 ⁄64 7 ⁄32 7 ⁄32 13 ⁄64 9 ⁄32 7 ⁄32 7 ⁄32

⁄32 5 ⁄8 11⁄4 13⁄4 25⁄8 29 ⁄32 63 ⁄64 7 ⁄8 13 ⁄16 51⁄64 35 ⁄64 11 ⁄16 31 ⁄32 15⁄8 7 ⁄8 31 ⁄32 11 ⁄16 51⁄64 1 ⁄2 35 ⁄64 41 ⁄64 15 ⁄32 1 ⁄2 1 ⁄2 53 ⁄64 1 ⁄2 3 ⁄4 37 ⁄64 37 ⁄64

1

25

1

⁄4 ⁄32 ⁄64 3 ⁄16

17

Degree F

Pack Qty.

⁄16 ⁄16 ⁄16 7 ⁄16 7 ⁄16 7 ⁄16 7 ⁄16 7 ⁄16 7 ⁄16 9 ⁄16 5 ⁄16 5 ⁄16 5 ⁄16 5 ⁄16 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄8 9 ⁄32 3 ⁄8 7 ⁄16 5 ⁄16 5 ⁄16 5 ⁄16 3 ⁄8 5 ⁄16 3 ⁄8 3 ⁄32 7 ⁄16

Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Hex Round Round Round Hex Round Hex Round Round

— — — — — 30 45 65 90 — — — — — 45 45 90 90 — — — — — — 45 — 65 — —

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Hex Hex Hex Round

— 45 90 —

1 1 1 1

7 7

7

5

7

63

7

13

7

⁄8 ⁄64 ⁄16 17 ⁄32

11

Head Type

D

⁄16 ⁄16 ⁄16 5 ⁄16

*No ball check Note: NPT = standard pipe thread.

Metric Grease Fittings

Item No.

Capacity Oz.

TMC-37011 TMC-37012 TMC-37013 TMC-37014

Connection (NPT)

1 1 2.5 2.5

1

⁄8 ⁄4 ⁄8 1 ⁄4

A

B

5

1

1 ⁄8 15⁄8 21⁄8 21⁄8

1 1

Pack Qty.

3 ⁄4 31⁄4 4 4

1 1 1 1

Brush Applicators Brush Type - 1⁄8" NPT Connection

2 5/16

A

Even-Flo 2 5/16 2 5/16 A A

Round

Ever-Last

Even-Flo Contains internal reservoir to allow uniform dispensing of oil for chain lubricants that include graphite or molybdenum.

Ever-Last Ordinary shears may be used to trim brush to fit the exact size of the chain and eliminate uneven wear of the applicator or side dripping of the lubricant. Four part construction using a neoprene cover and felt plate. The mechanical motion of the chain sets up a pumping action in the applicator.

Round Used in applications requiring broad contact surfaces for lubricating and cleaning.

Item No.

Type

Bristle Type

TMC-36051 TMC-36036 TMC-36039 TMC-36045

Even-Flo Ever-Last Round Round

Nylon Neoprene/Felt Nylon Nylon

Chip and Oil Brushes

Plastic Handle

Wood Handle

A

Pack Qty.

2 2 ⁄8 1

1 1 1 1

5

100% high quality bristle. Vulcanized in rubber nickeled ferrule. Very handy around the machine shop, tool room and maintenance departments. Use for cleaning chips and shavings from machinery and parts, applying oils or rust preventatives. Satisfactory for touch-up paint jobs. Available with black plastic handle and black bristle or unfinished wood handle with natural bristles.

Plastic Handle Wood Handle Item No. Item No.

MK-MF-10 MK-MF-15 MK-MF-20 MK-MF-25

958

Thread Angle Size Type Degree

6 6 6 8

x x x x

1 1 1 1

1 3 3 1

— 45 90 —

Pack Qty.

1 1 1 1

Item No.

Thread Size

Type

Angle Degree

MK-MF-35 8 x 1 3 90 MK-MF-40 10 x 1 1 — MK-MF-50 10 x 1 3 90 MK-105-9 105 Pc. Asst. in Plastic Box

Pack Qty.

1 1 1 1

BR-1 BR-2 BR-3 BR-4 BR-5 BR-6 —

Item No.

BR-11 BR-12 BR-13 BR-14 BR-15 BR-16 BR-17

Size 1

⁄2 1 11⁄2 2 21⁄2 3 4

Pack Qty.

1 1 1 1 1 1 1

PRESSURE GAUGES Heavy Duty Liquid Filled

s Designed to perform in rugged and harsh environmental conditions where corrosive and or media is not an issue s Liquid filling protects against pulsation and vibration offering a cushioning and dampening effect s Forged brass one-piece design reduces the chance of leaks and allows field filling as an easy option

Item No.

Pressure Range

Marsh

Pack Qty.

1

Forged brass one-piece design

Pressure Gauges Dry Type

2 ⁄2" Diameter Face - 1/4" NPT Connection MBF-310 W9005PE 30" Hg/0 Vacuum MBF-311 W9046PE 0-60 MBF-312 W9048PE 0-100 MBF-313 W9052PE 0-160 MBF-314 W9054PE 0-200 MBF-315 W9058PE 0-300 MBF-316 W9064PE 0-600 MBF-317 W9072PE 0-1000 MBF-318 W9076PE 0-2000 MBF-319 W9078PE 0-3000 MBF-320 W9082PE 0-5000 MBF-321 W9090PE 0-10000

1 1 1 1 1 1 1 1 1 1 1 1

Air Gun Accessories Three Way Aluminum Manifold

Polycarbonate

Chrome Plated

All gauges are dry type with either polycarbonate or metal cases and polycarbonate or glass lenses. Accuracy is 3-2-3%.

Item No.

Pressure Range

Dial Size

Connection Mounting

COL-8800-60 COL-8800-160 COL-G14160 COL-G14300

0-60 0-160 0-160 0-300

2 2 2 2

Ctr. Back Ctr. Back Ctr. Back Ctr. Back

Size 1

⁄4 1 ⁄4 1 ⁄4 1 ⁄4

Case Type

Pack Qty.

Polycarbonate Polycarbonate Chrome-Plated Chrome-Plated

1 1 1 1

Allows multiple hoses running from one connection point.

Item No.

Size

Pack Qty.

⁄4 x 1⁄4 3 ⁄8 x 1⁄4

1 1

1

COL-3002 COL-3003

Pressure Gauges Standard Series

Pressure Gauges Industrial Series

Lower Mount

Lower Mount

Center Back Mount

s Designed to perform in rugged and harsh environmental conditions especially where pulsation and vibration occur s Accuracy ASME Grade B - +/-3/2/3% (+/-2% of range across middle half of scale) s 304 stainless steel case, liquid filled, copper alloy internals, ventable top fill plug for pressure relief Lower Mount Item No.

Marsh

Center Mount Item No.

Marsh

Pressure Range

Pack Qty.

1

2 ⁄2" Diameter Face - 1/4" NPT Connection MBF-201 J7605P MBF-221 J6405P 30" Hg/0 Vacuum MBF-202 J7614P — — 30 Hg 0-60 MBF-203 J7642P MBF-223 J6442P 0-30 MBF-204 J7646P MBF-224 J6446P 0-60 MBF-205 J7648P MBF-225 J6448P 0-100 MBF-206 J7652P MBF-226 J6452P 0-160 MBF-207 J7658P MBF-227 J6458P 0-300 MBF-208 J7664P MBF-228 J6464P 0-600 MBF-209 J7672P MBF-229 J6472P 0-1000 MBF-210 J7674P MBF-230 J6474P 0-1500 MBF-211 J7678P MBF-231 J6478P 0-3000 MBF-212 J7682P MBF-232 J6482P 0-5000 4" Diameter Face - 1/4" NPT Connection MBF-241 X32965P — — 30" Hg/0 Vacuum — MBF-267 X32552P — 0-300 MBF-249 X32513P — — 0-1000 MBF-250 X32514P — — 0-1500 MBF-251 X32516P — — 0-3000 MBF-252 X32518P MBF-272 X32560P 0-5000

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

s For hydraulics and pneumatic systems, pumps compressors, boilers, regulators, dryers as well as commercial and industrial equipment s Accuracy ASME Grade B - +/-3/2/3% (+/-2% of range across middle half of scale) s Copper alloy tube and socket, steel black painted case, black markings on white dial s Dual scale psi and kPA Lower Mount

Center Mount

Item No.

Item No.

Marsh

Marsh

Pressure Range

11⁄2" Diameter Face - 1/8" NPT Connection MBF-101 J0405 MBF-111 J0605 30" Hg/0 Vacuum MBF-102 J0440 MBF-112 J0640 0-15 MBF-103 J0442 MBF-113 J0642 0-30 MBF-104 J0446 MBF-114 J0646 0-60 MBF-105 J0448 MBF-115 J0648 0-100 MBF-106 J0452 MBF-116 J0652 0-160 MBF-107 J0454 MBF-117 J0654 0-200 2" Diameter Face - 1/8" NPT Connection MBF-121 J1105 MBF-131 J1805 30" Hg/0 Vacuum MBF-122 J1142 MBF-132 J1842 0-30 MBF-123 J1146 MBF-133 J1846 0-60 MBF-124 J1148 MBF-134 J1848 0-100 MBF-125 J1152 MBF-135 J1852 0-160 MBF-126 J1158 MBF-136 J1858 0-300 2" Diameter Face - 1/4" NPT Connection MBF-141 J1405 MBF-151 J2005 30" Hg/0 Vacuum MBF-142 J1442 MBF-152 J2042 0-30 MBF-143 J1446 MBF-153 J2046 0-60 MBF-144 J1448 MBF-154 J2048 0-100 MBF-145 J1452 MBF-155 J2052 0-160 MBF-146 J1458 MBF-156 J2058 0-300 21⁄2" Diameter Face - 1/4" NPT Connection MBF-161 J4605 MBF-171 J5405 30" Hg/0 Vacuum MBF-163 J4642 — — 0-30 MBF-164 J4646 MBF-174 J5446 0-60 MBF-165 J4648 MBF-175 J5448 0-100 MBF-166 J4652 MBF-176 J5452 0-160 MBF-167 J4658 — — 0-300 MBF-168 J4664 — — 0-600 MBF-169 J4672 MBF-179 J5472 0-1000

Center Back Mount

Pack Qty.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

959

INDUSTRIAL HYDRAULICS Industrial Hydraulics Single Acting Cylinders

Type A

Type B

General purpose cylinders. Maximum operating pressure is 10,000 psi. Type A has a non-removable saddle and non-threaded collar.

Coupler included with each cylinder. Type B has a removable saddle.

Item No.

EH-1 EH-2 EH-3 EH-4 EH-5 EH-6 EH-8 EH-26

Cylinder Capacity Enerpac Type (Tons)

RC-50 RC-51 RC-53 RC-55 RC-57 RC-59 RC-102 RC-256

A B B B B B B B

Stroke

Cylinder Effective Area (Sq. In.)

.63 1.00 3.00 5.00 7.00 9.13 2.13 6.25

.99 .99 .99 .99 .99 .99 2.23 5.15

5 5 5 5 5 5 10 25

Oil Collapsed Extended Outside Capacity Height Height Dia. (Cu. In.) A B D

.62 .99 2.97 4.95 6.93 9.04 4.75 32.19

1.63 4.34 6.50 8.50 10.75 12.75 4.78 10.75

2.25 5.34 9.50 13.50 17.75 21.88 6.91 17.00

Cylinder Bore Plunger Dia. Dia. E F

2.31 1.50 1.50 1.50 1.50 1.50 2.25 3.38

1.13 1.13 1.13 1.13 1.13 1.13 1.69 2.56

1.00 1.00 1.00 1.00 1.00 1.00 1.50 2.25

J

Base Mounting Holes Collar Plunger Plunger Bolt Thd. Collar Thread Internal Thread Thread Length Circle Thread Depth Thread Length Pack U V Z W X Qty. O P

K

— 1.00 1.00 1.00 1.00 1.00 1.38 2.00

— — .25 3⁄4-16 .25 3⁄4-16 .25 3⁄4-16 .25 3⁄4-16 .25 3⁄4-16 .25 1-8 .41 11⁄2-16

— .56 .56 .56 .63 .63 .75 1.00

1.12 1.00 1.00 1.00 1.00 1.00 1.56 2.31

.22 ⁄4-20 ⁄4-20 1 ⁄4-20 1 ⁄4-20 1 ⁄4-20 5 ⁄16-18 1 ⁄2-13

— .56 .56 .56 .56 .56 .50 .75

1 1

— 11⁄2-16 11⁄2-16 11⁄2-16 11⁄2-16 11⁄2-16 21⁄4-14 35⁄16-12

— 1.13 1.13 1.13 1.13 1.13 1.13 1.94

1 1 1 1 1 1 1 1

Single Acting Cylinders Flat-Jac® Extremely flat design for use where other cylinders will not fit. Mounting holes permit easy fixturing. Baked enamel finish. Plunger is chrome plated and plunger wiper reduces contamination. Coupler and dust cap included with each cylinder. Maximum operating pressure is 10,000 psi.

Item No.

Enerpac

EH-50 RSM-50 EH-51 RSM-100 EH-53 RSM-300

Cylinder Capacity (Tons)

Stroke

5 10 30

.25 .44 .50

Cylinder Effective Oil Collapsed Extended Area Capacity Height Height (Sq. In.) (Cu. In.) A B

.99 2.24 6.51

.25 .98 3.25

1.28 1.69 2.31

1.53 2.13 2.81

C

D

2.31 3.25 4.63

1.63 2.19 3.75

Cylinder Bore Plunger Dia. Dia. E F

1.13 1.69 2.88

Plunger Protrusion from Base K

1.00 1.50 2.00

Plunger Plunger to to Mtg. Base Hole L M

.04 .04 .08

.81 1.09 1.88

.88 1.34 1.75

Base Mounting Holes Bolt Circle U

Hole Dia. V

1.12 1.44 2.06

.20 .28 .40

Counter Counter Bore Bore Dia. Depth

.312 .422 .625

Pack Qty.

.17 .31 .44

1 1 1

Hydraulic Wedge and Spread Cylinder

For use in very confined work areas. Compact design allows cylinder to be wedged into tight areas and then can be spread to position or hold. Maximum operating pressure 10,000 psi.

Maximum stroke is 111⁄2".

Item No.

Enerpac

Cylinder Capacity (Tons)

Tip Clearance

Cylinder Effect.

Area (Sq. In.)

Oil Capacity (Cu. In.)

A

B

C

E

J

Wedge Width

Pack Qty.

1

.38

1.00

.61

.38

3.70

8.78

1.13

2.01

2.01

1

EH-112 WR-5

W O

Hydraulic Single Acting Hollow Plunger Cylinders

W O

P P F

K

F X

X E

A

3/8"-NPT

A

E T

3/8"-NPT

T

H

H S

S

20 Ton Capacity

12 Ton Capacity

Enerpac

EH-70 RCH-120 EH-71 RCH-121 EH-74 RCH-202

960

Cylinder Capacity (Tons)

12 12 20

Stroke

.31 1.63 2.00

Cylinder Effective Area (Sq. In.)

2.77 2.77 4.72

Oil Capacity (Cu. In.)

.86 4.52 9.44

Collapsed Height A

2.19 4.75 6.31

Extended Outside Height Dia. B D

2.50 6.38 8.31

2.75 2.75 3.88

Cylinder Bore Plunger Dia. Dia. E F

2.13 2.13 2.88

Hollow plunger design allows for both pull and push forces. Cylinders have a singleacting spring return, baked enamel finish for increased corrosion resistance, and collar threads for easy fixturing.

YR D

Y R D

Item No.

B

B

1.38 1.38 2.13

H

.38 .75 .75

Base Mounting Holes Saddle Plunger Plunger Protr. Internal Thread Bolt Thd. from Plgr. Thread Length Circle Thread Depth K O P R S T

— — .27

3

⁄4-16 — 19⁄16-16

.63 — .75

2.00 — 3.25

5

⁄16-18 — ⁄8-16

3

.25 — .62

Collar Center Collar Thread Hole Thread Length Dia. W X Y 3

2 ⁄4-16 23⁄4-16 37⁄8-12

1.19 1.19 1.50

.77 .77 1.06

Pack Qty.

1 1 1

INDUSTRIAL HYDRAULICS Hydraulic Couplers High Flow

A B EC

C

D G FEMALE

F MALE

Item No.

Enerpac

Description

EH-140 C-604 Complete Set EH-141 CR-400 Female Half EH-142 CH-604 Male Half

Max. Flow Capacity (Cu. In./Min)

A

B

2,500 2,500 2,500

2.72 — —

2.14 2.14 —

C NPT 3

⁄8 ⁄8 ⁄8

3 3

D

E

F

G

Pack Qty.

1.39 1.39 —

1.09 — 1.09

.93 — .93

.875 .875 —

1 1 1

Note: Dimension A is total length when male and female are connected.

Hydraulic Light Weight Hand Pumps

These compact pumps have a two speed operation to reduce operator fatigue. The pump base is made of nylon encapsulated aluminum and the reservoir is made of glass filled nylon for resistance to corrosion. The handle is made of non-conductive fiberglass and locks for easy carrying. There is an internal pressure relief valve for overload protection.

See page 955 for other pumps.

Item No.

EH-82 EH-84

Useable Oil Capacity Enerpac (Cu. In.)

P-142 P-392

20 55

Pressure Rating (PSI) 1st Stage

200 200

Oil Displacement Per Stroke (Cu. In.)

2nd Stage

10,000 10,000

1st Stage

.221 .687

2nd Stage

.055 .151

Max. Handle Effort (Lbs.)

78 93

Piston Stroke (In.)

.50 1.00

A

B

7.31 13.25 13.56 21.00

C

1.13 1.44

D

G

H

L

N

P

S

Pack Qty.

⁄4-18 ⁄8-18

12.56 20.56

5.63 7.00

3.75 4.75

3.18 —

.28 —

1 1

E

3.37 3.93

1.13 1.31

1 3

High Pressure Hydraulic Hoses Heavy Duty Rubber

High-Flow Coupler

3

⁄8" NPT

s s s s s

Rubber coated with two layers of braided steel Complies with Material Handling Institute IJ-100 hose specification Crimped on rubber strain relief for durability Flexible with little memory Maximum operating pressure is 10,000 psi Item No.

Enerpac

Type

Oil Capacity (Cu. In.)

EH-122 EH-120 EH-121 EH-123

HC-9203 H-9206 HA-9206 HC-9210

High Flow Coupler 3 ⁄8" NPT Spee-D-Coupler High Flow Coupler

1.77 3.54 3.54 5.89

ID 1

⁄4 1 ⁄4 1 ⁄4 1 ⁄4

Spee-D-Coupler

Length Feet

3 6 6 10

Hose Ends NPT 3

⁄8 3 ⁄8 3 ⁄8 3 ⁄8

Pack Qty.

1 1 1 1

961

COLUMN LEVEL INDICATORS Column Level Indicators Transparent Polyamide Based Technopolymer Slim Design

Transparent polyamide based (PA-T) technopolymer is highly resistant to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naptha and phosphoric esters.

Avoid contact with alcohol or detergents containing alcohol.

Assembled using ultrasonic welding to guarantee a perfect seal.

Maximum continuous working temperature of 190 degrees Fahrenheit (90 degrees Celsius) (with oil). w/o Thermometer

A

B

G

M C

N

D

F

E

w/ Thermometer

Item No.

Item No.

Thermometer Scale (Fahrenheit)

A

B

C

D

E

F

G

M

N

Pack Qty.

EPN-330 EPN-340

EPN-350 EPN-360

32-210 32-210

3.9 5.91

2.99 5

M10 M12

0.91 0.91

0.57 0.57

1.06 1.06

1.57 3.15

0.71 0.91

0.45 0.45

1 1

Column Level Indicators Transparent Polyamide Based Technopolymer Protection Frame HCX-P HCX/T-P Transparent polyamide based (PA-T) technopolymer is highly resistant to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naptha and phosphoric esters.

Avoid contact with alcohol or detergents containing alcohol.

Assembled using ultrasonic welding to guarantee a perfect seal.

Protective frame made of sandblasted zinc-alloy, with a treated finish. Maximum continuous working temperature of 190 degrees Fahrenheit (90 degrees Celsius) (with oil). w/o Thermometer

A B G

H

M C N D

F

E

w/ Thermometer

Item No.

Item No.

Thermometer Scale (Fahrenheit)

A

B

C

D

E

F

G

H

M

N

Pack Qty.

EPN-370

EPN-380

32-210

6.65

5

M12

0.91

0.98

1.54

3.15

4.06

0.91

0.83

1

Column Level Indicators Transparent Polyamide Based Technopolymer MIN Level Electrical Sensor D E

Transparent polyamide based (PA-T) technopolymer is highly resistant to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naptha and phosphoric esters. Avoid contact with alcohol or detergents containing alcohol. Assembled using ultrasonic welding to guarantee a perfect seal. Maximum continuous working temperature of 190 degrees Fahrenheit (90 degrees Celsius) (with oil). The column level indicator, in addition to the visual control, generates an electric signal when the oil level drops to a minimum.

EPN-390: Electrical contact normally open but closes when minimum fluid level is reached.

EPN-400: Electrical contact normally closed, but opens when minimum fluid level is reached.

C

H

Alarm Level

A B K

M N

Center Line P F J

Item No.

A

B

C

D

E

F

H

J

K

M

N

P

Pack Qty.

EPN-390 EPN-400

7.68 7.68

5 5

M12 M12

0.91 0.91

0.71 0.71

1.22 1.22

3.98 3.98

1.06 1.06

1.57 1.57

1.97 1.97

0.98 0.98

1.34 1.34

1 1

Column Level Indicators Transparent Polyamide Based Technopolymer Cut-To-Length

A

Transparent tube with lenticular effect in acrylic material.

Aluminum protection in natural color. Glass-fiber reinforced polyamide based (PA) technopolymer in black. Graduated contrast screen in plastic material that resists grease and oil.

Fitted to the aluminum protection frame with adhesive tape.

Maximum continuous working temperature of 160 degrees Fahrenheit (70 degrees Celsius) (with oil or water). Shorter lengths can be made by cutting the column level indicator to size.

B

H

M

N F

C D E

Item No.

A

B

C

D

E

F

H

M

N

Pack Qty.

EPN-420 EPN-430 EPN-410

16.77 20.71 12.83

15.75 19.69 11.81

M12 M12 M12

0.53 0.53 0.53

1.12 1.12 1.12

1.38 1.38 1.38

13.46 17.44 9.53

1.65 1.65 1.65

0.51 0.51 0.51

1 1 1

962

COLUMN LEVEL INDICATORS & ACCESSORIES Column Level Indicators Transparent Polyamide Based Technopolymer Transparent polyamide based (PA-T) technopolymer is highly resistant to shocks, solvents, oils with additives, aliphatic and aromatic hydrocarbons, petrol, naptha and phosphoric esters.

Avoid contact with alcohol or detergents containing alcohol.

Assembled using ultrasonic welding to guarantee a perfect seal.

Maximum continuous working temperature of 190 degrees Fahrenheit (90 degrees Celsius) (with oil). w/o Thermometer

A

G

B

M

C N D

F

E

w/ Thermometer

Item No.

Item No.

Thermometer Scale (Fahrenheit)

A

B

C

D

E

F

G

M

N

Pack Qty.

EPN-250 EPN-260 EPN-270 EPN-280

EPN-290 EPN-300 EPN-310 EPN-320

32-210 32-210 32-210 32-210

4.21 6.34 6.34 11.46

2.99 5 5 10

M10 M10 M12 M12

0.87 0.91 0.91 0.83

0.63 0.71 0.71 0.71

1.06 1.22 1.22 1.38

1.57 3.15 3.15 7.99

0.71 0.91 0.91 1.02

0.61 0.67 0.67 0.73

1 1 1 1

Plugs Polyamide Based Technopolymer Black Matte Finish

Viewports A B

Glass-fibre reinforced polyamide based (PA) technopolymer is resistant to solvents, oils, greases and other chemical agents. Maximum continuous working temperature is 270 degrees Fahrenheit (130 degrees Celsius).

Item No.

B

EPN-10 EPN-20 EPN-30 EPN-40

1

⁄4 3 ⁄8 1 ⁄2 3 ⁄4

NPT NPT NPT NPT

Brass

Steel

Glass viewports allow the viewing of liquid levels in various applications. Available in either brass or zinc plated steel. Available with or without a baffle. The baffles make it easier to view the oil level and also dampen fluid movement in some applications.

B

C F

D

C

D

F

0.35 0.35 0.43 0.47

0.63 0.63 0.71 0.79

0.75 0.87 1.02 1.26

C 7/16

Tightening Torque (ft-lbs)

3-4 6-7 6-7 7-9

foot foot foot foot

Brass

Steel

Item No.

Item No.

NPT Size

A

Glass Window with Baffle 1 TMC-341 — ⁄2 3 — TMC-306 ⁄4 Glass Window without Baffle 3 TMC-352 TMC-321 ⁄4 TMC-353 — 1

Pack Qty.

1 1 1 1

7 ⁄8 11⁄8

1

⁄2 ⁄4

3

Pack Qty.

13⁄32 11⁄8

1 1

11⁄8 11⁄4

1 1

3

11⁄8 15⁄16

Breather Caps Polyamide Based Technopolymer Cover - Orange Semi-Matte Finish, Marked "Oil" Thread Connector - Black Semi-Matte Finish

C

B

⁄4 1

G A C H

D

A

G

Polyamide based (PA) technopolymer is resistant to solvents, oils, greases and other chemical agents. Foam filter standard on both designs. Maximum continuous working temperature is 210 degrees Fahrenheit (100 degrees Celsius). w/o Splash

C F

B H

w/ Splash

Item No.

Item No.

F

A

EPN-50 EPN-60 EPN-70 EPN-80 EPN-90 EPN-100 EPN-110

EPN-120 EPN-130 EPN-140 EPN-150 EPN-160 EPN-170 EPN-180

0.79 1.18 1.18 1.18 1.18 1.54 1.38

1.22 1.65 1.65 1.65 1.65 2.24 2.76

B 1

⁄4 1 ⁄4 3 ⁄8 1 ⁄2 3 ⁄4 3 ⁄4 3 ⁄4

NPT NPT NPT NPT NPT NPT NPT

C

D

G

H

Pack Qty.

0.39 0.39 0.59 0.67 0.71 0.71 0.59

1.38 1.54 1.73 1.81 1.81 1.87 2.48

0.28 0.28 0.28 0.28 0.28 0.28 0.24

0.28 0.28 0.31 0.47 0.71 0.63 0.63

1 1 1 1 1 1 1

Oil Level Indicators Polyamide Based Technopolymer Black Glossy Finish F

Polyamide based (PA) technopolymer is resistant to solvents, oils, greases and other chemical agents. Window is resistant to alcohol, solvents, oils with additives, greases, acids and alkalis.

Maximum continuous working temperature is 210 degrees Fahrenheit (100 degrees Celsius) at 3 bar pressure.

B

C D

Transparent Window Prismatic Window Item No.

EPN-190 EPN-200 EPN-210

Item No.

EPN-220 EPN-230 EPN-240

B

C

D

E

F

Tightening Torque (ft-lbs)

Pack Qty.

⁄2 NPT ⁄4 NPT 1 NPT

0.39 0.37 0.43

0.72 0.70 0.80

0.57 0.71 0.91

.94 1.26 1.5

4-6 6-7 7-9

1 1 1

A

1.1 1.38 1.37

E A

1 3

963

O-RINGS Buna-N - Viton - Quattro

Buna-N Nitrile are the most commonly used seals. Resists most oils. 70 durometer. Temperature range -65 degrees fahrenheit to 275 degrees fahrenheit.

Viton offers good resistance to oxidation, chemicals, oils, solvents and heat. 75 durometer. Temperature range -10 degrees fahrenheit to 400 degrees fahrenheit.

Quattro Seals are made of Buna-N and are designed to have four sealing surfaces instead of two like O-Rings. 70 durometer.

Reduces the amount of squeeze needed for positive seal, reducing friction and extending seal life.

Buna-N

Viton

Quattro

Item No.

Item No.

Item No.

AS568A Size

ID

OD

003 006 008 010 011 011 012 013 013 014 016 018

1

3

3

5

111 112 113 114 115 116

7

ID OD

Pack Qty.

W

1

⁄16 Width OR-003 — — OR-006 — — OR-008 — — OR-010 — — OR-011 QR-011 — VR-011 — — OR-012 — — OR-013 — — VR-013 — — OR-014 — — OR-016 QR-016 — OR-018 — — 3 ⁄32 Width OR-111 — — OR-112 — — VR-113 — — OR-114 — — OR-115 — — OR-116 — —

⁄ ⁄ ⁄16 1 ⁄4 5 ⁄16 5 ⁄16 3 ⁄8 7 ⁄16 7 ⁄16 1 ⁄2 5 ⁄8 3 ⁄4 16 1 8

⁄ ⁄ ⁄16 5 ⁄8 11 ⁄16 3 ⁄4 16 1 2

9

⁄ ⁄ ⁄16 3 ⁄8 7 ⁄16 7 ⁄16 1 ⁄2 9 ⁄16 9 ⁄16 5 ⁄8 3 ⁄4 7 ⁄8

100 100 100 100 100 25 100 100 25 100 100 100

5

100 100 25 100 100 100

16 1 4

⁄8 ⁄16 ⁄4 13 ⁄16 7 ⁄8 15 ⁄16 11

3

Buna-N

Viton

Quattro

Item No.

Item No.

Item No.

AS568A Size

ID

OD

Pack Qty.

1 1 11⁄16 11⁄8 11⁄4 13⁄8 13⁄8 11⁄2 15⁄8 13⁄4 17⁄8 21⁄8 21⁄2 25⁄8

100 25 100 100 100 100 25 100 100 100 100 100 100 100

1

⁄8 Width OR-210 — — VR-210 — — OR-211 QR-211 — OR-212 — — OR-214 — — OR-216 — — VR-216 — — OR-218 QR-218 — OR-220 — — OR-222 — — OR-223 — — OR-225 — — OR-228 — — OR-229 — —

210 210 211 212 214 216 216 218 220 222 223 225 228 229

3

⁄4 ⁄4 ⁄16 7 ⁄8 1 11⁄8 11⁄8 11⁄4 13⁄8 11⁄2 15⁄8 17⁄8 21⁄4 23⁄8 3

13

Buna-N O-Ring Assortments

Item No.

Qty in 300 Pc. Asst.

Qty in 400 Pc. Asst.

MK-A-5 MK-A-6 MK-A-7 MK-A-8 MK-A-9 MK-A-10 MK-A-11 MK-A-12 MK-C-210 MK-C-211 MK-C-212 MK-C-213 MK-C-214 MK-C-215 MK-C-216 MK-C-218

20 20 20 20 15 15 15 15 10 10 10 10 10 10 5 5

20 20 20 15 15 — 15 15 15 15 15 15 15 15 7 7

Body Diameter 1

⁄16 ⁄16 1 ⁄16 1 ⁄16 1 ⁄16 1 ⁄16 1 ⁄16 1 ⁄16 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1 ⁄8 1

OD 7

⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ ⁄ 1 11⁄16 11⁄8 13⁄16 11⁄4 15⁄16 13⁄8 11⁄2 32 1 4 9 32 5 16 11 32 3 8 7 16 1 2

Pack Qty.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Item No.

Description

MK-400-30 MK-300-24

400 Piece O-Ring Assortment 300 Piece O-Ring Assortment

Item No.

Qty in 300 Pc. Asst.

Qty in 400 Pc. Asst.

MK-C-220 MK-C-222 MK-B-110 MK-B-111 MK-B-112 MK-B-113 MK-B-114 MK-B-115 MK-D-325 MK-A-15 MK-A-14 MK-D-327 MK-D-329 MK-A-16 MK-A-13 MK-D-326 MK-C-217

5 5 15 15 15 15 10 10 — — — — — — — — —

7 7 20 20 15 15 15 15 5 5 5 5 5 5 5 5 7

Body Diameter 1

⁄8 1 ⁄8 3 ⁄32 3 ⁄32 3 ⁄32 3 ⁄32 3 ⁄32 3 ⁄32 3 ⁄16 1 ⁄16 1 ⁄16 3 ⁄16 3 ⁄16 1 ⁄16 1 ⁄16 3 ⁄16 1 ⁄8

OD

Pack Qty.

15⁄8 13⁄4 9 ⁄16 5 ⁄8 11 ⁄16 3 ⁄4 13 ⁄16 7 ⁄8 17⁄8 11 ⁄16 5 ⁄8 21⁄8 23⁄8 3 ⁄4 9 ⁄16 2 17⁄16

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

O-Ring Making Kit

Eliminates the need for extensive O-Ring inventories. Contains everything to make fast, on the spot O-Rings of any size.

Contains four 3' lengths of 3⁄32", 1⁄8", 3⁄16", and 1⁄4" Buna-N O-Ring cord, cord cutter, adhesive and splicing fixture. Replacement O-Ring cords come in 10 foot lengths.

964

Item No.

Description

Pack Qty.

PER-80851 PER-80851A PER-80851B PER-80851C PER-80851D

O-Ring Making Kit 3 ⁄32" Buna-N Cord 1 ⁄8" Buna-N Cord 3 ⁄16" Buna-N Cord 1 ⁄4" Buna-N Cord

1 1 1 1 1

MANIFOLDS Manifolds Nylon

A

Manifolds Single Sided Ports

B

4 Port

7.88

5.92 3.97 2.01

Port Size

B

8 Port

A NPT

Inlet

2.00 4.94 9.89

4 Port A

16 Port B

7.85 5.89 3.93 Port Size

1.96

Inlet

OPTIONAL CENTER PLUG

2.25 8.84 17.67

8 Port A 7.85 5.89 3.93 1.96

B Port Size Inlet

8.84 17.67

OPTIONAL CENTER PLUG

16 Port

An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections.

Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification.

Blue

White

Item No.

Item No.

No. of Ports

Inlet Size

NM-01 NM-02 NM-04 NM-05 NM-06 — NM-08 NM-13 NM-15 NM-16 NM-20*

NM-21 NM-22 NM-24 NM-25 NM-26 NM-27 — — — — —

4 4 4 8 8 8 8 16 16 16 16

1 1 11⁄2 1 1 11⁄2 11⁄2 1 11⁄2 11⁄2 11⁄2

Port Size 1

⁄4 3 ⁄8 1 ⁄2 1 ⁄4 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄4 3 ⁄8 1 ⁄2 1 ⁄2

A

B

Pack Qty.

1.81 1.81 2.42 1.81 1.81 2.42 2.42 1.81 2.42 2.42 2.42

1.51 1.51 1.98 1.51 1.51 1.98 1.98 1.51 1.98 1.98 1.98

1 1 1 1 1 1 1 1 1 1 1

H NPT D C Provides a convenient junction point for branching off a single line E J DIA. on distribution systems. Can be F G (8 HOLES 2 X SIDE) used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side).

Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic.

All threads are NPT.

4 Port

Item No.

MM-90 MM-50 MM-10 MM-210 MM-230* MM-200 MM-220 MM-240* MM-250* MM-260* MM-100 MM-60 MM-20 MM-320 MM-310 MM-330 MM-350* MM-360* MM-110 MM-70 MM-30 MM-420 MM-440* MM-410 MM-430 MM-450* MM-470* MM-120 MM-80 MM-40 MM-520 MM-530

No. of Ports

NPT A

B

1

⁄8 ⁄8 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 3 ⁄4 1 ⁄8 1 ⁄8 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄8 1 ⁄8 1 ⁄4 1 ⁄4 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 3 ⁄4 1 ⁄8 1 ⁄8 1 ⁄4 1 ⁄4 3 ⁄8

4 4 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 10 10 10 10 10

C

3.25 4.12 4.12 6.25 9.75 4.75 6.25 9.75 9.75 12.00 4.75 5.88 5.88 9.25 6.75 9.25 14.25 14.25 6.25 7.62 7.62 12.25 18.75 8.75 12.25 18.75 24.00 7.75 9.38 9.38 15.25 15.25

1 1

D

.70 .88 .88 .88 1.62 1.12 1.12 1.62 1.62 1.62 .70 .88 .88 .88 1.12 1.12 1.62 1.62 .70 .88 .88 .88 1.62 1.12 1.12 1.62 1.62 .70 .88 .88 .88 1.12

E

1.00 1.25 1.25 1.25 2.25 1.50 1.50 2.25 2.25 2.25 1.00 1.25 1.25 1.25 1.50 1.50 2.25 2.25 1.00 1.25 1.25 1.25 2.25 1.50 1.50 2.25 2.25 1.00 1.25 1.25 1.25 1.50

F

.75 .88 .88 1.50 2.25 1.00 1.50 2.25 2.25 3.00 .75 .88 .88 1.50 1.00 1.50 2.25 2.25 .75 .88 .88 1.50 2.25 1.00 1.50 2.25 3.00 .75 .88 .88 1.50 1.50

1.50 1.75 1.75 3.00 4.50 2.00 3.00 4.50 4.50 6.00 3.00 3.50 3.50 6.00 4.00 6.00 9.00 9.00 4.50 5.25 5.25 9.00 13.50 6.00 9.00 13.50 18.00 6.00 7.00 7.00 12.00 12.00

NPT H

G

1

.50 .75 .75 .88 1.50 .88 .88 1.50 1.50 1.50 .50 .75 .75 .88 .88 .88 1.50 1.50 .50 .75 .75 .88 1.50 .88 .88 1.50 1.50 .50 .75 .75 .88 .88

⁄4 ⁄8 ⁄8 3 ⁄8 1 1 ⁄2 1 ⁄2 1 1 1 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 1 ⁄2 1 1 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 1 1 ⁄2 1 ⁄2 1 1 1 ⁄4 3 ⁄8 3 ⁄8 3 ⁄8 1 ⁄2 3 3

B

A NPT H NPT

E

J DIA.

Item No.

MM-600 MM-610 MM-620 MM-700 MM-710 MM-720 MM-800 MM-810 MM-820 MM-900 MM-910 MM-920

No. of Ports

NPT A 1

⁄8 ⁄4 ⁄8 1 ⁄8 1 ⁄4 3 ⁄8 1 ⁄8 1 ⁄4 3 ⁄8 1 ⁄8 1 ⁄4 3 ⁄8

4 4 4 6 6 6 8 8 8 10 10 10

1 3

B

C

3.25 4.12 4.75 4.75 5.88 6.75 6.25 7.62 8.75 7.75 9.38 10.75

D

.70 .88 1.12 .70 .88 1.12 .70 .88 1.12 .70 .88 1.12

E

1.00 1.25 1.50 1.00 1.25 1.50 1.00 1.25 1.50 1.00 1.25 1.50

.75 .88 1.00 .75 .88 1.00 .75 .88 1.00 .75 .88 1.00

F

1.50 1.75 2.00 3.00 3.50 4.00 4.50 5.25 6.00 6.00 7.00 8.00

Red Item No.

— NM-303 NM-403 NM-207 — — — NM-321 NM-421 — NM-322 NM-422 — — NM-409 NM-218 — —

No. of Ports

Lgth.

4 8 8 8 8 16

11 11 11 11 11 19

Hole Series

A

Inlet

Port Size

1 & & & & &

1.75 1.50 1.75 1.75 2.50 1.75

1 ⁄4 1 1 11⁄2 1

⁄8 ⁄8 ⁄4 3 ⁄8 1 ⁄2 3 ⁄8

1 1 1 1 1

2 2 2 2 2

3

3

3

1

Pack Qty.

1 1 1 1 1 1

NPT H

G

1

.50 .75 .88 .50 .75 .88 .50 .75 .88 .50 .75 .88

⁄4 ⁄8 ⁄2 1 ⁄4 3 ⁄8 1 ⁄2 1 ⁄4 3 ⁄8 1 ⁄2 1 ⁄4 3 ⁄8 1 ⁄2 3 1

J

Pack Qty.

.170 .200 .200 .170 .200 .200 .170 .200 .200 .170 .200 .200

1 1 1 1 1 1 1 1 1 1 1 1

Right Angle for Single Manifold

Single Manifold

Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately.

G

F

Manifold Mounting Bracket Kit

Item No.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

D C

(8 HOLES 2 X SIDE)

Blue

.170 .200 .200 .200 .265 .200 .200 .265 .265 .265 .170 .200 .200 .200 .200 .200 .265 .265 .170 .200 .200 .200 .265 .200 .200 .265 .265 .170 .200 .200 .200 .200

Manifolds Double Sided Ports - 90 degree

Manifolds Aluminum

Item No.

Pack Qty.

*Not black anodized.

*Manifolds have a solid plug in the center.

Black

J

Two Manifolds

Item No.

Description

Pack Qty.

NM-101 NM-102 NM-103

For Single Manifold (2 Brackets, 2 Bolts) For Two Manifolds (2 Brackets, 4 Bolts) Right Angle for Single Manifold (2 Brackets, 2 Bolts)

1 1 1

Manifold Mounting Bracket

Item No.

NM-105

For Inlet Size 3

⁄4

Pack Qty.

1

Item No.

NM-106

For Inlet Size

1

Pack Qty.

1

Item No.

For Inlet Size

Pack Qty.

NM-107

1

1

1 ⁄2

965