K0020 "Actima" Clamping Device View from below clamp travel
travel path
°
25
°
end point right hand type
° 60
Material: Steel; housing thermoplastic; ball knob Duroplast PF 31; accessories steel.
start point left hand type
M6
end point left hand type
25
90°
45°
start point right hand type
travel path
Ø46
Type: Black oxide finish; housing black; ball knob red; accessories black oxide finish.
60°
with transverse axis in bore
drilled through
Part Number Example: K0020.10
Ø14 26
Ø55
Ø28
Ø14 H8
Ø14 H8
120
pressure bush, axial movement only
Ø37
34,5 2
54,5
10
clamping curve 0'
travel path
4°3
45°
9
46,5
self-locking clamp travel
65°
25°
10
F
F
10
2
386
push
2
pull
Note: The travel path is 10 mm. Self-locking occurs in any position within only 2 mm of clamp travel. Thus workpieces with tolerances of up to 1.5 mm can be safely clamped. The "Actima" Clamping Device can be fitted in any horizontal or vertical position. Standard parts allow further applications. They are available as optional accessories. All parts of the cam system subject to heavy loads are casehardened (pressure sleeve and accessories only if specified). The maximum permissible clamping force is approximately 4905 N.