FLYER January 2021

Page 20

Pilot Careers

I Get Paid for This…

Alan Stack

Trimming trees… Alan Stack flies with a huge 10-bladed saw hanging beneath his helicopter. Interview by Yayeri van Baarsen

How did you get into flying?

My uncle was a helicopter engineer for Bristow Helicopters in the UK and Nigeria. Afterwards, he formed Helicopter Support Ireland, close to our family farm. When I wasn’t helping out on the farm, I’d be in his hangar. He steered me in the right direction, letting me sit in the pilot’s seat and giving me Principles of Flight books. Tell us about your job?

I’m an aerial saw pilot, flying the MD500. Rotor Blade is based in South Carolina, but we work anywhere where there’s a need for Flying CV tree trimming or powerline constructing. Rotor Blades’ aerial saw pilot Most projects last months – I normally bring Alan Stack provides airborne my camper and fly back to the campground vegetation management services at night. I enjoy getting to meet new people. for overhead electric distribution and Side trimming is done with a 10-bladed, transmission lines. belt-driven aerial saw. Flying the 850lb saw Started current job May 2018 Now flying MD500 helicopter isn’t like flying any other external load. We Favourite aircraft MD500. “It gives you spend 100% of our flight time vertically sensational flight control response due to not referencing, which puts a demand on your having hydraulically assisted controls.” back and neck. The MD500 is the perfect Hours at job start 9,500 Hours now 11,300 platform for this precision work. It has a good lift-to-weight ratio and produces a relatively small amount of downwash which doesn’t disturb the tree line too much. Most of our work is low and slow. What’s been your favourite flight? Trimming speed is based on vegetation type: soft wood can be Working in Puerto Rico after Hurricane Maria destroyed the trimmed at 10mph, hard wood requires a slower trim. Knowing power grid in 2017. Together with thousands of linemen and what speed to cut is essential to avoid saw damage. multiple helicopters we rebuilt the power system. It was extremely My job is fascinating, it’s 100% hands-on flying, demanding satisfying to return power to the 3.4 million people who’d been your complete attention at all times. With tree trimming there’s the living in darkness for up to 11 months. The island was beautiful saw, and when constructing powerlines, I fly aerial linemen as despite the damage and the people were incredibly friendly. human external cargo. Holding someone 100ft below the helicopter, lowering them in between the powerline phases with And your favourite airfield? only inches of clearance to do their work, requires you to be alert, Ted Stevens Anchorage International Airport. It’s the gateway to precise and situationally aware. It’s definitely a team effort. We the last frontier, where beautiful snow-capped mountains meet the work in what’s known as the height-velocity diagram or dead man’s Cook Inlet. I’ve spent multiple summers in the backcountry, curve – this means in case of an engine failure, you can’t safely moving goldmine drills and flying cadastral surveys. As well as auto-rotate to the ground. So, excellent aircraft maintenance is of incredible scenery, Alaska has the world’s best salmon and halibut utmost importance. fishing, panning for gold along the river and enjoying time away.

“Flying the 850lb saw isn’t like flying any other external load”

What training did you have?

I have an FAA CPL(H), Transport Canada CPL(H) and EASA CPL(H). Rotor Blade provides extensive in-house training. All new pilots, whether they only have 1,500 flying hours or already 15,000 hours of vertical reference time, first become groundsmen. They learn everything about saw maintenance before stepping into the helicopter. After riding along on short saw cycles, they practise picking up and setting down the saw, and eventually trim easier lines. On average it takes a year until you’re ready to fly the saw. 20 | FLYER | January 2021

Do you fly much outside of work?

Flying is my passion. I’m currently pursuing my fixed-wing and glider pilot rating. I’d love to fly a fixed-wing to Florida Keys for the weekend, or to the Appalachians to go camping with my fiancé and our dogs. Unfortunately, time outside work is limited. What is your most valuable career advice?

In the helicopter industry, networking is of utmost importance. Most employment opportunities arise from a recommendation, so make sure to stay in contact with your peers.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.