9 lifting points

9. Lifting points Grade 8

Stainless steel

Grade 10

For sea containers

With ball bearings With bolt / weld-on

Product group 09.indd 1

02.08.2016 09:40:23

9 Instructions for using lifting points In multiple leg lifting, the angles are side angles, the angles between slings are correspondingly 0 – 90° (0-45° ) and 90 – 120° (45-90°).

Lifting eyes with thread must always be tightened with a tool onto the piece to be lifted. Avoid making it too tight, however.

If the lifter hook is attached directly to the lifting eye, it must fit in a way that the load is directed towards the hook bottom, not the tip.

If a lifting eye with a long thread is used in a hole with not thread and on the other end, a nut, you must ensure that the hole diameter is max. 10% bigger than that of the lifting eye and that the nut is tightened carefully and min. strength category 8.8. The screw must be so long that the entire length of the nut can be screwed to it.

DIN 580 and DIN 582 lifting points the operating temperature is -20 - (+)200°C Minimum thread lengths for different materials when using screw eyes, d = lifting eye thread diameter Steel

Cast iron

Aluminium

Aluminium - Magnesiumalloy

1xd

1,25 x d

2xd

2,5 x d

Grade 8 lifting eyes Lifting eye must be attached by twisting with hand or using a tool suitable for the work so that leg piece of the eye touches the surface of the item being lifted with its whole plane. Do not exceed the tightening torque given.

Secure lifting eyes arc pointing towards lifting direction. In multi legged lifts eye arc must also be towards the direction if lift. DIN 580 / DIN 582 type lifting eyes’ not to be loaded horizontally.

9-1 Product group 09.indd 2

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals 02.08.2016 09:40:23

DIN LIFTING POINTS

LIFTING EYE NUT FOR VERTICAL LIFTING DIN 582 Size

d2

d3

d1

mm mm mm mm mm 36 36 45 54 63 63 72 72 81 90 96

d4

h

k

LIFTING EYE SCREW FOR VERTICAL LIFTING DIN 580

Pac. Weight Product size code pc kg

M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27

20 20 25 30 35 35 40 40 45 50 55

20 36 8 20 36 8 25 45 10 30 53 12 35 62 14 35 62 14 40 71 16 40 71 16 45 80,5 18 50 90 20 53 97 22

50 50 50 25 25 10 10 10 1 1 1

0,048 0,05 0,09 0,16 0,24 0,24 0,36 0,36 0,58 0,72 0,7

NSM06 NSM08 NSM10 NSM12 NSM14 NSM16 NSM18 NSM20 NSM22 NSM24 NSM27

M30

65 108 60 109 24

1

1,32

NSM30

M33 M36 M39 M42 M45 M48 M52 M56 M64

65 75 85 85 100 100 110 110 120

1 1 1 1 1 1 1 1 1

1,3 2,08 2,02 3,11 3,04 5,02 4,95 6,69 9,3

NSM33 NSM36 NSM39 NSM42 NSM45 NSM48 NSM52 NSM56 NSM64

108 126 144 144 166 166 184 184 206

60 70 80 80 90 90 100 100 110

109 128 147 147 168 168 187 187 208

24 28 32 32 38 38 42 42 48

9

Size

d2

d1

mm mm mm mm mm mm

M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 M56 M64

20 20 25 30 35 35 40 40 45 50 55 65 65 75 85 85 100 100 110 110 120

d3

36 36 45 54 63 63 72 72 81 90 96 108 108 126 144 144 166 166 184 184 206

d4

h

20 20 25 30 35 35 40 40 45 50 53 60 60 70 80 80 90 90 100 100 110

36 36 45 53 62 62 71 71 80,5 90 97 109 109 128 147 147 168 168 187 187 208

k

l

8 13 8 13 10 17 12 20,5 14 27 14 27 16 30 16 30 18 35 20 36 22 39 24 45 24 45 28 54 32 63 32 63 38 68 38 68 42 78 42 78 48 90

Pac. Weight Product size code pc kg 50 50 50 25 25 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1

0,05 0,06 0,11 0,18 0,28 0,28 0,45 0,45 0,67 0,87 0,88 1,66 1,66 2,65 4,03 4,03 6,38 6,38 8,8 8,8 12,4

NSR06 NSR08 NSR10 NSR12 NSR14 NSR16 NSR18 NSR20 NSR22 NSR24 NSR27 NSR30 NSR33 NSR36 NSR39 NSR42 NSR45 NSR48 NSR52 NSR56 NSR64

WLL STORE-PACKED size

WLL t

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 M56 M64 M72 M80 M100

0,08 0,14 0,23 0,34 0,34 0,70 0,70 1,20 1,20 1,80 2,50 3,20 3,20 4,60 4,60 6,30 6,30 8,60 8,60 11,50 16,00 20,00 28,00 40,00

not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed

0,16 0,28 0,46 0,68 0,68 1,40 1,40 2,40 2,40 3,60 5,00 6,40 6,40 9,20 9,20 12,60 12,60 17,20 17,20 23,00 32,00 40,00 56,00 80,00

not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed

0,05 0,10 0,17 0,24 0,24 0,50 0,50 0,83 0,83 1,27 1,78 2,28 2,28 3,28 3,28 4,50 4,50 6,10 6,10 8,30 11,00 14,28 20,00 28,57

not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed

0,08 0,14 0,23 0,34 0,34 0,70 0,70 1,20 1,20 1,80 2,50 3,20 3,20 4,60 4,60 6,30 6,30 8,60 8,60 11,50 16,00 20,00 28,00 40,00

not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed not allowed

Larger sizes also available with 2-3 weeks delivery time

Type nut nut nut nut screw screw screw screw

Store packed pcs 4 2 2 1 4 2 2 1

Package size pcs 15 15 15 15 15 15 15 15

NSM06IP4 NSM08IP2 NSM10IP2 NSM12IP1 NSR06IP4 NSR08IP2 NSR10IP2 NSR12IP1

The other Store-packed products can be found on page 15-6

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals Product group 09.indd 3

Product code

9-2 02.08.2016 09:40:26

9

GRADE 8

LIFTING EYES FOR ALL LIFTING DIRECTIONS, GRADE 8

• • • • •

Grade 8 the WLL for vertical lifting is marked on the eye in lateral lifting, the load is 25% of the vertical lifting WLL powder coated surface safety factor 4 : 1 Size

Eye nut

Eye screw

D

Ø

L

Weight

M

mm

mm

mm

kg

M6 M8 M10 M12 M14 M16 M20 M24 M30 M36 M42 M48

36 36 45 54 63 63 72 90 108 126 144 166

20 20 25 30 35 35 40 50 60 70 80 90

36 36 45 53 62 62 71 90 109 128 147 168

0,049 0,05 0,09 0,16 0,24 0,24 0,36 0,72 1,32 2,08 3,11 5,02

Size

D

K

Ø

L

Weight

M

mm

mm

mm

mm

kg

M6 M8 M10 M12 M14 M16 M20 M24 M30 M36 M42 M48

28 39 45 54 63 63 72 90 108 126 144 166

13 15 18 22 28 28 30 38 45 55 65 70

16 20 25 30 35 35 40 50 60 70 80 90

42 51 63 75 88 88 101 128 154 183 212 238

0,05 0,06 0,11 0,18 0.28 0,28 0,45 0,87 1,66 2,65 4,03 6,38

Product code

NS8M06 NS8M08 NS8M10 NS8M12 NS8M14 NS8M16 NS8M20 NS8M24 NS8M30 NS8M36 NS8M42 NS8M48

Product code

NS8R06 NS8R08 NS8R10 NS8R12 NS8R14 NS8R16 NS8R20 NS8R24 NS8R30 NS8R36 NS8R42 NS8R48

WLL Torque

9-3 Product group 09.indd 4

size

WLL t

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

Nm

M6

0,40

0,15

0,80

0,20

0,14

0,10

0,21

0,15

3,5

M8

1,00

0,40

2,00

0,50

0,35

0,25

0,52

0,37

8,0

M10

1,00

0,40

2,00

0,50

0,35

0,25

0,52

0,37

16,0

M12

2,00

0,75

4,00

1,00

2,80

0,50

1,00

0,75

28,0

M14

4,00

1,50

8,00

2,00

1,40

1,00

2,10

1,50

70,0

M16

4,00

1,50

8,00

2,00

1,40

1,00

2,10

1,50

70,0

M20

6,00

2,30

12,00

3,00

2,10

1,50

3,15

2,25

135,0

M24

8,00

3,20

16,00

4,00

2,80

2,00

4,20

3,00

230,0

M30

12,00

4,50

24,00

6,00

4,20

3,00

6,30

4,50

465,0

M36

16,00

7,00

32,00

8,00

5,60

4,00

8,40

6,00

814,0

M42

24,00

9,00

48,00

12,00

8,40

6,00

12,60

9,00

1304,0

M48

32,00

12,00

64,00

16,00

11,20

8,00

16,80

12,00

1981,0

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals 02.08.2016 09:40:29

GRADE 8

9

LIFTING EYE WITH BOLT FOR ALL LIFTING DIRECTIONS, GRADE 8

• • • • • •

grade 8 lifting in all positions can be turned according to direction of lift separate attachment bolt powder coated surface safety factor 4 : 1

Size d x L mm

A

B

C

F

H

Weight

mm

mm

mm

mm

mm

kg

25 25 25 35 35 35 50 50 60

45 45 45 63 63 63 90 90 108

25 25 25 35 35 35 50 50 62

10 10 10 14 14 14 20 20 24

45 45 45 62 62 62 90 90 109

0,09 0,09 0,11 0,27 0,29 0,30 0,86 0,90 1,70

M6 x 15 M8 x 15 M10 x 16 M12 x 22 M14 x 20 M16 x 29 M20 x 32 M24 x 40 M30 x 45

Product code

NSR06P NSR08P NSR10P NSR12P NSR14P NSR16P NSR20P NSR24P NSR30P

WLL Torque

Size

WLL t

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

Nm

M6

0,40

0,10

0,80

0,20

0,14

0,10

0,21

0,15

3,5

M8

0,80

0,20

1,60

0,40

0,28

0,20

0,42

0,30

8,0

M10

1,00

0,25

2,00

0,50

0,35

0,25

0,52

0,37

16,0

M12

1,60

0,40

3,20

0,80

0,56

0,40

0,84

0,60

28,0

M16

4,00

1,00

8,00

2,00

1,40

1,00

2,10

1,50

70,0

M20

6,00

1,50

12,00

3,00

2,10

1,50

3,15

2,25

135,0

M24

8,00

2,00

16,00

4,00

2,80

2,00

4,20

3,00

230,0

M30

12,00

3,00

24,00

6,00

4,20

3,00

6,30

4,50

465,0

M36

16,00

4,00

32,00

8,00

5,60

4,00

8,40

6,00

814,0

M42

24,00

6,00

48,00

12,00

8,40

6,00

12,60

9,00

1304,0

M48

32,00

8,00

64,00

16,00

11,20

8,00

16,80

12,00

1981,0

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals Product group 09.indd 5

9-4 02.08.2016 09:40:31

9

GRADE 10

BOLT-ON LIFTING EYE SCREWS FOR ALL LIFTING DIRECTIONS, GRADE 10

• • • • • •

grade 10 lifting in all positions can be turned to the direction of the force the bolt is attached to the eye with a lockable slug powder coated surface safety factor 4 : 1 Size

A

B

C mm

D Ø mm

E Ø mm

G Ø mm

M

mm

mm

M8 M10 M12 M16 M20 M24 M30 M36 M42 M48

52,5 52,5 62,4 71,5 79,9 96,9 123,9 124,9 148,0 164,9

12 12 15 16 18 23 27 37 40 45

K Ø mm

L

Product code

8,5 8,5 8,5 15 17 20 28 38 41 47

25 25 30 35 40 48 60 80 90 95

32 32 44 56 58 73 80 95 105 120

34 49 15 NS10M08 34 49 15 NS10M10 46 58 18 NS10M12 60 67 24 NS10M16 60 76 30 NS10M20 76 94 36 NS10M24 84 114 45 NS10M30 99 154 54 *NS10M36 114 170 63 *NS10M42 129 185 72 *NS10M48 *Items marked with asterisk delivery 2-3 weeks

mm

WLL Torque

9-5 Product group 09.indd 6

Size

WLL t

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

M8

1,00

0,40

2,00

0,80

0,56

0,40

0,84

0,60

8,0

M10

1,00

0,40

2,00

0,80

0,56

0,40

0,84

0,60

16,0

Nm

M12

2,00

0,75

4,00

1,50

1,00

0,75

1,60

1,12

28,0

M16

4,00

1,50

8,00

3,00

2,00

1,50

3,15

2,25

70,0

M20

6,00

2,30

12,00

4,60

3,22

2,30

4,83

3,45

135,0

M24

8,00

3,20

16,00

6,40

4,48

3,20

6,70

4,80

230,0

M30

12,00

4,50

24,00

9,00

6,30

4,50

9,40

6,70

465,0

M36

16,00

7,00

32,00

14,00

9,80

7,00

14,70

10,5

814,0

M42

24,00

9,00

48,00

18,00

12,60

9,00

18,90

13,5

1304,0

M48

32,00

12,00

64,00

24,00

16,80

12,00

25,20

18,0

1981,0

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals 02.08.2016 09:40:32

GRADE 8

9

LIFTING EYE SCREW WITH SWIVEL FOR ALL LIFTING DIRECTIONS, GRADE 8

• • • • •

grade 8 eye tuns to the direction of the force paint coated safety factor 4 : 1 also available with longer 120mm thread Size

b

e

g

t

Weight

mm

Lifting eye dimensions eye diam. x height x width mm

d

mm

mm

mm

M10 M12 M16 M20 M24 M30 M30 M36 M42 M45 M48 M56 M64

36 36 36 50 57 66 80 80 80 80 80 117 117

18 18 40 30 40 35 35 50 50 60 50 84 95

51 51 52 68 78 97 112 109 109 109 109 310 310

41 41 42 56 65,5 80,5 92 89,5 89,5 89,5 89,5 280 280

14x55x30 14x55x30 14x55x30 16x70x34 18x85x37 20x85x37 22x115x50 22x115x50 25x115x50 25x115x50 25x115x50 32x152x70 32x152x70

0,43 0,44 0,46 0,96 1,45 2,17 3,57 4,17 3,67 4,17 4,02 11,6 12,6

Product code

Product code 120mm thread

kg NS8KL1003 NS8KL1205 NS8KL161 NS8KL202 NS8KL2432 NS8KL3053 NS8KL308 NS8KL368 NS8KL4210 NS8KL4510 NS8KL4810 NS8KL5615 NS8KL6415

NS8KL161120 NS8KL202120 NS8KL243120 NS8KL305120 NS8KL308120 NS8KL368120 -

WLL Torque Size

WLL t

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

M10

0,9

0,45

1,2

0,6

0,4

0,3

0,6

0,5

10-16

M12

1,0

0,5

2,0

1,0

0,8

0,5

1,1

0,8

15-28

Nm

M16

2,0

1,1

4,0

2,2

1,5

1,1

2,4

1,6

45-70

M20

4,0

2,0

8,0

4,0

2,8

2,0

4,0

3,0

75-130

M24

6,3

3,2

12,6

6,3

4,3

3,2

6,3

4,7

90-130

M30

10,6

5,3

21,2

10,6

7,1

5,3

11,1

8,0

230-400

M30

11,8

8,0

23,6

16,0

11,2

8,0

16,0

11,8

230-400

M36

11,8

8,0

23,6

16,0

11,2

8,0

16,0

11,8

270-600

M42

15,0

10,0

30,0

20,0

14,0

10,0

21,0

15,0

270-700

M45

15,0

10,0

30,0

20,0

14,0

10,0

21,0

15,0

350-800

M48

15,0

10,0

30,0

20,0

14,0

10,0

21,0

15,0

350-800

M56

25,0

15,0

50,0

25,0

21,0

15,0

31,5

25,0

350-900

M64

25,0

15,0

50,0

25,0

21,0

15,0

31,5

25,0

350-900

Pitkäkierteinen

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals Product group 09.indd 7

9-6 02.08.2016 09:40:34

9

GRADE 10

LIFTING EYE SCREWS WITH SWIVEL FOR ALL LIFTING DIRECTIONS, GRADE 10

• • • •

grade 10 eye tuns to the direction of the force paint coated/yellow chromated safety factor 4 : 1 Size

WLL 90° liftings

b

g

t

dxe

t

mm

mm

mm

M 10 x 18 M 12 x 18 M 14 x 20 M 16 x 30 M 20 x 30 M 20 x 40 M 24 x 30 M 24 x 45 M 30 x 35 M 30 x 45 M 30 x 45 M 36 x 50 M 42 x 50 M 45 x 60 M 48 x 72 M 48 x 60 M 56 x 78 M 64 x 96 M 64 x 96 M 72 x 120 M 80 x 150 M 90 x 115 M 100 x 150

0,5 0,7 1,0 1,4 1,7 2,5 1,7 4,0 4,0 6,7 8,0 10,0 12,5 17,0 12,0 17,0 18,0 20,0 28,0 28,0 28,0 40,0 40,0

36,5 36,5 36,5 36,5 36,5 52 36,5 57 57 70 81 81 81 104 81 104 104 104 129 129 129 170 170

48 48 48 48 48 68 48 75 75 95 106 106 106 127 106 127 127 127 174 174 174 233 233

41 41 41 41 41 57 41 63 63 78 86 86 86 106 86 106 106 106 135 135 135 182 182

Lifting eye dimensions eye diam.x height x width

Weight

13x55x32 13x55x32 13x55x32 13x55x32 13x55x32 16x70x34 13x55x32 18x85x45 18x85x45 20x85x45 23x115x60 23x115x60 23x115x60 30x140x70 23x115x60 30x140x70 30x140x70 30x140x70 35x170x80 35x170x80 35x170x80 46x240x110 46x240x110

0,42 0,43 0,42 0,44 0,46 0,97 0,49 1,48 1,50 2,37 3,64 3,72 3,82 7,50 4,33 7,57 8,00 8,85 16,30 17,60 19,50 36,50 39,80

mm

Product code

kg NS10KL10005 NS10KL12007 NS10KL14010 NS10KL16014 NS10KL20017 NS10KL20025 NS10KL24017 NS10KL2404 NS10KL3004 NS10KL30067 NS10KL3008 NS10KL3610 NS10KL4212 NS10KL4517 NS10KL4812 NS10KL4817 NS10KL5618 NS10KL6420 NS10KL6428 NS10KL7228 NS10KL8028 NS10KL9040 NS10KL10040

Delivery 2-3 weeks

Many sizes available also with shorter and longer threads, ask for more!

Torque Size

WLL t

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

Nm

M 10 x 18

1,0

0,5

2,0

1,0

0,7

0,5

1,0

0,8

10 - 40

M 12 x 18

1,4

0,7

2,8

1,4

1,0

0,7

1,4

1,0

15 - 40

M 14 x 20

2,0

1,0

4,0

2,0

1,4

1,0

2,1

1,5

30 - 40

M 16 x 30

2,8

1,4

5,6

2,8

2,0

1,4

3,0

2,1

45 - 130

M 20 x 30

3,4

1,7

6,8

3,4

2,4

1,7

3,6

2,5

75 - 130

M 20 x 40

5,0

2,5

10,0

5,0

3,6

2,5

5,3

3,8

100 - 170

M 24 x 30

3,4

1,7

6,8

3,4

2,4

1,7

3,6

2,5

90 - 130

M 24 x 45

8,0

4,0

16,0

8,0

5,6

4,0

8,5

6,0

190 - 280

M 30 x 35

8,0

4,0

16,0

8,0

5,6

4,0

8,5

6,0

190 - 280

M 30 x 45

12,0

6,7

24,0

13,4

9,5

6,7

14,0

10,0

230 - 400

M 30 x 45

12,0

8,0

24,0

16,0

11,2

8,0

16,0

12,0

270 - 600

M 36 x 50

15,0

10,0

30,0

20,0

14,0

10,0

21,2

15,0

270 - 600

M 42 x 50

15,0

12,5

30,0

25,0

17,0

12,5

25,0

18,0

270 - 700

M 45 x 60

25

17,0

50,0

34,0

23,5

17,0

35,0

25,0

350 - 800

M 48 x 72

15

12,5

30,0

25,0

17,0

12,5

25,0

18,0

270 - 700

M 48 x 60

25

17,0

50,0

34,0

23,5

17,0

35,0

25,0

350 - 800

M 56 x 78

25

18,0

50,0

36,0

25,0

18,0

37,5

26,5

350 - 900

M 64 x 96

25

20,0

50,0

40,0

28,0

20,0

42,5

30,0

350 - 900

M 64 x 96

32,5

28,0

65,0

56,0

39,0

28,0

58,0

42,0

500 - 1000

M 72 x 120

32,5

28,0

65,0

56,0

39,0

28,0

58,0

42,0

500 - 1200

M 80 x 150

32,5

28,0

65,0

56,0

39,0

28,0

58,0

42,0

500 - 1200

M 90 x 115

50

40,0

100,0

80,0

56,0

40,0

84,0

60,0

500 - 1500

M 100 x 150

50

40

100,0

80,0

56,0

40,0

84,0

60,0

500 - 1700

9-7 Product group 09.indd 8

45° 60°

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals 02.08.2016 09:40:36

9

GRADE 10

BOLTABLE LIFTING EYE NUT WITH SWIVEL FOR ALL LIFTING DIRECTIONS, GRADE 10

• grade 10 • eye tuns to the direction of

Size

a

Øb

g

SW

T

Lifting eye dimensions Ø x t1 x b 1

Weight

mm

mm

mm

mm

mm

mm

kg

45 52 66 80 94 107

36,5 36,5 52 57 70 80

73 80 106 120 148 164

34 34 46 50 65 75

66 73 95 108 131 145

13 x 55 x 32 13 x 55 x 32 16 x 70 x 34 18 x 85 x 45 20 x 85 x 45 23 x 115 x 60

the force

• paint coated/yellow chromated

• safety factor 4 : 1 M12 x 15 M16 x 20 M20 x 25 M24 x 30 M30 x 40 M36 x 45

Product code

0,61 NS10KL1205P 0,65 NS10KL1610P 1,50 NS10KL2017P 2,12 NS10KL242P 3,70 NS10KL3032P 5,75 NS10KL365P Delivery 2-3 weeks Torque

Size

WLL t

WLL t stamp in the eye

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

Nm

M12 x 15

1,40

0,50

2,80

1,00

0,70

0,50

1,00

0,75

15-40

M16 x 20

2,80

1,00

5,60

2,00

1,40

1,00

2,12

1,50

45-130

M20 x 25

5,00

1,70

10,0

3,40

2,40

1,70

3,55

2,50

100-170

M24 x 30

8,00

2,10

16,0

4,00

2,80

2,10

4,25

3,15

190-280

M30 x 40

12,00

3,20

24,0

6,40

4,25

3,15

6,70

4,75

230-400

M36 x 45

15,00

5,00

30,0

10,00

6,70

5,00

10,00

7,50

270-600

45° 60°

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals Product group 09.indd 9

9-8 02.08.2016 09:40:38

9

GRADE 10

WELD-ON LIFTING POINT WITH SWIVEL FOR ALL LIFTING DIRECTIONS, GRADE 10

• • • •

grade 10 eye tuns to the direction of the force paint coated/yellow chromated safety factor 4:1 a

5,5 x 45° 7,0 x 45° 8,5 x 45° 10,0 x 45° 12,0 x 45°

b

g

t

Lifting eye dimensions Ø x t1 x b 1

Weight

mm

mm

mm

mm

kg

52 57 70 80 100

68 74 95 102 129

57 62 78 83 106

16 x 70 x 34 18 x 85 x 45 20 x 85 x 45 23 x 115 x 60 30 x 140 x 70

0,95 1,30 2,20 3,80 6,66

Product code

NS10KL2HI NS10KL4HI NS10KL6HI NS10KL10HI NS10KL17HI Delivery 2-3 weeks

WLL

Product code

NS10KL2HI

WLL t

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

5,00

2,50

10,00

5,00

3,55

2,50

5,30

3,75

NS10KL4HI

8,00

4,00

16,00

8,00

5,60

4,00

8,50

6,00

NS10KL6HI

12,00

6,70

24,00

13,40

9,50

6,70

14,00

10,00

NS10KL10HI

15,00

10,00

30,00

20,00

14,00

10,00

21,20

15,00

NS10KL17HI

25,00

17,00

50,00

34,00

23,50

17,00

35,00

25,00

b1

Ø

g

t1

t a b

45° 60°

9-9 Product group 09.indd 10

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals 02.08.2016 09:40:40

9

GRADE 8

TURNABLE LIFTING POINT FOR ALL LIFTING DIRECTIONS, GRADE 8

• • • •

grade 8 the eye is equipped with a separate replaceable screw min. screw strength category 8.8 eye tuns to the direction of the force

• paint coated • safety factor 4 : 1

Size

A

B

C

D

E

E´

F

H

J

K

L

R

Weight

M

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

kg

M8 M10 M12 M16 M20 M24 M30 M36 M42 M48

30 32 32 46 46 46 60 77 95 95

55 65 65 85 85 85 114 124 158 158

35 36 36 50 50 50 65 85 104 104

35 42 43 50 53 55 75 101 112 120

40 56 56 72 72 72 100 97,5 108 103

30 29 41 38 36 53 -

10 14 14 16 16 16 22 26,5 36 36

12 15 20 25 30 40 50 62 60 69

74 74 95 95 95 136 -

35 35 45 45 45 67 -

50 55 65 70 80 110 -

35 35 46 46 46 66 -

0,2 0,4 0,4 1,0 1,1 1,2 3,3 5,8 10,9 11,6

Product code

NS8P03 NS8P05 NS8P07 NS8P15 NS8P25 NS8P30 NS8P50 NS8P80 NS8P150 NS8P200

WLL Torque

Size

WLL t stamp in the eye

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

max.

Nm

M8

0,30

0,30

0,60

0,60

0,42

0,30

0,63

0,45

30,0

M10

0,50

0,50

1,00

1,00

0,70

0,50

1,05

0,75

40,0

M12

0,75

0,75

1,50

1,50

1,05

0,75

1,58

1,13

65,0

M16

1,50

1,50

3,00

3,00

2,10

1,50

3,15

2,25

150,0

M20

2,50

2,50

5,00

5,00

3,50

2,50

5,25

3,75

250,0

M24

3,00

3,00

6,00

6,00

4,20

3,00

6,30

4,50

300,0

M30

5,00

5,00

10,00

10,00

7,00

5,00

10,50

7,50

500,0

M36

8,00

8,00

16,00

16,00

11,20

8,00

16,80

12,00

800,0

M42

15,00

15,00

30,00

30,00

21,00

15,00

31,50

22,50

1500,0

M48

20,00

20,00

40,00

40,00

28,00

20,00

42,00

30,00

2000,0

Min. screw strength category 8.8

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals Product group 09.indd 11

9 - 10 02.08.2016 09:40:41

9

GRADE 8

LIFTING EYE WITH SWIVEL FOR ALL LIFTING DIRECTIONS, GRADE 8

• Grade 8 • eye tuns to the direction of the force

• safety factor 5 : 1

Size

L1

S1

S2

A

B

C

D

E

F

G

H

M

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

mm

M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30

15 15 15 14 17 21 23 27 27 30 33 36 40 45

3 4 5 8 8 8 8 8 8 8 14 14 14 14

16 16 16 20 20 20 20 24 24 24 24

33 33 33 33 33 33 45 45 45 45 62 62 62 62

30 30 30 30 30 30 42 42 42 42 55 55 55 55

30 30 30 30 30 30 45 45 45 45 60 60 60 60

WLL

Product code

38 27 14 53 9,5 *NS8KL04M 38 27 14 53 9,5 *NS8KL05M 38 27 14 53 9,5 NS8KL06M 38 27 14 53 9,5 NS8KL08M 38 27 14 53 9,5 NS8KL10M 38 27 14 53 9,5 NS8KL12M 54 38 17 76 13 NS8KL14M 54 38 17 76 13 NS8KL16M 54 38 17 76 13 NS8KL18M 54 38 17 76 13 NS8KL20M 83 55 25 117 19 NS8KL22M 83 55 25 117 19 NS8KL24M 83 55 25 117 19 NS8KL27M 83 55 25 117 19 NS8KL30M *Items marked with an asterisk delivery in approx. 2 weeks

Torque

Size

WLL t

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

Nm

M4

0,050

0,050

0,10

0,10

0,07

0,050

0,105

0,050

2

M5

0,075

0,075

0,15

0,15

0,10

0,075

0,158

0,075

3

M6

0,10

0,10

0,20

0,20

0,14

0,10

0,210

0,10

4

M8

0,30

0,30

0,60

0,60

0,40

0,30

0,60

0,30

5

M10

0,60

0,60

1,20

1,20

0,80

0,60

1,30

0,60

10

M12

1,00

1,00

2,00

2,00

1,40

1,00

2,10

1,00

15

M14

1,30

1,30

2,60

2,60

1,80

1,30

2,70

1,30

30

M16

1,60

1,60

3,20

3,20

2,20

1,60

3,40

1,60

50

M18

2,00

2,00

4,00

4,00

2,80

2,00

4,20

2,00

70

M20

2,50

2,50

5,00

5,00

3,50

2,50

5,30

2,50

100

M22

3,00

3,00

6,00

6,00

4,20

3,00

6,30

3,00

120

M24

4,00

4,00

8,00

8,00

5,60

4,00

8,40

4,00

160

M27

5,00

5,00

10,00

10,00

7,00

5,00

10,50

5,00

200

M30

6,30

6,30

12,60

12,60

8,80

6,30

13,20

6,30

250

Ask also for bigger sizes, inch-threaded and stainless steel models!

9 - 11 Product group 09.indd 12

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals 02.08.2016 09:40:42

9

GRADE 8

INCH-THREADED BOLTABLE LIFTING EYE WITH SWIVEL FOR ALL LIFTING DIRECTIONS, GRADE 8

• • • • • •

grade 8 inch-threaded lifting in all positions eye tuns to the direction of the force powder coated surface safety factor 4 : 1

Size

UNC 3/8” UNC 1/2” UNC 5/8” UNC 3/4” UNC 1” UNC 1”1/4 UNC 1”1/2

L1

S

A

B

C

D

Weight Product code

mm

mm

mm

mm

mm

mm

kg

16 21 27 30 36 45 62

4 4 8 8 14 14 14

30 30 38 38 58 58 88

34 34 45 45 70 70 94

60 60 90 90 134 134 190

57 57 78 78 115 115 166

0,24 0,24 0,80 0,80 2,60 2,60 8,00

NS8R3/8 NS8R1/2 NS8R5/8 NS8R3/4 NS8R1 *NS8R114 *NS8R112

*Items marked with an asterisk delivery in approx. 2 weeks WLL (lbs) Torque max. foot lbs.

Size

WLL lbs

WLL lbs

WLL lbs

WLL lbs

WLL lbs 0 - 45°

WLL lbs 45 - 60°

WLL lbs 0 - 45°

WLL lbs 45 - 60°

UNC 3/8”

1200

1200

2400

1200

1680

1200

2520

1200

8 F.L

UNC 1/2”

2200

2200

4400

2200

3080

2200

4620

2200

12 F.L

UNC 5/8”

3800

3800

7600

3800

5320

3800

7980

3800

40 F.L

UNC 3/4”

5500

5500

11000

5500

7700

5500

11550

5500

80 F.L

UNC 1”

10000

10000

20000

10000

14000

10000

21000

10000

125 F.L

UNC 1”1/4

14000

14000

28000

14000

19600

14000

29400

14000

200 F.L

UNC 1”1/2

20000

20000

40000

20000

28000

20000

42000

20000

300 F.L

WLL (t) Torque

Size

WLL t

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

max.

Nm

UNC 3/8”

0,544

0,544

1,089

0,544

0,762

0,544

1,143

0,544

10,8464

UNC 1/2”

0,998

0,998

1,996

0,998

1,397

0,998

2,096

0,998

16,2696

UNC 5/8”

1,724

1,724

3,447

1,724

2,413

1,724

3,620

1,724

54,232

UNC 3/4”

2,495

2,495

4,990

2,495

3,493

2,495

5,239

2,495

108,464

UNC 1”

4,536

4,536

9,072

4,536

6,350

4,536

9,526

4,536

169,475

UNC 1”1/4

6,350

6,350

12,701

6,350

8,891

6,350

13,336

6,350

271,16

UNC 1”1/2

9,072

9,072

18,144

9,072

12,701

9,072

19,051

9,072

406,74

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals Product group 09.indd 13

9 - 12 02.08.2016 09:40:43

9

GRADE 8

WELD-ON LIFTING POINT FOR ALL LIFTING DIRECTIONS, GRADE 8

• • • • •

grade 8 lifting in all positions powder coated surface equipped with a spring that holds the eye in desired position safety factor 4 : 1

A

B

D

M

Weight

mm

mm

mm

mm

kg

41,0 42,0 45,0 55,0 70,0 97,0

78,5 88,0 94,0 118,0 141,0 188,0

13,0 14,0 17,0 22,0 26,5 34,0

37,0 40,0 42,5 50,0 66,5 90,0

0,40 0,47 0,69 1,46 2,50 5,79

Product code

NS8HI1 NS8HI2 NS8HI3 NS8HI5 NS8HI8 NS8HI15

WLL

Product code

Lifting not allowed in this direction!

WLL t

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

NS8HI1

1,12

1,12

2,24

2,24

1,50

1,12

2,35

1,68

NS8HI2

2,00

2,00

4,00

4,00

2,80

2,00

4,20

3,00 4,75

NS8HI3

3,15

3,15

6,30

6,30

4,25

3,15

6,61

NS8HI5

5,30

5,30

10,60

10,60

7,10

5,30

11,13

7,95

NS8HI8

8,00

8,00

16,00

16,00

11,20

8,00

16,80

12,00

NS8HI15

15,00

15,00

30,00

30,00

21,20

15,00

31,50

22,50

WELD-ON LIFTING POINT, GRADE 8

• • • •

grade 8 with two welding points powder coated surface safety factor 4 : 1

A

B

C

D

E

F

G

H

Weight Product code

mm

mm

mm

mm

mm

mm

mm

mm

kg

14 20 22 31 42

65 83 96 126 175

48 60 65 90 130

29 39 48 55 79

134 169 196 264 371

14 16 19,5 29 45

60 88 98 127 157

79 103 118 155 217

0,73 1,80 3,00 5,75 16,00

NS8J04 NS8J06 NS8J10 NS8J16 NS8J30

WLL

Product code

WLL t

WLL t

NS8J04

4,00

4,00

NS8J06

6,70

6,70

NS8J10

10,00

10,00

NS8J16

16,00

16,00

NS8J30

30,00

30,00

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

8,00

8,00

5,60

4,00

8,40

6,00

13,40

13,40

9,38

6,70

14,10

10,10

20,00

20,00

14,00

10,00

21,10

15,00

32,00

32,00

22,40

16,00

33,60

24,00

60,00

60,00

42,00

30,00

63,00

45,00

Lifting not allowed in this direction!

9 - 13 Product group 09.indd 14

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals 02.08.2016 09:40:46

STAINLESS STEEL AND GRADE 8

9

STAINLESS STEEL LIFTING EYE FOR VERTICAL LIFTS LIFTING EYE NUT DIN 582 • polished surface • material AISI 316

Size

b

c

d

e

f

Product code

mm

Weight kg/ 100 pc

a

mm

mm

mm

mm

M6 M8 M10 M12 M16 M20

20,0 20,0 25,0 30,0 35,0 39,0

36,0 36,0 45,0 54,0 63,0 71,0

20,0 20,0 25,0 30,0 35,0 39,0

8,5 8,5 10,0 11,0 13,0 14,0

36,0 36,0 45,0 53,0 62,0 70,0

5,0 5,0 9,0 16,0 24,0 36,0

NSMH06L NSMH08L NSMH10L NSMH12L NSMH16L NSMH20L

Other sizes also available.

LIFTING EYE SCREW DIN 580 • polished surface • material AISI 316

Size

b

a

c

d

e

f

g

mm mm mm mm mm mm

M6 M8 M10 M12 M16 M20

20,0 20,0 25,0 30,0 35,0 39,0

36,0 36,0 45,0 54,0 63,0 71,0

20,0 20,0 25,0 30,0 35,0 39,0

13,0 6,0 36,0 13,0 6,0 36,0 17,0 8,0 45,0 20,5 10,0 53,0 27,0 12,0 62,0 30,0 14,0 70,0

Weight kg/ 100 pc

Product code

6,0 6,0 11,0 18,0 28,0 45,0

NSRH06L NSRH08L NSRH10L NSRH12L NSRH16L NSRH20L

Other sizes also available.

kierre

WLL t

WLL t

WLL t

WLL t

WLL t 0 - 45°

WLL t 45 - 60°

WLL t 0 - 45°

WLL t 45 - 60°

M6

0,08

not allowed

0,16

not allowed

-

not allowed

-

not allowed

M8

0,14

not allowed

0,28

not allowed

0,10

not allowed

0,14

not allowed

M10

0,23

not allowed

0,46

not allowed

0,17

not allowed

0,23

not allowed

M12

0,34

not allowed

0,68

not allowed

0,24

not allowed

0,34

not allowed

M16

0,70

not allowed

1,40

not allowed

0,50

not allowed

0,70

not allowed

M20

1,20

not allowed

2,40

not allowed

0,86

not allowed

1,20

not allowed

BOLTABLE LIFTING EYE FOR ALL LIFTING DIRECTIONS, GRADE 8

• • • • • •

grade 8 lifting in all positions delivered without bolts bolt grade must be min. 8.8 powder coated surface safety factor 4 : 1

WLL t 1,00 2,00 3,00 5,00 8,00

A

B

D

M

L

Weight

mm

mm

mm

mm

mm

kg

78,0 80,5 94,0 118,0 141,0

40,0 40,0 46,5 60,0 63,0

12,0 14,0 16,0 20,0 26,0

12,5 14,5 16,5 22,5 26,5

155 155,0 155,0 180,0 220,0

1,10 1,20 1,50 2,60 4,90

Product code

NS8PUL1 NS8PUL2 NS8PUL3 NS8PUL5 NS8PUL8

Bolt grade must be min. 8.8.

Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals Product group 09.indd 15

9 - 14 02.08.2016 09:40:50

9

CONTAINERS / CONCRETE ELEMENTS

CONTAINER LIFTING LUG

• grade 8 • three types • top lifting lugs for lifting

•

•

• • •

Top lugs / Top lugs Type

vertically from the upper part of the container with a lifting frame side lifting lugs for lifting from the lower corners of the container with max. 50 ° chain angle multiple lifting lugs for lifting from the upper or lower corner from the side (multiple lifting lugs do not lock like the other models!) delivery includes 4 lifting eyes (for all corners) without shackles paint coated safety factor 4 : 1

WLL vertical lift t

WLL 36° chain angle t

WLL 50° chain angle t

Weight / set 4 pc

56 40

40

32

19,2 19,2

Top lugs Top lugs

Product code

kg KONMKIIA KONMKVA

40 mm Ø 43 mm

KONMKIIA Top lugs

KONMKVA Top lugs

Multiple lugs Type

WLL vertical lift t

WLL 36° chain angle t

WLL 50° chain angle t

Weight / set 4 pc

50

50

-

16,2

Multiple lugs

Product code

kg KONNOSETTI

26 mm Ø 68 mm

LIFTING POINT FOR CONCRETE ELEMENTS

• four sizes • elastic wire rope eye combined

Thread

with special thread end

• galvanized • safety factor 4 : 1

M16

WLL WLL in 90° Lifting eye in vertical lifting length lift t t mm 1,5

1,5

140

L length

Weight

mm

kg

330

2,0

Product code

NSBER16

M20

2,0

2,0

140

330

2,0

NSBER20

M24 M30

2,5 3,0

2,5 3,0

140 140

330 400

2,4 2,6

NSBER24 NSBER30

L

9 - 15 Product group 09.indd 16

+48 91 418• 25 91 • office@forankra.pl Forankra Pol Oy Sp.•z T. o.o.

• Tel. • www.forankra.pl +358 2 511 5511 sales@haklift.com Haklift • www.haklift.com Lifting, lashing handling products for professionals Lifting, lashing and and material handling products for professionals 02.08.2016 09:40:52