20
INSTRUCTIONS
RATCHED LASHING INSTRUCTIONS
Operating instruction videos for locks, tightners and tools can be conveniently found at the Haklift Youtube-channel. Write Haklift to the search field.
Buckle SYL100 slide
Buckle SYL50 slide
Ratchet lashing SYKI800 1. Slide the strap to the lock by hand 2. Set the tightener as in image, approx. 50cm from the lock by opening latch “A” and move the tightener sideways on the strap, so that the strap is between latch “A” and tightener body. Close latch “A” by pressing it upwards. 3. Place the strap to the tightener by sliding it through loop “C” and tighten it by pulling towards arrow “B” 4. Tighten the bond by moving the tightener handle back and forth 5. When the bond is tightened, release the tightener by pulling from handle “D” and move the actual handle upwards simultaneously, so that it locks in the upper position. Now you can pull the strap from the tightener drum and loop, and by opening latch “A”, you can remove the tightener from the strap.
20 - 9 Product group 20.indd 10
Forankra Pol Sp. z o.o. • Tel. +48 91 418 25 91 • office@forankra.pl • www.forankra.pl Lifting, lashing and material handling products for professionals 02.08.2016 11:01:12