Yoke5 by Forankra

Offshore Lifting

DNV 2.7-1 TYPE APPROVAL Offshore Container Lifting Operation

Catalog No. 8-2018 Offshore

Offshore Lifting

Offshore Container Lifting Operation.

QMS System Certified:

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

The Features of YOKE Offshore Container Lifting Series

YOKE DATM Series are manufactured to meet the requirements of DNV 2.7-1 for offshore container lifting to fulfill the need for the critical requirements of charpy impact, strength and ductility.

Lower Temperature Demand YOKE DATM Series are designed to withstand impacts in extreme environments down to maximum -40° C.

-40°C

Higher Safety Factors YOKE DATM Shackles have a design factor of 6 for Grade 6 Shackles and a design factor of 8 for Grade 8 shackles, and YOKE DATM Master Link & Assembly have a design factor of 5 to enable them to operate in the harshest environments. DNV 2.7-1 Specified Test Certificate Test certificate with material and manufacturing process specified in DNV 2.7-1 for complete traceability.

To perform in the harshest weather and roughest sea conditions, YOKE DATM Series are specially designed, manufactured and tested for the operating in the offshore container industry.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

Certificate No: S-8059 File No: 911.53 Job Id: 262.1-016068-3

TYPE APPROVAL CERTIFICATE

This is to certify: That the Lifting set for Offshore containers and Portable Offshore Units with type designation(s) Bolt Pin Anchor Shackles - Type DA-808 - Design Temperature -40°C Bolt Pin Anchor Shackles - Type DA-838 - Design Temperature -40°C Issued to

Yoke Industrial Corp. Taichung, Taiwan

is found to comply with DNV 2.7-1 Offshore Containers (2013) DNVGL-ST-E273 Standard 2.7-3 Portable offshore units (2016) EN 12079-2 Offshore containers and associated lifting sets – Part 2: Lifting sets Design, manufacture and marking EN 13889 Forged steel shackles for general lifting purposes - Dee shackles and Bow shackles - Grade 6 - Safety IMO/MSC Circular 860

Application : Shackles for Lifting Sets for Offshore Containers and Portable Offshore Units

This Certificate is valid until 2019-06-30. 

Issued at Høvik on 2017-05-26 for DNV GL

DNV GL local station: Kaohsiung

Digitally Signed By: Hals, Inger-Helene

Signing Date: 30.05.2017

Approval Engineer: Igor Antonijevic

Location: Høvik, Norway

Inger-Helene Hals Head of Section

This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed. If any person suffers loss or damage which is proven to have been caused by any negligent act or omission of the Society, then the Society shall pay compensation to such person for his proven direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question. The maximum compensation shall never exceed USD 2 million. In this provision the “Society” shall mean DNV GL AS as well as all its direct and indirect owners, affiliates, subsidiaries, directors, officers, employees, agents and any other person or entity acting on behalf of DNV GL AS.

Form code: TA 1411a Revision: 2014-05 © DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.

www.dnvgl.com

Page 1 of 4

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

Determination of Working Load Limit Table 8-1 Determination of Working Load Limit Rating(kg)

Enhancement factor

500

1000

1500

2000

3.500

2500

2.880

3000

2.600

3500

2.403

4000

2.207

4500

2.067

5000

1.960

5500

1.873

6000

6500

7500

9000

1.567

1.543

10000

1.501

10500

1.479

11500

1.435

11000

1.457

12000

1.413

12500

1.931

13000

1.368

13500

1.346

14000

1.324

14500

1.302

15000

1.280

15500

1.267

16000

1.254

16500

1.240

17000

1.227

17500

1.214

18000

1.201

18500

1.188

19000

1.174

19500

1.161

20000

1.148

20500

1.143

21000

1.139

21500

1.135

22000

1.130

22500

1.126

23000

1.121

24000

1.112

23500

1.117

24500

1.108

25000

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

7.20

7.80

8.41

8.83

9.30

9.80

10.30

11.90

1.600

9500

7.00

1.700

1.633

8500

7.00

10.60

1.666

8000

7.00

1.766

1.733

7000

Mininum required Working Load Limit(WLLmin)(t)

1.104

11.26

12.50

13.07

13.60

14.10

14.57

15.01

15.53 16.02 16.50

16.95

17.38

17.79

18.18

18.54

18.88

19.20

19.64

20.06

20.47

20.86

21.24

21.61

21.97

22.31

22.64

22.96

23.44

23.92

24.39

24.86

25.33

25.79

26.25

26.70

27.15

27.59

P10

P11

P12

P13

Safety is our first priority

- Quality, Reliability, Innovation -

P14

P15

P16

P20

P22

P24

P25

P26

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

●●Forged B

alloy steel, quenched and tempered.

●●Tested

and manufactured in accordance with DNV 2.7-1, EN 1677-4, ASME B30.26.

●●Certified

by DNV 2.7-1.

●●Fatigue

rated to 20,000 cycles at 1.5 times the Working Load Limit

(WLL).

●●Charpy ●●Proof

tested in accordance with DNV 2.7-1.

Load tested to 2.5 times the Working Load Limit (WLL).

●●Design

factor 5:1.

●●Charpy

test of 42 joules (31ft. lbs.) at -40°C (-40°F) for normal section.

●●Charpy

test of 27 joules (20ft. lbs.) at -40°C (-40°F) for welded section.

-40°C

DA Master Link Item No. DA-001-13 DA-001-16 DA-001-19 DA-001-22 DA-001-223 DA-001-25 DA-001-251 DA-001-28 DA-001-32 DA-001-36 DA-001-40 DA-001-45 DA-001-50

Code NO. FD-13 FD-16 FD-19 FD-22 FD-223 FD-25 FD-251 FD-28 FD-32 FD-36 FD-40 FD-45 FD-50

DNV 2.7-1 (Offshore Containers-Lifting Appliance) WLL β 0-45° tonnes 2.8 4 6.7 8.9 6.3 11.5 11.5 13 17.1 24 28.1 38.3 45

Proof Load kN 69 98 164 218 142 282 282 319 417 588 688 938 1103

Proof Load kN 69 98 164 218 142 282 282 319 417 588 688 938 1103 69 98 164 218 319 355 588 688

"can be used to single hook according to DIN 15401 NO."

*Welded Master Link *Design Factor 5:1 *Proof tested at 2.5 times the WLL

DA-001-13 DA-001-16 DA-001-19 DA-001-22 DA-001-223 DA-001-25 DA-001-251 DA-001-28 DA-001-32 DA-001-36 DA-001-40 DA-001-45 DA-001-50

FD-13 FD-16 FD-19 FD-22 FD-223 FD-25 FD-251 FD-28 FD-32 FD-36 FD-40 FD-45 FD-50

WLL β 0-45° tonnes 2.8 4 6.7 8.9 6.3 11.5 11.5 13 17.1 24 28.1 38.3 45

DA-001-131 DA-001-161 DA-001-191 DA-001-222 DA-001-281 DA-001-282 DA-001-361 DA-001-401

FD-131 FD-161 FD-191 FD-222 FD-281 FD-282 FD-361 FD-401

2.8 4 6.7 8.9 13 14.5 24 28.1

Item No.

Code NO.

"can be used to single hook according to DIN 15401 NO." 2.5 6 6 8 16 10 16 16 16 20 20 25 32

Sub-links SPEC for DA-007. Items in grey area are not for sale individually.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

2.5 6 6 8 16 10 16 16 16 20 20 25 32

D 0.51 0.63 0.75 0.87 0.87 0.98 0.98 1.10 1.26 1.42 1.57 1.77 1.97

Dimensions (inch) A B 4.72 2.36 6.30 3.54 6.30 3.54 7.09 3.94 10.63 5.51 8.27 4.53 10.83 5.71 10.83 5.71 10.83 5.71 11.22 6.10 11.81 6.30 13.39 7.09 13.78 7.68

N.W. lbs 0.8 1.6 2.4 3.6 5.0 5.3 6.7 8.5 11.3 15.1 19.7 28.2 36.6

D 13 16 19 22 22 25 25 28 32 36 40 45 50

Dimensions (mm) A B 120 60 160 90 160 90 180 100 270 140 210 115 275 145 275 145 275 145 285 155 300 160 340 180 350 195

N.W. kg 0.4 0.7 1.1 1.6 2.3 2.4 3.1 3.9 5.1 6.9 8.9 12.8 16.6

13 16 19 22 28 28 36 40

90 140 140 162 190 200 275 260

50 70 70 90 100 110 145 130

●●Forged

alloy steel, quenched and tempered.

●●Tested

and manufactured in accordance with DNV 2.7-1, EN 1677-4, ASME B30.26.

●●Certified

●●Fatigue

by DNV 2.7-1.

rated to 20,000 cycles at 1.5 times the Working Load Limit

(WLL). ●●Charpy

Load tested to 2.5 times the Working Load Limit (WLL).

●●Proof

tested in accordance with DNV 2.7-1.

●●Design

factor 5:1.

●●Charpy

test of 42 joules (31ft. lbs.) at -40°C (-40°F) for normal

section. ●●Charpy

test of 27 joules (20ft. lbs.) at -40°C (-40°F) for welded

section.

-40°C

DA Master Link Assembly

Item No. DA-007-16 DA-007-22 DA-007-221 DA-007-25 DA-007-28 DA-007-281 DA-007-32 DA-007-36 DA-007-40 DA-007-45 DA-007-50

Assembled with. FD-161 FD-222 FD-223 FD-251 FD-28 FD-282 FD-32 FD-361 FD-40 FD-45 FD-50

+2 FD-131 +2 FD-191 +2 FD-161 +2 FD-19 +2 FD-22 +2 FD-223 +2 FD-25 +2 FD-281 +2 FD-32 +2 FD-36 +2 FD-401

WLL β 0-45° tonnes 4.1 8.9 6.3 8.9 12.9 14.5 17 23.6 28.1 38.3 45

DNV 2.7-1 (Offshore Containers-Lifting Appliance)

Proof Load kN

"can be used to single hook according to DIN 15401 NO."

100 218 154 218 316 355 417 578 688 938 1103

4 6 16 16 16 10 16 16 20 25 32

0.63 0.87 0.87 0.98 1.10 1.10 1.26 1.42 1.57 1.77 1.97

Dimensions (inch) A B d a

5.51 6.38 10.63 10.83 10.83 7.87 10.83 10.83 11.81 13.39 13.78

N.W. lbs

D 16

Dimensions (mm) A B d a 140 70 13 90

b 50

N.W. kg 1.2

2.76 3.54 5.51 5.71 5.71 4.33 5.71 5.71 6.30 7.09 7.68

0.51 3.54 1.97 0.75 5.51 2.76 0.63 5.51 2.76 0.75 6.30 3.54 0.87 7.09 3.94 0.87 5.51 2.76 0.98 8.27 4.53 1.10 7.48 3.94 1.26 10.83 5.71 1.42 11.22 6.10 1.57 10.24 5.12

2.7 7.4 7.9 11.5 15.7 12.2 22.0 26.9 42.4 58.4 71.1

*Welded Master Link *Design Factor 5:1

*Proof tested at 2.5 times the WLL

Item No. DA-007-16 DA-007-22 DA-007-221 DA-007-25 DA-007-28 DA-007-281 DA-007-32 DA-007-36 DA-007-40 DA-007-45 DA-007-50

Assembled with. FD-161 +2 FD131

FD-222 FD-223 FD-251 FD-28 FD-282 FD-32 FD-361 FD-40 FD-45 FD-50

+2 FD191 +2 FD161 +2 FD-19 +2 FD-22 +2 FD-223 +2 FD-25 +2 FD-281 +2 FD-32 +2 FD-36 +2 FD-401

WLL β 0-45° tonnes 4.1 8.9 6.3 8.9 12.9 14.5 17 23.6 28.1 38.3 45

Proof Load kN 100

"can be used to single hook according to DIN 15401 NO."

216 154 218 316 355 417 578 688 938 1103

6 16 16 16 10 16 16 20 25 32

22 22 25 28 28 32 36 40 45 50

162 270 275 275 200 275 275 300 340 350

90 140 145 145 110 145 145 160 180 195

19 16 19 22 22 25 28 32 36 40

140 140 160 180 140 210 190 275 285 260

70 70 90 100 70 115 100 145 155 130

3.3 3.6 5.2 7.1 5.5 10.0 12.2 19.2 26.5 32.3

*Welded Master Link *Design Factor 5:1

*Proof tested at 2.5 times the WLL

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

●●Forged

alloy steel, quenched and tempered.

●●Tested E

and manufactured in accordance with DNV 2.7-1, DNV GL-ST-0378, EN 13889, ASME B30.26, U.S. Fed. Spec. RR-C-271F Type IVA, Grade A, Class 3.

●●Certified ●●Fatigue

rated to 20,000 cycles at 1.5 times the Working Load Limit (WLL).

●●Charpy

●●Hot G

by DNV 2.7-1.

tested in accordance with DNV 2.7-1.

dip galvanized.

●●Charpy

test of 42 joules (31ft. lbs.) at -40°C (-40°F) for normal section.

-40°C

DA 838 Shackle Grade 6 Item No. DA-838-13 DA-838-16 DA-838-19 DA-838-22 DA-838-26 DA-838-28 DA-838-32 DA-838-36 DA-838-38 DA-838-45 DA-838-50 DA-838-64 DA-838-76 DA-838-89 DA-838-100

Nominal Size inch 1/2 5/8 3/4 7/8 1 1- 1/8 1- 1/4 1- 3/8 1- 1/2 1- 3/4 2 2- 1/2 3 3- 1/2 4

DNV 2.7-1

(Offshore Containers-Lifting Appliance)

Working Load Limit

tonnes* 2.00 3.25 4.75 6.50 8.50 9.50 12.00 13.50 17.00 25.00 35.00 ** 55.00 ** 85.00 **120.00 **150.00

A 1.85 2.40 2.83 3.39 3.78 4.37 4.76 5.28 5.57 7.00 7.76 10.51 12.99 14.65 14.49

B 0.52 0.63 0.75 0.87 1.02 1.10 1.26 1.42 1.50 1.85 2.09 2.62 2.99 3.62 4.09

D 0.63 0.75 0.87 1.02 1.10 1.26 1.42 1.50 1.77 2.00 2.24 2.76 3.25 3.76 4.25

Dimensions (inch) E 1.30 1.70 1.97 2.28 2.68 2.91 3.30 3.62 3.90 5.00 5.75 7.24 7.87 9.02 10.00

G 1.18 1.50 1.81 2.09 2.40 2.68 2.99 3.31 3.62 4.17 4.80 5.71 6.50 7.99 9.02

H 3.34 4.17 5.04 5.91 6.57 7.52 8.07 9.13 10.00 12.32 13.66 17.83 21.50 24.65 25.71

W 0.79 1.06 1.30 1.50 1.73 1.81 2.12 2.32 2.36 2.87 3.27 4.13 5.00 5.24 5.51

H 85 106 126 148 166 190 210 232 254 313 347 453 546 626 653

W 20 27 33 38 44 46 54 59 60 73 83 105 127 133 140

N.W.

lbs 0.9 1.5 2.2 3.7 5.3 7.5 10.6 14.3 19.4 38.5 53.2 95.7 178.2 264.0 336.6

*2t to 35t are type approved of DNV 2.7-1. Minimum Ultimate Load is 6 times the Working Load Limit. **55t to 150t meet all requirements of DNV 2.7-1. Minimum Ultimate Load is 6 times the Working Load Limit.

Item No. DA-838-13 DA-838-16 DA-838-19 DA-838-22 DA-838-26 DA-838-28 DA-838-32 DA-838-36 DA-838-38 DA-838-45 DA-838-50 DA-838-64 DA-838-76 DA-838-89 DA-838-100

Nominal Size mm 13 16 19 22 26 28 32 36 38 45 50 64 76 89 100

Working Load Limit

tonnes* 2.00 3.25 4.75 6.50 8.50 9.50 12.00 13.50 17.00 25.00 35.00 ** 55.00 ** 85.00 **120.00 **150.00

A 47 61 72 86 96 111 121 134 146 178 197 267 330 372 368

B 13 16 19 22 26 28 32 36 38 47 53 66.5 76 92 104

D 16 19 22 26 28 32 36 38 44 51 57 70 82.5 95.5 108

Dimensions (mm) E 33 43 50 58 68 74 84 92 99 127 146 184 200 229 254

G 30 38 46 53 61 68 76 84 92 106 122 145 165 203 229

N.W.

kg 0.4 0.7 1.0 1.7 2.4 3.4 4.8 6.5 8.8 17.5 24.2 43.5 81.0 120.0 153.0

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

●●Forged

alloy steel, quenched and tempered.

●●Tested

and manufactured in accordance with DNV 2.7-1, DNV GL-ST-0378, EN 13889, ASME B30.26, U.S. Fed. Spec. RR-C-271F Type IVA, Grade A, Class 3.

●●Certified ●●Fatigue

rated to 20,000 cycles at 1.5 times the Working Load Limit (WLL).

●●Charpy

D W

by DNV 2.7-1.

●●Hot

tested in accordance with DNV 2.7-1.

dip galvanized.

●●Charpy

test of 42 joules (31ft. lbs.) at -40°C (-40°F) for normal section.

-40°C

DA 808 Shackle Grade 8 Item No. DA-808-13 DA-808-16 DA-808-19 DA-808-22 DA-808-26 DA-808-28 DA-808-32 DA-808-36 DA-808-38 DA-808-45 DA-808-50 DA-808-64 DA-808-76 DA-808-89 DA-808-100

Nominal Size inch 1/2 5/8 3/4 7/8 1 1- 1/8 1- 1/4 1- 3/8 1- 1/2 1- 3/4 2 2- 1/2 3 3- 1/2 4

DNV 2.7-1

(Offshore Containers-Lifting Appliance) Working Load Limit

tonnes* 2.00 3.25 4.75 6.50 8.50 9.50 12.00 13.50 17.00 25.00 35.00 ** 85.00 **120.00 **150.00 **175.00

A 1.85 2.40 2.83 3.39 3.78 4.37 4.76 5.28 5.57 7.00 7.76 10.51 12.99 14.65 14.49

Dimensions (inch)

B 0.52 0.63 0.75 0.87 1.02 1.10 1.26 1.42 1.50 1.85 2.09 2.62 2.99 3.62 4.09

D 0.63 0.75 0.87 1.02 1.10 1.26 1.42 1.50 1.77 2.00 2.24 2.76 3.25 3.76 4.25

E 1.30 1.70 1.97 2.28 2.68 2.91 3.30 3.62 3.90 5.00 5.75 7.24 7.87 9.02 10.00

G 1.18 1.50 1.81 2.09 2.40 2.68 2.99 3.31 3.62 4.17 4.80 5.71 6.50 7.99 9.02

H 3.34 4.17 5.04 5.91 6.57 7.52 8.07 9.13 10.00 12.32 13.66 17.83 21.50 24.65 25.71

W 0.79 1.06 1.30 1.50 1.73 1.81 2.12 2.32 2.36 2.87 3.27 4.13 5.00 5.24 5.51

H 85 106 126 148 166 190 210 232 254 313 347 453 546 626 653

W 20 27 33 38 44 46 54 59 60 73 83 105 127 133 140

N.W.

lbs 0.9 1.5 2.2 3.7 5.3 7.5 10.6 14.3 19.4 38.5 53.2 95.7 178.2 264.0 336.6

*2t to 35t are type approved of DNV 2.7-1. Minimum Ultimate Load is 8 times the Working Load Limit. **85t to 175t meet all requirements of DNV 2.7-1. Minimum Ultimate Load is 5.4 times the Working Load Limit.

Item No. DA-808-13 DA-808-16 DA-808-19 DA-808-22 DA-808-26 DA-808-28 DA-808-32 DA-808-36 DA-808-38 DA-808-45 DA-808-50 DA-808-64 DA-808-76 DA-808-89 DA-808-100

Nominal Size mm 13 16 19 22 26 28 32 36 38 45 50 64 76 89 100

Working Load Limit

tonnes* 2.00 3.25 4.75 6.50 8.50 9.50 12.00 13.50 17.00 25.00 35.00 ** 85.00 **120.00 **150.00 **175.00

A 47 61 72 86 96 111 121 134 146 178 197 267 330 372 368

B 13 16 19 22 26 28 32 36 38 47 53 66.5 76 92 104

Dimensions (mm)

D 16 19 22 26 28 32 36 38 45 51 57 70 82.5 95.5 108

E 33 43 50 58 68 74 84 92 99 127 146 184 200 229 254

G 30 38 46 53 61 68 76 84 92 106 122 145 165 203 229

N.W.

kg 0.4 0.7 1.0 1.7 2.4 3.4 4.8 6.5 8.8 17.5 24.2 43.5 81.0 120.0 153.0

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

●●Forged

A D

alloy steel, quenched and tempered.

●●Tested

and manufactured in accordance with EN 1677 and Norsok R002.

●●Certified

●●Fatigue

rated to 20,000 cycles at 1.5 times the Working Load Limit (WLL).

●●Charpy

tested in accordance with DNV GL-ST-0378.

●●Designed

with recessed trigger and ball bearing, providing the locking mechanism being protected against inadvertent opening due to entanglement with any obstruction during lifting.

by DNV GL-ST-0378.

●●Design ●●Latch

factor 4:1 and 5:1.

mechanism is self locking under loading.

●●Charpy

test of 42 joules (31ft. lbs.) at -20°C (-4°F).

-40°C

DA Swivel Self Locking Hook

DNV GL-ST-0378 (Offshore Crane- Lifting Appliance)

With Ball Bearing, which performs full swivel under load

Item No.

DA-027N-13W DA-027N-16W DA-027N-20 DA-027N-22 DA-027N-26 DA-027N-32

Item No.

DA-027N-13W DA-027N-16W DA-027N-20 DA-027N-22 DA-027N-26 DA-027N-32

Working Load Limit tonnes 5:1 4:1 5.3 6.7 8 10 12.8 16 15.2 19 21.2 26.5 25.2 31.5 Working Load Limit tonnes 5:1 4:1 5.3 6.7 8 10 12.8 16 15.2 19 21.2 26.5 25.2 31.5

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

Dimensions (inch) H K

2.40 2.91 2.91 3.82 4.84 4.84

1.97 3.23 3.23 3.74 4.53 4.53

0.91 0.98 0.98 1.30 1.65 1.65

61 74 74 97 123 123

50 82 82 95 115 115

1.54 1.93 2.56 2.48 2.72 3.19

11.14 14.21 15.24 17.99 21.06 22.95

Dimensions (mm) H K

23 25 25 33 42 42

39 49 65 63 69 81

283 361 387 457 535 583

N.W. lbs

2.01 2.36 2.76 3.15 3.90 4.72

1.18 1.42 2.09 1.93 2.20 2.48

N.W. kg

30 36 53 49 56 63

5.0 6.0 13.0 20.0 32.7 38.5

51 60 70 80 99 120

11 13 29 44 72 85

●●Forged

alloy steel, quenched and tempered.

●●Tested

and manufactured in accordance with EN 1677 and Norsok R002.

●●Certified

rated to 20,000 cycles at 1.5 times the Working Load Limit (WLL).

●●Charpy

K P

by DNV GL-ST-0378.

●●Fatigue

tested in accordance with DNV GL-ST-0378.

●●Designed

with recessed trigger, providing the locking mechanism being protected against inadvertent opening due to entanglement with any obstruction during lifting.

●●Design ●●Latch

factor 4:1 and 5:1.

mechanism is self locking under loading.

●●Charpy

test of 42 joules (31ft. lbs.) at -20°C (-4°F).

-40°C

DNV GL-ST-0378

DA Eye Self Locking Hook

Item No.

DA-025-13 DA-025-16 DA-025-20 DA-025-22 DA-025-26 DA-025-32

Item No.

DA-025-13 DA-025-16 DA-025-20 DA-025-22 DA-025-26 DA-025-32

Working Load Limit tonnes 5:1 4:1 5.3 6.7 8.0 10.0 12.8 16.0 15.2 19.0 21.2 26.5 25.2 31.5 Working Load Limit tonnes 5:1 4:1 5.3 6.7 8.0 10.0 12.8 16.0 15.2 19.0 21.2 26.5 25.2 31.5

(Offshore Crane- Lifting Appliance)

A 1.57 1.97 2.36 2.76 3.15 3.54

D 0.63 0.83 0.91 0.94 0.98 1.10

40 50 60 70 80 90

16 21 23 24 25 28

Dimensions (inch) H K 1.54 1.93 2.56 2.48 2.72 3.19

8.15 9.92 11.42 12.56 13.50 15.79

Dimensions (mm) H K 39 49 65 63 69 81

207 252 290 319 343 401

N.W. lbs

2.01 2.36 2.76 3.15 3.90 4.72

1.18 1.42 2.09 1.93 2.20 2.48

6.6 12.8 22.0 27.5 33.0 57.3

N.W. kg

51 60 70 80 99 120

30 36 53 49 56 63

3.0 5.8 10.0 12.5 15.0 26.0

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

230° Pivot ●●Forged alloy steel, quenched and tempered. A

●●Tested

and manufactured in accordance with EN1677-1 and DNV GL-ST-0378 and ASME B30.26.

●●Certified

by DNV GL-ST-0378.

●●Fatigue

rated to 20,000 cycles at 1.5 times the Working Load Limit (WLL).

●●Charpy

tested in accordance with DNV GL-ST-0378.

E M

●●Proof

Load tested to 2.5 times the Working Load Limit (WLL).

360° Rotation

K G

●●Pivots

to 230°, rotates through 360° due to its unique ball bearing design.

●●Design

Certificate No: TAS00000T4

factor 4:1.

●●Easy

to attach or dismantle due to the forged hexagon shaped body of the DA Swivel Point.

This is to certify: That the Chain, shackles, swivels, sockets with type designation(s) Lifting points DA-271 for offshore cranes Issued to

Yoke Industrial Corp.

Taichung, Taiwan

●●Maximum

WLL in axial direction when load ring is aligned.

is found to comply with DNV GL standard DNVGL-ST-0378 – Standard for offshore and platform lifting appliances

Application : Product(s) approved by this certificate is/are accepted for installation on all vessels classed by DNV GL.

DNV GL local station: Kaohsiung Approval Engineer: Antonio Sendin Alvarez

Load direction

This Certificate is valid until 2022-05-29. 

Issued at Høvik on 2017-05-30

●●Capable

of rotating under load. Do not turn continuously in 90 degree direction at full load.

for DNV GL Digitally Signed By: aldo.matteucci@dnvgl.com Location: DNV GL Høvik, Norway Signing Date: 31.05.2017

Aldo Matteucci Head of Section

Manually adjusted -increased WLL( )-Values

-40°C

Vertical load -straight pull[ ]-Values

Form code: TA 1411a Revision: 2015-05 © DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.

www.dnvgl.com

Page 1 of 4

DNV GL-ST-0378

DA Swivel Point

(Offshore Crane- Lifting Appliance)

Metric Thread (DA-271)

With Ball Bearing, which performs full swivel under load

Item No.

DA-271-003 DA-271-004 DA-271-006 DA-271-013 DA-271-020 DA-271-035 DA-271-060 DA-271-080 DA-271-120 DA-271-130 DA-271-140 DA-271-160 DA-271-161

Working Load Limit (y) [z] tonnes 0.4 0.6 0.6 0.9 0.7 1.2 1.5 2.6 2.5 4 4 7 6 10 10 15 13 17 16 18 20 25 22 28 22 28

Thread version M E Pitch mm mm DIN13 M 8 12 1.25 M 10 15 1.5 M 12 18 1.75 M 16 24 2 M 20 30 2.5 M 24 36 3 M 30 45 3.5 M 36 54 4 M 42 63 4.5 M 48 72 5 M 52 78 5 M 56 84 5.5 M 64 96 6

35 35 40 46 62 78 90 90 98 98 120 120 120

40 40 45 54 68 88 120 120 122 122 150 150 150

Dimensions (mm) K F D mm 30 72 8 30 72 8 36 95 10 41 104 13 55 122 13 70 154 19 80 206 22 80 206 22 84 235 25 84 235 25 94 270 32 94 270 32 94 270 32

32 32 50 50 54 66 86 86 110 110 120 120 120

29 29 35 38 38 40 50 50 65 65 70 70 70

Torque in Nm 10 - 40 10 - 40 15 - 40 45 - 130 100 - 170 190 - 280 270 - 600 270 - 600 350 - 800 350 - 800 350 - 900 350 - 900 500 - 1000

N.W. kg 0.2 0.2 0.3 0.5 1.0 2.2 4.5 4.6 5.5 6.1 10.5 10.7 11.6

*Design factor 4:1 proof tested and certiﬁed.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

-40°C

Kind of attachment Number of legs Load direction Item No. DA-271-003 DA-271-004 DA-271-006 DA-271-013 DA-271-020 DA-271-035 DA-271-060 DA-271-080 DA-271-120 DA-271-130 DA-271-140 DA-271-160 DA-271-161

Thread M 8 M10 M12 M16 M20 M24 M30 M36 M42 M48 M52 M56 M64

1 0°

2 0°

1 90°

2 90°

0.6 0.9 1.2 2.6 4 7 10 15 17 18 25 28 28

1.2 1.8 2.4 5.2 8 14 20 30 34 36 50 56 56

0.4 0.6 0.7 1.5 2.5 4 6 10 13 14 20 20 20

0.8 1.2 1.5 3 5 8 12 20 26 28 40 40 40

2 0-45° WLL(t) 0.4 0.6 0.8 1.8 2.8 4.9 7 14 18.2 19.6 28 28 28

2 2 45°- 60° unsymm. 0.3 0.4 0.6 1.3 2 3.5 5 10 13 14 20 20 20

0.3 0.4 0.6 1.3 2 3.5 5 10 13 14 20 20 20

3-4 0 - 45°

3-4 45°- 60°

3-4 unsymm.

0.6 0.9 1.2 2.7 4.2 7.3 10.5 21 27.3 29.4 42 42 42

0.4 0.6 0.9 1.9 3 5.2 7.5 15 19.5 21 30 30 30

0.3 0.4 0.6 1.3 2 3.5 5 10 13 14 20 20 20

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

230° Pivot B

●●Forged

alloy steel, quenched and tempered.

●●Tested

and manufactured in accordance with EN1677-1 and DNV GL-ST-0378 and ASME B30.26.

●●Fatigue

rated to 20,000 cycles at 1.5 times the Working Load Limit (WLL).

●●Charpy

tested in accordance with DNV GL-ST-0378 .

E M

●●Proof

Load tested to 2.5 times the Working Load Limit (WLL).

K G

●●Pivots

to 230°, rotates through 360° due to its unique ball bearing design.

360° Rotation

●●Design

factor 4:1.

●●Easy

to attach or dismantle due to the forged hexagon shaped body of the DA Swivel Point.

●●Maximum

WLL in axial direction when load ring is aligned.

●●Capable

of rotating under load. Do not turn continuously in 90 degree direction at full load.

Load direction y

-40°C

Manually adjusted -increased WLL( )-Values

Vertical load -straight pull[ ]-Values

DA Swivel Point UNC Thread (DA-272)

With Ball Bearing, which performs full swivel under load

Item No.

DA-272-006 DA-272-013 DA-272-018 DA-272-020 DA-272-035 DA-272-060 DA-272-080 DA-272-120 DA-272-130 DA-272-140 DA-272-160

Working Load Limit (y) [z] tonnes 0.7 1.2 1.5 2.6 2.0 3.6 2.5 4 4 7 6 10 10 15 13 17 16 18 20 25 22 28

Thread version M E TPI inch inch 1/2 0.75 13UNC 5/8 0.94 11UNC 3/4 1.13 10UNC 7/8 1.31 9UNC 1 1.50 8UNC 1 1/4 1.88 7UNC 1 1/2 2.25 6UNC 1 3/4 2.63 5UNC 2 3.00 4.5UNC 2 1/4 3.38 4.5UNC 2 1/2 3.75 4UNC

1.57 1.81 1.81 2.44 3.07 3.54 3.54 3.86 3.86 4.72 4.72

1.77 2.13 2.68 2.68 3.46 4.72 4.72 4.80 4.80 5.91 5.91

Dimensions (inch) K F D inch 1.42 3.74 0.39 1.61 4.09 0.51 1.61 4.09 0.51 2.17 4.80 0.51 2.76 6.06 0.75 3.15 8.11 0.87 3.15 8.11 0.87 3.31 9.25 0.98 3.31 9.25 0.98 3.70 10.63 1.26 3.70 10.63 1.26

1.97 1.97 1.97 2.13 2.60 3.39 3.39 4.33 4.33 4.72 4.72

1.38 1.50 1.50 1.50 1.57 1.97 1.97 2.56 2.56 2.76 2.76

Torque in Nm 15 - 40 45 - 130 45 - 130 100 - 170 190 - 280 270 - 600 270 - 600 350 - 800 350 - 800 350 - 900 350 - 900

N.W. lbs 0.7 1.2 1.2 2.2 4.8 9.9 10.0 12.1 13.5 23.1 23.5

*Design factor 4:1 proof tested and certiﬁed.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

-40°C

Kind of attachment Number of legs Load direction Item No. Thread DA-272-006 1/2 DA-272-013 5/8 DA-272-018 3/4 DA-272-020 7/8 DA-272-035 1 DA-272-060 1 1/4 DA-272-080 1 1/2 DA-272-120 1 3/4 DA-272-130 2 DA-272-140 2 1/4 DA-272-160 2 1/2

1 0°

2 0°

1 90°

2 90°

1.2 2.6 3.6 4 7 10 15 17 18 25 28

2.4 5.2 7.2 8 14 20 30 34 36 50 56

0.7 1.5 2 2.5 4 6 10 13 14 20 20

1.5 3 4 5 8 12 20 26 28 40 40

2 0-45° WLL(t) 0.8 1.8 2.5 2.8 4.9 7 14 18.2 19.6 28 28

2 45°- 60°

2 unsymm.

0.6 1.3 1.8 2 3.5 5 10 13 14 20 20

3-4 0 - 45° 1.2 2.7 3.7 4.2 7.3 10.5 21 27.3 29.4 42 42

3-4 45°- 60°

3-4 unsymm.

0.9 1.9 2.7 3 5.2 7.5 15 19.5 21 30 30

0.6 1.3 1.8 2 3.5 5 10 13 14 20 20

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

●●Forged

alloy steel, quenched and tempered.

●●Designed

application.

●●Handles

specif ic ally for ROV

are Carbon Steel.

●●I n di v i d u a l l y

st a m p e d w i t h t h e Working Load Limit.

●●Shackle

Bows are painted yellow to ensure ease of sight in water.

●●C o n v e r t i b l e

shackle bolts.

handles on ROV

ROV Anchor Shackle

with Fishtail-handle and Safety Pin (ROV: Remotely Operated Vehicle)

Item No. 8-941-22 8-941-26 8-941-28 8-941-32 8-941-36 8-941-38 8-941-45 8-941-50

Nominal Size in. 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2

Working Load Limit tonnes 6.5 8.5 9.5 12.0 13.5 17.0 25.0 35.0

A 0.9 1.0 1.1 1.3 1.4 1.5 1.8 2.0

B 1.0 1.1 1.3 1.4 1.5 1.8 2.0 2.2

Dimensions (inch) D E G 0.8 1.5 2.3 0.9 1.7 2.7 1.1 1.8 2.9 1.2 2.1 3.3 1.3 2.3 3.6 1.4 2.4 3.8 1.7 2.9 5.0 2.0 3.3 5.7

C 2.1 2.4 2.7 3.0 3.3 3.6 4.2 4.8

H 5.8 6.5 7.5 8.3 9.1 10.0 12.3 13.7

I 16.5 16.9 17.9 18.4 18.8 19.3 21.1 22.0

J 4.0 4.7 5.1 5.8 6.5 6.9 8.7 9.8

N.W. lbs 9.3 10.6 12.5 15.8 18.9 23.5 38.7 58.1

I 420 429 454 467 477 489 536 560

J 102 120 130 148 164 175 221 247.7

N.W. kg 4.2 4.8 5.7 7.2 8.6 10.7 17.6 26.4

* Minimum Ultimate Load is 5 times the Working Load Limit. Maximum Proof Load is 2 times the Working Load Limit.

Item No. 8-941-22 8-941-26 8-941-28 8-941-32 8-941-36 8-941-38 8-941-45 8-941-50

Nominal Size mm 22 26 28 32 36 38 45 50

Working Load Limit tonnes 6.5 8.5 9.5 12.0 13.5 17.0 25.0 35.0

A 22 26 28 32 36 38 45 50

B 26 28 32 36 38 45 50 57

C 53 61 68 76 84 92 106 122

Dimensions (mm) D E G 21.5 38 58 23 44 68 27 46 74 29.5 54 84 32 59 92 35 60.5 97 44 73 127 50.8 83.5 146

H 148 166 190 210 232 254 313 347.5

* Minimum Ultimate Load is 5 times the Working Load Limit. Maximum Proof Load is 2 times the Working Load Limit.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

●●C a r b o n

Steel, quenched and tempered.

●●Designed O

application.

specif ic ally for ROV

●●C o n v e r t i b l e

shackle bolts.

handles on ROV

ROV Anchor Shackle Fishtail-handle Item No. 8-941FT-22 8-941FT-26 8-941FT-28 8-941FT-32 8-941FT-36 8-941FT-38 8-941FT-45 8-941FT-50

Item No. 8-941FT-22 8-941FT-26 8-941FT-28 8-941FT-32 8-941FT-36 8-941FT-38 8-941FT-45 8-941FT-50

Working Load Limit tonnes 6.5 8.5 9.5 12.0 13.5 17.0 25.0 35.0

B 1.02 1.10 1.26 1.42 1.50 1.77 1.97 2.24

Dimensions (inch) I 16.54 16.89 17.87 18.39 18.78 19.25 21.10 22.05

O 7.09 7.09 7.09 7.09 7.09 7.09 7.09 7.09

N.W. lbs 5.9 6.4 7.0 7.7 8.4 9.7 12.3 15.2

Working Load Limit tonnes 6.5 8.5 9.5 12.0 13.5 17.0 25.0 35.0

B 26 28 32 36 38 45 50 57

Dimensions (mm) I 420 429 454 467 477 489 536 560

O 180 180 180 180 180 180 180 180

N.W. kg 2.7 2.9 3.2 3.5 3.8 4.4 5.6 6.9

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

●●Forged

alloy steel, quenched and tempered.

●●D e s i g n e d

application.

●●Handles

specif ically for ROV

are Carbon Steel.

●●Individually

Load Limit.

stamped with the Working

●●Shackle

Bows are painted yellow to ensure ease of sight in water.

●●Convertible

bolts.

handles on ROV shackle

ROV Anchor Shackle

with D-handle and Safety Pin (ROV: Remotely Operated Vehicle) Item No. 8-951-22 8-951-26 8-951-28 8-951-32 8-951-36 8-951-38 8-951-45 8-951-50

Nominal Size inch 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2 1-3/4 2

Working Load Limit tonnes 6.5 8.5 9.5 12.0 13.5 17.0 25.0 35.0

A 0.9 1.0 1.1 1.3 1.4 1.5 1.8 2.0

B 1.0 1.1 1.3 1.4 1.5 1.8 2.0 2.2

C 2.1 2.4 2.7 3.0 3.3 3.6 4.2 4.8

Dimensions (inch) D E G 0.8 1.5 2.3 0.9 1.7 2.7 1.1 1.8 2.9 1.2 2.1 3.3 1.3 2.3 3.6 1.4 2.4 3.8 1.7 2.9 5.0 2.0 3.3 5.7

H 5.8 6.5 7.5 8.3 9.1 10.0 12.3 13.7

I 13.6 14.0 15.0 15.5 15.9 16.3 18.2 19.1

C 53 61 68 76 84 92 106 122

Dimensions (mm) D E G 21.5 38 58 23 44 68 27 46 74 29.5 54 84 32 59 92 35 60.5 97 44 73 127 50.8 83.5 146

H 148 166 190 210 232 254 313 347.5

I 346 355 380 393 403 415 462 486

J 4.0 4.7 5.1 5.8 6.5 6.9 8.7 9.8

N.W. lbs 9.9 11.2 13.2 16.5 19.6 24.2 39.4 58.7

J 102 120 130 148 164 175 221 247.7

N.W. kg 4.5 5.1 6.0 7.5 8.9 11.0 17.9 26.7

* Minimum Ultimate Load is 5 times the Working Load Limit. Maximum Proof Load is 2 times the Working Load Limit.

Item No. 8-951-22 8-951-26 8-951-28 8-951-32 8-951-36 8-951-38 8-951-45 8-951-50

Nominal Size mm 22 26 28 32 36 38 45 50

Working Load Limit tonnes 6.5 8.5 9.5 12.0 13.5 17.0 25.0 35.0

A 22 26 28 32 36 38 45 50

B 26 28 32 36 38 45 50 57

* Minimum Ultimate Load is 5 times the Working Load Limit. Maximum Proof Load is 2 times the Working Load Limit.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

●●C a r b o n

Steel, quenched and tempered.

●●Designed

application.

specif ic ally for ROV

●●C o n v e r t i b l e

shackle bolts.

handles on ROV

ROV Anchor Shackle D-handle

Item No. 8-951DH-22 8-951DH-26 8-951DH-28 8-951DH-32 8-951DH-36 8-951DH-38 8-951DH-45 8-951DH-50

Working Load Limit tonnes 6.5 8.5 9.5 12.0 13.5 17.0 25.0 35.0

B 1.02 1.10 1.26 1.42 1.50 1.77 1.97 2.24

Dimensions (inch) I 16.54 16.89 17.87 18.39 18.78 19.25 21.10 22.05

O 5.71 5.71 5.71 5.71 5.71 5.71 5.71 5.71

N.W. lbs 5.1 5.5 6.4 6.8 7.5 9.0 11.7 14.3

Working Load Limit tonnes 6.5 8.5 9.5 12.0 13.5 17.0 25.0 35.0

B 26 28 32 36 38 45 50 57

Dimensions (mm) I 420 429 454 467 477 489 536 560

O 145 145 145 145 145 145 145 145

N.W. kg 2.3 2.5 2.9 3.1 3.4 4.1 5.3 6.5

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

ROV: Remotely Operated Vehicle

●●Forged

alloy steel, quenched and tempered.

●●Designed

Limit.

specifically for ROV application.

●●Individually

stamped with the Working Load

●●Shackle

Bows are painted yellow to ensure ease of sight in water.

ROV Anchor Shackle

with Safety Pin (ROV: Remotely Operated Vehicle)

Item No. 8-911-22 8-911-26 8-911-28 8-911-32 8-911-36 8-911-38 8-911-45 8-911-50

Nominal Size inch 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2

Working Load Limit mm 22 26 28 32 36 38 45 50

tonnes* 6.5 8.5 9.5 12.0 13.5 17.0 25.0 35.0

Dimensions (inch) A 3.39 3.78 4.37 4.76 5.28 5.75 7.00 7.76

E 2.28 2.68 2.91 3.30 3.62 3.90 5.00 5.75

H 5.91 6.57 7.52 8.07 9.13 10.00 12.32 13.66

O 1.96 1.96 2.75 2.75 2.95 2.95 3.54 4.17

P 2.48 2.55 3.46 3.46 3.77 3.85 4.48 5.19

Q 1.18 1.18 1.38 1.38 1.57 1.57 1.97 2.36

N.W. S 0.74 0.78 0.82 0.98 1.06 1.06 1.18 1.18

T 0.39 0.39 0.47 0.47 0.59 0.59 0.78 0.78

W 1.50 1.73 1.81 2.12 2.32 2.36 2.87 3.27

lbs 4.0 5.5 7.9 10.6 15.0 18.3 36.5 51.5

★ Minimum Ultimate Load is 5 times the Working Load Limit. Maximum Proof Load is 2 times the Working Load Limit.

Item No. 8-911-22 8-911-26 8-911-28 8-911-32 8-911-36 8-911-38 8-911-45 8-911-50

Nominal Size inch 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2

Working Load Limit mm 22 26 28 32 36 38 45 50

tonnes* 6.5 8.5 9.5 12.0 13.5 17.0 25.0 35.0

Dimensions (mm) A 86 96 111 121 134 146 178 197

E 58 69 74 84 92 99 127 146

H 148 166 190 210 232 254 313 347

O 50 50 70 70 75 75 90 106

P 63 65 88 88 96 98 114 132

Q 30 30 35 35 40 40 50 60

N.W. S 19 20 21 25 27 27 30 30

T 10 10 12 12 15 15 20 20

W 38 44 46 54 59 60 73 83

kg 1.8 2.5 3.6 4.8 6.8 8.3 16.6 23.4

★ Minimum Ultimate Load is 5 times the Working Load Limit. Maximum Proof Load is 2 times the Working Load Limit.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

ROV: Remotely Operated Vehicle

●●Forged

alloy steel, quenched and tempered.

●●Designed

specifically for ROV application.

●●Individually

Limit.

stamped with the Working Load

●●Shackle

Bows are painted yellow to ensure ease of sight in water.

P E

D T

ROV Eye Sling Hook

(ROV: Remotely Operated Vehicle)

Item No.

Working Load Limit

8-921-03 8-921-05 8-921-07 8-921-11 8-921-15 8-921-22 8-921-30

tonnes* 3.0 5.0 7.0 11.0 15.0 22.0 30.0

Dimensions (inch) A 1.26 1.57 2.00 2.44 2.84 3.54 3.54

D 0.98 1.22 1.54 2.24 2.44 3.19 3.27

d 0.59 0.71 0.95 1.10 1.26 1.57 1.77

E 0.78 0.78 0.78 1.18 1.18 1.96 1.96

H 1.14 1.46 1.82 2.28 2.60 3.01 3.62

K 4.80 5.87 7.56 9.13 10.10 12.50 14.10

N.W. P 0.98 1.22 1.54 2.24 2.44 3.19 3.27

R 0.31 0.31 0.31 0.31 0.31 0.39 0.39

T 0.95 1.22 1.46 1.89 2.20 2.68 2.99

lbs 2.2 4.6 8.8 15.4 20.7 40.9 68.6

★ Minimum Ultimate Load is 4 times the Working Load Limit. Maximum Proof Load is 2 times the Working Load Limit.

Item No.

Working Load Limit

8-921-03 8-921-05 8-921-07 8-921-11 8-921-15 8-921-22 8-921-30

tonnes 3.0 5.0 7.0 11.0 15.0 22.0 30.0

Dimensions (mm) A 32 40 51 62 72 90 90

D 25 31 39 57 62 81 83

d 15 18 24 28 32 40 45

E 20 20 20 30 30 50 50

H 29 37 46 58 66 77 92

K 122 149 192 232 256 318 357

N.W. P 25 31 39 57 62 81 83

R 8 8 8 8 8 10 10

T 24 31 37 48 56 68 76

kg 1.0 2.1 4.0 7.0 9.4 18.6 31.2

★ Minimum Ultimate Load is 4 times the Working Load Limit. Maximum Proof Load is 2 times the Working Load Limit.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

ROV: Remotely Operated Vehicle

●●Forged

alloy steel, quenched and tempered.

●●Designed

specifically for ROV application.

●●Individually

Limit.

●●Shackle

Bows are painted yellow to ensure ease of sight in water.

stamped with the Working Load

H T G

ROV Shank Hook

(ROV: Remotely Operated Vehicle)

Item No.

Working Load Limit

8-931-05 8-931-08 8-931-11 8-931-16 8-931-22 8-931-32

tonnes* 5.4 8.0 11.5 16.0 22.0 31.5

Dimensions (inch) A 2.16 2.16 2.56 2.56 3.35 3.35

C 1.53 1.94 2.46 2.59 2.81 3.44

E 0.78 0.78 1.18 1.18 1.96 1.96

G 5.12 6.54 7.72 8.70 10.91 13.90

H 1.46 1.82 2.28 2.60 3.01 3.62

L 15.90 16.81 22.40 23.07 26.96 28.66

N 1.10 1.10 1.57 1.57 2.04 2.04

N.W. P 1.26 1.54 2.24 2.44 3.19 3.46

Q 1.25 1.25 1.96 1.96 2.55 2.55

R 0.31 0.31 0.31 0.31 0.39 0.39

T 1.31 1.66 1.88 2.19 2.69 3.00

P 32 39 57 62 81 88

Q 32 32 50 50 65 65

R 8 8 8 8 10 10

T 33 42 48 56 68 76

lbs 13.2 16.7 30.6 35.0 68.2 98.1

★ Minimum Ultimate Load is 4 times the Working Load Limit. Maximum Proof Load is 2 times the Working Load Limit.

Item No.

Working Load Limit

8-931-05 8-931-08 8-931-11 8-931-16 8-931-22 8-931-32

tonnes* 5.4 8.0 11.5 16.0 22.0 31.5

Dimensions (mm) A 55 55 65 65 85 85

C 38 49 62 65 71 87

E 20 20 30 30 50 50

G 130 166 196 221 277 353

H 37 46 58 66 77 92

L 404 427 569 586 685 728

N 28 28 40 40 52 52

N.W. kg 6.0 7.6 13.9 15.9 31.0 44.6

★ Minimum Ultimate Load is 4 times the Working Load Limit. Maximum Proof Load is 2 times the Working Load Limit.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

Offshore Lifting

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

An ISO 9001 Registered Company

YOKE INDUSTRIAL CORP. No. 39, 33rd Road, Taichung Industrial Park, Taichung 407, TAIWAN Tel: +886-4-2350-8088 Fax: +886-4-2350-1001 E-mail: info@mail.yoke.net

www.yoke.net

QMS System Certified: