Yoke6 by Forankra

100

Catalog No. 8-2018 Extreme-100

100

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

Worldwide Quality Type Approval And Certificate:

http://www.yoke.net/thirdpartycertificate

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

Quality Control, Testing, and Detecting during manufacturing YOKE runs a constant and strict production facility with quality control in every manufacturing stage from raw materials to the completed product. YOKE is an ISO 9001 certified company and has Type Approval by the major international authorities from SABS, ZU, ABS, API, and DNV. YOKE has achieved CNLA certification - Chinese National Laboratory Accreditation which ensures a quality research and development (R&D) department and unsurpassed product engineering.

■ Magnaflux Crack Detection: All forged components, each individually magnaflux detected after heat treatment.

■ Proof Load Testing: Chain and components are proof load tested at 2.5 times the Working Load Limits with resultant permanent deformation within 1%.

■ Dynamic Fatigue Testing: Batch samples of chain and components are Dynamic Fatigue Tested at 1.5 times Working Load Limit for 20,000 cycles.

■ Ultimate Breaking Load Testing: Batch samples are Break Load Tested in a static tensile testing machine to ultimate failure. The minimum ultimate force is equal to the Working Load Limit times the safety factor.

■ Spectrographic Analysis: To assure of the proper metallurgy content of all raw materials.

■ Eddy Current Detection: All load pins are 100% individually inspected after heat treatment.

Test certificate

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

DANGER: Overhead lifting presents a very real danger of severe injury or loss of life if lifting equipment is not used properly.Please read and understand all of these instructions prior to using any lifting sling or sling assembly. Sling should only be used by qualified persons who are responsible for the sling selection, inspection and use.

Grade 100 Chain Sling Components WORKING LOAD LIMITS IN TONNES acc. to PAS 1061

Load Factor

For Chain Size mm

tonnes

6 7 8 10 13 16 20 22 26 32

1.4 1.9 2.5 4.0 6.7 10.0 16.0 19.0 26.5 40.0

1.4 β 0 - 45° α 0 - 90° 2.0 2.7 3.5 5.6 9.4 14.0 22.4 26.5 37.1 56.0

1 45° - 60° 90° - 120°

2.1 β 0 - 45° α 0 - 90°

1.4 1.9 2.5 4.0 6.7 10.0 16.0 19.0 26.5 40.0

2.9 4.0 5.3 8.4 14.1 21.0 33.6 39.9 55.7 84.0

1.5 45° - 60° 90° - 120° 2.1 2.9 3.8 6.0 10.1 15.0 24.0 28.5 39.8 60.0

1.6

2.2 3.0 4.0 6.4 10.7 16.0 25.6 30.4 42.4 64.0

**Safety factor 4:1 above limits are valid for standard use and equally loaded slings. Properly use and maintaince of your YOKE chain slings will give long life and enable you to carry out your lifting operations efficiently and safely.

Warning: Never exceed a vertical sling angle of 60°

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

SAFE USE ●● Never

load in excess of the rated capacity for the application.

●● Keep

a record of all slings in use.

●● User

should remove all twists from a chain leg before lifting and, should never knot a chain.

●● Always

use YOKE shortening hook or clutch when chain slings should be shortened.

●● Always

inspect to insure that chain is free from damage or wear before use.

●● Always

inspect all sling components prior to each use.

●● Ensure

that chain is protected from any sharp corners on the load.

●● Ensure

that the master link articulates freely on the hook of the crane or other lifting appliance.

●● Never

tip load hooks. The load should always be supported correctly in the bowl of the hook.

●● Always

use the correct size sling for the load, allowing for the included angle and the possibility of unequal loading.

●● Personnel

must keep all body parts from between the sling and the load, and from between the sling and the crane/ hoist hook. Persons shall never ride the chain sling/rope sling or web sling or the load during lifting or while suspended. Persons must stand clear of all loads while lifting or while suspended. During lifting, with or without the load, personnel must be alert for possible snagging of the load or the chain sling.

MAINTENANCE ●● A

thorough examination should be carried out by a competent person at intervals at least every year or more frequently according to statutory regulations, type of use and past records.

●● Chains

with bent links or with cracks or gouges in the link should be replaced , as should deformed components such as bent master links , deformed hooks and any fittings showing signs of damage.

●● Chain

and components wear should never exceed 10%of the original dimensions.

●● Once

a chain sling has been overloaded it must be taken out of service.

●● Store

chain slings on a properly designed rack. They should not be left lying on the floor where they may suffer mechanical or corrosion damage or may be lost.

LIMITATION ON USE ●●YOKE

alloy chain or chain slings should not be used in acid or caustic solutions nor in heavily acidic or caustic laden atmospheres. The high tensile strength of the heat treated alloy material in alloy steel chains and components is susceptible to hydrogen embrittlement when exposed to acids.

●●YOKE

slings must not be heat-treated, galvanized, plated, coated or subject to any process involving heating or pickling. Each of these processes can have dangerous effects and will invalidate the manufacturer certificate.

●●YOKE

slings may be used at temperatures between -40°C to 200°C with no reduction in the working load limit . The use of YOKE chain slings within the permissible temperature range in the table below does not require any permanent reduction in working load limit when the chain sling is returned to normal temperatures. A sling accidentally exposed to temperatures in excess of the maximum permissible should be withdrawn form service immediately and returned to the distributor for thorough examination.

●●When

using YOKE slings in exceptionally hazardous conditions, the degree of hazard should be assessed by a competent person and the Working Load Limit adjusted accordingly. Examples are Sling temperature (F) Sling temperature (C) Reduction in Working Load Limit lifting of potentially dangerous loads such -40℉ to 400℉ -40℃ to 200℃ None as molten metals, corrosive materials or 400℉ to 550℉ 200℃ to 300℃ 10% fis s il e mater ial an d in c ludin g c er t ain 550℉ to 750℉ 300℃ to 400℃ 25% offshore activities. Above 750℉

Above 400℃

Do not use.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

Examples Of Chain Slings

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

Examples Of Wire Rope Sling & Web Sling

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

Incorrect Use

>120›

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel.

••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with ASTM A906/A906M, ASTM A952/A952M, ASME B30.9, ASME B30.26, EN 1677-4 and OSHA 1910.184, DIN PAS1061. ••Certified by DGUV GS-OA-15-05. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 5:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature at a minimum of 400°C. ••Welded Master Link designed for 1-2 legs Chain, Wire Rope and Webbing Slings. ••Each link is marked with batch number that links to the test certificate with full tracebility to raw materials.

X-001 Welded Master Link Item No.

Code No.

X-001-13 X-001-16 X-001-19 X-001-22 X-001-25 X-001-251 X-001-28 X-001-281 X-001-32 X-001-36 X-001-40 X-001-45 X-001-50 ★★ X-001-60 ★★ X-001-70 ★★ X-001-90

AD-13 AD-16 AD-19 AD-22 AD-25 AD-251 AD-28 AD-281 AD-32 AD-36 AD-40 AD-45 AD-50 AD-60 AD-70 AD-90

For Grade 100 Chain (mm) 1-leg 2-leg 6,7,8 6 10 7,8 13 10 13 10 16 13 16 13 16 13 16 13 20 16 26 22 26 22 26 26 32 26 -

WLL β 0-45° tonnes 2.8 4 6.7 8.9 11.5 11.5 13 13 17.1 24 28.1 38.3 45 65 85 150

Proof Load kN 69 98 164 208 282 282 319 319 417 588 688 938 1103 1593 2083 3675

Used to single hook according to DIN 15401 No. 2.5 6 6 8 10 16 16 8 16 20 20 25 32 32 50 50

Dimensions (mm)

D 13 16 19 22 25 25 28 28 32 36 40 45 50 60 70 90

A 120 160 160 180 210 275 275 190 275 285 300 340 350 430 480 500

16 36 40 60 70

140 275 260 410 400

B 60 90 90 100 115 145 145 100 145 155 160 180 195 230 260 300

N.W. kg 0.4 0.7 1.1 1.6 2.4 3.1 3.9 2.8 5.1 6.9 8.9 12.8 16.6 29.1 44.6 81.1

Sub-links SPEC for X-007.Items in grey area are not for sale individually. X-001-161 X-001-361 X-001-401 ★★ X-001-601 ★★ X-001-701

AD-161 AD-361 AD-401 AD-601 AD-701

10 22 26 32 -

7,8 20 22 32 -

4 24 28.1 65 85

98 588 688 1593 2083

70 145 130 220 200

0.6 6.6 7.8 27.9 37.7

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 B

••Quenched and Tempered Alloy Steel.

••Certified by DGUV GS-OA-15-05. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 5:1. d

••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature at a minimum of 400°C.

••Welded Master Link designed for 3-4 legs Chain, Wire Rope and Webbing Slings. ••Each link is marked with batch number that links to the test certificate with full tracebility to raw materials.

X-007 Welded Master Link Assembly

Item No.

Assembled with

X-007-19 X-007-25 X-007-28 X-007-32 X-007-36 X-007-40 X-007-45 X-007-50 X-007-60 X-007-70 X-007-90

AD-19 +2 AD-161 AD-251+2 AD-19 AD-28 +2 AD-22 AD-32 +2 AD-25 AD-361+2 AD-281 AD-40 +2 AD-32 AD-45 +2 AD-36 AD-50 +2 AD-401 AD-60 +2 AD-50 AD-70 +2 AD-601 AD-90 +2 AD-701

For WLL Grade 100 Chain (mm) β 0-45° 3 and 4-leg tonnes 7,8 5.3 10 8.9 10 12.9 13 17 16 23.6 16 28.1 20 38.3 22 45 26 65 32 85 150

Used to single

Proof hook according Load to DIN 15401 No.

kN 130 218 316 417 578 688 938 1103 1593 2083 3675

6 16 16 16 16 20 25 32 32 50 50

D 19 25 28 32 36 40 45 50 60 70 90

Dimensions (mm)

A 160 275 275 275 275 300 340 350 430 480 500

B 90 145 145 145 145 160 180 195 230 260 300

d 16 19 22 25 28 32 36 40 50 60 70

a 140 160 180 210 190 275 285 260 350 410 400

N.W.

b kg 70 2.4 90 5.2 100 7.1 115 10.0 100 12.2 145 19.2 155 26.5 130 32.3 195 62.3 220 100.4 200 156.4

★ Design factor 5:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel.

••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with ASTM A906/A906M, ASTM A952/A952M, ASME B30.9, ASME B30.26, EN 1677-4 and OSHA 1910.184, DIN PAS1061. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature at a minimum of 400°C. ••Welded Master Link designed for 1-2 legs Chain, Wire Rope and Webbing Slings. ••Each link is marked with batch number that links to the test certificate with full tracebility to raw materials.

X-002 Welded Master Link

Item No.

Code No.

X-002-13 X-002-16 X-002-19 X-002-22 X-002-28 X-002-32 X-002-36 X-002-45 X-002-50 X-002-60 X-002-70

BD-13 BD-16 BD-19 BD-22 BD-28 BD-32 BD-36 BD-45 BD-50 BD-60 BD-70

For Grade 100 Chain (mm) 1-leg 2-leg 7,8 6 7,8 10 13 10 13 10 16 13 20 16 22 20 26 22 32 26 32 -

WLL β 0-45° tonnes 2.8 4 6.7 8.5 11.5 17 25.1 38.3 45 64 85

Proof Load kN 69 98 164 208 282 417 615 938 1103 1568 2083

Used to single hook according to DIN 15401 No. 2.5 2.5 5 6 8 10 16 25 32 32 50

Dimensions (mm) D 13 16 19 22 28 32 36 45 50 60 70

A 110 110 135 160 180 200 260 300 300 400 460

B 60 60 75 90 100 110 140 180 200 200 250

N.W.

kg 0.3 0.5 0.9 1.5 2.7 3.9 6.3 11.8 15.2 27.0 43.0

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with ASTM A906/A906M, ASTM A952/A952M, ASME B30.9, ASME B30.26,EN 1677-4 and OSHA 1910.184, DIN PAS1061. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature at a minimum of 400°C. ••Welded Master Link designed for 1-2 legs Chain, Wire Rope and Webbing Slings. ••Each link is marked with batch number that links to the test certificate with full tracebility to raw materials.

X-002W Welded Master Link

Item No.

Code No.

X-002W-13 X-002W-16 X-002W-19 X-002W-22 X-002W-28 X-002W-32 X-002W-36 X-002W-60

CD-13 CD-16 CD-19 CD-22 CD-28 CD-32 CD-36 CD-60

For Grade 100 Chain (mm) 1-leg 2-leg 7,8 6 7,8 10 13 10 13 10 16 13 20 16 22 20 32

WLL β 0-45° tonnes 2.8 4 6.7 8.5 11.5 17 25.1 64

Proof Load kN 69 98 164 208 282 417 615 1568

Used to single hook according to DIN 15401 No. 4 5 6 10 10 12 20 50

Dimensions (mm) D 13 16 19 22 28 32 36 60

A 120 140 160 170 190 230 275 350

B 70 80 95 105 110 130 150 250

N.W.

kg 0.4 0.7 1.1 1.6 2.9 4.5 6.7 26.0

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 B

••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with ASTM A906/A906M, ASTM A952/A952M, ASME B30.9, ASME B30.26, EN 1677-4 and OSHA 1910.184, DIN PAS1061.

••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature at a minimum of 400°C. d

X-006 Welded Master Link Assembly

Item No.

Assembled with

X-006-19 X-006-22 X-006-28 X-006-32 X-006-36 X-006-50 X-006-501 X-006-60 X-006-70

BD-19 BD-22 BD-28 BD-32 BD-36 BD-50 BD-50 BD-60 BD-70

+2 +2 +2 +2 +2 +2 +2 +2 +2

DD-13 DD-16 DD-19 DD-22 DD-28 DD-32 DD-36 DD-45 DD-50

For Grade 100 Chain (mm) 3 and 4-leg 6 7,8 10 13 16 20 22 26 32

Used to single

WLL Proof hook according β 0-45° Load to DIN 15401 No. tonnes 4.2 8.2 10.7 15.7 22.2 34.1 40 56 85

kN 103 201 262 385 544 835 980 1372 2083

5 6 8 10 16 32 32 32 50

D 19 22 28 32 36 50 50 60 70

Dimensions (mm)

A 135 160 180 200 260 300 300 400 460

B 75 90 100 110 140 200 200 200 250

d 13 16 19 22 28 32 36 45 50

a 54 70 85 115 140 150 170 170 200

b 25 34 40 50 65 70 75 80 100

N.W. kg 1.3 2.2 3.9 6.1 10.6 21.2 23.8 41.3 63.7

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 B

••Quenched and Tempered Alloy Steel.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature at a minimum of 400°C.

X-006W Welded Master Link Assembly

Item No. X-006W-19 X-006W-22 X-006W-28 X-006W-32 X-006W-36 X-006W-60 X-006W-601

Assembled with CD-19 CD-22 CD-28 CD-32 CD-36 CD-60 CD-60

+2 +2 +2 +2 +2 +2 +2

DD-13 DD-16 DD-19 DD-22 DD-28 DD-32 DD-36

For Grade 100 Chain (mm) 3 and 4-leg 6 7,8 10 13 16 20 22

Used to single

WLL Proof hook according β 0-45° Load to DIN 15401 No. tonnes 4.2 8.2 10.7 15.7 22.2 34.1 40

kN 103 201 262 385 544 835 980

6 10 10 12 20 50 50

D 19 22 28 32 36 60 60

Dimensions (mm)

A 160 170 190 230 275 350 350

B 95 105 110 130 150 250 250

d 13 16 19 22 28 32 36

a 54 70 85 115 140 150 170

b 25 34 40 50 65 70 75

N.W.

kg 1.5 2.3 4.1 6.6 10.9 32.1 34.6

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 B

••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. d

••Tempering temperature at a minimum of 400°C.

X-006L Welded Master Link Assembly

Item No. X-006L-19 X-006L-22 X-006L-32 X-006L-36 X-006L-45

Assembled with BD-19 +2 BD-13 BD-22 +2 BD-16 BD-32 +2 BD-22 BD-36 +2 BD-28 BD-45 +2 BD-32

For Grade 100 Chain (mm) 3 and 4-leg 6 7,8 10 13 16

Used to single

WLL Proof hook according β 0-45° Load to DIN 15401 No. tonnes 4.2 8.2 10.7 15.7 22.2

kN 103 201 262 385 544

5 6 10 16 25

D 19 22 32 36 45

Dimensions (mm)

A 135 160 200 260 300

B 75 90 110 140 180

d 13 16 22 28 32

a b 110 60 110 60 160 90 180 100 200 110

N.W. kg 1.6 2.5 6.9 11.8 19.7

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature at a minimum of 400°C. ••Welded Master Link designed for 1 leg Chain, Wire Rope and Webbing Slings. ••Each link is marked with batch number that links to the test certificate with full tracebility to raw materials.

X-0080 Welded Master Link

Item No. X-0080-28 X-0080-32 X-0080-40

Code No. ED-28 ED-32 ED-40

For Grade 100 Chain (mm) 1-leg 13 16 20,22

WLL β 0-45° tonnes 6.7 10 19

Proof Load kN 164 245 466

Used to single hook according to DIN 15401 No. 25

25 25

Dimensions (mm)

N.W.

32 40

6.2 10.0

D 28

A 340

340 340

B 180

180 180

kg 4.7

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 B

••Quenched and Tempered Alloy Steel.

••Each link is marked with batch number that links to the test certificate with full tracebility to raw materials.

X-0081 Welded Master Link Assembly

Item No.

Assembled with

X-0081-22 X-0081-28

ED-22 +1 DD-13 ED-28 +1 DD-16

For Used to single WLL Proof hook according to Grade 100 Chain (mm) β 0-45° Load DIN 15401 No. 1-leg tonnes kN 6,7,8 2.5 61 25 10 4 98 25

D 22 28

Dimensions (mm)

A B 340 180 340 180

d 13 16

a 54 70

b 25 34

N.W. kg 3.2 5.4

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature at a minimum of 400°C.

••Welded Master Link designed for 3-4 legs Chain, Wire Rope and Webbing Slings.

••Each link is marked with batch number that links to the test certificate with full tracebility to raw materials.

X-0082 Welded Master Link Assembly

Item No. X-0082-22 X-0082-28 X-0082-32 X-0082-40 X-0082-401

Assembled with ED-22 ED-28 ED-32 ED-40 ED-40

+ + + + +

2 2 2 2 2

DD-13 DD-16 DD-19 DD-22 DD-25

For Grade 100 Chain (mm) 2-leg 4-leg 6,7,8 6 10 7,8 13 10 16 13 20 16

WLL β 0-45° tonnes 3.55 5.6 9.5 14.1 21.2

Used to single

Proof hook according Load to DIN 15401 No. kN 87 137 233 343 519

25 25 25 25 25

D 22 28 32 40 40

Dimensions (mm)

A 340 340 340 340 340

B 180 180 180 180 180

d 13 16 19 22 25

a 54 70 85 115 140

b 25 34 40 50 65

N.W.

kg 3.2 5.4 7.4 12.1 14.2

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature at a minimum of 400°C. ••Designed for 1-2 legs Chain, Wire Rope and Webbing Slings.

••Each link is marked with batch number that links to the test certificate with full tracebility to raw materials.

F org

G-100 Forged Oblong Master Link Item No. X-003-06 X-003-0806 X-003-1008 X-003-13 X-003-1310 X-003-16 X-003-1613 X-003-19 X-003-2216 X-003-26 X-003-2619 X-003-3222

For Grade 100 Chain (mm)

1-leg 6 7,8 10 13 13 16 16 19,20 22 26 26 32

2-leg 6 7, 8 10 13 16 19, 20 22

WLL β 0-45° tonnes 1.4 2.9 5.3 6.7 8.4 10.0 14.1 16.0 21.0 26.5 33.6 39.9

Used to single hook according to DIN 15401 No.

Proof Load kN 34 71 130 164 206 245 345 392 515 649 823 978

2.5 4 5 6 6 10 8 10 16 16 16 25

D 11 14 17 19 22 25 28 30 34 38 40 45

Dimensions (mm) A/W 100 120 140 150 160 190 180 200 240 250 250 300

B 60 70 80 90 95 110 105 120 140 150 150 180

N.W. kg 0.2 0.5 0.7 1.1 1.5 2.3 2.7 3.5 5.3 7.4 8.3 12.3

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products. B

••Manufactured in accordance with ASTM A906/A906M, ASTM A952/A952M, ASME B30.9, ASME B30.26 ,EN 1677-4,and OSHA 1910.184, DIN PAS1061. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1.

X-004 Welded Master Link Sub-links SPEC for X-0081, X-0082, X-006W. Items in grey area are not for sale individually.

Item No.

Code No.

X-004-13 X-004-16 X-004-19 X-004-22 X-004-28 X-004-32 X-004-36 X-004-40 X-004-45 X-004-50

DD-13 DD-16 DD-19 DD-22 DD-28 DD-32 DD-36 DD-40 DD-45 DD-50

For Grade 100 Chain (mm) 1-leg 2-leg 10 6 13 7,8 16 10 20 13 22 16 26 20 22 32 26 32

WLL β 0-45° tonnes 4 6.7 10 14 19 26.5 31 40.4 42.4 64

Proof Load kN 98 164 245 343 466 649 760 990 1039 1568

Dimensions (mm)

D 13 16 19 22 28 32 36 40 45 50

A 54 70 85 115 140 150 170 170 170 200

B 25 34 40 50 65 70 75 80 80 100

N.W.

kg 0.2 0.4 0.6 1.1 2.1 3.0 4.3 5.5 7.1 10.3

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

••Quenched and Tempered Alloy Steel. D

••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with DIN EN 1677-1 and DIN 5692. P

••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1 ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature at a minimum of 400°C. ••Each hook is marked with batch number that links to the test certificate with full traceability to raw materials. A

G-100 GrabEX Eye Grab Hook

Item No. X-079-06 X-079-08 X-079-10 X-079-13 X-079-16

WLL

tonnes 1.4 2.5 4 6.7 10

For Grade 100 Chain mm 5, 6 7, 8 10 13 16

A 8 10 12 16 19

B 18 24 31 37 48

D 9 13 14 18 24

Dimensions (mm) F 24 32 40 51 64

K 76 102 125 158 202

L 99 134 163 208 264

P 12 12 15 20 21

N.W. kg 0.24 0.54 1.03 2.18 4.39

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with DIN PAS 1061,EN 1677 and ASTM A952/ A 952M. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature at a minimum of 400°C. ••Each link is marked with batch number that links to the test certificate with full traceability to raw materials. ••Fully integrated shortening clutch and master link. ••No reduction in WLL when shortening chain. ••Speedy assembly. ••Light weight system. ••Cost effective compared to slings which use multiple components.

G100 GrabEX 1 Single Leg Assembly

Item No.

Code No.

X-A04-06 X-A04-08 X-A04-10 X-A04-13 X-A04-16

XAF-06 XAF-08 XAF-10 XAF-13 XAF-16

WLL

tonnes 1.4 2.5 4 6.7 10

For Grade 100 Chain mm 6 7,8 10 13 16

Can be used on single hook Acc. To DIN15401 No. 4 5 6 10 10

D 13 16 19 22 28

Dimensions (mm) A 120 140 160 170 190

B 70 80 95 105 110

K 196 242 285 328 392

N.W. kg 0.7 1.2 2.1 3.9 7.0

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

G100 GrabEX 2 Leg Assembly

Item No.

Code No.

X-A05-06 X-A05-08 X-A05-10 X-A05-13 X-A05-16

XAG-06 XAG-08 XAG-10 XAG-13 XAG-16

WLL

tonnes 2 3.5 5.6 9.4 14

For Grade 100 Chain mm 6 7,8 10 13 16

Can be used on single hook Acc. To DIN15401 No. 4 6 10 10 12

D 13 19 22 28 32

Dimensions (mm) A 120 160 170 190 230

B 70 95 105 110 130

K 196 262 295 348 432

N.W.

kg 0.9 2.2 3.8 7.0 13.6

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

G100 GrabEX 4 Leg Assembly

Item No.

Code No.

X-A06-06 X-A06-08 X-A06-10 X-A06-13 X-A06-16

XAH-06 XAH-08 XAH-10 XAH-13 XAH-16

WLL

tonnes 2.9 5.3 8.4 14.1 21

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

For Grade 100 Chain mm 6 7,8 10 13 16

Can be used on single hook Acc. To DIN15401 No. 6 10 10 12 20

D 19 22 28 32 38

Dimensions (mm) A 160 170 190 230 275

B 95 105 110 130 150

K 261 306 355 438 542

N.W. kg 2.4 4.6 8.1 15.8 28.9

100 D

••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with EN 1677- 1 and ASTM A952/ A952M.

••Certified by DGUV GS-OA-15-05 ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Suitable for use with both Grade 80 and Grade 100 chain.

Repair kit available for maintenance.

G-100 Connecting Link Item No.

For Grade 100 Chain

WLL

X-015-06 X-015-07 X-015-10 X-015-13 X-015-16 X-015-20 X-015-22 X-015-26 X-015-32

mm 6 7, 8 10 13 16 20 22 26 32

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0 26.5 40.0

Dimensions (mm) A 15 18 25 30 36 42 49 55 69

B 18 25 28 38 41 50 63 66 85

D 7 9 11 16 19 23 24 30 36

N.W. K 45 59 69 92 101 122 152 162 203

kg 0.08 0.2 0.3 0.7 1.2 2.1 3.5 4.8 9.0

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with EN 1677- 1 and ASTM A952/ A952M. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Suitable for use with both Grade 80 and Grade 100 chain. ••Dacromet surface finish for enhanced corrossion resistance.

Special pin and sleeve designed for maintenance purpose.

G-100 Connecting Link Dacromet® surface finish**

Item No.

For Grade 100 Chain

WLL

X-M015-06 X-M015-07 X-M015-10 X-M015-13 X-M015-16 X-M015-20 X-M015-22 X-M015-26 X-M015-32

mm 6 7, 8 10 13 16 20 22 26 32

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0 26.5 40.0

Dimensions (mm) A 15 18 25 30 36 42 49 55 69

B 18 25 28 38 41 50 63 66 85

D 7 9 11 16 19 23 24 30 36

N.W. K 45 59 69 92 101 122 152 162 203

kg 0.1 0.2 0.3 0.7 1.2 2.1 3.5 4.8 9.0

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

New! Safety Triggers

Quality approval by:

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with EN 1677- 3 and ASME B30.26, ASME B30.10. ••Certified by DGUV GS-OA-15-05 & DGUV GS-MO-15-05

••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL.

••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch.

H T

8-P025

8-P025T

For most sizes

For 26mm

G-100 Eye Self Locking Hook

Item No. X-025-06 X-025-07 X-025-10 X-025-13 X-025-16 X-025-20 X-025-22 X-025-26

For Grade 100 Chain mm 6 7,8 10 13 16 20 22 26

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0 26.5

A 21 25 32 40 50 60 70 80

D 10 11 13 16 21 23 24 25

Dimensions (mm) H 19 24 30 39 49 65 63 69

K 110 136 167 207 252 290 319 343

P 28 34 44 51 60 70 80 99

T 15 20 26 30 36 53 49 56

N.W.

kg 0.5 0.8 1.5 3.0 5.8 10.0 12.5 15.0

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with EN 1677- 3 and ASME B30.26, ASME B30.10, PAS1061.

••Certified by DGUV GS-MO-15-05 ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL.

••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch.

H T

X-P026

8-P025T

For load pin replacement

For trigger replacement

G-100 Clevis Self Locking Hook

Item No. X-026-06 X-026-07 X-026-10 X-026-13 X-026-16 X-026-20 X-026-22

For Grade 100 Chain mm 6 7,8 10 13 16 20 22

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0

A 6 9 11 14 18 21 24

H 19 24 30 39 49 65 63

Dimensions (mm) K 93 119 142 178 213 244 273

P 28 34 44 51 60 70 80

T 15 20 26 30 36 53 49

N.W. kg 0.4 0.9 1.4 3.0 5.0 11.0 13.5

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with EN 1677- 3 and ASME B30.26, ASME B30.10, PAS1061. ••Certified by DGUV GS-OA-15-05 & DGUV GS-MO-15-05. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch.

8-P025T For trigger

G-100 Swivel Self Locking Hook With Brass Bushing

Item No. X-027-06 X-027-07 X-027-10 X-027-13 X-027-16 X-027-20 X-027-22 X-027-26

For Grade 100 Chain mm 6 7,8 10 13 16 20 22 26

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0 26.5

A 32 36 41 46 61 74 97 123

B 22 29 34 43 50 82 95 115

Dimensions (mm)

D 12 13 16 21 23 25 33 42

H 19 24 30 39 49 65 63 69

K 149 186 218 276 329 387 457 535

P 28 34 44 51 60 70 80 99

T 15 20 26 30 36 53 49 56

N.W. kg 0.7 1.2 2.0 4.1 7.2 13.0 20.0 33.0

★ Design factor 4:1 proof tested and certified.

WARNING INFORMATION : This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate under load, see X-027N.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with EN 1677- 3 and ASME B30.26, ASME B30.10, PAS1061. ••Certified by DGUV GS-OA-15-05 & DGUV GS-MO-15-05 ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch. ••Built with ball bearing and enables full swivel feature under load.

8-P025T For trigger

G-100 Swivel Self Locking Hook with Ball Bearing, which performs full swivel under load.

Item No. X-027N-06 X-027N-07 X-027N-10 X-027N-13 X-027N-16 X-027N-20 X-027N-22 X-027N-26

For Grade 100 Chain mm 6 7,8 10 13 16 20 22 26

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0 26.5

A 32 36 41 46 61 74 97 123

B 22 29 34 43 50 82 95 115

Dimensions (mm)

D 12 13 16 21 23 25 33 42

H 19 24 30 39 49 65 63 69

K 149 186 218 276 329 387 457 535

P 28 34 44 51 60 70 80 99

T 15 20 26 30 36 53 49 56

N.W.

kg 0.7 1.2 2.0 4.1 7.2 13.0 20.0 33.0

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel.

••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 5:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch.

H B D C

G-100 Super Lock Hook Item No. X-019-02 X-019-03

WLL

tonnes* 2.0 3.0

A 32 32

B 177 177

Dimensions (mm)

C 41 41

D 16 16

H 30 30

K 290 290

P 108 108

T 29 29

N.W. kg 3.5 3.5

★ Design factor 5:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with EN 1677- 2 and ASME B30.26, ASME B30.10, PAS1061.

••Certified by DGUV GS-OA-15-05 & DGUV GS-MO-15-05 ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C

••Magnaflux crack detection is performed 100% on each batch.

8-P044

Repair kit available

G-100 Eye Sling Hook with Latch

Item No. X-044/S-06 X-044/S-07 X-044/S-10 X-044/S-13 X-044/S-16 X-044/S-20 X-044/S-22 X-044/S-26 X-044/S-32

For Grade 100 Chain mm 6 7,8 10 13 16 20 22 26 32

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0 26.5 40.0

A 20 25 32 40 50 61 51 65 88

D 10 12 15 18 22 27 31 35 40

Dimensions (mm) H 19 23 31 38 45 64 63 80 86

K 80 98 121 152 185 230 245 279 352

P1 23 28 36 40 44 54 76 77 114

T 17 20 23 27 32 48 52 60 65

N.W. kg 0.3 0.5 1.0 1.8 3.4 7.3 9.3 13.5 22.0

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with EN 1677- 2 and ASME B30.26, ASME B30.10, PAS1061. ••Certified by DGUV GS-OA-15-05 & DGUV GS-MO-15-05 ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch.

H T

X-P026

For load pin replacement

8-P044

For latch replacement

G-100 Clevis Sling Hook with Latch

Item No. X-043/S-06 X-043/S-07 X-043/S-10 X-043/S-13 X-043/S-16 X-043/S-20 X-043/S-22

For Grade 100 Chain mm 6 7,8 10 13 16 20 22

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0

A 6 9 11 14 17 24 25

H 23 22 30 37 42 64 61

Dimensions (mm) K 97 98 122 147 166 207 217

P1 23 27 34 44 48 57 73

T 15 18 24 30 39 48 52

N.W. kg 0.3 0.6 1.1 2.3 3.8 8.7 9.5

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with EN 1677- 2 and ASME B30.26.

A P

••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch.

D T

8-P801

For latch replacement

G-100 Alloy Eye Hoist Hook with Latch

Item No.

Hook Feature Code

8-173-015 8-173-02 8-173-03 8-173-05 8-173-07 8-173-11 8-173-15 8-173-22

BB CC DD EE FF GG HH JJ

For Grade 100 Chain mm 6 7,8 10 13 16 20 22 26

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0 26.5

A 23 29 32 40 51 62 72 90

D 19 20 25 31 38 57 62 81

d 11 13 15 18 24 28 32 40

Dimensions (mm) H 21 26 29 37 47 58 66 76

K 95 106 122 149 192 232 256 318

P 23 25 28 36 45 61 68 92

P1 19 20 25 31 39 67 62 81

T 17 21 24 31 37 48 56 68

N.W. kg 0.4 0.7 0.9 2.0 4.0 7.0 9.4 18.7

★ Design factor 4:1 proof tested and certified.

When using hoist hook with grade 100 chain, YOKE hoist hook is recommended to be grinded the WLL (which is for a safety factor 5:1) off the hook.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

A D

••Manufactured in accordance with EN 1677- 2 and ASME B30.26. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL.

K L

••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch.

P1 C H T G

G-100 Alloy Swivel Hoist Hook with Brass Washer

Item No.

Hook Feature Code

8-175-015 8-175-02 8-175-03 8-175-05 8-175-07 8-175-11 8-175-15

BB CC DD EE FF GG HH

For Grade 100 Chain

WLL

mm 6 7.8 10 13 16 20 22

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0

A 32 35 41 46 61 74 97

B 23 29 35 44 51 82 96

C 25 26 29 38 49 62 65

D 12 13 16 21 23 25 33

Dimensions (mm) G 60 91 102 130 166 196 221

H 21 25 29 36 46 56 64

K 126 143 172 211 258 326 372

L 158 181 217 288 328 409 471

P 24 24 28 35 43 61 72

P1 19 20 25 31 39 57 62

T 18 22 24 31 42 48 56

N.W. kg 0.7 0.9 1.5 3.2 5.7 9.5 16.5

★ Design factor 4:1 proof tested and certified.

When using hoist hook with grade 100 chain, YOKE hoist hook is recommended to be grinded the WLL (which is for a safety factor 5:1) off the hook.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

WARNING INFORMATION:This hook is a positioning device and is not intended to rotate under load. For swivel hooks designed to rotate under load, see 8-175N.

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

A D

••Manufactured in accordance with EN 1677- 2 and ASME B30.26. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL.

••Tempering temperature minimum 400°C

K L

••Magnaflux crack detection is performed 100% on each batch.

••Built with ball bearing and enables full swivel feature under load.

C H T G

G-100 Alloy Swivel Bearing Hoist Hook with Ball Bearing, which performs full swivel under load.

Item No.

Hook Feature Code

8-175N-015 8-175N-02 8-175N-03 8-175N-05 8-175N-07 8-175N-11 8-175N-15

BB CC DD EE FF GG HH

For Grade 100 Chain mm 6 7,8 10 13 16 20 22

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0

A 32 36 41 46 61 74 97

B 23 29 35 44 51 82 96

C 25 26 29 38 49 62 65

D 12 13 16 21 23 25 33

Dimensions (mm) G 80 91 102 130 166 196 221

H 21 25 29 36 46 58 64

K 126 143 172 211 258 326 372

L 158 181 217 269 328 409 471

P 24 24 28 35 43 61 72

P1 19 20 25 31 39 57 62

T 18 22 24 31 42 48 56

N.W. kg 0.7 0.9 1.6 3.2 5.7 9.5 16.0

★ Design factor 4:1 proof tested and certified.

When using hoist hook with grade 100 chain, YOKE hoist hook is recommended to be grinded the WLL (which is for a safety factor 5:1) off the hook.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with DIN PAS 1061 and ASTM A952/A 952M,EN 1677- 1.

••Certified by DGUV GS-OA-15-05 & DGUV GS-MO-15-05

••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C

••Not used for general chain sling applications, rather for use where a large throat opening is necessary.

••Before using the hook, check whether hooks without safety latches are allowed to be used for the particular application.

G-100 Eye Foundry Hook

Item No. X-047-07 X-047-10 X-047-13 X-047-16 X-047-20

For Grade 100 Chain mm 7,8 10 13 16 20

WLL

tonnes* 2.5 4.0 6.7 10.0 16.0

A 24 32 40 50 60

D 12 15 19 25 26

Dimensions (mm) H 27 32 39 47 57

K 123 149 180 213 248

P 62 74 88 98 113

T 19 23 32 41 46

N.W. kg 0.8 1.6 2.6 4.5 9.3

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with DIN PAS 1061 and ASTM A952/A 952M,EN 1677- 1. ••Certified by DGUV GS-OA-15-05

••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C ••Designed for the assembly of chain slings where wide throat openings are necessary.

H T

••Before using the hook, check whether hooks without safety latches are allowed to be used for the particular application.

X-P026 For load pin replacement

G-100 Clevis Foundry Hook

Item No. X-046-07 X-046-10 X-046-13 X-046-16 X-046-20

For Grade 100 Chain mm 7,8 10 13 16 20

WLL

tonnes* 2.5 4.0 6.7 10.0 16.0

A 9 11 14 18 21

H 27 32 39 47 62

Dimensions (mm) K 133 163 200 239 305

P 62 74 88 98 113

T 19 23 32 41 46

N.W.

kg 0.95 1.8 3.6 6.4 11.2

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel.

••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with DIN 5692, EN 1677-1 and ASTM A952/A 952M.

••Certified by DGUV GS-MO-15-05. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C

••Not for use with Omega Link ••Enables full WLL while in use, thanks to supporting wings which prevent chain link deformation.

G-100 Eye Grab Hook

Item No. X-041-06 X-041-07 X-041-10 X-041-13 X-041-16 X-041-20 X-041-22 X-041-26

For Grade 100 Chain mm 6 7,8 10 13 16 20 22 26

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0 26.5

A 13 16 20 26 30 40 42 50

F 26 30 40 52 57 73 70 100

Dimensions (mm) G 8 9 13 16 20 24 26 32

K 50 62 82 107 132 147 164 207

P 8 10 13 17 21 23 26 33

N.W. kg 0.2 0.3 0.6 1.4 2.4 4.0 5.0 10.1

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel.

••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with DIN PAS 1061, EN 1677-1 and ASTM A952/A 952M. ••Certified by DGUV GS-MO-15-05.

••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C ••Not for use with Omega Link ••Enables full WLL while in use, thanks to supporting wings which prevent chain link deformation.

X-P026 For load pin replacement

G-100 Clevis Grab Hook

Item No. X-042-06 X-042-07 X-042-10 X-042-13 X-042-16 X-042-20 X-042-22

For Grade 100 Chain mm 6 7,8 10 13 16 20 22

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0

A 7 10 11 15 18 22 24

F 25 30 41 52 57 73 70

Dimensions (mm) H 18 22 29 38 45 52 56

K 47 54 77 99 114 130 139

L 79 93 128 165 195 222 247

P 8 10 13 17 21 23 26

N.W. kg 0.2 0.4 0.8 1.6 2.7 4.8 6.4

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. B

••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with EN 1677- 1 and ASME B30.26.

C F

••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C

••The use of Clevis Clutch still allows 100% of the chain sling capacity.

••With the locking system and spring locking pin design to enhance security and prevent the chains from disengaging.

Push to Release Spring Locking Pin, for safety purpose.

G-100 Clevis Clutch - Locking Type

Item No. X-061-06 X-061-07 X-061-10 X-061-13 X-061-16 X-061-20

For Grade 100 Chain mm 6 7, 8 10 13 16 20

WLL

tonnes 1.4 2.5 4.0 6.7 10.0 16.0

A 7 10 12 15 18 22

B 7 10 12 15 21 23

Dimensions (mm) C 10 10 12 16 19 23

D 7 10 12 16 19 21

E 18 24 28 39 48 55

F 50 56 66 88 103 132

N.W. kg 0.3 0.5 0.9 2.2 3.7 5.8

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with EN 1677- 1 and ASME B30.26. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C ••Dual locking pins that provide safer locking mechanism. ••Simple assembling and disassembling without special tool required.

A G

K F

D E

G-100 Shortening Clutch

Item No. X-078-07 X-078-10 X-078-13 X-078-16

For Grade 100 Chain mm 7, 8 10 13 16

WLL

tonnes 2.5 4 6.7 10

A 12 13 15 21

C 20 26 33 39

D 10 12 16 19

Dimensions (mm) E 23 29 37 46

F 70 87 115 143

H 22 26 36 39

G 9 11 15 19

K 128 154 203 248

N.W. kg 0.7 1.3 2.8 5.3

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

www.yoke.net

Quality approval by:

100 ••Quenched and Tempered Alloy Steel. ••Manufactured in accordance with EN 1677- 1. ••Manufactured in accordance with ASTM A952/A952M, DIN PAS 1061. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch. »»American Patent

8-P950

For push lock replacement

G-100 Eye Grip Safe Locking Hook

Item No. X-950-10 X-950-13 X-950-16 X-950-20 X-950-22

For Grade 100 Chain mm 10 13 16 20 22

WLL tonnes* 4.0 6.7 10.0 16.0 19.0

A 32 40 50 60 70

D 13 16 21 23 24

H 31 39 47 56 59

Dimensions (mm) K O P 175 49 71 227 57 80 277 78 114 329 91 127 350 105 151

T 27 34 39 54 56

W 139 174 212 250 260

N.W. kg 1.9 3.0 6.3 11.7 14.5

★ Design factor 4:1 proof tested and certified

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••Manufactured in accordance with EN 1677- 1. ••Manufactured in accordance with ASTM A952/A952M, DIN PAS 1061. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch.

»»American Patent

8-P950 For push lock replacement

G-100 Clevis Grip Safe Locking Hook

Item No. X-951-10 X-951-13 X-951-16 X-951-20 X-951-22

For Grade 100 Chain mm 10 13 16 20 22

WLL tonnes* 4.0 6.7 10.0 16.0 19.0

A 11 14 18 21 24

H 31 39 47 56 59

Dimensions (mm) K O P 153 49 71 206 57 80 243 78 114 310 91 127 300 105 151

T 27 34 39 54 56

W 139 174 212 250 260

N.W. kg 1.9 4.1 6.4 12.7 14.1

★ Design factor 4:1 proof tested and certified

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

8-P950 For push lock replacement

G-100 Swivel Grip Safe Locking Hook

Item No. X-952N-10 X-952N-13 X-952N-16 X-952N-20 X-952N-22

For Grade 100 Chain mm 10 13 16 20 22

WLL

tonnes* 4.0 6.7 10.0 16.0 19.0

A 41 46 61 74 97

B 34 44 50 82 95

D 16 21 23 25 33

Dimensions (mm) H 31 39 47 56 59

K 225 285 345 433 475

O 49 57 78 91 105

P 71 80 114 127 151

T 27 34 39 54 56

W 139 174 212 250 260

N.W. kg 2.4 5.2 8.4 14.5 19.9

★ Design factor 4:1 proof tested and certified

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with EN 1677- 1, PAS1061 and ASME B30.26.

A D

••Certified by DGUV GS-OA-15-05. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch.

G-100 Web Sling Connector

Item No. X-016-06 X-016-07 X-016-10 X-016-13 X-016-16 X-016-20 X-016-22

For Grade 100 Chain mm 6 7,8 10 13 16 20 22

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0

A 15 18 25 30 36 42 49

B 17 22 26 35 38 46 59

Dimensions (mm) D 7 9 11 16 19 22 24

K 55 62 78 95 115 132 187

W 38 40 47 53 67 80 125

N.W. kg 0.2 0.3 0.6 1.1 2.0 3.2 7.7

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel. ••At least 25% greater WLL than traditional G80 products.

••Manufactured in accordance with EN 1677- 1, PAS1061 and ASME B30.26. ••Certified by DGUV GS-OA-15-05. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1. ••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C

••Magnaflux crack detection is performed 100% on each batch.

1 ton

2 ton

3 ton

5 ton

G-100 Web Sling Hook

Item No.

Color

X-032-01 X-032-02 X-032-03 X-032-05

Violet Green Yellow Red

WLL

tonnes* 1 2 3 5

H 20 27 32 44

K 89 116 119 145

Dimensions (mm) P 25 30 32 45

T 15 20 26 38

W 43 53 64 61

N.W. kg 0.7 1.5 2.4 3.5

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel.

••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with EN 1677- 3, PAS1061, ASTM A906/A906M, ASTM A952/A952M, ASME B30.9, ASME B30.10, ASME B30.26 and OHSA 1910.184. ••Certified by DGUV GS-OA-15-05. ••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL. ••Tempering temperature minimum 400°C

••Magnaflux crack detection is performed 100% on each batch.

8-P025T for trigger

G-100 Round Sling Self Locking Hook

Item No. X-028-06 X-028-07 X-028-10 X-028-13 X-028-16 X-028-20 X-028-22

For Grade 100 Chain mm 6 7,8 10 13 16 20 22

WLL

tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0

H 19 24 30 39 49 62 63

K 138 169 196 253 305 328 416

Dimensions (mm) P 29 34 44 52 60 90 80

T 15 20 26 30 36 48 49

W 38 40 47 53 67 80 125

N.W.

kg 0.6 1.1 1.8 3.9 6.9 12.0 18.6

★ Design factor 4:1 proof tested and certified.

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel.

G T

••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with EN 1677- 1 and ASME B30.26.

••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured. ••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL.

••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch.

G-100 Clevis Master Link

Item No. X-059-07 X-059-10 X-059-13 X-059-16

For Grade 100 Chain mm 7,8 10 13 16

WLL

tonnes* 2.5 4.0 6.7 10.0

A 9 11 14 18

G 65 80 108 124

Dimensions (mm) H 15 18 22 26

K 99 125 168 198

L 80 100 136 158

T 15 19 25 27

N.W. kg 0.4 0.8 1.5 2.4

★ Design factor 4:1 proof tested and certified

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100 ••Quenched and Tempered Alloy Steel.

••At least 25% greater WLL than traditional G80 products. ••Manufactured in accordance with EN 1677- 1 and ASME B30.26.

••Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.

••Design Factor 4:1.

••Fatigue rated to 20,000 cycles at 1.5 times the WLL.

W C

••Tempering temperature minimum 400°C ••Magnaflux crack detection is performed 100% on each batch.

G-100 Clevis Shackle

Item No. X-066-07 X-066-10 X-066-13 X-066-16

For Grade 100 Chain mm 7,8 10 13 16

WLL

tonnes* 2.5 4.0 6.7 10.0

A 9 11 14 18

C 79 93 118 141

Dimensions (mm)

G 34 40 44 54

K 59 78 98 112

L 35 48 64 69

M 16 20 22 28

W 33 37 49 60

N.W. kg 0.4 0.8 1.4 2.5

★ Design factor 4:1 proof tested and certified

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

Accessories G-100 Coupling Pin & Sleeve Set.

Latch Kits.

for X-015

for 8-044, 8-043, X-044, X-043 Item No. X-P015-06 X-P015-07 X-P015-10 X-P015-13 X-P015-16 X-P015-20 X-P015-22 X-P015-26 X-P015-32

Working Size Load Limit inch mm tonnes* 7/32 6 1.4 1/4 - 5/16 7 2.5 3/8 10 4.0 1/2 13 6.7 5/8 16 10.0 3/4 18,20 16.0 7/8 22 19.0 1 26 26.5 1 1/4 32 40.0

Item No. 8-P044-06 8-P044-07 8-P044-10 8-P044-13 8-P044-16 8-P044-20 8-P044-22 8-P044-26 8-P044-32

Size inch mm 7/32 6 1/4 - 5/16 7 3/8 10 1/2 13 5/8 16.0 3/4 18, 20 7/8 22 1 26 1 1/4 32

Trigger Kits For Grip Self Locking Hooks

G-100 Coupling Pin & C-Sleeve Set. for X-M015

For X-950, X-951, X-952N Item No.

Size

inch mm X-PM015-06 7/32 6 X-PM015-07 1/4 - 5/16 7 X-PM015-10 3/8 10 X-PM015-13 1/2 13 X-PM015-16 5/8 16 X-PM015-20 3/4 18, 20 X-PM015-22 7/8 22 X-PM015-26 1 26 X-PM015-32 1-1/4 32

Working Load Limit tonnes* 1.4 2.5 4.0 6.7 10.0 16.0 19.0 26.5 40.0

for X-026 , X-042 , X-043 , X-046

For X-950, X-951, X-952N

Size

inch mm X-P026-06 7/32 6 X-P026-07 1/4 - 5/16 7 X-P026-10 3/8 10 X-P026-13 1/2 13 X-P026-16 5/8 16 X-P026-20 3/4 18, 20 X-P026-22 7/8 22

Working Load Limit tonnes* 1.4

Item No.

1.5 4.0 6.7 10.0 16.0 19.0

8-P950-10 8-P950-13 8-P950-16 8-P950-20

Trigger Kits For Grip Self Locking Hooks

G-100 Load Pin Kits

Item No.

Working Size Load Limit inch mm tonnes* 3/8 10 4.0 1/2 13 6.7 5/8 16 10.0 3/4 20,22 16.0

Item No.

Working Size Load Limit inch mm tonnes* 3/8 10 4.0 1/2 13 6.7 5/8 16 10.0 3/4 20,22 16.0

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

Accessories

Trigger Kits for G80 and G100 Self Locking Hooks Item No.

inch 7/32 1/4-5/16 3/8 1/2 5/8 3/4 7/8 1 1-1/1/8

8-P025-06 8-P025-07 8-P025-10 8-P025-13 8-P025-16 8-P025-20 8-P025-22 8-P025-26 8-P025-28

Size

mm 6 7 10 13 16 18,20 22 26 28

Index by Part No.

**For G100 size 20mm: X-P025-20

New Trigger Kits for Self Locking Hooks size 20mm, 26mm, and 28mm after design change

Item No.

Product No. X-025-06 X-025-07 X-025-10 X-025-13 X-025-16 X-025-20 X-025-22 X-025-26 X-025-28 8-025-06 8-025-07 8-025-10 8-025-13 8-025-16 8-025-20 8-025-22 8-025-26 8-025-28

Repair Kits No. 8-P025-06 8-P025-07 8-P025-10 8-P025-13 8-P025-16 X-P025-20 8-P025-22 8-P025T-26 8-P025-28 8-P025-06 8-P025-07 8-P025-10 8-P025-13 8-P025-16 8-P025T-20 8-P025-22 8-P025T-26 8-P025T-28

G80 size 20mm

Size

inch mm 3/4 18,20 8-P025T-20 G80 and G100 size 26mm

Item No.

Size

inch 8-P025T-26 1 G80 size 28mm

Item No.

8-P025T-28

inch 1-1/8

Size

mm 26

mm 28

WARNING

YOKE Industrial Corp.

DISCOVERY VIDEO

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

INDEX

By Item. Number Item No.

Page

By Product Name

Product No.

Page

X-001

X-001 Welded Master Link

Alloy Eye Hoist Hook

X-007

X-007 Welded Master Link Assembly

Alloy Swivel Hoist Hook

X-002

X-002 Welded Master Link

Alloy Swivel Bearing Hoist Hook

X-002W

X-002W Welded Master Link

Clevis Self Locking Hook

X-006

X-006 Welded Master Link Assembly

Clevis Sling Hook

X-006W

X-006W Welded Master Link Assembly

Clevis Foundry Hoo ㄔ k

X-006L

X-006L Welded Master Link Assembly

Clevis Grab Hook

X-0080

X-0080 Welded Master Link

Clevis Clutch - Locking Type

X-0081

X-0081 Welded Master Link Assembly

Clevis Grip Safe Locking Hook

X-0082

X-0082 Welded Master Link Assembly

Clevis Master Link

X-003

G-100 Forged Oblong Master Link

Clevis Shackle

X-004

X-004 Welded Master Link

Eye Self Locking Hook

X-079

G-100 GrabEX Eye Grab Hook

Eye Sling Hook

X-A04

G100 GrabEX 1 Single Leg Assembly

Eye Foundry Hook

X-A05

G100 GrabEX 2 Leg Assembly

Eye Grab Hook

X-A06

G100 GrabEX 4 Leg Assembly

Eye Grip Safe Locking Hook

X-015

G-100 Connecting Link

G-100 Forged Oblong Master Link

X-M015

G-100 Connecting Link

G-100 GrabEX Eye Grab Hook

X-025

Eye Self Locking Hook

G100 GrabEX 1 Single Leg Assembly

X-026

Clevis Self Locking Hook

G100 GrabEX 2 Leg Assembly

X-027

Swivel Self Locking Hook

G100 GrabEX 4 Leg Assembly

X-027N

Swivel Self Locking Hook

G-100 Connecting Link

X-019

Super Lock Hook

G-100 Connecting Link

X-044

Eye Sling Hook

Round Sling Self Locking Hook

X-043

Clevis Sling Hook

Swivel Self Locking Hook

8-173

Alloy Eye Hoist Hook

Swivel Self Locking Hook

8-175

Alloy Swivel Hoist Hook

Super Lock Hook

8-175N

Alloy Swivel Bearing Hoist Hook

Shortening Clutch

X-047

Eye Foundry Hook

Swivel Grip Safe Locking Hook

X-046

Clevis Foundry Hook

Web Sling Connector

X-041

Eye Grab Hook

Web Sling Hook

X-042

Clevis Grab Hook

X-001 Welded Master Link

X-061

Clevis Clutch - Locking Type

X-007 Welded Master Link Assembly

X-078

Shortening Clutch

X-002 Welded Master Link

13 14

X-950

Eye Grip Safe Locking Hook

X-002W Welded Master Link

X-951

Clevis Grip Safe Locking Hook

X-006 Welded Master Link Assembly

X-952N

Swivel Grip Safe Locking Hook

X-006W Welded Master Link Assembly

X-016

Web Sling Connector

X-006L Welded Master Link Assembly

X-032

Web Sling Hook

X-0080 Welded Master Link

X-028

Round Sling Self Locking Hook

X-0081 Welded Master Link Assembly

X-059

Clevis Master Link

X-0082 Welded Master Link Assembly

X-066

Clevis Shackle

X-004 Welded Master Link

WARNING

NEVER EXCEED PUBLISHED WORKING LOAD LIMIT

100

An ISO 9001 Registered Company

YOKE INDUSTRIAL CORP. #39, 33rd Road,

Taichung Industrial Park, TAIWAN Tel : +886-4-2350-8088 Fax : +886-4-2350-1001 E-mail : info@mail.yoke.net

www.yoke.net

Catalog No. 8-2018 Extreme-100 2018/1070115/210X297

Taichung 407,