Finding the Equipment Management Sweet Spot
42 October/November 2019
#1
in the market! THE LEADING TRADE MAGAZINE IN THE CONCRETE INDUSTRY
2020 PRODUCT REVIEW
130+ Prod uc Insid ts e
WWW.FORCONSTRUCTIONPROS.COM/CONCRETE
CONC1019_01_CoverFinal.indd 1
10/18/19 1:17 PM
A ONE-OF-A-KIND LIGHTWEIGHT DRIVE-IN SCREED
• Upper Deck • Residential • Slab-On-Grade • 3D Surfaces
New from Ligchine, the SpiderScreed™ addresses the common issues of drive-in screeds such as weight, power, navigation, and leveling capabilities. Aluminum frames, high speed electric actuators, unmatched navigation with the Versa-Drive™ system, and Ligchine’s patented machine leveling system elevate the SpiderScreed™ into a class of its own.
>> See more at www.ligchine.com sales@ligchine.com | 812-903-4500
CONC1019_02-3_TOC.indd 2
10/10/19 9:09 AM
WHAT’S INSIDE
October/November 2019 | Issue 6, Volume 19
2020 PRODUCT REVIEW
Product Categories 8 Forms and Reinforcement 12 Pumps, Placing & Consolidation 20 Screeds & Trowels 24 Decorative Concrete Products 29 Concrete Polishing Products & Equipment 36 Surface Prep & Dust Extraction
38 Sawing & Drilling 40 Repair 44 Testing & Software 48 Worksite Products & Equipment 56 Power Tools, Hand Tools Lasers & Leveling
Departments 4 Editor’s Letter 57 Ad Index
Features 6 Addressing the Need for Sharp Workers
Overcome workforce shortages by investing in existing employees through on-going skills and technology advantages.
18 OmniPoly Power Trowel Blade
As the popularity of polished concrete on large surfaces grows, so too does the demand for better tools.
42 Finding the Equipment Management Sweet Spot
New software platforms help contractors automate and streamline data capture to make better decisions about their equipment fleet.
What’s Online Read these online exclusive articles at www.ForConstructionPros.com/ concrete.
Aesthetics, Concrete Mixture Requirements Blend Smoothly at Underground Station Twin-shaft batch mixers are producing a highly complex concrete needed for the architectural centerpiece of the new Stuttgart underground station. Search: 21087483
Concrete Scanning Professionals Use Portable GPR to Standout from the Competition. Two professionals share how and why they are using the GSSI StructureScan Mini XT concrete scanner and how it provides opportunities other concrete scanners may not. Search: 21086214
45 The Skid Steer Saw When the job requires more mobility, the attachment really shines.
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 3
CONC1019_02-3_TOC.indd 3
10/10/19 10:28 AM
EDITOR’S LETTER Published by AC Business Media
A Year of
INNOVATION
N
ew equipment is supposed to make the job easier, more efficient and safer. That seems to be a common theme among many of the products on Concrete Contractor’s 2019 Product Review. Our annual product review, featuring over 130 products across 11 segments, is meant to act as a guide to the latest and greatest products designed for concrete contractors. All products within this issue can be found at www.ForConstructionPros.com. If you are interested in learning more about a specific product, enter the 8-digit code in the search box on the site to be taken directly to the product. In addition to the product review, this issue features product profiles that highlight the true spirit of innovation. When we think of innovation, we typically think of advanced technology. And while a lot of the products in this year’s guide do in fact include advances in technology, others are simply innovative solutions to meet contractor’s growing needs. On page 18, we highlight the OmniPoly Power Trowel Blade, which was born from increased demand for polished concrete on large surfaces. Traditional steel power blades often leave dark burnish marks on the concrete while finishing. The OmniPoly blade’s continuous bottom and omnipoly material solve this problem, leaving a more uniformed surface free from markings. Maybe my favorite product feature, Cut Facebook.com/ ConcreteContractor
Advisory Board
Amy Wunderlin, Associate Editor AWunderlin@ ACBusinessMedia.com
Inc.’s skid steer saw attachment was developed by a father-son team of concrete cutters. Built custom for a job, order requests soon rolled in after the pair posted an action video of the saw on YouTube. Learn more about how the creativity of two contractors is now opening opportunities and boosting efficiency for others on page 45. Once you have the equipment and tools you need, making sure to properly maintain and manage that fleet becomes a key factor in maximizing your investments and improving your bottom line. You need to find the “equipment management sweet spot.” According to Jeremy Larsen, vice president of product management for Viewpoint, that “sweet spot” occurs when the cost of operations dominates the cost of ownership for a piece of equipment. To learn why and how to determine your equipment management sweet spot, check out the article on page 42. We hope you enjoy this year’s read and maybe even find a solution to your pain points.
Follow us @ Concreteinsider
Kim Basham KB Engineering Cheyenne, Wyo.
Jim Cuviello Cuviello Concrete Polished|Stained|Crafted Stevensville, Md.
Jim Baty Concrete Foundations Association Mt. Vernon, Iowa
Chris Klemaske T.B. Penick & Sons, Inc. San Diego, Calif.
Search: Concrete Polishing
Dennis Purinton Purinton Builders, Inc. East Granby, Conn.
201 N. Main Street, Fort Atkinson, WI 53538 (800) 538-5544 • www.ACBusinessMedia.com
www.ForConstructionPros.com/Concrete PUBLICATION STAFF
Associate Editor Contributing Writers Senior Production Manager Art Director Audience Development Director Audience Development Manager
Amy Wunderlin, (800) 538-5544, ext. 1267 awunderlin@ACBusinessMedia.com Kim Basham, Jim Baty, Brad Humphrey, David C. Whitlock, Joe Nasvik, Chad White Cindy Rusch April Van Etten Wendy Chady Angela Franks
ADVERTISING SALES (800) 538-5544
Eric Servais Erica Finger Nikki Lawson Sean Dunphy Denise Singsime National Automotive Sales
eservais@ACBusinessMedia.com efinger@ACBusinessMedia.com nlawson@ACBusinessMedia.com sdunphy@ACBusinessMedia.com dsingsime@ACBusinessMedia.com Tom Lutzke, tlutzke@ACBusinessMedia.com (630) 484-8040
FORCONSTRUCTIONPROS.COM
Digital Operations Manager Digital Sales Manager Editor Managing Editor
Nick Raether nraether@ACBusinessMedia.com Joel Franke jfranke@ACBusinessMedia.com Larry Stewart lstewart@ACBusinessMedia.com Kimberly Hegeman khegeman@ACBusinessMedia.com
CHANGE OF ADDRESS & SUBSCRIPTIONS
N in
PO Box 3605, Northbrook, IL 60065-3605, Phone: (877) 201-3915 Fax: (847) 291-4816 • circ.ConcreteContractor@omeda.com REPRINTS Sean Dunphy, (800) 538-5544 , sdunphy@ACBusinessMedia.com
in A t
LIST RENTAL Jeff Moriarty, SVP, Business & Media Solutions Infogroup, Phone: (518) 339-4511 Email: jeff.moriarty@infogroup.com AC BUSINESS MEDIA
Chief Executive Officer Chief Financial Officer Chief Digital Officer Chief Content Officer Chief Revenue Officer Director of Digital Operations & IT Director of Digital Strategy
Barry Lovette JoAnn Breuchel Kris Heineman Christoph Trappe Amy Schwandt Nick Raether Joel Franke
Published and copyrighted 2019 by AC Business Media. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage or retrieval system, without written permission from the publisher. CONCRETE CONTRACTOR (USPS 021-799, ISSN 1935-1887 (print); ISSN 2471-2302 (online) is published 7 times a year: January, February/March, April/May, June/July, August/September, October/November and December by AC Business Media, 201 N. Main Street, Fort Atkinson, WI 53538. Printed in the U.S.A. Periodicals postage paid at Fort Atkinson, WI, and additional entry offices. POSTMASTER: Send address changes to Concrete Contractor, PO Box 3605 Northbrook, IL 60065-3605 October/November 2019, Issue 6, Volume 18 One year subscription to non-qualified individuals: U.S. 1 year: $35, 2 years: $70. Canada & Mexico 1 year: $60, 2 years: $105. All other countries 1 year: $85, 2 years: $160 (payable in U.S. funds drawn on U.S. banks). Single copies available (prepaid only) $10.00 each (U.S., Canada & Mexico), $15.00 each (International). Canada Post PM40612608. Return Undeliverable Canadian Addresses to: Concrete Contractor, PO Box 25542, London, ON N6C 6B2. Printed in the U.S.A.
Craig Coppersmith, P.E. Nox-Crete Omaha, Neb.
Concrete Contractor is the Official Media Sponsor of the CFA Foundation Company Certification Program
®
4 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_04-5_Editor.indd 4
I T
10/10/19 1:51 PM
NEW CAT® NEXT GEN MINI EXCAVATORS
SELECT YOUR MODEL AND GROW YOUR BOTTOM LINE
IT’S POSSIBLE TO HAVE IT ALL WITH THE NEW NEXT GEN CAT® MINI EXCAVATORS Now you can have every feature of a large excavator in the new Cat ® Mini Excavators. Loaded with performance, they include four industry first features that include Stick Steer, Cruise Control, Advanced Monitor and High Flow Hydraulics. It is a new level of performance, that will grow your bottom line every hour on the job.
20
UP TO % LOWER TOTAL OWNERSHIP COST
15
UP TO % MORE PERFORMANCE
CAT 307.5
CAT 310
4
INCLUDES INDUSTRY FIRST FEATURES
Learn more today by visiting www.NECatDealer.com/minihex
CAT 308 CR
CAT 309 CR
Since 1923
SINCE 1927
Alban CAT
www.albancat.com Baltimore, MD 800-492-6994
SINCE 1948
Cleveland Brothers
www.clevelandbrothers.com Murrysville, PA 844-569-9650
SINCE 1957
Foley, Incorporated www.foleyinc.com Piscataway, NJ 732-885-5555
SINCE 1923
H.O. Penn Machinery www.hopenn.com Poughkeepsie, NY 844-CAT-1923
SINCE 1960
Milton CAT
www.miltoncat.com Milford, MA 866-385-8538
© 2019 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Yellow”, the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. www.cat.com / www.caterpillar.com
CONC1019_5A_Caterpillar.indd 1
10/10/19 10:14 AM
WORKFORCE
By Jeff Winke
Addressing the Need for
SHARP WORKERS Overcome the workforce shortage by investing in existing employees through on-going skills and technology advantages.
T
he scene: A busy mid-size construction contractor office where owner-operator Bill plops into his desk chair while thinking that he and his incredible crew need relief... need help. "I'm gonna close my eyes for a minute," he promises, and dozes into a familiar dream where he's sifting through a stack of resumes of experienced, qualified workers all eager to work for him. He smiles contentedly until, "Bill! Bill! Are you sleeping? We need your help!" It is a scary world out there. Construction contractors, like Bill, know that in spades. They struggle
with tight deadlines, demands for regulatory-governed quality, better productivity, lower costs, more time in a day, and that ominous need for a competent workforce. The Associated General Contractors of America released a study of construction firms in the United States. A few key statistics in the Workforce Shortage Report include: • 8 out of 10 construction firms cannot find sufficient qualified employees • 19% are investing in labor saving equipment and tools that require smarter workers • 82% believe that it will be more difficult to find qualified workers over the next 12 months "As the U.S.-based construction workforce becomes increasingly thinly spread," the AGC report stated, "owners and managers of construction firms will be required to approach the problem of labor shortage creatively, in order to convert these problems into opportunities. A key to overcoming the labor shortage, in the construction industry, is to invest in current employees to increase their
skills, knowledge and abilities, as well as to support existing employees with labor saving tools and equipment." Investing in existing employees has definite advantages when compared to hiring new employees. • Current employees know how the company operates and manages its project sites. The AGC says • Current employthat 8 out of 10 ees are a known construction firms cannot find the entity. Managers sufficient qualified know their employees they need. A key to strengths and overcome the weaknesses and labor shortage is to invest in training may be better your current able to manage employees. and lead them than new hires. • With new employees there are start-up administrative costs, drug testing, equipment and safety training, and general acclimation to new managers, co-workers and procedures. • Current employees pose less risk. Studies have confirmed higher injury rates among workers who have been on the job for less than a
6 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_06-7_Workforce.indd 6
10/10/19 9:11 AM
year. Consider also that hiring new employees with less experience and then moving them quickly into the field to meet demands may create greater risk. Clearly, on-going skills and technology training of existing employees can prove to be critical not only for retention but the success of the company. "The penalty for not keeping current with technology is longer project timelines," Ron Oberlander, vice president, Global Professional Services, Topcon Positioning Group, Livermore, CA, says. "Successful training focuses on the work process, which yields greater efficiencies and better results."
TRAINING IS AN INVESTMENT With the training emphasis on workflow, employees can develop a broader perspective on construction projects and all that goes into the tasks that culminate in their completion. The emphasis on work processes demonstrates a respect for the intelligence of employees and invites them to think in a partner role, which can strengthen their commitment to the job and the company.
ays 10 ms he ed ey to he is ng ent es.
"I've completed a couple of training programs conducted by Topcon and am scheduled for another in the next six months," John Poirier, project manager with Warman Excavating & Trenching Ltd., Waldheim, Saskatchewan, Canada, says. "It is well worth the time; and the cost is inconsequential compared to what I learn.
I'm getting trained by unbelievable trainers — seasoned experts with 20 to 30 years of experience with the company. They know the products, the market and understand the workflow." "Technology changes too frequently," Oberlander adds. "When we host attendees — distributors and end users — at our training sessions we focus on workflows and how the key features of our products and systems improve the productivity and efficiency of end users." With the strong job economy today, it is sometimes difficult to find talent to fill open positions. A benefit of training, and the power of easy-to-use technology, means that construction contractors can hire less-skilled talent. They can either send them to instructor-led courses or put them through e-learning-based training. Either way, the knowledge and skills gap can be bridged. Since every construction project is unique, and may require different technology and solutions, it is important — actually imperative — that workers at all experience levels engage in training regularly to remain up to date. "Think about the advances in consumer technology...such as the Apple iPhone," Oberlander says, "The innovations and high-powered processors that upgrade the iPhone annually are being used in construction equipment. Look at the displays and systems inside of a new excavator, dozer or other heavy equipment which now make them more productive to run and service; and in turn, makes the contractor more efficient and profitable." Oberlander went on to describe how GPS machine control has evolved during the past 20 years from little adoption of machine automation to a market where some machine manufacturers are integrating machine control technology direct from the
technology-provider's factory floor into their machines or even wiring heavy equipment so that they are capable of later adding aftermarket systems. Some government agencies are even specifying that contractors working on their projects must employ GPS machine control on their equipment.
STAY UP TO DATE Construction contractors struggle with the need to keep up to date on the latest technology and trends that make their projects more efficient, while attracting and keeping a full workforce in a tight labor market. The answers may be found in training both existing employees and new inexperienced workers on labor saving technologies with a focus on the work process, which yields greater efficiencies and better results. What do you tell others considering training? Poirier said, "'Go for it!' There is 100% benefit to training; otherwise you're looking at your technology being the world's most expensive paperweight. Training gave me knowledge and confidence to feel comfortable with the technology. I recently set up a new excavator using a system I had mounted on a different machine. It works great and would have cost me $42,000 to have someone come in and set up and initialize the GPS system on the excavator — all work I did myself." Clearly training can benefit contractors. It can add knowledge, skills and the confidence to succeed.
The answer to the labor shortage may be found in training both existing employees and new inexperienced workers on labor-saving technologies with a focus on the work process which yields greater efficiencies and better results.
Jeff Winke is a business and construction writer based in Milwaukee, WI. He can be reached through jeff_winke@ yahoo.com.
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 7
CONC1019_06-7_Workforce.indd 7
10/10/19 9:12 AM
FORMS & REINFORCEMENT Simpson Strong-Tie ET-HP Anchoring Adhesive
Titan Formworks Universal Wedge Clamp
The “one-size-fits-all” Universal Wedge Clamp is designed for 2-in. x 4-in. wood lacing and bracing with a variety of steel post shores, the new aluminum TITAN XL shore and other industry shores. • “U” shaped frame captures steel shores in a traditional fashion • Curved claw design captures sides of the aluminum XL shore profile ForConstructionPros.com/20977404
E-Zbar Combination Bar Clip and Spreader
The redesigned E-ZBar is now a universal combination bar clip and spreader for vertical applications. • Holds required spacing between reinforcing steel and vertical formwork • Cut to length on the jobsite and assembled with corresponding clips to match job specifications • Core made from 3/8-in. coil rod • Available in metal or plastic ForConstructionPros.com/21064319
PERI Formwork Systems ALPHA Prop Series The new Alpha Prop series steel props have been optimized to offer a strong, versatile, easy to use steel prop. • G-hook pinning connection at inner tube for quick height adjustment • Turn nut on the outer tube for fine adjustments • Two extension lengths available: Alpha B-300 and Alpha B-350 ForConstructionPros. com/21006464
ET-HP anchoring adhesive is a two-component, high-solids epoxy system for use as a high-strength, non-shrink anchor grouting material for threaded rod and rebar doweling into concrete and masonry. • Code-listed under current IBCR/IRCR for cracked and uncracked concrete per ICC-ES ESR-3372 and for masonry per IAPMO UES ER-241 • Can be used for horizontal, vertical and overhead applications ForConstructionPros.com/11577948
Bolt Star Square Foundation
The Bolt Star Square Foundation Edition is the first reusable anchor-bolt template for square forms and building foundations. • Marries yellow Bolt Star 30-in. tool with red Square Foundation Adaptors that snap on to the end of each Bolt Star arm • Measurements engraved into top of tool for fast, accurate set up involving 5- to 10-in. bolt square patterns • Hardware for secure fastening to 24-in. or larger forms • Wide arm openings • Integrated bubble levels ForConstructionPros.com/21046106
Stego Beast Form Stake
Part of Stego Industries' vapor barrier-safe forming system, the Beast Form Stake takes the place of old-style screed pad posts for interior forming applications. • Meets ASTME1643 • SpeedTrack Fastening Grooves allow you to place a screw or a nail anywhere along the length of the Form Stake • Durable and reusable • Composed of 100% virgin ABS • Length: 18 in. • Diameter: 3/4 in. ForConstructionPros.com/21086744
Neuvokas Corporation GatorBar
GatorBar is a composite fiber reinforced polymer rebar (FRP) made from polymer No. 3 rebar. • Can be tied into grids and easily carried for placement • Rust free and corrosion resistant • Higher tensile strength by replacing No. 4 steel with No. 3 GatorBar in flatwork • Two times stronger compared to traditional rebar • Seven times lighter than traditional rebar ForConstructionPros.com/12281401
Royal Building Products Form-A-Drain Plus
Form-A-Drain Plus is a 3-in-1 foundation solution that forms footings, provides an integrated drainage system and can be easily adapted to vent radon where needed. • Consists of lineal sections installed as the foundation footing forms • Stay in place permanently after completion of concrete pour • Forms a complete sub-slab perimeter loop around foundation ForConstructionPros.com/21063929
8 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_08-11_Forms.indd 8
10/10/19 9:13 AM
VAPOR BARRIER SAFE!
Improve efficiency and maintain concrete floor levelness with the BEAST SCREED SYSTEM!
INTRODUCING...
CONC1019_08-11_Forms.indd 9
10/10/19 9:13 AM
FORMS & REINFORCEMENT
Nudura Insulated Concrete Forms
Nudura ICFs offer an energy efficient and eco-friendly construction option. • Consist of two panels of expanded polystyrene foam connected with Nudura's patented web system made of 100% recycled material
Meadow Burke Concrete Construction Shims
Meadow Burke offers a full line of concrete construction shims designed to allow for quick and safe adjustments to uneven footings and panels. • Manufactured from durable, high-impact polystyrene • Will not rust or stain adjacent concrete surface • Compressive strength of 8,000 psi per ASTM-D695 • Available in 1/16-, 1/8- and 1/4-in. thicknesses and 3-in. x 3-in., 6-in. x 6-in. and 4-in. x 6-in. profiles • Sold in individual sizes or multi-size packs ForConstructionPros.com/21070719
Balco Inc. MetaFlex Pro Concrete X-Joint Fire Barriers
• Non-toxic fire retardant expanded polystyrene foam provides fire protection rating of up to 4 hours • Minimize potential formation of mold growth and draft paths • Available in a variety of types and sizes ForConstructionPros.com/21070731
The MetaFlex Pro family of fire barriers includes MetaFlex Pro 2 Hr, Metaflex Pro 3 Hr, Metaflex Pro Shear and Metaflex Pro Undermount. • Available for floor expansion joints up to 18 in. maximum open conditions • Meet all International Building Code (IBC) requirements and test standards for fire resistance and protection • Metaflex Pro 2 Hr and 3 Hr offer a single package installation with factory installed flanges that feature easy, drop-in convenience • Metaflex Pro Shear allows for up to 100% shear movement • Metaflex Pro Undermount offers a 2-hr rating from the bottom of the slab ForConstructionPros.com/21080692
FASTER INSTALL. MORE PROFIT.
“With GatorBar we don’t need a trailer to haul rebar to the job anymore. We just strap it to the ladder rack—it’s quick and easy.”
WE
We
Clay Palosaari, DP Construction
the all
to Joi con
(906) 934-2661
|
GATORBAR.COM
RE
10 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_08-11_Forms.indd 10
10/10/19 10:34 AM
WE DON’T JUST DABBLE IN CONCRETE AND MASONRY. We’re the authority on it. That’s why each year, WOC is the first and only annual international event to bring you all the new products & equipment, training and technology to get the job done faster and more profitably than ever before. Join us, and in just five days you’ll find everything you need to conquer the year ahead.
FEBRUARY 4-7, 2020 EDUCATION: FEBRUARY 3-7 LAS VEGAS CONVENTION CENTER LAS VEGAS, NV, USA
REGISTER TODAY worldofconcrete.com
CONC1019_08-11_Forms.indd 11
10/10/19 9:13 AM
M
PUMPS, PLACING & CONSOLIDATION Oztec BP-50a Backpack and RubberHead
Allen Engineering Power Vibe Series Vibrators
These concrete vibrators are lightweight but powerful and provide excellent consolidation of concrete. • Honda 1.5-hp GX35 • 1-ft. flexible shaft with rigid shaft extension • 2-in. steel vibrator head • 2-in. rubber vibrator head ForConstructionPros.com/20971167
Canycom SC45 Compact Concrete Buggy
The 463-lb. SC45 has rubber tracks and an overall width of 29 in. • Poly tub with 1,000-lb. maximum payload • 91-in. length and 45-in. height • Speeds up to 3.3 mph • 163cc Honda gas engine
The BP-50a backpack vibrator includes a Honda engine and a totally enclosed rotary throttle that eliminates improper setting of the engine speed and ensures optimum consolidation. • Clog-preventing kill switch conveniently located on the handle • RubberHead creates a stronger radius of action along its entire length, eliminating voids and producing a more dense concrete with a better finish ForConstructionPros.com/21024619
Multiquip MQ Whiteman WTB-16 Track-drive Power Buggy
The WTB-16 track-drive power buggy has an aggressive track pattern that enables it to travel through soft soils and muddy site conditions at speeds of up to 5.7 mph unloaded and 4.7 mph loaded. • Steel-embedded ladder track design and rugged undercarriage utilizing cast ductile iron guide wheels • Powerful drive motors offer failsafe braking • Polyethylene tub offers 16 cu. ft. of capacity • 22-hp Honda GX690 engine with 5-gal. fuel tank
Makinex Mixing Station
The Mixing Station is portable and lightweight, providing efficient hands-free mixing for self-leveling cements, compounds and epoxies. • Easy tilt operation ensures control and speed for precise pouring • Suitable for use with various stirrers/ mixers including the Protool Stirrer MXP1602E and Collomix XO6 Hand Mixer • Can mix batches up to 220 lb. in three minutes • Dust/splash reduction cover for safer use and less mess • Vacuum attachment on the lid • Weighs 40 lb. without mixer
L B
Th ho on A
ForConstructionPros.com/21045287
ForConstructionPros.com/20988957
ForConstructionPros.com/21045755
Liebherr 50 M5 XXT Concrete Pump Niagara Machine DiamaPro Dual Component Joint Pump
The DiamaPro Dual Component Joint Pump works perfectly with DiamaJoint Fill Plus; a polyurea control joint fill material. • Dispenses material at a 1:1 ratio • Ergonomic adjustable application wand • 10-gal. semi-transparent material tanks • Adjustable flow rate grip • Tool basket • Water resistant electrical box • Storage and strap down location for additional material • Application wand holder ForConstructionPros.com/21049771
The 50 M5 XXT integrates the latest technologies and capabilities, lowering the overall weight and optimizing product dimensions. • Multi-folding 5-section boom offers a vertical reach of 161 ft. and a horizontal reach of 146 ft. • Proprietary slewing ring and drive components • Powerful pump unit delivers an output of up to 213 cu. yd. per hour • Two long-stroke versions with a conveyance stroke of 2,000 mm ForConstructionPros.com/21047412
Smart Batch Automated Mixing System Powered by Perkins
Smart Batch Systems has redesigned its mobile automated mixing machine, giving customers a greater range of features like daily electronic reports to manage work at jobsites. • 4-cylinder, 4.4-liter, 110-hp Perkins 1204F engine offers multiple options for configuration to match its unique needs • Uses 16 premeasured bags lifted by machines and mixed electronically • Control and monitor the machine using a tablet • Wi-Fi connectivity provides real-time data on the machine’s performance ForConstructionPros.com/21066343
12 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_12-17_Pumps.indd 12
Explo
10/10/19 9:14 AM
Minnich Manufacturing
LIGHT HAS NEVER BEEN TOUGHER
The Stinger electric flex shaft motor has been designed to hold it’s torque in concrete under load, runs cool, and saves on vibrator head wear and tear. Rugged, agile, and depenable. A combination only found in a Minnich flex shaft vibrator.
Explore Our Entire Line of Vibrators WWW.MINNICH-MFG.COM
CONC1019_12-17_Pumps.indd 13
10/10/19 9:14 AM
PUMPS, PLACING & CONSOLIDATION
Bobcat Bob-Dock System
Somero SP-16 Concrete Placer and Hose Puller
These remote-controlled hose-handlers are packed with powerful engines and load-sensing variable-displacement hydraulics that moves lines with ease. • Remote-control • 2/4/Crab Steering • Load-sensing variable-displacement • LED Lights • Return-to-center Steering • Intelligent Steering – prevent stress/ damage ForConstructionPros.com/21027425
The Bob-Dock system is a hands-free hydraulic attachment mounting system designed for strong, easy and repeatable hydraulic connections without leaving the Bobcat compact loader cab. • Available for M2-Series T630, T650, T740 and T770 compact track loaders; S630, S650, S740 and S770 skid-steer loaders; and the A770 all-wheel steer loader • Line up the loader with the attachment’s Bob-Dock adapter plate and press the Power Bob-Tach switch inside the cab • System secures the attachment and automatically connects the hydraulics • Retract the Bob-Tach wedges and pull away when done using attachment • Standard couplers on lift arm can still be used with attachments not equipped with the adapter plate ForConstructionPros.com/21045451
Putzmeister VSP 70 Pickup Pump
The Vehicle Series Pickup 70 (VSP 70) concrete pump truck features a Thom-Katt TK 70 pump mounted on a Dodge Ram 5500 chassis with 19,500-lb. GVWR and 11.3-ft. side decks with folding side panels and a flat center deck. • 74-cu.-yd./hour maximum volume output • 1,130 psi maximum concrete pressure • Handles aggregate sizes up to 1.5 in. • 9.5-cu.-ft. hopper capacity • 100-hp Cummins QSF3.8 diesel engine ForConstructionPros.com/21045785
Minnich Stinger Concrete Vibrator THE WORLD LEADER IN SHAPED CONCRETE ROLLER SCREEDS! At Curb Roller Mfg. we are proud to produce quality products for everyday concrete work. Our portable, ergonomic machines not only make it easy to shape standard curb, gutter and sidewalks, but also flume, swale, v-gutter and other unique shapes. Don't want to rely on hydraulics for flatwork? Say goodbye to hoses, cords and fumes with the world's first battery powered roller screed! The Batt Screed utilizes a rechargeable 60-volt lithium-ion battery for impressive power and run time. Try one of our machines today and you’ll see how we are changing the way contractors around the world shape concrete!
Curb Roller Manufacturing
Website: www.curbroller.com Phone: 785-467-3132
The Stinger is a 14.5-lb. double-insulated universal motor that can drive the full line of Minnich vibrator shafts and heads from 3/4 to 2.5 in. • Available in 15-amp (115V) • Offers a speed range of 11,000 to 13,000 vpm • Standard quick disconnect • Durable protective frame extends vibrator life with urethane end caps that absorb shock while supporting easy to grip handles • Provides quiet operation meeting OSHA A 29 CFR 1910.95 standards ForConstructionPros.com/20986167
Worksaver SS-590 Skid Steer Mixer
The SS-590 Skid Steer Mixer features a direct hydraulic gearbox drive, which eliminates chain and sprocket maintenance. • 11-cu.-ft. drum to mix, transport and place 5 cu. ft. of concrete • Rugged all steel welded drum construction with internal angled paddles • Flow control valve for easy control of mixer speed • Simple lever to control engagement/disengagement of the drum ForConstructionPros.com/21063565
14 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_12-17_Pumps.indd 14
10/10/19 10:36 AM
CONC1019_12-17_Pumps.indd 15
10/10/19 9:14 AM
PUMPS, PLACING & CONSOLIDATION
GOMACO Xtreme GT-3600 Curb and Gutter Machine
The Xtreme GT-3600 curb and gutter machine is based on the GT-3600, with Xtreme steering and intelligence added to each track. • Rotary-sensored slew drives, sensored All-Track Steering and AllTrack Positioning, and smart hydraulic cylinders • Smart cylinders allow the G+ control system to know exact position of the tracks to make steering adjustments as needed • Individual track speed control • G+ control system interfaces with any of the major 3D guidance systems • Smart hydraulic cylinder for intelligent offset when telescoping and side shifting the mold mounting system ForConstructionPros.com/21035943
Cemen Tech DT-100 and DT-200 Dump Trailers
These new heavy-duty 1- and 2-yd. models are designed for use on small- to mid-size jobs for hauling concrete, sand, stone, mulch and other materials. • Fabricated with high-strength 10-gauge steel • Double-action hydraulic pump • Adjustable relief valve • Forward self-adjusting electric brakes • One-piece rubber splash guard and supporting tongue cross bars • Adjustable load-leveling hitch ForConstructionPros.com/21036745
Terex Bid-Well 3600RC Roller Paver
The remote control system on the 3600 RC Roller Paver provides additional convenience and enhanced communication between the operator, team members and concrete placer. • Capable of paving bridge decks, flatwork and roads with minimal set up time and increased flexibility • RC unit can control machine engine, power legs, machine and carriage travel speed functions • Operator’s console still functional as needed
Blastcrete Equipment RS180 Mixer-Pump for High-Volume Gypsum Applications
The RS180 is a user-friendly, economical option for gypsum flooring underlayment, grouting, cellular concrete and some wet shotcrete applications. • Adjustable 2L8 rotor-stator pump to tailor material flow to the job • 12-cu.-ft. hydraulic spiral mixer with gearbox drive • 55-hp Yanmar water-cooled diesel • Long distance and high volume pumping capabilities • Durable tubular steel framework • Dual axle trailer designed for long distance travel ForConstructionPros.com/21078821
ForConstructionPros.com/21067983
Wacker Neuson Reconfigured Internal Concrete Vibrators
Premium, Advanced and Basic categories for the internal vibration product line enables easy identification of the system best suited to provide proper consolidation for a particular job. • IRFUflex Premium modular high-frequency, high-cycle system contains one frequency converter power unit with several interchangeable vibrator head and hose length options • IEC Advanced high-frequency, high-cycle line comes in four fixed configuration models with an integrated frequency converter, 1.8- or 2.2-in. head diameter and 10- or 26-ft. hose length • Basic line includes the Head, Motor Shaft (HMS) flex shaft vibrator line with interchangeable flexible shafts, vibrator heads and universal motors • BV50A-H backpack vibrator with a comfortable harness system and a 50cc Honda gasoline engine also available ForConstructionPros.com/21046370
Schwing Revolution Boom for S 36 X Truck-mounted Concrete Pump
Schwing introduces a patented Revolution boom on the S 36 X truck-mounted concrete pump with continuous 360-degree articulation of the tip section and 330-degrees of articulation of the third section. • Hydraulic motors replace last two cylinders of four-section boom • 115 ft. 6 in. of reach • Compact X-style outriggers set-up with a 20-ft. 5-in. outrigger spread • 730-degree slewing range (365 left and 365 right) • Standard 2025H-5 pump kit offers 178-cu.-yd. per hour output and 23 strokes per minute • Boom operation is through the Vector Control system that provides wireless proportional joystick control ForConstructionPros.com/21050764
16 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_12-17_Pumps.indd 16
10/10/19 10:37 AM
DEC
GOL
LAS
DECEMBER 12-13 GOLDEN NUGGET
LAS VEGAS
SPARK YOUR BUSINESS GROWTH TWO DAYS OF POWERFUL TALKS
SHAWN VAN DYKE Profit First for Contractors! How to Guarantee Profits and Manage Your Cash at the Same Time
SEVEN INDUSTRIES THOUGHT LEADERS
JOSH FERGUSON
BART GRAGG
Trends in Construction Litigation: How to Deter (and Even Better, Defend) Your Company Against Claims
True North: Revisit Your Management Past to Improve Your Leadership Future
DAVE NELSEN
BRAD HUMPHREY
JOHN CHOATE
How to Identify Future Leaders and . . .What to Do When You Find Them
How to Create Elite Team Dynamics Using U.S. Navy SEALs Training
“Inbound” Marketing: Attract. Engage. Convert.
REGISTER NOW.
GARRET SULLIVAN How to Develop “Ownership Thinking” in Your Employees
IGNITECONSTRUCTIONSUMMIT.COM
FROM THE PRODUCERS OF:
CONC1019_12-17_Pumps.indd 17
10/10/19 9:14 AM
POWER TROWELS
By Amy Wunderlin
OmniPoly Power Trowel Blade As the popularity of polished concrete on large surfaces grows, so too does the demand for better tools.
T
here are two main types of power trowel blades: those made of high-carbon stainless steel and those made of plastic. Each comes with its own set of strengths and weaknesses. The patent pending OmniPoly Power Trowel Blade from the Valtec Group was created to combat those weaknesses.
Historically, power trowel blades have been made of a high-carbon steel. The downside to these blades is that the carbon sometimes transfers dark burnish marks on the concrete while finishing, which can become black and blotchy. Plastic blades were developed in the 1990s as an answer to that challenge, with further reinforced plastic blades entering the market in the mid-2000s. While these blades offer a more uniformed finish, they cost significantly more and still have some steel elements that can rust. In addition, the underside has a void or hole where the blades are assembled where concrete particles can accumulate and later fall out in the finishing process and cause scratching. Technically still a plastic blade, what sets the OmniPoly Blade apart is its
The OmniPoly blade provides a new alternative to traditional steel and plastic blades. Photo Credit: Valtec Group
continuous bottom, meaning no void for particles to accumulate. It’s also made entirely from a special “omnipoly material,” which Jeffrey Snyder, the blade’s innovator and founder of the Valtec Group, says is wear resistant and will not rust, rot or corrode because there is no steel in it. “This allows the contractor to install the concrete with a uniformed surface, so you do not get those dark burnish marks,” Snyder explains.
18 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_18-19_PowerTrowel.indd 18
10/10/19 9:15 AM
e
The blade's innovative thread protector keeps threads clean of debris. Photo Credit: Valtec Group
LONGEVITY OUTWEIGHS COSTS Many contractors associate plastic blades with their high cost and traditionally have used them with limited use. “They were used primarily where they were specified or the contractor wanted to produce a really good uniformed, aesthetic, pleasing surface,” Snyder says. Because of the longevity of this blade material, however, Snyder says the cost per square foot is now better than using steel blades. And because the blades last so long, you have fewer blade changes, meaning less labor and time for the equipment to be down. “Time is of the essence in the industry with the lack of labor right now. To have people going and changing blades is a half hour of labor time that they could spend doing something else,” Snyder says. He adds that this added longevity and better price per square foot equates to the OmniPoly Blade becoming an everyday finish blade. Steve Lloyd of Lloyd Concrete was one of the first contractors to trial the blade. And while the blade is not an everyday blade for him, he says it is a great addition to his toolbox. “When we do use them, they perform like a plastic blade, but it looks like I’m getting at least twice the use,” Lloyd says. After wrapping up a large paving job at an airport, he was especially impressed by the appearance of the OmniPoly Blade. “There was no wear on the blades. They looked like they’d hardly been used, and we had performed 40,000 feet of work,” he says. Currently, the contractor primarily uses the blade on industrial floors and some polished floor jobs. “They can be used on a lot of different jobs, but if it’s not polished or colored I don’t really use them,” he notes. And though the contractor is careful to note that the
product is still in the early stages, so far, he is pleased with its performance. “[The product is] still young…but what I like about it is the wear part. They’re expensive; all plastic blades are expensive, but these don’t wear out like other blades do. If you asked me if I would buy them again, absolutely I’d buy them again,” he adds.
Visit us at $365 EZ Screed World of Pro Two Concrete $434 EZ Screed Tool Booth Complete Set N2949!
SHIPPING INCLUDED
EZ
CALL TODAY!
937-884-0081
www.EZScreedTools.com ScreedTools.com Made in the USA!
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 19
CONC1019_18-19_PowerTrowel.indd 19
10/10/19 9:15 AM
SCREEDS & TROWELS Curb Roller HydraScreed HS3000
Ligchine SpiderScreed
The SpiderScreed is ideal for concrete placements on upper decks, residential applications, slab-on-grade and 3D surfaces. • Tubular aluminum main and screed head frame • Auger screed head or a smooth roller for multi-directional use • High speed electric actuators drive patented machine leveling system • Eaton keypad for operator controls and Parker MD4 7-in. touch-screen display for systems/diagnostic status • 20.8-hp Honda GX630 • 94-in. width • 69-in. length • Independent hydraulic front wheel drive system
The Hydra-Screed HS3000 has the weight and strength to move over 6 in. of concrete along the pour while allowing operators to remain in a standing position. • Screeds up to 30 ft. in length • Rubber inserts can be removed to accommodate any desired length of pipe, custom V-flume, crowned roller screed and other desired profiles • Two-way variable speed control • Single pin allows for direction change • Handles pivot into the desired position • Requires 3 to 5 gpm at 2,250 psi
Dragon Screed Skid-steer Attachment
The Dragon Screed concrete and gravel leveling equipment attaches to a skid steer, grading and screeding with 50% less physical labor. • Level subgrade and screed concrete on pours from 6 to 22 ft. wide • Can be configured to work on sides or in front of the loader, in forward or reverse • Wireless remote control to select from five vibration speeds • Wide floats, each with a vibrator attached, drag smoothly behind the screed bar • Hydraulic pivot allows pouring on a pitch or from an uneven surface ForConstructionPros.com/21043528
According to Multiquip, the 180-lb. MQ Whiteman J3036H55 power trowel is the first to allow contractors to convert between 36- and 30-in. guard-ring diameters to fit job requirements. • Unique, sectional, ABS plastic rotating guard ring • Four-blade spider assembly with centrifugal clutch and a rotor speed of 60 to 115 rpm • 4.8-hp Honda GX160 engine • Large oil-capacity gearbox • Available with a QuickPitch or knob-style pitch control ForConstructionPros.com/21043766
The 10-ft. CRT60X (CRT60-74LX) features six blades per rotor, a width of 123 in., high blade speed, hydraulic blade pitch, two-speed engine throttle and a large 12-gal. fuel tank. • 74-hp Kohler, nonDPF Tier 4 Final engine • Dual mode power steering system • Electronic cruise control, adjustable seat, ergonomically positioned arm rests and joystick controls ForConstructionPros.com/21024077
Su S
HoverTrowel
HoverTrowel Inc. manufactures patented lightweight power trowels designed specifically for finishing polymer toppings. • Weighs less than 50 lb. • Interchangeable pneumatic and 4-cycle engines • Trowel path can be changed from 25 and 34 in. with a variety of blades and floats • Adjustable handle can be set at 6 different positions • Can be used for epoxies, urethanes, polymer modified, EPDM and many hybrid toppings
Slo S
ForConstructionPros.com/21024663
EZ Screed Tool
The EZ Screed Tool used in an upright position is faster and more effective in the leveling of concrete, resulting in a more precise and professional finish to your concrete job. • Designed for driveways, walks and slabs of various sizes • Powder coated steel handle • Quality aluminum blades • Comfort textured grips and ergonomic design • Lightweight and durable • EZ clean-up ForConstructionPros.com/12007748
20 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_20-23_ScreedsTrowels.indd 20
Co C
ForConstructionProscom/21062138
ForConstructionPros.com/21083055
Multiquip MQ Whiteman J3036H55 Trowel
Wacker Neuson CRT60X Hydraulic Ride-on Trowel
T
10/10/19 12:28 PM
Tro Tr
The Leaders in Roller Screed
INNOVATION!
Conical Conical
Residential Residential
Elevated Deck Elevated Deck
Super Flat Super Flat
Circular Circular
Tilt-Up Tilt-Up
Slope Slope
Faster Pours Flatter Concrete Fewer Crew More Profit “Compromise Somewhere Else”
Visit us at VisitBooth us at # WOC WOC Booth # O31100 and the O31100 and the ConExpo ConExpo Booth # S65307 Booth # S65307
Trolley System Trolley System
Phone: 701-281-8989 Fax: 701-281-8995 Email: mailto:sales@luraconcretescreed.com
http://www.lurascreed.com CONC1019_20-23_ScreedsTrowels.indd 21
10/10/19 12:29 PM
SCREEDS & TROWELS
Wire Brush Rotary for Power Trowels
Valtec Group LLC announces wire brush rotaries for use on power trowels for scrubbing and stripping. • Primary uses include removing curing compounds, acrylic sealers and bond breakers • Great for cleaning casting floors after lifting tilt-up panels • For use on walk-behind and ride-on power trowels ForConstructionPros.com/21063240
Somero Sky Screed 25 Knuckle Boom Laser Screed
The Sky Screed 25 is the first Knuckle Boom Laser Screed machine to allow screeding on structural high-rise and slabon-grade applications. • Upper frame and screed head rotate 360 degrees • Auger-less screed head allows for screeding in any direction • Vibrator motor consolidates the concrete • OASIS laser-control system controls elevation • 32.5-hp Kubota gasoline engine with electric start • All machine functions controlled via wireless remote control ForConstructionPros.com/21044855
Packer Brothers PB36
The Packer Brothers 36-in. power trowel PB36 features convenient blade access for cleaning and changing. • Rapid Pitch adjustment and smooth operation • Set of complimentary blades ForConstructionPros.com/20992839
Wyco Screed King
The Screed King features a unique magnesium power bar and power transfer system that produces a high frequency vibration to eliminate the honeycomb effect and speed concrete finishing time. • Available in a variety of configurations, with multiple board lengths that can be removed without tools ForConstructionPros.com/12321936
Lura Roller Screed System
The Lura Roller Screed System is the only roller screed that allows you to add one tube onto the next. • Contractors Package includes 44 ft. of screed tube that can change into over 15 different combinations ForConstructionPros.com/21023848
Allen Engineering MSP465 Riding Trowel
Husqvarna Hipertrowel Floor Polishing System
The 8-ft.-class, mechanically driven MSP465 riding trowel with a 57-hp Kubota WG1605 liquid-cooled gasoline engine is suited for high-volume flatwork concrete. • Twin 46-in. rotors with five-bladed spiders • Digital readouts with bilingual digital display • Helical gearboxes maximize torque at high rotor speeds • 12-gal. fuel tank • Includes a two point, top-mount lifting system and four-point tie-downs
The Husqvarna Hipertrowel system was designed for contractors who need to polish a large, unobstructed and relatively flat area quickly. • Six-step wet polishing process along with three optional final steps • Complete set-up includes Husqvarna Hiperflex TRW tool pads, chemicals, Hipertrowel gryo drivers, power trowel attachments, squeegee vacuum and a hose connected to a tap • Hipertrowel gyro driver and Hiperflex TRW tool pads designed for maximum flexiblity in all directions • Strong magnets securely mount Hiperflex TRW tool pads underneath Hipertrowel gyro drivers
ForConstructionPros.com/21061945
ForConstructionPros.com/21067294
22 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_20-23_ScreedsTrowels.indd 22
10/10/19 12:35 PM
ONE-PASS POWERHOUSES
When it comes to slab-on-grade, we’re talkin’ serious work ethic. Our award-winning boomed screeds are designed to help you do more with less. Make major efficiency gains on the projects where quality and reliability matter most.
Get it Done. Get a Somero®.
CONC1019_20-23_ScreedsTrowels.indd 23
®
WWW.SOMERO.COM o r ca l l 23 9 . 2 1 0 . 6 5 1 9
10/10/19 12:29 PM
DECORATIVE CONCRETE NEW PRODUCTS McKinnon Miracle Glaze H20
Miracle Glaze H20 is recommended for use in hangers, service bays and warehouse floors where light reflectance, chemical and abrasion resistance are required. • Two-component • Water-based aliphatic urethane • Superb satin gloss retention • Virtually zero VOC's • Odor-free • Yields 4 mils coverage at 250 sq. ft. per kit ForConstructionPros.com/12028319
Kingdom Products Imperial Core Bond
Imperial Core Bond is a multi-use polymer modified cement-based product designed for use as a basecoat over EIFS applications and mortar substrates. • Can be used as an adhesive for applying pre-manufactured, lightweight stone veneer • Can be used as a structure coat over irregular shaped foam core designs ForConstructionPros.com/21072867
Foundation Armor LV25 Solvent-based Acrylic Concrete Cure and Seal
The Armor LV25 is a solvent-based acrylic cure and seal that when properly applied will help reduce premature moisture loss and reduce deterioration caused by surface abrasion, foot traffic and spills. • Meets or exceeds ASTM 1315 and ASTM C 309 standards • Can be applied to existing concrete and paver surfaces • Creates UV resistant, breathable high gloss finish ForConstructionPros.com/12308938
Butterfield Color TEC FILM Topical Evaporation Control
Butterfield Color‘s TEC Film Topical Evaporation Control protects concrete from the effects of excessive moisture loss in rapid drying conditions such as low humidity, elevated temperatures or brisk winds. • Reduces surface cracking at the edges of grout lines when stamping concrete • Available in a 3-lb. concentrate and a 5-gal. Ready to Use pail ForConstructionPros.com/20996839
Pre
EP
Ken high mark tech begi
Our envir work insta help outd
We selec savin
Call Insta McK
Ameripolish ColorJuice Extreme
Premium Sealers for Decorative Concrete and Flatwork Made in Springfield, IL by Solomon Colors www.brickform.com • (800) 624-0261 • www.solomoncolors.com
Ameripolish ColorJuice - Extreme is the ColorJuice 3D reformulated to give you a stronger, more vibrant and longer lasting color. • Can be used in horizontal and vertical applications • Can be used on exterior and interior concrete
Industria
$.70 per
ForConstructionPros.com/20982977
McK O and Su
24 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_24-28_DecCon.indd 24
HE
10/10/19 10:19 AM
$.70 per sq. ft.
Premium Pr u ts at the Best Pri e Available
McKrete™ Concrete Overlay System
We offer free technical support, the largest in-stock epoxy stone selection, discounted freight shipping in orth America, and special savings with volume shipments. Call us today for a free materials estimate or visit us on acebook and Instagram to stay up to date with all new developments pertaining to McKinnon Materials!
| 1-866-622-7031 | | WWW.MCKINNONMATERIALS.COM | @MCKINNONMATERIALS
HEADQUARTERS: 5612 56TH COMMERCE PARK BLVD. TAMPA, FL 33610
Industrial Epoxy and Aurora Epoxy Dust
$.70 per sq. ft.
McKrete™ Concrete Overlay System and Super Vinyl Supreme
CONC1019_24-28_DecCon.indd 25
$2.30 per sq. ft. delivered
River Rock Flooring System
$1.30 per sq. ft. delivered
Industrial Epoxy, Aurora Epoxy Dust, and High Performance Urethane
$.70 per sq. ft.
McKrete™ Concrete Overlay System and Crystal Coat Sealer
E-Z Coat- Table Top Epoxy
$.86 per sq. ft. delivered
Our premium products have withstood some of the harshest environmental conditions and held up in the most challenging of work spaces. All of our materials have been designed for original installation, as well as for rehabilitating existing areas. Our products help bring a unique look to residential communities, retail floors, outdoor decks, restaurants, and many other locations.
White Industrial Epoxy and Polyaspartic Urethane
$.94 per sq. ft. delivered
Ken McKinnon, President of McKinnon Materials has provided the highest quality of products at the most affordable prices in the market place for over %& years. Our experienced multinational technical team delivers unparalleled service for customers from the beginning to end of new pro ects.
$29.00 per gallon
EPOXY | NATURAL STONE | URETHANES | SEALERS | OVERLAY
Industrial Epoxy and Aurora Epoxy Dust $2.30 per sq. ft. delivered
River Rock Flooring System
10/10/19 12:39 PM
DECORATIVE CONCRETE
Sundek SunLastic Waterproofing System
The SunLastic line by Sundek takes the proven and reliable technologies of synthetic rubber emulsions and partners it with Sundek’s decorative concrete coating systems. • SunLastic WP50 is a single component elastomeric waterproofing membrane that forms a monolithic, tightly adhering and molded water-proofing membrane across floors, up cove bases, curbs and other areas • WP50 can be top coated with Sundek’s line of decorative concrete coatings ForConstructionPros.com/21072856
Lythic Solutions Duet Colors
Duet Colors are water-based dyes that are specially formulated to be mixed into Lythic Densifier for deeper penetration and more effective bonding. • Non-flammable, eliminating the hazards of solvent-based dyes • Free of solvent odors • Available in 25 colors that enhance and showcase the natural character of the concrete
Trinic Complete Blended GFRC Pre-Mixes
Trinic’s Complete Blended GFRC Pre-Mixes are pre-blended and feature a unique HD anti-crack fiber for an extra strong face coat. • For a simple pour with GFRC the ECC/SCC pre-mix is designed to just add water and extra fiber ForConstructionPros.com/21015242
ForConstructionPros.com/10565615
26 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_24-28_DecCon.indd 26
10/10/19 10:19 AM
PROSOCO Liquid Integral Colors for Concrete Overlays
PROSOCO's Integral Color for Overlays is a pre-measured, concentrated liquid to integrally color cement mixtures for overlays and polishable overlays. • Available in 9 colors • Blends easily for uniform and consistent colors • UV-resistant • Water-based liquid formulation • VOC-compliant, non-flammable, non-toxic, non-corrosive and low odor • For use indoors or outdoors • Available in 10-oz. packages ForConstructionPros.com/21085762
KOSTER LevelStrong and LevelStrong High Strength
KOSTER LevelStrong and LevelStrong High Strength Self-Leveling Underlayments offer 30 minutes working time, are low VOC, and boast a dense, smooth, hard surface. • Final flooring can be installed in as little as 16 hours • LevelStrong High Strength’s 6,000 psi makes it ideal for demanding environments ForConstructionPros.com/21024779
Keystone Three-sided Murino Wall System
Designed with three finished sides on each unit, the Murino wall system offers additional design capabilities for retaining walls up to 3-ft. high, parapet walls, pilasters, columns and stairs. • Each unit is manufactured with both a 90-degree angle and a tapered angled side • Textured sides interlock, aligning the installed units and creating tight joints that block daylight on a freestanding wall • Keystone pinned connection system adds strength and easier installation
Insta LATI cem appe surfa • • • • • • • www
ForConstructionPros.com/21064817
STIFEL
SHIELD YOUR CONCRETE
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 27
CONC1019_24-28_DecCon.indd 27
10/10/19 10:19 AM
DECORATIVE CONCRETE
Brickform Concrete Dimensions Reusable Urethane Stencils
Brickform - a Division of Solomon Colors’ Concrete Dimensions are floated into fresh concrete and work ideally with exposed aggregate, smooth troweled, broom finished and lightly stamped surfaces. • Custom designs available • Basic sets include the Celtic Knot and Trinity sets as well as the Compass Rose Wide and Compass Rose Narrow medallions • Basic sets include a center piece, corners, linear borders and corner pieces ForConstructionPros.com/20992832
Pecora-Deck 800 FC
Durable Pecora coating systems deliver resilient protection against the elements and traffic, whether it’s for maintenance, restoration or a new structure. • Two-component • Fluid-applied, fast cure, polyurethane multi-coat system • Abrasion and wear protection • Defends against UV damage, airborne chlorides and freeze-thaw • High solids, low odor for exterior and interior applications • Low VOC • Field tintable • Available in factory premixed standard colors and non-standard colors ForConstructionPros.com/20990940
Nox-Crete Duo-Shield and Tri-Shield Sealers
Nox-Crete Products Group’s two new combination water-repellants and membrane forming sealers combine a deep-penetrating silane and a low molecular weight acrylic resin to seal concrete from the damaging effects of deicing salts and freeze/thaw related scaling, and provide stain protection. • Tri-Shield can also be used as a curing compound on freshly placed concrete • Duo-Shield is used as a sealer on existing concrete only • Resist oxidation and yellowing when exposed to exterior conditions • Water vapor permeability and resistance to blistering ForConstructionPros.com/21026972
28 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_24-28_DecCon.indd 28
10/10/19 10:43 AM
POLISHING PRODUCTS Duraamen Param 6000
CureCrete CreteClean Plus – Single Dose
Param 6000 is a polishable selfleveling concrete topping used for creating highly durable designer concrete flooring for residential and commercial spaces. • Available in grey and white base which can be integrally colored with Colorfast colors or sprayed with DESO dyes ForConstructionPros.com/12056969
CreteClean Plus – Single Dose conditions and enhances regular, densified and densified-polished concrete floors by removing contaminants and leaving behind no residue. • 500 sq. ft./gal. coverage rate • Available in cases of 12 bottles or master cases of 48 bottles • Suitable for use in food handling establishments ForConstructionPros.com/12249397
Pearl Abrasive Hexpin Floor Preparation System
The Pearl Hexpin System is engineered for use on standard floor buffers and dual-headed diamond grinders. • Use standard Hexpin Plates or Hexpin Blocks with the patented system of interchangeable Hexpins for grinding, sanding, polishing and coating removal • Spring-based technology allows Hexpin attachments to float over rough surfaces while the fluted plate design helps maintain dust control ForConstructionPros.com/20983118
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 29
CONC1019_29-35_Poishing.indd 29
10/11/19 8:44 AM
POLISHING PRODUCTS
Laticrete Supercap SC650-MC Self-Leveling Underlayment
Laticrete's Supercap SC650-MC is a fine-sanded, pumpable and pourable, low alkali cement-based, selfleveling topping that is suitable as a high-strength wear surface or underlayment. • Flattens floors while producing durable and low maintenance finished wear surface • Surface is walkable in just two to four hours and polishable in 24 hours • Apply finished flooring goods as soon as one day after application • Produces a coarse salt and pepper look that can be left as is or tinted with dye • Inorganic and will not contribute to or harbor the growth of mold or mildew • Available in a 2,500-lb. bulk super sack designed to pump through the Supercap Mobile Blending Unit for large projects or can be ordered in 50-lb. bags ForConstructionPros.com/21077900
SASE PDG 5000P 20-in. Planetary Floor Grinder
The PDG 5000P features a 20-in. grinding width and is powered by a Gx390 Honda Engine. • Connects to SASE BULL dust extractors for dust-free operation • Operator friendly control panel • Flexible grinding heads • Includes both metal bond QCS and resin bond flex plates ForConstructionPros.com/12299009
EZ Polish System
EZ Polish System consists of three chemicals and three tools for a concrete grinder. • Polish concrete with exact and constant results every time • Robust and U.S.-based customer service experience to help troubleshoot or educate your workforce on this system for concrete polishing • Use RA (Roughness Average) Meter to measure results ForConstructionPros.com/21024616
30 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_29-35_Poishing.indd 30
10/10/19 2:14 PM
complete solutions for floor grinding, polishing and maintenance
We manufacture a wide range of tooling options for every job from prep and removal to daily maintenance. We have added a variety of hybrids and resins to our Quick Change tooling portfolio, so you can work faster and more efficiently.
Visit www.superabrasive.com to learn more.
CONC1019_29-35_Poishing.indd 31
10/10/19 2:11 PM
POLISHING PRODUCTS
ASL Machines RC PRO 9
Wagman Metal Products Metal Diamond Tooling for GHP System New metal tooling with grit levels 40, 70 and 150 have been added to the Wagman Revolution GHP System. • Durable metal bond is aggressive while lasting much longer than the hybrid tooling • 40 metals will help process the medium to large aggregates while the 150 metals will stay more in the cream • Metal tooling can be used on 36and 46-in. walk-behinds as well as 6and 8-ft. ride-on power trowels • 11-in. size can be used on the Wagman LP230
The ASL RC PRO 9 is a 30-in. remote control propane grinding and polishing machine with a 27-hp propane Briggs and Stratton motor. • Remote control allows users to run vacuum and watch the grinding patterns all while the RC PRO 9 is running itself • Set numerous RC PRO 9 machines at the same speed across the floor for consistent, evenly ground concrete ForConstructionPros.com/21046363
Euclid Chemical Company/Increte Systems Level Top PC-Agg
Level Top PC-Agg contains a graded natural aggregate that enables the topping to resemble a polished concrete floor after grinding and polishing. • Excellent adhesion and durability • High early strength enables polishing just 24 hours after placement • Perfect for polished countertops, tables and other poured-in-place or precast applications in addition to flooring ForConstructionPros.com/21024792
ForConstructionPros.com/20999141
Lythic Polished Concrete Products offer a complete flooring solution with unique colloidal silica technology.
RC PRO 9 30” REMOTE CONTROLLED PROPANE GRINDER
www.ASLMachinesUSA.com | info@ASLMachinesUSA.com | (866) ASL- 0446
100% reactive silica ensures the concrete is chemically hardened prior to mechanical polishing. Use Lythic Densifiers, Protectors, and Cleaners for long lasting performance. For more information, visit www.lythic.com
www.solomoncolors.com • www.lythic.com 800.624.0261
32 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_29-35_Poishing.indd 32
10/10/19 2:15 PM
EDCO TMC-7 – 7-in. Magna-Trap Turbo Edge Grinder Rigid and flex head is ideal for: • Leveling uneven expansion joints, high spots • Smoothing rough surfaces, rain marks or trowel marks • Remove coatings, build-ups, resins and more • Grind/Polish against any vertical surface walls, corners, columns and tight areas • Pair with any larger polishing machine • 4-position handle and shroud allows maximum control and coverage
ForConstructionPros.com/21027640
CTS Cement TRU Products
TRU Self-Leveling, TRU PC Polished Concrete and TRU Gray are formulated with Rapid Set Cement and delivers speed, strength and durability. • Ideal for floors that are stained, integrally colored and decorative embedded aggregate flooring • Contains extremely low amounts of polymer, • Allows for foot traffic in 2 to 3 hours, epoxy coating in 12 hours, and wet or dry grinding in 24 hours ForConstructionPros.com/21024404
Reliable Diamond Tool
In the year 2000, Reliable Diamond Tool, Inc. (ReDiToo) established sole representation for Precision Metallurgy. • RDTI stocks a wide variety of specifications for all materials used in concrete construction, including the stone and terrazzo industries • RDTI offers sales, consulting, instruction and field training of the proper use and care of diamond tooling, including the proper use and care of sawing, drilling, grinding and polishing equipment ForConstructionPros.com/21024430
Precision Diamond Tools for Construction: • Asphalt • Cured Concrete • Green Concrete • Brick-Block • Marble Granite • Terrazzo • Stone • Cup Wheels • Grinding Heads • Sawing & Drilling Equip.
www.reditoo.com • 877-938-2523 www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 33
CONC1019_29-35_Poishing.indd 33
10/10/19 2:11 PM
POLISHING PRODUCTS
SpecChem SpecGuard High Gloss Concrete Protectant/Polish
SpecGuard contains water-based polymeric protectant that improves the appearance and durability of concrete floors. • Cross-linking nano-technology aids penetration and adhesion creating a tough, stain-resistant coating • UV absorbers protect colored or dyed concrete against UV degradation • Does not require buffing • Retains high gloss under scrubbing • Safe to use—water based, low odor • Meets all federal VOC requirements ForConstructionPros.com/12134010
BORIDE Dry Resin Line
BORIDE Engineered Abrasives added an additional tool to its concrete/terrazzo floor polishing lineup, the BSD dry resins. • Resins attach by Velcro and come in three grits: 400, 800 and 1500 • Two sizes offered: the 3 in. is standard; the 2 in. is preferable for machines less than 350 lb. and is available by special order only • Testing showed resins performed consistently well on soft to very hard concrete with average life from 6,000 to 8,000 sq. ft.
M P
M S a
ForConstructionPros.com/21062495
F
Diamatic Velox T-2440 Trowel
The Velox T-2440 features a 31-hp Kubota LP engine, hydraulic assist steering, 10 grinding heads, 40 diamond tooling positions and patent pending true driven planetary design. • Couple with Silex specialty wet polishing chemistry for unique and effective solution for new construction concrete polishing ForConstructionPros.com/20992256
S L
T i o p t c 3
Concrete Grinding & Polishing Down to a Science!
TOOL 1
TOOL 2
TOOL 3
WE CAN HELP! Lavina Concrete Grinders and Polishers and DiamaPro UV coatings give you the ultimate protected concrete floor.
UV-HS
The combination of Lavina equipment and DiamaPro UV-HS coatings have proven to produce a floor that can undergo extreme physical and chemical wear. This floor system cures instantly, will not chip, and is easy to install.
Make your floors shine, call
EZPolishSystem.com | info@EZPolishSystem.com | (844) 376- 5474
www.niagaramachine.com
34 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_29-35_Poishing.indd 34
10/10/19 2:20 PM
F
Metabo High Torque Dry Polishers
Metabo Corporation is now offering two new Variable Speed High Torque Dry Polishers: the PE 15-20 RT and PE 15-30. • VTC electronics (vario-tacho-constamatic) maintains RPM under load • Overload protection keeps the motor from overheating • Soft start feature allows for smooth start-up • Restart protection prevents the tool from starting on its own in the event of a power interruption • Electronic winding temperature monitors with LED displays
Ameripolish CFE 2000
Ameripolish CFE 2000 is the latest cleaning solution designed to break down the toughest and most troublesome stains. • Eco-friendly and comes in a concentrate intended for automatic scrubber use • Breaks down organic material • Removes salts and minerals that can cause efflorescence ForConstructionPros. com/21027458
ForConstructionPros.com/21066223
GranQuartz Surface Pro Assassin 10-Segment Polishing Pads
GranQuartz's 10 segment grinding discs are engineered with a versatile connection hole pattern and pins for use on a wide range of grinding equipment. • Optimal grinding for wet use • Medium or soft bonds • Grits from 30 to 100 ForConstructionPros.com/21089325
Superabraisve Lavina Elite
The Lavina Elite Series includes a complete range of electric and propanepowered grinders from 13 to 32 in. and two remotecontrolled grinders in 25 and 32 in. • HMI touch screens provide essential operating information such as power consumption, machine load, hours worked, and tool holder rpm • Option to choose rpm setting with tool input, water supply and lights activation, maintenance reminders, password lock, etc. • Redesigned frame for superior maneuverability and easy tool changes • Dust-proof grinding head for increased life of internal components • Integrated weights for adjusting the grinding pressure • Fine misting system for dust suppression • Upgraded water pump • Improved dust collection • Floating skirt with a flexible brush • Adjustable LED lights in the front and back of machine • Phone charging station with a phone holder and dual USB port 2.0 • Durable stainless steel cup holder ForConstructionPros.com/21089325
info@GelMaxxUSA.com I {855) 322 3335 I GelMaxxUSA.com
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 35
CONC1019_29-35_Poishing.indd 35
10/10/19 2:12 PM
SURFACE PREP & DUST EXTRACTION General Equipment VS220 Portable Vacuum System
The VS220 portable vacuum system offers an effective dust control system for use with surface grinders, planers and other surface preparation solutions. • 99% efficient at 0.5 micron pre-filter and a 99.7% at 0.3 micro HEPA secondary filter • Two 115-VAC, 60-Hz single-speed electric motors produce a peak of 2.6 hp, air flow volume of 220 cfm and water lift suction of 110 in. • Separate 2- and 3-in.-diameter dust port connections for simultaneous or independent operation • Foot-operated hopper release lever enables simple emptying of the 12.5-gal.-capacity hopper ForConstructionPros.com/20974042
Paxxo Longopac Dust Collection Bag System
Dust is collected in a closed bag system, which is sealed without needing to be opened. • Vacuum cleaner loaded with folded 75-ft. bag cassette • Bags are sealed at exactly the same size as the waste ForConstructionPros.com/21075321
Pulse-Bac Vacuum Systems PRO-Series Line of Vacuums
Pulse-Bac Vacuum Systems’ PRO-Series line of vacuums for silica dust control, jobsite clean up and more. • New hood, fuse moved to outside nameplate for quick and easy replacement and new valve design for controlling the pulsing technology • Control board controls filter pulsing, tank sensors, remotes and electrical • Heads will fit the existing 1000 series 20-gal. tanks, Extenders and Baggers ForConstructionPros.com/21047209
Steam Jenny Belt-drive Cold Pressure Washers
These four models of belt-drive cold pressure washers are available with pressure ratings between 3,000 and 4,000 psi and flow rates between 3 and 4 gpm. • Powered by 9- or 13-hp Honda GX Series engines • Thermal pump protection, unloader valve and a high-pressure relief valve prevent damage to the pump • Include a professional-grade insulated trigger gun with safety lock, quick-connect nozzles with nozzle control and high-capacity in-line water strainer ForConstructionPros.com/10629341
Blastrac BDC-23 Mid Size Dust Collector The Blastrac BDC-23 is equipped with a Longopac bagging system, which is easy to mount and handle.
Gelmaxx
Gelmaxx products are designed for concrete cutters, polishers, masons and companies that have excess waste water. • Gelmaxx AQUAmaxx is a proprietary blend with additives that separate suspended solids from processed water • Gelmaxx Eco-Quickgel absorbs liquid solids into a safe material that can be disposed of immediately in any standard waste container
• Equipped with M-class star filter • Suited for use with medium shot blasting, grinding, polishing and scarifying machines • Robust wheels with brake systems
ForConstructionPros. com/12281013
ForConstructionPros.com/21033220
Wacker Neuson AP1850e and AP1840e Battery-powered Plates
The AP series battery-powered plates come in 19.7-in. (AP1850e) or 15.8-in. operating widths (AP1840e), and are available with a water tank and sprinkling set for asphalt applications. • Push button start and charging indicator light on the battery • Electric motor mounted directly on the baseplate • BP1000 lithium-ion battery system • Battery management system protects against overcharging ForConstructionPros.com/21045599
MBW GPR65, 68 & 77 Reversible Vibratory Plates
The small reversible plates were designed not only for narrow trenches and confined areas but also with reliable shifting in mind. • Shift travel direction at constant speeds • Both the GPR65 and GPR68 have travel speeds up to 92 ft./min. with amplitudes of .072 and .071 • GPR77 produces amplitude of .066 in. with travel speed up to 86 ft./min. • Plate sizes of 15, 18 and 22 in. • Honda GX160 and Honda GX270 engines • Generate 6,000 (GPR65, GPR68) and 7,775 lb. of centrifugal force • Compact lifts up to 22 in. ForConstructionPros.com/21047585
36 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_36-37_Surface.indd 36
10/10/19 9:24 AM
Chicago Pneumatic Dust Collection System
Chicago Pneumatic Power Technique (CP) CDP 10 dust collection system kit includes a vacuum suction unit, 21-ft. suction hose, universal shroud connector, three dust collection bags and three bellows. Also featured is a new control board to control filter pulsing, tank sensors, remotes and electrical. • System consumes 25 cfm per tool and has vacuum suction capacity of just over 4 ft. of water • Filter has the capacity of 99.58% filtration of exhaust air • Filter cleaning mechanism enhances filter life; vacuum indicator notifies operator of a clogged filter • At the bottom of the unit are retractable strainers, holding a recyclable eco-friendly dust collection bag in place • Available as trolley-mounted version ForConstructionPros.com/21046367
LAVINA V25G-X and V20G-X Propane Dust Extractors
Superabrasive’s Lavina V25G-X and V20G-X allow contractors to be completely independent from the electrical specs on the jobsite. • V25G-X features automatic filter cleaning, integrated pre-separator, adjustable cleaning interval, conical main filter, and a Hepa H13 filter rated at 99.99% at 0.3 microns; 294 cfm and 120 in. of water lift • V20G-X model offers 212 cfm and 112.5 in. of water lift; conical filter and Hepa H13 filter with manual filter cleaning ForConstructionPros.com/21033223
Aquajet Systems Super Lance 3000
Aquajet Systems AB’s Super Lance 3000 replaces the previous lance and allows contractors to use a single lance for any pressure up to 43,500 psi. • Modular system can be assembled in a number of configurations for any application • Standardized ends allow components to attach in any direction • Uniform threads and seals and multiple fittings for different hoses • 1/2-in. bore-through hole and no change in diameter, helping water enter the nozzle without turbulence and not lose power • Lance lined with ceramic, reducing wear on the lance • Ceramic nozzle ForConstructionPros.com/21047585
SIZE MATTERS That’s why Pulse-Bac has a wide array of vacuum sizes and configurations to match your job. So whether you have a 7” Hand Grinder or a 36” Planetary Pulse-Bac has Your Back!
Superior Technology Pulse-Bac’s Patented technology keeps filters clean, so suction stays consistent. Other vacuums can lose up to 50% of their suction as the filter clogs but not Pulse-Bac.
• CFM from 150-690 • Longopac, Tank or Drum • OSHA Compliant • HEPA Filtration D S I GNE
ND
BU I LT
IN E R I CA
DE
A
AM
NEVER STOP TO UNCLOG A FILTER AGAIN!
CLEAN AMBIENT AIR
DIRTY AIR
www.pulsebac.com 9384 Ridgeview Tulsa,OK 74131 • 866-954-9700
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 37
CONC1019_36-37_Surface.indd 37
10/10/19 9:24 AM
SAWING & DRILLING iQ Power Tools Arrayed Diamond Blades
MK Diamond MK-1800 Portable Concrete Saw
The Q-Drive 16.5-in. iQ Arrayed Diamond Blades are optimized to cut materials from hard brick, hard concrete and stone products. • When one row of diamonds begins to wear out, there is a second row right behind it • “Cool Cut Technology” is a proprietary composition of diamond concentration, metal type and flange thickness that cuts cool while reducing vibration and movement • Built-in vacuum system removes cutting debris ForConstructionPros.com/21081896
Hilti TE 60-A36 Cordless SDS Max Combihammer The TE 60-A36 cordless SDS max combihammer is powered by a 36-volt battery platform, enabling it to deliver a hammering frequency of 3,300 impacts per minute. • Brushless motor for high performance and efficiency • Active Vibration Reduction and Active Torque Control protects the user, tool and insert ForConstructionPros.com/21043586
Brokk MMB326 Rock Drill
The MMB326 hydraulic drifter rock drill attachment from TEI Rock Drills pairs with the Brokk 300 and allows for drilling of up to 3-in. holes in concrete, rock and compact soil.
• Delivers 200 ft.-lb. of impact energy at 3,480 bpm • Comes in 5.9- or 7.8-ft. mast lengths • Produces 250 ft.-lb. of torque • Rotation speeds of up to 250 rpm • 360-degree positioner for drilling in a variety of positions ForConstructionPros.com/21071968
Milwaukee M18 FUEL Rotary Hammer with ONE-KEY
The M18 FUEL 1.75-in. SDS Max rotary hammer with ONE-KEY generates the power of a 15-amp corded hammer and features an electromagnetic clutch. • Capable of chipping a 1/2-ton of material per charge when equipped with the M18 REDLITHIUM HIGH OUTPUT HD12.0 battery • AUTOSTOP electromagnetic clutch kicks in during lock-up to prevent over rotation for safer drilling and demolition • ONE-KEY enables users to track, manage and secure the hammer through the app on a mobile device ForConstructionPros.com/21063626
Husqvarna K 535i Batterypowered Cutter
The K 535i battery-powered cutter builds on its fuel- and electricpowered equivalents with added benefits such as low vibrations, low weight and user-friendly ergonomics. • Use for wet or dry cutting • Centered-placement of blade provides increased stability and control • Electric blade brake can stop blade rotation from full throttle to zero in 3.1 seconds • Intuitive keypad for quick command and features a save function • Side-fed placement of the battery maximizes cooling ForConstructionPros.com/21070707
Designed for wet or dry general application sawing, the MK-1800 has a maximum blade capacity of 18 in., providing a 6 5/8-in. depth of cut. • Hinged blade guard for easy blade changes • Depth control assembly allows blade to be raised and lowered to the desired cutting depth • Ergonomic vibration-dampening handlebars and crank assist • Ride-on-the-blade water distribution system with 6-gal. water tank ForConstructionPros.com/21050336
Guarda Edge Power Cutter
The Edge Power Cutter features Tri-Vac technology, a built-in extraction system that eliminates carbon monoxide from the exhaust and greatly mitigates silica dust levels. • Exhaust fumes are funneled down a waste tube and cooled with airflow and water • Suitable for 15-in. blades with a 6-in. cutting depth • Saw and blade guard move independently ForConstructionPros.com/21044687
DITEQ Guardian Blade
The Guardian blade by DITEQ features ARIX diamond arrangement technology for faster cutting speed and longer blade life. • Three segment designs including a wear guard deep segment • Air-cooled structural core prevents overheating • Designed for cutting cured concrete, green concrete, asphalt brick and block along with a wide variety of stone • Guardian blades are available in sizes ranging from 12 to 20 in. diameters ForConstructionPros.com/12029281
38 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_38-39_Sawing.indd 38
10/10/19 9:26 AM
U.S. Saws Early Entry Saw
Stens 309-100 Silver Streak 14-in. Segmented Blade
Silver Streak Diamond Cut-Off Saw Blades cut green concrete, block, concrete, brick, pavers, hard concrete and field stone. • Diameter: 14 in. • Cutting Width: .120 in. • Segment Height: 14 mm • Cutting Condition: Wet/Dry • Operating Speed: 5,460 max rpm • Weld Type: Sintered • With bushing knock out for 1-in. arbor • For angle grinders ForConstructionPros.com/21027842
This Early Entry Saw is designed to be a compact, lightweight and costeffective way to cut control joints in green concrete. • Powered by a 15-amp right angle grinder • Suitable for indoor jobs where exhaust fumes cannot be tolerated • Wide, polyurethane wheels track straight and allow for accurate cuts up to 2 in. deep. • Up-cut rotation pulls the blade downward into the cut for consistent depth • Dust collector can be attached to capture dust while cutting ForConstructionPros.com/12025473
SKILSAW MEDUSAW Walk-behind Concrete Saw
The 7-in. MEDUSAW model SPT79A-10 incorporates the same wet/dry dust management system and Dual-Field worm drive motor as the MEDUSAW but in a walk-behind configuration. • Adjustable arm extends to user’s height and folds and locks into place for transporting and storage. • Includes a larger handle and two-finger trigger, ambidextrous side assist handle, improved pointer for stronger support and larger wheel for greater visibility • Guard and foot made of die-cast aluminum housing with zinc-plated brackets and fasteners • Accommodates commonly available 7-in. blades ForConstructionPros.com/21046366
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 39
CONC1019_38-39_Sawing.indd 39
10/10/19 9:26 AM
REPAIR Roadware Easy Injection System The Roadware Easy Injection System can make effective structural repairs into 24 in. of concrete or more without pumps or ports.
• 10 Minute Concrete Mender, a nearly water thin structural polyurethane, is injected into cracks through a small pilot hole and a pressure sealing static mixer • Repairs cure in about 10 minutes and can be polished or coated in the same day ForConstructionPros.com/21045805
Metzger/McGuire Edge-Pro 90 Heavy Duty, Semi-Rigid Polyurea Floor Joint Filler
Metzger/McGuire Edge-Pro 90 Heavy Duty, Semi-Rigid Polyurea Floor Joint Filler is designed to fill and repair saw-cut contraction and construction joints in industrial concrete floors. • Offers color stability, moisture tolerance and a flusher shave profile within a wider finishing window • Ratioed at 1:1 • Available in 10-gal. units or 600-ml dual cartridges ForConstructionPros.com/21045445
PECORA-DECK 800 & 800 FC SERIES LONG-LASTING PROTECTION AGAINST THE ELEMENTS Durable, elastomeric Pecora-Deck coating systems deliver resilient protection against the elements and traffic; whether it’s for maintenance, restoration, or a new structure. Surfaces are shielded from damage caused by vehicular and pedestrian traffic abrasion, and the destructive forces of sun, water, temperature shifts, and corrosive chemicals. Choose the coating system that fits your project and protect the investment that has been made in the deck surfaces.
| (800) 523-6688
Sakrete’s Pro-Mix line is made up of professional grade, high-strength, fast-setting products formulated for exceptional workability. • Pro-Mix All-Purpose Concrete Mix for vertical or horizontal concrete repairs indoors or out • Pro-Mix Accelerated Concrete Mix for general repairs, walkways, small slabs and floors with depths of more than 2 in. • Pro-Mix Concrete Repair for concrete repair jobs with thicknesses from 1/4 to 6 in. • Pro-Mix Lightweight Concrete Mix for more-than-2-in. depths in difficult-to-reach places
| pecora.com
ChemPatch Rapid Setting Multi-Functional Repair Mortar
ForConstructionPros.com/21069789
QUIKRETE Re-Cap
Designed to provide a permanent wear resistant concrete surface that can withstand foot, vehicle and other heavy traffic, QUIKRETE Re-Cap delivers fourtimes greater bond strength, superior workability and longer working time. • Apply with a squeegee, trowel or brush • One 40-lb. bag will cover approximately 17 sq. ft. at 1/4-in.thick or approximately 90 sq. ft. as skim coat • Walk-on time of 8 hours and drive-on time of 24 hours ForConstructionPros.com/21025224
40 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_40-41_Repair.indd 40
Q
T C C a
ForConstructionPros.com/21044640
ChemPatch RS is a versatile single component cementitious repair mortar for a wide variety of horizontal, vertical and overhead repairs to concrete substrates. • Formulated to produce a light color concrete mortar that blends well with surrounding concrete, with accelerated set and high early strength • Create a smooth, broom, float or trowel finish • May be shaved or molded to match substrate contours
WE HAVE YOU COVERED
Ph: (215) 723-6051
Sakrete’s Pro-Mix Line
10/10/19 9:27 AM
P t 1 e a l A a a
l G c a
W r g c
The Contractor’s Guide to Quality Concrete Construction The fourth edition of the best-selling Contractor’s Guide to Quality Concrete Construction is now available in printed and digital formats.
Published jointly by ACI and ASCC, this guide is now 262 pages—over 100 pages longer than the previous edition—and includes full-color photos and illustrations, a new, easier-to-read layout, and substantial content updates. A summary, review questions, and an additional recommended reading list accompany each of the 12 chapters. To learn more about the new Contractor’s Guide to Quality Concrete Construction, contact ACI at concrete.org, or ASCC at ascconline.org.
Written by and for contractors, and referenced by many licensing authorities, this guide details proven practices to produce quality concrete construction.
concrete.org
CONC1019_40-41_Repair.indd 41
ascconline.org
10/10/19 9:27 AM
EQUIPMENT MANAGEMENT
By Jeremy Larsen
Finding the Equipment Management Sweet Spot
New software platforms help contractors automate and streamline data capture to make better decisions about their equipment fleet. New software applications can be integrated into existing construction ERP platforms to automate and streamline data capture and analysis. Photo Credit: Viewpoint
data-driven decisions to optimize fleet management and maintenance.
OWNING VS OPERATING
F
or firms engaged in heavy construction work, maintaining a healthy equipment fleet is both vital for project success and the successful management of capital expenses. Taking proper care of those heavy iron machines and vehicle fleets that keep projects moving is one of the most critical responsibilities today’s modern contractors have. For a contractor with a capital and operating budget of $10 million or more for heavy equipment, even a 1% savings on equipment costs could add hundreds of thousands of dollars directly to the bottom line. Properly maintaining equipment, however, means tracking and understanding the data that these
When a piece of equipment is purchased, there are ownership costs that occur regardless of how the machine is used. These costs are typically fixed annually and are based on the purchase price, interest, depreciation, licensing, insurance and taxes. As a machine ages, the incremental cost of ownership declines, due mostly to a slowdown in the rate of machines depreciation. produce. And Operating costs, capturing accurate however, go up over equipment information time depending on how is a challenge that many the equipment is used contractors face. Data Leveraging the right tools can help contractors maximize and maintained. As the collection and analysis equipment investments. machinery ages, increases has traditionally been Photo Credit: Viewpoint in fuel and oil consumpa manual process, and tion, routine maintenance and parts many times information would slip replacement, and unexpected repairs through the cracks leading to equipment occur. being poorly maintained, overused or As ownership and operating costs even retired before necessary. move in these different directions over To maximize equipment investthe lifecycle of equipment there is ments, one must first understand the typically a point of optimal return on differences and relationship between investment. This “sweet spot” occurs ownership and operating costs, leverwhen the increasing cost of operaage the right tools and technolotions begins to dominate the benefits gies to obtain accurate field data on of a decreasing cost of ownership for a performance and usage, and make
42 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_42-43_EquipManage.indd 42
10/10/19 9:28 AM
machine. This is when the machine is the most profitable but also when the incremental total costs of having that machine in your fleet begin to rise. Knowing where equipment stands in the fleet lifecycle can make a significant difference in knowing how each piece of machinery should be used on jobs, when to devote more resources to maintenance, and ultimately when to look at replacing equipment to keep fleets productive in the field.
WHY AIM FOR THE ‘SWEET SPOT?’ Beyond merely controlling equipment costs and managing maintenance plans, contractors rely on the optimum performance of equipment for nearly every facet of construction on the project. Having a truly optimized fleet of machinery is vital to keeping projects fluidly moving. By leveraging the mass volume of data that equipment produces and effectively analyzing it to find the true equipment management sweet spot, contractors are also able to: • Achieve more accurate job costing by understanding exactly how equipment usage (or non-usage) costs factor into the project’s overall budget and performance. This leads to more accurate estimates, which leads to more profitable projects and more work won. • Maximize equipment usage (and productivity) by evenly spreading equipment usage across projects and/or scaling equipment use to best serve current and future needs. A typical contractor wouldn’t pay the salaries of three employees to sit in the office each day and do absolutely nothing, but many contractors have equipment that is not being used properly, is sitting idle for long lengths of time, or is being misused on jobsites — all of which lessen the value on investment. • Maximize both the work life and value of equipment. By having data-informed strategic equipment
use plans in place, contractors can push that sweet spot even further out, extending equipment shelf life to gain additional value from their long-term capital investments. • Make smarter equipment asset decisions. When it does come time to make new equipment investments, having solid historical data and a keen knowledge of where equipment sweet spots lie for typical projects helps contractors decide whether to own or lease equipment, what types of equipment should be financed or purchased outright, when makes the best sense to sell or turn in leased equipment and more.
THE TOOLS TO MAKE SMARTER EQUIPMENT DECISIONS So, how can contractors achieve optimal equipment management? For data collection, technologies like telematics, mobile applications for equipment data collection in the field, and equipment capture technologies like Bluetooth and RFID are becoming more prevalent and powerful. The real hurdle for most companies is figuring out what to do with the data once captured. Few construction or financial managers have the time to parse and crunch the data on field operational costs on their whole fleet, combine that with data on incremental owning costs, and uncover the real rates at which their machines should be charged as costs against their jobs — a rate that changes over time for each machine. Fewer still have the time to track the trends in those rates to see when it starts to make sense to retire certain machines and invest in new ones. Yet, this is exactly what needs to happen if they are going to realize that bump to the bottom line.
The good news is that there are software applications — many integrated into existing construction ERP platforms — that can automate and streamline these processes, allowing equipment managers to take large sets of data, parse and analyze them, and create detailed reports. These applications help equipment managers know the real rates that should be applied to the use of the machines in their fleet and have information on hand to help with the difficult decisions of when to sell, buy or rent. When integrated into an ERP, this data can directly update job cost estimates and projections, ensuring that accurate bids are created and that accurate job profitability is recorded. If repair, maintenance, ownership costs and meter readings are diligently recorded for each piece of equipment, a company can accurately predict equipment lifecycles and optimal returns on investments. Creating historical data on the cost curves for owning and operating heavy equipment allows much more informed decisions about when to invest more in their fleet or when certain machines should be sold. Contractors can avoid the common problem of waiting too long to replace a piece of equipment. Using more informed data and metrics to create equipment benchmarks, they know when a machine will become more expensive to keep than it is worth.
Contractors must find a way to leverage the mass volume of data that equipment produces and effectively analyze it to find the true equipment management sweet spot. Photo Credit: Viewpoint
Jeremy Larsen is vice president of product management for Viewpoint, a global provider of integrated software solutions for the construction industry.
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 43
CONC1019_42-43_EquipManage.indd 43
10/10/19 9:28 AM
TESTING & SOFTWARE Topcon Advanced Concrete Application Workflows Rhopoint Instruments Novo-Gloss Trio Gloss Meter
The Novo-Gloss Trio is for the measurement of gloss of flat surfaces. • Measuring at 20, 60 and 85 degrees • On-board statistics, rapid data transfer, CSV data output, pass/fail, user definable batches and analysis software ForConstructionPros.com/21037133
Wirtgen AutoPilot 2.0
The AutoPilot 2.0 is a 3D system designed to use an existing data model or create a new digital data model at the site to produce all manner of offset and inset profiles. • Supplied for the models SP 15/SP 15i and SP 25/SP 25i slipform pavers; can be retrofitted • Comprises a computer integrated into the machine and a tablet attached to the Field Rover survey pole
• Satellite-based navigation system (GNSS) provides fully automatic control of the steering and cross slope of the paver ForConstructionPros.com/21047058
Command Alkon supplyCONNECT supplyCONNECT Replenish aims to automate and digitize the materials receiving process for vertically-integrated producers. • Material receipts are electronically transmitted to COMMANDbatch • Demand is also available to forecast needs and plan raw materials deliveries • Inventory provides real-time visibility to the current stock levels at each plant location • Each module can be used individually or combined as a bundle ForConstructionPros.com/21077878
Implementing Rithm on projects for wet or dry concrete scanning is designed to allow the opportunity to perform FFL analysis directly from scan data loaded into the Autodesk Navisworks software. • Find floor flatness and levelness mistakes in near real time from scan to finish • Visualize high and low areas with elevation and deviation heat maps and contour maps • Bundle option is part of the Topcon comprehensive approach to modernize core concrete applications such as layout, quality control and concrete screed with the latest capabilities in precise positioning technology ForConstructionPros.com/21050305
Wagner Meters Rapid RH L6 System with Total Reader
GSSI Improved StructureScan Mini XT
ForConstructionPros.com/21068640
ForConstructionPros.com/21072583
Wagner Meters' Rapid RH L6 system features the L6 Smart Sensor and incorporates an enhanced design capable of providing concrete moisture readings up to 100% RH. • Onboard memory device capable of storing 512 time-stamped measurements • Protective cap with butyl rubber seal • Available in two kits: Concrete Moisture Test Starter Kit+ and WFP400+ Rapid RH L6 Professional Flooring Installer Kit
A major software update for the StructureScan Mini XT concrete inspection GPR system expands its capabilities with an increased depth range, improved Focus Mode and Auto Drill feature. • Depth range increased to up to 24 in. • Improved Focus Mode uses input from the 2.7-GHz high-resolution antenna to resolve closely spaced and bundled targets • Auto Drill searches for potential obstructions to a planned core location by analyzing a user-selected position and size (1/2 to 6 in.) on a 3D grid
James Instruments James Bond Tester MK III
The James Bond Tester MK III, or pull off adhesion test, measures the bond strength or tensile strength of concrete, asphalt, tile, concrete repair, or other overlay material by the direct tension or pull off method. • Measure the near surface strength of a substrate • Determine the bond strength of a repair or overlay material after it is applied to the substrate • Determine the tensile strength of a repair, overlay or adhesive after the material is applied to the surface ForConstructionPros.com/21069320
Giatec Scientific SmartHub 24/7 Remote Monitoring System
With this system, concrete temperature and strength data collected from your SmartRock wireless sensor is automatically synced to your mobile device, eliminating the need for you to be on the jobsite. • Rugged, waterproof design can withstand any weather conditions • On the tablet provided, open your SmartRock app and sign in with the Hub user that can be created on the Giatec360 web-dashboard • Once logged in, SmartHub will automatically scan your jobsite for SmartRock sensors and collect temperature and strength data which are then uploaded to the Giatec360 cloud and synced to your team’s mobile app ForConstructionPros.com/21072841
44 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_44_Testing.indd 44
10/10/19 9:31 AM
By Amy Wunderlin
WORKSITE PRODUCTS & EQUIPMENT
The Skid Steer Saw When the job requires more mobility, the attachment really shines.
I
f you were to ask a classroom full of third graders what they want to be when they grow up, chances are at least a third of them would say a YouTube star. Since its inception 14 years ago, finding fame on the video platform continues to grow. So, when Matt Hephner uploaded a video of a custom saw he and his son Matthew Hephner built for their concrete cutting and drilling company Cuts Inc., it shouldn’t have been surprising how quickly it grew in popularity. Almost every day, the elder Hephner says he fields at least one call asking for more information about the saw. “I started getting a lot of people calling asking if we could build them, and so it has morphed into manufacturing. I have people calling almost daily from nothing more than that YouTube video,” he adds. The saw has been in production for two years. Last year, they sold about 10 saws, and today, there are 15 saws being used in the field. The one-of-a-kind saw attaches to a skid steer and is compatible with any diamond saw blade — two pieces of equipment nearly every contractor already owns. “We developed the saw 10 to 15 years ago for a project where we needed to do a tremendous amount of cuts in a short amount of time. We had to come up with a solution that was not yet available at that time, so we built this saw that attaches to a skid steer and finished the project ahead of schedule and under budget,” recalls Hephner.
FOR THE AVERAGE CONTRACTOR The skid steer saw attachment is designed to cut flat surfaces. It can also cut some vertical surfaces as long as you don’t go too high in the air, as well as things like concrete pipes, light poles, and sewer and drainage pipes. “Anything you’d normally put a diamond blade on to cut, that’s what this does,” Hephner says. He adds that it’s not concrete cutting professionals like himself that are buying the tool but the average contractor. “[The average contractor] doesn’t want to spend twice as much on a floor saw that has much higher maintenance costs, whereas this is just an attachment that he can keep on the side and use as needed just like he might use his broom, bucket or forks on his skid steer,” Hephner explains. Today, it is primarily being used for remediation work that involves cutting and removing old concrete slabs. Some contractors, which Hephner calls road
Being attached to a skid steer, the attachment can be used in almost any terrain. Photo Credit: Cuts Inc.
contractors, are cutting asphalt or concrete streets with it. Other customers are using the saw to mine blue stone or cutting other decorative slabs of stone. And one is using it to cut concrete panels. These types of jobs today are typically done with a walk-behind saw, but “where walk-behind saws are limited to a hard, flat surface — they can’t go across grass or gravel or mud — this is not limited. It can go anywhere a skid steer can drive,” says Hephner. The skid steer provides the hydraulic power necessary to run the saw. It also makes the saw completely mobile, allowing contractors to navigate any terrain. “When it comes to that job where you really need more mobility, it really shines,” Hephner adds.
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 45
CONC1019_45-47_WorksiteSkidSteer.indd 45
10/10/19 9:32 AM
WORKSITE PRODUCTS & EQUIPMENT The skid steer saw attachment is designed to cut flat surfaces, as well as things like concrete pipes, light poles, and sewer and drainage pipes. Photo Credit: Cuts Inc.
PROVEN RESULTS The skid steer saw attachment was also used during a technology integration experiment by the U.S. Army Corps of Engineers. The RADR Technology Integration Experiment, conducted in August 2017, compared lighter and leaner equipment, materials and methods for small crater repairs on an airport runway to those used in the traditional crater repair process. While
traditional crater repair equipment and materials are highly capable, they are large, expensive and logistically challenging. According to Matt, skid steer use was at the center of this testing. The SS3600 and SS4200 concrete saw attachments from Cuts Inc. were chosen to compete against conventional concrete cutting tools. Testing criteria was for overall weight of the equipment, compactness for storage, daily maintenance, ease of use and, most importantly, speed. “The SS3600 saw attachment ranked lighter and more compact with less daily maintenance and, most importantly, faster yielding cut speeds of 1.41 to 1.64 ft. per minute cutting
15- to 18-in. depth 8,500 psi concrete,” he adds.
SAFETY & MAINTENANCE The saw attachment also provides a better level of comfort than a floor saw, where the intense manual labor required to operate it results in injuries such as strained back muscles. “There is so much less operator fatigue when you’re running a skid steer versus out in the elements running a floor saw. One, you’re protected from the weather elements. Two, you’re protected from the noise,” notes Hephner. Because the skid steer uses water as a silica control method, it also doesn’t create any dust, unlike wheel saws that create an immense amount of dust. “That’s really going to be a big issue going forward,” Hephner says. “[Silica dust] is the new asbestos.”
LOW PROFILE
HIGH R.O.I.
W I N C H E S
The Lo Riser Inclining Platform Trailer is a versatile tool that will help increase your efficiencies and lower costs to deliver a higher return on your investment. With a Lo Riser you'll see:
✔ ✔ ✔
Lower labor costs - one man loading/unloading offers more deliveries per day
Lower specialized equipment costs - no rollback truck required, just a pickup truck - no crown point, equipment can be driven up the built-in ramp
4 Degree Load Angle
Lower worker's comp claims
RY N INDUST STRUCTIO N O C E H T HES FOR TY WINC SPECIAL
- enhanced safety features eliminate most opportunities for injuries - no more dangerous, slanted ramp boards
Stop, Drop and Load your way to maximum profits.
*shown with optional paint color
Inclining Platform Trailers
®
Manufactured by: The Advance Metalworking Company, Inc.
1-800-369-5365
www.advancemetalworking.com
BLOOM MANUFACTURING, INC. Custom Engineered Solutions Since 1910 Independence, IA 50644, USA | bloommfg.com P: 319-827-1139 | 800-394-1139 | F: 319-827-1140
46 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_45-47_WorksiteSkidSteer.indd 46
10/10/19 9:32 AM
Without a
Honda Engine, your crew sees this:
Hard-working crews know that there’s a difference between equipment backed by a Honda engine and those that won’t stand up to the rigors of a demanding jobsite. From floats to compactors, compressors, pumps, and generators, real pros choose durable, fuel-efficient, and easy starting Honda GX Series engines on their equipment. Not to mention, the standard 3-Year Warranty* that backs up our legendary reliability.
Learn more at engines.honda.com *Warranty applies to all Honda GX Series engines, 100cc or larger purchased at retail or put into rental service since January 1, 2009. Warranty excludes Honda GXV140 and GXV160 models. See full warranty details at engines.honda.com. For optimum performance and safety, please read the owner’s manual before operating your Honda Power Equipment. ©2018 American Honda Motor Co., Inc.
CONC1019_45-47_WorksiteSkidSteer.indd 47
10/10/19 9:32 AM
WORKSITE PRODUCTS & EQUIPMENT Curb Fox 5000-T
The Curb Fox Multipurpose 5000-T now paves zero clearance sidewalk up to 7 ft. wide.
Bloom LS80K Lift-Safe Planetary Winch
The LS80K Lift-Safe planetary winch features a Duet-Safe double-action braking system that combines a hydraulic brake with a braking valve. • Automatically hold loads when hydraulic pressure is released and control speeds during lowering operations • 65,000-lb. lifting capacity • Modular, customizable design • All-steel construction of the gear support, end housing and winch drum • 5 1/8-in.-diameter heat-treated alloy steel drum shaft ForConstructionPros.com/10742925
• Also paves curb and gutter, standard sidewalk or bike path up to 10 ft. wide and median barrier up to 39 in. high • 50-hp diesel engine or optional 75 hp • Standard machine weight is 8,000 lb.; can go up to 16,000 lb. for larger sections ForConstructionPros.com/21022956
Gehl RT135 Compact Track Loader
The RT135 has an overall width of just 57 in. and height of 76 in. and an operating weight of 6,510 lb., yet can lift up to 110 in. and 1,350 lb. at 35% operating capacity. • 46.6-hp Yanmar engine with automatic regeneration and zero fuel additives • Cab-forward design incorporates Level II FOPS, robust operator station, pilot joystick controls and all-around visibility • IdealTrax track tensioning system automatically tensions tracks when engine is on and releases when engine is turned off • All-Tach universal attachment system standard with optional Power-A-Tach system available • Other optional features include a backup camera and a self-leveling hydraulic lift ForConstructionPros.com/21085399
48 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_48-55_WorksiteProducts.indd 48
10/10/19 9:33 AM
Type 304 Stadium Seats
Type 316 Coastal Railings
Type 304 Breweries
Type 316 Water Treatment Plants
Type 304 Kitchens
Type 316 Bridges
Stainless-steel anchorage for any application. Our code-listed Titen HD heavy-duty screw anchor is now available in Types 316 and 304 stainless steel to resist corrosion and maintain the structural integrity of concrete. Type 316 is the optimal choice for applications in corrosive or severe environments such as near chemicals or salt water. Type 304 is a cost-effective solution for less extreme applications, including in wet, moist or damp environments. ®
Cracked
Concrete CODE LISTED
To learn more about the Titen HD (available in 3⁄8", 1⁄2", 5⁄8" and 3⁄4" diameters) visit go.strongtie.com/titenhdss and download our guide or call (800) 999-5099. © 2019 Simpson Strong-Tie Company Inc. 304316THD18
CONC1019_48-55_WorksiteProducts.indd 49
10/10/19 9:33 AM
WORKSITE PRODUCTS & EQUIPMENT
Caterpillar D3 Series Skid Steers and Compact Track Loaders
Thes D3 Series includes 16 skid-steer loader, compact track loader and multi terrain loader models with rated operating capacities (50% tipping load) from 2,185 to 6,200 lb. and power ratings from 67.1 to 110 gross hp. • Wider opening cab door and increased distance (3 in.) between joystick pods for extra space inside the cab • CTLs feature standard two-speed travel and changes to the undercarriage frame and torsion axles that reduce machine pitching and rocking • Smart Technology automatically recognizes Smart Attachments and converts machine controls to align with the needs of that attachment • Advanced control features include Return-to-Dig and Work Tool Positioner ForConstructionPros.com/21087424
Transguard 4000 Concrete Curing Covers
Transguard 4000 reusable concrete curing cover is designed to maintain optimal moisture during the concrete curing process, reducing the chance for cracking, dusting and scaling. • Unpigmented, polypropylene, non-woven fabric with a white polyethylene backing • Holds and maintains moisture, minimizes heat and limits evaporation • 50 mils thick • Use indoors or outdoors
W.R. Meadows HS-1 SL Self-leveling Joint Sealant
HS-1 SL self-leveling hybrid sealant developed with silyl-modified polymer (SMP) technology cures under the influence of atmospheric moisture. • Adheres to green concrete, damp surfaces and most construction materials • Available in gray and tan • Allows movement capability of 25% • Cures bubble-free • Is permanently elastic over a wide range of temperatures • Resists chlorinated water splashes • Non-gassing • VOC-compliant ForConstructionPros.com/21075906
Your Solutions Partner Operational Efficiency | Sustainability | Materials Management
Photo Credit: B & B CONCRETE COMPANY, INC., Oxford, MS © Copyright 2019 GCP Applied Technologies Inc. All rights reserved. CP0134 - 1019
ForConstructionPros.com/10090897
gcpat.com CONCERA®
Control Flow Concrete
VERIFI®
In-transit Concrete Management
CLARENA®
Materials Management
50 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_48-55_WorksiteProducts.indd 50
10/10/19 10:56 AM
CONC1019_48-55_WorksiteProducts.indd 51
10/10/19 9:33 AM
WORKSITE PRODUCTS & EQUIPMENT
Advance Metalworking Lo Riser Trailer
The 16,000-lb.-capacity Lo Riser inclining platform trailer hydraulically lowers the platform to ground height with the flip of a switch. • Built-in ramp provides a 4-degree minimum angle for smooth, drive-on access suited for low ground clearance or reduced gradeability vehicles • Simple operation, flexibility and enhanced safety easily allow one person to load and transport cargo • Four-position ball hitch allows adjustment to various vehicle heights • Features include a 19,725-lb. GVWR and a 4:1 payload-to-trailer weight ratio ForConstructionPros.com/12006445
Honda EU2200i Super Quiet Series Generator
The Advantage is
Safety Worker safety drives everything we do. Vacuworx vacuum lifting systems are engineered to help your crew be more productive while keeping them out of harm’s way. From our lifters to the pads, right down to the filters and Tough Seal™, we pay attention to every detail because safety is the standard we live by. Find out how much faster, safer and smarter your crew can be using Vacuworx lifting systems and put the Vacuworx Advantage to work for you.
vacuworx.com
The EU2200i has a maximum AC output of 120 volts/2,200watts/18.3 amps and a rated output of 120 volts/1,800 watts/15 amps. • Improved stator/ rotor configuration reduces weight while providing more power output • Parallel connection allows for pairing with another unit for even more output • 121cc Honda GXR120 Commercial Series four-stroke engine with overhead camshaft and compact muffler reduces operation noise by 1 dB • Microprocessor controls the inverter process, as well as engine speed as demand changes
I
ForConstructionPros.com/20986006
Vacuworx Wireless Remote Option
The new wireless remote for the SL 2 and CM 3 Vacuum Lifting Systems offers greater mounting versatility and easy operation. • Eliminates the need to route hoses and a controller to the cab of the host machine • Provides a greater range of motion and allows easy attachment to equipment other than skid steers, such as backhoes, forklifts and cranes • Simplified setup and connection to host machine • Press any button on the remote to activate the transmitter and receiver on the matched equipment ForConstructionPros.com/20991724
52 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_48-55_WorksiteProducts.indd 52
co
10/10/19 10:56 AM
The Honda EB2200i Industrial Series Inverter Generator. It’s Trusted Jobsite Power. Now packed with more features and 10% more power.*
It’s time to get more work done, when you want, where you want, with the EB2200i generator from Honda. It’s easily portable and now packed with 200 more watts* of stable power and all-new features. With a GFCI 120 volt duplex receptacle, OSHA compliance, and the same reliability you expect from Honda, it’s trusted jobsite power. Learn more at gen.honda.com.
*10% more power at max load than the EB2000i Honda generator. Please read the owner’s manual before operating your Honda Power Equipment and never use in a closed or partly enclosed area where you could be exposed to odorless, poisonous carbon monoxide. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician. © 2019 American Honda Motor Co., Inc.
CONC1019_48-55_WorksiteProducts.indd 53
10/10/19 9:33 AM
WORKSITE PRODUCTS & EQUIPMENT
GCP Applied Technologies
GCP manufactures a full portfolio of concrete technologies that help producers optimize operational efficiency, materials management and sustainability. • VERIFI in-transit concrete management system monitors, measures and manages concrete in transit • CONCERA admixtures enable the production of control flow concrete, high flow segregation-resistant concrete, which bridges the gap between conventional and self-consolidating concrete • CLARENA RC 40 additive is an environmentally-friendly solution to easily recycle and reuse plastic returned concrete ForConstructionPros.com/21090571
Bobcat Rear Camera Kit
The optional Rear Camera Kit for Bobcat skid-steer and compact track loaders provides a continuous rear view of the machine to prevent contact with obstacles that may damage the loader and its components. • 4.3-in. LCD color monitor with LED backlit screen, wiring harness, mounts and a tailgate-mounted camera that offers a 118-degree horizontal viewing angle and 89-degree vertical viewing angle • Multiple screen and camera settings • Activated when ignition is turned on and runs continuously as the loader moves in both forward and reverse motions • Compatible with any M-Series or newer model
C F C M
ForConstructionPros.com/21009876
Construction Accessories Inc. JackJaw
CONCRETE CURING COVER
the curing cover designed with safety in mind
JackJaw extractors make an easy task of pulling concrete form pins, stakes, "T" fence posts, string line stakes, utility ground rods, sign posts, tent stakes and more. • Patented jaw and lever mechanism pulls stakes straight up out of the ground without bending them • Available in three sizes and over 40 models
IT’S DIFFERENT EXTREMELY DURABLE
ANTI-SLIP SURFACE
TRANSHIELD-USA.COM/TOPCURE
HYDRATING PODS
F
Keson Box Beam Levels feature a heavy weight profile to ensure heavy use won’t affect accuracy. • Two-material end caps to protect from damage due to drops • Single measuring surface • Tension-wedge mounted vials (self-compensates for temperature changes) • FOCUS vial to give easy, accurate readings ForConstructionPros.com/21045803
54 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_48-55_WorksiteProducts.indd 54
F
ForConstructionPros.com/21018370
Keson Box Beam Level MEETS ASTM C171
C f t
10/10/19 10:56 AM
B
T g
F
Transhield TopCure Concrete Curing Cover
Transhield introduces TopCure, a high-quality, state-ofthe-art concrete curing cover that provides a controlled environment for slab-on-grade curing. • Grit surface provides anti-skid surface to keep workers from accidental slips and falls • Proprietary reflective white coating reflects sunlight which helps control the temperature under the cover • Hydrating pods allow faster water absorption in the nonwoven material and concrete surface area • Meets ASTM C171 • Water vapor transmission rate (WVTR) of 5 gm per square meter or less per day
LevMix Mobile Mixer
ForConstructionPros.com/21007237
Kryton International Krystol Internal Membrane (KIM) Cementex Fully NonConductive Fiberglass Measuring Tools
Cementex announces the availability of fully non-conductive fiberglass measuring tools. • 33-ft. measuring tape and 6-ft. measuring stick • Not affected by environmental changes – even if they get wet ForConstructionPros.com/21048361
Krystol Internal Membrane (KIM) is a hydrophilic crystalline admixture used to create permanently waterproof concrete. • Any moisture introduced over the lifespan of concrete will initiate crystallization, ensuring permanent self-sealing • Protects concrete from chemical attack and prevents corrosion of reinforcing steel • LEED eligible additive ForConstructionPros.com/21030707
Two-Wheeled BeastBarrow
The BeastBarrow’s secondary, in-line, swiveling BeastBarrow in maneuvering/parking position wheel supports the wheelbarrow’s load so the user only has to balance it when pushing materials on a jobsite. • 1-in. Schedule 40 aluminum pipe frame (welded) • 1/8-in. sheet aluminum pan, with 1/2-in. solid aluminum lip • Squared tub corners work better with flat shovels and hoes • Curved handles, slightly higher than traditional wheelbarrows • Solid 1-in. axle and two wide tires, each with a 500-lb. capacity • Weight: 75 lb. ForConstructionPros.com/21043594
BN Products BNT-40X Tiger Tier
The BNT-40X Tiger Tier is lightweight and has a compact, easy to hold, glove friendly grip designed to tie up to two #6 (20 mm) rebars. • One-piece CNC rigid nose piece • Battery makes more than 5,000 ties on a single charge (extra battery included) • Standard wire is zinc-plated to inhibit rust and corrosion • The 18V Lithium-Ion power pack quick-charge battery drives the tool’s brushless motors • Tool comes with a quick charger and four spools of wire in molded plastic carrying case • Weight: 5.8 lb.
The new LevMix unites three steps in one operation: • • •
mixing transporting pouring
The new LevMix mobile mixer combines the attributes „FAST and EASY“. Mix several bags in the shortest time.
www.collomix.com
ForConstructionPros.com/21060979
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 55
CONC1019_48-55_WorksiteProducts.indd 55
10/10/19 9:33 AM
POWER TOOLS, HAND TOOLS, LASERS & LEVELS The Traker from Aaron Hilbert LLC
The Traker is a manual tool for installing contraction joints in concrete slabs-on-ground. • Uses a roll of plastic tape resting against an insertion disc • Insertion disc folds and embeds the tape into fresh concrete • Top edge of the tape is pushed slightly below the concrete surface • Tape remains in the slab to create a weakened plane ForConstructionPros.com/21035955
Collomix Mixing Station RSU
• Supports Collomix CX300/600 and CX22/44 DUO hand mixers • Provides maximum mixing action with minimal operator exertion • Gas-pressurized spring for lifting assistance • Full range maneuvering • Optional Tub holder: Tub fixing device, for container diameters 8 thru 12.5 in.
ForConstructionPros.com/10182307
Xtool Xtreme X-10 Arm Xtension
Xtool Xtreme X-10 Arm Xtension super joint cutter is designed to make concrete joint cutting, cleaning and crack chasing easier. • No tools required to adjust length • Weight supporting single wheel design with depth adjustment • Angular pivoting of cutting wheel for straighter cuts • Remote switch alongside handle • Arm support and handle for comfort and slip resistant grip • Baton style handle for one-handed operation • Adjustable length along with hook and loop strap for arm support ForConstructionPros.com/21087778
SU
No longer will we have to settle for a clumsy piece of equipment coming between us and the work surface, not when the X-10 Arm Xtension makes the business of cleaning out expansion joints effortless, like an extension of an arm.
TE CU T T IN JO
PE R
XXt 10 en A sio rm n
Once assembled, no tools are required to adjust the length to maximize the comfort and visibility to your particular height, giving you greater control and a fatigue-free operation, resulting in reduced operational time and increased profits.
R
XTool Xtreme is proud to introduce it’s Patent Pending, Innovative Design for effortless and efficient joint cutting, cleaning and crack chasing, making work easier in the concrete coating and concrete polishing industries.
Features include: ★ Weight supporting single wheel design with depth adjustment ★ Angular pivoting of the cutting wheel for straighter cuts ★ The remote switch is conveniently placed alongside the handle for safety
★ Arm support and handle for comfort and slip resistant grip ★ Baton style handle for one handed operation with exceptional control ★ Adjustable length along with a hook & loop strap on the arm support ensures incredible balance and stability
Email: XtoolXtremeinc@gmail.com Phone: 407-487-1832 • Xtoolxtremeinc.com
Sponsored by Superior Artistic Texture, Inc.
56 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_56_PowerTools.indd 56
10/10/19 9:34 AM
INDEX ADVERTISER .............................. PAGE Aaron Hilbert LLC ...............................................................48 Advance Metalworking Company .....................................46 American Concrete Institute ..............................................41 ASL Machines......................................................................32 BackSaver ............................................................................39 Bloom Manufacturing Inc...................................................46 Caterpillar Dealer Network* ................................................5 Collomix USA ......................................................................55 ConEXPO ............................................................................59 Construction Accessories, Inc............................................48 Curb Roller Mfg. LLC ..........................................................14 Diteq Corp. .........................................................................30 EZ Polish ..............................................................................34 EZ Screed Tools ..................................................................19 GCP Applied Technologies ...............................................50 GelMAXX .............................................................................35 Honda - Engines .................................................................47 Honda - Generators............................................................53 IGNITE Construction Summit ............................................17 Kingdom Products ..............................................................26 Ligchine International Corp. ................................................2 Lura Enterprises, Inc. ..........................................................21 McKinnon Materials, Inc. ....................................................25 Minnich Manufacturing ......................................................13 Neuvokas Corporation .......................................................10 Niagara Machine Inc. .........................................................34 Nox-Crete Products Group ................................................27 Oztec Industries Inc. ...........................................................60 Pecora Corporation ............................................................40 Pulse-Bac Vacuum Systems LLC ........................................37 Putzmeister America...........................................................15 Quikrete...............................................................................51 Reliable Diamond Tools .....................................................33 Simpson Strong-Tie Co., Inc. .............................................49 Brickform, A Div. of Solomon Colors, Inc. ........................24 Lythic / Solomon Colors, Inc. .............................................32 Somero Enterprises ............................................................23 Stego Industries ....................................................................9 Superabrasive Inc ...............................................................31 Transhield ............................................................................54 Trinic.....................................................................................26 Vacuworx Global .................................................................52 VoidForm Products, Inc. .....................................................10 W.R. Meadows, Inc. ............................................................28 Wagman Metal Products Inc..............................................29 World of Concrete ..............................................................11 Xtool Xtreme, Inc. ...............................................................56 * Denotes regional ad
www.forconstructionpros.com/concrete | October/November 2019 | Concrete Contractor 57
CONC1019_57_Index.indd 57
10/10/19 11:00 AM
THE LAST PLACEMENT
By Brad Humphrey
CULTURE SPEAK: What is Your Company Saying?
iStock
O
ne of the telling differences I’ve observed about the construction industry over the years is the refocusing on something called culture. Thirty years ago, very few contractors spoke in terms of company culture. That has all changed today! Every contractor needs to know and grow a culture that represents the best that they can be. Consider the following definition:
"Culture is the cumulative personality of my organization based upon my beliefs, view of what I do, the traditions and values I hold to as an owner or senior leader, and certainly the attitudes and work ethic of all who work in our company.” In many ways, your culture is what others say you are, what they see produced or how they see it produced. It seems to be felt when others — an employee, customer or supplier — engage your company. So, should you be concerned with the culture of your company? Yes! And there are steps you can take to build a better culture. Let’s first take a peek at how others might read your company culture: • Your crews leave the jobsite cleaner than when they arrived. • Your front office person greets visitors with professionalism and grace. • Your field leaders announce to customers when they have arrived and offer to walk through what they will be doing that day. • Your experienced workers help new workers. • Your workers donate, voluntarily, money to help out a fellow worker
whose child just got diagnosed with cancer. But how can a contractor build the sort of culture that they want to own, something that can reflect all that they know to be good? Consider a few ideas — all efforts that I’ve personally helped contractors implement. 1. Develop your company’s vision & values. It is vital to have a clear vision of what you want the company to be focused on. Then create the values to support the vision. Think of the values as “legs” that help to carry the vision to employees, customers and suppliers. 2. Engage employees on how to live the vision & values. One reason some contractors struggle with creating a good culture is that they never talk about their vision and values with all the employees. The “vision statement” is sometimes captured on a plaque or business card, which is fine, but it needs to be talked about. When people begin to discuss how they can really live the vision and values, then you begin to see people putting out a better effort. 3. Recognize and reward employees who are “caught living” the vision & values. Sometimes that recognition and reward might be a dollar, but sometimes an “atta boy” can go a long way. The main point here is that we need to be consistent and proactive. Recognizing the foreman who won over an angry customer can go a long way toward reinforcing the culture you want... and it makes the foreman feel great! 4. Share compliments from customers/suppliers. Most
of our workers are, well, working! They haven’t the time to sit around wondering if a customer likes them or their work. However, many customers say "thank you" or “job well done," and when they do make sure to pass that appreciation along. This reinforces employees' efforts and conduct. 5. Engage workers to reflect on the company. This can be touchy for owners, and not all employees will be transparent, but it is still important to give your employees the chance to share how they feel about the company. Working with some clients, I’ve conducted a “Culture Survey,” to measure some of the processes in a confidential manner. This allows employees to respond and rate how things are progressing in the company. If the feedback is taken seriously, and if the owner and senior leaders will work to make good, solid and important improvements, the employees will respond positively. 6. Be authentic. That means addressing even the worst things honestly, professionally, and in a controlled and objective manner. 7. Leaders refocus & recommit. In the midst of day-in, dayout work, it's easy to let go of our vision and values. Therefore, I urge owners and leaders to have a little monthly time for “R&R,” except in this case it stands for “Refocus & Recommitment.” If our senior body of leaders do not "walk the talk" as it relates to living the vision and values, there is no way under God’s green Earth the workers will comply. Owners and senior leaders must live the culture first and consistently!
58 Concrete Contractor | October/November 2019 | www.forconstructionpros.com/concrete
CONC1019_58-60_LastPlacement.indd 58
10/10/19 11:02 AM
s
p
are l
CONC1019_58-60_LastPlacement.indd 59
10/10/19 9:35 AM
CONC1019_58-60_LastPlacement.indd 60
10/10/19 9:35 AM
BIGGER GOT BETTER MORE construction news, analysis, video, equipment
See for yourself! ForConstructionPros.com
North America’s #1 construction web portal g : s Blo ee es in usin y m ion B or ct Notruct ire 17 ons tD 20 st C Be en n pm for tio ui alog truc Eq cat cons vice w nline ew d ser Ne ur o 0+ n s an n ce g Yo ,00 ct i ien n 30 odu s er tio pr De exp iga w user d nav Ne tter nde Be xpa E
Daily infusion of content just for the construction industry
CONC1019_5B_Housead.indd 2
10/10/19 10:15 AM