Choosing The Right Tooling, Made Easy

FOUNDATIONS & WALLS » BY JONATHAN KOZLOWSKI, EDITOR

One of the biggest challenges in surface preparation is properly qualifying the application to ensure the right tooling is used for the job at hand. It’s also one of the first important steps and easiest ways to start costing money if not set up properly. A mismatched tooling to a project can either be not effective or wear out the tooling prematurely. Putting diamonds on adhesive will likely only melt the glue. Put the wrong diamond on an industrial coating and it’ll just ride over the top, not removing anything. Using an abrasive diamond or medium bond diamond on a hard concrete application and the diamonds glaze over.

In the interest of productivity, efficiency, and simplifying the process to help make sure the right tooling is used for the job at hand, it helps to think of surface preparation as three segments: strip, grind, and remove.

THE 3 PILLARS OF SURFACE PREP

Considering the diverse range of tooling available on the market, making sure to choose the correct tooling in any surface preparation project can be a confusing moment. In an effort to try and simplify this, EDCO has developed “Core 4 Tooling.”

“We always talk about it being a recipe for success,” says Tony Calcopietro, the sales director of the rental division at EDCO Equipment Development Co. That problem that we see isn’t necessarily a choice of the wrong grinder, but if the tooling selection is wrong it results in a failed application costing money, downtime, frustration, return of rentals, and customers not getting the job done in a timely manner. I can go on.”

Whether you’re a general contractor that’s just tapping into surface prep, the man in the truck doing it for the first time, the general handyman doing a bit of everything, or even the weekend warrior – education is key. The project can easily get more complicated than it needs to be if you don’t understand what the tooling and machinery do.

Contractors have budgets just like everyone else and there is only so much space in the toolbox. But like there isn’t one wrench, skid steer, or excavator to do every job, it’s the same with surface prep. “People want to just have one tool to do everything, that’s not how it works,” says Calcopietro. • STRIP – Featuring special sides to make the removal of soft/thick materials and coatings. Use a stripping tooling if you’re project has a soft glue or adhesive, foam rubber carpet backing, flaking paint, soft mastic, or thick industrial buildup. • GRIND – Designed for hard/thin coatings and to lightly level concrete, grinding toolings should create a smooth concrete surface. A hard thin coating, concrete sealers, mortar-based thinset, light concrete leveling, and smooth/level concrete imperfections all match a tool meant for grinding.

• REMOVE

– Since these toolings are designed to remove thick industrialstrength coatings, they will leave a textured surface on the concrete. Use a tooling meant for removal for waterproof membranes, hard thick coverings, pool/cool deck as well as an epoxy and polyurea coating.

SAFETY IS YOUR BEST TOOL No matter the job, remember your PPE:

• Gloves • Safety goggles / glasses • Steel toed shoes • Respirators • Hardhat (for certain jobs) • Vacuum / dust control system (or dust suppression solution, at a minimum) • Lithium silicates do not require rinsing EDCO Equipment Development Co.

34 CONCRETE CONTRACTOR DECEMBER 2022

Other shows may talk a big game, but only World of Concrete speaks

concrete and masonry. We know that a solid foundation isn’t just part of the structures you build — it’s also the key to a more profitable business. That’s why you’ll find everything you need to strengthen your operation here, from new products, innovative solutions, and new technologies to help you capitalize on emerging opportunities.

We Speak Your Language: www.worldofconcrete.com

EXHIBITS: JANUARY 17-19 2023 EDUCATION: JANUARY 16-19

LAS VEGAS CONVENTION CENTER

FOUNDATIONS & WALLS CONTINUED

A general guide to the predominate aggregate hardness in the U.S. The type of aggregate inside concrete or asphalt can directly affect the performance of a diamond tooling.

EDCO Equipment Development Co.

EDCO Equipment Development Co.

EDCO’s CORE 4 family features the Magna-Trap line of tooling, grouped to simplify the selection process. What they’re doing is correlating the layers (material) one might have on the floor and need to remove to how to get those off. Gary Ondrus, the corporate trainer

at EDCO, and his team trains people regularly to help them be as effective as possible. “We train about recognizing what the layers you’re trying to get up… and what tooling we’d use with what grinder in the Strip, Grind, Remove process,” he says. “The Strip Grind Remove is really just paralleling with working on layers and understanding the layers [you] might be dealing with.”

In a sort of helping-the-helper situation, EDCO has set up a set of questions for dealers to assist contractors to determine the final goal. Through these, dealers can better advise which tooling and equipment will be needed.

PRO TIP: STRIPPING

Throw a little sand on the surface if the adhesive starts to reactive. Doing this will allow the glue to adhere to itself rather than to the tooling.

PECORA DECK COATING SYSTEMS

PROTECTION AGAINST THE ELEMENTS

Pecora-Deck 800 & HB1000 traffic coating systems prevent surface degradation caused by traffic abrasion & the destructive forces of the elements by delivering durable protection to wearing surfaces like concrete & plywood. Whether for restoration or new construction, protect your investment with the Pecora-Deck system that fits your project.

FIND OUT MORE: PECORA.COM

PRO TIP: TEST FOR HARDNESS

Use a Moh’s hardner test. Not all concrete are created equal – even on the same jobsite. Concrete changes from residential to commercial to industrial.

36 CONCRETE CONTRACTOR DECEMBER 2022

EDCO Equipment Development Co.

Ultimately, it’s research and education that will help you understand what you’re getting into with surface preparation. If you’re not finding the information you need, ask your dealer. A good dealer should be a great resource for answers.

“There’s so much information out there – and clickable. Your biggest aggravation is going to be getting the tooling on and it’s not cutting – it just cost you time and money. The biggest thing is to educate yourself,” says Ondrus.

While residential might be under 3,000 psi, commercial might be 3,000-6,000 psi, and industrial might be 6,000+ psi. Knowing where you’re at and the type of hardness of a floor can help.

For more information visit http://CONC.me/36uqby

CONCRETE

THE

CURING COVERS

www.ForConstructionPros.com/Concrete DECEMBER 2022 CONCRETE CONTRACTOR 37