Gates Micro-V Mar 2013

Get kitted up!

With Gates Micro-V® kits

A growing range for a growing trend – 450+ references now available

With the most extensive range in the market, Gates Micro-V® multi-ribbed belt kits provide the perfect solution to guarantee a reliable accessory belt drive system replacement.

Find out why it’s so important to replace all wear parts, and NOT just the belt…

AUTOMOTIVE

THE ACCESSORY BELT DRIVE SY Key components To understand why all ABDS wear parts should be replaced together, it is important to recognise the different components that make up this system.

2 Hard parts driven by the ABDS 1 The alternator

5

2 The power steering pump 3 The air conditioning compressor, water pump or fan (depending on application)

8

7 6 4

Wear parts within the ABDS 4 The multi-ribbed belt Transfers power from the crankshaft pulley to all belt-driven accessories. Gates strongly advises inspecting the belt at each service interval.

5 The tensioner Maintains the correct tension on the belt. If the belt tension is too low, the belt will slip causing noise, extremely high temperatures and premature belt wear. If the tension is too high, this will cause excessive wear to the belt and belt-driven accessories.

6 The idler Is a free-spinning wheel around which the belt travels to optimise belt routing and minimise belt flutter. The most common issue with idler pulleys is misalignment, which is also the main cause of premature belt failure.

3

Key to diagram: hard parts

wear parts

7 The torsional vibration damper (TVD) Absorbs vibrations from the crankshaft and extends the lifespan of the belt and belt-driven components. A worn TVD cannot properly dampen vibrations, compromising the lifespan and performance of engine accessories.

8 The overrunning alternator pulley (OAP) Allows the alternator to “free-wheel” or “overrun” every time the engine decelerates.

A damaged OAP cannot effectively dampen vibrations nor properly transmit power to the alternator compromising the lifespan of other ABDS components and engine accessories.

1

STEM (ABDS) Why choose a Gates Micro-V® kit to replace all ABDS wear components? > Everything you need for a complete ABDS overhaul in one box –M ulti-ribbed belt(s), tensioners, idlers, TVDs and/or OAPs (depending on part number), all guaranteed as OE quality.

> All required components in one box, means one part number – Easier to order, stock, handle and sell.

> Reliability – ABDS failures increase dramatically after the fourth year of service, so Gates recommends replacing all wear parts at least every four years or 62,000 miles (whichever comes first).

> Time saving –F itting a Micro-V® kit should take a maximum of 1 hour and 15 minutes. This is much more efficient than just replacing the belt and reduces the chances of a further ABDS failure and repair job.

> Optimise component lifetime – Failure to replace the various pulleys can reduce the ABDS life span by as much as 75 per cent!

> One warranty – As all components are supplied in one kit, any warranty claims can be swiftly dealt with by Gates – no need for multiple investigations.

> Safety –F ailure to replace all wear parts can have serious consequences. For example, if the ABDS fails and power steering is lost, the driver may lose control of the vehicle, seriously compromising safety.

A growing range for a growing trend Just as it did with timing belt kits, the market is shifting towards using multi-ribbed belt kits to replace drive system components – in recognition of this, Gates has and will continue to expand its Micro-V® kit offering, with the current number of kits standing at 498 part numbers – the most comprehensive range in the market today. The nearest competitor offers just over half the number of references!

Stock Pack Offers To make stocking the right mix of Micro-V® kits even easier, FPS and Gates have developed small, medium and large stock packs, ensuring that there is an option to suit your business:

Product Range Micro-V® Kits

Small Stock Pack Stock Pareto Quantity Coverage 10 18%

Medium Stock Pack Stock Pareto Quantity Coverage 25 30%

Large Stock Pack Stock Pareto Quantity Coverage 40 40%

What’s more, when you purchase a stock pack we will reward you with a selection of promotional items as follows:

> Small Stock Pack 10 thermal mugs, personalised flyers and 10 ABDS troubleshooting guides

> Medium Stock Pack 25 thermal mugs, personalised flyers, 5 fleeces and 25 ABDS troubleshooting guides

> Large Stock Pack 4 0 thermal mugs, personalised flyers, 10 fleeces, 40 ABDS troubleshooting guides and a free training evening

PLUS! If for any reason you are not happy with the performance of your stock pack, a reprofiling service will be offered after 6 months to ensure that the products on your shelf are working for your business!

Speak to your local FPS branch to find out more and to place your order!