Produkt range - Road Snow blower Spreader Leveller / Grader Chain mower
Vision Quality and flexibility are Fransgards core values With extremely skilled staff, modern production machinery, a 10,000 m2 factory and more than 40 years of experience in the industry, Fransgard offers a wide range of niche and specialised machines for field, forest and road work.
We develop our machines in close collaboration with our regular and new customers. For this reason our solutions are characterised by an extremely practical and down-to-earth attitude, ensuring a high level of operational safety, minimal maintenance requirements, durability and user-friendliness. We export many of our machines all over the world, even to very remote areas. At Fransgard we are committed to honouring our word and delivering a thoroughly tested product that meets or exceeds customer expectations. With us, you don’t just buy a machine – you buy the whole Fransgård concept.
Content: Page 3 Snow blower TTS Page 4 Snow blower S-255 Page 5 Snow blower S-220/245 Page 6 Snow blower S-220Hydr Page 7 Snow blower VSF Page 8 Snow blower V-230 Page 9 Extra equipment snow blower Page 10 Spreader SPR-250 Page 11 Spreader SPR Page 12 Spreader STS Page 13 Extra equipment spreader Page 14 Leveller GT-HY Page 15 Leveller GT-FL Page 16 Leveller GT-DK Page 17 Leveller GT-DKH Page 18 Extra equipment leveller Side 19 Chain mower FKR-HY Page 20 Chain mower FKR-BF Page 21 Chain mower FKR Page 22 Extra equipment Chain mower Page 23 Factory
2
Snow blower TTS-240-1 / TTS-240-3 / TTS-265-1 / TTS-265-3 Fransgards flagship is a 2-stage snow blower developed and tested in close cooperation with norwegian contractors which has resulted in a snow blower where capacity, functionality and design are superior.
The interaction between the auger (50 cm) and the discharge fan (85cm) provides large capacity and a smooth speed without any stops.The compact nose with middle and top flap which is easy to lubricate, ensures a good stearing of the snow and a good view for the pilot. The chassis of the snow blower is built with extra strong steel (Domex 420) in the fan and the sides, as well as Skids and wear steel in Hardox 500.
Model: Work Width: Work Width With side strip right/left: Work Width With hydraulic side strip right Discharge fan diameter Discharge fan housing depth Augur, diameter Middle hatch Share bolt magazine 3-point hitch category Gearbox RPM Gearbox effect nominal on PTO Effect requirement Push/front mount Weight
TTS-240-1 240 cm
TTS-240-3 240 cm
TTS-265-1 265 cm
TTS-265-1 265 cm
+15/+15
+15/+15
+15/+15
+15/+15
+ 35 cm 85 cm 35 cm 50 cm Std. Std. II/III 540 51 kW 80 HK Nei 1035 kg
+ 35 cm 85 cm 35 cm 50 cm Std. Std. II/III 540/1000 74 kW 80 HK Ja 1050 kg
+ 35 cm 85 cm 35 cm 50 cm Std. Std. II/III 540 51kW 90 HK Nei 1055 kg
+ 35 cm 85 cm 35 cm 50 cm Std. Std. II/III 540/1000 74kW 90 HK Ja 1070 kg
Extra equipment is found on page 9
3
Snow blower S-255-1 / S-255-3 / Proff Fransgard’s 2-stage snow blower is produced on the basis of many years of experience and a constant focus on functionality and updates. This machine is ideal if you want good capacity, work width up to 2,85 m as well as high reliability and quality. The S-255 snow blower comes in a model which can be towed behind the tractor (-1), as well as a model which can be pushed and fitted in front (-3). This model also comes in a special proff edition with a very tough 2-component paint (Proff). The compact nose with middle and top hatch which is easy to lubricate, ensures a good stearing of the snow and a good view for the pilot. The chassis of the snow blower is built with extra strong steel (Domex 420) in the fan and the sides, as well as Skids and wear steel in Hardox 500.
Model: Work width: Work width with side strip right/left Discharge fan diameter Discharge fan housing depth Augur, diameter Middle hatch hydraulically top hatch Share bolt magazine 3-point hitch category Gearbox RPM Gearbox effect nominal on PTO Effect requirement Push/front fitting Specific weight
S-255-1 255 cm +15/+15 80 cm 35 cm 43 cm Std. Possible Std. III 540 51 kW 80 HP No 1020 kg
S-255-3 / Proff 255 cm +15/+15 80 cm 35 cm 43 cm Std. Possible / Standard Std. III 540/1000 74 kW 80HP Yes 1035 kg
Extra equipment is found on page 9
4
Snow blower S-220-1 / S-220-3 / S-245-1 ECO Fransgard’s 2-stage snow blower is produced on the basis of many years of experience and a constant focus on functionality and updates. A snow blower for the price conscious customer who does not want to compromise on quality and functionality. This semiprofessional snow blower has the same high quality elements and capacity as the larger models. The compact nozzle with middle and top hatch with the possibility of lubrication, ensures perfect steering of the snow and a good view for the pilot. All models have Skids and wear steel in Hardox 500.
Model: Work width: Work width with side strip right/left Discharge fan diameter Discharge fan housing depth Augur, diameter Middle hatch hydraulically top hatch Share bolt magazine 3-point hitch category Gearkasse RPM Gearbox effect nominal on PTO Effect requirement Push/front fitting Specific weight
S-220-1 220 cm +10 / +10 66 cm 24 cm 35 cm Std. Possible Std. II 540 51 kW 60 HK No 560 kg
S-220-3 220 cm +10 / +10 66 cm 24 cm 35 cm Std. Possible Std. II 540/1000 74 kW 60 HK Yes 575 kg
S-245-1 ECO 245 cm +10 / +10 72 cm 28 cm 35 cm Std. Possible Std. II 540 51 kW 70 HK No 750 kg
Extra equipment is found on page 9
5
Snow blower S-220-3Hydr / S-245-3Hydr Fransgard’s hydraulically driven 2-stage snow blower model is produced based on the PTO driven models. The snow blower has a gear box specifically developed for hydraulically operation which is connected directly to a powerful oil engine. A snow blower which can be fitted both in front and back. It is ideal for front fitting on different vehicles and wheel loaders. All models have have Skids and wear steel in Hardox 500.
Model: Work width: Work width with side strip right/left Discharge fan diameter Discharge fan housing depth Augur, diameter Middle hatch hydraulically top hatch 3-point hitch category Gear box oil level/pressure Liter/Bar Gear box effect nominal on PTO Push/front fitting Specific weight
S-220-3Hydr 220 cm +10 / +10 66 cm 24 cm 35 cm Std. Possible II 125/180 51 kW Yes 575 kg
S-245-3Hydr 245 cm +10 / +10 72 cm 28 cm 35 cm Std. Possible II 125/180 51 kW Yes 750 kg
Extra equipment is found on page 9
6
Snow blower VSF-255 Fransgard’s largest V-model snow blower is manufactured with an eye for the details in order to achieve optimal functionality for the user and it has the best capacity within its class. This type of model is ideal if you have high requirements and a need for quick removal of the snow and if reliability is paramount. The V-blower with its asymmetrical design and its side displacement of the suspension provides the best possible clearance conditions. The 5 loose infeed wings and the large 85 cm chute fan provides a very high capacity and a long throw length. With reinforced edges, double wear steel at the edges, skids in Hardox 500 and 80% of the snow blower is produced in high strength steel, you get a unique ”Danish Viking”
Model: Work width: Work width with side strip right/left Discharge fan diameter Discharge fan housing depth Infeed wings quantity Middle hydraulically top hatch Share bolt magazine 3-point hitch category II HMV hitch PTO tap Power requirement Push/front fitting Specific weight
VSF-250 235/255 cm + 15 / + 15 85 cm 40 cm 5 pcs. Std. Possible Std. Optional Optional 1 ¾” 100 HK No 870 kg
Extra equipment is found on page 9
7
Snow blower V-230 This quality tested V-model snow blower has been on the market for many years and is continuously being developed and updated to customer demands. This snow blower meets the saying: ”rather small and fast than big and lazy” and at the same time it comes at a favorable price. The V-blower with 4 loose infeed wings provides high power and a heavy main shaft with 1 ¾” PTO. Hydraulically turnable 360° nose with a standard middle hatch with bolts that can be lubricated, which ensures minimal wear on the top hatch. With skids and wear steel in Hardox 500
Model: Work width: Work width with side strip right Discharge fan diameter Discharge fan housing depth Infeed wings number Nose hydraulically turnable Middle hatch Hydraulically top hatch 3-point hitch category PTO tap Power requirement Push/front fitting Specific weight
V-230 220 cm +10 cm 72 cm 24 cm 4 pcs. 360° Std. Possible II 1 ¾” 45 HP No 450 kg
Extra equipment is found on page 9
8
Extra equipment snow blower Part number
Text
Model
2227
Hydraulic top hatch
All models
2230 2232
Wheel set Wheel set
S-220/S-245 TTS-240/TTS-265/S-255
2235
Skids right/left
V-230
2200 2201 2202
Spring trigger Kat II/III Spring trigger Kat II Spring trigger Kat II/III
S-255 S-220/S-245 TTS
2221 2223
Loading nozzle Loading nozzle
S-220/S-245 TTS-240/TTS-265/S-255
2218 2219
Wear steel for the sides Wear steel for the sides
S-220/S-245 TTS-240/TTS-265/S-255
2205A 2213A/2213B 2215A/2215B 2218A/2218B 2228A/2228B
Side strip right Side strip right/left Side strip right/left Side strip right/left Side strip right/left
V-230 VSF-255 S-220 S-245 TTS-240/TTS-265/S-255
2229
Hydraulic side strip right
TTS-240/TTS-265
9
Spreader SPR-250 / 250H Fransgard’s smallest spreader with a 120 cm spread width can be delivered in 2 models. The spreader rotor is driven via a tow wheel, and is fitted with studded tires which deactivate the drive on the roller when moving in reverse. Can be fitted with 3-point hitch or tow bar (extra equipment). Hydraulic driven rotors function via a powerful oil engine managed by the oil flow of the tractor. The machine is suitable for compact tractors, ATV, forklifts etc. A perfect choice for housing associations, cemeteries, public administrations, private customers etc. that have the need for spreading coarse sand, sand/salt, crushed granite etc.
H
Model: Work width: Transport width Tank volume Body dimensions top Rapid emptying Self-loading Agitator Hydraulic outlet Hydraulic flow regulation 3-point hitch category Specific weight
SPR-250 120 cm 155 cm 250 L 56 x 120 cm No No No No No I/II 130 kg
SPR-250H 120 cm 140 cm 250 L 56 x 120 cm No No No 1 double Possible I/II 130 kg
Extra equipment is found on page 12
10
Spreader SPR-350/GA / -800/GA / -1000/GA / -1500/GA Fransgard’s robust and self-loading spreader with rotor spreads is extremely detailed and dependable. All models are available in painted or galvanised (GA) versions. The body is made out of high strength steel (Domex 420) with reinforced steel on top and underside. The hydraulic engine and flow regulation with a powerful drive chain operates the roller and agitator, which provides a uniform spreading of the material. The rotor is equipped with a stone release mechanism and rapid emptying. Spreaders are available in many sizes and ideal for spreading coarse sand, sand/salt, crushed granite etc. The spreaders are available with several different mounts which ensure flexible fitting (further information under extra equipment). The strong galvanisation expands the product lifetime considerably, especially when using salt.
Model: Work width: Transport width Tank volume Body dimensions top Stone releaser Rapid emptying Self-loading Hydraulic outlet Agitator Hydraulic flow regulation Mounts Specific weight
SPR-350/GA 120 cm 135 cm 350 L 80 x 120 cm Standard Standard Standard 1 double Standard Standard Optional 215 kg
Extra equipment is found on page 9
SPR-800/GA 150 cm 165 cm 800 L 106 x 150 cm Standard Standard Standard 1 double Standard Standard Optionald 320 kg
SPR-1000/GA 200 cm 215 cm 1000 L 106 x 200 cm Standard Standard Standard 1 double Standard Standard Optional 350 kg
SPR-1500/GA 230 cm 245 cm 1500 L 115 x 230 cm Standard Standard Standard 1 double Standard Standard Optional 440 kg
11
Strømaskin STS-1800GA Fransgårds selvlessende tallerkenspreder er bygget robust, med driftsstikre og gjennomtenkte detaljer. Den galvaniserte beholderen sikrer lang levetid på maskinen, selv i ekstreme arbeidsmiljøer. Strøkassen er laget i høystyrkestål (Domex 420) med slitestål i toppen og på undersiden. Tallerken og lukkebeslag er laget i rustfritt stål. Kraftig hydraulisk motor og kjedetrekk med et kraftig strammehjul til drift av skruen med progressiv stigning og omrører. Strømaskinen har justerbar åpning til tallerken og hydraulisk lukkebeslag for tilførsel av strømateriale. Spredesymmetrien kan justeres hydraulisk og spre fra 2 til 10 m. Stor solid ventilblokk med mulighet for manuell styring, er forberedt for EL-styring og EL-styring med GPS. Valgfritt oppheng: 3-punkt, Volvo BM, HMV Mulighet for lastesylinder til 3-punkt.
Modell :
STS-1800GA
Arbeidsbredde Transportbredde Beholder volum Kassemål topp Spredemængde Spredesymmetri Selvlessende Omrører Drift Oliemængde Olietryk min Oppheng/feste Egenvekt
2-10 m 232 cm 1800 L 220 x 120 cm 5-250 g/m2 Trinløs Mulighet Standard Hydraulisk 80 L 150 bar Valgfri 215 kg
Ekstrautstyr finnes på side 13
12
Extra equipment Spreaders Part number Text 3610 3626 3614 3627 3629 3631 3660 3662 3664 3666
Model Pull bar Spread limiter 50 cm Tarpaulin Tarpaulin Tarpaulin Tarpaulin Safety grid Safety grid Safety grid Safety grid
SPR-250 SPR-350/800/1000/1500 SPR-250 SPR-350 SPR-1000 SPR-1500 SPR-350 SPR-800 SPR-1000 SPR-1500
3632 3637 3636 3638 3640 3642 3644 3647 3648 3650 3730
Euro hitch / mount 3-point hitch / mount SMS hitch / mount Schäffer hitch / mount A-frame hitch / mount SMS hitch / mount Euro hitch / mount 3-point hitch / mount Volvo BM hitch / mount HMV hitch / mount 3-point hitch / mount
SPR-350 SPR-350 SPR-350 SPR-350 SPR-800/1000/1500 SPR-800/1000/1500 SPR-800/1000/1500 SPR-800/1000/1500 SPR-800/1000/1500 SPR-800/1000/1500 STS-1800
3621 3720
Load cylinder for 3-point Load cylinder for 3-point
SPR-350/800/1000/1500 STS-1800
3700 3702
Electrical-control STS-1800 Electrical-control with GPS STS-1800
Optional suspension
13
Leveller GT-250HY / GT-275HY Fransgard’s HY leveller is produced on the basis of several years of experience with mechanical levellers. The powerful hydraulic cylinder placed on top of the boom is well protected and ensures easy operation of the scraper that can be turned up to 300°. Manual, tool-free, 55 cm right or left sideways displacement of the scraper. A high-quality and functional leveller for smoothing and clearing gravel roads, forest roads, soil, snow, etc. The scraper is prepared for mounting stabilizer wheels which are easy to adjust individually, side plates right/left to restrain the material and a snow wing on the right side that scrapes the edge diagonally, so the snow does not fall down behind the scraper.
Model: Work width: Scraper height Offset adjustment mechanical right/left Hydraulic turnable blade Hydraulic output Turnable reinforced wear steel in Hardox 500 Push/front fitting Wheels Snow wing right Side plate 3-point hitch Weight
GT-250HY 250 cm 60 cm 55 cm 300° 1 double Standard Yes Possible Possible Possible Cat. I/II 450 kg
GT-275HY 275 cm 60 cm 55 cm 300° 1 double Standard Yes Possible Possible Possible Cat. I/II 475 kg
Extra equipment is found on page 17
14
Front leveller GT-250FL / GT-300FL Fransgard’s front fitted blade FL provides minimal load on front lift or front loader during work or when colliding with obstacles with the blade. Overload protection is provided by the three large springs, and the scraper automatically tilts into place after release. Ideal for e.g. clearing snow from small areas or cleaning of stable passages. The 2 powerful hydraulic cylinders provide a stable angle on the blade of up to 23° (telescope cylinder up to 35°, extra equipment) Optional reinforced steel and possibility for mounting rubber-wear strip.
Model: Work width Scraper height Offset adjustment mechanical right/left Hydraulic turnable blade Hydraulic output Turnable reinforced wear steel Hardox 500 Push/front fitting Wheels Snow wing right Side plate 3-point suspension Front loader bracket Weight
GT-250FL 250 cm 60 cm No 23°(35°) 1 double Standard Yes Possible Possible Possible Cat I/II EURO/SMS 450 kg
GT-300FL 300 cm 60 cm No 23°(35°) 1 double Standard Yes Possible Possible Possible Cat I/II EURO/SMS 490 kg
Extra equipment is found on page 17
15
Leveller GT-250DK/GT-275DK/GT-300DK For this leveller no job is too big and ”almost” no job is too little. Whether you are a contractor, farmer or live in the country side, Fransgard’s GT-DK leveller is the right choice. This well thought out product is built in high strength steel and is the only product in the market which has a unique turntable with changeable wear plates. The hydraulic cylinder is placed and well protected on top of the boom, ensuring the market’s best scraper turn around. Oval mounting of the top link and stepless setting of the wheel, provides af smooth leveling of the road. With hydraulic sideways adjustment and snow wing (extra equipment) the snow can be moved far out.
Model: Work width Scraper height Offset adjustment mechanical right/left Hydraulic turnable blade Hydraulic output Turnable reinforced wear steel Hardox 500 Push/front fitting Wheels turnable 360° Snow wing right Side plate Weight
GT-250DK 250 cm 70 cm 55 cm 300° 2 double Standard Yes Standard Possible Possible 780 kg
GT-275DK 275 cm 70 cm 55 cm 300° 2 double Standard Yes Standard Possible Possible 795 kg
GT-300DK 300 cm 70 cm 60 cm 300° 2 double Standard Yes Standard Possible Possible 815 kg
Extra equipment is found on page 17
16
Leveller GT-250DKH/GT-275DKH/GT-300DKH This top model within Fransgard’s levellers has the same great advantages as the GT-DK version. However the GT-DKH sets new standards within professional blades and has a unique construction of the 3-point hitch where the horizontal angle is set up to 20° at each side between the boom and the 3-point hitch which has the advantage that it does not overload the lift arms on the tractor. This blade always levels with the road and it makes an effective ”roof construction” resulting in the water running off the road. The reverse side of the blade has a smart construction which presses excess material down in the road when the driver reverse without turning the blade. A great advantage when arriving to an asphalt road.
Model: Work width Scraper height Offset adjustment mechanical right/left Hydraulic turnable blade Horizontal setting hydraulic Hydraulic output Turnable reinforced steel Hardox 500 Push/front fitting Wheels turnable 360° Snow wing right Side plate Weight
GT-250DKH 250 cm 70 cm 55 cm 300° 20°/20° 3 double Standard Yes Standard Possible Possible 940 kg
GT-275DKH 275 cm 70 cm 55 cm 300° 20°/20° 3 double Standard Yes Standard Possible Possible 955 kg
GT-300DKH 300 cm 70 cm 60 cm 300° 20°/20° 3 double Standard Yes Standard Possible Possible 975 kg
Extra equipment is found on page 17
17
Extra equipment Leveller Part number
Text
Model
2512 2514 2533 2545 2526
Wheel set Wheel set Side plate right/left Snow wing right Telescopic cylinder (up to 35°)
GT-HY GT-FL GT-HY/FL GT-HY/FL GT-FL
2527 2530 2546 2543 2544 2540 2542
Levelling plank w/wheel Side plate right/left Snow wing right Chock valve w/accumulator Chock valve Valve block 3 outputs w/overload Electrohydr. valve block 3 outputs
GT-DK/DKH GT-DK/DKH GT-DK/DKH All models All models GT-DK/DKH GT-DK/DKH
2518 2520 2519
Rubber wear-strip 250 cm (200 high) Rubber wear-strip 275 cm (200 high) Rubber wear-strip 300 cm (200 high)
All 2,50 m All 2,75 m All 3,00 m
Turnable wear steel
Optional when ordering
All models
18
Chain Mulcher FKR-125HY Hydraulich driven chain Mulcher, for mounting on reacharm, excavator, forestry machine ect. The Mulcher is mounted with 2 or 4 steel chains, of quality G100, which is extremely durable without being too hard, so they do not bust if they hit a rock or other hard material. With 1500 rpm it removes effectively the material that it hits on its way. Skids in Hardox 500, and the main frame in high tensile steel Domex 420. A powerful safety curtain minimizes the material to come out during work. FKR-125HY is very flexible and can work in many different positions and angles.
Model:
FKR-125HY
Working width Chains Chain size Chain quality Guide shoe Power requirement (oil) Weight
125 cm 2 or 4 pcs. 10 or 13 mm G100 Std. 90L / 180 bar 340 kg
Extra equipment is found on page 22
19
Chain Mulcher FKR-150BF / FKR-200BF Chain Mulcher for rear or front mounting on the tractor. The Mulcher is mounted with 2 or 4 steel chains of quality G100, which is extremely durable without being too hard so they do not bust if they hit a rock or other hard material. With 1500 rpm it removes effectively the material that it hits on its way. FKR-150BF can side shifted 35 cm each way. FKR-200BF has fixed 3-point hitch but the large working width of 2 m and the possibility to adjust the cutting height is perfect for keeping growth down between trees. A powerful safety curtain minimizes the material to come out during work. Skids in Hardox 500 and the main frame in high tensile steel Domex 420.
Model:
FKR-150BF
FKR-200BF
Working width Chains Chain size Chain quality Guide shoe PTO-speed power requirement Side adjustment 3-point hitch Weight
150 cm 2 or 4 pcs. 10 or 13 mm G100 Std. 1000 o/min. 70 Hp L/R 35 cm Kat. I/II 440 kg
200 cm 2 or 4 pcs. 10 or 13 mm G100 Std. 1000 o/min. 90 Hp No Kat. I/II 560 kg
Extra equipment is found on page 22
20
Chain Mulcher FKR-150 Chain Mulcher for clearing forest roads, ditches, road edges etc. The machine is very flexible and has a working angle between 35째 down and 90째 up. The Mulcher works from 2,4 m to 3,4 m from the center of the tractor with the side adjustment, wich keeps the machine close to the tractor All this makes the FKR-150 to one of the most flexible chain mulchers on the market, to for example narrow forest roads. At the same time is the operation and maintenance costs very low, to great benefit for the user. The Mulcher is mounted with 2 or 4 steel chains of quality G100, rotating at 1500 rpm. Power is transmitted by a power belt drive witch is transferring large effect it also absorbs the force that generates by the chains. Skids in Hardox 500 and the main frame in high tensile steel Domex 420. There is also a powerful safety curtain on the backside.
Model:
FKR-150
Working width Side offset Work area Chains Chain size Chain quality Hydraulic connections Skids PTO speed Minimum tractor weight 3-point hitch Weight
150 cm 100 cm -35째 / +90째 2 or 4 st. 10 or 13 mm G100 2 dobbeltv. Std. 540 o/min. min. 4 ton Kat. II/III 815 kg
Extra equipment is found on page 22
21
Extra equipment for Chain Mulcher Part number.
Text
Model
6110
Protection V-belt cover
FKR-150
6111 6112 6113
drag rails between skids drag rails between skids drag rails between skids
FKR-125HY FKR-150/150BF FKR-200BF
6114 6116 6118
Chain protection guard Chain protection guard Chain protection guard
FKR-125HY FKR-150/150BF FKR-200BF
6120
Check valve with freewheel by closed circuit
FKR-125HY
6125
Support wheel (rear mounted)
FKR-200BF
optional chain installation 10 mm or 13 mm
FKR-125HY/150/150BF
FKR-200BF
22
23
24