Waste & Biomass
Innovative Technology and the way we see Performance Long Experience Originally established in 1945, we have over six decades and three generations of experience. During these years, we have been noted for our flexibility and innovative spirit.
Premium Quality Franssons offers a range of hi-end equipment with the highest quality finishes to the smallest detail and manufactured with the best components and materials available on the market.
Innovation R & D + i Our design philosophy is that of continuous improvement. In the way of innovation we refine every detail that requires not only experience, but also the latest technology applied to machinery manufacture.
Technical Availability Availability is profitability - Minimum, fast and easy maintenance. - Spare parts in Stock. - Components available internationally.
How We Work Our machinery is based on the material to be processed: Following an analysis of the customer’s materials, we determine which would be the most appropriate settings to achieve maximum performance and profitability.
Meticulous Process Franssons Q-control is a quality control process, but not only do we analyse finished products, we also analyse every detail, every component until finding the most suitable.
Guaranty In our work we take design and satisfaction to the same point. Never compromising durability for performance or vice versa.
4
www.franssons.com
“
“
Wherever we are, we have the same goal: Being number one in the market, offering the best customer experience, offering high quality machinery and a cost effective structure.
www.franssons.com
5
RAMBO HAMMERCUTTERS How do they work? RAMBO shredders are Hammercutter ™ rotating cutting hammers.
The material is loaded onto the vibrating table which distributes it in a uniform and efficient feeding. Feeding rollers flatten and push the material into the shredder, where the rotor shreds the material, consisting of swinging hammers in a closed labyrinthine system. Main advantages: • For high capacity requirements • Resistant to contaminants • Sturdy machine • Equipped with knock sensor • Technical availability from 96% to 98%
Vibrating table Distributes the material in a continuous flow
Shreds materials: Industrial waste • Urban Waste • Biomass • Bark • Waste wood Granularity achieved: 40 - 100 mm. Capacity: 80 - 500 m³/h
X-Cross RotorTM More cutting surface More resistant
6
www.franssons.com
HammerCutter HammersTM Shear type cutting Resistant to contaminants
F-drive Transmission High efficiency Hydraulic Tensioner Hydraulic Brake
Main Engine (Not in picture) 200 kW to 1000 kW Hammercutter Rotor™ Shear cutting swinging hammers Feeding rolls They crush and push the material towards shredding
Disc brake Reduces braking time by 80%
Vibration sensor Alerts and stops the machine in case of rejection
Exit sieve Replaceable by 40 to 200 mm
Knock Sensor Alerts and stops the machine in case of rejection
Absolut Feeders Regulates feeding and compresses the material
Stark Kropp Manufacture Fewer joints More resistance
Hydraulic service opening Total access to the interior
QuickFinder Pre-setting keys to suit different types of material
www.franssons.com
7
RAMBO IN DETAIL The rambo is a rotating shredder with cutting swinging hammers (HammerCutter™)
It is ideal solution for harsh and demanding environments, where maximum availability and high capacity is required. F-drive transmission and engine Engine with V-belt transmission. Disc brake and hydraulic belt tension. X-Cross Rotor ™ It is a piece of high resistance and in turn of maximum balance. Equipped with long and short Hammers, forming a labyrinthine system to process the materials. HammerCutter™ Hammers Its cutting system against anvils provides high efficiency, its geometry allowing them to process fibrous materials such as plastics and textiles. Hammers can be recharged by welding, decreasing spare parts costs.
8
www.franssons.com
“
If the 8-ton rotor does not stop with an auxiliary brake, the rotor continues to rotate up to 30 min, after cutting the electric power supply.
“
Sieves Hydraulic opening system, allowing access to sieving sections, which allows variation of the exiting granularity.
www.franssons.com
9
QUALITY CONTROL 100% MADE IN SWEDEN
How is Franssons equipment manufactured? A good design is not enough to turn a machine into a Franssons. Components are equally important and we only accept the highest quality in the market. • We seek the highest quality components in the market and we conduct thorough checks thereon. • We analyse customer needs and evaluate possible specific manufacturing settings. • We select pieces of steel, 100% SSAB Oxelösund. • We cut, mill and weld all the mill parts in-house. Once completed, they are submitted to controls of: Manufacture Operation Power Consumption Processing Tests • We carry out strict quality controls on all our machines. • The Q-control sticker is the proof that this quality control has been conducted.
• Quality control 100% guaranteed.
10
www.franssons.com
“
“
Manufacturing a machine such as Rambo is only possible by combining the longstanding experience and an excellent manufacturing department.
www.franssons.com
11
WASTE RECOVERY The combination of a Franssons FRX shredder and a TXM-Rambo is the solution for highly demanding environments. • Combination of shredders and a system for separating rejections • Reliable and economical shredding system. • Separation of ferrous materials by magnet. • Separation of non-ferrous materials by Eddy Current / Foucault. • High resistance to contaminants. • Large output capacity.
12
www.franssons.com
Entrance
Destroyer Shredder
Magnet, Fe separation
Rambo Hammercutter
Non-Ferrous separator
www.franssons.com
13
HARD as MADE IN HELL
8 kg Hammers, 8,000kg Rotor + 850 rpm RESISTANCE TO CONTAMINANTS The swinging hammer system ensures that when a contaminant is introduced into the shredding system, it does not cause damages, because these are retracted into the rotor. In turn, the labyrinthine system prevents them from entering the sieve. The equipment as a whole has been developed to work with abrasive materials and a high level of contaminants. • Rotor speed: 40 m/s • Hammer speed: 49 m/s • Inertia: 22,000 N with blow strength of 8 kg • Hammer strength: Like dropping 8 kg from a height of 60 meters.
14
www.franssons.com
GENERAL SPECIFICATIONS TXM-102 Rambo
TXM-152 Rambo
TXM-202 Rambo
Entry 350 x 1070 mm Weight 12.000 kg
Entry 350 x 1570 mm Weight 17.000 kg
Entry 350 x 2070 mm Weight 21.000 kg
Main Engine 160 - 250 kW
Main Engine 200 - 315 kW
Main Engine 315 - 500 kW
Rotor length 1.000 mm Rotor diameter 1.100 mm Hammers 42 units. Sieve 40 - 150 mm
Rotor length 1.500 mm Rotor diameter 1.100 mm Hammers 58 units. Sieve 40 - 150 mm
Rotor length 2.000 mm Rotor diameter 1.100 mm Hammers 78 units. Sieve 40 - 150 mm
F-drive Transmission (Optional)
F-drive Transmission (Optional)
F-drive Transmission (Optional)
TXS-202 Superrambo
TXS-252 Superrambo
Entry 550 x 2250 mm. Weight 27.000 kg
Entry 550 x 2750 mm. Weight 34.000 kg
Main Engine 500 - 730 kW
Main Engine 730 - 1000 kW
Rotor length 2.000 mm Rotor diameter 1.600 mm Hammers 117 units. Sieve 40 - 150 mm
Rotor length 2.500 mm Rotor diameter 1.600 mm Hammers 147 units. Sieve 40 - 150 mm
F-drive transmission
F-drive transmission
www.franssons.com
15
AFTER SALES SERVICE
TURNKEY
TECHNICAL SERVICE official and exclusive technical service.
We offer small and large scale turnkey solutions. Contact us to study your project and needs.
NEAR YOU
ALL YOU NEED
SPARE PARTS Stock of spare parts guarantee maximum availability. PROTECTION PLANS We offer different maintenance plans: Basic, Professional and Total.
Franssons Spain
After Sales Service
Stack of Spare Parts
Franssons Máquinas de Reciclaje, S.L. Calle Platino 4, Pol. Ind. Sur Colmenar Viejo (Madrid), ESPAÑA Tel.: +34 918 469 000 franssons@franssons.es
Business Office
Testing Centre
Franssons Recycling Machines AB Timmervägen 8 Sundsvall, SUECIA Tel.: +46 60 56 78 60 franssons@franssons.se
www.franssons.com