Highlite catalogo 2011 pt 1 by carlo pesatori

The future of showtechnology starts here...

Vestastraat 2, 6468 EX Kerkrade, The Netherlands. +31 - (0)45 - 5667701 +31 - (0)45 - 5667709 sales@highlite.nl +31 - (0)45 - 5667706 +31 - (0)45 - 5667709 export@highlite.nl www.highlite.nl

2011 - 2012

Phone Sales: Fax Sales: Email: Phone Export: Fax Export: Email: WorldWideWeb:

Productcatalogue

Highlite International B.V.

This is a Highlite International B.V. publication. Design, concept, artwork, text and pictures* are copyright protected and may not be reproduced in any form without prior approval of Highlite International B.V. in the Netherlands. Information in this catalogue is subject to change. Highlite International B.V. has the right to refuse claims based on misprints or editorial-errors. (*with exception where otherwise stated). Concept, art & design: Graphic design dep. Highlite International B.V. All rights reserved 2011 ÂŠ

00_00_Intro_10_temp2011.indd 1

04.03.11 21:18

Table of Contents Inde In dexx de

DAP 100V

DMT Media Gear Displays & Screens AV Hard & Software AV Accessories

6 - 20 21 - 25 26 - 31

DMT AV Hardware Stands & Brackets AV Bags & Cases Stands & Brackets

32 - 36 37 + 40 38 - 39

DMT AV Adapters BNC Adapters Scart Adapters VGA/HDMI/DVI Adapters

41 41 41

DMT AV Cables AV Prefabcables AV Cables on Spool

41 - 43 44 - 46

100V Amplifiers Conference Systems 100V Hornspeakers Megaphones 100V Speakers 100V Accessories Overview

146 - 151 152 - 153 154 - 157 157 158 - 166 166 167

DAP Hardware Speakercomponents Speakerstands Speakerstand Accessories Microphonestands Mic.stand-Accessories Stand Miscellaneous Gear Racks 19 inch Hardware Flightcase Hardware Gear & Rack Lights

168 - 169 170 - 172 173 174 - 178 179 180 - 183 184 - 187 188 - 191 192 - 193 193 - 194

DAP Bags & Cases DAP Gear DJ Mixers Install Mixers Live Mixers CD Players Memory cards & sticks Audioprocessing Microphones Headphones Amplifiers Portable Soundsystems

48 - 51 52 - 54 55 - 59 60 - 70 70 71 - 78 79 - 92 93 94 - 101 102 - 103

DAP Recording Studio-Microphones Interfaces Studio-monitors Interior & Acoustics Accessories

104 - 106 107 - 108 109 110 111

DAP Speakers Entry Level Series Mobile Road Series Multifunctional Series High Grade Series Touring Series Install Series

2 00_00_Intro_10_temp2011.indd 2

112 - 113 114 - 123 124 - 125 126 - 135 136 - 141 142 - 145

Index

Roady & Tool Bags Protection Bags Standbags/19â&#x20AC;? Rackbags ABS Cases Roadcases Rackcases Stackcases

195 - 197 198 - 199 200 201 - 204 205 - 226 227 - 231 232 - 233

DAP Audio Adapters XLR - XLR Adpaters XLR - Jack Adapters XLR - RCA Adapters 3p. - 5p. DMX Adapters Miscellaneous Adapters Chassis Adapters Transformer Adapters Speakeradapters XCaliber XLR - XLR Adapters XCaliber XLR - Jack Adapters XCaliber XLR - RCA Adapters XCaliber Miscellaneous Adapters Neutrik Adapters

234 234 234 234 235 235 235 - 236 236 237 - 238 238 239 239 - 241 241

[Table of Contents] 04.03.11 21:18

Table of Contents Inde In dexx de

DAP Audio Connectors Neutrik Connectors / Chassis Jack Connectors / Chassis XLR Connectors / Chassis Speakercomponents / Chassis RCA / Cinch Connectors

Showtec Deco & Designlight 241 - 242 243 244 245 245

DAP Prefab Cables DAP Tools & Testers Prefab Speakercables Prefab Mic. / Linecables Prefab Line / Instrumentcables Prefab Guitarcables Prefab Patchcables Prefab Midi Cables 8-way Studiosnakes PC Interface Cables Prefab Power / Signal Cables

246 247 - 249 250 - 252 252 - 254 254 255 - 256 257 258 259 260 - 261

LED Tubes LED Colorpaint Bars LED Colorpaint Spots LED Panels & Shapes LED Starskies Flexilight Powersupplies Mirrorballs

282 - 283 284 - 295 296 - 297 298 - 301 302 - 305 306 - 319 320 - 321 322 - 323

Showtec Lighteffects Lighteffects Scanners Movingheads

324 - 347 348 - 351 352 - 391

Showtec Strobes & Blacklights DAP Multicore Stage & Multisnakes Stagewheels Empty Wheels & Boxes Multicore Accessories Multicore Cable Multicore Connectors How to connect

262 - 264 265 266 - 267 267 268 - 269 270 271

272 - 273 273 273 274 - 275 275 276 - 279

DAP Merchandise DAP Fan Gear

392 - 393 393 - 394 395

Showtec Lasereffects Lasereffect analog Lasereffect DMX Lasersoftware & Accessories

396 - 397 398 - 404 405

Showtec Parcans

DAP Cables On Spool Mic./Line Cables Line Instrument Cables Powermulticore Video Cables 75 Ohm Cat.-Cables Speakercables

Analog Strobes & Controllers DMX Strobes & Controllers Blacklights

280

Parcan 16 Parcan 20 Parcan 30 Parcan 36 Parcan 38 Parcan 46 Parcan 56 Parcan 64 Studiobeams Parcan Specials

406 407 407 408 - 409 410 410 411 - 412 413 - 415 416 - 418 419 - 429

Showtec Coloursheets & Caps Colorsheets Colorcaps

Index 00_00_Intro_10_temp2011.indd 3

[Table of Contents]

430 431

3 04.03.11 21:18

Table of Contents Inde In dexx de Showtec Lightessentials

Showtec Theatre & Stagelighting Floodlights Stageblinders Stage & Theatrebeams Followspots Griven Theatrelighting

432 - 433 434 - 439 440 - 441 442 - 443 444 - 447

Showtec Architectural Lighting Showtec Architectural Lighting

448 - 451

Showtec Lightbulbs Par 16 bulbs Par 20 bulbs Par 30 bulbs Par 36 bulbs Par 38/46 bulbs Par 56 bulbs Par 64 bulbs Reflector bulbs BC bulbs R7S bulbs G6.35 bulbs Multimirror bulbs LED Multimirror bulbs MR16 Strobe bulbs Halogen GX9.5 bulbs Halogen GY9.5 bulbs Halogen bulbs Halogen HPL bulbs Discharge bulbs Blacklight bulbs Miscellaneous bulbs

452 452 452 453 453 454 454 455 455 456 456 457-459 460 460 461 461 462 462 463 - 466 466 467

Showtec Lightcontrollers DJ Switches Dimmers / Chasers T-Bar Controllers Switchpacks Dimmerpacks DMX Lightcontrollers LED Lightcontrollers Specials Accessories DMX Software

4 00_00_Intro_10_temp2011.indd 4

536 537 - 540 541 - 542 543 543 544 - 546 546 547 - 548 549 550 551 - 553 554 - 556 557 - 567 568 569 570 - 571 572 - 573 574 - 575

Showtec Lightingstands Two-Stands with Truss Metal Stands Stands with T-Bars Followspot-Stands Wind-up Stands Standadapters

576 577 578 - 579 580 581 - 585 585

Showtec Rigging Showtec Clamps Doughty Clamps Miscellaneous Chainhoists

586 - 587 587 - 588 589 - 594 595 - 597

Showtec Truss 468 469 470 - 471 472 473 - 478 479 - 495 496 - 499 500 - 504 505 506 - 509

Showtec Foggers Showtec Foggers Antari Foggers Antari Foggers - Accessories Showtec Effects Antari Effects Effect Liquids & Scents

Roady Tools & Accessories Power Multi-Connectors Connectors 230V / 240V CEE Connectors 110V CEE Connectors 230 / 240V CEE Connectors 380V CEE Connectors 400V Extensioncords Power Multi-Cables Socketboxes Breakoutboxes T-Bars Powerdistributors & Panels DMX Connectors & Cables Stage Accessories Tapes Backdrops Stage-Elements

510 - 511 512 - 520 521 522 - 528 529 - 534 535

Index

Single Tube MC50 Step Truss PS30 Step-Truss FS30 Triangle Truss DT22 Triangle Truss PT30 Triangle Truss FT30 Triangle Truss GT30 Square Truss DQ22 Square Truss PQ30 Square Truss FQ30 Square Truss GQ30 Circles & Ellipses Foldable Truss FT50 Square Truss FQ50 Truss Accessories Truss Furniture PIT-Truss

599 600 - 601 602 - 603 604 - 605 606 - 607 608 - 609 610 - 611 612 613 614 615 616 617 618 619 620 - 621 622

Showtec Merchandise Showtec Fan Gear

623

IP-Ratings / Icon Index

624

[Table of Contents] 04.03.11 21:18

00_00_Intro_10_temp2011.indd 5

04.03.11 21:18

Displays & screens Med edia ia Gea earr Proscreen manual DMT SR/SL System for manual Proscreens. All DMT Proscreens with manual operation are equipped with a Speed Reducing and Self Lock (SR/SL) system ensuring comfortable use at anytime. The Speed Reducing mechanism allows to control the friction in order to maintain an average rolling speed. The screen retracts slowly and smoothly. The Self Lock function allows the user to lock the screen at any position. Simply hold the screen 3 seconds at the desired position and the screen will lock on its own.

Hanging brackets included!

Ordercode: Aspect: Size (diameter): Viewing Area: Length: Height: Weight: Gain: Viewing Angle:

100350

4:3 72” 1460 x 1100 mm 1584 mm 1328 mm 7 kg 1.0 160

100351

4:3 84” 1710 x 1280 mm 1864 mm 1508 mm 8,5 kg 1.0 160

100352

4:3 100” 2030 x 1520 mm 2204 mm 17,73 mm 10 kg 1.0 160

100353

4:3 120” 2228 x 1755 mm 2508 mm 1988 mm 13 kg 1.0 160

100355

100356

16:9 77” 1704 x 958 mm 1838 mm 1806 mm 7,8 kg 1.0 160

16:9 92” 2030 x 1145 mm 2204 mm 1818 mm 10 kg 1.0 160

100357

16:9 106” 2340 x 1320 mm 2508 mm 1973 mm 11,8 kg 1.0 160

100358

16:9 120” 2656 x 1494 mm 2831 mm 2052 mm 17,6 kg 1.0 160

Proscreen electric DMT Integrated Control for Proscreen Electric Screens DMT’s integrated controlsystem includes an inline switch, built in remote control system, 12V trigger, RS232/central control and external infrared receiver. This all-in-one integrated system ensures that these screens are suited for even the most demanding applications. Accessoires: Ir remote control External Ir receiver 10m Trigger cable

Hanging brackets included! Ordercode: Aspect: Size (diameter): Viewing Area: Length: Height: Weight: Gain: Viewing Angle:

100360

4:3 72” 1460 x 1100 mm 1744 mm 1323 mm 8,5 kg 1.0 160

100361

4:3 84” 1710 x 1280 mm 2034 mm 1503 mm 10,5 kg 1.0 160

100362

4:3 100” 2030 x 1520 mm 2354 mm 1743 mm 12,0 kg 1.0 160

100363

4:3 120” 2400 x 1800 mm 2724 mm 2023 mm 13,5 kg 1.0 160

100365

16:9 77” 1704 x 958 mm 2028 mm 1951 mm 10,3 kg 1.0 160

100366

16:9 92” 2030 x 1145 mm 2354 mm 1938 mm 11,8 kg 1.0 160

100367

16:9 106” 2340 x 1320 mm 2658 mm 1963 mm 13,3 kg 1.0 160

100368 100368

16:9 16:9 120” 120” 2656 2656x x1494 1494mm mm 2831 2831mm mm 2052 2052mm mm 17,6 17,6kgkg 1.0 1.0 160 160

Projection Screen 4:3 electric, Rear Projection The electrical rear projection screens from DMT are ideal when you need a screen for exceptional situations. The projection screens are equipped with a high quality rear projection screen fabric. The integrated motors are very quiet and powerful. Ideal for use in discotheques, theatres and in any situation where you don’t want to see the projector itself. These screens are also very suitable for laser projection.

Projection Screen 4:3 electric, Rear Projection Ordercode: Voltage: Diagonal size: Screen dimensions (WxH): Control: Weight: Gain: Viewing angle:

6 00_01_DMT_10_temp2011.indd 6

Displays & screens

100380

230V 120” (305 cm) 2,44 x 1,85 m Electric (Infrared) 16 kg 1,8 30°

100381

230V 150” (381 cm) 3,05 x 2,31 m Electric (Infrared) 30 kg 1,8 30°

100382

230V 180” (457 cm) 3,56 x 2,77 m Electric (Infrared) 35 kg 1,8 30°

[Media Gear] 04.03.11 21:38

Displays & screens Med edia ia Gea earr 4 Pole Insert Female white 90760

10A/250V/4kV/3

90767

4 Pole Insert Male white 90768

4 Pole Chassis Open bottom with clips

4 Pole Cablehood Top entry PG11/M20

10A/250V/4kV/3

90769

DMX Motor Screen Interface 100499

The DMT Motor Screen Interface allows you to control your projectionscreen by DMX. This compact 1 channel DMX interface controls the motor of your screen easily by your lighting desk ensuring you total control of your multimedia presentation.

4 Pole Coupler PG11/M20 90770

Technical information: Power supply: Maximum load: Power connector: Output connector: DMX-512: Settings: Dimensions: Weight:

AC 230V - 50 Hz 30 Watt Schuko 4 pole female XLR 3 pole, male - female Digital menu 260 x 140 x 100 mm (LxWxH) 1,52 kg

Xpress Mobile Screen Available models:

100420 100421 100422 100423 100424

70” 4:3 80” 4:3 100” 4:3 70” 16:9 80” 16:9

The DMT X-Press are one of the lightest and easiest to set up portable projection screens. They are equipped with a one button locking mechanism which makes it very easy to set up the screen. The screen can be ready in just 3 seconds. The self support arms are specially designed to sustain variable pressures at different angles and screen positions. This ensures the screen to extend freely.

Ordercode: Size: Viewing Area: Length: Height: Height (Black part): Weight: Gain: Viewing Angle:

100420

70” 1422 x 1067 1582 1860 560 5,2 kg 1.0 160

100421

80” 1625 x 1220 1785 2168 710 7,9 kg 1.0 160

100422

100” 2032 x 1524 2219 2275 600 9,2 kg 1.0 160

Displays & screens 00_01_DMT_10_temp2011.indd 7

100423

70” 1550 x 871 1710 1951 870 5,4 kg 1.0 160

[Media Gear]

100424

80” 1770 x 995 1916 2281 1050 6,1 kg 1.0 160

7 04.03.11 21:38

Displays & screens Med edia ia Gea earr Fastfold Screen Pro

DMT Fast Fold Screens feature an easy and sturdy design. There are no parts to install and no tools are needed as the frame and support utilize own connectors and come with turn knobs built in. Its robust frame ensures it can hold up to the toughest of challenges. With a design that focuses on fast and easy assembly, it’s the perfect solution for mobile presentations and performances. All fast fold screens come including flightcase and two fabrics: front-view and rear-view. Each fabric is separately packed in a protective cover to give it maximum protection.

Ordercode: Size: Viewing Area: Max. Height: Min. Height: Weight: Gain Front View: Gain Rear View: Viewing Angle Front View: Viewing Angle Rear View:

100430

100” 2032 x 1524 2421 2256 24,5 kg 1.0 0.8 160 140

Reinforced feet ensuring a strong base

Multiple fixing points for the fabric

Easy setup No tools required

Solid reinforced corners ensuring a rigid over-all structure

Including flightcase and extra protective covers for the fabrics

Compact when folded

100431

100432

120” 2438 x 1828 3416 2708 27 kg 1.0 0.8 160 140

150” 3048 x 2286 4207 3204 30 kg 1.0 0.8 160 140

100433

200” 4046 x 3048 4313 3204 34 kg 1.0 0.8 160 140

Dresskit for Fastfold Screen Pro Available models:

100440 100441 100442 100443

100” 120” 150” 200”

With these dress-kits DMT offers fire-retardant curtains to dress your fastfold screen to make it match to the environment or decor. These black curtains are ready to use on your fastfold screen as no extra tools or equipment is needed. Each set contains a left and right side curtain, bottom curtain, top curtain and all the extra necessary extension bars. A ready to use solution to give your fastfold screen a high class appearance.

Lower Skirt for Fastfold Screen Pro Available models:

100450 100451 100452 100453

100” 120” 150” 200”

The lower skirt is a fire retardant curtain to fit below your fastfold screen. It helps you to match your fastfold screen to the environment or decor.

8 00_01_DMT_10_temp2011.indd 8

Displays & screens

[Media Gear] 04.03.11 21:38

Displays & screens Med edia ia Gea earr Tripod Screen • Heavy duty aluminium combined with steel parts, light structure, portable. • Plastic finished parts, elegant appearance. • Easy operation, stable uphold. • In the junction of self-locking parts, adopted the design of steel parts welding into plastic parts, which maximum avoids any scratches on the post. • The surface has the characteristic of flame retardant and mildew resistant. Durable for daily usage without colour fading, deforming and still staying flat for optimum image quality. • Tripods to keep fixed standing.

100 inch

84 inch

100370

84” Screen on tripod

Technical information: Diagonal size: Screen size (WxH): Viewing area (WxH): Weight: Surface: Gain: Viewing angle:

100371

100” Screen on tripod

Technical information: 84” 176 x 133 cm 171 x 128 cm 10,5 kg Mott white 1,1 50 °

Diagonal size: Screen size (WxH): Viewing area (WxH): Weight: Surface: Gain: Viewing angle:

Displays & screens 00_01_DMT_10_temp2011.indd 9

100” 211 x 160 cm 203 x 152 cm 12 kg Mott white 1,1 50 °

[Media Gear]

9 04.03.11 21:38

Displays & screens Med edia ia Gea earr LED Pixel mesh P25 SMD Pro 101170

Rental version

Fullco Fullcolor outdoor LED screen SMD led system Easy to Eas t mount Easy to Eas t service Flight Fli ght Flightcase available Technical information: Tec Power Power supply: Power Pow consumption: Power Pow connector: Pixelpitch: Pixelp Pix elp Pixelconfiguration: Pixelc Pix elc Pixel/screen: Pixel/ Pix el/ Screensize: Scr Density(pixel/m2): Den Angle Ang of view: Luminance: Lum Best Bes viewing distance: Color Col temperature: Scanning Sca system: Grey Gre scale: Display Dis color: Ref Refresh rate: Dis Display mode: Control Con distance: Operating temperature: Ope Ope Operating humidity: IP rat rating: Dim Dimensions: WxH) WxH Weight: Wei

AC 230V - 50 Hz (+/-15%) 700W (peak) Powercon 25 mm 1 RGB full color SMD LED 32 x 64 (LxW) 1600 x 800 mm 1600 120° 2000 (cd/m2) 25 -100 m 6500K- 9500K Static status 256 grade each R/G/B 16777216 400Hz 1024 x 768, 800 x 600 < 100 m -20 - 50° 10% - 90% RH IP54 1600 x 800 x 140 mm (Lx18 kg

Accessoires (optional): Software incl. with PC cards 101320 - PC Interface and Software PCI Card Interface 101400 - S8020 Sendercard PCI-E for Pixelscreen / Mesh-Series New PCI-Express Card for use in newer PC’s max. resolution = 2048 px. Riggingmodule for Pixelmesh P25 smd 101366

Flightcase for 4 pieces Pixelmesh P25SMD Pro 101175

Measurements:

Without clamp

Technical information: Dimensions: 1660 x 760 x 1025 mm (LxWxH)

10 00_01_DMT_10_temp2011.indd 10

Displays & screens

[Media Gear] 04.03.11 21:38

Displays & screens Med edia ia Gea earr Pixelmesh P37,5 SMD RGB 101370

Module 60 x 60 cm

The new DMT Pixelmesh P37,5 SMD is a compact addition in our succesful range of LED screens. een It is light-weight and truly rental proof screen icawhich is very suitable for all mobile applications both indoor and outdoor. NeuuPower and dataconnection are made by Ne ntrik Powercon and Ethercon connection ensuring the best and reliable connection. tor Each panel is equipped with a data monitor testt LED and power monitor LED as well as a tes button for quick setup and controlling. olled ed The DMT Pixelmesh P37,5 SMD is controlled uby the widely known and accepted LED Studio software.

Technical information: Pixel Pitch: Pixel configuration: Size of each screen: Pixels per screen: Density (Pixel/m2): Viewing Angle: Luminance: Maximum Power: Average Power: Weight: Grey scale: Refresh rate: Control mode: Life Span: Working voltage: Protection rate: Power connection: Data connection: Mechanical connection: Compatible interface: 101416, 101417

37,5 mm 1 RGB full-color SMD LED 600 x 600 mm 16 x 16 711 120 degrees 860 cm/m2 80W 60W 5 kg 256 grade each R/G/B. 400 Hz LED Studio > 50.000 Hours 230V / 50 Hz IP-44 Neutrik Powercon Neutrik Ethercon Fastlock system 01, 101415, 101404, 101401,

Measurements:

Flightcase for 6pcs Pixelmesh P37,5 101371

Displays & screens 00_01_DMT_10_temp2011.indd 11

[Media Gear]

11 04.03.11 21:39

Displays & screens Med edia ia Gea earr Pixelmesh P18,75 SMD RGB

Special features: • P18 pitch • RGB in one LED’s • Lightweight frame • Easy to connect and mount.

NEW PRODUCT

101375

The Pixelmesh P18 is a high resolution addition in the already very popular Pixelmesh series. The P18 features the same structure as the P37,5 and therefore it is very easy to combine both pitches in one screen for creative video applications. Connections are done by Neutrik Powercon and Neutrik Ethercon connectors ensuring a trouble free use in any circumstances. Technical information: Pixel Pitch: Pixel configuration: Size of each screen: Pixels per screen: Density (Pixel/m2): Viewing Angle: Luminance: Maximum Power: Average Power: Grey scale: Refresh rate: Control mode: Life Span: Working voltage: Protection rate: Power connection: Data connection: Mechanical connection: Dimensions: Weight:

Flightcase for 6 pieces Pixelmesh P18,75 SMD RGB 101376 Dimensions (LxHxW): 737 x 660 x 870 (incl wheels) Weight: 42 Kg

12 00_01_DMT_10_temp2011.indd 12

Displays & screens

18,75 mm 1 RGB full color SMD LED 600 x 600 mm 32 x 32 2844 140˚ 1200 nits 100W 80W 4096 grade each R/G/B 400 Hz LED Studio > 50.000 Hours 230V / Hz IP-54 Neutrik Powercon Neutrik Ethercon Fastlock system 600 x 600 x 60 mm (LxWxH) 6,5 kg

NEW PRODUCT

Riggingmodule for Pixelmesh 101372

Without clamp

[Media Gear] 04.03.11 21:39

Displays & screens Med edia ia Gea earr Pixelscreen P10 Set 101420

2 x module incl. Flightcase

The DMT Pixelscreen P10 sets the new standard for massive outdoor screen presentations. Despite all other LED screens which are offered in the market now, brings this screen significant advantages compared to its competitors. It offers a massive light output from nearly 10.000 Nits which makes the screens very suitable for outdoor use in even the most sunny environments. All screens are calibrated and are prepared for automatic calibration with specialised software. Data connection are made by Neutrik Ethercon connectors offering you the best connection and reliability during use. Power connections are made by waterproof IP-rated connectors. Due to its very high refresh rate of 4800Hz the Pixelscreen P10 is also very suitable for live use in TV studios or for fast-moving pictures like sports.

Technical information: Power Supply: Maximum Power: Average Power: Full White: Viewing angle horizontal: Viewing angle vertical: Best viewing distance: Colour temperature: Refresh rate: Control Mode: Operating Temperature: Operating Humidity: Pixel Pitch: Pixels per Screen: Density (Pixel/m2): Cabinet area (sq.m) Display Colour: Pixel configuration: Brightness (nit) Power connector: Data connector: IP Protection rate: Input voltage: Control Software: Data cable: Accessoiries included: Cabinet material: Module Dimensions: Pixel configuration (R,G,B): Gray Scale (level): Dimensions: Weight:

AC 230V - 50 Hz 1420W (6,17A) 470W (2,07A) 1380W (6A) 120 degrees 60 degrees 10-100m 6500K-9500K 2400~4800 Hz LED Studio -10 ~ 50 10% - 90% RH 10,66 mm 96 x 72 px 8789 0,786 16 Million colours 1x Red, 1x Green, 1x Blue 10.000 Waterproof High Class Power Connector IP54 Neutrik Ethercon IP-65 Front / IP-54 Backside 240V / 50 Hz LED Studio, LS-150 Stand Alone Decoder CAT5E. Max lenght 100m, with booster 250m Flightcase, 2x powercable, 2x datacable. Aluminium 256 x 256 mm 1,1,1 65536 1024 x 768 x 175 41 kg

Riggingbars The riggingbars for P10 are dedicated bars to rig your P10 screen to your trussing. Up to 8 rows of cabinets can be mounted to the rigging bars. Delivery is including safetypin, hanging eyes and connection plates for another rigging bar. Please note that this rigging bar is a rigging tool and needs to be inspected each year. Please check your local regulations before using. Riggingbar for 1 pcs P10 101421

Riggingbar for 2 pcs P10 101422

Displays & screens 00_01_DMT_10_temp2011.indd 13

[Media Gear]

13 04.03.11 21:39

Displays & screens Med edia ia Gea earr Pixelscreen Module P16 MKII 101316

1024 x 768 mm

• Aluminium casing • Improved structure • Neutrik Connectors • IP65 front side , IP54 Backside • Average Lifespan: 50,000~100,000hrs • Cooling: Direct air convection • Full Color LED Pixel board • 16mm Pixel Pitch • Indoor and Outdoor • Module system for easy stacking and mounting

14 00_01_DMT_10_temp2011.indd 14

Displays & screens

Technical information: Power supply: AC 230 Volt Max. power consumption: 4,5A (1150 Watt) Module size: 256 x 256 mm Pixel Density: 1600 pixels/m Pixel Pitch: 16 mm LED/Pixel: 2R,1G,1B LED encapsulation: 546 Display resolution: 16 x 16 Optimal viewing distance: 14 m Optimal viewing angle: 70° Refresh rate: 1800 Hz Frequency changing: >/ 60 Hz/sec White balance: >/ 6000 CD/m Grey scale/color: >/16,7 M Display Input signal: RF, S-Video, RGB, RGBHV, YUV, YC Composition Power connection: Neutrik Powercon Data connection: Neutrik Ethercon (RJ-45) Control system: PCTV, DVI, Working temperature: -20° - 50° Dimensions: 1024 x 768 mm Weight: 45 kg Per Module

[Media Gear] 04.03.11 21:39

Displays & screens Med edia ia Gea earr Pixelscreen reen en P16 P16 MKII MKI KIII Set Set 101317

2 x module mod odul ulee in incl incl. cl.. Fl cl Flig Flightcase ight ig htca ht case ca se

Neutrik Ethercon Dataconnectors!

Pixelscreen 16/25 Guiding pin 101308

Riggingbar for 1 piece P16 101314

Flightcase for 2 pcs Pixelscreen P16 101312

Riggingbar for 2 modules P16 101313

Displays & screens 00_01_DMT_10_temp2011.indd 15

[Media Gear]

15 04.03.11 21:39

Displays & screens Med edia ia Gea earr DMT S8020 Sender Card 101401

for Pixelscreen/Mesh series

The DMT-S8020 is our universal sender card which works with our full range of DMT Pixelscreens and Pixelmesh systems. The DMT-S8020 is the latest generation sender card and gives you full control to your LED Screen. The sender card comes including DMT Visionstudio Software and all necessary cables. Please note that your laptop or PC needs an DVI output in order to drive the system.

Technical information: • • • • • • • • •

PCI Slot 5V input for use with Laptop Max. LED screen size 2048 x 640 pixels. Up to four cards can work together for large screens (up to 4096 x 1152) Full Color Capable to drive Real Pixel, Virtual Pixel, Full Color, Double Color and Single Color screens. Including DMT Vision Software Including DVI cable (35 cm) and RS232-cable Connection to LED screen by RJ-45 connector

DMT RP7010 Repeater 101410

for Signal of Pixelscreen/Mesh

Sender Box 101404

Incl. card & software

NEW PRODUCT

The DMT Senderbox is a ready to use solution to control your LED screen by your laptop. It has a built-in sender-card and powersupply. Just by connecting your Senderbox by USB to your laptop allows you to set all parameters of your screen or displaying any picture just by your laptop. The buttons on the front allow you to control the brightness of your screen easily in 16 steps. The DMT Senderbox comes complete with LED Studio software and all necessary connection cables.

Sender Box 101405

without Sender Card

NEW PRODUCT

Technical information: Power Supply: Power consumption: Power connector: Signal inputs: Signal output: Software: Connection:

LS-180 Videoprocessor (incl sender card) 101417

NEW PRODUCT

The DMT LS-180 is a state of the art scaler/switcher for LED Screens. It features built in sender cards and can therefore run without the need of any computer. The LS-180 is equipped with many source inputs including SDI. It features great functions such as Logo overlay and Subtitle overlay. Furthermore the LS-180 can be programmed that a switch between two sources can be done by a fade. Furthermore the LS-180 can also be connected by the computer for easy setup and downloading latest firmware and settings.The LS-180 is the perfect solution for the most demanding LED Screen rental and installation.

Outputs: 1 x DVI

1 x HDMI

Control: Source Switch: PIP: Alpha Key: Working Environment: Humidity: Dimensions: Weight:

Displays & screens

AC 100-240V 50/60 Hz 25 W PAL/NTSC PAL/NTSC Anologue HD Input VGA-UXGA SMPTE: 625/25 PAL, 525/29.97 NTSC,625/50p PAL, 525/59.94p, NTSC:1080i50,1080i59.94/60,720p50,720p59.94/60, VESA: 800x600x60Hz, 1024x768x60Hz, 1280x768x60Hz, 1280x1024x60Hz, 1600x1200x60Hz, 1920x1080x60Hz, 1920x1080x50Hz ITU-R BT.656,ITU-R BT.601,SMPTE 259M, SMPTE 292, SMPTE 297 SMPTE: 625/25 PAL, 525/29.97 NTSC, 625/50p PAL, 525/59.94p NTSC, 1080i50, 1080i59.94/60, 720p50, 720p59.94/60 VESA: 800x600x60Hz, 1024x768x60Hz, 1280x768x60Hz, 1280x1024x60Hz, 1600x1200x60Hz, 1920x1080x60Hz, 1920x1080x50Hz VESA: 800x600x60Hz, 1024x768x60Hz, 1024x768x75Hz, 1280x768x60Hz,1280x1024x60Hz, 1440x900x60Hz, 1400x1200x60Hz, 1600x1200x60Hz, 1920x1080x60Hz, 1920x1200x60Hz, 2048x1152x60Hz VESA: 800x600x60Hz, 1024x768x60Hz, 1024x768x75Hz, 1280x768x60Hz, 1280x1024x60Hz, 1440x900x60Hz, 1400x1200x60Hz, 1600x1200x60Hz, 1920x1080x60Hz, 1920x1200x60Hz, 2048x1152x60Hz, 2048x1536x60Hz 800x600x60Hz, 1024x768x60Hz, 1024x768x75Hz, 1280x768x60Hz, 1280x1024x60Hz, 1440x900x60Hz, 1400x1200x60Hz, 1600x1200x60Hz, 1920x1080x60Hz, 1920x1200x60Hz, 2048x1152x60Hz

1 x VGA

00_01_DMT_10_temp2011.indd 16

AC 230V/50 Hz 50W IEC DVI DVI LED Studio USB

Technical information: Power supply: Power Consumption: Inputs: 3 x Composite BNC 1 x S-Video DIN 4 3 x YPbPR BNC 1 x VGA DB15 1 x DVI

2 x SDI 2 x HDMI

RS-232, USB TCP/IP Support every signal alpha key operation PIP for SD with HD and HD with HD Supported 0°C~45°C 10% to 90% 480 x 268 x 145 2,56 kg

[Media Gear] 04.03.11 21:39

Displays & screens Med edia ia Gea earr

LS-150 Videoprocessor 101415

Technical information:

for LED Screen with PIP funct.

The DMT LS-150 is a powerful and high-performance LED Wall Video image processing device. It supports the input of multiple kinds of video image signals, able to conduct high-quality image zoom processing, finally connected to LED display in DVI full digital signal format. The LS-150 contains a special PAL/NTSC video deinterlacing processing chip and 1 highperformance format converting and image zoom processing chip. It can convert video image signal of different types, systems and formats such as DVI, RGB, HDTV, PAL/NTSC composite video and S-video into LED display in high quality. It is the ideal solution video image processing device for your DMT LED displays. The LS-150 supports easy operations and adjustment. The user can control signal shift in three methods, i.e. control panel or RS 232. The setup of LED display windows, adjustment of video picture parameters can be easily realized by the supplied setup software of the LS-150 by the user or through RS 232 serial port. Unlike computer-based video capture card scheme, once setup and adjustment are finished, the LS-150 will immediately become a separately controllable video image processing play control device which is easy to use. Main features: 1. Video Decoder Adjustments (NTSC, PAL) Brightness, Contrast, Hue,Saturation 2. Adaptive 2/4-line Comb filter for Two Dimensional Chrominance/ Luminance Separation 3. State-of-the-art Motion-Adaptive Deinterlace Processor 4. Intelligent Edge Deinterlacing 5. Digital Color/Luminance Transient Improvement (DCTI/DLTI) 6. Advanced 4x4 Pixels Interpolation Scaling Algorithm 7. Independent H and V Scaling Ratios 8. 10-bit Processing 9. User-defined Gamma Value from 0.4 to 3.99 10. 8 levels output brightness selection 11. Advanced 4-symbol LUT for H and V Zoom Scaler 12. Scaler Sharpness Control 13. User-defined Led Window Size and Location 14. User-defined PIP Window Size and Position 15. Flexible PIP display with one button executing 16. 8 Sources Directly Selected by Front Panel Button, Includes: 1 x DVI, 1 x VGA, 4 x CVBS, 1 x Y/C, 1 x YPbPr 17. Seamless switch between two input sources 18. Including Sender Card

LS-170 Videoprocessor (incl sender card) 101416

Inputs Nums/Type:

Video system:

1xRGBHV 1xDVI 1xYPbPr(HDTV) 4xCVBS 1xY/C(S-Video) PAL/NTSC

CVBS 1Vpp / 75 Ohm Scope/Impedance Y/C Y: 0.7Vpp / 75 Ohm Scope/Impedance C: 0.35Vpp / 75 Ohm RGB/DVI resolution 1280x1024@60Hz, 1024x768@60Hz, 800x600@60Hz RGB 0.7 Vpp / 75 Ohm Scope/Impedance YpbPr(HDTV) system

720p@60Hz, 1080i@60Hz

YPbPr(HDTV) Y: -0.3V ~ +0.7Vpp / 75 Ohm Scope/Inpedence Pb: -0.35V ~ +0.35Vpp / 75 Ohm Pr: -0.35V ~ +0.35Vpp / 75 Ohm Connectors

Outputs Nums/Type

RGBHV: 15pin DSub(female) DVI 24+1 DVI D YPbPr(HDTV): BNC 3 CVBS BNC Y/C 4pin mini DIN(female)

1xRGBHV 1xDVI RGB/DVI resolution 1024x768@60Hz RGB 0.7 Vpp / 75 Ohm Scope/Inpedence Connectors RGBHV: 15pin DSub(female) DVI 24+1 DVI D Others Control RS-232, Panel Button Power 100-240VAC 50/60Hz 60W max Operating Temp 5-40 degrees Humidity 15-85% Size 58mm (high) x 425mm(wide) x 275mm(deep) Weight 5.6 Kg

NEW PRODUCT

Technical information: Power supply: Power Consumption: Inputs: 3 x Composite BNC 1 x S-Video DIN 4 3 x YPbPR BNC 1 x VGA DB15 1 x DVI

10 x Audio RCA Outputs: 1 x DVI

AC 100-240V 50/60 Hz 25 W PAL/NTSC; 480i,576i PAL/NTSC; 480i,576i Anologue HD Input 480i,576i,480p,576p,720p50,720i60,1080i50,1080p50 1080i50,1080i60 VGA-UXGA, 1024x768x60, 800x600x60, 640x480x60 SMPTE: 625/25 PAL, 525/29.97 NTSC, 625/50p PAL, 525/59.94p, NTSC:1080i50,1080i59.94/60,720p50,720p59.94/60, VESA: 800x600x60Hz, 1024x768x60Hz, 1280x768x60Hz, 1280x1024x60Hz, 1600x1200x60Hz, 1920x1080x60Hz, 1920x1080x50Hz 48Kbps 24bit balance analog audio

1 x Audio RCA

VESA: 800x600x60Hz, 800x600x75Hz, 1024x768x60Hz, 1024x768x75Hz, 1280x1024x60Hz, 1920x1080Px60Hz VESA: 800x600x60Hz, 800x600x75Hz, 1024x768x60Hz, 1024x768x75Hz, 1280x1024x60Hz, 1920x1080Px60Hz 48Kbps 24bit balance analog audio

Control: Source Switch: PIP: AV Sync: Working Environment: Humidity: Dimensions: Weight:

RS-232, USB TCP/IP support every signal alpha key operation PIP for SD with HD and HD with HD supported 0째C~45째C 10% to 90% 480 x 268 x 145 2,56 kg

1 x VGA

Displays & screens 00_01_DMT_10_temp2011.indd 17

[Media Gear]

17 04.03.11 21:40

Displays & screens Med edia ia Gea earr Vision Stick 42250

The DMT Vision Stick is an innovative product for creative video application. Each Vision Stick is 100 cm long and has 76 Pixels (Pixel pitch 13,15mm). It has a compact and slim aluminium extrusion housing with a sliding profile at the back ensuring easy mounting. The DMT Vision Stick has built-in power-supply. So no extra power-supply or converters are needed. Just add power and data by the junction box and link up the Vision Sticks together. It can be controlled by standard DMX, allowing you to connect two pieces together on one DMX Universe. However in combination with our DMX Node 8 (50801) and Arkaos Software and an additional plug-in it is possible to run the DMX-1000k mode allowing you to connect up to 7 pieces on one universe (56 pieces on one Node). Key features: • High Brightness • High Pixel Pitch (13,15 mm) • IP-65 Rating • Vivid colours • Easy to set up • Easy cabling system • No additional power supplies needed. Technical information: Operating voltage: 110-240V AC Power Consumption: 25W max. per 1,0, Control: DMX-512 control max. length 2 m (152 pixels) DMX-1000K control max. length 7,5 m (588 pixels) Light Source: 76 3-in-1 RGB color LED’s LED Type: Full colour 5050SMD RGB Viewing angle: 120 degrees Pixel pitch: 13,15 mm (1000:76) Connection: 8 pin IP67 connector (data and power in 1 connector) Housing: Aluminium extrusion Fire protection: UL 94 V-2 IP rating: IP-65 Certification: CE certified Operating temperature: 0 deg to 40 deg. Dimensions: 1000 x 24 x 75,5 mm Weight: 1,9 kg

Flightcase for Visionstick: page 220 Bags & Cases, ordercode D7516

Junction box for Vision Stick 42260

Technical Information Power input: Neutrik Powercon Input Chassis Connector Data input: Neutrik 3 pole XLR connector Output: 8 Pin IP-68 Plug Dimension: 128 x 68 x 42 mm Weight: 220 gram.

Extensioncable for Vision Stick 42261

1,5 m

42262

42263

42264

10 m

42265

25 m

18 00_01_DMT_10_temp2011.indd 18

Displays & screens

[Media Gear] 04.03.11 21:40

Displays & screens Med edia ia Gea earr Pixelstrip P25 42270

NEW PRODUCT

Special features: • Plug and Play • Inexpensive • Klingnet-protocol controlled • Bright colors.

The DMT Pixelstrip is a strip with a length of 1m which contains 40 pixels with a pitch of 25mm. By connecting the strips to your DMT VIsionExpress software you can play any video or graphic by your laptop or macbook. The DMT Pixelstrip is controlled by Klingnet which ensures fast setup, easy control and a affordable price. Klinget is developed in collaboration with Arkaos, ensuring powerful tools and state-of-art functionalities. Data in and outputconnections are done by CAT-5. On the backside of the Pixelstrip there is M10 slidingprofile for easy and fast mounting of brackets and clampls. Technical information: Pixelpitch: 25 mm Control: Kling-Net Lightsource: RGB 5050SMD LED Viewing angle: 120 degrees Connection: CAT-5 IP-Rating: IP-23 Dimensions: 1000 x 35 x 105 mm Operating Ope ing voltage: volta vo ltage: ge: 24V 24V DC DC (by ( by dedicated dedica ded icated ted PSU, PS U, 42271) 42271) Weight: Weight Wei ght:: 2,5 2,5 kg Luminance: Lumina Lum inance ina nce:: nce 850 8 50 nits nits Refreshrate: Refres Ref reshra res hrate: hra te: 400 40 0 Hz Hz

PSU for 4x4 pieces Pixelstrip P25 42271

NEW PRODUCT

Displays & screens 00_01_DMT_10_temp2011.indd 19

[Media Gear]

19 04.03.11 21:40

Displays & screens Med edia ia Gea earr Pixelbattern P25 42275

NEW PRODUCT

The DMT Pixelbatten is a batten with a length of 1m which contains 160 pixels with a pitch of 25mm. The pixels are mounted in a configuration of 40x4 pixels. By connecting the batten to your DMT VIsionExpress software you can play any video or graphic by your laptop or macbook. The DMT Pixelbatten is controlled by Klingnet which ensures fast setup, easy control and a affordable price. Klinget is developed in collaboration with Arkaos, ensuring powerful tools and state-of-art functionalities. Data in and outputconnections are done by CAT-5. Technical information: Pixelpitch: Control: Lightsource: Viewing angle: Connection: IP-Rating: Dimensions: Operating voltage: Weight: Luminance: Refreshrate:

25 mm Kling-Net RGB 5050SMD LED 120 degrees CAT-5 IP-23 1000 x 140 x 105 mm 100-240V 50Hz/60Hz 4 kg 850 nits 400 Hz

Special features: • Plug and Play • Inexpensive • Klingnet-protocol controlled • Bright colors.

20 00_01_DMT_10_temp2011.indd 20

Displays & screens

[Media Gear] 04.03.11 21:40

AV Hard & Software Med edia ia Gea earr

Grand VJ 50223

Video Mixing Software

GrandVJ addresses the needs of novice and demanding VJs and DJs as well as musicians, visual artists, film makers and others looking for a real-time video mixing and authoring tool. Powerful video made easy Manipulate, trigger and mix video clips, animated text strings or live cameras in much the same way as mixing music to create a spectacular visual show. GrandVJ can mix up to 8 layers with a vast library of video effects and sound driven video generators. Works with all setups GrandVJ runs on both PC and Mac and accepts all common video and image formats. Its intuitive interface lets you turn your keyboard into a super controller for zipping through the functions. Need more? GrandVJ’s learn mode makes it a breeze to set up any MIDI controller. Hook it up and start the show! Easy as 1, 2, 3,... GrandVJ is very easy to customize to each user’s preferred setup. The interface can quickly be modified to fit individual needs and preferences. Mapping MIDI controllers is a breeze thanks to the new MIDI learn mode and you can even import predefined presets for specific MIDI controllers.

Supports almost everything On the mixing side, GrandVJ comes with an updated ArKaos effects library and a long list of automated video generators. GrandVJ also offers an extensive support for various media including most video and image formats; flash text and animations; and multiple camera inputs. Need some footage? The software installer that you can download from this web site already comes with some video loops to get you started.. Okay you need high quality? The boxed version comes shipped with an additional DVD-Rom containing 2.8 GB of high quality video footage ready to be mixed with the software. These additional loops are exclusively available with the box and can’t be obtained separately, they have been made especially for VJing purpose by professional VJ’s and Visual Artists from all over the world, chek the GrandVJ Artists page for more info. High performance for both PC and Mac Behind the scenes, GrandVJ speeds up with a state-of-the-art multi-threaded hardwareaccelerated graphical engine that supports multiple screens and very high-resolution video. Like all other ArKaos products, GrandVJ runs on both PC and Mac.

Technical Information Powerful video-mixing software No-limit performance and production State of the art multi-threaded hardware accelerated graphical engine A unique, easy-to-control, customizable interface Dual synth / mixer mode Real-time access to all mixing parameters Full MIDI / keyboard mapping of all mixing parameters Support for ReWire Multi-screen support Automated Video Generators Upgraded Effects Library, with more than 40 effects High-resolution output Support of most common media formats including Quicktime, Mpeg 2, Mpeg4, Windows Media, and Flash text and animations Multiple camera support Hardware accelerated video engine Support for multi-core CPU Compatibility with Mac and PC, all common file formats and all MIDI controllers

AV Hard & Software 00_01_DMT_10_temp2011.indd 21

[Media Gear]

Recommended minimum system configuration for smooth performances PC OS: Windows™ XP or Vista. Processor: Pentium™ IV 2 GHz recommended. RAM: 512MB, 1GB recommended. Media Component: QuickTimeTM 6.5.x (and up), Adobe FlashPlayerTM 9.0 (and up), DirectXTM 9.0c (and up). MAC OS: Mac OS X 10.4 (and up). Processor: Any Intel Mac, G4/1GHz (and up). RAM: 512MB, 1GB recommended. Media Component: QuickTimeTM 6.5.x (and up), Adobe FlashPlayerTM 9.0 (and up). PLATFORM INDEPENDENT Graphics processor: 3D accelerated graphics card required: nVidia GeForceFX 5200 (and up), Ati Radeaon 9200 (and up), Intel GMA 950 (and up), ... Free Space: 80MB - 1.5GB depending on the installer options.

21 04.03.11 21:40

AV Hard & Software Med edia ia Gea earr

Arkaos Media Master 50228

DMX video software for lighting designers

ArKaos MediaMaster 1.1 brings uncompromised control to 8 layers of high definition video to the lighting design industry. With its state-of-the-art video mixing engine, support for high resolution output, LED panel integration and full DMX support, it proves you don’t need to ruin yourself to integrate video performances to your light show. Since MediaMaster’s extensive fixture is supported by most console manufacturer, you’re directly in control!

Multi-threaded Engine

Built on ArKaos’ latest generation of technology, MediaMaster’s multi-threaded engine delivers blistering performance, by taking advantage of multi-core machines. MediaMaster 1.1 now comes with improved frame blending support allowing extremely smooth video playback even at slow speeds and software genlock making it possible to play several HD movies at up to 60 fps without dropping a single frame.

Total creativity Take total control of your media: position, scale, rotate, adjust transparency, alpha, colors, compose with other layers etc. MediaMaster supports major media formats, multiple video inputs, and provides more than 60 effects with controllable parameters. Guaranteed quality MediaMaster’s powerful video engine and integrated native decoders of MPEG 2/4, QuickTime photo JPEG and Adobe Flash (among other formats) guarantee a smooth and reliable playback of full HD media on all layers. LED Mapper compatibility MediaMaster currently includes the intuitive LED Mapper extension, the flexible software solution from ArKaos to drive LED panels.

Practical interface

All the above in the easiest to control media server software that ever existed, MediaMaster is even simpler to use than ArKaos VJ DMX.

Efficient media management

Need some footage? The software installer that you can download from this web site already comes with some video loops to get you started.. Okay you need high quality? The boxed version comes shipped with an additional DVD-Rom containing 4.1 GB of exclusive video footage in High Definition and Standard Definition.

A straightforward interface displaying all layer’s parameters simultaneously, as well as all layers preview, gives lighting designers improved visibility of their shows and the best ergonomics possible, version 1.1 can even generate a preview visual of your Soft Edge setup so you can’t go wrong!

With MediaMaster’s new media management system, you can store up to 60,000 visuals in more than 200 folders, delete and move files at your convenience without having to re-stack a programmed show.

This additional footage is exclusively available with the box and can’t be obtained separately, it has been provided by selected sources offering professional quality footage for video mixing software, check out the MediaMaster Content page for more info.

Audio Visualizers

MediaMaster’s audio visualizers are powerful visual animations that react to the audio input to create nice ambient visuals. Audio visualizers are perfect for clubs, live DJ performances and LED outputs.

22 00_01_DMT_10_temp2011.indd 22

AV Hard & Software

[Media Gear] 04.03.11 21:40

AV Hard & Software Med edia ia Gea earr

Technical information: • Software Genlocking to the output monitors for perfect playback up to 60fps without dropping frame • Frame blending for smooth playback even at very slow speed • Improved soft-edging algorithm • Support for movies with alpha channels • Build-in support for grandma MA-Net • Native support of H.264 through FFMPEG 0.5 • New Cropping effect • 8 independent video layers • Advanced Graphic engine: Fully hardware accelerated and Multi-threaded on multi-core CPUs • Optimized for HD movies, HD output support • Internal MPEG2-MPEG4 codec for enhanced reliability • Intuitive user interface • 60+ effects • 50+ text animations • Audio Visualization Generators • Media library of 255 folders and 255 visuals • Multiple video inputs (PCI card, FireWire DV / HDV, USB, etc.) • Total control of your media: 3D position/ rotation, movie speed, color levels etc. • Master brightness-contrast, keystone • Multi-Screen and Wide-Screen with soft-edge • MSEX Compatible: thumbnails preview and live output on your MSEX compatible lighting desk • Windows XP, Vista and Mac OSX compatible • 3 available fixtures: micro, tiny and full • Support of all common media formats (AVI, MPEG, QuickTime MOV, Flash, WMV, picture files etc)

AV Hard & Software 00_01_DMT_10_temp2011.indd 23

[Media Gear]

23 04.03.11 21:40

AV Hard & Software Med edia ia Gea earr

NEW PRODUCT

Arkaos Media Master Express 50224

The latest update of the successful media server software

Intuitive and powerful media server software MediaMaster Express allows anyone anywhere to exploit the possibilities of a powerful media server. It combines ease of use and high performance for an affordable price, making it the perfect solution for quick media management and playback from a DMX or MIDI controller. Technical information: Main features • Control video layers with just a few DMX?dimmers or MIDI notes • Work on a single DMX?universe or MIDI channel • Drag & Drop visuals directly on the main interface • Organize your shows with up to 64 patches of 64 cells • Control up to 3 parameters per cell via DMX?or MIDI • Optional fade time on trigger. Control interface • Computer keyboard • Any MIDI?controller compatible with your system • Simple DMX?lighting desk New in version 2.1 • Multi-monitor support on Windows Vista and Seven • New effects (Old Movie, Geometric Cylindrical Distortion, Iris) Detailed features • 8 independent video layers • Advanced Graphic engine: Fully hardware accelerated and Multi-threaded on multi-core CPUs • Optimized for HD movies, HD output support • Intuitive user interface • 60+ effects • 50+ text animations • Audio Visualization Generators • Support for movie’s audio through FFMpeg (supports most formats) • Support for Actionscrip3 in Flash animations and Flash Texts • Support for Quartz Composer .qtz files as Sources and Effects (Mac OS X only) • Media library of 255 folders and 255 visuals • Multiple video inputs (PCI card, FireWire DV / HDV, USB, etc.) • Frame blending for smooth playback even at very slow speed • Software Genlocking to the output monitors for perfect playback up to 60fps without dropping frame • Master brightness-contrast, keystone • Multi-Screen and Wide-Screen with soft-edge • Internal MPEG2-MPEG4 codec for enhanced reliability • Native support of H.264 through FFMPEG 0.5 • Support of all common media formats (AVI, MPEG, QuickTime MOV, Flash, WMV, picture files etc) • Support for movies with alpha channels

24 00_01_DMT_10_temp2011.indd 24

AV Hard & Software

[Media Gear] 04.03.11 21:40

AV Hard Software A V H ard & S oftware Med edia ia Gea earr Arkaos A-5 Media Server 50225

sivee perf siv pperformances erform erf ormanc orm ances anc es ArKaos A05 Media Server is the ‘light’ version of the A10, it allows impressive eed hi high gh defi defini nitio ni tionn tio at a reduced price. The A05 is perfect for setups that do not necessarily need definition smallll ins instal tallat tal lation lat ions: ion s: resolutions (up to 1280 x 1024). A05 guarantees optimal performance for sma installations: clubs, bars, touring bands, LED installations... Key Features: • Extractable hard drive to protect & carry your data • DMX connectors: 5 pin male and female XLR/DMX connector • 2 DVI output • 1 S-video output • A 500 GB hard drive for data and a 150GB hard drive for system • Industrial 2U rack case • Power supply: 105 - 240v, automatic commutation at 50-60hz • eSata, 3.5” floppy disk, Multi card reader, firewire • ArKaos VJ DMX / MediaMaster pre installed • Optional installation of LED Mapper extension • Ships with all software/OS pre-installed and tested • Fast recovery system (Ghost backup) Technical Information 1 HD resolution video output, up to 1920 x 1080 Full layer and output previews Can be controlled through DMX512, ArtNet, MIDI and TCP/IP Automatic Fade To Black Pixel accurate visual position 2 Video outputs, one for the software interface and one for the main video output.

1 drive for the software and one drive for the video data VGA, DVI, Composite and S-Video outputs One available slot for additional PCI card such as video acquisition. Industrial PC rack 2U, shock proof Power supply: 105 - 240v, automatic commutation at 50-60 Hz

Arkaos A-10 HD Media Server 50226

The ArKaos Media Servers contains all the hardware and software you need to perform a great interactive live visual performance. This is a very flexible solution since you can install any additional software or hardware which might be needed for your performance as on any computer. Below are the Key Features of the ArKaos Media Servers, however the configuration may vary depending on your needs. Technical Information HD resolution video output (standard resolutions plus 1920 x 1080, 2560 x 1024, 3840 x 1080) Full layer and output previews Can be controlled through DMX512, ArtNet, MIDI and TCP/IP Automatic Fade To Black Pixel accurate visual position VGA, DVI, Composite and S-Video outputs

2 video outputs for multiscreen/soft-edge 2 hard drives in RAID for a faster data processing 1 camera input (Composite, component, SDI) Up to 4 video inputs (as extra option) Integrated DMX converter Industrial PC rack 4U, shock proof Power supply: 105 – 240v, automatic commutation at 50-60 Hz

Arkaos DMX Dongle 50229

(compatible with Arkaos MediaMaster)

Used to connect your lighting console to Arkaos Media Master software. The Dongle is compatible with Arkaos software and therefore a great solution to trigger your visual content by your lighting desk. Technical information: Data input: Socket Dimensions: Weight:

USB (type-B) DMX In/Output 3 pin XLR Male 3 pin XLR Female Socket IP-20 95 x 68 x 42 mm Approx. 0,2 kg

AV Hard & Software 00_01_DMT_10_temp2011.indd 25

[Media Gear]

25 04.03.11 21:40

AV Accessories Med edia ia Gea earr DM-80

Deskmount Multimedia connection-interface

Technical Information Connection section front: Dimensions: Mounting dimensions: Weight:

100600

Technical Information

Dimensions: Mounting dimensions: Weight:

100602

100610

Dimensions: Weight:

Wallmount Multimedia connection-interface

Technical Information

Dimensions: Mounting dimensions: Weight:

100612

00_01_DMT_10_temp2011.indd 26

100603

WP-21

100611 Network RJ-45, Telephone RJ-11, VGA HD-15 pin female, PC audio mini jack, Video 1 RCA, Audio 2 RCA 125 x 94 x 113 mm (LxWxH) 116 x 87 x 97 mm (LxWxH) 0,7 kg

WP-23

Wallmount Multimedia connection-interface

Technical Information

Network RJ-45, VGA HD-15 pin female, PC audio mini jack 80 x 80 x 45 mm (LxWxH) 0,2 kg

Deskmount Multimedia connection-interface

Technical Information

Connection section front:

Wallmount Multimedia connection-interface

Technical Information Connection section front:

DM-100

AC 220V Schuko, Network RJ-45, Telephone RJ-11, VGA HD-15 pin female, PC audio mini jack 110 x 94 x 110 (LxWxH) 100 x 85 x 95 mm (LxWxH) 0,4 kg

WP-22

100601 AC 220V Schuko, Network RJ-45 cable, Telephone RJ-11 Cable, VGA HD-15 pin male cable, PC audio mini jack cable 140 x 127 x 120 mm (LxWxH) 125 x 113 x 110 mm (LxWxH) 0,4 kg

Connection section front: AC-220 Volt Schuko, 2x Network RJ-45, 2 x Telephone RJ-11, 2 x VGA HD-15 pin female, 2 x PC audio mini jack, 2 x Video 1 RCA, 2 x Audio 2 RCA, 4 x XLR female Dimensions: 216 x 216 x 190 mm (LxWxH) Mounting dimensions: 200 x 200 x 180 mm (LxWxH) Weight: 0,5 kg

Wallmount Multimedia connection-interface

Technical Information

Dimensions: Mounting dimensions: Weight:

AC 220V Schuko, Network RJ-45 cable, Telephone RJ-11, VGA HD-15 pin, PC audio mini jack 174 x 138 x 122 mm (LxWxH) 142 x 114 x 115 mm (LxWxH) 0,4 kg

WP-20 Connection section front:

Connection section front:

Deskmount Multimedia connection-interface

Technical Information

AC-220V Schuko, Network RJ-45, Telephone RJ-11, VGA HD-15 pin female, PC audio mini jack 135 x 125 x 120 mm (LxWxH) 123 x 111 x 112 mm (LxWxH) 0,4 kg

DM-81 Connection section front:

DM-80C

AV Accessories

Connection section front: Dimensions: Weight:

100613 Network RJ-45, VGA HD-15 pin female, PC audio mini jack, Video 1 RCA, Audio 2 RCA 80 x 80 x 45 mm (LxWxH) 0,2 kg

[Media Gear] 04.03.11 21:41

AV Accessories Med edia ia Gea earr MTP-1

MTP-2

MTP-3

90250

90251

90252

90253

Mountingplate for D-chassis connector

Mountingplate for Scart connector

Mountingplate for BNC connector

Mountingplate for VGA connector

MTP-5

MTP-6

MTP-7

MTP-Cover

Mountingplate for DVI connector

Mountingplate for 25 pole Sub-D connector

90254

90255

CW-4 90283

CW-2

Coverwindow 1-way

Coverwindow 4-way

90281

Cover for CAT6 Mountingplate

Motorscreen Switch 1 pole

90260

Cover for Motorscreen switch

CW-3

Coverwindow 2-way

90282

Coverwindow 3-way

WH-1

WH-2

90290

AV Accessories 00_01_DMT_10_temp2011.indd 27

90258

MS-1 Cover

90259

90256

90280

Mountingplate 2 x CAT6

MS-1

Blindpanel

CW-1

90257

MTP-4

Wallmount housing 1-way

[Media Gear]

90291

Wallmount housing 2-way

27 04.03.11 21:41

AV Accessories Med edia ia Gea earr PMP-1 Pop-up Multimedia Panel - 4 x Jack D7770 Dimensions front: 190 x 110 x 10 mm (LxWxH) Dimensions back: 160 x 80 x 50 mm (LxWxH) Weight: 0,84 kg

PMP-2 Pop-up Multimedia panel - 2 x Jack, 3 x RCA, 1 x XLR Male

PMP-3 Pop-up Multimedia panel - 2 x Jack, 2 x XLR Female

D7771 Dimensions front: Dimensions back: Weight:

D7772 Dimensions front: Dimensions back: Weight:

190 x 110 x 10 mm (LxWxH) 160 x 80 x 50 mm (LxWxH) 0,84 kg

PMP-4 Pop-up Multimedia panel - 2 x XLR Female, 2 x XLR Male

PMP-5 Pop-up Multimedia panel - 4 x XLR Female

D7773 Dimensions front: Dimensions back: Weight:

D7774 Dimensions front: Dimensions back: Weight:

190 x 110 x 10 mm (LxWxH) 160 x 80 x 50 mm (LxWxH) 0,84 kg

PMP-6 Pop-up Multimedia panel - 3 x RCA, 1 x VGA

PMP-7 Pop-up Multimedia panel - 2x XLR-female, 2x Speakon connector

D7775 Dimensions front: Dimensions back: Weight:

D7776 Dimensions front: Dimensions back: Weight:

190 x 110 x 10 mm (LxWxH) 160 x 80 x 50 mm (LxWxH) 0,84 kg

PMP-8 4x XLR Male

PMP-10 Empty Ground Box

D7777 Dimensions front: Dimensions back: Weight:

D7778 Dimensions front: Dimensions back: Weight:

190 x 110 x 10 mm (LxWxH) 160 x 80 x 50 mm (LxWxH) 0,84 kg

28 00_01_DMT_10_temp2011.indd 28

AV Accessories

190 x 110 x 10 mm (LxWxH) 160 x 80 x 50 mm (LxWxH) 0,84 kg

[Media Gear] 04.03.11 21:41

AV Accessories Med edia ia Gea earr Presenter Control Compact 100802

Multimedia centralized control system

The Presenter Control is a compact and yet versatile unit designed to select the signal of several sources for projection. It has inputs at the front and backside. Using a little software that comes with the unit, it is possible to operate the unit remotely from a computer. It is ideally suited to be used in conference rooms, multimedia rooms, college or classrooms. Content: • 1 control unit • 2 stereo audio cables: 3,5 mm jack - 1,4m - 3,5 mm jack • 2 stereo audio cables: 3,5 mm jack - 1,4m - 3,5 mm jack • 1 RS232 cable / serial port • 1 Power Adapter • 1 IR-emitting LED • 1 CD-Rom containing user manual and software for remote control Technical Information Features: 2 x 1 VGA switching 3 x 1 Video switching (one YUV component input optional) 5 x 1 Audio switching One built-in MIC input Built-in digital tuning module One bidirectional Interface for remote control Inputs / Outputs: PC2 VGA input PC2 audio input VIDEO 2 video input VIDEO 2 audio input MIC input PC1 VGA input PC1 audio input VIDEO 1 video input VIDEO 1 audio input S-VIDEO video input S-VIDEO audio input (YCbCr Input optional )

AV Accessories 00_01_DMT_10_temp2011.indd 29

[Media Gear]

VGA Output Video Output Audio Output Operational Environment: Windows 2000/XP, 128 MB 30 Meg HD, RS232 Serial Port Dimensions: Frontpanel 180 x 96 (wxh) Housing 160 x 75 x 95 (wxhxd)

29 04.03.11 21:42

AV Accessories Med edia ia Gea earr

Presenter Control 100801

Technical Information Power supply: AC 90-230V - 50-60Hz Signal inputs: Video: (RCA) 3 lines RGB signal: 3 lines Audio: 6 stereo lines (3,5 mm jack) 1 mic (6,35 mm jack) Signal outputs: Video:

Control inputs:

(RCA) 2 lines RGB signal: 2 lines Audio: 1 stereo line (3,5 mm jack) RS-232 interface: 2 lines Control panel interface: 1 line

Door detection: 2 lines Remote control interface: 1 line Infrared interface: 1 line Power supply connection: Electric screen: 1 line Lighting system: 1 line Projector: 1 line Amplifier: 1 line AUX: 1 line Dimensions: Dimensions:

483 x 126 x 44 mm (LxWxH) (main unit) 127 x 147 mm (LxW) (control unit)

VDA-15 101202

Technical information:

1:5 Video/Audio Distributor

The VDA-15 is designed for AV-studio or multimedia use where high quality is required for distributing signals over longer distances. Outputs are independent from each other. This way, overloading or even shorting one output will have no influence on the other outputs performance. When combining 3 units, audio can be distributed in 5.1 surround while video can be distributed in RGV of YUV thus enabling the highest AV-quality available. â&#x20AC;˘ Video and audio distribution amplifier â&#x20AC;˘ 1 input, 1 loop output - 5 outputs

30 00_01_DMT_10_temp2011.indd 30

Video distribution amplifier: Input Impedance: Coupling: Connector: Video gain: Bandwidth:

1 in: 1 loop: 5 out High-Z / 75 Ohm switchable AC / DC switchable BNC adjustable -3 dB at 300 MHz

Audio distribution amplifier: Gain: Connector: S/N ratio:

1 in: 1 loop: 5 out adjustable RCA/Cinch >80 dB

Power supply: Dimensions: Weight:

230 VAC +/- 10% 483 x 200 x 45 mm (LxWxH) 2,8 kg

AV Accessories

[Media Gear] 04.03.11 21:42

AV AV Accessories Accessories Med edia ia Gea earr

VD-15 V D-15 D15 101201

VGAD-12 V GADGA D-12 D12

11:5 :5 Video Vid ideo eo distributor dis istr trib ibut utor ut or

101220

• Video distribution amplifier • 1 input and 5 outputs • Video Signal Technical information: Video distribution amplifier: Input Impedance: Connector: Video gain: Bandwidth: Dimensions:

11:2 :2 VGA/Audio VGA GA/A /Aud /A udio ud io ddistributor/Amplifier istr is trib tr ibut ib utor ut or/A or /Amp /A mplililifififier mp er

• VGA Video eo and Audio di distr stribu ibutio tionn ampl aamplifier mplifi ifier er distribution • 1 input an and 2 outputs • VGA • Adjustable video & audio gain Technical information:

1 in: 1 loop: 5 out High-Z / 75 Ohm BNC fixed at 1 -0,1 dB at 75 MHz 163 x 120 x 45 mm (LxWxH)

VGA/Audio distribution amplifier: Controls: VGA input connector: Audio input connector: VGA output connector: Audio output connector: Bandwidth: Dimensions:

1 input, 2 outputs Video gain / Audio gain Standard 15 pin HD Sub-D RCA / Cinch Standard 15 pin HD Sub-D RCA / Cinch -0,1 dB at 75 MHz 163 x 120 x 45 mm (LxWxH)

Media Spinner 40169

The Media Spinner is a moving-base for a MultiMedia Projector or LCD TV. You can adjust a maximum of 540° pan movement with one DMX channel. Very suitable for trendy venues, exhibition or rental. Technical information: Indoor use DMX-512 Voltage: Power: Power connector: Video connector: DMX connector: DMX Channels: Base Main: Platform: Dimensions: Weight: Max. Load:

AC 220-240V-50 Hz 50W Schuko RCA 3 pole XLR male, female 4 20 mm Glass 5A 250V Fast Blow 20 mm Glass 10A 250V Fast Blow 395 x 385 x 255 mm (LxWxH) 17,2 kg 50 kg

AV Accessories 00_01_DMT_10_temp2011.indd 31

[Media Gear]

31 04.03.11 21:42

Stands & brackets AV Ha Hard rdwa rd ware wa re PLB-3 Adjustable bracket 100240

Measurements:

for 27” - 50” Plasma/LCD

Wallmount for large Plasma or LCD screens

Technical information: Max. Weight: Mounting plate: Tilt: Pan: Horizontal correction:

60 kg 800 x 500 mm (max.) 15 degrees 45 degrees (left and right) 5 degrees

PLB-4 Adjustable bracket 100241

Measurements:

for 23” - 47” Plasma/LCD

Technical information: 23”-37” screens Max. weight: 40 kg Tilt: 15 degrees down, 15 degrees up Pan: 180 degrees

PLB-5 Bracket 100242

degr adj.

Measurements:

for 37” - 60” Plasma/LCD 15

Technical information: Max. weight: 75 kg Mounting pattern: 820 x 500 mm (max.) Tilt: 15 degrees down Integrated bubble level Lockable arms Cable management system

PLB-6 Bracket 100243

degr adj

Measurements:

for 23” - 37” Plasma/LCD 15

Integrated cable system Integrated bubble level Lockable system

Technical information: Screensize: Max. weight: Max. tilt: Weight:

32 00_01_DMT_10_temp2011.indd 32

Stands & brackets

23-37 inch 40 kg 15 degrees 11,5 kg

[AV Hardware] 04.03.11 21:42

Stands & brackets AV Ha Hard rdwa rd ware wa re PLB-7 Bracket 100244

Measurements:

for 37” - 60” Plasma/LCD Fixed

Integrated cable system Integrated bubble level Lockable system

Technical information: Screensize: Max. weight: Weight:

37 - 60 inch 90 kg 11 kg

PLB-8 Bracket 100245

Measurements:

for 23” - 37” Plasma/LCD Fixed

Technical information: Max. weight: 50 kg Mounting pattern: 400 x 400 mm (max.) Lockable safety bar

PLB-9 Economical Bracket 100246

Measurements:

for 37” - 60” Plasma/LCD

Technical information: Max. weight: 75 kg Mounting pattern 800 x 500 mm (max.) Including lockable safety bar

PLB-10 Economical Bracket 100247

Measurements:

for 23” - 37” Plasma/LCD

Lockable safety bar

Technical information: Screensize: Max. weight: Weight:

23 - 37 inch 50 kg 8,6 kg

Stands & brackets 00_01_DMT_10_temp2011.indd 33

[AV Hardware]

33 04.03.11 21:42

Stands & brackets AV Ha Hard rdwa rd ware wa re LCD-104 LCD Bracket Short 100250

Measurements:

Up to VESA 200

Technical information: Max. weight: 20 kg Tilt: 10 degrees Aluminium construction Integrated bubble level, cable management Fits VESA 200, 100 x 200, 100, 75 standards

LCD-105 LCD Bracket Medium 100251

Measurements:

Up to VESA 200

Technical information: Max. weight: 18 kg Tilt: 15 degrees up, 10 degrees down Pan: 90 degrees left, 90 degrees right Fits VESA200,100 x 200, 100, 75 standards Aluminium construction Integrated bubble system, cable system

LCD-106 LCD Bracket Long 100252

Measurements:

Up to VESA 200

Technical information: Max. weight: 18 kg Tilt: 15 degrees up, 10 degrees down Pan: 90 degrees left, 90 degrees right Fits VESA200, 100 x 200, 100, 75 standards Aluminium contstruction Integrated bubble level and cable management

LCD-202 LCD Bracket Flatmount for 13” - 27” - Up to VESA 100

LCD-203 LCD Bracket Flatmount for 13” - 27” - Up to VESA 200

100253 Max. weight: 25 kg Fits VESA100, VESA75 standards Steel construction Safety screws

100254 Max. weight: 35 kg Fits VESA200, 100 x 200, 100, 75 standards Steel construction Safety screws

34 00_01_DMT_10_temp2011.indd 34

Stands & brackets

[AV Hardware] 04.03.11 21:42

Stands & brackets AV Ha Hard rdwa rd ware wa re LCD-404 100205

Measurements:

Luxury Ceiling bracket for LCD

Adjustable ceiling bracket for LCD

Technical information: Screen size: 10 - 30 inch Max. weight: 30 kg Vesa 50, 75, 100 mm Max. height: 850 mm Min. height: 500 mm Tilt: 20 degrees Pan: 190 degrees

PRB-6 Universal Wall Mount Bracket for Projector Adjustable 100238 Max capacity: 18Kg Adjustable length: 790-1235mm Height: 271mm Width: 244mm Adjustable Tilt: -5 / +15 Degrees Mounting plate: 210 x 250mm Material: Aluminium

Special features: • Built-in anti-theft cable lock • Capacity: 18Kg • Tilt Angle -5 / +15 Degrees • Integrated Cable management

PRB-1 Ceiling Bracket for LCD Projector Short

PRB-3 Projector bracket for LCD projector

100230 Diameter 130-320 mm Incl. pipe length 150 & 80 mm Max. 10 kg

100232 Min. Height: 120mm Max. Height: 1050mm Pipe diameter: 60mm Total Weight: 2,12 kg

PRB-4 Universal Ceiling Bracket for Projector

PRB-5 Universal Ceiling Bracket for Projector - Adjustable

100236 Max. weight: 13,5 kg Aluminium construction Adjustable tilt Integrated cable management

100237 Max. weight: 13,5 kg Min. height: 22,6 cm Max. height: 113,5 cm Adjustable tilt Integrated cable management Aluminium construction Easy installation

Stands & brackets 00_01_DMT_10_temp2011.indd 35

NEW PRODUCT

[AV Hardware]

35 04.03.11 21:42

Stands & brackets AV Ha Hard rdwa rd ware wa re

Plasma Trolley 1 100213

Technical information:

Plasma Trolly 3

100214

100215

Technical information:

Technical information: Max. Load weight: Max. Load size: Dimensions (LxWxH): Weight:

Plasma Trolley 2

Technical information: 50 kg 52” 750 x 720 x 1350 mm 25 kg

36 00_01_DMT_10_temp2011.indd 36

Max. Load weight: Max. Load size: Dimensions (LxWxH): Weight:

1,8 m, Black

Technical information:

Technical information: 50 kg 52” 850 x 720 x 1250 mm 22 kg

Stands & brackets

Black Min. Length: Max. Length: Max. load:

1000 mm 1800 mm 25kg.

[AV Hardware] 04.03.11 21:42

AV bags and cases AV Ha Hard rdwa rd ware wa re Plasma Case D7550B

Technical information: Dimensions: Weight:

1370 x 450 x 910 mm (LxWxH) 73 kg

Compact Plasma Case D7551B

for 42â&#x20AC;? Plasma

Technical information: Net Weight: Gross Weight:

59 kg 61 kg

AV bags and cases 00_01_DMT_10_temp2011.indd 37

[AV Hardware]

37 04.03.11 21:42

Stands & brackets AV Ha Hard rdwa rd ware wa re

Camerastand 1

Camerastand 5

• Fluid damping system ensures smooth camera movements • Positive pan and tilt controls • Built in bubble level • 2 stage legs • Double adjustable handle • Soft nylon carrying case with both a hand and shoulder strap

• Fluid head equipped with an ultra large platform with quick-release system for additional performance and -85°/+85° tilt angle • Long handle for a smooth movement • Ground spreader for a quick and easy setup and folding • Compatible with the EI-9911 dolly • Built in bubble level • 2 stage aluminium legs • Soft nylon carrying case with both a hand and shoulder strap • Spare 1/4” screwMin.

102001

102002

Technical information:

Min. height: Max. height: Max. Load: Weight:

640 mm 1330 mm 6 kg 4,2 kg

545 mm 1745 mm 10 kg 9,3 kg

Quick release camera plate Quick release camera plate Long handles for smooth movement Adjustable long handle Tilt lock

E-image Antislip pad

Fluid head with bowl

Pan lock

38 00_01_DMT_10_temp2011.indd 38

Stands & brackets

[AV Hardware] 04.03.11 21:43

Stands & brackets AV Ha Hard rdwa rd ware wa re

Camerastand 8 102003

Incl. Fluid Head

• 100 mm fluid head provides a smooth and easy tilt and pan action • Built in bubble level • 2 stage black aluminium legs • Ground spreader for a quick and easy setup and folding • Compatible with the EL-9911 dolly • Soft nylon case with both a hand and shoulder strap

JIB 30-250 cm 102020

Incl. Stand and Dolly

Technical information: Head attachment:

ø 75 mm, ø 100 for fluid ball or hemisphere head: Head not included Weight capacity: 15-18 kg Height Range: 300-2650 mm Pan Range: 360° Horizontal Extension: ø 3000 mm Counterweight: 30 kg Delivery including dolly, stand, counterweights and flightcases.

Technical information: Min. height: Max. height: Max. Load: Weight:

515 mm 1695 mm 10 kg 7,73 kg

Dolly for Camerastand 5-8 102004

Stands & brackets 00_01_DMT_10_temp2011.indd 39

[AV Hardware]

39 04.03.11 21:43

AV bags and cases AV Ha Hard rdwa rd ware wa re

Camera Gloves Protect your investment! The DMT Camera gloves are a Day-to-Day Camera Protection DMT provides camera protection what protects your video camera from shocks, bumps, scratches, dust and dirt and moisture. DMT Camera gloves give your camera the protection in order that it will be ready whenever you need to make that important shot.

D6704

Camera Glove 1 D6700

(fits Sony XD-Cam)

The Camera Glove 1 has been designed to fit Sony PDW camcorders and XD CAM. The product has a versatile and innovative design: Quick opening to access tape door, control buttons and panels, adjustable battery wrap to accommodate all battery sizes, allowing the use of wireless systems. The Fashionable design keeps in line with today’s camera image. The camera glove comes including carrying bag, extra rain cover and an accesory gear bag.

Camera Glove 2 D6701

(fits Panasonic camera’s)

The Camera Glove 2 fits Panasonic DSX and HD series camcorders The product has a versatile and innovative design: Quick opening to access tape door, control buttons and panels, adjustable battery wrap to accommodate all battery sizes, allowing the use of wireless systems. The Fashionable design keeps in line with today’s camera image. The camera glove comes including carrying bag, extra rain cover and an accessory gear bag.

Camera Glove 3 D6702

(fits Panasonic XJ camera’s)

The Camera Glove 3 fits Panasonic P2 series camcorders. The product has a versatile and innovative design: Quick opening to access tape door, control buttons and panels, adjustable battery wrap to accommodate all battery sizes, allowing the use of wireless systems. The Fashionable design keeps in line with today’s camera image. The camera glove comes including carrying bag, extra rain cover and an accessory gear bag.

All pictures are details from D6704

Rain Cover for camera’s D6710

The rain Cover 1 is an highly protective HD Rain Cover which is fabricated from waterproof material, water tight zippers, seam seal technology and crystal D6704 clear TPU panels on the camera’s control side. Hood flaps open for quick media changes (fits Sony DSR400/450/PDW F330/PDW F350) while providing protection against rain or dust. Top access opening features water tight Camera Glove 4 fits for Sony DSR400 and DSR 450. The product has a versatile and innova- zipper with overlapping hook and loop closer. Four zipper heads allow users quick and tive design: Quick opening to access tape door, control buttons and panels, adjustable battery easy access at any given point. A stiff polypropylene hood shields various types and sizes wrap to accommodate all battery sizes, allowing the use of wireless systems. The Fashionable of lenses, while the viewfinder is protected by a flexible sleeve with a strong elastic cuff. design keeps in line with today’s camera image. The camera glove comes including carrying The cover comes with a matt box extension which can easily be connected to the lens bag, extra rain cover and an accessory gear bag. hood, and a 16x9 VF extension sleeve.

Camera Glove 4

40 00_01_DMT_10_temp2011.indd 40

AV bags and cases

[AV Hardware] 04.03.11 21:43

BNC Adapters AV Ad Adap apte ap ters te rs BNC Adapters FVA03 - BNC M. > RCA F. 75 Ohm FVA03

FVA01 - BNC M. > BNC F. 75 Ohm

FVA04

FVA05 - BNC F. > BNC F. FVA05

FVA04 - BNC F. > BNC F. 75 Ohm

75 Ohm

FVA13 - VGA/F > VGA/F FVA13

FVA02 - BNC M. > RCA M. 75 Ohm

FVA01

BNC F. > RCA M. Connector FVA06

NEW PRODUCT

FVA10 - VGA/F > DVI/M

FVA02

VGA/HDMI/DVI Adapters / Scart FVA12 - DVI/M > HDMI/F FVA12

FV10 Scart adapter FV10 Video multi-transmission adapter in & out

FVA11 - DVI/F > HDMI/M

FVA10

FVA11

Prefab Power/Signal Cables Powercon / XLR Extension Cable Length

90480 90481 90482 90483 90484

NEW PRODUCT 75cm 150cm 3m 6m 10m

Powercon / RJ45 Extension Cable Length

90485 90486 90487 90488 90489

Powercon / Ethercon Extension Cable Length

90490 90491 90492 90493 90494

BNC Adapters 00_01_DMT_10_temp2011.indd 41

[AV Adapters]

NEW PRODUCT 50cm 150cm 3m 6m 10m

NEW NEW PRODUCT PRODUCT 50cm 150cm 3m 6m 10m

41 04.03.11 21:43

AV Prefabcables AV Ca Cabl bles bl es FV01 - Ø6 mm. BNC > BNC

FV02 - Ø6 mm. 3 BNC > 3 BNC Length

FV01150 FV0175 FV013 FV016 FV0110 FV0115

Length

1,5 m 75 cm 3m 6m 10 m 15 m

FV05 - Ø6 mm. 5 BNC > 5 BNC

FV023 FV026

FV34 - DVI > DVI Length

FV05150 FV053

Length

1,5 m 3m

FV343 FV346 FV3410 FV3415 FV3425

FV40 - HDMI > HDMI FV40150 FV403 FV406 FV4010 FV4015

Length

1,5 m 3m 6m 10 m 15 m

FV04 - Ø6 mm. 3 RCA/M > 3 RCA/M

FV03150 FV033 FV036

1,5 m 3m 6m

FOP01 - Toslink > Toslink Length

FV04150 FV043

Length

1,5 m 3m

FOP0175 FOP01150 FOP013 FOP016

FOP02 - Miniplug > Miniplug

0,75 m 1,5 m 3m 6m

FV06 - Scart > 3 RCA/M Length

FOP0275 FOP02150 FOP023 FOP026

Length

0,75 m 1,5 m 3m 6m

FV08 - Scart > 2 RCA/M and 1 RCA/F

FV06150

1,5 m

FV07 - Scart > 6 RCA/M Length

FV08150

00_01_DMT_10_temp2011.indd 42

3m 6m 10 m 15 m 25 m

FV03 - Ø6 mm. RCA/M > RCA/M Length

3m 6m

Length

1,5 m

AV Prefabcables

FV07150

1,5 m

[AV Cables] 04.03.11 21:43

AV Prefabcables AV Ca Cabl bles bl es FV09 - Scart > Scart

FV12 - Scart > 2 RCA/M and 1 S-VHS/M Length

Length

FV12150 1,5 m

FV09150 1,5 m

FV21- S-VHS > S-VHS

FV33 - VGA > VGA Length

Length

FV3375 0,75 m FV33150 1,5 m

FV21150 1,5 m FV213 FV216 FV2110 FV2115

3m 6m 10 m 15 m

FV30 VGA to 3 BNC/M

3m 6m FV3310 10 m FV3315 15 m FV3320 20 m FV333

FV336

FV31 VGA to 5 BNC/M Length

Length

FV30150 1,5 m FV303

FV31150 1,5 m

FV32 - DVI > 5 BNC/M

FV313

FV22 - Super VHS > 2 BNC/M Length

Length

FV32150 1,5 m FV323

FV22150 1,5 m

FV23 - IE1394 > IE1394

FV223

FV35 - Presenter Cable, VGA + RCA + Power Length

FV23150 1,5 m FV233

• Conductor: Oxygen-Free Copper Wire (OFC) • High conductivity, low resistance and high fidelity • Insulation: Low Density Polyethylene (LDPE), low capacitance between conductor and shield • Shield: High coverage spiral shield to eliminate Electric-Magnetic Interference • No interference between power and video cables • Easy handling, only one cable required for a beamer presentation

Length

6m 10 m FV3515 15 m FV3520 20 m FV356

FV3510

FV36 - VGA + Audio - VGA + Audio Length

FV36150 1,5 m FV363 FV366

3m 6m

AV Prefabcables 00_01_DMT_10_temp2011.indd 43

[AV Cables]

43 04.03.11 21:43

AV Cables on spool AV Ca Cabl bles bl es Triax cameracable

Triax Broadcast/Camera cable; 8 mm (RG-59)

Technical Information Conductor drains: Conductor insulation: Conductor resistance: Shield-1: Shield insulation: Shield-2: Outer Jacket: Nominal Capacitance: Nominal impedance: Weight/100 m:

D9485 Ø 17 x 0,18 mm Silver Plated Copper Ø 4,52 mm Foam Polyethylene 39,9 Ohm/km 16 x 8 x 0, 12 Silver Plated Copper Ø 6 mm PE 16 x 8 x 0,12 braided Oxygen Free Copper Ø 8 mm matte red PVC 54 pF/m 75 Ohm 9.5 kg

Conductor drains Ø mm: Conductor insulation: Conductor insulation Ø mm: Conductor resistance Ohm/m: Outer insulation: Working temperature: Voltage overflash: Nominal impedance:

D9461 0,4 PE 2,6 138 Ohm/km PVC 4,2 Ø in mm -20~50 °C (min./max.) 30V 75 Ohm

Double shielded RG-179 video cable

Technical Information

D9460 Ø 1 x 0,3 mm Oxygen Free Copper Ø 1,4 mm Foam Polyethylene 243,9 Ohm/km Aluminium 16 x 5 x 0,12 braided Oxygen Free Copper Ø 2,54 mm matte blue PVC 57,4 pF/m 75 Ohm 1,5 kg

Nominal Attenuation /100m: 71,5 MHz: 18.57 dB /135 MHz: 24.64 dB /270 MHz: 32.73 dB /360 MHz: 40.03 dB 540 MHz: 49.54 dB /750 MHz: 58.40 dB /1500 MHz: 83.33 dB /3000 MHz: 120.41dB

Audio/Video Cable A-symmetric 75 Ohm 100 m on spool

Technical Information

AV-20 Conductor drains: Conductor insulation: Conductor resistance: Shield-1: Shield-2: Outer Jacket: Nominal Capacitance: Nominal impedance: Weight/100m:

Attenuation: 10 MHz: 0,02270 /90 MHz: 0,18650 /100 MHz: 0,19060 /220 MHz: 0,30640 470 MHz: 0,76580 /770 MHz: 0,96420 /1000 MHz: 1,6122

AV-36

D9486 Ø 19 x 0,28 mm Silver Plated Copper Ø 6,6 mm Foam Polyethylene 10 Ohm/km 16 x 7 x 0,16 Silver Plated Copper Ø 8,6 mm PE 16 x 8 x 0,16 braided Oxygen Free Copper Ø 11 mm matte red PVC 53 pF/m 75 Ohm 18 kg

Nominal Attenuation /100m: 71,5 MHz: 4.7 dB /135 MHz: 6.6 dB /270 MHz: 9.8 dB /360 MHz: 12.15 dB 540 MHz: 15.24 dB /750 MHz: 17.1 dB /1500 MHz: 24.9 dB /3000 MHz: 36.1 dB

Audio/Video Cable 75 Ohm 100 m on spool

Technical Information

Triax Broadcast/Camera Cable 11 mm (RG-59)

Technical Information Conductor drains: Conductor insulation: Conductor resistance: Shield-1: Shield insulation: Shield-2: Outer Jacket: Nominal Capacitance: Nominal impedance: Weight/100m:

Nominal Attenuation /100m: 71,5 MHz: 6.2 dB /135 MHz: 8.5 dB, 270 MHz: 12.8 dB /360 MHz: 15.8 dB 540 MHz: 18.3 dB /750 MHz: 22.3 dB /1500 MHz: 32.8 dB /3000 MHz: 48.2 dB

AV-14

Triax cameracable

D9401

AV-48

Audio/Video Cable A-symmetric 75 Ohm 100 m on spool

Technical Information

D9402

Conductor drains Ø mm: Conductor insulation: Conductor insulation Ø mm: 1st shield: 2nd shield: Outer isolation: Outer isolation Ø mm:

OFC 20 x 0,12 PE red + transparent 1,3 OFC twisted 32 x 0,12 PVC dark blue 2x3

Conductor drains Ø mm: Conductor insulation: Conductor insulation Ø mm: 1st shield: 2nd shield: Outer isolation: Outer isolation Ø mm:

OFC 20 x 0,12 PE red + transparent 1,3 OFC twisted 32 x 0,12 PVC dark blue 2x4

Conductor resistance: Shield resistance: Capacity Inner cond Shield /Inner cond: Working temperature min./max.: Working Voltage overflash: Nom Impedance:

80 Ohm/km 50 Ohm/km

Conductor resistance: Shield resistance: Capacity Inner cond Shield /Inner cond: Working temperature min./max.: Working Voltage overflash: Nom Impedance:

80 Ohm/Km 50 Ohm/Km

160 pF/m -20~60 °C 30V 35 Ohm

Attenuation: 10 MHz: 0,02480 /90 MHz: 0,28000 /100 MHz: 0,28530 /220 MHz: 0,55350 /470 MHz: 1,33130 /770 MHz: 2,21180 /1000 MHz: 3,0271

44 00_01_DMT_10_temp2011.indd 44

160 pF/m -20~60 °C 30V 35 Ohm

Attenuation: 10 MHz: 0,02480 /90 MHz: 0,28000 /100 MHz: 0,28530 /220 MHz: 0,55350 470 MHz: 1,33130 /770 MHz: 2,21180 /1000 MHz: 3,0271

AV Cables on spool

[AV Cables] 04.03.11 21:44

AV Cables on spool AV Ca Cabl bles bl es AV-84 4-way Audio/Video Cable A-symmetric 75 Ohm 100 m on spool D9403

Technical Information

Conductor drains Ø mm: Conductor insulation:

OFC 20 x 0,12 PE red + transparent + yellow + blue

Conductor insulation: 1st shield:

1,3 (Ø in mm) OFC twisted 32 x 0,12 PVC dark blue 4 x 4 (Ø in mm) 80 Ohm/Km 50 Ohm/Km

2nd shield: Outer isolation: Outer isolation: Conductor resistance: Shield resistance:

Cap. Inner conduct. Shield /Inner conduct.: Working temperature: (min./max.) Working Voltage overflash: Nom Impedance:

160 pF/m -20~60 °C 30V 35 Ohm

Attenuation: 10 MHz: 0,02480 / 90 MHz: 0,28000 / 100 MHz: 0,28530 / 220 MHz: 0,55350 /470 MHz: 1,33130 / 770 MHz: 2,21180 / 1000 MHz: 3,0271

AV-80 Double Shielded Video Cable 75 Ohm 100 m on spool Technical Information

Conductor drains Ø mm: Conductor insulation: Conductor insulation Ø mm: Conductor resistance Ohm/m: Outer insulation: Working temperature: (min./max.) Voltage overflash: Nominal impedance:

0,58 PE 3,71 65 Ohm/km PVC 6,2 Ø mm -20~50 °C

Attenuation: 10 MHz: 0,01020 /90 MHz: 0,07210 /100 MHz: 0,06840 /220 MHz: 0,11920 470 MHz: 0,20150 /770 MHz: 0,28750 /1000 MHz: 0,35850

30V 75 Ohm

Black

D9463B

AV-100 Super-Flex Shielded Video Cable 75 Ohm 100 m on spool 0,58 PE 3,71 65 Ohm/km PVC 4,2 Ø mm -20~50 °C

D9463W

D9462

Technical Information

Conductor drains Ø mm: Conductor insulation: Conductor insulation Ø mm: Conductor resistance Ohm/m: Outer insulation: Working temperature: (min./max.) Voltage overflash: Nominal impedance:

White

Attenuation: 10 MHz: 0,02270 /90 MHz: 0,18650 /100 MHz: 0,19060 /220 MHz: 0,30640 470 MHz: 0,76580 /770 MHz: 0,96420 /1000 MHz: 1,6122

30V 75 Ohm

AV-150 Double shielded videocable HD-ready high flexibility (RG-59) 100 m on spool D9464

Technical Information

Conductor drains: Copper Conductor insulation: ene Conductor resistance: Shield-1: Shield-2: Outer Jacket:

Ø 7 x 0.3 mm Oxygen Free Ø 3,7 mm Foam Polyethyl34,85 Ohm 16 x 7 x 0,12 braided silver plated copper 16 x 8 x 0,12 braided Oxygen Free Copper Ø 6 mm matte blue PVC

Nominal Capacitance: Nominal impedance: Weight/100m:

56 pF/m 75 Ohm 7.0 kg

Nominal Attenuation /100m: 71,5 MHz: 10.0 dB /135 MHz: 12.5 dB /270 MHz: 17.7 dB /360 MHz: 20.3 dB 540 MHz: 25.3 dB /750 MHz: 31.5 dB /1500 MHz: 42.6 dB /3000 MHz: 60.7 dB

AV Cables on spool 00_01_DMT_10_temp2011.indd 45

[AV Cables]

45 04.03.11 21:44

AV Cables on spool AV Ca Cabl bles bl es AV-500 5 Way Video Cable 75 Ohm price per meter D9466

Technical Information

Conductor drains Ø mm: Conductor insulation: Conductor insulation Ø mm: Conductor resistance Ohm/m: Outer insulation: Working temperature: Voltage overflash: Nominal impedance:

0,58 PE 3,71 65 Ohm/km PVC 4,2 Ø in mm -20~50 °C (min./max.) 30V 75 Ohm

Media-Flex 113 Power+Audio+Coax. D9472

Technical Information

Price per meter Video cable (1x) Conductor drains: Conductor insulation: Conductor insulation: Conductor resistance: Outer insulation: Impedance: Attenuation:

Audio cable (1x) Conductor drains:

OFC 0,58 PE 3,71 mm 65 Ohm/Km PVC 4,2 mm 75 Ohm 10 MHz - 0,02270 90 MHz - 0,18650 100 MHz - 0,19060 220 MHz - 0,30640 470 MHz - 0,76580 770 MHz - 0,96420 1000 MHz - 1,6122 OFC 20 x 0,10

Conductor insulation: Conductor insulation: Filler material: 1st shield:

PE red + white 1,3 mm paper twisted copper NF 96x0,10 Outer isolation: Black Conductor resistance: 80 Ohm /Km Shield resistance: 30 Ohm /km Capacity inner conductor: 60 pF/m Capacity inner cond. shield/inner cond.: 78 pF/m Impedance: 110 Ohm Power cable Conductor drains: 3 x 1,5 mm2 Conductor insulation: PVC Black Working Temperature: -20 - +50 degree Voltage overflash: 30V

Media-Flex 123 Power+ 2 x Audio+Coax. D9473

Technical Information

Price per meter Video cable (1x) Conductor drains: Conductor insulation: Conductor insulation: Conductor resistance: Outer insulation: Impedance: Attenuation:

Audio cable (2x) Conductor drains:

OFC 0,58 PE 3,71 mm 65 Ohm/km PVC 4,2 mm 75 Ohm 10 MHz - 0,02270 90 MHz - 0,18650 100 MHz - 0,19060 220 MHz - 0,30640 470 MHz - 0,76580 770 MHz - 0,96420 1000 MHz - 1,6122 OFC 20 x 0,10

Conductor insulation: Conductor insulation: Filler material: 1st shield:

PE red + white 1,3 mm paper twisted copper NF 96 x 0,10 Outer isolation: Black Conductor resistance: 80 Ohm /km Shield resistance: 30 Ohm /km Capacity inner conductor: 60 pF/m Capacity inner cond. shield /inner cond.: 78 pF/m Impedance: 110 Ohm Power cable Conductor drains: 3 x 1,5 mm2 Conductor insulation: PVC Black Working Temperature: -20 - +50 degree Voltage overflash: 30V

Media-Flex 523 Power+ 2 x Audio+ 5 x Coax. D9474

Technical Information

Price per meter Video cable (5x) Conductor drains: Conductor insulation: Conductor insulation: Conductor resistance: Outer insulation: Impedance: Attenuation:

Audio cable (2x) Conductor drains:

46 00_01_DMT_10_temp2011.indd 46

AV Cables on spool

OFC 0,58 PE 3,71 mm 65 Ohm/km PVC 4,2 mm 75 Ohm 10 MHz - 0,02270 90 MHz - 0,18650 100 MHz - 0,19060 220 MHz - 0,30640 470 MHz - 0,76580 770 MHz - 0,96420 1000 MHz - 1,6122 OFC 20 x 0,10

Conductor insulation: Conductor insulation: Filler material: 1st shield:

[AV Cables] 04.03.11 21:44

00_01_DMT_10_temp2011.indd 47

04.03.11 21:44

DJ Mixers Gea earr

DS-CM-4 D2180

Club Mixer

• Multifunctional Entertainment Mixer • 10 inputs • 3 outputs • 45 mm faders • Cross fader • Master output with equalizer • Headphone with split function • LED indicators for Master signal

Technical Information Power Supply: Power consumption: Inputs: Line, Phono: Mic: Outputs: Master: Record: Headphone: Tone control master output: Indicators: Fader start: Dimensions: Weight:

AC 230V 15W 8 line, 2 phono, 2 mic Cinch unbalanced Combo jack/XLR balanced 1 master, 1 record, 1 headphone Cinch unbalanced Cinch unbalanced Jack 6,3 mm Stereo 60, 250, 1K, 4K, 12K LED indicators for Master Jack chassis 19” x 182 x 105 mm (LxWxH) 3,83 kg

Oxygen D2150

7 Channel multi-purpose DJ-Mixer

• 4 x 100 mm stereo fader with switch for 1 mic- and 2 line-inputs • 3 x 100 mm stereo fader with switch for 1 mic-, 1 line- and 1 phono-input • 2 x 100 mm Stereo Master fader with stereo/mono switch • 1 x stereo monitor (BOOTH) rotary • All channels with Hi-, Mid-, Low-control and send/return (effect) function • Headphone output with Master/Pre-fade Listening control • Effect control

48 01_02_DAP_Gear_10_temp2011.indd 48

DJ Mixers

[Gear] 04.03.11 21:56

DJ Mixers Gea earr

DS-CM-6 D2181

Club Mixer

• Multifunctional Entertainment Mixer • 10 inputs • 5 outputs • Fader start • 45 mm faders • Assignable cross fader • Manual and Auto Talk over function • Master output with equalizer • Headphone with split function • Led indicators for Master signal

Technical Information Power Supply: Power consumption: Inputs: Line, Phono: Mic: Outputs:

AC 230V 20W 8 line, 3 phono, 2 mic cinch unbalanced combo jack/XLR balanced 2 master, 1 booth, 1 record, 1 headphone Master: XLR balanced and cinch unbalanced Booth: cinch unbalanced Record: cinch unbalanced Headphone: jack 6,3 mm Stereo Tone control master output: 60, 250, 1K, 4K, 12K Indicators: LED indicators for Master DJ-light: BNC 12V/5 Watt Fader start: Jack chassis Dimensions: 19” x 178 x 105 mm (LxWxH) Weight: 3,83 kg

Technical Information Input/Output Impedance and sensitivity: Microphone: 3 mV, 6.8 K Ohm, +48V Phantom Powered Line: 150 mV, 22 K Ohm Phono: 2 mV, 47 K Ohm, 1000 Hz Rec Out: 775 mV nom, 1000 Ohm Master 1+2 Out (XLR): Headphones:

775 mV nom, 8.5 V max., 100 Ohm Unbalanced, 50 Ohm 2x 750 mW in 32 Ohm

Frequency response: Microphone/Line: Phono:

15 35.000 Hz, -3 dB 15 70.000 Hz, -3 dB

Output noisefloor at nominal settings: Microphone/Line: -76 dBu Phono: -71 dBu

Each channel with: • 3 inputs (mic. line/phono) • Gain control • Balance control and PFL-switch •

Effect/PFL switch + control

• • • •

Master 1 Stereo/Mono switch Master 2 Stereo/Mono switch Switch VU meter on: Master-1, Master-2, Pre-fade

•

Monitor-output control

•

Headphone control with PFL/Master-1 switch

Tone Control Line / Phono / Mic: Low: -18 dB, +18 dB at 30 Hz Mid: -12 dB, +12 dB at 1200 Hz High: -12 dB, +12 dB at 20.000 Hz Dimensions (LxWxH):

483 x 110 (128 mm incl. knobs) x 356 mm

DJ Mixers 01_02_DAP_Gear_10_temp2011.indd 49

[Gear]

49 04.03.11 21:56

DJ Mixers Gea earr

DS-CM-8 D2182

Club Mixer

• Multifunctional Entertainment Mixer • 10 inputs • 5 outputs • Assignable crossfader • Low, Mid, High tone control for each channel • LED indicators for Master and PFL signal • USB connection

50 01_02_DAP_Gear_10_temp2011.indd 50

Technical Information Power Supply: AC 230 V- 50 Hz Power consumption: 15,5 W Inputs: 7 line, 4 phono, 2 mic Line, Phono: cinch unbalanced Mic: combo jack/XLR balanced Outputs: 2 master, 1 booth, 1 record, 1 headphone Master: XLR balanced and cinch unbalanced Booth: cinch unbalanced Record: cinch unbalanced Headphone: jack 6,3 mm Stereo Channel control: Gain, Low. Mid, High Indicators: LED indicators for Master and PFL Dimensions: 19” x 185 x 105 mm (LxWxH) Weight: 3,9 kg

DS-CM-10 D2183

Clubmixer

• Adjustable crossfader • Gain,low,mid,high, pan control for each channel • Talk-over function • Headphone with split function • Zone output with low and high frequency control

DJ Mixers

Technical information: Power supply: AC 115/230V - 50/60 Hz Power consumption: 50W Inputs: 4 line (RCA), 2 phono (RCA), 3 AUX (RCA), 2 mic (combo jack) inputsignal: line 10KOhm/-14dB, AUX 47KOhm/-14dB, Phono 47KOhm/-14dB Outputs: Master (XLR balanced / RCA), zone (RCA), record (RCA), phone (jack) SN ratio: >90dB Frequency response: 20-20 kHz Indicators: 10 segment LED each channel and master Dimensions: 483 x 177 x 100 mm (LxWxH) Weight: 3,4 kg

[Gear] 04.03.11 21:56

DJ Mixers Gea earr

DS-CM-12MP3 D2184

Clubmixer with MP3 player

• Adjustable crossfader • Gain,low,mid,high, pan control for each channel • Talk-over function • Headphone with split function • Zone output • SD card reader with pitch control, loop, folder search Technical information: Power supply: Power consumption: Inputs: inputsignal: Outputs: SN ratio: Frequency response: SD card: Indicators: Dimensions: Weight:

AC 115/230V - 50/60 Hz 50W 4 line (RCA), 2 phono (RCA), 3 AUX (RCA), 2 mic (combo jack) line 10 kOhm/-14dB, AUX 47kOhm/-14dB, Phono 47kOhm/-14dB Master (XLR balanced / RCA), zone (RCA), record (RCA), phone (jack) >90dB 20-20kHz Max. 4 GB 10 segment LED indicator for master 483 x 177 x 100 mm (LxWxH) 3,4 kg

DJ Mixers 01_02_DAP_Gear_10_temp2011.indd 51

[Gear]

51 04.03.11 21:56

Install Mixers Gea earr

EM-51 D2160

Installation mixer

10 line inputs 2 phono inputs 2 mic inputs 3 Master outputs (2 with tone control) 1 rec output Adjustable talk over function Technical Information Power supply: AC 230V - 50Hz Power consumption: 1A Line: cinch unbalanced, 150mV/50K Phono: cinch unbalanced, 2,6mV/51K Mic: combo jack/XLR balanced, 1,5mV/1K Master: XLR balanced, cinch unbalanced Rec: cinch unbalanced Headphone: Stereo jack, 300mV

Frequency response: Total harmonic distortion: Stereo seperation: Signal to noise ratio: Dimensions: Weight:

20Hz - 20kHz <0,03% > 45dB mic 70dB, phono 60dB, line 78dB 483 x 100 x 89 mm (LxWxH) 4,10 kg

EM-7.2 Installation Mixer

D2161 Multifunctional compact installation mixer

• 10 line inputs • 2 phono inputs • 2 mic inputs • 3 Master outputs • 2 Master outputs with low,mid and high frequency control • Adjustable talk over function • Headphone with adjustable split function • External power supply • Rec. out (with switch for mic on/off) Technical Information Power supply: AC 230V - 50Hz Power consumption: 1A Inputs: 10 line, 2phono, 2 mic Line: cinch unbalanced, 150mV/50K Phono: cinch unbalanced, 2,6mV/51K Mic: combo jack/XLR balanced, 1,5mV/1K Outputs: 3 masters, 1 rec, 1 headphone Masters 1 & 2: cinch, XLR balanced, 0,75/1,5V Master 3: cinch, 0,75V

52 01_02_DAP_Gear_10_temp2011.indd 52

Rec: Headphone: Frequency response: Total harmonic distortion: Stereo seperation: Signal to noise ratio: Dimensions: Weight:

cinch unbalanced, 0,75V stereo jack, 300mV 20Hz - 20kHz < 0,03% > 45dB mic 70dB, Phono 60dB, Line 78dB 483 x 100 x 89 (LxWxH) 4,20 kg

Install Mixers

[Gear] 04.03.11 21:56

Install Mixers Gea earr

EM-7.3 Installation Mixer D2162

• • • • • • • • •

Multifunctional compact zone mixer

10 line inputs 2 phono inputs 2 mic inputs 3 separate selectable outputs (zones) Master outputs with low,mid and high frequency control Adjustable talk over function Headphone with adjustable split function External power supply Selectable record mode for each zone

Technical Information Power supply: AC 230V - 50 Hz Power consumption: 1A Inputs: 10 line, 2phono, 2 mic Line: cinch unbalanced, 150mV/50K Phono: cinch unbalanced, 2,6mV/51K Mic: combo jack/XLR balanced, 1,5mV/1K Outputs: 3 zones, 1 rec, 1 headphone Zones: cinch, XLR balanced, 0,75/1,5V

Rec: Headphone: Frequency response: Total harmonic distortion: Stereo seperation: Signal to noise ratio: Dimensions: Weight:

cinch unbalanced, 0,75V stereo jack, 300mV 20Hz - 20kHz < 0,03% > 45dB mic 70dB, Phono 60dB, Line 78dB 483 x 100 x 89 (LxWxH) 4,30 kg

Install Mixers 01_02_DAP_Gear_10_temp2011.indd 53

[Gear]

53 04.03.11 21:56

Install Mixers Gea earr

IM-53 Installation Mixer D2178

Multifunctional Zone Mixer • 9 inputs • 3 separate selectable outputs (zones) for each channel • Master outputs with low, mid and high frequency control • LED indicators for each output zone • Use 1HE blindpanel to create extra space for connections (D7801) Technical Information Power Supply: Power consumption: Inputs: Line, Phono: Mic: Outputs: Master: Headphone: Tone control master output: Indicators: Dimensions: Weight:

AC 230V-50Hz 15W 6 line, 2 phono, 1 mic cinch unbalanced combo jack/XLR balanced 3 Separate Zones XLR balanced and cinch unbalanced jack 6,3 mm Stereo Low. Mid, High 11 segment LED indicators for Master and PFL 19” x 132 x 177 mm (LxWxH) 3,85 kg

54 01_02_DAP_Gear_10_temp2011.indd 54

Install Mixers

[Gear] 04.03.11 21:56

Live Mixers Gea earr

GIG-6 D2260

NEW PRODUCT

6 Channel Live Mixer

Special features: • USB PC/MAC audio interface • Aux / FX sends on each channel • Ultra low noise mic preamps • 16 Reverb echo DSP presets

The DAP GIG-6 is an 6 channel compact versatile mixer with 16 build-in DSP echo reverb presets. The USB port gives you the possibility to connect a PC or MAC and record your mix or use as external input source. It is an ideal mixer for small venues where ultimate perfomance and advanced features are needed. Technical Information Input channels: 2 x Mic balanced 2 x Line mono 2 x Line stereo 1 x Aux stereo return 1 x CD/Tape stereo input Output channels: 1 x Main Stereo out by 2x 1/4” Jack 1 x Ctrl room stereo out by 2 x 1/4” Jack 1 x Aux send by 1 x 1/4” Jack 1 x Rec stereo output by RCA 1 x Phones stereo by 1 x 1/4” Jack USB Port: Audio in- & output interface for PC & MAC Input inmpedance: Mic inputs, 4,6K Ohm Line inputs, 20K Ohm Stereo inputs, > 10K Ohm Aux stereo return, > 10K Ohm CD/Tape stereo input, 10K Ohm Gain control:

T.H.D.: S/N: Frequency Resp.: Crosstalk:

< 0.005% (Any output, 1Khz @ + 14dBu, 20Hz to 20Khz, channel inputs) > 90 dB 20Hz - 30 Khz (+/-1dB) >80 dB

Output levels:

20 dB

Channel EQ:

Low, 80Hz +/- 15 dB Mid, 2,5KHz +/- 15 dB High, 12KHz +/- 15 dB

Phantom power:

+ 48 V

Power supply: AC 15 V Power consumption: 8 Watt Measurements: 50 x 235 x 242 mm Weight: 1,3 Kg

Mono channels 30 dB Stereo channels 10 dB Aux & FX 10 dB

Live Mixers 01_02_DAP_Gear_10_temp2011.indd 55

[Gear]

55 04.03.11 21:56

Live Mixers Gea earr

Special cial features: • USB PC/MAC audio interface • Aux / FX sends on each channel • Ultraa low noise mic preamps • 16 Reverb everb echo DSP presets

GIG-8 D2261

NEW PRODUCT

8 Channel Live Mixer

The DAP GIG-8 is an 8 channel compact versatile mixer with 16 build-in DSP echo reverb presets. The USB port gives you the possibility to connect a PC or MAC and record your mix or use as external input source. It is an ideal mixer for small venues where ultimate perfomance and advanced features are needed. Technical Information Input channels: 4 x Mic balanced 4 x Line mono 2 x Line stereo 1 x Aux stereo return 1 x CD/Tape stereo input Output channels:

USB Port: Input inmpedance:

Ohm Gain control:

56 01_02_DAP_Gear_10_temp2011.indd 56

Live Mixers

1 x Main Stereo out by 2x 1/4” Jack 1 x Ctrl room stereo out by 2 x 1/4” Jack 1 x Aux stereo send by 1 x 1/4” Jack 1 x Rec stereo output by RCA 1 x Phones stereo by 1 x 1/4” Jack Audio in- & output interface for PC & MAC Mic inputs, 4,6K Ohm Line inputs, 20K Ohm Stereo inputs, > 10K Ohm Aux stereo return, > 10K Ohm CD/Tape stereo input, 10K

T.H.D.: S/N: Frequency Resp.: Crosstalk: Output levels:

< 0.005% (Any output, 1Khz @ + 14dBu, 20Hz to 20Khz, channel inputs) > 90 dB 20Hz - 30 Khz (+/-1dB) > 80dB 20 dB

Channel EQ:

Low, 80Hz +/- 15 dB Mid, 2,5KHz +/- 15 dB High, 12KHz +/- 15 dB

Phantom power:

+ 48 V

Power supply: Power consumption: Measurements: Weight:

AC 15 V 8 Watt 50 x 290 x 242 mm 1,6 Kg

Mono channels 30 dB Stereo channels 10 dB Aux & FX 10 dB

[Gear] 04.03.11 21:56

Live Mixers Gea earr

Special features: • USB PC/MAC audio interface • 16 Adjustable effects • Pre/post Aux- & FX sends for each channel • Separate sub outputs

GIG-12 D2262

NEW PRODUCT

12 Channel Live Mixer

The DAP GIG-12 is a 12 channel mixer with 16 controllable DSP effects. It is a very complete 2 bus mixer with all functionality you need to make a perfect audio mix. The USB port gives you the possibility to connect a PC or MAC and record your mix or use as external input source. It has inserts and low cut on the mono channels and selectable pre post aux send. The stereo output is equipped with a contour function that will give your main mix extra body and a nice high presence. Main Features: • USB connectivity • Inserts on mono channels • Stereo & Sub routing switches • PFL switches • 80Hz low cut switches on all channels • 16 controllable DSP effects • Channel signal & clipping leds • 3-band channel EQ • Pre/Post Aux & FX sends on each channel • 48 V Phantom power Technical Information Input channel: 6 x Mic balanced 4 x Line mono 4 x Line stereo 2 x Aux stereo return 1 x CD/Tape stereo input Output channels: 1 x Main Stereo out by 2x XLR and 2 x 1/4” jack 2 x Sub mono out by 2 x 1/4” jack 1 x Ctrl room stereo out by 2 x 1/4” Jack 2 x Aux send by 1 x 1/4” Jack 1 x Rec stereo output by RCA 1 x Phones stereo by 1 x 1/4” Jack USB Port: Audio in- & output interface for PC & MAC Input inmpedance: Mic inputs, 2,8K Ohm Line inputs, 20K Ohm Stereo inputs, 10K Ohm Aux stereo return, 10K Ohm CD/Tape stereo input, 10K Ohm

Gain control:

Mono channels 50 dB Stereo channels 40 dB Aux & FX 10 dB

T.H.D:

< 0.005% (Any output, 1Khz @ + 14dBu, 20Hz to 20Khz, channel inputs) S/N: > 90 dB Frequency Resp.: 20Hz - 30 Khz (+/-1dB) Crosstalk: >80 dB Output levels: >22 dB Channel EQ: Low Cut:

Low, 100Hz +/- 15 dB Mid, 2,5KHz +/- 15 dB High, 10KHz +/- 15 dB 80 Hz 18dB

Phantom power:

+ 48 V

Power supply: AC 100- 240V 50Hz/60Hz Power consumption: 25 Watt Measurements: 86 x 315 x 383 mm Weight: 3,9 Kg

Live Mixers 01_02_DAP_Gear_10_temp2011.indd 57

[Gear]

57 04.03.11 21:56

Live Mixers Gea earr

NEW PRODUCT

Speciall features: • USB PC/MAC /MAC audio interface • 16 Adjustable stable effects • Pre/postt Aux- & FX sends for each channel • Separate rate bus outputs

GIG-16 D2263

16 Channel Live Mixer

The DAP GIG-16 is a 16 channel mixer with 16 controllable DSP effects. It is a very complete 4 bus mixer with all functionality you need to make a perfect audio mix. The USB port gives you the possibility to connect a PC or MAC and record your mix or use as external input source. It has inserts on the mono channels, a low cut on all channels and selectable pre post aux sends. The stereo output is equipped with a contour function that will give your main mix extra body and high presence. Main Features: • USB connectivity • Inserts on all mono channels • Stereo & Sub routing switches • PFL switches • 80Hz low cut switches on all channels • 16 controllable DSP effects • Channel signal & clipping leds • 3-band channel EQ • Pre/Post Aux & FX sends on each channel • 48 V Phantom power Technical Information Input channel: 10 x Mic balanced 8 x Line mono 4 x Line stereo 2 x Aux stereo return 1 x CD/Tape stereo input Output channels: 1 x Main Stereo out by 2x XLR and 2 x 1/4” jack 2 x Sub mono out by 2 x 1/4” jack 1 x Ctrl room stereo out by 2 x 1/4” Jack 2 x Aux stereo send by 1 x 1/4” Jack unbalanced 1 x Rec stereo output by RCA unbalanced 1 x Phones stereo by 1 x 1/4” Jack unbalanced USB Port: Audio in- & output interface for PC & MAC

T.H.D.: S/N: Frequency Resp.: Crosstalk: Output levels: Channel EQ:

< 0.005% (Any output, 1Khz @ + 14dBu, 20Hz to 20Khz, channel inputs) > 90 dB 20Hz - 30 Khz (+/-1dB) >80 dB >22 dB

Low Cut:

Low, 100Hz +/- 15 dB Mid, 2,5KHz +/- 15 dB High, 10KHz +/- 15 dB 80 Hz 18dB

Phantom power:

+ 48 V

Power supply: AC 100- 240V 50Hz/60Hz Power consumption: 25 Watt Measurements: 86 x 418 x 383 mm Weight: 4,4 Kg

Input impedance: Mic inputs, 2,8K Ohm Line inputs, 20K Ohm Stereo inputs, 10K Ohm Aux stereo return, 10K Ohm CD/Tape stereo input, 10K Ohm Gain control:

58 01_02_DAP_Gear_10_temp2011.indd 58

Live Mixers

Mono channels 50 dB Stereo channels 40 dB Aux & FX 10 dB

[Gear] 04.03.11 21:56

Live Mixers Gea earr

NEW PRODUCT

Special features: •USB PC/MAC audio interface •Tape input can be routed to AUX 1 or AUX 2 •Mono output with variable low pass filter •Tape in- output with RCA and mini jack

GIG-24 D2264

24 Channel Live Mixer

The DAP GIG-24 is a 24 channel mixer with all features you need to connect a complete band and all necessary signal processing gear. It has very low noise, high quality mic preamps. The USB port gives you the possibility to connect a PC or MAC and record your mix or use as external input source. It has inserts & low cut switches on the mono channels and four aux sends on all channels. All mono channels have three-band EQ´s with a selectable mid frequency, the stereo channels have 4-band EQ´s. Main Features: • USB connectivity • low noise high quality mic preamps • Mono channels with inserts and phantom power • Stereo channels with 4-band EQ • Mono channels with 3-band EQ with mid sweep • 18dB/Oct 75 Hz low cut on mono channels • 48 V Phantom power

Technical Information Input channels:

20 x Mic balanced 16 x Line mono 4 x Line stereo 2 x Aux stereo return 1 x CD/Tape stereo input by RCA and mini jack 20 x insertion by 1/4” jack

Stereo return 10K Ohm TAPE input, 10 KOhm Gain Control:

Mono channels 50 dB Stereo channels 40 dB Aux & FX 10 dB

T.H.D.: S/N: Crosstalk: Frequency Responce:

< 0.005% (Any output, 1Khz @ + 14dBu, 20Hz to 20Khz, channel inputs) > 90 dB > 80dB 20Hz - 30 Khz (+ /-1dB)

USB Port:

1 x Main Stereo out by 2x XLR and 2 x 1/4” jack 1 x mono out by XLR and 1/4” jack 1 x Ctrl room stereo out by 2 x 1/4” Jack 4 x Aux send by 2 x XLR and 2 x 1/4” Jack 1 x Rec stereo output by RCA & mini jack 1 x Phones stereo by 1 x 1/4” Jack Audio in- & output interface for PC & MAC

Channel EQ:

LED indications: Channel faders: Channel controls: Metering: Low pass filter on mono output:

Mute / Peak / Signal / PFL 60 mm PFL, Mute, Pan, Aux 1-4, EQ, Gain, Low Cut, PAD 2 bars with 11 segments 60-160H, 12dB/Oct

Low Cut: Phantom power: Lamp connector:

Low: 80Hz +/- 15 dB Mid sweep: 100Hz -8Khz +/- 15 dB High: 12KHz +/- 15 dB 75Hz 18dB/oct + 48 V XLR chasis 12V DC

Impedance:

Mic inputs, 2.8K Ohm Line inputs, 20K Ohm

Power supply: Power consumption: Measurements: Weight:

AC 100- 240V 50Hz/60Hz 25 Watt 78 x 418 x 383 mm 4,4 Kga

Output channels:

Live Mixers 01_02_DAP_Gear_10_temp2011.indd 59

[Gear]

59 04.03.11 21:56

CD Players Gea earr

DS-200K D1131

Professional Karaoke DVD Player

The DS-200K is the latest and most sophisticated Karaoke DVD player in the DAP range. It combines a full functional DVD player with Karaoke functionality with a clear and bright 7”LCD display which makes it very easy to select the right track or to monitor the status of the picture. The DS-200K has two built in microphone inputs, built in reverb and tone control. For full functionality it is also equipped with both SD-card and USB slot to play your MP3 files. The DS-200K is a versatile DVD player, suitable for the most demanding applications.

60 01_02_DAP_Gear_10_temp2011.indd 60

Technical Information • Compatible with CD, CD-R, CD-RW, MP-3, DVD, • 100-240V Multivoltage powersupply • Professional USB and SD Card player with key control • 7” TFT display • LCD display with blue backlight • 2 microphone inputs • Headphone output • Karaoke function • Digital Output • Composite Output • S/N Ratio: 65dB • Frequency response: 20Hz-20kHz • Dimensions (LxWxH): 482 x 135 x 132 (19” 3U) • Wireless remote included

CD Players

[Gear] 04.03.11 21:56

CD Players Gea earr

DS-185K D1127

1 U Karaoke DVD player

• LCD display with blue backlight • Full control remote control unit • Variable delay effect unit • 2 Adjustable mic inputs The DS-185K supports the following formats: dvd-video, cd, hdcd, dtscd vcd, s-vcd, mpeg4, picture cd, cd-r/rw, MP3, wma,AC3

Technical Information Power supply: Power consumption: Video signal: S/N ratio: Audio output: Video output: Video/picture: Audio: Frequency response: Mic input: Audio output: Remote batteries: Dimensions: Weight:

AC 115/240 - 50/60 Hz 25 Watt NTSC/PAL >92dB 2.0 V p-p 1.0 V p-p MPEG1, MPEG2 MPEG1, MPEG2, Dolby Digital, DTS, Analog 20Hz - 20 kHz XLR balanced, Jack unbalanced stereo RCA unbalanced AAA 2x 1,5V 482 x 56 x 260 mm (LxWxH) 4 kg

CD Players 01_02_DAP_Gear_10_temp2011.indd 61

[Gear]

61 04.03.11 21:57

CD Players Gea earr

12cm 12c m or or 8cm 8cm dis discs cs

DS-610 D1128

1U CD/USB/MP3 Player

• Large LCD display for all information • Anti-shock memory Technical Information Power supply: Power consumption: Disc type: Pitch control: S/N-ratio: Frequency response: Headphones: Audio Line output: Audio Rec output: Dimension: Weight: Batteries of remote:

AC 108-260V - 50/60 Hz 5Watt Standard compact discs (12 cm or 8 cm ) +/- 24% >96 dB 20 - 20 kHz 6,3 mm jack Stereo RCA, Unbalanced Stereo RCA, Unbalanced 482 x 45 x 260 mm (LxWxH) 2,75 kg AAA, 2x 1,5V

62 01_02_DAP_Gear_10_temp2011.indd 62

CD Players

[Gear] 04.03.11 21:57

CD Players Gea earr

DS-860S

DS-860D

• Professional 19 inch 2U CD player • Anti-shock memory • Remote control • Program mode (20 tracks) • Continuous and Single play mode • Large Jog wheel • Auto cue • Seamless loop

• Professional Twin CD Player • Anti-shock memory • Program mode (20 tracks) • Continuous and Single play mode • Large jog wheel • Auto cue • Seamless loop

D1170

Single CD Player

Technical Information Power Supply: AC 110/230 Volt – 50/60 Hz Power consumption: 20 W Frequency response: 20 Hz – 20 kHz Signal/noise ratio: 96 dB Pitch control: +/- 12% Time display: Remain, total remain, elapsed Sampling frequency: 44,1 kHz DA converter: 24 Bit Harmonic distortion: 0,003% Dimensions: 19” x 270 mm x 2U (LxWxH) Weight: 2,6 kg

D1180

Technical Information Power Supply: Power consumption: Frequency response: Signal/noise ratio: Pitch control: Time display: Sampling frequency: DA converter: Harmonic distortion: Dimensions main unit: Dimensions control unit: Weight:

CD Players 01_02_DAP_Gear_10_temp2011.indd 63

Double CD Player

[Gear]

AC 110/230 Volt – 50/60 Hz 25W 20 Hz – 20 kHz 96 dB +/- 12% Remain, total remain, elapsed 44,1 kHz 24 Bit 0,003% 19” x 270 mm x 2U (LxWxH) 19” x 70 mm x 2U (LxWxH) 3,0 kg

63 04.03.11 21:57

CD Players Gea earr

• Improved Software! • Accurate Pitch (0,1%)! • Scratch function! • USB/SD (8 GB)

DS-880DMP3

DS-2680DMP3

• Professional Twin CD Player • Anti-shock memory • Program mode (20 tracks) • Compatible with: CD, CD-RW, MP3, CD-R • Continuous and Single play mode • Large jog wheel • Auto cue • Seamless loop

• Professional Twin CD Player • Anti-shock memory • Compatible with: CD, CD-RW, MP3, CD-R • Slot in disc loading system • Program mode (20 tracks) • Continuous and Single play mode • Large jog wheel • Direct access buttons for track numbers • Auto cue • Seamless loop • USB + SD input

D1181

Double CD Player with MP3

AC 110/230 Volt – 50/60 Hz 25W 20 Hz – 20 kHz 96 dB +/- 12% Remain, total remain, elapsed 44,1 kHz 24 Bit 0,003% 19” x 270 x 2U mm (LxWxH) 19” x 70 x 2U mm (LxWxH) 3,0 kg

64 01_02_DAP_Gear_10_temp2011.indd 64

D1184

Double CD Player with direct access, MP3 and slot in

CD Players

AC 110/230 Volt – 50/60 Hz 25W 20 Hz – 20 kHz 85 dB +/- 12% Remain, total remain, elapsed 44,1 kHz 24 Bit 0,003% 19” x 260 mm x 2U (LxWxH) 19” x 65 mm x 3U (LxWxH) 5,9 kg

[Gear] 04.03.11 21:57

CD Players Gea earr

• Improved Software! • Accurate Pitch (0,1%)! • Scratch function! • USB/SD (8 GB) • Optional flightcase: D7590B

DS-CDJ-250 MKII D1226

DS-380TL MP3 D1190

Frontloading Table Top with MP3

Professional Table top CD Player with Anti-shock memory. Compatible with CD, CD-RW, MP3, CD-R. This unit is equipped with USB input and Slot in disc loading system. Furthermore, there is a Program mode (20 tracks), Continuous and Single play mode, a large jog wheel with display, direct access buttons for track numbers, Auto cue, Seamless loop, Folder search and track search. Technical Information Power Supply: Power consumption: Frequency response: Signal/noise ratio: Pitch control: Time display: Sampling frequency: DA converter: Harmonic distortion: Dimensions: Weight:

AC 110/230 Volt – 50/60 Hz 25 W 20 Hz – 20 kHz 88 dB +/- 12% Remain, total remain, elapsed 44,1 kHz 1 Bit 0,01% 280 x 320 x 100 mm (LxWxH) 3,4 kg

• Twin CD player with anti shock • Large Jog wheel with display • Direct access buttons for fast control • Program mode (20 tracks) • Continuous and Single play mode • Seamless loop • 3 Channel mixer with 5 extra inputs • Mixer with low, mid, high tone control • 60 mm Crossfader • USB input • SD-card Reader (max 4 GB) • Folder search, track search Technical Information Power Supply: Power consumption: Frequency response: Signal/noise ratio: Pitch control: Time display: Sampling frequency: DA converter: Harmonic distortion: Signal inputs: Input connector: Signal outputs: Output connector: Dimensions: Weight:

CD Players 01_02_DAP_Gear_10_temp2011.indd 65

DJ workstation

[Gear]

AC 110/230 Volt – 50/60 Hz 80W 20 Hz – 20 kHz 85 dB +/- 12% Remain, total remain, elapsed 44,1 kHz 24 Bit 0,003% 2 x phono, 2 x line, 1 x mic Cinch, XLR 1 master, 1 record, 1 headphone Master: XLR male balanced, Cinch Record: Cinch Headphone: Stereo jack 483 x 260 x 133 mm (LxWxH) 11 kg

65 04.03.11 21:57

CD Players Gea earr

DS-MP-150 D1230

MP3 Midi Player Desk (incl Virtual DJ LE)

The DS-MP-150 is a true midi controller to control your PC like a common audio device. Just connect the DS-MP-150 with USB to your computer or laptop and you will be able to fully control your music-files. Delivery is complete with the award winning Virtual DJ software which is user friendly and quick to learn. Mixing has never been easier as with the DS-MP-150.

Technical Information • Touch Jog Wheel • USB interface • 3 selectable Jog Modes (Pitch, Search, Scratch) • Adjustable cross-fader • Plug & Play functionality • Including Virtual DJ LE software • Dimensions (LxWxH): 360 x 260 x 50 mm

66 01_02_DAP_Gear_10_temp2011.indd 66

CD Players

[Gear] 04.03.11 21:57

CD Players Gea earr

DS-MP-170 D1232

MP3 Midi Player Desk (incl.Virtual DJ LE)

The DS-MP-170 is the extended version of the DS-MP-150. It has the same functionality as DS-MP-150 but is equipped with an USB audio interface that enables you to connect the controller directly to an audio system or active speaker. It also has extra functions such as headphone output and an external line-input to connect an conventional audio source such as a CD player.

Technical information: • • • • • • • • • •

Touch Jog Wheel USB audio interface 3 selectable Jog Modes (Pitch, Search, Scratch) Adjustable cross-fader Plug & Play functionality Including Virtual DJ LE software Line Input Headphone output. Balanced master output. Dimensions (LxWxH): 360 x 260 x 50 mm

CD Players 01_02_DAP_Gear_10_temp2011.indd 67

[Gear]

67 04.03.11 21:57

CD Players Gea earr

DS-UMP1 D1129

Technical Information Power supply: Power consumption: Pitch control: S/N ratio: Frequency response: Headphone connector: Micro connector:

Universal Media ia player

• Player for SD, MMC and USB mp3 • Max capacity: 4 GB • Large LCD display

DS-200MP3 D1231

MP3 Player Rackmount

The Darkshade DS-200MP3 is a fully digital media player. It can read both SD-card and USBstick and can play any MP3 song you want. The DS-200MP3 has both foldersearch and tracksearch. The big bright LCD display makes selecting songs very easy and fast. Seamless Loop, Pitch control and the big jog shuttle make the DS-200MP3 a versatile and easy to use MP player suitable for the modern and demanding DJ. • Improved Software! • Accurate Pitch (0,1%)! • Scratch function! • USB/SD (8 GB)

68 01_02_DAP_Gear_10_temp2011.indd 68

AC 80-260V - 50/60 Hz 5 watt 24% +/>96 dB 20 Hz - 20 kHz 6,3 mm jack XLR 3 pole balanced

Audio output: Stereo XLR balanced, Stereo RCA unbalanced Dimensions: 482 x 45 x 260 mm (LxWxH) Weight: 2,4 kg Remote control batteries: AAA 2x 1,5V

Technical Information Professional Twin MP Player Continuous and Single Play Mode Folder Search Track Search Large Jog Wheel Auto Cue Seamless Loop Power Supply: Power Consumption: Frequency response: Signal noise ratio: Pitch control: USB and SD card reader Dimensions: Weight:

CD Players

AC 80-240V 20W 20Hz - 20kHz 85dB +/- 12% 19” 3U / 482 x 80 x 135 mm 2,5 kg

[Gear] 04.03.11 21:57

CD Players Gea earr

CD-110 D1250

• • • • •

1U Professional CD/MP3 Player

CD player Slot in CD running gear Anti shock memory Program mode, Random mode USB input

Technical Information Power Supply: AC 230V – 50-60 Hz Power consumption: 50 Watt CD unit: Slot in, with Anti shock memory CD type: CD/CDR/CDR-W/MP-3 Output: RCA , stereo Output level: 1,2 V +/- 2 dB

Technical Information Power Supply: AC 230V – 50/60 Hz Power consumption: 50 Watt CD unit: Anti shock memory CD type: CD/CDR/MP-3 Output: RCA,stereo Output level: 1,2 V +/- 2 dB Separation: 60dB at 1 kHz THD: < 0,1% at 1 kHz S/N Ratio: > 70dB at 1 kHz

Separation: THD: S/N Ratio: Dimensions: Weight:

60dB at 1 kHz < 0,1% at 1 kHz > 70dB at 1 kHz 482 x 44 x 250 mm (LxWxH) 3,4 kg

Tuner unit:

AM (522 -1620 kHz) /FM tuner (87,5 – 108 MHz) 75 Ohm Antenna terminal socket RCA,stereo 482 x 44 x 250 mm (LxWxH) 3,6 kg

Antenna: Output: Dimensions: Weight:

TCD-100 D1251

• • • • • • • •

CD Players 01_02_DAP_Gear_10_temp2011.indd 69

1U CD/MP3 Player + Tuner

CD player Slot in CD running gear Anti shock memory Program mode, Random mode USB input AM/FM Tuner 20 preset memory’s Auto scanning, Manual scanning

[Gear]

69 04.03.11 21:57

CD Players Gea earr

DMP-100 D1252

Technical Information Power supply: AC 230V - 50 Hz Power consumption: 50 Watt Input: USB memory stick, SD/MMC card slot RCA stereo audio signal Output: USB memory stick, SD/MMC card slot RCA stereo audio signal

1U MP3 Recorder

Digital audio system SD, MMC card, USB MP3 compatible.

Technical Information Power supply: Power consumption: Input: THD: S/N Ratio: Separation: Output level: Mac record input: Dimensions: Weight: Accessories:

AC 230V - 50 Hz 50 Watt USB memory stick, SD/MMC card slot, CD, RCA stereo audio signal 1kHz, <0,3% > 60 dB > 60 dB 1kHz / o dB = 1,2V +/- 2 dB 800mV 482 x 250 x 44 mm 3,1 kg Remote control

THD: 1kHz, < 0,3% S/N Ratio: > 60dB Separation: > 60dB Output level: 1 kHz/ 0 dB = 1,2V +/-2dB Max. record input signal: 800mA Dimensions: 482 x 250 x 44 mm (LxWxH) Weight: 3,1 kg

CDR-110 D1253

CD/USB Recorder

The DAP CDR-110 combines a CD player with a USB/SD MP-3 player/recorder in only 1U. A must have for each effect-rack, but also very suitable to be built into fixed installations. Please note that due to the USB/SD card functionality the record button always has a 3 sec delay as it needs to search the right source. For easy operation the CDR-110 comes including IR remote control. A clear and bright display shows you the status of the unit and track.

Memory cards & sticks USB Stick

SD-Card D1280 D1281 D1282

2GB 4GB 8GB

70 01_02_DAP_Gear_10_temp2011.indd 70

D1290 D1291 D1292

CD Players

2GB 4GB 8GB

[Gear] 04.03.11 21:57

Audioprocessing Gea earr

ACU-2 D1931

Professional Audio Connector

The DAP ACU-2 is a professional connection unit with 2 x XLR line-in, 2x XLR line-out and Speakon speaker-connectors for Low, Mid/High and bi-amping operation. At the backside of the ACU youâ&#x20AC;&#x2122;ll also find a 230V power outlet for the connection of a powersplitter. Technical information: Length speaker cable: Length power cable: Length signal cable: Dimensions:

1.5m 1.5m 0.6m 19 inch x 1U 483 x 70 x 45 mm (LxWxH) Weight: 1,5 kg Power connector not included

DB Display D1902

Technical information:

Decibel Power Display

DAP stage cubes make a complete series of audio tools for use by professionals. They provide functions like amplifying, mixing, monitoring, adjusting, interconnecting and patching. Build in a firm metal housing they are stage-proof while, due to their small footprint they can also be used in any environment where space is critical.

Dimensions: Weight:

Audioprocessing 01_02_DAP_Gear_10_temp2011.indd 71

483 x 45 mm (LxH) 0,94 kg

[Gear]

71 04.03.11 21:57

Audioprocessing Gea earr

EQ-3231F D1923

Technical information:

Graphical Eq. 2 x 31 band/3U with feedback frequency

With feedback frequency display!

Power: S / N Rate: Freq. response: THD %: Central freq. filter: Precision of the central frequency: Filter of input: The max. increase/Reduce of the freq.: Dynamic range: Input gain: Indicator:

Input impedance: Output impedance: Input connector: Output connector: Dimensions: Weight:

EQ-3231 D1922

Graphical Eq. 2 x 31 band/3U

Technical information: Power: S / N Rate: Freq. response: THD %: Central freq. filter: Precision of the central frequency: Filter of input: The max. increase/reduce of the freq.: Dynamic range: Input gain: Indicator: Input impedance: Output impedance: Input connector: Output connector: Dimensions: Weight:

72 01_02_DAP_Gear_10_temp2011.indd 72

AC2 x 18V 500 mA > 95 dB 20 Hz - 20 kHz (+/- 0.3 dB) <0,01% 2 step filter < +/- 1.5%) Variable filter +/- 15 dB 118 dB - ~+6 dB Power, Output VU, Low Cut Filter, Clip Output, By Pass, Feedback Balanced 20 kilo-Ohm / Unbalanced 10 kilo-Ohm Balanced 200 Ohm / Unbalanced 100 Ohm XLR (1=G, 2=+, 3=-), TRS (Tip +) XLR (1=G, 2=+, 3=-), TRS (Tip +) 483 x 173 x 133 mm (LxWxH) 3 kgaa

Audioprocessing

AC2 x 18V 500 mA > 95 dB 20 Hz - 20 kHz (+/- 0.3 dB) <0.01% 2 step filter < +/- 1.5%) Variable filter +/- 15 dB 118 dB - ~+6 dB Power, Output VU, Low Cut Filter, Clip Output, By Pass Balanced 20 kilo-Ohm / Unbalanced 10 kilo-Ohm Balanced 200 Ohm / Unbalanced 100 Ohm XLR (1=G, 2=+, 3=-), TRS (Tip +) XLR (1=G, 2=+, 3=-), TRS (Tip +) 483 x 173 x 133 mm (LxWxH) 4,7 kg

[Gear] 04.03.11 21:57

Audioprocessing Gea earr

Technical information: Model: Power: S / N Rate: Freq. response: THD %: Central freq. filter: Precision of the central frequency: Filter of input: The max. increase/ reduce of the freq.: Dynamic range: Input gain: Indicator: Input impedance: Output impedance: Input connector: Output connector: Dimensions: Weight:

DAP Audio EQ-2215 AC2 x 18V 500 mA > 95 dB 20 Hz - 20 kHz (+/- 0.3 dB) <0.01% 2 step filter < +/- 1.5%) 45 Hz Low Cut +/- 15d B 118 dB - ~+6 dB Power, Output VU, Clip Output, Low Cut, By Pass Balanced 20 kilo-Ohm / Unbalanced 10 kilo-Ohm Balanced 300 Ohm / Unbalanced 150 Ohm XLR (1=G, 2=+, 3=-), TRS (Tip +) XLR (1=G, 2=+, 3=-), TRS (Tip +) 483 x 173 x 89 mm (LxWxH) 4 kgaa

Technical information: Power: S / N Rate: Freq. response: THD %: Central freq. filter: Precision of the Central frequency: Filter of input: The max. increase/ Reduce of the freq.: Dynamic range: Input gain: Indicator: Input impedance: Output impedance: Input connector: Output connector: Dimensions: Weight:

AC2 x 18V 500 mA > 95 dB 20 Hz - 20 kHz (+/- 0.3 dB) <0.01% 2 step filter < +/- 1.5%) variable filter +/- 15 dB 118 dB - ~+6 dB Power, Output VU, Clip Output, Low Cut Filter, By Pass Balanced 20 kilo-Ohm / Unbalanced 10 kilo-Ohm Balanced 300 Ohm / Unbalanced 150 Ohm XLR (1=G, 2=+, 3=-), TRS (Tip +) XLR (1=G, 2=+, 3=-), TRS (Tip +) 483 x 173 x 89 mm (LxWxH) 3 kgaa

EQ-2215 D1920

Graphical Eq. 2 x 15 band/2U

For the more demanding audio-professional we offer the DAP-Graphical Equalizers. A range of 4 graphical equalizers with a wide range of use: live-artists, DJâ&#x20AC;&#x2122;s and fixed installations.

EQ-2231 D1921

Graphical Eq. 2 x 31 band/2U

Audioprocessing 01_02_DAP_Gear_10_temp2011.indd 73

[Gear]

73 04.03.11 21:57

Audioprocessing Gea earr Special features: • DAP speaker presets available at www. dap-audio.info • 48 Khz, 32Bits Sample rate • 5 parametric filters per input and output • USB interface with included user-friendly software • Engineered and assembled in Europe

DSM-26 D2070

NEW PRODUCT

Digital Speaker Manager Pro

The DSM-26 is a 2 in- and 6 output speaker manager that can be used for a wide range of applications. It has all dynamics you need to tune many different types of speaker set-ups. At the front it has an USB connection port which enables you to program the DSM-26 with the included software. The RS485 interface gives you the possibility to connect and program multiple units at once. It has a powerful chipset that makes it possible to use all filter slopes until 48 dB per octave and all equalizer, delay sections without running out of memory or calculations. The DSM-26 is suitable for professional PA systems, line arrays and audio installations, as well as sound distribution networks. Check out all features and specifications online at www.dap-audio.info. Technical information: DSP: Sample rate:

48 kHz, 64 bits NXP (Philips) DSP

5-Bands Input EQ: EQ Selections: EQ Frequency Selection:

Allpass, Bell, High Shelf, Low Shelf, Notch 20 to 20,000 Hz in 1 Hz steps on all EQ’s

Delay: Output delay:

Channel independent from 0 to 8 mS

5-Bands Output EQ: EQ Selections: Type:

same as input Low Shelf 6, Low Shelf 12, High Shelf 6 and High Shelf 12

Crossovers: Types: Slopes: Crossover frequencies:

Linkwitz Riley, Bessel and Butterworth 6, 12, 18, 24 dB/octave 20 to 20,000 in 1 Hz octave steps

Limiter: Threshold points: Attack time: Release times:

-20 to +20 dBu in 0.5 dB steps Zero Attack Time Limiter 1 = shortest, 100 = endless long, in steps of 1.

Miscellaneous: Memory Storage: 50 User presets Mute: All Output channels can be individually muted Display: 2 x 16 dot matrix characters Latency: 1.27 mS USB Interface: Back Power Supply: 6V DC Power Consumption: 4 Watt Power Switch: Back Accessories: Power adapter, USB cable, DSP software Full specification and features at productsheet on www.dap-audio.info

74 01_02_DAP_Gear_10_temp2011.indd 74

Audioprocessing

[Gear] 04.03.11 21:57

NEW PRODUCT

DCP-26 D2081

Digital Cross Over 2-in, 6-out

The DCP-26 is a very complete 2 in- 6 output digital speaker manager. Even if you are not an audio engineer you can easily setup this unit with the included software that works by the USB interface. It has 5 PEQ’s at the in- and outputs and various types of filters to manage any kind of speaker or speaker system. Furthermore it has all features you need like phase reverse, limiters and delays. Clear in and output meters in combination with the LCD display gives you all the necessary information in one overview. Our engineers will keep working on presets for the DAP speaker ranges to help you getting a good start of settings for your personal DAP audio system. Those presets can be downloaded at www.dap-audio.info or ask your local dealer. The DCP-26 is suitable for PA, line arrays and audio installations, as well as sound distribution networks. Technical Information DSP: Sample rate: 48 kHz, 64 bits NXP (Philips) DSP 5-Bands Input EQ: EQ Selections: Allpass, Bell, High Shelf, Low Shelf, Notch EQ Frequency Selection: 20 to 20,000 Hz in 1 Hz steps on all EQ’s Delay: Output delay: mS

Channel independent from 0 to 8

5-Bands Output EQ: EQ Selections: same as input Type: Low Shelf 6, Low Shelf 12, High Shelf 6 and High Shelf 12 Crossovers: Types:

Linkwitz Riley, Bessel and Butterworth Slopes: 6, 12, 18, 24 dB/octave Crossover frequencies: 20 to 20,000 in 1 Hz octave steps

Limiter: Threshold points: -20 to +20 dBu in 0.5 dB steps Attack time: Zero Attack Time Limiter Release times: 1 = shortest, 100 = endless long, in steps of 1. Miscellaneous: Memory Storage: 50 User presets Mute: All Output channels can be individually muted Display: 2 x 16 dot matrix characters Latency: 1.27 mS USB Interface: Back Power Supply: 6V DC Power Consumption: 4 Watt Power Switch: Back Accessories: Power adapter, USB cable, DSP software Full specification and features at productsheet on www.dap-audio.info

Special features: • DAP speaker presets available at www. dap-audio.info • 48 Khz, 32Bits Sample rate • 5 parametric filters per input and output • USB interface with included user-friendly software • Engineered and assembled in Europe Technical Information DSP: Sample rate: 48 kHz, 64 bits NXP (Philips) DSP 5-Bands Input EQ: EQ Selections: Allpass, Bell, High Shelf, Low Shelf, Notch EQ Frequency Selection: 20 to 20,000 Hz in 1 Hz steps on all EQ’s Delay: Output delay: Channel independent from 0 to 8 mS 5-Bands Output EQ: EQ Selections: same as input Type: Low Shelf 6, Low Shelf 12, High Shelf 6 and High Shelf 12 Crossovers: Types: Linkwitz Riley, Bessel and Butterworth Slopes: 6, 12, 18, 24 dB/octave Crossover frequencies: 20 to 20,000 in 1 Hz octave steps

DCP-24 D2080

Digital Cross Over 2-in, 4-out

The DCP-24 is the little brother of the DCP-26 which has exact the same features but has four outputs instead of six. If you have a stereo sub top combination and want to get the maximum power out of your audio system without the risk of any damage this is the unit that gets the job done. Fully digital with all features you need to tune and protect your sound system. If you are not familiar with speaker processors our DAP engineers will help you with standard presets for our dap speaker ranges. Ask your dealer or download them at www.dap-audio.info load them in your DCP-24 memory by USB and you are good to go.

Full specification and features at productsheet on www.dap-audio.info

Audioprocessing 01_02_DAP_Gear_10_temp2011.indd 75

[Gear]

75 04.03.11 21:58

Audioprocessing Gea earr Special features: • Presets are available at www.dap-audio. info • 48 Khz, 64Bits Sample rate • USB interface with included user-friendly software • Engineered and assembled in Europe • User adjustable EQ and HI / Low pass filters

DCL-22 D2082

Digital Compressor / Limiter

NEW PRODUCT

The DCL-22 is a digital two way compressor limiter with lots of extra features and can be used for a wide range of applications. The main function is the compressor, however most people are not common with compression it actually is very easy to use. Although it decreases the dynamics of your signal it gives the impression of a more powerful sound. If you have compressed your signal, you are able to boost the gain and get more power out of a voice or for example a sound system. The DCL-22 can compress EQ filter and limit your signal, so it also can be used as protection for your sound system.

Technical Information DSP: Sample rate: 48 kHz, 64 bits NXP (Philips) DSP, 5-Bands Input EQ EQ Selections: Allpass, Bell, High Shelf, Low Shelf, Notch EQ Frequency Selection: 20 to 20,000 Hz in 1 Hz steps on all EQ’s 5-Bands Output EQ: EQ Selections: same as input Type: Low Shelf 6, Low Shelf 12, High Shelf 6 and High Shelf 12

Mute:

Outputs channels can be individu ally muted Display: 2x 16 dot matrix characters Latency: 1.27 mS USB Interface: Back Power Supply: 6V DC Power Consumption: 4 Watt Power Switch: Back accessories: Poweradapter, USB cable, Software

Hi and Low-Pass Filters: Types: Linkwitz Riley, Bessel and But terworth Slopes: 6, 12, 18, 24 dB/octave Filter frequencies:20 to 20,000 in 1 Hz octave steps Compressor/Limiter: Threshold points: -20 to +20 dBu in 0.5 dB steps Compression Ratio: 1.1 to Endless Attack time: 1 to 100 mS Hold time: 1 to 1000 mS Release times: 10 to 10,000 mS Miscellaneous: Memory Storage:

NEW PRODUCT

50 User presets

ADI-200 Active direct box D1943 Frequency Response: 10Hz-40KHz Noise Level: < -105db Distortion (THD): < 0.005% at 1khz, 0dbu output Inputs: XLR & 1/4” Jack unbalanced Link out: 1/4” Jack unbalanced Output: XLR balanced Power supply: 9V Battery or 18 - 48V DC (phantom) Input Impedance: >250KΩ Load Impedance: >600 Ω Dimensions: 55 x 135 x 145mm (HxWxD) Weight: 0,65 Kg

ADI-100 Active Direct Inject Box

PDI-100 Passive Direct Inject Box

D1942 Dimensions: Weight:

D1941 Dimensions: Weight:

(LxWxH) 160 x 130 x 65 mm 0,8 kg

76 01_02_DAP_Gear_10_temp2011.indd 76

Audioprocessing

(LxWxH) 160 x 130 x 65 mm 0,7 kg

[Gear] 04.03.11 21:58

Audioprocessing Gea earr SC-1 Personal monitor mix-amplifier

SC-2 4 channel passive mixer

D1501 Max. Input: Output impedance: Gain: Bandwidth: S/N Ratio: Power: Dimensions: Weight:

D1502 Input Impedance: Output Impedance: Gain: Dimensions: Weight:

20 dB Mic, 40 dB Mon. 10 Ohm 20 dB 1/4”, 50 dB XLR 50 Hz - 20 kHz 90 dB 9-18 VAC/DC, 9-24 VDC 113 x 73 x 40 mm (LxWxH) 0,249 kg

47 kOhm 12 kOhm -12 dB 95 x 73 x 40 mm (LxWxH) 0,321 kg

SC-3 3 channel active mini mixer

SC-4 3 channel professional mic/line mixer

D1503 Front Panel: LEVEL 1 - 3:

D1504 Input Impedance: Output Impedance: THD + Noise (distortion): Freq. response:

Volume Controls adjusts the amount of input signal to the indicated channel. Master Level: Master volume control, adjusts the amount of overall signal sent to the Main Right and Left outputs. Headphone level: Adjusts the amount of signal sent to the Headphone Output. PAN 1 - 3: varies the relative amount of right and left signal from the channel to the mix-bus. Phone outs: Two 1/4” TRS Stereo jacks for connection to stereo headphones. Rear Panel: CH 1 - CH 3: inputs 1/4” unbalanced inputs. The right input is the MONO input. Right & Left.

MAIN OUTPUTS: 2 1/4” unbalanced outputs containing the three mixed stereo signals.

Max. Output Level: Max. Input Level: Max. Gain: low-cut: Current-Draw: Phantom Power: Connectors: XLR, 1 1/4” TRS, DC: Dimensions: Weight:

600 Ohm XLR 600 Ohm, 1/4” 0.02% 25 Hz - 16 kHz (=0/-3 dB) + 14 dB - 14 dB + 60 dB 100 Hz 20 mA + 18 VDC 3 XLR (female), 1 (male) Power jack 143 x 93 x 45 mm (LxWxH) 0,553 kg

SC-5 MiniMix Mic/Line mixer

SC-11 Headphone amplifier one channel

D1505 Ch1 Max. Gain: Ch2 Max. Gain: Ch1 Input Impedance: Ch2 Input Impedance: Output Impedance: Power: Dimensions: Weight:

D1511 Input Impedance: Max. Input Level: Input Connectors: Outputs: Max. Gain: S/N Ratio: THD: IMD (SMPTE) Dimensions: Weight:

32 dB 20 dB 10 kOhm 20 kOhm 50 Ohm 12VDC 100 mA (typical) 113 x 73 x 40 mm (LxWxH) 0,45 kg

100 kOhm (unbalanced) +14 dBV Stereo 1/4” TRS phone (4) 1/4” Stereo 1/4” 20 dB/Channel > 90 dB < 0.008% < 0.008% 113 x 73 x 40 mm (LxWxH) 0,336 kg

SC-12 Microphone splitter combiner

SC-13 Two Way stereo converter

D1512 Input impedance: Output impedance: Dimensions: Weight:

D1513 Max. Out: Balanced: Unbalanced: Max. In: Balanced: Unbalanced: Noise Floor: THD: Gain: +4 In:

600 600 Ohm 95 x 73 x 40 mm (LxWxH) 0,305 kg

Dimensions: Weight:

+18 dB +12 dB +22 dB +22 dB -88 dB 0.003% -8 dB -10 In: +20 dB 143 x 93 x 45 mm (LxWxH) 0,527 kg

SC-14 Mini microphone pre-amplifier

SC-15 Phono RIAA equalized pre-amplifier

D1514 Input Impedance:

D1515 Display: 1/O Connectors: Power: Dimensions: Weight:

Max. Input Level: Max. Gain: Phase Shift: EIN: THD: IMD (SMPTE): Power: Dimensions: Weight:

10 kOhm balanced, unbalanced +4 dB V XLR balanced, +10 dB V unbalanced 50 dB XLR, 44 dB 1/4” <10° 20 Hz - 20 kHz 109 dB max. < 0.01% < 0.01% 12 VDC adapter 113 x 73 x 40 mm (LxWxH) 0,349 kg

Audioprocessing 01_02_DAP_Gear_10_temp2011.indd 77

1 Power (LED) RCA 1/4” TRS Stereo 12-18 VDC 95 x 73 x 40 mm (LxWxH) 0,289 kg

[Gear]

77 04.03.11 21:58

Audioprocessing Gea earr SC-16 Signal switching device

SC-17 Sine/Square

D1516 Dimensions: Weight:

D1517 Sine wave out Square wave out Frequency adjustment Sine level adjustment Output pad

95 x 73 x 40 mm (LxWxH) 0,29 kg

SC-18 Stereo Di-box/Hum Eliminator

SC-19 Speaker Checker

D1518 Stereo passive DI-box (2 x IN/2 x OUT) Impedance: 600 Ohm

D1519 Battery operated Output connection for XLR and Speaker connector Volume and Frequency control Frequency Range: 20-20.000 Hz

SC-21 Phantom power supply one channel

SC-22 Phantom powered DI box

D1521 Number of channels: Regulated Output Voltage: Short Circuit Current: Residual Output Noise: Freq. response: AC Input:

D1522 Input Level: Output level:

External Power Supply: Jack: Dimensions:

1 48V 2V DC 14 mA -71 dB V 10 Hz - 25 kHz 120V AC, 60 Hz, 2W MAX. 230V AC, 50 Hz, 2W MAX. UL and CSA approved AC power Module with 1,8 m cable. Male and Female XLR jack 74 x 45 x 130 mm (LxWxH)

Bandwidth: S/N-Ratio: Jack: Controls: Power: Dimensions: Weight:

-10 to + 40 dB unbalanced -10 to + 2 dB balanced (XLR) male (Pin 2+) 1 Hz - 50 kHz 100 dB (2) 1/4â&#x20AC;? Phone, (I) XLR (male) attenuated switch, ground lift switch 9-48 VDC Phantom 95 x 73 x 40 mm (LxWxH) 0,29 kg

SC-23 Passive DI box

StageCube 24 Hum Eliminator XLR

D1523 Frequency range: Inputs:

D1524 Input: Output: Dimensions: Weight:

Outputs: Dimensions: Weight:

15 Hz - 30 kHz +/- 0 dB 50 kilo-Ohm 6,3 mm jacks; unbalanced XLR; balanced 600 Ohm 6.3 mm jacks; unbalanced XLR; balanced 74 x 45 x 130 mm (LxWxH) 0,65 kg

78 01_02_DAP_Gear_10_temp2011.indd 78

Audioprocessing

XLR 3 pole female XLR 3 pole male 115 x 75 x 40 mm (LxWxH) 200g

[Gear] 04.03.11 21:58

Microphones Gea earr

PL-08

PL-08S

PL-08ß

The DAP PL-08 is a cardioid dynamic microphone for professional vocal use. The rugged construction with steel mesh grill is roadproof and therefore, the PL-08 is suitable for live performance, outdoor/indoor singing, speech and studio recording.

The DAP PL-08S is the same mic as the PL08. The only difference is the ON/OFF switch, therefore it’s an ideal choice for conference and DJ-use.

The DAP PL-08ß is a supercardioid dynamic microphone, specially designed for for professional vocal use, speech and studio recording and the supercardioid pattern insures a high gain before disturbing feedback.

Cable included!

D1303

Vocal Dynamic Microphone

Technical information: Type: Freq. response: Polar Pattern: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Vocal/all-round

D1305

Technical information: Dynamic, moving coil. 50 to 16.500 Hz Cardioid 1,8 mV/Pa* (*1 Pa = 94 dB SPL) 137 dB 600 Ohm none 3p. XLR (male-type) 6 m balanced cable with XLR plugs Ø 51 mm x L 160 mm 0,315 kg

Mic. Grill for PL-07ß & PL-06 D1311

D1304

Microphone grill

Type: Freq. response: Polar Pattern: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Dynamic, Moving coil. 50 to 16.500 Hz Cardioid 1,8 mV/Pa* (*1 Pa = 94 dB SPL) 137 dB 600 Ohm none 3p. XLR (male-type) 6 m balanced cable with XLR plugs Ø 51 mm x L 160 mm 0,298 kg

Mic. Grill for PL-08 series D1312

Fits on D1303 & D1304

PL-07ß

D1302 Instrument/Vocal Dynamic Microphone

The dynamic cartridge of the DAP PL-07ß with supercardioid polar pattern insures a high gain before disturbing feedback and is specially designed for lead vocals and instruments as Guitar Amp, Bass Amps, Acoustic Guitars, Saxophones, Snares, Toms, Congas and Woodwinds.

Cable included!

Technical information:

Type: Freq. response: Polar Pattern: Sensitivity (1000 Hz):

Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Dynamic, moving coil. 50 to 16.000 Hz Cardioid 2,9 mV/Pa* (*1 Pa = 94 dB SPL) 137 dB 600 Ohm none 3p. XLR (male-type) 6 m balanced cable with XLR plugs Ø 51 mm x L 160 mm 0,28 kg

Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Dynamic, moving coil. 50 to 16,000 Hz Cardioid 2,6 mV/Pa* (*1 Pa = 94 dB SPL) 137 dB 600 Ohm none 3p. XLR (male-type) 6 m balanced cable with XLR plugs Ø 42 mm x L 160 mm 0,271 kg

DWS-56 D1317

Microphones 01_02_DAP_Gear_10_temp2011.indd 79

Vocal Dynamic Microphone

Microphone windscreen set

[Gear]

79 04.03.11 21:58

Microphones Gea earr

MS-1 Microphone set

MS-2 Microphone set

The MS-1 Microphoneset is a complete and ready to use set. It includes a PM-11 microphone, Microphone stand, clamp and an 6m XLR male to XLR female microphone cable. A very affordable set which is ideal for schools, musicians and mobile DJ’s.

The MS-2 Microphone set is a complete and ready to use set. The MS-2 set includes a PM-12 microphone with an on/off switch, that’s the main difference with the MS-1 set that doesn’t have a on/off switch on the microphone. The MS-2 microphone set includes all necessary accessories you need for a vocal microphone like the microphone stand, clamp and an 6m XLR male to XLR female microphone cable. It is a very affordable set which is ideal for schools, musicians and mobile DJ’s.

D1345

PM-11, Stand and Cable

PM-12, Stand and Cable

Technical information:

Technical information: Element: Polar Pattern: Frequency: Sensitivity: Output impedance:

D1346

Moving Coil Dynamic Hyper-Cardioid 50Hz - 15 kHz -53dB+/-3dB 600 Ohm (at 1 kHz)

80 01_02_DAP_Gear_10_temp2011.indd 80

Element: Polar Pattern: Frequency: Sensitivity: Output impedance:

Microphones

Moving Coil Dynamic Hyper-Cardioid 50Hz - 15 kHz -53dB+/-3dB 600 Ohm (at 1 kHz)

[Gear] 04.03.11 21:58

Microphones Gea earr

PDM-12

PDM-17

The DAP PDM-12 is universal dynamic microphone which is suitable for use in schools, mobile DJ’s and small clubs. It offers an excellent price perfomance ratio and is reliable in use. The PDM-12 has an on/off switch and comes complete with 6m microphone cables (XLR to XLR).

The DAP PDM-17 is universal dynamic microphone which is suitable for use in schools, mobile DJ’s and small clubs. It offers an excellent price perfomance ratio and is reliable in use. The PDM-17 has a loackable on/off switch and comes complete with 6m microphone cables (XLR to XLR).

D1347

Dynamic Vocal Microphone

D1348

Dynamic Vocal Microphone

CM-50

D1322 Vocal/Instrument Back Electret Condenser Microphone

The DAP microphone CM-50 is an extremely rugged supercardioid back electret condenser microphone for professional lead/backup vocal use in live performance with built-intwo stage anti-pop filter which reduces wind and breathing noise. Due to its concept it is an excellent choice for vocals on stage, studio recording and mid-high frequency instrument miking. Cable and adapter inclusive!

Technical information:

Element: Polar Pattern: Frequency: Sensitivity: Output impedance:

Type: Polar pattern: Freq. response: Sensitivity (1000 Hz):

Moving Coil Dynamic Hyper-Cardioid 50Hz-15kHz -53dB +/- 3dB 600 Ohm (at 1 kHz)

Max. SPL: Impedance: Power supply: Connector: Accessories: Net. Weight:

Back Electret Condenser Super Cardioid 50~16000 Hz 4,5 mv/Pa* (*1 Pa = 94 dB SPL) 140 dB (THD ≤ 1% 1000 Hz) 200 Ohm 48V Phantom 3p. XLR (male-type) Treat adapter 5/8, 4/8, 3/8 Stand mount with 5/8 treat 1 storage case 0,21 kg

Cable included!

Microphones 01_02_DAP_Gear_10_temp2011.indd 81

[Gear]

81 04.03.11 21:58

Microphones Gea earr VM-60 D1381

NEW PRODUCT

60’s Vintage Mic

The VM-60 is a dynamic microphone with the performance and looks straight out of the ‘50s and ‘60s. It´s a vocal microphone and has a moving coil with a cardioid pattern. When you use the VM-60 mic you will experience the sound of the 60’s again.

Technical information: Type: Frequ response: Polar pattern: Sensitivity: Max. SPL: Impedance: Power sypply: Connector: Dimensions: Weigh: On / Off swich:

Dynamic, moving coil 40 Hz - 18 KHz Cardioid -52dB (0dB=1V/Pa 1000Hz) 137dB 300 Ohm +/- 30% Not required 3 Pole XLR 190 x 75 x 75 mm (HxWxD) 1Kg Yes

Special features: • 60’s sound character

HM-30

Blues-harp/Harmonica Microphone D1380

The DAP HM-30 is a successor of the legendary crystal-type microphones used for blues-harp. With the latest microphone technology and very fine machining, we present a very cute microphone that will help you steal the show.

ECLM-70 D1418

phone

Professional Instrument Micro-

Outstanding for saxophone, brass and woodwind instruments. • Extended frequency response and wide dynamic range for pure and natural sound delivery. • Good flexible gooseneck and adjustable axis ensure a precise positioning of the microphone • Clamp with elastic grip for secure mic.mounting without damaging the instrument. • Windscreen to prevent pop noise effectively. • A mini-XLR-connector for use with the belt-packs from the eclipse range.

82 01_02_DAP_Gear_10_temp2011.indd 82

Microphones

Technical information: Type: Freq. response: Polar pattern: Sensitivity: Max. SPL: Impedance: Power supply: Connector: Net weight: Dimensions: Accessories:

Dynamic, moving coil 40 Hz - 16 kHz (-3 dB) cardioid 1,2 mV/Pa -58 dB 140 dB 220 Ohm none 3p. XLR male type 276 g 57 mm (diameter) x L 76 mm Wooden box

Technical information: Type: Polar pattern: Freq. Response: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Back-Electret Condenser Cardioid 50-18.000 Hz 3,9 mv/Pa* (*1 Pa = 94 dB SPL) 130 dB (1% THD) 220 Ohm ± 30% 5V Phantom from Beltpack 150 cm cable with 4p. Mini-XLR female-type). Windscreen Mounting clip 1 storage case mic: Ø 12 mm x L 17 mm Gooseneck: 125 mm 0,071 kg

[Gear] 04.03.11 21:58

Microphones Gea earr PL-07 D1301

PM-150

Instrument Dynamic Microphone

D6190

The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and GuitarBass Amps.

Technical information:

Technical Information Type: Dynamic, Moving coil. Freq. response: 40 to 16.500 Hz Polar Pattern: Cardioid Sensitivity (1000 Hz): 1,7 mV/Pa* (*1 Pa = 94 dB SPL) Max. SPL: 137 dB Impedance: 600 Ohm Power supply: none Connector: 3p. XLR (male-type) Accessories: 6 m balanced cable with XLR plugs Dimensions: Ø 32 mm x L 157 mm Net. Weight: 0,245 kg

DM-25

DM-20

The dynamic cartridge of the DAP DM-25 with cardioid polar pattern picks up the most sound from in front and the compact durable metal construction with integral stand mount is tuned specifically for close miking of snare drums, toms and percussion. It features a bright and neutral reproduction.

The DAP microphone DM-20 handles extreme low-frequency volume levels and is specially designed and tuned to capture the low punch of low-frequency instruments like kick-drums or bass-amps. With integral stand mount.

D1333

Instrument Dynamic Mic.

D1332

Instrument Dynamic Mic.

Power supply: Power consumption: Chime Unit: 440, dy up and down) Microphone: Output: Dimensions (LxWxH): Weight:

CM-10

Instrument Back Electret Condenser Microphone D1334

Technical information:

Type: Freq. response: Polar pattern: Sensitivity (1000 Hz):

Type: Polar pattern: Freq. response: Sensitivity (1000 Hz):

Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Dynamic, moving coil. Super Cardioid 20 to 12.500 Hz 2,2 mV/Pa* (*1 Pa = 94 dB SPL) 134 dB (THD ≤ 1% 1000 Hz) 500 Ohm none 3p. XLR (male-type) Treat adapter 5/8, 4/8, 3/8 Integrated stand mount 1 storage case (Ø 43 mm x L 117 mm) 0,212 kg

Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

Microphones 01_02_DAP_Gear_10_temp2011.indd 83

DC 12V 1,6 Watt Melody of 4 frequencies 554, 659 and 880 Hz (meloElectret Condenser 0 dB/1V - 20 dB VR control 150 x 205 x 393 mm 0,7 kg

DK-5 D1331

Instrument microphone kit

The DAP CM-10 is a cardioid condenser microphone designed for Piano, acoustic Guitar, Acoustic Bass, Strings, Woodwinds, Orchestra, Cymbals, Live/studio Recording and Vocals.

Technical information: Dynamic, moving coil. 50 to 16000 Hz Super Cardioid 2,2 mV/Pa* (*1 Pa = 94 dB SPL) 134 dB (THD ≤ 1% 1000 Hz) 500 Ohm none 3p. XLR (male-type) Treat adapter 5/8, 4/8, 3/8 Integrated stand mount 1 storage case (Ø 42 mm x L 117 mm) 0,186 kg

Announcement Microphone

Built-in Chime 4 tone melody • Mic-volume control on backside • Chime volume control on backside • Announcement button on front-topside

Back Electret Condenser Super Cardioid 50~16000 Hz 7 mv/Pa* (*1 Pa = 94 dB SPL) 137 dB (THD ≤ 1% 1000 Hz) 200 Ohm 9~48 Phantom 3p. XLR (male-type) Treat adapter 5/8, 4/8, 3/8 Stand mount with 5/8 treat 1 storage case Ø 29 mm x L 165 mm 0,18 kg

[Gear]

DK-7 D1330

Instrument microphone kit Complete Set!

83 04.03.11 21:59

Microphones Gea earr

COM-41

The COM-41 wireless beltpack is a plug and play wireless starter package. It works on one frequency and it has no advanced menu’s and settings. So this is the easiest way to get started with wireless systems and it will always work. The beltpack transmitter has an indication to warn you when your batteries run low. The package includes a guitar cable, lavelier microphone and headset so this set will offer you everything you need for many applications.

The COM-41 wireless microphone is a plug and play wireless microphone for Dj’s and pubs and schools. It works on one frequency and it has no advanced menu’s and settings. This is the easiest way to get started with wireless microphones and it will always work. The handheld transmitter has a battery indication to warn you when your batteries run low.

D1409

Beltpack UHF Wireless Instrument Set

Technical information:

Special features: • Plug and play • Low battery indication • Guitar cable lavelier microphone and headset included

Modulation: Frequency: Frequency responce: THD: Maximum distance:

FM with thrue diversity 865.000 Mhz 50Hz - 18Khz < 1,0 % (1Khz) Up to 50 meters

Receiver:: Indications: Controls: Audio outputs: Power supply: Dimensions: Weight:

Antenna AB, AF signal On/Off switch, volume, sqelch XLR male balanced, 1/4” jack unbalanced DC 12--15V 300mA 47 x 210 x 160 mm (HxWxD) 0,4 Kg

Transmitter Connector: Headset mic: Lavelier mic: Indications: Controls: RF output power: Battery: Dimensions: Weight:

Dynamic Condenser, cardiod Condenser, cardiod Low battery On/Off/Standby switch, Squelch 30mW 9V Block 108 x 64 247 mm (HxWxD) 0,1 Kg

84 01_02_DAP_Gear_10_temp2011.indd 84

D1408

Handheld Set UHF Wireless Microphone

Technical information:

Special features: • Plug and play • Low battery indication

Modulation: Frequency: Frequency responce: THD: Maximum distance:

FM, diversity 863.550 Mhz 50Hz - 18Khz < 1,0 % (1Khz) Up to 50 meters

Receiver:: Indications: Controls: Audio outputs: Power supply: Dimensions: Weight:

Antenna AB, AF signal On/Off switch, volume, sqelch XLR male balanced, 1/4” jack unbalanced DC 12--15V 300mA 47 x 210 x 160 mm (HxWxD) 0,4 Kg

Transmitter Type microphone: Polar pattern: Indications: Controls: RF output power: Battery: Dimensions: Weight:

Dynamic Cardioid Low battery On/Off/Standby switch, Squelch 30mW 2 x AA size, 1.5V Length 253 mm, diameter 35 mm, 50 mm grill 0,2 Kg

Microphones

[Gear] 04.03.11 21:59

Microphones Gea earr

COM-52 Available models: D141273 Double UHF Wireless Mic System 740-752MHz

D141282

Double UHF Wireless Mic System 822 MHz

2 channel wireless microphone system • UHF diversity receiver with 2 x 1280 selectable Frequency’s • Included 2 dynamic hand-held microphones • Phase locked loop (PLL) circuitry synthetically technology • Automatic selectable receiving system • Multi wireless microphone performing simultaneous with interference elimination feature • 75m transmitting distance • LCD display function • Free and easy operation with clear and pure sound.

Technical information: Frequency stability: Image Interfere rate: S/N Ratio: Sensitivity: T.H.D.: Output connectors:

Audio output impedance: Audio output level: Frequency response: Receive Channel: Power supply: Receiver dimensions: Microphone: Dynamic range: Freq. Range: Spurious rejection: RF-output: Power consumption: Batteries: Material: Dimensions:

+/-0,005% >80 dB >105 dB -107 dB M <0,5% 2 x 3p. XLR balanced 2 x 6,3 mm jack unbalanced 1 x 6,3 mm jack mixed channel A & B 600 Ohm -12 dB 15 - 20.000 Hz Dual 16 channels 12-18V DC 1000 mA 19” x 1U x mm

Beltpack set for COM-51/52 Available models: D141573 740-752MHz, 2 Beltpacks,2 Lavaliers

D141582

>110 dB +/-48 kHz <-50 dB c 10 mW 100 mA 2 x AA 1,5V Plastic body with metal head ø32 x ø50 x 280 mm

Microphones 01_02_DAP_Gear_10_temp2011.indd 85

822-846MHz, 2 Beltpacks,2 Lavaliers

[Gear]

85 04.03.11 21:59

Microphones Gea earr EM-193 Available models: D145173 Wireless PLL handheld micr. 193 freq. 740-764 MHz

D145182

Wireless PLL handheld micr. 193 freq. 822-846 MHz

The DAP EM-193 is a hand-held transmitter with cardioid dynamic microphone head which can be used in combination with the DAP receiver ER-1193. The EM-193 is suitable for vocal parts and voice transmission and can handle up to 193 switchable transmission frequencies in the UHF band. Technical Information Type: Dynamic, moving coil. Polar pattern: Cardioid Freq. Response: 50-16.000 Hz Sensitivity (1000 Hz): Max. SPL: 138 dB (1% THD) Impedance: Power supply: 2 x Battery UM3, AA1.5V (not included) Connector: Acc Accessories: 8 Colour-coded protection caps 1 stand mount 1 storage case Mini screw driver

Carrier Freq. Range: RF Output: Stability: Frequency Deviation: LCD Display: Controls: Spurious Rejection: Dimensions: Net. Weight:

740-764 MHz 10 mW ±0.005% ±48 kHz Frequency, battery fuel gauge Power On/Off, mode setting, AF Level Control, Freq. Up/Down, Lock-on mode <-60 dBC mic: Ø 50mm x L 255mm 0,34 kg

EEB-193 Ava Available models: D145273 Wireless PLL Beltpack Transmitter 193 freq 740-764 MHz

D145282

Wireless PLL Beltpack Transmitter 193 freq 822-846 MHz

• PPLL synthesised 193 switchable frequencies. •O Operation in the UHF range •C Compatible for lavalier or headset microphones • PPowered by AA batteries • EEquipped with 3P mini XLR connector • LLCD Technical Information Tec Frequency Preparation: PL Synthesized Control Carrier Freq. Range: 740-764 MHz RF Output: 10 mW Sta Stability: ±0.005% Frequency Deviation: ±48 kHz LCD Display: Frequency, battery fuel gauge Controls: Power On/Off, AF level, Frequency Up/Down, Lock-on mode Spu Spurious Rejection: < -60 dBC Aud Audio Freq. response: 50 Hz - 16 kHz Battery: UM3, AA 1.5V x 2

86 01_02_DAP_Gear_10_temp2011.indd 86

Microphones

[Gear] 04.03.11 21:59

Microphones Gea earr EM-16 Available models: D143173 Wireless PLL handheld Microphone 16 freq. 740-764MHz

D143182

Wireless PLL handheld Microphone 16 freq. 822-846MHz

The DAP EM-16 is a hand-held transmitter with cardioid dynamic microphone head which can be used in combination with the DAP receiver ER-216. The EM-16 is suitable for vocal and speech transmission and can handle up to 16 switchable transmission frequencies in the UHF band. Technical Information Type: Polar pattern: Frequency Response: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Accessories:

Dynamic, moving coil. Cardioid 50-16.000 Hz 138 dB (1% THD) 2 x Battery UM3, AA1.5V (not included) 8 Colour-coded protection caps 1 stand mount 1 storage case Mini screw driver

Carrier Frequency Range: 740-764MHz RF Output: 10 mW Stability: ±0.005% Frequency Deviation: ±48 kHz LCD Display: Frequency, battery fuel gauge Controls: Power On/Off, mode setting, AF Level Control, Frequency Up/Down, Lock-on mode Spurious Rejection: <-60 dBC Dimensions: mic: Ø 50 mm x L 260 mm Net. Weight: 0,262 kg

EB-16 Available models: D143273 Wireless PLL Beltpack Transmitter 16 freq 740-764MHz

D143282

Wireless PLL Beltpack Transmitter 16 freq. 822 - 846 MHz

• PLL synthesised 16 switchable freq. • Operation in the UHF range • Compatible for lavalier or headset microphones • Powered by AA batteries • Equipped with 3P mini XLR connector • LED Technical Information Frequency Preparation: Crystal Carrier Frequency Range: 740-764MHz RF Output: 10 mW Stability: ±0.005% Frequency Deviation: ±48 kHz LED Display: Power On/Off, Channel Controls: Power On/Off, AF level Spurious Rejection: < -60 dBC Audio Freq. response: 50 Hz - 16 kHz Battery: UM3, AA 1.5V x 2

ER-1193 Available models: D145073 1 Channel 193 Freq. PLL Receiver 740-764 MHz

D145082

1 channel 193 Freq. PLL Receiver 822-846 MHz

• 193 selectable UHF Frequencies. • Available for 1 transmitter • True diversity technology permits minimum dropouts in the RF link • PLL synthesised technology for multi-channels. Technical Information Frequency Preparation: PLL Synthesised Control Carrier Frequency range: 740-764 MHz Frequency Stability: ±0.005% S/N Ratio: >100 dB Display: LCD Display Contents: Frequency, Antenna A/B, Mute display, RF/AF Lever Meter, battery fuel gauge Controls: Power On/Off, Frequency Up/down Frequency Scan, Audio Level

• Compact half-rack metal housing for space saving • “Lock-on” mode avoids accidental modification of frequency, sensitivity and power-off.

Audio Output Level: AF Output Impedance: Squelch: Operation Voltage: Output Connector: Unbalanced Dimensions: (LxWxH)

-12 dB 600 Ohm Pilot Tone & Noise Mute 12-18 VDC, 500 mA XRL Balanced/ 6,3 mm 211 x 152 x 40 mm

Microphones 01_02_DAP_Gear_10_temp2011.indd 87

[Gear]

87 04.03.11 21:59

Microphones Gea earr

ER-216 Available models: D143073 2 Channel 16 Freq. PLL Receiver 740-764 MHz (Germany)

D143082

2 Channel 16 Freq. PLL Receiver 822-846 MHz

• Pre-set 16 selectable UHF channels • Diversity technology permits minimum dropouts • Noise mute and pilot tone squelch circuit eliminate unwanted signal and noise interference • LCD • 19” /1HU rack metal housing

Duracell Procell AA 98040

LR6, MN1500, 1,5V

88 01_02_DAP_Gear_10_temp2011.indd 88

Duracell Procell AAA 98041

LR03, MN2400, 1,5V

Technical Information Receiver Specification: ER-216 Frequency Preparation: PLL Synthesised Control Carry Frequency Range: 740-764 MHz Frequency Stability: ±0,005% S/N Ratio: > 100 dB Display: LCD Display Contents: Channel, antenna A/B, RF/AF Level meter, Battery fuel gauge Controls: Power On/Off, Channel selector, Audio Level Audio Output Level: -12 dB AF Output Impedance: 600 Ohm Squelch: Pilot Tone & Noise Mute Operation Voltage: 12-18VDC, 500 mA

Duracell Procell 98042

Microphones

6LR61, MN1604, 9V

Output Connector: 2 Balanced XRL socket, 1 Unbalanced 6,3 mm socket Dimensions: 483 x 232 x 45 mm (LxWx82

GC-1 D1417 Guitar cable for use with Beltpacks of Eclipse Range

[Gear] 04.03.11 21:59

Microphones Gea earr D1415

D1420

D1416

EH-3

D1426

Universal Headset Microphone

The EH-3 is a back electret condenser microphone which is suitable for the Eclipse series beltpacks as well other common beltpacks with a 4 pole mini XLR. The EH-3 is due it is fine finishing very suitable for theatre and TV applications. • Compact • Skin Color • Removable extension cable • Very thin, so nearly not visible.

D1426

Technical Information Element: Back Electret Condenser Polar pattern: Omni-directional Frequency response: 20Hz – 20kHz Sensitivity: -45dB +-3dB, Output impedance: 2K Ohm +-30% SPL Max.: 140dB Cable: 1,2 mm x 1,2 mm Connector: 4 pole mini XLR

D1419

Spare Cable for EH-3 D1427

EH-1

Condenser Stage Headset Microphone D1416

Uni-direction for high-quality voice pick-up. • Excellent gain-before-feedback and noise isolation. • Lightweight and hands free design provide great freedom. • Ergonomic design ensures comfortable wearing.

Max. SPL: Impedance: Power supply: Connector: Gooseneck: Accessories: Dimensions: Net. Weight:

D1415

Condenser Lavalier Microphone

Uni-direction for high-quality voice pick-up. • Wide dynamic range and frequency response for high quality sound. • Small size for minimum visibility. • Together with clothing clip for easy attaching to a tie, lapel, dress etc.

Technical information:

Technical information: Type: Polar pattern: Freq. Response: Sensitivity (1000 Hz):

EL-1

Back-Electret Condenser Super Cardioid 100-18.000 Hz 3,9 mv/Pa* (*1 Pa = 94 dB SPL) 125 dB (1% THD) 220 Ohm ± 30% 5V Phantom from Beltpack 110 cm cable with 4p. Mini-XLR (female-type) 123 mm Windscreen Integrated Headset mic: Ø 12 mm x L 17 mm 0,056 kg

Type: Polar pattern: Freq. Response: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Accessories: Dimensions: Net. Weight:

EH-2

D1420

range.

The DAP EH-2 is an omni-directional (no proximity effect) condenser microphone designed for voice pick-up. It has a skin colour and is therefore almost not visible for the audience. The wide dynamic range and frequency response provide a high quality sound.

Type: Polar pattern: Freq. response: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Net. Weight: Dimensions: Gooseneck: Accessories:

EL-2

D1419 Miniature Lavalier Microphone for eclipse range.

The DAP EL-2 is an omni-directional (no proximity effect) condenser microphone designed for voice pick-up and various applications. The wide dynamic range and frequency response provide a high quality sound. A clip for easy attaching to a tie, collar, dress, etc. is included. Technical information:

Technical information: Back-Electret Condenser Super Cardioid 100-18.000 Hz 3,9 mv/Pa* (*1 Pa = 94 dB SPL) 125 dB (1% THD) 220 Ohm ± 30% 5V Phantom from Beltpack 110 cm cable with 4p. Mini-XLR (female-type) Windscreen Clothing clip mic: Ø 12 mm x L 17 mm 0,024 kg

Microphones 01_02_DAP_Gear_10_temp2011.indd 89

Head Microphone for eclipse

Back-Electret Condenser Omni 60-15.000 Hz 1 mv / Pa* (*1 Pa = 94 dB SPL) 130 dB (1% THD) 2,2 kilo-Ohm ± 30% Phantom from Beltpack 150 cm cable with 4p. Mini-XLR (female-type) 50 g mic: Ø 5 mm x L 9 mm 125 mm Windscreen 1 protection bag

[Gear]

Type: Polar pattern: Freq. response: Sensitivity (1000 Hz): Max. SPL: Impedance: Power supply: Connector: Net. Weight: Dimensions: Accessories:

Back-Electret Condenser Omni 60-15.000 Hz 1 mv/Pa* (*1 Pa = 94 dB SPL) 130 dB (1% THD) 2,2 kilo-Ohm ± 30% Phantom from Beltpack 150 cm cable with 4p. Mini-XLR (male-type) 50 g mic: Ø 5 mm x L 9 mm 2 x Windscreen Mounting clip 1 protection bag

89 04.03.11 21:59

Microphones Gea earr

In Ear System Transmitter D1481

• For use as in-ear • Tour guide system • to feed active speakers • price effective • special charging hole

Technical Information Operating Frequency: 500-980 MHz Frequency Stability: +0.005% Transmitting power output: 10mW (H), 5mW (L) AF gain adjusting: -20 dB to +35 dB Frequency Response: 50Hz-15KHz ± 3dB Power supply: 2x AA batteries Standing time: about 8 hours

In Ear System Receiver D1480

• Tour guide system • to feed active speakers • price effective

Technical Information Operating Frequency: 500-980 MHz Frequency Response: 50Hz-15KHz ± 3dB AF output change: Earphone / Line Output Power supply: 2x AA batteries Standing time: about 8 hours • Special charging hole • AF output voltage adjusting knob • Noise locked + pilot tone locked

Battery Charger for In-Ear system D1482

Dedicated charger to charge 2 pieces In ear system receiver or transmitter. The charger shows you the status of the batteries. Only to be used with rechargeable batteries.

90 01_02_DAP_Gear_10_temp2011.indd 90

Microphones

[Gear] 04.03.11 21:59

Headphones Gea earr

IEM-100 Beltpack

IEM-100 Available models:

D147079 D147073 D147082

Available models: D147173 UHF PLL 785-811 MHz

In Ear Monitoring System UHF PLL 790-814 MHz In Ear Monitoring System UHF PLL 710-790 MHz In Ear Monitoring System UHF PLL 822-846 MHz

Technical Information Transmitter Specification: Frequency Range: 790 - 814 MHz (D147073) 822 - 846 MHz (D147082) Bandwidth: 25 MHz Oscillation Mode: PLL Synthesized Frequency Stability: ±0.005% 0°C~+50°C Modulation: FM Stereo modulation Output Power: Low:<10 mW; High: <100 mW Spurious Rejection: -60 dB c Max. Deviation Range: 25 kHz Frequency Response: 50 ~ 15.000 Hz T.H.D.: <0.5% (at maximum deviation range at 1 kHz)

D147182

Audio Output: Audio Input: Earphone Output:

Line Level X2, XLR 6.3 mm phone jack X2 6.3 mm stereo phone jack with adjustable volume Earphone Output Imp.: >16 Ohm Antenna Connector: TNT (50 Ohm Impedance) Dimensions: 210 x 175 x 45 mm Receiver Specification: Frequency Range: 790 - 814 MHz (D147079) 822 - 846 MHz (D147082) Bandwidth: 25 MHz Oscillation Mode: PLL Synthesised Frequency Stability: ±0.005% 0°C ~ +50°C

Modulation: Max. Deviation Range: Receiving Mode: Receiving Sensitivity: Squelch Level:

FM Stereo modulation ±68 kHz Diversity Receiving -107 dB m -100 dB m -90 dB m -70 dB m T.H.D.: 1% Max. S/N Ratio: 94 dB A Frequency Response: 80 - 15.000 Hz, ±3 dB Stereo Separation: 35 dB Earphone Output: 3.5 mm Output Power (32 Ohm): 2 x 50 mW under 1 kHz (T.H.D. 3%) Earphone Impedance: >16 Ohm Power Supply: 2 AA batteries Current Consumption: 150 mA Dimensions: 123 x 65 x 27 mm

Microphones 01_02_DAP_Gear_10_temp2011.indd 91

UHF PLL 822-846 MHz

[Gear]

91 04.03.11 21:59

Microphones Gea earr PAS-2 D1445

Separate Antenna for Booster/Splitter Passive Antenna Splitter

D1448

19” Rack Adapter for 2 pieces ER-1193

Antenna Booster

D1453

D1425

For Eclipse range

Antenna Distributor D1444 For Eclipse Range. • Frequency Range: 470 ~ 870 MHz • Provides 4 power supply of DC12V • 4 pairs of antenna output provided • 90 ~ 260V switching power • DC14V antenna booster power provided • Advanced circuit design offers signals with extremely low distortion

Including: 10 x BNC cable 60 cm 1 x Power cable 4 x Power adapter cable 2 x BNC male/female connector

ADA-20 Active UHF D1446 Directional Antenna Receiver Full frequency band: 470 - 870 MHz Effective working angle: 100° Frequency Band: 470 – 870 MHz Antenna Gain: > 10 dB Effective working angle: 100 degrees Connector: Female BNC Weight: 0,4 kg

92 01_02_DAP_Gear_10_temp2011.indd 92

PDA-20 Passive UHF Power supply: Boostergain: With LED indicator

12V, 50 mA 3 dB / 10 dB selectable

D1447 Directional Antenna Receiver Full frequency band: 470-870 MHz Effective working angle: 100° Frequency Band: 470 – 870 MHz Antenna Gain: > 10 dB Effective working angle: 100 degrees

Microphones

Connector: Weight:

Female BNC 0,4 kg

[Gear] 04.03.11 21:59

Headphones Gea earr

DH-135

DH-140

Stereo-headphone deluxe! Brilliant sound without interference or distortion. The big headphone-shells protect the user from “outside noise” and their ergonomic shape provide comfortable wearing. Moreover, the DH135 has a stylish look. Just lean back and enjoy the music!

A professional versatile headphone for a wide range of applications. Dynamic stereo headphone with excellent, transparent sound with bright and clear high Main features: • dynamic stereo headphone frequencies, big mid-tone and forced bass. • Neodymium-ferrous magnet system The stuffed headphone shells guarantee a complete isolation against noise from the out- • Transparent full-frequency reproduction side so that you can enjoy high volumes with- • Large surface radial diaphragm driver unit for clear, high quality sound out interference or distortion. Superb price/ reproduction. quality relation.

D1808

Foldable Headphone

Headphone with Active Bass Drive Unit D1803

HP-200 D1804

Stage Monitor Headphone

DH-150 D1809

DJ Headphone

Technical information:

• Ø40 mm Cobalt Driver Unit • Impedance: 64 Ohm ±15% • Sensitivity: 110 dB ± 3 dB at 1 kHz • Freq. response: 20-20,000 Hz • Maximum Power Input: 100 mw • Rated Power Input: 1 mw • Cord Length: 2m • With Gold Plated 3,5 mm Plug

• Ø40 mm Cobalt Driver Unit • Impedance: 32 Ohm ±15% • Sensitivity: 105 dB ±3 dB at 1 kHz • Freq. response: 20-20,000 Hz • Maximum Power Input: 100 mw • Rated Power Input: 1 mw • Power Requirements: 3V • Cord Length: 2m • With Gold Plated 3,5 mm Plug

• Freq. response: • Impedance: • Sensitivity: • Rated power: • Foldable design • Weight:

Driver unit: Impedance: Sensitivity: Freq. Response: Max Power Input: Cord lenght: Connector: Weight:

0,285 kg

Ø 50 mm 32 Ohm 108 +/- 3 dB 20 - 20.000 Hz 500 mW 1,4m 3,5 mm Plug 0,3 Kg

Special features: • Tight but comfortable fit • Fat Dj sound • Including curled and straight cable • Including extra pair ear cushions

HS-1 Koss headset D1463 Koss In-ear headset with 6 pre-shaped ear cushions

Headphones 01_02_DAP_Gear_10_temp2011.indd 93

DAP DH-150 is a professional fully closed DJ headphone. It has 50mm drivers to ensure a fat bass and clear high frequencies. It is finished with a silica gel headband and has a tight but very comfortable fit. Due to this tight fit and big shells you get a perfect insulation against outside noise. The head shells can be rotated 90° but will automatically flip back. The curled cable is detachable and a straight cable is included just like an extra pair ear cushions. DH-150 proves that a good DJ headphone doesn’t have to be expensive.

Technical information:

20 Hz - 20 kHz 6 Ohm at 1 kHz 104 dB/mW at 1 kHz 0,5W

NEW PRODUCT

[Gear]

93 04.03.11 21:59

Amplifiers Gea earr DSA-250

D4091 2U High Power Class-B Stereo PA Amplifier

Special features: • Compact stylish design (Depth: 335mm) • LCD Display with operational info • 2 Ohm Stable • Speaker relay and clip protection • Link trough XLR connections

DSA-400

2U High Power Double Class-H Stereo PA Amplifier D4092

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: 8 Ohm: 2x 150 Watt RMS 4 Ohm: 2x 260 Watt RMS Bridge mode: 8 Ohm: 520 Watt RMS Frequency Response: 35 - 20,000 Hz, -1 dB THD+N: < 0.1% Damping Factor at 8 Ohm: > 350 Slew Rate: > 32 V/µS Signal to Noise Ratio: > 106 dB A-weighted

DSA-600

2U High Power Double Class-H Stereo PA Amplifier D4093

Input Sensitivity (Selectable): +2.2 dBu Max Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced, 10 kOhm Unbalanced Protection:

Clip Limiter (Fixed) High Temperature Shortcut Protection DC Voltage Subsonic Protection (Fixed) Soft Start

DSA-800

2U High Power Double Class-H Stereo PA Amplifier D4094

Output Modes (Selectable): Cooling: Airflow: Input / Link Connector: Output Connector: Groundlift Switch: Dimensions (W x H x D): Net Weight: Power Supply: Main Fuse:

Stereo / Parallel / Bridge Multi Speed Fan Front to Back XLR / XLR 2x Speakon Yes 483 x 89 x 335 mm 14.5 kg 230 V~, 50-60 Hz F10A, 5 x 20 mm

DSA-1000

D4095 2U High Power Double Class-H Stereo PA Amplifier

Technical information:

Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

Stereo mode:

Stereo mode: RMS

Stereo mode:

8 Ohm: 2x 500 Watt RMS 4 Ohm: 2x 800 Watt RMS 2 Ohm: 2x 1000 Watt RMS

Bridge mode:

8 Ohm: 1600 Watt RMS 4 Ohm: 2000 Watt RMS

Bridge mode:

8 Ohm: 2x 260 Watt RMS 4 Ohm: 2x 400 Watt RMS 8 Ohm: 800 Watt RMS

Bridge mode:

8 Ohm: 2x 330 Watt RMS 4 Ohm: 2x 500 Watt RMS 2 Ohm: 2x 625 Watt RMS 8 Ohm: 1000 Watt RMS 4 Ohm: 1250 Watt RMS

Frequency Response: 35 - 20,000 Hz, -1 dB THD+N: < 0.1% Damping Factor at 8 Ohm: > 350 Slew Rate: > 32 V/µS Signal to Noise Ratio: > 106 dB A-weighted Input Sensitivity (Select.): +2.2 dBu Max Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced, 10 kOhm Unbalanced

Frequency Response: 35 - 20,000 Hz, -1 dB THD+N: < 0.1% Damping Factor at 8 Ohm: > 450 Slew Rate: > 38 V/µS Signal to Noise Ratio: > 106 dB A-weighted Input Sensitivity (Select.): +2.2 dBu Max Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced, 10 kOhm Unbalanced

Protection:

Clip Limiter (Fixed) High Temperature Shortcut Protection DC Voltage Subsonic Protection (Fixed) Soft Start

Output Modes (Select.): Stereo / Parallel / Bridge Cooling: Multi Speed Fan Airflow: Front to Back Input / Link Connector: XLR / XLR Output Connector: 2x Speakon Groundlift Switch: Yes Dimensions (WxHxD): Net Weight: Power Supply: Main Fuse:

483 x 89 x 355 mm 16.5 kg 230 V~, 50-60 Hz F10A, 5 x 20 mm

94 01_02_DAP_Gear_10_temp2011.indd 94

Clip Limiter (Fixed) High Temperature Shortcut Protection DC Voltage Subsonic Protection (Fixed) Soft Start

483 x 89 x 335 mm 16.5 kg 230 V~, 50-60 Hz F10A, 5 x 20 mm

RMS

8 Ohm: 2x 465 Watt 4 Ohm: 2x 700 Watt 2 Ohm: Not Allowed

Bridge mode:

8 Ohm: 1400 Watt RMS 4 Ohm: Not Allowed

Frequency Response: THD+N: Intermod. Distortion: Damping Factor at 8 Ohm: Slew Rate: Input CMRR: Crosstalk 20 - 20,000 Hz: Signal to Noise Ratio: Input Sensitivity: Max Input Voltage: Input Impedance:

10 - 20,000 Hz, -1 dB < 0.03% < 0.05% > 450 > 15 V/µS > 60 dB > 60 dB > 95 dB A-weighted 1 V~, +2.2 dBu +22 dBu 20 kOhm Balanced 10 kOhm Unbalanced

Lowpass filter: 120 Hz, 24 dB/Oct Linkwitz Riley Highpass filter: 120 Hz, 24 dB/Oct Linkwitz Riley Protection: Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start Output Modes (Select.): Stereo / Parallel / Bridge Crossover Modes: Lowpass / Bypass / Highpass Cooling: Dual Speed Fan Airflow: Front to Back Input / Link Connector: XLR / Jack Output Connector: 2x Speakon Groundlift Switch: Yes Dimensions (LxWxH): 482 x 360 x 88 mm Net Weight: 15 kg Power Supply: 240V~, 50 Hz Main Fuse: 15AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 2230 Watt

Amplifiers

Frequency Response: 35 - 20,000 Hz, -1 dB THD+N: < 0.1% Damping Factor at 8 Ohms: > 450 Slew Rate: > 50 V/µS Signal to Noise Ratio: > 106 dB A-weighted Input Sensitivity (Select.): +2.2 dBu Max Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced, 10 kOhm Unbalanced Protection:

Clip Limiter (Fixed) High Temperature Shortcut Protection DC Voltage Subsonic Protection (Fixed) Soft Start

483 x 89 x 335 mm 16.5 kg 230 V~, 50-60 Hz 15A, 5 x 20 mm

[Gear] 04.03.11 21:59

Amplifiers Gea earr

Special features: • Compact stylish design (Depth: 335mm) • LCD Display with operational info • 2 Ohm Stable • Speaker relay and clip protection • Link trough XLR connections

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: RMS RMS RMS Bridge mode:

4 Ohm: 2x 1050 Watt 2 Ohm: 2x 1500 Watt

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

RMS RMS Bridge mode: RMS RMS Frequency Response: THD+N: Damping Factor at 8 Ohm: Slew Rate: Signal to Noise Ratio: Input Sensitivity (Select.): Max Input Voltage: Input Impedance: Subsonic Filter (Select.):

8 Ohm: 2x 840 Watt

Lowpass Filter (Select.): Protection:

2 Ohm: 2x 1920 Watt 8 Ohm: 2720 Watt 4 Ohm: 3840 Watt 15 - 35,000 Hz, -1 dB < 0.03% > 430 > 40 V/µS > 103 dB A-weighted 775 mV~, 1 V~, 1.4 V~ +22 dBu 20 kOhm Balanced 10 kOhm Unbalanced 30 Hz, 18 dB/oct

8 Ohm: 2x 1200 Watt

150 Hz, 18 dB/Oct

Vision-2400

Lowpass Filter (Select.): Protection:

8 Ohm: 3840 Watt

150 Hz, 18 dB/Oct

Vision-3500 D4153

3U High Power Triple Class-H Stereo PA Amplifier

Clip Limiter (Selectable) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Stereo / Parallel / Bridge Multi Speed Fan Back to Front XLR / XLR 2x Speakon. 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (WxHxD): 483 x 89 x 455 mm Net Weight: 36.06 kg Power Supply: 240 V~, 50 Hz Main Fuse: 18AT, 6 x 32 mm Power Consump. (2 x 4 Ohm): 4800Watt

Amplifiers 01_02_DAP_Gear_10_temp2011.indd 95

3U High Power Triple Class-H Stereo PA Amplifier

D4152

Clip Limiter (Selectable) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Stereo / Parallel / Bridge Multi Speed Fan Back to Front XLR / XLR 2x Speakon. 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (WxHxD): 483 x 89 x 455 mm Net Weight: 33.8 kg Power Supply: 240 V~, 50 Hz Main Fuse: 15AT, 6 x 32 mm Power Consump. (2 x 4 Ohm): 3430 Watt

2 Ohm: 2x 2850 Watt

15 - 35,000 Hz, -1 dB < 0.03% > 400 > 44 V/µS > 103 dB A-weighted 775 mV~, 1 V~, 1.4 V~ +22 dBu 20 kOhm Balanced 10 kOhm Unbalanced 30 Hz, 18 dB/oct

2U High Power Class-AB Stereo PA Amplifier

D4151

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

4 Ohm: 2x 1920 Watt

4 Ohm: 5700 Watt

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Output Modes (Select.): Stereo / Parallel / Bridge Cooling: Multi Speed Fan Airflow: Back to Front Input / Link Connector: XLR / XLR Output Connector: 2x Speakon Groundlift Switch: Yes Dimensions (WxHxD): 483 x 89 x 455 mm Net Weight: 24.62 kg Power Supply: 240 V~, 50 Hz Main Fuse: 15AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 3000 Watt

4 Ohm: 2x 1360 Watt

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: RMS

Protection:

8 Ohm: 2x 620 Watt

8 Ohm: 2100 Watt RMS 4 Ohm: 3000 Watt RMS Frequency Response: 8 - 50,000 Hz, -1 dB THD+N: < 0.03% Damping Factor at 8 Ohm:> 400 Slew Rate: > 30 V/µS Signal to Noise Ratio: > 103 dB A-weighted Input Sensitivity (Select.): 775 mV~, 1 V~, 1.4 V~ Max Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced Subsonic Filter (Select.): 30 Hz, 18 dB/oct

Stereo mode: RMS

Vision-1600

[Gear]

95 04.03.11 21:59

Amplifiers Gea earr Special features: In the months April / May 2011 Highlite International BV, expects to sell the 50.000th DAP-audio Palladium Vintage stereo power amplifier.

Elements Series Palladium

These completely redesigned Palladium amplifiers will bring “good looks” into your gear rack! Inspired by the retro-look found in tube-amps and 19” rackgear, this Palladium Vintage offers sufficient power packed in a very stylish housing at a really competitive price! The whole series contains no less than 7 models, each within its own power and price range. Mainfeatures: • Tough “roadproof” housing • 19” rackmountable • True stereo power for DJ Special features: • Very affordable and reliable power • Over 8 years of proven quality • XLR and Jack inputs • Speakon and terminal outputs

P-400 Vintage D4131

Stereo Power Amplifier

Technical information: Stereo mode: Bridged mode:

2 x 100 Watt RMS - 8 Ohm 2 x 200 Watt RMS - 4 Ohm 400 Watt RMS - 8 Ohm

Freq. response:

20 Hz -20 kHz: + 0.1 / - 3 dB (1W / 8 Ohm) THD into 4 Ohm, 1 kHz: <0.05% at 200W SMPER IMD: <0.01% at 100W, into (60 Hz & 7 kHz) Slew Rate: 40V/ µs Damping Factor: 300:1,1 kHz at 8 Ohm Input CMRR (at 1 kHz): >60 dB Voltage Gain: 50 x standard Input Sens. (at 8 Ohm): 0.775V for rated power Input Impedance: Hum and Noise: Crosstalk:

20 kilo-Ohm, balanced 10 kilo-Ohm, unbalanced -103 dB <60 dB

Connectors (per ch.):

Female XLR (pin 2+), TRS (tip +), 5-way Output binding post Power Supply: 230 V / 50-60 Hz Max. Curr. Draw 220V: 5 A Cooling: 2 variable speed DC fans Controls: 2 front attenuators, rear panel signal ground lift jumper Indicators (per ch.): Protection:

Dimensions (LxWxH): Gross Weight: Net Weight:

96 01_02_DAP_Gear_10_temp2011.indd 96

PROTECT LED, CLIP LED, SIGNAL LED, POWER LED Temperature, DC, sub/ultea, sonic short circuit, IGM, output 483 x 400 x 89 mm 20 kg 18 kg

P-500 Vintage

2U High Power Class-AB Stereo PA Amplifier D4132

P-700 Vintage

D4133 2U High Power Class-AB Stereo PA Amplifier

Technical information:

Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

Stereo mode: RMS

RMS

8 Ohm: 2x 180 Watt 4 Ohm: 2x 270 Watt

RMS

8 Ohm: 2x 240 Watt 4 Ohm: 2x 360 Watt

2 Ohm: Not Allowed Bridge mode: 8 Ohm: 540 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodul. Distortion: < 0.01% Damping Factor at 8 Ohm: > 250 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced

2 Ohm: Not Allowed 8 Ohm: 720 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodul. Distortion: < 0.01% Damping Factor at 8 Ohm: > 250 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced

Protection:

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (LxWxH): 483 x 430 x 89 mm Net Weight: 11,78 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 6.3AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 850 Watt

Amplifiers

Bridge mode:

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (LxWxH): 483 x 430 x 89 mm Net Weight: 13,44 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 8AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 1100 Watt

[Gear] 04.03.11 21:59

Amplifiers Gea earr

P-900 Vintage

2U High Power Class-AB Stereo PA Amplifier D4134

P-1200 Vintage

2U High Power Double Class-H Stereo PA Amplifier D4135

P-1600 Vintage

2U High Power Double Class-H Stereo PA Amplifier D4136

P-2000 Vintage

D4137 2U High Power Double Class-H Stereo PA Amplifier

Technical information:

Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven:

Stereo mode: RMS

RMS

8 Ohm: 2x 350 Watt 4 Ohm: 2x 525 Watt

RMS

8 Ohm: 2x 530 Watt 4 Ohm: 2x 800 Watt

RMS

8 Ohm: 2x 600 Watt 4 Ohm: 2x 900 Watt

Technical information:

RMS

8 Ohm: 2x 700 Watt 4 Ohm: 2x 1050 Watt

2 Ohm: Not Allowed Bridge mode: 8 Ohm: 1050 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodulation Distortion: < 0.01% Damping Factor at 8 Ohm: > 250 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced

2 Ohm: Not Allowed Bridge mode: 8 Ohm: 1600 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodulation Distortion: < 0.01% Damping Factor at 8 Ohm: > 300 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 k Ohm Balanced 10 k Ohm Unbalanced

2 Ohm: Not Allowed Bridge mode: 8 Ohm: 1800 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodulation Distortion: < 0.01% Damping Factor at 8 Ohm: > 300 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced

2 Ohm: Not Allowed 8 Ohm: 2100 Watt RMS 4 Ohm: Not Allowed Frequency Response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05% Intermodul. Distortion: < 0.01% Damping Factor at 8 Ohm: > 300 Slew Rate: > 40 V/µS Input CMRR: > 60 dB Crosstalk 20 - 20,000 Hz: > 60 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity: 1 V~, +2.2 dBu Max. Input Voltage: +22 dBu Input Impedance: 20 kOhm Balanced 10 kOhm Unbalanced

Protection:

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (LxWxH): 483 x 430 x 89 mm Net Weight: 15,32 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 10AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 1650 Watt

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (W x H x D): 483 x 89 x 430 mm Net Weight: 16,26 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 10AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 2300 Watt

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (LxWxH): 483 x 430 x 89 mm Net Weight: 18,96 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 12AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 2440 Watt

Amplifiers 01_02_DAP_Gear_10_temp2011.indd 97

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

[Gear]

Bridge mode:

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Output Modes (Select.): Cooling: Airflow: Input / Link Connector: Output Connector:

Stereo / Parallel / Bridge Dual Speed Fan Front to Back XLR / Jack 2x Speakon, 2 Pair Bindings Posts Groundlift Switch: Yes Dimensions (LxWxH): 483 x 430 x 89 mm Net Weight: 19 kg Power Supply: 200 - 240 V~, 50 Hz Main Fuse: 15AT, 5 x 20 mm Power Consump. (2 x 4 Ohm): 2925 Watt

97 04.03.11 22:00

Amplifiers Gea earr

Special features: • Rugged but lightweight steel housing (15Kg) • Tour proof amplification quality • 2 Ohm Stable • Tight and high bass pressure • Very reliable due to overdimensioned switching power supply

Stage-Amp Series

• Professional switched mode power amplifier. • Strong, rugged steel housing. • Clear led indicators for status mode, signal input, protection, clip, overheat.

Stage-Amp 2.2

Stage-Amp 2.6

Stage-Amp 4.0

Stage-Amp 4.4

Amplifier

D4502

2 x 1050W SMPS Power

D4503

2 x 1400W SMPS Power

D4504

2 x 2000W SMPS Power

D4505

2 x 2500W SMPS Power

Technical information:

Stereo output power 8 Ohm: Stereo output power 4 Ohm: Stereo output power 2 Ohm: Bridge output power 8 Ohm: Bridge output power 4 Ohm: Frequency response (8 Ohm):

650W (1) 1100W (1) 1500W (2) 2200W (1) 3100W (2) 20 Hz- 20 kHz, +/- 0,5 dB S/N Ratio: >90 dB Input sensitivity: 0,775V/1,0V/1,4V THD+N (8 Ohm, 1 kHz) ? Output power: <0,07% Damp. Fact. (8 Ohm, 1 kHz): >200 Amplifier: 3 steps Class H Slewrate: 13V/uSec Protection circuit: DC/Short circuit /VHF/Temp Cooling: Internal heatsink with front to rear airflow Signal input connectors: XLR 3 pin, male/female Speaker output connectors: Binding post, 4 pole speakon Dimensions (LxWxH): 483 x 500 x 89 mm Weight: 15,0 kg

Stereo output power 8 Ohm: 800W (1) Stereo output power 4 Ohm: 1300W (1) Stereo output power 2 Ohm: 2000W (2) Bridge output power 8 Ohm: 2600W (1) Bridge output power 4 Ohm: 4100W (2) Frequency response (8 Ohm): 20 Hz- 20 kHz, +/- 0,5 dB S/N Ratio: >90 dB Input sensitivity: 0,775V/1,0V/1,4 V THD+N (8 Ohm, 1 kHz) ? Output power: <0,07% Damp. Fact. (8 Ohm, 1 kHz): >200 Amplifier: 3 steps Class H Slewrate: 13V/uSec Protection circuit: DC/Short circuit /VHF/Temp Cooling: Internal heatsink with front to rear air flow Signal input connectors: XLR 3 pin, male/female Speaker output connectors: Binding post, 4 pole speakon Dimensions (LxWxH): 483 x 500 x 89 mm Weight: 15,0 kg

Stereo output power 8 Ohm: 1200W (1) Stereo output power 4 Ohm: 2000W (1) Stereo output power 2 Ohm: 3000W (2) Bridge output power 8 Ohm: 4000W (1) Bridge output power 4 Ohm: 6000W (2) Frequency response (8 Ohm): 20 Hz- 20 kHz, +/- 0,5 dB S/N Ratio: >90 dB Input sensitivity: 0,775V/1,0V/1,4V THD+N (8 Ohm), 1 kHz) ? output power: <0,07% Damp. Fact. (8 Ohm, 1 kHz): >200 Amplifier: 3 steps Class H Slewrate: 13V/uSec Protection circuit: DC/Short circuit /VHF/Temp Cooling: Internal heatsink with front to rear airflow Signal input connectors: XLR 3 pin, male/female Speaker output connectors: Binding post, 4 pole speakon Dimensions (LxWxH): 483 x 500 x 89 mm Weight: 16,0 kg

Stereo output power 8 Ohm: Stereo output power 4 Ohm: Stereo output power 2 Ohm: Bridge output power 8 Ohm: Bridge output power 4 Ohm: Frequency response (8 Ohm):

1450W (1) 2200W (1) 3500W (2) 4500W (1) 7000W (2) 20 Hz- 20 kHz, +/- 0,5 dB S/N Ratio: >90 dB Input sensitivity: 0,775V/1,0V/1,4V THD+N (8 Ohm), 1 kHz) ? Output power: <0,07% Damp. Fact. (8 Ohm, 1 kHz): >200 Amplifier: 3 steps Class H Slewrate: 13V/uSec Protection circuit: DC/Short circuit /VHF/Temp Cooling: Internal heatsink with front to rear airflow Signal input connectors: XLR 3 pin, male/female Speaker output connectors: Binding post, 4 pole speakon Dimensions (LxWxH): 483 x 500 x 89 mm Weight: 16,0 kg

(1)The output power is tested conform EIA Standard. (2) The output power is tested conform 1 kHz, 1 x THD, 40 mSec Burst

(1)The output power is tested conform EIA Standard.(2)The output power is tested conform 1 kHz, 1 x THD, 40 mSec Burst

(1)The output power is tested conform EIA Standard. (2)The output power is tested conform 1 kHz, 1 x THD, 40 mSec Burst

98 01_02_DAP_Gear_10_temp2011.indd 98

Amplifiers

[Gear] 04.03.11 22:00

Amplifiers Gea earr DPA-1200 Vintage

1U Compact Class-D Stereo HEXFET Power Amplifier

D4180

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: RMS RMS Frequency Response: THD+N: Crosstalk: Signal to Noise Ratio: Input Sensitivity (Selectable): Input Impedance:

Protection:

8 Ohm: 2x 375 Watt 4 Ohm: 2x 750 Watt 2 Ohm: Not Allowed 5 - 30,000 Hz, -1 dB < 0.05% > 70 dB > 105 dB A-weighted 1.1 V~ 10 kOhm Unbalanced 20 kOhm Balanced

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature Soft Start

Output Mode: Stereo Only Cooling: Multi Speed Fan Airflow: Front to Back Input Connector: XLR Jack Combo Output Connector: 2x Speakon Groundlift Switch: No Dimensions (W x H x D): 483x44.9x491 mm Net Weight: 10.36 kg Power Supply: 200 - 260 V~, 50 Hz Power Consumption (2 x 4 Ohm): 1725 Watt

DPA-2400 Vintage D4181

1U Compact Class-D Stereo HEXFET Power Amplifier

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: RMS RMS

8 Ohm: 2x 625 Watt 4 Ohm: 2x 1200 Watt

2 Ohm: Not Allowed Frequency Response: 5 - 30,000 Hz, -1 dB THD+N: < 0.05% Crosstalk: > 70 dB Signal to Noise Ratio: > 105 dB A-weighted Input Sensitivity (Selectable): 1.1 V~ Input Impedance: 10 kOhm Unbalanced 20 kOhm Balanced Protection:

Output Overload DC Voltage High Temperature Soft Start Output Mode: Stereo Only Cooling: Multi Speed Fan Airflow: Front to Back Input Connector: XLR Jack Combo Output Connector: 2x Speakon Groundlift Switch: No Dimensions (W x H x D): 483 x 44.9 x 491 mm Net Weight: 10.8 kg Power Supply: 200 - 260 V~, 50 Hz Power Consumption (2 x 4 Ohm): 2800 Watt

Clip Limiter (Fixed) Short Circuit Input Overload

DPA-3400 Vintage D4182

1U Compact Class-D Stereo HEXFET Power Amplifier

Technical Information Output Power, 1000 Hz, THD+N at 1%, Both Channels Driven: Stereo mode: RMS RMS

8 Ohm: 2x 1000 Watt 4 Ohm: 2x 1800 Watt

Soft Start Output Mode: Stereo Only Cooling: Multi Speed Fan Airflow: Front to Back Input Connector: XLR Jack Combo Output Connector: 2x Speakon Groundlift Switch: No Dimensions (W x H x D): 483 x 44.9 x 491 mm Net Weight: 10.96 kg Power Supply: 200 - 260 V~, 50 Hz Power Consumption (2 x 4 Ohm): 4200 Watt

Clip Limiter (Fixed) Short Circuit Input Overload Output Overload DC Voltage High Temperature

Amplifiers 01_02_DAP_Gear_10_temp2011.indd 99

[Gear]

99 04.03.11 22:00

Amplifiers Gea earr

Falcon Amplifier Range

The new Falcon amplifier range is a true breakthrough in the world of amplifiers. With this new Falcon amplifier range DAP brings you a true 100% digital amplifier for the price of only a conventional order. The Falcon digital amplifiers are lightweight, powerful and have a stylish design. It is equipped with all necessary safety features and protections as well a clean sound in all circumstances. Key features: • Lightweight • Compact design • Full digital sound processing • 8 Ohm, 4 Ohm and Bridge mode • High efficiency • Environment friendly • Stylish design • Very affordable Digital amplifier. • Class D Amplifiers Special features: • Entry level digital amplifier • Compact design (Depth only 302mm) • Very silent by audio-controlled fan speed • Complete digital sound processing

100 01_02_DAP_Gear_10_temp2011.indd 100

Falcon 700 D4200

2x420W 4Ohm

Falcon 1000 D4201

2x480W 4Ohm

Technical information:

Load Impedance: 8 Ohm 4 Ohm Rated output power: 2x 240W 420W Max. bridged output power: 840W Max. RMS voltage swing: 40V Slew Rate: 40V/us Input Sensitivity: 1.0V THD: 1% IMD-SMPTE: 1% DIM30: 1% Crosstalk: 70dB Frequency response: <± 2dB Input impedance: 20k Damping factor: 400 Signal to noise ratio: >110dB Power requirements: AC 230V (50/60Hz) Dimensions (LxWxH): 483 x 302 x 89 mm Weight: 6,7 kg Protection: overheat, thermal output power control, long term output power control, output short-circuit, overload protection, DC protection

Load Impedance: 8 Ohm 4 Ohm Rated output power: 280W 480W Max. bridged output power: 960W Max. RMS voltage swing: 48V Slew Rate: 40V/us Input Sensitivity: 1.0V THD: 1% IMD-SMPTE: 1% DIM30: 1% Crosstalk: 70dB Frequency response: <± 2dB Input impedance: 20k Damping factor: 400 Signal to noise ratio: >110dB Power requirements: AC 230V (50/60Hz) Dimensions (LxWxH): 483 x 302 x 89 mm Weight: 6,9 kg Protection: overheat, thermal output power control, long term output power control, output short-circuit, overload protection, DC protection

Amplifiers

[Gear] 04.03.11 22:00

Amplifiers Gea earr

Falcon 1500 D4202

2x650W 4Ohm

Falcon 1700 D4203

Falcon 2000

2x720W 4Ohm

D4204

2x850W 4Ohm

Technical information:

Load Impedance: 8 Ohm 4 Ohm Rated output power: 375W 650W Max. bridged output power: 1300W Max. RMS voltage swing: 53V Slew Rate: 40V/us Input Sensitivity: 1.0V THD: 1% IMD-SMPTE: 1% DIM30: 1% Crosstalk: 70dB Frequency response: <± 2dB Input impedance: 20k Damping factor: 400 Signal to noise: >110dB Power requirements: AC 230V (50/60Hz) Dimensions (LxWxH): 483 x 302 x 89 mm Weight: 6,9 kg Protection: overheat, thermal output power control, long term output power control, output short-circuit, overload protection, DC protection

Load Impedance: 8 Ohm 4 Ohm Rated output power: 420W 720W Max. bridged output power: 1440W Max. RMS voltage swing: 60V Slew Rate: 40V/us Input Sensitivity: 1.0V THD: 1% IMD-SMPTE: 1% DIM30: 1% Crosstalk: 70dB Frequency response: <± 2dB Input impedance: 20k Damping factor: 400 Signal to noise ratio: >110dB Power requirements: AC 230V (50/60Hz) Dimensions (LxWxH): 483 x 302 x 89 mm Weight: 6,9 kg Protection: overheat, thermal output power control, long term output power control, output short-circuit, overload protection, DC protection

Load Impedance: 8 Ohm 4 Ohm Rated output power: 520W 850W Max. bridged output power: 1700W Max. RMS voltage swing: 60V Slew Rate: 40V/us Input Sensitivity: 1.0V THD: 1% IMD-SMPTE: 1% DIM30: 1% Crosstalk: 70dB Frequency response: <± 2dB Input impedance: 20k Damping factor: 400 Signal to noise ratio: >110dB Power requirements: AC 230V (50/60Hz) Dimensions (LxWxH): 483 x 302 x 89 mm Weight: 6,9 kg Protection: overheat, thermal output power control, long term output power control, output short-circuit, overload protection, DC protection

Amplifiers 01_02_DAP_Gear_10_temp2011.indd 101

[Gear]

101 04.03.11 22:00

Portable Soundsystems Gea earr

Special features: • Main power- & integrated battery operation • Built in battery charger • All in one concept: tuner, CD, USB, SD, wireless mic’s • Trolley model makes transportation easy

PSS-108 D2603

8” Portable Speaker System

Special features: • Main power- & integrated battery operation • Built in battery charger • All in one concept: tuner, CD, USB, SD, D, wireless mic’s • Trolley model makes transportation easy

NEW PRODUCT

PSS-110 D2604

10” Portable Speaker System

NEW PRODUCT

The PSS serie is available with 8”, 10”and 12” speakers.

Key features: • Battery & 230V operation • Integrated charger • 2 x Wireless microphone • CD / USB / SD Player • Tuner • Echo & Tone control • 3 x mic input • Aux input

Technical information:

Technical information: Power supply: Battery: Battery life: Fuse: Powerconsumption: Rated power: Frequency response: Speaker components:

AC 115/230 V - 50/60 Hz 3 X 6V7, 2AH >5H T 1,6A 50 Watt 25 Wrms (4Ohm speaker) 50Hz-20kHz (aux) 50Hz-10kHz (mic) 10” Low & 3” mid high driver

Inputs:

EQ High: EQ Low: SNR:

3 x Mic (-44dB) 1 x Aux (-14dB) 1x Tape Rec (-8,5dB) 1 x Line Out (-8,5dB) 12 kHz (±12dB) 80 Hz (±12dB) >66dB

FM 733,000 MHz (±15kHz) & 745,000 MHz (±15kHz) 40 Meter Dynamic, cardioid pattern 50Hz - 20Khz

Microphone specification Modulation: Frequency range: Maximum distance mic: Microphone type: Frequency response:

FM 733,000 MHz (±15kHz) & 745,000 MHz (±15kHz) 40 Meter Dynamic, cardioid pattern 50Hz - 20Khz

485 x 298 x 260 mm 17,5 Kg

Dimensions (HxWxD): Weight:

485 x 298 x 260 mm 19 Kg

Power supply: Battery: Battery life: Fuse: Powerconsumption: Rated power: Frequency response: Speaker components:

AC 115/230 V - 50/60 Hz 3 X 6V7, 2AH >5H T 1,6A 50 Watt 25 Wrms (4Ohm speaker) 50Hz-20kHz (aux) 50Hz-10kHz (mic) 8” Low & 3” mid high driver

Inputs:

EQ High: EQ Low: SNR:

3 x Mic (-44dB) 1 x Aux (-14dB) 1x Tape Rec (-8,5dB) 1 x Line Out (-8,5dB) 12 kHz (±12dB) 80 Hz (±12dB) >66dB

Microphone specification Modulation: Frequency range: Maximum distance mic: Microphone type: Frequency response: Dimensions (HxWxD): Weight:

Outputs:

102 01_02_DAP_Gear_10_temp2011.indd 102

Outputs:

Portable Soundsystems

[Gear] 04.03.11 22:00

Portable Soundsystems Gea earr

Special features: • Main power- & integrated battery operation • Built in battery charger • All in one concept: tuner, CD, USB, SD, wireless mic’s • Trolley model makes transportation easy

PSS-112 D2605

12” Portable Speaker System

NEW PRODUCT

The PSS series are wireless PA systems with integrated self charging batteries. They are compact and complete with two wireless microphones, a CD-SD-USB player, tuner and audio mixer. It is an one in all concept that is very easy to use for events at places where you don´t have access to a main power supply like: • Fair events • Theme parks • Sport events • Outdoor church services • Street musicians • Product presentations The PSS serie is available with 8”, 10”and 12” speakers. Key features: • Battery & 230V operation • Integrated charger • 2 x Wireless microphone • CD / USB / SD Player • Tuner • Echo & Tone control • 3 x mic input • Aux input Technical information: Power supply: Battery: Battery life: Fuse: Powerconsumption: Rated power: Frequency response: Speaker components:

AC 115/230 V - 50/60 Hz 3 X 6V7, 2AH >5H T 1,6A 80 Watt 25 Wrms (4Ohm speaker) 50Hz-20kHz (aux) 50Hz-10kHz (mic) 12” Low & 3” mid high driver

Inputs:

EQ High: EQ Low: SNR:

3 x Mic (-44dB) 1 x Aux (-14dB) 1x Tape Rec (-8,5dB) 1 x Line Out (-8,5dB) 12 kHz (±12dB) 80 Hz (±12dB) >66dB

Microphone specification Modulation: Frequency range: Maximum distance mic: Microphone type: Frequency response:

FM 733,000 MHz (±15kHz) & 745,000 MHz (±15kHz) 40 Meter Dynamic, cardioid pattern 50Hz - 20Khz

Dimensions (HxWxD): Weight:

485 x 298 x 260 mm 19,5 Kg

Outputs:

Portable Soundsystems 01_02_DAP_Gear_10_temp2011.indd 103

[Gear]

103 04.03.11 22:00

Studio-Microphones Rec ecor ordi or ding di ng

CM-1 D1360

Technical information:

Small Diagram Pencil Condenser

The DAP CM-1 is a thin model condensermicrophone that comes with a cardioid and omni element. Depending on the application or personal taste the element can be exchanged. The CM-1 is ideally suited as a microphone for recording live ambient, drum overhead or acoustic instruments.

104 01_02_DAP_Gear_10_temp2011.indd 104

Type: Freq. response: Polar pattern: Sensitivity: Max. SPL: Impedance: power supply: Connector: Net weight: Dimensions: Accessories:

Condenser 30 Hz - 22 kHz (-3 dB) omni or cardioid 10 mV/Pa -40 dB 132 dB 200 Ohm +48V phantom XLR male type 130 g 23 mm (diameter) x L 150 mm microphone-clip

CM-67 D1366

Studio FET Condenser Mic.

The DAP CM-67 is a large diaphragm condenser-microphone for recording purposes. But it can also be used for live sound amplification in not so rough situations like acoustic ensembles or orchestras.

Studio-Microphones

Technical information: Type: Freq. response: Polar pattern: Sensitivity: Max. SPL: Impedance: Power supply: Connector: Net weight: Dimensions: Accessories:

Condenser 30 Hz - 20 kHz (-3 dB) cardioid 14 mV/Pa -38 dB 128 dB 200 Ohm 48V Phantom power 3p. XLR male type 390 g 50 mm (diameter) x L 151 mm Shockmount

[Recording] 04.03.11 22:00

Studio-Microphones Rec ecor ordi or ding di ng

CM-87

Large membrane Condenser Microphone D1365

The DAP CM-87 is a large diaphragm condenser-microphone for recording purposes. But it can also be used for live sound amplification in not so rough situations like acoustic ensembles or orchestras.

Technical information: Type: Freq. response: Polar pattern: Sensitivity: Max. SPL: Impedance: Power supply: Connector: Net weight: Dimensions: Accessories:

Condenser 20 Hz - 20 kHz (-3 dB) cardioid, figure-of-8, omni switchable 8 mV / Pa -42 dB 130 dB / 140 dB switchable 200 Ohm 48V Phantom power 3p. XLR male type 470 g 50 mm (diameter) x L 167 mm Shockmount

TM-47 D1370

Tube Microphone

The DAP TM-47 is a classic model condensor-microphone that uses a tube as internal amplifier. This way the microphone has an unsurpassed warm sound and a large dynamic range. It has a large membrane condenser element of which the characteristic can be changed in 9 steps from omni, via cardioid to figure of 8.

Studio-Microphones 01_02_DAP_Gear_10_temp2011.indd 105

Technical information:

[Recording]

Type: Freq. resp.: Polar pattern: Sensitivity: Max. SPL: Impedance: Power supply: Connector: Net weight: Dimensions: Accessories:

Condenser / tube 20 Hz - 20 kHz (-3 dB) omni - cardioid - figure-of-8 20 mV / Pa -36 dB 134 dB / 144 dB (-10 dB switch) 200 Ohm included 9 m dedicated cable / XLR male type 1500 g mic. at 68 mm x L 185 mm case, protection-bag, power-supply, mains-cable, interconnection-cable, spider shock-mount and windscreen.

105 04.03.11 22:00

Studio-Microphones Rec ecor ordi or ding di ng Special features: • Plug and play • no drivers needed • Works with PC and MAC • High quality AD converter • For vocal recordings

RM-101 D1375

Ribbon Microphone

The DAP RM-101 is a classic model ribbonmicrophone that convinces with an unsurpassed warm sound when used for voices. Due to the 2” large ribbon and the figure of 8 characteristic it can also be used for recordings with a realistic ambience.

106 01_02_DAP_Gear_10_temp2011.indd 106

Technical information: Type: Freq. response: Polar pattern: Sensitivity: Max. SPL: Impedance: Power supply: Connector: Net weight: Dimensions: Accessories:

Electromagnetic / ribbon 30 Hz - 18 kHz (-3 dB) figure-of-8 1,8 mV/Pa -55 dB 145 dB 200 Ohm none cable with 3p. XLR male type 1000 g 72 mm (diameter) x L 247 mm protection-bag and case

URM-1 D1601

USB Studio Condenser microphone

NEW PRODUCT

This USB microphone is the most easy solution for instant recording without having expensive interfaces, driver problems and setup procedures. Do you have a creative musical idea, connect the URM-1 with your PC or MAC, start recording and surprise yourself with the professional sound quality. The URM-1 has a 22mm moving golden diaphragm with a cardioid pickup pattern and works with practically all DAW software. The URM-1 comes with USB cable, shockmount and carry pouch. Technical Information Type: Freq response: Polar pattern: Sensitivity: 1v / Pa 1000 Hz) Max SPL: THD ) Capsule: capsule SN Ratio: Sampling rate: Power: Connector: Dimensions: eter, lenght)

Studio-Microphones

Condenser 30Hz - 18kHz Cardioid -32 +/- 2 db (0db = 140 db (at 1 Khz < 1`% 22mm gold diapharms 68 db 16 bit, 48 Khz USB powered USB connector 45 x 185 mm (diam-

[Recording] 04.03.11 22:00

Interfaces Rec ecor ordi or ding di ng UCI-20 D1631

USB Jack Instrument interface

NEW PRODUCT

Special features: • No drivers needed • PC and MAC compatible • Works with all dynamic microphones

The UCI-20 is the most easy solution for instant recording of guitars and bass guitars without having expansive interface’s, drivers problems and setup procedures. Connect the ? TRS Mono plug into your guitar and the USB plug with a PC or MAC and your ready to record. It works with practically all DAW software programs. When the UCI-20 is connected and ready to use the USB connector will light up. It has a sampling rate of 16Bit, 44,1Khz that´s also the standard sample rate of every CD and gives you the quality to make professional recordings. Technical Information Connectors: jack Drivers: Operating system: Vista/Windows 7/ MAC A/D converter: SNR: Signal boost gain: Lenght:

USB & 1/4 TRS mono No drivers needed Windows 2000/ XP/ 16 Bit, 44,1 Khz/48Khz 85dB 22dB 3M

UCI-10 D1630

USB XLR Microphone interface

NEW PRODUCT

Special features: • No drivers needed • PC and MAC compatible • Works with all dynamic microphones

The UCI-10 is the most easy solution for instant recording with all kinds of dynamic microphones without expensive interfaces, difficult drivers and setup procedures. Connect a dynamic microphone with the XLR plug and connect the USB plug with a PC or MAC and you are ready to record. It works with practically all DAW software programs. When the UCI-10 is connected and ready to use the USB connector will light up. It has a sampling rate of 16Bit, 44,1Khz which is the standard sample rate of every CD and gives you the quality to make proffesional recordings. Technical Information Connectors: Drivers: Operating system: Vista/Windows 7/ MAC A/D converter: SNR: Signal boost gain: Lenght:

USB & XLR female No drivers needed Windows 2000/ XP/ 16 Bit, 44,1 Khz/48Khz 85dB 22dB 3M

Interfaces 01_02_DAP_Gear_10_temp2011.indd 107

[Recording]

107 04.03.11 22:00

Interfaces Rec ecor ordi or ding di ng DS-CV1 D1241

USB-Line/Phone Convertor incl software

Analog to Digital music converter & Software • Convert your old vinyl, tapes and CD’s • Add an extra audio output to your computer • USB Powered • Apple MAC & Windows PC Compatible Technical Information Allows for Analog Music Players to be Converted to Digital Media Connect the USB Cable to the USB Port on the Computer (with LED Indication) Record function with Adjustable Volume (+,-) Level Control Audacity Recording Editing Software Included Inputs: Phono, Line input (3.5mm Jack)/ 2 Channel Stereo RCA Audio Output Outputs: Stereo Left/Right 2 Channel Audio Output Dimensions: 65 x 103 x 32 mm (LxWxH)

108 01_02_DAP_Gear_10_temp2011.indd 108

Interfaces

[Recording] 04.03.11 22:00

Studio-monitors Rec ecor ordi or ding di ng Monitor One D3109

40W - Near field monitor Speakerset. This set contains 2 pcs.

The DAP Monitor One is an entry level near field monitor for use in home-recording studios or any other audio-playback and monitoring environment. This unit provides a clear, linear sound reproduction in a smooth, modern designed housing without spending a fortune. Technical Information 2-way passive vented near field monitor speaker system Woofer: 5” Tweeter: 3” cone tweeter Nominal Impedance: 8 Ohm Power Handling: 40 Watt Continuous 80 Watt Program 160 Watt Peak

2,78

185 170 255

5”

Sensitivity (Full Space): 86 dB/W/m Peak SPL at 1 m (Theoretical): 108 dB Dimensions (LxWxH)): 185 x 170-145 x 255-190 mm Net Weight: 2,78 kg

8 Ohm

40W

Active Studio Monitor D3108

The Active Studio Monitor is the active version of the Monitor One. The perfect system for a near field monitor set-up. Technical Information 2-way passive vented near field monitor speaker system Build in Loudness circuits Woofer: 5” Tweeter: 3” cone tweeter Amplifier Output Power: 2x 30 Watt RMS Freq. Response (-3 dB): 45 – 20,000 Hz

150 210 300

5”

Sensitivity (Full Space): 86 dB / W / m Max. SPL at 1 m (Theoretical):100.8 dB Dimensions (LxWxH): 150 x 210 x 300 mm Net Weight: 6 kg

2 x 30W

Studio-monitors 01_02_DAP_Gear_10_temp2011.indd 109

[Recording]

109 04.03.11 22:00

Interior & Acoustics Rec ecor ordi or ding di ng DDS-01 D1395

NEW PRODUCT

DDS-02 Acoustic diffuser screen

The DDS-01 acoustic diffuser screen is an affordable, portable solution for improving the sound of the acoustic space around the microphone. By allowing the sound to pass through several individual layers, the DDS-01 gently diffuses the acoustic waves surrounding the microphone, keeping the sound from bouncing back toward the microphone, which improves the detial and sonic character of your recordings. DDS-01 comes complete with all the accessories to attach the screen to your microphone stand and even use the screen for stereo recording as well.

D1396

Acoustic diffuser screen

DDS-02 is an affordable and useful accessory for recording. This screen will effectively improve the sound of the acoustic space around the microphone and help to record a better dry signal. Even with a budget microphone it is possible to achieve professional recordings due to this acoustic screen. The frame can easily be mounted on the top of a microphone stand and with the included adapter you can fix any microphone clamp on it. It is possible to adjust the length between the microphone and the screen to achieve your desired sound.

Special features: • Affordable but steady model • Adjustiable mic to screen position • Lightweight

ASM-01 D1390

Acoustic black foam, am, 5 cm thick ck

Thickness 5 cm, 2 cm pyramid and 3 cm base 50 x 50 cm tile Fire retardant Black foam

ASM-02 D1391

Acoustic white foam,, 5 cm thick

Thickness 5 cm, 2 cm pyramid and 3 cm base 50 x 50 cm tile Fire retardant White foam

110 01_02_DAP_Gear_10_temp2011.indd 110

ASM-03 D1392

Acoustic black foam, 10 cm thick

Thickness 10 cm, 5 cm pyramid and 5 cm base 50 x 50 cm tile Fire retardant Black foam

DWT-01 Windscreen

DWB-01 Windscreen

For condenser mic. 16 cm diameter 3 cm

D1319 Big size 5 cm diameter, length 9,5 cm

D1318

Interior & Acoustics

[Recording] 04.03.11 22:00

Accessories Rec ecor ordi or ding di ng Microphone holder D1701

mount

44-48 mm black anti shock

NEW PRODUCT

Microphone holder D1702

mount

Microphone holder

44-48 mm Grey anti shock

NEW PRODUCT

D8552

D1704

mount

22-24 mm Grey anti shock

NEW PRODUCT

Nylon pop filter

For microphone stands

Metal pop filter

D1750

D1751

NEW PRODUCT

19 Inch Rack metal

With adjustable Toploading

D8553

Technical Information Dimensions: 550 x 560 x 760mm (LxWxH) Weight: 27,5 kg

With non-adjustable Toploading

Technical Information 16U Dimensions: 540 x 515 x 1040 mm (LxWxH) Weight: 11,3 kg

Accessories 01_02_DAP_Gear_10_temp2011.indd 111

Microphone holder

22-24 mm Black anti shock

NEW PRODUCT

19 Inch Rack metal

mount

Headphone holder D8964

D1703

[Recording]

111 04.03.11 22:01

Entry Level Series Spe peak aker ak erss er MCM-8

MC-Series

Without any doubt one of the most popular speakersystems on the market! The DAP MCSeries is a professional looking speakerseries with an outstanding price/quality relation! The range incorporates a variety of speaker enclosures, each with its own characteristics and field of use. Be sure to check them out and judge for yourself.

D3153

Special features: • Value for money • Entry level Speakercabinet 300 320 430

8,6

MC-8 D3154

Full range cabinet 75W 8 Ohm

Technical Information 3-way passive vented PA speaker system Woofer: MB-8 Piezo Mid / High: P-2 Piezo Tweeter: P-1 Nominal Impedance: 8 Ohm Power Handling: 75W Continuous 150W Program 300W Peak Sensitivity (Full Space): 89 dB/W/m Peak SPL at 1 m: 113.8 dB Stand adapter inner Ø: 36 mm Dimensions (LxWxH): 265 x 305 x 490 mm Net Weight: 8,6 kg

8,6

265 305 490

8”

8 Ohm

75W

112 01_02_DAP_Speakers_10_temp2011.indd 112

Sidefill 75W 8 Ohm

Technical Information 2-way passive vented side monitor speaker system Woofer: MB-8 Piezo Tweeter: P-2 Nominal Impedance: 8 Ohm Power Handling: 75 Watt Continuous 150 Watt Program 300 Watt Peak Sensitivity (Full Space): 89 dB / W / m Peak SPL at 1 m (Theoret.): 113.8 dB Stand adapter inner side Ø: 36 mm Dimensions: 300 x 320 x 430 mm (LxWxH) Net Weight: 8,6 kg

MC-10 D3155

Full range cabinet 125W 8 Ohm

Technical Information 3-way passive vented PA speaker system Woofer: MB-10 Piezo Mid / High: P-2 Piezo Tweeter: P-1 Nominal Impedance: 8 Ohm Power Handling: 125W Continuous 250W Program 500W Peak Sensitivity (Full Space): 90 dB / W / m Peak SPL at 1 m (Theoret.): 117 dB Stand adapter inner Ø: 36 mm Dimensions (LxWxH): 370 x 265 x 510 mm Net Weight: 10,72 kg

10,72

125W

370 265 510

10”

8 Ohm

8”

8 Ohm

MC-12 D3156

Full range cabinet 200W 8 Ohm

Technical Information 2-way passive vented PA speaker system Woofer: MB-12 Piezo Mid / High Driver: DP-12 Nominal Impedance: 8 Ohm Power Handling: 200W Continuous 400W Program 800W Peak Sensitivity (Full Space): 92 dB / W / m Peak SPL at 1 m (Theoret.): 121 dB Stand adapter inner side Ø: 36 mm Dimensions (LxWxH): 390 x 440 x 650 mm Net Weight: 17,32 kg

17,32

390 440 650

12”

200W

Entry Level Series

8 Ohm

75W

MC-15 D3157

Full range cabinet 250W 8 Ohm

Technical Information 2-way passive vented PA speaker system Woofer: MB-15 Piezo Mid / High Driver: DP-12 Nominal Impedance: 8 Ohm Power Handling: 250W Continuous 500W Program 1000W Peak Sensitivity (Full Space): 92 dB / W / m Peak SPL at 1 m (Theoret.): 122 dB Stand adapter inner side Ø: 36 mm Dimensions (LxWxH): 440 x 475 x 750 mm Net Weight: 22,38 kg

22,38

440 475 750

15”

8 Ohm

250W

[Speakers] 04.03.11 22:16

Entry Level Series Spe peak aker ak erss er

MCM-15 D3152

Floormonitor 250W 8 Ohm

Technical Information 3-way passive vented monitor speaker system Woofer: MB-15 Piezo Mid / High: P-2 Piezo Tweeter: P-1 Nominal Impedance: 8 Ohm Power Handling: 250W Continuous 500W Program 1000W Peak Sensitivity (Full Space): 92 dB / W / m Peak SPL at 1 m (Theoret.): 122 dB Dimensions (LxWxH): 525 x 475 x 455 mm Net Weight: 24 kg

525 475 455

15”

8 Ohm

250W

MC-215 D3158

Full range cabinet 500W 4 Ohm

Technical Information 3-way passive vented PA speaker system Woofer: 2x MB-15-4, 4 Ohm each Piezo Mid / High Driver: 1x DP-12 Piezo Tweeter: 3x P-1 Nominal Impedance: 4 Ohm Power Handling: 500W Continuous 1000W Program 2000W Peak Sensitivity (Full Space): 95 dB / W / m Peak SPL at 1 m (Theoret.): 128 dB Dimensions (LxWxH): 440 x 475 x 1150 mm Net Weight: 34 kg

440 475 1150

15”

4 Ohm

500W

MCB-15 D3159

MCM-12

Subwoofer 250W 8 Ohm

20,38

435 480 555

15”

Floormonitor 200W 8 Ohm

Technical Information 3-way passive vented PA monitor speaker system Nominal Impedance: 8 Ohm Woofer: MB-12 Piezo Mid / High: P-2 Piezo Tweeter: P-1 Power Handling: 200W Continuous 400W Program 800W Peak Sensitivity (Full Space): 92 dB / W / m Peak SPL at 1 m (Theoret.): 121 dB Dimensions (LxWxH): 520 x 460 x 400 mm Net Weight: 15,66 kg

8 Ohm

15,66

250W

520 460 400

12”

8 Ohm

200W

Entry Level Series 01_02_DAP_Speakers_10_temp2011.indd 113

D3151

Technical Information 15” passive vented subwoofer Woofer: MB-15 Nominal Impedance: 8 Ohm Power Handling: 250W Continuous 500W Program 1000W Peak Sensitivity (Half Space): 98 dB / W / m Peak SPL at 1 m (Theoret.): 128 dB Stand adapter inner side Ø: 36 mm Dimensions (LxWxH): 435 x 480 x 555 mm Net Weight: 20,38 kg

[Speakers]

113 04.03.11 22:16

Mobile Road Series Spe peak aker ak erss er

Special features: s: • Lightweight • Scratch resistantt ABS housing • Neodymium woofers

PS-108

PS-110 PS-1 PS -110 -1 10

8/1 passive plastic ic ventedd PA speaker spe peak aker er system sys yste tem te m

110/1 0/11 passive 0/ pass pa ssiv ss ivee plastic iv plas pl astiticc vented vent ve nted nt ed PA PA speaker spea sp eake ea kerr system ke syst sy stem st em D3569

D3568

Technical Information Nominal Impedance: Power Handling: Freq. Response (-3 dB): Freq. Range (-10 dB): Sensitivity (Full Space): Peak SPL at 1 m (Theoretical): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

7,8

295 230 430

Technical Information Nominal Impedance: Power Handling:

8 Ohm 160 Watt Continuous 320 Watt Program 640 Watt Peak 125 - 20.000 Hz 85 - 22.000 Hz 94 dB / W / m 122 dB 90° x 60° 295 x 230 x 430 mm 7,8 kg

8 Ohm

114 01_02_DAP_Speakers_10_temp2011.indd 114

Freq. Response (-3 dB): Freq. Range (-10 dB): Sensitivity (Full Space): Peak SPL at 1 m (Theoretical): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

160

10,7

Mobile Road Series

8 Ohm 160 Watt Continuous 320 Watt Program 640 Watt Peak 65 - 20.000 Hz 52 - 22.000 Hz 94 dB / W / m 122 dB 90° x 60° 360 x 270 x 505 mm 10,7 kg

360 270 505

8 Ohm

160

[Speakers] 04.03.11 22:16

Mobile Road Series Spe peak aker ak erss er

PS-112 PS-1 PS -112 12

12/1.4 passiv passive ivee plastic plas pl astiticc ve vent vented nted ed PPA A sp spea speaker eake ea kerr system ke syst sy stem st em D3570

12,8

420 320 595

8 Ohm

Woofer: Neodymium eodymium

15/1.4 15/ 5/1.4 passive passiv ivee plastic plas pl astiticc vented vent ve nted nt ed PA PA speaker spea sp eake ea kerr system ke syst sy stem st em D357 D3571

Technical Information Nominal Impedance: Power Handling:

8 Ohm 240 Watt Continuous 480 Watt Program 960 Watt Peak 65 - 20.000 Hz 48 - 22.000 Hz 97 dB / W / m 126 dB 90° x 60° 420 x 320 x 595 mm 12,8 kg

12”

PS-115 PS-1 PS -115 15

Freq. Response (-3 dB): Freq. Range (-10 dB): Sensitivity (Full Space): Peak SPL at 1 m (Theoretical): Nominal Dispersion (HxV): Dimensions (WxHxD): Net Weight:

240

16,8

Mobile Road Series 01_02_DAP_Speakers_10_temp2011.indd 115

465 405 690

Woofer: Neodymium

8 Ohm 240 Watt Continuous 480 Watt Program 960 Watt Peak 45 - 20.000 Hz 35 - 22.000 Hz 96 dB / W / m 125.8 dB 90° x 60° 465 x 405 x 690 mm 16,8 kg

15”

[Speakers]

8 Ohm

240

115 04.03.11 22:16

Mobile Road Series Spe peak aker ak erss er

Special features: eatures: • Bi amped • Line andd Mic input • Neodymium um woofers • Scratch resistant ABS housing • Lightweight

Engineered in The Netherlands!

PS-112A

12/1.4 Active plastic vented PA speaker system D3575

Technical Information Amplifier Power Low: Amplifier Power High: Nominal Input Sensitivity: Maximum Input Signal: Freq. Response (-3 dB): Freq. Range (-10 dB): Sensitivity (Full Space): Peak SPL at 1 m (Theoretical): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

17,7

420 320 595

225 Watt RMS in 8 Ohm 150 Watt RMS in 8 Ohm. 0 dBu +12 dBu 65 - 20.000 Hz 48 - 22.000 Hz 97 dB / W / m 123 dB 90° x 60° 420 x 320 x 595 mm 17,7 kg

12”

300W

116 01_02_DAP_Speakers_10_temp2011.indd 116

PS-115A Woofer: Neodymium

15/1.4 Active plastic vented PA speaker system D3576

22,8

Mobile Road Series

465 405 690

Woofer: Neodymium

225 Watt RMS in 8 Ohm 150 Watt RMS in 8 Ohm. 0 dBu +12 dBu 45 - 20.000 Hz 35 - 22.000 Hz 96 dB / W / m 122.8 dB 90° x 60° 465 x 405 x 690 mm 22,8 kg

15”

300W

[Speakers] 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

Cover for PS-108 D3582

Cover for PS-110 D3583

Cover for PS-112 D3584

Mobile Road Series 01_02_DAP_Speakers_10_temp2011.indd 117

Cover for PS-115 D3585

[Speakers]

117 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

K-112

NEW PRODUCT

2-way fullrange speakersystem 300W 8 Ohm D3551

Technical Information 12/1 passive plastic vented PA speaker system Woofer: 12”, 8 Ohm 63 mm Voice Coil High Driver: 1.375” Titanium Dome, 8 Ohm, 34 mm Voice Coil Nominal Impedance: 8 Ohm Power Handling: 225 Watt Continuous 450 Watt Program 900 Watt Peak Freq. Response (-3 dB): 75 - 15.000 Hz Freq. Range (-10 dB): 60 - 18.000 Hz Sensitivity (Full Space): 96 dB / W / m Peak SPL at 1m (Theoretical): 125.5 dB Nominal Dispersion (HxV): 65° x 65° Dimensions (LxWxH): 430 x 310 x 575 mm Net Weight: 15,52 kg

15,52

430 310 575

12”

8 Ohm

118 01_02_DAP_Speakers_10_temp2011.indd 118

K-112

2-way fullrange speakersystem 300W 8 Ohm D3551

NEW PRODUCT

225W

19,68

Mobile Road Series

450 350 690

15”

8 Ohm

225W

[Speakers] 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

Speaker Cover for K-112 D7931

Speaker Cover for K-115 D7932

Case for two K-112/K-115 D7580 Technical information:

Mobile Road Series 01_02_DAP_Speakers_10_temp2011.indd 119

[Speakers]

119 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

Entertainmer Mobile Set Basic

NEW PRODUCT

D3208

The Entertainer Mobile Set Basic is just like it’s bigger brother but with less inputs and functionality. If you don’t need wireless microphones a CD/DVD player and tuner this set can be at your service and save you some money. It has 4 microphone inputs 2 line inputs by jack, RCA and mini jack this will ensure any input source can be connected. If you got your music on an USB stick than you are good to go because the basic set has an built-in USB MP3 Player. Some handy things about the Entertainer Mobile Set Basic are the 7 band main EQ, internal echo and the possibility to switch the amplifier to 1 x stereo or 2 x mono if you like to use it as main and monitor set-up. The Entertainer Mobile Set Basic is ideal for live jam sessions, presentations, schools and sport instructors.

Special features: • All-in-one lightweight compact set with built-in trolley for easy transportation. • Handy storage compartment for cables and microphones. • Easy to use for non technical users. • Mini jack input connection for mp3 players • Built-in USB MP3 Player.

Speaker adapters included, speaker stands not included! Technical Information 1. 8 Channel signal input, 4 Mic, 2 stereo 2. Independent Tone control for High, Mid and Low 3 band EQ with ±12dB range 3. System 7 band EQ with ±12dB range 4. 16 Echo DSP Presets 5. USB MP3 Player 6. Speakers 2 x 10” woofer + 2 x 1” Titanium Driver Frequency response send: Frequency response output: Output Power: THD: Output Protection:

20 Hz - 20KHz 1dB 45 Hz - 20KHz -3dB Max 2 x 150W, 8 OHM < 1% distortion, overload, shortcircuit thermal Inputting Impedance Mono Channels: 2 K Ohm mic / 33 K Ohm line Inputting Impedance Stereo Channel: 10 K Ohm Distortion: < 0.05%, 20 Hz - 20KHz 1dB Rating Output. S/N Ratio: > 80dB at 1W. “lA” WTD Return Input impedance: 47 K Ohm Max. Input level mic: -14dBu

120 01_02_DAP_Speakers_10_temp2011.indd 120

Max input level line: LED Indications: Connections: Power supply: Accessories:

+15dBu Stereo: +21dBu Signal Level, Power On/Off, Protection & Clipping Line, Mic, Send/Return, Tape output, Aux Send/Return; Foot Switch, Speaker, USB 115V/230V, 50/60Hz (switched) Speaker cables, 35mm speaker adapters, power cable

Mobile Road Series

[Speakers] 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

Entertainmer Mobile Set Active D3207

The Entertainer set is a truly multifunctional soundsystem which is ideal for presentations, schools, gyms and even mobile DJs. Due to its sturdy and compact design it can fit in any car and is therefore ideal for many mobile applications. Stands NOT included!!!

Special features: • All in one entertainment system • Plug & Play complete active set • Including wireless remote, microphone and beltpack • Powerful 150W 10” speakers • Road-proof ABS housing Technical Information 1. 10 Channel signal input, (2 Wireless Microphones, 4 MIC/LINE, 2 Stereo MP3 Input Connection (3.5mm) 2. Independent Tone control for High, Mid and Low 3 band EQ with ±12dB range 3. System 7 band EQ with ±12dB range 4. DVD/CD Player, compatable DVD/VCD/CD/HDCD/DVD-R/MP3/MPEG4/ Photo viewing, video out (composite, RCA connector) 5. 99 Digital DSP Effects 6. USB Computer Connection Port, Record Output/Input 7. FM/AM Digital Stereo Tuner 8. Output Power 2 x 150W/8ohm, protection on output distortion, overload and short-circuit thermal protection. Switching style power supply, voltage range: 115V/230V, 50/60Hz 9. 2 Crossover speaker system, 2 x 10” woofer + 2 x 1” Titanium Driver 10.Connections: Line Send/Return, Analog Record Output, REV/AUX Send/Return; Foot Switch Control, Video Output 11. LED Indications: Signal Level, Power On/Off, Protection and Clipping

Stands NOT included! See page 170.

Frequency Response: 20 Hz - 20KHz 1dB 45 Hz - 20KHz -3dB Distortion:

Output from Send Max. Output on Speakon

< 0.05%, 20 Hz - 20KHz 1dB Rating Output. S/N Ratio> 80dB at 1W. “lA” WTD

Output Power: 150W / ch Rated Power, 8 OHM, Two channels driving THD < 1% Inputting Impedance (1,2,3,4 Channel: “Wireless Handheld Microphone”, 2 K OHM “Line”33 K OHM Inputting Impedance ( 5-6 / 7-8 Stereo Ch.: 10 K Ohm) Max. Inputting Level MIC: -14dBu LINE:+15dBu Stereo: +21dBu Return Inputting Impedance: 47 K OHM DVD/U Disk Play:

Compactable DVD/VCD/CD/HDCD/ DVD-R/MPEG-4/MP3/ Photo Viewing, MP3, WMA Audio Format 2.0 High-speed Data Transporting

Mobile Road Series 01_02_DAP_Speakers_10_temp2011.indd 121

Digital Stereo Tuner: Receiving Sensitivity: Fuse: Microphone:

Audio Outputting Cables:

Receiving Frequency FM 87.5 108.0MHz AM 522 - 1620KHz FM 12dBpv/m AM +26dBu/m S/N Ratio: FM>46dB AM>34dB Stereo Crosstalk FM > 20dB T4A 250V UHF Wireless Microphone (walking range more than 50 m (Frequency Response: 50Hz-15 KHz +/- 3dB) XLR connection and 1 / 4 “ (6.35 adapter) 2 x 6m

Digital DSP Effects: 99 Effects 24-bit DSP Effect Module USB Computer Connection Port: Analog- Digital, Digital-Analog Switching, 2.0 high-speed data transporting

[Speakers]

121 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er RX-Series The DAP RX series is the upgrade of the popular RW series. The RW series has proven itself for the last 6 years in good quality and reliability. The upgrade from RW to RX takes this series from an entry-level to a professional level. Not only the design has had a total makeover but also the electronics, new cross-over and components have been used for this upgrade. The RX series still has an entry price level but gives you the sound quality of the professional series. The RX series is very suitable for mobile DJ’s and installations in smaller venues and clubs.

18”

15” 12” 10”

Special features: • High driver with 1,375” Titanium Dome • Stylish design with structure paint finish • Engineered in the Netherlands

RX-10 D3311

8 Ohm

Passive 10/1.4” Speaker 160W

Special features: • High driver with 1.375” Titanium Dome • More sound pressure due to new woofer • Engineered in the Netherlands • Only one amplifier needed for a complete set up with 4 subs and 2 tops

RX-12 D3312

8 Ohm

Passive 12/1.4” speaker 240W

Technical information:

Woofer: 10”, 8 Ohm, 50 mm Voice Coil High Driver: 1,375” Titanium Dome, 8 Ohm, 34 mm Voice Coil Power Handling: 160 Watt Continuous 320 Watt Program 640 Watt Peak Freq. Response (-3 dB): 65 - 16.000 Hz Crossover Frequency: 3000 Hz, 12 dB/Oct Sensitivity (Full Space): 94 dB / W / m Peak SPL at 1 m: 122 dB Nominal Dispersion (H x V): 60° x 40°

Woofer:

17,22

411 418 593

10”

122 01_02_DAP_Speakers_10_temp2011.indd 122

High Driver: 8 Ohm, 34 mm Voice Coil Power Handling:

21,2

RX-15 D3313

8 Ohm

Passive 15/1.4” Speaker 240W

Technical information: 12”, 8 Ohm, 65 mm Voice Coil 1,375” Titanium Dome,

240 Watt Continuous 480 Watt Program 960 Watt Peak Freq. Response (-3 dB): 63 - 17.000 Hz Crossover Frequency: 2000 Hz, 18 dB/Oct Sensitivity (Full Space): 97 dB / W / m Peak SPL at 1 m (Theoretical): 126 dB Nominal Dispersion (H x V): 90° x 50°

424 482 663

Special features: • High driver with 1,375” Titanium Dome • Better radius due to new woofer • Engineered in the Netherlands • Only one amplifier needed for a complete set up with 4 subs and 2 tops

12”

Woofer:

34 mm Voice Coil 240 Watt Continuous 480 Watt Program 960 Watt Peak Freq. Response (-3 dB): 60Hz - 17.000 Hz Crossover Frequency: 2000 Hz, 12 dB/Oct Sensitivity (Full Space): 96 dB / W / m Peak SPL at 1 m (Theoretical): 125.8 dB Nominal Dispersion (H x V): 90° x 50° Power Handling:

26,4

Mobile Road Series

471 529 803

RX-18B D3314

8 Ohm

Passive 18” Subwoofer 300W

Technical information: 15”, 8 Ohm, 65 mm Voice Coil 1,375” Titanium Dome,

High Driver: 8 Ohm,

Special features: • Built-in passive crossover for satellite speakers • Fase invert switch for high output • Internal cross-over by-pass switch • Only one amplifier needed for a complete set up with 4 subs and 2 tops

15”

Woofer: Power Handling:

18”, 75 mm Voice Coil 300 Watt Continuous 600 Watt Program 1200 Watt Peak Freq. Response (-3 dB): 45 - 160 Hz Freq. Range (-10 dB): 38 - 200 Hz Crossover Frequency Low: 160 Hz, 12 dB/Oct Crossover Frequency High: 160 Hz, 6 dB/Oct Sensitivity (Half Space): 101 dB / W / m Peak SPL at 1 m (Theoretical): 131.8 dB Nominal Dispersion (H x V): 360° x 180°

40,6

617 595 762

18”

[Speakers] 04.03.11 22:17

Mobile Road Series Spe peak aker ak erss er

Special features: • Bang & Olufsen ICE power amp • Loudness switch with automatic tone control at any sound pressure level. • External speaker output (minimal 8Ohm) • Integrated mixer with tone control • Engineered in the Netherlands

12”

10”

NEW PRODUCT

RX-10A D3315

Active 10/1.4” Speaker

Technical information:

15”

NEW PRODUCT

RX-12A

18”

NEW PRODUCT

RX-15A

RX-18BA

Active 12/1.4” Speaker with B&O D3317 Active 15/1.4” Speaker with B&O D3318 Active 18” Subwoofer with ICE Power Amp Power Amp Power Amp D3316

Technical information:

Type Speaker: Enclosure material:

Active multifunctional Wood

Type Speaker: Enclosure material:

Active multifunctional Wood

Type Speaker: Enclosure material:

Active multifunctional Wood

Type Speaker: Enclosure material:

Sensitivity: Peak SPL @1m : Nom dispersion (HxV): Amplification: Amplifier power: External speaker: Frequency response:

94 dB / 1 Watt / 1 Meter 120.5 dB 60° x 40° Class-D, Conventional 450 Wrms, 4 Ohm Minimal 8 Ohm 65 Hz - 18 kHz

Sensitivity: Peak SPL @1m : Nom dispersion (HxV): Amplification: Amplifier power: External speaker: Frequency response:

97 dB / 1 Watt / 1 Meter 123 dB 90° x 50° Class-D, Conventional 450 Wrms, 4 Ohm Minimal 8 Ohm 63 Hz - 18 kHz

Sensitivity: Peak SPL @1m : Nom dispersion (HxV): Amplification: Amplifier power: External speaker: Frequency response:

96 dB / 1 Watt / 1 Meter 122.5 dB 90° x 50° Class-D, Conventional 450 Wrms, 4 Ohm Minimal 8 Ohm 60 Hz - 18 kHz

Sensitivity (Half Space): 101 dB / 1 Watt / 1 Meter Peak SPL at 1m (theoretical): 127.5 dB Nominal dispersion (HxV): 360° x 180° Amplification: Class-D, Conventional Amplifier power: 450 Wrms, 4 Ohm Frequency response (-3dB): 65 Hz - 16 kHz

Inputs: Tone control:

Line & Mic Bass & Treble

Inputs: Tonecontrol:

Line & Mic Bass & Trebble

Inputs: Tonecontrol:

Line & Mic Bass & Trebble

Power supply: Power consumption:

AC 230 50Hz 540 Watt

Powersupply: Power consumption:

AC 230 50Hz 540 Watt

Powersupply: Power consumption:

AC 230 50Hz 540 Watt

Stand adapter: Mounting points: Mounting point size: Safety eye possibility:

35 mm 3 Flying rails Yes

Stand adapter: Mounting points: Mounting point size: Safety eye possibility:

35 mm 3 Flying rails Yes

Stand adapter: Mounting points: Mounting point size: Safety eye possibility:

35 mm 3 Flying rails Yes

27,5

31,8

Mobile Road Series 01_02_DAP_Speakers_10_temp2011.indd 123

Active Subwoofer Wood

Power supply: AC 230-240V - 50/60Hz Maximum power consumption: 540 Watt Stand adapter:

M20 screw

[Speakers]

123 04.03.11 22:17

Multifunctional Series Spe peak aker ak erss er SM-Series

The DAP SM series comprises a range of high-performance loudspeaker cabinets for professional sound reinforcement for short to medium distances. All Tops are equipped with M-10 screws for rigging eyes, metal top hats, build-in handles and 4 stand pods and the 15” and 18” woofers are equipped with steel flange plates for top speaker-tubes. Special features: • Integrated rigging strips • High-Performance short throw cabinet • Suitable as stage monitor due to asymmetric housing

SM-10 MKII D3390

Speakers 1 x 10” + 1.75” HF Driver 200W 8 Ohm

Technical Information Nominal Impedance: Power Handling:

8 Ohm 200 Watt Continuous 400 Watt Program 800 Watt Peak Freq. Response (-3 dB): 70 – 17.000 Hz Freq. Range (-10 dB): 55 – 22.000 Hz Crossover Frequency: 2400 Hz, 18 dB/Oct Sensitivity (Full Space): 95 dB / W / m Peak SPL at 1 m: 124 dB (Theoretical) Nominal Dispersion (HxV): 50 - 100° x 55° Dimensions (LxWxH): 290 x 325 x 520 mm Net Weight: 12,34 kg

12,34

290 325 520

Mounting:

Tophat 35mm, flying strip

Flying Eye 10”

8 Ohm

Available models:

200W

SM-12 MKII D3391

Speakers 1 x 12” + 1.75” HF Driver 250W 8 Ohm

Technical Information Nominal Impedance: Power Handling:

8 Ohm 250 Watt Continuous 500 Watt Program 1000 Watt Peak Freq. Response (-3 dB): 63 – 17.000 Hz Freq. Range (-10 dB): 50 – 22.000 Hz Crossover Frequency: 2200 Hz, 12 dB/Oct Sensitivity (Full Space): 96 dB / W / m Peak SPL at 1 m: 126 dB (Theoretical) Nominal Dispersion (HxV): 50 - 100° x 55° Dimensions (LxWxH): 400 x 350 x 640 mm Net Weight: 22,4 kg

22,4

SM-15 MKII

400 350 640

12”

8 Ohm

124 01_02_DAP_Speakers_10_temp2011.indd 124

Mounting:

250W

D3392

Tophat 35mm, flying strip

D8418

Big

D8428

Small

Speakers 1 x 15” + 1.75” HF Driver 300W 8 Ohm

Technical Information Nominal Impedance: Power Handling:

8 Ohm 300 Watt Continuous 600 Watt Program 1200 Watt Peak Freq. Response (-3 dB): 55 – 17.000 Hz Freq. Range (-10 dB): 42 – 22.000 Hz Crossover Frequency: 2000 Hz, 18 dB/Oct Sensitivity (Full Space): 97 dB / W / m Peak SPL at 1 m: 127.8 dB (Theoretical) Nominal Dispersion (HxV): 50 - 100° x 55° Dimensions (LxWxH): 460 x 400 x 710 mm Net Weight: 28 kg

Multifunctional Series

460 400 710

15”

8 Ohm

Mounting:

Tophat 35mm, flying strip

300W

[Speakers] 04.03.11 22:18

Multifunctional Series Spe peak aker ak erss er

CX-6

D3339

6.5/1.4” coaxial speaker system

Technical Information Nominal Impedance: 8 Ohm Power Handling: 120 Watt Continuous 240 Watt Program 480 Watt Peak Freq. Response (-3 dB): 50 – 17.000 Hz Freq. Range (-10 dB): 42 – 22.000 Hz Crossover Frequency: 2000 Hz, 12-18 dB/Oct Sensitivity (Full Space): 91 dB/W/m Peak SPL at 1 m: 117.8 dB (Theoretical) Nominal Dispersion: 90° Conical Dimensions (LxWxH): 220 x 214 x 295 mm Net Weight: 6 kg

CX-8

D3340

8/1.4” coaxial speaker system

Technical Information Nominal Impedance: 8 Ohm Power Handling: 120 Watt Continuous 240 Watt Program 480 Watt Peak Freq. Response (-3 dB): 50 – 17.000 Hz Freq. Range (-10 dB): 42 – 22.000 Hz Crossover Frequency: 2000 Hz, 12-18 dB/Oct Sensitivity (Full Space): 93 dB/W/m Peak SPL at 1 m: 119.8 dB (Theoretical) Nominal Dispersion: 90° Conical Dimensions (LxWxH): 260 x 249 x 330 mm Net Weight: 8,36 kg

8,36

260 249 330

8”

8 Ohm

Special features: • Uniform sound distribution • Brackets included • Zero phase shift due to coaxial speaker • Warm sound at low level • Ideal as monitor or fixed installation speaker

CX-10 D3341

10/1.4” coaxial speaker system

Technical Information Nominal Impedance: 8 Ohm Power Handling: 200 Watt Continuous 400 Watt Program 800 Watt Peak Freq. Response (-3 dB): 60 – 17.000 Hz Freq. Range (-10 dB): 45 – 22.000 Hz Crossover Frequency: 1800 Hz, 12-18 dB/Oct Sensitivity (Full Space): 95 dB / W / m Peak SPL at 1 m: 124 dB (Theoretical) Nominal Dispersion: 60° Conical Dimensions (LxWxH): 310 x 329 x 420 mm Net Weight: 14,4 kg

14,4

310 329 420

10”

8 Ohm

Coaxial-Series

DAP Audio added a complete new range of speakers to its already wide range. The CX-range is the latest addition and features a complete range of coaxial speakers. The coaxial speakers are ideal for monitor use as well as fixed installation. Due to the coaxial speaker the CX-range has hardly any phase-shift. They also give the performer more freedom of movement than normally allowed by conventional horn loaded speakers. Due to the compact structure of the cabinets, the CX-range will fit in every interior or on every stage.

CX-12 D3342

12/1.4” coaxial speaker system

Technical Information Nominal Impedance: 8 Ohm Power Handling: 250 Watt Continuous 500 Watt Program 1000 Watt Peak Freq. Response (-3 dB): 60 – 17.000 Hz Freq. Range (-10 dB): 45 – 22.000 Hz Crossover Frequency: 1800 Hz, 18-12 dB/Oct Sensitivity (Full Space): 96 dB / W / m Peak SPL at 1 m: 126 dB (Theoretical) Nominal Dispersion: 60° Conical Dimensions (LxWxH): 370 x 375 x 485 mm Net Weight: 16,82 kg

16,82

370 375 485

Multifunctional Series 01_02_DAP_Speakers_10_temp2011.indd 125

12”

8 Ohm

[Speakers]

CX-15 D3343

15/1.4” coaxial speaker system

Technical Information Nominal Impedance: 8 Ohm Power Handling: 300 Watt Continuous 600 Watt Program 1200 Watt Peak Freq. Response (-3 dB): 60 – 17.000 Hz Freq. Range (-10 dB): 45 – 22.000 Hz Crossover Frequency: 1700 Hz, 12-18 dB/oct Sensitivity (Full Space): 97 dB / W / m Peak SPL at 1 m: 127.8 dB (Theoretical) Nominal Dispersion: 60° Conical Dimensions (LxWxH): 465 x 438 x 600 mm Net Weight: 26,72 kg

26,72

465 438 600

15”

8 Ohm

125 04.03.11 22:18

High Grade Series Spe peak aker ak erss er X-Series Passive

The DAP X-Series is a collection of professional high quality loudspeaker systems which are designed and developed by the DAP Audio R&D department in the Netherlands. Special attention is given to the transducers, high drivers, horn flares and passive crossovers, which will result in a wide coverage of the audience, optimal off-axis response (no mid dip) and optimal throw. The result is higher power handling capacity, high efficiency and a very wide and smooth frequency response at any listening position. All the transducers have optimized Thiele Small Parameters and the high drivers have a very high efficiency which gives the freedom of more power handling capacity, usage of high frequency correction and a transparent sound at the highest frequencies.

DAP X-Series

smooth frequency response at any listening position. All the transducers have optimized Thiele Small Parameters and the high drivers have a very high efficiency which gives the freedom of more power handling capacity, usage of high frequency correction and a transparent sound at the highest frequencies.

DAP X-Series components Premium grade Crossover

126 01_02_DAP_Speakers_10_temp2011.indd 126

High Qualtity HF-drivers

HF-horn

High Grade Series

LF-driver

[Speakers] 04.03.11 22:18

High Grade Series Spe peak aker ak erss er

X-10

D3290

10”/1,75” Full Range Cabinet

Compact 2-way cabinet with extremely brilliant and clear sound quality. • High power handling capacity (250 Watt), high efficiency, optimal throw, smooth frequency response and optimal off-axis response. • Highly advanced 18/18 dB/octave passive crossover sections with passive high frequency limiter and Constant Directivity correction. • Very high efficient 1” exit 1.75” voice coil high drivers with titanium dome with a very smooth frequency response up-to 16.000 Hz at -3 dB. • Optimal off-axis response of 60° at any frequency for optimal tone balance at any listener position. • Optimised gain before feedback. • Black spray painted 15 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

X-12

D3291

12”/1,75” Full Range Cabinet

Compact 2-way cabinet with extremely brilliant and clear sound quality. • High power handling capacity, high efficiency, optimal throw, smooth frequency response and optimal off-axis response. • Highly advanced 18/18 dB/octave passive crossover sections with passive high frequency limiter and Constant Directivity correction. • Very high efficient 1” exit 1.75” voice coil high drivers with titanium dome with a very smooth frequency response up-to 16.000 Hz at -3 dB. • Optimal off-axis response of 60° at any frequency for optimal tone balance at any listener position. • Optimised gain before feedback. • Black spray painted 18 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

X-12T D3292

X-15

12”/2” Top Cabinet

D3293

Compact 2-way cabinet with extremely brilliant and clear sound quality. • High power handling capacity, high efficiency, optimal throw, smooth frequency response and optimal off-axis response. • Highly advanced 18/18 dB/octave passive crossover sections with passive high frequency limiter and Constant Directivity correction. • Very high efficient 1” exit 2” voice coil high drivers with titanium dome with a very smooth frequency response up-to 16.000 Hz at -3 dB. • Optimal off-axis response of 60° at any frequency for optimal tone balance at any listener position. • Optimised gain before feedback. • Black spray painted 18 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

15”/2” Full Range Cabinet

Compact 2-way cabinet with extremely brilliant and clear sound quality. • High power handling capacity, high efficiency, optimal throw, smooth frequency response and optimal off-axis response. • Highly advanced 18/18 dB/octave passive crossover sections with passive high frequency limiter and Constant Directivity correction. • Very high efficient 1” exit 2” voice coil high drivers with titanium dome with a very smooth frequency response up-to 16.000 Hz at -3 dB. • Optimal off-axis response of 60° at any frequency for optimal tone balance at any listener position. • Optimised gain before feedback. • Black spray painted 18 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

8 Ohm 250 Watt Continuous 500 Watt Program 1000 Watt Peak Freq. Response (-3 dB): 53 – 16.000 Hz Freq. Range (-10 dB): 64 – 20.000 Hz Crossover Frequency: 3300 Hz, 18 dB/Oct Sensitivity (Full Space): 96 dB / W / m Peak SPL at 1m (Theoretical):126 dB Nominal Dispersion (HxV): 90° x 60° Dimensions (LxWxH): 310 x 310 x 610 mm Net Weight: 16,5 kg

8 Ohm 350 Watt Continuous 700 Watt Program 1400 Watt Peak Freq. Response (-3 dB): 60 – 16.000 Hz Freq. Range (-10 dB): 48 – 20.000 Hz Crossover Frequency: 2000 Hz, 18 dB/Oct Sensitivity (Full Space): 97 dB / W / m Peak SPL at 1m (Theoretical):128.5 dB Nominal Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 410 x 410 x 710 mm Net Weight: 25 kg

8 Ohm 450 Watt Continuous 900 Watt Program 1800 Watt Peak Freq. Response (-3 dB): 80 – 16.000 Hz Freq. Range (-10 dB): 60 – 20.000 Hz Crossover Frequency: 2000 Hz, 18 dB/Oct Sensitivity (Full Space): 99 dB/W/m Peak SPL at 1m (Theoretical):131.5 dB Nominal Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 375 x 370 x 710 mm Net Weight: 26,5 kg

8 Ohm 500 Watt Continuous 1000 Watt Program 2000 Watt Peak Freq. Response (-3 dB): 55 – 16.000 Hz Freq. Range (-10 dB): 45 – 20.000 Hz Crossover Frequency: 1700 Hz, 18 dB/Oct Sensitivity (Full Space): 99 dB/W/m Peak SPL at 1m (Theoretical):132 dB Nominal Dispersion (HxV): 75° x 50° Dimensions (LxWxH): 480 x 480 x 810 mm Net Weight: 35 kg

Special features: • Briljant and natural sound quality • Optimised gain before feedback • Advanced 18dB crossover • Road proof 15mm plywood cabinet

Special features: • Briljant and natural sound quality • Optimised gain before feedback • Advanced 18dB crossover • Road proof 18mm plywood cabinet

Special features: • Briljant and natural sound quality • Long/Medium throw switch • Advanced 18dB crossover • Road proof 18mm plywood cabinet

16,5

310 310 610

10”

8 Ohm

410 410 710

12”

8 Ohm

26,5

High Grade Series 01_02_DAP_Speakers_10_temp2011.indd 127

375 370 710

12”

[Speakers]

8 Ohm

480 480 810

15”

8 Ohm

127 04.03.11 22:18

High Grade Series Spe peak aker ak erss er

X-12M D3297

X-15B D3294

15” Subwoofer

X-15HL

X18B

Compact 15” horn loaded subwoofer design for a very high efficiency and still deep bass response until 38 Hz. Ideal for building or extending actively channelled PA systems • Very high power handling capacity of 600 Watt RMS. • Special 15” transducer with a 4” voice coil and a long cone excursion for minimal distortion at full power. • Advanced transducer cooling system for higher power handling capacity. • Black spray painted 18 mm plywood cabinet (13 layers).

Special 18” subwoofer with a 4” voice coil and a long cone excursion for minimal distortion at full power and high efficiency and high power handling capacity (600 Watt). • Large wooden vent for minimal noise. • Optimal Q-load for a very smooth and deep frequency response. • Switchable active/passive crossover usage. (No disassembly of the passive crossover needed) • Phase reverse switch for the satellite system for maximum sound pressure with less power. • Advanced transducer cooling system for higher power handling capacity. • Black spray painted 18 mm plywood cabinet (13 layers).

D3296

Special 15” subwoofer with a 3” voice coil and a long cone excursion for minimal distortion at full power. • High efficiency and high power handling capacity (400 Watt). • Large wooden vent for minimal noise. • Optimal Q-load for a very smooth and deep frequency response. • Switchable active/passive crossover usage. (No disassembly of the passive crossover needed) • Phase reverse switch for the satellite system for maximum sound pressure with less power. • Advanced transducer cooling system for higher power handling capacity. • Black spray painted 18 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

15” Hornloaded Subwoofer

D3295

18” Subwoofer

8 Ohm 400 Watt Continuous 800 Watt Program 1600 Watt Peak Freq. Response (-3 dB): 42 – 160 Hz Freq. Range (-10 dB): 35 – 200 Hz Crossover Frequency Low: 160 Hz, 12 dB/Oct Crossover Frequency High: 160 Hz, 6 dB/Oct Sensitivity (Half Space): 103 dB/W/m Peak SPL at 1m (Theoretical):135 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 500 x 600 x 710 mm Net Weight: 36 kg

Technical Information Nominal Impedance: Power Handling:

8 Ohm 600 Watt Continuous 1200 Watt Program 2400 Watt Peak Freq. Response (-3 dB): 42 – 130 Hz Freq. Range (-10 dB): 38 – 130 Hz Sensitivity (Half Space): 106 dB/W/m Peak SPL at 1m (Theoretical):139.8 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 600 x 600 x 810 mm Net Weight: 60 kg

Technical Information 18” passive vented subwoofer Active/Passive Filter Switch Woofer Normal/Inverted Switch High Out Woofer: ER-1899L , 8 Ohm, 100 mm Voice Coil Nominal Impedance: 8 Ohm Power Handling: 600 Watt Continuous 1200 Watt Program 2400 Watt Peak Freq. Response (-3 dB): 38 – 160 Hz Freq. Range (-10 dB): 32 – 200 Hz Crossover Frequency Low: 160 Hz, 12 dB/Oct Crossover Frequency High: 160 Hz, 6 dB/Oct Sensitivity (Half Space): 104 dB/W/m Peak SPL at 1m (Theoretical): 137.8 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 600 x 600 x 760 mm Net Weight: 49 kg

Special features: • Advanced transducer cooling system enables high power handling • Cross-over bypass switch • High pass filtered output with phase switch • Only one amplifier needed for a complete set up with 4 subs and 2 tops • Road proof 18mm plywood cabinet

Special features: Advanced transducer cooling system enables high power handling • Long excursion subwoofer • Road proof 18mm plywood cabinet

500 600 710

15”

8 Ohm

128 01_02_DAP_Speakers_10_temp2011.indd 128

600 600 810

15”

8 Ohm

High Grade Series

600 600 760

18”

8 Ohm

Floor Monitor, 350W

Floor monitor for pure sound quality with low feedback tendency. • High power handling capacity (350 Watt), high efficiency, optimal throw, smooth frequency response and optimal off-axis response. • Highly advanced 12/12 dB/octave passive crossover sections with passive high frequency limiter and optimal phase response. • Advanced transducer cooling system for higher power handling capacity. • Very high efficient 1” exit 1.75” voice coil high drivers with a very smooth frequency response up-to 16.000 Hz at -3 dB. • Special ribbon cone for a smooth mid-frequency response. • Optimised gain before feedback. • Black spray painted 18 mm plywood cabinet (13 layers). Technical Information Nominal Impedance: Power Handling:

8 Ohm 350 Watt Continuous 700 Watt Program 1400 Watt Peak Freq. Response (-3 dB): 60 – 16.000 Hz Freq. Range (-10 dB): 48 – 20.000 Hz Crossover Frequency: 2000 Hz, 12 dB/Oct Sensitivity (Full Space): 97 dB/W/m Peak SPL at 1m (Theoretical):128.5 dB Nominal Dispersion (HxV): 90° x 60° Dimensions (LxWxH): 665 x 375 x 390 mm Net Weight: 23 kg

Special features: • Optimised gain before feedback • Advanced 18dB crossover • Road proof 18mm plywood cabinet

665 375 390

12”

8 Ohm

[Speakers] 04.03.11 22:18

High Grade Series Spe peak aker ak erss er Features:

X-Series Active

DAP audio has set the new high quality sound standard with the X-series speakers. Now the whole X-series speaker range have also become active with the addition of the new light weight amplifier systems and switch mode power supply (SMPS). The benefits are: • Easy handling and setup. No power amplifiers needed. • Build in light weight amplifier module of only 3.5 kg. • Flexible use and expanding capabilities. • Only slightly larger cabinets, compared with the passive versions.

• Build in Class-D amplifier for the low speaker to get a very high efficiency, up to 90% • Build in Class-AB amplifier for the high driver to get an optimal sound quality. • Multiband limiting for optimal sound quality at any level and optimal protection. • User adjustable crossover frequency setting from 60 – 250 Hz. • Build in subsonic filters for optimal speaker protection. • Loudness switch for automatically extended low frequencies performance, especially in case of small events or for background music. • Auxiliary output for use with amplifiers and passive speakers, or use with other kinds of active speaker systems. • Phase switch at the subwoofers. • Ground lift switch to eliminate hum in ground loop situations.

The Active X-series Loudspeakers have the same high quality components as his passive brothers. The internal processing and the two amplifiers build in the 2-way speaker cabinets makes it also possible to get an optimal and smooth frequency response.

X-10A D3251

1,75”

Active Fullrange Speaker 10”,

X-12A D3252

1,75”

Active Fullrange Speaker 12”,

Special features: • Neutrik Powercon input & link output • Engineered in the Netherlands • Built-in Class-D amplifier • Output with active low pass filter

X-12TA D3259

Active Mid/High Speaker 12”, 2”

X-15A D3253

Active Fullrange Speaker 15”, 2”

Technical Information 10/1 Active Vented PA Speaker System Loudness Switch Ground Lift Switch Auxiliary XLR Low Out Build In Subsonic Filter Multiband Limiters

Technical Information 12/1 Active Vented PA Speaker System Loudness Switch Ground Lift Switch Auxiliary XLR Low Out Built-in Subsonic Filter Multiband Limiters

Technical Information 15/1 Active Vented PA Speaker System Loudness Switch Ground Lift Switch Auxiliary XLR Low Out Built-in Subsonic Filter Multiband Limiters

Amplifier Output Power Low: Amplifier Output Power High: Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency: Adjustable Crossover Freq:

200 Watt RMS 100 Watt RMS 75 – 17.000 Hz 60 – 22.000 Hz 2200 Hz, 24 dB/Oct 60 – 250 Hz, 24 dB/Oct Sensitivity (Full Space): 95 dB / W / m Max. SPL at 1m (Theoretical): 119.8 dB Nominal Dispersion (HxV): 90° x 60° Dimensions (LxWxH): 310 x 380 x 600 mm Net Weight: 20,5 kg

200 Watt RMS 100 Watt RMS 60 – 16.000 Hz 42 – 20.000 Hz 2000 Hz, 24 dB/Oct 60 – 250 Hz, 24 dB/Oct Sensitivity (Full Space): 97 dB / W / m Max. SPL at 1m (Theoretical): 121.8 dB Nominal Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 410 x 480 x 700 mm Net Weight: 28,4 kg

400 Watt RMS 100 Watt RMS 70 – 16.000 Hz 60 – 20.000 Hz 1900 Hz, 24 dB/Oct 60 – 250 Hz, 24 dB/Oct Sensitivity (Full Space): 99 dB / W / m Max. SPL at 1m (Theoretical): 126 dB Nominal Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 370 x 400 x 700 mm Net Weight: 28,5 kg

High Grade Series 01_02_DAP_Speakers_10_temp2011.indd 129

[Speakers]

400 Watt RMS 100 Watt RMS 42 – 16.000 Hz 36 – 20.000 Hz 1700 Hz, 24 dB/Oct 60 – 250 Hz, 24 dB/Oct Sensitivity (Full Space): 99 dB / W / m Max. SPL at 1m (Theoretical): 126 dB Nominal Dispersion (HxV): 90° x 50° Dimensions (LxWxH): 480 x 570 x 800 mm Net Weight: 38,5 kg

129 04.03.11 22:18

High Grade Series Spe peak aker ak erss er Special features: • Neutrik Powercon input & link output • Engineered in the Netherlands • Built-in Class-D amplifier • Output with active high pass filter

X-15BA D3254

Active Sub/Bass Speaker 15”

• Lightweight switched mode power supply. • Separate amplifiers for mid and high speakers. • Active 2 way crossover network. • User adjustable crossover frequency 60Hz-250Hz/24dB.Oct. • Multiband limiter circuit for optimal tone balance and sound pressure level. • Loudness switch for enhanced low frequency response. • Groundloop switch. • Extra low frequency balanced output.

X-15HLA

Active Hornloaded Sub/Bass Speaker 15” D3256

• Lightweight amplifier and power supply • Fully 2 way active crossover inside • User variable crossover frequency from 60 – 250 Hz, 24 dB/oct • Auxilary High Out for other active full range speaker systems • Built-in Subsonic filter to prevent amplifier power waste and protection of the speaker • Clip Limiter • Loudness switch for enhanced low frequency response • Phase switch • Groundloop switch

X-18BA

X-12MA

1,75”

D3255

Active Sub/Bass Speaker 18”

D3258

Active Monitor Speaker 12”,

• Lightweight amplifier and power supply • Two amplifiers for low/mid and high speaker • Fully 2/3 way active crossover inside • User variable crossover frequency from 60 – 250 Hz, 24 dB/oct • Auxilary Low Out for other active subwoofers or amplifiers with passive subwoofers. No external crossover needed • Built-in Subsonic filter to prevent amplifier power waste and protection of the speaker • Multiband limiter circuit for optimal tone balance at any sound pressure level • Loudness switch for enhanced low frequency response. No subwoofer need for small gigs • Groundloop switch

Technical Information 15” Active Vented PA Subwoofer Loudness Switch Ground Lift Switch Auxiliary XLR High Out Built-in Subsonic Filter Built-in Soft Limiters

Technical Information 15” Active Horn Loaded PA Subwoofer Loudness Switch Ground Lift Switch Auxiliary XLR High Out Built-in Subsonic Filter Built-in Soft Limiters

Technical Information 18” Active Vented PA Subwoofer Loudness Switch Ground Lift Switch Auxiliary XLR High Out Built-in Subsonic Filter Built-in Soft Limiters

Technical Information 12/1 Active Vented PA Monitor Speaker System Loudness Switch Ground Lift Switch Auxiliary XLR Low Out Built-in Subsonic Filter Multiband Limiters

Amplifier Output Power Low: Freq. Response (-3, -6 dB): Freq. Range (-10 dB): Adjustable Crossover Freq:

Amplifier Output Power Low: Amplifier Output Power High: Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency: Adjustable Crossover Freq:

400 Watt RMS 38 – 250 Hz 32 – 300 Hz 60 – 250 Hz, 24 dB/Oct Sensitivity (Half Space): 103 dB / W / m Max. SPL at 1m (Theoretical): 129 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 500 x 690 x 700 mm Net Weight: 39.5 kg

130 01_02_DAP_Speakers_10_temp2011.indd 130

600 Watt RMS 38 – 250 Hz 32 – 300 Hz 60 – 250 Hz, 24 dB/Oct Sensitivity (Half Space): 106 dB / W / m Max. SPL at 1m (Theoretical): 133.8 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 600 x 810 x 790 mm Net Weight: 70 kg

600 Watt RMS 35 – 250 Hz 30 – 300 Hz 60 – 250 Hz, 24 dB/Oct Sensitivity (Half Space): 104 dB / W / m Max. SPL at 1m (Theoretical): 131.8 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 600 x 690 x 750 mm Net Weight: 50,5 kg

High Grade Series

200 Watt RMS 100 Watt RMS 60 – 16.000 Hz 42 – 20.000 Hz 2000 Hz, 24 dB/Oct 60 – 250 Hz, 24 dB/Oct Sensitivity (Full Space): 97 dB / W / m Max. SPL at 1m (Theoretical): 121.8 dB Nominal Dispersion (HxV): 90° x 60° Dimensions (LxWxH): 680 x 400 x 380 mm Net Weight: 26,4 kg

[Speakers] 04.03.11 22:18

High Grade Series Spe peak aker ak erss er Protection Covers for X-Series X-series protection covers are high quality covers with openings for the handles, connection plate and speaker stand adapter. It is made of durable padded fabric to ensure good protection for your speakers during transport. It also has a handy transparent label holder. The front of this cover has a zipper so it is possible to keep the speaker in the cover during performance if necessary.

Special features: • Durable padded fabric • Transparant label holder • Handy openings for connections and stand adapter • Possibility to keep speaker inside cover during performance

NEW PRODUCT

Protection cover for X-10 D3320

NEW PRODUCT

Cover for X-15B D3324

NEW PRODUCT

Multifunctional Cover for X-12 D3321

NEW PRODUCT

Cover for X-15HL D3325

NEW PRODUCT

Multifunctional Cover for X-12T D3322

D3323

NEW PRODUCT

Cover for X-18B D3326

High Grade Series 01_02_DAP_Speakers_10_temp2011.indd 131

NEW PRODUCT

Multifunctional Cover for X-15

[Speakers]

131 04.03.11 22:18

High Grade Series Spe peak aker ak erss er

8” 6,5”

12” Special features: • Compact • HiFi Sound Quality • Adjustable subwoofer level • Fase invert switch • Including speaker cables

Special features: • Compact & Powerfull • Improved Sound Quality • Adjustable subwoofer level • Fase invert switch • Including speaker cables

15”

Club Mate Series • High Power, Long Excursion 12 and 15 inch subwoofer speaker units. • Special mid speaker unit with a very high efficiency. • Special High Drivers and Elliptical Wave Guide for frequencies up to 20 KHz. • All amplifiers and electronics are build in the subwoofer cabinet. • Build in dynamic compressor and limiter circuits for optimal protection and low distortion • Build in Subsonic Filter for optimal subwoofer protection. • Build in High Driver Protection.

Club Mate 12 D3232

Club Mate 15

12” Active Speaker Set

Technical Information Subwoofer: 12” compact vented active PA subwoofer Amplifier Output Low:

350 Watt RMS in 8 Ohm Amplifier Output High: 2x 120 Watt RMS in 8 Ohm Freq. Response (-3 dB): 50 – 125 Hz Crossover Freq.: 125 Hz, 24 dB/ Oct BW Input Sensitivity: 0 dBu, 775 mV Efficiency (Half Space): 100 dB / W / m Max. SPL at 1 m (Theoret.): 125.4 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (WxHxD): 452 x 515 x 603 mm Net Weight: 36 kg Satellites: 6.5/1” passive vented PA satellite speaker system . Freq. Response (-3 dB): 125 – 20,000 Hz Crossover Freq.: 2700 Hz, 12 dB/ Oct LR

132 01_02_DAP_Speakers_10_temp2011.indd 132

• Excellent Stereo Image. • 13-layers plywood for the subwoofer, MDF for the satellites for optimal suppression of internal resonances. • Special High Driver with Neodymium magnet and Metalized Poly Carbonate Dome for a very smooth Frequency Response up to 20 kHz.

D3233

Efficiency (Full Space):

95 dB / W / m

Max. SPL at 1 m (Theoret.): Nominal Dispersion (HxV): Dimensions (WxHxD): Net Weight:

115.8 dB 90° x 60° 240 x 340 x 245 mm 9 kg

Optional:

Speaker stands (D8401), 6 m Speakon cables (FS046, FS176, or FS186)

15” Active Speaker Set

Technical Information Subwoofer: 15” compact vented active PA Subwoofer Amplifier Output Low:

400 Watt RMS in 8 Ohm Amplifier Output High: 2x 150 Watt RMS in 8 Ohm Freq. Response (-3 dB): 44 – 125 Hz Crossover Freq.: 125 Hz, 24 dB/ Oct BW Input Sensitivity: 0 dBu, 775 mV Efficiency (Half Space): 103 dB / W / m Max. SPL at 1 m (Theoret.): 129 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (WxHxD): 503 x 605 x 705mm Net Weight: 46 kg

Max. SPL at 1 m (Theoret.): Nominal Dispersion (HxV): Dimensions (WxHxD): Net Weight:

116.8 dB 90° x 60° 264 x 432 x 253mm 9 kg

Optional:

Speaker stands (D8401), 6 m Speakon cables (FS046, FS176, or FS186)

Satellites: 8/1” passive vented PA Satellite speaker system Freq. Response (-3 dB): Crossover Freq.: Efficiency (Full Space):

High Grade Series

125 – 20,000 Hz 2700 Hz, 12 dB/Oct LR 95 dB / W / m

[Speakers] 04.03.11 22:19

High Grade Series Spe peak aker ak erss er

• Engineered in EU

NEW PRODUCT

Castorboard for Club-Mate 12

Castorboard for Club-Mate 15

Make your transport of the clubmate 12 easy with this castor board. Of course you can use it for many other transportations but it will perfectly fit the 12” clubmate sub.

Make your transport of the clubmate 15 easy with this castor board. Of course you can use it for many other transportations but it will perfectly fit the 15” clubmate sub.

D3234

Technical Information Measurements: 150 x 600 x 450 mm (HxWxD) Weight: 7.00Kg Wheels: Blue wheels 100mm (2 swivel, 2 including brake)

High Grade Series 01_02_DAP_Speakers_10_temp2011.indd 133

[Speakers]

D3235

Technical Information Measurements: 150 x 700 x 500 mm (HxWxD) Weight: 7.50Kg Wheels: Blue wheels 100mm (2 swivel, 2 including brake)

133 04.03.11 22:19

High Grade Series Spe peak aker ak erss er

Special features: • Plug & Play’ complete active DJ set • HiFi Sound Quality • including Transport covers • Amplifier unit in bascabinet • Adjustable subwoofer level

SoundMate Active 2 MK-II D3221

Complete Ready-to-Use set

Easy transportable high quality sound system for DJ’s and bands. Bass and satellite amplifiers are built into the subwoofer. Specially designed high power 15” subwoofer system with 3” voice coil for handling frequencies down to 38 Hz. Light weight satellite cabinets with 10” high efficiency mid speaker with 2” voice coil. 1” exit, 1.75” voice coil high driver mounted on a natural constant directivity horn. Cabinets 18 mm plywood (12 layers). colour Black.

Technical Information Subwoofer: 15” active vented PA subwoofer Built-in Limiter circuits Built-in Loudness circuits Amplifier Output Power Low: 400 Watt RMS Amplifier Output Power High: 200 Watt RMS in 8 Ohm Freq. Resp. (-3 dB, -6 dB): 38 – 160 Hz Freq. Range (-10 dB): 32 – 200 Hz Crossover Frequency: 160 Hz, 24 dB/oct Sensitivity (Half Space): 103 dB / W / m Max. SPL at 1m (Theoret.): 129 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 840 x 710 x 500 mm Net Weight: 55 kg

10/1 passive vented PA satellite speaker system Nominal Impedance: Freq. Resp. (-6 dB, -3 dB): Freq. Range (-10 dB): Crossover Frequency: Sensitivity (Full Space): Max. SPL at 1m (Theoret.): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

8 Ohm 160 – 16,000 Hz 125 – 20,000 Hz 3300 Hz, 18 dB/oct 97 dB / W / m 120 dB 90° x 60° 300 x 610 x 300 mm 15,5 kg

Satellite:

• Incl. 3 transport covers • 2 Speaker Cables • 2 Distance Tubes • 8 Castor Wheels

134 01_02_DAP_Speakers_10_temp2011.indd 134

High Grade Series

[Speakers] 04.03.11 22:19

High Grade Series Spe peak aker ak erss er

Special features: • Plug & Play’ complete active Live set • High SPL output • including Transport covers • Every cabinet has its own amplifier

SoundMate Active 3 MK-II D3222

Complete Ready-to-Use set

Easy transportable high power and high quality sound system for DJ’s and bands. Easy stackable for maximum stability. Each cabinet has its own built-in amplifier, processor, limiter and crossover section. Specially designed subwoofer system with 15” high power subwoofer with 3” voice coil for handling frequencies down to 38 Hz. 12” high efficiency mid speaker with 3” voice coil and high driver with 1” exit, 2” voice coil mounted on a constant directivity horn. Cabinets 18 mm plywood (12 layers). colour Black. • Incl. transport covers • 16 Castor Wheels The satellite: The Soundmate 3 satellite is designed to produce a full spectrum of sound. The satellite is equipped with a 12” LF loudspeaker and 1” HF driver with a horn with a dispersion of 60°x60°. The built-in amplifiers deliver 600W of pure sound.

Technical Information Subwoofer: 15” active vented PA subwoofer Built-in Limiter circuits Built-in Loudness circuits Amplifier Output Power: 400 Watt RMS Freq. Resp. (-3 dB, -6 dB): 38 – 160 Hz Freq. Range (-10 dB): 32 – 200 Hz Crossover Frequency: 160 Hz, 24 dB/oct Sensitivity (Half Space): 103 dB / W / m Max. SPL at 1 m (Theoret.): 129 dB Nominal Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 840 x 710 x 500 mm Net Weight: 55 kg

Freq. Resp. (-6 dB, -3 dB): Freq. Range (-10 dB): Crossover Frequency: Sensitivity (Full Space): Max. SPL at 1 m (Theoret.): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

160–16,000 Hz 125–20,000 Hz 2000 Hz, 18 dB/oct 99 dB / W / m 125 dB 60° x 40° 480 x 710 x 370 mm 37 kg

Satellite: 12/1 passive vented PA satellite speaker system Built-in Limiter circuits Amplifier Output Power: 400 Watt RMS in 8 Ohm

The subwoofer: Feel the bass with this 15” basscabinet. The cabinet is powered through a powerful 600W amplifier. The castors makes the unit easy to move and thanks to this feature it is a real roadproof system and is it even suitable to carry a satellite cabinet.

High Grade Series 01_02_DAP_Speakers_10_temp2011.indd 135

[Speakers]

135 04.03.11 22:19

Touring Series Spe peak aker ak erss er Special features: • Extreme high power handling • Engineered in the Netherlands • Advanced High-driver protection circuit • Switches to disable x-over and enable bi-amping • Interlock system for transport trolley and safe stacking

LT-Series Passive

DAP audio is proud to introduce the new DAP LT Speaker Series. These speakers are developed in the Netherlands to meet the latest European Sound Standards. These LT Series Speakers are made for almost any kind of events. Special attention is given at the easy handling of these speaker systems as well as less use of equalization. The benefits are: • Long Linear Excursion Subwoofer Speakers with Multiple Layer Voice Coils for very high power handling, less power compression and also extended low frequency response. • Very High Efficiency • Extreme High Power Handling • A 1.5” Hornflare with added phase plug for a higher and smoother frequency response. • A 1.5” High Driver with a 3” Voice Coil and a Poly Carbonate Dome • Low Power Compression • ‘d Apollito configuration for a very flat frequency response • Optimal phase response at the higher frequencies • Optimal Off-axis response

2x18”

2x15”

Al the low speakers are made with Aluminum Die Cast Frames and have optimized Thiele Small Parameters to get the highest efficiency and power handling possible.

2x12”

Features: • New style grille • Highly Advanced High Driver Limiter. No switch off of the High Driver • Up to 16 handgrips for easy handling • Highly Advanced Passive Crossover Sections build in.

LT-212 D3480

D3482 D3481

2 x 12” Long Throw Speaker

• High performance fullrange enclosure • 2 high power 12 inch drivers • 3 inch compression driver • Strong metal handles • Multiple flying system • Interlock system for safe ground stacking • Ideal in combination with the X-218B and X-18HL Technical Information Double 12/1.5 Vented d’Appollito PA Speaker System Active / Passive Filter Switch 6 Metal Handgrips Nominal Impedance: 4 Ohm Power Handling: 900 Watt Continuous 1800 Watt Program 3600 Watt Peak Freq. Resp. (-3 dB): 66 – 15.000 Hz Freq. Range (-10 dB): 55 – 18.000 Hz Crossover Freq.: 1700 Hz, 18 dB/Oct Sensitivity (Full Space): 101 dB / W / m

D34 D3480

490 490 1090

Peak SPL at 1 m: Nominal Disp. (HxV): Dimensions (LxWxH): Net Weight:

Transport Trolley D3490

2x12”

4 Ohm

900W

LT-215

LT-218B

• High performance fullrange enclosure • 2 high power 15 inch drivers • 3 inch compression driver • Strong metal handles • Multiple flying system • Interlock system for safe ground stacking • Ideal in combination with the X-218B and X-18HL

• High performance sub/bass enclosure • 2 high power 18 inch drivers • Strong metal handles • Interlock system for safe ground stacking • Ideal in combination with the LT-212B and LT-215 • Standadapter with 22 mm screw

D3481

2 x 15” Long Throw Speaker

Technical Information Double 15/1.5 Vented d’Appollito PA Speaker System Active / Passive Filter Switch 6 Metal Handgrips Nominal Impedance: Power Handling: Freq. Resp. (-3 dB): Freq. Range (-10 dB): Crossover Freq.:

510 490 1230

4 Ohm 1000 Watt Continuous 2000 Watt Program 4000 Watt Peak 56 – 15.000 Hz 42 – 18.000 Hz 1700 Hz, 18 dB/Oct

D3482

Sensitivity (Full Space): Peak SPL at 1 m: Nominal Disp. (HxV): Dimensions (LxWxH): Net Weight:

102 dB / W / m 138 dB (Theoretical) 60° x 40° 510 x 490 x 1230 mm 61 kg

2x15”

4 Ohm

136 01_02_DAP_Speakers_10_temp2011.indd 136

1000W

For LT-215

For LT-212

2 x 18” Bass Speaker

Technical Information Double 18” Passive Vented PA Subwoofer 6 Metal Handgrips 3x M20 Stand Bases Woofer: ER-1899L-C, 8 Ohm, 100 mm 4L Voice Coil Nominal Impedance: 4 Ohm Power Handling: 1600 Watt Continuous 3200 Watt Program 6400 Watt Peak

Transport Trolley D3491

136.5 dB (Theoretical) 60° x 40° 490 x 490 x 1090 mm 50 kg

Touring Series

650 650 1220

Freq. Resp. (-3 dB): Freq. Range (-10 dB): Sensitivity (Half Space): Peak SPL at 1 m: Nominal Disp. (HxV): Dimensions (LxWxH): Net Weight:

32 – 125 Hz 26 – 245 Hz 106 dB / W / m 144 dB (Theoretical) 360° x 180° 650 x 650 x 1220 mm 81 kg

Transport Trolley D3492

2x18”

4 Ohm

1600W

For LT-218B

[Speakers] 04.03.11 22:19

Touring Series Spe peak aker ak erss er LT-15HL D3483

15” Horn Loaded Bass Speaker

• High performance horn loaded Bass speaker • 1 high power 15 inch driver • Strong metal handles • Interlock system for safe ground stacking • Standadapter with 22 mm screw Technical Information 15” Passive Horn Loaded PA Subwoofer 4 Metal Handgrips 1x M20 Stand Base Nominal Impedance: 8 Ohm Power Handling: 600 Watt Continuous 1200 Watt Program 2400 Watt Peak Freq. Resp. (-3 dB): 42 – 130 Hz Freq. Range (-10 dB): 38 – 130 Hz

600 600 810

Sensitivity (Half Space): Peak SPL at 1 m: Nominal Disp. (HxV): Dimensions (LxWxH): Net Weight:

106 dB / W / m 139.8 dB (Theoretical) 360° x 180° 600 x 600 x 810 mm 60 kg

Transport Trolley D3493

15”

8 Ohm

600W

For LT-15HL

1x15” Special features: • Extreme high power handling • Engineered in the Netherlands • Interlock system for transport trolley and safe stacking • Most allround compact HL Sub • Ergonomic placed handgrips for easy handling

LT-18HL D3484

18” Horn Loaded Bass Speaker

• High performance horn loaded Sub/Bass enclosure • 1 high power 18 inch driver • Strong metal handles • Interlock system for safe ground stacking • Standadapter with 22 mm screw

1x18” Technical Information 18” Passive Horn Loaded PA Subwoofer 16 Metal Handgrips 1x M20 Stand Base Nominal Impedance: 8 Ohm Power Handling: 800 Watt Continuous 1600 Watt Program 3200 Watt Peak Freq. Response (-3 dB): 38 – 400 Hz Freq. Range (-10 dB): 28 – 800 Hz

640 770 1240

Sensitivity (Half Space): 108 dB / W / m Peak SPL at 1 m (Theoretical): 143 dB Nominal Dispersion (HxV):360° x 180° Dimensions (LxWxH): 640 x 770 x 1240mm Net Weight: 85 kg

Special features: • Extreme high power handling • Engineered in the Netherlands • Interlock system for transport trolley and safe stacking • Very high Sound Pressure HL Sub • Ergonomic placed handgrips for easy handling

Transport Trolley D3494

18”

8 Ohm

800W

For LT-18HL

LT-21HL D3485

21” Horn Loaded Bass Speaker

• High performance horn loaded • Sub/Bass enclosure • 1 high power 21 inch driver • Strong metal handles • Interlock system for safe ground stacking • Standadapter with 22 mm screw

1x21”

Technical Information 21” Passive Horn Loaded PA Subwoofer 16 Metal Handgrips 1 x M20 Stand Base Nominal Impedance: 8 Ohm Power Handling: 1000 Watt Continuous 2000 Watt Program 4000 Watt Peak Freq. Response (-3 dB): 30 – 130 Hz Freq. Range (-10 dB): 22 – 130 Hz

640 810 1330

Sensitivity (Half Space): 108 dB / W / m Peak SPL at 1 m (Theoretical): 144 dB Nominal Dispersion (HxV):360° x 180° Dimensions (LxWxH): 640 x 810 x 1330mm Net Weight: 96 kg

Special features: • Extreme high power handling • Engineered in the Netherlands • Interlock system for transport trolley and safe stacking • Ultra low infra Subwoofer • Ergonomic placed handgrips for easy handling

Transport Trolley D3495

21”

8 Ohm

1000W

For LT-21HL

Touring Series 01_02_DAP_Speakers_10_temp2011.indd 137

[Speakers]

137 04.03.11 22:19

Touring Series Spe peak aker ak erss er Special features: • Bang & Olufson Amp with DSP presets • Engineered in the Netherlands • Neutrik Powerkon In + Out • Build in Active Crossover with low pass output • Configurable dynamics by RS-485 interface

LT-212A • • • •

Engineered in EU Built-in DSP Bang & Olufsen / ICE-Power Amplifier inside

Active Speaker with processing D3473

• 12/1.5” Active 2-way d’Appolito Speaker System • 16 presets directly available • 6 Metal Handgrips Technical Information Amplifier Module Low: B&O ICEpower 1000ASP Amplifier Module High: B&O ICEpower 500A Amplifier Output Low: 1000 Watt RMS in 4 Ohm Amplifier Output High: 500 Watt RMS in 4 Ohm Damping factor at 100 Hz: > 2000 in 8 Ohm Input Sensitivity: 0 dBu DSP: Marani Dig Amp DSP Freq. Response (-3 dB): 66 – 15,000 Hz

470 470 1090

12”/1,5”

Freq. Range (-10 dB): 55 – 18,000 Hz Sensitivity (Full Space): 101 dB / W / m Max. SPL at 1 m (Theoret.): 132 dB Nom. Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 470 x 470 x 1090 mm Net Weight: 52 kg

1500W

LT-215A

Active Speaker with processing D3474

• 15/1.5” Active 2-way d’Appolito Speaker System • 16 presets directly available • 6 Metal Handgrips

• • • •

138 01_02_DAP_Speakers_10_temp2011.indd 138

Engineered in EU Built-in DSP Bang & Olufsen / ICE-Power Amplifier inside

Technical Information Amplifier Module Low: B&O ICE power1000ASP Amplifier Module High: B&O ICE power500A Amplifier Output Low: 1000 Watt RMS in 4 Ohm Amplifier Output High: 500 Watt RMS in 4 Ohm Damping factor at 100 Hz: > 2000 in 8 Ohm Input Sensitivity: 0 dBu DSP: Marani Dig Amp DSP Freq. Response (-3 dB): 56 – 15,000 Hz

Touring Series

490 510 1230

15”/1,5”

Freq. Range (-10 dB): 42 – 18,000 Hz Sensitivity (Full Space): 102 dB / W / m Max. SPL at 1 m (Theoret.):133 dB Nom. Dispersion (HxV): 60° x 40° Dimensions (LxWxH): 490 x 510 x 1230 mm Net Weight: 63 kg

1500W

[Speakers] 04.03.11 22:19

Touring Series Spe peak aker ak erss er LT-218BA

Active Speaker with processing D3477

• Double 18” Active Vented Subwoofer Speaker System • 16 presets directly available • 8 Metal Handgrips Technical Information Amplifier Module Low 1:

B&O ICEpower 1000ASP B&O ICEpower 1000A Amplifier Output Low 1: 1000 Watt RMS in 4 Ohm Amplifier Output Low 2: 1000 Watt RMS in 4 Ohm Damping factor at 100 Hz: > 2000 in 8 Ohm Input Sensitivity: 0 dBu XLR High Out: +6 dBu at +0 dBu Input. Amplifier Module Low 2:

650 650 1220

18”

DSP: Marani Dig Amp DSP Freq. Response (-3 dB): 32 – Fh Hz Freq. Range (-10 dB): 26 – Fh Hz Sensitivity (Half Space): 106 dB / W / m Max. SPL at 1 m (Theoret.): 139 dB Nom. Dispersion (HxV): 360° x 180° Dimensions (LxWxH): 650 x 650 x 1220 mm Net Weight: 81 kg

2000W

LT-18HLA

LT-15HLA

Active Speaker with processing

D3475

D3476

• 18” Active Horn Loaded Subwoofer Speaker System • 16 presets directly available • 16 Metal Handgrips

• 15” Active Horn Loaded Subwoofer Speaker System • 16 presets directly available • 4 Metal Handgrips

Technical Information Amplifier Module Low: Amplifier Output Low: Damping factor at 100 Hz: Input Sensitivity: XLR High Out: DSP: Freq. Response (-3 dB): Freq. Range (-10 dB):

600 600 810

B&O ICEpower 1000ASP 1000 Watt RMS in 4 Ohm > 2000 in 8 Ohm 0 dBu +6 dBu at +0 dBu Input. Marani Dig Amp DSP 38 – Fh Hz 34 – Fh Hz

15”

• Engineered in EU • Built-in DSP • Bang & Olufsen / ICE-Power

1000W

Sensitivity (Half Space): Max. SPL at 1 m (Theoret.): Nom. Dispersion (HxV): Dimensions (LxWxH):

106 dB / W / m 136 dB 360° x 180° 600 x 600 x 810 mm

Technical Information Amplifier Module Low 1: Amplifier Module Low 2: Amplifier Output Low 1: Amplifier Output Low 2: Damping factor at 100 Hz: Input Sensitivity: XLR High Out: DSP:

Touring Series 01_02_DAP_Speakers_10_temp2011.indd 139

640 770 1240

B&O ICEpower 1000ASP B&O ICEpower 1000A 1000 Watt RMS in 4 Ohm 1000 Watt RMS in 4 Ohm > 2000 in 8 Ohm 0 dBu +6 dBu at +0 dBu Input. Marani Dig Amp DSP

18”

[Speakers]

Freq. Response (-3 dB): Freq. Range (-10 dB): Sensitivity (Half Space): Max SPL at 1 m (Theoret.): Nom. Dispersion (HxV): Dimensions (LxWxH): Net Weight:

32 – Fh Hz 26 – Fh Hz 108 dB / W / m 141 dB 360° x 180° 640 x 770 x 1240 mm 85 kg

2000W

139 04.03.11 22:19

Touring Series Spe peak aker ak erss er Ribbon-Series

DAP audio is very proud to introduce the new DAP Ribbon Speaker Series to set an new quality standard as high as possible. The main advantage is the very low distortion of the high frequencies, a very flat phase and frequency response as well a very low distortion at extreme high power levels. The wave guide and the heat sink at the back of the Ribbon Tweeter makes it also possible to increase to power handling and reduce the distortion, as well as to get the optimal horizontal coverage. The new Ribbon Tweeters have a very high efficiency by using Neodymium magnets, so it is suitable for those people who want a high quality PA sound reproduction. The benefits are: • Very low distortion at any sound pressure level • Very flat frequency response • No colorization • Frequency response, up to 40 KHz • Excellent impulse behavior • Excellent phase response • Extreme high power handling All the low speakers are made with Aluminum Die Cast frames and have optimized Thiele Small Parameters to get the highest efficiency and power handling possible. Features: • New style grille • Dual Ribbon Tweeter Protection Circuit • Two Flying Rails at each side and one Back Fling Rail. • Two metal handgrips

RB-10 D3401

Flying Eye Available models:

D8418

Big

D8428

Small

10” Speaker with Ribbon Driver

Technical Information Nominal Impedance: Power Handling: Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency:

Special features: • Very natural sound due to ribbon on drivers • Advanced temp and overload driver protection circuit • Low distortion at high sound pressure levels • Integrated riging strips

300 320 590

8 Ohm 300 Watt Continuous 600 Watt Program 1200 Watt Peak 75 – 40.000 Hz 60 – 40.000 Hz 2200 Hz, 18 - 12 dB/Oct

10”

Sensitivity (Full Space): Peak SPL at 1 m: Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

95 dB / W / m 125.8 dB (Theoretical) 60° x 20° 300 x 320 x 590 mm 15 kg

8 Ohm

300W

RB-12 D3402

Technical Information Nominal Impedance: Power Handling: Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency:

RB-15 D3403

12” Speaker with Ribbon Driver

400 400 710

8 Ohm 400 Watt Continuous 800 Watt Program 1600 Watt Peak 67 – 40.000 Hz 55 – 40.000 Hz 2000 Hz, 12 - 12 dB/Oct

12”

Sensitivity (Full Space): Peak SPL at 1 m: Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

97 dB / W / m 129 dB (Theoretical) 60° x 20° 400 x 400 x 710 mm 23 kg

Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency:

8 Ohm

400W

140 01_02_DAP_Speakers_10_temp2011.indd 140

15” Speaker with Ribbon Driver

Technical Information Nominal Impedance: Power Handling:

8 Ohm 500 Watt Continuous 1000 Watt Program 2000 Watt Peak 42 – 40.000 Hz 36 – 40.000 Hz 1800 Hz, 18 - 12 dB/Oct

470 480 770

15”

Sensitivity (Full Space): Peak SPL at 1 m: Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

97 dB / W / m 130 dB (Theoretical) 60° x 20° 470 x 480 x 770 mm 30 kg

8 Ohm

500W

Touring Series

[Speakers] 04.03.11 22:19

Touring Series Spe peak aker ak erss er Compact Array D3710

Line-array 12” top

DAP Pro offers you a Compact line array for midsize and large venue sound reinforcement. The Constant curve line array L-12 cabinet is designed for the high performance installation and touring market. Due to high quality components combined with a flexible stacking and flying system, this loudspeaker system is particularly suitable for the professional sound engineer. Technical Information Nominal Impedance: Power Handling: Freq. Response (-3 dB): Freq. Range (-10 dB): Crossover Frequency:

440 395 597

12 Ohm 400 Watt Continuous 800 Watt Program 1600 Watt Peak 75 – 15.000 Hz 60 – 18.000 Hz 1700 Hz, 12-18 dB/Oct

12”

12 Ohm

Sensitivity (Full Space): Peak SPL at 1m (Theoret.): Nominal Dispersion (HxV): Dimensions (LxWxH): Net Weight:

98 dB / W / m 130 dB 100° x 15° 440 x 395 x 597 mm 26 kg

400W

Special features: Flexible stack and flying system • Briljant and clean sound • Optimised gain before feedback • Constant curve horn technology • One Stage-amp 2.6 can power 6 Units due to 12Ohm impedance

Short pin D3704

Touring Series 01_02_DAP_Speakers_10_temp2011.indd 141

For Compact Array

[Speakers]

Riggingbar for compact array D3717

141 04.03.11 22:19

Install Series Spe peak aker ak erss er MI-Series

DAP Audio presents brilliant sound in very compact sized cabinets: the MI-series. An ideal series for fixed installations in pubs, restaurants, clubs or home cinemas. The range carries two satellites and one dual coil15” subwoofer. Due to its sophisticated design one sub-woofer and up to eight satellites can be driven by only one amplifier. No cross-over is needed, as the subwoofer has its own built-in cross-over. Designed primarily for use in reproduced sound situations these compact, powerful systems are equally at home in distributed PA for speech and vocal reinforcement or light entertainment. Special features: • Only one amplifier needed for sub and multiple satalites • High quality finish • Brackets included • HiFi Sound Quality

Special features: • Only one amplifier needed for sub and multiple satalites • High quality finish • Brackets included • 16 Ohm enables 2 sets on one subwoofer • HiFi Sound Quality

MI-250 D3282 D3282W

Bracket included!

2 x 5” 160W 8 Ohm - Black 2 x 5” 160W 8 Ohm - White

Technical Information 2-way passive d’Appollito vented satellite speaker system, including mounting bracket Nominal Impedance: 8 Ohm Power Handling: 160 Watt Continuous Freq. Response (-3 dB): 70 – 20,000 Hz Sensitivity (Full Space): 98 dB / W / m

185 190 435

5”

8 Ohm

142 01_02_DAP_Speakers_10_temp2011.indd 142

MI-150 D3281

D3281W Dispersion: Dimensions (LxWxH): Net Weight:

160W

100° conical 185 x 190 x 435 mm 6 kg

Bracket included!

5” 80W 16 Ohm - Black 5” 80W 16 Ohm - White

Technical Information 2-way passive vented satellite speaker system, Including mounting bracket Nominal Impedance: 16 Ohm Power Handling: 80 Watt Continuous Freq. Response (-3 dB): 70 – 20,000 Hz Sensitivity (Full Space): 87 dB / W / m

4,72

Install Series

175 190 265

5”

16 Ohm

Dispersion: Dimensions (LxWxH): Net Weight:

100° conical 175 x 190 x 265 mm 4,72 kg

80W

[Speakers] 04.03.11 22:20

Install Series Spe peak aker ak erss er

Special feat features: • Only one amplifier amp needed for sub and multiple satalites satalite • High quality ality finish • Built-in cross-over with high pass output for satelite speakers • HiFi Sound Quality

MI-120B 12” Subwoofer 12 inch Dual Voice Coil Subwoofer D3287

Technical Information Woofer:

Alu Basket 2x 4 Ohm, 75 mm Voice Coil Nominal Impedance: 2x 4 Ohm Power Rating Stand Alone: 2x 200W Continuous 2x 400W Program 2x 800W Peak Power Rating with Satellites: 2x 400W Continuous 2x 800W Program 2x 1600W Peak Satellites Impedance: 8 Ohm (4 – 16 Ohms)

410 433 500

12”

2x4

Crossover Freq. Low: Crossover Freq. High: Average sensitivity: Maximum Peak SPL: Frequency Response: Frequency Range: Dispersion (HxV): Dimensions (LxWxH): Weight:

2x400W

125 Hz, 12 dB/oct. 125 Hz, 6 dB/oct 100 dB/W/m Half Space 132 dB at 1 m 44 – 125 Hz (-3 dB) 35 – 200 Hz (-10 dB) 360° x 180° 410 x 433 x 500 mm 22 kg

MI-152B D3286

D3286W

Technical Information 15” 4th Order Bandpass Dual Voice Coil Subwoofer Build in passive crossover for satellite speakers Nominal Impedance: 2 x 4 Ohm Power Handling: 300 Watt Total Continuous Freq. Response (-3 dB): 45 – 200 Hz Sensitivity (Half Space): 97 dB /W /m Dimensions (LxWxH): 677 x 465 x 340 mm Net Weight: 35 kg

Install Series 01_02_DAP_Speakers_10_temp2011.indd 143

15” Dual coil Bass 300W 2 x 4 Ohm - Black 15” Dual coil Bass 300W 2 x 4 Ohm - White

677 465 340

15”

[Speakers]

2x4 Ohm

300W

143 04.03.11 22:20

Install Series Spe peak aker ak erss er PR-Series Passive

PR-32 D3501

D3502

Technical Information 2-way passive plastic vented speaker system, including mounting/hanging brackets Woofer: 3.5”, 16 Ohm, Rubber Edge Tweeter: 12.6 mm Mylar Dome Tweeter Nominal Impedance: 16 Ohm

130 140 200

1,6

PR-62 D3505

D3506

PR-52

40W - This set contains 2 pcs. Black 40W - This set contains 2 pcs. White

3,5”

D3503

D3504

Power Handling Freq. Range (-10 dB): Dimensions (LxWxH): Net Weight:

16 Ohm

40 Watt Continuous 65 – 20,000 Hz 130 x 140 x 200 mm 1,6 kg

205 220 290

3,3

6,5”

16 Ohm

D3508

PR-82

Power Handling: Freq. Range (-10 dB): Dimensions (LxWxH): Net Weight:

65 Watt Continuous 50 – 20.000 Hz 205 x 220 x 290 mm 3,3 kg

4,38

205 220 290

6,5”

8 Ohm

144 01_02_DAP_Speakers_10_temp2011.indd 144

2x 25W

2 x 25 Watt RMS 50 – 20.000 Hz Gain, Bass, Treble 205 x 220 x 290 mm 4,38 kg

16 Ohm

85W - This set contains 2 pcs. Black 85W - This set contains 2 pcs. White

Technical Information 2-way passive plastic vented speaker system, including mounting/hanging brackets Woofer: 8”, 16 Ohm, Rubber Edge Tweeter: 25,2 mm Textile Dome Tweeter

265 270 365

8”

16 Ohm

50 Watt Continuous 50 – 20.000 Hz 185 x 175 x 250 mm 2,5 kg

50W

D3510

6,6

Amplifier Output Power: Freq. Range (-10 dB): Controls: Dimensions (LxWxH): Net Weight:

5,25”

Power Handling: Freq. Range (-10 dB): Dimensions (LxWxH): Net Weight:

D3509

65W

2 x 25W - This set contains 2 pcs, 1 active/1 passive. Black 2 x 25W - This set contains 2 pcs, 1 active/1 passive. White

Technical Information 2-way active plastic vented speaker system, including mounting/hanging brackets Woofer: 6.5”, 8 Ohm, Rubber Edge Tweeter: 12,6 mm Mylar Dome Tweeter

185 175 250

2,5

PRA-62 D3507

Technical Information 2-way passive plastic vented speaker system, including mounting/hanging brackets Woofer: 5.25”, 16 Ohm, Rubber Edge Tweeter: 12,6 mm Mylar Dome Tweeter Nominal Impedance: 16 Ohm

40W

65W - This set contains 2 pcs. Black 65W - This set contains 2 pcs. White

Technical Information 2-way passive plastic vented speaker system, including mounting/hanging brackets Woofer: 6.5”, 16 Ohm Tweeter: 12,6 mm Mylar Dome Tweeter Nominal Impedance: 16 Ohm

50W - This set contains 2 pcs. Black 50W - This set contains 2 pcs. White

Nominal Impedance: Power Handling: Freq. Range (-10 dB): Dimensions (LxWxH): Net Weight:

16 Ohm 85 Watt Continuous 35 – 20.000 Hz 265 x 270 x 365 mm 6,6 kg

85W

PRA-82 D3511

D3512

2 x 25W - This set contains 2 pcs, 1 active/1 passive. Black 2 x 25W - This set contains 2 pcs, 1 active/1 passive. White

Technical Information 2-way active plastic vented speaker system, Including mounting/hanging brackets Woofer: 8”, 8 Ohm, Rubber Edge Tweeter: 25,2 mm Textile Dome Tweeter

7,98

Install Series

265 270 365

8”

8 Ohm

Amplifier Output Power: Freq. Range (-10 dB): Controls: Dimensions (LxWxH): Net Weight:

2 x 25 Watt RMS 35 – 20.000 Hz Gain, Bass, Treble 265 x 270 x 365 mm 7,98 kg

2x 25W

[Speakers] 04.03.11 22:20

Install Series Spe peak aker ak erss er Special features: • One built-in amplifier for both speakers • Light weight • Brackets included • Scratch resistant housing • Easy to clean

PM-Series Passive

• Light weight Plastic speaker cabinet. • Ideal for background music. • Available in black and white housing. One Set: 2 pcs. white or 2 pcs. black

PM-42 D3801B

D3801W

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

Technical Information Power Rating (Low + High): 25 Watt RMS Frequency Response: 70– 18.000 Hz Efficiency: 88 dB/W/m (Full Space)

243 150 151

3,4

PM-62 D3802B

D3802W

4”

Bass speaker: High speaker: Dimensions (LxWxH): Weight:

16 Ohm

4” polypropylene 0,75” dome 243 x 150 x 151 mm 3,4 kg

25W

PM-82 D3803B

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

Technical Information Power Rating (Low + High): Frequency Response: Efficiency:

348 203 208

6,5

50 Watt RMS 55– 20.000 Hz 89 dB/W/m (Full Space)

6,5”

D3803W Bass speaker: High speaker: Dimensions (LxWxH): Weight:

16 Ohm

6,5” polypropylene 0,75” dome 348 x 203 x 208 mm 6,5 kg

D3811W

7,8

348 203 208

6,5”

50W

D3812B D3812W

High speaker: EQ section: Gain: Dimensions (LxWxH): Weight:

0,75” dome 2 bands eq +/- 15 dB 30 dB (max.) 348 x 203 x 208 mm 7,8 kg

8”

Bass speaker: High speaker: Dimensions (LxWxH): Weight:

16 Ohm

8” polypropylene 0,75” dome 420 x 249 x 253 mm 12 kg

85W

Moulded Speakers - 2 pcs, Black, 8 Ohm Moulded Speakers - 2 pcs, White, 8 Ohm

Technical Information Power Rating (Low + High): 85 Watt RMS Frequency Response: 45– 20.000 Hz Efficiency: 90 dB/W/m (Full Space) Bass speaker: 8” polypropylene

Install Series 01_02_DAP_Speakers_10_temp2011.indd 145

420 249 253

85 Watt RMS 45– 20.000 Hz 90 dB/W/m (Full Space)

PMA-82

Moulded Speakers - 2 pcs, Black, 8 Ohm Moulded Speakers - 2 pcs, White, 8 Ohm

Technical Information Power Rating (Low + High): 50 Watt RMS Frequency Response: 55– 20.000 Hz Efficiency: 89 dB/W/m (Full Space) Bass speaker: 6,5” polypropylene

Technical Information Power Rating (Low + High): Frequency Response: Efficiency:

50W

PMA-62 D3811B

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

420 249 253

8”

[Speakers]

High speaker: EQ section: Gain: Dimensions (LxWxH): Weight:

0,75” dome 2 bands eq +/- 15 dB 30 dB (max.) 420 x 249 x 253 mm 15 kg

85W

145 04.03.11 22:20

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms

Desk Top Amplifiers

These products are designed for PA system applications such as announcement, intercommunication, background music and broadcasting in convention-halls, shopping centers, dining rooms, auditoriums and recreation areas. The desk top amplifiers require no complicated protective circuit to withstand overload or short-circuits of output. This results in very high reliability.

MA15 D6101

15W/4 Ohm PA Amplifier, 230V AC/12V DC

CD Player, 2 mic,1 aux input • Two unbalanced 6.3 mm jack inputs mic sensitivity • One auxiliary Jack mono input. • Final stages completely protected thermal shut down and short protection.

Technical Information Power output: RMS 15W Harmonic distortion: <1% Freq. response: 100 Hz ~ 20 kHz S/N ratio: AUX-IN > 80 dB Inputs: MIC -1,2: -45 dB AUX: -22 dB Output: COM 4~16 Ohm

Controls:

3-volume controls 3-6.3 mm jack 1-power switch Power supply: DC 12V or AC 230V Dimensions (LxWxH): 240 x 220 x 78 mm Weight: 2,21 kg

MA15CD D6102

15W/4 Ohm Amplifier with CD/MP3 Player, 230V AC/12V DC

CD Player, 2 mic, 1 aux input • This device is also suited for MP-3-Playback • Two unbalanced 6.3 mm jack inputs mic sensitivity • One Auxiliary Jack mono input • Built-in CD-PLAYER • Final stages completely protected thermal shut down and short protection.

Technical Information Power output: RMS 15W Harmonic distortion: <1% Freq. response: 100 Hz ~ 20 kHz S/N ratio: AUX-IN > 80 dB Inputs: MIC -1,2: -45 dB AUX: -22 dB Output: COM 4~16 Ohm

Controls:

3-volume controls 3-6.3 mm jack 1-power switch Power supply: DC 12V or AC 230V Dimensions (LxWxH): 240 x 220 x 78 mm Weight: 2,4 kg

MA45CD D6103

45W/100V Amplifier with CD/MP3 Player, 230V AC/12V DC

CD player, 3 mic • One auxiliary RCA mono input. AC 230V, power supply in direct current (DC 12V). • The device is also suited for MP3-Playback Technical Information Power output: Power supply:

RMS 45W AC: 220-240V 50 Hz, DC: 12V Rated power consumption: AC: 110W DC: 40W DC12V Output terminal block: Low imp.: 4~16 Ohm High voltage: 50V, 70V, 100V Input sensitivity: Mic 1-3: - 52 dB ± 1 dB AUX: - 20 dB ± 2 dB S/N (1 kHz, rated output): Mic 1-3: 55 dB, AUX: 63 dB THD (AUX Input 1 kHz): < 1.0% Freq. response (load 4 Ohm, Output. 2V, -3 dB): MIC 1-3: 30~15 kHz AUX: 30~25 kHz

146 01_02A_DAP_100V_10_temp2011.indd 146

100V Amplifiers

Tone control: Alarm function: Protection:

Dimensions (LxWxH): Weight:

Bass: 100 Hz ± 10 dB Treble: 10 kHz ± 10 dB Siren Over heat protection; Overload protection Protection for short-circuit of the output 400 x 305 x 100 mm 7,7 kg

[100V P.A. Systems] 07.03.11 09:19

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms PA90CDT D6110

90W/100V Amplifier with CD/MP3 Player and Tuner, 230V AC/24V DC

Front: CD player, tuner, 2 mic, 1 mic/AUX • This device is also suited for MP-3 Playback • Overheat, Overload and short circuit protection • Bass/Treble tone control • Siren ON/OFF switch Backside: • Power supply: AC 220-240V 50 Hz, DC: 24V • Output: 4 Ohm, 25V, 70V, 100V • ON/OFF switch for DC battery • Automatic transfer to DC power if AC power fails

Technical Information Power output: Rated power consumption: Input sensitivity Mic 1-3:: Input sensitivity AUX: S/N (Input 1 kHz, rated output):

THD (AUX Input 1 kHz):

RMS 90W AC: 230W - 52 dB ± 1 dB - 20 dB ± 2 dB Mic 1-3: 52 dB, rated output; AUX: better than 60 dB, rated output; < 1.0%

Freq. response: (load 4 Ohm, output 2V, -3 dB):Mic 1-3: 50~15kHz, AUX: 50~18 kHz Tone control: Bass: 100 Hz ± 10 dB Treble: 10 kHz ± 10 dB Tuner: PLL AM/FM ratio Dimensions (LxWxH): 400 x 305 x 100 mm Weight: 9,5 kg

PA100CD

D6111 100W/100V Amplifier with CD/ MP3 Player, 230V AC

Front: CD player, 3 mic inputs • Overheat, Overload and short circuit protection • CD volume, Bass/Treble tone control, AUX and MIC 1, 2, 3 control Backside: • Power supply: AC 220-240V 50 Hz • Output: 4, 8. 16 Ohm, 25V, 70V, 100V • Stereo LINE OUT and Stereo AUX-IN for CD-Player, Cassette

Technical Information RMS output: 100W LED VU meter Power supply: 230V Freq. response: 50 Hz ~ 20 kHz (±3 dB) Harmonic distortion: 0.8% S/N Ratio: 75 dB Input sensitivity: Mic-1. 2. 3 (-54 dB) 6.3 jack input AUX (-20 dB) RCA jack Line out: 0 dB/1V MIC input: unbalanced Tone control: Bass: 100 Hz ± 10 dB Treble: 10 kHz ± 10 dB

THD: S/N Ratio: CD-PLAYER: Output level: Power supply: Dimension:

less than 1% Mic: 60 dB AUX: 75 dB 1.3V ± 2 dB (Only AC) 115V/230V 450 x 320 x 100 mm (LxWxH)

100V Amplifiers 01_02A_DAP_100V_10_temp2011.indd 147

[100V P.A. Systems]

147 07.03.11 09:19

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms PA180 D6112

180W Amplifier with 4 Speaker Zone Controls, 230V AC

4 unbalanced 6.3 mm jack inputs / mic sensitivity • One auxiliary RCA stereo inputs, four stage line sensitivity selectable • One PRE OUT, One MAIN IN • Priority function of inputs 1-4 over auxiliary AUX switch activation, priority function of input 1 over other inputs, activated Microphone (voice priority) • Slave outputs for “music on hold” function • Zone paging broadcast indicated LED • 600 Ohm telephone paging input built-in • Treble and bass controls • LED indicator • Outputs for low-impedance and constant voltage speaker • Power supply in alternating current 230V AC • Signal indicated LED • Clip indicated LED • Output port indicated LED Technical Information Power output: RMS 180W Freq. response: 50~20 kHz ± 3 dB Power supply: Only 230V Input/sensitivity: Mic - 1~4 (6.3 jack) unbalance 1.3 mV (-56 dB) AUX/RCA: AUX (-18 dB) tape (-14 dB) tuner (-9 dB) CD (-5 dB) to select switch Main in (0 dB/1V) Output (Ohm): COM 4, 8, 16 Ohm Output (V): 25, 70, 100V

Controls:

5 volume controls, master volume, treble/bass, 4-selector speaker, 1-muting activols Total harmonic distortion:< 0.5% S/N ratio: INPUT 1-4: >60 dB AUX IN: >70 dB MAIN IN 1-4: >80 dB Dimensions (LxWxH): 433 x 310 x 89 mm Weight: 10,3 kg

PA240 D6113

240W Amplifier with 4 Speaker Zone Controls, 230V AC

4 balanced COMBO inputs / mic sensitivity selectable and switchable 24 Vdc phantom supply. • One auxiliary RCA stereo inputs, four stage line sensitivity selectable • One PRE OUT • One MAIN IN • Priority function of inputs 1-4 over auxiliary AUX switch activation, priority function of input 1 over other inputs, activated Microphone (voice priority) • Slave outputs for “music on hold” function • Zone paging broadcast indicated LED • 4-Tone Chime • Paging selectable up to four zone • 600 Ohm telephone paging input built-in • Treble and bass controls • LED indicator • Outputs for low-impedance and constant voltage speaker • Power supply in alternating current (115V or 230V ac) • Signal indicated LED • Clip indicated LED • Output port indicated LED

148 01_02A_DAP_100V_10_temp2011.indd 148

100V Amplifiers

Technical Information Power Output: RMS 240W Freq. response: 50~20 kHz ± 3 dB Power supply: Only 230V Input/sensitivity: Mic-1~4 (COMBO INPUTS) balance 1.3 mV (-56 dB) & 24 VDC phantom supply for switch SEL (LINE/AUX) Mic/MIc -24V AUX/RCA: AUX (-18 dB) tape (-14 dB) tuner (-9 dB) CD (-5 dB) to select switch Main in (0 dB/1V) Chime output: 4-TONE: 440, 554, 659, 880 Hz

Output (Ohm): Output (V): Controls:

COM 4, 8, 16 Ohm 25, 70, 100V 5 volume controls, master volume, treble/bass 4-selector speaker, 1-muting activols, chime switch Total harmonic distortion: <0.5% S/N ratio: INPUT 1-4: >60 dB AUX IN: >70 dB MAIN IN 1-4: > 80 dB Dimensions (LxWxH): 433 x 310 x 89 mm Weight: 12,5 kg

[100V P.A. Systems] 07.03.11 09:19

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms VPA-060 D4141

60W/100 Volt Power Amplifier

VPA-150 D4142

150W/100 Volt Power Amplifier

VPA-250 D4143

250W/100 Volt Power Amplifier

Features: • • • • • • •

Two microphone inputs, two auxiliary inputs and two AUX out for line. Transformer isolated 240V, 110V, 70V and 4-16 Ohms speaker outputs. Muting function. Individual volume control and master volume control. Low and high tone control Output circuit shorting protection & alarm. Chime output.

Technical Information Model: VPA-60 Output: 60W Output regulation: Speaker output: AUX output: Inputs:

Distortion:

VPA-150 150W

VPA-250 250W

Signal to noise ratio:

Less than 3 dB, no load to full load Balanced 4-16 Ohm, 70V, 110V, 240V 600 Ohm 1V (0 dBV) Mic 1,2/600 Ohm, 2.0 mV (-54 dBV), unbalanced AUX 1,2/10 kilo-Ohm, 250 mV (-10 dBV), unbalanced Freq. response 100 HZ - 16 kHz Less than 0.1% at 1 kHz,

Tone: Protection: Muting function: Power Requirements: Power Consumption:

1/3 rated power Microphone 1,2 66 dB AUX 1,2 70 dB Bass: +- 10 dB at 100 Hz Treble: + -10 dB at 10 Hz AC fuse; DC voltage, overload and short circuit. Mic 1 overrides, other input signals with 0~-30 dB attenuation.

Dimensions: Gross Weight:

483 x 400 x 89 mm 16 kg 20 kg

24 kg

AC 220~240V/50 ~ 60 Hz 100W 200W 320W

MXPA-80 D6130

Multiplex professional PA Power Amplifier mplifier 80W

• Built-in CD player (MP3 readable) and Tuner module • Rack mountable (2U size, rack ear available) • Compact construction for reliable transportation and long term application • Versatile input section for different sound reinforcement applications, and 4-pin dipswitches enhance its functions • Pre out/Amp in for external processors connected into the sound system • Tape out for recording • Top priority of Siren and Tel. paging, then, higher priority of chime and Input 1 than other inputs • Bass and Treble controls for the master output • Low impedance and constant voltage output Technical Information Power supply: AC: 220-240V, 50 Hz DC 24V Power output: 80W RMS Freq. response: 50 Hz ~ 16,5 kHz (±3 dB) Input impedance and sensitivity: MIC: -55 dB V 5K Ohm BAL LINE: -10 dB V 5K Ohm BAL AUX: -20 dB V 10K Ohm UNB Tone Control: Bass: 100 Hz ±10 dB Treble: 10 kHz ± 10 dB THD (at 1W): <0.5% S/N ration: MIC > 65 dB LINE > 65 dB AUX > 75 dB Dips function (MIC/Euroblock): 1. MIC/LINE 2. BAL/UNBAL

3. HIGH PASS FILTER 4. 48V Phantom Dips function (AUX/Euroblock): 1. AUX 1/2 2. -10 dB PAD ENABLE 3. HIGH PASS FILTER 4. 0 dB u / -10 dB V Output Impedance: COM 4 Ohm, 8 Ohm, 16 Ohm Line Output: COM, 70V, 100V Siren function: Yes VU-meter (LED): Yes Telephone paging select function: Yes Input 1 priority: Yes 2-Tone CHIME: Yes

100V Amplifiers 01_02A_DAP_100V_10_temp2011.indd 149

Digital tuner module: Receive range: Sensitivity: S/N ratio: CD Player module: Channel: Frequency: Separation rate: T.H.D.: Dimensions (LxWxH): Weight:

[100V P.A. Systems]

FM: 87.5 ~ 108 MHz AM: 525 ~ 1650 kHz FM: 2.5S uV/ AM: 20 uV FM: 65 dB/ AM: 50 dB With MP3 reader function Output level: less than 2.0 dB ±0.5 / -1 dB; 0 +/- 1 dB; +/- 2 dB; -1+/- 2 dB >60 dB >0.05% 483 x 360 x 89 mm 9,1 kg

149 07.03.11 09:19

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms

MXPA-180 D6131

Multiplex professional PA Power Amplifier 180W

The MXPA-180 is a Professional Public Address Amplifier.

Technical Information Power supply: AC: 110~120V, 60 Hz AC: 220-240V, 50 Hz DC 24V Power output: 180W RMS Freq. response: 50 Hz ~ 16,5 kHz (±3 dB) Input impedance and sensitivity: MIC: -55 dB V 5 kilo-Ohm BAL LINE: -10 dB V 5 kilo-Ohm BAL AUX: -20 dB V 10 kilo-Ohm UNB Tone control: Bass: 100 Hz ± 10 dB Treble: 10 kHz ± 10 dB THD (at 1W): < 0.5% S/N ratio: MIC > 65 dB LINE > 5 dB AUX > 5 dB

Dips function (MIC/Euroblock):

Dips function (AUX/Euroblock):

Output impedance: Line output: Siren function: VU-meter (LED):

1. MIC/LINE 2. BAL/UNBAL 3. HIGH PASS FILTER 4. 48V PHANTOM 1. AUX 2. -10 dB PAD ENABLE 3. HIGH PASS FILTER 4. 0 dB u / -10 dB V COM, 4 Ohm, 8 Ohm, 16 Ohm COM, 70V, 100V Yes Yes

Teletone paging select function: Input 1 priority: 2-TONE CHIME: Dimensions (LxWxH): Weight:

Yes Yes Yes 483 x 380 x 89 mm (19” x 14.5” x 3.5”) 12.9 kg (28,44 lb)

MPA-440 D6120

Multizone PA poweramplifier 4 x 40W

• Four independent channels • Five sets of gain, treble, bass and volume controls • Five groups VU meter for output level • Three XLR+1/4 TRS combo input and two RCA inputs • Telephone paging function and monitor output • Priority of MIC-1. VOX mute function • Input matrix • Output impedance 4 Ohm, 8 Ohm • High output voltage: 25V-70V-100V • Power output: RMS 40W x4 • Intelligent cooling fan • 19” Rack mount type (3U size)

Technical Information AC115V/60 Hz or AC230V/50 Hz selectable. Inputs: Sensitivity: CH1-3: Mic.: -42 dB; Line: -20 dB balanced CH4-5: Line: -10 dB unbalanced Telephone paging: -25 dB Phantom Power: 15V Freq. response: 60-17000 Hz -3 dB Tone control: Treble: ±12 dB at 10 kHz Bass:±12 dB at 100 Hz T.H.D.: <0.6%

150 01_02A_DAP_100V_10_temp2011.indd 150

S/N ratio:

Mic. >60 dB Line: >70 dB Tel. >60 dB Priority for Mic 1: Sensitivity: -35 dB Output impedance: 4 Ohm, 8 Ohm Output constant voltage: 25V - 70V - 100V Power output: RMS 40W X4 at 4 Ohm LED: 5VU meters (LED type) 1 Power indicator 5 Mute indicators Dimensions (LxWxH): 483 x 310 x 133 mm Weight: 15,10 kg

100V Amplifiers

[100V P.A. Systems] 07.03.11 09:19

100V Amplifiers 100 00VV P.P.A. A. Sys yste tems te ms MPA-4150 D6121

Multizone PA Power amplifier 4 x 150W

• 4 independent channels • 4 sets of bass, Treble and volume controls • 4 groups LED level meter with protection indicator • 4 balance inputs for Mic. and input sensitivity control • Telephone paging function, terminal block and Phoenix type input type • Priority of MIC-1, VOX mute function • Output impedance: 4 Ohm • High output voltage 70V, 100V • Output power: 150W x 4 at 4 Ohm, Bridge: 280W x 2 at 8 Ohm • Tone CHIME / Siren function • Selectable input types: COMBO (TRS & XLR) Phoenix type

• Switchable input functions: MIC./Line input sensitivity Balanced/unbalanced input mode High pass filter 48V phantom power • Input mode selectable: Four independent inputs or input CH1 to output CH1-4 • 19” Rack mount type (3U size)

Tone control: T.H.D.%: S/N ratio: Priority for MIC.1:Sensitivity: Output impedance: Output constant voltage: Output power:

Treble: ±10 dB at 10 kHz Bass: ±10 dB at 100 Hz <0.5% Mic: >60 dB Line: >70 dB Tel: >60 dB -30 dB ± 5 dB Mono: 4, Bridge: 8 Mono: 70V, 100V; Bridge: 140V, 200V Independent: 100W x 4 at 4 Ohm, 8 Ohm

4-Tone Chime: Siren: Indicate LED:

Dimensions (LxWxH): Weight:

Bridge: 460W x 2 at 8 Ohm 440, 554, 659, 880 Hz four stage musical Manual switch on the front panel, remote control terminal on rear panel 4 for operation mode 4 VU meters (LED Type), volume control, sound control type 483 x 356 x 133 mm 8,3 kg

MPA-4250 D6122

Multizone PA Power Amplifier 4 x 250W

• Four independent outputs • Four sets of bass, treble and volume controls • Four groups LED level meter with protection indicator • Four balance inputs for Mic. and input sensitivity control • Telephone paging function, terminal block and Phonix terminal input type • Priority of MIC 1, VOX mute function • Output impedance: 4 Ohm • High output voltage: 70V, 100V • Output power: 250W x4, at 4 Ohm 460W x2, at 8 Ohm • Tone CHIME / Siren function • Selectable input types: COMBO (TRS & XLR) Phonix type • Switchable inputs function: MIC./Line input sensitivity Balance/ unbalance input mode High bass filter 48V phantom power • Input mode selectable: 4 independent inputs or input CH1 to output CH1~4 • 19 inch Rack mount type (3U size)

100V Amplifiers 01_02A_DAP_100V_10_temp2011.indd 151

Technical Information Power supply: AC 110V / 60 Hz or AC 230V / 50 Hz selectable Inputs 1~4: Sensitivity: Mic: -55 dB balance Line: -16 dB balance High filter: 150 Hz (-3 dB) Phantom: 48V Telephone paging function sensitivity: 120 mV Freq. response: Mic. 60 Hz ~ 12 kHz (-3 dB) Line: 30 Hz ~ 18 kHz (-3 dB) Tel: 120 Hz ~ 5 kHz (-3 dB) Tone control: Treble: ±10 dB at 10 kHz Bass: ±10 dB at 100 Hz T.H.D.%: < 0.5% S/N ratio: Mic: > 60 dB Line: > 70 dB Tel: > 60 dB Priority for MIC 1: Sensitivity: -30 dB ±5 dB

[100V P.A. Systems]

Output impedance: Mono: Bridge: Output constant volt.: Bridge: Output power: Independent: Bridge: 4-Tone Chime:

4 Ohm; 8 Ohm 70V, 100V 140V, 200V

150W x 4 at 4 Ohm, 460W x 4 at 8 Ohm 440, 554, 659, 880 Hz four stage musical Siren: Manual switch on the front panel, remote control terminal on rear panel Indicate LED: 4 for operation mode 4 VU meters (LED Type), volume control, sound control type Dimensions (LxWxH): 483 x 356 x 133 mm Weight: 15 kg

151 07.03.11 09:19

Conference Systems 100 00VV P.P.A. A. Sys yste tems te ms 8 Zones Multiroom System D2680

incl 8x Control Keypad & Remote

Multi-room/source distribution system Audio and Video signal distribution Easy connection and mounting system Master-slave link setup (10 units) Technical information: Power supply: Power consumption: Power connector: Output power: Output connector audio: Keypad connector: Keypad controls: Dimension:

AC 115V-60Hz, 230V-50Hz 240 Watt Schuko 8 zones 20 watt terminal connector RJ-45 (UTP cat-5) 6 stereo inputs (RCA) Source, bass, treble, volume 4 camera inputs (RJ-45) 4 video inputs (RCA) 413 x 427 x 88 mm (LxWxH) Video

room 1

152 01_02A_DAP_100V_10_temp2011.indd 152

Conference Systems

room 2

room 3

room 4

Tuner

room 5

room 6

room 7

room 8

[100V P.A. Systems] 07.03.11 09:19

Conference Systems 100 00VV P.P.A. A. Sys yste tems te ms Wireless Conference System Available models:

Wireless!

D2671

4-Channel (4 x 32 Channels), set: 4 mics

D2670

8-Channel (8 x 32 Channels), set: 8 mics

Technical information:

D2671 : Frequency range: With PLL combined technology:

Frequency stability: Operating range: T.H. D distortion: Frequency response: Audio frequency output: Tone frequency: RECEIVER Frequency range: Operating voltage: S/N ratio: T. H. D distortion: Frequency response:

UHF 500-980MHz adopt CPU control 3 group system frequency each group can be used 4 sets at the same time without interference (3x4=12 transmitter), 3 group frequency can be use 3x4=12 sets (3x4x4=48 transmitters ) <±10ppm >105dB <0.5% 40Hz -18KHz balanced output :0-600mV unbalanced output 0-300mV 32K-51.2KHz

500-980MHz DC-13.8V/1000mA >105dB <0.5% 40Hz-18KHz Noise locked +pilot tone locked

TRANSMITTER (Wireless conference microphone ) Power supply: 2x AA batteries , Standing time: about 8 hours

D2670 : Frequency range: With PLL combined technology:

Frequency stability: Operating range: T.H. D distortion: Frequency response: Audio frequency output: Tone frequency: RECEIVER Frequency range: Operating voltage: Sensitivity of receiver selective switch S/N ratio: T. H. D distortion : Frequency response: Noise locked +pilot tone locked

UHF 500-980MHz adopt CPU control 2 group system frequency each group can be used 3 sets at the same time without interference (3x8=24 transmitter), 2 group frequency can be use 2x3=6 sets (2x3x8=48 transmitters ) <±10ppm >105dB <0.5% 40Hz -18KHz balanced output: 0-600mV unbalanced output 0-300mV 32K-51.2KHz

500-980MHz DC-13.8V/1500mA >105dB <0.5% 40Hz-18KHz

4 or 8 Channels:

• Use UHF 500-980MHz range, adopt PLL combined technology, and the transmitter power is adjustable, they can be used several sets at the same time without interference. • CPU control with LCD display makes operation easy and performance outstanding. • Use multi-channel with high frequency to avoid the interference. • With audio compressing-expanding technology ,the machine can reduce the noises and increase the dynamic range. • Having backsound restrain function can avoid backsound scream. • The receiver adopt multi-level high frequency enlargement, so and has the high sensitivity. • Multi-level noise supervisory circuit .Special with the tone locked system make the machine have a strong anti-jamming characteristics. • Using the best parts and CPU, to keep the products with the perfect performance. • 100 meters in best condition, 60 meters in normal condition. The largest using range is above 100 meters in the spacious place, 50 meters for the ideal using range.

TRANSMITTER (Wireless conference microphone ) Operating Frequency: 500-980MHz Transmitter power: H 10dBm ,L 5dBm Cartridge gain adjusting: -20dB to 30dB Modulate mode: FM With FM Max frequency adjusting: ±45KHz High wave: <main wave 60dB Power supply: 2*AA batteries , standing time: about 8 hours TRANSMITTER (Wireless conference microphone) Operating frequency: 500-980MHz Transmitter power: H 10dBm ,L 5dBm Cartridge gain adjusting: -20dB to 30dB Modulate mode: FM With FM Max frequency adjusting: ±45KHz High wave: <main wave 60dB Power supply: 2x AA batteries, standing time: about 8 hours

Conference Systems 01_02A_DAP_100V_10_temp2011.indd 153

[100V P.A. Systems]

153 07.03.11 09:19

100V Hornspeakers 100 00VV P.P.A. A. Sys yste tems te ms THD15 D6201

SHD25

Round speaker horn 15W, 8 Ohm

D6206 Square horn speaker, 25W, 8 Ohm

15W horn speaker to be used in installations where multiple speakers are used to cover a large surface.

210 210 210

0,85

15W

IP-66

Technical information: Type: Input power (RMS): Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

25W horn speaker meant for speech reproduction in installations that need to cover a big space.

0,84 Type: Input power (RMS): Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

D6202

IP-66

Square 25W 8 Ohm 300~900 Hz 100 dB Aluminium 200 x 210 x 150 mm 0,84 kg

SHD35

Round speaker horn 25W, 8 Ohm

D6207 Square horn speaker, 35W, 8 Ohm

25W horn speaker to cover a large surface with a high sound pressure level.

1,1

250 250 250

25W

35W horn speaker to cover big surfaces that need a high sound pressure level.

IP-66

Technical information:

1,05

247 245 175

35W

IP-66

Technical information: Round (10”) 25W 8 Ohm 300~800 Hz 107 dB Aluminium 250 x 250 x 250 mm 1,1 kg

Type: Rated power: Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

Square 35W 8 Ohm 300~10.000 Hz 107 dB Aluminium 247 x 245 x 175 mm 1,05 kg (2.2 1b)

THD40

SHD40

Round speaker horn 40W, 8 Ohm (complete assembled)

D6208 Square horn speaker, 40W, 8 Ohm (complete assembled)

40W horn speaker to be used in installations where multiple speakers are used to cover a large surface.

Square type horn speakers for controlled directivity. Made of aluminium, they are easy to install. 8 Ohm impedance for direct matching to standard amplifiers.

D6203

2,1

360 398 398

40W

IP-66

Technical information: Type: Input power: Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

25W

Technical information: Round (8”) 15W 8 Ohm 300~800 Hz 100 dB Aluminium 210 x 210 x 210 mm 0,85 kg

THD25

Type: Input power: Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

200 210 150

2,0

357 365 228

40W

IP-66

Technical information: Round (16”) 40W 8 Ohm 250 ~ 5 kHz 112 dB Aluminium 360 x 398 x 398 mm 2,1 kg

154 01_02A_DAP_100V_10_temp2011.indd 154

Type: Input power (RMS): Impedance: Freq. response: S.P.L: Material: Dimensions (LxWxH): Weight:

100V Hornspeakers

Square 40W 8 Ohm 250~7 kHz 105 dB Aluminium 357 x 365 x 228 mm 2,0 kg

[100V P.A. Systems] 07.03.11 09:19

100V Hornspeakers 100 00VV P.P.A. A. Sys yste tems te ms PSH10T

TH10T

100V

D6211

ABS square horn speaker, 10W,

D6216

Round type horn speakers. The material of horn flat is aluminium. ABS resin for inner horn and rear cover. Includes line transformer for constant voltage.

10W/100V Square horn speaker: Made of ABS resin. Includes line transformer for constant voltage in 25, 70 or 100V systems. The output power can be selected for different impedances. IP-66. 180 176 153

10W

IP-66

Technical information: Rated input power: Input impedance: Pre-set impedance: Freq. Response: Output power: S.P.L: Material: Dimensions (LxWxH):

Input power (RMS): Input impedance: Pre-set impedance: Freq. response: S.P.L: Material: Diameter: Dimensions (LxWxH):

PSH15T

TH15T

100V

ABS square horn speaker, 15W,

228 222 171

15W

D6217

IP66 Round speaker horn 15W,

230 213 197

15W

IP-66

Technical information: 15W (70V, 25V line) 42 Ohm, 63 Ohm, 170 Ohm, 330 Ohm, 500 Ohm, 1 kilo-Ohm, 1.3 kilo-Ohm, 2.3 kilo-Ohm -330 Ohm 450 Hz ~ 5 kHz (-10 dB) 1, 3, 5, 10, 15W 105 dB (1W/M) Aluminium 228 x 222 x 171 mm

Input power (RMS): Input impedance: Pre-set Impedance: Freq. response: S.P.L: Material: Diameter: Dimensions (LxWxH):

15W (100V line)196,8 670 Ohm, 1 kilo-Ohm, 2 kilo-Ohm, 3.3 kilo-Ohm, 10 kilo-Ohm 670 Ohm 280 ~ 12.500 kHz 108 dB (1W/M) Aluminium 212,5 mm 230 x 213 x 197 mm

PSH30T

TH30T

100V

D6213

ABS square horn speaker, 30W,

D6218

10W/100V Square horn speaker: Made of ABS resin. Includes line transformer for constant voltage in 25, 70 or 100V systems. The output power can be selected for different impedances. IP-66.

Technical information:

Pre-set impedance: Freq. response: Output power: S.P.L: Material: Dimensions (LxWxH):

IP-66

Round type horn speakers. The material of horn flat is aluminium. ABS resin for inner horn and rear cover. Includes line transformer for constant voltage.

IP-66

Technical information:

Rated input power: Input impedance:

10W

10W (100V line) 1 kilo-Ohm, 2 kilo-Ohm, 3,3 kilo-Ohm, 10 kilo-Ohm 1 kilo-Ohm 315 ~ 12.500 kHz 105 dB (1W/M) Aluminium 161,5 mm 187 x 162 x 171 mm

10W/100V Square horn speaker: Made of ABS resin. Includes line transformer for constant voltage in 25, 70 or 100V systems. The output power can be selected for different impedances. IP-66.

Pre-set impedance: Freq. response: Output power: S.P.L: Material: Dimensions (LxWxH):

187 162 171

Technical information: 10W (70V, 25V line) 63 Ohm, 130 Ohm, 500 Ohm, 1 kilo-Ohm, 1,7 kilo-Ohm, 2,9 kilo-Ohm 500 Ohm 500 Hz ~ 6 kHz (-10 dB) 1, 3, 5, 10W 103 dB (1W/M) Aluminium 180 x 176 x 153 mm

D6212

Rated input power: Input impedance:

IP66 Round speaker horn 10W,

258 287 209

30W

IP66 Round speaker horn 30W,

Round type horn speakers. The material of horn flat is aluminium. ABS resin for inner horn and rear cover. Includes line transformer for constant voltage.

IP-66

261 259 235

30W

IP-66

Technical information: 30W (70V, 75V line) 21 Ohm, 42 Ohm, 63 Ohm, 170 Ohm, 330 Ohm, 500 Ohm, 1 kilo-Ohm, 1,3 kilo-Ohm, 2,3 kilo-Ohm 170 Ohm 350 Hz ~ 5 kHz (-10 dB) 1, 3, 5, 10, 15, 15W 107 dB (1W/M) Aluminium 258 x 287 x 209 mm

Input power: Input impedance: Pre-set impedance: Freq. response: S.P.L: Material: Diameter: Dimensions (LxWxH):

100V Hornspeakers 01_02A_DAP_100V_10_temp2011.indd 155

30W (100V line) 330 Ohm, 670 Ohm, 1 kilo-Ohm, 2 kilo-Ohm, 3.3 kilo-Ohm, 10 kilo-Ohm 330 Ohm 250 ~ 16.000 kHz 109 dB (1W/M) Aluminium 259 mm 261 x 259 x 235 mm

[100V P.A. Systems]

155 07.03.11 09:19

100V Hornspeakers 100 00VV P.P.A. A. Sys yste tems te ms TH12 D6221

diameter

TH20

Round trumpet horn 30 cm

D6223

diameter

30 cm Trumpet Horn. Specially indicated for free air use or in big surfaces. Prepared for Driver HD35T, HD60T or HD80T.

1,3

247 314 404

50 cm Trumpet Horn. This diffusor, due to his size, is designed to join up compression motors of great power and be able to cover big surfaces. Prepared for Driver HD35T, HD60T or HD80T.

IP-66

Round Aluminium 314 mm 247 x 314 x 404 mm 1,3 kg

Type: Material: Diameter: Dimensions (LxWxH): Weight:

Round Aluminium 516 mm 385 x 516 x 505 mm 1,9 kg

TH16

SH15

40 cm Trumpet Horn. Specially thought for big surfaces. Prepared for Driver HD35T, HD60T or HD80T.

The SH-15 is a horn specially designed for use in application where sound should go wide and far, e.g. sport-centre. The horn is made of aluminium. Weight 1,4 kg. Prepared for Driver HD35T, HD60T or HD80T.

Round trumpet horn 40 cm diameter

1,5

317 395 445

D6224

IP-66

Driver 35W, 100V transformer

Type: Material: Dimensions (LxWxH): Weight:

HD60T D6227

Driver 60W, 100V transformer

IP-66

195 125 125

60W

HD80T D6228

195 125 125

IP-66

Driver 80W, 100V transformer

80W Driver with transformer line 100V adaptable to whatever horn of the range. Due to its features, it is specially indicated to be used for a clear audition.

80W

IP-66

Technical information:

Input power: Input voltage: Impedance:

Input power (RMS): 60W (with transformer) Input voltage: 100V Impedance: 170 Ohm (60W)/ 250 Ohm (40W)/500 Ohm (20W) Freq. response: 200 Hz ~ 4.5 kHz (-20 dB) S.P.L: 115 dB (1W/M) with TU-20 Material: Aluminium/Unit cover Dimensions: diameter bottom 110 mm diameter top 160 mm (diameter 4,3”/6,3”)

Input power (RMS): 80W (with transformer) Input voltage: 100V Impedance: 125 Ohm (80W) / 200 Ohm (50W) / 290 Ohm (35W) Freq. response: 200 Hz ~ 4.5 kHz (-20 dB) S.P.L: 115 dB (1W/M) with TU-20 Material: Aluminium/ Unit cover Dimensions: diameter bottom 110 mm diameter top 160 mm (diameter 4,3”/6,3”)

Freq. response: S.P.L: Material: Dimensions:

IP-66

Square Aluminium 302 x 380 x 361 mm 1,4 kg

35W driver with transformer line 100V adaptable to whatever 60W driver with 100V line transformer. Can be used with all horn of the range. horn-trumpets. Due to its features, it is specially thought to Due to its features, it is especially thought for a clear audition. be used where a high fidelity in word reproduction is necessary. • Includes line transformer for constant voltage. • Includes line transformer for constant voltage. • Watertight construction. • Watertight construction. • Compression chamber and bottom • Compression chamber and bottom pressure die-cast aluminium. pressure die-cast aluminium.

35W

302 380 361

Technical information: Round Aluminium 407 mm 317 x 395 x 445 mm 1,5 kg

HD35T

195 125 125

Square trumpet horn 38 x 23 cm

1,4

Technical information:

D6226

IP-66

Technical information:

D6222

Type: Material: Diameter: Dimensions (LxWxH): Weight:

385 516 505

1,9

Technical information: Type: Material: Diameter: Dimensions (LxWxH): Weight:

Round trumpet horn 50 cm

35W (with trans.) 100V 290 Ohm (35W)/ 500 Ohm (20W)/1 kilo-Ohm (10W) 200 Hz ~ 4 kHz (-20 dB) 115 dB (1W/M) with TU-20 Aluminium/Unit cover diameter bottom 110 mm diameter top 160 mm (diameter 4,3”/6,3”)

156 01_02A_DAP_100V_10_temp2011.indd 156

100V Hornspeakers

[100V P.A. Systems] 07.03.11 09:19

100V Hornspeakers 100 00VV P.P.A. A. Sys yste tems te ms

Horn Speakers

A voice coil is a tightly wrapped coil of wire attached to a speaker driver’s diaphragm and situated in close proximity to a stationary magnet; electromagnet that generates a magnetic field when current passes through it thus being repelled or attracted by a speaker driver’s magnet and creating motion.

SVC35 Spare voice coil for TH15T, SHD25, SHD35, THD25 D6233

SVC40 D6234

SHD40

Spare voice coil for TH40,

SVC15

SVC30

Spare voice coil for TH10T, PSH10T, PSH15T

PSH30T

SVC60

SVC100

D6231

D6235

& HD60T

Spare voice coil for SHD35

D6232

D6236

Spare voice coil for TH30T,

Spare voice coil for HD80T

Powered Megaphones

These megaphones deliver a clear effective voice amplification. The mini-typed megaphone with built-in siren or whistle functions can be applied in schools, home yards, or outdoor camps.

MF-8 D6420

MF-25F

Hand megaphone 8 W

D6422 Hand megaphone 25W with siren

Hand Grip Typ Megaphone

237 150 236

0,63 Technical Information Power: Max. 8W Range: 0.3 ~ 0.61 km depending on operating conditions Battery: 6 x “AA” (UM-3) type batteries (not supplied)

1,65

370 220 220

25W

Technical Information External power source: Speaker impedance: Dimensions (LxWxH): Weight:

7.2V battery or 6-1.2V DC 8 Ohm 237 x 150 x 236 mm 0,63 kg approx. (without battery)

Power: Range:

Max. 25W 0.8 ~2 km depending on operating conditions 8 x “C” (UM-2) type batteries (not supplied)

Battery:

External power source: Speaker impedance: Dimensions (LxWxH): Weight:

12V battery or 8 - 1.5V DC 8 Ohm 370 x 220 x 220 mm 1,65 kg approx.

(without battery)

MF-10S

MF-25S

Small, light and smart design • With built-in siren and designed for hand-holding use

Hand Grip Type with shoulder strap

D6421

0,9 Technical Information Power: Max. 10W Range: 0.5 ~ 0.8 km depending on operating conditions Battery: 8 x “AA” (UM-3) type batteries (not supplied)

Hand Grip Type • With built-in siren

Hand megaphone 10W with siren

320 180 180

External power source: Speaker impedance: Dimensions (LxWxH): Weight:

D6423 Shoulder and hand megaphone 25W with siren

10W 7.2V battery or 6-1.2V DC 8 Ohm 320 x 180 x 180 mm 0,9 kg approx. (without battery)

1,65 Technical Information Power: Max. 25W Range: 0.8 ~ 2 km depending on operating conditions Battery: 8 x “C” (UM-2) type batteries (not supplied) External power source: 12V battery or 8-1.5V DC

350 235 235

Speaker impedance: Cable: Dimensions (LxWxH): Weight:

25W 8 Ohm 1,5 m 350 x 235 x 235 mm 1,65 kg approx. (without battery)

PWA-5 D6430

Waistband amplifier 5W incl. microphone headset

Technical information: Condenser mic, 4 Ohm 2,5” papercone speaker Weight: ± 0,85 kg

100V Hornspeakers 01_02A_DAP_100V_10_temp2011.indd 157

[100V P.A. Systems]

157 07.03.11 09:19

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms PR-52T

PR-32T D3531 D3532

15W - This set contains 2 pcs. Black 15W - This set contains 2 pcs. White

Technical Information • 2-way plastic sealed box-design • 4” Mica cone rubber edge woofer • Tweeter: 13 mm Mylar dome tweeter • Frequency: 80 Hz - 20 kHz • 100V line transformer built in • 16 Ohm/2W/4W/8W/15W

155 160 210

2,04

4”

D3533 D3534

• Sensitivity: 89 dB • Dimensions: (LxWxH) 155 x 160 x 210 mm including mounting/hanging brackets • Weight: 2,04 kg

16 Ohm

PR-62T D3535 D3536

Technical Information • 2-way plastic sealed box-design • 5,25” mica cone rubber edge woofer • 13 mm mylar dome tweeter • Frequency: 50 Hz - 20 kHz • 100V line transformer built in • 16 Ohm/5W/10W/15W

165 180 240

2,46

5,25”

• Sensitivity: 89 dB • Dimensions: (LxWxH) 165 x 180 x 240 mm including mounting/hanging brackets • Weight: 2,46 kg

15W

16 Ohm

PR-82T

30W - This set contains 2 pcs. Black 30W - This set contains 2 pcs. White

Technical Information • 2-way plastic vented box-design • 6,25” mica cone rubber edge woofer • 13 mm mylar dome tweeter • Frequency: 40 Hz - 20 kHz • 100V line transformer built-in • 16 Ohm/4W/8W/15W/30W

4,06

15W - This set contains 2 pcs. Black 15W - This set contains 2 pcs. White

190 215 290

6,25”

158 01_02A_DAP_100V_10_temp2011.indd 158

D3537 D3538

• Sensitivity: 89 dB • Dimensions: (LxWxH) 190 x 215 x 290 mm including mounting/hanging brackets • Weight: 4,06 kg

30W

16 Ohm

100V Speakers

30W - This set contains 2 pcs. Black 30W - This set contains 2 pcs. White

Technical Information • 2-way plastic vented box-design • 8” mica cone rubber edge woofer • 25 mm silk dome tweeter • Frequency: 30 Hz - 20 kHz • 100V line transformer built-in • 16 Ohm/4W/8W/16W/30W

6,66

270 265 365

6,25”

• Sensitivity: 90 dB • Dimensions: (LxWxH) 270 x 265 x 365 mm including mounting/hanging brackets • Weight: 6,66 kg

30W

16 Ohm

[100V P.A. Systems] 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms PMT-42 D3820B D3820W

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

• Light weight Plastic speaker cabinet. • 100 V Line Transformer. 2, 4 ,8, 16 Watt. • Ideal for background music. • Available in black and white housing.

Technical Information Power Rating (Low + High): Frequency Response: Efficiency: Bass speaker: High speaker: Dimensions (LxWxH): Weight:

243 150 151

4,2

2,4,8,16 Watt RMS 70– 18.000 Hz 88 dB/W/m (Full Space) 4” polypropylene 0,75” dome 243 x 150 x 151 mm 4,2 kg

Speaker-Set! 16W RMS

PMT-62 D3822B D3822W

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

• Light weight Plastic speaker cabinet. • 100 V Line Transformer. 4, 8, 16, 30 Watt. • Ideal for background music. • Available in black and white housing.

Technical Information Power Rating (Low + High): Frequency Response: Efficiency: Bass speaker: High speaker: Dimensions (LxWxH): Weight:

348 203 208

8,5

4,8,16,30 Watt RMS 55-20.000 Hz 89 dB/W/m (Full Space) 6,5” polypropylene 0,75” dome 348 x 203 x 208 mm 8,5 kg

30W RMS

PMT-82 D3823B D3823W

Moulded Speakers - 2 pcs, Black Moulded Speakers - 2 pcs, White

• Light weight Plastic speaker cabinet. • 100 V Line Transformer. 4, 8, 16, 30 Watt. • Ideal for background music. • Available in black and white housing.

Technical Information Power Rating (Low + High): Frequency Response: Efficiency: Bass speaker: High speaker: Dimensions (LxWxH): Weight:

420 249 253

4,8,16,30 Watt RMS 45– 20.000 Hz 90 dB/W/m (Full Space) 8” polypropylene 0,75” dome 420 x 249 x 253 mm 15 kg

30W RMS

100V Speakers 01_02A_DAP_100V_10_temp2011.indd 159

[100V P.A. Systems]

159 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

CST 500/600 Serie incl. 100V transformer and firedome

CST-510 -510

CST-515 -515

5,5” ceiling speaker 10W incl. 100V line transformer, firedome

D6261 5,5” ceiling speaker 15W incl. 100V line transformer, firedome

Ceiling speaker 5,5”/10W incl. line transformer.

Ceiling speaker 5,5”/15W incl. line transformer.

D6260

Technical information:

Input power: Output power: Speaker: Input voltage: Impedance:

Input Power: Output Power: Speaker:

RMS 10W 2.5, 5, 10W 5.5”-8 Ohm paper cone speaker 50, 70, 100V 100V - 4 kilo-Ohm /2 kilo-Ohm /1 kilo-Ohm 70V - 2 kilo-Ohm /1 kilo-Ohm /490 Ohm 50V - 1 kilo-Ohm /490 Ohm /250 Ohm Freq. response: 100~18 kHz S.P.L: 90 dB (1W/M) Material: Metal (Metal grille) Ceiling Hole Diameter: 172 mm Speaker Diameter: 180 mm

RMS15 3.57, 7.5, 15 5.5”-8 Ohm paper cone speaker Input voltage: 50, 70, 100V Impedance: 100V - 2,66 kilo-Ohm /1,33 kilo-Ohm /666 Ohm 70V - 1,33 kilo-Ohm /666 Ohm /326 Ohm 50V - 666 Ohm /326 Ohm/166 Ohm Freq. response: 100~18 kHz S.P.L.: 90 dB (1W/M) Material: Metal (Metal grille) Ceiling Hole Diameter: 172 mm Speaker Diameter: 180 mm

CST-610 -610

CST-615 -615

Ceiling speaker 6,5”/10W incl. line transformer.

Ceiling speaker 6,5”/15W incl. line transformer.

6,5” ceiling speaker 10W incl. 100V line transformer, firedome D6270

D6271 6,5” ceiling speaker 15W incl. 100V line transformer, firedome

Technical information:

Input power: Output power: Speaker:

Input power: Output power:

RMS 10W 2.5, 5, 10W 6.5”-8 Ohm paper cone speaker Input voltage: 50, 70, 100V Impedance: 100V - 4 kilo-Ohm/2 kilo-Ohm /1 kilo-Ohm 70V - 2 kilo-Ohm /1 kilo-Ohm /490 Ohm 50V - 1 kilo-Ohm /490 Ohm/250 Ohm Freq. response: 100~20 kHz S.P.L.: 92 dB (1W/M) Material: Metal case (Metal grille) Ceiling Hole Diameter: 205 mm Speaker Diameter: 220 mm

RMS 15W 3.75, 7.5, 15W 6.5”-8 Ohm paper cone speaker Input-Voltage: 50, 70, 100V Impedance: 100V-2.66 kilo-Ohm /1,33 kilo-Ohm /666 Ohm 70V - 1,33 kilo-Ohm /666 Ohm /326 Ohm 50V-666 Ohm /326 Ohm/166 Ohm Freq. response: 100~20 kHz S.P.L.: 92 dB (1W/M) Material: Metal case (Metal grille) Ceiling Hole Diameter: 205 mm Speaker Diameter: 220 mm

CST-6506

D6280 6,5” ceiling speaker quickmount 6W incl. 100V line transformer

Ceiling speaker 6,5”/6W incl. 100V line transformer.

Technical Information Speaker: Input power: Output power: Input voltage:

160 01_02A_DAP_100V_10_temp2011.indd 160

100V Speakers

6,5” - 16 Ohm paper cone speaker Rated 6W 1,5, 3, 6W 6,6 kilo-Ohm/3,3 kilo-Ohm /1,66 kilo-Ohm

Impedance: Freq. Response: S.P.L: Ceiling Hole Diameter: Speaker Diameter:

100V 100 ~ 20 kHz 86 dB (1M/W) 178 mm 199 mm

[100V P.A. Systems] 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms CSE-610 E D6290

CSE-506 E

6” Economical Ceiling Speaker 6-10W

D6291

5” Economical Ceiling Speaker 3-6W

Technical information:

Frequency response: Long term power: Line voltage: Sensitivity: Impedance: Loudspeaker: Mounting diameter: Dimensions:

120Hz - 15kHz 8 Watt 70-100V 92dB 8 Ohm 6,5 inch 190-200 mm 230 x 65 mm

CST-6512

150Hz - 15kHz 5 Watt 70-100V 90dB 8 Ohm 5 inch 148-158 mm 180 x 60 mm

CST-6520

6,5” ceiling speaker quickmount 12W incl. 100V line transformer

D6282 6,5” ceiling speaker quickmount 20W incl. 100V line transformer

Ceiling speaker 6,5”/12W incl. 100V line transformer

Ceiling speaker 6,5”/20W incl. 100V line transformer

D6281

Technical information:

Speaker:

6,5” - 16 Ohm paper cone speaker Input power: Rated 12W Output power: 3, 6, 12W Input voltage: 3,3 kilo-Ohm/1,66 kilo-Ohm /833 kilo-Ohm Impedance: 100V S.P.L: 88 dB (1M/W) Ceiling Hole Diameter: 178 mm Speaker Diameter: 199 mm

CST-206

D6250W White 2,5” ceiling speaker 6 W incl. 100V line transformer

Input power: Output power: Input voltage: Impedance: Freq. Response: S.P.L: Ceiling Hole Diameter: Speaker Diameter:

6,5” - 4 Ohm paper cone speaker Rated 20W 5, 10, 20W 2 kilo-Ohm /1 kilo-Ohm /500 kilo-Ohm 100V 100 ~ 20 kHz 90 dB (1M/W) 178 mm 199 mm

D6250G Gold 2,5” ceiling speaker 6 W incl. 100V line transformer

CST-206 is for suspended ceiling installation. It has 2.5” 8 Ohm full range speaker and the grille is a metal construction. The assembly can be simply and quickly installed into the ceiling cavity. You can use them conveniently. There are two colour choices. (white and brushed gold) to meet different requirements of customers. Technical Information Input power: RMS 6W Output power: 6, 3, 1.5W Speaker: 2.5” - 8 Ohm paper cone speaker Impedance: 100V - 6,6 kilo-Ohm /3,3 kilo-Ohm /1,66 kilo-Ohm 70V - 3,3 kilo-Ohm /1,66 kilo-Ohm /816 Ohm 50V - 1,66 kilo-Ohm /816 Ohm /416 Ohm

Input voltage: S.P.L: Material: Ceiling Hole Diameter: Dimensions:

50, 70, 100V 86 dB (1W/M) Metal (Metal grille) 90 mm 101 x 55 mm

100V Speakers 01_02A_DAP_100V_10_temp2011.indd 161

[100V P.A. Systems]

161 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

Uni-directional Projector Speakers

100V uni directional Sound Projectors. They have a selector for adjusting the sound power. Recommended for music or speech reproduction. Weather-proof and suitable for indoor and outdoor use.

PST-115 D6320

Uni direction speaker 15W incl. 100V line transformer

Technical information: Input power: Output power: Speaker: Input voltage: Impedance:

Freq. response: Material:

RMS 15W 3.75, 7.5, 15W One 5.5” paper/ plastic cone speaker 50, 70, 100V 100V-2,66 kilo-Ohm/1,33 kilo-Ohm /666 Ohm 70V-1,33 kilo-Ohm /666 Ohm/326 Ohm 50V 666 Ohm/326 Ohm/166 Ohm 150~20 kHz 94 dB (1W/M) ABS resin

PST-120 D6321

Uni direction speaker 20W incl. 100V line transformer

Technical information: Input power: Output power: Speaker: Input voltage: Impedance:

Freq. response: S.P.L: Material:

RMS 20W 5, 10, 20W One 6.5” paper/plastic cone speaker 50, 70, 100V 100V - 2 kilo-Ohm, 1 kilo-Ohm, 500 Ohm 70V - 1 kilo-Ohm/ 500 Ohm/ 245 Ohm 50V - 500 Ohm/ 245 Ohm/125 Ohm 100~20 kHz 94 dB (1W/M) ABS resin

Bi-directional Projector Speakers

100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.

PST-215 D6322

Bi direction speaker 15W incl. 100V line transformer

Technical information: Input power: Output power: Speaker: Input voltage: Impedance:

Freq. response: S.P.L: Material:

RMS 15W 3.75, 7.5, 15W Two 5.5” paper/plastic cone speaker 50, 70, 100V 100V - 2,66 kilo-Ohm/ 1,33 kilo-Ohm /666 kilo-Ohm 70V - 1,33 kilo-Ohm /666 Ohm/326 Ohm 50V-666 Ohm/326 Ohm/166 Ohm 150~20 kHz 94 dB (1W/M) ABS resin

PST-220 D6323

Bi direction speaker 20W incl. 100V line transformer

Technical information: Input power: Output power: Speaker: Input voltage: Impedance:

Freq. response: S.P.L: Material:

162 01_02A_DAP_100V_10_temp2011.indd 162

100V Speakers

RMS 20W 5, 10, 20W Two 6.5” paper/plastic cone speaker 50, 70, 100V 100V - 2 kilo-Ohm/1 kilo-Ohm /500 Ohm 70V-1 kilo-Ohm/500 Ohm /245 Ohm 50V - 500 Ohm /245 Ohm/125 Ohm 100~20 kHz 94 dB (1W/M) ABS resin

[100V P.A. Systems] 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

Pendant Sphere Speakers

The pendant sphere loudspeakers will meet with most demands for interior decoration. It is suited for use in restaurants, bars, display space and shops.

SPT-205 D6340

Spherical speaker 20W incl. 100V line transformer

This splash waterproof loudspeaker is designed to be suspended from ceiling via its 5 m 6-core connecting cable that is easy to shorten to the desired height. The cable clamp-and ceiling cover match the pendant sphere. Their radiation pattern makes them ideal for use in buildings with a high ceiling such as superstores. We strongly recommend not to install them in windy environments. The pendant sphere loudspeakers will meet with most demands for interior decoration. It is suited for use in restaurants, bars, display space and shops. Technical information: Input power: Output power: Speaker: Input voltage: Input Impedance:

Freq. response: S.P.L: Material: Weight:

RMS 20W/Max. 40W 5, 10, 20W/8 Ohm 5” wide band speaker 70V, 100V 100V - 2 kilo-Ohm/1 kilo-Ohm /500 Ohm 70V - 1 kilo-Ohm/500 Ohm /245 Ohm/8 Ohm 110~13 kHz (-10 dB) 92 dB (1W/M) ABS resin 1,8 kg

SPT-205B D6341

Spherical speaker 20W incl. 100V line transformer

The 360° swivel metal bracket is designed to be installed on walls. The spherical loudspeaker can this way be used in many public address applications like; supermarkets, shopping malls, pubs and restaurants. Bracket included! The pendant sphere loudspeakers will meet with most demands for interior decoration. It is suited for use in restaurants, bars, display space and shops. Technical information: Input power: Output power: Speaker: Input voltage: Input Impedance:

Freq. response: S.P.L: Material: Weight:

RMS 20W/Max. 40W 5, 10, 20W/8 Ohm 5” wide band speaker 70V, 100V 100V - 2 kilo-Ohm /1 kilo-Ohm /500 Ohm 70V - 1 kilo-Ohm /500 Ohm/245 Ohm /8 Ohm 110~13 kHz (-10 dB) 92 dB (1W/M) ABS resin 1,8 kg

CSHDT-30

CSHDT-60

4” speakers • Metal-plated equipped with 100V /70V line input • Special fireproof design with iron fire dome (UL 203) • Iron Net resisting heat up to 130°C • Power output: REM 20W/Max. 30W

6,5” speakers • Metal-plated equipped with 100V /70V line input • Special fireproof design with iron fire dome (UL 203) • Iron Net resiting heat up to 130°C • Power output: REM 40W/Max. 60W

D6310

4” ceiling speaker 30W incl. trafo, firedome, mounting rails

Technical Information Speaker: 4” - 16 Ohm polypropylene woofer Output power: 70V - 3.7, 7.5, 15, 30W 100V - 7,5, 15, 30W, COM Impedance: 1,327 kilo-Ohm/656 Ohm /328 Ohm/164 Ohm Input voltage: 70V/100V Freq. response: 100 - 20 kHz S.P.L: 86 dB (1M/W)

Mounting: Connection:

Dog ear flip tabs Removable screw terminal w/loop through output Incl. Accessories: C-shaped support plate & Tile support rails Dimensions (DxP): 212 x 176 per cage 165 mm Net Weight: 3,5 kg

100V Speakers 01_02A_DAP_100V_10_temp2011.indd 163

D6311

6,5” ceiling speaker 60W incl. trafo, firedome, mounting rails

Technical Information Speaker: 6,5” - 16 Ohm polypropylene woofer Output power: 70V-7.5, 15, 30, 60W 100V-15, 30, 60W, COM Impedance: 656 Ohm /328 Ohm /164 Ohm /82 Ohm Input voltage: 70V/100V Freq. response: 100 - 20 kHz S.P.L: 92 dB(1M/W)

[100V P.A. Systems]

Mounting: Connection:

Dog ear flip tabs Removable screw terminal w/loop through output. Incl. Accessories: C-shaped support plate & Tile support rails Dimensions (DxP): 252 x 210 per cage 165 mm Cutting size ceiling hole diameter: 225 mm Net Weight (ea): 6,3 kg

163 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

CS-315

CS-420

15W Column Speaker. 3 x 5” loudspeaker including 100V line transformer. The wide range loudspeakers have a high efficiency paper cone. Equipped with a line transformer for 25V/70V/100V constant voltage systems, the sound power can be selected in 5 steps. It has an aluminium housing and metallic grille.

15W Column Speaker. 4 x 5” loudspeaker including 100V line transformer. The wide range loudspeakers have a high efficiency paper cone. Equipped with a line transformer for 25V/70V/100V constant voltage systems, the sound power can be selected in 5 steps. It has an aluminium housing and metallic grille.

D6352

Column speaker 15W, 3 x 5”, incl. 100V line transformer

Technical Information Input power: RMS 15W Output power: 1, 2, 3.75, 7.5, 15W Speaker: 3 wide band speakers (5 x 7” oval) and 1 high efficiency paper cone speaker Input voltage: 25, 70, 100V Impedance: 100V - 10 kilo-Ohm/5 kilo-Ohm /2,67 kilo-Ohm /1,33 kilo-Ohm /670 Ohm 70V - 4,9 kilo-Ohm /2,5 kilo-Ohm /1,3 kilo-Ohm /650 Ohm /320 Ohm 25V-625 Ohm /312 Ohm /166 Ohm /83,5 Ohm /41,5 Ohm

164 01_02A_DAP_100V_10_temp2011.indd 164

Frequency resp.: S.P.L: Material: IP: Dimensions: Weight:

180 Hz ~ 20 kHz (-10 dB) 97 dB (1W/M) Aluminium IP-44 169 x 112 x 669 mm (LxWxH) 3,8 kg

100V Speakers

D6353

Column speaker 20W, 4 x 5”, incl. 100V line transformer

Technical Information Input power: RMS 20W Output power: 1.25, 2.5, 5, 10, 20W Speaker: 4 wide band speakers (5 x 7” oval) and 2 high efficiency paper cone speakers Input voltage: 25, 70, 100V Impedance: 100V - 8 kilo-Ohm/4 kilo-Ohm /2 kilo-Ohm /1 kilo-Ohm/500 Ohm 70V - 3,9 kilo-Ohm/2 kilo-Ohm /1 kilo-Ohm/490 Ohm /245 Ohm/25V-500 Ohm /250 Ohm/125 Ohm /62.5 Ohm/31.3 Ohm

Frequency resp.: S.P.L: Material: IP: Dimensions: Weight:

160 Hz ~ 20 kHz (-10 dB) 98 dB (1W/M) Aluminium IP-44 indoor/outdoor 169 x 113 x 870 mm (LxWxH) 7,3 kg

[100V P.A. Systems] 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

CS-412

CS-720

12W Column Speaker. 4 x 2,5” loudspeaker including 100V line transformer. An advanced filtering provides a controlled directivity and wide frequency range at the same time. Equipped with a line transformer for 25V/70V/100V constant voltage systems, the sound power can be selected in 5 steps. It has an aluminium housing and metallic grille.

20W Column Speaker. 7 x 2,5” loudspeaker including 100V line transformer. An advanced filtering provides a controlled directivity and wide frequency range at the same time. Equipped with a line transformer for 25V/70V/100V constant voltage systems, the sound power can be selected in 5 steps. It has an aluminium housing and metallic grille.

D6350

Column speaker 12W, 4 x 3”, incl. 100V line transformer

Technical Information Input power: RMS 12W Output power: 1.5, 3, 6, 12W Speaker: 4 wide band speakers of 70 mm diameter (2.5” paper cone speaker) Input voltage: 25, 70, 100V Impedance: 100V - 6,6 kilo-Ohm /3,3 kilo-Ohm /1,66 kilo-Ohm /833 Ohm 70V - 3,26 kilo-Ohm /1,63 kilo-Ohm /816 Ohm /408 Ohm 25V - 416 Ohm /208 Ohm /104 Ohm /52 Ohm

Frequency resp.: S.P.L: Material: Dimensions: Weight:

250 Hz ~ 20 kHz (-10 dB) 94 dB (1W/M) Aluminium 106 x 75 x 405 mm (LxWxH) 2,5 kg

100V Speakers 01_02A_DAP_100V_10_temp2011.indd 165

D6351

Column speaker 20W, 7 x 3”, incl. 100V line transformer

Technical Information Input power: RMS 20W Output power: 2.5, 5, 10, 20W Speaker: 7 wide band speakers of 70 mm diameter (2.5” paper cone speaker) Input voltage: 25, 70, 100V Impedance: 100V - 4 kilo-Ohm /2 kilo-Ohm /1 kilo-Ohm/500 Ohm 70V - 2 kilo-Ohm/1 kilo-Ohm /500 Ohm/250 Ohm 25V - 250 Ohm/125 Ohm /62 Ohm/31 Ohm

[100V P.A. Systems]

Frequency Resp.: S.P.L: Material: IP: Dimensions: Weight:

250 Hz ~ 20 kHz (-10 dB) 94 dB (1W/M) Aluminium IP44 indoor/outdoor use 106 x 75 x 619 mm (LxWxH) 3,8 kg

165 07.03.11 09:20

100V Speakers 100 00VV P.P.A. A. Sys yste tems te ms

GS-515 D6361

GS-615

Garden Speaker 5â&#x20AC;? 15W

Technical Information Frequency response: Long term power: Line voltage: Sensitivity: Impedance: Loudspeaker: dimensions:

D6360

Garden Speaker 6â&#x20AC;? 15W

Technical Information Frequency response: Long term power: Line voltage: Sensitivity: Impedance: Loudspeaker: Dimensions:

130Hz - 16kHz 15 Watt 70 - 100V 93 dB 8 Ohm 5 inch 213 x 213 x 235 mm

LT-6 line transformer 100V/6W

120Hz - 16kHz 15 Watt 70 - 100V 94 dB 8 Ohm 6 inch 324 x 324 x 330 mm

LT-25 line transformer 100V/25W

D6400

D6401

Input voltage: Impedance: Output Impedance:

0, 70, 100V 100V - 6W (1,6 kilo-Ohm) 0, 4, 8, 16 Ohm

Input voltage: Impedance: Output Impedance:

0, 70, 100V 25W (400 Ohm) 0, 4, 8, 16 Ohm

100 Volt Volume Controllers

100V Line Volume control. Attenuation by transformer of 6W. Available models:

D6410

Volume Controller VC-6, 6W

D6411

Volume Controller VC-10, 10W

D6413

Volume Controller VC-30, 30W

Technical information: Model: Normal power: Controls: Input: Attenuation: Dimensions:

D6410 D6411 D6413 6W 10W 30W The Attenuator with transformer and with 11 positions and off 50V, 70V, 100V OFF, 3 dB 70 x 50 x 120 mm (LxWxH)

166 01_02A_DAP_100V_10_temp2011.indd 166

100V Speakers

[100V P.A. Systems] 07.03.11 09:20

Overview 100 00VV P.P.A. A. Sys yste tems te ms 100V Amplifiers MA15 MA15CD MA45CD PA90CDT PA100CD PA180 PA240 VPA-060 VPA-150 VPA-250 MXPA-80 MXPA-180 MPA-440 MPA-4150 MPA-4250

100V Hornspeakers

D6101

15W/4 Ohm PA Amplifier, 230V AC/12V DC

D6102

15W/4 Ohm Amplifier with CD/MP3 Player, 230V AC/12V DC

D6103

45W/100V Amplifier with CD/MP3 Player, 230V AC/12V DC

D6110

90W/100V Amplifier with CD/MP3 Player and Tuner, 230V AC/24V DC

D6111

100W/100V Amplifier with CD/MP3 Player, 230V AC

D6112

180W Amplifier with 4 Speaker Zone Controls, 230V AC

D6113

240W Amplifier with 4 Speaker Zone Controls, 230V AC

D4141

60W/100 Volt Power Amplifier

D4142

150W/100 Volt Power Amplifier

D4143

250W/100 Volt Power Amplifier

D6130

Multiplex professional PA Power Amplifier 80W

D6131

Multiplex professional PA Power Amplifier 180W

D6120

Multizone PA poweramplifier 4 x 40W

D6121

Multizone PA Power amplifier 4 x 150W

D6122

Multizone PA Power Amplifier 4 x 250W

100V Hornspeakers THD15 THD25 THD40 SHD25 SHD35 SHD40 PSH10T PSH15T PSH30T TH10T TH15T TH30T TH12 TH16 TH20 SH15

D6201

Round speaker horn 15W, 8 Ohm

D6202

Round speaker horn 25W, 8 Ohm

D6203

Round speaker horn 40W, 8 Ohm (complete assembled)

D6206

Square horn speaker, 25W, 8 Ohm

D6207

Square horn speaker, 35W, 8 Ohm

D6208

Square horn speaker, 40W, 8 Ohm (complete assembled)

D6211

ABS square horn speaker, 10W, 100V

D6212

ABS square horn speaker, 15W, 100V

D6213

ABS square horn speaker, 30W, 100V

D6216

IP66 Round speaker horn 10W, 100V

D6217

IP66 Round speaker horn 15W, 100V

D6218

IP66 Round speaker horn 30W, 100V

D6221

Round trumpet horn 30 cm diameter

D6222

Round trumpet horn 40 cm diameter

D6223

Round trumpet horn 50 cm diameter

D6224

Square trumpet horn 38 x 23 cm

Overview 01_02A_DAP_100V_10_temp2011.indd 167

HD35T HD60T HD80T SVC35 SVC40 SVC15 SVC30 SVC60 SVC100

D6226

Driver 35W, 100V transformer

D6227

Driver 60W, 100V transformer

D6228

Driver 80W, 100V transformer

D6233

Spare voice coil for TH15T, SHD25, SHD35, THD25

D6234

Spare voice coil for TH40, SHD40

D6231

Spare voice coil for TH10T, PSH10T, PSH15T

D6232

Spare voice coil for TH30T, PSH30T

D6235

Spare voice coil for SHD35 & HD60T

D6236

Spare voice coil for HD80T

100V Speakers PR-32T PR-32T PR-52T PR-52T PR-62T PR-62T PR-82T PR-82T PMT-42 PMT-42 PMT-62 PMT-62 PMT-82 PMT-82 CST-510 CST-515 CST-610 CST-615 CST-6506 CSE-610 E CSE-506 E CST-6512 CST-6520 CST-206 CST-206 PST-115 PST-120 PST-215 PST-220 SPT-205 SPT-205B CSHDT-30 CSHDT-60 CS-315 CS-420 CS-412 CS-720 GS-615 GS-515

D3531

15W - This set contains 2 pcs. Black

D3532

15W - This set contains 2 pcs. White

D3533

15W - This set contains 2 pcs. Black

D3534

15W - This set contains 2 pcs. White

D3535

30W - This set contains 2 pcs. Black

D3536

30W - This set contains 2 pcs. White

D3537

30W - This set contains 2 pcs. Black

D3538

30W - This set contains 2 pcs. White

D3820B Moulded Speakers - 2 pcs, Black D3820W Moulded Speakers - 2 pcs, White D3822B Moulded Speakers - 2 pcs, Black D3822W Moulded Speakers - 2 pcs, White D3823B Moulded Speakers - 2 pcs, Black D3823W Moulded Speakers - 2 pcs, White D6260

5,5” ceiling speaker 10W incl. 100V line transformer, firedome

D6261

5,5” ceiling speaker 15W incl. 100V line transformer, firedome

D6270

6,5” ceiling speaker 10W incl. 100V line transformer, firedome

D6271

6,5” ceiling speaker 15W incl. 100V line transformer, firedome

D6280

6,5” ceiling speaker quickmount 6W incl. 100V line transformer

D6290

6” Economical Ceiling Speaker 6-10W

D6291

5” Economical Ceiling Speaker 3-6W

D6281

6,5” ceiling speaker quickmount 12W incl. 100V line transformer

D6282

6,5” ceiling speaker quickmount 20W incl. 100V line transformer

D6250W White 2,5” ceiling speaker 6 W incl. 100V line transformer D6250G Gold 2,5” ceiling speaker 6 W incl. 100V line transformer D6320

Uni direction speaker 15W incl. 100V line transformer

D6321

Uni direction speaker 20W incl. 100V line transformer

D6322

Bi direction speaker 15W incl. 100V line transformer

D6323

Bi direction speaker 20W incl. 100V line transformer

D6340

Spherical speaker 20W incl. 100V line transformer

D6341

Spherical speaker 20W incl. 100V line transformer

D6310

4” ceiling speaker 30W incl. trafo, firedome, mounting rails

D6311

6,5” ceiling speaker 60W incl. trafo, firedome, mounting rails

D6352

Column speaker 15W, 3 x 5”, incl. 100V line transformer

D6353

Column speaker 20W, 4 x 5”, incl. 100V line transformer

D6350

Column speaker 12W, 4 x 3”, incl. 100V line transformer

D6351

Column speaker 20W, 7 x 3”, incl. 100V line transformer

D6360

Garden Speaker 6” 15W

D6361

Garden Speaker 5” 15W

[100V P.A. Systems]

167 07.03.11 09:20

Speakercomponents Har ardw dwar dw aree ar DD-1 driver D3188 Freq. Range: Impedance: Music Power: Power rating: SPL (1W/1m): Dimensions: Mounting depth: Weight:

VC-1 driver Voice coil for DD-1 1800-20 kHz 8 Ohm 250W 150W 106 dB 110 x 74 mm 59 mm 1,45 kg

D3183 Dimensions: Mounting Depth: Weight:

80 x 37 mm 25 mm 0,1 kg

DP-8 Piezo Driver 8 cm

DP-12 Piezo Driver 12 cm

D3119 Freq. Range: Voltage: Max. Power: 4 Ohm System: 8 Ohm System: SPL (1W/1 m): Mounting depth: Dimensions: Weight:

D3142 Freq. Range: Voltage: Max. Power: 4 Ohm System: 8 Ohm System: SPL (1W/1 m): Mounting depth: Dimensions: Weight:

1800 - 20 kHz 35V~ 150W 100W 93 dB 42 mm 65 x 65 mm 200 g

1800 - 20 kHz 35V~ 150W 100W 93 dB 65 mm 100 x 75 mm 200 g

HP-1 Horn 110 x 265 mm, fits to DP-8 or DP-12

HP-2 Horn 129 x 386 mm, fits to DP-8 or DP-12

D3117 Baffle cut-out: Mounting depth: Dimensions: Weight:

D3118 Baffle cut-out: Mounting depth: Dimensions: Weight:

85 x 233 mm 164 mm 110 x 265 mm 200 g

HP-3 Horn 177 x 354 mm, fits to DP-8 or DP-12

HP-4 Horn

D3130 Baffle cut-out: Mounting depth: Dimensions: Weight:

D3129 Dimensions: Baffle cut-out: Mounting depth: Weight:

143 x 323 mm 205 mm 354 x 205 x 178 mm 600 g

100 x 350 mm 155 mm 129 x 386 mm 520 g

245 x 465 mm 200 x 420 mm 295 mm 0,95 kg

P-1 Piezo Tweeter

P-2 Piezo Tweeter with horn

D3115 Freq. Range: Voltage: 4 Ohm System: 8 Ohm System: SPL (1W/1 m): Baffle cut-out: Mounting depth: Dimensions: Weight:

D3116 Freq. Range: Voltage: 4 Ohm System: 8 Ohm System: SPL (1W/1 m): Baffle cut-out: Mounting depth: Dimensions: Weight:

4000 - 20 kHz 35V 150W 100W 92 dB 74 mm 70 mm 85 x 85 mm 80 g

1800-20 kHz 35V 150W 100W 92 dB 52 x 140 mm 100 mm 80 x 186 mm 120 g

Speakergrill

Technical information:

D5405 :

Available models:

D5405 D5404 D5403 D5402 D5401

inner Ø : outer Ø :

6” 8” 10” 12” 15”

D5404 :

inner Ø : outer Ø :

D5403 :

inner Ø : outer Ø :

D5402 :

inner Ø : outer Ø :

D5401 :

inner Ø : outer Ø :

168 01_03_DAP_Hardware_10_temp2011.indd 168

Speakercomponents

135 mm 160 mm 175 mm 205 mm 235 mm 260 mm 285 mm 310 mm 360 mm 386 mm

[Hardware] 07.03.11 10:16

Speakercomponents Har ardw dwar dw aree ar MB-8 Speaker D3111 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

MB-10 Speaker 8 Ohm 90 - 7000 Hz 4000 Hz 100W 75W 97 dB 203 mm 184 mm 75 mm 1,26 kg

D3112 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

8 Ohm 60 - 4500 Hz 2000 Hz 175W 125W 97 dB 255 mm 232 mm 105 mm 2,2 kg

MB-12 Speaker

MB-15 Speaker

D3113 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

D3114 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

8 Ohm 40 - 4000 Hz 2000 Hz 300W 200W 98 dB 306 mm 280 mm 115 mm 2,84 kg

8 Ohm 40 - 4000 Hz 1000 Hz 350W 250W 101 dB 385 mm 353 mm 129 mm 3,84 kg

MB-15B Speaker

AB-12 Speaker

D3182 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

D3144 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut out: Mounting depth: Weight:

8 Ohm 35 - 4000 Hz 1000 Hz 500W 300W 102 dB 385 mm 349 mm 144 mm 5,14 kg

8 Ohm 35 - 4000 Hz 1000 Hz 500W 300W 102 dB 310 mm 280 mm 115 mm 4,8 kg

AB-15 Speaker

PCX-1 Passive Crossovers

D3145 Impedance: Freq. Range: Crossover freq.: Music power: Power rating: SPL (1W/1 m): Dimensions: Baffle cut-out: Mounting depth: Weight:

D3191 Bass crossover 500 Hz/12 dB, max. 300W

8 Ohm 35 - 4000 Hz 1000 Hz 600W 400W 103 dB 390 mm 350 mm 145 mm 7,58 kg

PCX-2 Passive Crossovers

PCX-3 Passive Crossovers

D3192 Bass crossover 300 Hz/12 dB, max. 300W

D3193 2-Way crossover 4500 Hz/6/18 dB, max. 300W

PCX-4 Passive Crossovers

PCX-5 Passive Crossovers

D3194 3-Way crossover 800 Hz - 6000 Hz/12 dB, max. 300W

D3195 3-Way crossover 500 Hz - 4500 Hz/12 dB, max. 300W

Speakercomponents 01_03_DAP_Hardware_10_temp2011.indd 169

[Hardware]

169 07.03.11 10:17

Speakerstands Har ardw dwar dw aree ar Eco Speakerstand 35 mm

Technical information:

D8320

NEW PRODUCT

D8322

NEW PRODUCT

170 01_03_DAP_Hardware_10_temp2011.indd 170

Technical information:

D8321

Speakerstand Pro 38-41 mm

Speakerstand 35-38 mm

NEW PRODUCT

Technical information:

Wind Up Speaker Stand

Technical information:

D8323

NEW PRODUCT

Speakerstands

[Hardware] 07.03.11 10:17

Speakerstands Har ardw dwar dw aree ar Speaker Stand D8401C

Speaker Stand set D8425

bag

Technical information:

Aluminium 1,1-1,86 m/ 20 kg

Speaker Stand D8409B

Technical information:

Black 1,34 - 2,08 m/ 30 kg

Technical information:

Max. Load: Diameter: Length: Weight:

Weight: Max. Load: Diameter: Length:

20 kg 35 mm Max. 1,86 m 1,64 kg

Technical information:

Incl. Speakercable and carrying

Air Pressure Speaker Stand

6,44 kg 30 kg 35 mm Max. 2,08 m

Technical information:

D8426

A complete set to connect and mount your speakers. The set comes including two speaker stands, 2 speaker cables with 2 pole speaker connectors and 6 meter 2x 1,5mm2 cable and a carrying bag.

Technical information:

Tube size: Min. height: Max. height: Leg length:

Height: Load Capacity: Material: Safety: Tube Diameter:

35 mm 1250 mm 1850 mm 680 mm

Speakerstands 01_03_DAP_Hardware_10_temp2011.indd 171

[Hardware]

1300 - 1900 mm 40 kg Aluminium Snap Lock Holder 35 mm

171 07.03.11 10:17

Speakerstands Har ardw dwar dw aree ar Wind up speakerstand M20 Thread

Technical information:

Speaker Stand Set D8324

D8427

NEW PRODUCT

Technical information:

Incl. Bag

Technical information: Thread: M20 Tube diameter: 35mm Colour: Black Material: Metal Minimum height: 84 cm Maximum height: 142 cm Maximum load: 38 kg

172 01_03_DAP_Hardware_10_temp2011.indd 172

Speakerstands

[Hardware] 07.03.11 10:17

Speakerstand-Accessories Har ardw dwar dw aree ar Inner Adapter Metal

Inner Adapter Alu.

Inner adapter 35 mm, mounting Ø110 mm

Inner adapter 38 mm, mounting Ø110 mm

35 mm

Flying Eye

Distance tube

D5505

Small

D8428

Outer Adapter Plastic

D5506

D8418

D8404

Big

Bottom screw fitting

180 x 120 mm, outer adapter

D5502

D8405

With M-20 thread 0,91 - 1,46

105 x 105 mm

Measurements:

Speakerstand Tilt Adapter D8420

Tilt adjustable from 0° until 15° for speaker stands with 36 mm tube diameter. Secured by 2 handknobs. Technical information:

D8420 :

Weight: Height:

0,5 kg 235 mm

Speaker Wall Bracket D8415

25 Kg

Measurements:

Adjustable Speakerbracket D8412

50 kg

Measurements:

Speakerstand-Accessories 01_03_DAP_Hardware_10_temp2011.indd 173

Adjustable Speakerbracket D8413

30 kg

Measurements:

[Hardware]

173 07.03.11 10:17

Microphonestands Har ardw dwar dw aree ar

Eco Microphones stand with Pro Microphone stand with telescopic boom telescopic boom D8301

NEW PRODUCT

Technical information:

174 01_03_DAP_Hardware_10_temp2011.indd 174

D8304

normal

NEW PRODUCT

Technical information:

Microphonestands

[Hardware] 07.03.11 10:17

Microphonestands Har ardw dwar dw aree ar

Pro Microphone stand with telescopic boom D8305

short

Technical information:

NEW PRODUCT

Microphone pole le with ith coun- Microphone stand for overtrweight head Technical information:

Microphonestands 01_03_DAP_Hardware_10_temp2011.indd 175

NEW PRODUCT

D8306

[Hardware]

D8307

NEW PRODUCT

Technical information:

175 07.03.11 10:17

Microphonestands Har ardw dwar dw aree ar Microphone Stand Ergo1

Technical information:

D8111B

Desk Mic. Stand

Straight, Chrome, 20 cm/1,5 kg, + adj. Gooseneck D8203C

176 01_03_DAP_Hardware_10_temp2011.indd 176

Microphone Stand Ergo2

Technical information:

D8112B

Technical information:

Height: 905-1600 mm Arm Length: 580-900 mm Base: Metal Two section boom-arm. Ergonomic rubber grips

Height: 415-660 mm Arm Length: 580-890 mm Base: Metal Two Section boom-arm Ergonomic rubber grips

Desk Mic. Stand, Gooseneck D8201C

Chrome, 30 cm/1 kg

Desk Mic. Stand Straight, Adj. D8202C

Microphonestands

Chrome, 37 cm/0,8 kg

Desk Mic. Stand D8204C

Boomarm

Chrome, 1,5 kg, + adj.

[Hardware] 07.03.11 10:18

Microphonestands Har ardw dwar dw aree ar Mic. Stand 160 cm

Technical information:

Chrome, 96-160 cm, adj. Boomarm 53-93 cm + Baseplate, 3 kg D8105C

Quick Lock Microphone Stand

Technical information:

D8115B min. 1020mm - max. 1670mm length, 2,4 kg

160cm

Technical information:

Technical information: Min. length: Max. length: Weight:

Mini Desk Mic. Stand D8205C

Chrome, 15-20 cm

Mini Desk Mic. Stand D8206C

Microphonestands 01_03_DAP_Hardware_10_temp2011.indd 177

Chrome, 15 cm

[Hardware]

1020 mm 1670 mm 2,4 kg

Mini Desk Mic. Stand D8207C

Chrome, 8 cm

177 07.03.11 10:18

Microphonestands Har ardw dwar dw aree ar Broadcasting Stand

Technical information:

D8110

Gooseneck 30 cm D8901B D8901C

Black Chrome

XLR Gooseneck 30 cm D8906B D8906C

Female/Male, Black Female/Male, Chrome

Gooseneck 40 cm D8902B D8902C

Black, screw Chrome, screw

XLR Gooseneck 40 cm D8907B D8907C

Female/Male, Black Female/Male, Chrome

Guitar cabinet mic clamp D8121

â&#x20AC;˘ Allows precisive mic positioning.

NEW PRODUCT

178 01_03_DAP_Hardware_10_temp2011.indd 178

Microphonestands

[Hardware] 07.03.11 10:18

Mic.stand-Accessories Har ardw dwar dw aree ar Microphone holder D8940

28 mm

Microphone holder D8944

Spring

Microphone Holder D8927

3/8 and 5/8 Thread ø 25 mm

Snap Clamp Basic D8981

Clamp for drums, amps, etc.

Microphone holder D8941

22 mm

Microphone Holder D8924

5/8 Thread ø 25 mm

Microphone holder D8945

Anti-Shock

Microphone Holder D8920

5/8 Thread ø 22 mm, flexible

Mic. T-bar D8962

Multi-purpose clamp for drums, amps, etc. D8982

Double Goose Snap Clamp 120 D8986

With 120 mm gooseneck

D8942

32 mm Flexible

Microphone Holder D8925

5/8 Thread ø 28 mm

Shockmount D8923

Microphone Clamp D8921

D8961

Goose Snap Clamp 80 D8983

With 80 mm gooseneck

5/8 Thread

For 2 Microphones

With 120 mm gooseneck

Mounting Plate 60 mm for Gooseneck D8911B

Black

D8911C

D8943

Microphone Holder D8926

5/8 Thread ø 25 mm

D8987

Microphone Holder D8922

D8963

5/8 Thread ø 30 mm, flexible

For 1 Microphone

Double Goose Snap Clamp 80 D8985

With 80 mm gooseneck

Thread Adapter Chrome

D8951 D8952 D8953

Mic.stand-Accessories 01_03_DAP_Hardware_10_temp2011.indd 179

22 mm Flexible

Mic. adapter clamp

Goose Snap Clamp 120 D8984

Microphone holder

Snap Clamp for Standmounting

With 5/8 Thread

Mic. T-bar

For 4 Microphones

Double Snap Clamp

Microphone holder

[Hardware]

From 5/8 to 3/8 From 3/8 to 5/8 Inner Mounting From 3/8 to 5/8

179 07.03.11 10:18

Stand Miscellaneous Har ardw dwar dw aree ar

NEW PRODUCT

Eco Music Stand D8350

Incl bag

Technical information:

NEW PRODUCT

Music Stand D8351

Incl Bag

Technical information:

NEW PRODUCT

Music Stand Pro D8352

Technical information:

Combo-Amp.Stand D8555

180 01_03_DAP_Hardware_10_temp2011.indd 180

Stand Miscellaneous

Heavy Duty Max. 20 kg

[Hardware] 07.03.11 10:19

Stand Miscellaneous Har ardw dwar dw aree ar Equipment Stand D8551

Mixer Shelf with Wheels

Adjustable

D8560

Keyboard Bench Pro

NEW PRODUCT

D8362

Rackstand Stand

NEW PRODUCT

D8372

Technical information:

Combo-Amp. Stand D8554

Max. 10 kg

Foot stand Guitar Player D8373

Technical information:

NEW PRODUCT

Stand for acoustic Guitar D8374

NEW PRODUCT

Stand for electric Guitar D8375

NEW PRODUCT

Weight: 1,62 kg

Stand Miscellaneous 01_03_DAP_Hardware_10_temp2011.indd 181

[Hardware]

181 07.03.11 10:19

Stand Miscellaneous Har ardw dwar dw aree ar Keyboard Stand Double Layer D8360

Rackstand / Keyboard Stand D8371

NEW PRODUCT

Keyboard Stand With 2 levels D8504 Dimensions: Max load: Weight:

182 01_03_DAP_Hardware_10_temp2011.indd 182

Stand Miscellaneous

240 min./ 825 max. x 660 mm (LxW) 22 kg 7,6 kg

[Hardware] 07.03.11 10:19

Stand Miscellaneous Har ardw dwar dw aree ar

Professional keyboard stand D8507

NEW PRODUCT

This keyboard stand is compact to transport, easy to setup and looks very stylish instead of the usual stands. It can hold 2 keyboards in adjustable heights. The feet are inside the column and the tri-bar arms can also be folded into the column. At the top of the column is a microphone adapter that can be used to mount a gooseneck. Technical information:

D8507 : Maximum load: 30Kg on each keyboard layer Weight: 7,75 Kg Measurements folded: 1105 x 120 x 150 mm (HxWxD)

Keyboard Stand Ergo1

Keyboard Stand Ergo2

D8505 Height: 570 - 980 mm Arm Length: 400 mm (diameter 28 mm) Material: Steel Max load: 30 kg Easy locking and height adjust system. For small / medium keyboards.

D8506 Height: 5700 - 975 mm Arm Length: 400 mm (diameter 28 mm) Transport length: 997 mm (stand folded) Material: Steel Max load: 30 kg Easy locking and height adjust system. For medium/big keyboards.

Stand Miscellaneous 01_03_DAP_Hardware_10_temp2011.indd 183

[Hardware]

183 07.03.11 10:19

Gear Racks Har ardw dwar dw aree ar

Metal Equipment-Racks • 19 inch Professional Equipment Rack • 1.2 mm mat powder coated metal frame body • Strong double mounting rail on front and backside • Ventilation: side covers • 4 rubber feet and 4 swivel wheels included • Disassembled packing (carton + woodbox protection) Available models:

D7600

12U (560 x 460 x 645 mm),

18 kg

D7601

16U (560 x 460 x 825 mm),

22,5 kg

D7602

20U (560 x 460 x 1000 mm), 26 kg

D7603

24U (560 x 460 x 1180 mm), 29 kg

D7604

28U (560 x 460 x 1365 mm), 31,5 kg

D7605

32U (560 x 460 x 1545 mm), 34,5 kg

D7606

36U (560 x 460 x 1750 mm), 37 kg

D7607

40U (560 x 460 x 1900 mm), 39,5 kg

184 01_03_DAP_Hardware_10_temp2011.indd 184

Gear Racks

[Hardware] 07.03.11 10:19

Gear Racks Har ardw dwar dw aree ar

Pro Metal Equipment Rack Series • 19 inch Professional Equipment Rack • 1 Organic glass door, 3 metal sides with ventilation 1,2mm • 1.5 mm mat powder coated metal frame body • Strong double mounting rail on front and backside • 4 rubber feet and 4 swivel wheels included • Disassemble packing (carton + woodbox protection) Available models:

D7620

12U (585 x 585 x 655 mm),

30 kg

D7621

16U (585 x 585 x 955 mm),

33,5 kg

D7622

20U (585 x 585 x 1130 mm),

40 kg

D7623

24U (585 x 585 x 1310 mm),

47,5 kg

D7624

28U (585 x 585 x 1490 mm),

53 kg

D7625

32U (585 x 585 x 1675 mm),

61 kg

D7626

36U (585 x 585 x 1850 mm),

70 kg

D7627

40U (585 x 585 x 2020 mm),

85 kg

Gear Racks 01_03_DAP_Hardware_10_temp2011.indd 185

[Hardware]

185 07.03.11 10:19

Gear Racks Har ardw dwar dw aree ar

19” Server Cabinet

19” Server Cabinet Available models:

Available models:

D7630

Glass Door 18U, 600 x 815 x 995mm (LxWxH)

D7640

Mesh Door 18U, 600 x 815 x 995mm (LxWxH)

D7631

Glass Door 22U, 600 x 815 x 1175mm (LxWxH)

D7641

Mesh Door 22U, 600 x 815 x 1175mm (LxWxH)

D7632

Glass Door 32U, 600 x 815 x 1625mm (LxWxH)

D7642

Mesh Door 32U, 600 x 815 x 1625mm (LxWxH)

D7633

Glass Door 42U, 600 x 815 x 2075mm (LxWxH)

D7643

Mesh Door 42U, 600 x 815 x 2075mm (LxWxH)

19” Wallmount Server Available models:

186 01_03_DAP_Hardware_10_temp2011.indd 186

Gear Racks

D7650

Cabinet 9U, 600 x 600 x 500mm (LxWxH)

D7651

Cabinet 15U, 600 x 600 x 770mm (LxWxH)

[Hardware] 07.03.11 10:19

Gear Racks Har ardw dwar dw aree ar 1U Digital Temperature Unit D7680

1U Digital Temperature Unit. 1U Unit Digitale Temperature Unit which measures the temperature in your rack and can switch on off external fans (not included) by the programmable temperatures. Including external temperature sensor. Technical information: Temperature Range: Input: Output: Power: Voltage: Size:

0-50 degrees PTC (10kOhm) (included) 2x IEC female connector 3W 230V 19” 1U

1U Fan Unit D7681

control

with 4 fans and temperature

1U Digital Temperature Unit. 1U Unit Digitale Temperature Unit which measures the temperature in your rack and can switch on and off the four build in fans by the programmable temperature settings. Including external temperature sensor. Technical information: Temperature Range: Input: Power: Voltage: Size:

0-50 degrees PTC (10kOhm) (included) 3W 230V 19” 1U

19” 3U Switch Box D7889

A 19” 3U mounting box to mount all your switches and circuitbreakers on a DIN rail. Height: Size: Weight: Finishing:

19” 6 way socketbox D7682

19” 6 way socketbox

Schuko socket, 1,5 U

D7683

Shelf fixed for 19” Server Rack D7684

D7685

D7617 Measurements: 43 x 455 x 420 (HxWxD) Material: 1,5 mm Steel, Black powder Weight: 2,7 Kg

D7687

NEW PRODUCT

2U Shelf for Metal Racks D7618

NEW PRODUCT

Measurements: 86 x 455 x 420 (HxWxD) Material: 1,5 mm Steel, Black powder Weight: 3 Kg

Gear Racks 01_03_DAP_Hardware_10_temp2011.indd 187

Cable entry with brush

1U Shelf for Metal Racks

BS-613 (UK) socket, 1,5 U

Shelf sliding for 19” Server Rack

Adjustable keyboard drawer D7686

3U 484 x 135 x 65 mm (LxWxH) 1,81 kg Black powder coating (matt)

[Hardware]

187 07.03.11 10:19

19 inch Hardware Har ardw dwar dw aree ar 19 inch Blindpanel Black Availlable models:

D7801 D7802 D7803 D7804

1U 2U 3U 4U

19 inch Ventilationpanel Black Availlable models:

D7806

D7807

19 inch Ventilationpanel Alu Availlable models:

19 inch Blindpanel Alu Availlable models:

D7850 D7851 D7852 D7853

1U 2U 3U 4U

D7854

D7855

19 inch Ventilationpanel Blue Availlable models:

D7864

D7865

19 inch Connector-panel Availlable models:

D7811 D7812

19 inch Blindpanel Blue Availlable models:

D7860 D7861 D7862 D7863

1U, for 8 XLR Connectors (D-Size) 2U, for 16 XLR Connectors (D-Size)

19 inch Multi-connector-panels 2U D7816

1U 2U 3U 4U

For 2 x 16 pin multiconnectors

19 inch Coverbox 3U D7817

Protectionpanel Availlable models:

D7870 D7871 D7872 D7873

19”/1U 19”/2U 19”/3U 19”/4U

188 01_03_DAP_Hardware_10_temp2011.indd 188

For 6 x PG16 & 6 x PG21

Protectionpanel With Locker Availlable models:

D7866 D7867 D7868 D7869

19 inch Hardware

19”/1U 19”/2U 19”/3U 19”/4U

[Hardware] 07.03.11 10:20

19 inch Hardware Har ardw dwar dw aree ar PowerPanel 1 51000

19” Panel for 12 pieces D-size with coding

Technical information: 19” rack mount/1U 12 holes to fit Neutrik Powercon or Speakon socket (not included) Black epoxy-powder finish 48 pieces marking stickers included

PowerPanel 2 51001

19” Panel with 2 pieces Socapex and cabling left

Technical information: 19”rack mount/ 2HE 4 holes to fit socapex (19-pin) socket Includes 2 pre-wired socapex connectors Each connector is fully wired with 19 x 2 meter cables 8 Pieces marking plate included Black epoxy-powder coating

PowerPanel 3 51002

19” Panel with 4 pieces Socapex and cabling left

Technical information: 19”rack mount/ 2HE 4 holes to fit socapex (19-pin) socket Includes 4 pre-wired socapex connectors Each connector is fully wired with 19 x 2 meter cables 8 Pieces marking plate included Black epoxy-powder coating

PowerPanel 4 51003

19” Panel with 6 pieces CEE 3 pin 16A connector

Technical information: 19” rack mount/2U 6 x CEE 16A 3-pin female socket Black epoxy powder finish 48 pieces marking plate included Cables included

PowerPanel 5 51004

19” Panel with 6 pieces BS-13 connector

Technical information: 19” rack mount/2U 6 x 13A 3-pin BS 1363 female socket Black epoxy-powder finish Fittings included 48 pieces marking plate included Cables included

PowerPanel 6 51005

19” Panel with 6 pieces BS-15 connector

Technical information: 19” rack mount/2U 6 x 15A 3-pin BS 546 female socket Black epoxy powder finish Fittings included 48 pieces marking plate included Cables included

19 inch Hardware 01_03_DAP_Hardware_10_temp2011.indd 189

[Hardware]

189 07.03.11 10:20

19 inch Hardware Har ardw dwar dw aree ar MP-1 D7701

Masterpanel excl. Rear Cover

Technical information: 19â&#x20AC;? 2U 1,5 mm steel, black powder coated incl. 20 screws

Rear Cover D7702

For master panel 2U

Technical information: 19â&#x20AC;? 2U 65 mm deep

D-Size panel D7716

1 segment

Ventilation panel 2 segments D7710

2 segment x 2U

Speakon panel 2 segments D7728

6 pole, 2 segments

CEE 16 Amp panel 2 segments D7725

3 Pin

Blank panel D7706

D7717

1 segment

190 01_03_DAP_Hardware_10_temp2011.indd 190

2 segments

Jack panel D7711

2 x Jack, 1 segment

Socapex panel 2 segments D7727

Multiconnector panel D7734

D-Size panel

Male/Female

Multiconnector panel D7733

10 pole, 4 segments

IEC panel 1 segment D7721

Male

Jack panel D7712

4 x Jack, 2 segments

Chassis panel 2 segments D7723

Bulgin

Multiconnector panel D7732

16 pole, 4 segments

IEC panel 1 segment D7722

Female

Jack panel D7713

6 x Jack, 2 segments

Chassis panel 2 segments D7724

Schuko

Multiconnector panel D7731

24 pole, 4 segments

CEE 16 Amp panel 2 segments D7726

5 Pin

Blank panel D7707

2 segments

Blank panel D7708

19 inch Hardware

4 segments

[Hardware] 07.03.11 10:20

19 inch Hardware Har ardw dwar dw aree ar 19 inch Drawer D7831 D7832 D7833

1U 2U 3U

19 inch Mountingpanel D7821 D7822 D7823

For non-19” Equipment, 1U For non-19” Equipment, 2U For non-19” Equipment, 3U

19 Inch Drawer with keylock D7840 D7841 D7842 D7843 D7844

1U (483 x 350 x 44 mm, LxWxH)/5,7 kg 2U (483 x 350 x 88 mm, LxWxH)/6,7 kg 3U (483 x 350 x 132 mm, LxWxH)/7,7 kg 4U (483 x 350 x 176 mm, LxWxH)/8,7 kg 6U (483 x 350 x 267 mm, LxWxH)/10,5 kg

Blindcap for D Hole D7881

M6 Screw 20 mm D7883

Black

D7884

Nickel

Mounting Set

10 x Screwbolt, nut and protectionring

D8011 100 x Screwbolt, nut and protectionring

D8010

M6 Plastic Protection Ring D7885 Mounting Set:

10 x Screw bolt, nut and protection ring

Weight net: (10 x mounting set in poly bag): 0,15 kg Weight gross (carton 80x poly bag): 8 kg

Laptop Stand D8370

NEW PRODUCT

19 inch Keyboard-drawer D7830

19 inch Hardware 01_03_DAP_Hardware_10_temp2011.indd 191

Mounting Set: 100 x Screw bolt, nut and protection ring Weight net: (100 x mounting set in carton box): 1,5 kg

Panel for Computer Keyboard

[Hardware]

191 07.03.11 10:21

Flightcase Hardware Har ardw dwar dw aree ar Egg Foam Set of 2 sheets of 1,5mx2m D6901

D6902

Eggfoam, grey 30 mm. thick Size of sheet 1500 x 2000 mm. One package contains 2 sheets.

Pearl Foam 20mm Sheet: 1m x 1.3m D6903

Softfoam, grey 20 mm. thick Size of sheet 1500 x 2000 mm.

Hard Foam 10mm Sheet: 1,15m x 1.5m D6904

Pearlfoam. Grey 20 mm. thick Ideal to glue multiple layers together to customize your flightcase. Size of sheet 1000 x 1300 mm.

Sliding Profile for Flightcase Length: 2m D6900 Material: Dimensions:

Soft Foam 20mm Sheet: 1,5mx2m

Hard Foam. Grey 10 mm. thick Ideal to glue multiple layers together to customize your flightcase. Size of sheet 1150 x1500 mm.

Blue Wheel, 100 mm D8001

Swivel, without brake

Blue Wheel, 100 mm D8002

Swivel, with brake

Aluminium 3,5 x 1,8 x 200 cm

Blue wheel without brake 100 mm Weight net (1 pcs): 1,1 kg Weight gross (carton 20 pcs): 24 kg

192 01_03_DAP_Hardware_10_temp2011.indd 192

Flightcase Hardware

Blue wheel with brake 100 mm Weight net (1 pcs): 1,3 kg Weight gross (carton 12 pcs): 15,9 kg

[Hardware] 07.03.11 10:21

Flightcase Hardware Har ardw dwar dw aree ar Butterfly Lock Large D5120

NEW PRODUCT

Fliphandle D5129

Butterfly Lock 80x80mm D5121

NEW PRODUCT

Flightcase Lock Small

NEW PRODUCT

D5122

Fliphandle 140x84mm Polish D5128

NEW PRODUCT

LED Snakelight Blue/White 60729

4x blue LED’s, 4x white LED’s

Make your LED gooseneck light more versatile with this special head. It has two colours LED built-in as well a switch which makes it possible to switch your gooseneck light into Blue colour, White colour or mixed colour.

LED Minilight USB Available models:

LED Minilight XLR Available models:

60720

Gooseneck lamp with White LED

60722

Gooseneck lamp with White LED

60721

Gooseneck lamp with Blue LED

60723

Gooseneck lamp with Blue LED

Flexible gooseneck LED light. It’s handy for notebook or computer users to work in dimly lit areas.

Flexible gooseneck lamp. It is bright enough for DJ & professional users to work in dimly lit areas

Technical information:

4 Led’s Length: Beam: Voltage:

4 Led’s Length: Voltage: Power: Connection:

Connection:

18” flexible angle runs on DC5 voltage at 20 mA current with USB connector

LED Minilight BNC Available models:

12” 12V DC 12V at 400 mA - 450 mA, 5W 3P XLR type

LED Minilight Set Deskmount Available models:

60724

Gooseneck lamp with White LED

60730

White LED

60725

Gooseneck lamp with Blue LED

60731

Blue LED

Flexible gooseneck lamp. It is bright enough for DJ & professional users to work in dimly lit areas

220V, Dimmer On/Off Switch

Technical information:

4 Led’s Length: Voltage: Power: Connection:

4 Led’s Voltage: Power:

12” 12 Volts 12V at 400 mA - 450 mA, 5W BNC

Flightcase Hardware 01_03_DAP_Hardware_10_temp2011.indd 193

12V 12V at 400 mA 5W

[Hardware]

193 07.03.11 10:21

Gear & Rack Lights Har ardw dwar dw aree ar 19” Rackmount LED Minilight with dimmer Available models:

60740

White LED

60741

Blue LED

19” (1U) Rack lighting with double gooseneck LED-lamp, seashell type and dimmer ON-OFF switch. Using 4 LED’s, replaceable head-light, 360 degree rotatable head-light, Super brilliant, easy to operate, high efficiency with low energy costs and durable for long lasting usage. Technical information: 19” x 1U 4 LED’s Dimmer ON-OFF switch 360 degree rotatable head-light replaceable head-light 220V

Snakelight

Snakelight wide shade

shade

Flexible Snakelight with wide shade beam and powerful light performance.

Snakelight Narrow Shade

Flexible Snakelight with narrow shade beam and powerful light source.

Flexible Snakelight with narrow shade beam and powerful light performance.

60701

Complete set dimmable/wide

Flexible Snakelight with wide shade beam and powerful light performance.

Snakelight narrow shade

Complete set dimmable/BNC narrow shade 60702

Flexible Snakelight with narrow shade beam and powerful light performance.

194 01_03_DAP_Hardware_10_temp2011.indd 194

60706

60711

XLR connector

60707

60712

Gear & Rack Lights

BNC connector

60708

60713

Tablemount

Table mount

[Hardware] 07.03.11 10:21

Roady & tool Bags Bag agss & Ca Case sess se

Toolbag S D6632

Small bag for waistbelt

Toolbag M D6631

Medium bag for waistbelt

Technical Information

Dimensions: 50 x 40 x 150mm (LxWxH)

Dimensions: 75 x 50 x 170mm (LxWxH)

Toolbag L D6630

Large bag for waistbelt

Toolbag XL D6629

Extra large bag for waistbelt

Technical Information

Dimensions: 100 x 50 x 200mm (LxWxH)

Dimensions: 150 x 70 x 200mm (LxWxH)

Toolbag waistbelt

Roady Gloves Available models:

Size: Small, leather roadproof working gloves

D6634 D6634L D6634XL

Roady & tool Bags 01_04_DAP_Bagscases_10_temp2011.indd 195

Belt for toolbags

D6633

Min. 95 cm Max. 110 cm

Size: Large, leather roadproof working gloves Size: Extra Large, leather roadproof working gloves

[Bags & Cases]

195 07.03.11 10:32

Roady & tool Bags Bag agss & Ca Case sess se

Compact Tool Pouch D6620

For on-the-road

• Compact Tool Pouch • Heavy duty Nylon material • Handy tool for each Job on the road

Radio Pouch

Perfect to carry your communication systems D6624

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying many brands communication systems

Beverage Can Holder

AC Pouch

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying all types of soda cans

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying flashlights, Palmtop, etc.

D6628

For Soda Cans

D6623

Small

Technical information:

Dimensions:

160 x 80 x 240 mm (LxWxH)

80 x 150 mm (LxH)

AC Pouch

Rolling Tool Bag

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying flashlights, Palmtops, etc.

• Rolling Tool Bag • Heavy duty Nylon material • Handy tool for each Job on the road • Touch Carrying Handle • Solid Wheels • Retractable Handle for easy rolling

D6622

Big

D6621

Technical information:

Dimensions:

196 01_04_DAP_Bagscases_10_temp2011.indd 196

200 x 190 mm (LxH)

With solid wheels for on-the-road

Technical information: 220 x 220 mm (LxH)

180 x 180 x 160 mm (LxWxH)

500 x 300 x 260 mm (LxWxH)

Roady & tool Bags

[Bags & Cases] 07.03.11 10:32

Roady & tool Bags Bag agss & Ca Case sess se

Radio Chest Pack

For communication systems and other tools D6625

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying many brands communication systems and other tools

Technical information: Dimensions:

230 x 40 x 200 mm (LxWxH)

Tool Bag

40 LP Bag

• Heavy duty Nylon material • Handy tool for each Job on the road • Great tool for carrying all your electrical or mechanical tools

• Heavy duty Nylon material • Handy tool for on the road • 3 small pockets with zipper

D6626

Small

Technical information:

Dimensions:

360 x 260 mm (LxH)

Mobile Office Bag

• Heavy duty Nylon material • Handy tool for on the road • Retractable carrying handle • Solid Wheels • 3 small pockets with zipper

• Heavy duty Nylon material • Handy tool for on the road • Retractable carrying handle • Solid wheels • 4 pockets with zipper

With 3 pockets

D6680

Technical information:

Dimensions:

380 x 210 x 350 mm (LxWxH)

370 x 160 x 350 mm (LxWxH)

Roady & tool Bags 01_04_DAP_Bagscases_10_temp2011.indd 197

410 x 300 mm (LxH)

With retractable carrying handlee and wheels

Technical information: 350 x 200 x 330 mm (LxWxH)

D6660

Dimensions:

DJ Bag-1 D6661

Big

D6627

[Bags & Cases]

197 07.03.11 10:32

Protection Bags Bag agss & Ca Case sess se

Gear Bag 2

Suitable for Strobes, Moonflowers

Suitable for Foggers, Scanners

D6641

Gear Bags • Professional Transport bag • Lightweight Nylon • Heavy duty zipper to secure value items

Gear Bag 1 • Designed for on the road • 1 side pocket with zipper for accessories • Label space for product/ name label

D6642

Technical information:

Dimensions:

240 x 240 x 360 mm (LxWxH)

470 x 300 x 260 mm (LxWxH)

Gear Bag 3

Gear Bag 4

Gear Bag 5

Gear Bag 6

Suitable for Small Mushroom

Suitable for Club Scan

Suitable for Small Scanners

Suitable for Medium Size Scanners

D6643

D6644

D6645

D6646

Technical information:

Dimensions:

300 x 250 x 350 mm (LxWxH)

300 x 300 x 200 mm (LxWxH)

400 x 240 x 180 mm (LxWxH)

470 x 360 x 385 mm (LxWxH)

Gear Bag 10 Gear Bag 7

Gear Bag 8

Gear Bag 9

Suitable for T-Bar with 4 Par 56

Suitable for Starzone/EGO series

Suitable for Small Lighteffects

D6647

D6648

D6649

D6650

Suitable for Phantom and Clubspot • Solid wheels • Retractable handle easy rolling

Technical information:

Dimensions:

1400 x 240 x 340 mm (LxWxH)

198 01_04_DAP_Bagscases_10_temp2011.indd 198

460 x 400 x 200 mm (LxWxH)

Protection Bags

340 x 320 x 440 mm (LxWxH)

350 x 300 x 500 mm (LxWxH)

[Bags & Cases] 07.03.11 10:32