Fuji Quick Reference Guide
Concept ‘O’ Guides
Fuji Guide & Tip Code Chart
Frame Material and Colour
Ring Material
Ring Type
Ring Size
Ring Dimention
- Guides & Tips
Light Single Foot Guides
Purpose
General Purpose Double Foot Guides
Seats - Spin
Reel Seats - Casting
Seats
Seat Parts & Speciality Seats
Ti p Top Guide
Wr ap on Guid e
Deep Pressed Frame on all Concept O models - Strong Ring Holding System - Frame protects ring from damage
FazLite did not ease onto the scene in Fuji’s traditional, time-tested frames. This time, Fuji went all in from the outset. They have added FazLite across the board to their most popular K-Series guide collection, and to make it even better, they are offering it in the newest CC and BC finishes. The FazLite guides are perfect for the value for money segment of rod building featuring cutting edge technologies like tangle-free performance and even the latest KR Concept on spinning rods – and with new CC and BC finishes you can boost corrosion control over regular stainless guides.
• The thinnest ceramic ring available
• 7% lighter than other Silicon Carbide rings and up to 35% lighter than ordinary guides
• Up to 50% lighter than ordinary tips
• 80% greater compression strength over Aluminum Oxide rings
• Available in Concept guide frames only
• Providing 65% greater ring holding strength over ordinary guides
• Priced between Hardloy and Silicon Carbide guides
• Available in casting, spinning, and heavy duty guides styles with Frosted Black or Frosted Silver White finish frame
Ti p Top Guide
Wr ap on Guid e
SUPER HEAT CONDUCTIVITY
SiC has the overwhelming heat conductivity which is 4.6 VT. High heat happens at the point of contact between line and ring when the line is under drag pressure. SiC has fast heat dissipation.
SUPER HARDNESS
The hardness of SiC is almost as hard as a diamond. It is twelve times as hard as stainless. When a line has sand and salt stuck on it, it is like a long file. SiC, has extreme hardness.
SUPER SMOOTHNESS,LOW FRICTION
The SiC ring is diamond-polished. It scores very high in an abrasion resistance when testing against hard rings (Fuji experiment). The line damage remarkably decreased and the color does not change or rust, neither. SiC has ultra-low friction.
SUPER LIGHTNESS
The SiC ring is one third lighter than stainless. That gives it excellent properties when building finesse rods and casting rods. Sic has ultimate lightness.
Mission: Maximise blank performance, maximise line performance.
Fuji remain at the cutting edge of the rod component market and have been working on a new material which delivers a lighter and stronger fishing rod guide. 32 years since they developed the SiC ring, Fuji have created TORZITE, a task specific ceramic. Witness the beginning of the next generation.
The strength of TORZITE allows builders to employ the thinnest and most perfectly shaped ring. The stronger, ultra thin material maintains impact strength equal to SiC.
Ti p Top Guide Wr ap on Guid e
Frame Material / Colour
Frame Model e.g KW, F
Actual pipe I/D of tip
Ring Material e.g. O - O ring
Ring:
Ring:
Ring:
Ring:
Ring:
Deep-pressed frame
Single foot design for top guides for both casting and spinning rods. Patented tangle free design works with braid, mono and fluorcarbon lines
Tip section guide for light spinning, casting and fly applications.
Light Single Foot
Single Foot
L-T FRAME
Toughest L type guide with improved strength in the frame and fixing. Designed as a belly guide in micro guide arrangements.
Deep-pressed frame
KB FRAME
Single foot guide ideal for belly section of KR Concept spining and bait casting rods. Add superior strength in high stress belly section of rods.
Single Foot Guide
KL FRAME
Single foot designed for spinning rods. Patented tangle free design to work with braid, mono and fluorocarbon lines
KL LOW FRAME
Single foot guide for belly and/ or choking guide. Mainly for third chiking guide. Deep-pressed frame
Deep-pressed frame
KL MID FRAME
Medium height frame used for choking guide in KR Concept designs. Mainly used as second choking guide. Uses patented K design for tangle free casting with braid, mono and fluorcarbon lines.
KL HIGH FRAME
Extra high frame choking guide for KR Concept build. Mainly as the butt guide or first choking guide. Uses patented K design for tangle free casting with braid, mono and fluorcarbon line
Deep-pressed frame
Deep-pressed frame
General Purpose
Single Foot Guide
LY FRAME
Deep pressed high frame guide suitable for spinning applications replaces the old Y frame.
Deep-pressed frame
General Purpose Single Foot Guide
High frame single foot for light spinning. Y is phased out by new LY deep pressed frame.
General Purpose
Double Foot Guide
LKW FRAME
Light model of KW guide. The lightest product in double foot model of K series. Entire length of guide is short despite adopting Tangle-free by K sloped frame. Double foot guide for bait casting. It releases line reducingtanglingFor bass, light saltwater and light boat.
General Purpose
Double Foot Guide
Double foot design for spinning and baitcasting applications. Patented tangle free design for braid, mono and fluorocarbon.
General Purpose
Double Foot Guide
LRV FRAME
Light weight, Tangle Free, TITANIUM frame Reverse Guide. For bait casting rod, light boat rod and light jigging rod.
General Purpose Double Foot Guide
Double foot stripping guide designed for spinning. Focuses the line spiral from the spool without tangling.
General Purpose
Light Double Foot Guide
LN FRAME
Light weight guide for casting rods.
General Purpose
Double Foot Guide
Heavy Double Foot Guide
RB FRAME
Triple-foot version of HB guide. Butt guide for deep sea fishing, surf big-game fishing and trolling rod.
Long Cast Guide
LC FRAME
Multi purpose specialty casting guide
4.5/0.8
4.5/1.2
4.5/1.4
F FRAME
Standard tip for spinning and casting featuring a deep pressed frame.
5/1.4
5.5/1.2
5.5/1.6 x
5.5/1.8 x
6/1.6
6/1.8
6/2.0
6/2.2
6/2.4
6/2.6
7/1.6
7/1.8
7/2.0
7/2.2
7/2.4
7/2.6
7/2.8
7/3.0 x
8/1.6 x
8/1.8 x
8/2.0 x
8/2.2
8/2.4
8/2.6
8/2.8
8/3.0
8/3.2 x
10/2.0 x x 10/2.2 x x 10/2.4 x x 10/2.6 x x 10/2.8 x x 10/3.0 x x 10/3.2 x x
Deep-pressed frame
4.5/0.8
4.5/1.0
4.5/1.2
4.5/1.4
4.5/1.6
4.5/1.8
4.5/2.0
4.5/2.2
4.5/2.4
5/0.8
5/1.6
5/1.8
5/2.0
5.5-1.2
5.5-1.4
5.5-1.6
5.5/1.8
5.5/2.0
6/1.4
6/1.6
6/1.8
6/2.0
6/2.2
6/2.4
6/2.6
7/1.6
7/1.8
7/2.0
7/2.2
7/2.4
7/2.6
7/2.8
7/3.0
8/1.6
8/1.8
8/2.0
8/2.2
8/2.4
8/2.6
8/2.8
8/3.0
8/3.2
Smooth transition of the pipe bridge and ring compact and completely tangle free. Features a Flange Ring.
4/0.8 x x x x
4/1.0 x x x x 4/1.2 x x x x 4/1.4 x x x x 4/1.6 x x x x
4/1.8 x x x x 4/2.0 x x x x
4.5/0.8 x x x x
4.5/1.0 x x x x
4.5/1.2 x x x x
4.5/1.4 x x x x
4.5/1.6 x x x x
4.5/1.8 x x x x
4.5/2.0 x x x x 4.5/2.2 x x x x
4.5/2.4 x x x x 5/1.2 x x x x
5/1.4 x x x x 5/1.5 x x 5/1.6 x x x x 5/1.8 x x x x
5/2.0 x x x x 5/2.2 x x x x
5/2.4 x x x x
5.5/1.4 x x x x
5.5/1.6 x x x x
5.5/1.8 x x x x
5.5/2.0 x x x x
5.5/2.2 x x x x
5.5/2.4 x x x x
6/1.4 x x x x
6/1.6 x x x x
6/1.8 x x x x
Deep-pressed frame
7/2.4
7/2.8
8/2.4
8/2.6
8/2.8
8/3.0
8/3.2
10/2.0
10/2.2
10/2.4
10/2.6
10/2.8
10/3.0
10/3.2
10/3.6
12/2.4
12/2.6 x x x x 12/2.8 x x x x 12/3.0 x x x x 12/3.2 x x x x 12/3.6 x x
12/4.0
Anti-tangle due to the sloped frame. This tip is suitable for spin and casting rods.
6/1.8
General Purpose Tip
General purpose for any type of fishing rod
BPHT BPLT
F. Material Stainless Stainless Stainless Stainless
F. Colour Black Silver Black Black R. Material Hard Ring Hardloy
R. Type H H H H
6/1.8 x x x
6/2.0 x x x
6/2.2 x x
6/2.4 x x x
6/2.6 x x
6/2.8 x x x 8/1.8 x x x 8/2.0 x x
8/2.2 x x
8/2.4 x x
8/2.6 x x
8/2.8 x x x
8/3.0 x x
8/3.2 x x
8/3.6 x x
10/2.8 x x
10/3.0 x x x x
10/3.2 x x x
10/3.6 x x
10/4.0 x x
12/4.0 x x
12/4.5 x x x
12/5.0 x x x
12/5.5 x x
16/5.0 x x x 16/5.5 x x x
16/6.0 x x x Disc Disc Disc Disc
Sloped frame tip for jigging bottom fishing and trolling up to 50lb class.
HN FRAME
Jigging, bottom fishing and trolling rod tip top, up to 50 lbs. Class use together with HB and RB type frame guide.
10/5.0
12/4.0
12/4.5
12/5.0
12/5.5
UX FRAME
Ideal for jigging, heavy boat and trolling up to 50lbs. Ideal to use with LRX guides.
8/2.8
8/3.0
8/3.2
8/3.6 x
10/2.6 x x x x 10/2.8 x x x x 10/3.0 x x 10/3.2 x x 10/3.6 x x x x
10/4.0 x x x x 10/4.5 x x x x
10/5.0 x x
12/4.0 x x x x 12/4.5 x x
12/5.0
12/5.5 x x
12/6.0
12/7.0
Example
I/D … Inner Diameter O/D … Outer Diameter W
Track Width
Non Label + Non Trim Ring
NHSS Size 13 / 15
Narrow Hump Spinning Seat
NVSS Size 13 / 15 / 17 / 19
Narrow Versatile Spinning Seat
MTCS Size 13 / 15
Micro Trigger Casting Seat
SK13-11.0
SK15-13.0
SK13-11.0 T2C-MTCSK13-11.0
SK15-13.0
T2CP-MTCSK13-11.0
SK15-13.0 T2CP-MTCSK15-13.0
Size 13 / 15
Flat Back Casting Seat
SK13-11.0
SK15-13.0
SK13-11.0 T2C-FBCSK13-11.0
T2CP-FBCSK13-11.0
SK15-13.0 T2C-FBCSK15-13.0 T2CP-FBCSK15-13.0
PSLS
Size 15 / 17
Palming Support Light Seat
Size 19
Vertical Jigging Trigger Seat
Silver T2-BRF Dark Grey
T-BRK Silver 16/18
T2-BRK Dark Grey
T-DRT Silver 19/21 T2-DRT Dark Grey VJTS
Silver 16.5/18.5
T2-BRD Dark Grey
General Purpose Pipe seats suitable for all rod applications.
Heavy Duty General Purpose Pipe seats suitable for offshore rod applications
Ferruled Pipe Seat for easy butt seperation for transport.
BLANK EXPOSED SPINNING REEL SEAT
Light blank exposed spinning reel seat ideal for lure casting applications for both fresh and salt water.
SPINNING REAL SEAT
Light spinning reel seat ideal for lure casting applications for both fresh and salt water
SPINNING REAL SEAT
Light spinning reel seat ideal for lure casting applications for both fresh and salt water. Note: Can get optional trigger to make into casting seat.
TRIGGER PIPE SEATS - SMALL
General Purpose Trigger Pipe seats suitable for all rod applications
TRIGGER PIPE SEATS - LARGE
General
ACCURACY CASTING SEAT
Blank exposed bait cast reel seat designed to increase accuracy.
2nd number is ID. (i.e. 16/9.5 is 9.5mm ID)
ACSSD CC Trim Colour Frosted Silver White
16/9.5 x 16/10.0 x 16/10.5 x 16/11.0 x 16/11.5 x
BLANK EXSPOSED CASTING REEL SEAT
Light blank exposed bait cast reel seat ideal for lure casting applications for both fresh and salt water
SEAT A good finesse casting reel seat for mid nad small sized biatcasting reels
BLANK EXPOSED PALMING SUPPORT ULTRA LIGHT
TRIGGER SEAT
A smaller palm support designed for Light Jigging and light boat rods, perfect for middle size bait reel
LIGHT PALMING SUPPORT
Lightweight blank exposed palming support for improved sensitivity
Jigging
PALMING SUPPORT
Palming support for jigging PSS applications.
SKELETON REEL SEATS
Ultra light invative skeleton reel seats for Spinning and Casting rods.
MUST HAVE A PART FROM CATEGORY 1 + 2 + 3 TO COMPLETE REEL SEAT
Skeleton
SKELETON FLY SEAT
Skeleton slidable hood and pipe body for fly fishing.
Skeleton
PLATE SEATS
Bind on plate seats.
The “BACKSTOP-mechanism” has a unique COLLAR structure and new Double-nut system. This system helps avoid loosening as much as possible.
NOTE: Hood grips are available in Duralon, Camo Duralon & Cork KD WINDING HOODS To upgrade any reel seat to have a hood
Cork arbors can be used in every Fuji Reel seat made as well as the inside of a carbon tube, these arbors give you better feeling through the blank, make building the rod easier and the end result is a reel seat that won’t twist on the blank if the tape gives away. Below is the range of arbors we have in stock. Cork Arbors comes in packs of 2 and the I/D is in increments of 0.5mm, the O/D is designed specifically to fit each reel seat or carbon tube so there is a range of types as below, you order based on reel seat and the blank diameter.
Cork tube for ACS 16-15.0
Cork Tube for PLS 18
Cork Tube for PTS 17, PMTS 17, PULS 17
Cork Tube for TVS 16
Tube for TVS 17
16
for DPS 17
Tube for DPS 18
Carbon Tubes come in 5 different carbon patterns / colours. These tubes are made specifically for each Fuji reel seat. They are designed so you use the tube under the seats and then attached the tube / seat to the blank either using traditional method or cork arbors designed to fit the tubes.
By using Carbon Tubes you can easily get that exposed blank feeling and look of the high end rods without having to have a blank that exactly fits the reel seat, making the new reel seats now a universal fit with the carbon tubes.
Carbon Tube for ACS Reel Seat
Fits ACS 16/15.0 Reel Seat Fits PLS 18 Reel Seat
Carbon Tube for PLS Reel Seat
Carbon Tube for Trigger 17 Reel Seats
Carbon Tube for TVS 16 Reel Seat
Carbon Tube for TVS 17 Reel Seat
Fits PTS 17, PMTS 17, PLUS 17 Reel Seat
Fits TVS 16 Reel Seat
Fits TVS 17 Reel Seat
Butt Accessory
Butt Accessory
Butt Accessory
Butt Accessory
Butt Accessory
Butt Accessory
FT PACK
- Available in BC Frosted Dark Gray and CC Frosted Silver White
- 4 Packs to make fixing tips a breeze
- Comes complete with 3 tips & Fuji Glue
- Initially in Fuji’s “O” Ring but soon available in other ring styles
• Light Pack for light rods e.g. estuary
• Med Pack for offshore or heavy estuary
• Heavy Pack for reef or heavy offshore rods
• XO for heavy boat and reef rods
Fuji EZ Slide (EZSLIDE)
- Slidable hook keeper
- 2 x EZ Slide
- 4 x UV Resistant O rings
EZSLIDE - Black EZSLIDE - Orange
FUJI EZ HOOK KEEPER II (EZKEEP)
- Can be placed anywhere on rod with supplied O Ring’s
- Snaps into place when up or down for different applications
- 2 x EZ Keeperz in pack
- 4 x UV resistant O rings
COLOURS-
- EZKEEP
- EZKEEPBK
EZKEEPPU
Fuji Hot Melt Glue (GLUE)
- Easy tip attachement with a match and the glue stick
The Rod Building drying stands proudly showcase Fuji's unmistakable craftsmanship. They have been meticulously fashioned to encapsulate the renowned Fuji quality and expertise that has earned our trust. Newly forged from stainless steel, these wrapping stands are engineered for enduring durability. The ingenious design incorporates specially cut slots on the side of the stand, allowing for the secure placement of a rubber ring to prevent any inadvertent slipping of blanks. These sturdy, lightweight rod stands are impeccably finished with felt-padded rod rests and can be seamlessly utilized on any benchtop surface.
Previous model pictured
Fuji Bind On Hook Keeper
- Black BHKM10W
- Chrome HKM10W
Fuji’s fold down hook keeper, bind on attachment.
Note: Stand only also available (FUJISTAND)
FLY GUIDES & TIPS
-Ultra light english wire guides and tips for fly rods
-Hardened to MACH 1
Size 1.6, 1.8, 2.0, 2.2, 2.4, 2.6, 2.8, 3.0
Over Sized Wire Tip with a loop size of 7.0mm HHXLFT
Size 2.0, 2.2 Extra Large Wire Tip with a loop size of 8.5mm
or 5mm
Wire Hook Keeper, Bind on. (Sold as bag of 5)
SHAPED GRIPS
All types of grips shaped for specific purposes.
KD16 KDPS 16
KS16 KS16, TVS16
KD17 KDPS 17
KS17 KS17, TVS17, PTS17, PMTS17, PULS17
KD18 KDPS 18
KD20 KDPS 20
KD22 KDPS 22
DURALON GRIPS - Resistant to chemicals, non slip and durable. Duralon grips available in the following colours:
CORK GRIPS
- Rear grips recessed to fit 19mm butt caps. Recommended butt cap is BCBRC19 - Front section of rear grips recessed to fit Fuji Trigger Pipe Seats sizes 16, 17 &
Recommended real seat is TCSD or TCSM..
LEATHER ROD GRIP (LEATHERSTRAP)
Black Leather Strip for game rods. Non perforated, bevelled edge
Length 153cm, width 1”.
HEAT SHRINK RUBBER ROD GRIP (HEAT)
- Non-Slip grip which holds when wet.
- Available in Black and Black/Red 1 metre long.
- Shrinks about 25%
Rejuvenate your old, worn out fishing grips with the new Coloured Heat Shrink. It feels great in your hand and is ideal for all rods. The product is available in different sizes to adapt to all applications. It has a textured soft feel pattern to ensure for an ultimate grip.
ROD BINDING ROLLER (RODBINDROLL)
- Great for the home rod builder that wants to start their own rod without the expense of a lathe.
- Sturdy metal base with roller bearing wheels
RUBBER WINDING CHECKS (WIND)
Pack of 10
Available in sizes 9, 13, 17 and 19mm ID
ERSKINE ROD FINISHES
Epoxy Rod Finish (CODE: 3337-Size) - Available in kits of 60ml, 240ml or 1L
For a crystal clear professional rod finish, you can’t go wrong with the 2 part rod finish erskine epoxy. Easy to use for the every day rod builder, this set includes resin and hardener and is a great one coat fast repair epoxy.
NB:- Part “A” Resin is prone to crystillizing in cold weather. This does not affect the product at all. To bring back to fluid state either place the bottle in a container of boiling water or remove lid and place in microwave for a 5-10secs at a time until back to fluid state.
SPEED ROD FINISHES
Speed Thread Sealer & Filler (CODE: SEALERSPEED) - Available in 50ml or 500ml)
Speed High Gloss Rod Finish (CODE: FINISHSPEED) - Available in 50ml or 500ml)
ERSKINE ROD FINISHES
Thread Preserver & Sealer (CODE: 3336-Size) - Available in 30ml, 120ml or 500ml
Epoxy Rod Finish (CODE: 3337-Size) - Available in kits of 60ml, 240ml or 1L
To order code is A-(colour eg BK)-(modelcode eg DRT)
Standard Pipe Seat Configuration
Seat with Hood Configuration
Trigger Seat Configuration
Decorative Pipe Seat Configuration with Extention
Decorative Trigger Seat Configuration
Decorative Split Butt with Skeleton Configuration
MODEL/CODE
Winding Check (WCF) Winding check for front grips or splitt butt 8, 8.5, 9, 9.5, 10, 10.5, 11, 12, 13, 14, 15, 16, 17, 18
Winding Check (WCFSL) Slimline winding check
8.5, 9, 9.5, 10, 10.5, 11, 12, 13, 14, 15, 16, 17, 18
Collar Ring (DRT)
MODEL/CODE DESCRIPTION
SIZE I/D (MM)
SK Spacer (SK) Spacer for SK Skeleton Seats at 34mm long and tapered to fit both ends. 16 suits #16 seat 17 suits #17 seat
Decorative Butt Plate (DBP) Decorative butt plate can be used by itself or adding 5mm ID rings for feature. It has a rubber external and coloured internal part with coloured ring standard.
Ring Inner (RI)
Inner Ring, combines with Ring Outer for multicolour rings. 5mm for use with butt plate 15mm for carbon tube as internal (CT-ACS16/15.0) to use in Duralon or reel seats.
ID 5 for (DBP), 12, 15 (fopr CT), and 18
Ring Outer (RO) or (ROS) - slotted Outer Ring to fit over Ring Inner (RI) part. This allows different colour to inside holes. OD 27
Solid (RS) Solid Ring 5mm for use with butt plate 15mm for carbon tube (ACS16/15.0)
Combo Examples
ID 5 or 15 OD 27
The genesis of CG3 blanks stems from an extensive wealth of experience cultivated over countless years of angling in the challenging Australian conditions, with a keen focus on local fish species. This invaluable knowledge is further fortified by decades of expertise in blank design, manufacturing, and rod crafting. CG3 blanks represent the culmination of these years of dedication and passion.
Crafted with cutting-edge materials and advanced manufacturing techniques, CG3 blanks are tailor-made to excel in the unique Australian environment. They are not merely products; they are purpose-built tools, meticulously designed to serve specific angling needs.
Every individual CG3 rod blank undergoes a rigorous design process, often involving multiple iterations and prototypes, to achieve a precise action that aligns with its intended application. Rigorous field testing is a non-negotiable step in our development process. Each blank is transformed into a fully-fledged rod and subjected to real-world scenarios before mass production commences.
During the journey from conception to production, each and every blank is subjected to meticulous testing across predetermined criteria. This ensures uniformity in straightness, consistent tip and butt diameters, and balanced weight throughout the entire model range. Consequently, anglers can trust that every CG3 rod offers a consistent, reliable performance with the specific strength-toweight ratios needed to conquer their angling objectives.
In essence, CG3 blanks are not just fishing equipment; they are a testament to our unwavering commitment to crafting superior tools for passionate anglers who demand nothing less than excellence. With CG3, you’re not just fishing; you’re mastering the art of angling with precision-engineered companions by your side.
Special Butt Section Notes
Note: Due to the production nature of some blanks, there are some that have a section that is to be glued into place, this is not a tapered join that can be left, it is a blank production method to keep costs down and installed under the grip usually. Blanks that have this are noted in the no of pieces as + x and there is a length in the specs labeled Length X as below diagram indicates Length X
Please glue butt on indicated blanks.
Egi Series
The blanks are a multi taper designed specifically to impart vital movement to the jig quickly while still having the flexibility to handle the lunging runs of squid.
Estuary Series
Tailor made for the Australian estuary angler this blank delivers the refinement, precision, and lightness that all serious estuary anglers look for in a rod. A rod that is simply flawless in design and stunning in performance.
1/2 1.5-3.0
A lightweight two-piece Egi blank for jigs in the 1.5-3.0 size range.
1/2 2.5-4.0 A Medium/Light two-piece Egi blank for jigs in the 2.5-4.0 size range.
1/2 2-10g
1/2 2-10g
This blank is perfect for skinny water applications or for kayak and shore anglers looking to fish tight waterways.
This blank is an excellent all-rounder for ultra-light estuary fishing and comes in a one and two piece model. 2-10g
1/2 2-10g
A seven foot long ultra-light blank that is a great all-rounder. It is available in one and two piece models and will be perfect for lures and bait. 2-10g
1/2 2-12g A seven foot six inch long ultra-light blank that is a great long cast flats rod.
1/2 3-14g A fast, shorter six foot allrounder perfet for kayaks and shore based anglers fishing tight waterways. The shorter blank offers better control of fish in close quarters.
1/2 3-14g
The six foot six inch blank comes in both one and two piece rods. This is a versatile blank and can be used for many different builds. 3-14g
1/2 3-14g A seven foot all-rounder tailor made for the Australian estuary angler. This blank delivers the refinement, precision, and lightness that all serious estuary anglers look for in a rod. A rod that is simply flawless in design and stunning in performance. 3-14g
5-15g
A purposefully single piece blank with an excellent ability to cast diving lures, surface presentations, as well as spinnerbaits. With low down power and sensitivity at the tip, they give you the ability to react quickly, plus the power when needed, to extract fish from the most hideous environments.
Estuary Series (Cntd)
Power meets performance and perfection in this blank. Designed to deliver the muscle and control needed for offshore angling, these blanks
a smooth flex pattern perfect for hard fighting species.
Shorebased Series
Lightweight and strong, these blanks were specifically designed for chucking lures off the stones and beach. As a result the balance is excellent for all types of beach fishing.
1/2 5-15g
350 5-15g
1/2 5-21g
350 5-21g
A medium weight estuary rod perfect for lure casting and bait. this blank was tailor made for Australian estuaries where a heavier rod is needed. It comes in a one and two piece model.
Available in a one and two piece model, the 6-14lb blank is built for those days, you need something a little more from your 7 foot rod.
5-21g A short single piece blank with an excellent ability to cast diving lures, surface presentations, as well as spinnerbaits.
5-21g A single piece blank with an excellent ability to cast diving lures, surface presentations, as well as spinnerbaits.
1/2 7-28g
7-28g 7-28g
8-35g
490 1/2 8-35g
8-35g
This seven foot 8-16lb blank is perfect as an estuary all-rounder. With the ability to trhow larger lures up to 28 grams, it will handle anything you throw its way.
Power meets performance and perfection in this blank. Designed to deliver the muscle and control needed for all styles of angling.
Available in one and two peice construction, the 10-25lb is the perfect light offshore blank.
A shorter stouter rod in a one piece design.
10-50g A short but strong blank adaptable enough for a variety of builds. This rod only comes in a one piece model.
10-50g
A seven foot blank available in one and two piece construction. The blank is strong at the bottom end where you need it and sensitive at the tip to ensure you never miss a bite. 1/2 10-50g
30-100g A medium-heavy 6 foot, one-piece blank for 20-40lb line class. This blank would lend itself well to a strudy bait rod or jig stick.
20-80g
A medium-heavy 7 foot, one-piece blank for 20-40lb line class. Available in a one and two piece model, this blank is the perfect offshore all-rounder for lures or bait applications. 1/2 20-80g
60-150g
1/2 20-50g
1/2
1/2
1/3
A one piece six foot design for dropping baits or jigs offshore. This blank is strong where you need power and sensitive so you miss nothing.
Lightweight and strong, these blanks were specifically designed for chucking lures off the stones and beach. As a result the balance is excellent for all types of beach fishing.
Lightweight and strong, these blanks were specifically designed for lobbing heavy weights off the beach. Available as a two piece in the lightest model and three peice in the heavier. The balance is excellent for all types of beach fishing.
In the pursuit of angling excellence, a pivotal question arises: where does the fine line between maximum strength and ultimate lightness intersect, and which materials offer the optimal strength-to-weight ratio? This conundrum ignited our quest, leading to the development of our revolutionary Triple Layer Carbon blank technology.
Crafting a fishing rod blank presents a delicate balance. Excess resin yields a robust yet unwieldy and cumbersome rod, while insufficient resin renders it brittle, unable to withstand the rigors of battling formidable aquatic adversaries. Our mission? To pinpoint the precise juncture where strength and weight converge to create the consummate blank.
The result of our relentless innovation is a blank composed of three distinct layers. The top and bottom layers counter each other at opposing angles, while the middle layer stands vertically. Painstaking experimentation with carbon cloth technology led us to the perfect configuration, maximizing resilience, flexibility, and striking force. This ingenious design minimizes twisting, enabling the blank to transmit energy and power seamlessly down the line, minimizing loss of force. The outcome: reduced fatigue for the angler and shorter battles with formidable fish.
To enhance strength and saturate the layers, every blank requires resin. We’ve meticulously honed resin recipes tailored to each unique range of blanks. Our cutting-edge technology empowers us to machine roll the blanks, ensuring the ideal resin distribution for each rod’s intended purpose. The result? Precise blanks devoid of internal imperfections that could lead to breakage, while maintaining the perfect weight for each rod.
To culminate the process, all our blanks undergo a hot press baking procedure. This pressurized treatment melds the layers into a single, robust, lightweight entity. It solidifies the resin and begets a singular, resilient blank.
The outcome is clear: our Triple Layer Carbon blanks epitomize power, lightness, and swift responsiveness. Each one represents a testament to our unwavering commitment to delivering the finest angling tools, where strength and weight harmoniously converge to redefine your fishing experience.
The blank we created has three layers, the bottom and top layer are angled in opposition to each other. The middle layer is laid vertically.
To add strength and wet the layers all blanks need resin. We have experimented with different blank purposes and have developed a resin recipe for each individual range.
All our blanks are hot press baked. This is a pressurised process that heats all the layers to bind them as one. It hardens the resin and creates a single strong, light blank. Power, lightness and a quick reacting force.
With the ultra fast taper and light tip it will cast those light lures or unweighted plastics with ease. Very
The perfect bream rod, with its light tip and fast taper this rod is great for plastics and feeling those all important bites.
SP203-C Designed to have the same power as the 201 but a slower taper and is designed for using with hard bodied lures so you don’t pull hooks unlike a faster tapered rod
Stepping up in class from our bream range to the heavier estuary or light snapper rod. This is a great all round rod for someone that likes to chase Flathead to Jew or sneak outside for those snapper.
The lightest of our bass & barra series, designed for casting light crankbaits with its light tip, this rod has some power to get those bass out of their holes. Great for creeks or light dam fishing.
Perfectly designed to cast lipless crankbaits or larger crankbaits this blank is great for dams or light barra fishing.
SP532-C
Designed for barra dam or river fishing this is the rod for your casting needs. With a light tip to make casting lures easy and plenty of grunt to turn those barra. Butt section separates for easy plane flights.
Looking for a plastic rod with a lot of grunt for casting at barra or large snapper?, then this is the rod. Fast 15-25
This rod is a fantastic bait rod for reef fishing. It has a strong butt section to pull tough fish out of the reef.
SP602-C For heavy applications and those big fish on plastics or biat, this rod can get fish out where needed.
SPJIG08-AB
A heavy spin rod, designed for hard fighting and hard running pelagics. Great for throwing smaller lures at large fish.
A series of all-rounder boat rods with user friendly actions and a wide weight range.
The Jig blanks are built light reducing fatigue but strong enough to land even the most difficult fish. Dont think t are just for jiggin, makes a great trolling rod also!
The Poping blanks are tough poping rods designed to keep you casting all day long. The ultra light build and design keep comfort levels high while the butt end provides stopping power when you need it.
SPSB6 The StickBait blanks are tough rods designed to keep you casting all day long. The ultra light build and design keep comfort levels high while the butt end provides stopping power when you need it.
Samurai squiding blanks are built with a multi-taper, ensuring that once you are hooked up, you stay hooked up. Available in a light and medium model.
A dedicated shore casting series of blanks covering everything from bream and estuary species through to jewfish and larger beach and rock fishing targets. Perfect as a bait or lure casting rod build
An exquisite jig rod range of blanks based on the popular Samuraiu X-Tracta range. Covering jigging from light through to medium weights
for chasing cods
SPJIGPE4-A Weight and comfort are important. Our blanks are proven to reduce fatigue. The triple layer carbon blank has the perfect amount of cloth to resin ratios to be light and strong.
SP20G-AB
Lightweight, comfortable and balanced. That’s the ultimate combination in the fast-paced world of light jigging. Whether you’re dropping 40 grams or 150, the X-Tracta Light Jigging range has what you need.
Say goodbye to tedious and time-consuming rod wrapping! The Fuji EZ Thread is an ingenious thread designed to simplify the wrapping process. With its intuitive design and user-friendly features, even beginners can repair broken guides effortlessly. EZ Thread adapts to any rod type and size, accommodating various thread thicknesses for complete customization. The thread lays flat, reducing gaps, and allowing for a repair to be made from the guide foot down to the blank as opposed to the traditional blank onto guide foot method. This makes it easier to hold the guide in place while binding.
The threads come in two types, an opaque and transparent in a small selection of popular colours. A perfect complement to the EZ Thread, the Fuji EZ Bobbin is a game-changer in thread management. This innovative bobbin streamlines the thread control process, ensuring seamless thread release and preventing tangles during rod wrapping. The EZ Bobbin ensures a consistent and smooth release of thread, preventing snags, knots, and tangles for uninterrupted wrapping. It has an easy-to-use tension adjustment mechanism allowing users to customize thread tension according to their preferences, guaranteeing flawless thread application.
FEZTHM-S01 Opaque Black X
FEZTHM-S02 Opaque Red X
FEZTHM-S03 SilverOpaque Blue X
FEZTHM-S04 Opaque Green X
FEZTHM-S05 Opaque Brown X
FEZTHM-T00 Transparent White X
FEZTHM-T02 Transparent red X
FEZTHM-T03 Transparent Blue X
FEZTHM-T04 Transparent Green X
FEZTHM-T06 Transparent Gray X
Fuji worked closely with Anglers resource to develop a unique wrapping thread made of specialised polyester that accepts finish beautifully and importantly resists UV, aging and abrasion better than nylon. Polyester is the number one thread choice for any outdoor application in the marine industry for its ability to withstand harsh environments such as salt water, and scorching UV rays.
Fuji Poly brings a bright colourfast finish to any rod building project and thanks to high tech manufactoring process where dye is computer controlled and digitally measured you can count on consistant colours from spool to spool.
Available in NOCP (no colour preserver required), Ultra (requiring colour preserver to maintain its colour) and Metalics in A and D thread thickness and 100m and 1oz spools.
Frogleys Offshore has kits that can be custom made for any rod or grip configuration. We also have generic repair/build kits for common rod types as well as kits for all of our Samurai Rod Blanks which include spacing’s and directions to make building easy!
GENERAL KITS: We have basic kits for repair or build your own for many different fishing types. These come with generic spacings and components to suit the style of fishing.
www.fujitackle.com.au
www.frogleysoffshore.com.au