ZT-0470

This is not a safe queen. Oh, it’s pretty enough, but it’s built by ZT, so it’s built for function. Designed by Dmitry Sinkevich, the 0470 is a highly practical, easy-to-EDC pocketknife that handles a wide range of tasks. The blade is wear resistant, corrosion resistant CPM 20CV high-chromium stainless steel. The handle is titanium with an eye-catching marbled carbon fiber insert that adds a sophisticated touch to the look of this knife.

• Made in the USA

• CPM 20CV powdered metallurgy tool steel with high volume of vanadium carbides for exceptional wear resistance and long-lasting edge; two-tone, satin-and-stonewashed blade finish

• Titanium handle with marbled carbon fiber insert; instead of a “weave,” carbon fibers are dropped randomly onto the plate, resin secures the fibers and produces a smooth surface

• A mid-sized carry for the weight of a compact thanks to titanium handles

• Blade Steel CPM 20CV

• Blade Length 3.4 in. (8.6 cm)

• HRC 60–62

• Blade Finish/Coating Bead-blasted finish flats, satin finish grinds

• Blade Thickness 0.121 in. (0.307 cm)

• Closed Length 4.4 in. (11.2 cm)

• Handle Material Titanium, marbled carbon fiber front insert

• Handle Color Black & Silver

• Handle Finish/Coating Bead-blasted finish

• Handle Thickness 0.48 in. (12.2 mm)

• Overall Length 7.8 in. (19.8 cm)

• Weight 3.2 oz. (92 g)

ZT-0562CF, 2 Tone, Hinderer

The cousin of the 0562, this ZT features the same special Rick Hinderer flat-ground “slicer” grind that provides both slicing efficiency and a tough point, but on a CPM 20CV powdered steel blade.

CPM 20CV has a high volume of vanadium carbides and a high amount of chromium. You get exceptional edge retention and outstanding corrosion resistance.

The 0562CF’s handle has a carbon fiber front scale and stonewashed titanium back. For secure lock up during use, ZT uses a frame lock with hardened steel lockbar inserts and lockbar stabilization. The knife opens with a flipper and moves out of the handle on our smooth KVT ball-bearing opening system. A washer with caged ball bearings surrounds the pivot and makes opening the knife nearly frictionless; just pull back on the flipper and add a roll of the wrist and the 0562CF is ready for action.

The unique pocketclip is reversible (left/right) and enables extra-deep carry in the pocket.

• Made in the USA

• KVT ball-bearing opening system

• Flipper

• Reversible deep-carry clip (left/right, tip-up)

• Frame lock, lockbar stabilizer

• Steel: CPM 20CV or CTS-204P, stonewashed & satin finish

• Handle: Carbon fiber front, stonewashed titanium back

• Blade Length: 3.5 in. (8.9 cm)

• Blade Thickness: 0.156 in. (0.396 cm)

• Closed Length: 4.8 in. (12.2 cm)

• Overall Length: 8.3 in. (21.1 cm)

• Weight: 5.5 oz. (156 g)

ZT-0022,

Yes. This is the smallest ZT we’ve ever made. And yes, it’s an impressive piece of engineering.

The 0022 from ZT and Tim Galyean is the most compact ZT ever.

But this mini is mighty.

The 1.8-inch clip point blade is ready, willing, and able to take on just about any task. For good looks, the titanium trim ring around the pivot and tube spacer are anodized in blue. Makes an exceptionally easy-to-carry EDC.

• Made in the USA

• Under 2-inch blade; CPM 20 CV blade steel for superior hardness, corrosion resistance, and edge retention

• Carbon fiber front scale, titanium back with frame lock for secure blade lockup during use

• Though small, the 0022 is designed for hand comfort with deep finger contours to ensure a good grip

• Titanium trim ring around pivot and titanium tube spacer are anodized in blue and add visual interest to this mighty mini

ZT-0308,

• Blade Steel CPM 20CV

• Blade Length 1.8 in. (4.9 cm)

• HRC 60–62

• Blade Finish/Coating Stonewashed finish

• Blade Thickness 0.121 in. (0.31 cm)

• Closed Length 3 in. (7.6 cm)

• Handle Material Carbon fiber front, titanium back

• Handle Color Black

• Handle Finish/Coating Stonewashed finish back

• Handle Thickness 0.435 in. (11 mm)

• Overall Length 4.75 in. (12.2 cm)

• Weight 1.7 oz. (50 g)

For those who prefer their knives on the larger side, we created the 0308. The 0308 offers a beefy 3.7-inch blade of premium CPM 20CV. The handle features coyote tan G10 on the front scale with a titanium back. Both front and back are heavily 3D machined for an ultra-secure grip. The 7/32-inch solid pivot features a custom nut that enables it to be adjusted in the field with a 1/2-inch wrench. The pocketclip hole pattern is compatible with many after-market clips.

• Made in the USA

• Solid pivot has custom nut; enables in-thefield adjustment with .5-inch wrench

• CPM 20CV blade steel offers exceptional hardness, wear resistance, edge retention; stonewashed finish helps hide use scratches

• KVT ball-bearing opening, flipper; titanium framelock with hardened steel lockbar insert secures blade safely open during use

• Compatible with variety of after-market pocketclips

• Blade Steel CPM 20CV

• Blade Length 3.75 in. (9.6 cm)

• HRC 60–62

• Blade Finish/Coating Stonewashed finish

• Blade Thickness 0.156 in. (0.4 cm)

• Closed Length 5.2 in. (13.2 cm)

• Handle Material G10 front, titanium back

• Handle Color Coyote Tan

• Handle Finish/Coating Bead-blasted finish back

• Handle Thickness 0.61 in. (15.7 mm)

• Overall Length 8.9 in. (22.5 cm)

• Weight 6.9 oz. (197 g)

• Extras Lanyard hole, decorative pivot cap, weight-relieving handle window

ZT-0235, Anso CF/CPM

From ZT and Danish designer Jens Ansø, the new 0235 expands on the original 0230, offering a high-class, premium performance carry.

The new spear point blade is opened with a double detent system: two steel detent balls, one on each side of the blade. They hold the blade safely closed for carrying. Then, for controlled open and close, the 0235 also has a half-open position.

An extra-deep-carry clip provides a new way of carrying this sleek, simple, and extraordinary design.

• Made in the USA

• Designer Jens Ansø

• Blade Style Spear Point

• Opening Action Manual washers

• Opens With Nail nick

• Lock Type Slipjoint

• Pocketclip Reversible extra-deep-carry (right/left, tip-up)

• Hardware Black-oxide steel pivot nut, Navy blue anodized aluminum backspacer, blackoxide steel screws

ZT-0230,

• Blade Steel CPM 20CV

• Blade Length 2.6 in. (6.6 cm)

• Blade Finish/Coating Stonewashed finish

• Blade Thickness 0.121 in. (0.31 cm)

• Closed Length 3.8 in (9.7 cm)

• Handle Material Carbon Fiber

• Handle Color Black

• Handle Thickness 0.4 in. (10.2 mm)

• Overall Length 6.3 in. (16 cm)

• Weight 1.8 oz (51 g)

Minimalist design meet maximum performance in the 0230 from ZT and Danish designer Jens Ansø. This slip-joint knife features a double detent system: two steel detent balls, one on each side of the blade. The hold the blade safely closed for carrying. Then, for controlled open and close, the 0230 also has a half-open position. An extra-deep-carry clip provides an easy way of carrying the knife in your pocket. Everything combines to make this a simple, yet extraordinary pocketknife.

• Made in the USA

• Double detent system: two steel detent balls, one on each side of the blade for safe carrying, controlled open/close

• Blue anodized aluminum backspacer with integrated lanyard attachment

• CPM 20CV blade steel offers exceptional hardness, wear resistance, edge retention; stonewashed finish helps hide use scratches

• Extra-deep-carry pocket clip provides a convenient, low profile carry

• Ultralightweight carbon fiber handle

• Blade Steel CPM 20CV

• Blade Length 2.6 in. (6.6 cm)

• HRC 60–62

• Blade Finish/Coating Stonewashed finish

• Blade Thickness 0.121 in. (0.31 cm)

• Closed Length 3.7 in. (9.5 cm)

• Handle Material Carbon fiber

• Handle Color Black

• Handle Thickness 0.4 in. (10.2 mm)

• Overall Length 6.2 in. (15.7 cm)

• Weight 1.8 oz. (52 g)

Whether it’s for survival, the great outdoors, or summer projects, the military inspired 0006 is the answer. Though it pays homage to the original ZT-9 with a steel guard, this full-tang beast is not a bayonet. Instead, this versatile ZT fits snugly in a durable Kydex sheath for travel. Named after its 6-inch blade, the 0006 uses CPM 3V, a tough tool steel that resists edge chipping during the hardest work tasks. While this non-stainless steel wasn’t designed for corrosion resistance, ZT added a clear Cerakote coating for greater durability. It’s a thick blade at 3/16 inches, but still plenty functional. The rounded profile fills the hand without being too big, and an olive G10 handle offers comfortable grip. Choke up on the aggressive jimping with or without gloves for greater control. When ZT makes a fixed blade, there’s nothing else like it. The 0006 is no exception.

• Made-in-the-USA fixed blade with steel guard

• CPM 3V steel provides superior toughness and resists edge chipping; bead-blasted finish with clear Cerakote coating for added durability

• OD Green G10 Handle with texturing

• Kydex sheath with secondary retention strap for travel; includes slots, drainage hole, and can be carried left- or right-handed, high or low carry