Traditional Style Structural Fire Helmets................. 3 - 4 Metro Style Structural Fire Helmets............................. 3 Lights....................................................................... ...3 Jet Style Structural Fire Helmets................................... 4 Brushfire Helmets........................................................ 4 Utility Helmet............................................................. 5 Rescue Helmets...................................................... 5 - 6 Water Rescue Helmets................................................ 6 Helmet Standards Chart............................................... 7 Electronic Warning Beacons................................... 8 - 9 Fire Gloves................................................................ 10 Clean-Up Gloves........................................................11 Extrication Gloves......................................................11 Disposable EMS Gloves..............................................11 Gear Bags.................................................................. 12 Goggles..................................................................... 12 Protective Eyewear.................................................... 13 Safety Gear......................................................... 14 - 15 Fire-Resistant Hoods.................................................. 16 Hand Sanitizer.......................................................... 17 Respirators................................................................ 17 Communications....................................................... 18 Electrical Safety......................................................... 19
Pacific Helmets Offer the ultimate in protection, flexibility, comfort and safety. These Dupont™ Kevlar® lined helmets are lighter in weight and provide superior impact protection and heat resistance compared to most other popular helmets. Pacific Helmets are the only helmets that offer the optional built-in flashlight holder for improved hands-free illumination.
Why DuPont™ Kevlar®? The benefits include:
Sheer Strength - the shell is virtually unbreakable as Dupont™ Kevlar® retains it’s integrity and will not tear. Dropping a complete helmet will often mark the paint or even chip through to the fabric, however, the shell will rarely break or split. Light Weight - matched against the equivalent woven fiberglass material, Dupont™ Kevlar® is 20% lighter. This creates a helmet that is as much as 100gms lighter than a fiberglass reinforced helmet.
Pacific Helmet
Warranty Information ty Warran t s e B e ! Th ndustry n The I I
Pacific Helmets’ Dupont™ Kevlar® reinforced outer shell is backed by a 6-year limited warranty.
Each helmet also carries a 2-year limited warranty on impact liners and ratchet suspensions. Internal parts including crown pads, ribbons and sweatbands are NOT covered by this warranty.
An organization created to provide superior personal protective products that meet the needs of fire fighters and first responders. Alliance Fire and Rescue, Inc. is the exclusive supplier of Pacific Helmets of New Zealand in the United States, Canada and Puerto Rico.
2
alliancefireandrescue.com • Toll Free (866) 825-2124
General Features • Lightweight Dupont Kevlar and composite resin shell offers superior strength and durability ™
®
Structural Helmets F3C Metro
AFR0107 Traditional
• Shell weighs less than competitive models • Composite resins offer higher temperature resistance (up to 600°F) without distorting or melting • High-gloss paint finish available in a variety of colors including hi-vis and photoluminescent • Ratchet headband with easy-to-adjust dial which accommodates a variety of head sizes (54 - 64cm) • Shell is not affected by UV rays • The Dupont Kevlar shell could last up to 10 years or longer when properly maintained ™
®
Bourke Traditional Standard Clear Lenses GSPAFD-C
Features • 2-point Nomex® chin strap made from fire resistant Nomex® webbing with quick-release nexus wideguard buckle and postman’s slide fastener • Polyurethane impact liner provides structural integrity and heat resistance and features an adjustable 6-point nylon head cradle with grain leather sweatband for comfort • 4” Paulson adjustable face shield - .110cm thick hard coated shield resists scratches • 2-ply Nomex® neck protector for ear and neck protection • Rear hanger with generous opening for easy storage • Reflective trim - each helmet comes with NFPA standard reflexite trim package for high visibility • The Traditional offers a stamped brass eagle to provide a traditional look with leather fronts (optional) AFR0107 Traditional Certified to NFPA 1971 - 2007, Compliant with ANSI Z89.1
F3CT
Compatible with both AFR0107 Traditional and F3C Metro helmet styles only. In the early 1960s, eye protection was not widely used among firefighters. That would change after a New York City firefighter was hit in the face with a piece of angle iron during a fire. That firefighter was Lester (Les) Bourke, and he worked at FDNY Engine Company 231 in Brooklyn. Les was working the hose line inside a burning auto repair garage, when the hose spray hit a piece of angle iron that was attached to the ceiling with a single bolt. The angle iron started swinging, and the end of it hit Les in the forehead – right under the brim of his fire helmet. The force of the hit knocked Les to the ground and left him momentarily blinded by the blood gushing from his forehead. Although the cut healed over time, Les was left with a desire to find a way to protect his eyes from dangerous objects he encountered while firefighting.
14439 eLED
The 14439 eLED torch by UK features unique dual-element projection optics that let you zoom (focus) from wide beam to an intense spot beam. O-ring sealed against water, mud and dust. LED will not break or burn out. Rubber covered push button thumb switch. Powered by 4 AA alkaline cells, (included). Also available 14120 Xenon
F3C Metro Certified to EN443: 2008 EN 14458, AS4067, NFPA 1971 - 2007, Compliant with EN433:1977 and ANSI Z89.1 F3CXL Certified to EN443: 2008 EN 14458, AS4067, NFPA 1971 - 2007, Compliant with EN433:1977 and ANSI Z89.1, Large Profile for Added Protection from Overhead Hazards F3CT Certified to EN443: 2008 EN 14458, AS4067, NFPA 1971 - 2007, Compliant with EN433:1977 and ANSI Z89.1, Built-in Torch Pod for HandsFree Lighting (torch not included)
Torch compatible with F3CT, F3CTXL, R5T (located on page 5) and R7GT (located on page 6)
F3CTXL Certified to EN443: 2008 EN 14458, AS4067, NFPA 1971 - 2007, Compliant with EN433:1977 and ANSI Z89.1, Large Profile for Added Protection from Overhead Hazards, Built-in Torch Pod for Hands-Free Lighting (torch not included)
alliancefireandrescue.com • Toll Free (866) 825-2124
3
Structural Helmets Features • Light Weight Kevlar®/Aramid Shell • Full Polyurethane Impact liner • Pacific ratchet adjustable cradle • 3 Point Nomex® Chin Strap • Pacific Quick Release Buckle • Internal Eye Protector (optional) • ESS Goggle Posts
F7A Jet
F10 Dual Certified
F10 - Dual Certified Certified to EN443: 2008 EN 14458, AS4067, NFPA 1971 - 2007, NFPA 1951 - 2007 Rescue/ Recovery, Compliant with EN433:1977 and ANSI Z89.1
Features • 3-point Nomex® chin strap made from fire resistant Nomex® webbing with quickrelease nexus wideguard buckle • Polyurethane impact liner provides structural integrity and heat resistance and has an adjustable 6-point nylon head cradle with grain leather sweatband for comfort • Internal retractable face shield is hard coated, resists scratches and is adjustable • 2-ply Nomex® neck protector with Velcro® fastening system protects wearer’s ears and neck • Reflective trim - each helmet comes with NFPA standard reflexite trim package for high visibility (7-piece NFPA wrap) F7A Certified to EN443: 1997, EN443: 2008 EN 14458, AS4067, Compliant with NFPA 1971 - 2007, EN433:1977 and ANSI Z89.1, Internal Retractable Face Shield F7AT Certified to EN443: 1997, EN443: 2008 EN 14458, AS4067, Compliant with NFPA 1971 - 2007, EN433:1977 and ANSI Z89.1, Internal Retractable Face Shield, Built-in Torch Pod for Hands-Free Lighting (torch not included) F7F Certified to EN443: 1997, EN443: 2008 EN 14458, AS4067, Compliant with NFPA 1971 - 2007, EN433:1977 and ANSI Z89.1, Internal Retractable Face Shield, Internal Retractable Eye Protector
Brushfire Helmets BR1
Features • 2-point Nomex® chin strap with quick-release buckle provides comfort and safety • Single-layer *Proban® neck protector is lightweight, flame retardant, launderable and provides heat resistance • Reflective trim for high visibility BR1 Certified to EN397, AS1801 Type 1 & 2, AS1801 Type 3, Compliant with ANSI Z89.1, Rear Hanger with Large Diameter for Easy Hanging and Storage, Ear Muff Clips BR1T Certified to EN397, AS1801 Type 1 & 2, AS1801 Type 3, Compliant with ANSI Z89.1, Rear Hanger with Large Diameter for Easy Hanging and Storage, Ear Muff Clips, Built-in Torch Pod for Hands-Free Lighting (torch not included)
BR7P
Features • 2-point polyester chin strap • Pacific ribbon cradle harness • ESS goggle strap mounts (BR7 option) • Reflective trim • Optional neck protector • Goggle Strap Clips (BR7P only) • Weighs Less than 17 oz (500 gm) BR7P Certified to NFPA 1977 - 2005 Wildlands, AS1801 Type 1 & 2, AS1801 Type 3, Compliant with ANSI Z89.1, Plastic Shell BR7 Certified to NFPA 1977 - 2005 Wildlands, AS1801 Type 1 & 2, AS1801 Type 3, Compliant with ANSI Z89.1, Kevlar® Shell
BR5 Certified to EN397, AS1801 Type 1 & 2, AS1801 Type 3, Compliant with ANSI Z89.1, Full Brim
* Proban® material is 100% cotton with a flame retardant finish that will withstand sparks and flames and passes BSEN531 and BSEN470-1.
4
alliancefireandrescue.com • Toll Free (866) 825-2124
General Features • Lightweight Dupont Kevlar and composite shell weighs less than competitive fiberglass and composite alternatives ™
USAR Rescue
Rescue
®
R5T
R3V3-KIWI USAR
• Shell is not affected by UV exposure • Composite resins offer higher temperature resistance (up to 600°F) without distorting or melting • High-gloss paint finish available in a variety of colors • Ratchet headband with easy-to-adjust dial, accommodates a variety of head sizes (54-64cm) Features • Poly Urethane Impact Liner with mesh cradle • Ratchet size adjuster 20.5-25.2 inches • 3 Point Nomex® chinstrap c/w Pacific Snapclip Buckle • ESS goggle mounting clips R3 KIWI USAR Certified to EN443: 2008 EN 14458, NFPA 1951 - 2007 Rescue/Recovery, AS1801 Type 1 & 2, Compliant with EN433:1977 and ANSI Z89.1, Flip-down Visor
New Mesh Liner from Pacific Helmets Currently, only the KIWI Series, A10 and F10 offer this new liner suspension from Pacific Helmets’. Eventually all new helmets designed will incorporate Pacific Helmets’ innovative inside liner suspension. This molded inner suspension system has been designed to provide superior impact protection, and allow snap-in straps that are easier to fit and replace.
R3 KIWI Certified to EN443: 2008 EN 14458, NFPA 1951 - 2007 Utility, NFPA 1951 - 2007 Rescue/ Recovery, AS1801 Type 1 & 2, Compliant with EN433:1977 and ANSI Z89.1
Features • 3-point polyester chin strap with quick-release buckle keeps helmet in place for rescue applications • Ratchet size adjuster 20.5-25.2 inches • New scallop-sided shell designed to accommodate a variety of ear muffs • Lightest weight helmet on the market • Built in torch pod – (torch sold separately) R5 Certified to EN397, AS1801 Type 1 & 2, Compliant with EN443, ANSI Z89.1 R5T Certified to EN397, AS1801 Type 1 & 2, Compliant with EN443, ANSI Z89.1, Built-in Torch Pod for Hands-Free Lighting (torch not included see pg 3)
R3V3 KIWI USAR Certified to EN443: 2008 EN 14458, Compliant with EN433:1977 and ANSI Z89.1
USAR Medical A10
Utility Helmet R5SL
The cradle is available in the traditional “6 ribbons” or a new “trampoline” mesh arrangement. The ratchet size system and headband are unchanged.
Features • Pacific ribbon cradle • Ratchet size adjuster 20.5-25.2 inches • 3 Point Nomex® chinstrap c/w Pacific Snapclip Buckle R5SL Certified to NFPA 1951 - 2007 Utility, AS1801 Type 1 & 2, Compliant with ANSI Z89.1
Features • Poly Urethane Impact Liner with mesh cradle • Ratchet size adjuster 20.5-25.2 inches • 3 Point Nomex® chinstrap c/w Pacific Snapclip Buckle • Eye protector 2mm c/w nose guard A10 Certified to EN443: 2008 EN14458, NFPA 1951 2007 Rescue/Recovery, Compliant with EN443: 1997, ANSI Z89.1
alliancefireandrescue.com • Toll Free (866) 825-2124
5
General Features • Lightweight Dupont Kevlar and composite resin shell weighs less than competitive fiberglass and composite alternatives ™
Water Rescue
®
WR7H
• Shell is not affected by UV exposure • Composite resins offer higher temperature resistance (up to 600°F) without distorting or melting • High-gloss paint finish available in a variety of colors • Ratchet headband with easy-to-adjust dial, accommodates a variety of head sizes (54-64cm) Features • 3-point polyester chinstrap with quickrelease buckle keeps helmet in place for rescue applications • Nine removable rubber plugs for water evacuation or ventilation • Internal retracting eye protector
Rescue R7G
WR7H Certified to EN397, Compliant with ANSI Z89.1, AS 1801 Type 1 & 2 WR7HV Certified to EN397, AS 1801 Type 1 & 2, Compliant with ANSI Z89.1, Dynamic Sealed Ventilation System
Water Rescue Features • 3-point polyester chinstrap with quick-release buckle keeps helmet in place for rescue applications • Internal retractable eye protector protects against hazards and blood borne pathogens • Ratchet size adjuster 20.5-25.2 inches • Certified to EN443 and compliant to ANSI Z89.1 and AS1808
WR5
R7G Certified to EN397, ANSI Z89.1 , Internal Retractable Eye Protector R7GT Certified to EN397, ANSI Z89.1, Internal Retractable Eye Protector, Built-in Torch Pod for Hands-Free Lighting (torch not included) R7H Certified to EN397, NFPA 1951 - 2007, AS1801 Type 1 & 2, Compliant with ANSI Z89.1, Rear Goggle Strap, Optional Internal Retracting Eye Protector
Features • 3-point polyester chinstrap with quickrelease buckle keeps helmet in place for rescue applications • Nine removable rubber plugs for water evacuation or ventilation WR5 Certified to EN397, AS 1801 Type 1 & 2, Compliant with ANSI Z89.1
6
alliancefireandrescue.com • Toll Free (866) 825-2124
Standards/Compliance Matrix
alliancefireandrescue.com • Toll Free (866) 825-2124
7
Eflare Safety Beacons Occupational Health and Safety • Will not burn personnel or uniforms • Does not produce toxic fumes • No risk of fire or explosion Operational Safety • Does not affect night vision • Does not exhibit point fixation • Does not affect distance judgment Environmental Pollution • Does not produce smoke and fumes • No chemical residue
Features • 360° high visibility led beacons - flashing and steady-on • Visible for more than 1km at night • Portable, safe, easy to use, cost effective (2 cents/hour) • Bright clear colors • Designed for use in Class 1, Division 2/ Zone 2 hazardous areas • Up to 40 hour battery life with low battery indicator • Tough and dependable with one year limited warranty • Can be submerged in water up to 100ft. Specifications • Beam colors available: red, amber, blue, green and white • Beam brightness: 15,000 - 25,000 millicandela • Max beam conspicuity: between horizontal and 10° above horizontal • Flash rate: 120 flashes per minute • Batteries: 2 alkaline D cells • Battery life: up to 40 hours at full brightness • Height: 8.0 inches (including base) • Weight: 1.00lb. (including batteries)
Eflare Models Available 939-EF300-A 4 LED Flashing, Amber Color 939-EF300-R 4 LED Flashing, Red Color 939-HZ610-A 8 LED Flashing/Steady-On Beacon, Amber Color 939-HZ610-R 8 LED Flashing/Steady-On Beacon, Red Color 939-HZ510-B 8 LED Flashing Beacon, Blue Color 939-HZ510-G 8 LED Flashing Beacon, Green Color 939-HZ510-W 8 LED Flashing Beacon, White Color 939-HZ520-A 8 LED Steady-On Beacon, Amber Color 939-HZ520-R 8 LED Steady-On Beacon, Red Color 939-HZ520-B 8 LED Steady-On Beacon, Blue Color 939-HZ520-G 8 LED Steady-On Beacon, Green Color 939-HZ520-W 8 LED Steady-On Beacon, White Color 939-HZ530-R/B 2 Color, 8 LED Flashing Beacon, Red and Blue 939-HZ530-R/W 2 Color, 8 LED Flashing Beacon, Red and White 939-HZ530-B/W 2 Color, 8 LED Flashing Beacon, Blue and White 939-HZ530-A/W 2 Color, 8 LED Flashing Beacon, Amber and White 939-HZ530-R/A 2 Color, 8 LED Flashing Beacon, Red and Amber
E Pyroteflare Beats c Strobehnic Flares & s in Sa fety!
Beacon Colors Available
White
8
alliancefireandrescue.com • Toll Free (866) 825-2124
Red
Amber
Blue
Green
Eflare Helicopter Landing Zone Kits Features • 4 units (red or amber) • 1 unit (blue) • Storage bag • 5 rubber bases • Laminated instruction card • Portable • No risk of fire • Indicates wind direction 939-HZ510-A-05AB 4 Amber Units, 1 Blue Unit 939-HZ510-R-05RB 4 Red Units, 1 Blue Unit
Optional Eflare Accessories
939-EFBASE Rubber Base
939-EFMAGCLIP Magnet Clip
939-EFFLCOLLAR Flotation Collar
939-EFHOOD Daylight Hood
939-EFCLIP Traffic Cone Clip
939-EFMAGBASE Magnet Base
939-EFBAG2 2-Pack Nylon Carry Bag 939-EFBAG4 4-Pack Nylon Carry Bag 939-EFBAG24 24-Pack Nylon Carry Bag
alliancefireandrescue.com • Toll Free (866) 825-2124
9
General Features
Wildfire
• Additional palm and thumb crotch reinforcement in critical wear area prolongs glove life • Liquid-proof liner protects against blood borne pathogens and bacteria while remaining flexible in subzero temperatures • Kevlar® stitching won’t support combustion • Interior leather hang tag loop facilitates fast drying and storage • Sentinel barrier is compliant with the requirements for resistance to common chemicals and for resistance to viral and blood borne pathogens as specified in the NFPA 1971-2007 Edition
UL Certified Structural 910-BT4
910-RGP7 Features • ResponseGuard™ gloves are made of a specially tanned side split cowhide for superior grip and tactile sensitivity even after repeated soakings • ResponseGuard Plus™ gloves are made of a specially tanned cowhide palm and elk grain back • The 4” 2-ply Kevlar® knitwrist and pull patch on the 910-RG5 and 910-RGP7 protects the critical wrist area and allows easy donning and doffing • The gauntlet cuff on the 910-RG6 and 910-RGP8 provides better fit in today’s new turnout gear • Available in sizes XS - XXXL 910-RG5 ResponseGuard™, Side Split Cowhide, Black and Tan Color, 4” 2-ply Kevlar® Knitwrist and Pull Patch 910-RG6 ResponseGuard™, Side Split Cowhide, Black and Tan Color, Gauntlet Cuff
Features • Gloves meet NFPA 1971 - 2007 Edition for Protective Ensemble for Structural Fire Fighting • Side split cowhide provides superior grip and tactile sensitivity even after repeated soakings • Self extinguishing fiber lining is flame resistant and provides thermal resistance, warmth and comfort • The 4” 2-ply Kevlar® knitwrist with pull patch on the 910-BT3 protects the critical wrist area and creates easy donning and doffing • The gauntlet cuff on the 910-BT4 provides better fit in today’s new turn-out gear • Available in sizes XS - XXXL
910-KCU1 Features • Constructed of undyed grain cowhide that is specially treated for heat and water resistance • The ultimate wildfire gloves in comfort, dexterity and abrasion resistance and will remain flexible after repeated soakings • The extra-long Kevlar® cuff with leather pull patch protects the critical wrist area and creates easy donning and doffing • Keystone thumb provides reinforcement, comfort and dexterity • Kevlar® stitching won’t support combustion and is 5x stronger than steel on an equal weight basis • Available in sizes XS - XXXL 910-KCU1 KCU1™, White Undyed Grain Cowhide, Kevlar® Cuff, Pull Patch
910-BT3 Black & Tan™, 4” 2-ply Kevlar® Knitwrist and Pull Patch 910-BT4 Black & Tan™, Gauntlet Cuff
910-RGP7 ResponseGuard Plus™, Cowhide Palm and Elk Grain Back, Red and Tan Color, 4” 2-ply Kevlar® Knitwrist and Pull Patch 910-RGP8 ResponseGuard Plus™, Cowhide Palm and Elk Grain Back, Red and Tan Color, Gauntlet Cuff
10
alliancefireandrescue.com • Toll Free (866) 825-2124
Clean-up
Extrication
911-AX9
120-MX2830
Features • Palm and thumb made from Amara® washable synthetic leather • Back is constructed of stretch fabric to provide snug fit for increased grip and finger control • Launderable 120-MX2820 Yellow and Black, S - XL
Features • Polyurethane and synthetic finger tips won’t melt and will withstand contact with hot materials up to 212°F (100°C) • Reinforced with Kevlar® stitching • Index finger and thumb joint reinforced to minimize wear • Puncture-resistant palm pads • Abrasion-resistant fingers and knuckles • Reflective & padded area on back of hand • Gloves do not get slippery when wet or harden after drying • Elastic cuff keeps out cut glass, etc. • Ultimate dexterity allows user to manipulate all rescue tool connections • Anatomically designed palms for unparalleled freedom of movement • Machine washable • Available in Sizes S - XL
911-AX9
Important Note The 120-MX2820, 120-MX2830, 120-MX2840, 120-MX2805 and 911-AX9 are not blood borne pathogen-resistant gloves. For safety, the wearer must use them with a Latex or similar disposable glove. These gloves are not fire fighting gloves and are not approved by NFPA for structural or wildland fire fighting. NFPA does not have an approval rating for extrication gloves.
120-MX2830 Blue and Black, S - XL 120-MX2840 Red and Black, S - XXL 120-MX2805 Black, S - XXL
62-327PF
Disposable Latex EMS Gloves Features • Economical liquid proof protection • Powder-free • 13 mil. thickness • 12” length • Fully textured palm and finger grip • Ambidextrous • Packed 50 gloves per dispenser box • Available in sizes S - XL
Applications • Excellent for use in EMT, fire and first responders
62-327PF Certified to NFPA 1999 Standards on protective clothing for emergency medical operations, 2003 Edition
alliancefireandrescue.com • Toll Free (866) 825-2124
11
Gear Bags
Odyssey® II
StrikeTeam™
Wildla Certifiend d!
903-GB651
937-80222
903-GB653 Alliance Fire and Rescue, Inc. takes pride in the quality products that we offer first responders. Our selection of gear bags is no exception. Our extra-large, step in bags are ideal for all of your turn out gear and accessories. Features • “U-shaped” metal stays on the top of the bag help keep the bag open for quick and easy donning and doffing of turn out gear • Separate interior pocket is ideal for storing SCBA mask, helmet, or wet gear • Exterior pocket for accessories • Additional interior pass-through pocket for equipment stowage • 2” wide strapping supports extra weight • Adjustable contoured padded shoulder strap provides comfort and keeps bag in position when carried • Extra-heavy tarp-style bottom with 5 raised cleats provide superior abrasion resistance to prolong bag life and help keep gear dry • Fully launderable 903-GB651 28”(L) x 22”(H) x 16 ½”(W), Red 903-GB652 28”(L) x 22”(H) x 16 ½”(W), Blue 903-GB653 Wheeled Gear Bag 28”(L) x 22”(H) x 16 ½”(W), Red
Features • High Temperature Material • Sealed “Dual” Scratch-Resistant, Anti-Fog, UV absorbing polycarbonate lens • Closed cell foam forms a snug seal preventing smoke from entering the goggle • Non-vented body, offering best protection against liquids and dust • Fits over prescription eyewear • Meets ANSI Z87.1-2003 Standards • Meets CAN/CSA-Z94.3 Standards • NFPA 1977-2005 Certified • Optional carrying pouch available 937-80222 Wildland Certified Goggle
Features • One-piece wrap around strap made of 26mm-wide high-memory elastic • Patented Speed Clip™ strap system makes strap adjustment quick and easy, even with gloves on • Frame made from high heat-resistant materials • Full-perimeter ventilation and filtration system allows humidity to escape while filtering out dust, smoke and particles • Lenses feature ESS ClearZone™ anti-fog and anti-scratch lens coatings 937-ESS01CB StrikeTeam™ Wildland Goggle
X-Tricator™
Innerzone 2™
937-ESS01CBEX
937-ESS01GY2-WF
Features • Patented Snap-on/Snap-off™ mounting system allows goggles to be stowed in front or rear of helmet, or quickly removed and stored in pocket • Strap grommets snap on and off the mounting brackets • The X-Tricator™ can be used on a helmet alone or together with flip-downs or a face shield • Frame made from high heat-resistant materials • Lenses feature ESS ClearZone™ anti-fog and anti-scratch lens coatings
Features • Patented Snap-on/Snap-off™ mounting system allows goggles to be stowed in front or rear of helmet, or quickly removed and stored in pocket • Strap grommets snap on and off the mounting brackets • The Innerzone 2™ can be used on a helmet alone or together with flip-downs or a face shield • Full-perimeter ventilation and filtration system allows humidity to escape while filtering out dust, smoke and particles • Lenses feature ESS ClearZone™ anti-fog and anti-scratch lens coatings
937-ESS01CBEX X-Tricator™ Rescue Goggle
12
937-ESS01CB
937-ESS01GY2-WF Innerzone 2™ Fire Goggle
alliancefireandrescue.com • Toll Free (866) 825-2124
FlashFire™
Fusalage
Hi-Voltage DC
250-60-0626
250-50-0420
fuselage Dust Goggle
250-22-0000
™
Features • Soft rubber temple and bridge pads provide a comfortable and secure fit • Black frame with gray foam • Detachable temples and strap (included) can be changed in seconds, no tools required
Features • All FlashFire™ styles meet the require ments of ANSI Z87+ • All lenses are hard coated polycarbonate with anti-fog coating 250-60-0626 Silver Frame with Blue Pads, Blue Mirror Lens 250-60-0628 Black Frame with Red Pads, Silver Mirror Lens
250-22-0000 Black Frame, Clear Hard Coat Lens 250-22-0002 Black Frame, Indoor/Outdoor Lens
250-60-0625 Silver Frame with Red Pads, Red Mirror Lens
250-22-0001 Black Frame, Gray Lens
250-50-0420 Clear Hard Coat, Anti-fog Lens
250-60-0630 Silver Frame with Green Pads, Green Mirror Lens
250-50-0421 Gray Hard Coat, Anti-fog Lens
250-60-0620 Silver Frame with Blue Pads, Clear Lens
250-50-0429 Amber Hard Coat, Anti-fog Lens
250-60-0020 Black Frame with Red Pads, Clear Lens
Hi-Voltage Megawatt
Features • Excellent safety with maximum style • Adjustable spatula temples for a secure fit • Flexible ribbed nose piece for maximum comfort and fit • Wrap around lens design eliminates distortion 250-20-0000 Semi-Rimless, Black Frame, Clear Hard Coat Lens 250-20-0001 Semi-Rimless, Black Frame, Gray Lens 250-20-0007 Semi-Rimless, Black Frame, Gold Mirror Lens 250-20-0002 Semi-Rimless, Black Frame, Indoor/Outdoor Lens
250-22-0500 Gunmetal Gray Frame, Clear Hard Coat Lens 250-22-0502 Gunmetal Gray Frame, Indoor/Outdoor Lens 250-22-0501 Gunmetal Gray Frame, Gray Lens
Zenon Z28
Zenon Z12 250-01-0002
250-20-0000
Features • Semi-rimless design with wrap around lens • Ratchet temples for better angle adjustments • Indoor/Outdoor lenses available
Features • Rimless design for light weight • Relaxed bridge design fits most wearers • Thin, flexible temples provide secure fit without uncomfortable pressure points • CE certified
250-03-0000
Features • “Over-The-Glass rimless eyewear • Can also be worn as a safety glass by itself • Adjustable temples for a more accurate fit 250-03-0000 Black Temples, Clear Hard Coat Lens
250-01-0002 Black Temples Only, Indoor/Outdoor Lens
250-03-0080 Black Temples, Clear Non-Coated Lens
250-01-5509 Amber Temples Only, Amber Hard Coat Lens
250-03-0001 Black Temples, Gray Lens
Custom imprinting available on select eyewear styles, call for details...
alliancefireandrescue.com • Toll Free (866) 825-2124
13
“SHERIFF” SAFETY VEST
“FIRE” SAFETY VEST Features • Mesh top and solid bottom CLASS • 5 point breakaway system • Zipper front • Breakaway zipper front • Microphone tabs on left and right chest • Adjustable sides • “Fire” printed on the front and back • Color Lime yellow and red • Sizes: S/M, L/XL, 2X/3X, 4X/5X SG-PSV-RED ANSI 207-2006 - PUBLIC SAFETY VEST - Class 2
Features • Mesh top and solid bottom CLASS • 5 point breakaway system • Breakaway zipper front • Pen pocket • Microphone tabs on left and right chest • Adjustable sides • “Sheriff” printed on the front and back • Color Lime yellow and brown • Sizes: S/M, L/XL, 2X/3X, 4X/5X
2
SG-PSV-BRN ANSI 207-2006 - PUBLIC SAFETY VEST - Class 2
“POLICE” SAFETY VEST
Features • Mesh top and solid bottom CLASS • 5 point breakaway system • Breakaway zipper front • Pen pocket • Microphone tabs on left and right chest • Adjustable sides • “Police” printed on the front and back • Color Lime yellow and blue • Sizes: S/M, L/XL, 2X/3X, 4X/5X
2
SG-PSV-BLU ANSI 207-2006 - PUBLIC SAFETY VEST - Class 2
14
alliancefireandrescue.com • Toll Free (866) 825-2124
2
ECONOMY - SOLID VEST
Features • 2” reflective tape: two horizontal stripes and two vertical stripes • Flame retardant treated fabric (up to 12 washes) • Background material meets NFPA 701 (2004) • Hook and loop fastening • Silver reflective tape CLASS 2 • Color lime yellow • Sizes: M - 5XL SG-WCENG-FR ANSI 107-2004 - ECONOMY VEST - CLASS 2
UNIVERSAL - MESH VEST
ECONOMY - SOLID VEST
Features • Background material is treated to meet NFPA 701 (2004) • Flame retardant treated mesh fabric (up to 12 washes) • Single horizontal stripe with contrast, two shoulder stripes with contrast • Color lime yellow • Sizes: All (universal fit) CLA
Features • 2” reflective tape: two horizontal stripes, two vertical stripes and two sleeve stripes • Flame retardant treated fabric (up to 12 washes) • Background material meets NFPA 701 (2004) • Hook and loop fastening CLASS • Silver reflective tape 3 • Color lime yellow • Sizes: M - 5XL
SS 2
SG-USV5-FR LY ANSI 107-2004 - MESH VEST - CLASS 2
REVERSIBLE BOMER JACKET
Features • Heavyweight 100% polyester with PU coating • Water repellent • Fully reversible bomber jacket CLASS • 4 exterior pockets 3 • Storm cuffs with velcro adjustment • When worn alternate way black body • Full utility belt access to zip on both sides • Colors: Hi-Viz Orange (SG-PSRJKT-OR) or, Lime Yellow (SG-PSRJKT-LY) • Sizes M - 5XL
SG-HSSV-FR LY ANSI 107-2004 - ECONOMY SOLID VEST - CLASS 3
CREW NECK T-SHIRT
Features • Economy, Crew Neck T-Shirt • Polyester sports knit • Left chest pocket • Moisture wicking fabric • Silver reflective tape • Color lime yellow • Sizes M - 5XL
CLASS
3
SG-CNTS-E ANSI 107-2004 - CREW NECK T-SHIRT - CLASS 3
SG-PSRJKT ANSI 107-2004 - PUBLIC SAFETY FULLY REVERSIBLE BOMBER JACKET - CLASS 3
alliancefireandrescue.com • Toll Free (866) 825-2124
15
General Features Alliance Fire and Rescue, Inc. uses a variety of fibers to create the highest quality knitted “sock” style hoods that provide the wearer with protection from flash fire hazards. The 2-ply construction adds thermal insulation in cold weather conditions.
Structural Fire Hoods 906-100NOM7
906-2080NOL7BLK
Nomex® Protective barrier. A key factor in the thermal protection Nomex® provides is that it carbonizes and thickens when exposed to the intense heat of today’s fires. This increases the protective barrier between the heat source and the skin and minimizes burn injury. This tough, protective barrier stays supple and flexible until it cools, which gives you valuable extra seconds of protection when you need it most. Nomex® Durability. Garments made from Nomex® are also durable — lasting, on average, two to three times longer than most other standard and protective fabrics, including 100% cotton, polyester/garment blends and FRT cotton. In fact, industrial launderers estimate that the average wear life of protective apparel made of Nomex® is approximately five years, and that it can be washed and worn at least 125 times. Comparatively, garments made of FRT cotton can be washed and worn an average of only 36-50 times. Lenzing FR is a specialty viscose fiber. The abbreviation FR stands for “flame resistant”. Lenzing FR® is a natural fiber derived from wood. It offers protection from heat and flame in a variety of different applications. Unique thermal insulation properties combined with permanent flame resistance make Lenzing FR® a “Heat Protection Fiber”. It offers protection from all kinds of heat and its functional properties help to prevent heat stress and heat stroke.
Features • 100% Nomex® • Excellent for flash protection and limited chemical splash protection • Superior wear and durability • Our most popular hood 906-100NOM7
TPP Rating 24.4 (Thermal Protective Performance)
906-2080NOL7
Features • 20% Nomex® and 80% Lenzing FR® • This fabric combination provides comfort and breathability • The most cost effective solution to your NFPA requirements 906-2080NOL7BLK TPP Rating 21.5 (Thermal Protective Performance)
906-8416CT
®
Features • 20% Nomex® and 80% Lenzing FR® • This fabric combination provides comfort and breathability • The most cost effective solution to your NFPA requirements
Features • 84% Carbon and 16% Technora® • Carbon Fiber is light weight and provides excellent fire resistance • Technora® adds strength, durability, and helps hood retain its shape when laundered
906-2080NOL7
906-8416CT
TPP Rating 21.5 (Thermal Protective Performance)
TPP Rating 27.4 (Thermal Protective Performance)
Lenzing FR® keeps the body dry and cool. Heat stress and heat stroke can be avoided.
16
alliancefireandrescue.com • Toll Free (866) 825-2124
Benzalkonium Chloride 0.13%
X3 clean is the safe alternative to alcohol-based gel hand sanitizers: Safe - Non-Flammable, Non-Toxic, Non-Corrosive Gentle - Alcohol free, fragrance free, and residue free Effective - Kills 99.99% of germs 3X More - Get three times the number of
applications per ounce compared to gel sanitizers
Save! - Reduce absenteeism by 30% Fact: 80% of all infections are transmitted by hands. The answer seems simple. Wash your hands and reduce the risk of infection and illness.
Reality: Life is busy. Access to soap and water isn’t always possible.
183-10010
183-10003
183-10112
Solution: X3 Clean Foaming Hand Sanitizer kills germs in less than 15 seconds when handwashing isn’t possible. Cleanser Products
183-10002 X3 Clean Personal Size Foaming Spray Bottle, 2.5 Oz 183-10003 X3 Clean Counter Top Foaming Spray Bottle, 1 Liter 183-10004 X3 Clean Economy Refill, 4 Liters (1.05 Gallons) 183-10006 X3 Clean Cartridge Filled Bottle, 1Liter, Non Refillable 183-10009 X3 Clean Mini Spray Bottle, 0.27 Oz 183-10010 X3 Clean Counter Top Foaming Spray Bottle, 8.4 Oz 183-10112 X3 Clean Mini Spray Counter Box, 0.27 Oz 183-10014 X3 Clean Travel Size Spray, 2.0 Oz 183-10020 X3 Clean Mini Spray (Carded in Tray), 0.27 Oz 183-10070 X3 Clean Empty Refillable Cartridge 183-10090 X3 Clean Wall Bracket For 1 Liter Counter Top Bottle, White 183-10094 X3 Clean Clear Holder for 8.5 Oz (#10010)
183-10006
Dispensers
183-10085
183-10090
183-10080 X3 Clean Cartridge Wall Dispenser Manual, White 183-10085 X3 Clean Cartridge Wall Dispenser Touchless, White
N95 Respirator Features • Meets all NIOSH standards • High filtration efficiency for protection in a variety of environments • Low breathing resistance and soft inner surface for comfort • Clear and simple fitting instructions make these easy to put on • Adjustable outside nosepiece to fit most individuals comfortably • Secure head straps for a proper fit • Some masks have exhalation valves for hot and humid work conditions
270-2000 N95 Cone Respirator
270-3000 N95 Flat Respirator
270-2050 N95 Cone Respirator with Valve
270-3050 N95 Flat Respirator with Valve
Disposable Nuisance Dust Mask 270-1000 Lightweight and comfortable, this is the economical choice for use in non-toxic applications such as sanding, grinding and cleaning; anywhere nuisance dust exists.
alliancefireandrescue.com • Toll Free (866) 825-2124
17
Portable Radio Solutions by: Throat Microphone • Part Number XTM 1-N4 • Fully sealed single transducer • IP57 waterproof design • Adjustable neck strap • Interchangeable ear pieces
Ear Microphone • XEM 2-N4 • Generic design for comfort • Ideal for use with respirators
Bone Conduction Kit
Speaker Mic IP67 Rated • Part Number XSM2 • Heavy duty fire service mic • IP67 rated waterproof • Heavy duty Kevlar® reinforced cable
• Part Number XHK/BC-N4 • Fits to any helmet with harness • Bone conduction microphone • Ear phone speaker • Easy to fit • Can be used with respirators
Fire Service Push-To-Talk • Part Number XPTT2 • Large rubber PTT button • Waterproof design
Speaker Mic Hi-Vis • Part Number STM • Hi-vis impact resistant case • Replaceable radio cable • Available for all professional radios
Mobile Radio Solutions by: XMK-1 Mobile Interface • Remote foot pedal PTT jack • Push-to-talk (PTT) in the mobile kit housing • Interchangeable Mobile Radio Cables • Headset jack • Optional remote PTT jack
SR50 - Vox Interface
XHBH-E Behind Head
When push to talk is not an option for your mobile radio applications choose the SR50 VOX interface. made of a solid aluminum case. Easy to adjust VOX sensitivity.
• Exclusive patented PNR™ audio technology • Certified 24Db NRR • Universal 5-pin 2-way radio connection • Soft touch 1,000,000 cycle sealed PTT • Tuned dynamic noise cancelling mic • Powerful Neodymium speakers • Rugged cables with durable polyurethane insulation • Spiral shielding reduces RF interference • Cloth mic muff protects mic from moisture and debris
- Hand held PTT - Steering wheel PTT - Velcro Mount PTT
XCAM Interface Cables • 10431 - Mobile radio extension (3 feet) • 10432 - Mobile radio extension (6 feet) • P0730 - Remote PTT radio extension (3 feet)
18
XPTT4 - Dash PTT Hole-mount steering wheel or dash mount push-to-talk. Threaded black plated brass housing, sealed red PTT button and special twisted pair urethane coil cord. Cord is 30 inches uncoiled with industry standard 3-pin connector.
alliancefireandrescue.com • Toll Free (866) 825-2124
RUBBER INSULATING GLOVES Class
Length
Color
Style #
00
11”
Black
160-00-11
00
11”
Yellow
157-00-11
00
14”
Black
160-00-14
00
14”
Yellow
157-00-14
0
11”
Black
160-0-11
0
11”
Yellow
157-0-11
0
14”
Black
160-0-14
0 1
14” 14”
Yellow Black
157-1-14 160-1-14
1
14”
Yellow
157-1-14
1
16”
Black
160-1-16
1 2 2 2 2
16” 14” 14” 16” 16”
Yellow Black Yellow Black Yellow
157-1-16 160-2-14 157-2-14 160-2-16 157-2-16
When Marigold rubber insulating gloves are used in good condition and within the specified voltage limits, they will provide you the protection required to complete your job safely. Determine the maximum voltage that you will be exposed to during your work prior to choosing the appropriate class of glove.
Class 00 - 2 sizes available 7 - 12
Leather Protectors (Cover Glove) Description
Class
Sizes
Style #
10” Goatskin Driver Cuff
Class 00 - 0
7-12
148-1000
13” Goatskin Gauntlet Cuff
Class 00 - 0
7-12
148-2000
12” Cowhide Gauntlet Cuff
Class 1 - 2
7-12
148-4000
12” Goatskin Gauntlet Cuff
Class 1 - 2
7-12
148-5000
14” Goatskin Gauntlet Cuff
Class 1 - 4
7-12
148-6000
Leather Protectors are to be used only for mechanical protection for rubber insulating gloves and mittens and shall not be used for electrical protection per ASTM F696-02. The correct length of leather protectors is found in ASTM F496-06.
Rubber insulating gloves and leather protectors should always be worn when performing extrication work on electric cars.
Storage Bags
(For Rubber Insulating Gloves) Description
Size
Color
Style #
Canvas Glove bag
11”
Natural
148-M69002
Canvas Glove bag
14”
Natural
148-M69003
Canvas Glove bag
16”
Natural
148-M69004
Canvas Glove bag
18”
Natural
148-M69005
Yellow class 00 rubber insulating gloves shown with 10” goatskin driver cuff, leather protectors.
alliancefireandrescue.com • Toll Free (866) 825-2124
19
26 Computer Drive East 518.861.0133 (ph)
•
16314 02993
$1.95
6
Albany
866.825.2124 (toll free)
alliancefireandrescue.com (web)
6
•
•
• •
NY 12205 518.861.0144 (fx)
sales@alliancefireandrescue.com (e-mail)
2-2010 / 5,000
© 2010 Protective Industrial Products, Inc.