HEADPAINT > INSTRUCTIONS FOR USE FIRST AID: If poisoning occurs immediately contact a doctor or Poison Information Centre: Australia 131 126 / New Zealand 0800 76476 / United Kingdom 0845 4647 / United States 1800 222 1222 PRELIMINARY SKIN ALLERGY TEST: To determine whether an allergy or hypersensitivity exists, a preliminary skin allergy test should be performed. The following test should be made 48 hrs. before every application. 1) Using soap and water, wash an area about 1in (2.5cm) in diameter on the inside of the elbow or behind the ear, touching the hairline. Pat area dry with cotton wool. 2) Prepare a test solution by mixing equal parts Fudge Catalyst Peroxide with the exact shade to be used. 3) Apply mixture to the area using absorbent cotton tipped applicator. 4) Permit area to dry. Do not cover or disturb for 48 hrs. 5) Examine the test area after 48 hrs. If no reaction has occurred, proceed with hair colouring. 6) DO NOT USE hair colour if any of the following danger signs appear: burning, itching, swelling, eruptions, irritation, redness, rash or abnormal reaction. If these signs appear in or around the test area, at any time during the test period, it indicates the person is allergic or hypersensitive to the colour. Remove existing skin allergy test patch colour immediately and cleanse area thoroughly with soap and water. In addition, this product should not be applied if the scalp shows evidence of cuts, abrasions, eruption, open wounds or any other abnormal condition.
INSTRUCTIONS FOR USE: 1: COLOUR SELECTION: Once you have discussed your client’s needs, refer to Fudge Paint Guide for colour selection. 2: MIXING AND DEVELOPMENT TIME: Fudge HeadPaint Selection Guide MIXING RATIOS
CATALYST
USAGE
DEVELOPMENT
Headpaint 1:1.5
10 vol- 3%
Same depth/Darker/Grey Coverage
30 mins
Headpaint 1:1.5
20 vol – 6%
1 level lighter/Grey Coverage
35 mins
Headpaint 1:1.5
30 vol – 9%
2-3 levels lighter/Grey Coverage
40 mins
Headpaint 1:1.5
40 vol- 12%
3-4 levels lighter/Grey Coverage
45-55 mins
Ultra Light1:2
30 vol – 9%
4 levels lighter
Up to 60 mins
Ultra light 1:2
40 vol – 12%
5 levels lighter
Up to 60 mins
Demi Colour 1 : 1.5
No Lift Catalyst
Deposit Only/ Tone on Tone
20 mins
3. HEADPAINT APPLICATION: Mix (1:1.5) Headpaint or Headpaint Ultra Light 1:2) add Headpaint Colour into a bowl and add Fudge Catalyst Crème Developer, mix thoroughly with brush until smooth. FIRST TIME APPLICATION: Apply the Fudge Headpaint colour mix approx. 1-2 cms from the scalp, starting with the most resistant area. Develop for 20 mins. Then apply fresh colour mix to the root area. Develop for 30 mins. RE-TOUCH APPLICATION: Apply Fudge Headpaint Colour mix to regrowth area only. Develop for 30 mins. Apply colour mix or Demi colour mix through mid-lengths and ends if required. Develop for 10 mins. FIRST TIME APPLICATION FOR ULTRA LIGHT BLONDE: Apply Ultra Light Blonde Mix approx. 1-2 cms from the scalp. Develop 30 mins. Then apply fresh colour mix to the root area. Develop for up to 60 mins. RE-TOUCH APPLICATION FOR ULTRA LIGHT BLONDE: Apply Ultra Light Blonde colour mix to regrowth area only. Develop for up to 60 mins. Refresh if required. COLOUR REMOVAL: At the basin apply a small amount of lukewarm water and gently massage the scalp, emulsify and rinse, particularly around hairline and the nape of the neck. Ensure colour is completely removed from the scalp area. Apply Fudge Colour Lock shampoo to remove any colour residue. Rinse and apply Fudge Colour Lock Conditioner. Apply 1 Shot Treatment. Style and dry as desired.
HEADPAINT SHADOWS > INSTRUCTIONS FOR USE 1: COLOUR SELECTION: Once you have discussed your client’s needs, refer to Fudge Paint Guide for colour selections. 2: MIXING AND DEVELOPMENT TIME: Fudge HeadPaint Shadows Selection Guide MIXING RATIO
CATALYST
DEVELOPMENT
Headpaint Shadows 1:1.5
10 vol – 3%
35 mins
Headpaint Shadows Demi 1:1.5
No Lift Catalyst
20 mins
3. HEADPAINT SHADOWS APPLICATION: Mix Headpaint Shadows colour into a bowl and add Fudge catalyst. Mix thoroughly with a brush until smooth. Apply to dry unwashed hair utilising the desired foiling method. Avoid contact with the scalp. 4. COLOUR REMOVAL: At the basin gently rinse excess colour residue. Rinse and apply Fudge Colour Lock conditioner. Apply 1 Shot Treatment. Dry and Style as desired.