Door Systems - Wind

Salice Wind

Lift System

Salice Wind is an innovative lift-up door systems that is easy to install and adjust, is compact, and available in soft-close or push-to-open versions. Consistent door and cabinet setout simplifies the design and specification.

• Soft closing or push to open option available

• Door height from 220mm to 600mm

• Door weight up to 25kg

• 85° - 94° opening angle (Selectable)

• Adjustable spring strength

• Sold per door set

• Black or white covers available. (Ordered separately)

• Extra bracket to be used in conjunction with standard Salice Wind system when fixing to the top of a cabinet

• Can also be used to allow the installation of additional systems on very large doors

• Refer to strength charts on page 92 to select the correct colour springs for your application.

• Door weight can be calculated for 18mm thick MDF door by: Height of door (in meters) x Width of door (in meters) x 14

Part No. Strength Code Spring Colour

SAL.WDSC1W W 1 x White

SAL.WDSC1Y D 1 x Yellow

SAL.WDSCY.FG I 2 x Yellow

SAL.WDSCB.FG F 2 x Black

SAL.WDSCR.FG S 2 x Red

SAL.WDPO1W W 1 x White

SAL.WDPO1Y D 1 x Yellow

SAL.WDPOY.FG I 2 x Yellow

SAL.WDPOB.FG F 2 x Black

SAL.WDPOR.FG S 2 x Red

Covers

SAL.WDCV.MBL.FG White

SAL.WDCV.WH.FG Matt black

83

Part No. Strength Code Spring Colour Part No. Finish Soft close mechanisms Push to open mechanisms Catch & retaining catch recommended - see page 96

Flap door lift system fixed to the cabinet sides.

• Drilling of the door ø35.

• 13 mm deep cup.

• 85° opening with stop device (premounted).

• 94° opening without stop device.

• Possible drilling distance on the door (K): from 3 to 7 mm.

Drilling Patterns

84

Installation Instructions Salice Wind

K D1 3 = 16 4 = 17 5 = 18 6 = 19 7 = 20 T= 16 17 18 19 20 21 22 23 24 25 26 27 28 K=3 A=min 0 0.1 0.1 02 0.2 0.3 0.5 0.6 0.7 0.9 1.1 1.8 2.7 K=4 A=min 0 0.1 0.1 02 0.2 0.3 0.4 0.6 0.7 0.9 1.1 1.3 2.1 K=5 A=min 0 0.1 0.1 02 0.2 0.3 0.4 0.6 0.7 0.9 1.1 1.3 1.5 K=6 A=min 0 0.1 0.1 02 0.2 0.3 0.4 0.6 0.7 0.9 1.1 1.2 1.5 K=7 A=min 0 0.1 0.1 02 0.2 0.3 0.4 0.6 0.7 0.8 1.0 1.2 1.4

Space needed to open the door

Fixing the plates to the cabinet sides

Fixing the cups to the door

Deploying the system to the cups This operation is tool free

Installing the system to the plates. Insert the system until back fixing is engaged. This operation is tool free.

85 Installation Instructions Salice Wind

L R

Installing the covers

Adjustments

1. Adjustment of the spring strength.

2. Adjustment of the decelerating effect.

3. Extension/adjustment of opening angle of door.

WARNING! Security cable ties. Remove the cable ties only at the end of the assembly. Use the instructions and the QR Code attached to the systems.

4. Height adjustment of the door from - 2 to +2.

5. Sideways adjustment of the door from - 2 to+2.

6. Depth adjustment of the door from - 1 to +3.

86 Installation Instructions Salice Wind

Removal of the covers

Disconnecting the system from the cups. This operation is tool free.

Disassembly of the system. Press the back lever and pull out the system. This operation is tool free.

87 Installation Instructions Salice Wind

Salice Wind

Installation Instructions

• Extra bracket to be used in conjunction with standard Salice Wind system when fixing to the top of a cabinet

• Can also be used to allow the installation of additional systems on very large doors

• Supplied in a set of 2 brackets with covers

• Mechanisms must be ordered separately.

Drilling Patterns

Space needed to open the door

88

K D1 3 = 13 4 = 14 5 = 15 6 = 16 7 = 17 T= 16 17 18 19 20 21 22 23 24 25 26 27 28 K=3 A=min 0 0.1 0.1 02 0.2 0.3 0.5 0.6 0.7 0.9 1.1 1.8 2.7 K=4 A=min 0 0.1 0.1 02 0.2 0.3 0.4 0.6 0.7 0.9 1.1 1.3 2.1 K=5 A=min 0 0.1 0.1 02 0.2 0.3 0.4 0.6 0.7 0.9 1.1 1.3 1.5 K=6 A=min 0 0.1 0.1 02 0.2 0.3 0.4 0.6 0.7 0.9 1.0 1.2 1.5 K=7 A=min 0 0.1 0.1 02 0.2 0.3 0.4 0.6 0.7 0.8 1.0 1.2 1.4 Part No. Finish SAL.WDSBK.WH White SAL.WDSBK.MBL Matt black

For cabinets that require a third system