Storg Technical Guide

Technical Guide

Precise living

Storg

Live the way you want with Storg’s range of new organisational storage solutions and smart waste & laundry systems, offering a complete range of quality products that really do create a place for everything!

Designed with simplicity in mind, Storg’s stylish and functional products help your cabinetry achieve organisational zen, empowering you to take control of precise living. Life is simple and simplicity is elegant!

invites you to declutter, reduce stress and improve your quality of life.

Do not use powered screw drivers for adjustment.

FITTINGS

12 of 4x16 mm Self-tapping screws

8 of 3,9x13 mm Self-tapping screws

4 of M5x8 mm Self-tapping screws

COMPONENTS

A. Basket

B. Set slides left

C. Door brackets

D. Bottles dividers

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive.

TOOLS

Storg Elska Side Mounted Roll Out

• Soft close 15kg rated full-extension slides

• Slides mount on left hand side of cabinet

• Solid melamine base with wire rail

• Minimum internal cabinet depth: 505mm

• Minimum internal cabinet height: 540mm

12 of 4x16 Self-tapping screws

Attach slides to cabinet following the dimensions shown.

8 of 3,9x13 Self-tapping screws

Attach the door brackets following the dimensions shown.

Hook the door brackets onto the mounting screws and tighten.

4 of M5x8 Self-tapping screws

Insert bottles dividers (D).

Do not use powered screw drivers for adjustment.

FITTINGS

14 of 4x16 Self tapping screw

6 of 6,3x12 Euro screw

8 of 3,9x13 Self tapping screw

2 of M6x10 Machine screw

2 of M6 Washer

COMPONENTS

A. Basket

B. Set slides

C. Door brackets

D. Slides bracket kit

E. Cabinet side thickness spacer kit 18/20 mm

F. side thickness spacer kit 16/19 mm

G. Cover caps

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive.

TOOLS

Storg Elska 2 Tier Roll Out

• Load capacity: 15kg per shelf

• Soft close full extension slides

• Optional bottle holders/dividers available (purchase separately)

• 2 x Fixed solid base melamine shelves with wire rail

• Minimum internal cabinet depth: 505mm

• Minimum internal cabinet height: 520mm

8 of 4x16 Self tapping screw

Attach slides (B) to the sides of the cabinet following the dimensions shown.

NB: Position of slides (B) is optional according to the installation specifics. They can be mounted in top, bottom or diagonally opposite position.

8 of 4x16 Self tapping screw

Fix the door brackets (C) to the rear of the door following the dimensions shown.

Choose the correct cabinet side spacer kit (E or F) depending on the cabinet side thickness. Insert the parts in the slides brackets kit (D) as shown.

Screw the slide bracket (D) onto the shelf using the euro screws.

NB: Place the Side brackets (D) on the shelves according to how the sides (B) were previously placed (see step 1).

Pre-assemble the two M6x10 machine screws and washers as shown in fig H, then mount the door and tighten the screws as shown in fig I.

Slide the baskets onto the slides and ensure they click into place.

4 of 6,3x12 Euro Screw

2 of M6x10 Machine screw

Loosen the four screws M6x10 “L”, turn the screw “M” as shown to adjust the door up and down

Loosen the four screws M6x10, to adjust the door forward and back.

Loosen the door bracket mounting screws to adjust the door to the right and left and insert the four cover caps as shown.

OPTIONAL

Insert bottle dividers (when purchased)

Do not use powered screw drivers for adjustment.

FITTINGS

12 of 4x16 mm Self-tapping screws

4 of 6.3x14 mm Euro-screw

COMPONENTS

A. Basket

B. Grass slides

C. Cover kit for Grass slides

D. Spacers

E. 16/18 mm Thickness side cabinet spacers (16/18 mm)

F. 19/20 mm Thickness side cabinet spacers (19/20 mm)

G. Cover caps

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive.

Storg Elska Pull-Out Drawer

• Soft close 40kg rated full-extension slides

• Solid melamine base with wire rail

• Basket height: 160mm

• Minimum internal cabinet depth: 505mm

Screw the spacers (D) on the hinge side of the cabinet following the directions given and then screw the slides (B) on the spacer (D).

NB: use n. 4 spacers for the cabinet of mm. 900

Choose the component (E) or (F) depending on the Thickness of the cabinet. Put the component into the cover (D) and fix it on the bottom by using the euroscrew.

ES SIDE 18MM

Pull out the slides (B) and hang the baskets (A) on the slides; insert the cap (H) as in the picture.

Do not use powered screw drivers for adjustment.

FITTINGS

2 of M6x40 Button head machine screw

2 of M5x14 Socket head machine screw

35 of 4x16 Self-tapping screw

COMPONENTS

A. Back Frame

B. Front Frame

C. Slide Kit

D. Soft close kit

E. Plastic Support

F. Rotation bracket

G. Plastic guide

H. Door slide bracket

I. Drag Lever

L. Junction

M. Cap with pin

N. Basket hook kit

O. Plastic drilling guide

P. Baskets set

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive.

TOOLS

Storg Elska Swing-Out Pro Larder

• Load capacity: 8kg per inner shelf, 4.5kg per outer shelf

• Soft open/close

• Universal mounting

• Solid base melamine shelves with wire rail

• Weight of door baskets is supported by the frame independant from the door hinges

• Minimum internal cabinet depth: 470mm

Mechanism is supplied in the left hand version. Follow step 1 to swap to right hand version.

Move the cap with pin (M) and the junction (L), as in (fig 1) on the front frame. Move the small plate along with the pin into the right side of the back frame (fig 2). Swap ball and pin to opposite sides as shown on the junction (L) (Fig 3)

2 of M5x14 Socket head machine screw

FIG 1

FIG 1

FIG 2

FIG 3

20 of M4x16 Self-tapping screw

Attach the Slide kit (C), the plastic support (E), the soft close kit (D) and the plastic slide (G) following the dimensions shown.

LH drawing shown

Use the plastic drilling guide (O) to mark positions for plastic supports,

Screw the back frame (A) into the slide kit (C) and fix the drag levers (I) as shown.

Put the back frame (A) into the plastic guide (G) and the lower slide (C) as shown.

Assemble the slide cover by using the 2 socket head screws provided

Put the front frame (B) into the pre-assembled plastic supports (E) and then attach the third plastic support on the top bracket as shown.

2 of M5x14 Socket head machine screw

4 of 4x16 Self-tapping screw

Fix the drag levers (I) with the specific provided hardware.

Assemble the soft close kit (D) when the mechanism is closed.

ST22SPT.450.CPWH 390 1660

ST22SPT.500.CPWH 440

ST22SPT.600.CPWH 540

ST22SPS.450.CPWH 390 1084

ST22SPS.500.CPWH 440

ST22SPS.600.CPWH 540

Fit the door slide bracket (H) dimensions shown.

Assemble the basket hooks (N) and the baskets (P).

8 of M4x16 Self-tapping screw

Do not use powered screw drivers for adjustment.

COMPONENTS

25 of 6,3x14 Euro screw

2 of M6x20 Machine Screw

1 of M6x25 Machine screw

3 of M5x15 Washer head machine screw

1 of 3mm Allen Key

PARTS

A. Lower frame

B. Upper frame

C. Bottom slide

D. Upper runner

E. Door bracket

F. Door bracket frame

G. Door bracket bush

H. Door bracket adjuster

I. Locking pins

L. Door bracket cover caps

M. Installation template

N. Drilling template

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive.

TOOLS

Storg Elska Pull-Out Pantry

• Load capacity: 120kg

• Full extension slides with soft close

• Height adjustable shelves

• Solid base melamine shelves with wire rail

A

B

7 of 6,3x14 Euro screw

Pre-drill for euro screws at the indicated dimensions with a 5mm bit, or using the drilling template (N) mark screw positions. Securely fix the bottom slide (C) in position, ensuring that the fixings are adequate for the intended load.

WARNING

Ensure bottom slide (C) is securely fixed, especially at the back of the slide.

3 of M6.3x14 Euro screw

Pre-drill for euro screws the upper side of the cabinet with a 5mm diameter bit as shown, or using the drilling template (N) mark the screw positions. Fix the upper slide (D) in position.

2 of M6x20 Machine Screw

Fit the adjusting screws on the bottom slide (C) as shown.

Loosen the grub screws on the lower frame (A) and slide the upper frame (B) into the top slide as shown. Use the installation template (M) to set the height of the upper frame (B) and tighten the grub screws to lock the frame in position.

FIG. 1

FIG. 2

Fit the frame (A) onto the bottom slide (C) and fix in place with the central screw.

Install the door bracket bushes (G) as shown (Fig1 - Fig2) at the positions indicated in step 7 (below)

8 Install the door bracket frames (F) using the door bracket adjuster (H) and the m5x15 washer head machine screws at the 3 positions shown.

3 of M5x15 Washer head machine screw

FIG. 1

FIG. 2

OK!

9

Check height of bracket positions set in step 8 and match with the measurements in fig1. Measure and mark screw positions using the dimensions given. Attach the door brackets (E) to the door and hook the brackets (E) into the door bracket frames (F) as shown in fig2 - fig3

Modular cabinet width Z

L 300 235

L 400 335

L 450 385

FIG 1

of 6,3x14 Euro screw

FIG 2

FIG 3

Make adjustments using the appropriate screws, as shown. Once all adjustments have been made install the 2 locking pins (I) in the centre door bracket only. Fit door bracket cover caps (L) to all 3 door brackets as shown.

To make frame tilt and height adjustment (H), screw or unscrew the front and rear screws. Once adjusted, fix everything by tightening the centre screw.

Basket removal

Do not use powered screw drivers for adjustment.

COMPONENTS

24 of 3,5x18 Self-tapping screws

1 of M6x16 Machine screw

1 of M6x25 Machine screw

3 of M5x15 Washer head Machine screw

6 of 6.2x13.5 Euro screw

1 of 3mm Allen key

PARTS

A. Bottom frame

B. Top frame

C. Bottom slide

D. Top Slide

E. Door bracket

F. Fixing support

G. Cover

H. Basket with basket support kit

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive. TOOLS

Storg Elska Pull-Out Narrow Pantry

• Load capacity: 80kg

• Full extension slides with soft close

• Height adjustable shelves

• 5 x Solid base melamine shelves with wire rail

• Minimum internal cabinet depth: 505mm

• Internal cabinet height: 1880mm-2180mm

Install the bottom slide C and the top slide D, with the 3.5x18 screws, as shown

Pre-assemble the M6x16 and the M6x24 machine screws in the bottom slide as shown.

20 of 3.5x18 Self-tapping screws

1 of M6x16 Machine screw

1 of M6x24 Machine screw

Bottom Slide Top Slide

Install the frame in to the bottom slide (C). Fix the frame on the bottom slide (C) by tightening the M6x24 screw, as shown.

Loosen the grub screws (on the frame A) and slide up the frame (B). Fix the frame (B) at the indicated height by tightening the grub screws (N). Slide the frame into the top slide (D) until “CLICK!” sound is heard. Pull the frame all the way out to check it is properly located.

6 of 6.2x13.5 Euro screw

Choose the position of the middle door bracket (E) (see measurement L), then pre-drill all bracket positions Ø5x12mm at the following measurements given. Pre-assemble the 6.2x13.5 euro screws leaving the heads protruding..

Table 1

Possible positions of centre bracket.

Mount the fixing support (F) at the same height as door brackets.

7 Mount the door bracket (E) to the frame and fix with the M5x15 washer head machine screws.

3 of M5x15 Washer head Machine screw

Hook the door onto the door brackets (E), then tighten the six 6.2x3.5 euro screws.

Adjust the side screws of the door bracket (E) to adjust the door right and left.

Loosen the washer head machine screws holding the door bracket frame and adjust the eccentric screw on the bottom of frame (A) to adjust the door up and down. Tighten bracket screws to fix in position.

Turn the M6x16 and M6x24 screw on the bottom Slide (C) to adjust the angle of the door.

Install the cover (G) as shown.

Basket Removing

Do not use powered screw drivers for adjustment.

FITTINGS

4 of M6x40 machine screw

2 of M5x14 machine screw

24 of 4x16 Self-tapping screw

COMPONENTS

A. Frame

B. Bottom slide

C. Lateral slide

D. Lateral slide guide

E. Door bracket

F. Hook for baskets

G. Baskets

H. Door bracket cover set

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasives. Do not lubricate bearings or slides.

TOOLS

Storg Elska Gourmet Pantry

• Load capacity: 12kg per shelf

• Soft close

• Universal mounting

• Optional door brackets to be used with Shaker Doors (purchase seperately, 1 set per door)

• 5 x Solid base melamine shelves with wire rail

• Minimum internal cabinet depth: 470mm

• Minimum internal cabinet height: 1880mm

Choose the door opening direction and then screw the lateral slide guide (D) to the frame (A) by using the two screws M5x14, so that the guide is on the hinge side of the frame.

Ensure base of cabinet is adequately supported.

Install the lateral slide (C) onto the side of the cabinet following the measurements shown.

2 of M5x14 machine screw

4 of 4x16 Self-tapping screw

Fix the bottom slide (B) on the bottom of the cabinet following the dimensions shown on the hinge side of the cabinet.

Insert the frame (A) and fix it by using the four screws M6x40, as shown.

6 of 4x16 Self-tapping screw

4 of M6x40 machine screw

As indicated, install the hooks (F) into the frame and finally hang the baskets as shown.

Install the door brackets (E) on the door following the dimensions shown and clip them into the frame (A). Install the covers (H), as shown in the pictures.

6 of 4x16 Self-tapping screw

Do not use powered screw drivers for adjustment.

FITTINGS

4 of M6x40 machine screw

2 of M5x14 machine screw

24 of 4x16 Self-tapping screw

COMPONENTS

A. Frame

B. Bottom slide

C. Lateral slide

D. Lateral slide guide

E. Door bracket

F. Hook for baskets

G. Baskets

H. Door bracket cover set

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasives. Do not lubricate bearings or slides.

TOOLS

Storg Elska Pull-Out Cloud Unit

• Soft open/close

• Solid base melamine shelves with wire rail

• Left & right hand available

• Load capacity 25kg per shelf

• Modular cabinet width: 900mm

• Minimum internal cabinet width: 860mm

• Minimum internal cabinet depth: 490mm

• Minimum internal cabinet height: 640mm

• Minimum door size: 450mm

Do not use powered screw drivers for adjustment.

FITTINGS

2 of M6x35 Socket head machine screw

8 of 4x16 Self tapping screw

1 Allen key

COMPONENTS

A. Bottom mounting plate

B. Rotating cover

C. Upper socket

D. Tube

E. Backing plate

F. Basket

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive.

TOOLS

Storg Elska Lazy Susan

• Load capacity: 14kg per shelf evenly distributed

• 360deg rotation

• Height adjustable shelves

• Solid base melamine shelves with wire rail

• Modular cabinet width: 900x900mm

• Shelf diameter: 800mm

• Internal cabinet height: 685-730mm

Part Number ST22LZP.900.CPWH

Attach the bottom mounting plate (A) to the cabinet base in the position shown.

Insert the tube (D) in the rotating cover (B), then insert everything into the bottom mounting plate (A).

Screw the upper socket (C) on the top of the cabinet ensuring the post is plumb.

Insert the basket (F) in the tube, and screw it in place tightening the screw into the backing plate (E).

2 of M6x35 Socket head machine screw

• Load capacity: 10kg per inner shelf

• 7.5kg per outer shelf

• Soft open/close

• Left & right hand available

• Solid base melamine shelves with wire rail

• Modular cabinet width: 900mm

• Internal cabinet width: 860-1000mm

• Minimum internal cabinet depth: 505mm

• Minimum internal cabinet height: 600mm

Do not use powered screw drivers for adjustment.

FITTINGS

27 of 4x16 Self-tapping screws

COMPONENTS

A. Rear frame

B. Lateral bracket

C. Side frame

D. Lower bushing

E. Upper bushing

F. Stop bracket

H. Door bracket

I. Centre pivot

L. Post-connectors

M. Linking arm

N. Cover caps

O. Marking template

P. Basket hooks (inside basket box)

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive.

TOOLS

Dimensions and diagrams show installation for right hand unit. For left hand installation, dimensions are opposite.

Pre-drill cabinet following the dimensions shown or use the marking template to mark screw positions.

6 of 4x16 Self-tapping screws

Attach the bottom track of the rear frame (A) to the positions given (fig 1).

Mount the upper part of the rear frame (A) to the bottom track (fig 2)

Extend the arms and fix in place (fig 3).

Tighten the grub screws to lock the arms (fig 4). Remove transport tabs and discard (fig 5)

9 of 4x16 Self-tapping screws

Mount the lateral bracket (B) and the stop bracket (F) into the positions shown by following the dimensions or marking the positions using the marking template (O).

FIG 1

FIG 2

FIG 3

FIG 4

FIG 5

Push the lower bushing (D) into the hole in the stop bracket (F) as shown.

Fit the top pins of the side frame (C) into position in the lateral bracket (B) as shown (fig 1)

Lower the bottom pin of the frame into the bush in the stop bracket (F) (Fig 3)

Fit the upper bushing (E) and turn until the tab locks into place.

FIG 1

FIG 2

FIG 3

Slide the plain end of the centre pivot (I) into the guide at the bottom of the side frame (C) and fix in the position previously marked.

Using the post connectors (L) clip the linking arm (M) into the centre pivot (I) and the 4th or 5th hole of the rear frame (A) as shown.

9 Mark out the door using the marking template (O) or by following the dimensions shown and attach the door brackets (H)

8 of 4x16 Self-tapping screws

Mount the door brackets (H) onto the side frame (C) and tighten the locking screws.

Tighten locking screws after adjustments are complete.

Loosen locking screws to make adjustments as shown.

Use the set screw in the stop bracket (F) to adjust the opening angle.

Install the cover caps (N) as shown.

Insert the basket hooks (P) into the frames (A, C) and install the baskets,

• Complete waste bin kit including slides, bin frame, bins, lid/shelf and door mounting brackets

• Soft Closing overextension slides with 40kg load rating

• Highly durable metal cover which doubles as a shelf

• 3D Front adjustment to door

• Orion Grey finish (OGY)

Do not use powered screw drivers for adjustment.

FITTINGS

12 of 3.9x13 Self tapping screw pan head

8 of 4x16 Self tapping screw countersunk head

4 of M4x5 Special machine screw

2 of M6x10mm Pan head machine screw

2 of M6 Washer

COMPONENTS

A. Metal frame

B. Kit Grass slides (pair)

C. Slide cover

D. Lid holder (Pair)

E. Lid

F. Door fixing brackets

G. Door bracket cover

H. Stopper

I. Wastebin 35L

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive. Plastic waste bins can be washed with warm water and mild detergent. Allow to dry completely before use.

TOOLS

Storg Safna 56 Series Waste Bin System to suit 300mm Cabinets

Fix the Grass slides (B) and the lid holder (D) according to the dimensions shown.

Clip the slide Covers (C) into the Grass slides (B).

4 of 3.9x13 Self tapping screw pan head 8 of 4x16 Self tapping screw countersunk head

Screw the metal frame (A) into the slide cover (C) by using the specific provided screws.

4 of M4x5 Special machine screw

4 of M4x5 Self tapping screw pan head

Attach the door fixing brackets (F) according to the dimensions shown.

of M6x10mm Pan head machine screw

Pre-assemble the M6x10 screws and washers then mount the door on the slide covers (C) as shown.

2

2 of M6 Washers

7

Adjust the door up and down by turning the

Adjust the door inclination to the front or to the back, then tighten the two M6x10 screws.

eccentric screw.

Storg Safna 56 Series Waste Bin System to suit 400mm Cabinets 1 x Bin

• Complete waste bin kit including slides, bin frame, bins, lid/shelf and door mounting brackets

• Soft Closing overextension slides with 40kg load rating

• Highly durable metal cover which doubles as a shelf

• 3D Front adjustment to door

• Orion Grey finish (OGY)

Do not use powered screw drivers for adjustment.

FITTINGS

12 of 3.9x13 Self tapping screw pan head

8 of 4x16 Self tapping screw countersunk head

4 of M4x5 Special machine screw

2 of M6x10mm Pan head machine screw

2 of M6 Washer

COMPONENTS

A. Metal frame

B. Kit Grass slides (pair)

C. Slide cover

D. Lid holder (Pair)

E. Lid

F. Door fixing brackets

G. Door bracket cover

H. Stopper

I. Wastebin 35L

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive. Plastic waste bins can be washed with warm water and mild detergent. Allow to dry completely before use.

TOOLS

Fix the Grass slides (B) and the lid holder (D) according to the dimensions shown.

Clip the slide Covers (C) into the Grass slides (B).

4 of 3.9x13 Self tapping screw pan head 8 of 4x16 Self tapping screw countersunk head

Screw the metal frame (A) into the slide cover (C) by using the specific provided screws.

4 of M4x5 Special machine screw

4 of M4x5 Self tapping screw pan head

Attach the door fixing brackets (F) according to the dimensions shown.

2 of M6x10mm Pan head machine screw

2 of M6 Washers

Pre-assemble the M6x10 screws and washers then mount the door on the slide covers (C) as shown.

Adjust the door inclination to the front or to the back, then tighten the two M6x10 screws.

Adjust the door up and down by turning the eccentric screw.

Storg Safna 56 Series Waste Bin System to suit 400mm Cabinets 2 x Bins

• Complete waste bin kit including slides, bin frame, bins, lid/shelf and door mounting brackets

• Soft Closing overextension slides with 40kg load rating

• Highly durable metal cover which doubles as a shelf

• 3D Front adjustment to door

• Orion Grey finish (OGY)

Do not use powered screw drivers for adjustment.

FITTINGS

12 of 3.9x13 Self tapping screw pan head

8 of 4x16 Self tapping screw countersunk head

4 of M4x5 Special machine screw

2 of M6x10mm Pan head machine screw

2 of M6 Washer

COMPONENTS

A. Metal frame

B. Kit Grass slides (pair)

C. Slide cover

D. Lid holder (Pair)

E. Lid

F. Door fixing brackets

G. Door bracket cover

H. Stopper

I. Wastebin 32L

I. Wastebin 24L

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive. Plastic waste bins can be washed with warm water and mild detergent. Allow to dry completely before use.

TOOLS

Fix the Grass slides (B) and the lid holder (D) according to the dimensions shown.

Clip the slide Covers (C) into the Grass slides (B).

4 of 3.9x13 Self tapping screw pan head 8 of 4x16 Self tapping screw countersunk head

Screw the metal frame (A) into the slide cover (C) by using the specific provided screws.

4 of M4x5 Special machine screw

4 of M4x5 Self tapping screw pan head

Attach the door fixing brackets (F) according to the dimensions shown.

2 of M6x10mm Pan head machine screw

Pre-assemble the M6x10 screws and washers then mount the door on the slide covers (C) as shown.

2 of M6 Washers

Adjust

Adjust

the door inclination to the front or to the back, then tighten the two M6x10 screws.

the door up and down by turning the eccentric screw.

Storg Safna 56 Series Waste Bin System to suit 450mm Cabinets

• Complete waste bin kit including slides, bin frame, bins, lid/shelf and door mounting brackets

• Soft Closing overextension slides with 40kg load rating

• Highly durable metal cover which doubles as a shelf

• 3D Front adjustment to door

• Orion Grey finish (OGY)

Do not use powered screw drivers for adjustment.

FITTINGS

12 of 3.9x13 Self tapping screw pan head

8 of 4x16 Self tapping screw countersunk head

4 of M4x5 Special machine screw

2 of M6x10mm Pan head machine screw

2 of M6 Washer

COMPONENTS

A. Metal frame

B. Kit Grass slides (pair)

C. Slide cover

D. Lid holder (Pair)

E. Lid

F. Door fixing brackets

G. Door bracket cover

H. Stopper

I. Wastebin 35L

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive. Plastic waste bins can be washed with warm water and mild detergent. Allow to dry completely before use.

TOOLS

Fix the Grass slides (B) and the lid holder (D) according to the dimensions shown.

Clip the slide Covers (C) into the Grass slides (B).

4 of 3.9x13 Self tapping screw pan head 8 of 4x16 Self tapping screw countersunk head

Screw the metal frame (A) into the slide cover (C) by using the specific provided screws.

4 of M4x5 Special machine screw

Attach the door fixing brackets (F) according to the dimensions shown.

Pre-assemble the M6x10 screws and washers then mount the door on the slide covers (C) as shown.

4 of M4x5 Self tapping screw pan head

2 of M6x10mm Pan head machine screw 2 of M6 Washers

Adjust

Adjust

the door inclination to the front or to the back, then tighten the two M6x10 screws.

the door up and down by turning the eccentric screw.

Storg Safna 56 Series Waste Bin System to suit 500mm Cabinets

• Complete waste bin kit including slides, bin frame, bins, lid/shelf and door mounting brackets

• Soft Closing overextension slides with 40kg load rating

• Highly durable metal cover which doubles as a shelf

• 3D Front adjustment to door

• Orion Grey finish (OGY)

Do not use powered screw drivers for adjustment.

FITTINGS

12 of 3.9x13 Self tapping screw pan head

8 of 4x16 Self tapping screw countersunk head

4 of M4x5 Special machine screw

2 of M6x10mm Pan head machine screw

2 of M6 Washer

COMPONENTS

A. Metal frame

B. Kit Grass slides (pair)

C. Slide cover

D. Lid holder (Pair)

E. Lid

F. Door fixing brackets

G. Door bracket cover

H. Stopper

I. Wastebin 35L

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive. Plastic waste bins can be washed with warm water and mild detergent. Allow to dry completely before use.

TOOLS

460-468 Min.505

Fix the Grass slides (B) and the lid holder (D) according to the dimensions shown.

Clip the slide Covers (C) into the Grass slides (B).

4 of 3.9x13 Self tapping screw pan head 8 of 4x16 Self tapping screw countersunk head

Screw the metal frame (A) into the slide cover (C) by using the specific provided screws.

4 of M4x5 Special machine screw

Attach the door fixing brackets (F) according to the dimensions shown.

Pre-assemble the M6x10 screws and washers then mount the door on the slide covers (C) as shown.

4 of M4x5 Self tapping screw pan head

2 of M6x10mm Pan head machine screw 2 of M6 Washers

Adjust

Adjust

the door inclination to the front or to the back, then tighten the two M6x10 screws.

the door up and down by turning the eccentric screw.

Storg Safna 56 Series Waste Bin System to suit 600mm Cabinets

• Complete waste bin kit including slides, bin frame, bins, lid/shelf and door mounting brackets

• Soft Closing overextension slides with 40kg load rating

• Highly durable metal cover which doubles as a shelf

• 3D Front adjustment to door

• Orion Grey finish (OGY)

Do not use powered screw drivers for adjustment.

FITTINGS

12 of 3.9x13 Self tapping screw pan head

8 of 4x16 Self tapping screw countersunk head

4 of M4x5 Special machine screw

2 of M6x10mm Pan head machine screw

2 of M6 Washer

COMPONENTS

A. Metal frame

B. Kit Grass slides (pair)

C. Slide cover

D. Lid holder (Pair)

E. Lid

F. Door fixing brackets

G. Door bracket cover

H. Wastebin 8L

I. Wastebin 35L

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive. Plastic waste bins can be washed with warm water and mild detergent. Allow to dry completely before use.

TOOLS

Fix the Grass slides (B) and the lid holder (D) according to the dimensions shown.

Clip the slide Covers (C) into the Grass slides (B).

4 of 3.9x13 Self tapping screw pan head 8 of 4x16 Self tapping screw countersunk head

Screw the metal frame (A) into the slide cover (C) by using the specific provided screws.

4 of M4x5 Special machine screw

4 of M4x5 Self tapping screw pan head

Attach the door fixing brackets (F) according to the dimensions shown.

of M6x10mm Pan head machine screw

Pre-assemble the M6x10 screws and washers then mount the door on the slide covers (C) as shown.

2

2 of M6 Washers

Adjust the door up and down by turning the eccentric screw.

Adjust the door inclination to the front or to the back, then tighten the two M6x10 screws.

Storg Safna 59 Series Laundry System to suit 450mm Cabinets

• Complete laundry hamper kit including slides, hamper frame, hampers with lids and door mounting brackets

• 2 x 30L plastic laundry hampers with lids and zebra pattern cut-out holes

• Soft Closing overextension slides with 40kg load rating

• 3D Front adjustment to door

• Minimum internal cabinet width: 410mm

• Minimum internal cabinet height = 580mm

• Minimum internal depth = 555mm

• Modular Cabinet Width = 450mm

Do not use powered screw drivers for adjustment.

FITTINGS

12 of 3.9x13 Self tapping screw pan head

8 of 4x16 Self tapping screw countersunk head

4 of M4x5 Special machine screw

2 of M6x10mm Pan head machine screw

2 of M6 Washer

COMPONENTS

A. Metal frame

B. Kit Grass slides (pair)

C. Slide cover

D. White laundry bin 30L

E. Orion grey laundry bin 30L

F. Door fixing brackets

G. Door bracket cover

H. Stopper

MAINTENANCE

Clean with a soft, dry cloth. Avoid using solvents or abrasive. Plastic waste bins can be washed with warm water and mild detergent. Allow to dry completely before use.

TOOLS

Fix the Grass slides (B) according to the dimensions shown.

Clip the slide Covers (C) into the Grass slides (B).

Screw the metal frame (A) into the slide cover (C) by using the specific provided screws.

4 of M4x5 Special machine screw

Attach the door fixing brackets (F) according to the dimensions shown.

Pre-assemble the M6x10 screws and washers then mount the door on the slide covers (C) as shown.

6 of 3.9x13 Self tapping screw pan head

2 of M6x10mm Pan head machine screw

2 of M6 Washers

Adjust

7 Adjust the door inclination to the front or to the back, then tighten the two M6x10 screws.

the door up and down by turning the eccentric screw.