BL H 41

HYDROMETTE®

BL H 41

In co-operation with:

The Hydromette® BL H 41 is a measuring device for determining the moisture content of wood and, in particular, of wood fibre insulants. The meter features 6 new characteristic curves for wood fibre insulants, grouped according to the gross density of the material (in kg/m³) and the board manufacturing process (wet/dry).

This device is suited for everyone who processes or assesses wood fibre insulants. With the BL H 41 a facade can be checked prior to plastering to ensure that future moisture-induced damage - e.g. flaking of plastering or lignin exudation - is avoided.

The sets contain special insulated electrode nuts that reduce the impact of surface moisture.

MEASURING RANGE n WOOD MOISTURE 5 – 40 % (dry mass) n WOOD FIBRE INSULATING BOARDS 4.5 to 45 % (dry mass) n TEMPERATURE COMPENSATION -10 to +40°C

The new characteristic curves are based

on products by these manufacturers:

In co-operation with:

PROPERTIES n 7-level wood species correction (more than 300 types) n Wood temperature compensation is done manually or automatically in the range from

M 20 drive-in electrode with special insulated electrode nuts that reduce the impact of surface moisture

10 to +40 °C through the unit temperature n Storage of the 5 most recent measured values n Optional: 2 customer-specific characteristic curves may be programmed in factory n 185 mm [L]

SET 1 contains the M 20 drive-in elecrode

M 18 M 20 M 20-OF 15 M 20-HW 200/300 M 19

M 19 push-in electrode with insulated electrode pins (60 mm) for measuring in finished thermal insulation composite systems

For packages, please refer to page 34.