MARBLE SLAB WALL, SPEC: BIANCO LASA/ COVELANO FANTASTICO. POLISHED CHROME FRAMEWORK WITH MITRED CORNERS.
POLISHED CHROME FRAMEWORK WITH MITRED CORNERS.
MARBLE SLAB WALL, SPEC: BIANCO LASA/ COVELANO FANTASTICO.
LEATHER INSET.
LEATHER INSET WITH 5MM POLISHED CHROME TRIM TO BE FLUSH WITH MIRROR DOOR.
LIGHT FIXTURE MOUNTED ON THE BACK OF CABINET DOOR TO BE FLUSH WITH BACK SURFACE
REBATED WIRE MANAGEMENT FED FROM THE HINGED SIDE OF CABINET CO-ORDINATE WITH LIGHTING DESIGNERS PACKAGE FOR DETAILS
BEVELED MIRRORED DOOR WITH 5MM THICK POLISHED CHROME TRIM.
ADJUSTABLE GLASS SHELVES.
OPAQUE LENS MOUNTED FLUSH WITH REFLECTIVE SIDE OF MIRROR ADJUSTABLE GLASS SHELVING
LIGHT FIXTURE MOUNTED ON THE BACK OF CABINET DOOR CO-ORDINATE FIXTURE AND WIRING DETAIL WITH LIGHTING DESIGNERS PACKAGE
REBATE FOR LED STRIP LIGHT CHANNEL FOR INTERNAL LIGHTING. DIMENSIONS TBC. STRIP LIGHT TO BE FLUSH WITH FACE OF CABINET.
5MM THICK POLISHED CHROME HANDLE TO SIT WITHIN TRIM. REFER TO DETAIL 1. 5MM THICK POLISHED CHROME HANDLE TO SIT WITHIN TRIM. REFER TO DETAIL 1. LENS COVER TO SIT FLUSH WITH MIRRORED SURFACE
DOOR CONTACT SWITCH TO BE MOUNTED ON THE SAME SIDE AS THE FINGER PULL CO-ORDINATE WITH LIGHTING DESIGNERS PACKAGE FOR DETAILS
POLISHED CHROME FRAMEWORK WITH MITRED CORNERS.
02
MASTER BATHROOM - MIRROR CABINET DETAIL - PART PLAN SCALE 1:5
B
03
MASTER BATHROOM - MIRROR CABINET DETAIL - SECTION BB SCALE 1:5
04
DETAIL 1 - HANDLE DETAIL SCALE 1:2
MIRROR CABINET TO BE RECESSED INTO WALL. HIGH GLOSS LACQUER INTERIOR CARCASS. DOOR CONTACT TO BE MOUNTED ON THE SAME SIDE AS FINGER PULL REBATE IN CABINET EDGE FOR WIRING RUN ADJUSTABLE SHELVING. LED STRIP ATTACHED TO THE OUTER EDGE OF CABINET DOOR FRAME
MARBLE SLAB WALL, SPEC: BIANCO LASA/ COVELANO FANTASTICO. POLISHED NICKEL FRAMEWORK. MIRRORED DOOR WITH 5MM THICK POLISHED CHROME TRIM.
01
MASTER BATHROOM - MIRROR CABINET DETAIL - PART PLAN SCALE 1:5
GENERAL NOTES: 1. 2. 3. 4.
5.
6.
DO NOT SCALE DRAWINGS FOR CONSTRUCTION PURPOSES. ALL DIMENSIONS TO BE CHECKED ON SITE BEFORE FABRICATION. 7. CONTRACTOR AND/OR SUBCONTRACTOR AND/OR SUPPLIER IS REQUIRED TO INFORM ANY ERRORS, DISCREPANCIES AND OMISSIONS OR QUESTIONS TO KPL PROJECT DESIGNER. IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO CO-ORDINATION ALL/ ANY MEP 8. REQUIREMENTS WITH MEP CONSULTANTS DRAWINGS TO FABRICATION. COMPLIANCE WITH LOCAL AND NATIONAL BUILDING STANDARDS ARE TO BE ADHERED TO. ALL BRITISH/ 9. EU STATUTORY REQUIREMENTS ARE TO BE MAINTAINED. IT IS THE RESPONSIBILITY OF THE CONTRACTOR AND HIS/ HER SUB TO VERIFY ALL DIMENSIONS ON SITE. 10. ALL DRAWINGS & DESIGNS ARE COVERED BY COPYRIGHT/DESIGN RIGHT, AND MAY NOT BE DISTRIBUTED, COPIED OR ISSUED WITH THE THE WRITTEN PERMISSION OF KATHARINE POOLEY. ALL DESIGN CONCEPTS ARE THE SOLE PROPERTY OF KATHARINE POOLEY AND NO ADAPTATIONS, REPRODUCTIONS OR COPIES MAY BE MADE WITHOUT WRITTEN PERMISSION OF KATHARINE POOLEY.
THESE DRAWINGS ARE SUBJECT TO ANY VARIATION REQUIRED OR RECOMMENDATION BY ANY STATUTORY AUTHORITY, OR FOR THE BETTER REQUIREMENTS, BRITISH STANDARDS AND EU STANDARDS. SAMPLES TO BE PROVIDED BY MAIN CONTRACTORFOR DESIGNER'S APPROVAL. ALL FINISHES TO DESIGNER'S SATISFACTION. .DESIGNER SHOULD APPROVE ALL SHOP DRAWINGS PRIOR TO MANUFATURE AND BEFORE ANY INSTALLATION CAN TAKE PLACE ON SITE. THIS COPY HAS BEEN MADE BY OR WITH THE AUTHORITY OF KATHARINE POOLEY PURSUANT TO SECTION 47 OF THE COPYRIGHT DESIGNS AND PATENTS ACT 1988. UNLESS THAT ACT PROVIDES A RELEVANT EXCEPTION TO COPYRIGHT, THE COPY MUST NOT BE COPIED WITHOUT THE PRIOR PERMISSION OF THE COPYRIGHT
SHEET NOTES:
REVISIONS:
·
By
· · ALL RIGHTS (INCLUDING COPYRIGHT AND DESIGN RIGHT) ARE RESERVED TO KATHARINE POOLEY LIMITED UNLESS EXPRESSLY AGREED OTHERWISE IN WRITING "ALL KATHARINE POOLEY'S (KPL) WORK IS UNDERTAKEN STRICTLY ON THE BASIS OF KPL STANDARD CONDITIONS OF SALE AND ALL PURCHASES ARE STRICTLY ON THE BASIS OF KPL STANDARD TERMS & CONDITIONS OF PURCHASES"
© Katharine Pooley Limited
·
·
ALL DIMENSIONS TBC BY SITE SURVEY. SLAB SIZE INDICATIVE, TBC BY SUPPLIER. FOR SANITARY FIXTURE & FITTINGS PLEASE REFER TO PLUMBING FIXTURE SCHEDULE. FOR SPECIALIST FINISHES INCLUDING STONE REFER TO STONE SCHEDULE. ALL FINISHES TO MATCH KPL/CLIENT APPROVED SAMPLE.
No.
Date
DETAILS Description
Client
PRIVATE CLIENT Project
VILLA AL SUMAIT
DRAWING INFO Title
1ST FLOOR MASTER MIRROR CABINET DETAILS Scale
KUWAIT
Dwg. No.
1:5@A-1 Date
Address
ID-130/346
12/08/13 Drawn
EB Checked
Revision No.
XX ACAD Ref.
CAD-REF
W
V
U T
S
R
Q
U T
S
R
Q
A-A FIRST FLOOR - BEDROOM 5 - SECTION A-A SCALE 1:20
15
13
13
C-C FIRST FLOOR - BEDROOM 5 - SECTION C-C SCALE 1:20
Q
R
S
T U
V
W
D-D FIRST FLOOR - BEDROOM 5 - SECTION D-D SCALE 1:20
14
13
DOOR MOVED
15
14
V
B-B FIRST FLOOR - BEDROOM 5 - SECTION B-B SCALE 1:20
15
14
W
D-D FIRST FLOOR - BEDROOM 2 - SECTION D-D SCALE 1:20
A-A FIRST FLOOR - BEDROOM 2 AND DRESSING ROOM - SECTION A-A SCALE 1:20
B-B
A-A
12
C-C
C-C
B-B C-C FIRST FLOOR - BEDROM 2 - DESK AND JOINERY UNIT - SECTION C-C SCALE 1:20
11
10
B-B
B-B
A-A