34-220
IEC Contactors & Starters IT. Electro-Mechanical March 2008
Contactors — Full Voltage, Non-reversing and Reversing
Product Description
Contents Description
34
Product Family Overview Product Description . . . . . . . Standards and Certifications . . . . . . . . . . . Publications . . . . . . . . . . . . . Catalog Number Selection . . . . . . . . . . . . . . Contactors — Non-reversing and Reversing Product Description . . . . . . . Application Description. . . . Features . . . . . . . . . . . . . . . . Product Selection . . . . . . . . Technical Data and Specifications . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . Auxiliary Contacts . . . . . . . . Renewal Parts . . . . . . . . . . . . . . Wiring Diagrams. . . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . .
Page 34-218 34-218 34-218 34-219
34-220 34-220 34-220 34-221 34-230 34-234 34-236 34-238 34-239 34-240
The Cutler-Hammer® Intelligent Technologies (IT.) Electro-Mechanical Contactor from Eaton’s electrical business consists of an IT. ElectroMechanical Contact Block and IT. Electro-Mechanical Coil Controller as a Full Voltage Non-reversing (FVNR) or Full Voltage Reversing (FVR) device. B-Frame (45 mm) to E-Frame (105 mm) Contact Blocks combined with Coil Controllers (factory or field assembled) are stand-alone Contactors. Only the A-Frame (27 mm) and F-Frame (140 mm) Contactors have internal factory assembled coil controllers. Also available are the IT. Manual and Combination Motor Controllers which combine a Manual Motor Protector, Wiring Connector Link and IT. Contactor. See Tab 38 for more information.
Application Description When selecting an IEC Contactor, the user must consider the specific load, utilization category and required electrical life. Actual application life may vary depending on environmental conditions and duty cycle.
Features ■ ■ ■
IEC Full Voltage Non-reversing Contactor, C-Frame Cat. No. E111C50X3N
■ ■ ■ ■
115V AC – 600V AC, 1/4 – 350 hp/ 3/4 – 250 kW, 50/60 Hz 24V DC Coil Control — safe, reliable global standard Most compact DC operated contactors available — e.g., A-Frame 27 mm wide, 7-1/2 hp @ 12A, 460V Frame sizes (mm): 27, 45, 54, 76, 105, 140 No laminations, shading coils or magnet noise -40 to 149°F (-40 to 65°C) operating temperature No seal in auxiliary contacts required — control wiring is not needed between the contactor and overload relay
■
■
■ ■ ■ ■ ■
■
■
■ ■ ■
■ ■ ■
Unique Pulse Width Modulated (PWM) coil controller minimizes energy and coil power consumption Conformal coated PWM board (coil controller) for environmental toughness Microprocessor-based control 95% humidity non-condensing (99% consult factory) Easily accessible mounting feet for panel mounting High immunity to ESD, harmonics — minimal Total Harmonic Distortion Front and side mounted Auxiliary Contacts: 1NO, 1NC, 2NO, 2NC, 1NO/1NC and logic level Built-in logic to provide either 2- or 3-wire control, eliminating the need to provide and wire auxiliary contacts to seal in and interlock the contactor coils Easy field assembly of control wiring — plug and unplug lockable control connector DIN rail mounting, 6 – 100A (A – D Frames) Common accessories Long-life silver nickel (A – B Frames) and silver tin oxide (C – F Frames) contacts provide excellent conductivity and superior resistance to welding and arc erosion Environmentally friendly materials IP20 Finger Protection Low wattage coils and minimal heat dissipation
Reversing Contactors ■
Includes Reversing Power Wiring and bus bars ■ Mounting plates for B-Frame (45 mm) to E-Frame (105 mm) ■ Exclusive internal electronic interlock for reversing ■ Unique coil controller energizes both forward and reverse contactors — one control point for wiring
IEC Full Voltage Reversing Contactor, D-Frame Cat. No. E511D10X3N
For more information visit: www.eaton.com
CA08102001E
IEC Contactors & Starters IT. Electro-Mechanical
34-221
March 2008
Contactors — Full Voltage, Non-reversing and Reversing
Product Selection When Ordering Select required contactor by amp rating, frame size, kW/hp, voltage and nonreversing or reversing.
Non-reversing Contactors
34
Note: ■An E111 (45 – 105 mm) consists of an E04N
(Contact Block) and an E02N (FVNR Coil Controller), factory assembled. â– An E111 (27 and 140 mm) has an internal coil controller, factory assembled.
IEC A-Frame FVNR Contactor Cat. No. E111A12X3N
IEC B-Frame FVNR Contactor Cat. No. E111B32X3N
Table 34-267. 3-Pole DC-Operated Full Voltage Non-reversing Contactors í˘“ (A – F Frames) Max. AC-3 Amp. Rating 480V AC (le)
IEC 60947-4-1 AC-1 Thermal Current 480V AC and (Ith)
Frame Maximum kW Rating @ Ue (V) 50/60 Hz Size 3-Phase í˘”
Maximum UL Horsepower (hp) 50/60 Hz 1-Phase
220V/ 380V 400V/ 440V/ 500V 550V/ 115V/ 220V/ 200V/ 240V 415V 460V 575V 120V 230V 208V
6 9 12
12 16 20
A A A
1.1 2.2 3
2.2 4 5.5
2.2 4 5.5
3 4 6.5
3 4 6.5
3 4 6.5
18 25 32
25 40 50
B B B
4 5.5 9
7.5 12.5 15
9 12.5 15
9 13 18.5
10 15 18.5
11 15 18.5
1 2 2
40 50
63 85
C C
11 12.5
18.5 22
22 25
22 30
22 30
25 33
3 3
65 85 100
100 115 130
D D D
18.5 25 25
30 45 51
33 45 55
40 51 59
40 51 59
45 55 63
125 160 200
200 225 250
E E E
33 45 59
63 80 100
63 80 110
80 100 110
80 100 110
250 315 420
300 375 450
F F F
75 90 110
132 160 220
140 160 220
160 200 257
160 200 257
í˘“ í˘”
1/4 1/3 1/2
3-Pole Open Type
3-Phase
1/2 1 2
1 2 3
3 3 5
5 5 7-1/2
230V/ 240V
380V/ 460V/ 415V 480V
Catalog Number
1-1/2 2 3
3 3 5
5 7-1/2 10
10 10 15
10 15 20
10 15 20
E111B18X3N E111B25X3N E111B32X3N
10 15
10 15
20 25
25 30
25 30
E111C40X3N E111C50X3N
5 10 7-1/2 15 10 20
20 25 30
20 30 30
40 50 50
50 60 75
50 60 75
E111D65X3N E111D85X3N E111D10X3N
80 100 132
10 15 —
25 30 40
40 50 60
40 60 75
60 75 100
100 125 150
100 125 150
E111E12X3N E111E16X3N E111E20X3N
160 200 257
— — —
50 — —
75 100 150
100 125 150
150 150 200
200 250 350
200 250 350
E111F25X3N E111F31X3N E111F42X3N
7-1/2 10
3 5 7-1/2
575V/ 600V
Price U.S. $
3 E111A06X3N 5 E111A09X3N 7-1/2 E111A12X3N
24V DC coil voltage. Frame Size A = 27 mm B = 45 mm C = 54 mm D = 76 mm E = 105 mm F = 140 mm
Note: ■If required, accessories are available starting on Page 34-234. ■Integral solid-state auxiliary hold-in circuit. ■3 main contacts. ■See Table 34-276 for 24V DC power supply requirements. ■Control inputs (P, F) are rated 24V DC (3 – 5 mA).
Accessories . . . . . . . . . . Technical Data . . . . . . . . Dimensions . . . . . . . . . . . Discount Symbol . . . . . . CA08102001E
For more information visit: www.eaton.com
Pages 34-234 – 34-237 Pages 34-230 – 34-233 Pages 34-240 – 34-242 1CD7
IEC Contactors & Starters IT. Electro-Mechanical
34-222
March 2008
Contactors — Full Voltage, Non-reversing and Reversing
Reversing Contactors Note: ■An E511 (45 – 105 mm) consists of two E04N
34
(Contact Blocks), an E03N (FVR Coil Controller), Mechanical Interlock, Fanning Strips and Mounting Plate, factory assembled. â– An E511F (140 mm) consists of two E111F (Contactors), Mechanical Interlock, Crossover Bus Bars and Wiring Harness, factory assembled. â– An E511A (27 mm) Contactor is factory assembled only.
IEC B-Frame FVR Contactor Cat. No. E511B32X3N
Table 34-268. 3-Pole DC-Operated Full Voltage Reversing Contactors í¢“ (A – F Frames) Max. AC-3 Amp. Rating 480V AC (le)
Frame Maximum kW Rating @ Ue (V) 50/60 Hz IEC 60947-4-1 Size 3-Phase í¢” AC-1 220V/ 380V 400V/ 440V/ 500V 550V/ Thermal 240V 415V 460V 575V Current 480V AC and (Ith)
Maximum UL Horsepower (hp) 50/60 Hz 1-Phase
115V/ 220V/ 200V/ 120V 230V 208V
6 9 12
12 16 20
A A A
1.1 2.2 3
2.2 4 5.5
2.2 4 5.5
3 4 6.5
3 4 6.5
3 4 6.5
18 25 32
25 40 50
B B B
4 5.5 9
7.5 12.5 15
9 12.5 15
9 13 18.5
10 15 18.5
11 15 18.5
1 2 2
40 50
63 85
C C
11 12.5
18.5 22
22 25
22 30
22 30
25 33
3 3
65 85 100
100 115 130
D D D
18.5 25 25
30 45 51
33 45 55
40 51 59
40 51 59
45 55 63
125 160 200
200 225 250
E E E
33 45 59
63 80 100
63 80 110
80 100 110
80 100 110
250 315 420
300 375 450
F F F
75 90 110
132 160 220
140 160 220
160 200 257
160 200 257
í¢“ í¢”
1/4 1/3 1/2
3-Pole Open Type
3-Phase
1/2 1 2
1 2 3
3 3 5
5 5 7-1/2
230V/ 240V
380V/ 415V
460V/ 480V
Catalog Number
Price U.S. $
1-1/2 2 3
3 3 5
5 7-1/2 10
10 10 15
10 15 20
10 15 20
E511B18X3N E511B25X3N E511B32X3N
10 15
10 15
20 25
25 30
25 30
E511C40X3N E511C50X3N
5 10 7-1/2 15 10 20
20 25 30
20 30 30
40 50 50
50 60 75
50 60 75
E511D65X3N E511D85X3N E511D10X3N
80 100 132
10 15 —
25 30 40
40 50 60
40 60 75
60 75 100
100 125 150
100 125 150
E511E12X3N E511E16X3N E511E20X3N
160 200 257
— — —
50 — —
75 100 150
100 125 150
150 150 200
200 250 350
200 250 350
E511F25X3N E511F31X3N E511F42X3N
7-1/2 10
3 5 7-1/2
575V/ 600V
3 E511A06X3N 5 E511A09X3N 7-1/2 E511A12X3N
24V DC coil voltage. Frame Size A = 27 mm B = 45 mm C = 54 mm D = 76 mm E = 105 mm F = 140 mm
Note: ■If required, accessories are available starting on Page 34-234. ■Integral solid-state auxiliary hold-in circuit. ■3 main contacts. ■See Table 34-276 for 24V DC power supply requirements. ■Control inputs (P, F, R) are rated 24V DC (3 – 5 mA).
Accessories . . . . . . . . . . . Technical Data . . . . . . . . Dimensions . . . . . . . . . . . Discount Symbol . . . . . . . For more information visit: www.eaton.com
Pages 34-234 – 34-237 Pages 34-230 – 34-233 Pages 34-240 – 34-242 1CD7 CA08102001E