™
®
ercury Racing’s latest technology, SystemView Race Edition, is like nothing you’ve ever seen before. It features custom interactive software designed for performance boaters. Engine and vessel operating parameters are sent from Mercury’s exclusive PCM 03 microprocessor and displayed real-time on the SmartCraft® SC5000 SystemView hardware. SystemView - Race Edition is also capable of displaying vital information for up to four engines at one time! Over 20 screens are available to display more than 30 engine/boat functions. Many of the screens can be configured by the boat owner to create custom displays for virtually any combination of real-time performance data. Display fonts were purposely designed to be as large as possible for an accurate quick read of vital engine/boat functions in the fast-paced performance boat environment. Unique to SystemView - Race Edition is the patent-pending inches-per-revolution measurement. This information enables the boater to trim outboards/drives and trim tabs to a point in which maximum propeller/hull efficiency is achieved. It also allows for a direct comparison of different drive and propeller combinations that does not rely on the often hard-to-determine pitch of the propeller and eliminates having to
update the display every time a propeller or gear ratio is changed. From this data, the operator can easily calculate propeller slip as well as finding out other propeller attributes that can quickly be used to determine what propeller is really needed for a particular race-day, or every-day, by helping to get the best “all-around” setup. Another screen unique to SystemView - Race Edition is the drive/tab trim position screen. Trim tab and propeller icons display real-time trim positions for each on a scale of 0-10. The home page, similar to a website, features five directories (Favorites, SystemView Race Edition, Slide Show, Quad: Engine Data Tanks and Trip Log) which are customizable as well.
Quad: RPM Sync
Main Menu
Screens are displayed on the Mercury SmartCraft SC5000 System View Monitor
Trip Log provides the boater with vital information such as peak speed and fuel mileage. Anglers will appreciate the interactive troll control, also accessible from the home page, which enables the operator to set engine rpm at a fixed point for a constant, hands free trolling speed. The tank directory enables the boater to get a quick read of fuel tank levels. A single main menu allows quick access to data such as engine run history, engine and vessel fault data, as well as, all calibrations and configurations. The system is easy to configure. Initial set-up is where the operator inputs vessel information including number of engines, engine rotation and engine location in the boat.
Quad: Peak Speed
Trip History Log
Dual: Range
Live Data Display
Dual: Fuel PSI, Boost
Engine Run History
The operator can then set the display configuration independent of the number of engines. For example, for a dual engine application, the helm could be configured with one display dedicated for each engine, or with both engines on one screen. In either case, SystemView - Race Edition still displays complete vessel system information, overall vessel fuel consumption and performance data, as an example, even though the screen may be configured primarily as a single engine display. SystemView - Race Edition comes with a detailed owners manual developed by Mercury Racing’s Service Department which walks through the initial set-up and explains each of the screens in detail.
Triple: RPM, Trim
Faults
Single: RPM, Trim
User Limits
Quad: Full Screen Trim
Triple: Troll Control
Following is the list of engine/vessel data recorded and or displayed via SystemView - Race Edition: Engine Data: • • • •
Engine RPM • Engine Water Pressure • Engine Coolant Temperature Engine Oil Pressure • Engine Oil Temperature • Engine Fuel Flow Battery Voltage • Engine Boost Pressure • Engine Fuel Pressure Fuel Pressure Delta (regulated fuel pressure)
Vessel Data: • Boat Speed (from Pitot, Paddle Wheel, or GPS) • Water Depth • Fuel Tank Levels • Air Temperature • Sea Temperature • Port, Starboard and Center Trim Tab Position • Outboard/Drive Trim Position • Inches Traveled Per Engine Revolution • Remote Oil Tank Levels • Boat Fresh Water Tank Levels • Boat Waste Water Tank Levels • Total Vessel Fuel Flow Range Fuel Used • Average Fuel Mileage (0.01 resolution) • Instant Fuel Mileage (0.01 resolution) • Clock/Time • Peak Speed • GPS • Bearing to Waypoint • Speed Over Ground • Course Over Ground • Distance to SystemView Race Waypoint • Time to Edition supports digital input directly from select models Waypoint (Calculated of Mercury Racing K-Plane trim tabs. from GPS data) • Fuel to This enables digital K-Plane trim positions to Waypoint (Calculated be displayed on boats powered by any Mercury from GPS data) SmartCraft equipped outboard or sterndrive.
Mercury’s new state-of-the-art X-Site test facility, located on Watson Bayou in Panama City, Florida features multiple in-water slips, as well as an office, laboratory, and boat rigging building. All new Mercury Racing products, like the new SystemView - Race Edition, are tested and validated at the X-Site test facility. Products must prove their performance and reliability before they can wear the Mercury Racing name. A full one-year limited Mercury warranty is standard on SystemView - Race Edition. Mercury Racing is passionate about building the highest quality performance products on the planet!
®
X-Site Test Facility
Mercury Racing, along with its parent company, Mercury Marine, is the first U.S. marine engine manufacturer to be ISO 9001/2000 certified.
®
Remember: Life Vests Float. You Don’t. ®
©2005 Mercury Marine • Part #90-896495005 • Printed in U.S.A.