Nissan Marine 2012 Full Brochure

2012 Where Technology Meets Dependability

Where Technology Meets Dependability

2011

SUPERIOR TECHNOLOGY

® C.P. SENSOR W.T.SENSOR CYLINDER

M.A.T SENSOR

W.T.SENSOR AIR COMPRESSOR

115 Output current (12V)

M.A.P SENSOR ECU

High output alternator

T.P SENSOR

Equipped with a high output alternator that produces 37amps of power even at 1,000rpm and a whopping 40amps at wide-open throttle.

(115hp only)

Individual sensors 6 individual sensors provide constant vital engine information to the ECU for maximum efficiency.

(115hp only)

THE TLDI PROCESS The 32-bit ECU (Engine Control Unit) gives precise fuel injection instructions in accordance to the operating conditions detected by its multiple sensors, maximizing the engine's performance while providing exceptional fuel economy. *TLDI meets all current regulations stipulated by the EPA (Environmental Protection Agency) in 2006.

TLDI® (Two-stroke, Low pressure, Direct Injection)

Idle noise reduction system

Direct fuel injection into cylinders

Engine control unit (ECU)

The exhaust gases and the sound are routed through the labyrinth exhaust.

This process reduces the noise level to a minimum when exiting above the water line through the idle port.

The design of the cylinder head and piston dome, plus the finely atomized fuel mist created by the fuel injector will achieve ideal combustion.

The 32 bit engine control unit controls the fuel injection and ignition timing for TLDI® outboards.

Pistons dedicated to TLDI® outboards

Freshwater flushing port

Teflon® coated pistons (Equipped on NSD 75/90) with a concave shape to the head were specifically designed for TLDI® and significantly increase the fuel combustion efficiency.

Air compressor One of TLDI®’s essential engine components that is the driving force in achieving stabilized fuel injection.

Three step trolling speed control

Multifunctional tachometer The tachometer informs the operator of potential problems through the meter indicator and warning lamp.

1

Comes standard with a convenient built-in freshwater flush system on the side of the engine that simplifies routine engine flushing.

The idling speed can be set to any of the three rpm ranges, 700, 800 or 900, by adjusting it on your key switch. This feature allows you to select the ideal trolling speed for maneuvering during a variety of current and wind conditions.

New Paint Coating Process

800rpm

900rpm

700rpm

2-part hardened Acrylic resin coating specially formulated for marine environment helps protect the engine from UV or salt water damage.

Acrylic resin high solid paint coat Epoxy high solid primer undercoat Chemical conversion treatment Marine Grade Alminum Alloy

2

SUPERIOR TECHNOLOGY

® C.P. SENSOR W.T.SENSOR CYLINDER

M.A.T SENSOR

W.T.SENSOR AIR COMPRESSOR

115 Output current (12V)

M.A.P SENSOR ECU

High output alternator

T.P SENSOR

Equipped with a high output alternator that produces 37amps of power even at 1,000rpm and a whopping 40amps at wide-open throttle.

(115hp only)

Individual sensors 6 individual sensors provide constant vital engine information to the ECU for maximum efficiency.

(115hp only)

THE TLDI PROCESS The 32-bit ECU (Engine Control Unit) gives precise fuel injection instructions in accordance to the operating conditions detected by its multiple sensors, maximizing the engine's performance while providing exceptional fuel economy. *TLDI meets all current regulations stipulated by the EPA (Environmental Protection Agency) in 2006.

TLDI® (Two-stroke, Low pressure, Direct Injection)

Idle noise reduction system

Direct fuel injection into cylinders

Engine control unit (ECU)

The exhaust gases and the sound are routed through the labyrinth exhaust.

This process reduces the noise level to a minimum when exiting above the water line through the idle port.

The design of the cylinder head and piston dome, plus the finely atomized fuel mist created by the fuel injector will achieve ideal combustion.

The 32 bit engine control unit controls the fuel injection and ignition timing for TLDI® outboards.

Pistons dedicated to TLDI® outboards

Freshwater flushing port

Teflon® coated pistons (Equipped on NSD 75/90) with a concave shape to the head were specifically designed for TLDI® and significantly increase the fuel combustion efficiency.

Air compressor One of TLDI®’s essential engine components that is the driving force in achieving stabilized fuel injection.

Three step trolling speed control

Multifunctional tachometer The tachometer informs the operator of potential problems through the meter indicator and warning lamp.

1

Comes standard with a convenient built-in freshwater flush system on the side of the engine that simplifies routine engine flushing.

The idling speed can be set to any of the three rpm ranges, 700, 800 or 900, by adjusting it on your key switch. This feature allows you to select the ideal trolling speed for maneuvering during a variety of current and wind conditions.

New Paint Coating Process

800rpm

900rpm

700rpm

2-part hardened Acrylic resin coating specially formulated for marine environment helps protect the engine from UV or salt water damage.

Acrylic resin high solid paint coat Epoxy high solid primer undercoat Chemical conversion treatment Marine Grade Alminum Alloy

2

Built tough. Built to last. Even through the toughest conditions, your Nissan Marine outboard will perform to the max! So hold on tight and enjoy the ride, because life is an adventure when it's backed by the ultimate power.

®

D u ra b i li ty tha t c a n ' t b e b ea t Nissan Marine TLDI® 90/75 benefits:

� New high speed gear ratio (NSD90) � Air assisted direct fuel injection system provides excellent fuel economy � Quiet operation � Excellent horsepower-to-weight ratio � Lightweight and compact � Ultra low emission, EPA approved � Nissan Marine unique 3+1 TLDI® limited warranty, one of the best Direct Injection warranties in the industry*

High performance and easy operation:

These high technology outboards provide a significant decrease in fuel and oil consumption, giving you a cleaner, quieter boat ride at a lower operating cost.

� Inductive ignition system for reliable starting � Outstanding acceleration � Electronic oil pump for more precise oil regulation throughout the rpm range � Oil reservoir opening located on the top of the motor for quicker and easier refill onboard � Multi-point oil injection system to more completely lubricate vital engine components � Power Trim & Tilt

Fundamentals for user convenience and reliability:

� Through-the-prop exhaust for a quieter ride � Thermostatically controlled cooling system for consistent engine temperature � Stainless steel water pump housing for outstanding durability � High grade marine aluminum alloy that provides the ultimate protection against corrosion � Zinc coating on internal water passages for superior corrosion resistance � User adjustable idle and trolling speeds � Pre-rigging kits including tachometer, aluminum propeller and remote control box

Warning and protection:

3+1 Year limited warranty

5

NSD

90/75

� Low oil level warning (visual and audible) � Overheat warning (visual and audible) � Battery voltage warning (visual only) � Start-in-gear protection for safer engine starting � Safety lanyard (an essential protection feature standard on all Nissan Marine outboards) � Over-rev. limiter � High-altitude compensation kits available (Option) * Recreational usage

6

Built tough. Built to last. Even through the toughest conditions, your Nissan Marine outboard will perform to the max! So hold on tight and enjoy the ride, because life is an adventure when it's backed by the ultimate power.

®

D u ra b i li ty tha t c a n ' t b e b ea t Nissan Marine TLDI® 90/75 benefits:

� New high speed gear ratio (NSD90) � Air assisted direct fuel injection system provides excellent fuel economy � Quiet operation � Excellent horsepower-to-weight ratio � Lightweight and compact � Ultra low emission, EPA approved � Nissan Marine unique 3+1 TLDI® limited warranty, one of the best Direct Injection warranties in the industry*

High performance and easy operation:

These high technology outboards provide a significant decrease in fuel and oil consumption, giving you a cleaner, quieter boat ride at a lower operating cost.

� Inductive ignition system for reliable starting � Outstanding acceleration � Electronic oil pump for more precise oil regulation throughout the rpm range � Oil reservoir opening located on the top of the motor for quicker and easier refill onboard � Multi-point oil injection system to more completely lubricate vital engine components � Power Trim & Tilt

Fundamentals for user convenience and reliability:

� Through-the-prop exhaust for a quieter ride � Thermostatically controlled cooling system for consistent engine temperature � Stainless steel water pump housing for outstanding durability � High grade marine aluminum alloy that provides the ultimate protection against corrosion � Zinc coating on internal water passages for superior corrosion resistance � User adjustable idle and trolling speeds � Pre-rigging kits including tachometer, aluminum propeller and remote control box

Warning and protection:

3+1 Year limited warranty

5

NSD

90/75

� Low oil level warning (visual and audible) � Overheat warning (visual and audible) � Battery voltage warning (visual only) � Start-in-gear protection for safer engine starting � Safety lanyard (an essential protection feature standard on all Nissan Marine outboards) � Over-rev. limiter � High-altitude compensation kits available (Option) * Recreational usage

6

Our 50/40 hp range models provide boaters the dependability that makes Nissan Marine one of the top brands in the industry.

Whether you'll be out for a full day or just a few hours, Nissan Marine will be right there with you.

®

Dependability that outlasts the competition Nissan Marine TLDI® 50/40 benefits:

� Air assisted direct fuel injection system provides excellent fuel economy � Quiet operation � Excellent horsepower-to-weight ratio � Lightweight and compact � Ultra low emission, EPA and CARB approved � Nissan Marine's unique 3+1 TLDI® limited warranty, one of the best Direct Injection warranties in the industry*

High performance and easy operation:

� Inductive ignition system for reliable starting � Outstanding acceleration � Oil reservoir opening located on the top of the motor for quicker and easier refill onboard � Multi-point oil injection system to more completely lubricate vital engine components � Power Trim & Tilt

Fundamentals for user convenience and reliability:

� Through-the-prop exhaust for a quieter ride � Thermostatically controlled cooling system for consistent engine temperature � Stainless steel water pump housing for outstanding durability � High grade marine aluminum alloy that provides the ultimate protection against corrosion � Zinc coating on internal water passages for superior corrosion resistance � User adjustable idle and trolling speeds � Tachometer and Trim Gauge** � Aluminum propeller � Remote control box**

Warning and protection:

3+1 Year limited warranty

7

NSD

50/40

� Low oil level warning (visual and audible) � Overheat warning (visual and audible) � Battery voltage warning (visual only) � Start-in-gear protection for safer engine starting � Safety lanyard (an essential protection feature standard on all Nissan Marine outboards) � Over-rev. limiter � High-altitude compensation kits available (Option) *Recreational usage

**Remote control models

8

Our 50/40 hp range models provide boaters the dependability that makes Nissan Marine one of the top brands in the industry.

Whether you'll be out for a full day or just a few hours, Nissan Marine will be right there with you.

®

Dependability that outlasts the competition Nissan Marine TLDI® 50/40 benefits:

� Air assisted direct fuel injection system provides excellent fuel economy � Quiet operation � Excellent horsepower-to-weight ratio � Lightweight and compact � Ultra low emission, EPA and CARB approved � Nissan Marine's unique 3+1 TLDI® limited warranty, one of the best Direct Injection warranties in the industry*

High performance and easy operation:

� Inductive ignition system for reliable starting � Outstanding acceleration � Oil reservoir opening located on the top of the motor for quicker and easier refill onboard � Multi-point oil injection system to more completely lubricate vital engine components � Power Trim & Tilt

Fundamentals for user convenience and reliability:

� Through-the-prop exhaust for a quieter ride � Thermostatically controlled cooling system for consistent engine temperature � Stainless steel water pump housing for outstanding durability � High grade marine aluminum alloy that provides the ultimate protection against corrosion � Zinc coating on internal water passages for superior corrosion resistance � User adjustable idle and trolling speeds � Tachometer and Trim Gauge** � Aluminum propeller � Remote control box**

Warning and protection:

3+1 Year limited warranty

7

NSD

50/40

� Low oil level warning (visual and audible) � Overheat warning (visual and audible) � Battery voltage warning (visual only) � Start-in-gear protection for safer engine starting � Safety lanyard (an essential protection feature standard on all Nissan Marine outboards) � Over-rev. limiter � High-altitude compensation kits available (Option) *Recreational usage

**Remote control models

8

UNPARALLELED TECHNOLOGY

All Four-stroke models meet all current regulations stipulated by the EPA (Environmental Protection Agency) in 2006.

An easy view sight-gauge

NSF Wide anti-cavitation plate with trim tab

Air silencer system

NSF

30/25

15°

The wide anti-cavitation plate effectively restrains the propeller from cavitating. The large trim tab helps to achieve effortless steering at high speeds while also providing corrosion protection.

Our air-intake system has a large volume air silencer to ensure engine starting and to suppress air-intake noise during engine operation.

6/5/4/3.5/2.5

It’s easy to check oil levels with the oil level indicator located on the side of the engine.

(3.5/2.5)

Offset engine This patented powerhead design is tilted 15 degrees to the right inside the lower motor cover to create a compact top cowling design and also help with portability.

(3.5/2.5)

Electronic Fuel Injection

360° full pivot steering

360°

The outboard can be turned to any direction, up to 360 degrees, for simple steering that is needed for small boats.

(3.5/2.5)

Four point dampening system Tubular air-intake

Front shift

The uniquely designed tubular structure of the air intake allows necessary airflow while preventing water from entering into the motor cover.

Engine control unit

The twist type throttle control provides quick steering as well as one-handed operation capability.

The 16 bit ECU precisely controls the fuel injection and ignition timing.

st

Exhau

Simple steering friction lever

Tuned intake manifold The tuned intake manifold provides increased low & mid speed torque and quieter operation.

9

The lever at the front allows the steering friction adjustment for both steady running at high speed and easier steering at trolling.

(20/15) (tiller model only)

Battery-less electronic fuel injection

Air

The industry's first battery-less electronically controlled fuel injection that provides quick throttle response, excellent fuel economy, and very smooth rides on the water.

NSF

The specifically designed motor dampening system reduces vibration at all rpm ranges.

(3.5/2.5)

Throttle grip

The shift lever is located on the front of the motor for easier operation.

20/15/9.8/8

Integral tank With a built-in fuel tank conveniently located on top, 3.5 and 2.5 becomes ready for cruising quickly and without taking up extra space in the boat. An external fuel fitting also comes standard with the 4hp model to allow the motor to hook up to a remote fuel tank as well.

Propeller hub exhaust Through-the-prop exhaust is used to achieve nice, quiet running conditions.

(6/5/4)

10

UNPARALLELED TECHNOLOGY

All Four-stroke models meet all current regulations stipulated by the EPA (Environmental Protection Agency) in 2006.

An easy view sight-gauge

NSF Wide anti-cavitation plate with trim tab

Air silencer system

NSF

30/25

15°

The wide anti-cavitation plate effectively restrains the propeller from cavitating. The large trim tab helps to achieve effortless steering at high speeds while also providing corrosion protection.

Our air-intake system has a large volume air silencer to ensure engine starting and to suppress air-intake noise during engine operation.

6/5/4/3.5/2.5

It’s easy to check oil levels with the oil level indicator located on the side of the engine.

(3.5/2.5)

Offset engine This patented powerhead design is tilted 15 degrees to the right inside the lower motor cover to create a compact top cowling design and also help with portability.

(3.5/2.5)

Electronic Fuel Injection

360° full pivot steering

360°

The outboard can be turned to any direction, up to 360 degrees, for simple steering that is needed for small boats.

(3.5/2.5)

Four point dampening system Tubular air-intake

Front shift

The uniquely designed tubular structure of the air intake allows necessary airflow while preventing water from entering into the motor cover.

Engine control unit

The twist type throttle control provides quick steering as well as one-handed operation capability.

The 16 bit ECU precisely controls the fuel injection and ignition timing.

st

Exhau

Simple steering friction lever

Tuned intake manifold The tuned intake manifold provides increased low & mid speed torque and quieter operation.

9

The lever at the front allows the steering friction adjustment for both steady running at high speed and easier steering at trolling.

(20/15) (tiller model only)

Battery-less electronic fuel injection

Air

The industry's first battery-less electronically controlled fuel injection that provides quick throttle response, excellent fuel economy, and very smooth rides on the water.

NSF

The specifically designed motor dampening system reduces vibration at all rpm ranges.

(3.5/2.5)

Throttle grip

The shift lever is located on the front of the motor for easier operation.

20/15/9.8/8

Integral tank With a built-in fuel tank conveniently located on top, 3.5 and 2.5 becomes ready for cruising quickly and without taking up extra space in the boat. An external fuel fitting also comes standard with the 4hp model to allow the motor to hook up to a remote fuel tank as well.

Propeller hub exhaust Through-the-prop exhaust is used to achieve nice, quiet running conditions.

(6/5/4)

10

The Electronic Fuel Injection outboards offer the best technology while maintaining simplicity in its operation. That's why Nissan Marine appeals to all types of boaters.

Electronic Fuel Injection

A dva n c ed te c h n o l o g y i n a simple o pe ratio n Nissan Marine 4-stroke 30/25 benefits: � Designed with proven technology � Advanced cross-flow induction for smooth operation � Canister style oil filter for easy replacement � Larger capacity oil reservoir for optimum lubrication � Tuned intake system for crisp takeoffs � Ultra low emissions, EPA and CARB approved � Nissan Marine’s 3-year limited warranty*** High performance and easy operation: � Large alternator and rectifier for superior battery charging � Adjustable steering friction* and trim tab for reducing steering effort � Trim setting, 6 positions* � Power trim & tilt* � Gas assisted tilt (25)* � Remote control** � Front mounted shift lever for easier operation � Electronic Fuel Injection Fundamentals for user convenience and reliability: � Through-the-prop exhaust for a quiet ride � Thermostatically controlled cooling system for consistent engine temperature � Stainless steel water pump housing for outstanding durability � High grade marine aluminum alloy that provides the ultimate protection against corrosion � Zinc coating on internal water passages for superior corrosion resistance � Decompression device for ease of manual starts � Plastic 6.6 US gal. (25 liter) fuel tank. � Aluminum propeller

3 Year limited warranty

11

NSF

30/25

Warning and protection: � Low oil pressure warning (visual and audible) � Overheat warning (audible) � Safety lanyard (an essential protection feature standard on all Nissan outboards) � Start-in-gear protection for safer engine starting � Over-rev. limiter *Certain models **Remote control models ***Recreational usage

12

The Electronic Fuel Injection outboards offer the best technology while maintaining simplicity in its operation. That's why Nissan Marine appeals to all types of boaters.

Electronic Fuel Injection

A dva n c ed te c h n o l o g y i n a simple o pe ratio n Nissan Marine 4-stroke 30/25 benefits: � Designed with proven technology � Advanced cross-flow induction for smooth operation � Canister style oil filter for easy replacement � Larger capacity oil reservoir for optimum lubrication � Tuned intake system for crisp takeoffs � Ultra low emissions, EPA and CARB approved � Nissan Marine’s 3-year limited warranty*** High performance and easy operation: � Large alternator and rectifier for superior battery charging � Adjustable steering friction* and trim tab for reducing steering effort � Trim setting, 6 positions* � Power trim & tilt* � Gas assisted tilt (25)* � Remote control** � Front mounted shift lever for easier operation � Electronic Fuel Injection Fundamentals for user convenience and reliability: � Through-the-prop exhaust for a quiet ride � Thermostatically controlled cooling system for consistent engine temperature � Stainless steel water pump housing for outstanding durability � High grade marine aluminum alloy that provides the ultimate protection against corrosion � Zinc coating on internal water passages for superior corrosion resistance � Decompression device for ease of manual starts � Plastic 6.6 US gal. (25 liter) fuel tank. � Aluminum propeller

3 Year limited warranty

11

NSF

30/25

Warning and protection: � Low oil pressure warning (visual and audible) � Overheat warning (audible) � Safety lanyard (an essential protection feature standard on all Nissan outboards) � Start-in-gear protection for safer engine starting � Over-rev. limiter *Certain models **Remote control models ***Recreational usage

12

Try our 20/15/9.8hp with power tilt for better operation! This new 4-stroke is perfect for inflatables, small fishing boats and pontoon boats.

NSF

20/15/9.8

Like our other models, this model is also backed by a 3-year warranty and exceeds all EPA and CARB Light and compact power tilt and transom bracket

emission standards.

A power fu l ki c k i n a sma ll pa c ka ge Nissan Marine 4-stroke benefits:

� Designed with proven technology � Advanced cross-flow induction for smooth operation � Canister style oil filter for easy replacement (20/15) � Larger capacity oil reservoir for optimum lubrication � Tuned intake system for crisp takeoffs � Ultra low emissions, EPA and CARB approved � Nissan Marine’s 3-year limited warranty***

High performance and easy operation:

Excellent horsepower-to-weight ratio, top-notch performance plus, a 3-year limited warranty make these outboards a clear choice.

Because at Nissan Marine, we believe that good things do come in small packages.

NSF 3 Year limited warranty

13

20/15/9.8/8

� Digital CD ignition system for quicker starts � Large alternator and rectifier for superior battery charging � Adjustable steering friction* and trim tab for reducing steering effort � Trim setting, 6 positions* � Remote control** � Front mounted shift lever for easier operation

Fundamentals for user convenience and reliability: � Through-the-prop exhaust for a quiet ride � Thermostatically controlled cooling system for consistent engine temperature � Stainless steel water pump housing for outstanding durability � High grade marine aluminum alloy that provides the ultimate protection against corrosion � Zinc coating on internal water passages for superior corrosion resistance � 3.1 US gal. (12 liter) plastic fuel tank with fuel line � Aluminum propeller Warning and protection: � Low oil pressure warning (visual) � Safety lanyard (an essential protection feature standard on all Nissan outboards) � Start-in-gear protection for safer engine starting � Over-rev. limiter *Certain models **Remote control models ***Recreational usage

14

Try our 20/15/9.8hp with power tilt for better operation! This new 4-stroke is perfect for inflatables, small fishing boats and pontoon boats.

NSF

20/15/9.8

Like our other models, this model is also backed by a 3-year warranty and exceeds all EPA and CARB Light and compact power tilt and transom bracket

emission standards.

A power fu l ki c k i n a sma ll pa c ka ge Nissan Marine 4-stroke benefits:

� Designed with proven technology � Advanced cross-flow induction for smooth operation � Canister style oil filter for easy replacement (20/15) � Larger capacity oil reservoir for optimum lubrication � Tuned intake system for crisp takeoffs � Ultra low emissions, EPA and CARB approved � Nissan Marine’s 3-year limited warranty***

High performance and easy operation:

Excellent horsepower-to-weight ratio, top-notch performance plus, a 3-year limited warranty make these outboards a clear choice.

Because at Nissan Marine, we believe that good things do come in small packages.

NSF 3 Year limited warranty

13

20/15/9.8/8

� Digital CD ignition system for quicker starts � Large alternator and rectifier for superior battery charging � Adjustable steering friction* and trim tab for reducing steering effort � Trim setting, 6 positions* � Remote control** � Front mounted shift lever for easier operation

Fundamentals for user convenience and reliability: � Through-the-prop exhaust for a quiet ride � Thermostatically controlled cooling system for consistent engine temperature � Stainless steel water pump housing for outstanding durability � High grade marine aluminum alloy that provides the ultimate protection against corrosion � Zinc coating on internal water passages for superior corrosion resistance � 3.1 US gal. (12 liter) plastic fuel tank with fuel line � Aluminum propeller Warning and protection: � Low oil pressure warning (visual) � Safety lanyard (an essential protection feature standard on all Nissan outboards) � Start-in-gear protection for safer engine starting � Over-rev. limiter *Certain models **Remote control models ***Recreational usage

14

A perfect choice for sailboats !

Nissan Marine's uniquely designed 6 hp, 4-stroke motor is ideal for sailboats or any marine vessel requiring a 25" shaft outboard motor.

The light and portable ultralong also includes a 5 amp/12V charging system, charging cable and a high thrust sail drive propeller.

NSF

Built-in 5 amp/12V charging system

Charging cable included

6

Equipped with the high thrust sail drive propeller

Con v en i en c e i s w i th i n y o u r rea c h Nissan Marine 4-stroke benefits:

� Light and compact � Designed with proven technology � Sacrificial anode that protects the engine from electrolysis � Ultra Low emissions, EPA and CARB approved � Nissan Marine's 3-year limited warranty

Easy operation and handling:

� Digital CD ignition for easier engine starting, quicker throttle response and smoother trolling � Fast-idle choke system allowing easier manual choke operation � Recoil starter with larger reel making manual starting fast and easy � Shallow water drive (6/5/4) � Adjustable steering friction for reducing steering effort

The 3.5hp and 2.5hp are fully equipped with features essential to portable outboards, such as the throttle grip on the steering handle and the 360 degree full pivot steering.

With Nissan Marine, convenience is not an option...it's a given.

6/5/4 NSF 3.5/2.5 NSF

3 Year limited warranty

15

Fundamentals for user convenience and reliability:

� Through-the-prop exhaust for a quieter ride (6/5/4) � Thermostatically controlled cooling system for consistent engine temperature � Stainless steel water pump housing liner for outstanding durability � High grade marine aluminum alloy that provides the ultimate protection against corrosion � Zinc coating on internal water passages for superior corrosion resistance � Plastic fuel tank 6/5 hp : Built-in 0.3 US Gal. (1.15 liter) or Separate 3.2 US Gal. (12 liter) fuel tank with fuel fitting and fuel line 4 hp : Built-in 0.3 US gal. (1.15liter) includes fuel connector for use with an optional external fuel tank 3.5/2.5 hp : Built-in 0.26 US gal. (1.1 liter) integral tank � Aluminum propeller (6/5/4)

Protection:

� Low oil pressure indicator (6/5/4) � Safety lanyard (an essential protection feature standard on all Nissan Marine outboards) � Start-in-gear protection for safer engine starting (6/5/4) � Over-rev. limiter * Certain models

16

A perfect choice for sailboats !

Nissan Marine's uniquely designed 6 hp, 4-stroke motor is ideal for sailboats or any marine vessel requiring a 25" shaft outboard motor.

The light and portable ultralong also includes a 5 amp/12V charging system, charging cable and a high thrust sail drive propeller.

NSF

Built-in 5 amp/12V charging system

Charging cable included

6

Equipped with the high thrust sail drive propeller

Con v en i en c e i s w i th i n y o u r rea c h Nissan Marine 4-stroke benefits:

� Light and compact � Designed with proven technology � Sacrificial anode that protects the engine from electrolysis � Ultra Low emissions, EPA and CARB approved � Nissan Marine's 3-year limited warranty

Easy operation and handling:

� Digital CD ignition for easier engine starting, quicker throttle response and smoother trolling � Fast-idle choke system allowing easier manual choke operation � Recoil starter with larger reel making manual starting fast and easy � Shallow water drive (6/5/4) � Adjustable steering friction for reducing steering effort

The 3.5hp and 2.5hp are fully equipped with features essential to portable outboards, such as the throttle grip on the steering handle and the 360 degree full pivot steering.

With Nissan Marine, convenience is not an option...it's a given.

6/5/4 NSF 3.5/2.5 NSF

3 Year limited warranty

15

Fundamentals for user convenience and reliability:

� Through-the-prop exhaust for a quieter ride (6/5/4) � Thermostatically controlled cooling system for consistent engine temperature � Stainless steel water pump housing liner for outstanding durability � High grade marine aluminum alloy that provides the ultimate protection against corrosion � Zinc coating on internal water passages for superior corrosion resistance � Plastic fuel tank 6/5 hp : Built-in 0.3 US Gal. (1.15 liter) or Separate 3.2 US Gal. (12 liter) fuel tank with fuel fitting and fuel line 4 hp : Built-in 0.3 US gal. (1.15liter) includes fuel connector for use with an optional external fuel tank 3.5/2.5 hp : Built-in 0.26 US gal. (1.1 liter) integral tank � Aluminum propeller (6/5/4)

Protection:

� Low oil pressure indicator (6/5/4) � Safety lanyard (an essential protection feature standard on all Nissan Marine outboards) � Start-in-gear protection for safer engine starting (6/5/4) � Over-rev. limiter * Certain models

16

2012 Where Technology Meets Dependability

Where Technology Meets Dependability

2011