5 minute read
GTDEE INSIGHT
Online meeting with Pathumthani Brewery Apprenticeship Programme 2020
Advertisement
On 6 January 2022, GTDEE organised an online meeting with Trainers of Pathumthani Brewery Apprenticeship Programme batch 2021. This meeting discussed an adapt training plan between February-March 2022 related to the Electronics Programme, BIBB. At this meeting participants shared knowledge that the apprentices previously acquired and how they should summarize it and enter it in the logbook.
Online meeting with Automotive Teachers working with BMW Service Apprentices Programme
On 20 January 2022, GTDEE organised an online meeting with the Head of Automotive Department in cooperation with BMW Service Apprentice Programme and BMW Group Thailand Training Center. This meeting discussed the preparation for the PAL Final Examination Part 1 for BMW Service Apprentice batch 2020.
PAL Final Examination Part 1, theoretical and practical parts, in Automotive Mechatronics for BMW Service Apprentice batch 2020
Between 25 January to 27 January 2022, GTDEE organised the PAL Final Examination Part 1 in theoretical and practical, in Automotive Mechatronics for BMW Service Apprentice batch 2019. Dr. Kamonsak Suradom and independent examiners representing Industry, Academics and GTCC oversaw the examination, which was held at the BMW Group Thailand Training Centre.
Online meeting with Faculty of Engineering on International Mechatronics Programme
On 26 January 2022, GTDEE organised an online meeting with the Dean of the Faculty of Engineering, RMUTL. In May 2022, the five-year DVET International Mechatronics Programme of RMUTL’s will start at the faculty according to German standards.
Examiner Board meeting on evaluation for PAL Final Examination Part 1 at KMUTNB
On 1 February and 7 March 2022, GTDEE organised the evaluation for PAL Final Examination Part 1 in Automotive Mechatronics under cooperated GTDEE programme. In this meeting, the independent examiners board discussed the assessment of the theoretical part for apprentices from both companies in GTDEE programme.
Meeting with Technical University of Dortmund at TU Dortmund
On 7 February 2022, Mr. Markus Hoffmann, GTDEE Project Director, discussed further steps of cooperation with Prof. Dr. Dr. h.c. Thomas Schröder, UNESCO Chair on TVET and competence development for the future of work at TU Dortmund University, and his team of the “Progressing Work-based Learning of TVET System in Thailand” project (ProWoThai) in a network meeting held at the TU Dortmund University.
Visiting Europa-Lehrmittel
On 9 February 2022, the first printed Thai version of the mechatronic textbook was presented to Mr. Wolfgang Baldauf,, Verlag Europa-Lehrmittel Sales and Advertising Manager, and Mrs. Simone Bán, Rights Manager, by Mr. Markus Hoffmann, GTDEE Project Director, as he visited the Verlag Europa-Lehrmittel. It is the first Thai licensed edition of the well-known German mechatronics textbook “Fachkunde Mechatronik”, which was recently translated, printed and launched by GTCC as one of the most comprehensive mechatronics textbooks in Thailand to promote teaching and learning Mechatronics according to German TVET standards through the GTDEE programme.
Meeting on cooperation working between German-Thai on In-Company Trainer Development
On 14 February 2022, GTDEE organised an online meeting with Ms. Siriporn Parvikam, Programme Component Manager, GIZ/ RECOTVET GIZ Thailand and TPQI (Public Organisation) on the exploration of the alignment of AdA International Standard and TPQI professional qualification for In-Company Trainer.
Online meeting on Cooperation with Technical University of Dortmund and KMUTNB
On 18 February 2022, GTDEE organised an online meeting on cooperation between TU Dortmund and Faculty of Technical Education, KMUTNB. This meeting discussed about cooperation in academic area such as academic knowledge exchange in Technical Teacher Development, teacher and student exchange programme for the future.
PAL Final Examination Part 1, theoretical and practical parts, in Automotive Mechatronics for Mercedes-Benz Apprenticeship Programme batch 2020
Between 21 February to 25 February 2022, GTDEE organised the PAL Final Examination Part 1 in theoretical and practical, in Automotive Mechatronics for Mercedes-Benz Apprenticeship Programme batch 2020. Dr. Kamonsak Suradom and independent examiners representing Industry, Academics and GTCC oversaw the examination, which was held at the Mercedes-Benz Competence Centre, Bangna-Trade km. 19, Samutprakarn.
GTDEE Final Examination Part 1 in Mechatronics under “Project-Based Learning”
On 27 February 2022, GTDEE organised the GTDEE Final Examination Part 1 for students studying in Mechatronics programme at E.Tech under cooperation with GTDEE. The independent examination committee comprised the following experts from representative of Industrial, Academic and GTCC.
PAL Final Examination Part 1 in Electronics Preparation
On 9 March 2022, GTDEE organised an online meeting with Pathumthani Brewery Apprenticeship Programme batch 2020 and trainers, discussing the topic of guideline examination structure and preparing tools and equipment for PAL Final Examination Part 1 in Electronics. This examination will be held in June-July 2022.
