Plastic Coating Tools You Must Know

PLASTIC COATING TOOLS YOU MUST KNOW A plastic coating provides resistance from corrosion and impact to metals, glasses and other materials. A product that is coated with plastic will be waterproof as well as durable and coating can be used as a decorative finish for products. In industries where durability matters like automotive, medical and construction industries, coating is very essential.

Some of the tools used for plastic coating are discussed here. ďƒ˜ Plastisol

Plastisol is a liquid compound at room temperature and it is made of vinyl. It can last for years and it becomes solid vinyl when heated. It is important to note that when plastisol turns into solid, it cannot return to its liquid state. Get more info about different types Coatings here Plasma Ceramic Coating and Air Plasma Spray Coating It has the capacity to be formulated to specifications in line with FDA standards for contact with food and chemical as well as electrical requirements.

Plastisol that is processed can be produced to a shiny matte finish. It is very good for dampening sound and electrical or thermal insulation. It can also be used to eliminate sharp edges on metals in order to get a perfect finish. ďƒ˜ Powder Coating

Plastic powder coating involves the consistency of fine seaside sand prior to being processed. It is converted into fluid by reactor that is referred to as fluidized bed and it gives a resulting coat that is glossy, tough and weather resistant. Vinyl powder coating is typically found on dishwater racks, medical devices, outdoor furniture and cable TV wiring. For more info about plastic coating tools here. ďƒ˜ Fluidized Bed A fluidized bed is used for processing plastic powder that will be used for coating.

The bed of the reactor holds particles that are fluidized by a gas that passes through the vessel from the base of the tank. Subsequent to the rising of the bed to about 30%, the particles will start to resemble boiling water. This will lead to the preheating of the material and its dipping into the vessel. The powder then melts onto the material in order to form a coating.

ďƒ˜ Ovens

Electric infra red ovens are usually used for curing parts that have been coated with plastic. The flexibility of the infra red emitters makes them preferable. Infra red ovens provide the best wavelength so that deeper penetration of the plastic and high radiant applications required for majority of applications could be achieved. It is important to wash all the items that are coated in advance of the process and the ovens are used to dry them.