Transistor 2N3904 by Gerson Villa Gonzalez

MMBT3904

PZT3904 C

E C

TO-92 SOT-23

SOT-223

Mark: 1A

NPN General Purpose Amplifier This device is designed as a general purpose amplifier and switch. The useful dynamic range extends to 100 mA as a switch and to 100 MHz as an amplifier.

Absolute Maximum Ratings* Symbol

TA = 25°C unless otherwise noted

Parameter

Value

Units

VCEO

Collector-Emitter Voltage

VCBO

Collector-Base Voltage

VEBO

Emitter-Base Voltage

6.0

Collector Current - Continuous

200

TJ, Tstg

Operating and Storage Junction Temperature Range

-55 to +150

°C

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

Thermal Characteristics Symbol PD

TA = 25°C unless otherwise noted

Characteristic

RθJC

Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case

RθJA

Thermal Resistance, Junction to Ambient

Max

Units

2N3904 625 5.0 83.3

*MMBT3904 350 2.8

**PZT3904 1,000 8.0

200

357

125

mW mW/°C °C/W °C/W

*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06." **Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2.

 2001 Fairchild Semiconductor Corporation

2N3904/MMBT3904/PZT3904, Rev A

2N3904 / MMBT3904 / PZT3904

2N3904

(continued)

Electrical Characteristics Symbol

TA = 25°C unless otherwise noted

Parameter

Test Conditions

Min

Max

Units

OFF CHARACTERISTICS V(BR)CEO

IC = 1.0 mA, IB = 0

V(BR)CBO

Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage

V(BR)EBO

Emitter-Base Breakdown Voltage

IC = 10 µA, IE = 0

IE = 10 µA, IC = 0

6.0

IBL

Base Cutoff Current

VCE = 30 V, VEB = 3V

ICEX

Collector Cutoff Current

VCE = 30 V, VEB = 3V

ON CHARACTERISTICS* hFE

DC Current Gain

VCE(sat)

Collector-Emitter Saturation Voltage

VBE(sat)

Base-Emitter Saturation Voltage

IC = 0.1 mA, VCE = 1.0 V IC = 1.0 mA, VCE = 1.0 V IC = 10 mA, VCE = 1.0 V IC = 50 mA, VCE = 1.0 V IC = 100 mA, VCE = 1.0 V IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA

40 70 100 60 30

0.65

300

0.2 0.3 0.85 0.95

V V V V

SMALL SIGNAL CHARACTERISTICS fT

Current Gain - Bandwidth Product

Cobo

Output Capacitance

Cibo

Input Capacitance

Noise Figure

IC = 10 mA, VCE = 20 V, f = 100 MHz VCB = 5.0 V, IE = 0, f = 1.0 MHz VEB = 0.5 V, IC = 0, f = 1.0 MHz IC = 100 µA, VCE = 5.0 V, RS =1.0kΩ,f=10 Hz to 15.7kHz

300

MHz 4.0

8.0

5.0

SWITCHING CHARACTERISTICS td

Delay Time

VCC = 3.0 V, VBE = 0.5 V,

Rise Time

IC = 10 mA, IB1 = 1.0 mA

Storage Time

VCC = 3.0 V, IC = 10mA

200

Fall Time

IB1 = IB2 = 1.0 mA

*Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%

Spice Model NPN (Is=6.734f Xti=3 Eg=1.11 Vaf=74.03 Bf=416.4 Ne=1.259 Ise=6.734 Ikf=66.78m Xtb=1.5 Br=.7371 Nc=2 Isc=0 Ikr=0 Rc=1 Cjc=3.638p Mjc=.3085 Vjc=.75 Fc=.5 Cje=4.493p Mje=.2593 Vje=.75 Tr=239.5n Tf=301.2p Itf=.4 Vtf=4 Xtf=2 Rb=10)

2N3904 / MMBT3904 / PZT3904

NPN General Purpose Amplifier

(continued)

V CE = 5V

400 125 °C

300 25 °C

200 - 40 °C

100 0 0.1

1 10 I C - COLLECTOR CURRENT (mA)

100

Base-Emitter Saturation Voltage vs Collector Current 1

0.8

β = 10

- 40 °C 25 °C

0.6 125 °C

0.4 0.1 IC

1 10 - COLLECTOR CURRENT (mA)

100

VCESAT- COLLECTOR-EMITTER VOLTAGE (V)

500

VBE(ON)- BASE-EMITTER ON VOLTAGE (V)

Typical Pulsed Current Gain vs Collector Current

VBESAT- BASE-EMITTER VOLTAGE (V)

h FE - TYP ICAL PULSED CURRE NT GAIN

Typical Characteristics

Collector-Emitter Saturation Voltage vs Collector Current 0.15

125 °C

0.1 25 °C

0.05 - 40 °C

0.1

1 VCE = 5V 0.8

- 40 °C 25 °C

0.6 125 °C

0.4

0.2 0.1

1 10 I C - COLLECTOR CURRENT (mA)

100

10 f = 1.0 MHz

VCB = 30V

CAPACITANCE (pF)

ICBO- COLLECTOR CURRENT (nA)

100

Capacitance vs Reverse Bias Voltage

500

10 1 0.1

1 10 I C - COLLECTOR CURRENT (mA)

Base-Emitter ON Voltage vs Collector Current

Collector-Cutoff Current vs Ambient Temperature 100

β = 10

50 75 100 125 TA - AMBIENT TEMPERATURE ( °C)

150

5 4 3

C ibo

2 C obo

1 0.1

1 10 REVERSE BIAS VOLTAGE (V)

100

2N3904 / MMBT3904 / PZT3904

NPN General Purpose Amplifier

(continued)

Typical Characteristics

(continued)

Noise Figure vs Source Resistance

Noise Figure vs Frequency

12 I C = 1.0 mA R S = 200Ω

V CE = 5.0V

I C = 1.0 mA

NF - NOISE FIGURE (dB)

I C = 50 µA R S = 1.0 kΩ

I C = 0.5 mA R S = 200Ω

6 4 2

I C = 100 µA, R S = 500 Ω

0 0.1

1 10 f - FREQUENCY (kHz)

10 I C = 5.0 mA I C = 50 µA

8 6

I C = 100 µA

4 2 0 0.1

100

V CE = 40V I C = 10 mA 10 100 f - FREQUENCY (MHz)

PD - POWER DISSIPATION (W)

- CURRENT GAIN (dB) fe

θ - DEGREES

0 20 40 60 80 100 120 140 160 180

h fe

1000

SOT-223 0.75

TO-92

0.5

SOT-23 0.25

Turn-On Time vs Collector Current I B1 = I B2 =

VCC = 40V

TIME (nS)

15V t r @ V CC = 3.0V 2.0V

10 1

10 I C - COLLECTOR CURRENT (mA)

125

150

100

I B1 = I B2 =

Ic 10

T J = 25°C T J = 125°C

t d @ VCB = 0V 5

50 75 100 TEMPERATURE (o C)

Rise Time vs Collector Current

40V 100

500

t r - RISE TIME (ns)

500

100

Power Dissipation vs Ambient Temperature

Current Gain and Phase Angle vs Frequency 50 45 40 35 30 25 20 15 10 5 0

1 10 R S - SOURCE RESISTANCE ( kΩ )

100

10 I C - COLLECTOR CURRENT (mA)

100

2N3904 / MMBT3904 / PZT3904

NPN General Purpose Amplifier

(continued)

Typical Characteristics

(continued)

Storage Time vs Collector Current I B1 = I B2 =

T J = 25°C

Fall Time vs Collector Current 500

I B1 = I B2 =

t f - FALL TIME (ns)

t S - STORAGE TIME (ns)

500

100 T J = 125°C

10 5

T J = 125°C

100 T J = 25°C

10 I C - COLLECTOR CURRENT (mA)

100

10 I C - COLLECTOR CURRENT (mA)

Current Gain h oe - OUTPUT ADMITTANCE ( µmhos)

V CE = 10 V f = 1.0 kHz T A = 25oC

100

10 0.1

1 I C - COLLECTOR CURRENT (mA)

V CE = 10 V f = 1.0 kHz T A = 25oC

1 0.1

1 I C - COLLECTOR CURRENT (mA)

Voltage Feedback Ratio

) _4

V CE = 10 V f = 1.0 kHz T A = 25oC

0.1 0.1

100

Input Impedance 100

100

Output Admittance

h re - VOLTAGE FEEDBACK RATIO (x10

h fe - CURRENT GAIN

VCC = 40V

500

h ie - INPUT IMPEDANCE (kΩ )

Ic 10

10 7

V CE = 10 V f = 1.0 kHz T A = 25oC

5 4 3 2

1 0.1

1 I C - COLLECTOR CURRENT (mA)

2N3904 / MMBT3904 / PZT3904

NPN General Purpose Amplifier

(continued)

Test Circuits 3.0 V

275 Ω

300 ns 10.6 V Duty Cycle = 2%

Ω 10 KΩ 0

C1 < 4.0 pF

- 0.5 V < 1.0 ns

FIGURE 1: Delay and Rise Time Equivalent Test Circuit 3.0 V

10 < t1 < 500 µs

t1 10.9 V

275 Ω

Duty Cycle = 2% Ω 10 KΩ

C1 < 4.0 pF 1N916

- 9.1 V < 1.0 ns

FIGURE 2: Storage and Fall Time Equivalent Test Circuit

2N3904 / MMBT3904 / PZT3904

NPN General Purpose Amplifier

TO-92 Tape and Reel Data

TO-92 Packaging Configuration: Figure 1.0 TAPE and REEL OPTION FSCINT Label sample

See Fig 2.0 for various Reeling Styles

FAIRCHILD SEMICONDUCTOR CORPORATION LOT:

CBVK741B019

PN2222N

NSID:

D/C1:

HTB:B QTY: 10000

SPEC:

D9842

SPEC REV:

FSCINT Label

QA REV:

5 Reels per Intermediate Box

(FSCINT)

Customized Label

F63TNR Label sample LOT: CBVK741B019 FSID: PN222N D/C1: D9842 D/C2:

F63TNR Label

QTY: 2000 SPEC:

QTY1: QTY2:

SPEC REV: CPN: N/F: F

Customized Label

(F63TNR)3

375mm x 267mm x 375mm Intermediate Box TO-92 TNR/AMMO PACKING INFROMATION Packing

Style

Quantity

EOL code

Reel

2,000

D26Z

2,000

D27Z

Ammo

2,000

D74Z

2,000

D75Z

AMMO PACK OPTION See Fig 3.0 for 2 Ammo Pack Options

FSCINT Label

Unit weight = 0.22 gm Reel weight with components = 1.04 kg Ammo weight with components = 1.02 kg Max quantity per intermediate box = 10,000 units

327mm x 158mm x 135mm Immediate Box Customized Label

(TO-92) BULK PACKING INFORMATION EOL CODE

DESCRIPTION

QUANTITY

TO-18 OPTION STD

NO LEAD CLIP

2.0 K / BOX

J05Z

TO-5 OPTION STD

NO LEAD CLIP

1.5 K / BOX

NO LEADCLIP

2.0 K / BOX

NO LEADCLIP

2.0 K / BOX

TO-92 STANDARD STRAIGHT FOR: PKG 92, 94 (NON PROELECTRON SERIES), 96

L34Z

TO-92 STANDARD STRAIGHT FOR: PKG 94 (PROELECTRON SERIES BCXXX, BFXXX, BSRXXX), 97, 98

Customized Label

F63TNR Label 333mm x 231mm x 183mm Intermediate Box

BULK OPTION

LEADCLIP DIMENSION

J18Z

NO EOL CODE

5 Ammo boxes per Intermediate Box

See Bulk Packing Information table Anti-static Bubble Sheets

FSCINT Label

2000 units per EO70 box for std option

114mm x 102mm x 51mm Immediate Box

5 EO70 boxes per intermediate Box 530mm x 130mm x 83mm Intermediate box

Customized Label

FSCINT Label 10,000 units maximum per intermediate box for std option

March 2001, Rev. B1

TO-92 Tape and Reel Data, continued

TO-92 Reeling Style Configuration: Figure 2.0 Machine Option “A” (H)

Machine Option “E” (J)

Style “A”, D26Z, D70Z (s/h)

Style “E”, D27Z, D71Z (s/h)

TO-92 Radial Ammo Packaging Configuration: Figure 3.0 FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP

ORDER STYLE D74Z (M)

FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM

FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM

ORDER STYLE D75Z (P)

FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP

September 1999, Rev. B

TO-92 Tape and Reel Data, continued TO-92 Tape and Reel Taping Dimension Configuration: Figure 4.0

Hd P

b Ha

d L H1 HO

S WO

W2 W

t1 P1 F1 DO

User Direction of Feed

TO-92 Reel Configuration: Figure 5.0

ITEM DESCRIPTION

SYMBOL

DIMENSION

Base of Package to Lead Bend

0.098 (max)

Component Height

0.928 (+/- 0.025)

Lead Clinch Height

0.630 (+/- 0.020)

Component Base Height

0.748 (+/- 0.020)

Component Alignment ( side/side )

0.040 (max)

Component Alignment ( front/back )

0.031 (max)

Component Pitch

0.500 (+/- 0.020)

Feed Hole Pitch

0.500 (+/- 0.008)

Hole Center to First Lead

0.150 (+0.009, -0.010)

Hole Center to Component Center

0.247 (+/- 0.007)

Lead Spread

F1/F2

0.104 (+/- 0 .010)

Lead Thickness

0.018 (+0.002, -0.003)

Cut Lead Length

0.429 (max)

Taped Lead Length

0.209 (+0.051, -0.052)

Taped Lead Thickness

0.032 (+/- 0.006)

Carrier Tape Thickness

0.021 (+/- 0.006)

Carrier Tape Width

0.708 (+0.020, -0.019)

Hold - down Tape Width

0.236 (+/- 0.012)

Hold - down Tape position

0.035 (max)

Feed Hole Position

0.360 (+/- 0.025)

Sprocket Hole Diameter

0.157 (+0.008, -0.007)

Lead Spring Out

0.004 (max)

Note : All dimensions are in inches. ELECT ROSTATIC SEN SITIVE D EVICES

F63TNR Label

ITEM DESCRIPTION

SYSMBOL

MINIMUM

MAXIMUM

Reel Diameter

13.975

14.025

Arbor Hole Diameter (Standard)

1.160

1.200

0.650

0.700

Customized Label

(Small Hole)

Core Diameter

3.100

3.300

Hub Recess Inner Diameter

2.700

3.100

Hub Recess Depth

0.370

0.570

Flange to Flange Inner Width

1.630

Hub to Hub Center Width

1.690 2.090

Note: All dimensions are inches D3

July 1999, Rev. A

TO-92 Package Dimensions

TO-92 (FS PKG Code 92, 94, 96)

1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters]

Part Weight per unit (gram): 0.1977

ÂŠ2000 Fairchild Semiconductor International

January 2000, Rev. B

SOT-23 Tape and Reel Data SOT-23 Packaging Configuration: Figure 1.0 Customized Label

Packaging Description: SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table.

Antistatic Cover Tape

Human Readable Label

These full reels are individually labeled and placed inside a standard intermediate made of recyclable corrugated brown paper with a Fairchil d logo printing. One pizza box contains eight reels maximum. And these intermediate boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts shipped.

Embossed Carrier Tape

SOT-23 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag

Standard (no flow code) TNR 3,000

D87Z

7" Dia

13"

187x107x183

343x343x64

Max qty per Box

24,000

30,000

Weight per unit (gm)

0.0082

Weight per Reel (kg)

0.1175

0.4006

Reel Size Box Dimension (mm)

SOT-23 Unit Orientation

TNR 10,000

343mm x 342mm x 64mm Intermediate box for L87Z Option

Human Readable Label

Note/Comments

Human Readable Label sample

H uman readable Label

187mm x 107mm x 183mm Intermediate Box for Standard Option

SOT-23 Tape Leader and Trailer Configuration: Figure 2.0

Carrier Tape Cover Tape

Components Trailer Tape 300mm minimum or 75 empt y poc kets

ÂŠ2000 Fairchild Semiconductor International

Leader Tape 500mm minimum or 125 empty pockets

September 1999, Rev. C

SOT-23 Tape and Reel Data, continued SOT-23 Embossed Carrier Tape Configuration: Figure 3.0 P0

T E1

F E2 Wc

User Direction of Feed

Dimensions are in millimeter Pkg type

SOT-23 (8mm)

3.15 +/-0.10

2.77 +/-0.10

W 8.0 +/-0.3

1.55 +/-0.05

1.125 +/-0.125

1.75 +/-0.10

6.25 min

3.50 +/-0.05

4.0 +/-0.1

1.30 +/-0.10

0.228 +/-0.013

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C).

0.06 +/-0.02

0.5mm maximum

20 deg maximum Typical component cavity center line

5.2 +/-0.3

0.5mm maximum

20 deg maximum component rotation Typical component center line

Sketch A (Side or Front Sectional View) A0

Component Rotation

Sketch C (Top View)

Component lateral movement

Sketch B (Top View)

SOT-23 Reel Configuration: Figure 4.0

Component Rotation

W1 Measured at Hub

Dim A Max

Dim A max

See detail AA

Dim N

7" Diameter Option B Min Dim C See detail AA W3

13" Diameter Option

Dim D min

W2 max Measured at Hub DETAIL AA

Dimensions are in inches and millimeters Tape Size

Reel Option

Dim A

Dim B

Dim C

Dim D

Dim N

Dim W1

Dim W2

Dim W3 (LSL-USL)

8mm

7" Dia

7.00 177.8

0.059 1.5

512 +0.020/-0.008 13 +0.5/-0.2

0.795 20.2

2.165 55

0.331 +0.059/-0.000 8.4 +1.5/0

0.567 14.4

0.311 – 0.429 7.9 – 10.9

8mm

13" Dia

13.00 330

0.059 1.5

512 +0.020/-0.008 13 +0.5/-0.2

0.795 20.2

4.00 100

0.331 +0.059/-0.000 8.4 +1.5/0

0.567 14.4

0.311 – 0.429 7.9 – 10.9

September 1999, Rev. C

SOT-23 Package Dimensions

SOT-23 (FS PKG Code 49)

1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters]

Part Weight per unit (gram): 0.0082

ÂŠ2000 Fairchild Semiconductor International

September 1998, Rev. A1

SOT-223 Tape and Reel Data SOT-223 Packaging Configuration: Figure 1.0 Customized Label Packaging Description:

F63TNR Label Antistatic Cover Tape

SOT-223 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2,500 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or 177cm diameter reel. This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped.

Static Dissipative Embossed Carrier Tape

F852 014

SOT-223 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm)

Standard (no flow code) TNR 2,500

D84Z

SOT-223 Unit Orientation

TNR 500

13" Dia

7" Dia

343x64x343

184x187x47

Max qty per Box

5,000

1,000

Weight per unit (gm)

0.1246

Weight per Reel (kg)

0.7250

0.1532

343mm x 342mm x 64mm Intermediate box for Standard

F63TNR Label

Note/Comments

F63TNR Label

F63TNR Label sample

184mm x 184mm x 47mm Pizza Box for D84Z Option

SOT-223 Tape Leader and Trailer Configuration: Figure 2.0

LOT: CBVK741B019

QTY: 3000

FSID: PN2222A

SPEC:

D/C1: D9842 D/C2:

QTY1: QTY2:

SPEC REV: CPN: N/F: F

(F63TNR)3

Carrier Tape Cover Tape

Components Trailer Tape 300mm minimum or 38 empty pockets

ÂŠ2000 Fairchild Semiconductor International

Leader Tape 500mm minimum or 62 empty pockets

September 1999, Rev. B

SOT-223 Tape and Reel Data, continued SOT-223 Embossed Carrier Tape Configuration: Figure 3.0

T E1

F K0

Tc A0

User Direction of Feed

Dimensions are in millimeter Pkg type SOT-223 (12mm)

A0 6.83 +/-0.10

B0 7.42 +/-0.10

W 12.0 +/-0.3

1.55 +/-0.05

1.50 +/-0.10

1.75 +/-0.10

10.25 min

5.50 +/-0.05

8.0 +/-0.1

4.0 +/-0.1

K0 1.88 +/-0.10

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C).

0.292 +/0.0130

9.5 +/-0.025

0.06 +/-0.02

0.5mm maximum

20 deg maximum Typical component cavity center line

0.5mm maximum

20 deg maximum component rotation Typical component center line

Sketch A (Side or Front Sectional View) A0

Component Rotation

Sketch C (Top View)

Component lateral movement

Sketch B (Top View)

SOT-223 Reel Configuration: Figure 4.0

Component Rotation

W1 Measured at Hub

Dim A Max

Dim A max

See detail AA

Dim N

7" Diameter Option B Min Dim C See detail AA W3

13" Diameter Option

Dim D min

W2 max Measured at Hub DETAIL AA

Dimensions are in inches and millimeters Tape Size

Reel Option

Dim A

Dim B 0.059 1.5

512 +0.020/-0.008 13 +0.5/-0.2

0.795 20.2

5.906 150

0.488 +0.078/-0.000 12.4 +2/0

0.724 18.4

0.469 – 0.606 11.9 – 15.4

0.059 1.5

512 +0.020/-0.008 13 +0.5/-0.2

0.795 20.2

7.00 178

0.488 +0.078/-0.000 12.4 +2/0

0.724 18.4

0.469 – 0.606 11.9 – 15.4

12mm

7" Dia

7.00 177.8

12mm

13" Dia

13.00 330

Dim C

Dim D

Dim N

Dim W1

Dim W2

Dim W3 (LSL-USL)

July 1999, Rev. B

SOT-223 Package Dimensions

SOT-223 (FS PKG Code 47)

1:1 Scale 1:1 on letter size paper

Part Weight per unit (gram): 0.1246

ÂŠ2000 Fairchild Semiconductor International

September 1999, Rev. C

TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.

ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST 

FASTr™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™

PowerTrench  QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER  SMART START™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8

SyncFET™ TinyLogic™ UHC™ VCX™

DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification

Product Status

Definition

Advance Information

Formative or In Design

This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.

Preliminary

First Production

This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.

No Identification Needed

Full Production

This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.

Obsolete

Not In Production

This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.

Rev. G

This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.