速
D
17
D
Couplings for High-Pressure Air and Steam Hose Stem
Viton O-Ring
CampbellCrimpnology™ offers hose assembly systems for your high-pressure steam and air applications
VITON SEAL GROUND JOINT COUPLINGS, AIR HAMMER COUPLINGS, AND MALE STEMS
Permanentlyattached Ferrule
Features & Benefits • Viton Seal Couplings pass 1000 hour MIL-H-29210. Spud • Eliminates leaks with nut hand tightened. • Viton seal (formulated by DuPont for high pressure steam and air applications) is protected inside machined stem groove and by swivel nut, extending working life. • Spud does not contain plastic seat, extending working life. • Interchangeable with old-style domestic ground joint couplings. • Machined hose ends with smooth Smooth end detail to reduce End potential failure Detail due to abrasion grips, seals, and protects hose. • Interlock groove locks ferrule into place for superior holding power. • Crimped assemblies are low profile and Interlock eliminate sharp Groove edges from bolts. • Machined from carbon steel, cast ductile iron (meets ASTM A395 specification), and 316 stainless steel.
Low Profile Swivel Nut Steam Hose
NEW! Swivel Interlocking Male Stem • Designed for use with steam. • Available with staked ferrule for crimped steam applications. • Allows end-user easy connection into plant facilities.
NEW! Staked-On Ferrule for steam hose
Recommended hose attachment • Interlocking ferrules • Interlocking U-bolt clamps (Page 21)
Designed specifically for certain hose brands. Check with factory for information. • Crimped steam assemblies eliminate the need for retightening bolts. • Eliminates leaks, cuts costs caused by leaky clamps. • Ferrule serrations bite to the wire achieving electrical continuity. • Meets 250 PSI pressure rating for steam applications.
INTERLOCKING U-BOLT CLAMPS Features & Benefits • 360° design wraps completely around hose for superior retention. • Clamps fit hoses tightly without cracking, eliminating costly rework. • Bolts on “up side” allow easier tightening/ re-tightening and improve “dragability”. • Field repairable.
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1 Hose System Components Fitting/Coupling
Viton Ground Joint Coupling Male Stem and Mender Viton Ground Joint Coupling Viton Ground Joint Coupling Male Stem Male Stem
Hose Size
Attachment U-Bolt Clamp U-Bolt Clamp Staked Ferrule Long Ferrule Long Ferrule Staked Ferrule
Hose Type Steam Steam Steam Rubber Rubber Steam
2
1/2 1500 1500 1250 1000 1000 1250
3/4 1250 1250 1250 1000 1000 1250
See footnotes 1 and 2 on Page 1 18
1 1250 1250 1250 1000 1000 1250
1-1/4 1250 1250 – 1000 1000 –
1-1/2 1250 1250 – 1000 1000 –
2 2-1/2 3 1250 800 500 1250 800 500 – – – 1000 650 400 1000 650 400 – – –
4 500 500 – 400 400 –
6 – – – – – –
8 – – – – – –
VITON SEAL GROUND JOINT COUPLINGS
D
速
VITON SEAL HOSE STEM (staked ferrule & low profile nut) Steel hose size 1/2 3/4 1
Plated Steel part number ** ** **
list each ** ** **
VITON SEAL HOSE STEM (staked ferrule & wing nut)
DISTRIBUTOR AUTHORIZATION Safety is of paramount concern to everyone. Due to the volatile nature of compressed air and steam, and in accordance with our ISO 9000 quality system, we reserve the right to restrict sales of our Ground Joint Viton速 Seal Couplings and U-Bolt Clamps to only those distributors authorized by Campbell Fittings. Please contact our customer service department for more information.
FEMALE SET (with low-profile nut) Steel/Ductile Iron hose size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
part number RGJF-2 RGJF-3 RGJF-4 RGJF-5 RGJF-6 RGJF-8 RGJF-10 RGJF-12 RGJF-16
list each 30.09 36.44 37.60 65.97 61.83 74.48 199.67 208.00 471.78
316 Stainless 1/2 3/4 1
RGJFSS-2 235.93 RGJFSS-3 244.77 RGJFSS-4 270.99
FEMALE SET (with wing nut) part number GJF-2 GJF-3 GJF-4 GJF-5 GJF-6 GJF-8 GJF-10 GJF-12 GJF-16
list each ** ** **
list each 30.09 36.44 37.60 65.97 61.83 74.48 199.67 208.00 471.78
part number IMS-3SW
list each 32.98
Plated Steel hose size 3/4
part number **
list each **
INTERLOCKING MALE STEM VITON SEAL HOSE STEM
Steel npt x hose 1/4 X 1/4 1/4 X 3/8 3/8 X 1/4 3/8 X 3/8 3/8 X 1/2 1/4 X 1/2 1/2 X 3/8 1/2 X 1/2 1/2 X 3/4 3/4 X 1/2 3/4 X 3/4 3/4 X 1 1 X 3/4 1X1
part number IMS-1 IMS-1X38 IMS-38X1 IMS-38 IMS-38X2 IMS-1X2 IMS-2X38 IMS-2 IMS-2X3 IMS-3X2 IMS-3 IMS-3X4 IMS-4X3 IMS-4
list each 6.24 6.94 7.19 5.39 7.22 7.22 9.65 6.01 13.06 15.17 9.24 20.61 20.25 13.57
Machined Ductile Iron 1-1/4 X 1-1/4 1-1/2 X 1-1/2 2X2 2-1/2 X 2-1/2 3X3 4X4
IMS-5 IMS-6 IMS-8 IMS-10 IMS-12 IMS-16
20.72 22.65 30.73 57.73 78.74 138.58
316 Stainless 1/2 X 1/2 3/4 X 3/4 1X1
IMSS-2 IMSS-3 IMSS-4
71.43 77.92 79.55
INTERLOCKING MALE STEM (with staked ferrule)
Steel/Ductile hose size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
part number ** ** **
hose size 3/4
SWIVEL MALE STEM (with staked ferrule for use with steam)
Steel hose size 1/2 3/4 1
SWIVEL MALE STEM (for use with steam)
Steel hose size 1/2 3/4 1
part number ** ** **
list each ** ** **
Steel hose size 1/2 3/4 1
part number GJS-2 GJS-3 GJS-4
list each 9.60 15.30 16.46
Machined Ductile Iron 1-1/4 1-1/2 2 2-1/2 3 4
GJS-5 GJS-6 GJS-8 GJS-10 GJS-12 GJS-16
25.38 25.38 31.82 54.25 85.11 157.95
316 Stainless 1/2 3/4 1
GJSS-2 GJSS-3 GJSS-4
84.55 90.70 115.30
VITON SEAL MALE END (Viton seal x male npt) Steel npt size 3/4 1 1-1/2 2
part number GJMS-3 GJMS-4 GJMS-6 GJMS-8
list each 47.61 47.61 77.80 82.04
VITON SEAL FEMALE END (Viton seal x female npt) Steel npt size 3/4
part number GJFS-3
list each 97.64
** Contact Customer Service for part numbers, prices, and availability
Viton should never be used with ammonia.. Please contact our engineering department for information on all our gasketing materials. 19
HEAVY DUTY VITON SEAL AIR HAMMER COUPLINGS
PHONE 800-367-3678 FAX 800-367-3670
FEMALE SPUD
LOW PROFILE NUT
Steel npt size 1/2 3/4 1
Machined Ductile Iron part number GFS-2 GFS-3 GFS-4
list each 15.26 13.17 13.17
Machined Ductile Iron 1-1/4 1-1/2 2 2-1/2 3 4
GFS-5 GFS-6 GFS-8 GFS-10 GFS-12 GFS-16
27.79 24.72 28.78 80.43 61.41 149.16
316 Stainless 1/2 3/4 1
GFSS-2 GFSS-3 GFSS-4
73.78 79.95 81.48
size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
part number RGN-2 RGN-3 RGN-3 RGN-5 RGN-5 RGN-8 RGN-10 RGN-12 RGN-16
list each 4.90 7.98 7.98 12.43 12.43 13.89 62.14 54.12 153.56
316 Stainless 1/2 3/4 1
RGNSS-2 RGNSS-3 RGNSS-3
77.11 86.65 86.65
WING NUT MALE SPUD part number GMS-2 GMS-3 GMS-4
list each 21.35 20.17 21.21
Machined Ductile Iron 1-1/4 1-1/2 2 2-1/2 3
GMS-5 GMS-6 GMS-8 GMS-10 GMS-12
48.27 46.50 48.99 120.51 127.24
DOUBLE SPUD part number GDS-2 GDS-3 GDS-3
list each 35.10 34.38 34.38
Machined Ductile Iron 1-1/4 1-1/2 2 2-1/2 3
GDS-5 GDS-5 GDS-8 GDS-10 GDS-12
size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
part number GN-2 GN-3 GN-3 GN-5 GN-5 GN-8 GN-10 GN-12 GN-16
list each 4.90 7.98 7.98 12.43 12.43 13.89 62.14 54.12 153.56
58.50 58.50 59.98 124.31 131.62
SOCKET WELD SPUD part number GWSS-3 GWSS-4
list each 79.95 81.48
All steel and machined ductile iron parts are zinc plated. DuPont Viton is the best O-ring material for couplings used in both air and steam applications. For special applications, O-rings of other materials are available upon request. 20
part number RHJF-3 RHJF-4
list each 53.74 49.29
FEMALE SET (with wing nut) Steel/Ductile Iron hose size 3/4 1
part number HJF-3 HJF-4
list each 53.74 49.29
part number HJS-3 HJS-4
list each 18.08 15.75
part number HFS-3 HFS-4
list each 23.08 21.09
part number HMS-3 HMS-4
list each 30.54 28.67
HOSE STEM
hose size 1/2 3/4 1 1-1/4 1-1/2 2
part number IHM-2 IHM-3 IHM-4 IHM-5 IHM-6 IHM-8
list each 20.56 21.64 31.81 45.87 62.13 38.47
size 3/4 1
part number GDC-3 GDC-3
list each 50.57 50.57
hose size 3/4 1
FEMALE SPUD
part number VO-2 VO-3 VO-3 VO-5 VO-5 VO-8 VO-10 VO-12 VO-16
npt size 3/4 1
MALE SPUD Steel
VITON O-RING size 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
Steel
Steel
DEAD-END
316 Stainless size 3/4 1
hose size 3/4 1
INTERLOCKING HOSE MENDER Steel
Steel size 1/2 3/4 1
Steel/Ductile Iron
Machined Ductile Iron
Steel npt size 1/2 3/4 1
FEMALE SET (with low profile nut)
list each 0.92 1.08 1.08 1.99 1.99 2.75 4.20 5.78 6.38
npt size 3/4 1
LOW PROFILE SWIVEL NUT Ductile Iron size 3/4 1
part number RHN-3 RHN-3
list each 12.60 12.60
D
®
WING NUT
INTERLOCKING U-BOLT CLAMPS
Ductile Iron size 3/4 1
part number HN-3 HN-3
list each 12.60 12.60
part number HDS-3 HDS-3
list each 31.13 31.13
DOUBLE SPUD Steel size 3/4 1
DEAD END
SINGLE U-BOLT
Steel size 3/4 1
part number HDC-3 HDC-3
hose o.d. min 13/16 1-1/16 1-3/32
list each 62.61 62.61
hose o.d. max 1-1/32 1-1/4 1-3/8
hose size 1/2 3/4 3/4
part number IC-2 IC-3S IC-3
list each 7.32 9.15 9.08
hose o.d. max 1-1/2 1-11/16 2 2-3/16 2-3/8 2-11/16 2-15/16 3-9/32 3-9/16
hose size 1 1 1-1/4 1-1/2 1-1/2 2 2 2-1/2 2-1/2
part number IC-4 IC-4L IC-5 IC-6 IC-6L IC-8 IC-8L IC-10 IC-10L
list each 17.14 17.14 30.71 29.80 25.91 35.81 30.48 45.42 62.49
hose o.d. max 3-3/4 4-1/8 4-1/2 4-3/4 5-1/8 5-1/2
hose size 3 3 3 4 4 4
part number IC-12S IC-12 IC-12L IC-16S IC-16 IC-16L
list each 70.09 74.53 109.71 210.34 210.34 344.93
DOUBLE U-BOLT
CASTING
•
HOSE
•
FITTING
LINER
hose o.d. min 1-5/16 1-1/2 1-9/16 1-15/16 2-3/16 2-11/32 2-11/16 3 3-9/32
TRIPLE U-BOLT
•
hose o.d. min 3-5/16 3-11/16 4-1/16 4-5/16 4-11/16 5-1/16
•
•
U-BOLT
For your convenience, clamps are available bulk packed, upon request. Bulk pack price is the same as listed above. (IC-2 through IC-4L are packed 25 pieces per carton. IC-5 through IC-8L are packed 10 per carton.)
WHIP CHECK SAFETY CABLE (hose to hose) hose size 1/2 3/4 1 1-1/4 1-1/2 2 This 2" 1000 psi rated hose exploded in a test at 5200 psi. The hose exceeded its minimum 4X safety factor. The fitting and clamp exceeded the capacity of the hose.
part number WC-1 WC-1 WC-1 WC-2 WC-2 WC-2
list each 20.66 20.66 20.66 34.27 34.27 34.27
FERRULES FOR GROUND JOINT COUPLINGS, AIR HAMMER COUPLINGS, AND MALE STEMS
21
PHONE 800-367-3678 FAX 800-367-3670
FERRULES
FERRULES for ground joints Plated Steel hose size 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 1 1 1 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 1-1/2
ferrule i.d. 1 1-4/64 1-8/64 1-16/64 1-20/64 1-24/64 1-28/64 1-32/64 1-32/64 1-36/64 1-40/64 1-44/64 1-48/64 1-52/64 1-52/64 1-56/64 1-60/64 1-60/64 2 2-4/64 2-8/64 2-12/64 2-16/64 2-20/64 2-24/64
part number FPS050100S FPS050104S FPS050108S FPS075116 FPS075120 FPS075124 FPS075128 FPS075132 FPS100132 FPS100136 FPS100140 FPS100144 FPS100148 FPS100152 FPS125152L FPS125156L FPS125160L FPS150160L FPS150200L FPS150204L FPS150208L FPS150212L FPS150216L FPS150220L FPS150224L
list each 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48 9.86 9.86 9.86 9.86 9.86 9.86 13.21 13.21 13.21 15.81 15.81 15.81 15.81 15.81 15.81 15.81 15.81
2 2 2 2 2 2 2 2 2-1/2 2-1/2 2-1/2 2-1/2 2-1/2 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4
2-32/64 2-36/64 2-40/64 2-44/64 2-48/64 2-52/64 2-56/64 2-60/64 3-8/64 3-12/64 3-16/64 3-20/64 3-28/64 3-36/64 3-40/64 3-44/64 3-48/64 3-52/64 3-56/64 3-60/64 4 4-40/64 4-44/64 4-48/64 4-52/64 4-56/64 4-60/64 5 5-4/64
FPS200232L FPS200236L FPS200240L FPS200244L FPS200248L FPS200252L FPS200256L FPS200260L FPS250308L FPS250312L FPS250316L FPS250320L FPS250328L FPS300336L FPS300340L FPS300344L FPS300348L FPS300352L FPS300356L FPS300360L FPS300400L FPS400440L FPS400444L FPS400448L FPS400452L FPS400456L FPS400460L FPS400500L FPS400504L
19.20 19.20 19.20 19.20 19.20 19.20 19.20 19.20 26.40 26.40 26.40 26.40 26.40 27.07 27.07 27.07 27.07 27.07 27.07 27.07 27.07 36.75 36.75 36.75 36.75 36.75 36.75 36.75 36.75
These ferrules should never be used for steam applications
For a complete listing of all Ferrules and Sleeves, go to Section G.
22