60
Page Order Index & Product Features
P1
Suggestions to Parents & Safety Guidelines
P2
Parts List & Safety Instructions During Assembly and Operation
P3
Assembly Steps to Re-build the Nozzle & Pumping Device
P4
Scientific Principles
P5
Air Pressure Experiment
P6
Model 1 Jet Car
P7
Model 2 Scooter
P9
Model 3 Sprinkler
P11
Model 4 Segway
P13
Model 5 Water Gun Game
P15
Model 6 Speed Racer
P17
Product Features ˙"Air and water" are the natural resources that are close to us, available at all time. We've once again used air and water to innovate and create an even more convenient super hydro kinetic series for the happiness of mankind and for a clean, fun, and friendly Earth. Let's explore the secrets of air and water; come and experience the unpolluted fun of air pressure water sprays with your children!
Learning
˙ The 18 pages colour instruction manual details the assembly of six models so that children can happily experiment and practice from basic assembly.
˙ Aside from detailed assembly steps, the instruction manual also has physics and science applications, so that children can learn the basic knowledge of air pressure and water through play.
˙ The block designs can be changed at will to create your own unique and fun model.
Innovation ˙ Include your own unique experiences and thoughts, from action to innovation, and
1
guide children to add their unique ambitions and creative thinking to develop even more models using air and water; let children better explore the secrets of air and water!
Suggestions to Parents
˙ Please read carefully this instruction manual and follow all safety instructions. We suggest that you refer to the instructions within the manual to assemble models so as to gain a better understanding of the various possible combinations that will help you build the model you want.
˙ This toy is suitable for children above 8 years of age; the biggest feature is the ability to build intricate and fun models to explore how mankind converts "water and air pressure" into kinetic energy.
˙ Explain all safety instructions to children before use. This includes the function of parts, number of parts, and potential risks. After each operation, please count all parts before returning them to the box.
Safety Guidelines
˙ Carefully read the instruction manual before use. ˙ When the pressurized bottle is half filled with water, do not pump the air more than 60 times. The normal pumping of air, according to the operation instructions, ensures the safety of the product.
˙ Do not use other tools to pump air in case of unforeseen risks. ˙ If the pressurized bottle is filled with pressurized air, do not hit or drop it to avoid damage to the pressurized bottle!
˙ Do not use standard PET bottles as a replacement for the pressurized bottle. ˙ Do not use force to bend or pull the product; if there are any cracks in the product, the air cannot be pressurized.
Warning This set of toys is not suitable for children under three years old. Young children might swallow the small parts. Keep toys in a place that children can’t reach.
2
Parts List 1
2
3
4
5
6
7
1
8
2 3 4 5 6
x1
x1
x1
x1
x1
x2
x1
x5
9
10
11
12
13
14
15
16
7 8 9 10 11 12 13 14
x3
x2
x2
x2
x2
x4
x2
x2
15 16 17
17
18
19
20
21
22
23
24
18 19 20 21 22
x2
x5
x13
x1
x1
x4
x1
x1
23 24
Peg/Axle remover Big pump Plastic bottle Front fixing rim Released clip O ring Tube-B 80mm Axle connector Axle 90 degree converter (L) 90 degree converter (R) Prolate rod (7 holes) Prolate rod (11 holes) Button fixer 3-Hole rod (side no hole) 5-Hole rod (side no hole) Rod Extra loose peg Peg DR. Axle 100mm XL DR. Axle 150mm Wheel Shell side curve (L) Shell side curve (R)
Safety Instructions During Assembly and Operation ˙ The tube should not be folded. ˙ Ensure that the tube and connector are properly connected. ˙ Do not pull on the connecting area of the nozzle and cap. ˙ The area connecting to the base of the bottle must put O ring first so that the air will not leak. ˙ Do not pull on the spring of the release clip. ˙ When pumping air, ensure that the release clip is fixed to the model. ˙ Newly opened products are completely dry and adding pressurized air into the bottle will cause leaking; this is a normal occurrence. Add some water into the bottle and a tight seal will be created to hold air. ˙ Before playing, prepare a deep bucket of water. When all water has been sprayed, immerse the model in the bucket and pump under water to inject more water into the model. ˙ When putting the model away, remember to release all air and water within the bottle. ˙ Use the"A"end of the Peg/Axle remover to pull off the peg
3
Push
Assembly Steps to Re-build the Nozzle
Assemble the nozzle.
Assemble the O ring.
Assembly Steps for the Pumping Device
1
Push
2
Tight the nut. You can adjust the direction of nozzle before tighting the nut.
3
Push
Assemble the release clip.
4
Assemble the rubber O ring.
6
5 half full
Assemble the tube.
Filled half of the water.
7
Assemble and tight the bottle.
8 water tube
Adjust the tube to be down into the water.
Pump 40-60 times.
Do not drop it to the ground.
4
Scientific Principles
The principle behind a pressurized water spray: Air is a gas that can be pressurized. In other words, you can use pressure to reduce the mass of air; however, water does not behave in the same manner. When you add water into the bottle, water will also take up a fixed amount of volume. As the space in a bottle is limited, the water that takes up more space than air will compress the air within. This results in internal air pressure that is far greater than the external air pressure. This pressurized air pushes on the water within the bottle and, in turn, water pushes at the sides of the bottle in an attempt to escape and balance the pressure. When the pressurized bottle is filled with water and then pumped, more air is added to the fixed amount of space that's not been taken by the water; therefore, internal air pressure becomes greater. This phenomenon explains many physics principles: 1. Water has very low compressibility while air has high compressibility. 2. Boyle's Law: At constant temperature for a fixed mass, the absolute pressure and volume of 1 2 = V2/V1）. 2 1 a gas are inversely proportional (P1V Adding more air into a fixed 2 1 （P1/P2 1 2 = P2V1) container results in an increase of air pressure. 3. Pascal's Principle is also known as Pascal's Law and it defines fluid (gas or liquid) mechanics. This means when a change in pressure occurs on a confined fluid in a container, this pressure will be completely conveyed to all areas of the fluid and container walls.
Air pressure can be multiplied by compressing air density to half of its original volume.
5
Air Pressure Experiment Kids, you can try this experiment by putting a sponge into the pressurized bottle and then pumping air into it. As air can enter the pores of the sponge, it will not show any changes in volume even if air pressure increases within the bottle. Now try the same experiment but replace the sponge with styrofoam and observe the changes that occur. This experiment allows the observation of the direct impact of air pressure. As styrofoam has higher density than a sponge, air cannot enter it so when pressure in the bottle increases, styrofoam will be compressed by air. Now think, what if we put in a solid object? What other dierences can occur?
Pump Sponge Styrofoam After pump
Sponge Styrofoam
Before pump
Little Fact Kids, now that you know the impact of air pressure, do you know that air pressure exists everywhere in nature? Scientists deďŹ ne natural air pressure as: 3.5kg/cm2 of pressurized air is akin to 3.4 atmospheric pressures. When comparing potential energy, 1 atm = 10.336 meters of water pillar = 0.5 meters in water pillar pressure (similar to a 10 story building). Therefore, when you pump air into the bottle, the atmospheric pressure stored within can propel many of your unique models and allow them to operate.
6
Jet Car
Model 1
Kit Contents 1
2
3
4
5
6
x1
x1
x1
x1
x1
x1
7
17
19
20
21
22
x1
x2
x4
x1
x1
x4
1
Incline l'anneau lors deassembly. l'assemblage Slant the part when
See steps for the pumping "Assembly Réfère-toi à l'assemblage de la
device page to2)assemble pump " (page pompe avant dethe comfimencer. rst.
Es
sXie
2
EsD siRe. u
RX.X ALX(
1L5E c1m5 )0m
m
A–X
gLraE n1 d 0( 0 10m cm m
)
7
Lu D –
Model 1
Jet Car
3
Tip Astuce :
Laisse1mm un espace d’environ 1 mm Leave gap between rod entre la roue et la barre pour and wheel, the axle will rotate assurer un mouvement fluide. smoothly.
COMPLETE How to Play jouer : Comment
Tip Astuce : Up Haut
Bas Down 1. Vérifie queall leswheels roues tournent sans sure are rotating 1. Make accroc avant de jouer. smoothly before playing the model. 2. Pompe entre 40 et 60 fois. fullsurofune water, pumping 2. Half 3. Joue surface plane et 40~60 à times. l'extérieur. 3. Play on the flat ground. 4. Ouvre la pince. Attention, l'eau peut t'asperger 4. Open the !release clip, the water will spray out of the nozzle.
Gauche Left
Droite Right
You can choisir adjust lathe directions Tu peux direction de of nozzle to turn l'embout ! car left or right.
8
Scooter
Model 2
Kit Contents 1
2
3
4
5
6
x1
x1
x1
x1
x1
x1
7
8
12
13
14
15
16
x1
x2
x2
x2
x4
x2
x2
17
19
20
21
22
23
See "Assembly steps for the pumping device" Réfère-toi page toà assemble l'assemblage the pump de la pompe (page 2) first.
24
avant de commencer.
x2
x8
x1
x1
x4
x1
1
x1
2 3
lors deassembly. l'assemblage SlantIncline the l'anneau part when
4
150mm XL DR. AXLE
9
Model 2
5
Scooter
6
DR. AX LE
100mm
g p
COMPLETE Comment How to Playjouer :
Tip Astuce : Up
Down Vérifie que les roues tournent sans sure all wheels are rotating 1.1.Make accroc avant de jouer. smoothly before playing the model. 2. Pompe entre 40 et 60 fois. fullune ofsurface water, pumping 40~60 2.3.Half Joue sur plane et à l'extérieur. times. 4. Ouvre la pince. Attention, l'eau peut 3.t'asperger Play on ! the flat ground. 4. Open the release clip, the water will
Left
Right
Tu peux la direction de You canchoisir adjust the directions of l'embout ! nozzle to turn car left or right.
spray out of the nozzle.
10
Sprinkler Model 3 Kit Contents 1
2
3
4
5
6
x1
x1
x1
x1
x1
x1
7
8
11
12
13
14
16
x1
x1
x2
x2
x2
x4
x2
17
19
23
24
x2
x8
x1
x1
A
1
See " Assembly steps for the pumping device" page to assemble the pump ďŹ rst.
3 Slant the part when assembly.
2 11
Model 3
B
1
B
Sprinkler
2
3 A ＋
B COMPLETE
How to Play Tip Tip 1. Pumping 30~40 times. 2. Play on the flat ground. 3. Open the release clip, the nozzle will Adjust the water bottle back and forth to balance the model.
spray water in a circle. Push the nozzle to the left down, the model will rotate finely.
12
Segway
Model 4
Kit Contents 1
2
3
5
6
8
x1
x1
x1
x1
x1
x2
12
13
16
x2
x2
x2
17
x2
19
x6
20
21
22
23
24
x1
x1
x4
x1
x1
3
1 See " Assembly steps for the pumping device " page to assemble the pump first. Skip step#4, no tube needed.
. AXLE XL DR
150mm
4
L w
2 13
Model 4
Segway
5 6
COMPLETE
Tip Astuce :
DR.
Tip Astuce :
AXL
E 10 0mm
How to Play jouer : Comment
Up Haut
Bas Down
Leave gap between rod and Laisse1mm un espace d’environ 1 mm wheel, theroue axleet will entre la la rotate barre smoothly. pour
assurer un mouvement fluide.
Gauche Left
Droite Right
Youpeux can choisir adjust lathe directions Tu direction de of nozzle to !turn car left or right. l'embout
1. Make Vérifie que tournent surelesallroues wheels aresans rotating 1. accroc avantbefore de jouer. smoothly playing the model. 2. Pompe entre 40 et 60 fois. 2. Half full of water, pumping 40~50 3. Joue sur une surface plane et à times. l'extérieur. 3. onlathe flatAttention, ground. l'eau peut 4. Play Ouvre pince. t'asperger ! release clip, the water will 4. Open the
spray out of the nozzle.
14
Water Gun Game
Model 5
Kit Contents 2
1
x1
x1
3
5
x1
x1
7
6
x1
x1
9
x2
10
11
12
13
14
15
16
x2
x2
x2
x2
x2
x2
x2
17
18
19
20
22
23
24
x2
x4
x8
x1
x4
x1
x1
2
1
3 AXLE
DR. 10cmAXLE 100mm
15
4
Model 5
Water Gun Game
6 5
COMPLETE
See
" Assembly
steps for the pumping
device" page to assemble the pump first.
Tip Astuce :
Comment How to Play jouer :
Laisse un espace Leave 1mm gapd’environ between1 mm rod entrewheel, la rouethe et laaxle barrewill pour and rotate assurer un mouvement fluide. smoothly.
1. Pompe 40 etpumping 50 fois 40~50 full entre of water, 1. Half 2. Vise une roue et ouvre la times. pince. Le tourniquet va alors 2. Aim the wheel and open the release tourner ! clip, the model will rotate.
Ne vise jamais les objets ou les personnes avec le jet du pistolet à eau.
16
Speed Racer
Model 6
Kit Contents 1
x1
3
4
5
x1
x1
x1
2
x1
6
7
x1
10
11
12
13
15
x2
x2
x2
x2
x2
18
19
20
21
22
8
x1 x2 17
x2 23
24
See "Assembly steps for the pumping device" page to assemble the pump ďŹ rst.
1 x2
x12
x1
x1
x4
x1
x1
2 Slant the part when assembly.
4 3
17
Model 6
DR
Speed Racer
5
.A
XL
E
10
0m
m
E
XL
XL
A R.
m
0m
15
6
D
Tip Up
Down
Left
Right
You can adjust the directions of nozzle to turn car left or right.
COMPLETE Tip
Leave 1mm gap between rod and wheel, the axle will rotate smoothly.
How to Play
1. Make sure all wheels are rotating smoothly before playing the model. 2. Half full of water, pumping 40~60 times. 3. Play on the at ground. 4. Open the release clip, the water will spray out of the nozzle.
18
WIND TURBINE #7400 5 Models to build 77 PCS
SOLAR BUGGY #7399 5 Models to build 37 PCS
ANIMAL MACHINES #7336 8 Models to build 89 PCS
SOLAR EVOLUTION #7346 5 Models to build 142 PCS
WATER POWER #7323 15 Models to build 165 PCS
ULTRALIGHT AIRPLANE #7402 5 Models to build 44 PCS
RUBBER BAND RACERS #7403 5 Models to build 71 PCS
SPACE MACHINES #7337 10 Models to build 255 PCS
SMART MACHINES #7416 8 Models to build 230 PCS
MADE IN TAIWAN
201508 V01-01