Firebird by Elco Retrofit Burner The Firebird by Elco low NOx burners which were introduced into the market in 2018 have exceeded all expectations in delivering outstanding combustion performance and clean burn technology. A major advantage of the Firebird by Elco burners is that they can be retrofitted to the full Firebird condensing and standard efficiency boiler range. Engineers and installers who require any information, such as compatibility settings, please call our Technical Support on 026 45253 or visit our website. Go green without costing the earth The Firebird by Elco low NOx burners were introduced to meet challenging and stringent NOx emission levels demanded by the 2018 ErP Directive legislation changes (ErP Directive NOx emission limit at 120 mg/kWh). Independent evaluation of the NOx levels measured has demonstrated levels in the region of 60-80 mg/kWh depending on the model (outputs available from 12 to 100 kW) and has proven reduced carbon emissions. The Firebird by Elco burners easily beat the ErP Directive limits and are future proof against possible further legislation. By retrofitting a new Firebird by Elco burner to an existing boiler, or by purchasing a new Envirogreen boiler, you will contribute significantly to reducing NOx emissions. The “light blue flame” single stage burner solution, based on Elco patented combustion technology and efficient settings means using less liquid fuel, good for the environment and costing less to run. Easy to install, service and maintain All Firebird by Elco burners are factory pre-set (12.5% CO2 when 20°C ambient temperature) in order to achieve the highest level of efficiency, requiring only minor adjustments in fuel pressure and air for field conditions. The Firebird by Elco burners have been manufactured with installers in mind, featuring a design that is straightforward to fit and simple to maintain. Key components can be removed and adjusted with a single 4mm Allen key. All parts are easy to access thanks to a dedicated servicing position and a simple layout, plus a “Plug & Play” system for component removal. There is an informative video on how easy the burner is to install on our website. For advice on reducing NOx emissions and reducing your carbon footprint either by retrofitting our burners or fitting new boilers, please contact us at 026 45253 or visit our website: www.firebird.ie.
19