Diy wine rack

DIY Wine Rack

06/10/2013





Search this website…

Project Galleries

Home

In the press

Blog

About

Contact Us





search

Favorite Tools

Wine Rack – DIY March 8, 2013 By Shanty2Chic 73K+

Hey guys!

Recently, our friends at Ryobi Tools challenged us to come up with a cheap and easy wine rack to be featured on Ryobi Nation. We love a good challenge like this! So… Here is how our ‘Shanty’ Wine Rack turned out…

http://www.shanty-2-chic.com/2013/03/wine-rack.html

1 / 13

DIY Wine Rack

06/10/2013

Today we will be showing you all how to make this simple rustic chic wine rack for under $15. Can’t beat that!

Here are the supplies you will need for this project…

1 – 2×6 cut at 38″ 5 – 2×4 cut at 10″ 10 – 5/16 x 4 1/2″ hex bolts (we found ours on the hardware aisle for $.38 a piece) 10 – 2 1/2″ wood screws wood glue finishing supplies Now let’s get started!

We used our Ryobi 10″ compound miter saw to make all the cuts. This saw makes it simple and quick! We had them done in no time!

Before attaching all of our pieces, we like to sand all of our corners and edges down a bit. http://www.shanty-2-chic.com/2013/03/wine-rack.html

2 / 13

DIY Wine Rack

06/10/2013

We love the look it gives the finished piece! Ryobi’s 18V ONE+ Corner Cat Finish Sander is one of our very favorite tools. It isn’t bulky or heavy at all, and the power this tool gives is awesome! LOVE. We use it all the time and it’s perfect for this job.

Elegantes Pasteles www.Sacher.com.mx De Bodas. Sorprende a Tus Invitados Mira toda Nuestra Galería, Aquí!

This is what the edges look like after we finished sanding.

Search this website…

search

Subscribe Get all of our posts delivered straight to your inbox!

Enter your email address...

http://www.shanty-2-chic.com/2013/03/wine-rack.html

Go

3 / 13

DIY Wine Rack

06/10/2013

We started by marking our 2×6 board. We lined up our 2×4 piece every 6″ and marked lines on the bottom and top of the 2×4. We did this to both sides of the 2×6 board.

Before attaching our 2×4′s to our 2×6, we put 2 holes in the top and front of each 10″ piece. You want them really close to the front. Ours are about 1/4″ from the edge.

http://www.shanty-2-chic.com/2013/03/wine-rack.html

4 / 13

DIY Wine Rack

06/10/2013

We used our Ryobi 18V Lithium-Ion Drills for this part! This is hands down our favorite drill we have ever used! It has so many cool features that set it apart from others, and it’s lightweight.

Next, we added a line of Gorilla wood glue onto our 2×4 pieces and clamped them to the 2×6 where we made our marks. Easy!

http://www.shanty-2-chic.com/2013/03/wine-rack.html

5 / 13

DIY Wine Rack

06/10/2013

We used our drill to pre-drill 2 small holes where each 2×4 piece would sit.

Now we used our drill to insert our wood screws through those holes. This is what the back of the 2×6 looks like where each 2×4 sits.

After we had all of our boards attached, we gave the whole piece a coat of our favorite…

http://www.shanty-2-chic.com/2013/03/wine-rack.html

6 / 13

DIY Wine Rack

06/10/2013

Rust-Oleum Ultimate Wood Stain in Dark Walnut (You can find it at Lowe’s!) . After it dried we went back over the edges and corners again with our Ryobi Corner Cat to give it a worn finish. Love it!

We decided to ‘shanty’ it up a bit by adding a small label on the front of each board using Rust-Oleum chalkboard spray paint. We just taped the area off with blue tape and spray painted the Rust-Oleum chalkboard paint on. Totally optional!

Our final step was adding our hex screws. Just insert 1 into each of the holes and you are set!

Make sure to use anchors on the wall if you can’t attach yours to a stud.

Here is ours all finished up!

http://www.shanty-2-chic.com/2013/03/wine-rack.html

7 / 13

DIY Wine Rack

http://www.shanty-2-chic.com/2013/03/wine-rack.html

06/10/2013

8 / 13

DIY Wine Rack

http://www.shanty-2-chic.com/2013/03/wine-rack.html

06/10/2013

9 / 13

DIY Wine Rack

06/10/2013

Hope you love it! Ash and I had so much fun working on this one together!

Make sure to check out Ryobi Nation! It is one of our FAV sites! You get to share your own projects every month and vote on others. They do AMAZING tool giveaways for the winners‌ What is not to love about a site like that??

http://www.shanty-2-chic.com/2013/03/wine-rack.html

10 / 13

DIY Wine Rack

06/10/2013

Thanks so much for stopping by! We hope you guys have an awesome weekend! Make sure to share your Shanty inspired creations with us over on our Facebook page! We love seeing and sharing them!

YOU MIGHT ALSO LIKE

HomeGoods Giveaway!

What to Eat to Stay Thin

Biggest Interior Design Blunders To Avoid

My New 'Babysitter'...

73K+

12 Comments Filed Under: Wall Decor, Wood Stain Projects, Woodworking Projects

Follow Us Here

Subscribe Get all of our posts delivered straight to your inbox!

Enter your email address... Go

11 comments Leave a message...

Best

Community

Avatar Mark Waschek • 6 months ago This is a great project! I can't tell from the pictures. How did you hang the wine rack? screw through the 2x6 into a stud?

13

Reply

Share ›

Avatar Linda Crandall • 3 months ago I made two of these this afternoon with scrap wood left in my bin! I gave one away for a house warming gift and hung the other in my dining area. I love them. Thank you for sharing!

Reply

Share ›

Avatar Alyssa • 5 months ago Hi! We just did this project and it turned out great!! Except for one this, the wine bottles don't fit! All but one bottle we purtchased are too wide and don't fit behind the screws. We did tall nails instead of hex screws, but they are still inserted as close to the edge as possible. We could take the 2x4s off but I'm worried that with the wood glue it will mess up the 2x6. Do you have any suggestions on how to fix it? Thanks so much!!!

Reply

Share ›

Collin Baker

> Alyssa • 3 months ago

Ditto issue. I preemptively put them closer to the edge than mentioned which means all standard bottles now fit. doing it again I would definitely go with different bolts. To fix it you may have to try wood putty and redrilling smaller holes for smaller bolts. Or you could try to go fancy and get some type of artisan bolt/do-hicky that bows outward slightly so it would accommodate the fact that the bottles are round at their largest point. http://www.shanty-2-chic.com/2013/03/wine-rack.html

11 / 13

DIY Wine Rack

06/10/2013

Reply

Share ›

Avatar Melissa Kemp Smith • 7 months ago Hi. I just discovered your blog and I am so impressed and inspired. Such beautiful things you create! wine rack as my first woodworking project. But, can you tell m how you attachd it to the wall?

2x6 into the stud? What size of screw would you use to attach it to a stud? Thank you so much! -Melissa Reply

Share ›

Avatar Tonya Lynn • 7 months ago OMGOMG! My dad just got some saws today. He'll be happy to cut some wood for me. would be happy to, i'm sure. ;) :P Reply

Share ›

Avatar Jessica@fourgenerationsoneroof • 7 months ago This is a great idea and really cute! Nicely done :) Reply

Share ›

Avatar Beckie @Infarrantly Creative • 7 months ago Brilliant idea! I love those labels - cool! Thanks for sharing this project!

Reply

Share ›

Avatar Mindi • 7 months ago This is really a fabulous project I love how you used the hex screws! I don't drink wine, but I am sure I could use this cool design for something else...Great job ladies!

Reply

Share ›

Avatar Jessica Judyski • 7 months ago I LOVE this! I probably missed it before -- but do you have concrete floors?? They are amazing.

Reply

Share ›

Avatar Roxanne Reinhart • 7 months ago You did a great job. It looks so good on your wall with the crate and baskets below Reply

✉

Subscribe

d

Share ›

Add Disqus to your site

Archives

Categories

Select Month

Select Category

Search Search this website…

search

13

Copyright © 2013 · Genesis Framew ork · Designed and Customized by: EightCrazy Designs · Log in Find us on Facebook

Shanty2Chic Like

http://www.shanty-2-chic.com/2013/03/wine-rack.html

12 / 13

DIY Wine Rack

06/10/2013

< !-- END TAG --> < !-- END TAG -->

http://www.shanty-2-chic.com/2013/03/wine-rack.html

13 / 13