IN SEARCH OF QUALITY

Jobbers are raising concerns about the lack of quality parts being put on consumer vehicles

//By Adam Malik

In tough economic times, the consumer’s state of mind is understandable. Everything around them is going up in price, from food to clothing.

At the grocery store, prices were up 8.9 per cent year over year in March. While that’s down from the 10-plus per cent that was seen from September to January, wallets across the country continue to take a beating.

So when a consumer hears a squeak when they press the brake pedal, a knocking under the hood or any other uncomfortable sound, they clutch their wallet just a little bit tighter.

As other industry reports have shown, along with any given shop’s appointment calendar, people are willing to get their vehicles fixed. Whether it’s to ensure they can get to work, take the family on a weekend jaunt or the price of a new vehicle is just too expensive, consumers are looking for maintenance and service for their vehicle.

But there may be a catch. In the same way prices have gone up at the grocery store, the same has been seen in the automotive aftermarket. The DesRosiers Automotive Consultants Aftermarket Scorecard showed passenger vehicle parts, accessories and supplies prices were up 8.6 per cent in 2022 compared to 2021. Maintenance and repair service costs rose 5.6 per cent in that same time.

So just as they may look for the lower cost option in the cereal aisle, consumers may look to find ways to save money when getting their vehicle fixed and lean on their shop to get them the cheapest brake pad, belt or alternator they can find.

But the way jobbers see it, agreeing to sell cheaper parts is the biggest mistake shops are making with 41 per cent saying so, according to the CARS Annual Jobber Survey. And it’s a growing

Want more insights?

Scan the QR code to listen to the CARS Magazine Enhanced Media segment.

problem. Last year, that number was at 31 per cent. So it remains the top issue — but it’s an even bigger one today, according to the jobbers we heard from.

“Think they are doing their customer a favour” but really are not, pointed out one respondent when given the opportunity to comment in the survey.

Another called for better education of the consumer. Shops “feel that price is everything to the customer when, in most cases, if you properly ‘sell’ the better quality part, they will understand the value and why it is more money,” they wrote.

It’s not just the fact that a lower-quality part is being sold and will fail quicker, the shop’s bottom line won’t be healthy, said another. “In a competitive trade, including DIY, they want to offer a lower price. However, they are cutting down their profit margin and quality.”

The CARS Annual Jobber Survey went out to jobbers to gauge their views on how shops are running their businesses, the relationship between the two sides, industry trends and how to better work together. The survey was sent out via newsletter, e-blast and social media.

Business acumen

The second pick for the most common mistake shops make was the lack of proper business management procedures (24 per cent).

Jobbers are concerned that their automotive service professional customers aren’t preparing themselves adequately for the rigours of running a business or getting the training needed to work on more technologically advanced vehicles.

WE ASKED: WHAT PIECE OF ADVICE WOULD YOU GIVE YOUR SHOP CUSTOMERS

THEY SAID:

GOING FORWARD?

Be patient and communicate with us to better the relationship. We must work as a team for both of us to prosper. Have more personal contact with customers when a vehicle is serviced.

I would say to spend a little more time preparing for future needs as opposed to reacting to what's already here. I would use hybrids and ADAS as examples.

Jobber has to make money also. We can't pay for all your mistakes.

Be willing to accept changes and invest in training.

Don’t hesitate to reach out for help.

Call us. We will get it done. Right. On time. And the best price available

One respondent simply stressed that they “Should take management courses.” Another complained that ignorance is getting in the way: “They just need to educate themselves.”

That segues to the second question of the survey: Do ASP shops take the need for management and technical training seriously enough? The answer, overwhelmingly, is no.

Nearly half of respondents (47 per cent) say they’re told by their ASP customers that they're too busy to go to classes. Another 35 per cent said they’re told by shops that they’ll attend but never do. That’s 82 per cent of jobbers saying their industry partners are not getting the training they need.

“They need to understand they need training,” lamented one comment.

That said, many respondents understand the reality of the situation. ASPs are working all day; they don’t want to give up their evenings or weekends for more work, even if it’s training. Shop owners don’t want to close their doors and lose a day’s business either.

“There is a variety of challenges here from being paid for training to locations and time of day,” a respondent noted.

“Finding time away from their daily work schedule to get to training — too tired at the end of the day to attend training,” pointed out another.

One looked inward. “Our sales reps must keep trying to advertise these programs,” they said, noting that banners are offering quality learning opportunities.

However, “the better the meal, the better attendance,” one person mentioned about training sessions.

What is the most common mistake you see your ASP customers make? Do

QUALITY THE PROS COUNT ON,

There are still challenges around getting proper training out there, a couple of respondents observed.

“We must commit to more training, especially in this rapidly changing environment with EVs and such,” one said.

“We, western Canada, need more handson training. A lot of shops say there doing online training. But nothing beats handson,” said another.

Parts quality

Shops have bemoaned the lack of quality parts available to them. Some are turning to the dealer more often than before to get what they need. Based on the responses by jobbers, they believe they have the quality shops want but price is an issue.

One jobber who said they continually remind suppliers to keep quality standards high noted that profit margins need to be maintained on their end. “We are keeping decent margins and using the profits to ensure we have better service and inventory levels than the dealers.”

Another noted that many brand-name parts meet or exceed the original equipment manufacturer’s quality. “We spend a lot of time educating shops about the benefits of our parts. A lot of cost comparisons to understand what is best for their business. We do stock a few white box parts but try to upsell to a better part,” they said.

Online ordering

Many shops have moved the bulk of their ordering online for reasons including ensuring they’re getting the exact part they want and not needing to speak with anyone. This, they say, quickens the process.

Jobbers are responding to make it easier for shops to do so.

At this time, upwards of 60 per cent of a jobber’s products are sold online — about 24 per cent said they were doing that much business in this area. Some see this as a growing area. While there are kinks to be worked out, the offering is part of a system to offer a fully-rounded service experience.

“Online levels have steadily increased over the last five years or so, and we are never completely satisfied with the process, but it is working well,” one jobber wrote. “We have our outside sales team doing weekly visits to ensure all is going well, pick up returns, warranties and show new products or programs.”

Brake Rotors and Drums

Brake Pads and Shoes

Brake Calipers

Hub Bearings

CV Axles

Chassis Parts

Complete Strut Assembly

Shock Absorbers

Strut mounts

Radiators

Water Pumps

Steering Pumps and Racks and Pinions

Steering Gears

Starters and Alternators

Batteries

Oil Pans

Fuel Pumps

Wiper Blades

Ignition Parts and Coils

Fuel lines

Exhaust Parts, Universal Converter, and Flex Pipes

Misc Automotive Parts

Hotspot Auto Parts

939 Warden Ave Scarborough ON M1L 4C5 Info@hotspotAutoparts.com | www.hotspotautoparts.com

An Automotive Warehouse Distributor

What has been your biggest challenge over the last year?