Electronic Products and Technology November 2010 by Annex Business Media

electronic products and technology - NOVEMBER-DECEMBER 2010 electronic products and technology

POWER SUPPLIES BATTERIES

POWER SUPPLIES POWER SUPPLIES

BATTERIES

POWER SUPPLIES BATTERIES

AN EP&T SPECIAL REPORT PAGE 8

DATA ACQUISITION & SENSORS Page 14 SEIKO INSTRUMENTS USA

CONTRACT MFG SERVICES & PRODUCTION EQUIPMENT Page 17 APS NOVASTAR

THERMAL MANAGEMENT & ENCLOSURES Page 20 HAMMOND MANUFACTURING

Publications Mail Agreement No. 40069240 Canada Post: Return undeliverable Canadian addresses to: Business Information Group, 12 Concorde Place, Suite 800, Toronto, ON M3C 4J2 circulation@ept.ca USPS 003-349

What’s New at Quoi de Neuf chez

omega.ca

Please Call to Receive Your FREE Dilbert CONTROLCAT New Horizons in Temperature, Pressure, Flow and More! TM

or Visit Our Web Site: omega.ca/literature

Veuillez nous Contacter pour Recevoir votre Copie GRATUITE Dilbert MC CONTROLCAT New Horizons MD de Température, Pression, Débit et Plus!

ou Visitez Notre Site Internet: omega.ca/literature

NEW! Nouveau!

FREE GRATUIT

pour les ventes et le service - composez

TOUT JUSTE SORTI DE LA PRESSE!

Plus de 150 pages couleurs de Produits à la Fine Pointe de la Technologie!

Automation and Control Calibrators: Temperature & Pressure Chart Recorders Data Acquisition Systems Data Loggers Flowmeters Heaters: Flexible, Immersion, & Strip Infrared Handheld Instruments Load Cells pH and Conductivity Instrumentation Pressure Transducers Photoelectric and Proximity Sensors RTD Probes and Thermometers Sanitary Temperature and Pressure Sensors, Transducers Signal Conditioners Strain Gages Thermocouples Terminal Blocks Transmitters USB Probes and DAS Systems Wind Tunnels Wireless Sensors and Meters

Automatisation et Contrôle Étalons: Température & Pression Enregistreurs à Chartes Systèmes d’Acquisition de Données Enregistreurs de Données Débitmètres Éléments Chauffants: Flexibles, Immersibles et à Bandes Thermomètres Infrarouges Portatifs Cellules de Charge Instrumentation de pH et de Conductivité Transmetteurs de Pression Senseurs Photoélectriques et de Proximité Sondes à RTD et Thermomètres Sondes et Transmetteurs Sanitaires de Température et de Pression Conditionneurs de Signaux Jauges de Contrainte Thermocouples Blocs de Terminaison Transmetteurs Sondes USB et Systèmes d’Acquisition de Données Souffleries Senseurs Sans Fil et Indicateurs

Includes 105 DILBERT Cartoons! 105 Bandes Dessinées DILBERT Incluses!

Shop Online at English Service Français

magasinez en ligne à

976 Bergar Laval, Québec Canada H7L 5A1

http://ept.hotims.com/28773-1

Dilbert © United Feature Syndicate, Inc.

PRESS!

Over 150 Full Color Pages of State-of-the Art Products!

Visit omega.ca/dilbert for your daily dose of DILBERT! Visitez omega.ca/dilbert pour votre dose quotidienne de DILBERT!

For Sales and Service, Call TOLL FREE

HOT OFF THE

e d i t o r i a l Automotive engineers converge in car Mecca

electronic products andtechnology technology electronic products and

Technology solutions and an elite line-up of speakers addressing ‘hot-button’ topics in automotive electronics was centre stage at the Convergence conference and exhibition held in Detroit this October. The event has earned worldwide recognition as the premier transportation electronics event attracting leading executives, engineers and technologists from around the globe. Among the highlights was a panel discussion on the mobility ecosystem, as consumers seek to match cars with their lifestyle. Among the key attributes: environmentally conscious, safe, connected and affordable. While pending rollout of LTE wireless networks stirs excitement and skepticism within the auto design sphere, the potential effects are staggering in telematics, infotainment and safety. At the forefront of operating systems and middleware for the automotive infotainment market, Ottawa-based QNX Software Systems Co., demonstrated its latest mobile connectivity technologies in a new concept car at the show. The specially modified Chevrolet Corvette showcased QNX’s vision for the fully connected automobile — encompassing connectivity to the cloud, to roadside systems and a host of mobile-device apps. A multimedia dashboard showed how in-car systems can access everything from maps to find specific things, geosocial applications for locating nearby friends and even locating the closest parking spot. A dynamically reconfigurable digital instrument cluster provides both a driving mode (tachometer and speedometer) and an information mode (weather, navigation information, album art). Ford demonstrated its leadership, taking a practical, consumer-driven approach to advancing the field of autonomous driving and is urging widespread collaboration with groups ranging from academia, government,

Volume 32 Number 8 November-December 2010

Stephen Law Editor 416.510.5208 slaw@ept.ca

David Boss, P.Eng. Contributing Editor

Joanna Malivoire

Peter Loney

Account Manager Direct: 866.868.7089 jmalivoire@ept.ca

Publisher 416.510.5207 pdloney@ept.ca

Stephen Law, Editor, slaw@ept.ca

suppliers and technology innovation companies, to the expert gamer and biologist schooled in chaos theory. “We have to take a holistic approach to autonomous driving, and that can only come with input from many different sources,” said Jeffrey Rupp, of Ford’s Active Safety research team. “Something as complex as a fully autonomous vehicle can only be achieved by taking careful evolutionary steps, rather than one revolutionary leap.” Ford has initiated the process, introducing collision avoidance technologies such as adaptive cruise control, lane departure warning and blind spot information system. A Career Fair was also held at the event, providing career development opportunities for mobility engineers and to assist academic, government, corporate recruiters and employers in finding highly qualified candidates. “Everybody is starting to hire like crazy right now,” said David Cole, chairman of the Michigan-based Center for Automotive Research. “Unfortunately, there are not enough people with the right skills.” Engineers with a background in mechatronics are in particularly high demand, according to trend forecasts. For example, Chrysler advertised opportunities in areas ranging from electrical and electronic systems integration to racing technology. David Cole, chairman of the Michigan-based Center for Automotive Research says the industry will “never” see another job climate like the one that existed in pre-recession halcyon days. But the demands of technological change are combining with the retirements of Baby Boomers to create a “huge transition” in the industry’s engineering ranks. One thing is for sure – continuing encroachment of electronics into the automobile surely keeps the innovation wheels in motion.

M12x1 Field Attachable Connectors with connecting area from 0.25mm2 – up to 0.75mm2

Tracy Lelyk

Art Director / Group Administrator 416.510.5120 tlelyk@ept.ca

Sensor Actor Line

Tracey Hanson

Production Manager 416.510.6762 thanson@bizinfogroup.ca

Bona Lao

Subscription Inquiries 416.442.5600 ext 3552 blao@bizinfogroup.ca

Circular Connectors

Phyllis Wright

Print Production Manager

Bruce Creighton President

Alex Papanou Vice President

EP&T (Electronic Products & Technology) is published nine times per year: Monthly in February, May, August, September, October, Bi-Monthly January/February, March/April, June/July, November/December by:

BIG Magazines LP, a div of Glacier BIG Holdings Company Ltd. 12 Concorde Place, Suite 800, Toronto ON M3C 4J2 info@ept.ca Website: www.ept.ca Tel: 416.442.5600 Fax: 416.510.5133 Sales: 416.510.5207 • Editorial 416.510.5208

Sensor Actor Line M8x1 Overmoulded Components and Sockets ISSN 0708-4366 (Print) • ISSN 1923-3701 (Online) Subscription Rates: Canada: $52 per year,

US: $78 per year, International: $125 per year Editorial Purpose: Electronic Products & Technology provides timely, comprehensive coverage of the latest worldwide developments and trends in electronic products, equipment and systems, and interprets their significance to manufacturers and end-users in the Canadian marketplace.

PAP Registration No. 11112 Publications Mail Agreement No. 40069240 Canada Post: Return undeliverable Canadian addresses to: EP&T Circulation Dept., 12 Concorde Place, Suite 800, Toronto, ON M3C 4J2, Subscription Inquiries: 416.442.5600 x3552 • circulation@ept.ca EP&T (Electronic Products & Technology) assumes no responsibility for the validity of claims in items reported.

Sensor Actor Line 7/8” Overmoulded and Field Attachable Components as well as Sockets

As a leading connector manufacturer CONEC develops, produces and markets competitive high quality connectors worldwide, suitable for high-end applications.

EP&T (Electronic Products & Technology) USPS 003-349 is published nine times per year (monthly in February, May, August, September, October and bi-monthly in January/February, March/April, June/July, November/December) by BIG Magazines LP, div of Glacier BIG Holdings Company Ltd. Periodicals Postage Rates paid at Niagara Falls, NY 14304. U.S. Office of publication: 2424 Niagara Falls Blvd., Niagara Falls, NY 14304-0357. U.S. Postmaster send address corrections to: EP&T Box 1118, Niagara Falls, NY 14304.

Quality oriented users in the Industrial Electronic, Automation and Communication Industry trust and value the quality products from CONEC.

© 2010 This publication or any part of it may not be reproduced, stored or transmitted in any form whatsoever without the express written consent of the publisher. From time to time we make our subscription list available to companies and organizations whose products and services we believe may be of interest to you. If you do not want your name to be made available, please contact EP&T with your subscription number.

We acknowledge the financial support of the Government of Canada through the Canada Periodical Fund (CPF) for our publishing activities.

Visit EP&T’s Website Your digital look inside the electronics industry

www.pmr-werbung.de 0210/10347

Printed in Canada

CONEC designs and manufactures products in modern facilities. The products are made in accordance to the highest quality standards and industry specifications. CONEC provides reliable and effective solutions to OEM, EMS and cable houses. Circular Connectors from CONEC: Quality keeps connected!

featuring: • daily news

• hot new products • electronic industry events • technical white papers • multimedia ...and more

electronic products andand technology electronic products technology

Canada’s Leading Electronics Website

http://www.ept.ca

CONEC Corporation 125 Sun Pac Blvd. • Brampton Ontario • Canada L6S 5Z6 Tel. +1 905 790 2200 • Fax +1 905 790 2201 E-Mail info@conec.com

www.conec.com http://ept.hotims.com/28773-2

Sensor Actor Line Bus Systems Overmoulded Components and Sockets for Profibus DP, Industrial Ethernet and DeviceNet

Sensor Actor Line Overmoulded Components, Sockets and Junction Boxes for Food+Beverage

representatives and ditributors

NEWSWATCH

N E W S WAT C H NEWSWATCH

Component benchmarking service for OEMs gauges price competitiveness An independent, web-based price benchmarking and risk assessment service for electronic components has been introduced by Lytica Inc., an Ottawa-based consultancy specializing in supply chain services. Heralded as the electronics industry’s “first and only” service of its kind, freebenchmarking.com lets companies quickly and confidentially compare their electronic components pricing against the firm’s proprietary database of current industry pricing, based on total component spending and spending by commodity. The project is the brainchild of Lytica president Ken Bradley, who worked with Nortel as a senior vice-president and chief procurement officer until 2002. “We’ve created this web service to be the go-to industry reference for component price “We’ve created this web service competitiveness and risk assessment. It will arm our clients with the information they to be the go-to industry reference need to negotiate more competitive pricing for component price competitiveness and reduce supply chain risk,” says Bradley. and risk assessment. Every client that confidentially submits its cost data receives, within a day, a detailed electronic report that not only assesses cost competitiveness (in terms of cost advantage or disadvantage to others) but also highlights areas of risk related to single-sourced and end-of-life components. freebenchmarking.com offers three levels of service. As its starting point, the ‘Silver Service’ provides a free pure benchmarking report, while the client’s component pricing is compared against freebenchmarking.com’s proprietary database of current industry pricing, based on total component spending. The report also contains valuable information on achieving potential cost savings from coding duplications, and addresses risks associated with single-sourced components. The fee-based Gold Service report builds on the Silver Service, adding valuable content the client can use to negotiate better component prices and reduce supply chain risk. The report includes a detailed analysis of client spend by commodity, with clearly identified opportunities for cost savings. Supply chain risk factor analysis is also included, identifying single-source and end-of-life risks before they become a liability. “When I oversaw the procurement of components on behalf of a $20B global company, I paid many times the cost of a freebenchmarking.com Gold report for assessments that were much less comprehensive or actionable,” he adds. The premium Platinum service provides customized cost savings and risk reduction programs based on clients’ individual needs. Lytica negotiates and implements savings on behalf of its clients, based on an innovative gain-share fee model. “It is important to highlight, that we are not component suppliers and that we have a stated policy of accepting no fees or commissions from suppliers based on the sale of components from a supplier to a Lytica,” Bradley states.

Electronic Hardware RAF is North America’s leading supplier of electronic hardware. RoHS compliance, custom capabilities, quick samples, in-house plating and the widest range of imperial and metric sizes make RAF an easy choice. IRWIN is proud to be RAF’s largest Canadian distributor.

electronic products and technology • november-december 2010

a Division of MW Industries, Inc.

Artaflex acquired by team of EMS industry veterans The acquisition of specialized EMS provider Artaflex Inc., Markham ON, has been completed recently to a group of industry veterans led by Paul Walker, the founder and former chief executive officer of SMTC. The terms and value of the deal were not disclosed. “The opportunity to acquire Artaflex with all its unique differentiators and to partner with Gerry Iuliano, the co-founder of Artaflex and Phil Woodard who was previously the COO at SMTC and who will take on a similar role at Artaflex, was just too great to pass up,” says Walker. Artaflex is an integrated product development, commercialization and manufacturing company providing services to OEMs requiring expertise in a high mix and high complexity manufacturing environment. With engineering, logistical and manufacturing capabilities, customers partner with Artaflex to produce quality products. In addition to assembling printed circuit boards (pcb), Artaflex provides a full suite of additional services such as: electronic circuit design, pcb layout, test, rework/repair and box build enabling customers to benefit from greater vertical integration in their supplier base. “After advising Artaflex for the past few months, and other companies over a number of years, it became more apparent then ever that the mid tier Canadian market is lacking a strong EMS provider with the product development, commercialization and manufacturing differentiators that Artaflex has to offer,” adds Walker. “When you combine this with all the industry consolidation opportunities in this same mid tier space, it’s just a very exciting time to acquire Artaflex and be focused on Canada.”

Ontario’s digital media hub aims to drive innovation A major digital media innovation centre ready to foster the next generation of digital media innovation in Ontario, officially opened for business in Waterloo ON. The Communitech Hub, which occupies 30,000 square-feet of a renovated downtown Kitchener Tannery building, is now home to start-up companies, small-medium enterprises and global multi-nationals all aiming to accelerate the pace of development of new ideas and products in the digital media sector. Leaders from business, government and community organizations recently gathered at The Communitech Hub to recognize the expansive effort that has now created a leading-edge facility customized to meet the needs of its occupants. “Ontario has a tremendous legacy of innovation in digital media and ICT, and this sector is exploding around the world. The Communitech Hub will help launch more madein-Ontario companies, create good jobs and better lives for families,” said Glen Murray, Minister of Research and Innovation. The ‘Hub’ will not only serve as a collaboration centre for resident companies, but will also link to other digital media centres across Canada as part of the Canadian Digital Media Network (CDMN).

Electro Sonic adds three to team Electro Sonic Inc., has made three strategic new personnel additions at its Torontobased headquarters. Paul Hur and Nuccia DiGiovanni have joined as OEM account manager for Manitoba/ Saskatchewan and sales representative for the Program Accounts Group respectively. In addition, Rocco Laricchia joins as technical marketing manager, with an initial focus on the solar energy industry. “Each with more than 20-years of experience, these individuals are reflective of our investment to deliver technology and supply chain solutions in an evolving market on both sides of the border,” says company president Eric Taylor. From left are: Paul Hur, OEM account manager for Manitoba and Saskatchewan; Peter Campbell, national marketing manager; Nuccia DiGiovanni, sales representative for program accounts group; Eric Taylor, president; and Rocco Laricchia, technical marketing manager.

Allied to distribute Pentair brands, Apem LEDs Allied Electronics Inc., Fort Worth TX, has signed a distribution agreement with Pentair Technical Products, a leading global provider of solutions for enclosing, protecting and cooling electrical and electronic systems. Allied will carry Pentair’s industry-leading brands – Hoffman, Schroff and McLean Cooling Technology. These brands provide a broad variety of standard, modified and custom solutions to the commercial, communications, energy, general electronics, industrial, infrastructure, medical, and security and defense markets. Allied also signed a distribution agreement with Apem Components Inc., Haverhill MA, to distribute its LED indicators and switch products, such as pushbutton, toggle and rocker switches, as well as panel mounting LED indicators. This month, Allied released its 2011 Catalog, which includes an additional 20,000 new products and enhanced product portfolios. In total, the catalog showcases more than 120,000 products from over 300 industry-leading suppliers. The ‘automation & control’ section was expanded and given new divisions to make it easier to find these products.

Spacers

Thumb Screws

Standoffs

Handles & Ferrules

Jack Screws

Circuit Board Supports

Captive Panel Screws

Male-Female Standoffs

Precision Shoulder Screws

Thread-Locking Products

Electronic Components & Hardware

800-263-3562 www.irwin-ind.com

>Connectors & Cables >Fans, Heat Sinks & Thermal Management >Mechanical Hardware & Enclosures >Optoelectronics & Displays >Power Products >Printers & Labelling >Protection, Suppression & Shielding >Switches & Relays >Wire Management

Richmond Hill, ON

Calgary, AB

Montreal, QC

http://ept.hotims.com/28773-3

Rochester, NY

Tektronix launches calibration & repair division Tektronix Inc., Beaverton OR, leading manufacturer of oscilloscopes, has formed a calibration and repair division - Tektronix Service Solutions, serving as a single-source solution for all makes and types of instruments spanning 130,000 different instruments from over 9,000 manufacturers. Companies seeking easier, more cost effective ways to meet their instrument maintenance and asset management requirements are increasingly turning to service and calibration providers with the scale and expertise to meet instrument care needs broadly, both in terms of instrument types and geographic coverage, according to Paul Caragher, president, Service Solutions, Tektronix. Tektronix Service Solutions combines the strength of Tektronix with the extensive service capabilities of recently acquired Davis Calibration and Sypris Test & Measurement. The resulting organization delivers industry-leading capabilities, capacity and scalability with more than 100 on-site, mobile and depot locations. The new organization is backed by Tektronix’ deep measurement industry expertise and commitment to quality. Canadian customers can access the T&M cal and repair services by calling 1-503-627-7111 (Option 4) or visit online at www.tektronix.com/service or http://service-solutions.tektronix.com/.

full online product listings at.ept.hotims.com

http://ept.hotims.com/28773-4

products on review

electronic products and technology • november-december 2010

Monolithic ceramic pressure sensors calibrated for medical apps

High efficiency WiMAX power amplifier comes in small QFN package

ME75X Ceramic Pressure Sensor series measures high pressures in medical environments. The monolithic piezoresistive ceramic devices are available in various gauge pressure ranges from 2 to 400 bar. An onboard ASIC provides an amplified and calibrated output. With a wide operating temperature range of -25C to +125C, three output options are available: 0.5-4.5V ratiometric, 4-20mA, or 0-10V non-ratiometric. When the temperature changes, the internal electronics provides an offset and span correction along with aging detection and compensation. With a diameter of 18mm, device provides high linearity and repeatability ranging from <0.2% to <1.5% depending on the pressure range with an overall accuracy of <1% full-scale. SERVOFLO

SE7271T single high-power amplifiers cover both 2.3-2.4GHz and 2.5-2.7GHz WiMAX bands. The highly integrated single-die device is fully matched with a step attenuator, power detector and harmonic filter all in a 3mm x 3mm x 0.6mm Quad Flat No Lead (QFN) package. The integrated impedance match combines with the product’s functionality to create a ‘plug-and-play’ solution. SIGE SEMICONDUCTOR

http://ept.hotims.com/28773-50

200Ma Schottky diodes available in SOT-963 configurations CMRSH-4DO Versatile Dual 40V, 200Ma Schottky diodes in the SOT-963 package provide a low VF of 0.35V and a switching speed of 5.0ns. Device can be arranged in a variety of configurations including common anode, common cathode or in series by using the suggested alternative mounting pad geometries. Two devices can also be configured for full wave bridge rectification. The SOT-963 package uses a board space area of 1.1 sq mm. CENTRAL SEMICONDUCTOR

http://ept.hotims.com/28773-53

Tough woven sleeving resists abrasion FIT Sleeving product family is comprised of rugged products that are designed for applications that demand superior abrasion resistance, high operating temperatures, and/or resistance to oils, solvents and chemicals. Product is available in a varied assortment of wrappable, expandable and non-expandable configurations and with accessories ranging from heat-shrink, rigid and flexible tubing to lacing cords and EMI shielding tape. ALPHA WIRE

http://ept.hotims.com/28773-54

http://ept.hotims.com/28773-51

High performance RF handheld vector network, spectrum analyzer tool adds versatility MS202xB/MS203xB VNA Master series highperforming handheld RF vector network analyzers (VNAs) provides frequency coverage from 500kHz to 4/6GHz and multi-instrument functionality in a rugged, lightweight design that withstands harsh environments. Unit finds faults, optimizes mission-critical systems and maintains more sites while reducing operating and capital equipment expenditures. Product provides field engineers with a S-parameter measurement tool for on-site installation and maintenance activities, with large 8.4” daylight viewable display. ANRITSU http://ept.hotims.com/28773-52

Tri-band antenna boosts long-distance communication DB1-LP Series of tri-band log periodic gain antenna provides long distance directional communication over a multitude of frequencies. Product provides gain and directivity comparable to a Yagi antenna, but in a much smaller form factor and over a wider range of frequencies. Made of UV stabilized materials, product is designed for long-term use in indoor or outdoor environments and includes complete mounting hardware for standard masts. ANTENNA FACTOR http://ept.hotims.com/28773-55

Light guides enable backlight touch display Global Lighting Technologies (GLT) ultra-thin light guides utilize firm’s LED-based edge-lighting technology to provide solution for backlighting touchenabled display graphics. Products provide bright, uniform light exactly where needed for directional symbols, on/off buttons, company logos, rotary switches, sliders and whatever other graphic icons need to be illuminated, from large to small. Device employs side-firing, high efficiency LEDs and focuses the light into a high-performance, ultra-thin light guide – 0.6 mm or less – utilizing light extraction technologies such as Microlens, which extracts light precisely where needed to provide bright, uniform light in a thinner form factor without hot spots or dark areas. CALBROOKE MARKETING http://ept.hotims.com/28773-56

High sensitivity telecoil connects hearing aid, mobile phone PREMO telecoil series ZTC0602 high reliability and sensitivity coil for hearing aid applications is developed according to the highest ISO quality standards. Device is specially Z-axis design for mobile phone to transmit audio signal from mobile to hearing aid device. Inductance (90-180uH) and Rdc value for device is between 4 and 32 ohms used for switching to T-coil function. Product’s surface mounting device (SMD) configuration allows an easy integration in an automatic printed circuit board assembly process. DB LECTRO

DPDT relay is 6Amps KSD 6 amp DPDT relay measures .68H X .65W X .87L. Device will switch 120Vac / 6A or 30Vdc / 6A and provides a maximum switching capacity of 600Va / 120W. The maximum carrying operating voltage is 250Vac and 125Vdc. Dielectric strength is 1500Vac, 50/60Hz for 1 minute between contact and coil. Rated service life is 10-million operations. HASCO

http://ept.hotims.com/28773-57

ProtoMat® Benchtop PCB Prototyping Machine What would your day look like tomorrow if you could cut yourself free from the board house and produce true, industrial quality PCBs right at your desk? LPKF’s ProtoMat benchtop prototyping systems are helping thousands of engineers around the world take their development time from days and weeks to minutes and hours. In today’s race to market, it’s like having a time machine.

“You can’t beat an LPKF system for prototyping. We do up to three iterations of a design within a day.”

www.lpkfusa.com/pcb 1-800-345-LPKF

Leonard Weber Agilent

http://ept.hotims.com/28773-58

Small, TUV-approved power distribution boxes serve PV industry SOLARLOK slim junction box measures 15.5mm by 52mm and distributes dc power to a solar panel in a convenient, compact design that provides the least amount of visibility on the back of a panel. The TUVapproved product meets stringent industry requirements and a 20-year product-life performance. Targeted applications include two-rail crystalline PV modules and two-rail thin-film PV modules, with a 12-Amp current rating for crystalline applications and a 3-Amp current rating for thin-film applications. TYCO ELECTRONICS

http://ept.hotims.com/28773-59

http://ept.hotims.com/28773-5

full online product listings at.ept.hotims.com

Accelerating Your Success.

™

Three Times the Power People. Products. Services. The powerful combination of Avnet and Bell Microproducts provides the expertise you need to accelerate your success. Our combined team gives you access to world-class resources. Bringing industry leading line cards together, we now deliver the most extensive inventory of brand name systems, embedded hardware, displays, storage and software. And, with our enhanced services you have access to Avnet’s leading ISO integration centers, financial solutions and supply chain strategies.

www.twitter.com/avnetdesignwire

http://ept.hotims.com/28773-6

electronic products and technology • november-december 2010

Power Supplies, Batteries

Custom power

without custom pain By Steve Willis, deputy UK managing director, XP Power Inc.

espite the best intentions at the outset of an electronic product’s design, it’s commonplace for the power supply specification to evolve during the process and to only be finalized later on. At this point, it’s not uncommon to realize that the remaining physical space cannot accommodate an industry standard power supply, or that such units cannot fulfill other technical requirements. Obsolescence also creates demand for non-standard power supplies. Power supplies may fail in equipment that is otherwise perfectly functional and economical refurbishment can only be undertaken if a replacement power unit can be found, or developed. In both of the above circumstances,

designing a fully customized power supply in house, or contracting the work to a third party are potential options. However, both routes present technology, cost and time-to-market risks. This is particularly true with grid connected power supplies that have to meet stringent safety and EMC standards in order for the end equipment to meet the requirements of regulatory authorities such as TUV and UL. The option to create a simple ac-dc input then populate a printed circuit board (pcb) with standard dc-dc modules, sometimes called ‘bricks’, may look straightforward. But even this apparently simple approach is fraught with challenges. Why else would brick manufacturers provide training courses to help designers define requirements, avoid

ElectroSonic_Hammond_EPT.pdf 10/15/2010 3:46:37 PM

Figure 1: Design and development process for a semi-custom power supply.

CMY

instability through source impedance control, minimize EMI, ensure effective decoupling, improve load regulation and develop effective parallel arrays? Overcoming these technical challenges takes knowledge, experience, and considerable design time.

A process for creating reliable customized power from standard products For a growing number of companies, the solution to creating customized power within acceptable time and cost limits is to take the semi-custom route. In other words, using standard building blocks as the basis for power supplies - that meet specific requirements with respect to form, fit and function. As mentioned earlier, doing this inhouse requires experience and resources. The electrical design must meet technical requirements in the most economically viable way. Electronic design automation tools are then needed for schematic capture and pcb layout, mechanical layouts need to be modeled in 3D and thermal imaging is required to identify potential hotspots. Access to safety and EMI test equipment and the knowledge of how to use it properly are essential. The process for designing a reliable semi-custom power supply needs to be the same as that for a standard unit. The typical process adopted by XP Power is shown in Figure 1. After receiving a definition of requirements, the company draws up a specification proposal and compliance matrix for its customer. These are reviewed and approved before a detailed project plan is

Figure 2: Four dc-dc converters, an acdc boost converter with active PFC and a dc-ac inverter make up this uniquely rugged power supply created around standard building blocks.

prepared. Design is always an iterative process, so a detailed ‘Query Log’ is maintained to provide a record of decisions taken along the way. Prototype testing is followed by provision of full design verification test results. These include results of temperature cycling and other accelerated aging tests, where appropriate. A detailed design review process is fully documented throughout the development of the product and a production test specification is agreed before it goes into full production. The end result is a customized product that has been created to the same rigorous standards as a standard power supply.

Typical customization options Customization can be as simple as changing connectors. This might involve just removing a vertical connector and replacing it with a horizontal one. Other simple modifications include customizing covers with different fixings or producing custom wiring looms to reduce assembly time for the end equipment. Some of the most common requirements for more comprehensive customization are: Additional input surge protection. This may be needed where the power supply is going to operate in a particularly demanding situation involving high-energy surges and voltage spikes. The customization may involve creating a surge suppression circuit on a printed circuit board upon which a standard ac-dc power supply is then mounted. Power factor correction. Some companies prefer to manage the dc-dc parts of power system design in-house, but do not have the expertise or resources to handle power factor correction (PFC). Standard PFC units may not be suitable, so a customized active or passive PFC module may be developed to fit the form and function needed. Creating a Eurocard form factor. Eurocards are widely used in embedded systems but the range of Eurocard power supplies is limited. Designing a Eurocard to take a non-Eurocard format power supply is a common requirement to give the system designer greater flexibility in the choice of power supply. Eliminating fans. In some applications, fan cooling is not a viable option. As the only moving electro-mechanical part within a power supply, a fan will always represent a weak point with respect to reliability. Furthermore, the need to clean air filters adds a maintenance task. Where equipment operates in remote environments and maintenance becomes expensive, or where particularly harsh operating conditions limit

Having trouble Electro Sonic finding the right Your First on Stop enclosure time? for Hammond's latest product Electro Sonic is release: your solution: • With the largest • Extensive stock available in Inventory; Canada; Order size Today •• Where is Receive Tomorrow never an issue; • With next day, on Contact us for time delivery. your Hammond Enclosure Contact us needs. for your Hammond Enclosure needs.

www.e-sonic.com | 1.800.56.SONIC http://ept.hotims.com/28773-7

full online product listings at ept.hotims.com

power supplies, batteries

electronic products and technology • november-december 2010

product life, it’s often possible to design a standard power supply into a convectioncooled package than can be bolted directly to the equipment enclosure. Integration of batteries and charging circuits. Some applications require integral battery back-up to protect against failure of the main input supply. Here, the power supply will include a charging circuit for the battery and automatic switching circuits, effectively turning a standard power supply into an uninterruptible power supply (UPS). Addition of control and monitoring circuits. Customized control and monitoring can be added to many power supplies and some vendors, including XP Power, have inhouse expertise in writing software for these functions. The addition of input and output ‘OK’ signals, temperature sensors and fan speed controllers are popular options.

Example – a customized power supply for a high reliability app

30W dc-dc converters target railway applications DCW 30R series rugged, railway quality dc-dc converter modules deliver 30W output power and meet all relevant railway standards including EN 50155, EN50121-3-2 conducted and radiated EMI, EN 55022 Class B, and EN 61000 immunity. Product provide nominal input voltage options of 24V, 48V, 72V, 96V or 110Vdc with wide input ranges (EN 50155). Standard outputs include 12V, 24V, 48V or 110V. Other input and output voltages are available on request. ABSOPULSE ELECTRONICS http://ept.hotims.com/28773-61

Ac-dc external adapters range from 10-60 Watts Value Line (VPU Series) of ac-dc external adapters meets all standard safety ratings as well as latest Energy Star Levels. Products provide 10 through 60 Watt output power and comes in a variety of form factors including desktop, wallmount and interchangeable ac plug models with outputs ranging from 5 to 48Vdc. ASTRODYNE

Power relays aid singlepole switching of loads PR60 and PR80 power relays are suitable for the commercial vehicle market. Model PR60 is a monostable relay containing one coil and one resting position. PR80 is a bistable relay containing two coils and two resting positions. It is switched ON through an impulse and remains in the ON position until it is switched off by an additional impulse. Both devices provide continuous loads up to 300A and current peaks up to 2400A. E-T-A CIRCUIT BREAKERS http://ept.hotims.com/28773-63

http://ept.hotims.com/28773-62

Figure 2 shows a customized power supply for a portable, secure, communications modem used in the field. It was developed around three standard, 150 Watt, dc-dc converters, type MTC150. XP Power added a discrete, 600W ac-dc boost converter with active power factor correction, two dc input conditioning modules, a further commercial dc-dc unit to create a 28V bus, and a 300W dc-ac inverter module. The resulting unit has a 28V battery input, a wide-range input of 10-36Vdc, and a universal 90 to 264Vac input. The outputs are 28Vdc, 12Vdc, and 110Vac. The power supply was designed in a lowprofile form factor with integral heat sink. This unit is a good example of a very heavily customized product with custom electrical and mechanical elements built around standard modules.

Avoiding problems with agency qualification Agency qualification (UL, TUV etc.) is required for most grid-connected power supplies. The cost and time taken to obtain qualification for end equipment is an important consideration so it’s vital that the risk of failure is minimized. Standard power supplies will have already gone through rigorous approvals processes but it is essential to ensure that customized units have been tested to the same standards. A supplier of customized power solutions must be able to provide test documentation that gives a high level of confidence with respect to agency requirements and customers should expect the same level of warranty on the customized power supplies as would be applicable to comparable standard products.

Time-to-market and economics The balance of quantity and complexity determines the economic viability of a semi-custom power supply design. Simple changes can be applied to relatively low cost products for quantities in the low hundreds. Large programs involving complex customization are only likely to be viable where the final value of business to the power supply manufacturer is in excess of $50,000. Full custom power supply design has a much higher economic entry point and few products will see the light of day in less than 6 months. In contrast, prototype semi-custom power supplies can typically be created in 6 to 12 weeks using field-proven, standard building blocks. For more information on customized power supplies from XP Power Inc., go to http://ept.hotims.com/28773-60

http://ept.hotims.com/28773-8

w w w. e p t . c a

power supplies, batteries

electronic products and technology • november-december 2010

Dc power supplies deliver wide current, voltage ranges PWS4000 Series programmable dc power supply and PWS2000 Series dc power supply smoothly integrates with firm’s other bench instruments. Product provides wide current and voltage ranges, plus up to 0.1mA and 1mV resolution and a numeric keypad for direct key-in entry and up to 40 user-defined setup memories, speeding voltage and current selection. Units provide up to 72V output voltage with .03% basic voltage accuracy and .05% basic current accuracy. Product provides up to 72V output voltage with .05% basic voltage accuracy and .2 percent basic current accuracy. TEKTRONIX http://ept.hotims.com/28773-64

Stand-alone brick filter complies to MIL-COTS standards

Quarter-brick isolated dc-dc converters deliver 300W

MIL-COTS VI Brick filter is available as a stand-alone filter or integrated with the PRM Regulator Module. The integrated filter is an efficient (~95%) non-isolated regulator capable of both boosting and bucking a wide-range input voltage (16.5 to 50Vdc) and delivers output power up to 120W. Product measures 2.19 x 1.91 x 0.37 inches and provides compliance to MIL-STD-1275A/B/D and MIL-STD704A-F for transients and MIL-STD-461E/F for EMI. VICOR

Model HPQ-12/25-D48 joins the HPQ range of high-power quarter-brick isolated dc-dc converters, a 300W model with 12V output. Product provides a 2:1 input range of 36 to 75V and output of 12V, plus output current of up to 25A in an industry standard quarter-brick package (2.3” x 1.45” x 0.44”). Unit also provides high efficiency of up to 94.5% and operates within the industrial temperature range of -40 to 85C. MURATA POWER SOLUTIONS

http://ept.hotims.com/28773-65

6100 5707

Power entry modules provide seal protection against particles and liquids

Liquid cooled 3-phase power supply delivers 19 Watts/in3 Model PM37223-10P liquid cooled 25 kW power supply in a 2U package yields a power density of 19 Watts/in3. The 3-phase unit operates from 0 to 50C with an input range of 365 to 528Vac. A variety of standard options are available such as fully floating output, over current, over voltage, over temperature protection, and several variations of voltage and current programming. PIONEER MAGNETICS http://ept.hotims.com/28773-69

http://ept.hotims.com/28773-66

dc power jack, plug locks on KLDX series locking type dc power jack is available as 2.0mm diameter and 2.5mm diameter. Both options are available with or without a center peg, while mating plugs for over molded cables are available. Devices provide a positive lock that cannot be easily disengaged. Device can function as a standard jack if used with non-locking plugs. KYCON http://ept.hotims.com/28773-67

Ac-dc switching power supply combines compact size, flexibility Arch Electronics AQF100O series ac-dc switching power supply is compact, easy to install and comes in an open frame in design. Packaged at 210 grams and 2x4” in dimension, device provides efficiency at 92% and an input voltage range of 90 to 264Vac, with single output voltages at 12V, 15V, 24V, and 48V. Unit is low noise, high in efficiency, energy saving, high performance and reliable. DB LECTRO http://ept.hotims.com/28773-68

www.schurterinc.com/new_pems Schurter has expanded its range of IP rated power entry modules to include series 6100 appliance inlet, offered with IP 54 protection to the equipment as well as the power input

PC clip fits 17-19mm lithium-Ion batteries Keystone Electronics low profile, thruhole PC battery clip for lithium-Ion size cells from 17-19mm diameters meets increasing demands for accommodating higher energy, lower weight, rechargeable batteries placed in mobile products. Product withstands the rigorous use associated with recharging cycles, in addition to shock and vibration and provides a 3-legged, THM design for extra strength and stability plus low profile placement. EMX ENTERPRISES http://ept.hotims.com/28773-70

Compact, low profile power inductor delivers dc bias characteristics BRL2515 (2.5 x 1.5mm, with a maximum height of 1.2mm) and BRFL2518 (2.5 x 1.8mm, with a maximum height of 1.0mm) wire-wound power inductors provide dc bias characteristics in a thinner, smaller size. Model BRL2515 provides a rated saturation current of 1000mA and inductance of 2.2µH, plus a dc resistance that ranges from 0.070Ω to 0.265Ω. Model BRFL2518 provides a DCR range of 0.09ohms to 0.33ohms, while both include a low ACR. Operating temperature is specified at a range of -25 to 105C. TAIYO YUDEN (USA) http://ept.hotims.com/28773-71

Series 5707 filtered power entry module with fuseholders provides IP 65 protection to the equipment, and now also offers optional IP 54 protection at the power input

Low input voltage mini POL converters enhance thermal performance

Inlets for both series are according to IEC/EN 60320, C14 Class I or C18 Class II.

Series 5707 features: - 1- or 2- pole fuseholders for 5 x 20 mm fuses - EMC filter with shield in standard and medical versions (M5 or M80), rated from 1 – 8 A at 250 VAC - Series 6100 appliance inlet rated 15 A / 250 VAC and 10 A /250 VAC - Both series are ENEC and cURus approved for use in equipment according to IEC/UL 60950 and IEC/UL 60601-1 - Available with UL/CSA Hospital Grade cord set Nema 5-15P and cord retaining device

FDK Corp. extends its DK Series with three new non-isolated, point-of-load (POL) dc-dc converters that operate from a 3.0Vdc to 5.5Vdc input bus. The small, low profile surface mount devices deliver up to 3, 4, and 6Amps of output current with efficiencies up to 94%. They provide a tightly regulated programmable output voltage in the range of 0.8Vdc to 3.465Vdc and deliver the full rated output current with no derating in ambient temperatures up to 85C under natural convection. SIGMA COMPONENTS http://ept.hotims.com/28773-72

http://ept.hotims.com/28773-9

http://ept.hotims.com/28773-10

full online product listings at ept.hotims.com

power supplies, batteries

electronic products and technology • november-december 2010

30 watt dc-dc converter boosts power density to15W/psi

Step-down switching voltage regulator boosts transient response

AM30E-Z series 30 watt dc-dc converters with (2:1) input range of 9~18Vdc,18~36Vdc and 36~75Vdc provide the flexibility required for applications with loosely regulated inputs or with battery powered applications. Device provides 15W/psi in a compact 2” x 1” package, saving up to 35% pcb space compared to competing products. Device provides input/output isolation of 1600Vdc to protect the load circuit from any transient voltage surges present at the input of the converter. AIMTEC

FAN5358 step-down switching voltage regulator delivers a fixed output from an input voltage supply of 2.7V to 5.5V. Using a proprietary architecture with synchronous rectification, the device is capable of delivering 500mA and maintaining a very high efficiency of over 80% at load currents as low as 1mA. FAIRCHILD SEMICONDUCTOR

http://ept.hotims.com/28773-73

http://ept.hotims.com/28773-74

Dual-phase DCM interleaved PFC controller IC reduces EMI noise SSC2101S dual-phase DCM interleaved PFC controller IC improves efficiency and reduces EMI noise and is suitable for use in active power factor correction (PFC) converters. Two boost regulators operating 180-degrees out of phase in Discontinuous Conduction Mode (DCM) enables all switching to be done at zero current. Zero current switching improves efficiency and reduces switching noise and stress on components over a wide range of input voltage and output loadings. ALLEGRO

Voltage regulator boosts current ripple-rejection S-1172 series CMOS voltage regulator provides high ripple-rejection, low dropout and high current output. Device provides built-in transistor with low on-resistance. The over-current protector prevents the load current from exceeding the capacitance of the output transistor while the thermal shutdown circuit prevents damage caused by heat. The rush current control circuit limits the excessive rush current during start-up. Various capacitors and small ceramic capacitors can be used for this IC more than for conventional regulator ICs that have CMOS technology. SEIKO INSTRUMENTS http://ept.hotims.com/28773-77

Power connector rated to 450amps PowerMod HP (high power) series connector family provides touch-safe female housings, cable strain relief and integral positive latches. The RoHS compliant device is rated up to 450 amps for appropriate applications at a 30C temperature rise. Using firm’s patented Sterling contact technology, device provides low electrical resistance, plus a minimum of 500 mating cycles and is rated for circuit interruption (true hotplug). Products are IP 20 rated (touch safe) for user safety. ANDERSON POWER

http://ept.hotims.com/28773-78

http://ept.hotims.com/28773-75

Ac-dc power supplies output 120W in compact 1U height MPU-120 series compact, 120W, ac-dc power supplies provides 120W of output power in a compact 1U height U-Chassis case. With 18 CFM, these ac-dc switchers provide up to 180W of output power. Five standard models operate from a universal input of 90 to 264Vac, providing tightly regulated single outputs of 5, 12, 15, 24, or 48Vdc. Standard features include active power factor correction to EN61000-3-2, filtering to EN55022 Class B, input/output isolation of 3,000 Vac, and a low safety ground leakage current. All models are protected for over load, over voltage, and short circuit faults. EMX MICROPOWER MEGA+PN54 11-10 DIRECT 10/14/10 2:21 PM Page 1

150W, encapsulated, dc-dc converter suits railway environments RWY 150 series rugged, railway quality dc-dc converter utilizes high efficiency power conversion topology to deliver 150W output power. Product complies with the standards defined in EN 50155 for electronic equipment used on railway rolling stock and is therefore suitable for a wide range of on-board and trackside applications. Device operates within a -40C to +70C cold plate temperature range at full specification. Full encapsulation in a thermally conductive MIL-grade silicon rubber compound. Unit measures 58 x 54 x 181 mm and weighs approximately 800g. ABSOPULSE ELECTRONICS http://ept.hotims.com/28773-79

http://ept.hotims.com/28773-76

MTU1

1 Watt isolated DC/DC converter MTU1S 0505C XYYWW

Actual size

Innovation

We’re changing the shape of DC/DC power modules

Cat. NO. 54

• Ideal for rechargeable batteries 17-19mm Dia. • Accommodates: A, 2/3A, 17335, 17450, 17500, 17650, 18500, 18650 cells • Withstands multiple charging cycles • Low profile • Low contact resistance • Unique 3 legged THM design for enhanced strength & stability • Applications include: Mobile, Consumer, Industrial & Telecomm electronic devices RoHS Compliant

~ ISO 9001 Certified

ELECTRONICS

 Footprint reduced by 50%  56% less power dissipation  Lower running temperatures  Load regulation from 3.2%

Part Number

Vin

Vout

MTU1S0505MC

200

7.3

MTU1S0509MC

111

6.1

MTU1S0512MC

5.6

MTU1S0515MC

5.3

MTU1S1205MC

200

5.8

MTU1S1209MC

111

3.9

MTU1S1212MC

3.5

MTU1S1215MC

3.2

C O R P.

(718) 956-8900 • e-mail: kec@keyelco.com • FAX (718) 956-9040

(800) 221-5510 • Website: keyelco.com

murata-ps.com

Available from our global distributor network

http://ept.hotims.com/28773-11

w w w. e p t . c a

Iout Load Regulation

http://ept.hotims.com/28773-12

products on review

electronic products and technology • november-december 2010

DCS marshalling terminal blocks simplify wiring process

Interconnects boosts RF-level performance IsoRate High Performance Isolated Transmission line Interconnects for board level and cable-to-board applications achieve mid-range RF-level performance at approximately 50% of the cost. Line Jacks and Plugs (IJ5 & IP5 Series) are available in a 50-ohm system on 4mm centerline. The board-toboard system provides 70dB isolation at 7.6Ghz. Products are available in single or double row with 1, 2, 4, 6 or 8 rugged Edge Rate contacts per row. Guide posts for blind mating applications are also available. A 75-ohm system (IJ7 & IP7 Series) is currently in design. SAMTEC

WMF 2.5 (Weidmuller Multi Function) terminal block series simplifies wiring, reduces required cabinet space, increases functionality and expands wire routing and signal distribution capabilities. Even with the existence of alternative technologies such as remote I/O and Field bus, devices play a crucial role in DCS marshalling applications. Device provides feed-through, fusing and quick disconnects in a single profile, including a width of 5mm. Product incorporates advances such as an integrated shield or ground (PE) connection, and three separate jumpering channels. WEIDMULLER

http://ept.hotims.com/28773-80

http://ept.hotims.com/28773-84

Industrial, COTS power supply delivers set and safety-agency approvals

Spring-loaded connectors come in single, double-row strip packaging High density, .050” pitch through-hole and surface mount spring-loaded connectors (SLC) are available in single and double-row strip packaging. Each precision-machined spring pin component is plated 20µ” hard gold and assembled in a high temperature thermoplastic insulator suitable for wave and reflow soldering processes. Series 854-22-0XX-10-001101 and 855-22-0XX-10-001101 through-hole insulators provide molded standoffs to improve soldering and cleaning beneath the connector. Tail diameters of .016” require minimal diameter plated holes for connector mounting, maximizing signal routing between pins. Series 854-22-0XX-30-001101 and 855-22-0XX30-001101 surface mount spring connectors are low profile, standing less than .230” tall when engaged mid-stroke (.0275”.) MILL-MAX http://ept.hotims.com/28773-81

LZSA1500-4 48V at 1500W industrial power supply joins LZSA series and provides set and safety-agency approvals not commonly found in standard off-the-shelf units. Product provides a wide operating temperature range, compliance with MIL-STD-810E standards for shock and vibration and the ability to operate in explosive gas atmospheres. Units come with a nominal output of 12V at 1000W, 24V at 500W, 1000W or 1500W, and now 48V at 1500W. Units provide wide useradjustment ranges of 10 to 15.75-volts, 18 to 29.4-volts and 36 to 56-volts respectively. TDK-LAMBDA http://ept.hotims.com/28773-85

Metal pushbutton switch adds color housing option, eases customization process Color anodized aluminum housing is added to line of metal pushbutton switches. The red and green housings can be used to distinguish the start/stop switching functions. Device’s robust vandal proof switch has an IK07 protection class for high impact and IP67 ingress protection against water and dust. Product’s low profile flat front construction guards against side impact. The actuator is made of durable stainless steel. The standard versions of the new MSM color housing are offered in 19 and 22mm mounting diameters with electrical rating of 5A @ 250 VAC. SCHURTER

Electromagnetic flowmeters measure conductive liquids FMG600 Series electromagnetic flow meters are suitable for measurement of conductive liquids and have no moving parts and a PTFE lining. Product handles applications involving wastewater, pulp, food and slurries. Standard outputs include analog, frequency and RS485 communications. Optional sanitary tri-clamp mounting allows use of device in applications not previously open to magmeters. OMEGA http://ept.hotims.com/28773-82

http://ept.hotims.com/28773-86

Flow sensor serves high velocity apps

Panel feedthrough is block rated to 600V

D6F-W10A1 10 m/s Air Velocity Sensor incorporates firm’s MEMS Mass Flow Chip and patented Dust Segregation System flow path designs. Device provides an amplified, temperature compensated analog output signal to simplify the integration process by minimizing additional circuitry requirements. TRIM 7.0” OMRON ELECTRONIC COMPONENTS

828 series feedthrough terminal block is UL Certified for 600V/40A, enabling it to provide tool and maintenance-free, through-panel terminations. Device aids the separation of field-wired power input connections from sensitive electronics by simplifying the passing of conductors through enclosure walls. This creates ‘sub-panels’ where power input connections can be made outside the protected area of enclosures For nearly 50 years customers have been coming or control panels. Device utilizies Cage to OTTO for precision switches and operator Clamp spring pressure connection technology. To terminate: lift the lever, insert controls they can depend on to perform in a stripped conductor (16-6 AWG) into the extreme environments. A Hall Effect technology termination port and lower the lever. specialist known worldwide for durable and WAGO

http://ept.hotims.com/28773-83

m dy. Rea nce.co . t s lle bu

xce ttoe o EW Re eN t th i s i V ed.

ign des

innovative solutions, OTTO’s distinctive switch styles deliver unsurpassed performance in demanding situations. With OTTO’s quality control and customer support, you can go farther and do more:

• Grip, armrest and panel mountings • 8 output options, up to 3 million cycle life • IP68S sealing, outstanding EMI/RFI immunity • RoHS & WEEE compliant

Enhance your performance. Visit www.ottoexcellence.com. To contact an OTTO representative call 847-428-7171.

Hybrid crystal resonator outperforms quartz XRCGB-M series consumer hybrid crystal family improves accuracy of less than ±100ppm. Device incorporates a quartz crystal element manufactured by Tokyo Denpa and includes Murata’s proprietary package and production technology. These features enable a device smaller and lower in cost than a quartz crystal, while maintaining the precision of quartz. Further, these benefits enable improved shock resistance and drive level handling over other crystals making them ideal for wired Ethernet, HDMI, SATA, USB 3.0 and PCI-e applications. MURATA ELECTRONICS TRIM 4.875”

• Contactless Hall Effect technology

http://ept.hotims.com/28773-87

http://ept.hotims.com/28773-88

Manufacturer of operator control solutions for commercial, industrial and military applications. http://ept.hotims.com/28773-13

full online product listings at.ept.hotims.com

The Power’s Within.

More power to you. Newark stocks all the products you need to keep your designs, equipment and facility protected and powered. All the top brands too: SolaHD, TDK-Lambda, Elpac Power Systems, Emerson Network Power, Tripp-Lite,

Murata Power Solutions, Tyco Electronics and many more. So you’ll find just what you need for your design, industrial or aftermarket application, ready to ship today. Learn more at www.newark.ca or contact us at 800.463.9275.

DESIGN WITH THE BEST http://ept.hotims.com/28773-14

electronic products and technology • november-december 2010

Data Acquisition & Sensors High-speed data acquisition system records with 96 channels

Handheld meters serve as thermocouple, RTD or combined input data logging thermometers

TMX high speed data acquisition system provides best in class efficiency for general purpose data capture, review, archive and analysis. Unit provides 96 channels of data recording to a 1 TByte hard drive dedicated solely to data capture, allowing for data to be recorded for months on end in one single file. Unit provides firm’s LookBack and QuickReview technologies, while enabling instant review of several GBytes of data during ongoing long-term data capture. ASTRO-MED

HH100 line of handheld meters are high accuracy thermocouple, RTD or combined input data logging thermometers that provide three display locations on a large, easy-toread LCD. Units display the temperatures and differences of the two inputs as well as the specific function when in use. The front of the device provides MAX/ MIN/ AVG/ REL/ HOLD functions. Device logs data in real time PC monitoring and each channel is capable of storing up to 9999 data records per channel in the data logging mode. Product has a protective rubber boot over the device and PC software. OMEGA

http://ept.hotims.com/28773-90

USB input tool collects data direct to computer USB Input Tool Direct connects a measuring instrument with digimatic output to a USB port on a computer. The value displayed on the measuring instrument can be sent to the computer just by pressing the data switch. Product has been streamlined into a range of dedicated models for each type of measuring instrument as each unit has a unique plug to fit the tool it is designed for. Data can be loaded directly into an Excel spreadsheet. MITUTOYO CANADA

Let Tri-M your

http://ept.hotims.com/28773-89

http://ept.hotims.com/28773-93

16-/8-Channel PXI data acquisition modules sample simultaneously PXI-2022 and 2020 high-density simultaneous sampling PXI DAQ boards provide 16-bit simultaneous sampling of devices at sample rates of 250kS/s per channel across 16 and eight channels, respectively. Both units save space and reduce cost of developing PXI systems with multiple simultaneous DAQ modules. Products provide flexible input ranges from ±1.25V to ±10V. ADLINK TECHNOLOGY http://ept.hotims.com/28773-94

mobile system

Flexible pipe eases shipping, installation options

HE104-75W

75 Watt High Eﬃciency PC/104 Power Supply

• • • •

+5V, +12V and -12V outputs 6VDC to 40VDC input range PC/104 compliant Ex tended temperature: -40o C to +85o C

RF telemetry system profiles temperature TM21 Radio Telemetry System for Temperature Profiling supports multiple loggers for data transmission in real time. As the system travels through the process (oven, furnace or kiln), temperature data can be viewed, analyzed and reported instantaneously. System alters traditional processes of monitoring and can be applied in numerous applications and industries. DATAPAQ http://ept.hotims.com/28773-91

HE104+DX

108 Watt PC/104plus Power Supply

• • • • •

+3.3V, +5V, +12V & -12V DC output 6VDC to 40VDC input range H igh eﬃcienc y up to 95% PC/104 compliant Ex tended temperature: -40o C to +85o C

• • • • • •

160 Watt UPS High Power PC/104 Power Supply with Smart Charging

5V (25amp), 12V (5amp), V5SBY (7amp) output 6V to 40V DC input range Charging voltage: 10V - 35V Both PC/104 and RS232 inter faces UPS operation with batter y pack H igh power smar t multistage charging ENGINEERED SOLUTIONS FOR EMBEDDED APPLICATIONS

ORDER TODAY: 1.800.665.5600

http://ept.hotims.com/28773-95

Data acquisition module delivers on high-speed, PXI bridge-based measurements NI PXIe-4331 joins firm’s SC Express family of highperformance data acquisition (DAQ) modules with built-in signal conditioning. Device is a simultaneous high-speed bridge input module that provides signal conditioning for dynamic measurements from strain, pressure, torque and load sensors. Product increases the speed of bridge-based measurements and, with PXI Express, provides 250MB/s of dedicated bandwidth per device to give engineers the freedom to increase channel count without compromising sampling rates or data throughput. Product provides eight channels with 24-bit analog-to-digital converters (ADCs) per channel and 102.4kS/s per channel sampling rate. NATIONAL INSTRUMENTS

http://ept.hotims.com/28773-96

Data acquisition system is powered by piezoelectric force

HPSC104-SER

Temposonics Model RF position sensor in flexible pipe version facilitates installation in tight spaces with lengthy measuring ranges up to 20-meters. The non-contact device can operate in a curved position to detect curvilinear measurements at a minimum radius of 200mm. Device provides a 0.0025mm repeatability and a linearity deviation of < ± 0.02 % F.S. MTS SENSORS DIVISION

Type 5697-DAQ force measurement data acquisition system is a piezoelectric force system controlled by firm’s proprietary Type 2825A DynoWare software. System captures and analyzes data in applications such as cutting forces, general R&D and test laboratory environments in which single or multi-component force sensors and dynamometers are in use. Product incorporates a 16-bit analog-to-digital converter and a trigger function. It can acquire and evaluate up to 28 channels at a high sampling frequency rate (125kS/s per channel with eight channels) with excellent resolution. KISTLER INSTRUMENT CORP.

Vector signal analysis software performs next generation modulation analysis 89600 Vector Signal Analysis (VSA) software performs signal and modulation analysis with a window into what’s happening inside complex wireless devices. With views of virtually every facet of a signal, the tool lets users see what’s behind signal interactions, simplifying and speeding repair time. Product measures more than 70 signal standards and modulation types covering a range of applications. Software runs on a PC or inside PC-based instruments. AGILENT TECHNOLOGIES http://ept.hotims.com/28773-97

http://ept.hotims.com/28773-92

http://ept.hotims.com/28773-15

full online product listings at ept.hotims.com

data acquisition & sensors

electronic products and technology • november-december 2010

Thermometer data logger records with 4 channels in any combination

Sensor IC measures temperature without external components

PT-104 USB/Ethernet data logger can record 4 channels of temperature, voltage and resistance in any combination. It is compatible with firm’s standard PT100 and PT1000 platinum resistance thermometers (PRTs) including 2-wire, 3-wire and 4-wire types. By using calibrated reference resistors instead of semiconductor voltage references in its measuring circuits, the device is less susceptible to temperature drift and delivers high stability and accuracy. Product’s temperature measuring range is -200 to +800C, with an accuracy of 0.01 degrees and a resolution of 0.001 degrees. PICO TECHNOLOGY

S-5851A series 2-wire serial I/O digital temperature sensor IC measures temperature with resolution of 0.0625C without the need for external components. Device integrates a temperature sensor, reference voltage generation circuit, a ∆∑ type A/D converter and interface bus. Package options are the SOT-23-6 and SNT-6A. Product is suitable for wide-ranging temperature measurements in various applications. SEIKO INSTRUMENTS USA

Network forensics tools enhance performance analysis

Compact mini-logger family acquires OBD, CAN bus data

Network Time Machine hardware platform is a high-performance network forensics recorder for back-in-time analysis. Product allows users to diagnose performance problems across all applications. Product’s data recorder stores data for days, weeks or months depending on traffic load. It allows users to review and extract information quickly to analyze past events and the traffic leading up to, or causing, specific problems. Product focuses its analysis at the application layer, with built-in tools that simplify and speed root cause analysis through an intuitive interface. FLUKE NETWORKS

DAWN Mini Logger family consists of compact, low-cost, data loggers to acquire OBD & CAN bus data from cars and trucks. GPS data is an option. Another logger acquires a variety of inputs if users need to add their own sensors. Product’s small size eases installation for in-vehicle testing and other field testing applications. Connectivity options include USB, Wi-Fi, cellular and Bluetooth. Units work by themselves or together. HEM DATA

http://ept.hotims.com/28773-101

http://ept.hotims.com/28773-98

http://ept.hotims.com/28773-102

http://ept.hotims.com/28773-99

Digital humidity element boosts accuracy, delivers Low Hysteresis HYT271 digital humidity element is a capacitive polymer sensor has an I2C interface and uses an optimized thin film sensor connected to an ASIC, both on the same substrate. With a humidity measurement range from 0-100% rH, the device provides a low hysteresis of less than ±1% rH with an overall measurement accuracy of ±2.8% rH for the HYT271-S model. The linearity is less than 1% rH while the resolution is 0.02% rH. A temperature measurement is also included from -40 to +125C with an accuracy of 0.3C and resolution of 0.015C. SERVOFLO http://ept.hotims.com/28773-100

new literature LTE MICROSITE LTE (Long Term Evolution) and LTE Testing micro-Website is designed for Next Generation Networking (NGN). It takes advantage of NGN capabilities to provide an always-on mobile data experience comparable to wired networks. ANRITSU http://ept.hotims.com/28773-103

DATA LOGGING EQUIPMENT Catalog covers data logger and remote monitoring equipment, including some that measure temperature, humidity, voltage, current among other parameters.

One great instrument deserves another. And another. And another… The legendary performance and ease-of-use you expect from our oscilloscopes are now available for your entire bench. Introducing the first fully integrated set of Oscilloscopes ° 2 or 4 analog channels ° Up to 25 automated measurements ° Battery operation available

test bench instruments from Tektronix designed to streamline testing and offer unparalleled connectivity, accuracy and usability. From shortcut keys for common functions to USB ports for quick

Mixed Signal Oscilloscopes ° Up to 4 analog and 16 digital channels ° Parallel and serial bus automated analysis ® ° Wave Inspector for fast navigation of data

data export, every Tektronix instrument is built to maximize

Arbitrary/Function Generators ° 1 or 2 channels ° 12 standard waveforms ° Arbitrary waveform capability

so you can automate measurements, analyze data across multiple

measurements and minimize inefficiency. Plus, all bench instruments come with National Instrument’s LabVIEW SignalExpress™ software, instruments and control your entire bench from your PC.* Performance, usability and connectivity. Now available for your entire test bench.

Digital Multimeters ° Up to 11 automated measurements ° Statistics, histogram and trending analysis modes Power Supplies ° Programmable ° Automated sweeping ° Remote sense Frequency Counter/Timers ° Up to 14 automated measurements ° Statistics, histogram and trending analysis modes

CAS DATALOGGERS http://ept.hotims.com/28773-104

WHTE PAPER White paper discusses a typical application for ProWeatherStation product in a farm environment, used to monitor outside weather as well as temperature and humidity. TYCON POWER SYSTEMS http://ept.hotims.com/28773-105

DAQ WHITE PAPER Part Two of a three-part series of white papers called, ‘Everything You Ever Wanted to Know about Data Acquisition’, introduces and explains some of the less common or second tier I/O DAQ hardware. UNITED ELECTRONIC INDUSTRIES http://ept.hotims.com/28773-106

SHORT FORM CATALOG Short Form Catalog has been updated, covering broad product offerings of Piezo alerts, sirens, audio indicators, speakers, receivers and microphones. The New Product Section includes products that reflect firm’s effort to broaden its offerings into other markets. TRANSDUCERS USA http://ept.hotims.com/28773-107

w w w. e p t . c a

Take the new bench for a virtual spin at Tektronix.com/NewBench.

*Visit www.tektronix.com/signalexpress for a full listing of supported instruments. © 2010 Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. TEKTRONIX and the Tektronix logo are registered trademarks of Tektronix Inc. LabVIEW SignalExpress is a trademark of National Instruments.

http://ept.hotims.com/28773-16

products on review

electronic products and technology • november-december 2010

Anaerobic threadlocker dispenses in convenient tape form Loctite QuickTape 249 anaerobic threadlocker tape is dry to the touch and packaged in a convenient 260-inch roll. Product is mediumstrength and provides the same performance of liquid threadlockers. It can be carried in a pocket or toolbox and can be pre-applied to fasteners for future assembly. Neat, clean and mess-free, product is applied just like any other tape product. The user simply peels the low-tack tape from the spool and wraps it around the fastener’s threads. HENKEL CANADA http://ept.hotims.com/28773-108

DIN rail mounting options for 1- and 3- phase EMC filters DIN Rail mounting option for 1- and 3-Phase filters are compact and suited for use on TS35 (EN60715) DIN rails in solar inverters, industrial equipment and control systems. Product’s fixture and fitting concept facilitates simple and time saving snap-in of the firm’s FMAB Rail, FMBB Rail, FMAD Rail and FMAD Rail filters. The 1-Phase filter Series FMAB Rail has rated currents ranging from 10 - 20A and the 1-Phase, 2-Stage FMBB Rail has a current range of 1 - 10A. SCHURTER http://ept.hotims.com/28773-113

Miniature Hall Effect joystick endures robust environment

50V tantalum polymer capacitor aids dc-dc converter applications

JHT-00004 Hall Effect joysticks are compact, with a behind panel depth of .75 inches, and robust construction. Utilizing Hall Effect contactless technology, device has been tested to 1-million cycles with no degradation of electrical performance or boot wear. The electronics are sealed to IP68S and the EMI/RFI withstand are per SAE J1113 specifications. OTTO

TCJ SMD polymer tantalum capacitor series includes 1µF/50V and 10µF/35V devices, suitable for continuous operation with 20% voltage derating. Product’s 50V range extension meets the demands of dc-dc converter applications and are more stable with ambient temperature and applied voltage when compared to multilayer ceramic capacitors (MLCCs). Devices withstand high ripple currents and providing low ESR values. AVX

http://ept.hotims.com/28773-109

http://ept.hotims.com/28773-114

Baseplate-cooled 500W ac-dc power supply is fanless

Handheld spectrum analyzer eases infield measurements

CPFE500F range of baseplate-cooled ac-dc power supply provides 500-watts without the need for fan cooling. Unit provides extended temperature range of from -40 to +85C and is provided with a pc board protective coating to guard against moisture, dust and other contaminants. Product is suited to low-audible-noise applications such as audio mixing consoles and recording studios. TDK-LAMBDA AMERICAS http://ept.hotims.com/28773-110

Latching metal nano connector mates quickly Latching-Bi-Lobe Nano-D shaped metal connector assembly with multiple pins and sockets is set on 25 mil. (.635mm) pitch and matches the performance in military specification MIL-DTL-32139. Device’s positive latching process quickly mates and de-mates when needed for quick change-over of instrumentation. Mating strength has been tested and certified to exceed the tests specified for QPL tested Nano-D connectors. OMNETICS CONNECTOR http://ept.hotims.com/28773-111

Machine vision cameras withstand industrial use PL-C series of machine vision industrial cameras are smaller, more robust for the machine vision and microscopy markets. Product uses two camera electronics boards, 33% less hardware than existing units and are 38 to 45% smaller in size. Their small size allows for easy integration into custom industrial applications in which a robust, high quality camera is required. Units use a Firewire 1394b interface, provide DCAM v1.32 support and are available in color and monochrome versions and offer 5.0 Megapixel resolution. PIXELINK http://ept.hotims.com/28773-112

N9342C handheld spectrum analyzer (HSA) makes field testing easier by providing faster, more precise measurements, ease of use, and a range of user customization and ergonomic features. Device provides fast and accurate measurement of RF and microwave equipment and RF environments from 100kHz to 7GHz, tunable to 9kHz. The rugged, fanless unit provides a set of standard, one-button measurements including ACP, OBW and channel power, helping characterize signal quality. An optimized keypad allows access to most measurement functions within just two button pushes. AGILENT TECHNOLOGIES http://ept.hotims.com/28773-115

Handheld vector network, spectrum analyzer covers frequencies to 20GHz MS202xC/ MS203xC VNA Master series of handheld vector network analyzers (VNAs) provide the performance and capabilities of numerous benchtop instruments in a single highly-portable analyzer. Unit provides frequency range of 5 kHz to up to 20GHz in a handheld VNA, fast sweep times, waveguide support and advanced time domain capabilities. Instruments replace bulky, ac-powered and expensive benchtop products so field personnel can increase productivity. ANRITSU http://ept.hotims.com/28773-116

EMI/RFI Shielding Solutions Work directly with the leading U.S. manufacturer of EMI shielding. Tech-Etch offers a complete line of standard and custom products. Fast Delivery Tech-Etch maintains a large inventory of standard ﬁngerstock shielding for immediate delivery. In addition, an extensive free sample program enables functional testing of the part speciﬁed. Samples typically ship in a few days.

BeCu Fingerstock Gaskets are offered to close gaps as narrow as .010". Tech-Etch manufactures over 120 standard profiles for immediate delivery.

Expert Customer Service Experienced Customer Service Representatives provide fast computerized quotations. Product Engineers are always available to assist in product selection or answer shielding questions.

RoHS compliant Metalized Fabric Gaskets provide excellent shielding with very low compression forces and less than 3% compression set.

Download New Interactive PDF EMI Shielding Products Catalog Interactive 52-page Catalog lets the user jump from page-to-page with a click of the mouse and even download interactive sales drawings of over 150 shielding products including BeCu gaskets, metalized fabric, fan vents, and board level shielding. A printed version is also offered.

Honeycomb Vents use lightweight extruded aluminum frames for increased strength. Many standard designs are available, plus custom designs.

Download Interactive Shielding Products Catalog at

www.tech-etch.com/shield

Workstation equipped with conveyor solutions

ISO 9001:2000 REGISTERED

TECH-ETCH, INC., 45 Aldrin Road, Plymouth, MA 02360 • TEL 508-747-0300 • FAX 508-746-9639 http://ept.hotims.com/28773-17

JJB-HT series antenna is available in a high-temperature, reflow compatible housing, suitable for both hand and automated assembly. The RoHS compliant units withstand reflow processing temperatures of up to 260C. The compact monopole devices are suitable for OEM applications requiring a low-cost internal or external solution. Products are supplied in tape and reel packaging. ANTENNA FACTOR http://ept.hotims.com/28773-117

Board Level Shielding manufactured using photoetching eliminates the expense of forming tools, plus improves design flexibility and delivery time.

Made in USA Two state-of-the-art facilities in Massachusetts are ready to manufacture your next order.

Antenna comes in hightemperature package

Arlink 8000 Modular Workstation System with conveyor solutions are ergonomically designed to provide flexibility in accommodating changing or future needs. Suitable for a variety of applications, such as assembly, inspection, testing, rework, packaging and material transfer, units can be assembled and reconfigured quickly. Product is available with a supplied conveyor system, or is easily integrated with an existing conveyor, for cost-effective, high-efficiency workflow management through the entire production stream. LISTA INTERNATIONAL http://ept.hotims.com/28773-118

full online product listings at.ept.hotims.com

electronic products and technology • november-december 2010

Contract MFG Services & Production Equipment

Inline wire and cable identification methods By Pete Doyon, VP product management, Schleuniger Inc.

Wire ID Concepts Introduction

Many OEM’s require that individual wires and cables used in their products be clearly identified with a mark or label. For some, such as in the military and aerospace markets, wire and cable identification (or “wire ID”) is mandatory and the process is governed by stringent specifications, such as SAE AS50881 (formerly MIL5088L). For others, the decision to use wire ID is a voluntary one. Wires and cables can be identified as part of an “inline” process while they are being cut to length and stripped on automatic equipment. Alternatively, wire ID can be applied using a secondary manual or semi-automatic process. The scope of this article is limited to inline wire ID. This article will describe what type of information is typically identified on wire and cables, concepts for improved productivity, what types of systems are available and the pros and cons of each. Wire ID is used to identify individual wires during the life of a product, from initial product assembly and testing to servicing the product years down the road. Key identification requirements are legibility, permanence and abrasion resistance. In order to meet those requirements, the identification method used must be well suited for the environment where the product will be utilized.

Inkjet marking

Typical Wire ID Uses: TERMINATION ID is the most common type and it clearly identifies where a wire or cable is terminated on a terminal strip, mating connector, etc. This style also prevents any miswiring during harness assembly, product assembly and testing. TRACEABILITY: Many industries require traceability of product components and sub-assemblies. Company logos, serial numbers and date codes can be directly marked or labeled on each wire or cable to aid in traceability. BAR CODING: Several of the wire ID methods allow barcodes to be printed directly on wire or cable or on labels that are applied to them. There is a practical limitation when using barcodes on wires or cables under 0.100”.

LEAN MFG OF WIRING HARNESSES: Wire ID can be very cost effective, especially in high mix, low volume applications, such as when building one wiring harness at a time. Fully integrated, PC controlled wire processing machines can produce all of the wires necessary to build one complete wiring harness. SINGLE WIRE VS. MANY COLORS: In high mix, low volume applications, the key to success is to reduce tooling changeover time to the absolute minimum. In wire processing applications, each wire color change can take from one to several minutes. By reducing the number of wire colors from 10 to 1, changeover frequency and therefore labor can be reduced by 90%. If permitted, using labeled white wire instead of many different colors can yield exceptional savings. SOME OF THE BENEFITS INCLUDE: • Reduced changeover frequency saves labor costs • Purchase bulk wire at a lower unit cost • All wires can be marked using one inkjet ink or hotstamp foil color • Larger reels or barrels impart less 'memory' on the wire, resulting in more consistent wire processing

and the marks are quite legible and permanent. Other than laser marking, it’s one of the few marking methods that can produce a permanent mark on Teflon insulations. It’s also easy to change the color of the marking foil, making it possible to print on every insulation color. On the negative side, the wire must be stationary while the hotstamp process takes place (approximately 1 sec cycle time), thus lowering the production throughput. LABELING MACHINES offer print and apply technology, making it possible to use them with inline wire processing systems. They provide high resolution (300+ dpi) print resolution and multi-line text capability. Like hotstamp, the wire must be stationary during the labeling process (4 – 5 sec cycle time), which also lowers the production rate. DIRECT THERMAL TRANSFER is a relative newcomer to wire ID. Instead of using thermal transfer technology to mark labels, the thermal transfer system marks directly onto the wire or cable. Like hotstamp marking or labeling, the wire or cable must stop during the marking process. The cycle time is slightly longer than hotstamp at approximately 1 to 2 seconds. An advantage of thermal transfer marking over labeling is that the cost

If the wiring harness for a given product was originally designed with many different colors, an alternative is to use white wire exclusively and print the name of the color it replaces on the wire. For example, the word “RED” could be printed every 3” along a white wire instead of using a red wire. In addition, the circuit number could be printed on the wire as well to distinguish it from other white wires that have the “RED” designation.

Hotstamp

MARKING ON-THE-FLY: Like laser marking, inkjet marking is done while the wire is moving, therefore the production rate of the wire processing machine is not greatly reduced. Continuous marking is best suited for inkjet or other marking methods that can be done ‘on-the-fly’.

Wire Identification Methods: Hotstamp marking is one of the oldest wire identification methods. On the positive side, it’s one of the lowest cost marking methods

INKJET: Marking systems used for marking wire and cable are of the continuous inkjet (CIJ) type. Newer inkjet printers on the market are simpler, faster and more reliable than their predecessors. They feature automatic startup / shutdown cycles and much better process control. LASER: There are a number of different laser sources that are used in wire marking. By far, the most common are those that produce wavelengths in the UV part of the spectrum. UV laser marking is used primarily for military and aerospace applications.

Conclusion

As wiring harnesses and cable assemblies become more complex, proper identification of individual wires and cables is crucial during wiring harness assembly, product assembly and testing as well as servicing. Things to consider when selecting the best wire ID methods and labeling includes: • Applicable specifications • Insulation types being marked • Information that needs to be marked (IE characters number, logos, etc.) • Typical batch sizes • Processing speed • Cost per mark According to Lean Principles, the ideal batch size is a quantity of one. A completely integrated wire marking / processing system can produce an individual wire on demand or all of the individual wires necessary to build one complete wiring harness. This results in less ‘work-inprocess’ and all of the other benefits of One-Piece-Flow manufacturing.

END MARKING is typically used for termination ID’s, while continuous marking can be used in addition to end marking to provide more information at preset intervals along each wire or cable assembly.

WIRE LIST MANAGEMENT SOFTWARE: Some type of Wire List Management Software (WLMS) is required to control the wire processing system and the inline Wire ID system. The WLMS is used to keep track of the processing parameters for every wire that will be produced. Typical parameters include wire type and size, overall wire length, strip lengths, marker text and marking positions.

per mark is much less since there are no labels to purchase.

For more information on wire and cable identification processes from Schleuniger Inc., go to http://ept.hotims.com/28773-119

From Prototype to Production...

The Lens You Need and The Support You Want

Universe Kogaku America Designs Lens Assemblies for Every Application... 1000s of Lens Sizes in Stock. Most Lenses Ship Same Day.

Medical Imaging Lenses Microscope Objectives & Eyepieces Photographic Lenses Lens Mounting Accessories Lens Filters and Accessories Image/Barcode Lenses

www.UKAoptics.com In USA: 516-624-2444 Email: info@ukaoptics.com

http://ept.hotims.com/28773-18

w w w. e p t . c a

UV Quartz Lenses CCD/CMOS Lenses CCTV Lenses Diode Laser Lenses High-Res Lenses Your Custom Lens

contract MFG services & production equipment

electronic products and technology • november-december 2010

Pneumatic angular grippers open to 180-degrees

Cabinet oven re-circulates airflow horizontally

DCT series pneumatic grippers are angular shaped with a 180° jaw opening, allowing complete release of a directly fed part. Gripper force ranges from 32 N (7.5 lbs) to 112 N (25 lbs). Product is compact and designed for confined spaces, while also adept in harsh environments due to the shielding that repels chips and other particulate from the internal drive mechanism. Unit can be used up to 5-million cycles in typical applications and 10-million with maintenance. Temperature rating is from -35 to 80C. OMEGA

No. 1002 electrically-heated 260C (500F) cabinet oven measures 20”W x 20”D x 20”H. 8KW are installed in Incoloy sheathed tubular elements to heat the unit, while a 400CFM, 1/3-HP recirculating blower provides horizontal airflow across the load. Unit provides 4-inch insulated walls throughout, Type 304, 2B stainless steel interior with continuously backwelded seam construction, stainless steel exterior with #4 brushed finish, heavy-duty door and door frame, three nickelplated wire shelves and adjustable patented opposed louvers on full coverage supply and return ductwork. GRIEVE

http://ept.hotims.com/28773-120

Room temperature curing epoxy combines strength, toughness

http://ept.hotims.com/28773-123

EP30D-7 two component epoxy provides strength, flexibility, abrasion resistance and toughness, suitable for high performance bonding, sealing, coating and encapsulating applications. Product is serviceable over the wide temperature range of -100F to above +250F. Product cures at room temperature or more rapidly at elevated temperatures with minimal shrinkage. System is 100% reactive and contains no solvents or diluents. Product resists thermal cycling and stands up to a variety of chemicals. MASTER BOND http://ept.hotims.com/28773-121

SMT stencil printers align down to 12-mil pitch SPR-45VA Stencil Printer for printed circuit board assembly with patented SMTrue Vision Assist providing accurate and reproducible board to stencil alignment, down to 12-mil ultra fine pitch. Product is also available with ‘Foil Frame’ adapter kit, allowing the use of frameless stencils or foils, reducing stencil cost. The ease of board placement with the adjustable board stops, ability to print on double-sided boards where one side is already populated, and the ability to carry out a test print for quick and easy set up of a new print job are all illustrated in this video. APS NOVASTAR

http://ept.hotims.com/28773-122

Ultraviolet quartz lens comes with focus lock

Labeling software runs on Windows platform

UV0928CM is a 9mm F/2.8 ultraviolet Quartz lens with focus lock is suitable for imaging applications in the non-visible light spectrum. Device comes with a C-Mount, but can be configured to suit any requirement. Product is available in a wide range of focal lengths. Products are well suited to forensic, industrial and scientific, while transmitting well into the Infra-red spectrum. UNIVERSE KOGAKU

Terminal Server version of firm’s EasyLabel 5 software for product identification, bar code and RFID labeling. Product provides all of the features that the Platinum version offers, but with the added ability to run on the Windows Terminal Server platform. A single version of product allows for an unlimited number of users. The software and hardware key are only installed on the Server. THARO SYSTEMS

http://ept.hotims.com/28773-124

http://ept.hotims.com/28773-125

Modular transfer system integrates cable processes TransferLine Modular Transfer Systems is based on a flexible, individually adaptable modular system that can handle up to 15 processing stations. The mechanical, pneumatic and electrical interfaces accommodates quick and simple retrofitting and installation of add-on modules. Cable fixtures and assembly nests – known as Shuttle and Carrier – handle various functions in the processing of the cable and the connector assembly. SCHLEUNIGER

http://ept.hotims.com/28773-126

SMD assembly machine is fast, flexible Cobra SMD pick-and-place systems contains the latest drive and material technologies, combined with quick changeover concepts making it reliable, fast and flexible for both high-volume and high-variety production. Unit combines the advantages of a highly flexible pick-and-place system with the high speed of a multi-axes SMD placement machine, with a placement speed of 20,000cph and a capacity of 240 feeders. Feeders can be exchanged without downtime during production. Maximum pcb size is adapted to US market requirements and specified at 23.6 x 23.6”. ESSEMTEC http://ept.hotims.com/28773-127

Termination tool handles standard jacks JackAX 110 Termination Tool terminates all standard brands of jacks, including 90-degree and 180-degree jacks as well as single row pairings. Product’s design ensures 110 jacks are properly terminated eliminating common NEXT and FEXT failures. Device utilizes standard 110 blades so no expensive die set heads need to be purchased. Engineered for ease of use, including applications inside walls and junction boxes, the blade is held in place with simple screw and it weighs 10.9oz. PLATINUM TOOLS http://ept.hotims.com/28773-128

newswatch

Henkel moves into state-of-the-art HQ Henkel’s Adhesive Electronics business has relocated its headquarters to a new 75,000-square-foot facility in Irvine CA, designed to accommodate the entire North American R&D team, consolidating staff and resources from three R&D sites under one roof. “The most important advantage is that our technical teams will be located together in one facility,” says Dr. Michael Todd, Henkel VP product development and engineering. “Our united R&D staff will have hands-on access to some of the most advanced semiconductor and SMT production equipment and research tools available, thus accelerating new product introductions.” The Irvine facility will house multi-functional staff including executive management, inside sales, global marketing, global product management, operations, finance, R&D, advanced research, human resource, IT and applications. http://ept.hotims.com/28773-19

full online product listings at ept.hotims.com

products on review

electronic products and technology • november-december 2010

Dc filter limits noise generated on the dc side of inverter

Integrated MOSFET and Schottky diode packaged in miniature SOT-563

FMER SOL dc filter series for use on the dc side of the inverter in photovoltaic systems and other DC systems. MPP (maximum power point) trackers generate disturbances into both the grid’s ac power line, as well as the dc side of the solar module. Available in standard and medical M5 versions, product is equipped with screw clamps for types up to 150A and copper bars for types upwards of 250A. Other types of connections, such as wires or copper bars <250A are also available. SCHURTER

CMLM0574 integrated MOSFET and Schottky diode packaged in the ultra miniature SOT-563 surface mount case, consists of a 30V, 450mA N-Channel MOSFET and a 40V, 500mA low VF Schottky diode. This integrated device is optimal for space constrained applications. Device provides true isolation between the MOSFET and diode for added design flexibility. Both devices have enhanced specifications. CENTRAL SEMICONDUCTOR http://ept.hotims.com/28773-148

http://ept.hotims.com/28773-146

PXI-based digital multimeters speeds measurement, eases operation

Design software automates static timing analysis process TimingDesigner 9.25 with enhanced Automerge functionality decreases the time required for performing interface timing analysis and provides accurate, comprehensive timing analysis. Product’s Automerge functionality provides a reusable, model based approach to timing analysis. Designers can quickly connect component timing models to create parameterized interface diagrams that can be used to validate timing and interactively test design alternatives. These interface models can be created very early in the design phase to help drive constraint definition and timing budgeting. EMA DESIGN AUTOMATION http://ept.hotims.com/28773-147

M9182A 6.5 digit and M9183A 6.5 digit enhanced-performance PXI digital multimeters (DMMs) measure common parameters such as DCV, DCI, ACV, ACI, 2- and 4-wire resistance and temperature. Each unit provides 30 partsper-million basic DCV and 300 parts-per-million basic ACV 1-year accuracies and inputs up to 300volts. Products deliver 4,500 readings-per-second and 20,000 readings-per-second, respectively. These fast reading speeds translate into higher test system throughput and lower cost of test. AGILENT TECHNOLOGIES http://ept.hotims.com/28773-149

KAL1006_Cords_Adv'10_NoDe_EP&TCit11_FIN:KAL1006_Cords_Adv'10_NoDe_EP&TCit11_FIN 10/21/10 9:53 PM Page 1

BOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES

Military connector weighs-in 60% lighter AMC series connector is light, compact and retains features of firm’s high-rel Mini-Snap military connectors. 60% lighter than standard military connectors, product is watertight and meets protection class IP68. Product provides non-reflective surface and lifetime greater than 5,000 mating cycles. The straight plug or right angle devices are both push-pull locking or break-apart, with pressure contacts available. Device operates at a temperature range of -55C to +125C. ODU-USA http://ept.hotims.com/28773-150

Photo-etched carbon-based parts suit medical apps Carbon-based conductive corrosion resistant coatings and the production etching of medical parts made from Nitinol, has been added to firm’s manufacturing of light-gauge, metal parts for the medical industry. The process is achieved through photo chemical etching, which produces intricate components with close tolerances. In addition to Nitinol, metals that can be etched include, titanium, tungsten, molybdenum, copper alloys, beryllium copper, stainless steels, aluminum, elgiloy, niobium, nickel alloys, silver and spring steels, plus polyimide film. Parts range in thickness from .0005” and up. TECH-ETCH http://ept.hotims.com/28773-151

S ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES C RS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCE OVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MAN NG NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLE ANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICU TOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS C S ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HAR

Countless possibilities, millions of solutionsTM

NGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS ARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPP OLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXE AMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTR

acetal hose metal core clamp MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SC on medical nylon screws on piping in plastic buckles S SCREWS SEALS SLEEVING equipment SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES inTIES TOOLS TURNTABLES TWIST-TIES WALL PLU in warehouse bilge on life jackets BALLS BOLTSship APTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPU Regional transformer at dock ELBOWS yard ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING RDS COUPLINGS COVERS CUBESHospital DEFENCE DISPLAY DOWELS safety station OVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHESnylon MARINE MASKING MAN NGS FLANGES FOOD PROCESSING FURNITURE luer fittings GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVA

cable ties on SEALS SLE NG NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS wire harnesses ANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICU

in crane TOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS C

housing HANDLES HAR S ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS NGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS

sealing washer in OLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXE portable AMPS CLIPS CLOSURES gasolineCOMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTR NGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVA tank ARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPP

MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SC

S SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLU APTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPU RDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING OVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MAN NG NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLE ANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICU TOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS C

S ELBOWS ELECTRICAL ELECTRONICS FEET in FITTINGS FLANGES Where FOOD will PROCESSING FURNITURE GROMMETS Hello toFASTENERS all our customers New Brunswick! you find Cords next...? GLIDES GOVERNMENT PP tubing HANDLES HAR

TM NGES HOLDERSstack-loks HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES in NUTS coffeePEGBOARD HOOKS

ARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPP securing vending machine

shipping in employee OLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXE

manifests cafeteria AMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTR NGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVA MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SC

In St. John, in Canada, wherever – there’s a little piece of Cords.

8 of the millions of solutions found in St. John

S ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HAR NGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS

new literature MOLD RELEASE AGENTS 20-page brochure provides detailed technical and application information on line of Frekote mold release agents for demanding composite and rubber molding applications. HENKEL http://ept.hotims.com/28773-152

WIDEBAND RADAR, SATCOM The Power of X application notes provide insight into solving tough measurement problems in unique way for both the design and manufacturing environments. ‘Solutions for Wideband Radar and Satcom Measurements’ describes how to use wide bandwidth oscilloscopes to measure and analyze X, Ku and Ka-band Radar and Satcom transmitter outputs up to 32GHz. AGILENT http://ept.hotims.com/28773-153

ARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPP OLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXE AMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTR NGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVA MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SC S SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLU APTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPU RDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING OVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MAN NG NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLE ANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICU TOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS C S ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HAR NGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS ARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPP

Cords Canada Ltd. Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080 FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS www.cordscanada.com

OLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXE AMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTR NGS FLANGES

HOSE HVA

MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SC S SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLU APTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPU RDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING

http://ept.hotims.com/28773-20

w w w. e p t . c a

electronic products and technology • november-december 2010

Thermal Management & Enclosures

Selection of

non-metallic enclosures

PROTECTS wastewater treatment system controls By Jim Brant, president, City Water LLC

City Water LLC, Williston FL, provides municipalities a turnkey wastewater treatment plant solution capable of effectively accommodating between 500 to 10,000 gallons. The evolution of this system featured the need to overcome a significant challenge specific to the reliable protection of critical controls.

The Challenge: enclosures fail to protect

Many wastewater treatment systems are in demanding environments subject to high humidity, corrosive salt water and strong UV degradation. After two-to-three years of service in such applications we began to notice that the integrity of our controls was being threatened by failure of the electrical enclosures used to house and supposedly protect them. At that time we used stainless steel enclosures that were not suitable for long-term reliability within this particular combination of environmental pressures. Part of this problem originates with the fact that although tensile strength is high with metal enclosures, flexural strength (the material’s ability to withstand denting) is relatively low. Once

metal has gone beyond its elastic limit it has created a potential leak path that could compromise an enclosure’s seal integrity. Initially we thought that simply by switching to non-metallic enclosures the problem would be solved. However, even with some non-metallics the harmful of effects of UV rays were still evident through ‘blooming’ of the polymeric substrate. Moreover, we were not satisfied with design elements that seemed to inhibit the amount of available space within such enclosures - and the ease with which controls could be mounted inside the boxes. Although we had improved performance results in flexural strength and the ability to withstand an impact without permanent deformation or denting, we still had not found the ideal enclosure product.

The Solution: non-metallic enclosures & UV protection

Consequently, we began to explore property performance characteristics of available product lines and discovered Stahlin Non-Metallic Enclosures. A primary dif-

ference in this product line is the fact that all enclosures are molded from SolarGuard, a patented sheet molded Turnkey wastewater treatment compound formulation plant solution includes that claims to provide non-metallic enclosures for superior molded-in UV protection of controls system. resistance. We found those claims to be true and consequently are now successfully using the Stahlin J Series of enclosures to protect our control systems from UV damage as well as other environmental threats such as corrosion and moisture. Additionally, the fact that Stahlin’s non-metallic enclosures are manufactured from a rugged composite material versus a molded thermoplastic, results in significant durability and impact resistance because of low coefficient of thermal expansion versus stainless steel. Certain design features have also proven to be of value. Specifically: the rounded corners, swing-out panels and optimum enclosure depth are conducive to easy, effective installation of controls. A poured polyurethane seamless gasket ensures that the enclosures remain waterproof and dust-tight. In our ‘deep-south’ applications, the reliable seal of Stahlin enclosures has an added benefit of keeping out the sometimes unfriendly lizard population.

The Conclusion

Not all enclosures are created equal. Success in any application demands that the proper enclosure product be specified to meet the individual environmental factors impacting the reliability of proper protection for important controls and electrical systems.

BEAT THE HEAT.

Controls system is protected from corrosion by nonmetallic enclosure.

For more information on non-metallic enclosures from Stahlin Non-Metallic Enclosures, go to http://ept.hotims.com/28773-129

Radian Heatsinks Active or Passive; our thermal engineers are here to help! • Complementary thermal design and support. • Optimizing your thermal package.

Boost your Assembly Productivity

• CFD evaluation on custom designs.

the mess, mess,hassle hassleand andcost costofofgreases greases clips •• Avoid the andand clips longcure curetimes timesandand ﬁxturing of liquid adhesives •• Eliminate Eliminate long fixturing of liquid adhesives •• Speed Can beassembly die-cut andwith pre-applied one surface later bonding quick andto easy die-cutfor shapes

• Standard off the shelf products.

• Complete in house test lab.

™ 3M Thermally 3M™ ThermallyConductive ConductiveTapes Tapescombine combineour ourhighest highest acrylic adhesive adhesive with withhighly highlyconductive conductiveceramic ceramic performance acrylic providean anextremely extremelyreliable reliableand anduser-friendly user-friendly particles toto provide material. Needhelp helpwith withThermal Thermal thermal interface material.Need it. rely Relyonon3M 3Mtotohelp helpyour yournext next Management? Don’t sweat it, design beat the heat. Visit us at www.3M.com/electronics

UL Listing 746C Listing High Temperature Adhesion Dielectric strength

http://ept.hotims.com/28773-21

2160 Walsh Ave, Santa Clara, CA 95050 • 408 988-6200 www.radianheatsinks.com http://ept.hotims.com/28773-22

full online product listings at ept.hotims.com

thermal management & enclosures

electronic products and technology • november-december 2010

Heavy duty, die-cast enclosure is thick wall IP66 sealed

RoHS complaint cabinets protect rack-mount equipment

1550Z family of die-cast enclosures includes a range of thick wall (3 to 4mm, depending on size) IP66 (NEMA 1, 4, 4X, 12 and 13 ratings) sealed boxes for use in applications where impact protection and environmental sealing are primary requirements. The 18 industrystandard sizes in the family range from 50 x 45 x 30mm to 223 x 147 x 83mm, and as standard they are supplied in either natural with a smooth vibra-finish or in a tough black polyester powder coated finish. HAMMOND MANUFACTURING

Schroff brand MIDAS cabinets house a variety of 19 or 23-inch rackmount equipment, providing high value and functionality. Units are fully-welded with heavygauge steel frame, providing the ability to mount equipment, cable management, active cooling and other accessories. Pre-configured models are available in six standard sizes and engineered solutions are also available. Models range in size from 23RU to 48RU (1200 to 2100mm) high, 600 to 700mm wide and 800 to 1000mm deep. PENTAIR TECHNICAL PRODUCTS

http://ept.hotims.com/28773-130

http://ept.hotims.com/28773-132

Compact MicroTCA platform delivers up to four double-width full-size AdvancedMC modules OM6040D MicroTCA platform is designed for up to four high-end AdvancedMCs and provides a 10 Gbit/s Ethernet switched backplane enabling high data flow rates. In the maximum configuration with 4x Kontron AM5030 processor modules, the 5U platform hosts up to 16 Intel Xeon processor cores and 96GB of RAM. The compact and modular platform is suitable for applications with demands on performance and data throughput. Product is based on a compact chassis (266 x 428 x 365 mm) and comes in a costoptimized design with two pluggable ac-dc power supply units, integrated power management and fan control on the backplane. KONTRON http://ept.hotims.com/28773-136

Modular cabinet enclosure simplifies customization

VXS backplanes include Ethernet control channel

Elma IT cabinet provides an extrusion-based modular design, advanced cable management and convex perforated doors. Product’s modular design simplifies customized requests. Geared for cable-intensive applications, the cabinet has several cable managers, brackets, D-rings, Velcro straps and bundle retainers. Other options include cable spacers, fiber optic cable manager, and a brush cable manager which allow cables through but contain airflow for thermal management. OPTIMA EPS

VXS backplanes provide a Gigabit Ethernet control layer channel per VITA 41.6. The first in the product series is a 20-slot size, which provides a dual star routing topology and 18-layer stripline design. The Gigabit Ethernet control channel provides for out-of-band communication, important for system management, software and firmware upgrades, and initiating new processes on specific boards. The 7U high backplane also has power studs in 3.3V, 5V, 12V, and GND along the top and bottom of the backplane to allow for flexible power options. ELMA BUSTRONIC

http://ept.hotims.com/28773-131

http://ept.hotims.com/28773-133

NEMA 4X IP 67 RoHS

Active ORing solution addresses redundant intermediate bus requirements

Compliant

Picor PI2127 Cool-ORing is a universal high-speed discrete active ORing controller that addresses a broad range of redundant intermediate bus requirements for high-availability systems such as servers, high-end telecommunications and computing, and communications infrastructure systems. Product is a complete high-density, full-function Active ORing solution with an integrated high-speed ORing MOSFET controller and a very low on-state resistance MOSFET. This minimizes the system board real estate required to achieve the ideal ORing diode function. VICOR http://ept.hotims.com/28773-134

http://ept.hotims.com/28773-23 FX14EPT1106OL.indd 1

Thermal imaging solution expands view of process performance Raytek ThermoView Pi20 process imager and DataTemp Pi (DTPi) software delivers easy-to-use thermal imaging solution for an expanded view of process performance in a wide range of industrial applications. Product provides a real-time process view of thermal images, allowing plant operators to shorten process startup times and lower production line changeover costs. The camera is paired with the intuitive DTPi software, which minimizes or eliminates the long learning curve associated with many process imaging systems. Product comes in two temperature ranges: -40 to 500C (-40 to 932F) and 200 to 2000C (392 to 3632F). RAYTEK http://ept.hotims.com/28773-135

http://ept.hotims.com/28773-24

w w w. e p t . c a

9/29/06 1:21:25 PM

JANUARY

MON

TUES

WED

THURS

FRI

18 25

MARCH/APRIL

March ELECTROPAC Closing

Closing

24 31

APRIL SUN

MON

TUES

WED

JUNE/JULY

2 9

APEX Expo: Apr 12-14 • Mandalay Bay Convention Ctr http://www.ipcapexexpo.org/

June ELECTROPAC Closing

Closing

SAT

EP&T Editorial

FRI

EPTECH • Toronto www.ept.ca

NAB Show: Apr 11-14 • Las Vegas Convention Center http://www.nabshow.com/2011

THURS

EPTECH Montreal •• Winnipeg www.ept.ca

International CES • Las Vegas Hilton Center www.cesweb.org

EP&T Editorial

23 30

SAT

JUNE/JULY

EP&T Ad

Closing

SUN

MON

TUES

SEPTEMBER

JULY WED

THURS

FRI

SAT

EP&T Editorial

Closing

Semicon West 2011 • Moscone Center, San Francisco, CA http://semiconwest.org/

September ELECTROPAC Closing

24 31

OCTOBER SUN

MON

TUES

WED

THURS

FRI

SAT

NOV/DEC

1 8

EP&T Ad

Closing

23 30

24 31

4G World: Oct 18-21 • McCormick Place, Chicago IL http://www.4GWorld.com

EPTECH • Mississauga www.ept.ca

SUN

electronic products and technology

SUN

FEBRUARY MON

TUES

WED

THURS

DesignCon • Santa Clara Convention Center, www.designcon.com/2011/

FRI

SAT

MARCH/APRIL

EP&T Ad

Closing

1SUN

MON

MD&M Show (Medical Design & Mfg) • Anaheim Convention Center www.mdmwest.com

MAY TUES

WED

THURS

FRI

SAT

EPTECH • Ottawa www.ept.ca

SUN

MON

EDS Show • Las Vegas, NV; Paris and Bally's Hotels http://www.edsc.org/

AUGUST 1

TUES

WED

THURS

FRI

SAT

SEPTEMBER

NI Week , National Instruments • Austin Convention Center, Austin, TX www.ni.com/niweek/

EP&T Ad

Closing

OCTOBER

EP&T Editorial

Closing

NOVEMBER SUN

MON

TUES

WED

THURS

FRI

SAT

JAN/FEB 2012

2012 Ad

EP&T Editorial

Closing

ELECTROSOURCE

electronic products and technology

ElectroSonic_EP&T_calendar2011.pdf 10/14/2010 4:17:51 PM

SUN

MON

MARCH TUES

MAY

WED

THURS

FRI

SAT

EP&T Editorial

Closing

APEC: Mar 6-10 http://www. apec-conf.org/

MAY

EP&T Editorial

Closing

EPTECH • Calgary www.ept.ca

EPTECH • Edmonton www.ept.ca

MAY

Live Technical Sales people available to answer the call: 800.567.6642

EP&T Ad

Closing

31 Electro Sonic is an authorized distributor for over 150 manufacturers, including:

JUNE SUN

MON

TUES

WED

AUGUST

EP&T Editorial

Closing

AUGUST

THURS

FRI

EPTECH • Vancouver www.ept.ca

SAT

Closing

18th Annual Electronics Industry Golf Tournament

EP&T Editorial

AUGUST

CMY

3M Agilent Technologies Aimtec Inc. Alpha Wire Amphenol APEM Components Bourns Brady Bussmann Carling Technologies Inc. Cornell Dubilier Crydom Inc. EBM Papst Ferraz Shawmut

Fluke Hammond Hoffman Honeywell ITT Cannon Kemet Kester Keystone Electronics Littelfuse M.G. Products Microchip Mode NKK Switches NMB Technologies

Omron Orion Fans Panduit PUI Audio Samtec Schroff Sola Switchcraft Tadiran Tektronix Tyco Electronics Vishay Weidmüller and more…

EP&T Ad

Closing

SUN

SEPTEMBER MON

TUES

WED

THURS

FRI

SAT

OCTOBER

EP&T Ad

Closing

EP&T Editorial

Closing

EPTECH • Quebec City www.ept.ca

NOV/DEC

7 14

WiMAX World • McCormick Place www.4Gworld.com

http://ept.hotims.com/28773-25

2011

DECEMBER SUN

MON

TUES

WED

www.e-sonic.com 800.56.SONIC

EPTECH • Halifax www.ept.ca

New 80,000 square foot Distribution Centre North American Next Day Delivery on in-stock orders received by 7:30 p.m. EST 30,000 In-stock SKUs Electro Sonic serves over 15,000 customers Flexible supply chain solutions matched to unique customer requirements Leveraging 58 years of success serving the Canadian electronics and electrical markets

THURS

FRI

JAN/FEB 2011

SAT

www.ept.ca updates you on...

EP&T Ad

Closing

• Daily new product introductions and news articles

• Current and archived editions of EP&T

• Registration for the regional EPTECH show in your area 12 Concorde Place, Suite 800 Toronto, On M3C 4J2 Tel: 416.442.5600 • Fax: 416.510.5133 info@ept.ca • www.ept.ca

Canada's Leading Electronics Magazine

thermal management & enclosures

electronic products and technology • november-december 2010

Reinforced thermal material for die-cutting prevents distortion Sarcon 100GR-FL low resistance and highly durable thermal interface gap filler pad is comprised of a gel-like material manufactured with an integrated nylon mesh layer that prevents distortion and stretching during diecut operations. The true-to-form gap filler pad is easy to install and increases productivity compared to non-reinforced alternatives. Product will transfer heat with a thermal conductivity of 2.8W/m-K and a thermal resistance of .67°Cin2/W at 14.5 PSI when placed between a heat source such as a high-performance semiconductor and a nearby heat sink. The 1.0mm thick, flame retardant TIM is available in sheets up to 300mm x 200mm. FUJIPOLY AMERICA http://ept.hotims.com/28773-137

3U rugged conduction cooled enclosure meets harsh military standards CCE-3VX4 VPX CUBE ruggedized 4 slot conduction cooled enclosure for VPX 3U modules is designed to MIL-STD-810F, DO-160E and MIL-STD-461E standards, and compliant with applicable VITA 46 (VPX), VITA 48 (REDI) and VITA 65 (OpenVPX) specifications. Unit provides 4 slots of 3U VPX on a 1” pitch high bandwidth backplane and an integrated, wide temperature range 400 Watt power supply. Chassis is cold plate base coupled conduction cooled. Its short and efficient thermal conductivity path provides for robust cooling performance and maximum power dissipation. Operating temperature range is -40C to +85C. DAWN VME PRODUCTS http://ept.hotims.com/28773-140

Multi-channel airflow, temperature test equipment is ‘plug & play’ Cambridge AccuSense ATM–2400 Airflow Measurement System, suitable for laboratory environment, provides ‘plug & play’ versatility of the USB-based equipment and reduces set-up time, while generating faster results. Product accepts up to 36 airflow and temperature sensors, which can be used simultaneously. Device is also useful in products where precise and reliable air flow is mission-critical, such as bio-safety containment cabinets, fume hoods and clean room fan-filter markets. These systems can be designed, calibrated and certified using the ATMDEGREE CONTROLS http://ept.hotims.com/28773-138

Extended ferrites improve cooling of low-profile resonant transformers 200Watt (55mm x 40mm x 8mm) transformer is designed for a resonant half bridge operation. Firm can design the low profile transformers for many switch mode topologies with operating frequencies of over 200khz. Device provides input voltage is 400V with over 3000Vrms isolation and full 8mm creepage and clearance. The total power losses are under 3.8 watts with 40C temperature rise with no additional cooling. The efficiency of this magnetic is in the 98% range. The parts can be used without a heatsink. PAYTON AMERICA http://ept.hotims.com/28773-141

Sensor system ensures optimal heat sink efficiency Tactilus heat-sink analysis system quickly tests and corrects the surface contact and pressure distribution between the heat sink and its source. Users can visualize actual contact forces and pressure distribution data on the circuit board components. As the mounting screws between the CPU and the heat sink are torqued, product maps and measures the changing pressure distribution between the mating surfaces and displays it through its software. Product is flexible and 0.015-in. thick (0.38 mm), allowing it to be placed between the CPU and heat sink without affecting the assembly. The sensor pad has 625 resistive sensing points arrayed on a 25×25 grid. SENSOR PRODUCTS http://ept.hotims.com/28773-139

The finest line of workstations ever assembled.

Wall mounted rack is EIA compliant ER-W24 wall mounted rack is EIA compliant, provides 13 rack spaces, with a 24-inch rail height and a 100lb load capacity. Available in 19-inch steel and aluminum construction, product provides lift on/off wall mount plate and opens from either the left or the right side. Product comes with standard 10-32 threading and black static resistant powder coat finish. VIDEO MOUNT PRODUCTS http://ept.hotims.com/28773-142

Enclosure reduces equipment noise 99% ACL 24TD enclosure operates with room temperature air, drawn in through a reusable/ washable filter, directly to your electronic equipment. Unit provides 1600 watts of waste heat removal, while optional higher power versions are available. Rack mount capacity of 24u for electronic equipment up to 34” deep. Reduces equipment noise by 99% - from 71dBA down to 33dBA. Design includes acoustic labyrinth and baffles to trap noise inside, while allowing hot air to escape. Filtered intake air keeps dirt and dust from entering equipment and reducing performance. Available in black finish standard (Maple finish by special order). NOREN http://ept.hotims.com/28773-143

High performance plastic enclosures ease customization ARCA State-of-the-art JIC enclosures are manufactured using injection molded polycarbonate (PC), a high performance plastic, and provide ease of customization, robustness, superior chemical resistance, and wide temperature range. Products are UL Listed and NEMA 4X rated, in 10 standard interior enclosure sizes, including five new sizes recently introduced. All sizes provide transparent or opaque screw and hinged covers, plus latch options, plus complete range of mounting plates, plus fixed and hinged inner panels. FIBOX http://ept.hotims.com/28773-144

Mounting push pin provides constant pressure on heatsink Push-Magic Mounting Solutions provide constant pressure as push pin attachments for heatsink and fansink designs. Tensionmounted device ledges lock between board to maintain constant pressure on printed circuit board. Versatile, spring-loaded push pin mechanism and multiple pin height options provide optimum fit for most board thicknesses. Product’s material provides flame-proof delivery and tool-free installation ensures convenient heatsink mounting and removal. Product is available for standard/custom heatsink and fansink designs. RADIAN HEATSINKS http://ept.hotims.com/28773-145

newswatch

Lista workstations for electronic and assembly operations can be configured for maximum productivity. Lista workstations are designed to let you configure and reconfigure quickly and easily. Maximum flexibility and productivity – go configure!

COMPLIMENTARY DESIGN SERVICES Need a custom solution to precisely fit your unique space and usage requirements? Register at www.listaintl.com/ListaWorks10 or call 800-722-3020 for your free ListaWorks™ survey and design.

Milplex attains UL thermal material certifications Milplex Circuit (Canada) Inc. has attained several UL Certifications for the fabrication of printed circuit boards using T- Lam and T-Preg materials provided by Laird Technologies. “This is a wonderful accomplishment for our team because during the past year we have produced and submitted one of the largest selections of samples to U.L. in history when it comes to Laird Technologies family of thermally conductive materials,” says Milplex general manager Charles Hazen. Milplex’ sample selection included 148 submittals comprised of several thermally conductive products; including thermally conductive, electrically insulating T-preg, T-lam, single sided insulated metal pcbs, T-lam SS and double sided and multi layer circuits. All have been approved. “Having such a large selection of UL approved products will allow us to serve our thermal customers by providing them with almost any U.L. certified printed circuit board solution that they might require,” adds Greg Smith, director of sales.

http://ept.hotims.com/28773-26

full online product listings at ept.hotims.com

electronic products and technology • november-december 2010

products on review

Laser machine depanels assembled printed circuit boards MicroLine 1000 S cuts break-out tabs and complex contours with high accuracy. Unit’s UV laser makes clean, burr-free cuts in FR4, FR5, CEM, ceramic, polyimide, polyester and other pcb substrates. Laser demonstrates its superiority over conventional cutting systems when handling flexible and very thin substrates. The UV laser will cut substrates even right next to delicate components and tracks without causing any mechanical stress. LPKF LASER & ELECTRONICS

2 011

http://ept.hotims.com/28773-154

Resettable circuit breakers combine fuse terminal and thermal-magnetic benefits UT 6-TMC M series of resettable, single-pole circuit breakers with screw connections, combine the advantages of fuse terminal blocks with the benefits of thermal-magnetic circuit breakers. Tripped circuit breakers on the TMC are clearly indicated and can be easily reset with the press of a button. The series is available in 11 graded steps for nominal currents from 0.5 to 16 A. Devices measure 12.3mm wide and occupy 30% less space than conventional units. PHOENIX CONTACT http://ept.hotims.com/28773-155

Middle mount stereo jacks boosts flexibility STX-35398 series mid-mount stereo jack option includes surface mount and through-hole options. Device adds flexibility to board mount designs as applications are continuously requiring smaller, lower profile and higher functions. Product complies with EIA standards and is available as a 3.5mm diameter opening, 3-pole with one open switch and 5 pins. KYCON

http://ept.hotims.com/28773-156

Panel mount relay holds high UL ratings AZ22801 series panel mount relays provide high UL and CUR ratings for this class, delivering higher load ratings (up to 250k cycles on standard) and longer life to end product. Device’s UL ratings include: 40A at 240Vac resistive load on the normally open (NO) contacts; 30A at 277Vac general purpose load for normally open (NO) contacts; 20A at 240Vac resistive load at 250k cycles; 25A at 277Vac resistive load at 100k cycles. AMERICAN ZETTLER

C O R P O R AT E OVERVIEW • AVNET EM

http://ept.hotims.com/28773-157

• CENTRAL SEMICONDUCTOR • DIGI-KEY • EMA DESIGN AUTOMATION • MOUSER ELECTRONICS LED driver optimized for coin cell backlighting CAT3661 one-channel Quad-Mode LED Driver for ultra low power LED applications and utilizes patented technology to combine small form factor and long battery life. Device uses a patented architecture and integrates fault protection and fault diagnostics, and can drive a single LED backlight with a current of up to 5mA. Packaged in a 16-lead TQFN package measuring just 3 mm x 3 mm x 0.8 mm high, device provides a valuable solution for engineers working on new designs where available board space is limited. ON SEMICONDUCTOR http://ept.hotims.com/28773-158

w w w. e p t . c a

Paste transfer process enhances efficiency ProActiv process technology eases the challenge of increasing miniaturization by rewriting the area ratio rules that limit conventional printing with smaller stencil apertures. Suitable for OEMs dealing with high density heterogeneous boards and ultra fine pitch assemblies, product enables next generation components to be printed alongside standard components, using only a conventional printing process with a single thickness stencil. Printing technique that extends the print process window down to a level that makes consistent printing of small apertures for 0.3mm CSPs and 01005 passives a reality. DEK http://ept.hotims.com/28773-159

• ODU USA • PHOENIX CONTACT • WEIDMULLER

TURN THE PAGE FOR PROFILES OF LEADING ELECTRONIC SUPPLIERS

Today’s OEM, EMS and embedded systems customers are more challenged than ever before to remain competitive in an increasingly global, complex and unpredictable electronics market. While there are few absolutes in our industry, one thing is for sure: the proliferation of electronics is here to stay. That means more opportunities and more challenges ahead. Fortunately, you don’t have to go it alone. Authorized distribution, at the center of the electronics supply chain, offering offers a growing array of services aimed at meeting customer needs from product design through delivery. So, which partner is right for you? With Avnet Electronics Marketing, you don’t have to choose between the customer service excellence of a local distributor and the extensive product offerings of a global player, nor do you have to forgo technical expertise for supply chain savvy - we do it all. Our balanced supply and design chain solutions approach is driven by one clear objective: accelerating our partners’ success. From our broad array of semiconductor, interconnect, passive, electromechanical and specialty components, to inventory management, embedded solutions, e-commerce capabilities, design support and financial and logistics services, Avnet is the consummate one-stop shop.

Technology Powerhouse

Design Chain Expertise

Supply Chain Reach

That’s why Avnet is the distributor of

Our commitment to serving the engineering

As one of the world’s largest distributors,

choice for customers worldwide. As a

and technical needs of our OEM customers

Avnet Electronics Marketing’s innovative

distributor and trusted advisor, Avnet’s

and semiconductor partners is further

supply chain management solutions, world-

job is to bring the right suppliers and

evidenced by our ongoing investments in

class logistics support and lean inventory

technologies together to help customers

support of customers’ in-house engineering

management capabilities give our customers

accelerate their solutions employing not

teams. Our engineer-to-account-manager

greater command and control over their

only today’s hottest technologies, but

ratio of 2.5-to-1 gives customers access

global supply chains. Our expert market

tomorrow’s as well. Avnet’s strategic

to distribution’s best technical expertise to

intelligence and communications capabilities

partnerships and dedicated technical

help complete designs quickly. Our design

provide visibility into global demand and

resources are lowering the barrier to

engineers are highly trained EEs who average

supply that to mitigate the disruption from

entry and paving the way for customers

nearly two decades of design experience.

demand fluctuations. So, the inevitable

and suppliers to penetrate new markets

And, Avnet engineers don’t just talk the talk.

swings from boom to bust and back again

and adopt emerging technologies, such

Avnet engineers are innovators and experts

don’t have to jeopardize your business or

as high-brightness LEDs, renewable

in their own right - with more than 40 patents

your bottom line.

energy and smart power technology.

in their names. Consider them your very own high-tech secret weapon.

Contact us today to learn how the right distribution partner can give you the competitive edge you need to succeed in today’s electronics market.

1 800 332 8638 www.em.avnet.com Follow us on Twitter!

www.twitter.com/avnetdesignwire

http://ept.hotims.com/28773-27

Accelerating the Speed of Design. ™

Your one solution for design creation. Avnet Memec focuses on a select group of leading suppliers to provide original equipment manufacturers (OEMs) a high level of technical expertise — enabling the swift and accurate design of leading-edge products.

Your one solution for design creation.

With factory trained and certified support, Avnet Memec specialists offer a level of technical depth unmatched in the industry. easy access to our suppliers industry experts, your projects move forward Avnet Memec focuses on aWith select group of leading to provide original equipment with greater velocity, driven by in-depth technical expertise. That translates into faster time to manufacturers (OEMs) a high level of technical expertise — enabling the swift and accurate ™ Avnet is ranked market for you, with greater ease and confidence. From Design to Delivery. design of leading-edge products. Best-in-Class* for online seminars, design & engineering services and knowledgeable application proof that we consistently deliver: With factory engineers trained and–certified support, Avnet Memec specialists offer a level of technical depth unmatched in the industry. With easy access to our industry experts, your projects move forward > Proactive engineering with greater velocity, drivensupport by in-depth technical expertise. That translates into faster time to > Factory certified FAEs market for you, with greater ease and confidence. From Design to Delivery.™ Avnet is ranked Best-in-Class* for online seminars, design & engineering services and knowledgeable ™ Accelerate Time to Market. application engineers – proof that we consistently deliver: Visit the Avnet Design Resource Center™ at: www.em.avnet.com/drc > Proactive engineering support > Factory certified FAEs

Accelerate Time to Market.™ Visit the Avnet Design Resource Center™ at: www.em.avnet.com/drc

1 800 332 8638 www.em.avnet.com *As rated by Hearst Electronics Group: The Engineer & Supplier Interface Study, 2009. ©Avnet, Inc. 2010. All rights reserved. AVNET is a registered trademark of Avnet, Inc.

1 800 332 8638 www.em.avnet.com Follow us on Twitter!

www.twitter.com/avnetdesignwire

http://ept.hotims.com/28773-28

Stay protected...

SOT-953 package

1.05mm x 1.05mm x 0.5mm

• Utilizes 61% less board space (compared with 4 SOD-923 devices)

• 12V, 18W, 8kV ESD protection (HBM) • Low capacitance/low leakage

with Central’s broad range of TVS products. Why do discriminating designers select Central Semiconductor’s TVS products?

Today’s sophisticated electronic components and systems are susceptible to damage induced by electrical energy surges. Potentially destructive surges have many sources such as lightning strikes, inductive load switching or electrostatic discharge caused by human contact. Whatever the source, Central Semiconductor has a transient voltage suppressor (TVS) to prevent critical damage.

Portfolio: A broad range of power ratings and package alternatives Technology: Low capacitance options for today’s high speed data line applications

12V, Quad TVS Array 5.6V, Quad TVS Array 6.8V, Quad TVS Array

Request your samples today

SOT-953

200W

CMNTVS12V * CMNTVS5V6 *CMNTVS6V8 CMF5.0A Series

Uni-Polar, 5V - 170V

600W

Description

Ease of doing business: Product sampling, design kits and sales engineering support

Package Type

1SMB5.0A Series 1SMB5.0CA Series P6SMB6.8A Series P6SMB6.8CA Series

Uni-Polar, 5V - 170V Bi-Polar, 5V - 170V Uni-Polar, 6.8V - 250V Bi-Polar, 6.8V - 250V

SMB

1500W

Central Semiconductor Part Number

1SMC5.0A Series 1SMC5.0CA Series 1.5SMC6.8A Series 1.5SMC6.8CA Series

Uni-Polar, 5V - 170V Bi-Polar, 5V - 170V Uni-Polar, 6.8V - 220V Bi-Polar, 6.8V - 220V

SMC

3000W

Peak Pulse Power

18W

TVS devices manufactured by Central™

3SMC5.0A Series 3SMC5.0CA Series

Uni-Polar, 5V - 170V Bi-Polar, 5V - 170V

SOD-123F

Call 631-435-1110 or visit: www.centralsemi.com/tvs8

SMC *Please call

Represented in Canada by:

Optimum Components Inc.:

http://ept.hotims.com/28773-29

Toronto & Surrounding Areas: tel: (905) 477-9393 • email: mikep@optimumcomponents.com Montreal/Ottawa/Quebec City: tel: (514) 426-1114 • email: peterr@optimumcomponents.com

Halco Incorporated.: British Columbia/Alberta: tel: (425) 497-8500 • email: sales@halco-sales.com

Small Signal Transistors TVS

Bipolar Power Transistors

Rectifiers

Thyristors

Energy Efficient Devices Transient Voltage Suppressors

MDMs MOSFETs

www.centralsemi.com

145 Adams Avenue, Hauppauge, NY 11788 USA • Tel: (631) 435-1110

Discrete semiconductors for an ever-changing world A Trusted Source Since 1974 Central Semiconductor Corp has manufactured world class discrete semiconductors to meet designers’ ever-changing requirements.

Innovative Solutions Whether you need an enhanced specication, have a space limitation, or require a custom device; Central has the experience and exibility to provide a successful solution.

Core Product Advantages Central excels in the following product areas: • Innovative space saving discrete devices • Selected electrical specications to meet required criteria • Special wafer diffusion to yield desired specication • Custom device development • Obsolescence management/ End of Life support • Wafer and chip form devices

Rapid Device Development From concept to nal product, Central’s design team will explore all new product requests and will rapidly fulll custom device requirements whenever possible.

Broad Range of Devices Central manufactures surface mount and through hole discrete semiconductors in the following device families: • Small signal transistors • Bipolar power transistors • Small signal MOSFETs • Diodes

• Rectiers • Thyristors • Device combinations

Customer Support Central has experienced and knowledgeable support staff ready to help guide you through device selection, evaluation, and procurement. • Free samples • Design kits • On-line technical i l data d t • Environmental data • Custom device support

Device Overview The following provides a brief overview of Central’s product range.

Small Signal Transistors • General Purpose • Saturated Switches • Low Noise Ampliers • High Current • High Voltage

• Low VCE(SAT) • RF Oscillator • Chopper • Darlington • Combinations

Bipolar Power Transistors

Rectifiers • General Purpose • Fast Recovery • Ultra Fast Recovery • Super Fast Recovery

• Schottky • Bridge • Combinations

Chip Form Devices In addition to packaged products Central offers many devices in chip form for hybrid applications.

• General Purpose • High Voltage • Darlington • Low VCE(SAT)

Small Signal MOSFETs • N-Channel and P-Channel • Combinations

EOL Life Support Program Central Semiconductor will continue to produce devices proclaimed EOL (End of Life) by other manufacturers. Central provides two valuable advantages: • Helping to insure product viability and extend life cycle without costly and unnecessary redesign • Eliminating the burdensome and many times costly lifetime buys that are offered as the only alternative to a premature device termination

Diodes • Switching • Schottky • Low Leakage • Ultra Low Leakage • Stabistors • Current Limiting

Thyristors

• Zener • Temperature Compensated Zener • ESD Transient Voltage Suppressors • Transient Voltage Suppressors (TVS) • Combinations

Central will continue to manufacture these devices as long as there is customer demand. For more information and to search for supported devices visit: www.centralsemi.com/product/eol

• SCRs • TRIACs

http://ept.hotims.com/28773-30

145 Adams Avenue, Hauppauge, NY 11788 USA • Tel: (631) 435-1110 • Fax: (631) 435-1824 • www.centralsemi.com

DIGI-KEY CORPORATION COMPANY PROFILE In 1972, Dr. Ron Stordahl, an innovative electrical engineer, started a distribution company to provide other design engineers with quality electronic components from a customer-centered distributor. Starting with a fairly small inventory and initially marketing mostly to hobbyists, Digi-Key grew and, thirty-eight years later, provides the industry’s broadest selection of electronic components available for off-the-shelf delivery to customers worldwide. As one of the world’s fastest-growing franchised distributor, Digi-Key has earned its reputation as an international electronic component distributor focused on providing top quality products and service to its customers around the globe. Digi-Key’s foundation is its commitment to a customer-centered business principle, which has propelled the company from the 11th largest global franchised component distributor in 2005 to the 8th largest in 2009, based on the May 2010 EE|Times Distribution survey. Digi-Key is the 4th largest electronic component distributor in North America. Digi-Key is an authorized global distributor of more than 440 of the world’s leading suppliers of semiconductor, passive, interconnect, and electromechanical products. Digi-Key stocks more than 500,000 board level components featured in its 2,700-page print catalog, and more than 1.7 million products are offered on Digi-Key’s Canadian website, www.digikey.ca. Customers in more than 170 countries order from Digi-Key’s expansive inventory of products available for off-the-shelf delivery. Digi-Key processes and ships orders to customers worldwide from its 600,000 square-foot (55,741 square-meter) Product Distribution Center (PDC) in Thief River Falls, Minnesota, USA. Additionally, Digi-Key has the ability to process an order from entry to shipping in as little as 15 minutes. Ninety-nine percent of Digi-Key orders are shipped the same day they are received. Digi-Key ships orders to customers worldwide by UPS, FedEx, USPS and DHL. For Digi-Key’s customers in North America, orders are shipped directly from Digi-Key’s PDC and routed to their destinations throughout Canada, Mexico, and the US for next-day delivery.

“Digi-Key has experienced steady growth in Canada with an increase of more than 46% in sales year over year for January through August 2010,” said Mark Larson, Digi-Key’s president and COO. “Digi-Key has maintained its position as the global franchised distributor with the industry’s largest offering of product available for off-the-shelf delivery. We are able to provide our customers with their design engineering and purchasing needs, whatever they need, when they need it.” Digi-Key also provides customer service, live technical support, and advanced supply chain solutions tools, as well as other value-added services from its central location in the US.

small quantity prototype orders without being subjected to minimum order quantities that require ordering a large number of parts. Digi-Key’s Bill-of-Materials (BOM) Manager provides real-time pricing and availability, secure storage, and easy search and reference features. The BOM system allows purchasers to create separate BOMs for specific projects and place orders for varying quantities of assemblies to be produced. Purchasers can create and save a BOM with correct part ratios and multiply by the number of assemblies during the ordering process. Digi-Key’s BOM enables purchasers to create a ‘single kit’ to package kits together or a ‘multi kit’ to package each kit separately. Purchasers can also create parts lists by quickly adding or importing a list of parts and then creating a quote or an order. Earlier this year, Digi-Key launched its iPhone application for iPhone, iPad and iPod touch users in North America. Digi-Key’s iPhone application is currently available in English and allows customers to create Digi-Key orders on their iPhone, iPad or iPod touch devices. Features of Digi-Key’s iPhone application enable users to search for parts, create shopping carts, place orders, access their My Digi-Key accounts, get product specifications, view product photos, learn about new products and new technologies at Digi-Key, and more.

“DIGI-KEY HAS EXPERIENCED STEADY GROWTH IN CANADA WITH AN INCREASE OF MORE THAN 46% IN SALES YEAR OVER YEAR FOR JANUARY THROUGH AUGUST 2010.” — MARK LARSON, PRESIDENT, DIGI-KEY CORPORATION Digi-Key’s assistance to purchasers and engineers is expansive. Digi-Key is committed to providing its customers in Canada with the tools and products necessary to advance from prototype design to production while simultaneously addressing cost and time-to-market issues in a streamlined process. From the initial concept to prototype build and production, Digi-Key provides purchasers and engineers with the ability to build and revise a bill of materials for a new device, construct a prototype, conduct field tests, and progress through supply chain management to full production. With Digi-Key’s design-to-production ecosystem, both large and small companies can create

www.digikey.ca 1.800.344.4539 http://ept.hotims.com/28773-31

Sort by Price is a feature available for all registered Digi-Key users after logging in to their My Digi-Key accounts. This feature is based on tier 1 or unit pricing and applies to all parts, all Digi-Key websites, and all Digi-Key supported currencies. Registered users can sort by price in ascending or descending order in addition to applying filters for product in stock, lead free product, and RoHS Compliant product. An Advanced Sort option is also available and allows users to request parts in specific quantities. “More customers are recognizing that Digi-Key can provide many valuable services to aid in the design process,” Larson said. “Digi-Key delivers on its service commitments. Our goal is to consistently meet these expectations for our customers in Canada, North America, and around the globe.”

http://ept.hotims.com/28773-32

http://ept.hotims.com/28773-33

IMPROVE EFFICIENCY AND PERFORMANCE

Wouldn't it be impressive if you could simulate everything from high-frequency systems to low-power IC designs with a single tool? You can with Cadence速 PSpice速 A/D release 16.3. PSpice A/D provides users with an upgraded waveform environment making it easier to review and analyze data for even the most complex simulations. PSpice is the standard all other simulators are measured against. Can you trust your design to anything less than the best? Truly scalable PCB technology Cadence OrCAD速 PCB design technologies comprise a complete, cost-effective PCB design solution, from design capture to final output. To successfully meet project goals, PCB designers and electrical engineers need powerful, intuitive, and integrated technologies that work seamlessly across the entire PCB design flow. OrCAD PCB design technologies offer fully integrated front-end design, analog/signal integrity simulation, and place-and-route technologies that boost productivity and shorten time to market. OrCAD makes it possible To learn more about the power and productivity gains made possible in the latest OrCAD releases, call EMA Design Automation, a Cadence Channel Partner, at 877.362.3321, e-mail us at info@ema-eda.com, or visit us online at www.ema-eda.com/orcadpossibilities.

息 2010 Cadence Design Systems, Inc. All rights reserved. Cadence, the Cadence logo, and OrCAD are registered trademarks of Cadence Design Systems, Inc. All others trademarks are the property of their respective holders.

Cadence Channel Partner http://ept.hotims.com/28773-34

ouser Electronics—a wholly-owned subsidiary of Berkshire Hathaway, Inc.—is one of the industry’s fastest growing global catalog and online electronic component distributors. Mouser is a company dedicated to supplying design engineers with the most rapid introduction of the newest products and leading-edge technologies combined with unsurpassed customer service and worldwide support. Focused on design engineers and buyers demanding small to medium quantities of the latest products, Mouser’s customer-focused distribution delivers tomorrow’s technology today.

mouser.com

The Newest Products For Your Newest Designs™

Same-Day Sam me-Daay Shipping

Mouser is a company that’s passionate about having the latest components available as soon as possible. The company delivers a time-to-market advantage to customers with its website and multiple print catalogs, featuring the newest products and technologies. Continuous updates are made to ensure the newest products are added and end-of-life products are removed, providing customers with easy access to the newest products and technologies. Mouser denes it as not What’s New, but What’s Next.

Mouser’s worldwide headquarters is based in Texas, USA, and totals 432,000 sq. ft., encompassing ofces, call and data centers, as well as its state-of-the-art warehouse. The wireless warehouse management system is streamlined to nearly perfect pick-and-ship operations. These hightech capabilities and the efcient order fulllment processes allow for fast delivery with same-day shipping on most orders received by 8 p.m. CST.

eCommerce Made Quick and Easy

Worldwide Worldw widde Customer Custtom mer S Service ervvicee

Mouser.com is updated daily with products from more than 400 industry-leading manufacturers represented online. The website searches nearly 7 million products to locate more than 1.8 million parts numbers that are available for easy online purchase. Also, you’ll nd in excess of 5 million downloadable data sheets, supplierspecic reference designs, application notes, technical design information and engineering tools. It even offers 12 language choices and accepts 15 international currencies. The site is constantly rened – adding new products daily, removing obsolete products, plus featuring numerous user-friendly tools, such as Project Manager with automatic re-order, BOM import capabilities, automatic order conrmation, Mouser search accelerator and other time-saving functions.

Mouser is dedicated to providing superior service and support to customers worldwide. In addition to the United States locations, Mouser has sales ofces around the world, including Asia (Shanghai, Hong Kong, Singapore and Thailand), as well as Germany, UK, India, Italy, Mexico, France and Israel. Mouser believes in providing the best customer service – regardless of the size of the customer or the size of the order. Breaking packs and no minimum orders, including onepiece shipping, are especially attractive to engineers working in the earliest stages of the engineering design cycle. In addition, the company supports numerous languages and accepts all major international currencies. Mouser is a company that rmly believes quality service and support should transcend all boundaries.

Not Just What’s New, What’s Next

Broad Product Line and Expansive Catalog Mouser Electronics is your one source for all board-level components and associated development tools utilized for total project design. The company’s broad-based linecard consists of components across the board from more than 400 industry-leading manufacturers of semiconductors, optoelectronics, embedded modules, as well as passives, interconnects, electromechanical, circuit protection devices, enclosures, thermal management, and wire/cable products.

Mouser and Mouser Electronics are registered trademarks of Mouser Electronics, Inc. Other products, logos, and company names mentioned herein, may be trademarks of their respective owners.

Get Your Hands On Whatâ&#x20AC;&#x2122;s Next.

Scan

mouser.com

The Newest Products For Your Newest Designs

â&#x201E;˘

Mouser and Mouser Electronics are registered trademarks of Mouser Electronics, Inc. Other products, logos, and company names mentioned herein, may be trademarks of their respective owners.

http://ept.hotims.com/28773-35

http://ept.hotims.com/28773-36

Phoenix Contact Maximum System Availability Phoenix Contact introduces the uninterruptible Trio Power USV 24V / 5A power supply combines the power supply itself and the electronic bypass in one and the same housing. When the AC line fails, the connected loads continue to operate without any interruption. For longer line failures, the PC mode ensures that a control system automatically restarts as soon as the supply voltage returns. This saves time when compared to a manual restart. The combination of four battery modules with capacities of 1.3, 3.4, 7.2 and 12 Ah with a rated voltage of 24 V DC allow individual buffer times to be configured. The battery modules are rail mounted and are only 52, 112, 164 and 231 mm wide. They have a life span of six years at an ambient temperature of 20°C. They are leak proof, suitable for high currents and deepdischarge proof. The final charging voltage is 27.6 V. Ambient temperatures of 0-40°C are recommended.

terminal Blocks with Push-in Connection technology (Pit)

Pit Relays

Using the new PIT range of terminal blocks from Phoenix Contact, solid or stranded wires with cross sections as small as 0.34 mm² (22 AWG) with ferrules, can now be connected directly without the need for any special tools. As soon as the wire is inserted, the contact springs open automatically. With insertion forces up to 50 percent lower than before, it has never been easier to plug in wires and make contact. The high contact forces exceed those stipulated by the relevant standards and ensure that the contacts between conductors are both reliable and of the highest quality. Wires can be removed using the actuator element, which is clearly identified by its orange colour. Simply press down the actuator to release the pressure on the contact springs, and remove the wire.

The new PLC-PIT coupling relays from Phoenix Contact can be simply and quickly connected up without tools thanks to the Push-In-Terminal (PIT). The push-in connection technology permits a high degree of usability and ergonomics. Using this connection technology, even small wires from 0.34 mm² and larger – such as sensor wires – can be reliably and simply connected as insertion is easy. With the PLC relay system, customers can choose between three connection systems: screw, spring cage, or PIT spring clamp connection. Just the same as the complete PLC relay system, PLC-PIT coupling relays offer many advantages: They are just 6.2 mm wide and are available in many special versions in addition to the universal types. A complete range of accessories with system cable adapters, feed terminals, and plug-in bridges are available for the relay system.

Phoenix ContACt starts construction on Milton headquarters

Pin-strip plugs with rising cage design The new PT 1.5/…PH-5,0 CLIP features a screw termination with a rising-cage contact design. It’s moulded mono-block design with compact outer dimensions. The PT CLIP includes rugged locking fingers that snap into the surrounding enclosure. This new PT product provides a unique rising-cage design with sturdy connections on a cost-effective pin strip. It’s ideal form many semi-industrial applications. Some features and benefits of the new PT 1,5 include it’s plus/minus screw head which allows flexibility in screwdriver choice, monoblock design provides greater structural support compared with dovetailed products, keying option ensures proper plugging location, industry-standard footprint with reliable retention fingers, wide pin-strip insertion funnel assists connection in blind mating, available from 2 to 16 position and good for 300 V, 5A and 28-14 AWG applications.

PHOENIX CONTACT has begun construction of their new Headquarters. The new facility will be representative of Phoenix Contact’s dedication to quality and style. Some of the features of the new 25,000 sqft building will feature an air-conditioned warehouse bathed in natural light, large visitor centre to house training for 50 persons, value-added solution centre and a modern electrical automation lab. The new facility, set to be opened during the summer of 2011, will be the next step in taking the company to be the recognized leader in the industry. Phoenix Contact has supported the Canadian market for over 25 years with technical and commercial service, sales, logistics, marketing and engineered value-added solutions. Its work is dedicated to the creation of progress with inspiring, innovative solutions and to a trusting partnership towards their customers, sales and distribution partners with common benefits. Founded over 80 years ago in Germany, Phoenix Contact ensures global customer proximity with its 40 subsidiaries and representation in another 30 countries. Their diverse product range includes components and system solutions for industrial and device connection, automation, electronic interface and surge protection.

Reach Phoenix ContACt: 235 Watline Ave., Mississauga, Ontario L4Z 1P3 Phone: (800) 890-2820 • Email: cdinfo@phoenixcontact.ca technical Support hours: Monday to Friday, 8:00 a.m. to 7:00 p.m. (Eastern Time) http://ept.hotims.com/28773-37

Improve your Infrastructure

Reduce your Installation Time with Common Profile UT Terminal Blocks From the world leader in terminal block technology, a connection system perfect for original equipment Manufacturers. CLiPLine Ut offers faster wiring, labeling and troubleshooting for feedthrough, grounding, fusing and disconnect applications.

Reliable Screw Connection Quick and easy installation

• Prevent screw back out with our innovative Reakdyn Principle design. • Quick and reliable patented push-in jumper system. • optional lever-style disconnect matches the height of the fuse block for a perfect profile match. • Corrosion-resistant nickel-plated copper alloy parts eliminate thermal expansion concerns. For additional information please contact: toll Free: (800) 890-2820 www.phoenixcontact.ca http://ept.hotims.com/28773-38

Weidmuller — Connecting with Customers Making the right connection is key to any business.

locking mechanisms. The SL-SMT family includes the

At Weidmuller, we’ve made it our mission to be at

SL-SMarT connectors that allow for the creation of any

The RockStar Series heavy duty connectors provide IP65/66

the forefront of connection technology. With thou-

number of poles with only four part numbers.

rated field wiring for a range of

sands of products that range from terminal blocks

applications. New RockStar HDC

and relays to power supplies, as well as industrial

We continue to expand our extensive signal

Ethernet and wireless products, we offer complete

conditioning line. The new 6mm wide

connectivity solutions.

MicroAnalog isolator series, along with our

types. Each kit contains a

industry leading WaveAnalog family, are

complete connector assembly,

Weidmuller customers have come to expect the very

kits with metric cable entries complement the existing PG

now cULus listed for use in Hazardous

with a single part number for

best in products and services. They come to us

locations. Our WaveAnalog signal conditioners feature

simplified specifying. For the transportation market, the

because they know that they can rely on Weidmuller’s

current loop isolation, as well as a HART protocol ver-

IP68 rated products feature increased corrosion and

strength and expertise to deliver the latest in connection

sion. The versatile WavePro Series includes DC/DC,

impact resistance.

technology.

RTD, Thermocouple, Bridge and Frequency converters, and is complemented by the new Mann Series process

Weidmuller’s industry leading marking systems include

Our on-site services include engineering, custom rail

orientated isolators,

the new PrintJet Pro, the market’s

assembly, electronic development and interface board

totalizers and

first full color printer for MultiCard

design. Our progressive approach to changing trends

displays, and

markers. A full range of MultiCard

and regulations within the industrial and process

ATEX approved

markers is available for terminal

automation markets gives us the knowledge to develop

ACT20X lines.

blocks, wire and cable, as well as

even better solutions to meet customer needs.

other device markers for relays, signal conditioners and standard wires. Using the M-Print ® PRO software, the PrintJet Pro enables rapid and easy labeling of your electrical equipment. Frames, barcodes, graphics or photos are easily incorporated. Weidmuller’s RailDesigner ® 5.0 helps simplify your terminal rail assembly process. Existing features combined with new improvements in version 5.0 provide the most comprehensive environment for custom rail design. Improvements include several data exchange enhancements, a realtime 3D representation and print option, a search and replace feature and an improved printing menu. The 3D image can be rotated and turned in any direction to obtain exactly the right view needed

Weidmuller is a leader in DIN-rail mounted terminal

Weidmuller’s relay offering now

and can be printed or incorporated

blocks. Our selection of screw type SAK and W-Series

includes the new, long lasting

into a CAD system. In addition, the product database

terminal blocks is the industry’s most comprehensive

MICROOPTO solid-state relays, in

has been expanded to include hundreds of new prod-

line-up. The tension clamp Z-Series blocks include the

addition to the MICRO, PLUG and

ucts ranging from terminals

new WeiCoS line, a pluggable system designed specifi-

RIDER Series mechanical relays

and power supplies to

cally for the transportation industry. We continue to

and opto-couplers. The space-saving MICRO Relays

relays and industrial

innovate with Push-In technology. Our P-Series terminals

are cULus listed and Class 1, Division 2 approved.

Ethernet modules.

We’ve expanded our power supply range with two new

We design our

families. The PRO-M line adds a new dimension with

products to be much

Our reputation for excellence in

narrow, high efficiency power supplies for factory

more than functional.

Printed Circuit Board (PCB)

automation and machine applications. With

At Weidmuller, our

connector technology is world-

a slim footprint, starting at only 35mm wide,

goal is to offer solutions that can

wide. Weidmuller’s LSF-SMT is

they can be mounted with no side-to-side

help you save cabinet space, lower

the first SMT compatible PCB ter-

separation. The new T-Series power sup-

installation times, provide touch safe

plies are designed for the demands of

connections and eliminate down time.

can help reduce installation time by as much as 50% when compared with traditional screw terminals.

minal to feature Push-In connec-

CONNECTION TECHNOLOGY

tions. The PowerMate range of high current connectors

process applications and are cULus

offers compact size, high current ratings and integrated

Listed, Class 1 Division 2 approved.

For more information on any Weidmuller products or application assistance, email us at support@weidmuller.ca or visit our web site at www.weidmuller.ca . http://ept.hotims.com/28773-39

s1 Clasv. 2 Di VED RO

APP

GETTING MIXED SIGNALS? Weidmuller signal conditioning solutions puts it all together for you. New! Mann Series— for demanding process applications • Configurable Universal Signal Conditioners • Industrial housings with front panel digital displays, logic, function, isolation, and conversion • Hand-held calibration tools with digital displays

WAVE Series— for complete application flexibility s1 Claisv. 2 D OVED

• Full range of fixed and configurable modules • Isolators, converters, transducers, monitors, timers and more

APP

MICRO Series— space efficient and economical • DC/DC and current converters • Only 6.1 mm wide for high density mounting • DC/DC isolators, RTD, and TC converters

Get Clear Signals with a copy of our Catalog/Selection Guide—

Call 1-800-268-4080 or go to http://signalconditioning.weidmuller.com

Canada:

US:

Mexico:

i n f o 1 @ w e i d m u l l e r. c a 1-800-268-4080

i n f o @ w e i d m u l l e r. c o m 1-800-849-9343

c l i e n t e s @ w e i d m u l l e r. c o m . m x 01 222 2686267

w w w. w e i d m u l l e r. c a

w w w. w e i d m u l l e r. c o m

w w w. w e i d m u l l e r. c o m . m x

http://ept.hotims.com/28773-40

products on review

electronic products and technology • november-december 2010

Renesas opens velocity lab for embedded systems

Quebec tech group looks to accelerate growth

Renesas Electronics America Inc., Santa Clara CA, officially launched Velocity Lab, representing a suite of Renesas and third-party development components designed to enable customers to develop embedded solutions quickly, easily and cost-effectively. Velocity Lab ties together advanced technologies in model-based design, simulation and automatic code generation allowing customers to narrow the gap between design strategy and production while providing the flexibility to create solutions that meet changing market needs. “As electronic control units become more complex and time-to-market demands increase, we have found that designers often have limited flexibility to change components for next-generation systems. The potential of these systems is limited by cost, time and redesign effort,” says Paul Fox, director, segment marketing, automotive business unit, Renesas Electronics America.

During its 20th anniversary celebration bash attended by some 375 guests, Montreal-based Quebec Technology Association (AQT) issued a strong call to action in support of the growth and commercialization of ICT companies. The high tech group took the opportunity to launch “Step into the AQT Accelerator” a new positioning campaign that clearly confirms and highlights the Association’s role as a driving force in the growth of the Quebec Information and Communications Technologies industry. According to association CEO Nicole Martel, AQT is well aware of the impact of economic recovery and international competition on its member companies. “Company executives must take quick action to meet their customer’s needs, grow their markets, and retain a sufficient pool of qualified employees,” Martel says. “They have little time to devote to seeking out financial and professional partners, let alone best practices to improve overall management and increase sales. In doing so, they could miss out on

CSA Group opens new headquarters CSA Group, a worldwide leader in standards, testing and certification and consumer product evaluation services, officially unveiled its new energy-efficient, $14-million headquarters at its recently refurbished location on Rexdale Boulevard in Toronto, where it has operated since 1954. The building was rebuilt in many areas to incorporate state-of-the-art energy-efficient systems and construction while at the same time reusing much of the original infrastructure. “This multi-million dollar flagship building serves not only as our global headquarters, but also as a testament to our strength, stability and foundation. We are a true Canadian success story that has stood the test of time to become a global service provider for the US, Canada and the world,” says Ash Sahi, president and CEO.

Your Canadian Resource For Business Acceleration

business opportunities or risk not having the resources they need to propel their growth.” “This is why companies and their partners need to mobilize. They need to join forces and ensure their voices are clearly heard, and this is precisely where the AQT Accelerator comes in by bringing all of our services together under a single heading,” adds Martel. Designed for companies, CEOs, and respective management teams, the AQT Accelerator provides a venue to meet with peers and future partners and showcase companies.

Digi-Key signs Exar Electronic components distributor DigiKey Corp., Thief River Falls MN, has entered a global agreement with Exar Corp., Fremont Ca, to distribute the firm’s analog and mixed-signal ICs. Exar delivers differentiated silicon, software and subsystem solutions for industrial, datacom and storage applications. Exar’s product portfolio includes power management and interface components, communications products, storage optimization solutions, network security and applied service processors.

ADVERTISERS’ INDEX

3M. . . . . . . . . . . . . . . . . . . . . . . . . 20 Absopulse Electronics Limited. . . .10 Agilent Technologies Canada Inc.. . . . . . . . . . . . . . . OBC

Avnet EM(AZ) . . . . . . . . . . . 7, 26, 27 Canon Communications LLC. . . . . . 42

Central Semiconductor Corp.. . 28, 29 Conec Corp.. . . . . . . . . . . . . . . . . . . 3

June 21-23, 2011 | Toronto Congress Centre | Toronto, ON

Cords Canada Ltd.. . . . . . . . . . . . . 19

Digi-Key Corp. . . . . . . . . . . . 5, 30, 31 Electro Sonic. . . . . . . . . . . . . . . 8, 23 ELMA Electronic Inc. . . . . . . . . . . . 18

EMA Design Automation . . . . . 32, 33 EMX Enterprises Ltd. . . . . . . . . . . . 11 Fibox . . . . . . . . . . . . . . . . . . . . . . . 21

Hammond Mfg. Co.. . . . . . . . . . . . IBC Irwin Industrial Agencies Limited. . . 4

Lista International Corp.. . . . . . . . . 24 LPKF Laser & Electronics. . . . . . . . . . 6

Mouser Electronics. . . . . . . . . . 34, 35 Murata Power Solutions. . . . . . . . . 11 NEWARK. . . . . . . . . . . . . . . . . . . . . 13

Canada’s Premier Event for Advanced Design and Manufacturing Professionals Featuring:

Noren Products . . . . . . . . . . . . . . . 21

• Software

• Contract manufacturing

• Electronic components

• Equipment

ODU USA Inc. . . . . . . . . . . . . . 36, 37

• Subassemblies

• Rapid prototyping

• Motion Control

And much more!

Omega Engineering Inc.. . . . . . . . . IFC Otto Engineering . . . . . . . . . . . . . . 12

Supported by:

Phoenix Contact Ltd. . . . . . . . . 38, 39 Radian Heatsinks. . . . . . . . . . . . . . . 20 Schurter Inc.. . . . . . . . . . . . . . . . . . 10

Co-located with:

TDK- Lambda Americas Inc.. . . . . . . 9

Tech-Etch, Inc.. . . . . . . . . . . . . . . . 16 For information on exhibiting or attending

16718_CN_DM11

Tektronix, Inc.. . . . . . . . . . . . . . . . . 15

DM-CanadaShow.com

Tri-M Systems Inc. . . . . . . . . . . . . . 14

Promo Code: AB

Universe Kogaku America. . . . . . . . 17

http://ept.hotims.com/28773-41

Weidmuller. . . . . . . . . . . . . . . . 40, 41

full online product listings at.ept.hotims.com

http://ept.hotims.com/28773-44

http://ept.hotims.com/28773-42

http://ept.hotims.com/28773-45

http://ept.hotims.com/28773-43

http://ept.hotims.com/28773-46

http://ept.hotims.com/28773-47

Data acquisition just got a lot easier.

More ways to control. More ways to connect. The new Agilent 34972A Data Acquisition Switch Unit takes our best-selling Agilent 34970A to the next level. For starters, you get convenient built-in LAN and USB connectivity. Plus, you can control your data acquisition remotely via Web interface. And transfer logged data to your PC with a simple flash drive. No more expensive adapters and connectors. That’s easy. That’s Agilent.

NEW 34972A

34970A

USB and LAN

GPIB and RS232

Graphical web interface Benchlink data logger software SCPI programming

Benchlink data logger software SCPI programming

3-slot LXI unit with built-in 6 ½ digit DMM $1,845

Agilent and our Distributor Network Right Instrument. Right Expertise. Delivered Right Now.

800-732-3457 testequity.com/agilent

$1,597*

Learn how to connect wirelessly and get more FREE measurement tips at testequity.com/Agilent_DAQ

http://ept.hotims.com/28773-48