Machinery & Equipment MRO November 2010

Page 1

MACHINERY AND EQUIPMENT

Vibration monitoring proves effective on wind turbine Advances in infrared tools make inspections easier Ultrasound dectection helps troubleshoot steam traps

Vol. 26, No. 5

NOVEMBER 2010

How proper shaft sizes are determined 50 ways you can become a better manager EPTDA’s convention breaks attendance records It’s our 25th anniversary!

Predictive Maintenance It all started with a screwdriver

WHAT’S NEW

TEST & MEASUREMENT

MOTORS & DRIVES


2

P R O D U C T

SP TLIGHT

Machinery & Equipment MRO

t

Hydraulic hose selection is quick and easy with mobile app

Reader Service Card No. 328

Garlock has introduced the Klozure Guardian non-sparking, conveyor roller bearing isolator. The nonsparking design prevents the failure mode, and the non-contacting labyrinth design features easy-to-install Cam-Lok o-rings. Offering IEEE 8412001 IP56 rating, the product prevents dust and liquid from entering the bearing housing. The bearing isolators are available in sizes ranging from 0.875 in. to over 30 in., in split or solid, flanged or flangeless, and bearing pillow block configurations. Garlock Sealing Technologies

t

HoseFinder is a mobile application from Parker Hannifin that makes it fast and convenient for customers to search for hydraulic hose products and information on the go. The application features an abbreviated STAMP (Size, Temperature, Application, Media and Pressure) selection process. Using this app, customers can quickly narrow down suitable hoses by choosing the criteria that meet their needs. Once they have identified a product, a Find It option locates the nearest Parker distributor. The product details can also be forwarded to a colleague. Available at no charge at www. hosefinder.com, the app currently is compatible with Apple’s iPhone and RIM’s Blackberry handsets. Android and Windows Mobile versions will be added soon. Parker Hannifin

Non-sparking conveyor roller bearing isolator has long service life

Drive Productivity Agent diagnostic tool, which monitors the status of axis mechanics and notifies the user of wear-related damage before problems with production are experienced or the machine fails. Also, monitoring ensures that the dynamics and precision of the axes are maximized. This software-based diagnostic tool uses the intelligent IndraDrive units as a sensor in parallel to the production process. The software incorporates an active vibration damping and counteracting function, in addition to the diagnostic functions. Bosch Rexroth Canada Reader Service Card No. 327

Reader Service Card No. 324

Diagnostic software keeps equipment up and running

Long-term machine availability is improved by using Bosch Rexroth’s Indra-

Welding safety glasses give all-day comfortable protection

Miller Electric has added safety glasses to its ArcArmor line of welding protection products. Designed for comfort, fit and durability, these stylish glasses are available in three frame colours and

Big Motors. Small Wait.

November 2010

either clear or shade 5.0 lenses. Rubber ear pads and form-fitting orbital eye coverage help to reduce any discomfort that can occur after long periods of use. Protection features include shatter-proof polycarbonate lenses with anti-scratch coating and soft foam eye guards that keep out dust and perspiration. The shade 5.0 glasses, suitable for plasma or oxy-fuel cutting, also feature a reflective outer coating that protects against ultraviolet light. The safety glasses meet ANSI requirements. Miller Electric Mfg. Reader Service Card No. 326

Video communication tool facilitates team work

The Frontline Gateway from AudiSoft Technologies is a collaborative tool that allows live, simultaneous video communication between one Frontline Communicator user and up to 20 other people. Using this technology, team members can share audio, video and data information in realtime directly over an IP network. The session is established between a Frontline Commun icator a nd one or more PCs. Each participant may be at a different location and operate under specific bandwidth conditions. Clients may install the Gateway on their own private network or access it through a public network, or they may use AudiSoft’s hosting services. AudiSoft Technologies Reader Service Card No. 325

Baldor’s new Quick-Ship (QS) large frame AC motor program delivers the large motor you need faster than ever before. The QS program offers a broad list of design options to build a custom motor that fits your application requirements. Available in TEFC, 200 Hp – 700 Hp, and 449 through 5000 frame sizes. Best of all, your QS motors will ship within two weeks from the day you place your order! Plus, any large frame AC motor we have in stock that fits your needs will typically go out the door the same day we receive your order.

• Unmatched Quality • Superior Reliability • Energy Efficient

Rapid custom end machining offered for rolled ball screw line

Lee Linear has announced that it provides fast turnaround of high-quality end-machined precision rolled ball screws. Made from induction case hardened alloy steel, these ball screws are integrally sealed, operate at over 92% efficiency and are

• Made in the USA

Big motors, custom or stock...fast. Only from Baldor. baldor.com

479-646-4711

• QS Program Orders Ship in Two Weeks

available in both inch and metric configurations. They exhibit the long life, smooth motion and high accuracy necessary for close tolerance work. A broad range of sizes and leads is offered in regular, highlead and miniature flange types. Lee Linear

©2010 Baldor Electric Company

Reader Service Card No. 329 Reader Service Card No. 115

MRO


400,000 + square feet of manufacturing space. 400 dedicated employees. 1 unwavering commitment to customer service.

Let one of our application engineers survey your plant and assess your chain drive applications. We inspect chain alignment, take-up, sprocket wear, elongation, and properly matched chain to avoid mis-feeds or jams. Our final report will offer key recommendations on how to improve chain drive performance with documented cost savings to help you run your plant at peak efficiency.

Call 800-435-0782 today to schedule your IN-PLANT SURVEY with an Application Engineer from Drives. Now that’s extreme customer service! Fulto n , I l l I n o I s • P h o n e : 8 0 0 - 4 3 5 - 0 7 8 2 • www.dr IvesInc.com r oller chaIn • c o n v e y o r & e n g I n e e r e d c l a s s c h a I n • Prec IsIon attachment chaIn Reader Service Card No. 116


4

C O N T E N T S

Machinery & Equipment MRO

November 2010

in this issue 19 8 5 - 2 010

features Troubleshooting steam traps / 12

Eliminating failed traps can save large amounts of money. To test steam traps, the two basic pieces of equipment to own are an infrared thermometer and an airborne ultrasonic instrument.

p21

Advances in infrared tools make inspections easier / 15

Interface to asset databases aids in route creation and equipment diagnostics.

Vibration monitoring proves effective on wind turbine / 14

How proper motor and pump shaft sizes are determined / 17

Remote-monitoring system identifies the correct source of a failure, avoiding the unnecessary replacement of bearings.

p12

Consider modifying a shaft only with good engineering support. Even then, remember that the greater the consequence of failure, the more generous the safety factor should be.

editor’s selections ‘With the screwdriver grip against our ear, we determined if bearings were good or bad.’ Jolson Sanford / 21

‘Older equipment was overdesigned by even today’s standards. Of course, that is one reason many of us appreciate older machinery. It was darned reliable!’ Chuck Yung / 17

‘Encourage the people around you.’

p23

Richard G. Ensman, Jr. / 22

‘A typical industrial facility can realize savings of 20% by improving its steam system.’ Bruce Gorelick / 12

Reader Service Card No. 117


5

C O N T E N T S November 2010

Machinery & Equipment MRO

EPTDA’s convention breaks attendance records / 30

At this Malta meeting, more than 280 power transmission and motion control professionals participated in over 750 individual meetings between manufacturers and distributors.

departments Editor’s Notebook / 6 Industry Newswatch / 8 Company Briefs / 10 Mr. O, The Problem Solver / 11 Maintenance Management / 19

p24 p27 columns Maintenance Management: Signals of success / 19

CMMS Solutions / 21 Supervisory Suggestions / 22

p26

MRO On The Road / 30 Product News Product Spotlight / 2 MRO Components / 23 Focus on Test & Measurement / 26 Focus on Drives / 28 Literature Guide / 29

Follow along with Step 35 in a journey to World-Class Maintenance at the Plentya Paper Company. CMMS Solutions: It all started with a screwdriver / 21

The early history of the introduction of vibration analysis technology to maintenance is a fascinating story. Supervisory Suggestions: 50 ways you can become a better manager / 22

MRO New Web Ad

3/31/10 1:53 PM Page 1 These tips for success apply whether you work in an office or on the shop floor.

NEW ❋ PRODUCTS ❋ INDUSTRY NEWS ❋ BUYER’S GUIDE

Improved design makes our website easier to use and more interactive ● ● ● ●

Choose Digital, Print or Both Editions Keyword Searches of Print and Online Archives Quick Links to Advertisements New Online Reader Service Card

LOG ON TO SEE THE NEW

mromagazine.com

p28 Cover photos: Hemera Technologies/ AbleStock.com/Thinkstock


6

E D I T O R’ S

N O T E B O O K

Machinery & Equipment MRO

November 2010

We cover that!

T

his month’s Notebook topic really doesn’t have anything to do with maintenance. I thought instead I’d give you a small insight into our own operations here, as we near the end of our 25th anniversary year. It’s about our covers – some of which show industrial operations, and some of which are abstract concepts that show a bit more imagination (we’ve used both on this issue). Choosing an image for our covers is one of the most time-consuming tasks we face around here at the MRO Magazine offices. In fact, the process of thinking about ideas for the next cover usually spills over into home time. Ideas can come from anywhere – reading a novel, glancing through the business section of

the daily newspaper, chatting to people about seemingly irrelevant topics, and of course, from the vast resources of the Internet – forums, chats, Facebook, Twitter, LinkedIn, YouTube and the like. Our covers are very important because they quickly catch the reader’s eye, and if they look interesting enough – and different from all the other publications that come in the mail – our magazine is more likely to be opened and read. Of course, coming up with a great cover idea is only one step. Then the idea must be executed. Is the concept one that can be photographed? Will it require a creative illustration? Can we communicate our ideas to a creative supplier who may never in his or her life have been in

a mine, a mill or a manufacturing plant? Sometimes, we can’t find just the right solution, so our award-winning art director will work to create a compelling image from a variety of existing parts – two or three photographs that when combined relate to the concept we are trying to convey. Usually, the topic of our cover images is pretty transparent, but sometimes it’s only a hint. Our goal is to create curiosity. After all, printing and sending out a magazine doesn’t make it one that’s read. We feel we need to entice you into picking up each issue, so we want to build curiosity with the graphics and the text and the promise of what’s inside. The cover tells you what kind of content is inside – articles that we expect will be worthwhile for you read. In this issue, for example, our main cover headline, Predictive Maintenance, aims to draw attention to one of the key themes of the articles in this issue. Our

technical articles and case studies look at various applications of PdM tools, including ultrasound, infrared thermography and vibration monitoring. It’s not so easy to illustrate sound waves or vibration, it turns out. Sure, we could have used a product photograph of sound detection equipment, but we wanted to convey the ‘concept’ of sound waves and the useful data they can impart. We think the background behind the downtime detective on our cover is compelling and interesting. We’ve created really interesting covers in the past – in fact, we’ve received Gold, Silver and Top Five awards in national competitions over the years in recognition of our creativity. But those judges weren’t regular readers like you. I’d really like to hear your point of view on this issue’s cover. Are our efforts worthwhile? Send me a quick note at broebuck@mromagazine.com. Bill Roebuck

MACHINERY AND EQUIPMENT

MAINTENANCE, REPAIR AND OPERATIONS

NOVEMBER 2010 Volume 26, No. 5 Established 1985 www.mromagazine.com EDITORIAL

Going green starts with a commitment to the future.

Bill Roebuck, Editor & Associate Publisher 416-510-6749 broebuck@mromagazine.com Ellie Robinson, Art Director Contributing Editors Richard G. Ensman Jr., Simon Fridlyand, Carroll McCormick, Peter Phillips, Angela Webb, Cliff Williams BUSINESS Nick Naunheimer, Publisher 416-510-6868 nnaunheimer@mromagazine.com Eric Achilles Cousineau, Adv. Sales Manager 416-510-6803 eachilles@mromagazine.com Kimberly Collins, Advertising Production 416-510-6779

Did you know? Koyo Seiko was formed in 1921. Today we are part of the JTEKT Corporation with consolidated sales of $10.3 billion and employing more than 33,000 around the world. In January 2010 JTEKT acquired the Torrington® needle roller bearing business from the Timken Company and these products are now available from authorized Koyo distributors worldwide. The Koyo brand supports an extensive array of applications, forming part of the original equipment for many world-class names and is a trusted supplier to industry for the ongoing repair and maintenance wherever anti-friction bearings are required.

Melinda Marasigan, Subscription Enquiries 416-442-5600 x3548

It’s about creating a vision for the future and then communicating that until it becomes a part of your culture. It’s about new approaches to break through old barriers. And it’s about holding true to your commitment when challenges arise.

Machinery & Equipment MRO is published six times a year to help improve the effectiveness, productivity and practical knowledge of maintenance professionals in Canada’s manufacturing, utilities and resource industries.

Koyo continues to research, develop and deliver products that consume less energy, last longer and lighten their load on the environment. Since 2005 we’ve reduced the CO2 output per unit in manufacturing by 30% and since 2008 reduced our CO2 footprint in logistics by 31%.

Editorial & sales offices: 12 Concorde Place, Suite 800, Toronto, ON M3C 4J2; tel: 416-510-6868, 1-800-268-7742; fax: 416-510-5134. Subscription rates. Canada: 1 year $55.95, 2 years $88.95. United States: 1 year $82.95. Elsewhere: 1 year $82.95. Single copies $10 (Canada), $16.50 (U.S.), $21.50 (other). Add applicable taxes to all rates. On occasion, our subscription list is made available to organizations whose products or services may be of interest to our readers. If you would prefer not to receive such information please contact us via one of the following methods — phone: 1-800-668-2374, e-mail: privacyofficer@businessinformationgroup.ca, fax: 416-442-2191, mail to Privacy Officer-Business Information Group, 12 Concorde Place, Suite 800, Toronto, ON Canada M3C 4J2.

In 2009 alone we reduced energy consumption in manufacturing by 14%, raw materials by 20% and CO2 emissions in logistics by 16%; all this while maintaining production levels. Here are some of the many targets we are working towards achieving this year: Zero landfill waste; 90% reduction of 2001 levels of incineration waste; 30% reduction from 2003 levels of overall waste per unit; 5% increase in manufacturing efficiency per unit and 5% reduction in weight per unit.

©2010. Contents of this publication are copyright and may not be reproduced in whole or in part in any form without written consent of the publisher. The publisher cannot assume responsibility for the validity of claims in items reported or advertised.

For a copy of Koyo’s Corporate Social Responsibility report please visit www.koyo.ca

Machinery & Equipment MRO is published by BIG Magazines LP, a div. of Glacier BIG Holdings Company Ltd. Bruce Creighton, president, BIG; Alex Papanou, vice-president, BIG.

Making bearings since 1921.

Publications Mail Agreement No. 40069240. Return postage guaranteed. ISSN 0831-8603 (print). ISSN 1923-3698 (digital). Return undeliverable Canadian addresses and change of address notices to: MRO Circulation Dept., 12 Concorde Place, Suite 800, Toronto, ON M3C 4J2 .

Reader Service Card No. 118

www.koyo.ca Torrington® is a registered trademark of the Timken Company

Koyo Canada Inc. 5324 South Service Road Burlington, Ontario L7L 5H5 Tel: 1.800.263.5163 Fax: 1.877.326.5696 Email: burlington@koyo.ca

MRO, USPS 012-846 is published six times per year by Business Information Group. US office of publication: 2424 Niagara Falls Blvd., Niagara Falls, NY 14304-0357. Periodicals Postage Paid at Niagara Falls, NY. US postmater: Send address changes to Machinery and Equipment MRO, PO Box 1118, Niagara Falls NY 14304.

Audit Bureau of Circulations Member/Canadian Business Press

PEMAC

We acknowledge the financial support of the Government of Canada through the Canada Periodical Fund (CPF) for our publishing activities.


Reader Service Card No. 119


8

I N D U S T R Y

N E W S W A T C H

Machinery & Equipment MRO

November 2010

©iStockphoto/Thinkstock

Manufacturing sales up 17.6% from previous low

Higher sales were seen in 15 of 21 industries in August.

Ottawa, ON — Manufacturing sales increased 2.0% in August 2010 to $45.1 billion, Statistics Canada reported in its latest available Monthly Survey of Manufacturing. Gains were widespread across industries; however, the main contributors to the increase were motor vehicle, and petroleum and coal product manufacturers. Higher sales volumes were responsible for most of the gain. With the increase, manufacturing sales were 17.6% higher than their most recent low, reached in May 2009. Compared to July, constant dollar manufacturing sales increased 2.1% in August. Higher sales were seen in 15 of 21 industries, representing 81.8% of total sales. Sales increased in Ontario, Quebec, Saskatchewan, Alberta and Nova Scotia. Inventories levels increased 1.3% in August to $60.0 billion. The rise in inventories over the past three months

has reversed a decline that occurred from November 2009 to May 2010. As well, unfilled orders rose 1.5% to $54.7 billion in August. The backlog of orders at manufacturing plants across Canada has been gradually increasing since November 2009.

Despite a variety of economic and business challenges — including those of the recent recovering economy — BSA has continued to deliver networking and problem solving within the bearing industry. Both the 2010 Annual Convention and the 2010 Fall Meeting set new attendance standards. BSA anticipates the same response to the 2011 Annual Convention. Convention planning is well under way for business programs and social events to develop and enhance the industry-specific relationships that are the basis for BSA. As always, the annual event will feature industry updates from the American Bearing Manufacturers Association (ABMA), and the Conference Tables Session, which features pre-scheduled and planned conferences between distributors and manufacturers designed to resolve issues of mutual concern. The Hyatt Regency Lost Pines, located along the Colorado River, is just 32 km from Austin, offering luxury accommodations, ample outdoor recreation and complimentary children’s activities. Lost Pines is a Four Diamond resort located in a rugged, historic Texas setting. The resort’s Wolfdancer Golf Club (ranked by Golfweek in its list of Top 100 Resort Courses) is just steps from the lobby entrance. For more information, contact the BSA office at 630-858-3838; e-mail info@ bsahome.org or visit www.bsahome.org.

BSA’S ANNUAL CONVENTION TO CELEBRATE 45TH YEAR

WSIB RAISES ITS RATES TO TACKLE $12 BILLION IN UNFUNDED LIABILITIES

Glen Ellyn, IL — In 2011, the Bearing Specialists Association (BSA) will celebrate 45 years of successfully bringing together the top-level executives of what is now a $5.6-billion bearing industry in an annual convention designed for networking and knowledge sharing. The association’s 2011 Annual Convention, with the theme ‘Growing Together: 45 Years Strong’, is planned for April 29-May 3 at the Hyatt Regency Lost Pines, near Austin, TX.

Toronto, ON — Ontario’s Workplace Safety and Insurance Board (WSIB) is moving forward with a Funding Review to ensure its long-term financial stability. The year-long review will gather expert advice and input from workers, labour and employers on a range of public policy issues relating to the WSIB’s financial future, including a plan on how to eliminate the WSIB’s unfunded liability. To provide business with certainty and stability during the course of these

consultations, and in order to help slow the growth of the WSIB’s projected unfunded liability (UFL), the average premium rate will increase by 2% for 2011 and 2012. The UFL is the difference between the total cost of claims in the system and the funds in the system to pay for them. It has increased due to insufficient premium revenue, rising claims and health care costs, and declining investment returns following the recent economic downturn. Currently the WSIB’s projected UFL is more than $12 billion. The WSIB is also making a number of internal administrative changes that will address the UFL while improving customer service and operational efficiency. This includes a Value for Money Audit of the claims and adjudication process. These actions, along with the modest premium rate increases, will assist in balancing annual revenue with claim costs. “We are taking important steps in ensuring that the workplace safety and insurance system is financially stable now and for future workers and employers,” said WSIB president and CEO David Marshall. “These steps, along with our continuing commitment to accountability and fiscal responsibility, will steer us toward our goal of achieving full funding, while preserving workers benefits and ultimately lowering employer premiums.” The average premium rate will rise from $2.30 to $2.35 for every $100 of insurable earnings in 2011 and to $2.40 in 2012. This is well below the average premium rate of $3.00 in the mid 1990’s. The increase is being applied to the average premium rate, meaning more than half of registered employers will see little to no increase, while other employers in high-risk industries with a history of costly injury claims may see increases of more than 2%. Employers with good safety records will continue to be eligible for rebates under the WSIB’s incentive programs. More details can be found on the WSIB’s website at www.wsib.on.ca.

IFPE RETURNS TO LAS VEGAS IN 2011

For all those who need to set things in motion...

KTR Corporation ● 122 Anchor Road ● Michigan City, IN 46360 ISO 9001:2008 CERTIFIED Phone: 219-872-9100 ● Fax: 219-872-9150 ● email: ktr-us@ktr.com

...KTR has the solution for you.

www.ktr.com

Reader Service Card No. 120

motors

MaxMotion 1HP to 300HP NEMA Premium Efficiency Motors

— Quality motors for every application

MaxMotion Three Phase, All-in-One 56C Frame w/removable feet

MaxMotion 1HP to 50HP JM-JP Close Coupled Motors

MaxMotion 1/3HP to 20HP Stainless Steel Motors

* Availability * Expertise * Warranty * Complete product benefits at www.motors.mep.ca 1-877-812-7788 Reader Service Card No. 121 MEP.indd 1

10/7/10 2:27:26 PM

Chicago, IL — The International Exposition for Power Transmission (known as IFPE) will be held at the Las Vegas Convention Center in Las Vegas, NV, from March 22-26, 2011. IFPE is an international exposition and technical conference devoted to power transmission/motion control and fluid power, as applied through hydraulic, pneumatic, electrical and mechanical technologies. It is held every three years. IFPE 2011 will be co-located with Conexpo-Con/Agg 2011, the largest international gathering place for the construction industry. The Power Transmission Distributors Association (PTDA) will host a pavilion to help member companies build their brands and business with customer audiences at IFPE. Space in the PTDA Pavilion frequently sells out well in advance of the show. It helps exhibitors secure prime space that offers more prominence and increased presence than exhibiting on their own. PTDA members can take advantage of a 15% discount off the non-member rate at IFPE 2011 by exhibiting in the PTDA Pavilion. Space rates include drayage, pipe and drape, directory and basic Virtual Trade Show listings and free marketing materials. More than 2,100 sq ft of space has already been sold in the PTDA Pavilion for 2011. For more information on IFPE, visit www.ifpe.com.


I N D U S T R Y

9

N E W S W A T C H

November 2010

Machinery & Equipment MRO

RESOURCE HELPS WITH DEVELOPING DISTRIBUTOR/ MANUFACTURER AGREEMENTS Chicago, IL — Identified by members of the Power Transmission Distributors Association (PTDA) as one of the top 10 issues between a distributor and manufacturer, PTDA has created a comprehensive distributor/manufacturer agreement template focused on the elements that need to be considered when entering a formal relationship. ‘Guidelines for Developing a Distributor/Manufacturer Agreement: A Components Checklist’ is a resource for outlining the parameters of a mutually profitable partnership. Rex Davis, vice-president supply chain, warehouse and aerospace division, IBT Inc., served as chair of the task force charged with developing the guidelines. “PTDA is an association of both distributors and manufacturers,” he said. “We need to work together to deliver solutions to our mutual customers. To do that effectively, we have to be solid in our business relationship and understand what each of our strengths are. “We analyzed these guidelines from many different perspectives: small, midsized and large companies, distributors and manufacturers, and relationships and processes. The input we received from PTDA manufacturer and distributor members throughout the development process influenced the committee to create a usable resource that is relevant to all of our members.” The guidelines include practical, customizable language for 38 contract claus-

es grouped in six main sections: introductory clauses, terms and conditions clauses, product and price policy clauses, sales policy clauses, inventory clauses, and concluding clauses. Developed using sample agreements from many of PTDA’s member companies, each clause includes a description of when the clause may be applicable and provides sample language to use in writing a mutually acceptable contract. The guidelines include a Microsoft Word document, allowing one to edit, delete or add to each of the sample clauses. “Communicating on important issues and laying out the expectations in advance with our distributors make it possible for us to focus our joint efforts on helping the customer,” said task force member Dennis Tanrikulu, vice-president of aftermarket sales for NTN Bearing Corp. “A written agreement that addresses all of those details allows us to spend our time on the activities that drive profitability for both of us. These guidelines will help both parties ensure that each of the components of an agreement are discussed and negotiated before an issue can arise.” The guidelines are available for purchase at US$349 for non-members at www.ptda.org/agreement. PTDA member companies can download the guidelines at no charge.

NEW QUARTERLY BUSINESS INDEX REVEALS GROWTH FOR PT/MC MARKETS Chicago, IL — The inaugural Quarterly Business Index recently released by the Power Transmission Distributors Associ-

PTDA Quarterly Business Index: 2nd Quarter 2010 All Respondents

Distributors

Manufacturers

Business Activity

82.1

73.1

89.2

New Orders

81.8

75.4

86.9

Employment

67.8

59.6

74.4

Supplier Deliveries

76.3

76.5

76.1

Inventories

54.4

51.3

56.8

Prices

72.9

77.2

69.5

Backlog

79.2

67.0

88.8

Overall PTDA Index

77.0

71.1

81.6

This table shows an overview of the results and provides a breakout reading by distributor and manufacturer of the PTDA Quarterly Business Index.

ation (PTDA) shows rapid expansion for the power transmission/motion control (PT/MC) industry in the second quarter of the year. The overall reading of the association’s distributor and manufacturer members revealed an impressive score of 77.0, where a reading above 50 indicates growth. Conducted jointly by the PTDA and Cleveland Research Company, the new PTDA Quarterly Business Index was modelled after the widely respected Purchasing Managers Index and tracks change in business activity, new orders, employment, supplier deliveries, inventories, prices and backlog in the PT/MC market to arrive at an overall index. The initial survey showed a robust response, with 122 companies participating — comprising 55 distributors and 67 manufacturing firms. A comparative review of the results reveals that manufacturer respondents are expanding at a more aggressive rate with an index of 81.6, with distributor respon-

dents showing a growth index of 71.1. In addition to improving sales and production, the survey results also anticipated continued strength in the near-term. Participants were also asked to provide their perspective on the remainder of 2010. The positive momentum in the survey results appears to be reflected in the full-year outlook, which calls for 12% growth in sales on average. This comprises expectations for 8% growth on average for distributor participants and 16% growth for manufacturers. The Quarterly Business Index is available at no charge through at www. ptda.org/index. The full report includes US and Canadian breakout data, as well as distributor and manufacturer expectations in business activity, new orders, employment, supplier deliveries, inventories, prices and backlogs. MRO More detailed versions of these stories, along with many additional news items, can be found online at www.mromagazine.com.

www.ca.nsk.com 1.877.994.6675

When you think “Performance”, you think about bearings that can take the heat. We think about maximizing uptime and lowering maintenance costs with quality components supported by 24-hour service and worldwide distribution. For motion and control products that deliver world-class performance in the toughest conditions, Think NSK.

B A L L

B E A R I N G S

|

R O L L E R

B E A R I N G S

|

L I N E A R

M O T I O N

Reader Service Card No. 122

P R O D U C T S

|

T E C H N I C A L

S E R V I C E S


10

I N D U S T R Y

Machinery & Equipment MRO

Company Briefs

N E W S W A T C H November 2010

bia and southern Alberta signed a long-term agreement • For the record, at the Power for Linde to supply liquid nitroTransmission Distributors Assogen for the cryogrinding prociation’s Canadian Conference cess at Liberty’s Brenner, ON, in Montreal in June 2010, NTN rubber plant. Linde is part of a Canada’s Paul Meo, who dressed worldwide gases and engineer• Can-Ross Environmental Services company from an early age in both manup in a flashy pink suit and hat at ing company. Liberty Tire and Paul Meo, Ltd., Oakville, ON, has been operating ufacturing and sales roles. His is now a reception as a fundraising stunt, Rubber is a producer of crumb NTN Canada as a family-run business since 1985 and national sales manager. raised more than $6,000 for canrubber in the US and Canada. celebrated its 25th Anniversary on OctoCan-Ross has a network of distribucer research from PTDA delegates To produce crumb rubber, ber 15, 2010. Ted Edgar says he started tion partners and currently distributes (we inadvertently dropped a ‘0’ when it is necessary to reduce the size of the Can-Ross with a vision and a purpose. to over 400 outlets across Canada. The we reported the amount in our previous tire shred or chip. This is accomplished “Looking back on that vision 25 years company’s plant and head office curissue). by techniques called cryogenic grindlater, we can now say we are on the right rently encompasses 30,000 sq ft in the • Commtest Instruments Inc., Knoxing. Cryogenic processing refers to the path in providing sustainable value to Oakville operation, and it maintains a ville, TN, has been awarded a five-year use of liquid nitrogen (−196°C) to freeze both our distribution partners and enddistribution centre in Calgary. United States General Services Admintire chips prior to size reduction. The istration (GSA) contract and is now users. Our belief has always been that a • Ray Cowan has joined the Western rubber is immersed in liquid nitrogen to listed on GSA’s Schedule 66 as a Small good deal has to be good for all in order Canada sales team of Advantage Sales reduce the temperature of the tire chip. Business entity. Commtest is contracted for any business arrangement to stand Network Corp., Brampton, ON. He has The cooled rubber is then ground in an to provide scientific equipment, specifithe test of time.” many years of electrical sales experience impact-type reduction device. cally vibration analyzers, for the prevenThe company’s focus is on spill control in the western provinces. He is based in • Crown Point Productions, the protive maintenance of rotating machinery. ducers of the television show World’s and containment products. Ted serves as the company’s regional sales office in Cal• Linde Canada, Mississauga, ON, Greatest!, has recently selected Viking the company’s president and CEO and gary. Cowan will be responsible for the and Liberty Tire and Rubber have Pump, Cedar Falls, IA, to be a part of the his son, Terry, has been involved with the sales activity in southern British Columpopular television series. “Viking Pump is exactly the type of company that we like to feature on World’s Greatest!” said Gordon Freeman, executive producer of the show. “They’re an innovative company that Industrial Components & Services is preparing to mark their 100th Anniversary in 2011. They have plenty to offer, including their unique ability to produce custom pumps, built to order based on the customer’s mission-critical dimension, flow, pressure, viscosity, temperature requirement, or mounting feature application.” World’s Greatest! is a 30-minute show dedicated to highlighting the world’s greatest companies, products, places and people. Each show is a tour featuring behind-the-scenes footage, interviews and visuals. For information on the show lineup, visit www.crown-tv.com. • Thompson Pump & Manufacturing Co. Inc., Port Orange, FL, a family-owned manufacturer and provider of pumps, pumping equipment and engineering expertise, has achieved ISO 9001:2008 quality recertification for its Port Orange manufacturing facility. The new certification represents an enhancement to the company’s previous ISO 9001:2000 classification. Thompson produces heavy-duty lines of portable pumps, ranging in size from 2 in. to 18 in. In addition, Thompson provides engineering services and special applications consulting for complicated wellpoint, bypass or multiple pump systems; and offers pump and dewatering education and training through its Pumpology courses. The company is also aligned with more than 30 distributors in the US, Canada, and South America. • Eaton Corp., Eden Prairie, MN, has announced the completion of Eaton’s Hydraulics Instructor Symposium, an Bearings, Gaskets Industry Expertise Today’s mining companies are event designed to expose hydraulics & Unit Blocks operating in a volatile market industry leaders involved in academic Bulk Material Handling Service & Repair Centres where production optimization, and commercial training operations to Conveyor & Belt Components the latest in both emerging hydraulic cost reduction and operational 24/7 Emergency Service technologies and instructional meth Cylinders & Valves efficiency are of the essence. odologies. Hosted at Eaton’s Hydraulic Filtration Products Competitive Prices Training Center in Maumee, OH, the Gear Motors & Speed Reducers With more than 60 specialized symposium was attended by represen Hydraulic Hose, Cost Savings Programs engineers across Canada, tatives of Alexandria Technical College, Adapters & Fittings Kinecor responds to the unique The University of Dayton, and Alfred Hydraulic Pumps & Motors College as well as training executives challenges of the mining Lubricants, and instructors from Eaton’s customers industry. Sealants & Abrasives and distributors across North America. Process Pumps Among the subjects presented at the Symposium were a CANbus primer, systemic contamination control, thread identification, cavitation and aeration, principles of proportional valve opera1.866.KINECOR • WWW.KINECOR.COM tion, hose assembly, proportional valve Bearings & Power Transmission • Hydraulic Components & Systems amplifier tuning and troubleshooting, Process Equipment • Material Handling • Safety & PPE • Mill Supplies fixed and variable pump controls, causes Reader Service Card No. 123 and cures of leaks, plus an introduction

News and views about companies, staff, product lines and more.

Kinecor Solutions


I N D U S T R Y

11

N E W S W A T C H

November 2010

to IEC 61131-3 compliant programming. Attendees also witnessed a demonstration of HTS-2 technology Eaton’s Hydraulics Group provides solutions under product names such as Aeroquip, Boston, Char-Lynn, Eaton, Hydro-Line, Synflex, Vickers, Walterscheid and Weatherhead. • While economic cycles may move slowly, the pace of social media access to valuable industrial and high-tech resources is quickening. Kennametal Inc. of Latrobe, PA, a supplier of tooling, engineered components and advanced materials for manufacturing and mining industries, is among the pioneers in this effort. It has released an interactive catalogue app for Mr.0 The Practical Problem Solver

Using a stroboscope to diagnose belt drive problems Problem: How can I determine what’s wrong with a belt drive system without stopping production? Solution: A stroboscope is a wonderful diagnostic tool for belt drives. With a stroboscope light you can: • Read the original belt’s number and manufacturer without stopping the machine: Run the strobe at the belt’s speed and the fast-moving label and manufacturer name will appear to stop. • See if one in a series of belts are slipping: Shut down the equipment, chalk or paint a mark across all belts, start the equipment, and calibrate the strobe to the running speed of the sheave. A slipping belt will slow down and separate from the others, as you’ll see from the mark on it. • Check multi-belt drives for misalignment: If the belts from the example above present a step-type pattern, the sheaves are misaligned. The belt with the most load slips the least. • Check if a v-belt is worn out. Shine the strobe at the sheaves. Check for shiny groove bottoms, which mean that the belt or the sheave is worn out and the belt is riding on the bottom instead of on the walls. The methods above require that you have see-through guards, an inspection lid or inspection hole. For the greatest visibility, the guard cover should be of expanded metal painted matt black and the sheaves and inside of the cover should be painted in two contrasting bright colors. With this configuration the guard cover will become invisible in a strobe light. As always, make sure you observe all applicable safety regulations and procedures, and work safely. Mr. O’s thanks for this tip go to Idcom. For more tips, visit www.idcom.com. Do you have a solution for a maintenance problem? Send it in and if it’s published, we’ll send you a Mr. O Problem Solver T-shirt. Include your address, telephone number, print complete details and, if possible, add a sketch to help explain your tip. Send your tips to Mr. O, Machinery & Equipment MRO, 12 Concorde Place, Suite 800, Toronto, ON M3C 4J2.

Machinery & Equipment MRO

the Apple iPad platform. Users can conveniently download any and all of Kennametal’s numerous product catalogues and review products and specifications, request quotes, view engineering drawings or videos, or contact technical support for more information. This app is available for download through iTunes at no cost. • Ameridrives Couplings, Erie, PA, has launched a new corporate website that provides information about its full line of coupling products, including Amerigear gear couplings and mill spindles, Ameriflex diaphragm couplings, and Ameridisc high-performance disc couplings and universal joints. The website, www.Ameridrives.com, contains specific product features and benefits as well as information on the patented Amerigear crowned gear tooth design and Ameridisc advanced disc technology. A link allows quick access to brochures, catalogues and service manuals, available as PDF downloads. • Steven J. Smidler has assumed the role

Website offers product catalogue and service manual downloads.

of president of the Kaman Corp. subsidiary, Kaman Industrial Technologies Corp. (KIT), Bloomfield, CN. He succeeds T. Jack Cahill, who has retired. Smidler, 51, joined Kaman in December 2009 as senior vice-president and chief operating officer of KIT. He joined the company from Lenze Americas Corp., where

he served as executive vice-president. • The Weir Group PLC, Madison, WI, and J. F. Comer Inc., Uxbridge, ON, have jointly announced the settlement of a long-running contested legal dispute between the parties in the Federal Court of Canada concerning Weir’s intellectual property rights in that country. The settlement has immediate effect. At one time Comer was an official distributor in Canada for certain slurry pumps and parts now owned by Weir and branded as Hazleton, Ash Pump, Galigher or Warman, but this relationship ended some years ago. Under the present settlement, Comer has agreed to ensure that any products, parts, retrofit or kit components that they may sell are not sourced from replica manufacturers who illegally make use of the intellectual property of Weir in any manner. Comer has agreed not to import such products into Canada from specific replica manufacturers located in China. MRO

ONE ONE SOURCE ONE SYSTEM ONE SOLUTION

Hydraulic Hose, Fittings and Equipment Whether the application is construction, mining, agriculture, manufacturing or transportation, we have the hose to meet and exceed the diverse needs of our customers. Veyance Technologies is your one source, one system, one solution provider with innovative hydraulic hoses and products that meet major global standards. For more info, call 1-888-275-4397, or visit www.goodyearep.com The GOODYEAR (and Winged Foot Design) trademark is used by Veyance Technologies, Inc. under license from The Goodyear Tire & Rubber Company. Goodyear Engineered Products are manufactured and sourced exclusively by Veyance Technologies, Inc. or its affiliates. ©2009 Veyance Technologies, Inc. All Rights Reserved.

Reader Service Card No. 124


12

F O C U S

O N

T E S T

&

M E A S U R E M E N T

Machinery & Equipment MRO

November 2010

Troubleshooting

ing across the head and seat of a wiredrawn inverted bucket trap. After all, hearing is believing.

Traps

Before you begin Before you spend your hard-earned money, consider some of the characteristics of ultrasound instrument. Ask the following questions: • How is the sound quality heard through the headphones? (External speakers will be hard to use in most steam environments.) • Does it lack in versatility? (Will it in-

Eliminating failed traps can save large amounts of money. To test steam traps, the two basic pieces of equipment to own are an infrared thermometer and an airborne ultrasonic instrument. BY BRUCE GORELICK & ALAN BANDES

P

roperly functioning steam traps open to release condensate and automatically close when steam is present. Failed traps waste fuel, reduce efficiency, increase production costs and compromise the overall integrity of the steam and condensate systems. That’s why traps should be tested on a regular basis — or the neglect may be quite costly. Steam energy conservation is important to the economy. Consider that: • Over 45% of all the fuel burned by US manufacturers is consumed to raise steam. Steam is used to heat raw materials and treat semi-finished products. It is also a power source for equipment, as well as for building heat and electricity generation. But steam is not free. It costs approximately $18 billion annually to feed the boilers generating steam in the United States (all figures in US dollars). • Many manufacturing facilities can recapture energy through the installation of more efficient steam equipment and processes. A typical industrial facility can realize steam savings of 20% by improving its steam system. If steam system improvement were adopted industrywide, the benefits would be $4 billion in fuel cost reduction and 32 million metric tons of emission reductions. (Source: US Department of Energy, Energy Efficiency and Renewable Energy.) Why do steam traps fail? Obviously, anything mechanical will malfunction; steam traps are no exception to the rule. Proper maintenance improves longevity and helps reduce maintenance costs. There are three general conditions that adversely affect traps: A. Dirt is by far the leading cause of failure, resulting in either a leaking or plugged trap. B. Pressure surges (due to sudden steam valve openings, improper piping, or trap misapplications), resulting in waterhammer and subsequent damage to the internal steam trap components. C. Over-sizing of IB (inverted bucket) traps can cause them to lose their prime, while TD (thermodynamic) traps can experience rapid cycling. Warning signs How do we keep problems to a minimum and keep energy costs in check? One simple way is to look for warning signs. Let’s review the most evident signs that should signal a distress call from your steam system. 1. The once-lazy plume from your condensate stacks is now an out-of-control freight train. The steam coming from your stack like a soldier standing at attention is costing you dearly. 2. Condensate back pressures that have slowly been rising have been causing your electric condensate pump to selfdestruct. High-temperature condensate

Above: In this application, after an ultrasonic test found the trap to be blowing, the downstream condensate line was shut and the test valve was opened to verify test results. The system pressure was 270 psi. At the cost of $10 per thousand pounds of steam produced, the energy loss for this single blowing trap was a whopping $21,000. Right: A 600-psi-rated steam trap is being ultrasonically tested.

cannot be handled by conventional electric pumps. Temperatures over 212ºF cause conventional electric condensate return pumps to cavitate. Motors burn out and mechanical seals begin to leak when steam is present. 3. Pressure-reducing valves (PRVs) or control valves fail to maintain set pressures. Fully or partially plugged traps prevent condensate from being eliminated from the steam space. Undrained condensate at PRV stations will back up into the steam line and will wiredraw the heads and seats of the reducing valves. Wiredrawing is when high-velocity water in the steam system cuts (scores) the surfaces of heads and seats. Even small microscopic cuts will prevent the proper operation of these valves. 4. A production capability has been reduced. Open or closed traps that have failed will have a negative impact on production. Plugged traps will back condensate up into the process and dramatically reduce system efficiency. Blowing and leaking traps are costly to production due the added and unnecessary energy consumption. 5. Pipe wall thickness of the condensate system has become an issue. Fully open or partially opened steam traps that are not repaired in a timely manner will deteriorate the condensate return piping. Some of the early warning signs begin with steam leaks. 6. The cost to maintain heat exchanger bundles, humidifiers, HVAC coils and other equipment has dramatically increased. Failed traps will prevent proper operation of sensitive equipment. When steam traps fail in a closed position, over time the stagnant condensate will turn to carbonic acid (H2CO3). Carbonic acid will deteriorate all the metal it comes in contact with. Beyond increased energy consumption, failed open traps will also cause control and efficiency issues. 7. Water hammer can develop in neglected or mismanaged steam and condensate systems. Water hammer literally sounds like someone is hitting a pipe with a hammer. In some cases water hammer can occur when a portion of the steam condenses into water within steam piping. Left undrained, condensate will spill into the steam system and begin to accumulate. Eventually a wave of water will be created. This slug of water can be carried at high velocity until it reaches an obstruction like a closed valve, a lower elevation, or a sudden change of direction. A trap that is blowing steam can also cause water hammer. Blowing traps create back pressure in the condensate system piping. If condensate piping is already undersized, the problem will be compounded by the additional pressures found by the faulty traps. Undrained condensate can back up into the steam distribution piping. From the

Failed steam traps …

standpoint of plant clude the ability to safety, it is essential change frequencies and • Waste energy to test and maintest modules?) • Adversely affect production tain the steam trap • Is it heavy and/or population. Type awkward to handle • Increase maintenance costs “steam water hamwhen up on a ladder? • Create safety issues mer accidents and • Does it have an extendfatalities” into a ed warranty period? search engine; the results should be con• Is there proper technical support via vincing enough to create an immediate acphone or in the field? tion plan. • Can batteries be easily charged and replaced? The action plan • Are trial rentals available? • Perform a regularly scheduled steam Purchasing an ultrasound device trap survey. should take intelligent consideration. • Identify system design issues. The instrument must be capable of pro• Perform an insulation audit. Areas viding you a clear and discernable signal where insulation has been removed and quality. Labour hours and equipment never replaced will significantly add to costs depend on it. your overall steam production costs. • Using ultrasound detection equipment, Why use ultrasound to test traps? test bypass valves if they exist in your Of all the inspection methods, ultrasteam system. They may be leaking sound is often the most recommended through when they ought to be shut. and reliable. Ultrasound is a shortwave, • Turn off seasonally operated equiphigh-frequency signal that does not travment, such as unit heaters. el far from its source. By listening to the • Periodically test control valves or shutultrasonic components of a working off valves in the HVAC system with a steam trap, a user can isolate the signal handheld IR temperature instrument and easily identify operational sounds. and an ultrasonic leak detector. If they Ultrasonic testers translate high-freare even partially leaking through, they quency emissions generated from the meare adding to overall energy costs. chanical and fluid flows of traps into the • Audit the system and unused inventory audible range where they are heard equipment. Remove defunct systems. through headphones and seen as inten• Whenever possible and practical, use a sity levels on a meter. Some units have computerized system to control and monfrequency tuning to filter out additional itor processes. signals and to tune in to the sounds of steam and condensate. Purchase proper test equipment Testing steam traps with ultrasound Even if outside technical professionals provides results in real time. It isolates are contracted to test the steam system, the area being tested by eliminating confrom time to time, a problem will occur. fusing background noises. A user can Time is money. Having the proper equipquickly adjust to recognizing differences ment and just one trained employee can among various steam traps. avoid costly downtime. The ultrasonic detector may be easy to The two basic pieces of equipment to use, flexible and accurate among sound own are an infrared thermometer and an testing methods. However, the ultrasonic airborne ultrasonic instrument. Such instrument cannot tell if a trap is cold or equipment is readily available in all price blocked. Therefore, first use a temperaranges. A thermometer with simple feature indicator instrument to be certain tures is fine; however, an ultrasonic listenthat the system is operating. Then use ing device should be selected more carethe ultrasound instrument to determine fully and must have a clear signal quality. if the trap is partially blocked or if backThis is similar to purchasing an audio pressure exists at the trap's outlet. MRO system for your home and comparing one Bruce Gorelick is vice-president at Enerset of speakers to another set. When lischeck Systems, Charlotte, NC. Alan tening to a quality speaker system, the Bandes is vice-president of marketing for nuances of what was actually recorded UE Systems, Elmsford, NY. For more inopens your ears to new level of listening. formation, visit www.enerchecksystems. The same is true of listening to a steam com and www.uesystems.com. trap. With a fine instrument you can even Reader Service Card No. 401 hear the snap-crackle-pop of steam pass-

C

M

Y

CM

MY

CY

CMY

K


Stainless Steel Motors Brake Motors 2 Speed Motors Single Phase Motors

Forced Vent Motors Explosion Proof Motors Permanent Magnet Motors Servo Motors

We do metric best. Lafert North America’s success is based on three key ingredients: Quality, Versatility and Service. We stock the widest range of IEC metric equipment including induction motors, coolant pumps, and metric gearboxes. With our wide line of products, numerous locations throughout North America, flexibility in providing custom work and 24/7 service, we will reduce your downtime and most importantly your customers’.

www.lafertna.com sales@lafertna.com

Toll Free: 1.800.661.6413 U.S. & Canada Fax: 1.905.629.2852 Reader Service Card No. 125

5620 Kennedy Rd. Mississauga, ON L4Z 2A9 Canada


14

F O C U S

O N

T E S T

&

M E A S U R E M E N T

Machinery & Equipment MRO

November 2010

Vibration monitoring effective on wind turbine

Remote-monitoring system identifies the correct source of a failure, avoiding the unnecessary replacement BY FRÉDÉRIC CHAMPAVIER of bearings.

T

his case study is a concrete example of the benefit of a vibration monitoring system with remote access on an isolated machine. A wind turbine is an excellent example of such an isolated machine, with difficult access as well. The equipment is a wind turbine with a rated power of 600 kW that was commissioned in 2000 on a wind farm near Narbonne, France. It is a Stall Control

type of machine, using an asynchronous generator with a double winding, running at two fixed speeds, 1,000 rpm and 1,500 rpm, depending on the wind speed. Since 2006, this machine has been equipped with a OneProd Wind System, a continuous vibration monitoring system. The measurements are remotely processed by a local service provider that specializes in the monitoring of rotating machines, with the assistance, when required, of the

Let us help you save time and money! YOUR SAFEST, MOST EFFICIENT ALTERNATIVE TO TOXIC SOLVENT PARTS WASHING! Bio-Circle is a complete, cost-effective and hassle-free solution which: � Cleans your parts without risks of health hazards. � Comes with a complete on-site maintenance program performed in 21 precise steps by our qualified technicians. � Is compliant with ISO 14000, ISO 18000, ACCP and Canadian food industry standards � Has been adopted by thousands of industrial customers worldwide!

Call us today at

1-888-592-5837 for a free demo at your plant and get your welcome gift! www.biocircle.com www.walter.com

The vibration monitoring system was installed in 2006.

system provider, 01dB-Metravib. On April 21, 2009, after an alarm was issued by the instrumentation on the generator, the operator of the wind farm requested the results of the analyses of the latest vibration measurements from the service provider. It also requested a diagnosis of the problem, along with recommendations for maintenance actions.

In parallel, the operator also consulted the subcontractor in charge of the maintenance of the machines, who recommended replacing the bearings of the generator. On April 22, the service provider and 01dB-Metravib sent the conclusions of their analyses to the operator, along with their diagnosis hypotheses. The study of the most recent vibration signals collected on the generator, as well as the analysis of their time history, showed a few problems with the equipment, including: • the existence of a very marked periodic shock at the rotation frequency of the generator (1,500 rpm) on the last measurements collected at high speed on the bearing located opposite the coupling • progressive occurrence of shocks throughout the month of March 2009, and development of these shocks during the month of April 2009 • a strong and concomitant increase of the Kurtosis parameter collected in March and April 2009 • the existence of a similar but less intense phenomenon when the turbine was operating at slow speed (1,000 rpm) • a notable increase of the vibration components corresponding to the notch frequencies of the generator, which are electromagnetic vibrations generated by the presence of notches on the rotor, these notches hosting the windings or bars that make up the rotor electric circuit. The conclusions and diagnosis hypotheses were as follows: • No fault – scaling, wear or defective lubrication – was identified on the bearings • Possible – but not likely – air gap change (rotor/stator distance) resulting from radial backlash • Possible temperature phenomenon, which may result from a ventilation problem on the generator, leading to stator distortion and rotor/stator contact • Hypothesis of a secondary element generating shocks at the rotation frequency. Accordingly, the following corrective actions were recommended: immediate visual inspection of the generator; verification of the fixing of the generator fan, which is mounted along the rotor axis on the opposite side of the coupling, and driven by an independent motor; and control of the bearing backlash. On April 23, 2009, based on these elements, the machine was inspected, while the electric parameters were controlled. The on-site operations by the technicians showed that the fixing devices of the generator fan were broken, hence the air flow was no longer correctly oriented, which generated abnormal heating of the machine at the origin of the observed phenomena. The fan was set back into place during the operation (which lasted three hours), after which the machine could be restarted. The bearing replacement scheduled for the next day was cancelled. In this example, the diagnostic capabilities offered by the system proved very useful, allowing for a targeted, quick and relevant maintenance action, thus avoiding a costly and useless operation (changing the bearings). No degradation of the machine was observed, while operating losses were limited to the maintenance time. Furthermore, the operator benefits from the experience of getting feedback on the machine. MRO Frédéric Champavier is a CMS expert with 01dB-Metravib. The company is represented in Canada by Alliance Predictive, Sherbrooke, QC. For more information, visit www.alliancepredictive.com and www. oneprod-system.com, or use the reply number below at mromagazine.com/rsc.

®BIO-CIRCLE and BIO-CIRCLE & Design are trademarks of Surface Technologies IP AG, used under licence

Reader Service Card No. 126

Reader Service Card No. 402


F O C U S

O N

T E S T

&

15

M E A S U R E M E N T

November 2010

Machinery & Equipment MRO

Advances in infrared tools make inspections easier Interface to asset databases aids in route creation and equipment diagnostics. safety regulations and maintain ISO quality standards in an increasingly competitive environment. Capital-equipment intensive facilities are finding it critical to make sure that the maintenance department is well-equipped with the tools required to keep equipment running efficiently in order to meet these challenges. That’s where PdM tools come into play, as they

can be used to perform thermal imaging, vibration monitoring, oil analysis, laser sighting-based rotating machinery shaft alignment, and ultrasonic testing. In order to assure that the PdM tools are optimally used and integrated with asset management information, new models have evolved whereby the tool assists users at a variety of skill levels in performing the necessary inspection

tasks with precision, consistency and efficiency. One such example is the thermal imaging camera that now includes not just an imaging capability to perform infrared inspection, but also incorporates an operating system that can be an interface to asset databases. The infrared inspection tool can now guide the user with route-based inspections and permit the capture of in-the-field incident details through image smart tags. Route-based infrared inspection Many PdM professionals are familiar with route-based vibration data collectors. Route-based data collection has proven itself to be a productive and effective approach to conducting repetitive inspections of industrial equipment, including rotating equipment, electrical systems and many other critical production assets. A route-based system for infrared inspection cameras is also ex-

sT

I

nfrared inspection is an established predictive maintenance (PdM) method that continues to evolve. Recent advances in infrared camera platforms have created a new class of infrared imaging instrument that helps make PdM easier than ever. Infrared cameras can now incorporate pen-based computing, which — with application specific software — can create a powerful infrared inspection data logger. This product integration has a direct impact on the return on investment (ROI) for thermography programs, as well as on productivity, training and the integration of thermal inspection data with CMMS systems. Today’s operations managers are under tremendous pressure to decrease costs, increase asset availability, reconcile employee skill levels, comply with

m e : u le .co eQ p ite r Am ct o To s sel A .u w w w

Infrared inspection cameras now integrate pen-based computers with asset databases, enabling users to create routes, identify the equipment being inspected and select fault options per equipment type.

continued on page 16

no lImITs Any Industry, Any Application

Photos courtesy Sofradir EC (Electrophysics Corp.)

Fig 1

To mAxImIze The relIAbIlITy of your desIgns, specIfy locTITe® 243™ / 263™ By filling the thread roots and preventing side-to-side movement, Loctite® Threadlockers dramatically increase the reliability of assemblies . With recent advancements in chemistry, Loctite® 243™ (blue, medium strength) and Loctite® 263™ (red, high strength) now provide:

Fig. 1: In this example of a route setup, the Location is ‘Computer Room 2A’,

– Enhanced temperature resistance up to 360°F (180°C) – The ability to cure through oil on “as received” fasteners without cleaning – Curing without primers on steel, stainless steel, and most plated fasteners

the Location Detail field is ‘Back-up Supply’ and the Equipment type ‘UPS’ (Uninterruptible Power Supply). Each location on the route can be customized like this.

® and ™ designate trademarks of Henkel Corporation or its Affiliates. ® = registered in the U.S. Patent & Trademark Office. © Henkel Corporation, 2010. All rights reserved. AD-107-10 Reader Service Card No. 127

Henkel Canada Corporation 2225 Meadowpine Blvd. Mississauga, Ontario, L5N 7P2 1-800-263-5043 www.useloctite.com


16

F O C U S

O N

T E S T

&

M E A S U R E M E N T November 2010

continued from page 15 tremely desirable, resulting in the acquisition of more reliable data, systematically gathered, stored, and consistently available throughout the enterprise. Typically, the camera can be operated in several modes, including off-route inspection, learn, on-route and survey (see Figs. 1 and 2). 1. Off-Route Inspection: This mode is useful when the user does not wish to follow a planned path, nor wants any assistance specifying the location of the points to be measured. (Cameras not equipped for routing always operate in the OffRoute mode). 2. Learn Mode: This mode allows the user to teach the camera an ordered list of inspection points (known as a route). For each of the traversed inspection points, the specific location, location detail, and equipment information are captured. Learned routes are saved in indi-

vidual files by user-defined names to facilitate future recall. Note that routes may also be created on a PC. 3. On-Route: A user selects a learned route from a set of routes stored in the infrared camera. While ‘on route’, the camera user is guided through an ordered set of inspection points. At each inspection point, the user has all the predefined inspection point information. The user can elect to take an image if desired (for example, if an anomaly is found, or simply to record the inspection event). 4. Survey Mode: This mode allows a user to randomly review inspection points on a specific route. This permits the user to benefit from the instant recall of predefined location and equipment field values, simplifying data entry and increasing operator efficiency.

Photo courtesy Sofradir EC (Electrophysics Corp.)

Machinery & Equipment MRO

Downtime is expensive. We can help you reduce that time with high quality tungsten carbide parts—parts that will last 5 to 25 times longer than tool steel in the same high wear applications. Working in tungsten carbide and other advanced materials, our skilled craftsmen will manufacture custom parts for your equipment to exacting specifications.

Contact TWD for your Wear Solution. Reduce your downtime

Reader Service Card No. 128

mode, the user selects a learned route from a set stored in the infrared camera. Then the camera user is guided through an ordered set of inspection points. In this example, the location on the route.

before it stops you.

877-303-2433 or www.StopWearOnline.com.

Fig. 2: Using an On-Route

backup generator is the next

Image smart tags The significance of adding the loca-

and maintenance costs and improve the bottom line.

Fig 2

THOMAS WIRE DIE LIMITED

tion, location detail and equipment field relationships into the routing process described above is that users can configure their camera in advance to guide them through a series of inspection points in which each of these fields can be preset, extensively simplifying user input in the field. Since the relationship between equipment, diagnosis and recommendation fields can also be userconfigured on a PC host, in-field typing is nearly eliminated in favour of the automatic population of input boxes and simple pull-down menus. Image smart tags provide an opportunity to supply new image attributes, change default entries, or select from pull-down lists. As shown in Fig. 1, the location could be “Computer Room 2A”, the location detail field is “Back-up Supply” and the equipment type “UPS” (Uninterruptible Power Supply). Once the equipment is identified, the infrared camera can offer expert-systembased diagnosis and recommendation options for that equipment. For example, diagnosis options for a UPS system may include: Faulty Connection, Defective Equipment, Improper Crimp, Overload, Unknown Anomaly, Short Circuit, or Other, to name a few. Once identified, the severity field can be identified in the camera and comments added. Since all information is stored with the image, downloading after an inspection run will make the information accessible in PC software for archiving and automatic report generation. As with other predictive maintenance modalities, infrared inspection has matured to be a common tool for the maintenance professional. In order to reap the benefits of infrared inspection, recent advances in infrared camera platforms have created a new class of infrared imaging instrument that incorporates many of the benefits of pen-based computing. With application-specific software, it can create a powerful infrared inspection data logger with many traits similar to mature vibration data collection systems. Such developments have made possible route-based inspections and the use of smart tags to facilitate infrared inspections, better organize infrared inspection programs, optimize manpower planning, increase consistency of data a nd improve the productivity of MRO personnel. This article was prepared by Sofradir, a Paris-based developer and manufacturer of advanced infrared (IR) detectors. In Dec. 2008, it acquired Electrophysics, a Fairfield, NJ-based developer of advanced high-performance IR equipment, now known as Sofradir EC. For more information, use the reply number below at mromagazine.com/rsc. Reader Service Card No. 400


F O C U S

O N

M O T O R S

&

November 2010

Machinery & Equipment MRO

How proper shaft sizes are determined

Consider modifying a shaft only with good engineering support. Even then, remember that the greater the consequence of failure, the more generous the safety factor should be. BY CHUCK YUNG AND CYNDI NYBERG

H

ave you ever wondered why various types of electric motors with the same hp/kW ratings have different shaft diameters, or why some pump shafts are so much smaller than the shafts of the motors that drive them? And what about those hollow-shaft motors? Knowing the answers to some of these questions, and some of the basics of how shaft sizes are determined, can be helpful to anyone who works with pumps and motors.

Fig 1

Bigger is better, at least it used to be Owing partly to tradition, the shafts of electric motors are often larger than those Fig 2

Fig 1. A fire pump such as this does not run often, but it had better work when you need it. Fig 2. Effluent pumps application. Fig 3. This shaft failure started at a shoulder on the surface.

of the equipment they drive. Engineers were very conservative a century ago when electric motors first came into widespread industrial use, so they typically designed in a sizable margin of error. Today’s engineers haven’t changed much in this respect. For example, standard NEMA frame dimensions, which have been revised only once since 1950, still specify much larger shaft sizes than commonly accepted principles of mechanical engineering would require. Shaft design basics Shaft size is dictated by torque, not horsepower. But changes in horsepower and speed (rpm) affect torque, as the following equation shows: Torque (lb-ft) = hp x 5252/rpm. Accordingly, an increase in horsepower would require more torque, as would a decrease in rpm. For example, a 100-hp (75-kW) motor designed for 900 rpm would require twice as much torque as a 100-hp motor designed for 1,800 rpm. Each shaft must be sized for the torsional load it is expected to carry. Two basic approaches are used to determine the required minimum shaft size for motors, both of which are quite conservative. One method calls for making the shaft large enough (and therefore strong enough) to drive the specified load without breaking. Mechanical engineers define this as the ability to transmit the required torque without exceeding the maximum allowable torsional shearing stress of the shaft material. In practice, this usually means that the minimum shaft diameter can withstand at least two times the rated torque of the motor. Another way to design a shaft is to calculate the minimum diameter needed to prevent torsional deflection (twisting)

17

D R I V E S

during service. To engineers, this means the allowable twisting moment, or torque, is a function of the allowable torsional shearing stress (in psi or kPa) and the polar section modulus (a function of the cross-sectional area of the shaft). Machinery’s Handbook provides the following equations for determining minimum shaft sizes using both design approaches: resistance of torsional deflection and transmission of torque. Both sets of equations are based on standard values for steel, with allowable stresses of 4,000 psi (2.86 kg/sq mm) for power-transmitting shafts, and 6,000 psi (4.29 kg/sq mm) for line-shafts with sheaves (the proper name for what most of us incorrectly call pulleys). Some of the equations also are specific to keyed or non-keyed shafts, which is handy for pump users who need to know how to calculate the size of each kind. (see Formula 1) Most motor shafts are keyed, which increases the shear stress exerted on the shaft. Considering this, motor shaft designs typically use no more than 75% of the maximum recommended stress for a non-keyed shaft. This is another reason why the shafts of electric motors are often larger than the pump shafts they drive. Example 1: Consider a 200-hp (150kW), 1,800 rpm motor. For a direct-couple application, the standard frame size is 445TS, with a (keyed) shaft diameter of 2.375 in. (60 mm). Using equation [1] (from Formula 1), the minimum shaft size would be as shown in Formula 2. To see how much of a safety factor is built into the Formula 2 equations, substitute 400 hp for the 200 hp power rating. (see Formula 3) Since the calculated shaft diameter

vertical motors. These designs allow the pump shaft to pass through the hollow motor shaft, which simplifies the coupling process for pump shafts that must support the heavy water column associated with a deep well. Resistance to twisting method The calculations for shaft diameter are The other way to calculate minimum not quite as straightforward for a vertical shaft size for a motor is to set a limit on hollow-shaft motor. Two variables — the the amount of torsional deflection (twistoutside and inside diameters of the holing) that may occur. Resistance to torlow-shaft — are not standardized, maksional stress is directly proporFig 3 ing it impossible to simplify the calculational to shaft size: the larger tion with a ratio. For this reason, it is the diameter, the greater the reeasier to demonstrate if a specific hollowsistance to twisting. shaft is sufficient for a given power rating. A rule of thumb with this Example 3: A 200-hp, 1,800 rpm hollowmethod is that the shaft must be shaft motor has an outside shaft diameter large enough that it will not deof 3 in. (76 mm) and inside diameter of 2 in. flect more than 1 degree in a (51 mm). To determine if this shaft size is length of 20 times its diameter. sufficient to transmit the required torque, To calculate the minimum shaft size to solve the following equation for P: meet this specification, see Formula 4. 80 × P/N = (D4 - d4)⁄ D [5] Example 2: For the 200-hp, 1,800-rpm Where: P = power in horsepower motor from Example 1, the minimum N = rpm shaft size to limit torsional deflection D = outside diameter of hollow shaft (inches) would be as shown in Formula 5. d = inside diameter of hollow shaft (inches). The minimum shaft diameters calcuFor this example, P must be greater than lated by the torque transmission and tor200 hp to ensure that the shaft will be large sional deflection methods are essentially enough to handle the torque of the motor: the same for Examples 1 and 2. Still, a 80 × P/1800 = (34 − 24)⁄3 good approach is to calculate the size P = 1,702 hp. both ways, and then use the larger value Theoretically, this shaft is capable of as the absolute minimum. transmitting 1,700 hp, so it is more than sufficient for the 200-hp requirement. Hollow-shaft designs Example 4: The amount of torque that a Direct-coupled loads exert a twisting hollow shaft can transmit depends on force (torsion) on the shaft, placing the thickness of the wall between its inside greatest strain near the surface or radius and outside diameters. A thinner wall canand very little on the inside portion. That not handle as much torque as a thicker one. makes hollow-shaft designs practical for The 3-in. shaft in Example 3 was capable of transmitting 1,700 hp and FORMULA 1 had a wall that was 0.5 in. thick: (3 − 2)/2 = 0.5 in. How much horsepowThe transmission of torque approach er could a 3-in. shaft transmit if the Shaft with keyway Shaft without keyway wall were only 0.25 in. thick? Main power-transmitting shafts [1] 80 × P/N = (D4 − d4)/D 80 × P/1800 = (34 − 2.54)/3 60 P 105 P D= 3 (inches) (inches) D= P = 314 hp N N The effect of a thinner wall is dra6 1.33 10 P D=3 (mm) matic. The shaft with the 0.25-in. N wall can carry less than 20% of the Line-shafts with sheaves/pulleys [2] torque of the shaft with 0.5-in. wall. for a 200-hp motor is designed to withstand twice the rated torque, the shaft diameter of 2.371 in. is at the absolute minimum for the 400-hp rating.

D=3

40 P (inches) N

D=

70 P (inches) N

Where: P = horsepower N = rpm

FORMULA 2 D=3

60 P 60 200 = 1.89 in. = D=3 1800 N

Or, in metric units: D=3

1.33 10 6 N

P

= D=3

1.33 10 6 150 = 48 mm 1800

FORMULA 3 D=3

60 400 60 P = D=3 = 2.371 in. (60 mm) 1800 N

FORMULA 4 D= 3

P N

4 (inches)

[3]

Where: P = horsepower N = rpm Or, in metric units:

D= 3

P 112 (mm) N

Where: P = kW

[4]

N = rpm

FORMULA 5 D= 3

P N

4

= D= 3

200 4 1800

= 1.92 in.

Or, in metric units:

D= 3

P 150 112 = D = 3 112 = 49 mm N 1800

Summing up Engineers tend to design using an ample safety factor, and older equipment in particular was overdesigned by even today’s standards. Of course, that is one reason many of us appreciate older machinery. It was darned reliable! In any case, keep in mind that adding a keyway to an existing shaft weakens the shaft. Likewise, increasing the bore diameter of a hollow-shaft reduces the torque capacity. Consider modifying a shaft only with good engineering support. Even then, remember that the greater the consequence of failure, the more generous the safety factor should be. After all, who wants to board an elevator that was designed and built with no safety factor? MRO Chuck Yung is a technical support specialist at the Electrical Apparatus Service Association (EASA), and Cyndi Nyberg is a former EASA technical support specialist. EASA is an international trade association of more than 2,100 firms in 50 countries that sell and service electrical, electronic and mechanical apparatus. For more information, contact EASA at 314-993-2220 or visit www.easa.com. Reader Service Card No. 406


Resource Industry Suppliers Association (RISA) Energy / Power / Bio-Industry / Mining / Forestry Dedicated to deriving and delivering tangible business opportunities; OUR PRIORITY IS YOUR PROSPERITY! MARKET INTELLIGENCE • Capital Project Notices • Facility Shutdown Dates • Bid & Tender Information • Key Facility Buyer Contacts • Emerging Opportunities • Mergers & Acquisitions • Resource Sector Contractors • Supplies & Services • Facility Restarts & Closures PRODUCTS & ACTIVITIES • Export Market Support • Web Posting • Company Lists • Key Contact Lists • Canadian Forestry & Mining Business Directory • Resource Industry Golf Classic • Luncheons & Seminars • Buyer & Seller Forums • Workforce Support • Trade Events & Workshops

Start Generating Business Opportunities Now! Resource Industry Suppliers Association

Tel: (780) 489-5900 Fax: (780) 489-6262 E-mail: risa@resourcesuppliers.com Web: www.resourcesuppliers.com Reader Service Card No. 129


M A I N T E N A N C E

19

M A N A G E M E N T

November 2010

Machinery & Equipment MRO

SIGNALS OF

SUCCESS

©Comstock/Thinkstock

Follow along with Step 35 in a journey to World-Class Maintenance at the Plentya Paper Company as the maintenance team strives to achieve its goals. BY CLIFF WILLIAMS

seem to have reduced our inventory by much. I don’t quite understand that, but I think we’ll be able to find out, since the CMMS produces some good reports.” “I think I’ve got an answer for the slow inventory drop, Carol. Pretty much everything we’ve done has resulted in not using parts, so apart from the motors that Kevin shipped out, we haven’t actually reduced anything. As time goes on, we should see a drop in costs as we use up the surplus and see the corresponding inventory value drop. What sort of reports can we get?” “Well, we can get usage reports for all parts, and average lead times for parts — along with max, min and reorder quantities. There’s also the ‘Automatic Purchase Generator’ that triggers a report of suggested purchases — although in reality it’s not a suggestion list; it’s a list of required purchases, because noone really reviews it.”

This article is part of an ongoing series. The introduction appeared in Machinery & Equipment MRO’s February 2005 issue and the series has run in every issue since. Previous instalments are archived online at www.mromagazine.com. In this issue, we pick up where we left off in the September 2010 edition, as maintenance manager Bob Edwards gets ready to take on more responsibility in implementing major changes to the mill’s maintenance operations.

Taking Action Moving Forward

A

fter hearing that one of our key millwrights, Dave, had accepted a job offer at another company as its maintenance manager, I called the guys together in the shop the next day, and told them about what was happening. There was definitely a subdued reaction from the group. It was Stan who broke the silence. “Well, that just means we’ll have to take more of a role, and when we get the new guy, we’ll need to make sure he follows in Dave’s footsteps. What was it you guys used to say to me? ‘Lead, follow or get out of the way’?” After that, everyone seemed more positive as they trooped out of the shop. Surprisingly, the day carried on as normal, even without Dave being there. Later, I finished my calculations and figured that by reducing the number and time of our shutdowns, we could realize a gain of at least 2% from the planned downtime — and if we didn’t have the downtime associated with start-ups, we could reduce maintenance downtime by 1%. Joe couldn’t argue with these numbers and I was sure corporate wouldn’t complain. That thought reminded me that I would have to present to the corporate group next week, so I thought I’d touch base with our reliability manager, Carol. When I called her, she said that she wasn’t quite ready and asked if she could have more time to get all of the reports together. It wasn’t like Carol not to be ahead of schedule, but I told that would be fine. “Tomorrow’s good — it’ll give me the weekend to look at it,” I said. The next day, I went to Carol’s office to get the reports. “Well, the good news is that we are improving very quickly. Our downtime is down to 4%, which is less than half of what it was before. Our cost per ton has also dropped by 10% due to the fact that we use fewer parts and produce more tons. But the bad news is that we don’t

“Hmm, that’s interesting. Do you think you could get me a report that includes the APG list, along with the max, min and reorder quantities, lead time and usage all in one?” “I’m pretty sure I can, but who’s going to take the time to look at a report that size?” “I will. I’ve got to believe that we are in a bit of a mess in the stores, given what I’ve been hearing recently.” The day of the meeting with the corporate group arrived and I felt quite comfortable heading in with the reports that I had. Joe, however, seemed a little bit nervous when he handed over the meeting, as he commented, “Bob will take you over what he’s done so far and explain how it falls in line with what they’re doing at the paper mill the team visited in Wisconsin.” I explained to the group, which incontinued on page 20

Network of Support British Columbia Castlegar BC Cranbrook BC Kamloops BC Kelowna BC Parksville BC Prince George BC Quesnel BC Vancouver BC Williams Lake BC

(250) 365-7767 (250) 426-4255 (250) 374-8116 (250) 491-3434 (250) 248-7188 (250) 562-1114 (250) 992-7038 (604) 523-2662 (250) 392-2388

Alberta Calgary Edmonton Grande Prairie Lethbridge Lloydminster Medicine Hat Peace River

AB AB AB AB AB AB AB

(403) 243-5581 (780) 437-9411 (780) 539-3888 (403) 328-6681 (780) 875-8864 (403) 527-8166 (780) 624-4771

Saskatchewan Esterhazy SK Estevan SK Regina SK Saskatoon SK Swift Current SK

(306) 745-6631 (306) 634-7321 (306) 757-5667 (306) 934-3366 (306) 773-2066

Manitoba Winnipeg MB (204) 786-1167 Winnipeg - Ag MB (204) 786-1976 Ontario Brampton Brantford Chatham Downsview Etobicoke London Newmarket Stratford

ON ON ON ON ON ON ON ON

(905) 456-2226 (519) 770-0239 (519) 354-8444 (416) 743-5713 (416) 252-2555 (519) 686-2650 (905) 853-6540 (519) 271-3130

QC QC QC QC

(418) 296-5575 (418) 775-3232 (418) 968-5577 (819) 840-0489

Quebec Baie-Comeau Mont-Joli Sept-Îles Trois-Rivières Nova Scotia Dartmouth

NS (902) 468-4300

With a goal of becoming a truly national organization in Canada, Applied Industrial Technologies continues to take action in expanding our business. With our recent acquisition of Toronto Bearings & Belting and CBS Equipment, Applied is proud to now operate eight facilities in Ontario. At Applied Industrial Technologies, we're always right there when you need us, providing local, value-based solutions.

Reader Service Card No. 130

www.appliedcanada.com


20

M A I N T E N A N C E

M A N A G E M E N T

Machinery & Equipment MRO

November 2010

continued from page 19

line results, while and when I talk with getting the guys enmy counterpart in Wisgaged. But it will consin, I’m amazed at take some changes, a exactly what the frontIf someone opens the move towards emline people do. Do you door, walk on through powerment and a have a measure for great deal of trust.” that and how are we Delegate as soon Joe just closed his doing in that aspect?” as possible eyes and shook his “Well, Scott, if there Involve as much head as I continued is a measure, I’m afraid as possible by telling the group I don’t know of it — and that we had just when I talked with started tracking the Alan at the Wisconsin reasons for delays in getting work done mill, he didn’t really know of one either.” and that we believed a large proportion I went on to tell the group about our of it was waiting for someone with audiscussion with the Wisconsin managethority to make a decision on it — a deciment team, where they told us that this sion the trades staff were quite capable of was their operating mode and it was making themselves. driven by the bottom line. “Their philoso“Once we’ve confirmed that is true, phy is that decisions should be made at we’ll start delegating authority in a conthe lowest level possible and they’ve done trolled way. We can set up some sort of everything to allow that to happen. criteria that will allow the work to be That’s something we’re working on right completed sooner. This will also involve now and we believe it will give us bottomthe operations group, as they will be involved in the decision-making process, so that will help us to include more people in the changes we’re trying to make.” “Thanks, Bob,” said Scott. “That was encouraging stuff. Joe, I think we can safely say that this mill is headed in the Introducing… right direction, and as I’ve mentioned before, we’ll be looking to you and people like Bob to help guide the other mills.” “You can count on that, Scott, and thanks for the support,” Joe replied. The next morning, Joe called me to his office, where he appeared a little bit anxious. “Bob, please don’t pull a stunt like that again — you know I didn’t know anything about the move to give the guys more authority.” “I couldn’t help it. Scott just opened up the door and I had to drive through it. I think we came across very well, given their comments.” “Yes, but as you mentioned, this will involve operations as well, and I’m not sure Fred’s group is ready for this.” “I think you are selling Fred short,” I said. Then I told Joe about the change I had seen in Fred and about his comments to Kevin about work orders. “I know his guys are ready for it and I’m sure that all Fred needs is a little bit of support and a lot of reassurance. I’ll get Patent Pending him involved very soon.” “Okay, but in future, keep me up-tospeed with everything you’re going to mention in a meeting!” Later that day, I got the supervisors and Carol together and told them about what had happened in the meeting with the corporate group. “Let’s call a meeting with the guys,” TM suggested Carol. “I want you to tell High-Efficiency Right Angle them about the codes and ask for suggestions on how we can reduce the deAchieve up to 40% energy savings! lays, but we’ll need to be ready for a lot of them! I’ll talk with Fred so he’ll be With the new Hub City HERA gearbox, it’s easy to replace inefficient gearing aware of what’s going on.” technology with a product that delivers 90% operating efficiency in ratios up to “Why not ask Fred if he wants his 60/1. Each HERA model also has the power density and versatility to directly guys to sit in on the meeting?” suggested Kevin. “That way, we can be sure replace up to four different worm gear models, minimizing inventory and that everyone gets the same message. downtime. Simply unbolt the old and drop in your new high-efficiency HERA. Carol and Jim, our maintenance supervisor, can take a group each and if you HERA – One powerful GREEN solution! take one, then we’ll be able to cover all four shifts.” “That’s a great idea, Kevin. I can invite Fred to sit in with me and that should MRO help with his understanding.”

cluded the vice-presidents of operations and finance, what we had done so far. They seemed impressed that we had been able to reduce our unplanned downtime by 50% and seemed really keen when I discussed how we had managed to reduce inventory a little, with a plan to reduce it by a substantial amount over the next year. “Exactly how much and how are you going to do that?” asked Monte, the vicepresident of finance. “How much? That I can’t really tell you yet as we don’t have good data on which to base the numbers, but rest assured that it will be as much as possible without putting the operation of the mill at risk.” As to how, I described the usage reorder report that I had asked Carol to prepare. This seemed to answer their questions satisfactorily. I saw Joe squirm just a little as I next brought up the subject of planned down-

time. When I brought up my chart that showed that we could easily save 2% downtime on planned shutdowns with a probable bonus of 1% of what was now being classified as unplanned downtime, everyone perked up. And when I mentioned how this was very much in line with what the Wisconsin mill had experienced, I’m sure everyone in the room could hear Joe exhale. Scott, the vice-president of operations, had said very little all through the meeting and I wondered if he really saw value in what we were doing. But he soon allayed my fear when he commented, “Well, Bob, it looks quite impressive with what you’ve shown so far. We’ll soon be at the world-class mark for unplanned downtime, your inventory turns will be close behind and your planned downtime will far outdo any other mill I’ve heard about — other than Wisconsin. “Now Joe has mentioned a little about how you try and get the guys involved —

Key Points

HERA

Phone: 605-225-0360 • Fax 605-225-0567 Email: hubsales@regalbeloit.com • www.hubcityinc.com

Reader Service Card No. 131

Cliff Williams is the corporate maintenance manager at Erco Worldwide in Toronto, ON, and a consultant with TMS — Total Maintenance Solutions Inc., Markham, ON. He can be reached by email at williamscliff@rogers.com.


C M M S

T

21 Machinery & Equipment MRO

It all started with a

his month, I’d like to focus on a BY tool that has been in use since the 1950s. In its early PETER days, it was compared to PHILLIPS the common screwdriver. In fact, the screwdriver helped to develop the parameters we use with this tool to determine the condition of rotating equipment in our facilities. The tool is vibration analysis (VA) and today a predictive maintenance program The early history of the introduction of vibration analysis couldn’t function without it. VA technology to maintenance is a fascinating story, told here in in the early days wasn’t available to use right off the shelf and recognition of MRO Magazine’s 25th anniversary and also usually had to be invented and produced on the spot, where it was to mark the Royal Canadian Navy’s 100th anniversary. needed. Then in 1954, recognizing the demand for this type of equipment, Jim Chadwick and Jim Helmuth started a company that successfully produced vibration measurement systems. Some of their first systems were applied to the manufacturing of Hughes helicopter engines. Over the years, these field-ready units were used by every maintenance facility that serviced aircraft engines. In Canada, the application of VA began in 1974 when the CanaThis is the original engine test cell at the navy’s facility in Shearwater, NS. dian Armed Forces started using it on its Sea King helicopters. To get the story of these early chased vibration analysis units, and days of VA in the Canadian Navy, I with thick concrete walls in Shearwamany of those who haven’t done so yet spoke with Jolson Sanford of Windter and Greenwood, NS. By 1984, most continue to purchase services from vibrasor, NS. A retired Navy Master Canadian Forces bases had engine test tion analysis specialists. Chief, Sanford helped to develop cells and vibration analysis equipment. Although VA is more commonly reVA equipment and the early stanWhen we went to sea, we’d pick up a VA ferred to now as condition monitoring, dards for measuring vibration in kit to take with us. We’d need it to do ©Hemera/Thinkstock the latest equipment allows vibration turbine aircraft engines. repairs and services to the helicopters readings to be recorded over time using I asked him what it was like on the ship. benchmark readings. trend analysis software. Gone are the in the beginning, when vibration analy“As we refined our use of VA on our “Over a period of time we would chart paper records and recipe cards. Today, sis was a brand new tool. Sea King helicopters and Aurora airevery engine. Back then, a helicopter tureverything’s right at your fingertips. “We used a vibration kit called Vicraft, our efforts began to be noticed by bine engine had to be torn down and reBack in Sanford’s day, VA was only brex, made by Chadwick Helmuth, our military colleagues. In 1985, the built every 200 hours of run or flight time. capable of measuring high rpm readwhich was the only one available at the American Air Force contacted us to go to We’d put the engine in the test cell and ings. Today, full spectrum measuretime. Before VA was introduced into the Memphis to help them build a test cart take VA measurements on every bearing. ments can be taken on critically lownavy, we used a screwdriver held for their Sea Stallion helicopter. By then Then we’d tear it down and examine the speed rotating equipment to ultra-highagainst the bearing housings of the Sea we had developed the benchmark readbearings, comparing their condition to frequency centrifugal compressors that King engine. With the screwdriver grip ings and it was easy to determine the their corresponding VA readings. rotate up to 80,000 Hz. against our ear, we determined if bearcondition of the engine bearings. They “We would replace all the bearings Variable-speed equipment measureings were good or bad. were quite impressed with our methods. during the rebuild and put the unit back ments, which once were difficult if not “This was the only way at the time to “As time went on, engine reliability into the test cell again for multiple starts impossible to record and analyze, now troubleshoot faulty bearings. As you got improved and the 200-hour teardown can be taken as modern analyzers autoand run-ups, while taking more VA meaexperienced listening to the sounds you and rebuild intervals were lengthened. matically adapt their diagnostic tools to surements. These measurements and refelt and heard, you could determine This had a lot to do with the historical variable turning speeds during routine pairs were recorded for each engine on which bearings were close to failing. data we had collected on our recipe data collection. recipe cards. Along with the VA graph, “When VA was first introduced, there cards, and our ability to predict failures Even more advanced instruments the card would be posted on the walls of were no baseline or benchmark readings and test engines.” use dual channels to correlate machinthe test cell office. One of the test offices to determine the condition of the Sea Sanford said that many of their bearery vibration with process variables. we had was 12 x 14 ft. We had hundreds King engine bearings. In the beginning, ing problems occurred due to lubrication of these cards covering every wall in the This is accomplished by inputting the we used our screwdrivers in conjunction issues. Faulty lubrication pumps and room. This was the history of every reprocess information as a volt signal into with VA pickups (sensors) attached to the plugged lines caused premature failures. pair that was done to each engine.” one channel, while monitoring vibration bearing housings. Back then, we even Whether it’s in the 1970s or now, the reaSanford added that these early years on the other. had to make the stand-offs (brackets) in sons for such failures are the same. Lack were interesting. “The first VA test carts Of course, vibration readings can be the machine shop to mount the vibration of lubrication is still a major cause of we built were mobile. The engine would recorded in a CMMS system and you can pickups to the bearing housings. bearing failure. be bolted on to the cart and wheeled belet it do the data crunching. It can then “Once we had them mounted, we Interestingly, the methods of meahind an earth berm and tied down with inform you that readings are out of spec would compare the reading on the surement really have not changed much one-inch cables. We stood behind an and maintenance on the equipment graph that the VA gear would print out, these days either, as experienced mainteearth berm in case the engine blew up. needs to be scheduled. with what we heard with our screwnance practitioners still use screwdrivers “The Sea King T58 GE engine absoThis year, 2010, marks the 100th andriver. If we found a bad bearing with to listen to bearings. The big difference lutely screamed when it was turned up. niversary of the Royal Canadian Navy. I our screwdriver, we would see if the today is the availability of the new techThe compressor rotated at 26,000 rpm am pleased to dedicate this article to all graph corresponded. The graph would nology that has been incorporated in and created 4,200 hp. We really took our those retired and active service people have high peaks if the bearing was failmodern vibration analysis equipment. lives into our own hands testing those who have developed many tools and ing. Bearings with the highest readNew VA equipment comes in handengines in the open air without any promeasurements that we now use in evings would score a ‘4’ on the graph. held units that can be quickly used to MRO tection. Once, in a lead-lined indoor test eryday industrial life. Other questionable bearings would measure a bearing’s condition; it simply cell, an engine blew up and the turbine score lower, usually a ‘1’ or ‘2’. displays a good or bad reading. More soPeter Phillips of Trailwalk Holdings, a blades were stuck in the walls around “Then we would dismantle the engine phisticated units measure and analyze CMMS consulting and training comthe room. Imagine what would have hapand check and measure the bearing. We the collected data, and though analytic pany based in Nova Scotia, can be pened if we had tested it outdoors just paid special attention to the ones we software provide users with useful reached at 902-798-3601 or by e-mail with a test cart. found bad with our screwdriver and VA. graphs and reports of the results. at peter@trailwalk.ca. “In the 1980s, we built test cells This is the way we developed the first Today, many companies have pur-

SCREWDRIVER

Photo courtesy Jolson Sanford

Machinery November 2010 & Equipment MRO

S O L U T I O N S


22

S U P E R V I S O R Y

S U G G E S T I O N S

Machinery & Equipment MRO

W

ant to improve your performance as a manager right now? Pick a few of these time-tested success tips and implement them in your work life.

1. Admit your mistakes.

These tips for success apply whether you work in an office or on the shop floor. BY RICHARD G. ENSMAN, JR.

3. Ask questions. 4. Ask the people around you to list

their top three skills. Then discuss with them how they can use the skills to more effectively reach your collective goals.

5. Be a good example. 6. Build a continuing education plan for yourself.

7. Carve 15 minutes out of your schedule each day for ‘think-and-plan’ time.

8. Delegate something you haven’t delegated before.

9. Determine what you procrastinate

25. Make it a point to embrace a new idea or learn a new skill at least once a month.

26. Make up a schedule that keeps you at optimum productivity, and stick to it.

27. Never be afraid to stand up for what’s right.

28. Offer to mentor a new employee. 29. Pick one bad habit you’ve noticed among the people around you, and set a good example of the behaviour you need from them.

30. Pick one speaking or presentation

skill you’d like to polish, and find a way to practice that new skill.

31. Pick one troublesome computer skill you’d like to learn, and set aside two hours to master it.

32. Pick the very best quality of each

your employees. Then match that skill with some important task or unmet need.

10. Each day, make it a point to show in-

33. Promote lifelong learning among

11. Encourage the people around you. 12. Face your fears. Admit to yourself

what frightens you in your work life. Whether you resolve the fear or not, bringing it in the open will be liberating.

13. Figure out what distracts you from doing important (although sometimes boring) work. Ask yourself: How can you eliminate those distractions?

14. Identify the three activities that will

make the most positive difference to your organization over the next year. At the start of each day, check on progress and pay attention to what you can do to move further along on your key activities.

15. Identify the triggers that make you

angry or upset. Ask yourself what you can do to minimize the emotional impact of those triggers, or at least give yourself time to address problems when they occur.

your employees and colleagues.

34. Put a smile on your face. 35. Read blogs and websites about your interests.

36. Remain calm in the face of conflict. 37. Say ‘please’ and ‘thank you’. 38. Scan a book list for recently-pub-

lished books on leadership and management. Pick one to read.

39. Set a new ‘stretch’ goal. 40. Spend some social time with your employees, colleagues or vendors.

41. Take a few minutes each day to plan goals and activities for the next day.

42. Take steps to reach optimum health. That might mean difficult changes in diet, exercise or personal routine.

43. Tell your team that you believe in them.

44. Think about the worst possible sce-

close to you that you haven’t talked with recently. Have coffee with them.

nario you could face as a manager — and figure out how you would address the problems that scenario would pose.

17. Improve your time management sys-

45. Treat each person you meet — em-

16. Identify three people professionally

tem by writing down goals and tasks.

18. Make an inventory of your top three

professional weaknesses. Ask your associates to help you overcome them.

19. Learn to say no when you need to. 20. Let a promising subordinate know

that you have confidence in him or her.

21. Let your employees know what’s going on behind the scenes.

22. List the ways you get information right

now, such as employee reports or sales data. Identify three ways you can improve the quality, accuracy or speed of the information.

23. Make a list of people who can help you navigate difficult situations. And call on them when the need arises.

24. Make a list of the disagreements and Reader Service Card No. 132

satisfactorily. If not, read up on negotiation skills.

about. And then develop an anti-procrastination action plan.

terest and concern about the work of the people around you.

©Comstock/Thinkstock

50 ways you can become a better manager

2. Always tell the truth.

November 2010

disputes you’ve had recently. And evaluate whether you resolved them

ployees, customers, vendors, associates, visitors — with the highest standards of courtesy and respect.

46. Walk around your workplace and observe. You’re bound to learn something new.

47. Watch your language — verbal language and body language.

48. When you catch someone doing something right, acknowledge and praise it.

49. Write a new procedure for a common-

ly-performed task. Standard operating procedures may save you time and effort in the future.

50. Write a vision statement for your

business or work unit. Share it with your people at your next team meeting. MRO

Richard G. Ensman, Jr., is a regular contributor to Machinery & Equipment MRO.


P R O D U C T

23

N E W S

November 2010

What’s new…

in products, systems, components and accessories for machinery and equipment maintenance, repair and operations.

t

Transporter offers battery-powered lifting

Asco has introduced the 8262/8263 series two-way and 8314 series three-way directacting solenoid valves with increased AC and DC pressure ratings and real-time online configuration and ordering. The two-way valves come in brass and stainless steel construction with 1/8-in., 1/4-in. and 3/8 in. pipe sizes and are used to control the

Reader Service Card No. 351

Precision cylindrical roller bearing withstands abuse

Manufactured to maximize speed, precision and efficiency in high-demand machine tool applications, Timken’s precision cylindrical roller bearings for screw drives feature a combination of axial cylindrical rollers and radial needle rollers. This configuration helps manage loads from multiple directions during high-speed operation. The precision cylindrical roller bearings for rotary tables feature an integrated design, with an L-shaped inner ring, shaft washer, outer ring, two thrust roller cage assemblies and a radial fullcomplement row. These robust bearings are suitable for applications where rotational accuracy, consistency and rigidity are critical, such as rotary tables and grinding and milling operations. Timken

flow of air, water, light oil and specialty media such as cryogenic fluids, ammonia, oxygen and liquid propane. The three-way valves come in brass and stainless steel with 1/8-in. and 1/4-in. pipe sizes and are used to control the flow of air, water and light oil. Asco Reader Service Card No. 357

Welding helmet features camouflage graphics

Miller Electric has added the Digital Camo helmet to its line of Digital Elite series welding helmets. This helmet features a military-inspired camouflage design and comes in four fabrication modes. Other features include 1/20,000-sec. lens speed, weld, cut, grind and X-mode for versatility in the field, 3,000-hour battery life, manual-on and auto-off, and 9.22-sq in. viewing field that houses four independent arc sensors. The helmet offers variable shades (#8-13) in weld mode and light state #3 in grind mode. A magnifying lens holder is included. Miller Electric Reader Service Card No. 353

safe, biodegradable, non-flammable, nonabrasive, non-corrosive and non-toxic. It has a multitude of applications, including cleaning dirt and grease off equipment, as well as ink from presses. CompreVac Reader Service Card No. 352

Radio control system is for rope hoists

t

Southworth Products has introduced the Dandy Lift lifter/ transporter with a battery-powered lift mechanism. Lifting and lowering is achieved at the touch of a button with the aid of a 24-V battery. Available in five models with capacities from 220 lb to 500 lb, table sizes of 20 in. by 31.5 in. by 36 in. and raised heights to 51 in., the device features a battery status indicator and onboard charger, full shielding of electrical components, smooth-rolling casters, parking locks and a comfortable handle. A high-speed linear actuator provides precise positioning. The lift is suitable for use in stock rooms, shipping rooms, assembly areas, test stations, etc. Southworth Products

Two- and three-way valves offer improved performance

Machinery & Equipment MRO

DRC-MP radio control systems from Demag, designed for use with the company’s DR Pro rope hoists, provide a range of powerful features for enhanced operator control and added flexibility. Available in two ergonomic designs, the DRC-10 pushbutton transmitter and the DRC-J joystick transmitter, the systems come standard with bi-directional communication, an impact- and temperature-resistant housing, two buttons for special functions and a range of approximately 100 m (328 ft). The graphic display shows battery capacity, installation status and warning messages.

Demag Cranes & Components Reader Service Card No. 356

Piston-type open-circuit pump is compact

The 620 series of compact piston-type open-circuit pumps for moderateflow, high-pressure applications is available from Eaton. Optimized for Tier-4 diesel-powered applications, the pumps are rated at 280 bar and 2,200 rpm with a displacement of 98 cc (6.0 cu in.) revolution. They feature a 15-degree swash plate angle that allows the pump body to be up to 27 mm (1.1 in.) shorter than other pumps, and internal flows and valve plate timing realize the packaging benefits of the smaller angle without sacrificing overall pump efficiency. They have a variety of mobile and stationary uses, such as wheel loaders, motor graders, concrete equipment, rail maintenance, forestry equipment and drill rigs. Eaton Reader Service Card No. 358

When it really matters,

continued on page 24

trust Tsubaki.

Shaft collar offers tight fit

A wide range of shaft collars with controlled face tolerance and high holding power is available from Ruland. Offered in aluminum, black oxide carbon steel, stainless steel and engineered plastic, the shaft collars are single-point faced during

Reader Service Card No. 350

Retaining ring/wave spring combination saves money

Our latest Hook-up

Rotor Clip’s multi-turn wave springs offer a cost-saving method to pre-load and retain bearings in a variety of applications. The radial wall of the wave spring offers a wide supporting surface and the bearing load in the waves provides 100% axial transmission of the load. In place of a cover plate, the entire assembly can be the boring process to ensure a high level of face-to-bore perpendicularity. One-and two-piece clamp shaft collars are available with bore sizes from 3 mm to 80 mm and from 1/8 in. to 6 in. The company uses forged socket hardware, which allows for higher screw torque and increased holding power. All products are RoHS and REACH compliant. Ruland Manufacturing Reader Service Card No. 354

held in place using a two-turn spiral retaining ring, which offers a 360-degree closed surface of contact for the wave spring. The combination of retaining ring and wave spring offers an economical way of accomplishing the bearing preload and retention task. Rotor Clip Reader Service Card No. 355

Degreaser handles tough cleaning jobs

Safe for ferrous and non-ferrous metals, CompreVac’s Xtra-Clean is an industrial degreaser and cleaner formulated for cleaning oily and greasy surfaces such as oil rigs, engines, the oil-side of heat exchangers, pipes, vats and more. A synthetic detergent with anti-redeposition agents provides this noncaustic cleaner with a pH of 13.0. The degreaser is water-based, environmentally

Get hooked on our Cable Carrier Systems Cableveyor systems support cables and hoses that supply electrical, hydraulic and pneumatic power to moving machine parts. For more than half a century Tsubaki has been a market leader in the manufacture of this important component. The innovation and reliability you have come to expect from Tsubaki has been strengthened with the recent acquisition of KabelSchlepp GmbH of Germany. Completing the breadth of product, Tsubaki now offers complete kits including hi-flex continuous bending cables and hoses already installed in a complete Cableveyor strand. When it really matters, trust Tsubaki.

Tsubaki of Canada Limited, 1630 Drew Road, Mississauga, ON L5S 1J6 Tel: 905.676.0400 / Fax: 905.676.0904 / Toll-Free: 1.800.263.7088 e-mail: info@tsubaki.ca

Reader Service Card No. 133


24

P R O D U C T

N E W S

Machinery & Equipment MRO

continued from page 23

Large air nozzle resists corrosion

Designed for blowing heavy materials and where the device cannot be mounted close to the target surface, Exair’s 3/4 NPT stainless steel Super Air Nozzle delivers 4.5 lb of strong blowing force for blowoff, cooling and drying applications

November 2010

located in corrosive, high-temperature, food and pharmaceutical environments. The airflow cannot be blocked, as required by OSHA, and the sound level of 96 dBA is below OSHA limits. The type 316 stainless steel construction has a 32-mm (1-1/4-in.) hex body for easy installation using a standard wrench or socket. Applications include ejection of heavy parts, drying, part and machinery cleaning, chip removal, liquid blowoff and cooling hot parts. Exair

Parkrimp-style modular crimpers from Parker Hannifin can be both portable and bench-mounted. The KarryKrimp 82CCHD and KarryKrimp 2 85C-CHD crimpers can serve as bench-mounted units with the addition of a power unit (model 85C-1PH) or as mobile crimpers by adding a portable stand (model 85C-STD). The design provides faster cycle times on bench-mounted units and the ability to crimp longer bent fittings due to increased height. These crimpers help users to reduce their equipment investment and to crimp hoses on any type of jobsite. Parker Hannifin Reader Service Card No. 359

Reader Service Card No. 360

Double diaphragm pump provides energy savings

AirVantage is a high-efficiency air-operated double diaphragm pump from Warren Rupp that saves energy, improves plant efficiency and reduces maintenance costs. It reduces energy costs by cutting air consumption at the pump, and automatically adjusts as process condi-

Get Inspired.

Modular crimper offers versatility, fast cycle times

tions change to maintain constant flow without manual operation or adjustment. An adaptive microprocessor continuously manages the amount of air volume required to operate the pump at desired flow rates. The AODD pump is available in 2-in. and 3-in. pump sizes under Sand-

Get Connected.

Get Moving.

piper and Versa-Matic brand names. Warren Rupp Reader Service Card No. 361

Safety eyewear’s wrap-around design protects workers from sunlight

Sperian Protection has introduced the Uvex SolarPro safety eyewear. The style’s wrap-around design and variety of lens tint options offer good peripheral vision and comfort in outdoor applications such as construction, utility line work, landscaping, and oil and gas industries. The lenses provide 99.9% ultraviolet protection. Available in eight lens tints, including mirrored, polarized and photochromic, the eyewear reduces solar glare and eye fatigue, while its soft, padded temples and nosepiece deliver a comfortable, non-slip fit. It meets the ANSI Z87.1 safety standard. Sperian Protection Reader Service Card No. 362

Shaft collars/couplings come with choice of finish

Stafford’s stainless steel shaft collars and couplings are offered with a standard bright finish or they can be supplied with a matte finish to match machinery

and equipment design requirements. Manufactured from 303 or 316 grades, the collars come in sizes from 1/4 in. I.D. to 10 in. I.D. and the couplings in 1/4 in. I.D. to 3 in. I.D. with straight or stepped bores and keyways. One- and two-piece clamp-type and set-screw styles are available. Larger sizes, keyways, flats, hinges, threads, knurls and other characteristics are optional. Stafford Manufacturing

The Components. The Systems and Controls. Design Expertise. Today’s market demands cleaner, greener, more efficient applications. Stay competitive with the newest technologies and leading-edge education for the fluid power, power transmission and motion control industries.

Reader Service Card No. 365

All in one place, once every three years.

Las Vegas, USA

Register today: IFPE.com

March 22-26 Co-owned by the National Fluid Power Association and the Association of Equipment Manufacturers.

Reader Service Card No. 134

You have a choice of using our traditional printed reader reply cards in this issue to obtain more information, or our new Online Reader Reply Card at www.mromagazine.com/rsc — a faster and simpler way to request additional details from suppliers.


P R O D U C T

25

N E W S

November 2010

t

Guide demystifies selection of lifting magnets

Machinery & Equipment MRO

Reader Service Card No. 367

Reader Service Card No. 363

Air union withstands hostile environments

Jobsite sound system never skips a beat

Bosch’s Power Box 360 jobsite AM/FM stereo system offers 360-degree speaker configuration and a five-speaker design with an integrated subwoofer that projects highquality, enriched sound in all directions. Features include a weather-sealed digital media bay for secure storage and protection from moisture, dust and debris, a built-in SD memory card and USB ports. Also included is a built-in battery bay. Bosch 14.4-V or 18-V lithium-ion power tool batteries can be charged inside the Power Box 360. The same batteries can be used to power the unit for easy outdoor use. The rugged aluminum and rubber protective cage isolates the unit from shocks and impacts on the toughest jobsite. Bosch Reader Service Card No. 364

Barco’s E-2 Series air union is suited for any air-related manufacturing application, such as marine, oil field drilling, clutches, winches and brakes. It features a Nitrotec surface treatment, an allgaseous surface treatment process that increas-

t

A guide for identifying and selecting lifting magnets for various rious industrial applications is available from Eriez. The manual, entitled How to Choose and Use Lifting Magnets, covers topics such as the weight, shape and contact area of the objects to be lifted, surface conditions,, temperature, lift frequency, etc. Lifting magnets can be electro or permanent and can be installed and used as single magnets or as arrangements of multiple magnets. In all of these cases, a thorough knowledge of the application is essential when selecting the components to handle steel plate and shapes. The free guide can be downloaded from Eriez’ website at www.eriez.com. Eriez

valve that allows the water to flow at a minimum of 20 gpm. This high volume dilutes and completely flushes hazardous material off the body. Outdoor systems protect from freezing to minus 50°C and come with freeze and scald protection valves, interior and exterior lights, and an alarm system. Ralston CanSafe

es wear and corrosion resistance to eliminate rust build-up. The design offers a low balance ratio and a ceramic seal for long life. Sizes range from 1/4 in. to 2 in., maximum speed

is 3,500 rpm, and maximum air pressure is 10.3 bar (150 psig). Available in both US and metric threaded connections, the series is easily field replaceable using an inexpensive repair kit. Barcor Reader Service Card No. 369

MRO

Magnetic document binder keeps work orders to hand

Built to attach to such items as steel walls or machinery, the magnetic document holder from Visual Planning features a 1-in. or 1-1/ 2-in. D-ring binder mechanism. The product holds 4 lb or 100 or more three-holepunched 11-in.-wide s he et s. It i s de signed for work orders, instructions, a nd more. A f ree 128-page catalogue of mag netic products is available from the company. Visual Planning Group

Your Canadian Resource For Business Acceleration

Reader Service Card No. 368

June 21-23, 2011 | Toronto Congress Centre | Toronto, ON

Antimicrobial product protects painted surfaces

Sherwin-Williams Chemical Coatings Division is partnering with Microban International to offer liquid and powder product finishes with Microban antimicrobial product protection. This protection works continuously to inhibit the growth of bacteria that can cause stain, odour, discoloration and deterioration of the painted surface. Seven coating products currently are available with this protection, including select Polane, Powdura, Kem Aqua and Sher-Wood finishes.

Canada’s Premier Event for Advanced Design and Manufacturing Professionals Applications include wood, plastic and metal products. The product provides protection for the life of the coating; it never has to be reapplied and will not wash off or wear away. Sherwin-Williams

Featuring:

• Software

• Contract manufacturing

• Electronic components

• Equipment

• Subassemblies

• Rapid prototyping

• Motion Control

And much more!

Supported by:

Reader Service Card No. 366

Portable indoor/outdoor showers rinse off pollutants

The indoor and outdoor enclosed safety shower systems from Ralston CanSafe offer portable, engineered solutions to protect workers from harsh work environments. Each system is constructed of vacuum-formed glass-fibre and features a SpinTec showerhead, eyewash and drench hose. The shower features a stay-open ball

Co-located with:

For information on exhibiting or attending

DM-CanadaShow.com

16427_CN_DM11

Reader Service Card No. 135

Promo Code: AB


26

P R O D U C T

N E W S

Machinery & Equipment MRO

What’s new in test & measurement Leak detection kit reveals oil-based fluid leaks

Spectronics has introduced the OPK-341 industrial leak detection kit for pinpointing fluid leaks in hydraulic equip-

Reader Service Card No. 301

2D laser alignment system is easy to set up

The compact and affordable, twodimensional Microgage 2D laser alignment system from Pinpoint Laser Systems, designed for precision measuring, machine alignment, calibration and more, combines a compact laser transmitter with a receiver and digital display. Accessories allow for alignment of straightness, run out, parallelism, squareness, roll and web alignment, shaft and bore alignment, flatness measuring, etc. The system operates on batteries, and all components are machined

of solid aluminum with a hard anodized coating for wear resistance. The components are stored in a compact carrying

Laser alignment system is worn on the arm

The Fixturlaser UPADXA laser shaft alignment system is ultra-portable. Featuring all of the capabilities of the Fixturlaser XA system, this tool attaches to the arm, allowing the wearer to work in complete freedom and mobility during the entire measurement and alignment process. Features of the system include express evaluation with animated and colour display screen using 3D Macromedia Flash, express data transfer via built-in Bluetooth units, express mode incorporating inclinometers in both measurement units, and express documentation using a USB slave port. Services Techniques Claude Drouin Reader Service Card No. 305

case that can easily be carried on to the manufacturing floor. Pinpoint Laser Systems Reader Service Card No. 303

Five-in-one clamp meter delivers functionality and value

Designed for plant, HVAC/R and electrical professionals, the Extech EX623 clamp meter offers the convenience of five meters in one instrument: AC/DC ‘amp clamp’ meter, true rms multimeter, infrared thermometer, noncontact voltage detector and dual-input Type-K thermometer. The instrument accurately measures AC and DC current, voltage and temperatures for troubleshooting both new installations and preventive/ongoing maintenance and repairs. Its generous, 36-mm jaw opening handles conductors up to 500 MCM. Extech Instruments Reader Service Card No. 302

t

Multi-function pocket tachometer is versatile

brate or work loose. Tools should be calibrated and checked on a regularly scheduled calibration interval program. Mountz Reader Service Card No. 306

t

ment, compressors, engines, gearboxes, fuel and other synthetic and petroleumbased systems. The kit includes the Optimax 3000 cordless, powerful blue light LED inspection flashlight with an inspection range of up to 6.1 m (20 ft). Powered by a rechargeable NiMH battery, the flashlight has an LED life of 50,000 hours. Also included in the kit are two 16-oz twin-neck bottles of Oil-Glo 44 concentrated fluorescent oil dye, an 8-oz spray bottle of Glo-Away dye cleaner, smart AC and DC chargers, and fluorescence-enhancing glasses. The components

are packed in a rugged carrying case. Spectronics

November 2010

Dwyer Instruments’ Series TAC3 pocket tachometer measures and displays rotational speed of saw blades, grinders, engines, motors and conveyor belts. The ergonomic design provides direct line-of-sight viewing of display and target. The easyto-read, five-digit, alphanumeric, dual LCD also displays on-target, continuous measurement, laser and low battery indications. Measurements of up to 999,999 can be viewed with the onscreen multiplier. Programmable to read in English or metric units, the instrument is a 32-function tachometer/ratemeter/totalizer/counter, and timer. It can be tripod-mounted and locked on for accurate and continuous operation. Dwyer Instruments

Piston gauge is optimized for low uncertainty

Fluke Calibration has introduced the PG9607 piston gauge, which measures absolute and gauge pressures up to 500 kPa (72.5 psi). Designed according to National Measurement Institutes’ requirements, it offers features to reduce sources of pressure uncertainty, a 100 g mass load to allow a wide range of pressure defined by a single piston-cylinder assembly, and a high-performance 50-mm piston-cylinder design. The piston gauge uses DH Instruments’ AMH automatic mass handling technology to allow fully unattended testing, establishment of better reference vacuum and improved long-term mass stability. Compass calibration management software also is offered to support complete test system automation without the need for custom programming. Fluke Electronics Canada Reader Service Card No. 307

Modules enhance laser alignment system

Prüftechnik has added two expert features to its Rotalign Ultra alignment system. The Live Trend add-on module monitors movement of machines during runup or coast-down phases in order to deter-

Reader Service Card No. 308

Torque tester keeps hand tools at peak efficiency

Reader Service Card No. 136

The easy-to-use EZ-TorQ II torque tester from Mountz is a cost-effective calibration tester for verifying and calibrating all small hand torque and non-impacting torque power tools. The instrument packs a builtin transducer and graphics display into a small, portable unit, making it suitable for checking torque tools on the production floor or calibrating in the lab. Calibration of hand torque screwdrivers and wrenches, as well as power tools, avoids overtightening problems such as stripped fasteners and parts, and under-tightening problems such as fasteners that can vi-

mine the positional change over time and the influences of given events. The module uses the five-axis sensor to monitor both the vertical and horizontal parallel and angular displacement of rotating machinery. The Vibration Acceptance Check add-on module works in combination with the company’s Vibtool device to measure vibration levels according to ISO 10816-3. The RMS velocity value is transferred wirelessly and stored back on to the Rotalign Ultra system, where the result is instantly evaluated against the machine classification threshold. Prüftechnik Canada Reader Service Card No. 305


P R O D U C T

27

N E W S

November 2010

Machinery & Equipment MRO

Powerful leak detection flashlight catches all leaks

Spectronics has introduced the Spectroline OPX3000 Optimax 3000 portable fluorescent leak-detection flashlight with an inspection range of up to 6.1 m (20 ft). Its focused beam makes it easy for technicians to pinpoint all refrigerant leaks. Super-

perature sensor and a laser tachometer. The instrument uses True Amplitude to give ultrasound inspectors the ability to maintain a database of accurate sound files. Each wave file is sampled 250,000 times per second. An ultrasound detector connects to the Internet for remote access for support, training and measurement triggering. In addition, two-channel sequential measurement means fast collection of data by multiple sensors. Six base formats are available, and sensors and software can be added as needed. SDT Ultrasound Solutions Reader Service Card No. 310

Laser alignment kit is built to last for years hi-flux LED technology provides an ultra-bright light. The flashlight’s power equals that of 150watt lamps plugged into an AC power source, while this unit is rechargeable, powered by a NiMH battery with a 50,000-hour LED life. The flashlight comes with fluorescence-enhancing glasses and an AC and DC battery charger. Spectronics

Pinpoint Laser Systems has introduced the Proline alignment kit, a visual laser system for checking and measuring straightness, flatness, squareness, parallelism, levelling and more. The kit combines the features of a transit, an infinitely long straightedge and

Infrared cameras offer range of features

The HotShot HD portable infrared inspection camera, available from Electrophysics, is available in various models for temperature measurement up to 500°C. Features include sharp, 640-by-480 image details and an integrated highquality visible-light camera. The laser pointer accurately marks the temperature measurement spot at almost any distance. Also available is the EZTherm 800 series of portable infrared cameras for entry-level industrial inspection and building thermography. The two low-cost models feature point-and-shoot simplicity, an integrated visible-light camera and a large colour display. Sharp infrared images allow accurate, intuitive and precise analysis. This series is easy to operate and features a lightweight, waterproof and ergonomic housing design that is comfortable to hold. Electrophysics Reader Service Card No. 309

Reader Service Card No. 311

Dual-line display meter offers flexibility

ility PosiClean beltsdual-line display meter from Red Lion The PAX2A The effi ciency and cleanability PosiClean belts y you operate…and can input, total, minimum, maxprovide Controls will change thedisplay way you operate…and easure. imum oryou setpoints on a 0.7-in. high, six-digit main deliver savings can measure. LCD display. The main display offers three pro-

CLEAN SIMPLY

Gates Mectrol food grade belting is designed as an easy-to-clean replacement for the food processing industry. From replacing plastic modular belting to fabric belts the benefits will make you rethink the time and energy spent on conveyor belting. Plus, unlike other blue belts, Gates Mectrol food grade belting has a sealed Kevlar® or aramid cord for minimal stretch.

crevices where bacteria can take hold and grow

Positive drive with tooth

52* Sealed engagement to stay on track tension members

Gates Mectrol PosiClean belting is a dropin replacement for most 1” and 2” plastic modular belting. Thanks to the smooth design APPLICATION DRIVES you’llYOUR spend less labor and less water duringUS cleaning and sanitation processes.

The belting you now use is costing you more than you POSICLEAN think. To find out just how much you could be saving No longer do yousynchronization have to look forselect broken1” or 2” For ultimate to 36” TO SEE OUR ENTIRE URETHANE PRODUCT LINE VISIT visit www.gates.com/foodgrade and use our easy online hinges or pins may for have contaminated 4 Widths up tooth pitch.that Perfect dropping in to existing CLEAN SIMPLY REPLACE MODULAR BELTING TO SEE OUR ENTIRE URETHANE PRODUCT LINE VISIT yourmodular product chain or thatpulleys. require replacement. Gates Mectrol food grade belting is designed as an Gates Mectrol PosiClean belting is a drop® calculator POSICLEAN , FLATCLEAN™, CENTERCLEAN™ Your motor bearings will thank you as the WWW.GATESMECTROL.COM replacement for the food processing in replacement for most 1” and 2” plastic Positiveeasy-to-clean drive with tooth CENTERCLEAN POSICLEAN®, FLATCLEAN™, CENTERCLEAN™ laser alignment in one compact and portable weight is significantly less with PosiClean. It industry. From plastic modular belting to modular belting. Thanks to system the smooth design 5* engagement toWWW.GATESMECTROL.COM stayreplacing on track ®

fabric belts the benefits will make you rethink the time and energy spent on conveyor belting. Plus, blue belts, Gates Mectrol food grade Runs onunlike mostother plastic modular ® pulleys belting has a sealed Kevlar or aramid cord for minimal stretch.

WWW.GATESMECTROL.COM * PosiClean belting only

1

B sc fo te to tim G a h

4

4 Widths up to 36”

Reader Service Card No. 316

place (CIP). No matter if your sanitation schedule dictates continuous cleaning or a stop and wash United States Food and DrugTO Administration SEE OUR ENTIRE URETHANE PRODUCT LINE VISIT procedure, not having to remove the belt saves time Material Requirements: and costs. • Wet food contact

t

The belting you now use is costing you more than you WWW.GATESMECTROL.COM Cost-effective infrared 5* think. To fi nd out just how be saving = WASTE 2 grammable, easy-to-read colours:5red, orange and camera fits into much you couldWATER members 2 Sealed tension Beyond being a precious resource, water can be visit www.gates.com/foodgrade and use our easy on most BELTING plastic modular * Runs Y and edges prevent ingress of REPLACE MODULAR expensive to useonline and discard. The smooth design 6 panel meter also features a second dismaintenance program allows belting to be pressure washed while left on grade belting isgreen. designed asThe an Gates Mectrol PosiClean belting is a droppulleys microbes calculator table. On average this equates to 1/2 the cleaning cement for the food processing in replacement for most 1” and 2” plastic Positive drive with tooth engagement to stay on track

Forquieter, self-tracking positive drivelevel select is also lowering the noise onthe theCC8 or CC40. Our processing floor.tooth profile helps to maintain pulley grooves free of debris as well as easily handles high acceleration/deceleration.

you’ll spend less labor and less water during cleaning and sanitation processes.

product. Enclosed within a precision-machined housBUILT FOOD GRADE TOUGH No longer you have to look for broken ing, the dolaser produces a crisp, collimated Becauselaser downtimerefermatters and each minute of hinges or pins that may have contaminated 6 scheduled maintenance is precious, Gates Mectrol your product or that require forms replacement.a bull’s-eye pattern pulleys ence beam that for easy food grade belting has sealed Kevlar® or aramid TO SEE OUR ENTIRE URETHANE PRODUCT LINE VISIT Optional sidewalls and fl ights 7 Your motor bearings will thank you as the 3 Kevlar tension members tension members to limit belt stretch. Compared weight is significantly less with PosiClean. It available provide high strength, low to flat belting and monolithic belts, this limits the visual alignment and precise measuring. The duris also quieter, lowering the noise level on the Optional sidewalls flights 7 time you spend adjusting belting tension. Plus, stretch The efficiency and and cleanability PosiClean belts processing floor. Gates Mectrol polyurethane construction is water able components, which are stored in aandcarrying case, available chemical resistant – ready to stand up to the provide will change the way you operate…and harshest of cleaning products. are machined from solid aluminum with stainless ULTIMATE CERTIFICATION * PosiClean belting onlyyou can measure.7 deliver savings United States Department of Agriculture steel parts and protected by a hard anodized coating. Equipment Acceptance: LEAVE IT TO CLEAN IT • Meat and poultry processing equipment Designed specifically for wash down environments, Pinpoint Laser Systems 7 • Dairy equipment Gates Mectrol food grade is ready to be cleaned in

IT ALL ADDS UP.

FOOD GRADE

A poultry processing plant asked FLATCLEAN™ Gates to replace plastic modular Fraying edges on flat belts are a thing of the United States conveyor belts with an effi cient Department of Agriculture past. 0.125 inch thickness control makes FC12 Equipment Acceptance: cleaning and sanitation solution. • Meatsaves and poultry Converting to PosiClean them processing equipment today’s choice when time and money matter. • Dairy equipment $148,000. Per Year. ®

ULTIMATE CERTIFICATION

CUSTOMIZATION, FLATCLEAN POSICLEAN

Material Requirements: • Wet food contact

$19K

+ $27K

Water usage and wastewater disposal savings

that could fall of the belt, select a sidewall on one or both sides. Accordion shape allows the belt to smoothly go around the pulley without putting stress on the flange.

FOOD GRADE BELTING

Labor Savings

YOUR APPLICATION DRIVES ® US POSICLEAN , FLATCLEAN™, CENTERCLEAN™

+

Savings from not heating 4,452,000

® POSICLEAN gallons - amount of

$102K synchronization water saved For ultimate select 1” or 2” tooth pitch. Perfect for dropping in to existing modular chain pulleys.

EASIER CLEANING CENTERCLEAN For self-tracking positive drive select the CC8 or LIMITED STRETCH CC40. Our tooth profile helps to maintain pulley ™

* PosiClean belting only

Form No. xxxx 8/10

L

D G p d p a

Add a flight at whatever interval necessary to Here’s how their savings stacks up: United States Food and Drug Administrationcarry your product up an incline. For product

play line, featuring a 0.35-in. high, nine-digit green Suitable for entry-level industrial time and 45% reduction in water usage and the cost modular belting. Thanks to the smooth design sidewalls and flights 7 water disposal. Add this to not having to heat as 3 Optional you’ll spend less labor and less water during which also is programmable and acinspection and building thermog- ofmuch water and the savings really add up. available $148K in annual savings cleaning and sanitation processes. grooves free of debris as well as easily handles elts,stretch Gates Mectrol food grade FOOD GRADE TOUGH EZTherm 800 commodates totalizing applications that easily ex- BUILTraphy, the low-cost series REDUCED TIME AND EXPENSE IT ALL ADDS UP. high acceleration/deceleration. EASIER CLEANING d Kevlar or aramid cord for No longer do you have to look for broken Because downtime matters and each minute of A poultry processing plant asked hinges or pins that may have contaminateda three-digit scheduled ceed a six-digit display. In addition, of portable infrared cameras features maintenance is precious, Gates Mectrol FLATCLEAN Gates to replace plastic modular your product or that require replacement. food grade belting has sealed Kevlar® or aramid Fraying edges on flat belts are a thing of the belts with an efficient 7 unit 3 LIMITED STRETCH motor bearings will thank you as programmableYour custom also istheavailable. The tensionpoint-and-shoot simplicity, an conveyor integrated members to limit belt stretch. Compared past. 0.125 inch thickness control makes FC12 cleaning and sanitation solution. weight is significantly less with PosiClean. It to flat belting and monolithic belts, this limits the today’s choice when time and money matter. Converting to PosiClean saves them is also quieter, lowering the noise level on the dual-line display meter provides universal func- time youvisible camera and aPlus,large colour display. spend adjusting belting tension. $148,000. Per Year. REDUCED TIME AND EXPENSE processing floor. CUSTOMIZATION Gates Mectrol polyurethane construction is water Add a flight at whatever interval necessary to tionality, including universal The resistant EZTherm 875upand proand chemical – ready to stand to the 881 cameras 4 input. Here’s how their savings 1 carry your product up an incline. For product harshest of cleaning products. stacks up: duce sharp images, providing accurate, inthat could fall of the belt, select a sidewall on RTIFICATIONRed Lion Controls one or both sides. Accordion shape allows the United States Department Agriculture Card No. 312 Reader ofService tuitive and precise analysis of thermal belt to smoothly go around the pulley without Form No. xxxx imEquipment Acceptance: LEAVE IT TO CLEAN IT 8/10 putting stress on the flange. Water usage • Meat and poultry processing equipment Designed specifiThey cally for wash down environments, ages. are easy to operate and feature $19K and wastewater 2 • Dairy equipment Gates Mectrol food grade is ready to be cleaned in 5 disposal savings place (CIP). No matter if your sanitation schedule Roll alignment a lightweight, waterproof and ergonomic dictates continuous cleaning or a stop and wash + Labor Savings EASIER CLEANING United States system Food and Drug works Administration procedure, not having to remove the belt saves time $27K to hold. housing design that is comfortable fast Material Requirements: and costs. • Wet food contact 3 The RollCheck laser alignElectrophysics LIMITED STRETCH from not 6 FASTENING/INSTALLATION heating 4,452,000 + No.Savings ment system speeds up Reader Service Card 317 OPTIONS gallons - amount of WATER = WASTE REDUCED TIME AND EXPENSE $102K water saved Beyond being a precious resource, water can be alignment checks and • Vulcanized Weld – For the strongest end expensive to use and discard. The smooth design connection, weld the belt. Specify your length and allows belting to be pressure washed while left on the replacement of rolls Data collector offers the factory will weld or for the convenience of on-site table. On average this equates to 1/2 the cleaning installation, select Gates field welder for a simple time and 45% reduction in water usage and the cost in the processing indusintuitive operation butt weld. PosiClean is extremely length stable of water disposal. Add this to not having to heat as eliminating the need for retensioning. much water and the savings really add up. $148K in annual savings try. The laser transmitter and reflector sit on The Vibxpert II two-channel data • Field Weld – PosiLace™ – When there isn’t precision bases, and are either strapped on or collector and FFT signal analyzer is available from lot of take-up your conveyor or when you The belting you now aneed use isoncosting to remove the belting, PosiLace is your magnetically mounted to the roll surface, allowing Prüftechnik, featuring a high degree of ergonomics answer. On PC20, a single pin limits the chance for you more than you think. To find out just contamination while allowing for simple removal. the user to project two lines, one horizontal, the other and speed. The VGA colour screen with over 200,000 • Mechanical Fasteners – From wire hooks how much you could tobe saving visitfasteners are metal staples, standard conveyor vertical, on to the corresponding reflector unit. Withcolours creates a clear graphics-based user interface, available when metal contamination isn’t an issue. in two minutes of attaching the two components to and the ergonomically shaped housing makes the dewww.gates.com/foodgrade and use adjacent rolls, the user can determine the alignment vice comfortable to use. Lower measurement times our easy online calculator. of the rolls. The devices can remain in place while than with the earlier model are achieved through the Form No. xxxx adjustments to the roll are performed. The laser use of updated processor technology 8/10 and by optimizlines are green, which is a much brighter colour to ing internal measurement processes. The 2-Gb data the operator than red, and they provide a sharp, memory and long-life lithium ion batteries allow data For more information, contact us at crisp visibility. The system is lightweight, compact, collection of up to eight hours without interruption. durable and easy to use. Applications include paper Prüftechnik converting, films, roofing materials, steel, printing, Reader Service Card No. 318 MRO textiles and paper recycling. Seiffert Industrial Sales You have a choice of using our Reader Service Card No. 315 traditional printed reader reply cards in this issue to obtain more information, or Ultrasound data collector our new Online Reader Reply Card at www. includes powerful database mromagazine.com/rsc — a faster and Designed for PdM and reliability professionals, the simpler way to request additional details from suppliers. SDT270 ultrasound data collector includes an onReader Service Card No. 137 board SQL database, in addition to a built-in tem-

acing plastic modular belting to

tension members 3efitsKevlar will make you rethink the 5 display, 6LCD high strength, entprovide on conveyor belting. Plus,low ®

B

and edges prevent ingress of 6* microbes Runs on most plastic modular

1 Smooth surface is free of crevices where bacteria can take hold and4grow

REPLACE MODULAR BELTING

FOOD GRADEBELTING BELTING FOOD GRADE

Smooth surface is free of 1 4 Widths up to 36”

*

T th v c

W

B e a ta tim o FASTENING m

OPTIONS

• Vulcanized connection, wel the factory will w installation, sele butt weld. PosiC eliminating the n

• Field Weld – a lot of take-up need to remove answer. On PC2 contamination w

• Mechanical to metal staples available when

t

Form No. xxxx 8/10

EASIER CLEANING LIMITED STRETCH REDUCED TIME AN


28

P R O D U C T

N E W S

Machinery & Equipment MRO

November 2010

What’s new in drives and motion control

Lightweight linear shafting has attractive pricetag

Thomson’s Ultra Light LinearRace shafting combines reduced system weight with smooth linear motion. It is constructed of 6061T6 aluminum with an HRC 70 hard anodized finish, and is available in inch sizes ranging from 0.25 in. to 1.0 in. and in lengths up to 120 in. Metric sizes are available upon request, as are special machining options. The shafting can be used with the company’s self-lubricating FluoroNyliner bushings for applications with heavy loads, high contamination and corrosive environments. It also can be paired with food-grade bearings for use in food processing, pharmaceutical and medical applications. Thomson

Modular motor system offers a multitude of options

SEW Eurodrive’s modular DR motor system offers many drive combinations. Well-suited for almost any industry, the system allows users to specify exactly the options needed for any given application. It meets and exceeds international energy standards and comes in three efficiency levels. The standard efficiency model DRS has fractional hp, the NEMA Premium Efficiency model DRP has 1 hp to 50 hp, and the High Efficiency DRE, 1 hp to 300 hp. The built-in encoder is fully integrated into the motor, making it more compact and less expensive. The

Reader Service Card No. 337

Reader Service Card No. 335

AEM_4840_IFPE_EduAd_2011_7x10_FNL.pdf

1

8/13/10

t

system finds application in the food and beverage, water and wastewater, automotive, packaging and logistics industries, and many more. A wide variety of mounting capabilities is available. SEW Eurodrive

Gear reducer boosts system efficiency

The Grove Gear IronMan E series gear reducer operates at 90% efficiency to maximize system effectiveness. It features a compact housing design that offers a direct replacement for worm gear re-

3:10 PM

Get Inspired.

Get Connected.

Get Moving.

ducers, and mounting base kits allow drop-in replacement of multiple sizes. Four models of gear reducer are available, with double reduction ratios from 7.8:1 to 60:1 and power capability to 8.5 hp. Triple reduction units are available by adding a ratio multiplier. Features include helical-bevel gear technology, synthetic lubricant, covers sealed with o-rings and Viton double-lip seals. Grove Gear Reader Service Card No. 336

High-power drive broadens application flexibility

Rockwell Automation has expanded the power range of its Allen-Bradley PowerFlex 755 AC drives to 450 kW (700 hp), giving users increased flexibility in motor-control applications in a variety of heavy industries, such as oil and gas, tire and rubber, refining, material handling, and metals and mining. Features include roll-out capability for fast installation and maintenance, modular design for easy replacement of drive components, and advanced diagnostic capabilities, including indication of blown fuses and surge protectors. The drive comes equipped with an embedded Ethernet port and five option slots. Rockwell Automation

C

M

Reader Service Card No. 339

Y

CM

MY

CY

CMY

K

STAY AHEAD OF THE TECH CURVE Learn the “next thing coming” solutions to integrate now into your design applications. Over 100 education presentations will focus on the newest technologies, research and developments for the fluid power, power transmission and motion control industries. All in one place, once every three years.

Drive easily handles changing operating speeds

The Zero-Max adjustable speed drive with the Micro Dial feature provides accurate and repeatable speed settings, allowing users to accurately set and re-set various speeds to meet performance levels for different applications, such as seeder cart settings for different grains and precise speed control in textile winding machines. Accepting input speeds

Register Now: IFPE.com

Las Vegas, USA

March 22-26 Co-owned by the National Fluid Power Association and the Association of Equipment Manufacturers.

Reader Service Card No. 138

from 0 rpm to 2,000 rpm, the drive allows changes to its output speed to be made quickly and easily, whether the machine is running or not. It provides speed control for inputs from 1/4-hp to 1-1/2-hp applications with output torque ratings from 12 in.-lb through 200 in.-lb, and can be used as a prime mover connected to a motor, or as a secondary drive connected to a shaft in the machine’s drive line. Zero-Max Reader Service Card No. 341

MRO


L I T E R A T U R E

Advertising Feature

MACHINERY AND EQUIPMENT

Free MRO Product

Literature Guide NEW PULLEY CATALOG “B216” BRECOflex’s new B216 pulley catalog offers made-to-order and stock pulleys. The new domestic “CNC” pulley maufacture allows for precise machining standards, leading to superior product quality and quick product availability. BRECOflex now provides finished custom precision pulleys and stock pulleys with pilot bores, for immediate delivery. Custom pulleys include backlash, reduced backlash “SE” or zero backlash “0” tooth gap design. Call for our free engineering support! BRECOflex CO., L.L.C. 888-463-1400 or 732-460-9500, Email: info@brecoflex.com

DRIVES, LLC PRODUCT YOU NEED, SERVICE YOU EXPECT. Extended Life CHP™ hard chrome plated pins possess standard steel’s metallurgical properties for toughness and strength while delivering an extremely hard wear-resistant pin surface. CHP chain pins resist wear longer than standard heat-treated pins, even in dry and abrasive environments. Contact Drives, LLC for more information on Extended Life CHP™ series chains. Visit our website, www.drivesinc.com, today. DRIVES, LLC Circle Reply Card No. 272

A new 18-page brochure outlines the advantages of premium efficiency Baldor_Reliance Super-E® motors, which meet or exceed NEMA premium efficiency standards. Baldor’s BE$T (Baldor Energy Savings Tool) software, included with the brochure, can compare the operating cost of industrial electric motors with Baldor-Reliance motors. For a free copy, contact a Baldor District Sales Office, or visit www. baldor.com/suppor t/literature_ request.asp, complete the form, then click on ‘Energy.’ BALDOR Circle Reply Card No. 277

CLEARANCE, MOUNTING AND LUBRICATION GUIDE NSK is dedicated to delivering value added information to keep your facility both efficient and productive. To help maximize uptime and lower maintenance costs, keep a copy of our reference guide for bearing ‘must-knows’ on: • Types and Tolerance Classes • Fits • Radial Clearance • Selecting the correct lubrication • Lubrication consistency • Mounting For more information, visit us at www.ca.nsk.com or contact us at info@ca.nsk.com or 1.877.994.6675 NSK Circle Reply Card No. 273

MILL SUPPLIES AVAILABLE AT KINECOR!

TECHNICAL SERVICES NOW OFFERED BY TSUBAKI!

Kinecor recently launched a new line of mill supplies throughout more than 60 branches across Canada. We have the tools you need for critical maintenance and repair work, from lubricants, paints and abrasives to industrial fans, flashlights and hand tools.

Tsubaki’s Technical Services staff is available for on-site inspections and can recommend the best solution for your application. A partial list of our services includes the following: On-Site Services • Maintenance Seminar • Critical Application Survey • Application Troubleshooting In-House Services • Facility Tours • One Day Seminars • Failure and Wear Analysis • Sample Identification Contact Tsubaki at info@tsubaki.ca for the complete list and to see how our Technical Services can help you best.

For more information, please consult our mill supplies brochure at www.kinecor.com or contact us at 1-866-KINECOR. KINECOR Circle Reply Card No. 275

BRECOFLEX Circle Reply Card No. 274 ENERGY SAVINGS BROCHURE

29

G U I D E

TSUBAKI Circle Reply Card No. 276 BELT DRIVE PREVENTATIVE MAINTENANCE & SAFETY PROGRAM Gates is dedicated to providing reliable information to keep your facility running safely at optimum capacity. When compared to the maintenance and replacement costs of roller chain or gear drives, belts can be the most cost-effective and reliable power transmission solution. An effective preventive maintenance program consisting of a safe working environment, proper belt drive installation, inspection and performance evaluations will continue to keep costs down. Let Gates help increase your facility’s uptime and avoid costly belt drive failures. Visit www.gates.com

LOCTITE® DO-IT-RIGHT USER’S GUIDE This 40-page User’s guide is designed to help the Maintenance Professional with the proper selection and use of Loctite® products. A wide variety of preventive maintenance, as well as repair techniques, is explained in step-by-step detail. This can be considered a supplemental service manual for every piece of equipment in your plant. LOCTITE Circle Reply Card No. 279

GATES Circle Reply Card No. 278 KNOWLEDGE-ENGINEERED LUBRICATION SOLUTIONS FROM SKF Some 36% of premature bearing failures are caused by incorrect specification or inadequate application of lubricant. Preventing such failures means delivering the right lubricant, in the right amount, at the right time, to the right lubrication point. With over 100 years of rotating machinery expertise, SKF delivers a complete line of lubrication solutions to do exactly that. SKF Circle Reply Card No. 280

SPHERICAL ROLLER BEARINGS THAT SAVES YOU MONEY AND TIME The FAG X-life series E1 spherical roller bearings provides optimum operating life far beyond conventional values. With our optimized roller geometry and raceway finish, operating life is increased up to 70%, reducing downtime and maintenance costs. That is why you will find our bearings in all kinds of applications where heavy loads have to be accommodated or where shaft deflections or misalignments of bearing seats must be compensated for. They operate in the harshest environmental conditions, for example in gearboxes, paper machines, construction machinery and vibrating machinery. INA/FAG Circle Reply Card No. 283

WE MAKE IT EASY FOR YOU TO MAKE THE RIGHT CHOICE! More than 50 years of experience in power transmission — more than 40 KTR locations throughout the world. As a global leader in the manufacture of couplings, clamping sets, torque limiters, torque measuring systems and hydraulic components, we are the right partner for all those who want to set things in motion. www.ktr.com KTR CORPORATION Circle Reply Card No. 281

NTN ULTRA CLASS BEARING UNITS NTN Bearing Corporation, a leader in the supply of bearing units, also offers the Ultra Class Mounted Unit series. NTN’s research, along with extensive experience in original equipment and the aftermarket, has led to the development of a unit with unique features that take mounted units to an elevated level of design and performance. For more information on Ultra Class Bearing Units, or on our wide range of bearing products, visit us at www.ntn.ca NTN BEARING CORPORATION Circle Reply Card No. 284

KOYO CANADA ADDS NEW LINE OF NEEDLE ROLLER BEARINGS Koyo Canada now offers the full range of Torrington® needle roller bearings and cam followers from stock, in metric and inch sizes. Bearings can be ordered pre-lubricated to reduce assembly time and in bulk packaging which cuts down on material waste. Contact your local authorized Koyo distributor or Koyo Canada for more information at 1-800-263-5163, www.koyo.ca. KOYO Circle Reply Card No. 282

NORD EXPANDS RANGE OF ‘SCP’ SCREW CONVEYOR DRIVE Nord Drivesystems has added an additional size to their very popular ‘SCP’ line of CEMA compatible screw conveyor drives. Now with seven sizes with output torque capacity to 32,475 lb.in. Many options and styles including right angle are available. Contact Nord at info@nord-ca.com for complete information. NORD GEAR Circle Reply Card No. 285


M R O

O N

T H E

R O A D

Machinery & Equipment MRO

EPTDA’s 2010 convention in Malta breaks attendance records

November 2010

2

More than 280 power transmission and motion control professionals participated in over 750 individual meetings that took place between manufacturers and distributors during the event’s MD-IDEX session. Brussels, Belgium – EPTDA (the European Power Transmission Distributors Association), an association for the industrial distribution channel in Europe, has hosted another successful industry summit. The event was held in Malta, and drew over 280 participants from around the world. Among the delegates were 63 firsttimers, nine non-member companies and 30 international guests from the US, Canada, South Africa, Egypt, Japan and other countries. EPTDA’s MD-IDEX (Manufacturer Distributor Idea Exchange) sessions facilitated over 750 individual meetings between manufacturers and distributors, the highest ever in its history. The association also hosted its first ever Next Generation event at the Annual Convention, welcoming more than 40 young business potentials and aiming to attract future talent to invest, engage and get involved in the power transmission/motion control (PT/MC) industry. “We are extremely proud of the success of our association and the Annual Convention in Malta,” said EPTDA’s newly elected president, David Harrow, managing director of Godiva Bearings in the United Kingdom. “The positive energy amongst the members, a strong belief in the benefits that we offer to them, and growing interest from other industry leaders to join us, signals that we are moving ahead on the road to recovery, and helping PT/MC leaders to grow profitably.” EPTDA’s 2010 Annual Convention was themed ‘Our Future’, and featured prominent strategic thinkers and entrepreneurs, including Daniel Burrus and renowned economist Alan Beaulieu, who shared the insights on lessons learned in the past, and an outlook for the future. While Burrus focused on the impact of technological development on the industry, Beaulieu (who is known for a magical 96% accuracy in economic forecasting) showed the audience which markets to watch, markets to avoid, where to invest, which industries to move into, and more. Supplementing this futuristic outlook, retail expert Prof. Dr. Joachim Zentes emphasized the role of innovation as the key to success from both the macro- and micro-economic perspectives. One of the most successful highlights of this year’s convention were the company visits organized in co-operation with Malta Enterprise. The executive chairman of Malta Enterprise, Alan Camilleri, was a guest of honour at the annual business meeting and welcomed participants to explore the trade and economic strengths of Malta, a small but promising business hub that is already home to several multinational enterprises, such as Lufthansa Technik Malta Ltd., Trelleborg Sealing Solutions, Methode Electronics,

Hetronic Malta, Vodafone, and others. “Our aim is to add value to our members’ business and help them succeed,” said Hans Hanegreefs, executive vicepresident of EPTDA. “Malta boasts many achievements across numerous sectors, including pharmaceuticals, mechanical engineering, electronics, maritime products, yacht services, biomedical equipment, aircraft maintenance and many

3

1

4

other industries that are directly or indirectly related to the PT/MC industry. The company visits are another innovative initiative by EPTDA to share information and knowledge that can be vital to our members’ business growth,” he added. EPTDA has announced a strategic partnership with CHI Hotels & Resorts to offer privileged rates for business and leisure hotel stays for all EPTDA members. Corinthia Hotels’ CEO, Tony Potter, announced the partnership and discussed the strengths of Corinthia Hotels as a special guest of honour at a glamorous Gala Dinner hosted at the Palazzo Parisio in Malta. As a yearly tradition and to show a strong commitment to responsible business, EPTDA’s members joined hands to donate EUR 7,400 to the Maltese charity Puttinu Cares Children’s Cancer Support Group. EPTDA is the largest organization of distributors and manufacturers of power transmission and motion control products in Europe. It represents nearly 200 companies of the industry. Founded in 1998, EPTDA’s mission is to advance distribution and strengthen members to be successful, profitable and competitive in a changing market environment. It is dedicated to providing its members with information, education and business tools required to profitably meet the needs of the industrial marketplace. This year alone, EPTDA attracted 11 new members to its association, and following the Malta convention, several non-members expressed their willingness to join the association. EPTDA’s 2011 Annual Convention will be hosted in Budapest, Hungary, at the Cor inthia Hotel, September MRO 28-30, 2011. For additional information, contact Hans Hanegreefs: e-mail h.hanegreefs@eptda. org or tel. +32 2 709 22 12 in Belgium.

5

1. David Harrow (left) takes over as EPTDA president from Manfred Beitel. 2. The closing keynote session drew a large crowd. 3. The newly elected EPTDA Board of Directors for 2010-2011. 4. MD-IDEX sessions proved more popular than ever in Malta. 5. EPTDA’s firstever Next Generation event featured the Next Generation Quiz.

Photos courtesy EPTDA

30


We see less downtime in your future. At NTN, we are dedicated to help you get the most out of your rotating machinery. Our people contribute to this vision every day. Invite us to roll up our sleeves with you.

Reader Service Card No. 139


UNMATCHED ENGINEERING EXCELLENCE FROM THE SCHAEFFLER GROUP PowerTherm Induction Heaters Many rolling bearings and other rotationally symmetrical parts made from steel have tight fits on the shaft. Larger bearings and parts - in particular - can be mounted more easily if they are heated first. Induction heating is superior to the conventional methods, and particularly suitable for batch mounting. Heating is carried out on complete bearings, rings for cylindrical roller or needle roller bearings and rotationally symmetrical steel parts such as labyrinth rings, roll couplings, etc. Advantages • Quick, safe and energy-efficient operation • Environmentally friendly - no disposal required • Uniform, controlled heating • Automatic demagnetization For the mounting of bearings and parts with a mass up to 300 kg, Schaeffler supplies five FAG brand table-top heating devices -

Driven to Extremes The constant evolution of capacity and efficiency in the field of power transmission increases the standard to be achieved in technical product design. And in the selection of technology partners. Drawing from years of close collaboration with designers and manufacturers, Schaeffler Group implements the latest technology into compact and powerful INA and FAG bearing design solutions. From industrial gears and transmissions to wind turbines and modern rail applications, Schaeffler is driven by innovation and operational reliability to achieve extreme standards of performance.

SCHAEFFLER GROUP

PowerTherm HEATER10 to 300 - suitable for mobile and/or stationary use. For parts with a mass as great as 3,000 kg, Schaeffler offers and recommends heavy duty standalone devices. Reader Service Card No’s. 140

Transport and Mounting Tool BEARING.MATE BEARING.MATE is an accessory used for the safe quick and easy handling of medium-sized and large rolling bearings. It can also be used where bearings are heated prior to mounting. The tool is comprised of two handles and two steel strips. Turning the handles clamps the steel strips firmly on the outer ring of the rolling bearing. The compact packaging also includes two brackets to be used when handling spherical roller bearings and selfaligning ball bearings. The clamps secure the bearing in order to prevent tilting of the inner rings. The tool and bearing can either be carried by two people or by crane using slings (ordered separately). If two carrying slings are used, the rolling bearing can be rotated to any position when transported by crane. During heating on an induction heating device, the BEARING.MATE remains mounted on the bearing. The steel strips expand uniformly with the bearing, maintaining optimum tension. BEARING.MATE is recommended for use in conjunction with bearings weighing as much as 500 kg, and can tolerate heating temperatures as high as 160° C. It is available in three different sizes that can be matched to bearing outside diameters ranging from 250 to 850 mm.

For additional information about PowerTherm induction heaters or BEARING.MATE, contact your local Schaeffler representative or visit www.fis-services.com

INDUSTRIAL

Reader Service Card No’s. 142

www.schaeffler-group.com Reader Service Card No’s. 141


FREE INFORMATION! FREE SUBSCRIPTION!! To receive FREE information circle the numbers on the card below that correspond to the number found on the product(s) that interest you. Fully complete the card below and be sure to print clearly so your request can be processed accurately. Print out and fax/mail this card today! For faster service fax to (416) 510- 6875 Please provide your e-mail address to receive the MRO Newsletter full of Industry and Product News. MRO will also update your subscription via e-mail.

FREE INFORMATION / FREE SUBSCRIPTION — READER REPLY CARD Don’t miss any of our upcoming issues

RENEW YOUR SUBSCRIPTION TODAY!

Name:_ _______________________________________________ Title:_______________________________ Company Name:___________________________________________________________________________ Address:___________________________________________________________________________________ City:______________________________ Prov.________________ Postal Code_ _______________________ Is this an address change: q no q yes Number of employees at this location is:

I want to receive MRO magazine FREE of Charge. Yes

100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115

132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147

q Digital_ q Print q Digital & Print

Signature_ _______________________________ Date___________________________ E-mail___________________________________________________________________

No

116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131

Select your format:

Phone____________________________________Fax____________________________

148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163

164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179

180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195

196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211

212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227

228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243

244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259

MAIL OR FAX TODAY:

260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275

276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291

292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307

308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323

324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339

340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355

356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371

372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387

388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403

404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419

420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435

WHAT IS YOUR JOB FUNCTION? (Check all that apply) q Mechanical Maintenance q Electrical Maintenance q Operations Engineering

q Operations Management q Purchasing

MY COMPANY’S MAIN BUSINESS ACTIVITY AT THIS LOCATION IS: q Agriculture, Fishing, Forestry q Mining, Quarrying & Oil Well q Construction

q Electrical & Electronic Equip. q Transportation Machinery q Instruments, photo & medical goods q Misc. Manufacturing q Transportation Services q Communications Services q Electric Power, Gas & Sanitary Serv. q Goverment

MANUFACTURING q Food Products q Tobacco Products q Textile Mills q Finished Fabric Products q Lumber & Wood Products q Furniture & Fixtures q Paper & Allied Products q Printing, Publishing q Chemical Products q Petroleum Refining Product q Rubber & Plastic Products q Leather Products q Stone, Clay, Glass & Concrete q Primary Metal Industries q Fabricated Metal Products q Industrial & Comm. Machinery

WHOLESALE TRADE q Electrical Apparatus & Equipment q Construction & Mining Machinery q Industrial Machinery & Equipment q Industrial Supplies q Misc. Wholesalers SERVICES / OTHER q Retail q Electrical Repair Shop q Welding Repair q Armature Rewinding q Misc. Repair Shops q Misc. Services Incl. Engrg Serv.

PLEASE INDICATE WHICH OF THE FOLLOWING PRODUCTS YOU ARE PLANNING TO PURCHASE OVER THE NEXT FEW MONTHS. A q Aerial Work Platforms/Lifts B q Automation Components C q Bearings – to 3” D q Bearings – over 3” E q Bearings – Split Roller F q Linear Bearing/Systems G q Gaskets & Seals H q Geared Motors/Speed Reducers

I q Variable Speed Drives J q Electric Motors K q Roller Chain/Sprockets L q Drive Belts M q Air/Hydraulic Hose N q Air/Hydraulic Cylinders O q Air/Hydraulic Filters P q Air/Hydraulic Valves Q q Fittings & Couplings

R q Lubricants/Equipment S q Overhead Hoists/Cranes T q Compressors U q Analytical/Diagnostic Inst. V q Maintenance Software W q Casters X q Protective Clothing Y q Hand & Power Tools Z q Safety Equipment

416-510-6875 MRO Reader Enquiry Department 12 Concorde Place, Suite 800 Toronto, ON M3C 4J2

2010

LK


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.