Control and safety in robotic cell project

Sysmac platform helps Innovair Automation provide seamless control and safety in Dimatec robotic cell project.

Innovair Automation, an automation company specializing in installing and servicing robotic solutions, recently took on a robotic cell project with Canadian manufacturer Dimatec Inc., a manufacturer of metal-bond diamond tools and related drilling equipment.

Dimatec first invested in robotics solutions 10 years ago, and has since installed a total of seven robotic cells.

The robotic cell consists of a robotic arm that loads and unloads drill bits from furnaces that could reach temperatures up to 2000°F and then puts them into a press. Conveyance systems, sensing, and safety technology also form part of the operation system. As these operations were previously performed manually, this robotic cell has the dual benefit of improving efficiency, while eliminating manual activities that would require operators to be near the extremely hot furnaces.

Innovair chose to work with Omron Automation Americas, whose technologies speak common industrial protocols used by robots, such as EtherCAT, CIP Safety, Modbus, and EtherNet/IP.

The need

As the inventor of the diamond-coated drill head, Dimatec had a process that had proven its merits for several decades. For this reason, the manufacturer sought to conserve as much of its existing equipment as possible in the new robotic cell. The purpose of the cell was to automate time-consuming manual processes that were requiring operators to work in the proximity of hot furnaces. Innovair turned to Omron for seeking an efficient control solution that would eliminate time-consuming manual process, as well as implement flexible technology that was easy to retrofit onto the existing equipment. In particular, the automation partners wanted to design safety mechanisms to provide the highest degree of protection for operators, while causing minimal disruptions to the process. Since the robots in the cell needed to move through the light curtain detection areas to access specific points near conveyors, muting functionality was important.

The solution

The new robotic cell incorporates a complete PLC application that brings together control, sensing, robotics and safety to pick up parts from the conveyors without pause. Everything is programmed within Sysmac Studio – Omron’s automation platform that provides one connection for motion, logic, vision, safety and more – using a widescreen Omron NA5 HMI. The Omron technologies in the cell run on EtherCAT, while other technologies use EtherNet/IP or Modbus.

Innovair implemented Omron light curtains with a muting function and the NX-SL3300 safety controller. When works-in-progress hit a certain point at the end of the conveyor, Omron E3Z sensors send a signal to the PLC prompting a robot to go pick up the product. The PLC simultaneously mutes the light curtain so that the robot can pass through without triggering it.

The outcome

According to Innovair, the ultra-fast EtherCAT speeds and the all-encompassing Sysmac platform makes the new robotic cell efficient and flexible. Sysmac’s single connection makes it possible to program everything from a single development interface, and variables can be shared effortlessly from the HMI to the PLC. The control cabinet can be left closed during programming thanks to the single Ethernet connection, and this prevents issues with lockout/tagout. The light curtain system has been running for about a year, and Innovair is pleased with the muting function that makes it possible for robots to easily access the conveyors when necessary. Innovair also appreciated Omron’s commitment to thorough training and support, including remote troubleshooting in real time. MRO

WHAT’S NEW IN PRODUCTS For more product news, visit www.mromagazine.com/products

Mobile sanitary conveyer bag dump system

Flexicon’s sanitary mobile tilt-down screw conveyor with integral bag dump station and compactor allows the transfer of material manually dumped from handheld bags into elevated process equipment, and the disposal of empty bags.

Mounted on a mobile frame with locking casters and a fold-down step, the bag dump station is secured to the floor hopper with clamps, and features a gasketed bag disposal chute through the side wall of the hopper hood.

The hopper discharges into an enclosed, 15 feet screw conveyor, handling materials including free- and non-free-flowing bulk solids. www.flexicon.com

Posital rotary encoders

Posital’s models of its IXARC rotary encoders feature housings that are 27 millimetres long.

This reduced length is combined with a diameter of 36 mm. The radial cable entry and shaft seal have protection ratings of IP65.

The compact encoders are based on Posital’s magnetic measurement technology. Both incremental and single-turn absolute versions are available. Incremental variants are programmable: resolution can be set anywhere from one to 16,384 pulses-per-turn in software.

Pulse direction and the output driver, either Push-Pull (HTL) or RS422 (TTL), can be reset through software updates.

www.posital.com

Creaform’s additions to its R-Series lineup

Creaform launched additions to its R-Series lineup, including a new MetraSCAN-R BLACK | Elite HD, and edition of VXelements designed for longterm support (LTS).

Features include:

• MetraSCAN-R BLACK I Elite HD offers a field of view for increased performance levels during challenging applications, such as 3D measurements on sheet metal parts. • With its 69 laser lines and 3,000,000 measurements/s, this specialized 3D scanner is for parts with many edges, trims, and boundaries. • The intuitive VXscan-R software module makes it possible to include the custom features of your 3D scanning CMM (enclosure, robot base, turntable, etc.). www.creaform3d.com

Flir Bridge for condition monitoring

Teledyne Flir introduced Flir Bridge for condition monitoring applications, designed for organizations to route asset health data into preferred data management systems.

The Flir Bridge is available in two options: • Flir Bridge Pro: Includes the ability to apply filters to the incoming data, including custom alarm and alert settings, such as those based on standard deviations or Fourier

Transforms. • Flir Bridge Standard: Offers connection to up to five Flir devices or third-party fixed sensors along with the same data filtering capabilities as Bridge Pro.

www.flir.com

MagnaShear motor brakes

The MagnaShear motor brake from Force Control Industries employ oil shear technology, providing longer service life in applications like the frequent start/stop cycles seen on conveyors, cranes, hoists, winches, and other material handling equipment.

Proven oil shear technology transmits torque between lubricated surfaces, thereby eliminating wear on friction surfaces. A patented fluid recirculation system dissipates heat, eliminating heat build-up. The oil shear technology provides a “cushioned” stop, which reduces shock to the drive system, further extending service life of downstream components.

www.forcecontrol.com

Clean Aire HEPA and Carbon Filtration Paks

CleanAire HEPA and Carbon Filtration Paks are designed to be mounted inline in the exhaust ducting from a fume hood or contaminant source, up to 1500 cubic feet per minute.

The filter pak includes a galvanized steel housing with hinged and gasketed access door for filter change-out and molded composite resin inlet and outlet plenums, with duct connection collars sized to meet specification.

Both filters include a 30 per cent pleated pre-filter, and can be paired together for applications that require particulate and fume removal.

www.hemcocorp.com

The Podcast for MRO Professionals

The podcast features conversations with industry experts about maintenance, reliability, repair, asset management, safety and operations. Topics that are of utmost importance to MRO readers.

Previous guests and topics have included:

• Kevin Wright, Country Manager, igus Canada Inc - The importance of plastic products in MRO; • Dr. Rafiq Ahmad, Assistant Professor, Department of Mechanical Engineering,

University of Alberta - The role of additive manufacturing in the fight against

COVID-19; • Scott MacKenzie, Senior National Manager of External Affairs, Toyota Motor

Manufacturing Canada – Maintenance at TMMC Plants with a Focus on the Environment; • Martha Myers, Founder and Owner, Martha Myers Consulting Service –

Importance of Networking and Education in Maintenance; • Doc Palmer, Managing Partner, Richard Palmer and Associates Inc – Focus on

Scheduling and Planning of Maintenance; • James Reyes-Picknell, President, Conscious Asset – Managing Maintenance and Reliability; • Shawn Casemore, President, Casemore and Co Inc – Engaging Your Employees in a Safety Culture; and • Steve Richmond, CEO, Projetech Inc - How the expansion of 5G networks can benefit maintenance and repair operations MRO

Mr. O’s Tips

Past Mr. O tips are now available on our web site. We have tips from many industry experts on a wide variety of MRO related topics.

• Do not be afraid of change; • Increase affordability and efficiency with cloudbased EAM systems; • Sustaining our environment with maintenance; • Ramping up from your COVID-19 slow-down; • Planners: The underestimated safety heroes; • Online networking during COVID-19; • Asset information management; • Don’t lose productivity during COVID-19, gain it; • The first step toward building a safety culture; and, • Many more.

clipper seals

cnc machined seals

labyrinth seals rotary shaft seals

heavy duty seals

o-rings